UFO
UFO compact Signal Processing System ®
DiSEqC™ is a registered trademark of the European Telecommunications Satellite Organization (EUTELSAT).
The listed technical data and values were valid at the time this brochure went to press. Subject to technical modification; errors and omissions excepted.
UFO®compact signal processing system
Module carriers Front cover, Amplifier set
4 5-8 9
Control unit
10
Data bus de-multiplexer
11
Software
12
Input splitter
13
Overview channel units FM range amplifier
14-15 16
Sat-TV channel units
17-18
DVB transcoders DVB-S - PAL
19-24
DVB transcoder QPSK - PAL
25-26
Twin DVB-T transcoder COFDM - PAL
27-28
Common Interface retro-fit sets, CA module DVB transcoder DVB-S - FM
29 30
DVB-S(2)-QAM transmodulators
31-36
DVB-S(2)-COFDM transmodulators
37-40
Twin DVB-T transmodulator COFDM - QAM
41-42
TV and DVB-T/TV converters
43-44
TV modulators
45-46
19” cabinet and accessories
47-48
19” accessory mounting rack
48
LCN function
49
Technical appendix
Contents
UFO®compact signal processing system
General
50-51
- C/N on feed system output - S/N on output of PAL modules - Output coupling - Headend system data
IPTVcompactt system Head Office, Service Centre in Germany, Technical Support Service
52-53 56
3
UFO®compact signal processing system
General
With the UFO®compact signal processing system, Kathrein offers an economical and technically well-proven headend to process analogue and digital radio and TV programmes.
The UFO®compact system can be quickly set up and preprogrammed by the antenna specialist before delivery to the installation site.
Installation of the headend is extremely simple.
All standard tuning parameters can be set using the control unit (available separately).
The various module carriers available are dimensioned to enhold either four, six or twelve signal processing modules and are completely pre-mounted and cabled. The control unit is simply connected to the processing module to be tuned using the attached connection cable. The processing modules only have to be inserted, connected and finally programmed as required.
The power supply unit integrated in the module carriers provides all necessary supply voltages. Power supply to the individual modules is undertaken using flexible power supply leads. LNB powering is carried out using a remote feed diplexer (please order separately).
UFO®compact components: Module carriers for four or six modules
for wall-mounting Module carriers for 12 modules for installation in
19” cabinets or for wall mounting
Common Interface (CI) retro-fit sets 4-way input splitter
Control units to programme the modules
Software
Sat-TV channel units
19” installation accessories
DVB transcoders
Accessories for on-wall installation in free-access areas
DVB transmodulators TV and DVB-T converters FM range amplifier and FM converters TV and FM modulators
4
Data bus de-multiplexer
UFO®compact fulfills the requirements of the standards EN 50083 and EN 60065 and is CE and Class A certified.
Module carrier UFG 412 20610090
UFO®compact signal processing system
Module carrier with 12 insert positions
Features Designed for installation in 19” cabinets (e.g. the
Kathrein TUG 100) and for wall-mounting (front cover UFZ 412/D can be ordered separately, if required) Completely pre-assembled, with power supply, extractor
fans, output couplers, input splitters and cabling (if required, amplifier set UFZ 412/V with WFS 27 remote feed diplexer and amplifier 1681330 can be ordered separately) Sufficient heat dissipation is ensured with two extractor
fans, allowing installation also in non-acclimatised rooms or in fully occupied 19” cabinets
Designed to also allow addition of the data bus
de-multiplexer UFX 314 Module carrier of galvanised steel Unit of height: 9 RU For indoor mounting Dimensions (W X H x D) in mm: 483 x 408 x 350
(19” installation depth: 265) Packing unit/weight (pc./kg): 1/12.5
Overall dimensions
5
Module carrier UFG 406 20610111
UFO®compact signal processing system
Module carrier with six insert positions Module carrier with six insert positions
Features Completely pre-assembled, with power supply, output
coupler and cabling (when used in satellite reception systems, LNB remote feeding and input distribution must be separately solved)
Module carrier of galvanised steel, with a detachable,
lockable front cover of coated aluminium For indoor mounting
Broadband output coupler
Dimensions (W x H x D) in mm: 430 x 345 x 270
Possibility to install remote-feed diplexer WFS 31 (Order
Packing unit/weight (pc./kg): 1/4.8
no. 21210022) and input splitter UFZ 300 (Order no. 20610070) (available separately as accessories) Active cooling of the inserted UFO®compact modules
with two extractor fans (pre-assembled, powered by the UFG 406 power supply)
Overall dimensions
6
Module carrier
UFO®compact signal processing system
UFG 404 20610089
Module carrier with four insert positions
Features Completely pre-assembled, with power supply, output
coupler and cabling (when used in satellite reception systems, LNB remote feeding and input distribution must be separately solved)
For indoor mounting Dimensions (W x H x D) in mm: 310 x 325 x 260 Packing unit/weight (pc./kg): 1/5.6
Module carrier of galvanised steel, with a detachable,
lockable front cover of coated aluminium
Note: Some new channel units (e.g. UFO 372/TP or UFO 395) have a higher current drain. Please note the maximum permissible load of the power supply unit.
282
250
Overall dimensions
7
Module carriers Type
UFG 404
UFG 406
UFG 412
Order no.
20610089
20610111
20610090
Wall mounting
Wall mounting
Installation in 19” cabinets and wall mounting ¹)
4
6
12
87.5-862/ 950-2,150
87.5-862/ 950-2,150
87.5-862/ 950-2,150
-
²)
3 x 4-way ²)
Type of mounting Insert positions for single or twin modules Input data Input frequency range
MHz
Input splitter terr./Sat Connection loss (per 4-way splitter)
Terr./Sat
dB
-
-
16
Terr. Sat
dB
-
-
2.5 3.5
V/mA
-
-
18/Max. 600
MHz
5-862
5-862
5-862
1 x 4-way
1 x 6-way
3 x 4-way on 1 x 3-way
dB
Typ. 7.5
Typ. 10
Typ. 14
dBµV
87 77 83 83
84 74 79 79
81 71 77 77
Through loss (per 4-way splitter) Remote feeding for LNB supply
UFO®compact signal processing system
Output data Output frequency range Output coupler Connection loss
Operational output level
PAL ³) 64 QAM 256 QAM FM
Power supply unit Mains voltage
V/Hz
207-253/50-60
198-253/50-60
207-253/47-63
Power consumption max.
W
< 70
< 150
< 250
Secondary voltage/max. permissible current
A
5 V/3.2 12.5 V/2.6 31 V/0.03
5 V/8 12.5 V/6 31 V/0.15
5 V/14.5 12.5 V/10.0 18 V/0.6 31 V/0.11
Overload signalling (red LED) (max. permissible secondary power)
W
-
-
212
-
2
2
General Extractor fan Max. power consumption fan
W
-
2 x 13
2 x 13
Permissible ambient temperature
°C
-20 to +55
-20 to +55
-20 to +50
1) For wall mounting, the UFZ 412/D front cover (20610098) and the amplifier set UFZ 412/V (20610099) are additionally available ²) Extendable with UFZ 300 3) The operational output level of the UFO 394 is 4 dB lower
8
Technical data
Front cover UFZ 412/D 20610098
Front cover for UFO®compact module carrier UFG 412 Made of galvanised and coated sheet steel
UFO®compact signal processing system
Features Dimensions (W X H X D) in mm with UFG 412:
505 x 435 x 360 Packing unit/weight (pc./kg): 1/3.0
Detachable and lockable Only required if the module carrier is to be protected
against unauthorised access
Amplifier set UFZ 412/V 20610099
Features Amplifier set suitable for UFO®compact module carrier
UFG 412
Comprises:
Packing unit/weight (pc./kg): 1/0.35
UFO®compact post-amplifier 1681330 - Gain: 24 dB - Max. output level: 100 dBμV WFS 27 remote-feed diplexer RF connection cables (2 units)
9
Control unit UFG 300 20610082
UFO®compact Signal processing system
Intelligent manual control unit to program the standard setting parameters of the UFO®compact modules.
Features LC display with four lines and 20 characters per line to
display settings and operating parameters 12 ergonomically arranged abrasion-resistant function
buttons to enter channel unit parameters
Control unit powering (5 V/100 mA) is undertaken by the
modules Protection category: IP 50 according to EN 60529 Ambient temperature range: +5 to 50 °C
Direct input of numerical characters
Dimensions (W X H X D) in mm without cable:
220 x 75 x 25
Spiral non-kinking 1.4 m long connection cable with
6-pin mini DIN connection to connect to modules
Packing unit/weight (pc./kg): 1/0.6
USB interface for software update via PC Language change-over German/English/French/Spanish
10
Type Order no.
Current drain (mA)
Voltage supply (V)
Protection category
Ambient temperature range (°C)
UFG 300 20610082
100
5
IP 50 according to EN 60529
+5 to +50
Technical data
Data bus de-multiplexer UFX 314 20610071
UFO®compact signal processing system
Central control of all UFO®compact channel units in a UFG 412 module carrier
Features Each UFO®compact module is individually connected to
the UFX 314 with a control cable Required if the USW 30 software is used, for NIT
matching (cable-NIT), programme filtering, and CAT processing with the UFO 3xx/TP DVB transmodulators Complete set including connection cables to the
modules and fixing material to the UFG 412 module carrier Can be retro-fitted on older UFO®compact systems
(from UFO 335/365 on; required central control unit software version: at least V 9.20, with restrictions from V 7.00) Control of the individual modules with the UFO®compact
control unit or PC/laptop plus USW 30 software Enables the remote control/remote maintenance of
UFO®compact systems using a modem and telephone circuit or a LAN Local operation using the UFO®compact control unit Local operation via USB port using a PC/laptop and the
USW 30 software
Operation via Ethernet interface (locally or via LAN with
TCP/IP protocol) using a PC/laptop and the USW 30 software A modem can be connected to the USB port of the UFX
314 via RS 232 interface using an RS 232 adaptor cable (recommended modems: see USW 30; recommended adaptor cable: adaptor with FTDI or prolific chip set) Up to 2,048 UFX 314 can be connected via one or
more Ethernet splitters (switch/hub), and be commonly controlled in groups of eight units Power supply to the UFX 314 and the control unit that
may be connected to it is effected through a separate connection from the UFG 412 power supply unit Supply voltage: 12.5 V Current drain:
- Approx. 200 mA (without control unit and USB device) - Max. 900 mA (with control unit and USB device) Dimensions (W x H x D) in mm without cable:
384 x 23 x 81 Packing unit/weight (pc./kg): 1/0.7
11
Software USW 30 20610041
UFO®compact signal processing system
Easy-to-use Java software for UFO®compact signal processing systems that are equipped with the UFX 31x data bus de-multiplexer
Features Programming of all channel unit parameters via PC or
Clear display of individual UFO®compact rack
installation set-ups as file cards
laptop Programming of existing UFO®compact systems via
PC or laptop - all settings can be read out, saved and printed Saved programmings can be read into either new
or back-up systems that are assembled in the same manner
Automatic recognition of a connected system Language change-over German/English/French/Spanish System hardware requirements:
Up to eight serially connected systems can be controlled
together
System software requirements:
Remote control/remote maintenance of UFO®compact
systems with PC or laptop via modem and telephone line or via a local area network (LAN)
Recommended modems:
Analogue: “3Com US Robotics Sportster Flash” or “Devolo (formerly Elsa) MicroLink 56k Fun II” ISDN: “Devolo (formerly Elsa) MicroLink ISDN i” GSM: “Siemens MC35”
Photo-realistic on-screen display of the UFO®compact
system
12
Clock frequency of at least 400 MHz 320 MB RAM and 90 MB free hard disk space Graphics card (resolution: 1,280 x 900 pixels)
Operating system: Microsoft Windows 98SE/ME/ NT/2000/XP/Vista/7, Solaris, Linux Java Virtual Machine (JVM): at least version 1.5.0 (supplied)
Delivery scope:
CD, RS 232 null modem cable, USB cable, manual (on CD)
Input splitter, 4-way UFZ 300 20610070
To extend the number of inputs per polarisation or to
retro-fit a system with an additional Sat polarity on the module carrier UFG 412 (Order no. 20610090) Can be used as an input splitter for the UFG 406
UFO®compact signal processing system
Features Easy to install Frequency range: 47-2,150 MHz Distribution loss: 16 dB
(Order no. 20610111) Splitting loss terr./Sat: 2.5/3.5 dB One input, four outputs and a loop-through output to
connect to another UFZ 300 or to an already existing input splitter In combination with input splitters that are already
Dimensions (W x H x D) in mm without cable:
154 x 63 x 40 Packing unit/weight (pc./kg): 1/0.3
integrated, it enables any H/V splitting ratio
Connection example
13
UFO®compact signal processing system Type Order no.
UFX 314 20610071
Designation
Description
Data bus de-multiplexer
Data bus de-multiplexer; to centrally control 12 channel units; retro-fit set for module carriers and for installation in 19” cabinets
FM range amplifier
FM range amplifier; Frequency range: 87.5-108 MHz
Twin Sat-TV channel unit
Twin Sat-TV channel unit VHF/ UHF; input: 2 x 950-2,150 MHz; output: 2 x 110-862 MHz; audio/video interface
Sat-TV channel unit
Sat-TV channel unit VHF/UHF; input: 920-2,150 MHz; output: 47-68/110-862 MHz; audio/video interface
DVB-S transcoder QPSK-PAL
DVB-S transcoder QPSK-PAL; Input: 950-2,150 MHz; Output: 47-68/110-862 MHz; Audio/Video interface
Twin DVB-S transcoder QPSK-PAL
Twin DVB-S transcoder QPSKPAL; two tuners; input: 2 x 9502,150 MHz; output: 2 x 110862 MHz
Twin DVB-S transcoder QPSK-PAL
Twin DVB-S transcoder QPSK-PAL; input: 1 x 9502,150 MHz; output: 2 x 47100/110-862 MHz; one tuner; output channels independently settable; audio/video interface
Quad DVB-S transcoder QPSK-PAL
Quad DVB-S transcoder QPSK-PAL; input: 2 x 950-2,150 MHz; output: 4 x 47-100/110862 MHz; two tuners; 2 x 2 fixed adjacent channels
Twin DVB-T transcoder COFDM-PAL
Twin DVB-T transcoder COFDMPAL; input: 1 x 174-230/470-862 MHz; output: 2 x 47-100/ 110-862 MHz; one tuner; output channels can be set independently
8-way DVB-S transcoder QPSK-FM
Twin DVB-S transcoder QPSKFM; input: two transponders QPSK 950-2,150 MHz; output: eight FM channels 87.5-108 MHz
Page 11 UFO 310 260479 Page 16 UFO 340 20610007 Page 17
UFO®compact signal processing system
UFO 341 20610054 Page 18 UFO 391 20610072 Page 19 UFO 393 20610074 Page 21
UFO 394 20610096 Page 23
UFO 395 20610101 Page 25
UFO 364 20610075 Page 27
UFO 313 20610076 Page 30
14
Overview channel units
UFO®compact signal processing system Designation
UFO 371/TP 20610086
Transmodulator DVB-S(2)-QAM
Page 31
▲ HD-capable
UFO 372/TP 20610084
Twin transmodulator DVB-S(2)-QAM
Page 33
▲ HD-capable
Transmodulator/ UFO 373/MX multiplexer DVB20610087 S(2)-QAM Page 35
UFO 331/TP 20610100 Page 37
▲ HD-capable Transmodulator DVB-S(2)COFDM ▲ HD-capable
Transmodulator/ UFO 333/MX multiplexer DVB20610110 S(2)- COFDM Page 39
UFO 357/TP 20610085 Page 41
UFO 320 260500 UFO 321 260501 Page 43
▲ HD-capable
Description
Transmodulator DVB-S(2)-QAM; input: 950-2,150 MHz; output: 47-100/110-862 MHz; HDTV and DVB-S; transport stream processor; CI retro-fittable Twin DVB-S(2)-QAM transmodulator; input 2 x 950-2,150 MHz; output: 2 x 47-100/110-862 MHz (independently settable); HDTV and DVB-S; transport stream processor DVB-S(2) transmodulator/multiplexer; input: 2 x 950-2,150 MHz; output: 1 x 47-100/110-862 MHz; HDTV and DVB-S; transport stream processor/ multiplexer DVB-S(2)-COFDM transmodulator; input: 950-2,150 MHz; output: 47-100/110-862 MHz; DVB-S and DVB-S2; transport stream processor; retro-fittable CI DVB-S(2) transmodulator/multiplexer (COFDM); input: 2 x 950-2,150 MHz; output: 1 x 47-100/110-862 MHz; HDTV and DVB-S; transport stream processor/multiplexer
Twin DVB-T transmodulator COFDM-QAM
Twin DVB-T transmodulator COFDMQAM; input: 2 x 174-230/ 470-862 MHz; output: 2 x 47-100/110862 MHz (individually settable); transport stream processor
TV converters
UFO 320: UHF-VHF TV converters; input: 470-862 MHz; output: 118-342 MHz UFO 321: TV converter B III-VHF; input: 174-230 MHz; output: 118-342 MHz
UFO 351 20610049 UFO 352 20610055 Page 44
DVB-T TV converters
UFO 351: DVB-T/TV converter BIII/ UHF-UHF; input: 174-230/470-862 MHz; output: 470-862 MHz UFO 352: DVB-T/TV converter B III/UHF-VHF; input: 174-230/470-862 MHz; output: 118-342 MHz
UFM 340 20610047 Page 45
Twin TV modulator
Twin TV modulator VHF/UHF; input: 2 x AV; output: 2 x 110-862 MHz
UFM 341 20610069 Page 46
TV modulator
TV modulator VHF/UHF; input: audio/ video; output: 47-68/110-862 MHz
Overview channel units
UFO®compact signal processing system
Type Order no.
15
FM range amplifier
UFO®compact signal processing system
UFO 310 260479
Features FM range amplifier for installation into UFO®compact
module carriers UFG 3xx/4xx
Four individually adjustable notch filters to attenuate
interfering signals Dimensions (W x H x D) in mm: 265 x 27 x 120
For broadband reception of FM programmes
Packing unit/weight (pc./kg): 1/0.4
Frequency Type Order no. range (MHz)
87.5-108 UFO 310 260479
Gain
Gain setting range
Depth per trap filter
Max. output level ¹)
Noise figure
Current drain
(dB)
(dB)
(dB)
(dBµV)
(dB)
(V/mA)
36
18-36
> 18
110
60 dBµV input level
18
Video/ Audio Audio-IF Max. output audio carrier Current subcarrier bandwidth level/setting level spacing drain frequency main/sub range T1/T2
Input level
DVB Transcoders DVB-S – PAL
UFO®compact signal processing system
UFO 391 20610072
Features DVB-Sat channel unit for installation in the
UFO®compact module carriers UFG 3xx/4xx Transcodes a TV or radio programme from a QPSK-
modulated Sat-transponder into an analogue PAL-TV programme
Digital satellite reception over the wide symbol rate
range of 2-45 MS/s (SCPC and MCPC) Switchable audio/video port (15-pin SubMin-D socket) Adjacent channel compatible
TV standards: B/G, D/K or I
Videotext and VPS insertion
Designed for larger networks with increased system
Audio modes: mono, stereo, dual-/2-tone, dual-A, dual-B
requirements Two inputs A/B, settable using the central control unit
(e.g. for H/V switching) All essential transmission parameters can be set using
the central control unit Direct choice of TV or radio programmes from the
received transponder text on the control unit’s display Automatic format recognition (4:3 or 16:9). In 16:9
reception, optional Letterbox or Pan & Scan conversion Wide-screen signalling (WWS) so that broadcasts
transmitted in 16:9 format are correctly displayed on wide-screen TV sets The output level can be set and switched off using the
control unit
(if two different audio signals are transmitted on one audio-PID) DVB and teletext sub-titling (a control unit with a
software version of at least V 9.20 is required) Teletext de-activation and information bar suppression
(separate (de)activation) Black screen video signal generation for radio on a TV
channel, e.g. in hotels (satellite signal is required for black screen generation) Radio text to show the station name or a user-defined
text Software updates through control unit’s interface Retro-fittable with the UFZ 383 Common Interface to
insert a CA module
19
DVB Transcoders DVB-S – PAL Features, continued Read-out and operation of the CAM menu and selection
Dimensions (W x H x D) in mm: 265 x 27 x 170
of subtitle languages using the OSD of a monitor Packing unit/weight (pc./kg): 1/0.7 Required central control unit software version: at least
V 9.10 (for USW 30: at least V 3.10)
Technical data
Type Order no.
UFO®compact signal processing system
Input 950-2,150 ¹) UFO 391 20610072
Input level
Input data rate
Signal-to-noise ratio ³) S/N weighted
Max. output level/setting range
Video/audio carrier level spacing T1/T2
Current drain
Output 47-68/110-862 ²)
(dBµV)
(MS/s)
(dB)
(dBµV)
(dB)
(V/mA)
Ch
48-85
2-45
61
95/85-95
16/20
5/340 12.5/480 31/9
Frequency range (MHz)
Ch
¹) Settable in 1 MHz steps and fine tuning using AFC ²) Settable in the 7/8 MHz channel grid, fine tuning in 250 kHz steps ³) Channel unit’s intrinsic value (58 dB with 48 channel units)
Block diagram
20
Twin DVB transcoder DVB-S - PAL
UFO®compact signal processing system
UFO 393 20610074
Features DVB-Sat channel unit for installation in UFO®compact
module carriers UFG 3xx/4xx Transcodes two TV or radio programmes from any
transponder into two analogue PAL TV programmes (2 separate front ends) TV standards: B/G, D/K or I Two inputs A/B, settable using the central control unit
(e.g. for H/V switching) All essential transmission parameters can be set using
the central control unit TV or radio programmes from the received transponder
can directly be chosen from text shown on the control unit’s display Automatic format recognition (4:3 or 16:9). In 16:9
reception, optional Letterbox or Pan & Scan conversion Wide-screen signalling (WSS) so that broadcasts
transmitted in 16:9 format are correctly displayed on wide-screen TV sets (a control unit with software version V 9.10 is required) The two output channels are fixed adjacent channels
The levels of the two output channels can be commonly
set and individually switched off via the control unit Digital satellite reception over the wide symbol rate
range of 2-45 MS/s (SCPC and MCPC) Adjacent channel compatible Videotext and VPS insertion Audio modes: mono, stereo, dual-/2-tone, dual-A, dual-B
(if two different audio signals are transmitted on one audio-PID) DVB and teletext sub-titling (a control unit with a
software version of at least V 9.20 is required) Teletext de-activation and information bar suppression
(separate (de)activation; a control unit with software version V 9.10 is required) Black screen video signal generation to insert a radio
programme into a TV channel, e.g. in hotels (possible on both channels; satellite signal is required to generate black screen video signal) Radio text to show the station name or a user-defined
text (a controller with software version V 9.10 is required)
21
Twin DVB transcoder DVB-S - PAL Features, continued Software updates via control unit’s interface
Dimensions (W x H x D) in mm: 265 x 27 x 170
Required central controller software version:
Packing unit/weight (pc./kg): 1/0.7
at least V 8.80 Ambient temperature range for operation in:
- module carrier with extraction fan (UFG 412): -20 to +50 °C - (extension) module carrier without extraction fan (UFG 3xx): -20 to +40 °C
Technical data
UFO®compact signal processing system
Type Order no.
Input 950-2,150 ¹) UFO 393 20610074
Input level
Input data rate
Signal-to-noise ratio ³) S/N weighted
Max. output level/setting range
Video/audio carrier level spacing T1/T2
Current drain
Output 110-862 ²)
(dBµV)
(MS/s)
(dB)
(dBµV)
(dB)
(V/mA)
Ch
55-85
2-45
60
95/85-95
16/20
5/570 12.5/520 31/3
Frequency range (MHz)
Ch
Ch
Ch
¹) Settable in 1 MHz steps, fine tuning via AFC ²) Settable in the 7/8 MHz channel grid, fine tuning in 50 kHz steps ³) Channel unit’s intrinsic value
Block diagram
22
Twin DVB transcoder DVB-S - PAL
UFO®compact signal processing system
UFO 394 20610096
Features DVB-Sat channel unit for installation in UFO®compact
module carriers UFG 3xx/4xx Transcodes two TV or radio programmes from one
transponder into two analogue PAL-TV programmes TV standards: B/G, D/K or I Two inputs A/B, settable using the central control unit
(e.g. for H/V switching) DiSEqCTM1.0 for control of external multi-switches All essential transmission parameters can be set using
the central control unit Direct selection of TV or radio programmes of the
received transponder as their names are displayed on the control unit Automatic format recognition (4:3 or 16:9). In 16:9
reception, optional Letterbox or Pan & Scan conversion Wide-screen signalling (WWS) so that broadcasts
transmitted in 16:9 format are correctly displayed on wide-screen TV sets
Digital satellite reception over the wide symbol rate
range of 2-45 MS/s (SCPC and MCPC) Adjacent channel compatible Switchable audio/video interface (15-pin SubMin-D
socket) in channel unit twin-A Videotext and VPS insertion DVB and teletext subtitling Teletext de-activation and information bar suppression
(separate (de)activation) Audio modes: mono, stereo, dual-/2-tone, dual-A, dual-B
(if two different audio signals are transmitted on one audio-PID) Black screen video signal generation to insert a radio
programme into a TV channel, e.g. in hotels (possible on both channels; satellite signal is required to generate black screen video signal) Radio text to show the station name
or a user-defined text
The two output channels are individually settable
Software updates via control unit’s interface
The levels of the two output channels can be set and
Retro-fittable with the UFZ 394 Common Interface to
switched off individually using the control unit
insert two CA modules
23
Twin DVB transcoder DVB-S - PAL Features, continued Read-out and operation of the CAM menu and selection
of the subtitle languages via the OSD of a monitor Required central control unit software version: at least V
9.30, for USW 30 software: at least 3.3
Ambient temperature range for operation in:
- module carrier with extraction fan (UFG 412): -20 to +50 °C - (extension) module carrier without extraction fan (UFG 3xx): -20 to +40 °C Dimensions (W x H x D) in mm: 265 x 27 x 170
Technical data
UFO®compact signal processing system
Type Order no.
UFO 394 20610096
Frequency range (MHz)
Input level
Input data rate
Signal-to-noise ratio ³) S/N weighted
Max. output level/setting range
Video/audio carrier level spacing T1/T2
Current drain
Input 950-2,150 ¹)
Output 47-100/ 110-862 ²)
(dBµV)
(MS/s)
(dB)
(dBµV)
(dB)
(V/mA)
Ch
Ch Ch
48-85
2-45
60
91/81-91
16/20
5/830 12.5/420 31/6
¹) Settable in 1 MHz steps and fine tuning through AFC ²) Settable in the 7/8 MHz channel raster, fine tuning in 50 kHz steps ³) Channel unit’s intrinsic value (57.5 dB with 48 channel units)
Block diagram
24
Quad DVB transcoder QPSK - PAL
UFO®compact signal processing system
UFO 395 20610101
Features DVB-Sat channel unit for installation in the
UFO®compact module carriers UFG 3xx/4xx Transcodes four TV or radio programmes from two
transponders into four analogue PAL-TV programmes (2 separate front ends, four output channels, 2 x 2 fixed adjacent channels)
The levels of both adjacent channel pairs can be set and
switched off individually using the control unit Digital satellite reception over the wide symbol rate
range of 2-45 MS/s (SCPC and MCPC) Adjacent channel compatible
TV standards: B/G, D/K or I
Videotext and VPS insertion
Two inputs A/B, settable using the central control unit
Audio modes: mono, stereo, dual/2-tone, dual-A, dual-B
(e.g. for H/V switching) All essential transmission parameters can be set using
the central control unit Direct selection of TV or radio programmes of the
received transponder as their names are displayed on the control unit Automatic format recognition (4:3 or 16:9). In 16:9
reception, optional Letterbox or Pan & Scan conversion Wide-screen signalling (WSS) so that broadcasts
transmitted in 16:9 format are correctly displayed on wide-screen TV sets (a control unit with software version V 9.10 is required)
(if two different audio signals are transmitted in one audio-PID) Black screen video signal generation to insert a radio
programme into a TV channel, e.g. in hotels (possible on all four channels; a satellite signal is required for black screen generation) Dynamic SI data processing Software updates through control unit’s interface Retro-fittable with the UFZ 394 Common Interface to
insert two CA modules Required central control unit software version: at least
V 9.50, for USW 30 software: at least V 3.6
The two output channels are fixed adjacent channels
25
Quad DVB transcoder QPSK-PAL Features, continued DiSEqCTM functionality on input A and B, remote feeding
Dimensions (W x H x D) in mm: 265 x 27 x 170
max. 250 mA Packing unit/weight (pc./kg): 1/0.7 Ambient temperature range for operation in:
- module carrier with extraction fan (UFG 412): -20 to +50 °C - (extension) module carrier without extraction fan (UFG 3xx): -20 to +40 °C
Technical data
UFO®compact signal processing system
Type Order no.
UFO 395 20610101
Frequency range (MHz)
Input level
Input data rate
Signal-to-noise ratio ³) S/N weighted
Max. output level/setting range
Video/audio Current drain carrier level without/with spacing UFZ 394 T1/T2
Input 950-2,150 ¹)
Output 47-100/110-862 ²)
(dBµV)
(MS/s)
(dB)
(dBµV)
(dB)
(V/mA/mA)
Ch Ch
Ch Ch Ch Ch
50-85
2-45
60
95/85-95
13/20
5/900/1,300 12.5/750/800 31/9/9
¹) Settable in 1 MHz steps, fine tuning via AFC ²) Settable in the 7/8 MHz channel grid, fine tuning in 50 kHz steps ³) Channel unit’s intrinsic value
Block diagram
26
Twin DVB-T transcoder COFDM - PAL
UFO®compact signal processing system
UFO 364 20610075
Features DVB-T channel unit for installation into the
UFO®compact module carriers UFG 3xx/4xx Transcodes two TV or radio programmes from a
COFDM modulated DVB-T channel into two analogue PAL TV programmes
Adjacent channel compatible Videotext and VPS insertion Audio modes: mono, stereo, dual/2-tone (if two different
audio signals are transmitted on one audio-PID)
TV standards: B/G, D/K or I
DVB and teletext sub-titling
All essential transmission parameters can be set using
Teletext de-activation and LED information bar
the central control unit Direct selection of TV or radio programmes from
the received DVB-T channel from text shown on the controller display Automatic format recognition (4:3 or 16:9). In 16:9
reception, optional Letterbox or Pan & Scan conversion Wide-screen signalling (WWS) so that broadcasts
transmitted in 16:9 format are correctly displayed on wide-screen TV sets The two output channels are individually settable The levels of the two output channels can be set and
switched off individually using the control unit Switchable audio/video interface (15-pin SubMin-D
suppression (separate (de)activation) Black screen generation for radio on a TV channel, e.g.
in hotels (possible in both channels; DVB-T signal is required for black screen generation ) Radio text to show the station name or
a user-defined text Software updates using control unit’s interface Retro-fittable with the UFZ 394 Common Interface to
insert two CA modules Read-out and operation of CAM menu using the OSD of
a monitor Required central control unit software version:
as of V 9.31
socket) in the A channel
27
Twin DVB-T transcoder COFDM - PAL Features, continued Dimensions (W x H x D) in mm: 265 x 27 x 170
Ambient temperature range for operation in:
- module carrier with extraction fan (UFG 412): -20 to +50 °C - (extension) module carrier without extraction fan (UFG 3xx): -20 to +40 °C
Packing unit/weight (pc./kg): 1/0.7
Technical data
Type Order no.
Frequency range (MHz) Input 47-862 ¹)
UFO®compact signal processing system
UFO 364 20610075
Ch
Output 47-100/110-862 ²)
Ch
Ch
Video/audio Current carrier level drain spacing T1/T2
Input level
Signal-to-noise ratio ³) S/N weighted
Max. output level
Setting range output level
(dBµV)
(dB)
(dBµV)
(dBµV)
(dB)
(V/mA)
40-90
60
91
81-91
16/20
5/900 12.5/420 31/6
¹) Settable in the 6/7/8 MHz channel plan, fine tuning in 100 kHz steps ²) Settable in the 7/8 MHz channel plan, fine tuning in 50 kHz steps ³) Channel unit’s intrinsic value
Block diagram
28
Common Interface (CI) retro-fit sets UFZ 383 20610006
Features Common Interface (CI) retro-fit set, for insertion of one
CA module
Retro-fitting can easily be carried out by specialists Packing unit/weight (pc./kg): 1/0.1
Suitable for the UFO 382 and UFO 391 DVB-S
SC CAM
SC
UFO®compact signal processing system
transcoders and for the UFO 353 DVB-T transcoder
UFZ 394 20610097
CAM
CI-Board
Features Common Interface (CI) retro-fit set, for insertion of two
CA modules To retro-fit suitable UFO®compact processing units (see
unit descriptions for compatibility)
Retro-fitting can easily be carried out by specialists Power input e.g. via 2 x AlphaCrypt CA modules:
12.5 V/160 mA, 5 V/70 mA Packing unit/weight (pc./kg): 1/0.25
CA module AlphaCrypt Light
UFZ 100 20410028
Features For DVB-S and DVB-C receivers
Integrated youth protection function
For UFO®compact processing units with a CI retro-fit kit
Software update via satellite
29
8-way DVB transcoder DVB-S - FM
UFO®compact signal processing system
UFO 313 20610076
Features The levels of all output channels can be set and
DVB radio channel unit for insertion into the
switched off using the control unit
UFO®compact module carriers UFG 3xx/4xx
RDS function, automatic or manual
Transcodes eight DVB-S radio programmes from one
or two transponders into eight standard FM stereo radio programmes
RDS function for station name display in RDS capable
FM receivers (standard-conform extraction from data stream or manual entry)
Two inputs A/B, settable using the central control unit
(e.g. for H/V switching)
Software updates through control unit’s interface
All essential transmission parameters can be set using
Required central control unit software: at least V 9.50
the central control unit The output channels can be set individually
Dimensions (W x H x D) in mm: 265 x 27 x 170
Direct selection of TV or radio programmes of the
Packing unit/weight (pc./kg): 1/0.7
received transponder as their names are displayed on the control unit Audio modes: mono, stereo
Technical data
Type Order no.
Frequency range (MHz) Input 9502,150
UFO 313 20610076
30
Ch
Ch
Output 87.5-108
Ch Ch Ch Ch Ch Ch Ch Ch
Sum Disturbing Crosstalk distortion voltage attenuation attenuation ratio
Input level
Input data rate
(dBµV)
(Ms/s)
(dB)
(dB)
50-85
2-45
60
65
Max. output level/setting range
Current drain
(dB)
(dBµV)
(V/mA)
40
91/81-91
5/900 12.5/500 31/9
DVB-S(2) - QAM transmodulator
UFO®compact signal processing system
UFO 371/TP 20610086
Features DVB-S/HDTV channel unit for installation in
UFO®compact module carriers UFG 3xx/4xx To process the signals of a DVB-S transponder or a
HDTV transponder Transmodulates a QPSK modulated DVB-S signal
or 8PSK modulated DVB-S(2) signal into a QAM modulated output signal Two inputs A/B, settable using the central control unit
(e.g. for H/V switching and to build up the cable-NIT for two polarisations)
MPEG transport stream processor:
To set a constant output data rate (Stuffing) with PCR correction With programme filter to remove individual TV and radio programmes (simple setting using USW 30 and UFX 31x) For NIT matching (cable NIT; UFX 31x is additionally required) For CAT matching, e.g. to set the operator-ID
FPGA designed MPEG transport stream processor
and QAM modulator with outstanding MER and roll off attenuation values
DiSEqCTM1.0 to control external multi-switches
Software updates through control unit’s interface
All essential transmission parameters can be set using
Retrofittable with the UFZ 394 Common Interface retro-
the central control unit The output level can be set and switched off using the
control unit Adjacent channel compatible QAM modulator for 16/32/64/128/256 QAM
(factory setting: 64 QAM)
fit set to insert two CA modules Required central control unit software version:
at least V 9.30 Ambient temperature range for operation in:
- module carrier with extraction fan (UFG 412): -20 to +50 °C - (extension) module carrier without extraction fan (UFG 3xx): -20 to +40 °C Dimensions (W x H x D) in mm: 265 x 27 x 170 Packing unit/weight (pc./kg): 1/0.85
31
DVB-S(2) - QAM transmodulator Technical data
Type Order no.
UFO 371/TP 20610086
Frequency range (MHz)
Input level Input data rate
Input 950-2,150 ¹)
Output 47-100/ 110-862 ²)
(dBµV)
Ch
Ch
55-85
(MS/s)
Modulation Output data Error Rate ) rate ³ MER (MS/s)
2-45 (DVB-S) 2.275-7.15 2-30 (DVB-S2)
(dB)
43
Max. output level
Setting range output level
Current drain
(dBµV)
(dBµV)
(V/mA)
5/500 91 (QAM 256) 81-91 (QAM 256) 12.5/750 85 (QAM 64) 75-85 (QAM 64) 31/7
UFO®compact signal processing system
¹) Settable in 1 MHz steps ²) Settable according to 8 MHz channel plan, fine tuning in 250 kHz steps ³) Settable (Stuffing)
Block diagram
32
Twin DVB-S(2) - QAM transmodulator
UFO®compact signal processing system
UFO 372/TP 20610084
Features Twin DVB-S/HDTV channel unit for installation in the
UFO®compact module carriers UFG 3xx/4xx To process the signals of two DVB-S transponders or
two HDTV transponders Transmodulates two QPSK modulated DVB-S or two
8PSK modulated DVB-S(2) signals into two QAM modulated output signals Two inputs A/B, settable using the central control unit
(e.g. for H/V switching and to create the cable-NIT for two polarisations) DiSEqCTM1.0 to control external multi-switches All essential transmission parameters can be set using
the central control unit The two output channels are individually settable The two output levels can be commonly set or
individually switched off using the control unit Adjacent channel compatible
MPEG transport stream processor:
To set a constant output data rate (Stuffing) with PCR correction With programme filter to remove individual TV and radio programmes (easy setting using the USW 30 and UFX 31x) For NIT matching (cable NIT; UFX 31x is additionally required) For CAT matching, e.g. to set the operator-ID
QAM modulator for 16/32/64/128/256 QAM (factory
setting: 64 QAM) FPGA designed MPEG transport stream processor
and QAM modulator with outstanding MER and roll off attenuation values Software updates through control unit’s interface Ambient temperature range for operation in:
- module carrier with extraction fan (UFG 412): -20 to +50 °C - (extension) module carrier without extraction fan (UFG 3xx): -20 to +40 °C Required central control unit software version:
at least V 9.30 Dimensions (W x H x D) in mm: 265 x 27 x 170 Packing unit/weight (pc./kg): 1/1.0
33
Twin DVB-S(2) - QAM transmodulator Technical data
Type Order no.
Frequency range (MHz)
Input 950-2,150 ¹) UFO 372/TP 20610084
Ch Ch
Input level
Input data Output data rate rate ³)
Modulation Error Rate MER
Max. output level
Output level setting range
Current drain
(dBµV)
(dBµV)
(V/mA)
Output 47-100/ 110-862 ²)
(dBµV)
(MS/s)
(MS/s)
(dB)
Ch
55-85
2-45
2.275-7.15
43
Ch
91 (QAM 256) 81-91 (QAM 256) 85 (QAM 64) 75-85 (QAM 64)
5/1,200 12.5/760 31/7
UFO®compact signal processing system
¹) Settable in 1 MHz steps ²) Settable according to 8 MHz channel plan, fine tuning in 250 kHz steps ³) Settable (Stuffing)
Block diagram
34
Transmodulator/multiplexer DVB-S(2) - QAM
UFO®compact signal processing system
UFO 373/MX 20610087
Features DVB-S/HDTV channel unit for installation into the
UFO®compact module carriers UFG 3xx/4xx To process signals from two DVB-Sat (or HDTV)
transponders into a QAM modulated output signal Enables selection of individual programmes from two
QPSK modulated DVB-S signals (or 8PSK modulated DVB-S(2) signals), multiplexing of both transport streams and transmodulation of these into a QAM modulated output channel The whole channel unit is integrated in one module Two inputs A/B, settable using the central control unit
(e.g. for H/V switching and to build up the cable-NIT for two polarisations) DiSEqCTM1.0 to control external multi-switches All essential transmission parameters can be set using
the central control unit The output level can be set and switched off using the
control unit Adjacent channel compatible Software updates using control unit’s interface
MPEG transport stream processor:
To set a constant output data rate (Stuffing) with PCR correction With programme filter to select individual TV and radio programmes (simple setting using the USW 30 and UFX 31x) For NIT matching (cable NIT; UFX 31x is additionally required) For CAT conversion (insertion of an operator ID)
Source of EPG data can be switched between input A
and input B (from software version V 04) QAM modulator for 16/32/64/128/256 QAM
(factory setting: 64 QAM) FPGA designed MPEG transport stream processor
and QAM modulator with outstanding MER and roll off attenuation values Retrofittable with UFZ 394 Common Interface retro-
fit set for insertion of two CA modules (input A; as of software version V 02) Ambient temperature range for operation in:
- module carrier with extraction fan (UFG 412): -20 to +50 °C - (extension) module carrier without extraction fan (UFG 3xx): -20 to +40 °C Required central controller software version:
at least V 9.30 (CI functionality as of V 9.31) Dimensions (W x H x D) in mm: 265 x 27 x 170 Packing unit/weight (pc./kg): 1/1.0 35
Transmodulator/multiplexer DVB-S(2) - QAM Technical data
Type Order no.
Frequency range (MHz)
Input 950-2,150 ¹)
UFO®compact signal processing system
UFO 373/MX 20610087
Ch
Ch
Output 47-100/ 110-862 ²)
Ch
Input level
Input data rate
Output data rate ³)
(dBµV)
(MS/s)
(MS/s)
55-85
2-45
2.275-7.15
Modulation Max. output Error Rate level MER
Setting range output level
Current drain
(dBµV)
(V/mA)
(dB)
(dBµV) 91
81-91
43
(QAM 256)
(QAM 256)
85
75-85
(QAM 64)
(QAM 64)
5/1,200 12.5/750 31/7
¹) Settable in 1 MHz steps ²) Tuning in an 8 MHz raster, fine tuning in 250 kHz steps ³) Settable (Stuffing)
Block diagram
36
DVB-S(2) - COFDM transmodulator
UFO®compact signal processing system
UFO 331/TP 20610100
Features DVB-S/HDTV channel unit for installation in the
UFO®compact module carriers UFG 3xx/4xx To process the signals of a DVB-S transponder or
a HDTV transponder Transmodulates a QPSK modulated DVB-S or 8PSK
modulated DVB-S2 signal into a COFDM modulated output signal (programme filtering required for adjustment to the max. output data rate) Two inputs A/B, settable using the central control unit
(e.g. for H/V switching) DiSEqCTM1.0 for control of external multi-switches All essential transmission parameters can be set using
the central control unit The output level can be set and switched off using the
control unit Adjacent channel compatible
MPEG transport stream processor:
To set a constant output data rate (Stuffing) with PCR correction With programme filter to remove individual TV and radio programmes (easy setting using the USW 30 and UFX 31x) For NIT matching (cable NIT; UFX 31x is additionally required) For CAT matching, e.g. to set the operator-ID
COFDM modulator for modulation type 2k,
mapping QPSK, 16 QAM, 64 QAM FPGA designed MPEG transport stream processor and
COFDM modulator Software updates through control unit’s interface Retro-fittable with the UFZ 394 Common Interface
retro-fit set to insert two CA modules Required central control unit software version:
at least V 9.32 Ambient temperature range for operation in:
- module carrier with extraction fan (UFG 412): -20 to +50 °C - (extension) module carrier without extraction fan (UFG 3xx): -20 to +40 °C Dimensions (W x H x D) in mm: 265 x 27 x 170 Packing unit/weight (pc./kg): 1/0.85
37
DVB-S(2) - COFDM transmodulator Technical data
Type Order no.
Input 950-2,150 ¹)
UFO 331/TP 20610100
Input level
Input data rate
Output 47-100/ 110-862 ²)
(dBµV)
(MS/s)
Ch
55-85
2-45 (DVB-S) 2-30 (DVB-S2)
Frequency range (MHz)
Ch
COFDM modes
QPSK 16 QAM 64 QAM
Modulation Error Rate MER
Max. output level
Setting range output level
Current drain
(dB)
(dBµV)
(dBµV)
(V/mA)
33.5 (< 400 MHz) 32 (> 400 MHz)
91
81-91
5/500 12.5/750 31/7
Settable in 1 MHz steps ²) Settable in 6/7/8 MHz channel plan, fine tuning in 250 kHz steps
UFO®compact signal processing system
1)
Block diagram
38
DVB-S(2) - COFDM transmodulator/multiplexer
UFO®compact signal processing system
UFO 333/MX 20610110
Features DVB-S/HDTV channel unit for installation in
UFO compact module carriers UFG 3xx/4xx ®
To process signals from two DVB-Sat (or HDTV)
transponders into a COFDM output signal Enables selection of individual programmes from two
QPSK modulated DVB-S (or 8PSK modulated DVBS(2) signals), multiplexing of both transport streams and transmodulation of these into a COFDM-modulated output channel Two inputs A/B, settable using the central control unit
(e.g. for H/V switching and to build up the cable-NIT for two polarisations) DiSEqCTM1.0 to control external multi-switches All essential transmission parameters can be set using
the central control unit The output level can be set and switched off using the
control unit Adjacent channel compatible COFDM modulator for 2k modulation and QPSK,
16 QAM, 64 QAM mapping
MPEG transport stream processor:
To set a constant output data rate (Stuffing) with PCR correction With programme filter to select individual TV and radio programmes (simple setting using the USW 30 and UFX 31x) For NIT matching (cable NIT; UFX 31x is additionally required) For CAT conversion (insertion of an operator ID)
Source of EPG data can be switched between input A
and input B (from software version V 04) FPGA designed MPEG transport stream processor
and COFDM modulator Retro-fittable with UFZ 394 Common Interface retro-
fit set for insertion of two CA modules (input A; as of software version V 02) Software updates through control unit’s interface Required central controller software version:
at least V 9.40 Dimensions (W x H x D) in mm: 265 x 27 x 170 Ambient temperature range for operation in:
- module carrier with extraction fan (UFG 412): -20 to +50 °C - (extension) module carrier without extraction fan (UFG 3xx): -20 to +40 °C Packing unit/weight (pc./kg): 1/1.0 39
DVB-S(2) - COFDM transmodulator/multiplexer Technical data
Type Order no.
Frequency range (MHz) Input 950-2,150 ¹)
UFO 333 MX 20610110
Ch
Ch
Output 47-100/ 110-862 ²)
Ch
Input level
Input data rate
(dBµV)
(MS/s)
55-85
2-45 (DVB-S) 2-30 (DVB-S2)
COFDM Modulation Error Max. output modes Rate MER level
QPSK 16 QAM 64 QAM
Setting range output level
Current drain
(dB)
(dBµV)
(dBµV)
(V/mA)
33.5 (< 400 MHz) 32 (> 400 MHz)
91
81-91
5/1,200 12.5/750 31/7
UFO®compact signal processing system
¹) Settable in 1 MHz steps ²) Settable according to 8 MHz channel plan, fine tuning in 250 kHz steps ³) Settable (Stuffing)
Block diagram
40
Twin DVB-T transmodulator COFDM - QAM
UFO®compact signal processing system
UFO 357/TP 20610085
Features Twin DVB-T transmodulator for installation in
FPGA designed MPEG transport stream processor
and QAM modulator with outstanding MER and roll off attenuation values
UFO®compact module carriers UFG 3xx/4xx Transmodulates two COFDM modulated DVB-T signals
into two QAM modulated output signals
MPEG 2 transport stream processor:
To set a constant output data rate (Stuffing) with PCR correction With programme filter to remove individual TV and radio programmes (easy setting using the USW 30 and UFX 31x) For NIT matching (cable NIT; UFX 31x is additionally required) For CAT matching, e.g. to set the operator-ID
Two individual channel units are integrated in one
module Two inputs (input A for channel unit twin I, input B for
channel unit twin II) All essential transmission parameters can be set using
the central control unit The two output channels are individually settable The two output levels can be commonly set or
individually switched off using the control unit Adjacent channel compatible QAM modulator for 16/32/64/128/256 QAM
(factory setting: 64 QAM)
Software updates through control unit’s interface Ambient temperature range for operation in:
- module carrier with extraction fan (UFG 412): -20 to +50 °C - (extension) module carrier without extraction fan (UFG 3xx): -20 to +40 °C Required central control unit software version:
as of V 9.31 Dimensions (W x H x D) in mm: 265 x 27 x 170 Packing unit/weight (pc./kg): 1/1.0
41
Twin DVB-T transmodulator COFDM - QAM Technical data
Type Order no.
Frequency range (MHz) Input 47-862 ¹)
UFO®compact signal processing system
UFO 357/TP 20610085
Ch
Ch
Output 47-100/110-862 ²)
Ch
Ch
Input level
Modulation COFDM Output data Max. output Setting range Error Rate ) modes rate ³ level output level MER
(dBµV) 45-90 (16 QAM) 55-90 (64 QAM)
(MS/s)
2 k, 8 k
2.275-7.15
Current drain
(dB)
(dBµV)
(dBµV)
(V/mA)
43
91 (QAM 256) 85 (QAM 64)
81-91 (QAM 256) 75-85 (QAM 64)
5/280 12.5/750 31/7
¹) For channel unit twin I and twin II, frequency range input independently settable in 6/7/8 MHz steps, fine tuning in 100 kHz steps ²) Settable in 8 MHz steps; fine tuning in 250 kHz steps ³) Settable (Stuffing) 4) In Band 1 (Ch2; Ch3) the minimal input level is 55 dBµV for 16 QAM and 65 dBµV for 64 QAM
Block diagram
42
TV converters UFO 320 260500
Features TV converters for installation in UFO®compact module
carriers UFG 3xx/4xx
Adjacent channel compatible AGC for automatic input level control
To frequency convert terrestrial TV programmes
(B/G standard)
Required central control unit software version:
at least V 6.40
Input and output channel can be set using the central
control unit
Dimensions (W x H x D) in mm: 265 x 27 x 120 Packing unit/weight (pc./kg): 1/0.5
High degree of selection with IF conversion Any combination other than co-channel combination
is possible
Technical data
Type Order no.
Frequency range (MHz) Input 174-230
UFO 320 260500 UFO 321 260501
Input level
Signal-to-noise Max. output level/ ratio ³) S/N Noise figure ²) setting range ¹) weighted
Current drain
Input 470-862
Output 118-342
(dBµV)
(dB)
(dBµV)
(dB)
(V/mA)
Ch
Ch
55-85
52
95/85-95
8
5/320 12.5/110 31/5
Ch
55-85
55
95/85-95
8
5/320 12.5/110 31/5
Ch
¹) To EN 50083-5/point 3.1, 54 dB IM (DIN 45004 K) ²) At maximum gain ³) With input level > 80 dBµV
43
UFO®compact signal processing system
UFO 321 260501
DVB-T TV converters UFO 351 20610049
UFO®compact signal processing system
UFO 352 20610055
Features TV converters for installation in UFO®compact module
carriers UFG 3xx/4xx
AGC for automatic input level control Required central controller software version:
at least V 7.20
To frequency convert terrestrial DVB-T and analogue
PAL programmes (B/G, D/K or I standard)
Dimensions (W x H x D) in mm: 265 x 27 x 120
Input and output channel can be set using the central
control unit
Packing unit/weight (pc./kg): 1/0.5
High degree of selection with IF conversion Any channel combination possible
(also co-channel conversion)
Note on UFO 352:
Suitable as channel amplifier for DAB
Technical data
When DVB-T signals are converted from UHF to VHF, the 8 MHz bandwidth is retained
(co-channel conversion Ch12-Ch12) Adjacent channel compatible
Type Order no.
Frequency range (MHz)
Input 174-230/ 470-862 UFO 351 20610049
Ch
UFO 352 20610055
Ch
¹) At maximum gain ²) For PAL at input level > 80 dBµV
44
Output 118-342
Ch
Input level
Signal-to-noise Output level ratio ²) setting range S/N weighted
Noise figure ¹)
Current drain
Output 470-862
(dBµV)
(dB)
(dBµV)
(dB)
(V/mA)
Ch
55-85 (PAL) 35-85 (DVB-T)
52
85-95 (PAL) 75-85 (DVB-T)
7
5/500 12.5/180 31/8
55-85 (PAL) 35-85 (DVB-T)
52
85-95 (PAL) 75-85 (DVB-T)
7
5/500 12.5/180 31/8
Twin TV modulator
Features TV sound in stereo, mono or 2-tone; manually or
Twin TV modulator for installation in UFO®compact
automatically switchable through the data line decoder
module carriers UFG 3xx/4xx
Integrated video signal generator (black screen), i.e.
To modulate audio/video signals into standard TV
to transmit radio programmes on the two TV channels (independent switching between external and internal video signal)
signals Two modulators are integrated in one module
Required central controller software version:
AV inputs: SubMin D socket, 15-pin
at least V 6.80
The two output channels are fixed adjacent channels
Dimensions (W x H x D) in mm: 265 x 27 x 170
All essential transmission parameters can be set using
the central control unit
Packing unit/weight (pc./kg): 1/0.6
Both output levels can be commonly set and individually
switched off using the control unit
Note: An adaptor cable SubMin D to Cinch, order no. 09901498, can be ordered from ESC Grassau
Adjacent channel compatible TV standard: B/G, D/K or I, settable using the central
Technical data
control unit
Type Order no.
Input audio UFM 340 20610047
Input voltage audio
Frequency range (MHz)
Input video
Output 110-862
L
R
V
Ch
L
R
V
Ch
Video/audio Signal-toInput volcarrier level noise ratio ¹) tage video spacing S/N weighted T1/T2
Max. output level/setting range
Current drain
(Veff)
(Vss)
(dB)
(dB)
(dBµV)
(V/mA)
1
1
60
18/22
95/85-95
5/560 12.5/250 31/6
¹) Channel unit’s intrinsic value
45
UFO®compact signal processing system
UFM 340 20610047
TV modulator
UFO®compact signal processing system
UFM 341 20610069
Features TV sound in stereo, mono or 2-tone; manually or
TV modulator for insertion into the UFO®compact
automatically switchable through the data line decoder
module carriers UFG 3xx/4xx
TV standard: B/G, D/K or I, settable using the central
Modulates an audio/video signal into a standard
control unit
TV signal
Required central controller software version:
Designed for larger networks with higher system
at least V 8.40
requirements AV input: SubMin D socket, 15-pin
Dimensions (W x H x D) in mm: 265 x 27 x 170
All essential transmission parameters can be set using
Packing unit/weight (pc./kg): 1/0.6
the central control unit The output level can be set and switched off using the
Note: An adaptor cable SubMin D to Cinch, order no. 09901498, can be ordered from ESC Grassau
control unit Adjacent channel compatible
Technical data
Type Order no. Input audio UFM 341 20610069
Input vol- Input voltage tage audio video
Frequency range (MHz)
L
R
Max. output level/setting range
Current drain
Input video
Output 1) 47-68/110-862
(Veff)
(Vss)
(dB)
(dB)
(dBµV)
(V/mA)
V
Ch
1
1
61
16/20
95/85-95
5/390 12.5/220 31/5
¹) Settable in the 7/8 MHz channel plan, fine tuning in 250 kHz steps ²) Channel unit’s intrinsic value
46
Video/ Signal-to-noise audio carrier ratio ²) S/N level spacing weighted T1/T2
19” cabinet
Note: The ambient temperature limits for the UFG 3xx UFO®compact (extension) module carriers must be considered should they be used! Additional cooling may be necessary.
TUG 100 with ESO 06 and ZSO 210
Features Cabinet for 19” rack installation Construction: 41 RU (equivalent to 2 m)
Width: 60 cm, depth: 60 cm
Dimensions (mm):
600 x 2,000 x 600 without glass door 600 x 2,000 x 670 with glass door Packing unit/weight (pc./kg): 1/31 net
Accessories for the 19” cabinet
ZSO 74 276249 ZSO 200 24310004
ZSO 74
ZSO 200
ZSO 74:
ZSO 200:
Front panel (1 RU)
Universal rail set for the TUG 100
For cable passage and ventilation
To mount any 19” racking (not necessary for module
Packing unit/weight (pc./kg): 1/0.2
carriers and TGZ 1x module rack) Packing unit/weight (pc./kg): 1/1.4
47
UFO®compact signal processing system
TUG 100 24310003
Accessories for the 19” cabinet ESO 06 24310005
UFO®compact signal processing system
ZSO 210 24310007
ESO 06:
ZSO 210:
Two side and rear panels for the TUG 100
Glass door for TUG 100
Packing unit/weight (pc./kg): 1/37 net
Packing unit/weight (pc./kg): 1/19.7 net
19” accessory mounting rack TGZ 10 236430 TGZ 15 24310006
TGZ 15 fitted
TGZ 10:
TGZ 15:
To mount other headend components into TUG 100
To mount EAX 24/26/28 and EBC 06/08 as splitters
Dimensions (mm): 483 x 267 x 198 (19”, 6 RU) Packing unit/weight (pc./kg): 1/3.3
and couplers (e.g. in optical transmission and reception headends) Dimensions (W X H X D) in mm: 483 x 221 x 190
(19”, 5 RU) Packing unit/weight (pc./kg): 1/2.9
48
LCN function Kathrein UFO®compact processing system also allows the use of the LCN (logical channel numbering) function.
New: LCN
The function has been included in all currently available transmodulators. Using this function cable network operators can also transmit programme list information as an LCN infomation as part of the NIT (network information table). After carrying out an LCN scan on an LCN capable receiver, the subscriber will have all COFDM or QAM modulated programmes distributed in the network saved on the DVB-T or DVB-C receiver in a pre-sorted sequence, as determined by the cable operator. Tedious programme sorting on the receiver is therefore not necessary anymore. The LCN function is available on both QAM and COFDM transmodulators, allowing use in both digital DVB-C and DVB-T cable networks. The LCN function will especially minimise service costs in networks serving hospitals and hotels and like organisations, which are already taking advantage of DVB-T and DVB-C distribution and often utilise flat-screen TVs with integrated digital receivers. To be able to cater for as many network subscribers as possible, Kathrein has based the LCN generation based on the Nordig Specification, Logical Channel Descriptor, Version 1. The LCN function will be integrated in Kathrein’s DVB-C set-top boxes UFC 960sw and UFC 662sw with the next software update.
UFO®compact signal processing system
The DVB-T receivers UFT 675sw and UFT 676sw are already LCN compatible. All future Kathrein DVB-C and DVB-T receivers will also be LCN compatible. The LCN function can be included in already installed UFO®compact system modules with a simple software update.
The new function is available for the following UFO®compact modules: Transmodulators DVB-S(2) – DVB-C:
UFO 371/TP, UFO 372/TP, UFO 373/MX (Version V 05 in all modules) Transmodulators DVB-S(2) – DVB-T:
UFO 331/TP, UFO 333/MX (each version V 02) Transmodulator DVB-T – DVB-C:
UFO 357/TP (Version V 02)
The latest software versions are available for downloading (free of charge) on Kathrein’s home page “http://www.kathrein.de” found under “Service - Software and Downloads”. One must use the de-multiplexer UFX 314 (or UFX 312) loaded with the software version V 05 and the UFO®compact configuration software USW 30 to programme the LCN information in the headend. The USW 30 UFO®compact configuration software must also be updated to the current stand version 3.6.
49
Technical appendix The data given are typical values, valid for transponder bandwidths of 27 MHz, e.g. for ASTRA 1 and for EUTELSAT/HOTBIRD.
UFO®compact signal processing system
Antenna Feed system
Band
G/T (dB/K)
C/N Hamburg
C/N Munich
C/N Paris
C/N London
C/N Madrid
C/N Milan
The values are based on an over-site EIRP power of 52 dBW, which may be 3 dB lower for EUTELSAT/HOTBIRD.
CAS 09/90 UAS 584
Low-band High-band
18.8 19.8
18.3
18.7
18.5
18.3
18.8
18.8
CAS 120/124 UAS 584
Low-band High-band
22.0 23.0
21.5
21.9
21.7
21.5
22.0
22.0
CAS 120/124 EAS 484
Low-band High-band
20.6 21.6
20.0
20.5
20.2
20.2
20.2
20.2
CAS 180 EAS 484
Low-band High-band
23.8 24.8
23.3
23.7
23.4
23.4
23.4
23.4
C/N on output feed system
*) ASTRA 1 and EUTELSAT reception Due to the high transmission power, when using an antenna > 1.2 m in diameter the LNB could be overloaded (intermodulation products would then reduce the C/N) We recommend using the professional quatro feed system EAS 484 with antennas > 1.2 m in diameter.
Note: EN 50083-7 specifies minimal C/N requirements for headends (not including system reserves): 15 dB for analogue signal processing 12 dB for digital signal processing
No. of programmes
1
8
Type
24
48
96
S/N on output (dB)
UFM 340
60.0
57.5
55.4
53.4
51.0
UFM 341
61.0
58.2
58.1
58.0
58.0
UFO 391
61.0
58.2
58.1
58.0
58.0
UFO 393
60.0
57.5
55.4
53.4
51.0
UFO 394
60.0
57.6
57.5
57.5
57.5
UFO 395
60.0
57.5
55.4
53.4
51.0
Notes: If different analogue (PAL) modules are combined together in a system, then the lowest given S/N ratio in the above table for any one of the modules in this combination will apply as the overall valid S/N ratio. (e.g. 8 x UFM 340 and 8 x UFO 391 → the value given for the UFM 340 for 24 channels will be valid) The output signal and noise levels of QPSK-QAM and COFDM-QAM transmodulators are 10 dB (with 64 QAM) or 4 dB (with 256 QAM) lower than the signal levels of analogue signals, and therefore only insignificantly influence the signal to noise ratio of the analogue signals
50
S/N on output PAL modules
Technical appendix Module carrier UFG 412 with wall mounting set UFZ 412 and installed output amplifier Output amplifier system data
Output coupling
Output level (dBμV)
C/N (dB)
S/N (dB)
IM 2 (dB)
IM 3*) (dB)
98
66
67.5
60
60
12 modules *) 24 channel load
Passive coupling of carriers (without installed launch amplifier) with external launch amplifier VOS 137/RA
Standard coupling method for UFO®compact module carrier UFG 412
*)
No. of modules
Max. possible output level (dBμV)
EBC 02
2 x 12
110 (106) *)
EBC 03
3 x 12
108 (104) *)
EBC 04
4 x 12
107 (103) *)
UFO 394
3.3 VOS 137/RA system data
Signal to noise and disturbance ratios in relation to output levels Select the appropriate output level for a given disturbance ratio (CTB/CSO) Interpolate to receive intermediate values for other output levels Output level (dBμV)
Signal-to-noise ratio C/N (dB) S/N (dB)
Disturbance ratio *) CTB (dB) CSO (dB)
110
70
71.5
60
63
108
68
69.5
64
65
106
66
67.5
68
67
104
64
65.5
72
69
102
63
64.5
76
71
100
63
64.5
80
73
98
62
63.5
84
75
*) According to DIN EN 50083-3, CENELEC channel plan 862 MHz C/N = output level - gain - noise figure - 2 dBμV (RF noise ratio) S/N = C/N + 1.5 dB (video noise ratio, weighted)
Assumptions: UFO®compact system 19” with 48 PAL programmes (UFO 393), QAM transponders and external VOS 137/RA Selected output level: 100 dBμV
Output level (dBμV)
C/N (dB)
S/N *) (dB)
CTB (dB)
Headend system data
CSO (dB)
Output UFG 412
77
-
53.4
-
-
Output VOS 137/RA
100
63
64.5
80
73
Total
100
-
53.1
80
73
*) The sum total S/N is calculated with a power addition of the two S/N values
51
UFO®compact signal processing system
UFG 412 Coupling with
IPTVcompact system
The Kathrein IPTVcompact system – modular - versatile - future secure
UFO®compact signal processing system
Modern interactive media have generally only been offered by larger telecommunication companies due to the high technical requirements involved. The Kathrein IPTVcompact system now offers the broad range of possibilities offered by such systems to subscribers connected to smaller, local distribution nets, including high-definition services. The extremely compact design coupled with automatic configuring of both server and software modules makes system installation very simple indeed. Ready-to-deploy systems can be easily commissioned - long and involved system planning and commissioning is no longer necessary. The system has been designed so that local operational activity can be kept to a minimum with no highly specialised service team needed on-site 24/7. The remote servicing over internet capability allows one to pass any support functions on to an external service support company. Kathrein’s IPTVcompact system can offer a suitable solution wherever the efficient distribution of TV, video and audio contents is required. The IPTVcompact system offers a simple and efficient possibility to transmit up to 80 TV and radio programmes over an IP-enabled network such as DSL via telephone cable, DOCSIS over coaxial cable, optical fibre or just over Ethernet LANs. Alternatively one can offer local signal feeds via an IP network to a remote headend, where IP streams are reconverted into standard RF signals (analogue PAL, FM, DVB-C/T). The innovative front-end server concept allows practically instantaneous channel change in unicast mode - as known from analogue TV. In contrast to services from first-generation IPTV systems, this ensures a greater user acceptance.
Modular IPTV headend for hotels, public buildings, business TV, campus and hospitality applications Easy-to-use, efficient means to transmit up to 80 individual TV programmes and an almost unlimited number of radio
programmes Processing of MPEG-2 MPTS: SDTV or HDTV, MPEG-2 or MPEG-4 AVC (H.264) encoded To deliver live TV & radio, time-shifted TV, video-on-demand, network video recorder and interactive services to TV sets
via IP set-top boxes or PCs using the Desktop Media Client DMC Very fast channel zapping through use of Unicast, providing highest user ergonomy Suitable for structured cabling (CAT 5/6/7), providing glass fibre networks (Fttx), coaxial cable (DOCSIS) and
VDSL access networks 52
IPTVcompact system IPTV receivers
All-in-one solution: Kathrein’s IPTV receivers Kathrein offers an array of pre-configured receivers which allow users to almost instantaneously access programmes, interactive and video-on-demand services. All units are HD-compatible. Video-on-demand and timeshift TV can be viewed without use of a local hard disk. This provides one with unparalleled long-term feasibility ensuring that the end user need not purchase a new device whenever new services are available.
IPTV set-top box UFI 511
You will find the latest information on Kathrein’s IPTVcompact system and set-top boxes in system-specific brochures which can be ordered on-line or downloaded from “www.kathrein.de”.
Modern with th TV Distributio e IPTVc n ompact Technology System
UFO®compact signal processing system
DVB-S/DVB-S2 receiver TVD 200
Special brochures
With Desk NEW: top Med for PCs ia Client
UFI 511
sw
26210440 Black -
0 x 576 lines), p, 1080 i G-4 (H.26 4)
IPTV Set-To p
Boxes
3, Dolb y Digita l
IPTV End-user Units
Kathrein DVB to IP Streamer: TVD 200, 2 x DVB-S/S2 Tuners for SD & HDTV Reception in 1 x RU
A complete solution from Kathrein: KATHREIN’s IPTV STBs
te
In order to provide a local IP network with live programmes from a satellite using the Kathrein IPTV compact, the satellite signals must be converted to IP. This function is carried out with the Kathrein TVD 200. 00. The unit is designed with two DVB-S/DVB-S2 input tuners allowing it to receive both HDTV or SDTV signals and to stream these through an IP network. Coded signals can be decoded through the DVB Common Interface interface (DVB-CI) with corre-
Kathrein offers a selection of ready-to-use integrated end-user units with which the user can quickly and intuitively handle programmes, inter-active contents and call-up services. All end-user unts are HD-capable. Even without a local hard disk selected videos
TVD 200 sponding Conditional Access Modules (CAM). In order to decode several programmes simultaneously two DVB CI slots are available for each input. The decoded transport streams are then available either over ASI or Gigabit Ethernet (GE) interfaces.
to mod
ification!
Local setting is carried out quite simply using a tuning switch and an LC display. An integrated web server eiter_E_cs allows one to12-S carry out2.ind thed configuration using a stan1 dard web browser over an LAN network e.g. to set a change of transponder. An SNMP agent is implemented to allow monitoring over a network management system (NMS).
Subject 0/JH/Pf 87/1/041
HDTV-capable IPTV Set-top-box UFI 510 /
iÊ1Êx£äÃÜÊÃÊ`iÃ}i`ÊÜÌ
Ê>ÊÃÌÀi>}ÊV>«>LiÊ Ì
iÀiÌÊÌiÀv>ViÊ,Ê{x®Ê>`ÊÃÊwÌÌi`ÊÜÌ
Ê>Ê*/6ÊViÌÊ } software which allows it to receive IPTV programmes from the Kathrein IPTV or IPTV compact systems. These support Fast Channel Zapping and call-up services (VoD), assymetrical TV viewing and network video-recorder functions. The UFI 510 can decode both * ÊÓÊ>`ÊÊ* Ê{Ê6 Ê°ÓÈ{®ÊÃ}>ÃÊÊ>Ê
}
Ê`i}ÀiiÊvÊvÕÌÕÀiÊ security. Interacti ve IPT V Platfo rm HDTV-capable IPTV Hybrid Set-top-box UFC 960 for CATV and IPTV This hybrid multi-functional IP set-top-box is designed with two independant reception and signal processing 30.04.2010 «>Ì
Ã\ÊiÊÃÌÀi>}V>«>LiÊ*ÊÌiÀv>ViÊ,Ê{x®ÊvÀÊ`>Ì>Ê>`Ê*/6Ê 12:52:50 signals and a DVB-C tuner for the reception of digitally-modulated TV and Radio signals from a CATV net. Otherwise, the UFC 960 offers all the capabilities of the UFI 510 being also loaded with the same IPTV client software. So, working with a Kathrein IPTV compact p system call-up services, inter-active offers and assymetrical TV viewing are all possible.
GE G E GE
IPNet Desktop Media Client DMC The DMC brings you the handling ease of a TV, such as channel selection and an electronic programme guide to your PC. Ideal for TV usage in companies, newspaper editor departments, universities and anywhere where one can connect to an IT net and where contents need to be transported and made available to any desk-top.
GE E Further video & audio sources (DVB-T, FM, local analogue, RTP camera)
Antenn
en · Elec
Other sources can also be fed into the Kathrein IPTV compact system apart from the TVD 200 - via DVB-T or DVB-S streamers or also directly fed in IP transport streams (MPTS or SPTS). To feed in (local) analogue ÃÕÀViÃÊ>Ê* ÊÓÊÀÊ°ÓÈ{Ê6 ÊiV`iÀÊÃÊ>ÃÊ required.
tronic
27.04.2010
17:03:13
6
and ‘catch-up TV’ can be made available. These functions enable you to ensure an ongoing future secure and modern system, with no expensive exchange of STBs required when any content extensions are offered.
For the distribution network primarily ‘structured cabling’ with CAT5/6/7 is usual. Other cabling types can also be used e.g. optical fibre nets (FttH), or legacy leads such as twisted pairs (with VDSL) or coaxial cable (with EuroDOCSIS). Main screen menu
Fast TV Zapping
VoD film selection
nPVR booking screen
Klein, kompakt, leicht zu verstecken und trotzdem optimaler HDTV-Empfang
7
Receiv
er Prog
The special “Receiver Programme” brochure offers detailed information on Kathrein’s receivers and receiver accessories. The brochure can be ordered on-line or downloaded from “www.kathrein.de”.
ramme
2010
UFS 922
998115 10/
2/0610
/JH/PF
- Subject
to mo dificatio n!
Hard copies of all brochures listed on this page can also be ordered from your representative.
Antenn
en · El
ectroni
c
53
Notes
54
Addresses in Germany
Head Office 83022 83004
Rosenheim
KATHREIN-Werke KG
Anton-Kathrein-Str. 1-3 P.O. Box 10 04 44
Tel: ++49 8031 184-0 Fax: ++49 8031 184-306 E-mail: Business unit SAT -
[email protected] Business unit HFC -
[email protected] Internet: www.kathrein.de
Service centre in Germany
83224
Grassau
ESC Elektronik Service Chiemgau GmbH
Bahnhofstraße 108
Hotline: Tel. ++ 49 86 41 95 45-0 Fax ++ 49 86 41 95 45-35 / 95 45-36 E-Mail:
[email protected] Internet: http://www.esc-kathrein.de
83022
Rosenheim
KATHREIN-Werke KG
Anton-Kathrein-Str. 1-3 P.O. Box 10 04 44
Your contact:
Internet: www.kathrein.de • E-mail:
[email protected] KATHREIN-Werke KG • Phone +49(0) 80 31 1 84-0 • Fax +49(0) 80 31 1 84-3 06 Anton-Kathrein-Straße 1 - 3 • P.O. Box 100 444 • D-83004 Rosenheim/GERMANY
Hotline: Tel. ++49 80 31 184-700 Fax: ++ 49 80 31 184-676 E-mail:
[email protected]
99811590/2/0111/ZWF/PF - Technical data subject to change.
Technical support service