Finish with Style with the Finista range Finish your next project with style by integrating the new Finista range of products from Lincoln Sentry. Finista is a range of stylish solutions for the kitchen, bathroom, wardrobe, laundry and office. This new range of Finista products have been sourced from all over the globe and will allow you to offer your customers a selection of products that will “finish with style” your next project.
Wardrobe & Laundry Solutions Wardrobe Rail Solutions M.2 Wardrobe Accessories M.4 FEG Wardrobe System M.9 Ironing Boards M.16 Laundry Accessories M.17 Vents M.19
Office, Shop & Wardrobe Systems
M
LINCOLN SENTRY
OFFICE, SHOP & WARDROBE SYSTEMS
M.1 A.2
Wardrobe & Laundry Solutions WARDROBE RAIL SOLUTIONS ROUND TUBE RAIL Qty 10
Finish White Stainless Steel Chrome Plated Chrome Plated
ø
Tube Ø 25mm 19mm 19mm 25mm
Length 4m 3m 3.6m 3.6m
Code 1-491-170 1-491-181 1-491-186 1-491-188
CHROME FLANGE TO SUIT ROUND TUBE RAIL Features:
Office, Shop & Wardrobe Systems
• •
Suits round tube rail 1-490-250 has 200 per box Qty 100
ø
c/c
Finish Chrome Plated Chrome Plated
Suits Tube Ø 19mm 25mm
C/C 36mm 45mm
Code 1-490-190 1-490-250
WHITE FLANGE TO SUIT ROUND TUBE RAIL •
Suits 25mm round tube rail (1-491-188, 1-491-170)
Qty 1000
ø
c/c
Finish White Plastic
Suits Tube Ø 25mm
C/C 36 mm
Code 1-490-251
CENTRE PILLAR TO SUIT ROUND RAIL
M
•
Suits round tube rail
c/c
Qty 100
ø
Finish Chrome Plated Chrome Plated
Suits Tube Ø 19mm 25mm
C/C 36mm 42mm
Code 1-490-192 1-490-252
END PILLAR TO SUIT ROUND RAIL Features: • •
c/c
Suits round tube rail 1-149-254 has 50 pieces per box Qty 100
ø
M.2
OFFICE, SHOP & WARDROBE SYSTEMS
Finish Chrome Plated Chrome Plated
Suits Tube Ø 19mm 25mm
Dimension data and specifications may change without notification.
C/C 36mm 42mm
Code 1-490-194 1-490-254
s Hanger Accessories
Wardrobe & Laundry Solutions 20
3
10
44.8
22
WARDROBE RAIL SOLUTIONS 15.6
OVAL TUBE RAIL
13
Features: • •
25.5 15.1
Finish Chrome Plated White Powder Coat Bright Chrome
15 15
Material Steel Aluminium Aluminium
Length 3.6m 4m 3.6m
Code 1-491-195 1-491-191 1-491-196
Features:
46 screw-on
type 3.8
32
11
22 10
44.8 30.5
75
15
12
16 15.6
13
15
knock-in
3
15
Suits oval tube rail Knock-in version suits system 32 1-490-300 has 50 pieces per bag
12
Finish White Plastic Chrome Plated Chrome Plated
15
Wardrobe Fittings
20
• • •
Qty 100
Style Screw-on Knock-in Screw-on
Code 1-490-300 1-490-350 1-490-400
CENTRE PILLAR TO SUIT OVAL RAIL •
ype 3.8
46 32
ted, ckel, bronze
11
M
3.4
30.5
43
75
25.5 15.1
Suits oval tube rail
Office, Shop & Wardrobe Systems
FLANGE TO SUIT OVAL RAIL
s Hanger Accessories
ted, ckel, bronze ted, ckel, bronze
Aluminium tubing has 5 per bundle Steel (1mm thick) tubing has 10 per bundle
3.4
30 43
ted, ckel, bronze
15 6.7
16
Finish Chrome Plated
Suits Tube Oval
C/C 32mm
Code 1-490-430
C/C 32mm
Code 1-490-431
297 END PILLAR TO SUIT OVAL RAIL
FOUR WINDS CORPORATION | www.fourwinds.com.tw
•
3.8
type
11
16
15
15
30.5
75
ted, ckel, bronze
LINCOLN SENTRY
Finish Chrome Plated
Wardrobe Fittings
46 32
Suits oval tube rail
Suits Tube Oval
OFFICE, SHOP & WARDROBE SYSTEMS
M.3 A.2
Wardrobe & Laundry Solutions WARDROBE ACCESSORIES
N INSTRUCTIONS
100D , A04245D~A04300D
1pc
C*1pc
AMBOS SUPER LIFT WARDROBE HANGER Features: • • • • •
Hydraulic device Adjustable arm verticality Steel mechanism Grey/chrome finishes Load capacity 20kg min 75cm - max 115cm
76cm
29cm
91cm
Office, Shop & Wardrobe Systems
51cm
20 kg
5.5cm Note: Unit setback from the cabinet edge is 37mm
Step 3:
Description Ambos Super Lift Hanger
Internal Cabinet Width 750mm-1150mm
Code 1-490-450
Description Ambos Super Lift Spacer
Size 20mm
Code 1-490-452
FINISTA DRAWER PULLOUT Features:
Y=The thickness of cabinet panel.
M
• • • • •
All baskets come with front attachment bracket as standard Soft close runners Load capacity = 40kg Kit includes: 1 x basket, 2 x runners, 1 x front attachment bracket (pair) Suits 16-19mm board
Finished
Drawer Height 135mm 135mm 135mm 200mm 200mm 200mm
M.4
OFFICE, SHOP & WARDROBE SYSTEMS
External Cabinet Width 450mm 600mm 900mm 450mm 600mm 900mm
Internal Cabinet Height 160mm min. 160mm min. 160mm min. 225mm min. 225mm min. 225mm min.
Dimension data and specifications may change without notification.
External Cabinet Depth 515mm min. 515mm min. 515mm min. 515mm min. 515mm min. 515mm min.
Basket
Code
Chrome Chrome Chrome Chrome Chrome Chrome
1-471-020 1-471-021 1-471-022 1-471-023 1-471-024 1-471-025
Wardrobe & Laundry Solutions WARDROBE ACCESSORIES FINISTA PULLOUT PANT RACK Features: • • • •
Soft close runner Housing: aluminium with satin chrome finish Rails: steel with satin chrome finish Suits 16-19mm board
X
Internal Cabinet Depth 400mm min. 400mm min. 400mm min.
Rails 7 10 17
Code 1-472-002 1-472-003 1-472-004
Rails 10
Code 1-472-005
Pairs 4-6 10-12
Code 1-472-000 1-472-001
FINISTA SLIDE OUT PANT RACK Features: • • •
Universal left or right installation Housing: steel with satin chrome finish Rails: steel with satin chrome finish
External Cabinet Width 450mm min
Internal Cabinet Depth 480mm min.
Office, Shop & Wardrobe Systems
External Cabinet Width (X) 450mm 600mm 900mm
M
FINISTA PULLOUT SHOE RACK Features: • • • • •
Soft close runner Attaches to side of cabinet Chrome finish Can install multiple rows above each other Suits 16-19mm board
External Cabinet Width (X) Internal Cabinet Depth 600mm 550mm min. 900mm 550mm min. LINCOLN SENTRY
OFFICE, SHOP & WARDROBE SYSTEMS
M.5 A.2
Wardrobe & Laundry Solutions WARDROBE ACCESSORIES FINISTA SLIDE OUT ROD Features: • • • 28.
Universal left or right installation Steel with satin chrome finish Great for hanging clothes hangers on
8
350
Internal Cabinet Width 50mm min
Office, Shop & Wardrobe Systems
80.5
Internal Cabinet Depth 385mm
Code 1-472-010
FINISTA SLIDE OUT BELT RACK Features: • •
Universal left or right installation Steel with satin chrome finish
56 350
Internal Cabinet Width 100mm min
87.5
Internal Cabinet Depth 385mm
Positions 7
Code 1-472-011
Positions 16
Code 1-472-012
FINISTA SLIDE OUT TIE RACK Features: • •
M
Universal left or right installation Steel with satin chrome finish
60 350
78.2
Internal Cabinet Width 100mm min
Internal Cabinet Depth 385mm
TIE RACK - SLIDE RAIL Features: • • • •
Screw-on side mount Slide out rail for easy access Length: 360mm Holds 23 ties
Finish Satin Chrome / Black Plastic
M.6
OFFICE, SHOP & WARDROBE SYSTEMS
Dimension data and specifications may change without notification.
Code 1-491-155
Wardrobe & Laundry Solutions WARDROBE ACCESSORIES COAT RACK - 5 HOOKS Features: • • •
Universal left or right installation Chrome finish Screws included
75mm 65mm
Depth 30mm
Height 52mm
Code 1-490-272
HAT & COAT HOOK •
75mm projection
Finish Chrome Plated
Code 1-490-270
Office, Shop & Wardrobe Systems
Width 350mm
M
WARDROBE SUSPENSION SUPPORT BRACKET Features: • •
Load carrying capacity 130kg per wall cupboard System 32
Qty 100
Finish White Powder Coat White Powder Coat LINCOLN SENTRY
Type Left Hand Right Hand
Code 1-491-230 1-491-240 OFFICE, SHOP & WARDROBE SYSTEMS
M.7 A.2
Walk-in wardrobes with Italian style The FEG system is an exceptional concept for walk-in wardrobes. FEG offers a complete solution that combines hanging drawer unit hardware, hanging rods and clothing accessories to create a wardrobe system that deliveries flexibility during construction and installation. Made in Italy, its unique design creates an open structure that will suit any linear, L-shaped or C-shaped wardrobe composition.
Wardrobe & Laundry Solutions FEG WARDROBE SYSTEM SIDE VERTICAL UPRIGHTS
37.5mm
33mm
15mm
•
For panelling H 2397mm
18mm Description Side Vertical Uprights
Finish Anodised Aluminium
Code 1-611-025
CENTRAL VERTICAL UPRIGHTS 50mm
For panelling H 2397mm
18mm Description Central Vertical Uprights
Code 1-611-026
CORNER VERTICAL UPRIGHTS
47mm
•
For panelling H 2397mm
54mm
18.5mm 19mm
Finish Anodised Aluminium
27mm
Description Corner Vertical Uprights
Finish Anodised Aluminium
Code 1-611-028
SUMMARY DIAGRAM OF VERTICAL UPRIGHTS ASSEMBLY
LINCOLN SENTRY
Office, Shop & Wardrobe Systems
27mm
•
OFFICE, SHOP & WARDROBE SYSTEMS
M
M.9 A.2
PLINTH FOR CARGO
PLINTH EXAMPLE FOR FOOTBOARD W.995 X
Wardrobe & Laundry Solutions FEG WARDROBE SYSTEM PLINTH • • • •
2100mm length Always required for panelling Creates footboard Requires an adjustable foot (1-611-065) in each corner
Description Plinth
508mm
Features:
14.5mm
20mm
19mm
Adjustable foot. Sloted into plinth and fixed to underside of footboard
995mm
Finish Anodised Aluminium
Code 1-611-038
Finish Grey Plastic
Code 1-611-039
PLINTH END CAP
Office, Shop & Wardrobe Systems
•
Clip on
Description Plinth End Cap
SUPPORT FOOT Features: • • •
For panel adjustable in height Recommended 1 piece each per upright See Plinth (1-611-038)
Description Support Foot
M
Finish Galvanised Steel
Code 1-611-040
Finish Steel
Code 1-611-065
Finish Mill Finish
Code 1-611-041
ADJUSTABLE FOOT
57mm
Features: • •
For footboard adjustment One per corner
20mm Description Adjustable Foot
PANEL CLIP Features:
60mm
• •
11.5mm
M.10
OFFICE, SHOP & WARDROBE SYSTEMS
With screws 6 clips required per panel
Description Central Vertical Uprights
Dimension data and specifications may change without notification.
Wardrobe & Laundry Solutions FEG WARDROBE SYSTEM SUPPORT BRACKET - RIGHT 117mm
30mm
Features: • •
Right bracket Includes caps
34mm
mm
325
20mm Description Support Brackets
Finish Grey Powdercoated Steel
Code 1-611-042
117mm
Features: • •
34mm
325
Left/central bracket Includes caps
mm
20mm Description Support Brackets
Finish Grey Powdercoated Steel
Code 1-611-043
PIN FOR SHELF Features:
24mm
Ø13mm
• • •
Office, Shop & Wardrobe Systems
SUPPORT BRACKETS - LEFT/CENTRAL
30mm
4 pins required per shelf For attaching shelf board to support brackets See M:12 for details
M Description Pin for Shelf
Finish Steel
Code 1-611-044
HANGING KIT 30mm 4mm
Features: • • • •
Hanging kit for drawer unit To suit panelling and non panelling For attaching drawer unit to panelling or frame See M:12 for details
Description Hanging Kit LINCOLN SENTRY
Finish Steel
Code 1-611-045 OFFICE, SHOP & WARDROBE SYSTEMS
M.11 A.2
Wardrobe & Laundry Solutions FEG WARDROBE SYSTEM SHELF ASSEMBLY 1. 2. 3. 4.
Fit the fastening pins to the shelf. Drop the shelf into position between the support brackets. Insert the closing caps as shown in the drawing below. Use fastening screw to the back closing cap to avoid accidental removal of shelf.
Fastening pin Fastening screw
1
Office, Shop & Wardrobe Systems
Rear cap with hole for middle closing Fastening screw
Front cap without hole for middle closing
4 2 Rear cap with hole for side closing
Front cap without hole for side closing
ASSEMBLY OF HANGING DRAWER UNITS Drawer units are hung by the support brackets. A hanging kit is used to fasten the top of the drawer unit to the bracket. A spacer adjustment is used at the rear to level the drawer unit. 1. Fit the relevant spacer (depending on panel or non-panel version) on the back of the drawer unit. 2. wardrobe Adjust with to determine drawer level. Short spacer for walk-in panelling IMPORTANT: Hanging drawer unit should not be mounted in front of glass/mirror panelling or soft vinyl panelling.
M Short spacer for walk-in wardrobe with panelling
Long spacer for walk-in wardrobe without panelling
Long spacer for walk-in wardrobe without panelling
M.12
OFFICE, SHOP & WARDROBE SYSTEMS
Dimension data and specifications may change without notification.
Wardrobe & Laundry Solutions FEG WARDROBE SYSTEM CLOTHES RAIL
30mm
Features:
15mm
75mm
20mm
18mm
• •
To suit nominal space of 995mm Actual length 993mm
Description Clothes Rail
Finish Grey Powdercoated Steel
Code 1-611-059
Finish Grey Powdercoated Steel
Code 1-611-055
Finish Grey Plastic
Code 1-611-056
RAIL SUPPORT BRACKET •
Suits clothes rail
RAIL SUPPORT CAP Features: • •
End cap for rail support bracket Required for exposed ends
Description Rail Support Cap
ASSEMBLY OF HANGING RAILS 1. 2.
If fitting a clothes rail, fit the rail support into underside of the support bracket and fasten with screw supplied. Insert closing caps. Note: Back caps are fastened to the bracket to prevent accidental removal of shelf.
Front cap without hole for middle closing
Office, Shop & Wardrobe Systems
Description Rail Support Bracket
M
Screw 5MA x 35 Front cap without hole for side closing
Screw 5MA x 35
L/H support
Rail holder
LINCOLN SENTRY
Hanging rail for clothes
OFFICE, SHOP & WARDROBE SYSTEMS
M.13 A.2
Wardrobe & Laundry Solutions FEG WARDROBE SYSTEM R/H spacer
ASSEMBLY OF ALUMINIUM FRAME To suit trouser rack / linen baskets: 1. Fasten the right hand and left hand spacers with Blum runners under the shelf, using the screws supplied. 2. Slide the aluminium frame into the runners. 3. Insert either the trouser rack / linen baskets into the aluminium frame. NOTE: Accessory frame includes Blum TANDEM runner.
Sliding guide
Aluminium frame
L/H spacer R/H spacer
Office, Shop & Wardrobe Systems
Self-tapping screw Sliding guide Insert accessories • Pant rack Aluminium frame • Linen baskets • Tray L/H spacer
Self-tapping screw Insert accessories Insert accessories: • Pant rack • Trouser rack • Linen baskets • Linen baskets • Tray
M
Sliding guide
Position 1
Aluminium frame
Position 2
Special screw
Spacer
Sliding guide
Position 1
Aluminium frame
Position 2
M.14
OFFICE, SHOP & WARDROBE SYSTEMS
Dimension data and specifications may change without notification.
Wardrobe & Laundry Solutions FEG WARDROBE SYSTEM 470m
m(D)
PULL OUT FRAME Features: • • •
To suit maximum shelf width 625mm (small) & 975mm (large) Suits trouser racks & linen baskets (see below) Includes Blum TANDEM runners
507mm(W)
470m
m(D)
858mm(W) Width (W) 507mm 858mm
Depth (D) Finish 470mm Anodised Aluminium 470mm Anodised Aluminium
Code 1-611-073 1-611-074
TROUSER RACK •
Requires FEG Pull-Out Frame 1-611-073 (small) or 1-611-074 (large)
420mm
Description Small Trouser Rack Large Trouser Rack
420mm
793mm
395mm Width (W) 395mm 793mm
Office, Shop & Wardrobe Systems
Description Small Pull-Out Frame Large Pull-Out Frame
Depth (D) Finish 420mm Anodised Aluminium 420mm Anodised Aluminium
Code 1-611-075 1-611-076
M
LINEN BASKET •
Requires FEG Pull-Out Frame 1-611-073 (small) or 1-611-074 (large)
395mm
790mm
420mm Description Small Linen Basket Large Linen Basket LINCOLN SENTRY
Width (W) 395mm 790mm
420mm
Depth (D) Finish 420mm Cream Linen 420mm Cream Linen
Code 1-611-079 1-611-080
OFFICE, SHOP & WARDROBE SYSTEMS
M.15 A.2
Wardrobe & Laundry Solutions IRONING BOARDS DRAWER PULLOUT IRONING BOARD Features:
Fasteners: countersunk screws 4.5 x 15 or Euro-screws 6.3 x 13
diagram A X
(h) 30er 40er
74 64
2
h
34
416
32
work area
countersunk screws 4.5 x 15 or Euro-screws 6.3 x 13 cabinet guide slide
2 Assembling guide slide
X = 44 + door cushion face Y = 32 + door cushion face
diagram B
“left / right“ Push the guide with the support bracket across the mounted cabinet slide.
194 cabinet side left / right
11
X
Office, Shop & Wardrobe Systems
guide slide “left / right“ The guide slides are to be positioned in such a way that there are 34 mm between the cabinet front edge and the middle hole of the slide; and from the cabinet upper edge to the middle hole of the slides, there should be 74 mm with a work area stength of 30 mm (work plate area 40 mm = 64 mm) (see diagram A).
X
1 Assembling the cabinet
32
cabinet guide slide screw on backside 400 (450) 304 (354) guide side
32
•
Drawer pullout system Conceals ironing board behind a drawer for easy access Full extension slides Cabinet requirements: external cabinet width: 400mm - 500mm, minimum internal cabinet depth: 510mm, minimum internal cabinet height: 120mm Board size: 950mm x 300mm
50
• • • •
Y
guide with slide with support bracket
3 Assembling Ironing Board
on the Support Bracket The board is placed in the middle of the support bracket. Place the angle support on the front support bracket. Screw the Ironing board and the External Cabinet angle support bracket from Width screw on frontside underneath on the support 400mm bracket in -the500mm front and back. Fasteners: Ironing Cover Cylinder Board head screws M 6.0 - Replacement guide side Washers Screw nut M 6.0
M
ironing board frontis plate
Finish frontis plate White guide side
Code ironing board 1-468-040 guide side 1-467-033 support bracket Cylinder head screws M 6.0
Note: FINISTA VALET Make sure theLAUNDRY slide
angle suppor suppo
movement in smooth before firmly tightening Features: all screws.
• • • •
Wall mount Chrome plated steel frame Adjustable height Holds six items
Length 276mm
M.16
OFFICE, SHOP & WARDROBE SYSTEMS
support bracket support bracket angle support bracket
ironing board
Cylinder head screws M 6.0
Depth 76mm
Dimension data and specifications may change without notification.
Height 268mm
Code 1-472-021
A
A
F
Wardrobe & Laundry Solutions IRONING BOARDS & LAUNDRY ACCESSORIES FINISTA PULLOUT IRONING BOARD Features: • • • • • • •
Universal left or right hand installation Chrome plated steel frame Soft close runner Min cabinet depth 400mm Min cabinet width 200mm Length when folded out 950mm Adjustable feet + or - 65mm
E D
Step 4:Finished
Step 4:Finished Left
Office, Shop & Wardrobe Systems
mm
930-995mm
1380mm
950
Right
340mm
Type Width 140mm
A
Q’ty Depth 340mm
1pc D
Type
Q’ty
Type
Height 1380mm
4pcs E
Type Type Q’t
Q’ty Code 1-472-022
6pcs F
A
M
1pc
FINISTA IRON HOLDER Features: • •
Wall mount Chrome plated steel frame
Width 145mm LINCOLN SENTRY
Depth 130mm
Height 260mm
Code 1-472-020 OFFICE, SHOP & WARDROBE SYSTEMS
M.17 A.2
Wardrobe & Laundry Solutions LAUNDRY ACCESSORIES FINISTA VACUUM CLEANER STORAGE PULLOUT RACK Features: Universal left or right hand installation Chrome plated steel frame Soft close runner Load capacity 40kg Minimum cabinet depth 500mm Minimum cabinet width 400mm
Office, Shop & Wardrobe Systems
• • • • • •
M Width 348mm
Depth 483mm
Height 1150mm
Code 1-472-023
BROOMSTICK HOLDER WITH RUBBER ROLLERS Features: • • •
Material - galvanised steel/rubber Wall mount Suits 23-28mm broomstick
Width 51mm
M.18
OFFICE, SHOP & WARDROBE SYSTEMS
Height 50mm
Dimension data and specifications may change without notification.
Depth 40mm
Code 1-468-045
Wardrobe & Laundry Solutions VENTS ALUMINIUM MULTI-PURPOSE VENT
Cutting Size (L x W) 278mm x 65mm
Overall Size (L x W) 300mm x 80mm
Finish Anodised Aluminium
Code 1-477-900
Finish White Black
Code 1-477-912 1-477-909
CUPBOARD VENT - ROUND •
Plastic
Overall Size Ø 40mm Ø 40mm
MEDIUM CUPBOARD VENT - RECTANGULAR •
Plastic
Cutting Size (L x W) 124mm x 60mm
Overall Size (L x W) 135mm x 80mm
Finish White
Code 1-477-915
LARGE CUPBOARD VENT - RECTANGULAR •
Office, Shop & Wardrobe Systems
Cutting Size Ø 28mm Ø 28mm
M
Plastic
Cutting Size (L x W) 216mm x 108mm
Overall Size (L x W) 245mm x 130mm
Finish White
Code 1-477-918
Finish White
Code 1-477-921
WALL / DOOR VENT - RECTANGULAR •
Plastic
Cutting Size (L x W) 216mm x 115mm LINCOLN SENTRY
Overall Size (L x W) 230mm x 130mm
OFFICE, SHOP & WARDROBE SYSTEMS
M.19 A.2
