Knee Type Milling Machines

Rugged, Powerful & Accurate Knee Type Milling Machines In Horizontal, Vertical & Universal Versions http://www.MF-Dienstleistungen.de Switching / S...
Author: Audra Gibbs
5 downloads 2 Views 386KB Size
Rugged, Powerful & Accurate

Knee Type Milling Machines In Horizontal, Vertical & Universal Versions

http://www.MF-Dienstleistungen.de

Switching / Selling Manfred Fedler jun. MF Servicec Telephone : 0049 (0) 7022-24359-51 Fax : 0049 (0) 7022-24359-61 E-mail : [email protected] Aloys-Senefelder-Strasse 8 D-72636 Frickenhausen / Germany Versions Horizontal Vertical Universal

Standard Models Size 1 Size 2 Size 3.5 HF1 HF2 HF3.5 VF1 VF2 VF3.5 UF1 UF2 UF3.5

Optional Models Size 1 Size 2 Size 3.5 HF1E HF2E HF3.5E VF1E VF2E VF3.5E

Bharat Fritz Werner Ltd.

Knee Type Milling Machines Standard Models : HF1, VF1, UF1, HF2, VF2, UF2, HF3.5, VF3.5, UF3.5 Rugged, powerful and precision knee type milling mahines are offered in Horizontal, Vertical and Universal versions in size 1, size 2 and size 3.5 models to suit the varied requirements of the customer. Electrical cycle controlled models in horizontal and vertical versions are offered for series and mass production of components. Features Rigid Structure The rigid spindle housing, cross ribbed box type column structure, closed box type knee design ensure optimum chip removal capacity and surface finish. The rigid structure ensures vibration free and smooth machining.

Milling head can be moved away from work position quickly with ease and parked on the side of the column

Work spindle Optimum spacing of precision taper roller bearings ensure vibration free cutting. The bearing preload is adjusted by a common nut.

Vertical milling head can be swivelled either side of vertical by 45deg. Three lever control for spindle speed selection

Column mounted electrical cabinet Three lever control for feed selection

Vertical Milling Machine VF1 Power operated feedin longitudinal & cross directions for standard Size 1 machine. Rapid feed in longitudinal direction as option. Guides Table, cross slide and the knee slide in dovetail guide ways. The dovetail guide ways are amply dimensioned to resist extreme machining loads. The guide ways are protected constantly from the ingress of swarf and coolant.

Table drive Lead screw with 2 nuts for backlash free setting. Feed selection by sliding gear drive. Reversal of movement direction by motor reversal, dead accurate stop by brake clutch. Change over and rapid traverse feed by multi disc clutch.

Power operated feed and rapid traverse in longitudinal, cross and vertical directions for Size 2 & 3.5 models.

Rigid over-arm makes overarm brace superfluous

Differential thread clamping system for knee ensures higher clamping force.

Chip collection and coolant diversion with large tray below the table

Built-in coolant tank in machine base

Large tray on the base plate to collect chip and coolant

Horizontal Milling Machine HF 3.5

Universal Milling Machine UF2

Lubrication Central lubrication for guide ways and leadscrews. Splash lubrication for speed and feed gearing. Coolant An electric pump mounted at the rear of the machine base ensures copious flow of coolant to the work zone. The coolant is discharged in to the built - in coolant tank in the machine base.

T Motorised Over Arm (MOA) An added advantage of vertical spindle on horizontal and universal machines on size 2 and size 3.5 models. MOA is supplied with a vertical milling head. A manual quill stroke of 70 mm is available on milling head. MOA comes with independent drive motor of 3kW (4HP) power. Spindle is provided with 12 speeds in the range 45 - 2000 rpm and ISO 40 taper. Since MOA itself is used as over arm for mounting arbor support bracket, the machine doesn’t require normal over arm.

Electrical cycle controlled Machines as option Models :HF1E, VF1E, HF2E, VF2E, HF3.5E, VF3.5E These special version machines are provided with highly reliable Programmable Logic Controller (PLC) which enables programming of table movement in longitudinal direction. Extremely useful for series and mass production of components with consistent accuracy, these machines ensure minimum idle time and optimum efficiency.

Attachments and Accessories for Increased Flexibility VMH can be swiveled 45 deg. on either side and clamped. The quill carrying the cutter spindle can be moved manually along its axis up or down and clamped in the desired position. Four position turret stop and rapid quill movement facility (for size 1 & size 2 machines only) are provided as optional features on vertical milling head.

RMA permits manufacturing of racks with all modules normally required. Suitable for horizontal and universal versions, it consists of a milling unit, a fixture and a manually operated dividing attachment connected to the table drive lead screw.

Machine vices are offered with a solid base and also a swivel base. They are supplied with jaw width 100 – 250mm and clamping capacity up to 150mm.

Used for milling of accurate radial grooves & slots and drilling radial holes in round components. It can be used for vertical or horizontal positions.

Ideal for circular dividing, these are used for accurate rotary movements. They are offered in 250mm dia. and 400mm dia. Motorized version is supplied for 400 mm table. UDH allows simple, differential and compound dividing. With universal milling machine it can also be used for spiral milling. Spindle axis can be tilted in the vertical plane.

This equipment can be used for milling and drilling operations whenever direct indexing up to 12 or 24 divisions is required.

Consists of a fixed base over which a swivel base and slotting ram are mounted. The drive from the machine spindle is transmitted as a reciprocating motion to the ram for machining of slots.

MACHINE DIMENSIONS

Details A1 A2 A3 A4* A5* B1 B2 B3 B4 B5 B6 C1 C2 C3 C4 C5 C6 C7

Min Max

Min Max

Min Max

Horizontal HF1 HF2 HF1E HF2E 1960 2450 500 500 940 1155 1105 1350 245 335 805 1135 1480 1730 1407 1657 1100 1295 -10 90 380 490 115 145 1591 1900 1050 1060 230 315 465 465 43 43 40.5 27.5 290.5 257.5

HF3.5 HF3.5E 3600 700 1800 1630 180 1380 2120 2047 1565 70 520 185 2550 1500 355 589 55 21.5 341.5

Vertical VF1 VF1E 1960 500 940 1105 245 805 1691 1167 57 447 70 1591 1050 230 250 40.5 290.5

VF2 VF2E 2450 500 1155 1350 335 1135 1890 1367 162 562 70 1900 1060 315 300 27.5 257.5

*Dimensions given for left end of clamping table clamping area

Universal VF3.5 UF1 VF3.5E 3600 1975 700 500 1800 1045 1630 1090 180 265 1380 825 1480 2345 1407 1626 1100 131 -10 581 330 115 100 2550 1591 1500 1050 355 230 465 43 360 21.5 40.5 341.5 290.5

UF2

UF3.5

2730 500 1280 1350 335 1135 1730 1657 1295 50 450 145 1900 1060 315 465 43 17.5 247.5

3410 700 1681 1630 380 1380 2120 2047 1565 70 470 185 2550 1500 315 589 55 54 347

TECHNICAL DATA

Horizontal HF2 HF2E

Vertical

Unit

HF1 HF1E

Table overall size (L x W)

mm

Clamping area

mm

T-slots No./Width/CD

mm

3/14/45

3/14/63

3/18/100

Swivel range of table

degrees -

-

-

 

 

 

 

Automatic

mm

560

800

Manual

mm

590

830

Automatic

mm

250

Manual

mm

Automatic Manual Quill stroke, manual

Universal

HF3.5 HF3.5E

VF1 VF1E

VF2 VF2E

VF3.5 VF3.5E

UF1

UF2

UF3.5

1245 x 230 1555 x 315

2055 x 355

1245 x 230

1555 x 315

2055 x 355 1175 x 230 1555 x 315 2055 x 315

1000 x 230 1350 x 315

1630 x 355

1000 x 230

1350 x 315

1630 x 355 1000 x 230 1350 x 315 1630 x 315

3/14/45

3/14/63

3/18/100

3/14/45

3/14/63

3/18/100

-

-

-

45

45

45

 

 

 

   

1200

560

800

1200

560

800

1000

1230

590

830

1230

590

830

1030

230

320

250

230

320

250

230

320

270

260

350

270

260

350

270

260

350

mm

-

400

450

-

400

450

-

400

400

mm

390

420

470

390

420

470

340

420

420

mm

to both sides Longitudinal movement

Traverse movement

Vertical movement 

-

-

-

70

70

100

-

-

-

Milling spindle front bearing Ø mm

70

85

95

70

85

95

70

85

95

Spindle taper

ISO

40

40

50

40

40

50

40

40

50

Vertical milling head

degrees -

-

-

45

45

45

-

-

-

rpm

45-2000

45-2000

35.5-1800

45-2000

45-2000

35.5-1800

45-2000

35.5-1800

35.5-1800

12/1.4

12/1.4

18/12.25

12/1.4

12/1.4

18/1.25

12/1.4

12/1.4

18/1.25

18

18

21

18

18

21

18

18

21

swivelling to both side (Graduated upto 50 deg.) Speed Range No./progression No. of Feeds

Nos.

Feed range (Prog. 1.25) Longitudinal

mm/min 16-800

16-800

16-1600

16-800

16-800

16-1600

16-800

16-800

16-1600

Transverse

mm/min 16-800

16-800

16-1600

16-800

16-800

16-1600

16-800

16-800

16-1600

Vertical

mm/min -

4-200

4-400

-

4-200

4-400

-

4-200

6.6-630

Longitudinal

mm/min 2500**

4000

4000

2500**

4000

4000

-

2500

2000

Transverse

mm/min -

4000

4000

-

4000

4000

-

2500

2000

mm/min -

1000

1000

-

1000

1000

-

630

800

kW

5.5

11

3

5.5

11

3

5.5

11

Rapid traverse

Vertical Milling spindle motor

3

Feed motor

kW

0.75

1.5

1.3/2.2*

0.75

1.5

1.3/2.2*

0.75

1.5

1.3/2.2*

Max. safe Weight

Kg

170

400

600

170

400

600

170

400

400

Kg

1700

2200

3650

1800

2250

3760

1700

2300

3850

on the table Weight/Nett (approx.) *2 Speed Motors **Only for HF1E & VF1E machines

Bharat Fritz Werner Ltd. Off Tumkur Road, Bangalore - 560 022, Ph: (080) 28395745, Fax: (080) 2394816 E-mail: [email protected] URL: www.bfwindia.com REDIONAL OFFICES BANGALORE: CHENNAI: COIMBATORE: HYDERABAD: KOLKATA: MUMBAI: NEW DELHI: PUNE:

Off Tumkur Road, Bangalore - 560 022, Ph: (080) 28395745, Fax: (080) 2394816 E-mail: [email protected] 4G, Century Plaza, 560/562, Mount Road, Chennai - 600 018. Ph: (044) 24349229, 24343367. Fax: (044) 24343367.E-mail: [email protected] B-7, Thasami Apartments, 219, Dr. Subbarayan Street, Tatabad, Coimbatore - 641 012. Ph: (0422) 2494051 E-mail: [email protected] Flat No.204, 1-11-299, Ramaveda Sirisampada Apt., Near Shyamlal Bldgs., Begumpet, Hyderabad - 500 016. Ph: (040) 27762035. E-mail: [email protected] 8, India Exchange Place, Ruby House (6th Floor), Kolkata - 700 001. Ph: (033) 22429334, 22429140. Fax: (033) 22327286. E-mail: [email protected] 206, Runwal Commercial Complex, II Floor, LBS Marg, Mulund West, Mumbai - 400 080. Ph: (022) 25653362, 25913963. Fax: (022) 25653392. E-mail: [email protected] 510, Mahatta Towers, B-Block, Community Center, Janakpuri, New Delhi - 110 058. Ph: 25522210, 25522214. Fax: 25530696. E-mail: [email protected] 721/2A, Indulal Complex, III Floor, South Wing, No.307/308, LB Shastri Road, Navipeth, Pune - 411 030. Ph: (020) 4332247. Fax: (020) 4321824. E-mail: [email protected]

Since we are continuosly working on the development of our products, the information contained in this brochure is subject to modification

Suggest Documents