Air Brake (Dot approved)
Air brake Fittings for Air brake Tubing Compression Air Brake Fittings
DOT AIR BRAKE FITTINGS FOR NYLON TUBING
AS
T EN
A
E
• Advantages: low cost, many styles available, no flare required, easy to assemble • Exceeds DOT pressure requirements for air brake systems. RT M SO • Use with SAE J844 Type A or B nylon tubing. #198-1 • Meets FMVSS 571.106 requirements. #398-1 V L AI • Material: Brass LAB • Primary applications: air brake systems, air controls and gauge lines • DOT Approved
Tube O.D. Thread Size
5/32 5/16–24
1/4 7/16–24
3/8 1/2 5/8 3/4 17/32–24 11/16–20 13/16–18 1"–18
Note: Fittings are shipped with nuts, sleeves, and inserts pre-assembled and ready to slip onto tubing.
Sleeve (Ferrule)
Stainless steel insert
Part No.
Cross Reference
Tube O.D.
Pipe Thread
Qty.
90709 90650 90651 90652 90653 90654
1460x3 1460x4 1460x6 1460x8 1460x10 1460x12
3/16 1/4 3/8 1/2 5/8 3/4
— — — — — —
25 50 50 25 25 25
Part No.
Cross Reference
Tube O.D.
Pipe Thread
Qty.
92329 ★ 92326 90739 90740 90741 90742 90743
2030x2 63NTAx3 63NTAx4 63NTAx6 63NTAx 8 63NTAx10 63NTAx12
1/8 3/16 1/4 3/8 1/2 5/8 3/4
— — — — — — —
100 100 50 50 50 25 25
★ Brass
Brass insert
Nut
Union
Union Tee
Union Elbow
Part No.
Cross Reference
Tube O.D.
Pipe Thread
Qty.
90725 90726 90727 90728
1484x4 1484x6 1484x8 1484x10
1/4 3/8 1/2 5/8
— — — —
50 50 50 25
Part No.
Cross Reference
Tube O.D.
Pipe Thread
Qty.
90655 90656 90657 90658 90659
1461x4 1461x6 1461x8 1461x10 1461x12
1/4 3/8 1/2 5/8 3/4
— — — — —
20 20 10 10 10
Part No.
Cross Reference
Tube O.D.
Pipe Thread
Qty.
90660 90661 90662 90663 90664
1462x4 1462x6 1462x8 1462x10 1462x12
1/4 3/8 1/2 5/8 3/4
— — — — —
10 10 10 10 10
Part No.
Cross Reference
O.D. Left
O.D. Right
O.D. Center
Qty.
90679 90667 90666 90670 90669 90642
1464x4 1464x6x6x4 1464x6 1464x8x8x6 1464x8 1464x10
1/4 3/8 3/8 1/2 1/2 5/8
1/4 3/8 3/8 1/2 1/2 5/8
1/4 1/4 3/8 3/8 1/2 5/8
5 5 5 5 5 2
Part No.
Cross Reference
Tube O.D.
Pipe Thread
Qty.
90775 90671 90672 90673
1465x4 1465x6 1465x8 1465x10
1/4 3/8 1/2 5/8
— — — —
5 5 5 5
Personal Customer Service / Same Day Shipping / No Risk Guarantee
G1
Air Brake (Dot approved)
Air brake Fittings for Air brake Tubing Compression Air Brake Fittings
Female Connector
Bulkhead union
Male Connector
Male Swivel Connector
90° Male Elbow
90° Long Male Elbow
90° Female Elbow
G2
call
1-800-558-2808 /
fax
Part No.
Cross Reference
Tube O.D.
Pipe Thread
Qty.
90798 90799 90675 90674 90676 90677
1466x4x4 1466x4 1466x6x2 1466x6 1466x6x6 1466x8
1/4 1/4 3/8 3/8 3/8 1/2
1/8 1/4 1/8 1/4 3/8 3/8
5 5 5 5 5 5
Part No.
Cross Reference
Tube O.D.
Pipe Thread
Qty.
90876 90877 90883
1474x4 1474x6 1474x8
1/4 3/8 1/2
— — —
10 10 1
Part No.
Cross Reference
Tube O.D.
Pipe Thread
Qty.
90890 90680 90681 90735 90683 90682 90684 90685 90687 90686 90688 90736 90690 90689 90737 90691 90692
1468x3x2 1468x4 1468x4x4 1468x4x6 1468x6x2 1468x6 1468x6x6 1468x6x8 1468x8x4 1468x8 1468x8x8 1468x8x12 1468x10x6 1468x10 1468x10x12 1468x12 1468x12x12
3/16 1/4 1/4 1/4 3/8 3/8 3/8 3/8 1/2 1/2 1/2 1/2 5/8 5/8 5/8 3/4 3/4
1/8 1/8 1/4 3/8 1/8 1/4 3/8 1/2 1/4 3/8 1/2 3/4 3/8 1/2 3/4 1/2 3/4
10 10 10 5 10 10 10 10 10 10 10 2 5 5 2 5 5
Part No.
Cross Reference
Tube O.D.
Pipe Thread
Qty.
90761 90762
— —
3/8 1/2
3/8 3/8
5 5
Part No.
Cross Reference
Tube O.D.
Pipe Thread
Qty.
90693 90694 90770 90697 90695 90699 90700 90703 90701 90704 90705 90706 90771 90707 90724
1469x4 1469x4x4 1469x4x6 1469x6x2 1469x6 1469x6x6 1469x6x8 1469x8x4 1469x8 1469x8x8 1469x10 1469x10x6 1469x10x12 1469x12 1469x12x12
1/4 1/4 1/4 3/8 3/8 3/8 3/8 1/2 1/2 1/2 5/8 5/8 5/8 3/4 3/4
1/8 1/4 3/8 1/8 1/4 3/8 1/2 1/4 3/8 1/2 1/2 3/8 3/4 1/2 3/4
10 10 5 10 10 10 10 10 10 10 5 5 1 2 2
Part No.
Cross Reference
Tube O.D.
Pipe Thread
Qty.
90696 90702
1469x6 1469x8
1/4 3/8
1/4 3/8
10 10
Part No.
Cross Reference
Tube O.D.
Pipe Thread
Qty.
90709-1 90710 90711 90712
1470x4x4 1470x6 1470x6x6 1470x8
1/4 3/8 3/8 1/2
1/4 1/4 3/8 3/8
5 5 5 5
1-800-553-8769 /
www.IMPERIALSUPPLIES.com
Air Brake (Dot approved)
Air brake Fittings for Air brake Tubing Compression Air Brake Fittings
45° Male Elbow
45° Male Swivel Connector
Male Run Tee
Male Branch tee
Bulkhead
Part No.
Cross Reference
Tube O.D.
Pipe Thread
Qty.
90729 90734 90730 90899 90731 90732 90901 90738 90829 90733 90898
1480x4 1480x4x4 1480x6 1480x6x2 1480x6x6 1480x8 — 1480x8x8 1480x10x6 1480x10 1480x12x8
1/4 1/4 3/8 3/8 3/8 1/2 1/2 1/2 5/8 5/8 3/4
1/8 1/4 1/4 1/8 3/8 3/8 1/4 1/2 3/8 1/2 1/2
10 10 10 10 10 10 5 5 10 5 1
Part No.
Cross Reference
Tube O.D.
Pipe Thread
Qty.
90763 90764
— —
3/8 1/2
3/8 3/8
5 5
Part No.
Cross Reference
O.D. Left
O.D. Center
Pipe Thread
Qty.
90713 90713-1 90715 90714 90716 90717 90897
1471x4 — 1471x6x4x4 1471x6 1471x6x6x6 1471x8 1471x8x8
1/4 1/4 3/8 3/8 3/8 1/2 1/2
1/4 1/4 1/4 3/8 3/8 1/2 1/2
1/8 1/4 1/4 1/4 3/8 3/8
5 5 5 5 5 5 5
Part No.
Cross Reference
O.D. Left
O.D. Right
Pipe Thread
Qty.
90719 90719-1 90720 90718 90718-4 90721 90723 90722 90903
1472x4 — 1472x6x6x2 1472x6 1472x6 1472x6x6x6 1472x8x4 1472x8 1472x8x6x6
1/4 1/4 3/8 3/8 3/8 3/8 1/2 1/2 3/8
1/4 1/4 3/8 3/8 3/8 3/8 1/2 1/2 1/2
1/8 1/4 1/8 1/4 1/4 3/8 1/4 3/8 3/8
5 5 5 5 50 5 5 5 5
Part No.
Cross Reference
Tube O.D.
Pipe Thread
Qty.
90797 90796
50009 50008
3/8 1/2
3/8 3/8
5 5
Turn to page F30 for a variety of Nylon Tubing in many sizes and colors.
Visit the Imperial website. www.imperialsupplies.com
National Distributor of Quality Maintenance Supplies Since 1958
G3
Air Brake (Dot approved)
Air brake Fittings for Air brake Tubing
Push-To-Connect air brake fittings (Brass)
Male Connector
Quick connect Bulkhead union
Female bulkhead union
Part No.
Cross Reference
Tube O.D.
91199 91198 91200 91201 91202 91203 91204
1862x2.5 1862x3 1862x4 1862x6 1862x8 1862x10 1862x12
5/32 3/16 1/4 3/8 1/2 5/8 3/4
Part No.
Cross Reference
Tube O.D.
Thread
Qty.
91215 91218 91219 91217 91216 91220 91221 91222 91263 91223 91224 91225 91226 91227 91228 91270 91271
–– 1868x2.5x1 1868x2.5 1868x3 1868x4x2 1868x4 1868x4x4 1868x4x6 1868x6x2 1868x6 1868x6x6 1868x6x8 1868x8x4 1868x8 1868x8x8 1868x10x6 1868x10
1/8 5/32 5/32 3/16 1/4 1/4 1/4 1/4 3/8 3/8 3/8 3/8 1/2 1/2 1/2 5/8 5/8
1/16 1/16 1/8 1/8 1/16 1/8 1/4 3/8 1/8 1/4 3/8 1/2 1/4 3/8 1/2 3/8 1/2
5 5 5 5 5 5 5 5 5 5 5 5 3 3 3 3 3
Part No.
Cross Reference
Tube O.D.
Thread
Qty.
91260 91261 91262
1874x4x4 1874x6x6 1874x8x8
1/4 3/8 1/2
9/16–24 3/4–16 7/8–14
2 2 2
Part No.
Cross Reference
Tube O.D.
Thread
Qty.
91264 91265 91266 91267
1873x4x4 1873x6x4 1873x6x6 1873x8x8
1/4 3/8 3/8 1/2
1/4 1/4 3/8 1/2
2 2 2 2
Thread
Qty.
— — — — — —
5 5 5 5 5 2 5
45° Rigid male elbow
AI
#200-1
L
E
V
RT M SO
T EN
Union
• Brass construction. Elbows and tees are forged brass. • Swivel elbow and tees for ease of orientation. • Pre-applied PTFE based pipe sealant on all male pipe threads. • Temperature range: -40° F to 200° F • Working pressure: 150 psi • Applicable standard: FMVSS 571.106 and SAE J 1131
A
• Quick connect—simply push tubing in, no tools or loose parts to handle in tight places. • Use on windows, door locks, mirrors, wipers, air operated seats, operating gauges, air horns, heater controls, gear shifts, fifth wheels and air brake connections. • Full flow design provides up to 60% more flow area than conventional fittings with internal tube supports.
AS
Brass PUSH To Connect AIR BRAKE FITTINGS
LAB
Part No.
Cross Reference
Tube O.D.
Thread
Qty.
91268 91247 91269 91244 91248 91245 91246
1880x4 1880x6x6 1880x6x8 1880x8 1880x8x8S 1880x10x6 1880x10
1/4 3/8 3/8 1/2 1/2 5/8 5/8
1/8 3/8 1/2 3/8 1/2 3/8 1/2
5 1 1 5 2 1 3
Part No.
Cross Reference
Tube O.D.
Thread
Qty.
91025 91026 91027
1829X4 1829X6 1829X8
1/4 3/8 1/2
— — —
5 5 5
Part No.
Cross Reference
Tube O.D.
Thread
Qty.
91301 91241 91243 91242 91396
1880x4S 1880x4x4S 1880x6x2S 1880x6S 1880x8S
1/4 1/4 3/8 3/8 1/2
1/8 1/4 1/8 1/4 3/8
3 3 3 3 5
Pressure Plug
45° Swivel Male elbow
See M28 for PTFE Tape and page L51 for Pipe Sealant with PTFE .
Push-to-connect Air brake release tool TUBE RELEASE KIT
• Designed to ease the removal of tubing from all push-to-connect fittings. • Manufactured of a sturdy engineering plastic. • Use with push in air brake fittings Part No.
Qty.
91190
1
G4
call
1-800-558-2808 /
fax
Use with Push-to-Connect Air Brake Fittings
1-800-553-8769 /
www.IMPERIALSUPPLIES.com
Air Brake (Dot approved)
Air brake Fittings for Air brake Tubing
Push-To-Connect air brake fittings (Brass)
Part No.
Cross Reference
Tube O.D.
Thread
Qty.
91205 91206 91207
1865x4 1865x6 1865x8
1/4 3/8 1/2
— — —
5 5 3
Part No.
Cross Reference
Tube O.D.
Thread
Qty.
91230 91231 91232 91249 91233 91234 91235 91236 91238
1869x4S 1869x4x4S 1869x4x6S 1869x6x2S 1869x6S 1869x6x6S 1869x8S 1869x8x8S 1869x10S
1/4 1/4 1/4 3/8 3/8 3/8 1/2 1/2 5/8
1/8 1/4 3/8 1/8 1/4 3/8 3/8 1/2 1/2
5 5 5 5 5 5 3 3 3
Part No.
Cross Reference
Tube O.D.
Thread
Qty.
91240 91229 91237 91239 91214
1869x2.5x1 1869x2.5 1869x3 1869x6x2 1869x6x6
5/32 5/32 3/16 3/8 3/8
1/16 1/8 1/8 1/8 3/8
5 5 5 5 5
Part No.
Cross Reference
Tube O.D.
Thread
Qty.
91209 91208
1870x4x4 1870x6x6
1/4 3/8
1/4 3/8
5 5
Part No.
Cross Reference
Tube O.D.
Thread
Qty.
91210 91211 91917 91212 91213
1864x4 1864x6 1864x1x4 1864x8 1864x10
1/4 3/8 3/8 x 1/4 1/2 5/8
— —
5 5 5 3 5
Part No.
Cross Reference
Tube O.D.
Thread
Qty.
91250 91251 91252 91253 91254
1871x4S 1871x4x4S 1871x6S 1871x6x6S 1871x8S
1/4 1/4 3/8 3/8 1/2
1/8 1/4 1/4 3/8 3/8
3 3 3 2 2
Swivel Male Branch tee
Part No.
Cross Reference
Tube O.D.
Thread
Qty.
91255 91256 91257 91258 91259
1872x4S 1872x4x4S 1872x6S 1872x6x6S 1872x8S
1/4 1/4 3/8 3/8 1/2
1/8 1/4 1/4 3/8 3/8
5 5 3 2 2
Female branch tee
Part No.
Cross Reference
Tube O.D.
Thread
Qty.
91274
1877x6
3/8
1/4
5
Part No.
Cross Reference
Tube O.D.
Thread
Qty.
91470
68PMT-4-M12
1/4
M12-1.50
5
90° Union Elbow
90° Swivel male elbow
90° Male Elbow
90° Female elbow
Union Tee
Swivel male run tee
Metric Male Connector
— —
National Distributor of Quality Maintenance Supplies Since 1958
G5
Air Brake (Dot approved)
Air brake Fittings for Air brake Tubing
Push-To-Connect air brake fittings (Composite) QWIK-FIT™ Push to Connect Air Brake Fittings
Union
Straight male connector
Male elbow
Male branch tee
AI
#357-1
L
E
AS
A
V
RT M SO
T EN
• QWIK-FIT™ connections reduce installation time and cost. • Composite body provides outstanding chemical resistance. • Pipe threads are pre-sealed. *Does not meet DOT or SAE specifications for air brake applications
LAB
Part No.
Cross Reference
Tube O.D.
Pipe Thread
Qty.
98700 98701 98702 98703 98704
12-95055 12-95033 12-95044 12-95066 12-95088
5/32 3/16 1/4 3/8 1/2
— — — — —
5 5 5 5 5
Part No.
Cross Reference
Tube O.D.
Pipe Thread
Qty.
98707 * 98708 * 98710 * 98711 98712 98713 98714 98718 98719 98720 98721 98725 98726 98723
12-93052 12-93054 12-93032 12-93034 12-93042 12-93044 12-93046 12-93062 12-93064 12-93066 12-93068 12-93084 12-93086 12-93088
5/32 5/32 3/16 3/16 1/4 1/4 1/4 3/8 3/8 3/8 3/8 1/2 1/2 1/2
1/8 1/4 1/8 1/4 1/8 1/4 3/8 1/8 1/4 3/8 1/2 1/4 3/8 1/2
5 5 5 5 5 5 5 5 5 5 5 5 5 5
Part No.
Cross Reference
Tube O.D.
Pipe Thread
Qty.
98737 98738 98739 98740 98741 98744 98745 98746 98749 98750 98751
12-93052 12-93032 12-93042 12-93044 12-93046 12-93064 12-93066 12-93068 12-93084 12-93086 12-93088
5/32 3/16 1/4 1/4 1/4 3/8 3/8 3/8 1/2 1/2 1/2
1/8 1/8 1/8 1/4 3/8 1/4 3/8 1/2 1/4 3/8 1/2
5 5 5 5 5 5 5 5 5 5 5
Part No.
Cross Reference
Tube O.D.
Pipe Thread
Qty.
98766 98765 98767 98768 98770
12-97444 12-97446 12-97664 12-97666 12-97888
1/4 1/4 3/8 3/8 1/2
1/4 3/8 1/4 3/8 1/2
5 5 5 5 5
Push-to-connect Air brake release tool TUBE RELEASE KIT
• Designed to ease the removal of tubing from all push-to-connect fittings. • Manufactured of a sturdy engineering plastic. • Use with push in air brake fittings Part No.
Qty.
91190
1
G6
call
1-800-558-2808 /
fax
Use with Push-to-Connect Air Brake Fittings
1-800-553-8769 /
www.IMPERIALSUPPLIES.com
Air Brake (Dot approved)
Air brake Fittings for Air brake Tubing
Push-To-Connect air brake fittings (Composite)
Part No.
Cross Reference
Tube O.D.
Pipe Thread
Qty.
98772 98773 98774 98776 98777
12-99042 12-99044 12-99064 12-99066 12-99068
1/4 1/4 3/8 3/8 3/8
1/8 1/4 1/4 3/8 1/2
5 5 5 5 5
Part No.
Cross Reference
Tube O.D.
Pipe Thread
Qty.
98731 98732
12-90044 12-90066
1/4 3/8
— —
5 5
Part No.
Cross Reference
Tube O.D.
Pipe Thread
Qty.
98780 98782 98783 98784
12-96555 12-96444 12-96666 12-96888
5/32 1/4 3/8 1/2
— — — —
5 5 5 5
Union elbow
Part No.
Cross Reference
Tube O.D.
Pipe Thread
Qty.
98788 98789 98790 98791 98792
12-91055 12-91033 12-91044 12-91066 12-91088
5/32 3/16 1/4 3/8 1/2
— — — — —
5 5 5 5 5
Female Connector
Part No.
Cross Reference
Tube O.D.
Pipe Thread
98795 98796
12-88042 12-88044
1/4 x 1/8 1/4 x 1/4
Part No.
Cross Reference
Tube O.D.
Pipe Thread
Qty.
98754 98755 98756
12-96055 12-96044 12-96066
5/32 1/4 3/8
— — —
5 5 5
Part No.
Cross Reference
Tube O.D.
Pipe Thread
Qty.
98760 98761
12-89042 12-89044
1/4 1/4
1/8 1/4
5 5
Part No.
Cross Reference
Tube O.D.
Pipe Thread
Qty.
91860
379PTC-10-6
5/8
3/8
5
Male Run Tee
Bulkhead union
Union Tee
Y Union
Y Connector
45° Elbow tube To Pipe
Qty. 5 5
National Distributor of Quality Maintenance Supplies Since 1958
G7
Air Brake Air brake tubing DOT AIR BRAKE TUBING
• Superior cold weather flexibility and abrasion resistance • UV and ozone resistant. • Meets or exceeds SAEJ844. • Meets or exceeds DOT requirements for use with compression fittings. • Identified per SAE J844 and FMVSS No. 106 Brake Hoses, 49 CFR 571.106. • Conforms to our own rigorous qualification and inspection testing which exceeds SAE and DOT requirements. • Designed to operate at up to 150 psi in air brake systems. • Resistant to attack by gasoline, diesel fuel and commonly used road and cleaning chemicals. • Temperature Range: -40° F to 200° F Color
Part No.
Tube O.D. Tube I.D.
Wall Thickness
Black Black Black Black Black Black Black Black Red Red Red Red Red Red Red Green Green Green Green Green Green Yellow Yellow Yellow Blue Blue Blue Blue Blue Blue Blue Orange White
90924 90925 90925-4 90926 90926-4 90927 90928 90930 90932 90933 90933-4 90937 90937-4 90934 90856 90938 90938 90939 90939-4 90826 90918 90834-4 90835 90919 90935 90936 90936-4 90941 90942 90942-4 90941 90945 90854
1/4 3/8 3/8 1/2 1/2 5/8 3/4 5/16 1/4 3/8 3/8 1/2 1/2 5/8 3/4 1/4 1/4 3/8 3/8 5/8 5/8 3/8 1/2 1/2 1/4 3/8 3/8 1/2 1/2 1/2 1/2 3/8 3/8
.040 .062 .062 .062 .062 .092 .092 .040 .040 .062 .062 .062 .062 .092 .092 .040 .040 .062 .062 .092 .092 .062 .062 .062 .040 .062 .062 .062 .062 .062 .605 .062 .062
.170 .251 .251 .376 .376 .441 .566 .233 .170 .251 .251 .376 .376 .441 .170 .251 .251 .170 .441 .251 .376 .170 .251 .251 .376 .376 .376 .251
Maximum Working Pressure
Minimum Burst Pressure
Minimum Bend Radius
Feet
150 psi 150 psi 150 psi 150 psi 150 psi 150 psi 150 psi 150 psi 150 psi 150 psi 150 psi 150 psi 150 psi 150 psi 150 psi 150 psi 150 psi 150 psi 150 psi 150 psi 150 psi 150 psi 150 psi 150 psi 150 psi 150 psi 150 psi 150 psi 150 psi 150 psi 150 psi 150 psi 150 psi
1,200 psi 1,400 psi 1,400 psi 950 psi 950 psi 900 psi 800 psi 1000 psi 1,200 psi 1,400 psi 1,400 psi 950 psi 950 psi 900 psi 800 psi 1,200 psi 1,200 psi 1,400 psi 1,400 psi 900 psi 900 psi 1,400 psi 950 psi 950 psi 1,200 psi 1,400 psi 1,400 psi 950 psi 950 psi 950 psi 950 psi 1,400 psi 1,400 psi
1" 1-1/2 1-1/2 1/2 2" 2-1/2 3" 1-1/4 1" 1-1/2 1-1/2 2" 2" 2-1/2 3" 1" 1" 1-1/2 1-1/2 2-1/2 2-1/2 1-1/2 2" 2" 1" 1-1/2 1-1/2 2" 2" 2" 2" 1-1/2 1-1/2
100 100 500 100 500 100 100 100 100 100 500 100 500 100 100 100 100 100 500 100 100 500 100 100 100 100 500 100 100 250 100 100 100
Multi-Cutter, page H9, works great for cutting Nylon Tubing.
Melinda Customer Service
Devoted… “It’s not just finding the right part. It’s keeping a shop going. You’ve got to know that and care about it.”
G8
call
1-800-558-2808 /
fax
For technical product charts and other Imperial literature, visit imperialsupplies.com and click the 'resources tab' at the top of the webpage.
1-800-553-8769 /
www.IMPERIALSUPPLIES.com
Air Brake Air brake tubing Non-DOT AIR BRAKE TUBING
• Superior cold weather flexibility and abrasion resistance • UV and ozone resistant. • Meets or exceeds SAEJ844. • Identified per SAE J844 and FMVSS No. 106 Brake Hoses, 49 CFR 571.106. • Conforms to our own rigorous qualification and inspection testing which exceeds SAE and DOT requirements. • Designed to operate at up to 150 psi in air brake systems. • Resistant to attack by gasoline, diesel fuel and commonly used road and cleaning chemicals. • Temperature Range: -40° F to 200° F Color
Part No.
Tube O.D. Tube I.D.
Wall Thickness
Black Black Black
90915 90923 90916
1/8 5/32 3/16
.023 .032 .035
.079 .032 .118
Maximum Working Pressure
Minimum Burst Pressure
Minimum Bend Radius
Feet
150 psi 150 psi 150 psi
1,000 psi 1,000 psi 1,000 psi
3/8 1" 1"
100 100 100
The Imperial Experts know fleet maintenance products. Watch our product videos on YouTube. Scan QR code using your smart phone. In your web browser enter: http://isuppli.es/imperial-experts
National Distributor of Quality Maintenance Supplies Since 1958
G9
Air Brake (Dot approved)
air brake fittings for copper tubing Compression Fittings
RT M SO
T EN
AI
#191-1
Tube O.D. Thread Size
BL
E
V
A
• Use with copper tubing in air brake systems air control, and gauge lines. These fittings may also be used with nylon air brake tubing by replacing long nut and spherical sleeve with insert, rigid sleeve and nut on page G1. • Exceeds DOT pressure requirements for air brake systems. • Meets SAE, DOT standards and MIL specifications. • Fair resistance to vibration. • Temperature range: -65° F to 250° F • To assemble, turn 1-3/4 turns past hand tight for 1/4" and 3/8" size and 3-1/4 turns for 1/2", 3/8" and 3/4" sizes.
AS
Dot Air Brake Fittings For Copper Tubing
LA
Sleeve
Nut
Union tee
Union
UNION Elbow
1/4 7/16–24
3/8 1/2 5/8 3/4 17/32–24 11/16–20 13/16–18 1"–18
Part No.
Cross Reference
Tube O.D.
Pipe Thread
Qty.
90401 90403 90404 90405 90406
1360x4 1360x6 1360x8 1360x10 1360x12
1/4 3/8 1/2 5/8 3/4
— — — — —
50 50 50 20 20
Part No.
Cross Reference
Tube O.D.
Pipe Thread
Qty.
90408 90410 90411 90412 90413
1361x4 1361x6 1361x8 1361x10 1361x12
1/4 3/8 1/2 5/8 3/4
— — — — —
20 20 20 10 10
Part No.
Cross Reference
Tube O.D.
Pipe Thread
Qty.
90426 90428
1364x6 1364x8
3/8 1/2
— —
10 10
Part No.
Cross Reference
Tube O.D.
Pipe Thread
Qty.
90416 90418 90419 90420 90421
1362x4 1362x6 1362x8 1362x10 1362x12
1/4 3/8 1/2 5/8 3/4
— — — — —
10 10 10 6 6
Part No.
Cross Reference
Tube O.D.
Pipe Thread
Qty.
90433
1365x8
1/2
—
5
Copper tubing COPPER TUBING
• Seamless. Bright annealed. • Meets all federal and ICC standards. • Engineered for most applications, including refrigeration. Standard
Heavy-duty
Part No.
O.D.
Wall Gauge
75010 75011 75012 75002 75013 75014 75015 75016
1/8 3/16 1/4 1/4 5/16 3/8 1/2 5/8
.030" .030" .030" .030" .032" .032" .032" .035"
G10
call
Feet
Part No.
O.D.
Wall Gauge
Feet
25 25' 25' 50' 25' 25' 25' 25'
75018 75020 75021
1/4 3/8 1/2
.035" .049" .049"
50' 50' 50'
1-800-558-2808 /
fax
1-800-553-8769 /
www.IMPERIALSUPPLIES.com
Air Brake (Dot approved)
air brake fittings for copper tubing Compression Fittings
Female connector
Male Connector
90° Male Elbow
45° male Elbow
90° Female Elbow
Male Run tee
Male branch tee
Part No.
Cross Reference
Tube O.D.
Pipe Thread
Qty.
90440 90441 90442
1366x6 1366x6x6 1366x8
3/8 3/8 1/2
1/4 3/8 3/8
5 5 5
Part No.
Cross Reference
Tube O.D.
Pipe Thread
Qty.
90446 90447 90449 90450 90451 90452 90453 90454 90455 90456 90457 90458 90459
1368x4 1368x4x4 1368x6x2 1368x6 1368x6x6 1368x6x8 1368x8x4 1368x8 1368x8x8 1368x10x6 1368x10 1368x12 1368x12x12
1/4 1/4 3/8 3/8 3/8 3/8 1/2 1/2 1/2 5/8 5/8 3/4 3/4
1/8 1/4 1/8 1/4 3/8 1/2 1/4 3/8 1/2 3/8 1/2 1/2 3/4
10 10 10 10 10 10 10 10 10 6 6 6 6
Part No.
Cross Reference
Tube O.D.
Pipe Thread
Qty.
90461 90462 90464 90465 90466 90467 90468 90469 90470 90471 90471-1
1369x4 1369x4x4 1369x6x2 1369x6 1369x6x6 1369x6x8 1369x8x4 1369x8 1369x8x8 1369x10 1369x10x6
1/4 1/4 3/8 3/8 3/8 3/8 1/2 1/2 1/2 5/8 5/8
1/8 1/4 1/8 1/4 3/8 1/2 1/4 3/8 1/2 1/2 3/8
10 10 10 10 10 10 10 10 10 6 6
Part No.
Cross Reference
Tube O.D.
Pipe Thread
Qty.
90551 90552 90553 90554
1380x6 1380x6x6 1380x8 1380x10
3/8 3/8 1/2 5/8
1/4 3/8 1/2 5/8
10 5 5 5
Part No.
Cross Reference
Tube O.D.
Pipe Thread
Qty.
90478
1370x6
3/8
1/4
5
Part No.
Cross Reference
Tube O.D.
Pipe Thread
Qty.
90483 90484
1371x6x6x6 1371x6
3/8 x 3/8 3/8 x 3/8
3/8 1/4
5 5
Part No.
Cross Reference
Tube O.D.
Pipe Thread
Qty.
90489 90490 90491 90492
1372x6x6x2 1372x6 1372x6x6x6 1372x8
3/8 x 3/8 3/8 x 3/8 3/8 x 3/8 1/2 x 1/2
1/8 1/4 3/8 3/8
5 5 5 5
Connect With Imperial Supplies
G11
Air Brake (Dot approved) Rubber air brake hose
Construction: »»Inner tube: Synthetic EPDM »»Reinforcement: Multi-fiber braid »»Cover: Synthetic EPDM
RUBBER AIR BRAKE HOSE
• Premium quality air brake hose. • Temperature range: -40° F to 200° F • Meets or exceeds SAE J1402 A DOT AII. • Pennsylvania state approved. Part No.
Cross Reference
Hose I.D.
90500 90500-1 90500-4 90505 90505-1
H33806 H33806 H33806 H33808 H33808
3/8 3/8 3/8 1/2 1/2
Hose O.D.
Maximum Working Pressure
Proof Test Pressure
Minimum Burst Pressure
Minimum Bend Radius
Feet
3/4 3/4 3/4 7/8 7/8
225 psi 225 psi 225 psi 225 psi 225 psi
200 psi 200 psi 200 psi 200 psi 200 psi
900 psi 900 psi 900 psi 900 psi 900 psi
3-1/2 3-1/2 3-1/2 4" 4"
100' 250' 500' 50' 250'
(Dot approved)
Air brake Fittings for Rubber hose Compression Fittings
NUT for hose connector
Hose connector sleeve
Hose connector
G12
call
1-800-558-2808 /
fax
A
Nut for spring guard
V
AI
#230-1
BL
E
AS
• Can be used for nearly any air brake system line. • Easy to assemble with a good selection of low cost hose end configurations. • Brass material offers excellent resistance against corrosion. • Exceeds pressure requirements of all truck air brake systems. Actual pressure is determined by maximum working pressure of hose size.
RT M SO
T EN
HOSE ENDS FOR RUBBER AIR BRAKE HOSE
LA
Part No.
Cross Reference
Hose Size
Male Pipe Thread
Qty.
90517-1 90619
33806D 33808D
3/8 1/2
— —
5 5
Part No.
Cross Reference
Hose Size
Male Pipe Thread
Qty.
90510 90610
33806B 33808B
3/8 1/2
— —
10 10
Part No.
Cross Reference
Hose Size
Male Pipe Thread
Qty.
90511 90611
33806A 33808A
3/8 1/2
— —
20 20
Part No.
Cross Reference
Hose Size
Male Pipe Thread
Qty.
90512 90513 90514 90613 90614
33806B-Y24 33806B-Y26 33806B-Y28 33808B-Y26 33808B-Y28
3/8 3/8 3/8 1/2 1/2
1/4 3/8 1/2 3/8 1/2
5 5 5 5 5
1-800-553-8769 /
www.IMPERIALSUPPLIES.com
Air Brake (Dot approved)
Air brake Fittings for Rubber hose Compression Fittings
Hose connector with spring guard
Part No.
Cross Reference
Hose Size
Male Pipe Thread
Qty.
90515 90516 90517 90616 90617
33806B-Y34 33806B-Y36 33806B-Y38 33808B-Y36 33808B-Y38
3/8 3/8 3/8 1/2 1/2
1/4 3/8 1/2 3/8 1/2
5 5 5 5 5
Part No.
Cross Reference
Hose Size
Male Pipe Thread
Qty.
Insert
90522 90523 90524 90623 90624
1391x6 1391x6x6 1391x6x8 1391x8 1391x8x8
3/8 3/8 3/8 1/2 1/2
1/4 3/8 1/2 3/8 1/2
5 5 5 5 5
Spring / nut assembly
Part No.
Cross Reference
Hose Size
Male Pipe Thread
Qty.
90584
—
3/8
—
5
SPRING guard
Hose connector with adapter
Adapter
Hose Mender
FEMALE swivel
Part No.
Cross Reference
Hose Size
Male Pipe Thread
Qty.
90518 90618
33806-C 33808-C
3/8 1/2
— —
5 10
Part No.
Cross Reference
Hose Size
Male Pipe Thread
Qty.
90521 90488 90493
33806B-Y84 33806B-Y86 33808B-Y86
3/8 3/8 1/2
1/4 3/8 3/8
5 5 2
Part No.
Cross Reference
Pipe Size
ABS Thread
Qty.
90520 90508 90504 90506 90507
1390x6 1390x6x6 1390x6x8 1390x8 1390x8x8
1/4 3/8 1/2 3/8 1/2
3/4–20 3/4–20 3/4–20 7/8–20 7/8–20
5 5 5 5 5
Part No.
Cross Reference
Hose Size
Male Pipe Thread
Qty.
90438 90638
33806B-Y06 33808B-Y08
3/8 1/2
— —
5 5
Part No.
Cross Reference
Hose Size
ABS Thread
Qty.
90519 90496
33806B-Y76 33808B-Y78
3/8 1/2
3/4–20 7/8–20
5 2
National Distributor of Quality Maintenance Supplies Since 1958
G13
Air Brake (Dot approved) Air brake Fittings for Rubber hose Crimp style fittings Rubber Air Brake 338 Series Crimp Hose Ends
• Brass material offers excellent resistance against corrosion. • A permanent hose end saves time and is easy to assemble. • NOTE: Use special collets—Part No. 3117 for 3/8" I.D. and No. 3118 for 1/2" I.D.
Male pipe rigid
Male pipe swivel
Part No.
Cross Reference
Hose I. D.
Pipe Size
Thread Size
Qty.
92680 92681 92682 92683 92684
33806P-104 33806P-106 33806P-108 33808P-106 33808P-108
3/8 3/8 3/8 1/2 1/2
1/4 3/8 1/2 3/8 1/2
1/4 – 18 3/8 – 18 1/2 – 14 3/8 – 18 1/2 – 14
5 5 5 5 5
Part No.
Cross Reference
Hose I. D.
Pipe Size
Thread Size
Qty.
92685
33806P-J06
3/8
3/8
3/8 – 18
5
(Swivel for installation purposes only)
Female swivel
SAE 45° Female swivel
Air Brake Slide Line
Part No.
Cross Reference
Hose I. D.
ABS Size
Thread Size
Qty.
92686 92687 92688
33806P-Y76 33808P-Y76 33808P-Y78
3/8 1/2 1/2
3/8 3/8 1/2
3/4–20 3/4–20 7/8–20
5 5 5
Part No.
Cross Reference
Hose I. D.
Tube Size
Thread Size
Qty.
92690
33808P-408
1/2
1/2
3/4–16
5
Part No.
Cross Reference
Hose I. D.
Tube Size
Thread Size
Qty.
92675
33806P-Y66
3/8
3/8
17/32–24
2
(Dot approved) Rubber air brake hose Construction: »»Inner tube: Synthetic EPDM »»Reinforcement: Multi-fiber braid »»Cover: Synthetic EPDM
RUBBER AIR BRAKE HOSE
• Premium quality air brake hose. • Temperature range: -40° F to 200° F • Meets or exceeds SAE J1402 A DOT AII. • Pennsylvania state approved. Part No.
Cross Reference
Hose I.D.
90500 90500-1 90500-4 90505 90505-1
H33806 H33806 H33806 H33808 H33808
3/8 3/8 3/8 1/2 1/2
G14
call
Hose O.D.
Maximum Working Pressure
Proof Test Pressure
Minimum Burst Pressure
Minimum Bend Radius
Feet
3/4 3/4 3/4 7/8 7/8
225 psi 225 psi 225 psi 225 psi 225 psi
200 psi 200 psi 200 psi 200 psi 200 psi
900 psi 900 psi 900 psi 900 psi 900 psi
3-1/2 3-1/2 3-1/2 4" 4"
100' 250' 500' 50' 250'
1-800-558-2808 /
fax
1-800-553-8769 /
www.IMPERIALSUPPLIES.com
Air Brake (Dot approved) Air brake Fittings for Rubber hose F i e l d i n s ta l l at i o n f i t t i n g s Field installation air brake ends
• Install air brake hose ends with the use of only a hex key. • Repair air brake hoses, eliminating costly service calls and down time. • Full DOT approval for use on air brake systems. • Complete instructions included with each set. • Male swivel hose ends. Part No.
Hose I.D.
Male Pipe Thread
Qty.
90842 90509 90509-4 90609
3/8 3/8 3/8 3/8
1/4 3/8 3/8 1/2
2 2 10 2
Field installation air brake ends
• Bench mount tool required for installation for 1/2" hose size. • Repair air brake hoses, eliminating costly service calls and down time. • Full DOT approval for use on air brake systems. • Complete instructions included with each set. • Male swivel hose ends. Part No.
Hose I.D.
Male Pipe Thread
Qty.
90905 90906
1/2 1/2
3/8 1/2
2 2
A i r b r a k e a cc e s s o r i e s Heavy-duty adjustable air tank drain valve
Heavy-duty air tank drain valve
• All brass body with stainless steel spring. • Steel cable with nylon coating, certified to 200 lb pull test. • Low profile to minimize accidental hits and damages. • Minimal fluid retention to reduce effect of freezing.
Part No.
Description
Qty.
90599 90597 90596
Drain Valve with 64" Cable and Crimp Ferrule Crimp Ferrule 64" Cable
4 25 10
AIR TANK DRAIN VALVES
• Conveniently drains air brake systems with a simple pull. • Solid brass bleeder valve with remote cable screws into existing air systems.
• All brass body with stainless steel spring. • Steel cable with nylon coating. Part No.
Male Pipe Thread
Cable Length
Qty.
790537
1/4
60"
4
External seat drain cock
• Temperature Range: -65° F to 250° F. Part No.
Pipe Male
Cross Reference
Qty.
90540 90540-2 90541 90541-2 90542 90544
1/8 1/8 1/4 1/4 3/8 1/2
135 135 145 145 270 108
20 10 20 10 10 5
Drain cock
• Temperature Range: -65° F to 250° F. Part No.
Male Pipe Thread
Cable Length
Qty.
90607 90608 90595
1/4 1/4 1/4
2' 4' 5'
4 4 4
Part No.
Pipe Male
Cross Reference
Qty.
90591
1/4
DCR601-4
5
Air Brake Diaphragms
See F34 for more Drain Cocks.
• Popular 8" size. • Clamp ring style. Part No.
Size
Type
Qty.
90605 90605-4
7-59/64 7-59/64
30 30
2 10
National Distributor of Quality Maintenance Supplies Since 1958
G15
Air Brake ( NO t D o t a p p r o v e d )
F i t t i n g s f o r t r a n s m i s s i o n AIR LINES Compression Fittings
Replacement Compression fittings
• Primary applications: air control systems, instrumentation, water, air and lubrication lines • Excellent vibration characteristics depend upon use of tubing. • All fittings have split sleeves. • Temperature range: -65° F to 250° F
Nut
Sleeve
Union
Male Connector
Male elbow
Part No.
Cross Reference
Tube O.D.
Pipe Size
Qty.
90885 90790
281x2 1461x532
1/8 5/32
— —
10 10
Part No.
Cross Reference
Tube O.D.
Pipe Size
Qty.
90940 90791
280x2 1460x532
1/8 5/32
— —
50 25
Part No.
Cross Reference
Tube O.D.
Pipe Size
Qty.
90891 90792
283x2 1462x532
1/8 5/32
— —
5 5
Part No.
Cross Reference
Tube O.D.
Pipe Size
Qty.
90908 90907 90793 90794
282x2x1 282x2 1468x532x1 1468x532x2
1/8 1/8 5/32 5/32
1/16 1/8 1/16 1/8
5 5 5 5
Part No.
Cross Reference
Tube O.D.
Pipe Size
Qty.
90922 90921 90795
284x2x1 284x2 1469x532x2
1/8 1/8 5/32
1/16 1/8 1/8
5 5 5
Push-to-connect fittings (Composite) Push-to-connect fittings
• Nickel-plated brass with pre-applied sealant on the threads. • Use with compressed air. • Maximum working pressure: 260 psi
Male run tee
Male branch tee
G16
call
1-800-558-2808 /
fax
Part No.
Cross Reference
Tube O.D.
Pipe Size
Qty.
91540
31035311
1/8
1/8
10
Part No.
Cross Reference
Tube O.D.
Pipe Size
Qty.
91545
31085311
1/8
1/8
10
1-800-553-8769 /
www.IMPERIALSUPPLIES.com
Air Brake ( NOT D o t a p p r o v e d )
F i t t i n g s f o r t r a n s m i s s i o n AIR LINES
Push-to-connect fittings Push-to-connect fittings
• Use with polyethylene/nylon and polyurethane (90 durometer and over) and soft metal tubing. • Suitable for low temperature vacuum service. • Temperature range: -40° F to 230° F
Union
Part No.
Cross Reference
Tube O.D.
Pipe Size
Qty.
91500 91504
62PLN-2 62PLN-5
1/8 5/16
— ––
5 5
Union Elbow
Part No.
Cross Reference
Tube O.D.
Pipe Thread
Qty.
91511
165PLN-2
1/8
—
5
Union Tee
Part No.
Cross Reference
Tube O.D.
Pipe Thread
Qty.
91505
164PLN-2
1/8
—
5
Male Elbow
Male Connector
Male Elbow Swivel
Female elbow
Part No.
Cross Reference
Tube O.D.
Pipe Thread
Qty.
91531 91532
W169PLN-2-2 31295314
1/8 1/8
1/8 1/4
5 10
Part No.
Cross Reference
Tube O.D.
Pipe Thread
Qty.
91517 91517-4 91518 91520 91521
W68PLN-2-2 W68PLN-2-2 31755314 W68PLP-5-2 31750814
1/8 1/8 1/8 5/16 5/16
1/8 1/8 1/4 1/8 1/4
5 1000 5 5 5
Part No.
Cross Reference
Tube O.D.
Pipe Thread
Qty.
91531-1
W169PLN-2-2
1/8
1/8
5
Part No.
Cross Reference
Tube O.D.
Pipe Thread
Qty.
91533
370GC-5/32-2
5/32
1/8
5
A Reducer
B
Part No.
Cross Reference
Tube O.D. (a)
Tube O.D. (b)
Qty.
91541
1109 x 2.5 x 4
5/32
1/4
5
National Distributor of Quality Maintenance Supplies Since 1958
G17
Air Brake Air brake Assemblies Coiled air brake assemblies Phillips® Polar Air® Coiled Air Assemblies
• Features POWER GRIP™ glad hand extensions for superior coupling and uncoupling leverage. • Excellent recoil memory chemical and abrasion resistance. • Large coil diameter prevents kinking, provides great recoil. • Jacketing prevents fractures, provides durable, rubber feel. • Remains flexible at -85° F. • Three-Year Warranty. • Meets SAE J844 and J1131 specifications. • Meets FMVSS 571.106 specifications. • Meets DOT 49 CFR 393.45 specifications. Part No.
Description
Length
Qty.
90819 90819-1 90819-2 90820 90820-1 90820-2
Air Brake Hose Set Red – Emergency Blue – Service Air Brake Hose Set Red – Emergency Blue – Service
15' with 12" lead 15' with 12" lead 15' with 12" lead 15' with 40" lead 15' with 40" lead 15' with 40" lead
1 1 1 1 1 1
COILED AIR BRAKE TUBING ASSEMBLIES
COILED NYLON AIR BRAKE TUBING ASSEMBLIES
• Resists road salt, gasoline, oil, deterioration, aging, heat, light, and abrasion. • Meets or exceeds DOT requirement FMVSS #106 and SAE J844D. • Temperature range: -40° F to 200° F • Connection: tractor to trailer Part No.
Description
Maximum Working Length
90810 90810-1 90810-2
1 Red, 1 Blue 1 Red 1 Blue
15' 15' 15'
• Resists road salt, gasoline, oil, deterioration, aging, heat, light and abrasion. • Meets or exceeds DOT requirement FMVSS #106 and SAE J844D. • Temperature range: -40° F to 200° F • Connection: tractor to trailer Tractor End Length
Trailer End Length
Pipe Thread Qty.
Part No.
12" 12" 12"
12" 12" 12"
1/2 1/2 1/2
90857 90857-1 90857-2
1 Pair 1 Coil 1 Coil
Description
Maximum Working Length
Tractor End Length
Trailer End Length
Pipe Thread Qty.
1 Red, 1 Blue 1 Red 1 Blue
15' 15' 15'
48" 48" 48"
12" 12" 12"
1/2 1/2 1/2
1 Pair 1 Coil 1 Coil
Find Fittings for Nylon Tubing on pages G16 – G17.
Matt Graphic Designer
Customer satisfaction… “Our customers are always pleasantly surprised. We work hard to exceed customer’s expectations.”
G18
call
1-800-558-2808 /
fax
1-800-553-8769 /
www.IMPERIALSUPPLIES.com
Air Brake Air brake Assemblies Straight air brake assemblies Single swivel Air brake hose assemblies
Double swivel Air brake hose assemblies
• Meets or exceeds DOT FMVSS No. 106 - Brake Hoses, 49CFR571.106. • Meets or exceeds SAE J1402 - Type A. • UV and ozone resistant. • Operating Temperature: -40° F to 200° F • One 3/8" swivel adapter is included with single swivel assembly. • Use with Hose Assembly Rack, Part No. 261, in Section O. • To convert one end of hose to 1/4" pipe, use Rubber Air Brake Adapter, Part No. 90520. • 3/8" pipe adapter included. • 100% factory tested to ensure maximum quality.
• Meets or exceeds DOT FMVSS No. 106 - Brake Hoses, 49CFR571.106. • Meets or exceeds SAE J1402 - Type A. • UV and ozone resistant. • Operating temperature: -40° F to 200° F • Both ends swivel. • Use with Hose Assembly Rack, Part No. 261, in Section O.
Part No.
Hose I.D.
Hose Length
Swivel End
Fixed End
Pipe Adapter Included
Qty.
91272 91273 91275 91286 91276 91277 91278 91279 91280 91281 91285 91282 91283 91284 91289 91290 91292 91293 91294 91295 91297 91298 91299 91336
3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2
18" 20" 24" 24" 28" 30" 32" 34" 36" 42" 44" 48" 60" 72" 18" 20" 24" 28" 30" 32" 36" 42" 48" 60"
3/8 3/8 3/8 1/4 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8
3/8 3/8 3/8 1/4 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8
3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8
2 2 2 1 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2
Think safety first. Always. Imperial offers a wide range of Safety Products.
Part No.
Hose I.D.
Hose Length
Swivel Thread
Swivel Thread
Qty.
91492 91493 91496 91497 91498 91499
1/2 1/2 1/2 1/2 1/2 1/2
24" 28" 36" 42" 48" 60"
3/8 3/8 3/8 3/8 3/8 3/8
3/8 3/8 3/8 3/8 3/8 3/8
2 2 2 2 2 2
STRAIGHT AIR BRAKE ASSEMBLY
• Includes hose connectors with spring guards. • Used for tractor to trailer hook ups, connected to glad hands. • Rubber hose. • DOT approved. Part No.
Hose
Male Pipe Thread
Length
Qty.
90757 90774
3/8 3/8
1/2 1/2
12" 15"
1 1
AIR BRAKE HOSE ASSEMBLY WITH SPRINGS
• Meets or exceeds DOT FMVSS No. 106 - Brake Hoses, 49CFR571.106. • Meets or exceeds SAE J1402 - Type A. • UV and ozone resistant. • Operating temperature: -40° F to 200° F • Both ends are fixed. • Threaded fixed end 1/2 with spring reinforced ends. Part No.
Hose I.D.
Fixed End
Hose Length
Qty.
91502
1/2
1/2
31"
1
5th wheel air line 5Th Wheel Nylon Air Line
• Coiled nylon hose. • Extends up to 10’. • Spring guards included. Part No.
Hose O.D.
NPTF Fittings
Coil Length
Qty.
90773 90627
1/4 1/4
1/4-14 1/4-14
54' 60'
1 1
National Distributor of Quality Maintenance Supplies Since 1958
G19
Air Brake Air brake Assemblies A i r b r a k e A s s e m b ly a cc e s s o r i e s TENDER SPRING with COVER AND HARDWARE
• Hardware includes: Heavy duty black nylon cover • Use with (2) 3/8" air brake hoses and (1) 7 way ABS cord. • Includes a carabiner. • Spring Size: 1" x 20" Part No.
Cross Reference
Length
Description
Qty.
90866 90866-4
17-1487 17-1487
20" 20"
Tender Spring with CVR-No Holder Tender Spring with CVR-No Holder
1 5
Note: Order holders 90859, 90776 and 90860 separately, see G21.
PHILLIPS® TENDER SPRING with COVER AND HARDWARE
• Heavy-duty black nylon cover and hose clamp. • Use with two 3/8" air brake hoses and one 7-way ABS cord. • Includes a carabiner. • Spring size: 1" x 20" Part No.
Cross Reference
Length
Description
Qty.
90861 90861-4 90864
17-148 17-148 17-160
20" 20" —
Tender Spring with Cover Tender Spring with Cover Snap On Clip Replacement
1 5 10
PHILLIPS® TRACKER BAR DUAL SPRING KIT
• Dual 16" springs. • Includes 3 ring clip. Part No.
Cross Reference
Length
Description
Qty.
90887
17-420
16"
Duel Tender Spring with Holder
1
TENDER SPRING with COVER AND HARDWARE
• Heavy-duty cover and 3-hose clamp. • Use with two 3/8" air brake hoses and one 7-way ABS cord. • Includes a carabiner. • Spring size: 1" x 20" Part No.
Cross Reference
Length
Description
Qty.
90865
17-1487
20"
Tender Spring with Cover
1
TENDER SPRING COVER
• Cover for tender springs. • Protects the spring from corrosion and dirt. • 15" long plastic tube. Part No.
Cross Reference
Length
Description
Qty.
90862
17-144
15"
Cover For Tender Spring
5
Heavy-duty cable springs
• Zinc plated for corrosion resistance. • Double wire loop ends for extra strength. Part No.
Diameter
Length
Description
Qty.
6030 6082 6083 6084 6031
3/4 1" 1" 1" 1-1/8
13" 13" 16-1/4 25" 28"
Heavy Duty Cable Springs Heavy Duty Cable Springs Heavy Duty Cable Springs Heavy Duty Cable Springs Heavy Duty Cable Springs
1 1 1 1 1
Sliding Axle Tender Spring Kit
• Use with two 3/8" air brake hoses and one 7-way ABS cord. • Includes a carabiner. Part No.
Cross Reference
Size
Description
Qty.
90867
17-183
1" x 16"
Sliding Axle Tender Spring Kit
1
G20
call
1-800-558-2808 /
fax
1-800-553-8769 /
www.IMPERIALSUPPLIES.com
Air Brake Air brake Assemblies A i r b r a k e A s s e m b ly a cc e s s o r i e s Hose separator
• Used to separate rubber air brake hoses on trucks and trailers. • Impact-resistant black plastic. Part No.
For Hose I.D.
Qty.
90498 90498-4 90499 90598 ★ ★ Flexible
3/8 x 3/8 3/8 x 3/8 1/2 x 1/2 3/8 x 3/8
10 100 10 10
Four HOSE HOLDER
• Holds two air brake lines, one seven-way cord and one ISO cord. • Has four 3/4" holes. Part No.
Holes
Qty.
90859
(4) 3/4"
1
HEAVY-DUTY SUPPORT CLAMP
• Rubber clamp halves with steel reinforcement. • Three-hole design with outside holes supporting the air lines and center hole supporting the electrical cord or ABS trailer cable. • Includes a U-bolt with attached eye bolt for easy mounting. • Holds 3/8" hoses or 1/2" O.D. spring guard protected air coils. • The center hole is for any 7 conductor or ABS trailer cable. Part No.
Holes
Qty.
90776 90860
3 2
1 1
#90776
#90860
Phillips® POGO STICK
• Designed for heavier ABS cables. • Extra heavy-duty internal spring. • Includes 3-hose holder. • Heavy duty 7/16" mounting bolt. Part No.
Cross Reference
Length
Qty.
90888
17-0401
40"
1
PHILLIPS QWIK-SNAP™ 3-Hose HOLDER
• Positive lock stays connected at over 80 lb of pull force. • Durable nylon for extreme weather, corrosion and impact resistance. • Adjusts to accommodate one 1/2" and two 3/8" hoses. • Change hoses in seconds. • Comes with snap ring. • No loose parts. Part No.
Cross Reference.
Qty.
90811
17-153
1
AIR LINE GLAD-GRIP
• Reduces air line kinks at the glad hand connection. • Quick and easy installation between the glad hand and air line. • Durable plastic with plated steel coupling. • Package includes one red and one blue grip with hardware. Part No.
Size
Qty.
90643
1/2 NPT
1 pair
National Distributor of Quality Maintenance Supplies Since 1958
G21
Air Brake Glad hands Glad hands GLAD HANDS
POWDER COATED GLAD HANDS WITH and FILTER
• Polyurethane seals. • Cast aluminum. Part No.
Description
Female Thread
Mount Style
Qty.
90753 90754
Blue - Service Red - Emergency
1/2 NPT 1/2 NPT
Straight Straight
2 2
• Full-face black polyurethane seal. • Tough powder coating for corrosion resistance. • Stainless steel clamp and wear plates eliminate corrosion. • Includes stainless steel filter.
Bracket style glad hands for trailers
• Shipped both ports open and plugs loose for customer adaptation as needed. • Full face black rubber seals. • Cast aluminum threads. • For trailer use/40° style.
Part No.
Description
Female Thread
Mount Style
Qty.
90808 90809
Blue - Service Red - Emergency
1/2 NPT 1/2 NPT
Straight Straight
2 2
GLAD HANDS
• Black polyurethane seals, partial faced, soft durometer. • Stainless steel plate. • Electroplated red or blue.
Part No.
Description
Female Thread
Mount Style
Qty.
90621 90622
Red - Emergency Blue - Service
3/8–18 3/8–18
Bracket Bracket
1 1
Part No.
Description
Female Port
Mount Style
Qty.
90817 90818
Blue - Service Red - Emergency
1/2 NPT 1/2 NPT
Straight Straight
2 2
Glad hands
Glad hands
• Powder-coated connector plate for corrosion resistance. • Zinc-coated dented plates. • E-coated screws for corrosion protection.
• Full face black rubber seals. • Universal; couples with emergency, service and universal couplings. • Cast aluminum threads. Part No.
Description
Female Thread
Mount Style
Qty.
90625 90626 90628
Red - Emergency Blue - Service Universal
1/2 NPT 1/2 NPT 1/2 NPT
Straight Straight Straight
2 2 2
Part No.
Description
Mount Style
Qty.
790911 790910
Red - Emergency Blue - Service
Straight Straight
2 2
Glad hands
• Stainless steel connector plate for corrosion resistance. • Stainless Steel dented plates. • E-coated screws for corrosion protection.
Universal iron glad hands
• Black polyurethane seal. • Positive spring loaded locking mechanism keeps glad hand properly positioned. • Meets all applicable requirements of SAE J318, including breakaway requirement. • Solid, one-piece construction. • Tighter fit, better cost per mile. Part No.
Description
Female Port
Mount Style
Qty.
90750 90750-4
Universal - Black Universal - Black
1/2 NPT 1/2 NPT
Straight Straight
2 25
NPTF Port
Mount Style
90751 90772
Blue - Service Red - Emergency
3/8–18 3/8–18
Trailer Trailer
G22
call
Qty. 1
1
1-800-558-2808 /
Mount Style
Qty.
90912 90913
Red - Emergency Blue - Service
Straight Straight
2 2
• Anodized for protection against magnesium chloride, road salt and chemicals. • Wrap around connector plate provides additional strength. • Powder-coated connector plate and E-coated screws. • Zinc coated detente plates. • Polyurethane seal. • Meets SAE J318 specification.
• Full face black rubber seals. • Includes standard rubber glad hand seals. Description
Description
CORROSION-RESISTANT GLAD HAND
SHUT-OFF STYLE GLAD HANDS
Part No.
Part No.
fax
Part No.
Description
Port
Mount
Qty.
90828 90827
Blue - Service Red - Emergency
3/8–18 3/8–18
Trailer Trailer
1 1
1-800-553-8769 /
www.IMPERIALSUPPLIES.com
Air Brake Glad hands Glad hands DUMMY GLAD HAND
SWINGER GLAD HAND
• Constructed of a die cast aluminum with stainless steel wear plates. • Comes with an 18" security cable. • Has a standard rubber seal.
• Designed for intermodal and piggy back trailers where straight or angled glad hands are exposed to damage. • Glad hand swivels 180° without kinking the air line. • Inner seal prevents dirt and insects from entering the air brake system. • When not in use, the glad hand automatically returns to the seal, protecting the air lines. • Cast iron service. • Stainless steel return spring for long life. Part No.
Description
Port
Mount
Qty.
90830 90831
Blue - Service Red - Emergency
3/8 3/8
Swing Trailer
1 1
Part No. 90800
Description
Mount
Qty.
Emergency
Straight Trailer
1
Glad hand seals Polyurethane glad hand seals SOFT DUROMETER
• Won’t dry out, softer material. • Impervious to ozone, acids, road salts, oils, smog and other contaminants. • Color coordinated for red and blue air lines.
Polyurethane glad hand seals Medium durometer
• Won’t dry out, slightly harder than soft style. • Impervious to ozone, acids, road salts, oils, smog and other contaminants. • Color coordinated for red and blue air lines.
Part No.
Color
Lip
Qty.
Part No.
Color
Lip
Qty.
90634 90635 90636
Red Blue Black
1-1/4 1-1/4 1-1/4
25 25 25
90477 90479 90481
Red Blue Black
1-1/2 1-1/2 1-1/2
25 25 25
Partial face type seal
POLYURETHANE CLOSED FACE GLAD HAND SEAL
Polyurethane glad hand seals Medium durometer
• Won’t dry out, slightly harder than soft style. • Impervious to ozone, acids, road salts, oils, smog and other contaminants. • Color coordinated for red and blue air lines. Part No.
Color
Lip
Qty.
90474 90475 90476
Red Blue Black
1-1/4 1-1/4 1-1/4
25 25 25
Full face type seal
• Material: Polyurethane • Must be used with Screen, Part No. 90807. Part No.
Color
Lip
Qty.
90870
Gray
Partial
25
Partial face type seal
Rubber glad hand seals
Rubber Closed faced glad hand seal
• Rubber seal used with red, blue, or universal glad hands.
Compression type, #90630
Part No.
Color
Description
Qty.
90630 90631 90631-4
Black Black Black
Rubber, Compression Type Rubber, Full Face Seal Rubber, Full Face Seal
25 25 100
• Black rubber. • Closed face. Part No.
Color
Description
Qty.
90463
Black
Rubber, Closed Face
25
Full face type seal, #90631
National Distributor of Quality Maintenance Supplies Since 1958
G23
Air Brake Glad hands G l a d h a n d a cc e s s o r i e s GLAD HAND STOWAWAY (DUAL)
Stainless Steel Glad hand filter
• Patented 45° design for ease of use. • Storage for both glad hands and electrical plugs. • Made of impact-resistant plastic. Part No.
Qty.
73131
1
• Eliminates particles from getting into the air-line system.
GLAD HAND STOWAWAY (single)
Qty.
73144
1
Style
Qty.
Not Keyed Alike Keyed Alike
1 1
Part No.
Qty.
90813
1
Trailer King Pin Lock
• Discourages trailer moving by locking to the emergency side glad hand on the trailer. • Fits all styles of glad hands. • Includes two keys. • Plastic body. • Limited amount of differently keyed locks. Part No.
Qty. 10
• For installing new or removing old glad hand seals.
GLAD HAND LOCK
90769 790
Description Stainless Steel Filter
GLAD HAND SEAL TOOL
• Holds an electrical plug and (2) glad hands. • Made of impact-resistant plastic. Part No.
Part No. 90807
• For locking your trailers 5th wheel pin. • Comes with two keys. • Inside Diameter: 2.90" • Height: 3.5" Part No.
Qty.
24448
1
METAL GLAD HAND LOCK
• Cast aluminum for added strength. • Includes two keys. • Fits all styles of glad hands. • Used on the emergency side glad hand on the trailer, to prevent unintentional movement of the trailer during loading, unloading or service. Part No.
Style
Qty.
90821
Keyed Alike
1
Lockout/Tagout Safety Supplies Pages K41 – K43.
Steve Distribution Director
Expectations… “ We strive to not only meet but exceed your expectations in product quality, speed of delivery and service.”
G24
call
1-800-558-2808 /
fax
Imperial offers a complete line of Personal Protective Equipment Products.
1-800-553-8769 /
www.IMPERIALSUPPLIES.com