ASKAYNAK CleanArc®
Fume Extraction Systems
ASKAYNAK Kaynak Tekniği Sanayi ve Ticaret A.Ş.
Specializing in the manufacturing of covered electrodes, Kaynak Tekniği Sanayi ve Ticaret A.Ş. was founded on March 1, 1974. With the onset of the 1980s, the company started manufacturing MIG/MAG welding wires. In 1982, Kaynak Tekniği became the Turkish distributor of the USA based “The Lincoln Electric Company”, headquartered in Cleveland, Ohio, and a leader in the manufacturing of welding equipment. On May 5, 1998 a fifty-fifty partnership was established with The Lincoln Electric Company. As a result of this joint venture, an important step to expand the company’s market share and exports to Europe, Russia, Africa and The Middle East was established. The Lincoln Electric Co., the foreign partner of the joint venture, is one of the leading company worldwide specializing in the manufacturing of welding consumable products, welding equipment, welding generators, robotic automation and plasma cutting equipment. The company has joint ventures in 18 countries and a worldwide network of distributors and sales offices in approximately 160 countries. Under the brand “Askaynak”, Kaynak Tekniği manufactures welding electrodes and welding wires primarily used by the welding manufacturing industry, while the “Kobatek” brand of products were developed to be primarily utilized during welding repair and maintenance processes. Additionally, Kaynak Tekniği distributes the “Lincoln Electric” brand of welding electrodes, welding wires, welding equipment, etc. of its partner The Lincoln Electric Company throughout Turkey. In the 2000s, Kaynak Tekniği registered its brand “Starweld” which includes stainless steel and aluminum MIG and TIG welding wires and flux-cored welding wires. The “Expressweld” brand of welding equipment is another significant product line sold under the Kaynak Tekniği umbrella. Besides the welding equipment and consumable products available within the “Askaynak” brand abrasives, “Harris” and “Askaynak by Harris” brand gas equipment are also offered. As a result of the rising market conditions and rapid growth in sales, Kaynak Tekniği moved from its plant located in the district of Kartal inIstanbul since 1974 to its new and modern manufacturing facility in Kocaeli in 2007. Located in the district of Çayırova, within the borders of the Municipality of Şekerpınar, the manufacturing facility and headquarters is located on 40,000 square meters of land with an indoor area of 22,000 square meters. In operation since 1974, Kaynak Tekniği has a capacity to produce 36,000 tons of covered electrodes, 24,000 tons of flux-cored welding wires, 5,000 tons of submerged arc welding wires and 1,500 tons of TIG welding wires on an annual basis. The company has a total of 4 sales offices in Istanbul, Ankara, Izmir and Adana, employs approximately 450 peoples and has about 800 authorized dealers throughout Turkey. Kaynak Tekniği maintains a strong presence in the Turkish market and all products manufactured and introduced to its targeted audience are recognized for their superior quality. Additionally, the company continues to increase its export capacity each year: in 2015, sales were realized in over 70 countries worldwide. The major fundamental principle at Kaynak Tekniği is to attain a high level of customer satisfaction. As a result, the company strives to ensure that the demands of the market are met and is committed to offering top quality products and services to all customers. In 1995, Kaynak Tekniği was the first welding company to receive the “ISO 9001 Quality Management System” Certificate in Turkey. Further, Kaynak Tekniği has received Lloyd certification from American Bureau of Shipping (ABS), Bureau Veritas (BV), Lloyd Register of Shipping (LRS), Germanischer Lloyd (GL), Det Norske Veritas (DNV), Türk Loydu (TL), Russian Maritime Register of Shipping (RMRS) and Registro Italiano Navale (RINA). Additionally, the company’s products have been approved by leading cer tification organizations to include TSE, TÜV, DB, GOST, NAKS, and SEPRO. Finally, Kaynak Tekniği Sanayi ve Ticaret A.Ş. is the first welding company to receive the “CE” certificate in Turkey. In 1999, Kaynak Tekniği received the “ ” in the category of small and mid-sized companies awarded in partnership with TÜSIAD (Turkish Industrialists and Businessmen’s Association) and KalDer (Turkish Society for Quality) once again confirming the company’s commitment for providing superior quality products and services.
Contents CleanArc M100 MOBILE FILTER UNIT.......................................................................................................... 314-315 CleanArc M100E MOBILE FILTER UNIT .................................................................................................... 316-317 CleanArc M200 MOBILE FILTER UNIT ....................................................................................................... 318-319 CleanArc MC100 MOBILE FILTER UNIT (Self-Cleaning) ...............................................................................320-321 CleanArc MC200 MOBILE FILTER UNIT (Self-Cleaning) ............................................................................ 322-323 CleanArc SC100 MOBILE FILTER (Self-Cleaning)....................................................................................... 324-325 CleanArc SELF SUPPORTING FUME EXTRACTION ARMS............................................................................ 326-327 CleanArc Mini 125 SELF SUPPORTING FUME EXTRACTION ARMS .................................................................... 328 CleanArc Midi 160 SELF SUPPORTING FUME EXTRACTION ARMS .................................................................... 329 CleanArc Maxi 200 SELF SUPPORTING FUME EXTRACTION ARMS.................................................................... 330 CleanArc Tele 160 TELESCOPIC FUME EXTRACTION ARMS................................................................................ 331 CleanArc Midi 160 EXTENSION BOOMS ..................................................................................................... 332-333 CleanArc Maxi 200 EXTENSION BOOMS .................................................................................................... 334-335 CleanArc Eco 160 FUME EXTRACTION ARM...................................................................................................... 336
Liability: All information in this catalog is based on the best available knowledge, is subject to change without notice and can only be considered as suitable for general guidance. Fumes: Consult information on Welding Safety Sheet, available upon request.
313
CleanArc® Mobile Fume Extraction Systems CleanArc M100 MOBILE FILTER UNIT CleanArc M100 mobile filter unit is a compact fume extraction and filtering unit designed for efficiently filtering the welding fume in environments where welding is performed. Since the air that is output from the unit is respirable clear air, it can be conveniently used especially in processes being performed locally in facilities such as welding, cutting and polishing of metal, ceramic and plastic parts that produces intense fume and dust after the process.
CleanArc M100, which can be equipped with 2 or 3 meters fume extraction arms, is manufactured from steel material as a standard and is sold together with highly durable self supporting type CleanArc extraction arms. In addition, it can also be equipped with CleanArc ECO 160 extraction arms as a more affordable option.
In case minor sparks are extracted during processes such as welding and grinding, fire risk is prevented thanks to spark arrester located before the main filter unit. Since the main body, which is manufactured as monoblock from a highly durable material, and other metallic equipment are painted with powder coating, CleanArc M100 filtering unit system will provide long service life by making no concessions to its durability. CleanArc M100 also indicates the user for replacing the filter through its built-in filter warning system and operating hours counter.
314
Liability: All information in this catalog is based on the best available knowledge, is subject to change without notice and can only be considered as suitable for general guidance. Fumes: Consult information on Welding Safety Sheet, available upon request.
M100
STANDART EQUIPMENT Product Code
Product Name
Description
81CAM100
CleanArc M100
Fume extraction main unit
82CAMIDI160-3M-M
CleanArc Midi 160 (Mobile unit type , 3m)
Self supporting fume extraction arm (3 m)
82CAM100-F7
Filtre F7
Filter
TECHNICAL DATA Nominal air flow
m3/h
1200
Weight
kg
102
Power Source
V/Hz
3x400/50
Motor Power
kW
1,1
Prefilter
Spark arrester
Main Filter
F7 Cartridge Filter
OPTIONAL FEATURES 82CAECO160-2M-M
CleanArc Eco 160 (Standing type , 2 m)
Hose arm - 160 mm diamete r - 2 m
82CAECO160-3M-M
CleanArc Eco 160 (Standing type , 3 m)
Hose arm - 160 mm diameter - 3 m
82CAMIDI160-2M-M
CleanArc Midi 160 (Standing type , 2 m)
82CAMINI125-ARCSENSE
CleanArc Mini, Midi, Maxi Arc Sense kit
82CAMINI125-LIGHTKIT
C leanArc Mini, Midi, Maxi Light kit
Self supportingarm - 160 mm diameter - 2 m This kit automatically turns on the system by sensing welding arc. Light kit for fume extractor
82CAM100-F9
CleanArc M100 Filter F9
F9 quality cartridge filter
82CAM100-SPARK
CleanArc M100 Spark Arrester
Spark arrester as metal mesh
APPLICATIONS • In the areas within the facilities where air filtering system does not exist • For rapidly extracting the fume from indoor areas • For extracting solder fume • In dental applications • In places where plastic welding and cutting procedures are performed • In all welding, cutting and grinding applications
FEATURES • 1200 m3/h air purifying capacity • 1,1 kw aluminum radial fan • Double-stage filtering • Easy filter cleaning • Monoblock steel construction • Used together with extraction arm in 160 mm (6” ) diameter Liability: All information in this catalog is based on the best available knowledge, is subject to change without notice and can only be considered as suitable for general guidance. Fumes: Consult information on Welding Safety Sheet, available upon request.
315
CleanArc® Mobile Fume Extraction Systems CleanArc M100E MOBILE FILTER UNIT CleanArc M100E mobile filter unit is a compact fume extraction and filtering unit designed for efficiently filtering the welding fume . CleanArc M100E has 3 stage filter casette that can
Operating with monophase electricity, CleanArc M10 0 E c a n b e u s e d c o n v e nie n t l y in a ll repair&maintenance shops, ceramic processing and small welding shops.
filter the finest particals in the air. , the fume extraction unit has a filter warning lamp and operating hour indicator.
Designed for hassle-free operation for long years without any maintenance, CleanArc M100E carry a 2year Parts & Labor warranty.
CleanArc M100E can be equipped with 2 or 3 meter CleanArc Eco160 ex traction arms in delivery. In addition, for improving the performance CleanArc self supporting fume extraction arms can also be used as an option.
316
Liability: All information in this catalog is based on the best available knowledge, is subject to change without notice and can only be considered as suitable for general guidance. Fumes: Consult information on Welding Safety Sheet, available upon request.
STANDART EQUIPMENT Product Code
Product Name
Description
81CAM100E
CleanArc M100E
Fume extraction main unit
82CAECO160-2M-M
CleanArc Eco 160 (Mobile unit type , 2 m)
Fume extraction arm (3 m)
82CAM100E-F9
Filtre F9
CleanArc M100E fiberglass filter F9
82CAM100E-M5
Filtre M5
CleanArc M100E polyester filter M5
82CAM100E-G2
Filtre G2
CleanArc M100 fiber filter G2
TECHNICAL DATA Nominal air flow
m3/h
1200
Weight
kg
91
Power Source
V/Hz
230/50
Motor Power
kW
0,75
Filter Type
Main filter
F9
Filter
M5
Filter
G2
OPTIONAL FEATURES 82CAECO160-2M-M
CleanArc Eco 160 (Standing type , 2 m)
Hose arm - 160 mm diameter - 2 m
82CAMIDI160-3M-M
CleanArc Midi 160 (Standing type , 3 m)
Hose arm - 160 mm diameter - 3 m
82CAMIDI160-2M-M
CleanArc Midi 160 (Standing type , 2 m)
82CAMINI125-ARCSENSE
CleanArc Mini, Midi, Maxi Arc Sense kit
82CAMINI125-LIGHTKIT
C leanArc Mini, Midi, Maxi Light kit
Self Supporting- 160 mm diameter - 2 m This kit automatically turns on the system by sensing welding arc. Light kit for fume extractor
Applications • In the areas within the facilities where air filtering system does not exist • For rapidly extracting the fume from indoor areas • For extracting solder fume • In dental applications • In places where plastic welding and cutting procedures are performed • In all welding, cutting and grinding applications
FEATURES • 1200 m3 /hour air purfying capacity • 0.75 kw aluminum radial fan • Three-stage filtering • Easy filter cleaning • Filter warning lamp for replacing • Monoblock steel construction • Can be used together with CleanArc Midi 160 or CleanArc Eco 160 extraction arms Liability: All information in this catalog is based on the best available knowledge, is subject to change without notice and can only be considered as suitable for general guidance. Fumes: Consult information on Welding Safety Sheet, available upon request.
317
CleanArc® Mobile Fume Extraction Systems CleanArc M200 MOBILE FILTER UNIT
CleanArc M200 filter unit is a portable fume extraction system that enables operation with double fume ex traction arms. T hank s to it ’s e asy use filter replacement and durable design CleanArc M200 works for year without any maintenance for a year CleanArc M200, which can be equipped with 2 or 3 meters self supporting fume arms.In addition, it can also be used with CleanArc ECO 160 supported with spiral steel wire as a more affordable option.
318
Liability: All information in this catalog is based on the best available knowledge, is subject to change without notice and can only be considered as suitable for general guidance. Fumes: Consult information on Welding Safety Sheet, available upon request.
STANDART EQUIPMENT Product Code 81CAM200 82CAMIDI160-3M-M 82CAM200-F7
Product Name CleanArc M200 CleanArc Midi 160 (Mobile unit type, 3 m) (2 units should be ordered) Filtre F7
Description Fume extraction main unit Mechanical fume extraction arm (3 m) (2 units should be ordered) Filter
TECHNICAL DATA Nominal air flow
m3/h
2000
Weight
kg
85
Power Source
V/Hz
3x400/50
Motor Power
kW
2,2
Prefilter
Spark arrester
Main filter
F7 Cartridge Filter
OPTIONAL FEATURES 82CAECO160-2M-M
CleanArc Eco 160 (Standing Type 2 m)
Hose arm - 160 mm diameter - 2 m
82CAECO160-3M-M
CleanArc Eco 160 (Standing Type, 3 m)
Hose arm - 160 mm diameter - 3 m
82CAMIDI160-2M-M
CleanArc Midi 160 (Standing Typei, 2 m)
82CAMINI125-ARCSENSE
CleanArc Mini, Midi, Maxi Arc Sense kit
82CAMINI125-LIGHTKIT
C leanArc Mini, Midi, Maxi Light kit
Self supporting arm - 160 mm diameter - 2 m This kit automatically turns on the system by sensing welding arc. Light kit for fume extractor
APPLICATIONS • In the areas within the facilities where air filtering system does not exist • For rapidly extracting the fume from indoor areas • For extracting solder fume • In dental applications • In places where plastic welding and cut ting procedures are performed • In all welding, cutting and grinding applications
FEATURES • 2000 m3 /h air filtering capacity • 2.2 kw aluminum radial fan • Double-stage filtering • Easy filter cleaning • Monoblock steel body • Used together with extraction arm in 160 mm (6”) diameter Liability: All information in this catalog is based on the best available knowledge, is subject to change without notice and can only be considered as suitable for general guidance. Fumes: Consult information on Welding Safety Sheet, available upon request.
319
CleanArc® Mobile Fume Extraction Systems CleanArc MC100 MOBILE FILTER UNIT (Self-Cleaning) Featuring self-cleaning, CleanArc MC100 enables fume and dust extraction in environments where metal and plastic welding, cutting, grinding and polishing processes are performed. CleanArc MC100 has 3-stage filtering system and the, air first flows from spark arrester and reaches to the main filter where large particles are filtered. Finally it is filtered through the active carbon filter and by this way vast majority of the particles are cleaned completely. CleanArc MC100, which can be equipped with 2,3 or 4 meters self supporting fume extraction arms. CleanArc MC100 can also be used with flexible extraction arms supported with spiral steel wire as a more affordable option.
320 320
Liability: All information in this catalog is based on the best available knowledge, is subject to change without notice and can only be considered as suitable for general guidance. Fumes: Consult information on Welding Safety Sheet, available upon request.
MC100
STANDART EQUIPMENT Product Code
Product Name
Description
81CAMC100
CleanArc MC100
Self-cleaning fume extraction unit
82CAMIDI160-3M-M
CleanArc Midi 160 (Standing type, 3 m)
Self supporting fume extraction arm (3 m)
82CAMC100-PF
CleanArc MC100 polyester filter
Filter
82CAMC100-CF
CleanArc MC100 outlet filter
82CAMC100-CF
TECHNICAL DATA Nominal air flow
m3/h
1000
Weight
kg
125
Power Source
V/Hz
3x400/50
Motor Power
kW
1,1
Prefilter
Spark arrester Cleaning with 99% efficiency at 0,5 μm
Main filter
OPSİYONEL ÖZELLİKLER 82CAECO160-2M-M
CleanArc Eco 160 (Standing type 2 m)
Hose arm - 160 mm diameter - 2
82CAECO160-3M-M
CleanArc Eco 160 (Standing type, 3 m)
Hose arm - 160 mm diameter - 3 m
82CAMIDI160-2M-M
CleanArc Midi 160 (Standing type, 2 m)
82CAMINI125-ARCSENSE
CleanArc Mini, Midi, Maxi Arc Sense kit
82CAMINI125-LIGHTKIT
C leanArc Mini, Midi, Maxi Light kit
Self Supporting arm - 160 mm diameter - 2 m This kit automatically turns on the system by sensing welding arc. Light kit for fume extractor
APPLICATIONS • In the areas within the facilities where air filtering system does not exist • For rapidly extracting the fume from indoor areas • For extracting solder fume • In dental applications • In places where plastic welding and cutting procedures are performed • In all welding, cutting and grinding applications FEATURES • 1000 m3 /h air purfying capacity • 1.1 kw aluminum radial fan • Three-stage filtering • 10 litre compressed-air tank • Easy filter cleaning • Monoblock steel construction • Used together with extraction arm in 160 mm (6”) diameter Liability: All information in this catalog is based on the best available knowledge, is subject to change without notice and can only be considered as suitable for general guidance. Fumes: Consult information on Welding Safety Sheet, available upon request.
321 321
CleanArc® Mobile Fume Extraction Systems CleanArc MC200 MOBILE FILTER UNIT (Self-Cleaning) Featuring self cleaning, CleanArc MC200 offers double arm fume extraction feature. It enables fume and dust extraction in environments where metal and plastic welding, cutting, grinding and polishing processes are performed. CleanArc MC200 is especially used in facilities such as foundries, heavy industry facilities etc. where welding processes are intensely performed and where relatively cleaning is not possible at all.
majority of the particles are cleaned completely and clean and respirable air is outputted to the environment. CleanArc MC200, which can be used with 2,3 or 4 meters metersself supporting ex traction arms. In addition, it can also be used with flexible extraction arms supported with spiral steel wire as a more affordable option.
CleanArc MC200 has 3-stage filtering system first flows from spark arrester and reaches to the main filter where large particles are filtered. Finally the air is filtered through the active carbon filter and by this way vast
322 322
Liability: All information in this catalog is based on the best available knowledge, is subject to change without notice and can only be considered as suitable for general guidance. Fumes: Consult information on Welding Safety Sheet, available upon request.
MC200
STANDART EQUIPMENT Product Code
Product Name
81CAMC200
CleanArc MC200
82CAMIDI160-3M-M
CleanArc Midi 160 (Mobile unit type , 3 m)
82CAM100-F7
Filter F7
Açıklama Fume extraction main unit Mechanical fume extraction arm (2 units are required, 3 m) Filter
TECHNICAL DATA Nominal air flow
m3/h
2000
Weight
kg
195
Power Source
V/Hz
3x400/50
Motor Power
kW
2,2
Prefilter Main filter Outlet Filter
Spark arrester Cleaning with 99% efficiency at 0,5 μm Active carbon filter
OPTIONAL FEATURES 82CAECO160-2M-M
CleanArc Eco 160 (Standing Type, 2 m)
Hose arm - 160 mm diameter - 2 m
82CAECO160-3M-M
CleanArc Eco 160 (Standing Type, 3 m)
Hose arm - 160 mm diameter - 3 m
82CAMIDI160-2M-M
CleanArc Midi 160 (Standing Type, 2 m)
82CAMINI125-ARCSENSE
CleanArc Mini, Midi, Maxi Arc Sense kit
82CAMINI125-LIGHTKIT
CleanArc Mini, Midi, Maxi Light kit
Mechanical arm - 160 mm diameter - 2 m This kit automatically turns on the system by sensing welding arc. Light kit for fume extractor
82CAMC200-TC
CleanArc MC200 time control kit
Time counter for automatic filter cleaning
APPLICATIONS • In the areas within the facilities where air filtering system does not exist • For rapidly extracting the fume from indoor areas • For extracting solder fume • In dental applications • In places w here pla stic welding a nd cu t ting procedures are performed • In all welding, cutting and grinding applications
FEATURES • 2000 m3/h air purfying capacity • 2.2 kw aluminum radial fan • 24 m2 main filter surface area • Three-stage filtering • 10 litre compressed-air tank • Easy filter cleaning • Yekpare çelik gövde Liability: All information in this catalog is based on the best available knowledge, is subject to change without notice and can only be considered as suitable for general guidance. Fumes: Consult information on Welding Safety Sheet, available upon request.
323 323
CleanArc® Mobile Fume Extraction Systems CleanArc SC100 STATIONARY FILTER UNIT (Self Cleaning) Featuring self-cleaning, CleanArc SC100 fixed fume extraction unit enables fume and dust extraction in environments where metal and plastic welding, cutting, grinding and polishing processes are performed. It enables fume and dust extraction in environments where metal and plastic welding, cutting, grinding and polishing processes are performed.
CleanArc SC100, which can be equipped with 2,3 or 4 meters self supporting CleanArc fume extraction arms extraction arms. In addition, it can also be used with flexible extraction arms supported with spiral steel wire as a more affordable option.
CleanArc SC100 has 3-stage filtering system Air first flows from spark arrester and reaches to the main filter where large particles are filtered. Finally the air is filtered through the active carbon filter and by this way vast majority of the particles are cleaned completely and clean and respirable air is outputted to the environment.
324
Liability: All information in this catalog is based on the best available knowledge, is subject to change without notice and can only be considered as suitable for general guidance. Fumes: Consult information on Welding Safety Sheet, available upon request.
SC100
STANDART EQUIPMENT Product Code
Product Name
Description
81CASC100
CleanArc SC100
Fume extraction main unit
82CAMIDI160-3M-D
CleanArc Midi 160 (Hanging , 3 m)
Self supporting fume extraction arm (3 m)
82CASC100-PF
CleanArc SC100 polyester filter
Polyester Filter
TECHNICAL DATA Nominal air flow
m3/h
1000
Weight
kg
130
Power Source
V/Hz
3x400/50
Motor Power
kW
1,1 Cleaning with 99% efficiency at 0,5 μm Active carbon filter
Main filter Outlet Filter
OPTIONAL FEATURES 82CAECO160-2M-D
CleanArc Eco 160 (Hanging type , 2 m)
Hose arm - 160 mm diameter - 2 m
82CAECO160-3M-D
CleanArc Eco 160 (Hanging type , 3 m)
Hose arm - 160 mm diameter - 3 m
82CAMIDI160-2M-D
CleanArc Midi 160 (Hanging type , 2 m)
82CAMINI125-ARCSENSE
CleanArc Mini, Midi, Maxi Arc Sense kit
82CAMINI125-LIGHTKIT
CleanArc Mini, Midi, Maxi Light kit
Self Supporting arm - 160 mm diameter - 2 m This kit automatically turns on the system by sensing welding arc. Light kit for fume extractor
82CAMC200-TC
CleanArc MC200 time control kit
Time counter for automatic filter cleaning
APPLICATIONS • In the areas within the facilities where air filtering system does not exist • For rapidly extracting the fume from indoor areas • In places where plastic welding and cut ting procedures are performed • In all welding, cutting and grinding applications and in areas where flammable and abrasive chemical gas mixtures exist
FEATURES • 1000 m3/h air purfying capacity • 1.1 kw aluminum radial fan • Three-stage filtering • 10 litre compressed-air tank • Easy filter cleaning Monoblock steel body
Liability: All information in this catalog is based on the best available knowledge, is subject to change without notice and can only be considered as suitable for general guidance. Fumes: Consult information on Welding Safety Sheet, available upon request.
325
CleanArc® Fume Extraction Arms CleanArc SELF SUPPORTING FUME EXTRACTION ARMS CleanArc self suppor ting fume ex traction arms are manufactured with the ideal combination of flexibility and durability. The arms are manufactured from steel material for enabling long service life in heavy industry applications. In addition, CleanArc mechanical arms will not require any maintenance for long years thanks to the aluminum parts used in joints designed for arm flexibility.
Superior features Exterior joint system Comfortable and stable air flow Low noise More stable even at lower pressures Easy cleaning Low dust accumulation Disadvantages of internally supported hose type arms Air-suction capability decreases since the friction area is larger Difficult to clean due to its recessed structure Hoses are frequently punctured The interior mechanism fills with dust and this causes difficult adjustment.
Outstanding features: • Designed for heavy industry applications • External component completed with steel arms • External support with piston and self-locking joint structure • Design options of 2, 3 and 4 meter • The air flows within the arm without any vortex motion • Suspended piston as a standard.
Benefits: • Hassle-free usage for many years • Better air flow even at low air stream • Quiet • Easy location adjustment • High suction capability • Aluminum exterior joints • Standard turning on/off • Rigid handle • Inlet creating vortex
326
Air flow range recommended for CleanArc mechanical arms Arm Diameter (mm)
Air flow ratios for different diameters (m3/hour)
75
100÷150
100
150÷300
125
500÷700
160
1000÷1300
200
1400÷1800
Liability: All information in this catalog is based on the best available knowledge, is subject to change without notice and can only be considered as suitable for general guidance. Fumes: Consult information on Welding Safety Sheet, available upon request.
CleanArc Self Supporting Fume Extraction Arms Arm Diameter (mm)
Arm Reach (m)
Hood diameter (mm)
125
2,0
250
82CAMINI125-2M-D
82CAMINI125-2M-M
125
3,0
250
82CAMINI125-3M-D
82CAMINI125-3M-M
160
2,0
315 (500)
82CAMIDI160-2M-D
82CAMIDI160-2M-M
160
3,0
315 (500)
82CAMIDI160-3M-D
82CAMIDI160-3M-M
Order Codes for Hanging Arms
Order Codes for Hanging Arms
160
4,0
315 (500)
82CAMIDI160-4M-D
82CAMIDI160-4M-M
200
2,0
350 (500)
82CAMAXI200-2M-D
82CAMAXI200-2M-M
200
3,0
350 (500)
82CAMAXI200-3M-D
82CAMAXI200-3M-M
200
4,0
350 (500)
82CAMAXI200-4M-D
82CAMAXI200-4M-M
Air Flow graphics for CleanArc Fume Extraction Arms
CleanArc Mini 125
CleanArc Maxi 200
CleanArc Midi 160
CleanArc Mounting Brackets
Model
n
Dia. (mm) I (mm)
L (mm)
H (mm)
W (mm)
H (mm)
Weight (kg)
Part. No.
Mini 125 Bracket
125
125
153
253
35
240
160
3.6
82CAMINI125-BRAC
Midi 160 Bracket
160
160
254
374
35
250
165
3.6
82CAMIDI160-BRAC
Maxi 200 Bracket
205
205
314
460
40
330
250
6.3
82CAMAXI200-BRAC
Liability: All information in this catalog is based on the best available knowledge, is subject to change without notice and can only be considered as suitable for general guidance. Fumes: Consult information on Welding Safety Sheet, available upon request.
327
CleanArc® Fume Extraction Arms CleanArc Mini 125 SELF SUPPORTING EXTRACTION ARMS CleanArc Mini 125 is the ideal self supporting arm that can be used for extraction of dirty air in narrow working areas. These units can be used for extracting welding fumes, grinding and polishing wastes and oil based fumes from the environment. All controls for adjusting the location of arm during operation are located outside and no other additional part is required.
Hanging Type
Applications Welding, grinding, cutting, polishing, painting, packaging processes Temperature resistance up to 80°C Operates efficiently between 500-700m3/h air flow range It can be used for all local air cleaning applications except chemical materials that are chemically corrosive
Design Features: All controls are located outside Aluminum hood Durable aluminum cast joints Hoses durable up to 80°C
Standing Type self supporting Arm
CleanArc Mini 125 Self SupportinG Arms - Hanging Type 82CAMINI125-2M-D
CleanArc Mini 125 Self Supporting Arm, 2 meters reach, 125 mm inner diameter - 250 mm hood diameter
82CAMINI125-3M-D
CleanArc Mini 125 Self Supporting Arm Arm, 3 meters reach, 125 mm inner diameter - 250 mm hood diameter
CleanArc Mini 125 Self Supporting Arms - Standing Type 82CAMINI125-2M-M
CleanArc Self Supporting, 2 meters reach, 125 mm inner diameter - 250 mm hood diameter
82CAMINI125-3M-M
CleanArc Self Supporting Arm, 3 meters reach, 125 mm inner diameter - 250 mm hood diameter
CleanArc Mini 125 Self Supporting Arms - Accessories 82CAMINI125-BRAC
Mounting bracket-for Mini 125 series
82CAMINI125-FLAN
CleanArc Mini 125 Mounting flange
82CAMINI125-ARCSENSE
Lamp kit with arc sensor (includes photosensor, lamp kit, switch and 8mt cable)
82CAMINI125-LIGHTKIT
Lamp Kit (Lamp kit, switch, 8 mt cable)
82CAMINI125-LIGHTKIT2
Lamp kit with double switch (2nd switch is used for fan control)
82CAMINI-GROUND
Grounding Kit (Grounding connections for all metal parts)
CleanArc Mini 125 Self Supporting Arms - Spare Parts 82CAMINI-PVCHOSE
CleanArc Mini 125 plastic hose components (complete set)
82CAMINI-HOOD250
Hood 125 mm / 250mm (complete set)
82CAMINI-SPRING-2M
CleanArc Mini 125 support spring (Hanging type, 2 m)
82CAMINI-SPRING-3M
CleanArc Mini 125 support spring (Hanging type, 3 m)
328 328
Liability: All information in this catalog is based on the best available knowledge, is subject to change without notice and can only be considered as suitable for general guidance. Fumes: Consult information on Welding Safety Sheet, available upon request.
CleanArc Midi 160 SELF SUPPORTING FUME EXTRACTION ARMS CleanArc Midi 160 are the self supporting arms that can be used in intense industrial applications without requiring maintenance for many years. These units can be used for extracting welding fumes, grinding and polishing wastes and oil based fumes from the environment. All controls for adjusting the location of arm during operation are located outside and no other additional part is required.
Wall Type
Applications Welding, grinding, cutting, polishing, painting, packaging processes Temperature resistance up to 80°C Operates efficiently between 500-700 m3/h air flow range It can be used for all local air cleaning applications except chemical materials that are chemically corrosive
Design Features: Body structure that enables easy location adjustment Aluminum fume extractor Durable aluminum cast joints Metallic arms coated with oven-drying painting method Hoses durable up to 80°C Mobile Unit Mechanical Arm
CleanArc Midi 160 Wall-Mounted Self-Supporting Arms 82CAMIDI160-2M-D
CleanArc Midi 160 Mechanical arm, 2 meters accessibility, 160 mm inner diameter - 315 mm fume extractor diameter
82CAMIDI160-3M-D
CleanArc Midi 160 Mechanical arm, 3 meters accessibility, 160 mm inner diameter - 315 mm fume extractor diameter
82CAMIDI160-4M-D
CleanArc Midi 160 Mechanical arm, 4 meters accessibility, 160 mm inner diameter - 315 mm fume extractor diameter
CleanArc Midi 160 Standing Self Supporting Arms 82CAMIDI160-2M-M
CleanArc Midi 160 Mechanical arm, 2 meters accessibility, 160 mm inner diameter - 315 mm fume extractor diameter
82CAMIDI160-3M-M
CleanArc Midi 160 Mechanical arm, 3 meters accessibility, 160 mm inner diameter - 315 mm fume extractor diameter
82CAMIDI160-4M-M
CleanArc Midi 160 Mechanical arm, 4 meters accessibility, 160 mm inner diameter - 315 mm fume extractor diameter
CleanArc Midi 160 Self Supporting Arms - Accessories 82CAMIDI160-BRAC
Mounting Bracket - for Midi 160 series
82CAMIDI160-BRAC-L
Mounting Bracket - for Midi 160 series (long type)
82CAMIDI160-FLAN150
Mounting Flange - 150 mm
82CAMIDI160-FLAN160
Mounting Flange - 160 mm
82CAMINI125-ARCSENSE Lamp kit with arc sensor (includes photosensor, lamp kit, switch and 8 m cable) 82CAMINI125-LIGHTKIT
Lamp Kit (Lamp kit, switch, 8 m cable)
82CAMINI125-LIGHTKIT2 Lamp kit with double switch (2nd switch is used for fan control) 82CAMINI-GROUND
Grounding Kit (Grounding connections for all metal parts)
CleanArc Midi 160 Self Supporting Arms - Spare Parts 82CAMIDI-PVCHOSE
CleanArc Midi 160 plastic hose components (complete set)
82CAMIDI-HOOD315
Hood 160 mm / 315 mm (complete set)
82CAMIDI-SPRING-2M-3M
Cleanarc Midi 160 support spring (Wall type, 2 m, 3 m)
82CAMIDI-SPRING-4M
Cleanarc Midi 160 support spring (Wall type, 4 m)
Liability: All information in this catalog is based on the best available knowledge, is subject to change without notice and can only be considered as suitable for general guidance. Fumes: Consult information on Welding Safety Sheet, available upon request.
329 329
CleanArc® Fume Extraction Arms CleanArc Maxi 200 SELF SUPPORTING ARMS CleanArc Maxi 200 are the self supporting arms that can be used in intense industrial applications without requiring maintenance for many years. These units can be used for extracting welding fumes, grinding and polishing wastes and oil based fumes from the environment. All controls for adjusting the location of arm during operation are located outside and no other additional part is required.
Applications: Welding, grinding, cutting, polishing, painting, packaging processes Temperature resistance up to 80°C Operates efficiently between 1400-1800m 1400-1800m3 /h air flow range It can be used for all local air cleaning applications except chemical materials that are chemically corrosive
Design Features: Body structure that enables easy location adjustment Aluminum fume extractor Durable aluminum cast joints Metallic arms coated with oven-drying painting method Hoses durable up to 80°C
CleanArc Maxi 200 Self Supporting Arms 82CAMAXI200-2M-D
CleanArc Maxi 200 Mechanical arm, 2 meters accessibility, 200 mm inner diameter - 350 mm fume extractor diameter
82CAMAXI200-3M-D
CleanArc Maxi 200 Mechanical arm, 3 meters accessibility, 200 mm inner diameter - 350 mm fume extractor diameter
82CAMAXI200-4M-D
CleanArc Maxi 200 Mechanical arm, 4 meters accessibility, 200 mm inner diameter - 350 mm fume extractor diameter
CleanArc Maxi 200 Standing Type Self Supporting Arms 82CAMAXI200-2M-M
CleanArc Maxi 200 Mechanical arm, 2 meters accessibility, 200 mm inner diameter - 350 mm fume extractor diameter
82CAMAXI200-3M-M
CleanArc Maxi 200 Mechanical arm, 3 meters accessibility, 200 mm inner diameter - 350 mm fume extractor diameter
82CAMAXI200-4M-M
CleanArc Maxi 200 Mechanical arm, 4 meters accessibility, 200 mm inner diameter - 350 mm fume extractor diameter
CleanArc Maxi 200 Self Supporting - Accessories 82CAMAXI200-BRAC
Mounting bracket-for Maxi 200 series
82CAMAXI200-FLAN
Mounting Flange - 200 mm
82CAMAXI200-FLAN
Lamp kit with arc sensor (includes sensor, on-off switch and 8 m cable)
82CAMINI125-LIGHTKIT
Lamp kit (includes on-off switch and 8 m cable)
82CAMINI125-LIGHTKIT2
Lamp kit - with double switch (Includes double switch, additional switch can be used for turning on/off the fan)
82CAMINI-GROUND
Grounding Kit (Grounding connections for all metal parts)
CleanArc Maxi 200 Self Supporting - Spare Parts 82CAMAXI-PVCHOSE
CleanArc Maxi 200 plastic hose components (complete set)
82CAMAXI-HOOD350
Hood 200 mm / 350 mm (complete set)
82CAMAXII-SPRING-2M-3M
Cleanarc Maxi 200 support spring (Wall type, 2 m, 3 m)
82CAMAXII-SPRING-4M
Cleanarc Maxi 200 support spring (Wall type, 4 m)
82CAMAXII-SHOCKSPRING-2M Cleanarc Maxi 200 piston (Mobile unit type, 2 m)
330
Liability: All information in this catalog is based on the best available knowledge, is subject to change without notice and can only be considered as suitable for general guidance. Fumes: Consult information on Welding Safety Sheet, available upon request.
CleanArc Tele 160 TELESCOPIC FUME EXTRACTION ARMS CleanArc Tele 160 Telescopic fume extraction arms are the mechanical fume extraction arms specially designed for enabling operation in narrow spaces such as cabins. Since all mechanical parts of the arm are located outside the arm, the turbulence ratio inside the arm is highly decreased. Thanks to the low turbulence ratio, fume extraction process is performed with less power. CleanArc self supporting fume extraction arms are used for heavy industry applications and they do not require maintenance.
Design Features:
Features:
are durable up to 80ºC
All parts are located outside the arm Aluminum fume extractor Aluminum cast joints Steel arms painted with powder coating PVC hose components that
Can be used for heavy industry applications Can be used for applications such as welding, painting etc. External support with piston and self-locking joint structure Suspended piston as a standard. Benefits: Hassle-free usage for many years Quiet Maintenance free High air suction capability Applications Polytechnic institutes, repair & maintenance shops, production lines, welding cells Durable up to 80ºC Operates efficiently between 1000-1300m 3/h air flow range It can be used for all local air cleaning applications except corrosive chemical materials
Model
Reach (min.)
Reach (max.)
CleanArc Tele 160-16 CleanArc Tele 160-18 CleanArc Tele 160-26
1120 1310 1515
1435 1740 2535
CleanArc Tele 160 Telescobic Arms 82CATELE160-16 82CATELE160-18 82CATELE160-26
CleanArc Tele 160 - 16 (Wall type telescopic arm, 1.2 - 1.6 m accessibility) CleanArc Tele 160 - 18 (Wall type telescopic arm, 1.4 - 1.8 m accessibility) CleanArc Tele 160 - 26 (Wall type telescopic arm, 1,8 - 2,6 m accessibility)
CleanArc Tele 160 Telescobic Arms - Accessories 82CAMIDI160-BRAC 82CAMIDI160-BRAC-L 82CAMIDI160-FLAN150 82CAMIDI160-FLAN160 82CAMINI125-LIGHTKIT 82CAMINI125-LIGHTKIT2 82CAMINI125-LIGHTKIT2 82CAMINI-GROUND
Mounting Bracket for TELE 160 series Mounting Bracket for TELE 160 series (long type) Mounting Flange - 150 mm Mounting Flange - 160 mm Lamp kit with arc sensor (includes sensor, on-off switch and 8 m cable) Lamp Kit (Lamp kit, switch, 8 m cable) Lamp kit with double switch (2nd switch is used for fan control) Grounding Kit (Grounding connections for all metal parts)
CleanArc Tele 160 Telescopic Arms - Spare Parts 82CATELE-PVCHOSE 82CAMIDI-HOOD315 82CATELE-SPRING
CleanArc Eco 160 1620 plastic hose components (complete set) Hood160 mm / 315 mm (complete set) CleanArc Tele 160 support spring for wall type connections
Liability: All information in this catalog is based on the best available knowledge, is subject to change without notice and can only be considered as suitable for general guidance. Fumes: Consult information on Welding Safety Sheet, available upon request.
331
CleanArc® Fume Extraction Arms Clean Arc Midi 160 EXTENSION ARMS CleanArc Midi 160 series extension arms are the units used for improving reaching capacity of hanging type CleanArc Midi 160 self supporting or CleanArc Eco 160 series hose type arms. Motor or air ducting connection can be made directly on bases of units that can be mounted on walls or steel columns. Since the base of extension arms and support arms are manufactured from monoblock steel material, they are ideal for using in intense industrial applications. As a standard, the products enable connection of CleanArc series self supporting arms without requiring any extra parts. Since connection and support mechanisms are located outside, no turbulence is created and this enables them to provide same level of fume extraction with lower power compared to their competitors.
Fixed extension arm
Single joint extension arm
Applications: Grinding, polishing, packaging, cutting etc. Temperature resistance up to 80°C Operates efficiently between 1000-1300 m3 /h air flow range
Design Features: Galvanized pipes are used in extension arm All connection mechanism are located outside the arm Finely processed joint surfaces having low friction All are manufactured from hoses that are durable up to 80ºC
Double joint extension arm
Stationary Extension Arms - for Midi 160 series 82CAFIX160-1M
CleanArc Fixed 160 - fixed extension arm 1 m
82CAFIX160-2M
CleanArc Fixed 160 - fixed extension arm 2 m
Single Pivot Extension Arms - for Midi 160 series 82CASP160-1M
CleanArc SP 160 - Single pivot extension arm, 1 m
82CASP160-2M
CleanArc SP 160 - Single pivot extension arm, 2 m
82CASP160-3M
CleanArc SP 160 - Single pivot extension arm, 3 m
82CASP160-4M
CleanArc SP 160 - Single pivot extension arm, 4 m
82CASP160-5M
CleanArc SP 160 - Single pivot extension arm, 5 m
82CASP160-6M
CleanArc SP 160 - Single pivot extension arm, 6 m
Double Joint Extension Arms - for Midi 160 series 82CADP160-2M1M
CleanArc DP 160 - Double pivot extension arm, 2 m + 1 m
82CADP160-2M2M
CleanArc DP 160 - Double pivot extension arm, 2 m + 2 m
82CADP160-3M1M
CleanArc DP 160 - Double pivot extension arm, 3 m + 1 m
82CADP160-3M2M
CleanArc DP 160 - Double pivot extension arm, 3 m + 2 m
82CADP160-4M1M
CleanArc DP 160 - Double pivot extension arm, 4 m + 1 m
82CADP160-4M2M
CleanArc DP 160 - Double pivot extension arm, 4 m + 2 m
CleanArc Midi 160 Series Extension Arms - Spare Parts 82CASP160-PVCHOSE
CleanArc SP 160 PVC hose set (spare)
82CADP160-PVCHOSE
CleanArc DP 160 PVC hose set (spare)
332
Liability: All information in this catalog is based on the best available knowledge, is subject to change without notice and can only be considered as suitable for general guidance. Fumes: Consult information on Welding Safety Sheet, available upon request.
Specifications of CleanArc Midi 160 Single and Double Pivot Extension Arms
Minimum height = 2.4 m
Minimum height = 2.4 m
Single pivot extension arm
Double pivot extension arm
Single pivot extension arm reaching capacity
Double pivot extension arm reaching capacity
Model Ø 160
R1 (m)
R2 (m)
R3 max (m)
Weight (kg) 66
82CASP160-3M
3m
2.9
-
4
82CASP160-4M
4m
3.8
-
4
74
82CASP160-5M
5m
4.8
-
4
82 91
82CASP160-6M
6m
5.8
-
4
82CADP160-2M1M
2m+1m
2.0
1.1
3
74
82CADP160-2M2M
2m+2m
2.0
1.8
3
79
82CADP160-3M1M
2m+1m
3.0
1.1
3
82
82CADP160-3M2M
3m+1m
3.0
1.8
3
87
82CADP160-4M1M
4m+1m
3.8
1.1
3
91
82CADP160-4M2M
4m+2m
3.8
1.8
3
97
Liability: All information in this catalog is based on the best available knowledge, is subject to change without notice and can only be considered as suitable for general guidance. Fumes: Consult information on Welding Safety Sheet, available upon request.
333
CleanArc® Fume Extraction Arms CleanArc Maxi 200 EXTENSION ARMS CleanArc Maxi 200 series extension arms are the units used for improving reaching capacity of hanging type CleanArc Midi 160 self supportring or CleanArc Eco 160 series hose type arms.Motor or ducting connection can be made directly on bases of units that can be mounted on walls or steel columns. Since the base of extension arms and support arms are manufactured from monoblock steel m a terial, t hey a re ide al for using in intense industrial applications. As a standard, the products enable connection of CleanArc series mechanical arms without requiring any extra parts. Since connection and support mechanisms are located outside, no turbulence is created and this enables them to provide same level of fume extraction with lower power compared to their competitors.
Finely processed joint surfaces having low friction PVC hoses that are durable up to 80ºC
Single joint extension arm
Applicaitons: Applications such as welding, grinding, polishing, packaging, cutting etc. Temperature resistance up to 80°C Operates efficiently between 1400-1800 m 3/h air flow range Double joint extension arm
Design Features: Galvanized pipes are used in extension arm All connection mechanism are located outside the arm
Single Joint Extension Arms - for Maxi 200 series 82CASP200-1M
CleanArc SP 200 - Single pivot extension arm, 1 m
82CASP200-2M
CleanArc SP 200 - Single pivot extension arm, 2 m
82CASP200-3M
CleanArc SP 200 - Single pivot extension arm, 3 m
82CASP200-4M
CleanArc SP 200 - Single pivot extension arm, 4 m
82CASP200-5M
CleanArc SP 200 - Single pivot extension arm, 5 m
82CASP200-6M
CleanArc SP 200 - Single pivot extension arm, 6 m
Double PivotExtension Arms - for Maxi 200 series 82CADP200-2M1M
CleanArc DP 200 - Double pivot extension arm, 2 m + 1 m
82CADP200-2M2M
CleanArc DP 200 - Double pivot extension arm, 2 m + 2 m
82CADP200-3M1M
CleanArc DP 200 - Double pivot extension arm, 3 m + 1 m
82CADP200-3M2M
CleanArc DP 200 - Double pivot extension arm, 3 m + 2 m
82CADP200-4M1M
CleanArc DP 200 - Double pivot extension arm, 4 m + 1 m
82CADP200-4M2M
CleanArc DP 200 - Double pivot extension arm, 4 m + 2 m
CleanArc Maxi 200 Series Extension Arms - Spare Parts 82CASP200-PVCHOSE
CleanArc SP 200 PVC hose set (spare)
82CADP200-PVCHOSE
CleanArc DP 200 PVC hose set (spare)
334
Liability: All information in this catalog is based on the best available knowledge, is subject to change without notice and can only be considered as suitable for general guidance. Fumes: Consult information on Welding Safety Sheet, available upon request.
Specifications of CleanArc Maxi 200 Single and Double Pivot Extension Arms
Minimum height = 2.4 m
Minimum height = 2.4 m
Single pivot extension arm
Double pivot extension arm
Single pivot extension arm operation range
Double pivot extension arm reaching capacity
Model Ø 200
R1 (m)
R2 (m)
R3 max (m)
Weight (kg) 104
82CASP200-2M
2m
2.1
-
4
82CASP200-3M
3m
2.9
-
4
111
82CASP200-4M
4m
3.8
-
4
126
82CASP200-5M
5m
4.9
-
4
135
82CASP200-6M
6m
5.9
-
4
150
82CADP200-2M1M
2m+1m
1.9
1.1
3
125
82CADP200-2M2M
2m+2m
1.9
1.8
3
133
82CADP200-3M1M
2m+1m
2.9
1.1
3
140
82CADP200-3M2M
3m+1m
2.9
1.8
3
138
82CADP200-4M1M
4m+1m
3.9
1.1
3
147
82CADP200-4M2M
4m+2m
3.9
1.8
3
155
Liability: All information in this catalog is based on the best available knowledge, is subject to change without notice and can only be considered as suitable for general guidance. Fumes: Consult information on Welding Safety Sheet, available upon request.
335
CleanArc®Fume Extraction Arms CleanArc Eco 160 FLEXIBLE HOSE TYPE FUME EXTRACTION ARM CleanArc Eco 160 is flexible hose type fume extraction arm that can be used except heavy industry applications. These are lower cost products when compared with CleanArc self supporting fume extraction arms. There are two different types for using in mobile units and wall type connections.
Applications: Welding, dust extraction (low usage) Temperature resistance up to 80°C Operates efficiently between 800-1000 m3 /h air flow range It can be used for all local air cleaning applications except chemical materials that are chemically corrosive
Design Features: Mechanical support components are located inside Aluminum fume extractor All are manufactured from hoses that are durable up to 80ºC Model
Arm Length (m)
Arm diameter (m)
Hood diameter (mm)
Arm version
2.0
160
315
Hanging type
3.0
160
315
Hanging Type
2.0
160
315
Standing Type
3.0
160
315
Standing Type
CleanArc Eco 160 (Wall type, 2 m) CleanArc Eco 160 (Wall type, 3 m) CleanArc Eco 160 (Mobile unit type, 2 m) CleanArc Eco 160 (Mobile unit type, 3 m)
Clean Arc Eco 160 - Hanging Type 82CAECO160-2M-D
CleanArc Eco 160 Arm, 2 meters reach, 160 mm inner diameter - 315 mm hooddiameter
82CAECO160-3M-D
CleanArc Eco 160 Arm, 3 meters reach, 160 mm inner diameter - 315 mm hood diameter
Clean Arc Eco 160 - Mobile Unit Type 82CAECO160-2M-M
CleanArc Eco 160 Arm, 2 meters accessibility, 160 mm inner diameter - 315 mm fume extractor diameter
82CAECO160-3M-M
CleanArc Eco 160 Arm, 3 meters accessibility, 160 mm inner diameter - 315 mm fume extractor diameter
Clean Arc Eco 160 - Accessories 82CAMIDI160-BRAC
Mounting Bracket - for Eco 160 series
82CAMIDI160-BRAC-L
Mounting Bracket - for Eco 160 series (long type)
82CAMIDI160-FLAN150 Mounting Flange - 150 mm 82CAMIDI160-FLAN160 Mounting Flange - 160 mm
CleanArc ECO 160 - Spare Parts 82CAECO-PVCHOSE-2M
CleanArc Eco 160 plastic hose components (complete set)
82CAECO-PVCHOSE-3M
CleanArc Eco 160 plastic hose components (complete set)
82CAECO-HOOD315
Fume extractor 160 mm / 315 mm (complete set)
82CAECO-SPRING
CleanArc Eco 160 support spring for wall type connections
336
Liability: All information in this catalog is based on the best available knowledge, is subject to change without notice and can only be considered as suitable for general guidance. Fumes: Consult information on Welding Safety Sheet, available upon request.