Grid-Lock Bio/CR
High Performance Composite Wall and Ceiling Systems A secure envelope for research and production environments
System Architecture - Face Panel Face
The exposed or visible face of the panel. GridLock Bio/CR panels propose two options, described below. Both are pinhole free and offer superb performance
Panel Face Option
Description
Detail
Nu Gel
.090 Fiberglass with extra gel coat, ultra smooth, high gloss, no visible glass strands
A high gloss, ultra smooth finish
Standard
A gloss finish that is smooth with a slightly visible fiberglass strand “print”
.090 Fiberglass, standard gel coat, smooth “print” face note- Difficult to see print face on graphic as well as on panel
Surface Performance Guaranteed to have the higest level of performance for any surface finish alternative. Critical environments demand an impervious, highly chemical resistant surface which is easy to clean. All Grid-Lock ceiling and wall systems share the same surface performance charateristics, securing your wall or ceiling surface. Chemical Resistance All surfaces of Grid-Lock Systems have been thoroughly tested against the most agressive disinfecting protocols in the industry. All Systems have superior chemical resistance over virtually any coating and have been proven resistant to: VHP, Chlorine dioxide, Sodium hypochlorite, Quaternary ammonium chlorides, Potassium hydroxides, xylene, beta-dine: Acids including: Phosphoric and Nitric blends, Sulphuric Moisture and Air Impervious All Systems are impervious to air and moisture
Pinhole Free Surfaces Unlike coated surfaces, every Grid-Lock system is Guaranteed Pinhole Free
Quality
Reliability
Service
Life Science Products
Serving the Biomedical, Research and Pharmaceutical field for over 30 years 124 Speer Road Chestertown, MD 21620-1033 1-800-638-9874 www.lspinc.com
System Architecture - Core Core - The foundation of the panel and speaks to the structural integrity of the panel.
GridLock Bio/CR offers four core options all of which have recycled content and are LEED eligible.
Panel Core option
Detail
Description Fiberglass Face
Repeated layers of Aluminum + HDPE
Aluminium Core Component HDPE Core Component
Fiberglass Face
A single layer of HDPE between fiberglass layers
HDPE Core Component Fiberglass Face
Layered Aluminum with foam
Aluminium Core Component Foam Core Component Fiberglass Face
Single layer of Re-May
Woven Composite Component
The Gridlock System Shield - only by Life Science Products Developed as a true “System” for walls or ceilings. Comprised of three main components, each with multiple options - Face, Core, and Joint. These all work together to provide the Grid Lock System for your wall or ceiling Cement and Wood Free
Highly Resistant to cleaning regime degredation
Guaranteed Pinhole Free
Direct mount or clad over CMU or Gyp products
Virtually Seamless*
Exceed USDA, FDA, GMP, NIH and CDC Specifications
Impervious to Air and Water
for surface finishes
System Options The new Grid-Lock series developed by LSP consists of 14 systems designed to address virtually any condition from high containment to conventional facilites, cladding installed over CMU to complete wall and ceiling systems that mount directly to stud. All of our systems have the LSP name of service, quality and expereince. Grid-Lock System
LSP Description
Face
Core
Joint
Bio/CR 1 Wall/Ceiling System
12mm Panel 090 NU gel
NU gel
Aluminium + HDPE
Routed Compound
Bio/CR 2 Wall/ Ceiling System
3mm with 090 NU gel
NU gel
Aluminium + HDPE
Routed Compound
Bio/CR 3 Wall/Ceiling System
12mm Panel with 090 “Print”
Standard
Aluminium + HDPE
Routed Compound
Bio/CR 4 Wall/Ceiling System
3mm with 090 “Print”
Standard
HDPE
Routed Compound
NU gel
Aluminium + HDPE
Battens (square edge)
NU gel
Aluminium + HDPE
Battens (square edge)
Bio/CR 1-B Wall/Ceiling System
12mm Panel NU Gel with Batten
Bio/CR 2-B Wall/Ceiling System
3mm NU gel with Batten
Bio/CR 3-B Wall/Ceiling System
12mm Panel “Print” with Batten
Standard
Aluminium + HDPE
Battens (square edge)
Bio/CR 4-B Wall/Ceiling System
3mm with 090 “Print” with Batten
Standard
Aluminium + HDPE
Battens (square edge)
Bio/CR 5-B Wall/Ceiling System
16mm AL/Foam/AL with “Print” and Batten
Standard
Aluminium + HDPE
Battens (square edge)
Ultra Clean I Wall/Ceiling System
090 NU Gel / .120 Re-May
NU gel
Re-May
Battens (square edge)
Ultra Clean II Wall/Ceiling System
090 “Print” FRP / .120 Re-May
Standard
Re-May
Battens (square edge)
Ultra Clean III Ceiling System
3mm Alum/Poly core/Alum
Aluminium
Aluminium + HDPE
Battens (square edge)
Liner NG Wall System
090 NU Gel FRP
NU gel
None
Battens (square edge)
Liner PC Wall System
090 “Print” through FRP
Standard
None
Battens (square edge)
System Architecture - Joints Joints - The functional union between the panels. Bio/CR panels propose two
options for sealed joints. Both withstand BSL3 and BSL4 pressure testing Joint option
Detail
Description
Urethane Sealant Edge Cut “A”
Routed for a recessed shiplap
Panel Mounting Hardware
Metal Stud
Batten
Countersunk Screws
Squared edge with a Batten
Edge Cut “B”
Recessed shiplap offers secure mounting to the stud and virtually seamless joint face
Panel
Square edge offers a method to secure edges with a batten cover
Dry Wall Metal Stud
Adhesive/sealant
Physical Properties Fire Rating: Light Reflectance @ 85 Minimum Weight: Standard Sizes: Panel thickness: Color: Finish: Hardness: Flexural Mod: Flexural Strength:
Class 1 ASTM E 84 for flame spread of 25 or less ASTM 523-89 94.3 3.0 lbs. per square foot 4’ X 8’ and 4’ x 10’ 7/16” White Gloss ASTM D-785 46 Barcol ASTM D-790-07 657,693 ASTM D 790-07 6751 psi
Water Vapor Transmission: Air Permeance: STC Rating: Tensile Strength: Tensile Mod: Coefficient of Linear Thermal Expansion CLTE (mm mm C): Compressive Strength: (one panel) Modulus:
ASTM E-96 < 0.0001 perms ASTM E-2178 (L/s/m2) 0.00001 @ 300 pa ASTM E-90 32 ASTM D-638 3672 psi ASTM D-638 581,000 ASTM D-696 4.30 E -05
ASTM D-695
9493 psi
ASTM D-695 psi
49,873
Properties listed are for Bio/CR 1 and 3. Specifications available for full specturm of products.