Compression Fittings 36 Series Metric 4 mm – 28 mm O/D tube
● Wide range of types and sizes ● Rugged and durable ● Suitable for use under extreme conditions of pressure and temperature ● Ideal for most general industrial applications
Technical Data Medium: Compressed air*.
Ordering Information To order, quote appropriate product number from the tables on the following pages.
*Consult our Technical Service for use with other fluids.
Operating Pressure: The maximum working pressure is limited by the type of tubing being used. Refer to Section 9.12 for details. Operating Temperature: The maximum working temperature is limited by the type of tubing being used. Refer to Section 9.12 for details. Tube Sizes: 4, 5, 6, 8, 10, 12, 15, 16, 18, 22, 28 mm O/D. Tubing: Nylon 11 or 12 and other plasticised or unplasticised tubing which conforms to the tolerances specified in BS 5409: Part 1 1976. Copper, annealed and half-hard to BS 2871: Part 2. Double wall brazed steel. Materials Brass to BS 2874: 1986 (CZ121) for tubing nut, sleeve and body manufactured from bar. Brass to BS 2872: 1969 (CZ122) for body manufactured from stamping. Banjo bolts have a bright nickel plated finish.
06/97
Our policy is one of continuous research and development. We therefore reserve the right to amend, without notice, the specifications given in this document.
N/AL 9.6.001.01
Compression Fittings Metric Straight Connectors and Adaptors STEM TAILPIECE ADAPTOR Tube stem to hose 36 0524
FEMALE TAILPIECE ADAPTOR Tube to hose 36 0522
STRAIGHT STEM ADAPTOR Tube stem to male parallel BSP thread
STRAIGHT STEM ADAPTOR Tube stem to male taper BSP thread
36 0521
NIPPLED STEM CONNECTOR Male tube to tube stem 36 0625
REDUCING CONNECTOR Female tube to male tube 36 0517
BULKHEAD CONNECTOR Female tube 36 0508
36 0531
Page 9.6.001.06
Page 9.6.001.06
Page 9.6.001.06
Page 9.6.001.07
Page 9.6.001.07
Page 9.6.001.07
Page 9.6.001.07
NIPPLED CONNECTOR Male tube
MALE CONNECTOR Male to male
UNEQUAL CONNECTOR Female tube to male tube
STRAIGHT CONNECTOR Female tube
BRACKETED STRAIGHT CONNECTOR Female tube
METRIC TO INCH ADAPTOR Male tube to female tube
NIPPLED ADAPTOR Male tube to metric and UNF female thread
36 0503
36 0552
36 0632
36 0562
36 0737
36 0562
36 0553
Page 9.6.001.08
Page 9.6.001.08
Page 9.6.001.08
Page 9.6.001.08
Page 9.6.001.08
Page 9.6.001.09
Page 9.6.001.09
NIPPLED ADAPTOR Male tube to male taper BSP thread
NIPPLED ADAPTOR Male tube to female parallel BSP thread
STRAIGHT MALE ADAPTOR Female tube to male taper BSP thread 36 0530
STRAIGHT MALE ADAPTOR (NPTF) Female tube to male NPTF thread 36 0532
STRAIGHT MALE ADAPTOR Female tube to male thread 36 0554
MALE ADAPTOR
STRAIGHT MALE ADAPTOR Female tube to male parallel BSP thread 36 0504
Page 9.6.001.10
Page 9.6.001.10
Page 9.6.001.10
Page 9.6.001.10
Page 9.6.001.10
BRACKETED ELBOW CONNECTOR Female tube 36 0548
FEMALE ELBOW ADAPTOR Female tube to female parallel BSP thread 36 0555
MALE ELBOW ADAPTOR Female tube to male taper BSP thread
MALE ELBOW ADAPTOR Female tube to male NPTF thread 36 0331
Page 9.6.001.12
Page 9.6.001.12
Page 9.6.001.13
Page 9.6.001.13
BRACKETED TEE CONNECTOR Female tube
MALE TEE ADAPTOR Female tube to male taper BSP thread
MALE SIDE TEE ADAPTOR Female tube to male taper BSP thread 36 0628
36 0556
36 0557
Page 9.6.001.09
Page 9.6.001.09
STRAIGHT ADAPTOR Female tube to female parallel BSP thread
HOBBS STRAIGHT CONNECTOR Male parallel BSP thread
36 0505
Page 9.6.001.11
36 0738
36 0543
Page 9.6.001.17
Elbow Connectors and Adaptors UNIVERSAL STEM ELBOW STEM ELBOW Tube stem CONNECTOR Female tube to tube stem 36 0292 36 0551
ELBOW CONNECTOR Female tube 36 0511
Page 9.6.001.11
Page 9.6.001.12
Page 9.6.001.11
36 0005
HOBBS ELBOW ADAPTOR Female tube to male parallel BSP thread 36 0541
Page 9.6.001.17
Tee, ‘Y’ and Four Way Connectors and Adaptors STEM TEE CONNECTOR Female tube to tube stem
90° STEM TEE CONNECTOR Female tube to tube stem
SIDE STEM TEE CONNECTOR Female tube to tube stem
36 0631
36 0511
36 0550
Page 9.6.001.14 ‘Y’ CONNECTOR Female tube 36 0558
Page 9.6.001.15
N/AL 9.6.001.02
Page 9.6.001.14 FOUR WAY CONNECTOR Female tube
36 0514
Page 9.6.001.14
36 0627
36 0549
Page 9.6.001.14
Page 9.6.001.15
Page 9.6.001.15
Page 9.6.001.15
HOBBS TEE ADAPTOR Female tube to male parallel BSP thread
36 0516
Page 9.6.001.16
TEE CONNECTOR Female tube
36 0542
Page 9.6.001.18
Our policy is one of continuous research and development. We therefore reserve the right to amend, without notice, the specifications given in this document.
06/97
Compression Fittings Metric Manifolds SINGLE SIDED MANIFOLD
DOUBLE SIDED MANIFOLD 36 0406
36 0304
Page 9.6.001.16
Page 9.6.001.16
Banjos ELBOW BANJO ASSEMBLY Non regulating BSPP bolt Female tube to male parallel BSP thread 36 0395
Page 9.6.001.20
ELBOW BANJO ASSEMBLY Regulating BSPP bolt Female tube to male parallel BSP thread 36 0395
TEE BANJO ASSEMBLY Non regulating BSPP bolt Female tube to male parallel BSP thread
ELBOW BANJO BODY Tube
TEE BANJO BODY Tube
36 0384
BANJO BOLTS Regulating
36 0394
BANJO BOLTS Non-regulating 36 0461
36 0451
36 0395
Page 9.6.001.20
Page 9.6.001.20
Page 9.6.001.21
Page 9.6.001.21
Page 9.6.001.21
Page 9.6.001.21
TAP
TUBING PLUG Male tube thread
BULKHEAD LOCKNUT
HOBBS CONED LOCKNUT Female parallel BSP thread 36 0540
HOBBS SEAL Female tube
SEALING WASHERS For use with banjo fitting
Page 9.6.001.17
Accessories FORM CUTTER 39 0500
36 0509
39 0501
36 0520
Page 9.6.001.06
Page 9.6.001.06
Page 9.6.001.06
Page 9.6.001.08
Page 9.6.001.17
UNIVERSAL TUBING SLEEVE
TUBING SLEEVE
TUBING NUT
FOLDED COPPER WASHER 48 0213
‘O’ RING SEAL
Page 9.6.001.18
Page 9.6.001.18
36 0501
Page 9.6.001.18
06/97
36 0502
Page 9.6.001.18
36 0500
Page 9.6.001.18
34 0156
48 0314
Page 9.6.001.17
48 0261
Our policy is one of continuous research and development. We therefore reserve the right to amend, without notice, the specifications given in this document.
N/AL 9.6.001.03
Compression Fittings Metric Assembly Details Tubing Nut
Tubing Sleeve Body
Tube Stop
Method of Assembly
1. Ensure that the tube is cut square and is free from fraze.
2. Place the tubing nut and sleeve on the tube and push the tube into the fitting until it bottoms on the tube stop.
3. Holding the tube firmly in contact with the tube stop screw the tubing nut down finger tight and then tighten a further 1-13/4 full turns. Slacken off the assembly and then pinch down again.
The method of preparation and assembly described will ensure leak-proof joints over a wide pressure range, depending upon the size and type of tubing being used. Failure to follow this guide, or over-tightening at any joint, will only lead to damage of the fittings or an unsatisfactory seal.
Instructions For Machining Where for some reason, such as saving overall space, it is desired to dispense with the male adaptor and fit a tube, complete with its associated nut and sleeve, direct into a casting, this may be done as illustrated below, by machining the correct form and thread with the appropriate size of form cutter and tap.
1. DRILL It is difficult to recommend specific drill sizes to suit our range of form cutters and taps without having detailed knowledge of the material to be machined and details of the particular installation. As a general rule, however, when preparing for an Enots compression assembly, a drill size of 1 mm less in diameter than the tubing size should be used, up to and including 8 mm tube. For larger tubing, a drill of approximately 2 mm less in diameter is recommended.
2. FORM
3. TAP
4. ASSEMBLY
The correct form cutter should be selected from the table overleaf for the outside diameter tubing being used.
The correct size thread tap should be selected from the table overleaf for the outside diameter tubing being used. Owing to the fine pitch of the threads used, only a plug tap is required.
The tube, or stem fittings, with appropriate tubing nut and sleeve, can now be assembled into the port.
We can advise on individual problems but we cannot be held responsible for failures due to non-observance of the dimensions and tolerances which we lay down for these compression unions.
N/AL 9.6.001.04
Our policy is one of continuous research and development. We therefore reserve the right to amend, without notice, the specifications given in this document.
06/97
Compression Fittings Metric Torque Figures Metric Recommended torque using 36 0501 00 series sleeves O.D. tube
Half hard copper 4,5 Nm 6,8 Nm 9,0 Nm 11,3 Nm 21,5 Nm 24,9 Nm 34,0 Nm 46,0 Nm 52,0 Nm 79,0 Nm 76,0 Nm
4 5 6 8 10 12 15 16 18 22 28
Annealed copper
Nylon 11 & 12
Double Wall Brazed Steel
3,4 Nm 5,7 Nm 7,9 Nm 7,9 Nm 18,1 Nm 22,6 Nm 28,0 Nm 31,0 Nm 35,0 Nm 68,0 Nm 68,0 Nm
2,8 Nm 5,7 Nm 5,7 Nm 7,9 Nm 13,6 Nm 15,8 Nm 25,0 Nm 26,0 Nm 45,0 Nm 46,0 Nm 96,0 Nm
5,7 Nm 10,2 Nm 12,4 Nm 21,5 Nm 27,1 Nm -
Conversion: Nm x 0,74 = lbf ft
Typical Dimensions Hose stem to tube with reducing connector
W
F
O.D. tube
V
A
F
W
4 5 6 8 10 12 15 16 18 22 28
A thread details M8 x 1,0 M10 x 1,0 M11 x 1,0 M13 x 1,0 M15 x 1,0 M18 x 1,5 M22 x 1,5 M24 x 1,5 M26 x 1,5 M30 x 1,5 M38 x 1,5
F
V
W
10,5 12,0 12,0 15,0 16,5 17,0 18,5 19,0 20,0 24,5 30,0
8,3 9,5 9,4 11,7 12,7 13,4 16,0 16,2 17,0 20,5 25,8
6,0 6,5 7,0 8,0 8,0 9,0 10,0 10,5 10,5 11,0 12,5
A
= outside diameter tube size and thread details.*
F
= tube or stem length inside fitting.
V
= nippled connector length inside fitting.
W = projection of tubing nut from compression joint. All these dimensions are common to a particular tubing outside diameter size. Refer to later pages in this section for details of individual coupling dimensions. Dimensions V & W will vary with the torque applied so these dimensions are guidance only. *Note: The ‘O/D tube’ sizes in the following tables refer to the Enots compression threads listed above.
06/97
Our policy is one of continuous research and development. We therefore reserve the right to amend, without notice, the specifications given in this document.
N/AL 9.6.001.05
Compression Fittings Metric Form Cutter
Tap
F
A O/D tube 4 5 6 8 10 12 16 22 28
39 0500 02 39 0500 03 39 0500 04 39 0500 05 39 0500 06 39 0500 07 39 0500 08 39 0500 10 39 0500 12
D
D
F
K
Product number
48 48 48 48 48 48 48 48 48
10,5 12,0 12,0 15,0 16,5 17,0 19,0 24,5 30,0
12,7 12,7 12,7 12,7 12,7 12,7 20,0 20,0 20,0
39 0501 02 39 0501 03 39 0501 04 39 0501 05 39 0501 06 39 0501 07 39 0501 08 39 0501 10 39 0501 12
A
A
ØK
Product number
Plug taps only available
Tubing Plug
Stem Tailpiece Adaptor
Male O/D tube thread
O/D tube stem to hose
D
E A/F 8 10 13 13 17 19 22 24 27 30 41
C
15,3 17,0 17,0 19,5 21,0 23,5 26,5 27,0 29,0 33,5 41,5
Product number
L
ØS
D
A
A O/D tube 4 5 6 8 10 12 15 16 18 22 28
36 0509 02 36 0509 03 36 0509 04 36 0509 05 36 0509 06 36 0509 07 36 0509 15 36 0509 08 36 0509 18 36 0509 10 36 0509 12
E
A
Product number
For O/D tube 4 5 6 8 10 12 16 22 28
D
A O/D stem 4 5 6 8 10 12 16 22 28
36 0524 15 36 0524 16 36 0524 24 36 0524 25 36 0524 42 36 0524 43 36 0524 53 36 0524 67 36 0524 83
A thread M8 x 1,0 M10 x 1,0 M11 x 1,0 M13 x 1,0 M15 x 1,0 M18 x 1,5 M24 x 1,5 M30 x 1,5 M38 x 1,5
C hose bore 5,0 5,0 6,3 6,3 10,0 10,0 12,5 19,0 25,0
Female Tailpiece Adaptor
Straight Stem Adaptor
Tube to hose
O/D tube stem to male parallel BSP thread
L
S
36,5 38,5 40,5 43,5 47,0 49,0 54,8 64,7 76,0
17,5 17,0 17,5 17,5 19,0 19,0 20,0 22,7 24,0
1,9 2,8 4,3 4,3 7,3 7,3 9,7 15,8 21,5
D
L
G
ØM
B
ØS
A
E
C
A
ØS
T
E
D
D
Product number 36 0522 25 36 0522 43 36 0522 53
A O/D tube 8 12 16
C hose bore 6,3 10,0 12,5
D
E A/F
L
S
Product number
37 41 45
17 22 27
20 22 23
5,5 8,5 10,5
36 0521 03 36 0521 05 36 0521 10 36 0521 11 36 0521 20 36 0521 21 36 0521 31 36 0521 47 36 0521 62
A O/D stem 5 8 6 8 10 12 16 22 28
B BSPP
D
E A/F
G
M
S
T
1
36 40 42 45 49 51 61 71 85
13 13 19 19 24 24 27 36 41
7,4 7,4 11,0 11,0 11,4 11,4 15,0 16,3 19,1
13 13 18 18 22 22 26 32 39
3 5 4 5 7 9 12 18 23
21 26 23 26 28 30 35 42 51
/8" /8" 1 /4" 1 /4" 3 /8" 3 /8" 1 /2" 3 /4" 1" 1
Sealing washers should be ordered separately, see pages 9.6.001.42 – 43.
N/AL 9.6.001.06
Our policy is one of continuous research and development. We therefore reserve the right to amend, without notice, the specifications given in this document.
06/97
Compression Fittings Metric Straight Stem Adaptor
Nippled Stem Connector
O/D tube stem to male taper BSP thread
Male O/D tube to O/D tube stem
D
T
A1
ØS
B
ØS
A
E
E
G
A
T
D
36 0531 03 36 0531 04 36 0531 05 36 0531 10 36 0531 11 36 0531 12 36 0531 20 36 0531 21
A O/D stem 5 6 8 6 8 10 10 12
B thread BSPP
D
E A/F
G
S
T
Product number
1
35 37 40 42 45 47 49 51
13 13 13 14 14 14 19 19
9,5 9,5 9,5 11,1 11,0 11,1 12,7 12,7
3 4 5 4 5 7 7 9
21 23 26 23 26 28 28 30
36 O625 03 36 O625 04 36 O625 05 36 O625 06 36 O625 07
/8" /8" 1 /8" 1 /4" 1 /4" 1 /4" 3 /8" 3 /8" 1
A1 O/D stem 5 6 8 10 12
A O/D tube 5 6 8 10 12
Female O/D tube
A1
A
E
D
06/97
36 0517 26 36 0517 27 36 0517 28 36 0517 37 36 0517 38 36 0517 39 36 0517 40 36 0517 41 36 0517 47 36 0517 48 36 0517 49 37 0517 57 36 0517 50 36 0517 56 36 0517 57 36 0517 58 36 0517 64 37 0517 61 36 0517 65 36 0517 71 36 0517 73 36 0517 75 36 0517 78 36 0517 80 36 0517 87
A1 O/D tube 5 6 8 6 8 10 12 16 8 10 12 15 16 10 12 16 12 15 16 16 22 28 22 28 28
A O/D tube 4 4 4 5 5 5 5 5 6 6 6 6 6 8 8 8 10 10 10 12 12 12 16 16 22
D
E A/F
S
20,0 16,0 19,5 22,0 19,5 21,0 23,5 27,0 25,0 21,0 23,5 26,5 27,0 27,5 23,5 27,0 31,0 27,0 27,0 27,0 33,5 41,5 33,5 41,5 41,5
10 13 13 13 13 17 19 24 13 17 19 22 24 17 19 24 19 22 24 24 30 41 30 41 41
2,8 2,8 2,8 3,4 3,4 3,4 3,4 3,4 4,0 4,0 4,0 6,0 4,0 6,0 6,0 6,0 7,6 6,0 7,6 9,6 9,6 9,6 13,6 13,6 19,0
A
ØS
Product number
E A/F
S
T
38,0 40,0 45,5 49,0 53,5
10,0 13,0 13,0 17,0 19,0
3,0 4,0 5,0 7,0 9,0
21,0 23,0 26,0 28,0 30,0
ØS
Bulkhead Connector
Female O/D tube to male O/D tube
E
Reducing Connector
D
P
Product number
N G D
Product number 36 0508 02 36 0508 03 36 0508 04 36 0508 05 36 0508 06 36 0508 07 36 0508 08 36 0508 10 36 0508 12
A O/D tube 4 5 6 8 10 12 16 22 28
D
E A/F
G
23 26 26 32 35 36 41 53 64
17 19 19 22 24 30 36 46 55
18 20 20 26 29 30 35 44 54
N max. bulkhead 12 13 13 19 20 21 25 33 42
P thread
S
Bulkhead clearance drilling M12 x 1,0 2,8 13 M15 x 1,0 3,4 16 M15 x 1,0 4,0 16 M18 x 1,5 6,0 19 M20 x 1,5 7,6 21 M24 x 1,5 9,6 25 M30 x 1,5 13,6 32 M38 x 1,5 19,0 40 M48 x 1,5 25,0 50
Locknut number 36052001 36052003 36052003 36052005 36052006 36052007 36052008 36052010 36052012
Minimum Bulkhead thickness 3,0. Locknuts should be ordered separately, see next page.
Our policy is one of continuous research and development. We therefore reserve the right to amend, without notice, the specifications given in this document.
N/AL 9.6.001.07
Compression Fittings Metric Nippled Connector
Bulkhead Locknut
Male O/D tube Product number
P thread
D
E A/F
36 0520 01 36 0520 03 36 0520 05 36 0520 06 36 0520 07 36 0520 08 36 0520 10 36 0520 12
M12 x 1,0 M15 x 1,0 M18 x 1,5 M20 x 1,5 M24 x 1,5 M30 x 1,5 M38 x 1,5 M48 x 1,5
5 6 6 7 7 8 9 10
17 22 24 27 30 41 46 55
Product number
E
36 0632 02 36 0632 03 36 0632 04 36 0632 05 36 0632 06 36 0632 07
A
E
ØS
D
P
D
Female O/D tube to male O/D tube
36 0737 01
M5 x 0,8 15
E G A/F
S
7
2
5
ØS
Sealing washers should be ordered separately, quote: 48031400.
Product number A1
D
36 0562 26 36 0562 27 36 0562 28 36 0562 37 36 0562 38 36 0562 47 36 0562 48 36 0562 56 36 0562 57 36 0562 64
ØS
A thread
A
Product number
E
A
A
Unequal Connector
Male to male
E
Male Connector
G D
D
Straight Connector
Bracketed Straight Connector
Female O/D tube
Female O/D tube
A O/D tube 4 5 6 8 10 12
A1 O/D tube 4 4 4 5 5 6 6 8 8 10
D
E A/F
S
28,0 31,4 31,4 36,0 39,0 43,5
8 10 13 13 17 19
2,2 3,0 4,0 5,4 7,0 9,0
A O/D tube 5 6 8 6 8 8 10 10 12 12
D
E A/F
S
26 26 29 26 30 30 33 35 35 36
13 13 17 13 17 17 19 19 22 22
2,0 2,0 2,0 2,0 3,0 4,0 4,0 5,2 5,2 7,5
R A
ØS
ØK
D1
ØS
A
E
ØQ
D D
Product number 36 0503 02 36 0503 03 36 0503 04 36 0503 05 36 0503 06 36 0503 07 36 0503 15 36 0503 08 36 0503 18 36 0503 10 36 0503 12
A O/D tube 4 5 6 8 10 12 15 16 18 22 28
N/AL 9.6.001.08
D
E A/F
S
Product number
22,0 26,0 26,0 32,0 35,0 36,0 40,0 41,0 43,5 53,0 64,0
10 13 13 17 19 22 27 27 32 36 46
2,8 3,4 4,0 6,0 7,6 9,6 12,6 13,6 15,3 19,0 25,0
36 0552 02 36 0552 03 36 0552 04 36 0552 05 36 0552 06 36 0552 07
A O/D tube 4 5 6 8 10 12
D
D1
K
Q
R
S
24,0 27,0 27,0 33,3 35,0 37,0
14,9 22,2 22,2 24,6 25,4 29,4
10,3 14,3 14,3 17,5 23,8 23,8
5,2 x 11,9 6,75 x 15,9 6,75 x 15,9 6,75 x 19,0 6,75 x 25,4 6,75 x 25,4
5,5 8,7 8,7 9,5 11,1 11,1
3,0 4,0 4,5 6,5 8,0 10,0
Our policy is one of continuous research and development. We therefore reserve the right to amend, without notice, the specifications given in this document.
06/97
Compression Fittings Metric Metric to Inch Adaptor
Nippled Adaptor
Inch O/D tube male to metric O/D tube female
Male tube to metric and UNF female thread
D
E A/F
S
10 10 10 13 13 13 13 17 17 19 22 30 30 36 36 46
1,6 2,4 2,8 2,8 2,8 2,8 3,2 3,2 6,0 6,3 9,6 13,6 13,6 16,0 19,0 25,0
E
Y
AB
A1 D O/D tube 1 /8" 18,5 5 /32" 17,5 3 /16" 22,0 3 /16" 24,0 3 /16" 27,0 1 /4" 20,0 1 /4" 23,5 1 /4" 25,5 5 /16" 25,0 3 /8" 28,0 1 /2" 32,0 5 /8" 34,5 3 /4" 36,0 3 /4" 48,5 11/8" 45,0 19,0 54,0
A
A O/D tube 4 4 4 5 6 4 6 8 8 10 12 16 16 22 22 28
ØS
36 0562 02 36 0562 09 36 0562 15 36 0562 16 36 0562 17 36 0562 22 36 0562 24 36 0562 25 36 0562 32 36 0562 42 36 0562 52 36 0562 59 36 0562 65 36 0562 67 36 0562 73 36 0562 79
E
A
A1
ØS
Product number
D
Product number 36 0553 30 36 0553 43 36 0553 53 36 0643 53
A1 O/D tube 6 6 6 4
AB thread
D
E A/F
S
V
M8 x 1,0 M10 x 1,0 M14 x 1,4 10 - 32 UNF
21,5 26,0 27,5 15,0
13,0 14,0 19,0 8,0
4,0 4,0 4,0 2,2
8,0 11,0 11,0 7,0
G
G D
D
Product number 36 0556 02 36 0556 03 36 0556 04 36 0556 05 36 0556 08 36 0556 09 36 0556 10 36 0556 11 36 0556 12 36 0556 19 36 0556 20 36 0556 21 36 0556 30
06/97
A O/D tube 4 5 6 8 4 5 6 8 10 8 10 12 12
B thread BSP
D
E A/F
G
S
Product number
1
26,0 27,5 27,5 30,0 28,5 30,0 30,0 32,0 33,5 37,0 38,0 40,0 44,0
13 13 13 14 14 14 14 14 17 19 19 19 22
9,5 9,5 9,5 9,5 11,1 11,1 11,1 11,1 11,1 12,7 12,7 12,7 15,9
2,2 3,0 4,0 5,0 2,2 3,0 4,0 5,4 6,4 5,4 7,0 9,0 9,0
36 0557 02 36 0557 03 36 0557 04 36 0557 05 36 0557 08 36 0557 09 36 0557 10 36 0557 11 36 0557 12 36 0557 19
/8" /8" 1 /8" 1 /8" 1 /4" 1 /4" 1 /4" 1 /4" 1 /4" 3 /8" 3 /8" 3 /8" 1 /2" 1
B
A
B
A
ØS
Male O/D tube to female parallel BSP thread
E
Male O/D tube to male taper BSP thread
ØS
Nippled Adaptor
E
Nippled Adaptor
A O/D tube 4 5 6 6 8 10 8 8 12 12
B thread BSP
D
E A/F
G
S
1
24,0 24,5 24,5 28,0 30,0 31,5 30,5 32,0 34,0 39,5
13 13 13 17 17 17 22 22 22 27
7,5 7,5 7,5 11,0 11,0 11,0 11,5 11,5 11,5 15,0
2,2 3,0 4,0 4,0 5,4 7,0 5,4 7,0 9,0 9,0
/8" /8" 1 /8" 1 /4" 1 /4" 1 /4" 3 /8" 1 /4" 3 /8" 1 /2" 1
Our policy is one of continuous research and development. We therefore reserve the right to amend, without notice, the specifications given in this document.
N/AL 9.6.001.09
Compression Fittings Metric Straight Male Adaptor
Straight Male Adaptor (NPTF)
Female O/D tube to male taper BSP thread
Female O/D tube to male NPTF thread
G D
B
D
E G A/F
thread
S
Product number
/8" 1 /8" 1 /8" 1 /8" 1 /8" 1 /4" 1 /4" 1 /4" 1 /4" 1 /4" 1 /4" 3 /8" 3 /8" 3 /8" 3 /8" 3 /8" 1 /2" 1 /2" 1 /2" 1 /2" 1 /2" 3 /4" 3 /4" 3 /4"
18,5 20,0 20,0 26,5 28,0 18,0 21,6 21,6 23,0 30,0 31,1 21,0 21,0 26,0 29,0 35,0 25,0 27,0 30,0 31,0 38,5 33,0 35,0 35,0
13 13 14 17 19 14 14 14 17 19 22 19 19 19 22 30 22 22 22 27 30 30 30 32
9,5 2,8 9,5 3,4 9,5 4,0 9,5 4,7 9,5 4,7 11,11 2,8 11,11 3,4 11,11 4,0 11,11 6,0 11,11 7,0 11,11 6,4 12,7 4,0 12,7 6,0 12,7 8,0 12,7 9,6 12,7 10,0 15,9 6,0 15,9 8,0 15,9 10,0 15,9 12,6 15,9 13,6 19,5 10,0 19,1 13,6 19,0 15,3
B
1
ØS
BSP E
36 0530 02 36 0530 03 36 0530 04 36 0530 05 36 0530 06 36 0530 08 36 0530 09 36 0530 10 36 0530 11 36 0530 12 36 0530 13 36 0530 18 36 0530 19 36 0530 20 36 0530 21 36 0530 22 36 0530 28 36 0530 29 36 0530 30 37 0530 57 36 0530 31 36 0530 44 36 0530 45 37 0530 62
A O/D tube 4 5 6 8 10 4 5 6 8 10 12 6 8 10 12 16 8 10 12 15 16 12 16 18
A
B
E
A
ØS
Product number
G D
36 0532 03 36 0532 04 36 0532 05 36 0532 09 36 0532 10 36 0532 11 36 0532 12 36 0532 13 36 0532 19 36 0532 20 36 0532 21 36 0532 29 36 0532 30 36 0532 31
Straight Male Adaptor
Male Adaptor
Female O/D tube to metric male thread
Male metric to male taper BSP thread
36 0554 10 36 0554 20 36 0554 21 36 0554 31 36 0554 32 36 0554 42 36 0554 43 36 0554 54 36 0554 65
A1 O/D tube 4 5 5 6 6 8 8 10 12
D
E G A/F
S
19,0 20,0 26,5 22,0 22,5 26,0 33,0 34,0 23,0 27,0 31,0 26,0 31,0 40,0
13 14 17 14 14 17 19 22 19 19 22 24 24 30
3,4 4,0 4,7 3,4 4,0 6,0 7,6 8,0 6,0 7,6 9,6 7,6 9,6 12,0
thread
NPTF 1
/8" /8" 1 /8" 1 /4" 1 /4" 1 /4" 1 /4" 1 /4" 3 /8" 3 /8" 3 /8" 1 /2" 1 /2" 1 /2" 1
9,5 9,5 9,5 14,3 14,3 14,3 14,3 14,3 14,3 14,3 14,3 19,0 19,0 19,0
G
E
B ØS
A
AB
G D
Product number
B
ØM
ØS
A
E
G1
A O/D tube 5 6 8 5 6 8 10 12 8 10 12 10 12 16
D
AB thread
D
E A/F
G
M
S
Product number
A1 thread
AB BSPT thread
D
E
G
G1
S
M8 x 1,0 M8 x 1,0 M10 x 1,0 M10 x 1,0 M12 x 1,0 M12 x 1,0 M12 X 1,5 M14 X 1,5 M16 X 1,5
19 21 20 20 20 25 26 28 28
13 13 14 17 17 17 17 19 22
8,1 8,0 8,0 8,1 8,1 8,1 10,0 10,1 10,1
12,0 12,0 13,5 14,0 16,5 16,5 16,5 18,5 21,0
2,8 3,0 3,4 4,0 4,0 5,0 5,5 6,0 7,6
36 0738 02
M5 x 0,8
1
20
10
9,5
5,0
2,0
N/AL 9.6.001.010
/8"
Sealing washers should be ordered separately, quote 48031400.
Our policy is one of continuous research and development. We therefore reserve the right to amend, without notice, the specifications given in this document.
06/97
Compression Fittings Metric
G
G D
D
Product number 36 0504 02 36 0504 03 36 0504 04 36 0504 05 36 0504 08 36 0504 09 36 0504 10 36 0504 11 36 0504 12 36 0504 13 36 0504 18 36 0504 19 36 0504 20 36 0504 21 36 0504 22 36 0504 28 36 0504 29 36 0504 30 36 0504 31 36 0504 33 36 0504 45 36 0504 47 36 0504 49 36 0504 60 36 0504 62
A O/D tube 4 5 6 8 4 5 6 8 10 12 6 8 10 12 16 8 10 12 16 22 16 22 28 22 28
B
ØS
A
E
B
A
ØM
Female O/D tube to female parallel BSP thread
ØS
Straight Adaptor
Female O/D tube to male parallel BSP thread
E
Straight Male Adaptor
B thread BSP
D
E A/F
G
M
S
Product number
1
15 18 21 25 18 20 21 25 30 30 22 23 24 29 34 25 25 27 36 44 32 43 53 42 52
13 13 17 17 19 19 19 19 19 22 22 24 24 24 27 27 27 27 27 36 36 36 46 41 46
7,4 7,4 7,4 7,4 11,0 11,0 11,0 11,0 11,0 11,0 11,4 11,4 11,4 11,4 11,4 15,0 15,0 15,0 15,0 15,0 16,3 16,3 16,3 19,1 19,1
13 13 14 14 18 18 18 18 18 18 21,5 22 22 22 22 26 26 26 26 26 32 32 32 39 39
2,8 3,4 4,0 5,0 2,8 3,4 4,0 6,0 7,0 7,0 4,0 6,0 7,6 9,6 10,0 6,0 7,6 9,6 13,6 13,6 13,6 19,0 19,0 19,0 25,0
36 0505 02 36 0505 03 36 0505 04 36 0505 05 36 0505 09 36 0505 10 36 0505 11 36 0505 12 36 0505 19 36 0505 20 36 0505 21 36 0505 30 36 0505 31 36 0505 47 36 0505 62
/8" /8" 1 /8" 1 /8" 1 /4" 1 /4" 1 /4" 1 /4" 1 /4" 1 /4" 3 /8" 3 /8" 3 /8" 3 /8" 3 /8" 1 /2" 1 /2" 1 /2" 1 /2" 1 /2" 3 /4" 3 /4" 3 /4" 1" 1" 1
A O/D tube 4 5 6 8 5 6 8 10 8 10 12 12 16 22 28
B thread BSP
D
E A/F
G
S
1
23 25 25 28 27 27 30 31 32 33 33,5 37 38 48 55
13 13 13 17 17 17 17 19 22 22 22 27 30 36 46
9,5 9,5 9,5 9,5 11,0 11,0 11,0 11,0 12,7 12,7 12,7 16,0 16,0 17,5 19,0
2,8 3,4 4,0 6,0 3,4 4,0 6,0 7,6 6,0 7,6 9,6 9,6 13,6 19,0 25,0
/8" /8" 1 /8" 1 /8" 1 /4" 1 /4" 1 /4" 1 /4" 3 /8" 3 /8" 3 /8" 1 /2" 1 /2" 3 /4" 1" 1
Sealing washers should be ordered separately, see pages 9.6.001.42–43.
Universal Stem Elbow
Stem Elbow Connector
O/D tube stem
Female O/D tube to O/D tube stem
J
J
K
S
Product number
J
A A1 J O/D O/D
J1
K
S
29,5 30,6 34,9 41,3 43,5 53,0
14,3 14,3 17,5 23,0 23,0 30,0
3 4 5 7 9 12
tube stem
11,1
5,0 ØK
31,8
J1
J
A
K
36 0292 05
A O/D stem 8
A
Product number
36 0551 03 36 0551 04 36 0551 05 36 0551 06 36 0551 07 36 0551 08
5 6 8 10 12 16
5 6 8 10 12 16
17 19 23 23 24 30
ØS
ØS A1
06/97
Our policy is one of continuous research and development. We therefore reserve the right to amend, without notice, the specifications given in this document.
N/AL 9.6.001.011
Compression Fittings Metric Elbow Connector
Bracketed Elbow Connector
Female O/D tube
Female O/D tube J
J
J
R
A
ØS
ØK
ØS
A
ØK
J
ØQ R
Product number 36 0511 02 36 0511 03 36 0511 04 36 0511 05 36 0511 06 36 0511 07 36 0511 15 36 0511 08 36 0511 18 36 0511 10 36 0511 12
A O/D tube 4 5 6 8 10 12 15 16 18 22 28
D
E A/F
S
Product number
13,5 15,5 16,0 20,0 23,0 25,0 29,0 29,0 32,0 39,0 45,0
11,1 12,7 14,3 16,0 20,0 24,0 27,8 27,8 30,9 36,5 47,6
2,8 3,4 4,0 6,0 7,6 9,6 12,6 13,6 15,3 19,0 25,0
36 0548 02 36 0548 03 36 0548 04 36 0548 05 36 0548 06 36 0548 07
A O/D stem 4 5 6 8 10 12
J
K
Q
R
S
13,5 23,8 21,0 26,2 25,4 32,0
10,3 13,5 16,7 16,7 22,2 22,2
5,2 x 11,9 6,75 x 16,7 6,75 x 19,0 6,75 x 19,0 6,75 x 25,4 6,75 x 25,4
7,1 6,7 7,8 7,8 11,2 11,2
3,0 4,0 4,5 6,5 8,0 10,0
Female Elbow Adaptor Female O/D tube to female parallel BSP thread
G
J1
A
ØK
J
ØS B
Product number 36 0555 02 36 0555 03 36 0555 10 36 0555 11 36 0555 12 36 0555 20 36 0555 21 36 0555 22 36 0555 30 36 0555 31
A O/D stem 4 5 6 8 10 10 12 16 12 16
B thread BSPP
G
J A/F
J1
K
S
1
7,4 7,4 11,0 11,0 11,0 11,4 11,4 11,4 15,0 15,0
14,0 15,5 16,0 20,0 22,0 21,5 24,5 28,0 24,5 28,0
12,5 12,5 17,5 18,5 18,5 22,0 22,0 22,0 26,0 29,0
12,7 12,7 17,5 17,5 20,6 20,6 23,8 28,5 24,6 28,5
2,8 3,4 4,0 6,0 7,6 7,6 9,6 13,6 9,6 13,6
/8" /8" 1 /4" 1 /4" 1 /4" 3 /8" 3 /8" 3 /8" 1 /2" 1 /2" 1
N/AL 9.6.001.012
Our policy is one of continuous research and development. We therefore reserve the right to amend, without notice, the specifications given in this document.
06/97
Compression Fittings Metric Male Elbow Adaptor
Male Elbow Adaptor
Female O/D tube to male taper BSP thread
Female O/D tube to male NPTF thread
Product number 36 0005 02 36 0005 03 36 0005 04 36 0005 05 36 0005 08 36 0005 09 36 0005 10 36 0005 11 36 0005 12 36 0005 13 36 0005 18 36 0005 19 36 0005 20 36 0005 21 36 0005 22 36 0005 28 36 0005 29 36 0005 30 37 0005 57 36 0005 31 36 0005 45 37 0005 62
06/97
A O/D tube 4 5 6 8 4 5 6 8 10 12 6 8 10 12 16 8 10 12 15 16 16 18
G
G
J1
J1
A
ØK
J
A
ØK
J
ØS
ØS
B
B
K
K
B thread BSP
G
J
J1
K
S
Product number
1
9,5 9,5 9,5 9,5 11,11 11,11 11,11 11,11 11,11 11,11 12,7 12,7 12,7 12,7 12,7 15,9 15,9 15,9 15,9 15,9 19,0 19,1
14,9 16,5 16,5 20,0 15,7 16,5 17,2 20,6 21,0 22,2 18,2 21,8 22,0 24,5 25,8 23,4 24,9 25,4 27,0 28,0 29,0 31,0
15,5 17,0 18,2 20,0 19,8 19,8 19,0 21,0 23,0 25,0 24,0 24,0 24,0 26,0 28,0 28,5 28,5 33,0 32,0 32,0 34,5 37,5
11,1 12,7 14,3 15,9 14,3 14,3 14,3 15,9 20,6 23,8 17,4 17,4 20,6 23,8 28,6 23,8 23,8 28,6 28,6 28,6 28,6 31,8
4,7 4,7 4,7 4,7 6,3 6,3 6,3 6,3 6,3 6,3 9,6 9,6 9,6 9,6 9,6 12,7 12,7 12,6 12,7 12,7 17,5 17,5
36 0331 03 36 0331 04 36 0331 05 36 0331 09 36 0331 10 36 0331 11 36 0331 12 36 0331 13 36 0331 20 36 0331 21 36 0331 30 36 0331 31
/8" /8" 1 /8" 1 /8" 1 /4" 1 /4" 1 /4" 1 /4" 1 /4" 1 /4" 3 /8" 3 /8" 3 /8" 3 /8" 3 /8" 1 /2" 1 /2" 1 /2" 1 /2" 1 /2" 3 /4" 3 /4" 1
A O/D tube 5 6 8 5 6 8 10 12 10 12 12 16
B NPTF thread
G
J
J1
K
S
1
9,5 9,5 9,5 14,3 14,3 14,3 14,3 14,3 14,3 14,3 19,1 19,1
16,5 16,5 20,0 17,2 17,2 20,6 22,0 23,0 23,5 24,5 26,0 27,0
17,4 18,2 20,0 24,6 24,6 24,6 27,0 28,6 27,0 28,6 35,0 35,0
12,7 14,3 15,9 15,9 25,9 15,9 20,6 24,5 20,6 24,5 28,6 28,6
4,7 4,7 4,7 6,3 6,3 6,3 6,3 6,3 9,6 9,6 12,7 12,7
/8" /8" 1 /8" 1 /4" 1 /4" 1 /4" 1 /4" 1 /4" 3 /8" 3 /8" 1 /2" 1 /2" 1
Our policy is one of continuous research and development. We therefore reserve the right to amend, without notice, the specifications given in this document.
N/AL 9.6.001.013
Compression Fittings Metric Stem Tee Connector
90° Stem Tee Connector
Female O/D tube to O/D tube stem
Female O/D tube to O/D tube stem
J
90°
A
ØK
A
ØK
J
J
Product number 36 0550 03 36 0550 04 36 0550 05 36 0550 06 36 0550 07 36 0550 08 36 0550 10 36 0550 12
A O/D tube 5 6 8 10 12 16 22 28
J1
J1
J
ØS
ØS
A1
A1
A1 O/D stem 5 6 8 10 12 16 22 28
J
J1
K
S
Product number
14,5 16,8 18,5 21,0 22,5 27,5 38,0 45,0
29,5 30,6 34,9 41,3 43,5 55,0 60,0 75,0
14,3 14,3 17,5 23,3 23,0 35,0 35,0 45,0
3 4 5 7 9 12 18 23
36 0631 03 36 0631 04 36 0631 05 36 0631 06 36 0631 07
A O/D tube 5 6 8 10 12
A1 O/D stem 5 6 8 10 12
Side Stem Tee Connector
Tee Connector
Female O/D tube to O/D tube stem
Female O/D tube
J
J1
K
S
17 19 23 23 25
29,5 30,6 34,9 41,3 43,5
12,3 14,3 17,5 23,2 23,2
3 4 5 7 9
J
A
ØS
A
ØK
A1
J1
J1
J
ØS
J
J
A
A1
ØK
Product number 36 0626 03 36 0626 04 36 0626 05 36 0626 06 36 0626 07
A O/D tube 5 6 8 10 12
N/AL 9.6.001.014
A1 O/D stem 5 6 8 10 12
J
J1
K
S
Product number
17 19 23 24 26
29,5 30,6 34,9 41,3 43,5
12,3 14,3 17,5 23,0 23,0
3 4 5 7 9
36 0514 02 36 0514 03 36 0514 04 36 0514 05 36 0514 06 36 0514 07 36 0514 15 36 0514 08 36 0514 18 36 0514 10 36 0514 12
A O/D tube 4 5 6 8 10 12 15 16 18 22 28
A1 O/D stem 4 5 6 8 10 12 15 16 18 22 28
Our policy is one of continuous research and development. We therefore reserve the right to amend, without notice, the specifications given in this document.
J
J1
K
S
12,5 15,5 16,0 20,0 23,0 25,0 28,0 28,0 32,0 39,0 45,0
12,5 15,5 16,0 20,0 23,0 25,0 28,0 28,0 32,0 39,0 45,0
10,3 12,7 14,3 16,0 20,0 24,0 28,6 28,6 31,0 36,5 47,6
2,8 3,4 4,0 6,0 7,6 9,6 12,6 13,6 17,5 19,0 25,0
06/97
Compression Fittings Metric Bracketed Tee Connector
Male Tee Adaptor
Female O/D tube
Female O/D tube to male taper BSP thread J
J
J
J
A
J1 G
J
D
A
ØS
ØK
R
ØK
ØQ
ØS B
Product number 36 0549 02 36 0549 03 36 0549 04 36 0549 05 36 0549 06 36 0549 07
A1 O/D tube 4 5 6 8 10 12
D
J
K
Q
R
S
Product number
23,2 31,1 31,6 36,4 40,5 42,0
13,5 16,0 16,5 20,5 23,0 24,5
10,3 14,3 14,3 17,5 23,8 23,8
5,20 x 11,9 6,75 x 15,9 6,75 x 15,9 6,75 x 19,0 6,75 x 25,4 6,75 x 25,4
5,5 8,7 8,7 9,5 11,1 11,1
3,0 4,0 4,5 6,5 8,0 9,6
36 0627 03 36 0627 04 36 0627 11 36 0627 12 36 0627 21
A O/D tube 5 6 8 10 12
B thread BSP
G
J
J1
K
S
1
9,5 9,5 11,1 11,1 12,7
16,5 16,5 21,0 22,0 24,5
17,0 18,0 20,0 23,0 26,0
12,7 14,3 15,9 19,0 23,8
3,5 3,5 6,3 6,3 9,5
/8" /8" 1 /4" 1 /4" 3 /8" 1
Male Side Tee Adaptor
‘Y’ Connector
Female O/D tube to male taper BSP thread
Female O/D tube
J
J1
45°
45°
B
ØS
J
J1
J2
A
ØK
G
ØS
Product number 36 0628 03 36 0628 04 36 0628 11 36 0628 12 36 0628 21
06/97
A O/D tube 5 6 8 10 12
B thread BSP
G
1
9,5 9,5 11,1 11,1 12,7
/8" /8" 1 /4" 1 /4" 3 /8" 1
J
J1
J2
K
S
A ØK
15,5 16,0 20,0 23,0 25,0
17,0 18,5 22,0 23,0 27,0
15,5 16,0 20,0 23,0 25,0
12,7 14,3 15,9 19,0 23,8
3,5 4,0 6,0 6,4 9,6
Our policy is one of continuous research and development. We therefore reserve the right to amend, without notice, the specifications given in this document.
Product number 36 0558 02 36 0558 03 36 0558 04 36 0558 05 36 0558 06 36 0558 07 36 0558 08 36 0558 10 36 0558 12
A O/D tube 4 5 6 8 10 12 16 22 28
J
J1
K
S
14,0 15,0 16,0 18,5 20,5 22,0 25,0 32,0 40,0
14 16 17 20 22 24 29 37 45
11,1 12,7 14,3 17,5 23,8 23,8 31,8 35,7 44,5
2,8 3,4 4,0 6,0 7,6 9,6 13,6 19,0 25,0
N/AL 9.6.001.015
Compression Fittings Metric Four Way Connector
Connector Block
Female O/D tube U
J
U
U
J1
J D1
A
ØS
ØK
D2
J
J
A
ØQ R
J
R1 D
Product number 36 0516 02 36 0516 03 36 0516 04 36 0516 05 36 0516 06 36 0516 07 36 0516 08 36 0516 10 36 0516 12
A O/D tube 4 5 6 8 10 12 16 22 28
J
K
S
Product number
13,0 15,5 16,0 20,0 23,0 25,0 28,0 37,0 45,0
14,3 14,3 14,3 17,5 24,0 24,0 30,0 35,0 44,0
2,8 3,4 4,0 6,0 7,6 9,6 13,6 19,0 25,0
36 0202 02 36 0202 03 36 0202 04 36 0202 05 36 0202 06 36 0202 07
D
D1
D2
J
J1
Q
R
R1
U
24 26 32 32 42 46
12 13 16 16 21 23
23 27 27 34 36 38
11,5 13,5 13,5 17,0 18,0 19,0
6,0 6,5 8,0 8,0 10,5 11,5
5,4 5,4 6,5 6,5 8,3 8,3
12 13 16 16 21 23
-
12 13 16 16 21 23
Double Sided Manifold
U
D1
A1
D1
R2
J
J
R2
D2
A
D2
A
U
A O/D tube 4 5 6 8 10 12
*Other number of outlets available to special order
Single Sided Manifold U
No.* of outlets 2 2 2 2 2 2
A1 R
U
36 0304 28 36 0304 38 36 0304 49 36 0304 57 36 0304 65 36 0304 71
Inlet A O/D tube 8 8 12 12 16 16
Outlet A1 O/D tube 4 5 6 8 10 12
No. D of outlets
D1
D2
J
Q
R
R1
R2
U
Product number
4 4 4 4 4 4
16 16 23 23 29 29
25 25 31 33 40 40
17 17 20 22 26 26
6,5 6,5 6,5 8,3 8,3 8,3
60 63 76 76 95 105
6 6 6 8 8 8
6 6 6 8 8 8
12 13 16 16 21 23
36 0406 28 36 0406 38 36 0406 49 36 0406 57 36 0406 65 36 0406 71
72 75 88 92 111 121
Manifolds up to 12 outlets can be provided subject to minimum economic production quantity.
N/AL 9.6.001.016
R1
D
D
Product number
ØQ
R
ØQ
R1
U
Inlet A O/D tube 8 8 12 12 16 16
Outlet A1 O/D tube 4 5 6 8 10 12
No. D of outlets
D1
D2
J
Q
R
R1
R2
U
6 6 6 6 6 6
16 16 23 23 29 29
34 34 40 44 53 53
17 17 20 22 26,5 26,5
6,5 6,5 6,5 8,3 8,3 8,3
48 50 60 60 74 82
6 6 6 8 8 8
6 6 6 8 8 8
12 13 16 16 21 23
60 62 72 76 90 98
Manifolds up to 12 outlets can be provided subject to minimum economic production quantity.
Our policy is one of continuous research and development. We therefore reserve the right to amend, without notice, the specifications given in this document.
06/97
Compression Fittings Metric Hobbs Couplings
Hobbs Elbow Adaptor
The design of a Hobbs coupling allows the fittings to be screwed into a parallel BSP tapping and accurately located for position in both height and direction before it is secured with the special coned locknut and polyurethane seal. Wring locknut down metal to metal to create an effective seal.
Female O/D tube to male parallel BSP thread
E
B
B1
ØS
ØM
G
J1
Male parallel BSP thread both ends.
A
ØK
Hobbs Straight Connector
J
ØS B G1
G K D
Product number
B thread BSP
B1 thread BSP
D
E A/F
G
G1
M
S
Product number
36 0543 01 36 0543 02 36 0543 03 36 0543 04 36 0543 06 36 0543 08 36 0543 11 36 0543 20 36 0543 28 36 0543 36 36 0543 47
1
1
1
1
27,0 35,5 40,0 48,0 52,5 64,0 31,5 39,0 44,0 51,0 61,0
13 19 24 27 36 41 17 19 24 27 36
14,0 17,5 20,0 23,0 25,4 31,8 17,5 20,0 23,0 25,4 31,8
14,0 17,5 20,0 23,0 25,4 31,8 17,5 20,0 23,0 25,4 31,8
13 18 22 26 32 39 14 18 22 26 32
5,0 7,0 10,0 13,6 19,0 25,0 5,0 7,0 10,0 13,6 19,0
36 0541 02 36 0541 03 36 0541 04 36 0541 05 36 0541 08 36 0541 09 36 0541 10 36 0541 11 36 0541 12 36 0541 13 36 0541 18 36 0541 19 36 0541 20 36 0541 21 36 0541 22 36 0541 28 36 0541 29 36 0541 30 36 0541 31 36 0541 33 36 0541 45 36 0541 47 36 0541 49 36 0541 60 36 0541 62
/8" /4" 3 /8" 1 /2" 3 /4" 1" 1 /4" 3 /8" 1 /2" 3 /4" 1"
/8" /4" 3 /8" 1 /2" 3 /4" 1" 1 /8" 1 /4" 3 /8" 1 /2" 3 /4"
Hobbs Coned Locknut
A O/D tube 4 5 6 8 4 5 6 8 10 12 6 8 10 12 16 8 10 12 16 22 16 22 28 22 28
B thread BSP
G
J
J1
K
S
1
14,0 14,0 14,0 14,0 17,5 17,5 17,5 17,5 17,5 17,5 20,0 20,0 20,0 20,0 20,0 23,0 23,0 23,0 23,0 23,0 25,4 25,4 25,4 32,0 32,0
14,9 16,5 16,5 19,4 15,7 17,2 17,2 20,6 21,7 22,2 18,2 21,8 23,3 24,5 25,8 23,4 24,9 25,4 28,0 32,9 29,8 36,5 40,8 38,5 45,0
22,0 22,0 22,0 23,8 25,4 25,4 25,4 27,0 30,1 30,1 30,2 30,2 33,0 33,0 35,0 36,5 36,5 36,5 38,0 42,0 43,7 45,2 49,0 50,8 56,5
11,3 14,3 14,3 15,8 14,3 14,3 14,3 15,8 23,8 23,8 17,4 17,4 20,0 23,8 28,6 23,8 23,8 23,8 28,6 36,5 31,8 36,5 44,5 36,5 44,5
4,7 4,7 4,7 4,7 6,3 6,3 6,3 6,3 6,3 6,3 9,6 9,6 9,6 9,6 9,6 12,7 12,7 12,7 12,7 12,7 17,5 17,5 17,5 24,0 24,0
/8" /8" 1 /8" 1 /8" 1 /4" 1 /4" 1 /4" 1 /4" 1 /4" 1 /4" 3 /8" 3 /8" 3 /8" 3 /8" 3 /8" 1 /2" 1 /2" 1 /2" 1 /2" 1 /2" 3 /4" 3 /4" 3 /4" 1" 1" 1
Hobbs Seal
D
06/97
B thread BSP
D
E A/F
36 0540 02 36 0540 03 36 0540 04 36 0540 05 36 0540 06 36 0540 07
1
7,0 8,4 9,6 10,9 10,9 13,3
17 19 24 27 32 41
/8" /4" 3 /8" 1 /2" 3 /4" 1" 1
B
Product number
ØK
B
E
Female parallel BSP thread
D
Our policy is one of continuous research and development. We therefore reserve the right to amend, without notice, the specifications given in this document.
Product number
B thread BSP
D
E A/F
34 0156 02 34 0156 03 34 0156 04 34 0156 05 34 0156 06 34 0156 07
1
2 2,5 2,5 2,6 2,6 3,2
12,7 15,9 20,7 24,3 30,2 37,2
/8" /4" 3 /8" 1 /2" 3 /4" 1" 1
N/AL 9.6.001.017
Compression Fittings Metric Hobbs Tee Adaptor Female O/D tube to male parallel BSP thread J
G
J1
A
ØK
J
ØS B
Product number 36 0542 02 36 0542 03 36 0542 04 36 0542 05 36 0542 08 36 0542 09 36 0542 10 36 0542 11 36 0542 12 36 0542 13 36 0542 18 36 0542 19 36 0542 20 36 0542 21 36 0542 22 36 0542 28 36 0542 29 36 0542 30 36 0542 31 36 0542 33 36 0542 45 36 0542 47 36 0542 49 36 0542 60 36 0542 62
A O/D tube 4 5 6 8 4 5 6 8 10 12 6 8 10 12 16 8 10 12 16 22 16 22 28 22 28
B thread BSP
G
J
J1
K
S
1
14,0 14,0 14,0 14,0 17,5 17,5 17,5 17,5 17,5 17,5 20,0 20,0 20,0 20,0 20,0 23,0 23,0 23,0 23,0 23,0 25,4 25,4 25,4 32,0 32,0
14,9 16,5 16,5 19,4 15,7 17,2 17,2 20,6 21,7 22,2 19,0 21,8 23,3 24,5 25,8 23,4 24,9 25,4 28,0 32,9 29,8 36,5 40,8 38,5 45,0
22,0 22,0 22,0 23,8 25,4 25,4 25,4 27,0 30,1 30,1 30,2 30,2 33,0 33,0 35,0 36,5 36,5 36,5 38,0 44,0 43,7 45,2 50,0 51,3 56,5
14,3 14,3 14,5 15,8 14,3 14,3 14,3 15,8 23,8 23,8 17,4 17,4 23,8 23,8 28,5 23,8 23,8 23,8 28,5 36,5 31,8 36,5 44,5 36,5 44,5
4,7 4,7 4,7 4,7 6,3 6,3 6,3 6,3 6,3 6,3 9,6 9,6 9,6 9,6 9,6 12,7 12,7 12,7 12,7 12,7 17,5 17,5 17,5 24,0 24,0
/8" /8" 1 /8" 1 /8" 1 /4" 1 /4" 1 /4" 1 /4" 1 /4" 1 /4" 3 /8" 3 /8" 3 /8" 3 /8" 3 /8" 1 /2" 1 /2" 1 /2" 1 /2" 1 /2" 3 /4" 3 /4" 3 /4" 1" 1" 1
N/AL 9.6.001.018
Our policy is one of continuous research and development. We therefore reserve the right to amend, without notice, the specifications given in this document.
06/97
Compression Fittings Metric
A thread
36 0500 02 36 0500 03 36 0500 04 36 0500 05 36 0500 06 36 0500 07 37 0500 15 36 0500 08 37 0500 18 36 0500 10 36 0500 12
M8 x 1,0 M10 x 1,0 M11 x 1,0 M13 x 1,0 M15 x 1,0 M18 x 1,5 M22 x 1,5 M24 x 1,5 M26 x 1,5 M30 x 1,5 M38 x 1,5
B O/D tube 4 5 6 8 10 12 15 16 18 22 28
D E A/F
H
9,5 10,0 10,5 12,1 13,3 15,7 17,0 17,1 19,5 21,5 24,5
8,0 7,0 8,0 9,0 9,5 10,0 10,0 11,0 12,0 15,0 18,0
8 10 13 13 17 19 22 24 27 30 41
B
B
A
E
H D
Product number
ØK
‘O’-Ring Seal
Tubing Nut
ØD
Product number
A for BSP thread
D
K
48 0261 06 48 0261 06 48 0261 06 48 0261 06 48 0261 06 48 0261 06
1
2,1 2,1 2,1 2,5 2,5 2,5
16,0 20,6 23,8 28,6 31,7 34,9
/8" /4" 3 /8" 1 /2" 5 /8" 3 /4" 1
The ‘O’-ring seals shown on this page are suitable for use with our metric range of parallel threaded adaptors.
For ‘A’ thread details refer to page 9.6.001.03.
Folded Copper Washer
Universal Tubing Sleeve
ØA
ØK
ØA
ØK
Suitable for nylon metallic tubing
D D
Product number
A
48 0213 01 48 0213 02 48 0213 03 48 0213 04 48 0213 05 48 0213 06 48 0213 07 48 0213 08 48 0213 09 48 0213 27 48 0213 28 48 0213 29 48 0213 30 48 0213 41 48 0213 42 48 0213 43
9,8 13,2 16,7 21,0 23,0 26,5 30,2 33,3 42,0 11,1 12,7 14,3 19,1 8,3 10,3 12,1
Suitable for BSP thread 1
/8" /4" 3 /8" 1 /2" 5 /8" 3 /4" 7 /8" 1" 11/4" 1
-
or metric thread M16 M30 M33 M14 M8 M10 M12
D
K
Product number
1,5 1,5 1,5 1,5 1,8 1,8 1,8 1,8 2,2 1,5 1,5 1,5 1,5 1,5 1,5 1,5
13,5 17,7 21 26,4 28,6 32,4 36,2 38,9 49,9 14,6 17,7 18,5 24,1 12 14 17
36 0501 02 36 0501 03 36 0501 04 36 0501 05 36 0501 06 36 0501 07 37 0501 15 36 0501 08 37 0501 18 36 0501 10 36 0501 12
or imperial thread 3
/8" x 24TPI
7
/16" x 24TPI /2" x 24TPI 9 /16" x 24TPI 3 /4" x 24TPI 1
-
Sealing Washers – for use with banjo fitting
A O/D tube 4 5 6 8 10 12 15 16 18 10 28
D
K
4,2 5,2 5,5 6,3 7,0 7,7 9,1 9,0 10,1 10,5 13,2
6,4 7,5 8,5 10,5 13,0 15,5 19,5 20,0 23,0 26,5 33,0
D
K
4,6 5,0 5,5 6,3 7,5 7,5 9,0
5,7 6,8 8,0 10,3 12,6 14,9 18,3
Tubing Sleeve Suitable for metallic tubing only
Material
48 0314 00 48 0314 00 48 0314 00 48 0314 00 48 0314 00
M5
Nylon Copper Copper Copper Copper
Product number
Nylon
1
/8" 1 /4" 3 /8" 1 /2"
ØA
Size
ØK
Product number
D
36 0502 02 36 0502 03 36 0502 04 36 0502 05 36 0502 06 36 0502 07 37 0502 15
A O/D tube 4 5 6 8 10 12 15
Copper
06/97
Our policy is one of continuous research and development. We therefore reserve the right to amend, without notice, the specifications given in this document.
N/AL 9.6.001.019
Compression Fittings Metric Elbow Banjo Assembly
Elbow Banjo Assembly
Non Regulating BSPP Bolt Female O/D tube to male parallel BSP thread
Regulating BSPP Bolt Female O/D tube to male parallel BSP thread
D
D E
BS
D1
D1
A
ØS
A
E
F
G
G
F
B B
Product number 36 0385 02K 36 0385 03K 36 0385 04K 36 0385 05K 36 0385 10K 36 0385 11K 36 0385 12K 36 0385 19K 36 0385 20K 36 0385 21K 36 0385 29K 36 0385 30K
A O/D tube 4 5 6 8 6 8 10 8 10 12 10 12
B thread BSPP
D*
1
32 35 35 39 38 42 44 48 49 50 54 56
/8" /8" 1 /8" 1 /8" 1 /4" 1 /4" 1 /4" 3 /8" 3 /8" 3 /8" 1 /2" 1 /2" 1
D1
29 29 29 29 33 33 33 41 41 41 49 49
E A/F
F
14 14 14 14 17 17 17 22 22 22 27 27
8 10 13 13 13 13 17 13 17 19 17 19
G
S
A/F
6,5 6,5 6,5 6,5 7,5 7,5 7,5 10,0 10,0 10,0 14,0 14,0
2,8 3,4 4,0 6,0 4,0 6,0 7,6 6,0 7,6 9,6 7,6 9,6
Product number
A O/D tube 5 8 8
36 0386 03K 36 0386 05K 36 0386 11K
B thread BSPP
D*
1
35 39 42
/8" /8" 1 /4" 1
D1
34 34 36,5
E A/F
F
14 14 17
10 13 13
G
S
6,5 6,5 7,5
3,4 6,0 6,0
A/F
*This dimension will vary with torque applied and is for guidance only. Arrow on bolt hexagon indicates free flow direction.
*This dimension will vary with torque applied and is for guidance only.
Tee Banjo Assembly
Elbow Banjo Body
Non Regulating BSPP Bolt Female O/D tube to male parallel BSP thread
O/D tube
D
D E
ØS
E A
ØS
C
A
F
G
D1
A
B
F B
Product number 36 0395 03K 36 0395 04K 36 0395 10K 36 0395 11K 36 0395 12K 36 0395 19K
A O/D tube 5 6 6 8 10 8
B thread BSPP
D*
1
53 54 56 64 68 70
/8" /8" 1 /4" 1 /4" 1 /4" 3 /8" 1
D1
29 29 33 33 33 41
E A/F
F
14 14 17 17 17 22
10 13 13 13 17 13
G
S
6,5 6,5 7,5 7,5 7,5 10,0
3,4 4,0 4,0 6,0 7,6 6,0
A/F
*This dimension will vary with torque applied and is for guidance only.
Product number
A O/D tube 36 0384 02K 4 36 0384 03K 5 36 0384 04K 6 36 0384 05K† 8 36 0384 10K 6 36 0384 11K 8 36 0384 12K† 10 36 0384 19K 8 36 0384 20K 10 36 0384 21K 12 36 0384 29K 10 36 0384 30K 12
B for BSP bolt
C
D*
E
F
S
1
14,0 14,0 14,0 16,0 16,0 16,0 18,5 20,5 20,5 21,5 22,0 22,0
32 35 35 39 38 42 44 48 49 50 54 56
11,5 13,0 14,0 16,0 14,0 16,0 18,5 17,0 18,5 21,5 18,5 21,5
8 10 13 13 13 13 17 13 17 19 17 19
2,8 3,4 4,0 6,0 4,0 6,0 7,6 6,0 7,6 9,6 7,6 9,6
/8" /8" 1 /8" 1 /8" 1 /4" 1 /4" 1 /4" 3 /8" 3 /8" 3 /8" 1 /2" 1 /2" 1
*This dimension will vary with torque applied and is for guidance only. † To double stack these bodies order longer bolts 36 0452 11K or 36 0452 12K, see below.
N/AL 9.6.001.020
Our policy is one of continuous research and development. We therefore reserve the right to amend, without notice, the specifications given in this document.
06/97
Compression Fittings Metric Banjo Bolts – Regulating
Tee Banjo Body O/D tube
Regulating Out Male parallel BSP thread
D
A A
C
F
Product number
A O/D tube 36 0394 03K 5 36 0394 04K 6 36 0394 10K 6 36 0394 11K 8 36 0394 12K† 10 36 0394 19K 8
B thread BSP
D1
E A/F
39 0461 01K 39 0461 02K 39 0461 03K 39 0461 04K
1
34 37 52 58
14 17 22 27
/8" /4" 3 /8" 1 /2" 1
Regulating In Male parallel BSP thread
B for BSP bolt
C
D*
E
F
S
1
14,0 14,0 16,0 16,0 18,5 20,5
53 54 56 64 68 70
13,0 14,0 14,0 16,0 18,5 17,0
10 13 13 13 17 13
3,4 4,0 4,0 6,0 7,6 6,0
/8" 1 /8" 1 /4" 1 /4" 1 /4" 3 /8"
Product number ØS
E
B
Product number
B thread BSP
D1
E A/F
39 0460 01K 39 0460 02K 39 0460 03K 39 0460 04K
1
34 37 52 58
14 17 22 27
/8" /4" 3 /8" 1 /2" 1
Bi-Directional Flow Male parallel BSP thread
* This dimension will vary with torque applied and is for guidance only. † To double stack this body order longer bolt 36 0452 12K, see below.
Product number
B thread BSP
D1
E A/F
39 0459 01K 39 0459 01K 39 0459 01K 39 0459 01K
1
34 37 52 58
14 17 22 27
/8" /4" 3 /8" 1 /2" 1
All banjo bolts supplied complete with sealing washers. Arrow on bolt hexagon indicates free flow direction.
Banjo Bolts - Non Regulating Single stacking Male parallel BSP thread
Double stacking Male parallel BSP thread
D1
E
ØS
36 0451 01K 36 0451 02K 36 0451 03K 36 0451 04K
B D1 thread BSP 1 /8" 29 1 /4" 33 3 /8" 41 1 /2" 49
E A/F
S
14 17 22 27
4,5 5,5 9,2 10,5
Product number E
D1
Product number
All banjo bolts supplied complete with sealing washers.
B ØS
36 0452 01K 36 0452 02K 36 0452 03K 36 0452 04K 36 0452 11K* 36 0452 12K*
B D1 thread BSP 1 /8" 44,0 1 /4" 50,0 3 /8" 62,5 1 /2" 74,0 1 /8" 47,5 1 /4" 55,0
E A/F
S
14 17 22 27 14 17
4,5 5,5 9,2 10,5 4,5 5,5
*To be used only with bodies marked †, see tables above.
B
Warning These products are intended for use in industrial compressed air systems only. Do not use these products where pressures and temperatures can exceed those listed under ‘Technical Data’. Before using these products with fluids other than those specified, for non-industrial applications, life-support systems, or other applications not within published specifications, consult Norgren. Through misuse, age, or malfunction, components used in fluid power systems can fail in various modes. The system designer is warned to consider the failure modes of all component parts used in fluid power systems and to provide adequate safeguards to prevent personal injury or damage to equipment in the event of such failure. System designers must provide a warning to end users in the system instructional manual if protection against a failure mode cannot be adequately provided. System designers and end users are cautioned to review specific warnings found in instruction sheets packed and shipped with these products where applicable.
06/97
Our policy is one of continuous research and development. We therefore reserve the right to amend, without notice, the specifications given in this document.
N/AL 9.6.001.021