Página 1 de 5
KF Guide MERKEL Piston Guide Band, PTFE/Bronze Strip Merkel Piston Guide TBandsape material is designed for hydraulic and pneumatic equiptment. It's unigue design prevents equiptment seizures which can arrise with other forms of guidance materials. Merkel Guide Bands offer Max. Temp (F°): 250 extremely low friction and break-away forces. This material is also resistant to all hydraulic fluids, and is suitable for Speed (ft/s): 16 temporatures up to 120C/ 250F.
8000
DISOGRIN VERLON 'COOL BLUE' Ultra-Precision PISTON Wear Ring 8000 Series VERLON II 'COOL BLUE' Ultra-Precision are precisely processed, specially formulated thermoplastic resin with high compressive strength and load bearing capabilities. VERLON II low friction 'COOL BLUE' Wear Rings are long wearing, non-scoring and internally Max. Temp (F°): 275 lubricated, designed for PISTON applications. Cross section .062", .080", .125"+T18, 1,5mm-2,5mm-3,0mm. Width range .250" to 5.000". All cross section finished to Speed (ft/s): 6 tolerance of +/-.001".
SF Guide MERKEL Rod Guide Band, PTFE/Bronze Strip Merkel Rod Guide Band material is designed for hydraulic and pneumatic equiptment. It's unigue design prevents equiptment seizures which can arrise with other forms of guidance materials. Merkel Guide Bands offer extremely low friction and break-away forces. This material is also resistant to all hydraulic fluids, and is suitable for temporatures up to 120C/ 250F.
8001
Max. Temp (F°): 250 Speed (ft/s): 16
DISOGRIN VERLON 'COOL BLUE' Ultra-Precision ROD Wear Ring 8001 Series VERLON II 'COOL BLUE' Ultra-Precision precisely processed, specially formulated engineered thermoplastic resin are long wearing, non-scoring and internally lubricated, designed for rod applications. Cross Max. Temp (F°): 275 section .062", .080", .125", 1.5mm-2.5mm-3.0mm. Width .250" to 5.000". Cross section finished to tolerance Speed (ft/s): 6 +/-.001".
KF Guide Ring
MERKEL Piston Guide Band, Phenolic Resin Merkel Phenolic Resin Bonded Fabric Guide Bands are designed to be extremely robust and carry very heavy sideloads up to 270 M/mm. These guide bands also offer very good thermal stability & low water absorbtion. The Cotton fabric is typically used in diameters < 300mm/ Max. Temp (F°): 250 12.00", and Polyester is more commonly used for larger sizes and may be supplied in strip form. Merkel Resin Bonded Fabric Guide Bands are supplied with chamfers Speed (ft/s): 3 on all sides to allow for better fit and service life.
Página 2 de 5
7000
DISOGRIN VERLIN 'No Swell' Ultra-Precision PISTON Wear Ring 7000 Series VERLIN NO SWELL are manufactured from high compressive strength, low friction, non moisture swelling, co-polymer acetal for PISTON APPLICATIONS. Max. Temp (F°): 200 Series 7000 have 30% more bearing area than conventional wear rings. VERLIN compounds quite noisy Speed (ft/s): 6 pneumatic or hydraulic systems.
SF Guide Ring
MERKEL Rod Guide Band, Phenolic Resin Merkel Phenolic Resin Bonded Fabric Guide Bands are designed to be extremely robust and carry very heavy sideloads up to 270 M/mm. These guide bands also offer very good thermal stability & low water absorbtion. The Cotton fabric is typically used in diameters < 300mm/ Max. Temp (F°): 250 12.00", and Polyester is more commonly used for larger sizes and may be supplied in strip form. Merkel Resin Bonded Fabric Guide Bands are supplied with chamfers Speed (ft/s): 3 on all sides to allow for better fit and service life.
7001
DISOGRIN VERLIN 'No Swell' Ultra-Precision ROD Wear Ring 7001 Series VERLIN NO SWELL manufactured from very high compressive strength, low friction, non moisture swelling co-polymer acetal, designed for rod applications Max. Temp (F°): 200 have 30% more bearing area than convention wear rings. VERLIN compounds quite noisy pneumatic or hydraulic Speed (ft/s): 6 systems. All cross section finished to tolerance +/-.001".
6000
DISOGRIN VERLON III+ 'No Swell' Ultra-Precision PISTON Wear Ring 6000 Series VERLON III+ NO SWELL are manufactured from very high compressive strength, low friction, non moisture swelling HTN (High temperature Nylon), reinforced with carbon fiber and designed for PISTON Max. Temp (F°): 300 APPLICATIONS. Series 6000 have 30% more bearing area than conventional wear rings. Cross section finished Speed (ft/s): 6 to tolerance +/-.001".
6001
DISOGRIN VERLON III+ 'No Swell' Ultra-Precision ROD Wear Ring 6001 Series VERLON III+ NO SWELL manufactured from very high compressive strength, low friction, non moisture swelling HTN. (High temperature Nylon), reinforced with carbon fiber are designed for rod applications. Series Max. Temp (F°): 300 6001 have 30% more bearing area than conventional
Página 3 de 5
wear rings and operate at 100 F higher than standard Nylon compounds. Cross section finished to tolerance +/.001".
FRA
Speed (ft/s): 6
SIMRIT Piston Guide Ring Non-metallic guide component for rods for standardised housings, amongst others, according to ISO 10766. No seizure through material pairing metal/plastic. Medium loadMax. Temp (F°): 212 bearing capacity. chamfered profile edges prevent edgepressure in the corner radii of the housing groove. Simple Speed (ft/s): 3 snap-in fitting.
5000
DISOGRIN VERLON III 'No Swell' Ultra-Precision PISTON Wear Ring 5000 Series VERLON III NO SWELL piston rings are manufactured from very high compressive strength, low friction, non moisture swelling HTN. (High temperature Nylon). Series 5000 Ultra-Precision have 30% more bearing area than convention wear rings and operate at 100 degrees F higher than standard Nylon compounds. Cross section finished to tolerance of +/-.001".
FRI
Max. Temp (F°): 300 Speed (ft/s): 6
SIMRIT Rod Guide Ring. Non-metallic guide component for rods for standardised housings, amongst others, according to ISO 10766. No seizure through material pairing metal/plastic. Medium loadMax. Temp (F°): 212 bearing capacity. chamfered profile edges prevent edgepressure in the corner radii of the housing groove. Simple Speed (ft/s): 3 snap-in fitting.
5001
DISOGRIN VERLON III 'No Swell' Ultra-Precision ROD Wear Ring 5001 Series VERLON III NO SWELL manufactured from very high compressive strength, low friction, non moisture swelling HTN (High temperature Nylon), designed for ROD APPLICATIONS have 30% more bearing area than Max. Temp (F°): 300 convention wear rings. VERLON III compounds operate 100 F higher than standard Nylon compounds. Cross Speed (ft/s): 6 section finished to tolerance of +/-.001".
EKF
SIMRIT Split, non-metallic piston guide ring. Filled Polyamide. Non-metallic guide component for pistons. For new designs we recommend modern design series
Max. Temp (F°): 212 Speed (ft/s): 3
Página 4 de 5
2000
DISOGRIN VERLON Ultra-Precision PISTON Wear Ring 2000 Series VERLON Ultra-Precision precisely processed, specially formulated engineered thermoplastic resin are long wearing, non-scoring and internally lubricated, designed for PISTON APPLICATIONS . Cross Max. Temp (F°): 275 sections .062", .080", .125", 1.5mm-2.5mm-3.0mm. Width range .250" to 5.000". Cross section finished to tolerance Speed (ft/s): 6 +/-.001".
2001
DISOGRIN VERLON Ultra-Precision ROD Wear Ring 2001 Series VERLON Ultra-Precision precisely processed, specially formulated engineered thermoplastic resin are long wearing, non-scoring and internally lubricated, designed for piston applications. Cross Max. Temp (F°): 275 sections .062", .080", .125", 1.5mm-2.5mm-3.0mm. Width .250" to 5.000". Cross section finished to tolerance Speed (ft/s): 6 +/-.001".
1900
DISOGRIN Piston Wear Ring 1900 Series VERLON precisely processed, specially formulated engineered thermoplastic resin with high compressive strength and load bearing capabilities. VERLON Series 1900 are long wearing, non-scoring and Max. Temp (F°): 275 internally lubricated and designed for PISTON APPLICATIONS. Cross sections .062, .080, .125, 1.5mm2.5mm-3.0mm. Width range .250" to 1.000". Most Speed (ft/s): 6 economical wear ring available.
1901
DISOGRIN Rod Wear Ring 1901 Series VERLON precisely processed, specially formulated engineered thermoplastic resin are long wearing, non-scoring and internally lubricated, designed Max. Temp (F°): 275 for ROD APPLICATIONS. Cross sections .062, .080, .125, 1.5mm-2.5mm-3.0mm. Width range .250" to 1.000". Most Speed (ft/s): 6 economical wear ring available.
Guivex
MERKEL Guivex Piston Guide band Max. Temp (F°): 250
Guivex
MERKEL Guivex Rod Guide band Max. Temp (F°): 250
Copyright© 2003 Simrit. All rights reserved.
Terms of Use
Images Description Image
Image
Description
Bull Dozer
Manipulators
Fork Lift
Buffer Seal
Tractor
Valves
Stabiliser
Shears
Hydraulic Presses
Hydraulic Jacks
Mobile Arms
Forging
General Cylinder
Heavy Duty Construction
Injection Molding
Heavy Duty Applications
Mobile Lifts
Rolling Mills
Steel Mill
Rotary Seal
Compression Molding
Cranes
Marine Applications
CNC Machines