01
Height Safety Lifting Load Control Safety Management FALL ARREST BLOCKS AND RECOVERY DEVICES Technical Data Sheet
SpanSet Australia Ltd 13 Pullman Place Emu Plains NSW 2750 Australia Telephone +61 2 4735 3955 Fax +61 2 4735 3630 E-mail
[email protected] Internet www.spanset.com.au
SpanSet—Data Sheet––Fall Arrest Blocks and Recovery Devices
1 of 101.007-5/3-14
Saverline SVLB-2 and SVLB-3 Fall Arrest Blocks SVLB-2 Product Data Saverline SVLB-2 2m Fall Arrest Block
Saverline SVLB-3 3m Fall Arrest Block
Lifeline Material
Webbing
Lifeline Length
2m
Lifeline Width
18mm
Weight
0.7kg
Capacity Load
150kg
Dimensions
485 x 70 x 66mm (including karabiners)
Connection
Triple Action Swivel Karabiner
Arrest Force
4kN
Minimum Breaking Load
15kN
Body Material (ext)
Composite UV Stabilised Housing
Chassis Material (int)
Steel
Certification
AS1891.3:1997 / EN 360
Independent Brake Pawls
BCS-Brush Cleaning System
The two hardened stainless steel pawls work independently of one another, this ensures a “failsafe” capability if one should stop working.
The entry aperture has two opposing brushes which helps to minimise the take up of debris into the block.
Load Bearing Steel Chassis The chassis comprises of two hot rolled steel hangers which give the block its unique strength.
SBM— Sealed Brake Module The Brake Module is sealed by the use of “O” rings which stops water and dust ingress affecting the brakes efficiency.
SVLB-3 Product Data Lifeline Material
Webbing
Lifeline Length
3m
Lifeline Width
19mm
Weight
1.1kg
Capacity Load
150kg
Dimensions
685 x 105 x 80mm (including karabiners)
Connection
Triple Action Swivel Karabiner
Arrest Force
4kN
Minimum Breaking Load
15kN
Body Material (ext)
Composite UV Stabilised Housing
Chassis Material (int)
Steel
Certification
AS1891.3:1997 / EN 360
SpanSet—Data Sheet––Fall Arrest Blocks and Recovery Devices
2 of 101.007-5/3-14
Saverline SVLB-10 and SVLB-18 Fall Arrest Blocks SVLB-10 and SVLB-18 Product Data Lifeline Material
Galvanised zinc wire rope
Lifeline Length
10m 18m
Lifeline Size (width)
4.5mm [19:7]
Weight
4.1kg [10m] 6.5kg [18m]
Capacity Load
136kg
Dimensions
244 x 183 x 144mm (excluding karabiners) 300 x 226 x 144mm (excluding karabiners)
Connections
Triple action karabiner
Body Material (ext)
UV stabilised PC/ABS (Polycarbonate/Acrylonitrile Butadiene Styrene)
Chassis Material (int)
Plastic/Steel
Certification
EN 360 PC/ABS high strength and rigidity UV stabilised (Polycarbonate/ Acrylonitrile Butadiene Styrene)
External Housing
The PC/ABS housings give the block its lightness and exceptional strength, these housings give support and enclose the mechanical assembly Polyamide 6 Glass Filled
Drum
The glass filled nylon drum which has alloy plates and polyamide bearings accepts all three types of lifeline without any additional parts
Chassis
Hot rolled steel, zinc plated black Aluminium alloy T6 hard anodised
Pawl Plate
Manufactured from aluminium alloy T6 and hard anodised, this plate retains the hardened stainless pawls and spindles.
Ratchet
Aluminium alloy T6 hard anodised
The two hardened stainless steel pawls work independently of one another, this ensures a “failsafe” capability if one should stop working.
Pawls
Hardened stainless steel
Bearings
Polyamide with PTFE (Polytetrafluoroethene)
Shaft
Aluminium alloy T6 hard anodised
Load Bearing Steel Chassis
All Fixings
Stainless steel
Sealed Brake
The brake module is a stainless/alloy unit which can be easily replaced after a fall, the O-rings provide a seal from dust and water ingress
Swivel Hook
Aluminium alloy, rated to 25kN
Independent Brake Pawls
The chassis comprises of two hot rolled steel hangers which give the block its unique strength.
BCS-Brush Cleaning System The entry aperture has two opposing brushes which helps to minimise the take up of debris into the block.
SBM— Sealed Brake Module The mrake module is sealed by the use of O-rings which stops water and dust ingress affecting the brakes efficiency. SpanSet—Data Sheet––Fall Arrest Blocks and Recovery Devices
3 of 101.007-5/3-14
Saverline SVLB-30 and SVLB-40 Fall Arrest Blocks SVLB-30 and SVLB-40 Product Data Lifeline Material
Galvanised zinc wire rope
Lifeline Length
30m 40m
Lifeline Size (width)
4.5mm [19:7]
Weight
12kg [30m] 12.9kg [40m]
Capacity Load
136kg
Dimensions
688 x 281 x 207 (including karabiners)
Connections
Triple action karabiner
Body Material (ext)
UV stabilised PC/ABS (Polycarbonate/Acrylonitrile Butadiene Styrene)
Chassis Material (int)
Plastic/Steel
Certification
EN 360 PC/ABS high strength and rigidity UV stabilised (Polycarbonate/ Acrylonitrile Butadiene Styrene)
External Housing
The PC/ABS housings give the block its lightness and exceptional strength, these housings give support and enclose the mechanical assembly Polyamide 6 Glass Filled
Drum
The glass filled nylon drum which has alloy plates and polyamide bearings accepts all three types of lifeline without any additional parts
Chassis
Hot rolled steel, zinc plated black Aluminium alloy T6 hard anodised
Independent Brake Pawls The two hardened stainless steel pawls work independently of one another, this ensures a “failsafe” capability if one should stop working.
Pawl Plate
Manufactured from aluminium alloy T6 and hard anodised, this plate retains the hardened stainless pawls and spindles.
Ratchet
Aluminium alloy T6 hard anodised
Pawls
Hardened stainless steel
Bearings
Polyamide with PTFE (Polytetrafluoroethene)
Shaft
Aluminium alloy T6 hard anodised
All Fixings
Stainless steel
Sealed Brake
The brake module is a stainless/alloy unit which can be easily replaced after a fall, the O-rings provide a seal from dust and water ingress
Swivel Hook
Aluminium alloy, rated to 25kN
Load Bearing Steel Chassis The chassis comprises of two hot rolled steel hangers which give the block its unique strength.
BCS-Brush Cleaning System The entry aperture has two opposing brushes which helps to minimise the take up of debris into the block.
SBM— Sealed Brake Module The mrake module is sealed by the use of O-rings which stops water and dust ingress affecting the brakes efficiency. SpanSet—Data Sheet––Fall Arrest Blocks and Recovery Devices
4 of 101.007-5/3-14
Latchways Self-Retracting Lifeline Product Description Fall arrest Personal Fall Protective Equipment (PFPE) is used to arrest a worker in the event of a fall and limit forces applied to the worker and the point of anchorage. A PFPE fall arrest system comprises of a body support element (fall arrest full body harness), a connecting element (fall arrest lanyard with built in energy absorber), a connector (karabiner/hook) and an anchorage (lifeline/ anchor). The ManSafe® SRL is intended to be used as a connecting element within a personal fall arrest system. The ManSafe® SRL includes a self-locking function and automatically extends and retracts providing the user with freedom of movement over a large working area. The ManSafe® SRL is to be used where user mobility is required and fall protection is needed (inspection work, general construction and maintenance work etc).
Key Features –– The Full Contact™ locking mechanism is constantly moving therefore cannot freeze, hang up or corrode. This ensures failsafe performance that is verified by the audible clicking noise –– Anti-Racheting ensures functionality on any overhead fall protection system
–– The integral, in-line, tear-web energy absorber, absorbs energy at a Constant Force® and gives a true indication of impact. All internal components are manufactured from materials with high corrosion resistant properties –– All moving parts are coated or impregnated with Polytetrafluoroethylene (PTFE) for lubrication –– The toughened case is designed to resist impact damage and protect internal chassis –– The modular design allows for quick and easy recertification ensuring minimal time out of action –– All ManSafe® SRLs are individually serial numbered to ensure full traceability.
Quality Control X-ray inspection of cast components 100% gauge inspection Batch conformance test – dynamic strength 100% visual inspection Batch conformance test – static strength 100% function and lock tested
General Information –– Before each use ensure that a clicking sound can be heard when the lifeline is extracted and retracted. Additionally ensure that the device locks up when the lifeline is pulled sharply. This indicates that the locking mechanism is functioning correctly –– Ensure that the SRL is only used for overhead applications. The SRL should not be used at an angle greater than 30º from the vertical. Never use the SRL for horizontal applications –– Always ensure that the SRL is attached to an anchorage point capable of sustaining minimum anchorage strength of 15kN –– Always be aware of sharp edges, or obstacles that prevent the correct orientation of the lifeline when connecting the SRL to the anchorage point –– The SRL is a single user device. Only one user should be attached to the SRL at any one time –– The SRL must only be recertified by a Latchways approved recertification engineer. A full recertification must be conducted within two years of manufacture and annually thereafter.
Production conformance test
Materials Pawl and Ratchet Module
Hard Lubricated Stainless Steel
CF® Absorber Module
Stainless Steel and Impact Modified Nylon
Motor Spring
Stainless Spring Steel
Static Strength
> 15kN
SpanSet—Data Sheet––Fall Arrest Blocks and Recovery Devices
5 of 101.007-5/3-14
Latchways Self-Retracting Lifeline Latchways LW Series 3.6m Self-retracting Lifeline
LW Series 3.6m Product Data Lifeline Material
Polyester webbing
Lifeline Length
3.6m [LW62004] 7m [LW62207]
Lifeline Size (width)
20mm [LW62004] 25mm [LW62207]
Weight
1.9kg [LW62004] 3.8kg [LW62207]
Capacity Load
140kg
Dimensions
221 x 142 x 99mm [LW62004] 275 x 185 x 125mm [LW62207]
Connection
Stainless steel and aluminium
Body Material (ext)
Impact modified nylon
Chassis Material (int)
Stainless steel
Certification
BS EN 360:2002, ANSI Z359.1-2007 OSHA 1910.66, OSHA 1926.502 CSA Z259.2.2-98, ISO 9001
Latchways LW Series 7m Self-retracting Lifeline
Product Data Lifeline Material
Galvanised steel wire [LW62407] [LW62410] [LW62415] Stainless steel wire [LW62207] [LW62210] [LW62215]
Lifeline Length
7m [LW62407] [LW62207] 10m [LW62410] [LW62210] 15m [LW62415] [LW62215]
Lifeline Size (width)
7:19
Weight
4.9kg [LW62407] [LW62207] 5.6kg [LW62410] [LW62210] 7.4kg [LW62415] [LW62215]
Capacity Load
140kg
Dimensions
330 x 170 x 122mm [LW62407] [LW62207] 357 x 185 x 125mm [LW62410] [LW62210] 396 x 215 x 130mm [LW62415] [LW62215]
Connection
Stainless steel and forged steel
Body Material (ext)
Impact modified nylon
Chassis Material (int)
Stainless steel
Certification
BS EN 360:2002, ANSI Z359.1-2007 OSHA 1910.66, OSHA 1926.502, CSA Z259.2.2-98, ISO 9001
SpanSet—Data Sheet––Fall Arrest Blocks and Recovery Devices
6 of 101.007-5/3-14
Latchways Self-Retracting Lifeline
Product Data Lifeline Material
Galvanised steel Wire [LW62809] [LW62815] [LW62825] [LW62840] Stainless Steel Wire [LW62810] [LW62816] [LW62826] [LW62841]
Lifeline Length
9m [LW62809] [LW62810] 15m [LW62815] [LW62816] 25m [LW62825] [LW62826] 40m [LW62840] [LW62841]
Lifeline Size (width)
7:19
Weight
9m [LW62809] [LW62810] 15m [LW62815] [LW62816] 25m [LW62825] [LW62826] 40m [LW62840] [LW62841]
Capacity Load
140kg
Dimensions
240 x 240 x 180mm [LW62809] [LW62810] 280 x 280 x 200mm [LW62815] [LW62816] 330 x 330 x 200mm [LW62825] [LW62826] 380 x 380 x 215mm [LW62840] [LW62841]
Connection
Stainless steel and forged steel
Body Material (ext)
Aluminium and stainless steel
Chassis Material (int)
Aluminium and stainless steel
Certification
BS EN 360:2002, ANSI Z359.1-2007 OSHA 1910.66, OSHA 1926.502 CSA Z259.2.2-98, ISO 9001
SpanSet—Data Sheet––Fall Arrest Blocks and Recovery Devices
7 of 101.007-5/3-14
Saverline SVLRB-30 and SVLRB-40 Fall Arrest Blocks These fall arrest blocks with recovery adds a recovery/rescue function to the lightweight Saverlines, and are the lightest recovery blocks in their class, offering exceptional portability and also significantly safer and easier installation. The FABXLR functions as a standard fall arrest block, but in the event of a fall, the rewind/rescue mechanism can be engaged to raise and/or lower a fallen worker.
SVLRB-30 and SVLRB-40 Product Data Lifeline Material
Galvanised zinc wire rope
Lifeline Length
30m 40m
Lifeline Size (width)
4.5mm [19:7]
Weight
12.6kg [30m] 13.4kg [40m]
Capacity Load
136kg
Dimensions
688mm x 281mm x 305mm [30m and 40m]
Connections
Triple action karabiner
Body Material (ext)
UV stabilised PC/ABS (Polycarbonate/Acrylonitrile Butadiene Styrene)
Chassis Material (int)
Plastic/Steel
Certification
EN 360 PC/ABS high strength and rigidity UV stabilised (Polycarbonate/ Acrylonitrile Butadiene Styrene)
External Housing
The PC/ABS housings give the block its lightness and exceptional strength, these housings give support and enclose the mechanical assembly Polyamide 6 Glass Filled
Drum
The glass filled nylon drum which has alloy plates and polyamide bearings accepts all three types of lifeline without any additional parts
The two hardened stainless steel pawls work independently of one another, this ensures a “failsafe” capability if one should stop working.
Chassis
Hot rolled steel, zinc plated black
Pawl Plate
Manufactured from aluminium alloy T6 and hard anodised, this plate retains the hardened stainless pawls and spindles.
Load Bearing Steel Chassis
Ratchet
Aluminium alloy T6 hard anodised
The chassis comprises of two hot rolled steel hangers which give the block its unique strength.
Pawls
Hardened stainless steel
Bearings
Polyamide with PTFE (Polytetrafluoroethene)
Shaft
Aluminium alloy T6 hard anodised
All Fixings
Stainless steel
Sealed Brake
The brake module is a stainless/alloy unit which can be easily replaced after a fall, the O-rings provide a seal from dust and water ingress
Swivel Hook
Aluminium alloy, rated to 25kN
Independent Brake Pawls
BCS-Brush Cleaning System The entry aperture has two opposing brushes which helps to minimise the take up of debris into the block.
SBM— Sealed Brake Module
Aluminium alloy T6 hard anodised
The mrake module is sealed by the use of O-rings which stops water and dust ingress affecting the brakes efficiency. SpanSet—Data Sheet––Fall Arrest Blocks and Recovery Devices
8 of 101.007-5/3-14
SVLRB-15 3 Way Retracting Lifeline/Recovery Device This self retracting lifeline offers fall protection when entering or exiting confined spaces. Anchored above the user, it provides a safe area of work. The retracting line pays in and out of the device as the user moves.
SVLRB-15 3 Way Retracting Lifeline
Maximum Working Load Capacity
150kg
In the event of a fall a brake engages, arresting the fall of the user with a controlled deceleration force. Additional feature of an easy to deploy emergency winch function It has an aluminium casing, giving a robust yet lightweight performance. The swivel fall indicator hooks are standard.
Weight
10.4kg
This 3 way can be mounted onto a tripod or davit arm for access and egress from a confined space. An individual serial number is stamped on the swivel eye on the top of the device.
Certifications
Description
Cable Material
Galvanised Steel
Casing Material
Cast Aluminium
Cable Length
SpanSet—Data Sheet––Fall Arrest Blocks and Recovery Devices
15m BSEN360:2002 BSEN1496
9 of 101.007-5/3-14
Training Courses Height Safety Working Safely at Height Working Safely at Heights Refresher Height Safety Supervisor* Height Safety Manager*
Rescue Rescue Systems Operator* Vertical Rescue* Tower and Pole Rescue* Wind Access Rescue Technician* EWP Emergency Escape Gotcha Rescue
Confined Space Confined Space* Confined Space - Refresher* Breathing Apparatus* Confined Space Non-Entry Rescue*
Inspection Competent Person Practical Inspection and Record Keeping*
*
SpanSet Accreditations ISO 9001:2008 Certified Quality Management System
Certified manufacturer to AS/NZS 1891.1 “Industrial Fall Arrest Systems and Devices”
ISO 14001:2004 Certified Environment Management System
Certified manufacturer to AS/NZS 1353.1 ”Flat Synthetic Webbing Slings”
OHSAS 18001:2007 Certified Occupational Health and Safety Management Systems
Certified manufacturer to AS/NZS 4497.1 “Round Slings—Synthetic Fibre”
SAI Global Lic: SMK40056 SMK40060 SMK40061 SMK40062
Australian/New Zealand Standard 4801:2001 certified Occupational Health and Safety Management Systems 5 Tick Certified Product Accredited Laboratory Tested by NATA to ISO/IEC 17025 ASQA Registered Training Organisation certified to ISO 9001:2008
Environment ISO 14001:2004 Lic: CEM21958
SpanSet—Data Sheet––Fall Arrest Blocks and Recovery Devices
Health & Safety AS 4801:2001 Lic: OHS21464
Quality ISO 9001:2008 Lic: QEC5088
Health & Safety OHSAS 18001:2007 Lic: OHS21464
10 of 101.007-5/3-14