Fixed Table Drills Drilling/Milling Machines Drill Batteries Special Constructions
Your drilling and tapping specialist because of:
2
TRADITION The grey of steel and the green of our valleys. Tenacity, hard work and ambition. From the Basque Country, the heart of the Spanish machine-tool industry, with over 50 years devoted to precision engineering and 40 to the manufacturing of drills, IBARMIA has a level of “know-how” which is widely recognised within the sector. INTERNATIONALISATION Open to the world. The competitiveness of our products and our international recognition explain why three in every four of our machines are for export. Their destinies are industrially developed countries such as Germany, France, Switzerland, Italy, Belgium, USA, Canada, Denmark, etc., with machines installed in the five continents and in the world’s leading industries. LEADERSHIP The fact that we are the preference and reference in many national and international industries and tenders is the outcome of having fully satisfied the expectations and demands of the users of our machines.
RESEARCH AND DEVELOPMENT Reflected in the constant capacity for innovation and adaptation in our product range to the uses and needs of the market. TECHNOLOGY Evolution with time and a total command of the latest technology. That’s why we have our own division for the manufacturing of the latest generation of high-performance vertical Machining centres. DESIGN Thinking of the person at all times, in terms of the efficiency, safety and comfort of the operator. We see design as a strategic competitive tool and apply creative engineering and the most modern computer design techniques in the service of rationalisation, ergonomics and ease of use. Our efforts have been acknowledged by The National Award for Design (BIEMH’96).
QUALITY As objective and means. The axis of all our activity, the basis for our prestige and leadership in the market. PROGRAMME(*) Round and brilliant as the columns of the machines themselves. Solid and robust as their structure (columns). Clear and concrete. Ample, sufficient and adjusted to every need ... and budget. All in one comprehensive catalogue to leave no room for doubt. No confusion, no wasting of your valuable time. We, the specialists, have already done a great deal of your thinking for you.
(*) Some models may not be available in all markets. Please check with your dealer.
3
KEYS: To save time and understand our programme quickly. While the number expresses the direct drilling capacity in steel, the letters stand for:
K: Belt transmission
• S: “small”, or bench version • M: “medium”, or bench drill with intermediate worktable • L: “large”, or pillar version
EK: Belt transmission
• S: “small”, or bench version • M: “medium”, or bench drill with intermediate worktable • L: “large”, or pillar version
T: Geared transmission
• S: “small”, or bench version • M: “medium”, or bench drill with intermediate worktable • L: “large”, or pillar version
Z: Belt transmission
• • • •
S: manual feed A: automatic feed by mechanical clutch B: automatic feed by electromagnetic clutch V: mechanical speed variator
X: Geared transmission
• S: manual feed • A: automatic feed by mechanical clutch • B: automatic feed by electromagnetic clutch
A: Geared transmission with automatic feed by mechanical clutch B: Geared transmission with automatic feed by electromagnetic clutch
C: Mixed transmission belt/geared
• B: automatic feed by electromagnetic clutch • V: mechanical speed variator • VE: electronic speed variator
P: Geared transmission (prismatic column drills)
• B: automatic feed by electromagnetic clutch
F: Geared transmission (prismatic column drilling/milling machines)
4
• B: automatic feed by electromagnetic clutch
K
Series
Pages 6-7
Round column drills Belt transmission Drilling capacity in steel up to Ø 18/25 mm
EK
Pages 8-9
Series
Round column drills Belt transmission Drilling capacity in steel up to Ø 18/25 mm
T
Series
Pages 10-11
Round column drills Geared transmission Drilling capacity in steel up to Ø 25 mm
Z
Series
Pages 12-15
Round column drills Belt transmission Drilling capacity in steel up to Ø 32/34/40 mm
X
Series
Pages16-19
Round column drills Geared transmission Drilling capacity in steel up to Ø 32/34/40 mm
A
Series
Pages 20-21
Round column drills Geared transmission Drilling capacity in steel up to Ø 40/50 mm
B
Series
Pages 22-23
Round column drills Geared transmission Drilling capacity in steel up to Ø 40/50/60/70 mm
C
Series
Pages 24-25
Round column drills Mixed transmission belt/geared Drilling capacity in steel up to Ø 40/50 mm
P
Series
Pages 26-27
Prismatic column drills Geared transmission Drilling capacity in steel up to Ø 50/70 mm
F
Series
Pages 28-29
Prismatic column drilling/milling machines Geared transmission Drilling capacity in steel up to Ø 35 mm Drilling capacity in steel up to 45 cm3/min
Batteries K-EK-T-Z-X-A-B-C
Round column drill batteries
Batteries P
Prismatic column drill batteries
Pages 30-31
Pages 32-33
Special
Special constructions of round column Special constructions of prismatic column
Equipment
General equipment Extra equipment Accessories
Dimensions
Round column drills Prismatic column drills
Pages 34-35
Pages 36-41
Pages 42-49
5
K Series, your choice for: Multi-purpose use • Unequalled robustness • Complete equipment • Speed range Easy to run • Low maintenance • Attractive design • Value for money
Motor integrated in headstock
Speed range chart
Thermomagnetic switch
Security microswitch cover
Belt rapid tight/ untight system by means of a lever
High quality stepped pulleys in aluminium cast iron
Automatic tool ejector
Spindle reversing switch
Front opening cover
Drill guard with vertical adjustment and turn stop in case of opening
High-low speed range selector
Depth scale and adjustable depth stop
Emergency stop
Solid toolholder shaft
Machine use orientation chart
Machine model and serial number plate
Solid steel column Solid feed with rectified surface control triple gripped
Characteristics KS-18 KM-18 KL-18 KS-25 KM-25 KL-25 Maximum drilling capacity in steel St. 60 ø mm 18 25 Maximum drilling capacity in cast iron 200 Brinell ø mm 25 30 Maximum tapping capacity in steel St. 60 mm M 14 M 18 Maximum tapping capacity in cast iron 200 Brinell mm M 18 M 22 Morse Taper MT Nr. 3 3 Maximum spindle stroke (drilling depth) mm 120 120 Main motor power HP(Kw) 0,55 / 0,75 (0,40 / 0,55) 0 ,75 / 1,1 (0,55 / 0,80) Transmission Belt drive Number of speeds 10 Speed range with motor at 750/1500 rpm 50 Hz 3Ph. rpm Upon request: 200-360-400-650-720-1170-1300-2000-2340-4000 Motor at 900/1800 rpm 60 Hz 3Ph. (240-4800 rpm) Feed Manual Worktable dimensions (LxW) mm 270x270 300x270 270x270 300x270 Column diameter mm 100 Distance from spindle centre to column face mm 250 Net weight Kg 125 150 175 125 150 175 Gross weight with packing Kg 150 170 215 150 170 215 m 0,8x0,5x1,4 2,1x0,5x0,9 0,8x0,5x1,4 2,1x0,5x0,9 Packing dimensions (length x width x height)
Standard equipment
Optional equipment (*)
Depth scale and adjustable depth stop High/low speed range selector PKA Floor cabinet with 2 shelves Automatic tool ejector Drill guard with microswitch PKB Floor cabinet with door and drawer Thermomagnetic switch Security microswitch on cover MG Rotating table plate (Only for “KM” & “KL” models) Emergency STOP “CE” mark MFM Reversible tiltable with vice (only for “KL”models) Spindle reversing switch MCC Co-ordinate table over support (only for “KL”models) ERC Coolant system (independent container)
6
(*) On display on pages 36-41
K
Series ø18 mm ø25 mm
With rotating table plate (MG).
With reversible tiltable with vice (MFM).
KS-18
M 14 M 18
0,4/0,5 Kw 0,5/0,8 Kw
With co-ordinate cross table (MCC).
MT 3 MT 3
120 mm ø100 mm 250 mm 120 mm ø100 mm 250 mm
With floor cabinet with 2 shelves (PKA).
KM-25
With floor cabinet with door and drawer (PKB).
KL-25
7
EK Series, your decision for: Multi-purpose use • Unequalled robustness • Complete equipment • Speed range Easy to run • Low maintenance • Attractive design • Value for money Thermomagnetic switch
Spindle reversing switch
Depth scale and adjustable depth stop
Worklight switch
Belt rapid tight / untight system by means of a lever
Solid feed control triple gripped
Coolant switch Emergency stop
Fine manual feed control
Drill guard with vertical adjustment and turn stop in case of opening
Characteristics Maximum drilling capacity in steel St. 50/60 ø mm mm Maximum tapping capacity in steel St. 50/60 Nr. Morse Taper MT mm Maximum spindle stroke (drilling depth) HP(Kw) Main motor power Transmission Number of speeds Speed range with motor at 750/1500 rpm 50 Hz 3Ph. rpm Upon request: Motor at 900/1800 rpm 60 Hz 3Ph. Feed
EKS-18
EKM-18
EKL-18
EKS-25
EKM-25
EKL-25
18
18 M14
18
25
25 M18
25
3 120 0,68 - 1,4 (0,51 - 1,05)
0,95 - 1,8 (0,71 - 1,35) Belt 10 245 - 4100 295 - 4800
270 x 270
270 x 300
Manual 270 x 300 270 x 270
270 x 300
270 x 300
Worktable dimensions (LxW)
mm
Column diameter Distance from spindle centre to column face Net weight Gross weight with packing Packing dimensions (length x width x height)
Ø 100 mm 250 mm 190 230 250 190 230 260 Kg 200 250 315 200 250 325 Kg m 1,36x0,57x0,7 1,84x0,57x0,7 2,10x0,57x0,8 1,36x0,57x0,7 1,84x0,57x0,7 2,10x0,57x0,8
Standard equipment Adjustable depth stop Worklight Automatic tool ejector Security microswitch cover Thermomagnetic switch Emergency STOP
8
Optional equipment (*) Spindle reversing switch Low voltage electrical equipment Drill guard with microswitch “CE” mark
PKB Floor cabinet with door and drawer RS Automatic feed reversing system for tapping VE Variable speed by electronic variator VE + TAK Continuous speed by electronic variator with automatic turn reversing system for tapping and digital rpm counter LBC Depth scale digital read-out system MB1 Co-ordinate table X=220 / Y=140 mm MB2 Co-ordinate table X=280 / Y=180 mm HGP Master guide spindle and nut set
HGP-S Master guide spindle and nut set with special thread (inches, etc) ERB Coolant system in base V Hand wheel for fine feed work MB Security bimanual command HDB Hidroblock automatic feed system MG Rotating table plate (only for EKM y EKL models) MFM Reversible tiltable with vice (only for EKL model) MCC Co-ordinate table over support (only for EKL model) (*) On display on pages 36-41
ø18 mm ø25 mm
M 14 0,68/1,4 Kw MT 3 M 18 0,95/1,05 Kw MT 3
120 mm ø100 mm 120 mm ø100 mm
250 mm 250 mm
EK
EKS-25 With co-ordinate table
EKS-18 With hidroblock
EKS-18 With lead screw system
9
T Series, your choice for: State of the art technology • Geared machine head • Complete equipment Speed range • Easy to run • Zero maintenance Thermomagnetic switch
High-low speed range selector
Speed selector by means of two controls
Spindle reversing switch
Depth scale and adjustable depth stop
Drill guard with vertical adjustment and turn stop in case of opening
Characteristics
TS-25
Maximum drilling capacity in steel St. 60 ø mm ø mm Maximum drilling capacity in cast iron 200 Brinell mm Maximum tapping capacity in steel St. 60 mm Maximum tapping capacity in cast iron 200 Brinell Nr. Morse Taper MT mm Maximum spindle stroke (drilling depth) HP(Kw) Main motor power Transmission Number of speeds rpm Speed range with motor at 1500/3000 rpm 50 Hz 3Ph. Upon request: Motor at 1800/3600 rpm 60 Hz 3Ph. (90-3360 rpm) Feed Worktable dimensions (LxW) mm mm Column diameter Distance from spindle centre to column face
mm
Net weight Gross weight with packing Packing dimensions (length x width x height)
Kg Kg m
Standard equipment Adjustable depth stop Worklight Automatic tool ejector Security microswitch cover Thermomagnetic switch Emergency STOP
10
Emergency stop
Machine model and serial number plate
Solid toolholder shaft
Solid steel column Solid feed control with rectified surface triple gripped
TM-25
TL-25
25 30 M 18 M 22 3 120 1,1/1,6 (0,82/1,2) Gear box 8 65-3060 78-3672 Manual 270x270
300x270 100 250
200 210 1,45x0,6x0,8
240 260 2,14x0,6x0,8
250 310 2,14x0,6x0,8
Optional equipment (*) Spindle reversing switch Low voltage electrical equipment Drill guard with microswitch “CE” mark
PKB Floor cabinet with door and drawer RS Automatic feed reversing system for tapping VE Variable speed by electronic variator VE + TAK Continuous speed by electronic variator with automatic Turn reversing system for tapping and digital rpm counter LBC Depth scale digital read-out system MB1 Co-ordinate table X=220 / Y=140 mm MB2 Co-ordinate table X=280 / Y=180 mm HGP Master guide spindle and nut set
HGP-S Master guide spindle and nut set with special thread ERB Coolant system in base V Hand wheel for fine feed work MB Security bimanual command HDB Hidroblock automatic feed system MG Rotating table plate (only for TM and TL models) MFM Reversible tiltable with vice (only for TL model) MCC Co-ordinate table over support (only for TL model) (*) On display on pages 36-41
Series ø25 mm
With rotating table plate (MG).
With reversible tiltable with vice (MFM).
TS-25
M 18 0,82/1,2 Kw MT 3
120 mm ø100 mm
With co-ordinate cross With floor cabinet with table (MCC). 2 shelves (PKA).
TM-25
250 mm
T
With floor cabinet with door and drawer (PKB).
TL-25
11
Z Series, your decision for: The silence of their belts • Speed variator • Suitable size and capacity Easy to run • Low maintenance • Attractive price
High quality stepped pulleys in aluminium cast iron
Lever for lifting the pulley cover and belt rapid tight/untight system
Coolant hose with tap
Thermomagnetic switch
Automatic tool ejector
Spindle reversing switch
Drill guard with vertical adjustment and turn stop in case of opening
Emergency stop Depth scale and adjustable depth stop
Solid feed control triple gripped
Speed variator lever by means of conic pulleys
Automatic feed turning selector
Speed Worklight variator lever and plate for continuous speed range adjustment
Mechanical clutch
Solid toolholder shaft Solid steel column with rectified surface
Worklight switch
Coolant switch
Machine model and serial number plate
High-low speed range selector
Characteristics SZ-32 AZ-32V Maximum drilling capacity in steel St. 60 ø mm 32 Maximum drilling capacity in cast iron 200 Brinell ø mm 35 Maximum tapping capacity in steel St. 60 mm M 22 Maximum tapping capacity in cast iron 200 Brinell mm M 30 Morse Taper MT Nr. 3 Maximum spindle stroke (drilling depth) mm 150 Main motor power HP(Kw) 1,20 / 1,80 (0,9 / 1,3) Coolant pump motor power HP(Kw) 0,10 (0,07) Transmission Belt drive Belt drive Number of speeds 10 Continuous Speed range with motor at 750/1500 rpm 50 Hz Tri. rpm 145-220-290-345 Upon request: 80-1170 440-540-690-860-1080-1720 Motor at 900/1800 rpm 60 Hz Tri. Feed Manual Automatic Nr. of automatic feeds - 2 mm/rev - 0,1-0,2 Automatic feed range Worktable dimensions (LxW) mm 400x420 Column diameter mm 125 Distance from spindle centre to column face mm 300 Net weight Kg 260 290 Gross weight with packing Kg 310 340 m 2,3x0,6x1,1 Packing dimensions (length x width x height) Standard equipment Optional equipment (*) Depth scale and adjustable depth stop Machined base with coolant tank MGI Rotating table plate and tilting support Automatic tool ejector and pump MGM Reversible tilttable with vice Thermomagnetic switch Worklight MCC Co-ordinate table over support Emergency STOP Drill guard with microswitch Spindle reversing switch “CE” mark High/low speed range selector
12
RS Automatic feed reversing system for tapping HB Hydro-pneumatic power feed unit TAK Digital rpm counter (only for “V” models) (*) On display on pages 36-41
Series ø32 mm
M 22
0,9/1,3 Kw
MT 3
150 mm ø125 mm 300 mm
Z
With rotating table plate and tilting support (MGI).
With reversible tiltable with vice (MGM).
AZ-32V With co-ordinate cross table (MCC).
13
Z Series, your decision for: Innovative design • Smooth & Silent • Electronic speed variator • Digital rpm counter Automatic feed reversing for tapping • Easy to run • Low maintenance Thermomagnetic switch
Automatic feed turning selector Automatic tool ejector
Coolant hose with tap
Worklight
Digital rpm counter
Emergency stop
Drill/tap cycle selector
Depth scale and adjustable depth stop
Worklight switch
Drill guard with vertical adjustment and turn stop in case of opening
Solid feed control triple gripped Rpm adjustment control
Mechanical clutch
Machine model and serial number plate
Coolant switch
Turn stop push-button
Solid toolholder shaft
Manual reversing push-button
Solid steel column with rectified surface
Turn start push-button
Characteristics SZ-34 AZ-34 BZ-34 SZ-40 AZ-40 BZ-40 Maximum drilling capacity in steel St. 60 ø mm 34 40 Maximum drilling capacity in cast iron 200 Brinell ø mm 40 45 Maximum tapping capacity in steel St. 60 mm M 27 M 33 Maximum tapping capacity in cast iron 200 Brinell mm M 33 M 39 Morse Taper MT Nr. 4 4 Maximum spindle stroke (drilling depth) mm 150 180 Main motor power HP(Kw) 4 (3) 5,5 (4,12) Coolant pump motor power HP(Kw) 0,10 (0,07) Transmission Belt Number of speeds Continuous Speed variator type Electronic Speed range with motor at 1500 rpm 50 Hz 3Ph. rpm Upon request: 100-2000 Motor at 1800 rpm 60 Hz 3Ph. (118-2360 rpm) Feed Manual Automatic Manual Automatic Nr. of automatic feeds - 3 - 3 Automatic feed range mm/rev - 0,1-0,2-0,3 - 0,1-0,2-0,3 Worktable dimensions (LxW) mm 400x420 480x480 Column diameter mm 125 150 Distance from spindle centre to column face mm 300 350 Net weight Kg 345 360 370 445 460 470 Gross weight with packing Kg 395 410 420 495 510 520 Packing dimensions (length x width x height) m 2,3x0,6x1,1
Standard equipment Electronic speed variator Potentiometer of speed selector Digital rpm counter RS Automatic feed reversing system for tapping Depth scale and adjustable depth stop Automatic tool ejector Emergency STOP Rightwards turn push button Leftwards turn push button
14
Built-in low voltage electrical equipment in machine head Machined base with coolant tank and pump Worklight Spindle turn selection switch Drill guard with microswitch Fix table plate (34 model) MGI Rotating table plate (40 model) “CE” mark
Optional equipment (*)
ERC Coolant system (independent container) MGI Rotating table plate and tilting support (only for “Z-34”models) MGM Reversible tilttable with vice (only for “Z-34”models) MCC Co-ordinate table over support ACNL Automatic drilling cycle (only for “BZ” models) CI Integral drilling cycle with encoder (only for “BZ” models)
HB Hydro-pneumatic power feed unit UC Union, dragging cone and assembly for multi-spindle heads GM Multi-spindle head guide rod PM START/STOP/EMERGENCY control extension (only for “BZ” models) SC Column riser of 200 mm
(*) On display on pages 36-41
Series ø34 mm ø40 mm
M 27 M 33
3 Kw 4,12 Kw
MT 4 MT 4
150 mm ø125 mm 180 mm ø150 mm
300 mm 350 mm
Z
Electronic speed variator with fixed belt position.
AZ-34 With rotating table plate and tilting support (MGI).
With reversible tiltable with vice (MGM).
With co-ordinate cross table (MCC).
15
X Series, your decision for: Proven success • Optimum mechanical system • Suitable size and capacity Easy to run• Long life • Optimum value for money
Speed range chart
Feed selector
Speed box cover with oil viewer
Worklight switch
Thermomagnetic switch
Coolant switch
Emergency stop
Spindle reversing switch
Automatic tool ejector
Worklight
Coolant hose with tap
Safety drill guard with vertical adjustment and turn stop in case of opening
Solid toolholder shaft
Depth scale and adjustable depth stop
Solid feed control triple gripped
Mechanical clutch
Solid steel column with rectified surface
Oil viewer
Characteristics SX-32 AX-32 Maximum drilling capacity in steel St. 60 ø mm 32 32 Maximum drilling capacity in cast iron 200 Brinell ø mm 35 35 mm M 18 M 22 Maximum tapping capacity in steel St. 60 Maximum tapping capacity in cast iron 200 Brinell mm M 22 M 27 Morse Taper MT Nr. 3 3 mm 150 150 Maximum spindle stroke (drilling depth) Main motor power HP(Kw) 1 (0,75) 1,5 (1,1) Coolant pump motor power HP(Kw) 0,10 (0,07) Transmission Gear box Number of speeds 9 Speed range with motor at 1500 rpm 50 Hz 3Ph. rpm Upon request: 104-152-217-250-365-522-692-1015-1450 Motor at 1800 rpm 60 Hz 3Ph. (125-1740 rpm) Feed Manual Automatic - 2 Number of automatic feeds Automatic feed range mm/rev - 0,1-0,2 Worktable dimensions (LxW) mm 400x420 Column diameter mm 125 Distance from spindle centre to column face mm 300 Net weight Kg 315 330 Gross weight with packing Kg 360 375 m 2,3x0,6x1,1 Packing dimensions (length x width x height)
Standard equipment
Optional equipment (*)
Hardened and ground high quality Machined base with coolant tank VE Variable speed by electronic variator HGP Master guide spindle and nut set for RPF steel gears Worklight VE+TAK Continuous speed by electronic variator HB Hydro-pneumatic power feed unit Speed plate and selecting levers on Drill guard with microswitch with automatic turn reversing system for tapping head front “CE” mark and digital rpm counter Gear box lubrication by automatic pump MGI Rotating table plate and tilting support Depth scale and adjustable depth stop MGM Reversible tilttable with vice Automatic tool ejector MCC Co-ordinate table over support Thermomagnetic switch RS Automatic feed reversing system for tapping Emergency STOP RPF Automatic tapping cycle by lead screw system Spindle reversing switch (*) On display on pages 36-41
16
Series ø32 mm ø32 mm
M 18 M 22
0,75 Kw 1,1 Kw
MT 3 MT 3
150 mm ø125 mm 300 mm 150 mm ø125 mm 300 mm
X
With rotating table plate and tilting support (MGI).
With reversible tiltable with vice (MGM).
With co-ordinate cross table (MCC).
AX-32
17
X Series, your decision for: Innovative design • Variety of alternatives • Suitable size and capacity Easy to run • Long life • Mechanical reliability Thermomagnetic switch
Feed selector
Emergency stop
Depth scale and adjustable depth stop
Oil viewer
Speed range chart
Mechanical clutch
Oil viewer
Automatic tool ejector
Worklight switch Coolant switch
Coolant hose with tap
Worklight
Drill guard with vertical adjustment and turn stop in case of opening
Solid feed control triple gripped
Turn stop push-button
Solid toolholder shaft
Manual reversing push-button Machine model and serial number plate Turn start push-button
Characteristics SX-34 AX-34 BX-34 SX-40 AX-40
Solid steel column with rectified surface
BX-40
Maximum drilling capacity in steel St. 60 ø mm 34 40 Maximum drilling capacity in cast iron 200 Brinell ø mm 40 45 Maximum tapping capacity in steel St. 60 mm M 27 M 33 Maximum tapping capacity in cast iron 200 Brinell mm M 33 M 39 Morse Taper MT Nr. 4 4 Maximum spindle stroke (drilling depth) mm 150 180 Main motor power HP(Kw) 2 (1,5) 3 (2,2) Coolant pump motor power HP(Kw) 0,10 (0,07) Transmission Gear box Number of speeds 9 Speed range with motor at 1500 rpm 50 Hz 3Ph. rpm Upon request: 132-194-277-319-466-666-883-1296-1852 Motor at 1800 rpm 60 Hz 3Ph. (160-2220 rpm) Feed Manual Automatic Manual Automatic Number of automatic feeds - 3 - 3 Automatic feed range mm/rev - 0,1-0,2-0,3 - 0,1-0,2-0,3 Worktable dimensions (LxW) mm 400x420 480x480 Column diameter mm 125 150 Distance from spindle centre to column face mm 300 350 Net weight Kg 385 400 410 475 490 500 Gross weight with packing Kg 435 450 460 525 540 550 m 2,3x0,6x1,1 Packing dimensions (length x width x height)
Standard equipment
Optional equipment (*)
Hardened and ground high quality Machined base with coolant tank MGI Rotating table plate and tilting support (34) CI Integral drilling cycle with encoder steel gears Worklight MGM Reversible tilttable with vice (only for “BX” models) Speed plate and selecting levers on Spindle turn selection switch (only for “X-34”models) HB Hydro-pneumatic power feed unit head front MF Fix table (34) MCC Co-ordinate table over support UC Union, dragging cone and assembly Gear box lubrication by automatic pump MGI Rotating table plate (40) RS Automatic feed reversing system for tapping for multi-spindle heads Depth scale and adjustable depth stop Drill guard with microswitch RPF Automatic tapping cycle by GM Multi-spindle head guide rod Automatic tool ejector “CE” mark lead screw system PM START/STOP/EMERGENCY control Emergency STOP HGP Master guide spindle and nut set for RPF extension (only for “BX”models) Spindle reversing switch ACNL Automatic drilling cycle SC Column riser of 200 mm Built-in low voltage electrical equipment (only for “BX” models) in machine head (*) On display on pages 36-41
18
Series ø34 mm ø40 mm
M 27 M 33
1,5 Kw 2,2 Kw
MT 4 MT 4
150 mm ø125 mm 180 mm ø150 mm
300 mm 350 mm
X
Compact 9 speed box with hardened and ground high quality steel gears.
With rotating table plate and tilting support (MGI).
With reversible tiltable with vice (MGM).
With co-ordinate cross table (MCC).
AX-34
19
A Series, your choice for: Mechanical reliability • Size and ergonomics • Industrial use • Real capacity Variety of sizes • Full equipment • Long life • Lasting value Thermomagnetic switch
Worklight switch
Speed range chart
Spindle reversing switch
Speed box cover with oil viewer
Coolant switch
Turn start push-button
Feed selector
Turn stop push-button
Worklight
Oil viewer
Emergency stop Automatic tool ejector
Coolant hose with tap
Solid steel column with rectified surface
Depth scale and adjustable depth stop
Mechanical clutch
Solid toolholder shaft
Characteristics Maximum drilling capacity in steel St. 60 Maximum drilling capacity in cast iron 200 Brinell Maximum tapping capacity in steel St. 60 Maximum tapping capacity in cast iron 200 Brinell Morse Taper MT Maximum spindle stroke (drilling depth) Main motor power Coolant pump motor power Transmission Number of speeds Speed range with motor at 1500 rpm 50 Hz 3Ph. Upon request: Motor at 1800 rpm 60 Hz 3Ph. Feed Number of automatic feeds Automatic feed range Worktable dimensions (LxW) Column diameter Distance from spindle centre to column face Net weight Gross weight with packing Packing dimensions (length x width x height)
ø mm ø mm mm mm Nr. mm HP(Kw) HP(Kw)
rpm
mm/rev mm mm mm Kg Kg m
Standard equipment Hardened and ground high quality steel gears Speed plate and selecting levers on head front Gear box lubrication by automatic pump Machined base with coolant tank and pump Worklight Rotating table plate Automatic feed and cut-off by mechanical clutch
20
Fine manual Solid feed control feed control with four handles and mechanical clutch
Drill guard with Oil pumping unit vertical adjustment and turn stop in case of opening
A-40
A-50
40 50 M 33 M 40
50 60 M 36 M 42 4
200 3 (2,2)
230 4 (3) 0,10 (0,07) Gear box 9
61-85-123 54-75-109 191-269-390 169-237-344 574-806-1169 507-712-1032 Automatic by mechanical clutch 4 0,1-0,2-0,3-0,4 550x550 175 200 360 400 610 710 695 795 2,5x0,6x1,2 2,6x0,6x1,2
Optional equipment (*) Front hand wheel for fine feed work Depth scale and adjustable depth stop MGI Rotating table plate Automatic tool ejector Built-in low voltage electrical equipment in machine head Emergency STOP Spindle turn selection switch Drill guard with microswitch “CE” mark
RS Automatic feed reversing system for tapping RPF Automatic tapping cycle by lead screw system HGP Master guide spindle and nut set for RPF HB Hydro-pneumatic power feed unit AR Feed range reduced to 50% of their standard values
CN Pneumatic counterbalance for spindle return UC Union, dragging cone and assembly GM Multi-spindle head guide rod SC Column riser of 200 mm
(*) On display on pages 36-41
A
Series ø40 mm ø50 mm
M 33 M 36
With rotating table plate and tilting support (MGI).
2,2 Kw 3 Kw
MT 4 MT 4
200 mm ø175 mm 230 mm ø200 mm
360 mm 400 mm
A-50
21
B Series, your choice for: Easy to run • Mechanical reliability • Technology • Size and ergonomics • Industrial use True capacity • Variety of sizes • Full equipment • Long life • Lasting value Thermomagnetic switch
Turn start push-button
Spindle reversing switch
Speed range chart
Worklight switch
Speed box cover with oil viewer
Coolant switch
Turn stop push-button
Feed selector
Emergency stop Automatic tool ejector
Worklight
Solid toolholder shaft
Coolant hose with tap
Depth scale and adjustable depth stop
Solid toolholder shaft
Characteristics Maximum drilling capacity in steel St. 60 Maximum drilling capacity in cast iron 200 Brinell Maximum tapping capacity in steel St. 60 Maximum tapping capacity in cast iron 200 Brinell Morse Taper MT Maximum spindle stroke (drilling depth) Main motor power Coolant pump motor power Transmission Number of speeds Speed range with motor at 1500 rpm 50 Hz 3Ph. Upon request: Motor at 1800 rpm 60 Hz 3Ph. Feed Number of automatic feeds Automatic feed range Worktable dimensions (LxW) Column diameter Distance from spindle centre to column face Net weight Gross weight with packing Packing dimensions (length x width x height)
ø mm ø mm mm mm Nr. mm HP(Kw) HP(Kw)
22
Oil pumping Oil Drill guard with viewer vertical adjustment unit and turn stop in case of opening
B-40
B-50
B-60
B-70
40 50 M 33 M 40
50 60 M 36 M 42
60 70 M 42 M 50
70 80 M 50 M 60
4 200 3 (2,2)
5 260
230 4 (3)
5,5 (4)
0,10 (0,07)
7,5 (5,5) 0,12 (0,09)
Gear box 9
rpm
mm/rev mm mm mm Kg Kg m
Equipamiento de serie Hardened and ground high quality steel gears Speed plate and selecting levers on head front Gear box lubrication by automatic pump Machined base with coolant tank and pump Worklight MGI Rotating table plate Automatic feed and cut-off by electromagnetic clutch Front hand wheel for fine feed work
Fine manual Solid feed control feed control with four handles and electromagnetic clutch
12 51-64-84-110 64-80-106-138 54-75-109 199-248-328-429 158-198-262-342 169-237-344 507-712-1032 561-701-926-1210 447-559-738-966 Automatic by electromagnetic clutch 4 6 0,1-0,2-0,3-0,4 0,1-0,2-0,3-0,4-0,5-0,6 550x550 600x600 175 200 220 360 400 420 610 720 820 840 695 805 920 940 2,5x0,6x1,2 2,6x0,6x1,2 2,7x0,7x1,2 61-85-123 191-269-390 574-806-1169
Accesorios opcionales (*) Depth scale and adjustable depth stop Automatic tool ejector Built-in low voltage electrical equipment in machine head Emergency STOP Spindle turn selection switch Drill guard with microswitch “CE” mark
RS Automatic feed reversing system for tapping RPF Automatic tapping cycle by lead screw system HGP Master guide spindle and nut set for RPF ACNL Automatic drilling cycle CI Integral drilling cycle with encoder CI+RPF Integral drilling cycle with encoder and pitch controlled tapping with braking system by speed inverter
AR Feed range reduced to 50% of their standard values CN Pneumatic counterbalance for the spindle UC Union, dragging cone and assembly for multi-spindle heads GM Multi-spindle head guide rod PM START/STOP/EMERGENCY control extension SC Column riser of 200 mm (*) On display on pages 36-41
B
Series ø40 mm ø50 mm ø60 mm ø70 mm
M 33 M 36 M 42 M 50
2,2 Kw 3 Kw 4 Kw 5,5 Kw
MT 4 MT 4 MT 5 MT 5
200 mm 230 mm 260 mm 260 mm
ø175 mm ø200 mm ø220 mm ø220 mm
360 mm 400 mm 420 mm 420 mm
With rotating table plate and tilting support (MGI).
B-50
23
C Series, your choice for: Continuous speed range • Digital display of revolutions • Spindle reverse for tapping Easy to run • State of the art technology • Industrial use • Full equipment Speed variator lever by means of conic pulleys
Drill/tap cycle selector
Digital read out system
Fine manual feed control
Electronic speed variator with fixed belt position
Speed range chart
Speed box cover with oil viewer
Feed selector
Thermomagnetic switch
Coolant switch Worklight switch Turn start push-button Turn stop push-button
Machine model and serial number plate Oil viewer
Lever for continuous speed range adjustment
Solid steel Worklight column with switch rectified surface
Emergency Automatic tool stop ejector
Depth scale and adjustable depth stop
Solid feed control with four handles and electromagnetic clutch
Coolant hose with tap
Rpm adjustment control
Drill guard with Oil pumping vertical adjustment unit and turn stop in case of opening
Solid toolholder shaft
Characteristics BC-40V BC-40VE BC-50V BC-50VE Maximum drilling capacity in steel St. 60 ø mm 40 50 Maximum drilling capacity in cast iron 200 Brinell ø mm 50 60 Maximum tapping capacity in steel St. 60 mm M 36 M 42 Maximum tapping capacity in cast iron 200 Brinell mm M 42 M 50 Morse Taper MT Nr. 4 4 Maximum spindle stroke (drilling depth) mm 200 200 Main motor power HP(Kw) 4 (3) 5,5 (4) Coolant pump motor power HP(Kw) 0,10 (0,07) Transmission Belt/Gears Number of speeds Continuous Speed variator type Mechanical Electronic Mechanical Electronic Speed range with motor at 1500 rpm 50 Hz 3Ph. rpm 60 a 200 30 a 230 60 a 200 30 a 230 200 a 600 90 a 730 200 a 600 90 a 730 Speed range selection in 3 steps Upon request motor at 1800 rpm 60 Hz 3Ph. 600 a 1500 190 a 1500 600 a 1500 190 a 1500 Feed Automatic by electromagnetic clutch Number of automatic feeds 4 Automatic feed range mm/rev 0,1-0,2-0,3-0,4 Worktable dimensions (LxW) mm 550x550 Column diameter mm 175 Distance from spindle centre to column face mm 360 Net weight Kg 660 760 Gross weight with packing Kg 750 850 Packing dimensions (length x width x height) m 2,2x0,7x1,2 2,2x0,7x1,3
Standard equipment
Optional equipment (*)
Wide continuous speed range in 3 steps MGI Rotating table plate Built-in low voltage electrical equipment in AR Feed range reduced to 50% of their standard Speed plate and selecting levers Automatic feed and cut-off by machine head values on head front electromagnetic clutch Emergency STOP Mechanical speed variator in “V” model Front hand wheel for fine feed work Spindle turn selection switch Electronic speed variator in “VE” model Depth scale and adjustable Drill guard with microswitch Digital rpm counter in front plate depth stop “CE” mark Gear box lubrication by automatic pump Automatic feed reversing system Machined base with coolant tank and pump for tapping Worklight Automatic tool ejector (*) On display on pages 36-41
24
C
Series ø40 mm ø50 mm
M 36 M 42
3 Kw 4 Kw
MT 4 MT 4
200 mm ø175 mm 200 mm ø175 mm
360 mm 360 mm
With rotating table plate and tilting support (MGI).
BC-40VE
25
P Series, your purchase for: Power • Precision • Productivity • Mechanical reliability • Technology • Industrial use True capacity • Variety of sizes • Complete equipment • Long life • Lasting value
Speed selecting lever
Feed selector Solid feed control with four handles and electromagnetic clutch
Headstock position blocking lever
Fine manual feed control
Control panel
Drill guard with vertical adjustment and turn stop in case of opening
Coolant hose with tap
Characteristics Maximum drilling capacity in steel St. 60 Maximum tapping capacity in steel St. 60 Morse taper MT ISO taper (upon request) Maximum spindle stroke (drilling depth) Main motor power Coolant pump motor power Rise and falling head geared-motor power Transmission Number of speeds Speed range with motor at 1500 rpm 50 Hz 3Ph. Upon request: Motor at 1800 rpm 60 Hz 3Ph. Feed Number of automatic feeds Automatic feed range Worktable dimensions (LxW) Distance from spindle centre to column face Net weight Gross weight with packing Packing dimensions (length x width x height)
ø mm ø mm Nr. Nr. mm HP(Kw) HP(Kw) HP(Kw)
rpm
mm/rev mm mm Kg Kg m
Standard equipment Adjusting of the vertical position of motorreductor the head by geared-motor Hardened and ground high quality steel gears Gear box lubrication by automatic pump Automatic guide greasing by manual pump Speed plate and selecting levers on head front Coolant tank and pump in machine base Worklight Ample fixed worktable Automatic feed and cut-off by electromagnetic clutch Front hand wheel for fine feed work
26
EBP-50
EBP-70
50 M 45 4 40 240 5,5 (4)
70 M 70 5 50 300 10 (7,3) 0,12 (0,09) 1,5 (1,1) Gear box
9 de 68 a 1270
12 de 35 a 1238
de 82 a 1524 de 48 a 1486 Automatic by electromagnetic clutch 4 6 0,1-0,2-0,3-0,4 0,05-0,10-0,15-0,20-0,35-0,50 800 x 600 1040 x 600 460 630 1350 2120 1850 3000 2,58x0,98x1,7 3,11 x 1,42 x 1,95
Accesorios opcionales (*) Depth scale and adjustable depth stop Automatic tool ejector Built-in low voltage electrical equipment in column rear Emergency STOP Rightwards turn push button Leftwards turn push button Drill guard with microswitch “CE” mark
RP Lead screw RPF Automatic tapping cycle by lead HGP Master guide spindle and nut set for RPF ACNL Automatic drilling cycle CI Integral drilling cycle with encoder. CI + RPF Integral drilling cycle with encoder and pitch controlled tapping with braking system by speed inverter AR Feed range reduced to 50% of their standard values LDG Digital read-out system for table axis MH-4 Cross table
CN Pneumatic counterbalance for the spindle UC Union, dragging cone and assembly múltiple GM Multi-spindle head guide rod PM START/STOP/EMERGENCY control extension PMC Suspendel control panel (all functions) ISO-40 ISO-40 spindle with quick tool change nut (only for models 50) ISO-50 ISO-50 spindle with quick tool change nut (only for models 70) (*) On display on pages 36-41
Series ø50 mm ø70 mm
M 45 M 70
4 Kw 7,3 Kw
MT 4 MT 5
240 mm 300 mm
460 mm 630 mm
P
EBP-70
27
F Series, your choice for: Mechanical skill • Creativity • Multifunctional use • Precision Ample cross table • Complete equipment • Reliability Toolholder fixation tie rod
Machine model and serial number plate
STOP Turn left
Solid feed control with four handles and electromagnetic clutch
Travel limit micro
Front speed range chart with double levers for speed selection
Turn right
Disconnet electro-magnetic clutch Head up
Head down
Oil viewer
Speed range selector Feed selector
Travel limit micro
Fine manual feed control
Headstock position blocking lever Manual lubrication pump
Drilling / tapping Worklight switch Emergency stop Coolant switch
Thermomagnetic switch Coolant hose with tap
Automatic / manual tapping cycle
Drill guard with vertical adjustment and turn stop in case of opening
Characteristics
EBF-35
Maximum drilling capacity in steel St. 60 ø mm Maximum milling capacity in steel St. 60 cm3/min Maximum tapping capacity in steel St. 60 mm ISO tape Nr. Morse taper MT (upon request) Nr. Maximum spindle stroke (drilling depth) mm Main motor power HP(Kw) Transmission Number of speeds Speed range with motor at 1500/3000 rpm 50 Hz 3Ph. rpm Upon request: Motor at 1800/3600 rpm 60 Hz 3Ph. (125-2850 rpm) Feed Number of automatic feeds Automatic feed range mm/rev Worktable dimensions (LxW) mm Longitudinal movement of the table (X) mm Cross movement of the table (Y) mm Distance from spindle centre to column face mm Net weight Kg Gross weight with packing Kg Packing dimensions (length x width x height) m
35 55 M 35 30 4 180 1,2 / 2 Gear box 16 94-2225
Standard equipment Adjusting of the vertical position of the head by geared-motor 45º tilting head on both sides of the central axis Hardened and ground high quality steel gears Gear box lubrication by automatic pump Automatic guide greasing by manual pump High/low speed range selector Coolant tank and pump in machine base Worklight
28
113-2670 Automatic by electromagnetic clutch 3 0,1 - 0,18 - 0,24 360 x 1220 700 360 390 910 1400 1,68 x 1,68 x 2,52
Optional equipment (*) Co-ordinate cross table Automatic feed and cut-off by electromagnetic clutch Front hand wheel for fine feed work Depth scale and adjustable depth stop Automatic tool ejector Built-in low voltage electrical equipment in column rear Emergency STOP Spindle turn selection switch Drill guard with microswitch “CE” mark
RS Automatic feed reversing for tapping LDG Digital read-out system for the table TCR Quick tool change nut for ISO-30 RP Lead screw RPF Pitch controlled tapping with braking system by speed inverter HGP Master guide spindle and nut set HGP-S Special master guide spindle and nut set ISO-30 ISO.30 spindle with quick tool change nut ISO-40 ISO.40 spindle with quick tool change nut
SC Column riser ENG X Motorized geared box feed system in x axis ENG Y Motorized geared box feed system in x axis SERVO X Servo feed system in x axis SERVO Y Servo feed system in y axis LDG-1 Digital read-out system for table axis (x) MB Security bimanual command LBC Digital read-out scale
(*) On display on pages 36-41
F
Series ø35 mm
45 cm3
M 30
1,2/2 Kw
MT 4
200 mm
383 mm
EBF-35
29
18 25
18 25
25
32
34 40
32
34 40
40
40
40 50
50
50
K
EK
T
Z
Z
X
X
A
B
C
A
B
Dimensions in mm. A A
B
B
Drill with fixed table and rise and falling head
AxB
AxB
390 x 520
600 x 600
A A
Drill with extralarge fixed table and rise and falling head
B
B
AxB
AxB
390 x 1040 390 x 1560 390 x 2080 390 x 2600 390 x 3120
600 x 1200 600 x 2000 600 x 2680 600 x 3280 600 x 3880
A
B
A
B
Drill batteries 2 to 6 headstocks
AxB
AxB
390 x 1040 390 x 1560 390 x 2080 390 x 2600 390 x 3120
600 x 1200 600 x 2000 600 x 2680 600 x 3120 600 x 3720
Check page 44-45 for models and dimensions
30
Drill batteries round column An ample fixed work table is often interesting because: • it offers greater convenience for the positioning of the necessary parts and elements, • bulky or heavy pieces can be secured to the work table. For these cases we offer our drill batteries, machines whose construction has one over-riding rule: flexibility. As well as for bulky or heavy pieces, these assemblies are very interesting
for jobs in big batches where the piece must receive more than one operation as it moves from one machine head to another, receiving each operation in turn. Naturally, each machine head can be equipped differently according to the function of the operation (automatic drilling cycle, automatic tapping cycle, spotfacing, etc.). One of the highlights of these drill batteries is that the machine heads can rotate radially extending the field of applications, allowing a greater number of operations without
having to move the piece around the worktable. In IBARMIA we offer you an endless number of combinations so that you can set up the machine to match your needs exactly. Tables of different widths and/or lengths can be combined with one, two, three… up to six machines heads. Detailed information on the different sizes of table and number of machine heads can be found on pages 46-47.
6A-50
31
EBP-70 STANDARD with PMC pendent control panel.
AVAILABLE TABLES
EBP-50
EBP-70
AxB
AxB
600 x 800 600 x 1400 600 x 2080 600 x 2680
A
B
600 x 1040 600 x 1840 600 x 2640 600 x 3440
Dimensions in mm.
BP-50 with extralarge table of 400 x 1500 mm. for the drilling of rods using a multi-spindle drilling head arranged in a line.
32
4BP-40 drill battery with a 400 x 2050 mm. worktable supplied to a subcontractor of the railway industry.
Drill batteries prismatic column These assemblies are extremely interesting in jobs of long production series where the piece undergoes more than one operation, moving from one machine head to another, recei-
ving each operation in turn. Naturally, each machine head can be equipped differently according to the function of the operation (automatic drilling cycle, automatic tapping cycle, spot-
facing, etc.). In many cases, these solutions are much more productive than machines such as machining centres and at a much lower cost
3BP-50
33
Special constructions
Hydraulic self-centering clamping tools for automotion hinge.
Simultaneous drilling of 76 holes in a paddle pallet. 2 Headstock drill battery (drill/tap by means of master guide spindle and nut set) for automotion hinge.
Special constructions Pneumatic self-centering 3 jaw chuck with syncronized open/close cycle.
4 Positions rotating table for circular drill battery with syncronized hydraulic clamping tools.
2 Headstock drill battery including full guarding, automatic doors, working area division, syncronized clamping tools, automatic chip conveyor and outside control panel.
34
of round column
Special constructions Our experience comes from the manufacturing of hundreds of machines, hand in hand with our clients, carrying out in practice projects of “shared engineering”: responding to the problems and needs that the client has with solutions that our experience tells us are the most appropriate. This sharing of needs and experience has led to ingenious solutions and machines. Numerous applications of our machines are to be found in the automobile components sector, manufacturing of valves, flanges, etc., providing solutions for productivity and cost machine/piece which are unbeatable even by the most sophisticated numerical control machines.
Drill with rotating head over double table base. The back lower table allows working on big pieces.
of prismatic column Multi-spindle headstock drilling of car handwheels, under strict technical and security standards.
Multi-spindle headstock drilling detail of car handwheels.
4 Positions circular drill battery: • Position 1: loading with automatic regulation of the piece length. • Position 2: drilling operation. • Position 3: tapping operation. • Position 4: automatic ejection of the pieces to the basket.
35
Cabinets / Bases
PKA Floor cabinet with 2 shelves. Available for K/T series.
PKB Floor cabinet with door and drawer. Available for K/T series.
ERC Coolant system (independent container). Available for K/T series.
Tables including
MF Fixed table. Standard for K/T/Z/X(32-34) series.
MG Rotating table plate. Optional for KL/TL model.
MGI Rotating table plate and tilting support. Available for Z/X/A/B/C series.
MFM Reversible tiltable with vice. Available for K/T series.
Cross
MB1 Cross table. X = 220 mm. Y = 140 mm. Table net weight = 25 kg. Available for K/T series.
36
MB2 Cross table. X = 280 mm. Y = 180 mm. Table net weight = 40 kg. Available for Z/X series.
MB3 Cross table. X = 400 mm. Y = 180 mm. Table net weight = 52 kg. Available for Z/X(32-34) series.
MB4 Cross table. X = 500 mm. Y = 250 mm. Table net weight = 93 kg. Available Z/X/A/B/C series.
Equipment / Containers / Light
ERB "T" slotted machine base with coolant pump. Standard for Z/X/A/B/C series.
PV Safety drill guard against chips with a micro-switch. Standard in all series.
EL Worklight. Standard in all series
support
MGM Reversible rotating tiltable with vice. Available for Z/X (32/34) series.
MCC-100 Cross table over support. Optional for K/T series.
MCC-125 Cross table over support. Available for Z/X (32/34) series.
MCC-150 Cross table over support. Available for Z/X (40) series.
tables
MB5 Cross table. X = 700 mm. Y = 250 mm. Table net weight = 150 kg. Available for Z/X(40)/A/B/C series.
SERVO X / SERVO Y Electronic “SERVO” feed unit for X/Y axis. Feed range: 20 to 1000 mm/min.
37
Speed control /
VE Standard for Z(34-40), BC-40VE and BC-50VE. Available for other models upon request.
TAK Digital rpm counter. Standard for Z(34-40) and C serie. Available for other models upon request.
LBC Depth scale read-out system. Available for all series.
LDG Digital read-out system for the table.
Speed control /
CN Pneumatic counterbalance for spindle return (recommended with multi-spindle head applications). Available for X/A/B/P series.
ACNL Automatic drilling cycle with rapid approach, working feed and rapid retract. Available for B models on Z/X/B/P series.
CI Integral drilling cycle with encoder (recommended for tube and profile drilling, deep drilling operations, etc.). Available for B models on Z/X/B/P series.
HB Hydro-pneumatic power feed unit. Available for K/T/Z/X/A series (only for manual feed models).
Standard assembly for jobs using multi-spindle heads: ACCESSORIES AND FUNCTIONS
ACNL Automatic drilling cycle with rapid appproach, working feed and rapid retract, with additional pneumatic counterweight function for the multi-spindle head. UC Union, dragging cone and assembly of the multi-spindle head. CM Multi-spindle head with fixed or adjustable (see picture) spindles.
38
GM Multi-spindle head guide rod. PM START/STOP and emergency STOP control extensión. SC Column riser of 200 mm for greater distance between spindle nose and worktable.
Equipment Measure / Tapping
RS Automatic feed reversing for tapping. Standard for Z(34-40) y C serie. Available for all series.
RPF Automatic tapping cycle by lead screw system with brake motor for spindle reverse. Available for X/A/B/P series.
HGP Master guide spindle and nut set. Available for X/A/B/P series.
Measure / Tapping
CM Multi-spindle drilling heads with fixed or adjustable spindles. Available for all series.
AR 50% lowered feed rate range. Available for A/B/C series.
ACNL
MQL Microlubrification system. Available for all series.
ACNL
UC UC SC
GM PM CM
GM PM CM
39
Standard
SL-116 Vise with fixed base (Light Series). Maximum opening: 116 mm Jaw width: 105 mm Jaw height: 31,5 mm Net weight: 8,5 kg. Available for K/T/Z/X/A/B/C series.
SL-160 Vise with fixed base (Light Series). Maximum opening: 160 mm Jaw width: 125 mm Jaw height: 41,5 mm Net weight: 4,7 kg. Available for K/T/Z/X/A/B/C series.
FL-116 Vise with fixed base. Maximum opening: 116 mm. Jaw width: 100 mm. Jaw height: 31,5 mm. Net weight: 9 Kg. Available for Z/X/A/B/C series.
FL-157 Vise with fixed base. Maximum opening: 157 mm. Jaw width: 125 mm. Jaw height: 41,5 mm. Net weight: 15 Kg. Available for Z/X/A/B/C series.
Rapid close and self-centering vices
FR-80 Opening-cam rapid close vice. Maximum opening: 80 mm. Jaw width: 80 mm. Jaw height: 20 mm. Net weight: 6 Kg. Available for all series.
FR-125 Opening-cam rapid close vice. Maximum opening: 125 mm. Jaw width: 125 mm. Jaw height: 30 mm. Net weight: 23 Kg. Available for all series.
FK-103 Self-centering vice. Maximum opening: 103 mm. Jaw width: 103 mm. Jaw height: 20 mm. Net weight: 12 Kg. Available for all series.
DRILL-CHUCKS Self-centering drill-chuck from dia. 3 to dia.16 Morse taper 3 & 4. Available for all series.
TAPHOLDER Morse taper, tapholder and tapping collets.
REDUCING SLEEVES Different reducing sleeves for Morse tapers. Available for all series.
ISO 40 Spindle with Available for ISO 50 Spindle with Available for
40
quick change nut. EBP-50 models. quick change nut. EBP-70 models.
Equipment vices
FS-150 Vise with fixed base (Heavy Series). Maximum opening: 150 mm. Jaw width: 150 mm. Jaw height: 44 mm. Net weight: 28 Kg. Available for A/B/C/P/F series.
FG-150 Vise with swiveling base (Heavy Series). Maximum opening: 150 mm. Jaw width: 150 mm. Jaw height: 44 mm. Net weight: 37 Kg. Available for A/B/C/P/F series.
Chucks, foot pedals…
PL Manual jaw chuck. Available for all series.
PN Pneumatic jaw chucks. Available for all series.
PST Cycle or spindle turn START foot pedal. PSR Spindle turn reverse foot pedal (for tapping) Available for all series.
PEM Emergency STOP foot pedal. Available for all series.
PMC Pendent control panel (all functions). Available for P serie.
41
1090
250
100
270x300
880
1210
1890
270x300
1780
105 - 640
100
530 80
Max.1870
80
250
100
270x270
Series
95
800
880
250
800
110 - 500
K
560x380
560x380
KS - 18 / KS - 25
KM - 18 / KM - 25
Series
1160
250
15
100 2020
270x300
880
27
95
800
800
880
1190
13 11
120 - 650
1960
270x300
600x380
560x380
EKM - 18 / EKM - 25
Series
1330
120 - 650
250 270x300
95
800
880
800
880
1170
270x300
100 2130
80
500
270x270
100
Max.2110
250 250 80
155 - 485
50 - 440
T
EKL - 18 / EKL - 25
560x380
TS - 25
42
560x380
TM - 25
600x380
TL - 25
100 2020
560x380
EKS - 18 / EKS - 25
75
100
510
270x270
80
Max.1940
100
KL - 18 / KL - 25
75
250 250 80
155 - 485
50 - 440
EK
600x380
Dimensions round column Dimensions in mm.
350
150
1225
480x480
1980
125
300 400x420
1250
1310
SZ - 34 AZ - 34 BZ - 34
SZ - 32 AZ - 32V
755x480
114
655x400
104
104
655x400
80 - 880
1960
125
400x420
1950
300
Series
90 - 890
150 - 950
Z
SZ - 40 AZ - 40 BZ - 40
16 125
121
125
12 16
121
28
SX - 34 AX - 34 BX - 34
2280
150
121
755x480
SX - 40 AX - 40 BX - 40 125
125
12 16
121
350 480x480
1225
1250
SX - 32 AX - 32
16
655x400
104
104
655x400
125
2195
300 400x420
80 - 880
400x420
Series
114
90 - 890
125
2230
300
1290
125 - 925
X
28
43
Dimensions round column
220
144
1270
1290 144
1240 134
420 600x600
950x550
1060x600
1060x600
B - 60 B - 70
A - 50 B - 50
A - 40 B - 40 16 160
160
191
12 16
191
18
C
12
20
28
Series
30
16
12 16
134
28
950x550
BC - 40V BC - 40VE BC - 50V BC - 50VE
44
160
175
2170
360 550x550
1260
55 - 850
160
2640
200
400 550x550
25 - 825
Series
2450
175
50 - 850
360 550x550
/ B
Series
2370
35 - 835
A
Dimensions prismatic column Dimensions in mm.
F
Series
Max.2600
2450 360
X=600 mm
Y=250 mm
1520
700 1660
EBF - 35
95
95
16
12 16
880
190 - 650
1220
28
45
(1...6) EKS - 18 (1...6) EKS - 25
(1...6) TS - 25
(1...6) SZ - 32 (1...6) AZ - 32V
975
(1...6) SX - 32 (1...6) AX - 32
975
(1...6) SX - 34 (1...6) AX - 34 (1...6) BX - 34
375 - 1050
Series
360
175
W
900
W
150
Max.2815
315 - 995
350
900
W
Max.2700
280 - 960
Max.2765
150
900
900
287,5
C
Series
1045
(1...6) SX - 40 (1...6) AX - 40 (1...6) BX - 40
975
(1...6) BC - 40 (1...6) BC - 40 VE (1...6) BC - 50 (1...6) BC - 50 VE
Max.2725
1045
(1...6) SZ - 40 (1...6) AZ - 40 (1...6) BZ - 40
W
150 2159,002
980
(1...6) SZ - 34 (1...6) AZ - 34 (1...6) BZ - 34
150
Max.2185
350 W
900
W
315 - 990
150 Max.2455
287,5
16
Series
980
287,5
80
115
28
900
W
210 - 890
Max.2345
150
115
12 16
(1...6) KS - 18 (1...6) KS - 25
287,5
W=390 80
865
900
320 - 900
100
865
X
345 - 1025
250 W
865
Z
46
100
900
Max.1920
900
250 W
Series
900
100
Max.1990
250 W
T
Series
155 - 580
EK
Series
155 - 580
110 - 580
K
Dimensions of drill batteries round column A Series / B Series Dimensions in mm.
W=390 80
115
W=600
115
80
80
220
220
80
12 16
220
Max.3280
420
28
W
900
W
Max.3100
200
355 - 1155
400
900
900
W
Max.2890
175
360
375 - 1175
325 - 1000
16
1355
(1...6) A - 40 (1...6) B - 40
1345
(1...6) A - 50 (1...6) B - 50
(1...6) B - 60 (1...6) B - 70
M L
MODEL 1KS-18 1KS-25 1EKS-18 1EKS-25
MODEL
W
L
M
390
520
680
M
W
L
M
600
600
800
L
1TS-25
1SZ-32 1AZ-32V
1SX-32 1AX-32
1SZ-34/40 1SX-34/40 1AZ-34/40 1AX-34/40 1BZ-34/40 1BX-34/40
1A-40 1B-40
1A-50 1B-50
1B-60
1B-70
Optional tables MODEL 1KS-18 1KS-25 1EKS-18 1EKS-25
1TS-25
1SZ-32 1AZ-32V
1SX-32 1AX-32
1SZ-34/40 1SX-34/40 1AZ-34/40 1AX-34/40 1BZ-34/40 1BX-34/40
1A-40 1B-40
W 390 390 390 390 390
N
N
L 1040 1560 2080 2600 3120
M L N
Optional tables M 1200 1720 2240 2760 3280
MODEL 1A-50 1B-50 N
1B-60
1B-60
N
MODEL
M L N
N
N
N
N
S-18 2KS-25 2EKS-18 2EKS-25 3KS-18 3KS-25 3EKS-18 3EKS-25 4KS-18 4KS-25 4EKS-18 4EKS-25 5KS-18 5KS-25 5EKS-18 5EKS-25 6KS-18 6KS-25 6EKS-18 6EKS-25
W 600 600 600 600 600
L 1200 2000 2680 3280 3880
M 1400 2200 2880 3480 4080
W
L
M
N
2A-40 2B-40
390
1040
1200
550
3SZ-34/40 3SX-34/40 3SZ-32 3SX-32 3AZ-34/40 3AX-34/40 3AZ-32V 3AX-32 3BZ-34/40 3BX-34/40
3A-40 3B-40
390
1560
1720
550
4TS-25
4SZ-34/40 4SX-34/40 4SZ-32 4SX-32 4AZ-34/40 4AX-34/40 4AZ-32V 4AX-32 4BZ-34/40 4BX-34/40
4A-40 4B-40
390
2080
2240
550
5TS-25
5SZ-34/40 5SX-34/40 5SZ-32 5SX-32 5AZ-34/40 5AX-34/40 5AZ-32V 5AX-32 5BZ-34/40 5BX-34/40
5A-40 5B-40
390
2600
2760
550
6TS-25
6SZ-34/40 6SX-34/40 6SZ-32 6SX-32 6AZ-34/40 6AX-34/40 6AZ-32V 6AX-32 6BZ-34/40 6BX-34/40
6A-40 6B-40
390
3120
3280
550
2SZ-34/40 2SX-34/40 2SZ-32 2SX-32 2TS-25 2AZ-34/40 2AX-34/40 2AZ-32V 2AX-32 2BZ-34/40 2BX-34/40 3TS-25
MODEL 2A-50 2B-50 3A-50 3B-50 4A-50 4B-50 5A-50 5B-50 6A-50 6B-50
2B-60 2B-70 3B-60 3B-70 4B-60 4B-70 5B-60 5B-70 6B-60 6B-70
W
L
M
N
600
1200
1400
700
600
2000
2200
700
600
2680
2880
700
600
3120
3320
700
600
3720
3920
700
47
3320
Max.3840
640 540 - 1470
2690
250 - 1000
460
Series
600
600
700
700
Max.2710
P
1550
1890
(1...6) EBP - 70
(1...6) EBP - 50
220
16
12 16
220
28
48
Dimensions of drill batteries prismatic column Dimensions in mm.
P
Series
M L N
N
N
N
N
MODEL
L
M
N
MODEL
L
M
N
EBP-50
800
1010
–
EBP-70
1040
1290
–
2EBP-50
1400
1610
700
2EBP-70
1840
2090
800
3EBP-50
2080
2290
700
3EBP-70
2640
2890
800
4EBP-50
2680
2890
700
4EBP-70
3440
3690
800
5EBP-50
3480
3690
700
5EBP-70
4160
4410
800
6EBP-50
4080
4290
700
6EBP-70
5360
5610
800
49
GENERAL SALE INFORMATION
COMMERCIAL: ✓P acking included: cardboard for Series K, T, Z, X and crate packing for the rest. (Check extra prices for seaworthy packing). he content of this catalogue is merely informative. All prices and models ✓T as well as specifications and accessories are subjected to change without prior notice. ✓ Request our General Catalogue without obligation.
TECHNICAL: ✓ Our machines fulfil safety requirements and are CE marked. ✓ Voltage requirement must always be specified when ordering. ✓F or drilling machines equipped with frequency speed inverter, at some facilities where welding machines are working, it may be necessary to install a filter to protect the inverter. achines are supplied in two colour combination Light Grey RAL7004 ✓M with Dark Grey RAL7466. Extra charge for other colours. here may be incompatibilities among some options. Please check with ✓T us for specific option combinations available for your machine. ✓O ne year Guarantee against manufacturing defects. This will be invalidated if misuse of the machine is proven. Please read the instruction manual supplied with each machine. It will be of great help. ✓M odels described in this catalogue represent the manufacturing standard line. Please check prices for models with different characteristics to the ones specified in the price list.
50
Subject to change without prior notice
Pol. Ind. Txerloie nº 3 - Apdo. 99 20720 AZKOITIA (Gipuzkoa) - SPAIN Tel. +34 943 851327 Fax. +34 943 851078
[email protected] www.ibarmianiversal.com