ARCHITECTURAL LED LUMINAIRES
LED Luminaires • 4” & 6” Rounds • 4” & 6” Squares • 9” Cylinders
Architectural LED Luminaires
Indy LED Downlights that meet your commercial needs, while helping to save the planet…
…it’s the
best
of all
possible worlds.
Rounds Squares
Cylinders
Next generation LED…from Indy The spotlight on energy conservation has never been brighter than it is today. The specter of global warming and dwindling natural resources has made energy sustainability everyone’s responsibility. Juno Lighting Group engineers are meeting the challenge head-on by applying the latest breakthroughs in LED technology to the world of commercial lighting. The new Indy Designer Series LED Luminaires use next generation, high power LEDs to produce nearly 1000 and 1800 lumens of pure white light from just 18 or 34 watts of energy. That’s illumination output ideal for wide-ranging commercial applications but with energy consumption as little as 20% that of comparable conventional light sources.
Doing more with our common planet. We call it, “EcoLEDgy”… harnessing the power of LEDs for eco-friendly lighting solutions. With industryleading fixture efficacies of 50 lumens/watt, Indy LED luminaires produce prodigious amounts of light while consuming miniscule amounts of energy. They easily meet the requirements of virtually all of your “green” initiatives, and they have no UV or IR emissions; no dangerous mercury, lead, or PCBs; and are fully RoHS compliant.
TABLE OF CONTENTS
1100 lm – Light Engine
2000 lm – Light Engine
2| 4| 6| 8| 10|
12| 14| 16| 18| 28|
20| 22| 24| 26| 29|
Meeting Your Needs Next Generation LED Product Offering Advanced Optics Savings All Around
4” & 6” Round Downlights 4” & 6” Round Wall Washers 4” & 6” Square Downlights 4” & 6” Square Wall Washers 9” Cylinders
4” & 6” Round Downlights 4” & 6” Round Wall Washers 4” & 6” Square Downlights 4” & 6” Square Wall Washers 9” Cylinders junolightinggroup.com
1
Architectural LED Luminaires Meeting your Commercial needs Indy, the premier brand of architectural recessed lighting and the first choice of lighting designers, architects and engineers, has expanded its premium line of round, square, and cylinder fixtures with the introduction of a new range of high-powered LEDs. Offering enduring beauty and eco-friendly, energy-saving performance, the new high-output LED luminaires are available in two models: a nearly 1000 lumen, 18 watt version producing illumination comparable to 26 watt compact fluorescents; and an 1800 lumen, 34 watt version comparable to 42 watt compact fluorescents.
Meeting your needs Industry leading lumen package The 1800 lumen Indy LED Luminaire is the first package to offer light output levels ideally suited to the challenges of commercial illumination. Output is comparable to 42 watt compact fluorescent fixtures. Energy savings With just 34 input watts and a luminaire efficacy of 50 lumens per watt, Indy LED Luminaires can cut your power consumption by one-third compared to equivalent compact fluorescent fixtures that require 42 input watts and produce around 39 lumens per watt. To conserve even more energy, use Indy LED 1000 Luminaires that consume only 18 watts input.
Color consistency Indy light engines with remote phosphor technology feature blue LEDs, a mixing chamber and a phosphor coated lens that converts the blue light to white light at specified color temperatures. This unique approach results in superior fixture-to-fixture color consistency.
2
junolightinggroup.com
Peace of mind Indy’s unique modular design permits easy replacement of the light engine should technology improvements become available before or at the end of the LED’s useful life. In addition, all Indy LED fixtures are covered with a 5-year warranty. Outstanding performance Indy’s secondary optics have been optimized around the LED light engine to provide superior brightness control at the ceiling and smooth, even light distribution on floors or walls. Choices and Options The Indy offering is the broadest in its category featuring outputs of nearly 1000 and 1800 fixture lumens, 4” and 6” round and square luminaires, and 9” surface, pendant, and wall-mount cylinders. Available color temperatures are 3000K, 3500K, and 4100K; dimming is standard and emergency lighting is optional.
Remarkable lumen packages – energy savings, color consistency, stunning performance, extensive selection and peace of mind.
Advantages of the Modular Design The Indy design helps to mitigate concerns about adopting new technology. How? While many LED downlights have been designed with the light engines as an integral non-replaceable part of the heat sink, Indy engineers found a way to achieve the required heat sink properties using a modular design. Ready for Today and Tomorrow The light engine and driver of the Indy LED Luminaire are modular components and have been designed for easy access from above or below the fixture, permitting quick, economical replacement. So if you want to change color temperature, upgrade to future technology advancements, or replace the light engine at the end of its useful life, it can easily be accomplished without having to return the unit to the factory or installing a new fixture. 5-Year Warranty A 5-Year warranty is your assurance that you are purchasing the highest quality product. However, should the light engine or driver ever require maintenance, the modular design makes servicing the fixture as simple as conventional lamp/ballast replacement.
junolightinggroup.com
3
Architectural LED Luminaires A new generation LED technology for commercial illumination High-output Color Consistent, Remote Phosphor Light Engine
The remote phosphor light engine integrates multiple blue LED die in a mixing chamber that efficiently directs the blue light from the die onto a remote phosphor disc. Since the light extraction from the blue LED die is greater than comparable white phosphor conversion LEDs, the highly efficient light engine produces 1100 lumens from just 18 watts of input energy or 2000 lumens from just 34 watts. In addition, by blending multiple blue LED die in the mixing chamber, a more-consistent blue wavelength can be matched to the remote phosphor disc, producing CCTs of 3000K, 3500K, or 4100K at 80 CRI. The result is superior color consistency compared to all other conventional white LED packages in use today. And since the phosphor is removed from the heat source, thermal degradation of the phosphor is minimized and long-term color stability is maximized. The modular, quick-connect light engine, enables LED change-out from below ceiling level, eliminating the need to replace the entire fixture or heat sink saving time and reducing waste. It’s the ultimate in convenience.
4
junolightinggroup.com
Indy LED light engine and driver produce brilliant-white, color-consistent light LED Driver The Indy LED driver is up to 10% more efficient than typical LED drivers. “Intelligent” solid-state technology supplies consistently accurate current to the light engine under a wide range of operating conditions. Instant on; powers-up in milliseconds. Available for 120-volt, 277-volt, or 347-volt input.
Thermal Management Thermal management is critical to every aspect of an LED fixture. Light output, service life and color stability are all directly related to operating temperature. By designing the light engine into a fully enclosed, modular system, maximum heat dissipation is achieved. The die-cast heat sink provides superior thermal management, assuring optimal service life. After 50,000 hours, LEDs can be expected to produce at least 70% of their initial output with imperceptible color change.
junolightinggroup.com
5
Architectural LED Luminaires Product offering Expanded range of LED luminaires joins the Indy Designer Series collection of downlight, wall wash, Rounds
and accent lighting fixtures. G
Like all the fixtures in the Indy Designer Series, Indy LED Luminaires are designed for optimal light source concealment, creating the sought-after “quiet ceiling” look. They produce color-consistent, brilliant white light while dramatically reducing energy consumption. The fully concealed, solid state LED light engine offers unprecedented service life and is easily replaceable to accommodate future technology upgrades. The superior housing design of Indy LED Luminaires is suitable for suspended grid, plaster, or drywall applications, and its low-profile makes it ideal for 2” x 6” construction. Easy-to-install proprietary Tru-Lock bar hangers offer fast, repeatable fixture positioning in tile centers or in quarter-tile increments. And unlike most other LED luminaire designs, Indy LED housings and components require no field assembly of any kind.
6
junolightinggroup.com
E
C F
D B
A
The Indy LED luminaires are an ideal recessed lighting solution for retail, hospitality, grocery, medical or business office applications.
A
Trim Self-flanged, low brightness trims with three Alzak® finishes, minimize rainbowing and reduce distracting spill light, creating a pleasant ”quiet ceiling” appearance. Wall wash and downlight trims are interchangeable and require no modification to housing.
B
Mounting Bracket Adjustable mounting brackets provide 2" of vertical adjustment to facilitate installation. Indy Tru-Lock bar hangers are standard for secure mounting into T-bar drop ceiling applications.
C
Housing Commercial grade construction for greater structural integrity is standard. Black baked enamel finish reduces stray light.
Squares G E C F D B
D Junction Box
For service, the oversized J-box is accessed easily through the fixture’s aperture. UL Listed for through-branch wiring and damp locations.
A
E
Advanced Thermal Management The Indy LED fixture employs an efficient cast-aluminum heat sink integrated directly with the housing to maintain the LED junction temperature below the manufacturer’s published limits. At the end of their 50,000 hour rated life, the LEDs can be expected to produce at least 70% of their initial light output with imperceptible changes in color. Nuventix active cooling heat sink used for cylinders.
F
High-Output LED Light Engine Innovative light engine utilizes mixing chambers and remote phosphor lenses to deliver either 1100 lumens from only 18W or 2000 lumens from only 34W, maximizing fixture efficacy and providing superior color consistency. Available in 3000K, 3500K, or 4100K color temperatures. Easily replaceable from below the ceiling.
C
Cylinders
G
E F
A
G LED Driver
Indy’s driver design accommodates input voltages of 120, 277, or 347 VAC. The “intelligent” state-of-the-art driver supplies proper, constant current to the LED light engine, providing consistent lumen output under a wide range of operating conditions. Dimming to 10% (0-10V) is standard; emergency-lighting back-up operation is optional. Easily serviced from above or below the ceiling.
junolightinggroup.com
7
Architectural LED Luminaires Advanced Optics Advanced Optics
Color options*
Computer-optimized reflectors and deep regression of source produces a very low brightness aperture with exceptional cutoff to the lamp and lamp image. The extensive reflector selection is offered in an array of colors with three finish options — specular, semi-specular and satin —providing ultimate flexibility in any environment.
Round trims are available in specular, semi-specular and satin finishes. Square trims are available in specular or satin finishes.
Squares
Rounds
Black
Black
Bronze
Bronze
Wheat
Wheat
Wall Washing The wall wash units incorporate a unique spread-reflector “kicker” panel in the lower Wall Wash trim that provides a striation-free, floor to ceiling wash and uniform light distribution. Designer Series LED wall wash trims/cones are fully interchangeable with open downlight trims on the same housings without the need for any other modifications.
Clear
Clear
Champagne Gold
Gold
Pewter
Pewter
White
White
* Color options above are shown in a satin finish
8
junolightinggroup.com
Rounds
Squares
The extensive reflector selection is offered in an array of color and finish options.
junolightinggroup.com
9
Architectural LED Luminaires Savings all around Compared to CFL fixtures, Indy LED Luminaires can reduce your lighting energy costs by more than 30%. But the savings don’t stop there. With an operating life expectancy of 50,000 hours, LEDs last about 25-30 times longer than incandescent lamps, and about 5-times longer than CFLs, drastically cutting re-lamping and maintenance costs. Factor in the energy savings…and annual operating costs for commercial lighting can be reduced by up to 58% vs Compact Fluorescent. Even greater savings result from reduced air-conditioning costs thanks to cool-running LED luminaires.
Retail, hospitality, grocery, medical, or business office…Indy LED Luminaires are the perfect commercial recessed lighting solution • Dramatically reduced energy consumption • Dimming down to 10% • Remarkably 50,000 hour long life • Color temperatures of 3000K, 3500K, 4100K • Color-consistent, brilliant white light • Upgradeable, solid-state LED light engine • Concealed LEDs; low-glare optics system • Optional emergency lighting back-up • Low-Profile - less than 6” above the ceiling for 4” aperture units • Eco-friendly; RoHS compliant, no UV, IR, PCBs, lead or mercury • Complies with FCC 47, Part 15 Class A • Five year warranty
10
junolightinggroup.com
LED vs CFL: Fixture Comparison The Indy line of compact-fluorescent recessed downlights already delivers up to 10% greater efficiency than competitive units. Now, with the new Indy LED Luminaires, the bar has been set even higher.
4” LED 18W
Fixture Summary
6” Vert CFL 26W
1100 Lumen Light Engine
Layout study based on 25 fixtures on a 30’ x 30’ space with 9’ ceilings
Illuminance Summary
Operating Cost Summary
Annual Operating Cost Reduced by 58% 6” LED 34W
Fixture Summary
6” Vert CFL 42W
2000 Lumen Light Engine
Layout study based on 25 fixtures on a 30’ x 30’ space with 9’ ceilings
Illuminance Summary
Operating Cost Summary LED Source
40˚ cutoff angle
0˚
Annual Operating Cost Reduced by 43%
* Total input watts x 12hrs/day x 365 days/year x $0.10/KWH/1000 ** Replacement cost per lamp x annual hrs. of operation/lamp life *** Cutoff measured from nadir as shown:
junolightinggroup.com
Annual Operating Cost Reduced by 43%
11
1100 Lumen Light Engine
4” Round LED Downlights, SD4 Series
Dimensions
15-3/4˝
6˝
Product Specifications
13-1/8˝
4-1/4˝ Dia.
Cone • Self-flanged, clear Alzak® (SASF) satin cone with low iridescent finish is standard. • Other Alzak® finishes are available; see trim options. • Deep regression of source produces a very low glare system with 40º cut-off to lamp and lamp image.
4-3/4˝ Dia. Ceiling Cutout
Comparable light output to 26W CFL while consuming 18W
Catalog Number: SD4-1130-SAF2 PHOTOMETRIC REPORT Test Number: LTL 15467 Total Lumen Output: 909 Lumens Luminaire Efficacy: 51 lm/w (4100K), 50 lm/w (3500K), 49 lm/w (3000K) Luminaire Spacing Criteria: 1 Luminaire: Clear specular Alzak® cone. Open bottom. CIE Type: Direct
LED Light Engine • Innovative light engine utilizes remote phosphor lens and mixing chamber to ensure perfectly mixed light, resulting in uniform colors and superior color consistency from fixture to fixture. • 3000K, 3500K and 4100K color temperatures available. • CRI>80. • Light engine mounts directly to heat sink and is easily replaceable. • Light engine/reflector system produces nearly 1000 fixture lumens using 18 watts of energy and incorporates the latest generation of high lumen LEDs. • Rated for 50,000 hours at 70% lumen maintenance.
Candlepower Distribution (Candelas) Angle Candela 0° 818 5° 840 15° 880 25° 793 35° 333 45° 7 55° 0 65° 0 75° 0 85° 0
Distance to Illuminated Plane (Feet)
6’ 7’ 8’ 9’ 10’ 11’ 12’ 13’ 14’ 15’
Housing • Heavy gauge cold rolled steel with black finish. • Light engine and driver are accessible from above or below ceiling and can be upgraded to accommodate future technology improvements. Mounting Frame • Heavy gauge steel lower housing ring with factory installed spring steel friction clips securely holds cones in ceiling. • Accommodates ceilings up to 3/4” thick.
Footcandles Beam Center
22.7 16.7 12.8 10.1 8.2 6.8 5.7 4.8 4.2 3.6
Footcandles Beam Edge
7.3 5.4 4.1 3.2 2.6 2.2 1.8 1.6 1.3 1.2
Beam Diameter
7.7’ 9.0’ 10.3’ 11.5’ 12.8’ 14.1’ 15.4’ 16.7’ 18.0’ 19.2’
180
720
45°
0° 5°
Example: SD4-1130-SASF2-825
SD4 SD4
Trim Options (Select a Finish) -
11 1100 Lumens
30 3000K 35 3500K 40 4100K
2 Alzak® Finishes Clear Champagne Gold Black Pewter Wheat Bronze
White
Satin SASF CGSF BASF PASF WTSF BRSF
Semi-Specular SAQF CGQF BAQF PAQF WTQF BRQF
Painted Finish Options WHF
2 Specular SAF CGF BAF PAF WTF BRF
Options
Generation
Painted Flange Only (White) Fuse and Fuse Holder 120/277V Emergency Battery with Remote Test Switch †347 347 Volt †CP Chicago Plenum Approval 825 28” ‘C’ Channel Mounting Bars, Pair WL Wet Location F BP
† Consult Factory for Availability
12
junolightinggroup.com
Accessories
PF
SCA4-* Adapter
55°
900
Ordering Information Accessories ordered separately.
-
65°
540
Product specification subject to change without notice.
Color Temp.
75°
360
AVERAGE INITIAL FOOTCANDLES Reflectances: 80% Ceiling, 50% Walls, 20% Floors Luminaire Room Cavity Ratio Spacing RCR1 6’ x 6’ 28 8’ x 8’ 16 10’ x 10’ 10 12’ x 12’ 7
Labels and Listings • UL Listed for feed through and damp locations. • I.B.E.W. Union made. • UL and C-UL, RoHS compliant. • EMI: Complies with FCC 47, Part 15, Class A.
Catalog# Lumens
90° 85°
Initial Footcandles
LED Driver • Universal driver accommodates 120V to 277V input volts AC at 50/60hz. • Power factor > 0.9. • Easily replaceable from below or above the ceiling. • Dimmable via 0-10V protocol, increasing efficiency up to 30% while dimming.
Sloped Ceiling
*Angle must be specified when ordering. Available in 5˚, 10˚, 15˚, 20˚, 25˚, 30˚. Example: SCA4-15
15°
25°
35°
1100 Lumen Light Engine
6” Round LED Downlights, SD6 Series
Dimensions 15-3/4˝
7˝
Product Specifications
13-1/8˝
6-1/8˝ Dia. 6-3/4˝ Dia. Ceiling Cutout
Cone • Self-flanged, clear Alzak® (SASF) satin cone with low iridescent finish is standard. • Other Alzak® finishes are available; see trim options. • Deep regression of source produces a very low glare system with 40º cut-off to lamp and lamp image.
Comparable light output to 26W CFL while consuming 18W
Catalog Number: SD6-1130-SAF2 PHOTOMETRIC REPORT Test Number: LTL 15469 Total Lumen Output: 926 Lumens Luminaire Efficacy: 52 lm/w (4100K), 51 lm/w (3500K), 48 lm/w (3000K) Luminaire Spacing Criteria: 1 Luminaire: Clear specular Alzak® reflector. Open bottom. CIE Type: Direct
LED Light Engine • Innovative light engine utilizes remote phosphor lens and mixing chamber to ensure perfectly mixed light, resulting in uniform colors and superior color consistency from fixture to fixture. • 3000K. 3500K and 4100K color temperatures available. • CRI>80. • Light engine mounts directly to heat sink and is easily replaceable. • Light engine/reflector system produces nearly 1000 fixture lumens using 18 watts of energy and incorporates the latest generation of high lumen LEDs. • Rated for 50,000 hours at 70% lumen maintenance.
Candlepower Distribution (Candelas) Angle Candela 0° 912 5° 902 15° 971 25° 754 35° 364 45° 5 55° 0 65° 0 75° 0 85° 0 90° 85°
Initial Footcandles
LED Driver • Universal driver accommodates 120V to 277V input volts AC at 50/60hz. • Power factor > 0.9 at 120V input. • Easily replaceable from below or above the ceiling. • Dimmable via 0-10V protocol, increasing efficiency up to 30% while dimming.
Distance to Illuminated Plane (Feet)
6’ 7’ 8’ 9’ 10’ 11’ 12’ 13’ 14’ 15’
Housing • Heavy gauge cold rolled steel with black finish. • Light engine and driver are accessible from above or below ceiling and can be upgraded to accommodate future technology improvements. Mounting Frame • Heavy gauge steel lower housing ring with factory installed spring steel friction clips securely holds cones in ceiling. • Accommodates ceilings up to 3/4” thick.
Footcandles Beam Center
25.3 18.6 14.3 11.3 9.1 7.5 6.3 5.4 4.7 4.1
Footcandles Beam Edge
8.3 6.1 4.6 3.7 3.0 2.5 2.1 1.8 1.5 1.3
Beam Diameter
7.5’ 8.7’ 10.0’ 11.2’ 12.4’ 13.7’ 14.9’ 16.2’ 17.4’ 18.7’
200
75°
400
65°
600 800
55°
1000 45°
0° 5°
15°
25°
35°
AVERAGE INITIAL FOOTCANDLES Reflectances: 80% Ceiling, 50% Walls, 20% Floors Luminaire Room Cavity Ratio Spacing RCR1 6’ x 6’ 29 8’ x 8’ 16 10’ x 10’ 10 12’ x 12’ 7
Labels and Listings • UL Listed for feed through and damp locations. • I.B.E.W. Union made. • UL and C-UL, RoHS compliant. • EMI: Complies with FCC 47, Part 15, Class A. Product specification subject to change without notice.
Ordering Information Accessories ordered separately. Example: SD6-1130-SASF2-825 Catalog# Lumens SD6 SD6
Color Temp.
Trim Options (Select a Finish) -
11 1100 Lumens
30 3000K 35 3500K 40 4100K
2 Alzak® Finishes Clear Champagne Gold Black Pewter Wheat Bronze
White
Satin SASF CGSF BASF PASF WTSF BRSF
Semi-Specular SAQF CGQF BAQF PAQF WTQF BRQF
Painted Finish Options WHF
2 Specular SAF CGF BAF PAF WTF BRF
Accessories
Options
Generation PF
Painted Flange Only (White) F Fuse and Fuse Holder BP 120/277V Emergency Battery with Remote Test Switch †347 347 Volt †CP Chicago Plenum Approval 825 28” ‘C’ Channel Mounting Bars, Pair WL Wet Location
SCA6-* Adapter
Sloped Ceiling
*Angle must be specified when ordering. Available in 5˚, 10˚, 15˚, 20˚, 25˚, 30˚. Example: SCA6-15
† Consult Factory for Availability
junolightinggroup.com
13
1100 Lumen Light Engine
4” Round LED Wall Wash, SW4 Series
Dimensions 15-3/4˝
6˝
Product Specifications Cone • Self-flanged, specular clear Alzak® (SASF) satin cone with low iridescent finish is standard. • Other Alzak® finishes are available; see trim options. • Deep regression of source produces a very low glare system with 40º cut-off to lamp and lamp image.
3-1/4˝ 4-1/4˝ Dia.
13-1/8˝
4-3/4˝ Dia. Ceiling Cutout
Comparable light output to 26W CFL while consuming 18W
3000K, 3500K & 4100K CCT Luminaires Spaced 2’ From Wall Catalog Number: SW4-1130-SASF2 Spread: Single wall Single Unit
LED Light Engine • Innovative light engine utilizes remote phosphor lens and mixing chamber to ensure perfectly mixed light, resulting in uniform colors and superior color consistency from fixture to fixture. • 3000K, 3500K and 4100K color temperatures available. • CRI>80. • Light engine mounts directly to heat sink and is easily replaceable. • Light engine/reflector system produces nearly 1000 fixture lumens using 18 watts of energy and incorporates the latest generation of high lumen LEDs. • Rated for 50,000 hours of 70% lumen maintenance.
Lateral Distance From Fixture 2’ From Wall 0’ 1’ 2’ 3’ 4’ 22 10 1 1 1 28 16 3 1 1 16 11 4 1 1 12 9 5 2 1 9 8 5 2 1 7 6 5 3 1 5 5 4 3 2 4 4 3 3 2 3 3 3 2 2
LED Driver • Universal driver accommodates 120V to 277V input volts AC at 50/60hz. • Power factor > 0.9 • Easily replaceable from below or above the ceiling. • Dimmable via 0-10V protocol, increasing efficiency up to 30% while dimming.
Lamp
5’ 1 1 1 1 1 1 1 1 1
Multiple Units Multiple Units On 2’ Centers* On 3’ Centers* DLM-1100 Spaced 2’ Spaced 2’ 3000K, 3500K, From Wall From Wall 4100K Distance From Ceiling CL CL CL CL 1’ 24 19 24 23 7 23 2’ 34 33 34 30 15 30 3’ 24 24 24 18 15 18 4’ 22 22 22 16 15 16 5’ 20 20 20 14 14 14 6’ 17 17 17 12 12 12 7’ 15 15 15 10 11 10 8’ 13 13 13 9 9 9 9’ 10 10 10 7 7 7
* Based on minimum of five luminaires. Reflectances: 80, 50, 20. Values are rounded to nearest whole footcandle.
3000K, 3500K & 4100K CCT Luminaires Spaced 3’ From Wall Catalog Number: SW4-1130-SASF2 Spread: Single wall
Housing • Heavy gauge cold rolled steel with black finish. • Light engine and driver are accessible from above or below ceiling and can be upgraded to accommodate future technology improvements.
Single Unit Lateral Distance From Fixture 3’ From Wall 0’ 1’ 2’ 3’ 4’ 6 4 1 1 1 16 11 4 1 1 13 10 5 2 1 9 7 4 2 1 7 6 4 2 1 6 5 4 3 2 5 5 4 3 2 4 4 4 3 2 4 3 3 2 2
Mounting Frame • Heavy gauge steel lower housing ring with factory installed spring steel friction clips securely holds cones in ceiling. • Accommodates ceilings up to 3/4” thick. Labels and Listings • UL Listed for feed through and damp locations. • I.B.E.W. Union made. • UL and C-UL, RoHS compliant. • EMI: Complies with FCC 47, Part 15, Class A. Product specification subject to change without notice.
Lamp
5’ 1 1 1 1 1 1 1 1 1
Multiple Units Multiple Units On 3’ Centers* On 4’ Centers* DLM-1100 Spaced 3’ Spaced 3’ 3000K, 3500K, From Wall From Wall 4100K Distance From Ceiling CL CL CL CL 1’ 7 5 7 7 3 7 2’ 18 14 18 17 8 17 3’ 16 16 16 15 10 15 4’ 13 13 13 11 9 11 5’ 11 11 11 9 9 9 6’ 11 11 11 9 9 9 7’ 10 10 10 8 8 8 8’ 9 10 9 7 7 7 9’ 8 8 8 6 7 6
* Based on minimum of five luminaires. Reflectances: 80, 50, 20. Values are rounded to nearest whole footcandle.
Ordering Information Example: SW4-1130-SASF2-825
Catalog# Lumens SW4 SW4
Color Temp.
Trim Options (Select a Finish) -
11 1100 Lumens
30 3000K 35 3500K 40 4100K
Generation 2
Alzak® Finishes Clear Champagne Gold Black Pewter Wheat Bronze
White
Satin SASF CGSF BASF PASF WTSF BRSF
Specular SAF CGF BAF PAF WTF BRF
Painted Finish Options WHF
2
Options PF
Painted Flange Only (White) Fuse and Fuse Holder 120/277V Emergency Battery with Remote Test Switch †347 347 Volt †CP Chicago Plenum Approval 825 28” ‘C’ Channel Mounting Bars, Pair WL Wet Location F BP
† Consult Factory for Availability
14
junolightinggroup.com
1100 Lumen Light Engine
6” Round LED Wall Wash, SW6 Series Dimensions
15-3/4˝
7˝
13-1/8˝
4-5/8˝ 6-1/8˝ Dia. 6-3/4˝ Dia. Ceiling Cutout
Comparable light output to 26W CFL while consuming 18W
Product Specifications Cone • Self-flanged, specular clear Alzak® (SASF) satin cone with low iridescent finish is standard. • Other Alzak® satin finishes are available; see trim options. • Deep regression of source produces a very low glare system with 40º cut-off to lamp and lamp image.
3000K, 3500K & 4100K CCT Luminaires Spaced 3’ From Wall Catalog Number: SW6-1130-SASF2 Spread: Single wall Single Unit
LED Light Engine • Innovative light engine utilizes remote phosphor lens and mixing chamber to ensure perfectly mixed light, resulting in uniform colors and superior color consistency from fixture to fixture. • 3000K, 3500K and 4100K color temperatures available. • CRI>80. • Light engine mounts directly to heat sink and is easily replaceable. • Light engine/reflector system produces nearly 1000 fixture lumens using 18 watts of energy and incorporates the latest generation of high lumen LEDs. • Rated for 50,000 hours at 70% lumen maintenance.
Lateral Distance From Fixture 2’ From Wall 0’ 1’ 2’ 3’ 4’ 9 6 2 1 1 18 14 6 1 1 13 10 5 2 1 9 7 4 2 1 8 6 4 2 1 7 6 4 3 1 5 5 4 3 2 4 4 4 3 2 3 3 3 2 2
LED Driver • Universal driver accommodates 120V to 277V input volts AC at 50/60hz. • Power factor > 0.9. • Easily replaceable from below or above the ceiling. • Dimmable via 0-10V protocol, increasing efficiency up to 30% while dimming.
Lamp
5’ 1 1 1 1 1 1 1 1 1
Multiple Units Multiple Units On 2’ Centers* On 3’ Centers* DLM-1100 Spaced 2’ Spaced 2’ 3000K, 3500K, From Wall From Wall 4100K Distance From Ceiling CL CL CL CL 1’ 10 8 10 10 4 10 2’ 21 19 21 20 4 20 3’ 16 16 16 14 10 14 4’ 12 12 12 10 8 10 5’ 11 11 11 10 8 10 6’ 11 11 11 9 9 9 7’ 11 11 11 8 8 8 8’ 9 10 9 7 8 7 9’ 8 8 8 6 6 6
* Based on minimum of five luminaires. Reflectances: 80, 50, 20. Values are rounded to nearest whole footcandle.
3000K, 3500K & 4100K CCT Luminaires Spaced 4’ From Wall Catalog Number: SW6-1130-SASF2 Spread: Single wall
Housing • Heavy gauge cold rolled steel with black finish. • Light engine and driver are accessible from above or below ceiling and can be upgraded to accommodate future technology improvements.
Single Unit Lateral Distance From Fixture 3’ From Wall 0’ 1’ 2’ 3’ 4’ 3 3 1 1 1 10 8 5 2 1 11 9 6 3 1 8 7 5 3 1 6 5 4 2 1 5 5 3 2 2 5 4 4 2 2 4 4 3 3 2 3 3 3 2 2
Mounting Frame • Heavy gauge steel lower housing ring with factory installed spring steel friction clips securely holds cones in ceiling. • Accommodates ceilings up to 3/4” thick. Labels and Listings • UL Listed for feed through and damp locations. • I.B.E.W. Union made. • UL and C-UL, RoHS compliant. • EMI: Complies with FCC 47, Part 15, Class A. Product specification subject to change without notice.
Lamp
5’ 1 1 1 1 1 1 1 1 1
Multiple Units Multiple Units On 3’ Centers* On 4’ Centers* DLM-1100 Spaced 3’ Spaced 3’ 3000K, 3500K, From Wall From Wall 4100K Distance From Ceiling CL CL CL CL 1’ 5 4 5 4 3 4 2’ 14 14 14 12 10 12 3’ 16 16 16 13 12 13 4’ 12 13 12 10 10 10 5’ 10 10 10 8 8 8 6’ 9 9 9 7 7 7 7’ 9 9 9 7 7 7 8’ 9 9 9 7 7 7 9’ 8 8 8 6 6 6
* Based on minimum of five luminaires. Reflectances: 80, 50, 20. Values are rounded to nearest whole footcandle.
Ordering Information Example: SW6-1130-SASF2-825
Catalog# Lumens SW6 SW6
Color Temp.
Trim Options Alzak® Finish) -
11 1100 Lumens
30 3000K 35 3500K 40 4100K
Generation 2
Alzak® Finishes Clear Champagne Gold Black Pewter Wheat Bronze
White
Satin SASF CGSF BASF PASF WTSF BRSF
Specular SAF CGF BAF PAF WTF BRF
Painted Finish Options WHF
2
Options PF
Painted Flange Only (White) Fuse and Fuse Holder 120/277V Emergency Battery with Remote Test Switch †347 347 Volt †CP Chicago Plenum Approval 825 28” ‘C’ Channel Mounting Bars, Pair WL Wet Location F BP
† Consult Factory for Availability
junolightinggroup.com
15
1100 Lumen Light Engine
4” Square LED Downlights, SDSQ4 Series
Dimensions 15-3/4˝
6˝
4-1/2˝ Sq.
13-1/8˝
4-7/8˝ Sq. Ceiling Cutout
Product Specifications
Comparable light output to 26W CFL while consuming 18W
Trim • Self-flanged, clear Alzak® (SASF) satin trim with low iridescent finish is standard. • Other Alzak® finishes are available; see trim options below. • Deep regression of source produces a very low glare system. LED Light Engine • Innovative light engine utilizes remote phosphor lens and mixing chamber to ensure perfectly mixed light, resulting in uniform colors and superior color consistency from fixture to fixture. • 3000K, 3500K and 4100K color temperatures available. • CRI>80. • Light engine mounts directly to heat sink and is easily replaceable. • Light engine/reflector system uses only 18 watts of energy and incorporates the latest generation of high lumen LEDs. • Rated for 50,000 hours at 70% lumen maintenance.
Catalog Number: SDSQ4-1130-SAF2 PHOTOMETRIC REPORT Test Number: LTL 15471 Total Lumen Output: 764 Lumens Luminaire Efficacy: 45 lm/w (4100K), 42 lm/w (3500K), 40 lm/w (3000K) Luminaire Spacing Criteria: 1 Luminaire: Clear specular Alzak® reflector. Open bottom. CIE Type: Direct
LED Driver • Universal driver accommodates 120V to 277V input volts AC at 50/60hz. • Power factor > 0.9. • Easily replaceable from below or above the ceiling. • Dimmable via 0-10V protocol, increasing efficiency up to 30% while dimming.
Distance to Illuminated Plane (Feet)
6’ 7’ 8’ 9’ 10’ 11’ 12’ 13’ 14’ 15’
Mounting Frame • Heavy gauge steel lower housing ring with factory installed spring steel friction clips securely holds trims in ceiling. • Accommodates ceilings up to 3/4” thick.
Footcandles Beam Center
17.1 12.6 9.6 7.6 6.2 5.1 4.3 3.7 3.1 2.7
Footcandles Beam Edge
5.6 4.1 3.2 2.5 2.0 1.7 1.4 1.2 1.0 0.9
Product specification subject to change without notice.
Ordering Information Example: SDSQ4-1130-SASF2-825
SDSQ4 SDSQ4
Trim Options (Select a Finish) -
11 1100 Lumens
30 3000K 35 3500K 40 4100K
Alzak® Finishes Clear Champagne Gold Black Pewter Wheat Bronze
White
Specular SAF CGF BAF PAF WTF BRF
Painted Finish Options WHF
Options
Generation 2
Satin SASF CGSF BASF PASF WTSF BRSF
2
PF
Painted Flange Only (White) F Fuse and Fuse Holder BP 120/277V Emergency Battery with Remote Test Switch †347 347 Volt †CP Chicago Plenum Approval 825 28” ‘C’ Channel Mounting Bars, Pair WL Wet Location † Consult Factory for Availability
16
junolightinggroup.com
Beam Diameter
7.5’ 8.8’ 10.1’ 11.3’ 12.6’ 13.8’ 15.1’ 16.3’ 17.6’ 18.8’
AVERAGE INITIAL FOOTCANDLES Reflectances: 80% Ceiling, 50% Walls, 20% Floors Luminaire Room Cavity Ratio Spacing RCR1 6’ x 6’ 21 8’ x 8’ 12 10’ x 10’ 8 12’ x 12’ 5
Labels and Listings • UL Listed for feed through and damp locations. • I.B.E.W. Union made. • UL and C-UL, RoHS compliant. • EMI: Complies with FCC 47, Part 15, Class A.
Color Temp.
90° 85°
Initial Footcandles
Housing • Heavy gauge cold rolled steel with black finish. • Light engine and driver are accessible from above or below ceiling and can be upgraded to accommodate future technology improvements.
Catalog# Lumens
Candlepower Distribution (Candelas) Angle Candela 0° 617 5° 623 15° 667 25° 533 35° 253 45° 74 55° 10 65° 2 75° 1 85° 0
140
75°
280
65°
420 560
55°
700 45°
0° 5°
15°
25°
35°
1100 Lumen Light Engine
6” Square LED Downlights, SDSQ6 Series
Dimensions 15-3/4˝
6-3/8˝
6-1/4” Sq.
13-1/8˝
6-5/8” Sq. Ceiling Cutout
Product Specifications
Comparable light output to 26W CFL while consuming 18W
Trim • Self-flanged, clear Alzak® (SASF) satin trim with low iridescent finish is standard. • Other Alzak® finishes are available; see trim options below. • Deep regression of source produces a very low glare system. LED Light Engine • Innovative light engine utilizes remote phosphor lens and mixing chamber to ensure perfectly mixed light, resulting in uniform colors and superior color consistency from fixture to fixture. • 3000K, 3500K and 4100K color temperatures available. • CRI>80. • Light engine mounts directly to heat sink and is easily replaceable. • Light engine/reflector system uses only 18 watts of energy and incorporates the latest generation of high lumen LEDs. • Rated for 50,000 hours at 70% lumen maintenance.
Catalog Number: SDSQ6-1130-SAF2 PHOTOMETRIC REPORT Test Number: LTL 15473 Total Lumen Output: 789 Lumens Luminaire Efficacy: 46 lm/w (4100K), 42 lm/w (3500K), 42 lm/w (3000K) Luminaire Spacing Criteria: 1.23 Luminaire: Clear specular Alzak® satin reflector. Open bottom. CIE Type: Direct
LED Driver • Universal driver accommodates 120V to 277V input volts AC at 50/60hz. • Power factor > 0.9. • Easily replaceable from below or above the ceiling. • Dimmable via 0-10V protocol, increasing efficiency up to 30% while dimming.
Candlepower Distribution (Candelas) Angle Candela 0° 469 5° 488 15° 559 25° 534 35° 282 45° 85 55° 21 65° 3 75° 1 85° 0
Initial Footcandles Distance to Illuminated Plane (Feet)
6’ 7’ 8’ 9’ 10’ 11’ 12’ 13’ 14’ 15’
Housing • Heavy gauge cold rolled steel with black finish. • Light engine and driver are accessible from above or below ceiling and can be upgraded to accommodate future technology improvements. Mounting Frame • Heavy gauge steel lower housing ring with factory installed spring steel friction clips securely holds trims in ceiling. • Accommodates ceilings up to 3/4” thick.
Footcandles Beam Center
13.0 9.6 7.3 5.8 4.7 3.9 3.3 2.8 2.4 2.1
Footcandles Beam Edge
4.2 3.1 2.4 1.9 1.5 1.3 1.1 0.9 0.8 0.7
Beam Diameter
8.4’ 9.9’ 11.3’ 12.7’ 14.1’ 15.5’ 16.9’ 18.3’ 19.7’ 21.1’
90° 85°
120
75°
240
65°
360 480
55°
600 45°
0° 5°
15°
25°
35°
AVERAGE INITIAL FOOTCANDLES Reflectances: 80% Ceiling, 50% Walls, 20% Floors Luminaire Room Cavity Ratio Spacing RCR1 6’ x 6’ 24 8’ x 8’ 14 10’ x 10’ 9 12’ x 12’ 6
Labels and Listings • UL Listed for feed through and damp locations. • I.B.E.W. Union made. • UL and C-UL, RoHS compliant. • EMI: Complies with FCC 47, Part 15, Class A. Product specification subject to change without notice.
Ordering Information Example: SDSQ6-1130-SASF2-825
Catalog# Lumens SDSQ6 SDSQ6
11 1100 Lumens
Color Temp.
Trim Options (Select a Finish) -
30 3000K 35 3500K 40 4100K
2 Alzak® Finishes Clear Champagne Gold Black Pewter Wheat Bronze
White
Satin SASF CGSF BASF PASF WTSF BRSF
Specular SAF CGF BAF PAF WTF BRF
Painted Finish Options WHF
Options
Generation 2
PF
Painted Flange Only (White) F Fuse and Fuse Holder BP 120/277V Emergency Battery with Remote Test Switch †347 347 Volt †CP Chicago Plenum Approval 825 28” ‘C’ Channel Mounting Bars, Pair WL Wet Location † Consult Factory for Availability
junolightinggroup.com
17
1100 Lumen Light Engine
4” Square Wall Wash, SWSQ4 Series
Dimensions 15-3/4˝
6˝
3-1/4˝
13-1/8˝
4-1/2˝ Sq. 5˝ Sq. Ceiling Cutout
Product Specifications Trim • Self-flanged, specular clear Alzak® (SASF) satin trim with low iridescent finish is standard. • Other Alzak® finishes are available; see trim options. • Deep regression of source produces a very low glare system.
Comparable light output to 26W CFL while consuming 18W
3000K, 3500K & 4100K CCT Luminaires Spaced 2’ From Wall Catalog Number: SWSQ4-1130-SASF2 Spread: Single wall Single Unit
LED Light Engine • Innovative light engine utilizes remote phosphor lens and mixing chamber to ensure perfectly mixed light, resulting in uniform colors and superior color consistency from fixture to fixture. • 3000K, 3500K and 4100K color temperatures available. • CRI>80. • Light engine mounts directly to heat sink and is easily replaceable. • Light engine/reflector system uses only 18 watts of energy and incorporates the latest generation of high lumen LEDs. • Rated for 50,000 hours of 70% lumen maintenance.
Lateral Distance From Fixture 3’ From Wall 0’ 1’ 2’ 3’ 4’ 26 12 2 1 1 31 18 4 1 1 15 11 4 2 1 10 9 5 2 1 7 6 5 2 1 5 5 4 2 1 4 3 3 2 2 3 3 2 2 1 2 2 2 2 1
LED Driver • Universal driver accommodates 120V to 277V input volts AC at 50/60hz. • Power factor > 0.9. • Easily replaceable from below or above the ceiling. • Dimmable via 0-10V protocol, increasing efficiency up to 30% while dimming.
Lamp
5’ 1 1 1 1 1 1 1 1 1
Multiple Units Multiple Units On 2’ Centers* On 3’ Centers* DLM-1100 Spaced 3’ Spaced 3’ 3000K, 3500K, From Wall From Wall 4100K Distance From Ceiling CL CL CL CL 1’ 29 23 29 27 9 27 2’ 39 38 39 33 18 33 3’ 24 25 24 18 16 18 4’ 20 21 20 14 15 14 5’ 17 17 17 12 12 12 6’ 14 14 14 10 10 10 7’ 11 11 11 8 8 8 8’ 9 10 9 7 7 7 9’ 7 8 7 6 6 6
* Based on minimum of five luminaires. Reflectances: 80, 50, 20. Values are rounded to nearest whole footcandle.
3000K, 3500K & 4100K CCT Luminaires Spaced 3’ From Wall Catalog Number: SWSQ4-1130-SASF2 Spread: Single wall
Housing • Heavy gauge cold rolled steel with black finish. • Light engine and driver are accessible from above or below ceiling and can be upgraded to accommodate future technology improvements.
Single Unit
Mounting Frame • Heavy gauge steel lower housing ring with factory installed spring steel friction clips securely holds trims in ceiling. • Accommodates ceilings up to 3/4” thick.
Lateral Distance From Fixture 4’ From Wall 0’ 1’ 2’ 3’ 4’ 11 9 3 1 1 22 16 7 2 1 18 14 7 3 2 10 9 6 3 2 7 7 5 3 2 6 5 5 3 2 4 4 4 3 2 4 3 3 3 2 3 3 3 2 2
Labels and Listings • UL Listed for feed through and damp locations. • I.B.E.W. Union made. • UL and C-UL, RoHS compliant. • EMI: Complies with FCC 47, Part 15, Class A. Product specification subject to change without notice.
Lamp
5’ 1 1 1 1 2 2 2 2 2
Multiple Units Multiple Units On 3’ Centers* On 4’ Centers* DLM-1100 Spaced 4’ Spaced 4’ 3000K, 3500K, From Wall From Wall 4100K Distance From Ceiling CL CL CL CL 1’ 12 9 12 12 5 12 2’ 27 24 27 24 14 24 3’ 24 24 24 21 15 21 4’ 16 17 16 13 13 13 5’ 14 14 14 10 11 10 6’ 12 13 12 9 10 9 7’ 11 11 11 8 9 8 8’ 9 9 9 7 8 7 9’ 8 8 8 6 6 6
* Based on minimum of five luminaires. Reflectances: 80, 50, 20. Values are rounded to nearest whole footcandle.
Ordering Information Example: SWSQ4-1130-SASF2-825
Catalog# Lumens
Color Temp.
SWSQ4
Trim Options (Select a Finish) -
SWSQ4 11 1100 Lumens
30 3000K 35 3500K 40 4100K
2 Alzak® Finishes Clear Champagne Gold Black Pewter Wheat Bronze
White
Satin SASF CGSF BASF PASF WTSF BRSF
Specular SAF CGF BAF PAF WTF BRF
Painted Finish Options WHF
Options
Generation 2
PF
Painted Flange Only (White) F Fuse and Fuse Holder BP 120/277V Emergency Battery with Remote Test Switch †347 347 Volt †CP Chicago Plenum Approval 825 28” ‘C’ Channel Mounting Bars, Pair WL Wet Location † Consult Factory for Availability
18
junolightinggroup.com
1100 Lumen Light Engine
6” Square Wall Wash, SWSQ6 Series
Dimensions 15-3/4˝
6-3/8˝
4-3/4˝ 6-1/4˝ Sq.
13-1/8˝
Comparable light output to 26W CFL while consuming 18W
6-5/8˝ Sq. Ceiling Cutout
Product Specifications Trim • Self-flanged, specular clear Alzak® (SASF) satin trim with low iridescent finish is standard. • Other Alzak® finishes are available; see trim options. • Deep regression of source produces a very low glare system.
3000K, 3500K & 4100K CCT Luminaires Spaced 3’ From Wall Catalog Number: SWSQ6-1130-SASF2 Spread: Single wall Single Unit
LED Light Engine • Innovative light engine utilizes remote phosphor lens and mixing chamber to ensure perfectly mixed light, resulting in uniform colors and superior color consistency from fixture to fixture. • 3000K, 3500K and 4100K color temperatures available. • CRI>80. • Light engine mounts directly to heat sink and is easily replaceable • Light engine/reflector system uses only 18 watts of energy and incorporates the latest generation of high lumen LEDs. • Rated for 50,000 hours of 70% lumen maintenance.
Lateral Distance From Fixture 3’ From Wall 0’ 1’ 2’ 3’ 4’ 9 7 3 1 1 18 14 6 2 1 12 11 6 2 1 7 9 5 2 1 6 5 4 3 2 5 5 4 3 2 4 4 3 3 2 3 3 3 2 2 2 2 2 2 2
LED Driver • Universal driver accommodates 120V to 277V input volts AC at 50/60hz. • Power factor > 0.9. • Easily replaceable from below or above the ceiling. • Dimmable via 0-10V protocol, increasing efficiency up to 30% while dimming.
Lamp
5’ 1 1 1 1 1 1 1 1 1
Multiple Units Multiple Units On 3’ Centers* On 4’ Centers* DLM-1100 Spaced 3’ Spaced 3’ 3000K, 3500K, From Wall From Wall 4100K Distance From Ceiling CL CL CL CL 1’ 11 9 11 10 5 10 2’ 21 21 21 20 12 20 3’ 17 18 17 14 12 14 4’ 12 13 12 9 9 9 5’ 11 11 11 8 9 8 6’ 10 10 14 8 9 8 7’ 10 10 10 7 8 7 8’ 8 8 8 6 7 6 9’ 7 7 7 5 5 5
* Based on minimum of five luminaires. Reflectances: 80, 50, 20. Values are rounded to nearest whole footcandle.
3000K, 3500K & 4100K CCT Luminaires Spaced 4’ From Wall Catalog Number: SWSQ6-1130-SASF2 Spread: Single wall
Housing • Heavy gauge cold rolled steel with black finish. • Light engine and driver are accessible from above or below ceiling and can be upgraded to accommodate future technology improvements.
Single Unit
Mounting Frame • Heavy gauge steel lower housing ring with factory installed spring steel friction clips securely holds trims in ceiling. • Accommodates ceilings up to 3/4” thick.
Lateral Distance From Fixture 4’ From Wall 0’ 1’ 2’ 3’ 4’ 4 3 2 1 1 10 9 5 2 1 10 9 6 3 2 7 7 5 3 2 5 5 4 3 2 4 4 3 3 2 4 3 3 3 2 3 3 3 2 2 3 3 2 2 2
Labels and Listings • UL Listed for feed through and damp locations. • I.B.E.W. Union made. • UL and C-UL, RoHS compliant. • EMI: Complies with FCC 47, Part 15, Class A. Product specification subject to change without notice.
Lamp
5’ 1 1 1 1 1 1 1 2 1
DLM-1100 3000K, 3500K, 4100K Distance From Ceiling 1’ 2’ 3’ 4’ 5’ 6’ 7’ 8’ 9’
Multiple Units Multiple Units On 3’ Centers* On 4’ Centers* Spaced 4’ Spaced 4’ From Wall From Wall CL 6 14 16 13 10 9 9 8 7
6 15 17 14 10 9 9 9 8
CL 6 14 16 13 10 9 9 8 7
CL 5 12 13 10 7 7 7 7 6
4 11 13 11 8 7 7 7 6
CL 5 12 13 10 7 7 7 7 6
* Based on minimum of five luminaires. Reflectances: 80, 50, 20. Values are rounded to nearest whole footcandle.
Ordering Information Example: SWSQ6-1130-SASF2-825
Catalog# Lumens SWSQ6 SWSQ6
Color Temp.
Trim Options Alzak® Finish) -
11 1100 Lumens
30 3000K 35 3500K 40 4100K
2 Alzak® Finishes Clear Champagne Gold Black Pewter Wheat Bronze
White
Satin SASF CGSF BASF PASF WHSF BRSF
Specular SAF CGF BAF PAF WHF BRF
Painted Finish Options WHF
Options
Generation 2
PF
Painted Flange Only (White) F Fuse and Fuse Holder BP 120/277V Emergency Battery with Remote Test Switch †347 347 Volt †CP Chicago Plenum Approval 825 28” ‘C’ Channel Mounting Bars, Pair WL Wet Location † Consult Factory for Availability
junolightinggroup.com
19
2000 Lumen Light Engine
4” Round LED Downlights, SD4 Series
Dimensions
15-3/4˝
6˝
Product Specifications
13-1/8˝
4-1/4˝ Dia. 4-3/4˝ Dia. Ceiling Cutout
Cone • Self-flanged, clear Alzak® (SASF) satin cone with low iridescent finish is standard. • Other Alzak® finishes are available; see trim options. • Deep regression of source produces a very low glare system with 40º cut-off to lamp and lamp image. LED Light Engine • Innovative light engine utilizes remote phosphor lens and mixing chamber to ensure perfectly mixed light, resulting in uniform colors and superior color consistency from fixture to fixture. • 3000K, 3500K and 4100K color temperatures available. • CRI>80. • Light engine mounts directly to heat sink and is easily replaceable. • Light engine/reflector system produces nearly 2000 fixture lumens using 34 watts of energy and incorporates the latest generation of high lumen LEDs. • Rated for 50,000 hours at 70% lumen maintenance.
Comparable light output to 42W CFL while consuming 34W
Catalog Number: SD4-2030-SAF2 PHOTOMETRIC REPORT Total Lumen Output: 1727 Lumens Luminaire Efficacy: 52 lm/w (4100K), 50 lm/w (3500K), 48 lm/w (3000K) Luminaire Spacing Criteria: 1 Luminaire: Clear specular Alzak® cone. Open bottom. CIE Type: Direct
LED Driver • Universal driver accommodates 120V to 277V input volts AC at 50/60hz. • Power factor > 0.9. • Easily replaceable from below or above the ceiling. • Dimmable via 0-10V protocol, increasing efficiency up to 30% while dimming.
Candlepower Distribution (Candelas) Angle Candela 0° 1555 5° 1596 15° 1671 25° 1507 35° 632 45° 14 55° 0 65° 0 75° 0 85° 0
Distance to Illuminated Plane (Feet)
6’ 7’ 8’ 9’ 10’ 11’ 12’ 13’ 14’ 15’
Housing • Heavy gauge cold rolled steel with black finish. • Light engine and driver are accessible from above or below ceiling and can be upgraded to accommodate future technology improvements. Mounting Frame • Heavy gauge steel lower housing ring with factory installed spring steel friction clips securely holds cones in ceiling. • Accommodates ceilings up to 3/4” thick.
Footcandles Beam Center
43.1 31.7 24.3 19.2 15.6 12.9 10.8 9.1 8.0 6.8
Footcandles Beam Edge
13.9 10.3 7.8 6.1 4.9 4.2 3.4 3.0 2.5 2.3
Beam Diameter
7.5’ 8.7’ 10.0’ 11.2’ 12.4’ 13.7’ 14.9’ 16.2’ 17.4’ 18.7’
250
1000
45° 1500 1750 0° 5°
Example: SD4-2035-SASF2-825
SD4
Trim Options (Select a Finish) -
20 2000 Lumens
30 3000K 35 3500K 40 4100K
2 Alzak® Finishes Clear Champagne Gold Black Pewter Wheat Bronze
White
Satin SASF CGSF BASF PASF WTSF BRSF
Semi-Specular SAQF CGQF BAQF PAQF WTQF BRQF
Painted Finish Options WHF
2 Specular SAF CGF BAF PAF WTF BRF
Options
Generation
Painted Flange Only (White) F Fuse and Fuse Holder BP 120/277V Emergency Battery with Remote Test Switch †347 347 Volt †CP Chicago Plenum Approval 825 28” ‘C’ Channel Mounting Bars, Pair WL Wet Location † Consult Factory for Availability
20
junolightinggroup.com
Accessories
PF
SCA4-* Adapter
55°
1250
Ordering Information Accessories ordered separately.
SD4
65°
750
Product specification subject to change without notice.
Color Temp.
75°
500
AVERAGE INITIAL FOOTCANDLES Reflectances: 80% Ceiling, 50% Walls, 20% Floors Luminaire Room Cavity Ratio Spacing RCR1 6’ x 6’ 53 8’ x 8’ 30 10’ x 10’ 19 12’ x 12’ 13
Labels and Listings • UL Listed for feed through and damp locations. • I.B.E.W. Union made. • UL and C-UL, RoHS compliant. • EMI: Complies with FCC 47, Part 15, Class A.
Catalog# Lumens
90° 85°
Initial Footcandles
Sloped Ceiling
*Angle must be specified when ordering. Available in 5˚, 10˚, 15˚, 20˚, 25˚, 30˚. Example: SCA4-15
15°
25°
35°
2000 Lumen Light Engine
6” Round LED Downlights, SD6 Series
Dimensions 15-3/4˝
7˝
Product Specifications
13-1/8˝
6-1/8˝ Dia. 6-3/4˝ Dia. Ceiling Cutout
Cone • Self-flanged, clear Alzak® (SASF) satin cone with low iridescent finish is standard. • Other Alzak® finishes are available; see trim options. • Deep regression of source produces a very low glare system with 40º cut-off to lamp and lamp image. LED Light Engine • Innovative light engine utilizes remote phosphor lens and mixing chamber to ensure perfectly mixed light, resulting in uniform colors and superior color consistency from fixture to fixture. • 3000K, 3500K and 4100K color temperatures available. • CRI>80. • Light engine mounts directly to heat sink and is easily replaceable. • Light engine/reflector system produces nearly 2000 fixture lumens using 34 watts of energy and incorporates the latest generation of high lumen LEDs. • Rated for 50,000 hours at 70% lumen maintenance.
Comparable light output to 42W CFL while consuming 34W
Catalog Number: SD6-2035-SAF2 PHOTOMETRIC REPORT Total Lumen Output: 1759 Lumens Luminaire Efficacy: 53 lm/w (4100K), 52 lm/w (3500K), 49 lm/w (3000K) Luminaire Spacing Criteria: 1 Luminaire: Clear specular Alzak® reflector. Open bottom. CIE Type: Direct
LED Driver • Universal driver accommodates 120V to 277V input volts AC at 50/60hz. • Power factor > 0.9 at 120V input. • Easily replaceable from below or above the ceiling. • Dimmable via 0-10V protocol, increasing efficiency up to 30% while dimming.
Candlepower Distribution (Candelas) Angle Candela 0° 1733 5° 1714 15° 1845 25° 1433 35° 692 45° 6 55° 0 65° 0 75° 0 85° 0
Initial Footcandles Distance to Illuminated Plane (Feet)
6’ 7’ 8’ 9’ 10’ 11’ 12’ 13’ 14’ 15’
Housing • Heavy gauge cold rolled steel with black finish. • Light engine and driver are accessible from above or below ceiling and can be upgraded to accommodate future technology improvements. Mounting Frame • Heavy gauge steel lower housing ring with factory installed spring steel friction clips securely holds cones in ceiling. • Accommodates ceilings up to 3/4” thick.
Footcandles Beam Center
48.0 35.3 27.2 21.5 17.3 14.3 12.0 10.3 8.9 7.8
Footcandles Beam Edge
15.8 11.6 8.7 7.0 5.7 4.8 4.0 3.4 2.9 2.5
Beam Diameter
7.5’ 8.7’ 10.0’ 11.2’ 12.4’ 13.7’ 14.9’ 16.2’ 17.4’ 18.7’
90° 85°
200
75°
600
65°
1000 1400
55°
1800 45° 2200
0° 5°
15°
25°
35°
AVERAGE INITIAL FOOTCANDLES Reflectances: 80% Ceiling, 50% Walls, 20% Floors Luminaire Room Cavity Ratio Spacing RCR1 6’ x 6’ 55 8’ x 8’ 30 10’ x 10’ 19 12’ x 12’ 13
Labels and Listings • UL Listed for feed through and damp locations. • I.B.E.W. Union made. • UL and C-UL, RoHS compliant. • EMI: Complies with FCC 47, Part 15, Class A. Product specification subject to change without notice.
Ordering Information Accessories ordered separately. Example: SD6-2035-SASF2-825 Catalog# Lumens SD6 SD6
Color Temp.
Trim Options (Select a Finish) -
20 2000 Lumens
30 3000K 35 3500K 40 4100K
2 Alzak® Finishes Clear Champagne Gold Black Pewter Wheat Bronze
White
Satin SASF CGSF BASF PASF WTSF BRSF
Semi-Specular SAQF CGQF BAQF PAQF WTQF BRQF
Painted Finish Options WHF
2 Specular SAF CGF BAF PAF WTF BRF
Accessories
Options
Generation PF
Painted Flange Only (White) F Fuse and Fuse Holder BP 120/277V Emergency Battery with Remote Test Switch †347 347 Volt †CP Chicago Plenum Approval 825 28” ‘C’ Channel Mounting Bars, Pair WL Wet Location
SCA6-* Adapter
Sloped Ceiling
*Angle must be specified when ordering. Available in 5˚, 10˚, 15˚, 20˚, 25˚, 30˚. Example: SCA6-15
† Consult Factory for Availability
junolightinggroup.com
21
2000 Lumen Light Engine
4” Round LED Wall Wash, SW4 Series Dimensions
15-3/4˝
6˝
3-1/4˝ 4-1/4˝ Dia.
13-1/8˝
Comparable light output to 42W CFL while consuming 34W
4-3/4˝ Dia. Ceiling Cutout
Product Specifications Cone • Self-flanged, specular clear Alzak® (SASF) satin cone with low iridescent finish is standard. • Other Alzak® finishes are available; see trim options. • Deep regression of source produces a very low glare system with 40º cut-off to lamp and lamp image.
3000K, 3500K & 4100K CCT Luminaires Spaced 2’ From Wall Catalog Number: SW4-2030-SASF2 Spread: Single wall Single Unit
LED Light Engine • Innovative light engine utilizes remote phosphor lens and mixing chamber to ensure perfectly mixed light, resulting in uniform colors and superior color consistency from fixture to fixture. • 3000K, 3500K and 4100K color temperatures available. • CRI>80. • Light engine mounts directly to heat sink and is easily replaceable. • Light engine/reflector system produces nearly 2000 fixture lumens using 34 watts of energy and incorporates the latest generation of high lumen LEDs. • Rated for 50,000 hours of 70% lumen maintenance.
Lamp
Lateral Distance From Fixture 2’ From Wall 0’ 1’ 2’ 3’ 4’ 42 19 2 2 2 53 30 6 2 2 30 21 8 2 2 23 17 10 4 2 17 15 10 4 2 13 11 10 6 2 10 10 8 6 4 8 8 6 6 4 6 6 6 4 4
LED Driver • Universal driver accommodates 120V to 277V input volts AC at 50/60hz. • Power factor > 0.9 • Easily replaceable from below or above the ceiling. • Dimmable via 0-10V protocol, increasing efficiency up to 30% while dimming.
5’ 2 2 2 2 2 2 2 2 2
Multiple Units Multiple Units On 2’ Centers* On 3’ Centers* DLM-2000 Spaced 2’ Spaced 2’ 3000K, 3500K, From Wall From Wall 4100K Distance From Ceiling CL CL CL CL 1’ 46 36 46 44 13 44 2’ 65 63 65 57 29 57 3’ 46 46 46 34 29 34 4’ 42 42 42 30 29 30 5’ 38 38 38 27 27 27 6’ 32 32 32 23 23 23 7’ 29 29 29 19 21 19 8’ 25 25 25 17 17 17 9’ 19 19 19 13 13 13
* Based on minimum of five luminaires. Reflectances: 80, 50, 20. Values are rounded to nearest whole footcandle.
3000K, 3500K & 4100K CCT Luminaires Spaced 3’ From Wall Catalog Number: SW4-2030-SASF2 Spread: Single wall
Housing • Heavy gauge cold rolled steel with black finish. • Light engine and driver are accessible from above or below ceiling and can be upgraded to accommodate future technology improvements.
Single Unit
Mounting Frame • Heavy gauge steel lower housing ring with factory installed spring steel friction clips securely holds cones in ceiling. • Accommodates ceilings up to 3/4” thick.
Lateral Distance From Fixture 3’ From Wall 0’ 1’ 2’ 3’ 4’ 11 8 2 2 2 30 21 8 2 2 25 19 10 4 2 17 13 8 4 2 13 11 8 4 2 11 10 8 6 4 10 10 8 6 4 8 8 8 6 4 8 6 6 4 4
Labels and Listings • UL Listed for feed through and damp locations. • I.B.E.W. Union made. • UL and C-UL, RoHS compliant. • EMI: Complies with FCC 47, Part 15, Class A. Product specification subject to change without notice.
Lamp
5’ 2 2 2 2 2 2 2 2 2
Multiple Units Multiple Units On 3’ Centers* On 4’ Centers* DLM-2000 Spaced 3’ Spaced 3’ 3000K, 3500K, From Wall From Wall 4100K Distance From Ceiling CL CL CL CL 1’ 13 10 13 13 6 13 2’ 34 27 34 32 15 32 3’ 30 30 30 29 15 29 4’ 25 25 25 21 17 21 5’ 21 21 21 17 17 17 6’ 21 21 21 17 17 17 7’ 21 21 21 15 15 15 8’ 19 19 19 15 15 15 9’ 15 15 15 13 13 13
* Based on minimum of five luminaires. Reflectances: 80, 50, 20. Values are rounded to nearest whole footcandle.
Ordering Information Example: SW4-2030-SASF2-825
Catalog# Lumens SW4 SW4
Color Temp.
Trim Options (Select a Finish) -
20 2000 Lumens
30 3000K 35 3500K 40 4100K
2 Alzak® Finishes Clear Champagne Gold Black Pewter Wheat Bronze
White
Satin SASF CGSF BASF PASF WTSF BRSF
Specular SAF CGF BAF PAF WTF BRF
Painted Finish Options WHF
Options
Generation 2
PF
Painted Flange Only (White) Fuse and Fuse Holder 120/277V Emergency Battery with Remote Test Switch †347 347 Volt †CP Chicago Plenum Approval 825 28” ‘C’ Channel Mounting Bars, Pair WL Wet Location F BP
† Consult Factory for Availability
22
junolightinggroup.com
2000 Lumen Light Engine
6” Round LED Wall Wash, SW6 Series Dimensions
15-3/4˝
7˝
13-1/8˝
4-5/8˝ 6-1/8˝ Dia. 6-3/4˝ Dia. Ceiling Cutout
Product Specifications Cone • Self-flanged, specular clear Alzak® (SASF) satin cone with low iridescent finish is standard. • Other Alzak® satin finishes are available; see trim options. • Deep regression of source produces a very low glare system with 40º cut-off to lamp and lamp image.
Comparable light output to 42W CFL while consuming 34W
3000K, 3500K & 4100K CCT Luminaires Spaced 3’ From Wall Catalog Number: SW6-2030-SASF2 Spread: Single wall Single Unit
LED Light Engine • Innovative light engine utilizes remote phosphor lens and mixing chamber to ensure perfectly mixed light, resulting in uniform colors and superior color consistency from fixture to fixture. • 3000K, 3500K and 4100K color temperatures available. • CRI>80. • Light engine mounts directly to heat sink and is easily replaceable. • Light engine/reflector system produces nearly 2000 fixture lumens using 34 watts of energy and incorporates the latest generation of high lumen LEDs. • Rated for 50,000 hours at 70% lumen maintenance.
Lateral Distance From Fixture 3’ From Wall 0’ 1’ 2’ 3’ 4’ 17 11 4 2 2 34 27 11 2 2 25 19 10 4 2 17 13 8 4 2 15 11 8 4 2 13 11 8 6 2 10 10 8 6 4 8 8 8 6 4 6 6 6 4 4
LED Driver • Universal driver accommodates 120V to 277V input volts AC at 50/60hz. • Power factor > 0.9. • Easily replaceable from below or above the ceiling. • Dimmable via 0-10V protocol, increasing efficiency up to 30% while dimming.
Lamp
5’ 2 2 2 2 2 2 2 2 2
Multiple Units Multiple Units On 3’ Centers* On 4’ Centers* DLM-2000 Spaced 3’ Spaced 3’ 3000K, 3500K, From Wall From Wall 4100K Distance From Ceiling CL CL CL CL 1’ 19 15 19 19 8 19 2’ 40 36 40 38 21 38 3’ 30 30 30 27 19 27 4’ 23 23 23 16 15 16 5’ 21 21 21 19 15 19 6’ 21 21 21 17 17 17 7’ 21 21 21 15 15 15 8’ 17 19 17 13 15 13 9’ 15 15 15 11 11 11
* Based on minimum of five luminaires. Reflectances: 80, 50, 20. Values are rounded to nearest whole footcandle.
3000K, 3500K & 4100K CCT Luminaires Spaced 4’ From Wall Catalog Number: SW6-2030-SASF2 Spread: Single wall
Housing • Heavy gauge cold rolled steel with black finish. • Light engine and driver are accessible from above or below ceiling and can be upgraded to accommodate future technology improvements.
Single Unit
Mounting Frame • Heavy gauge steel lower housing ring with factory installed spring steel friction clips securely holds cones in ceiling. • Accommodates ceilings up to 3/4” thick.
Lateral Distance From Fixture 4’ From Wall 0’ 1’ 2’ 3’ 4’ 6 6 2 2 2 19 15 10 4 2 21 17 11 6 2 15 13 10 6 2 11 10 8 4 2 10 10 6 4 4 10 8 8 4 4 8 8 6 6 4 6 6 6 4 4
Labels and Listings • UL Listed for feed through and damp locations. • I.B.E.W. Union made. • UL and C-UL, RoHS compliant. • EMI: Complies with FCC 47, Part 15, Class A. Product specification subject to change without notice.
Lamp
5’ 2 2 2 2 2 2 2 2 2
Multiple Units Multiple Units On 3’ Centers* On 4’ Centers* DLM-2000 Spaced 4’ Spaced 4’ 3000K, 3500K, From Wall From Wall 4100K Distance From Ceiling CL CL CL CL 1’ 10 8 10 8 6 8 2’ 27 27 27 23 19 23 3’ 30 30 30 25 23 25 4’ 23 25 23 19 19 19 5’ 19 19 19 15 15 15 6’ 17 17 17 13 13 13 7’ 17 17 17 13 13 13 8’ 17 17 17 13 13 13 9’ 15 15 15 11 11 11
* Based on minimum of five luminaires. Reflectances: 80, 50, 20. Values are rounded to nearest whole footcandle.
Ordering Information Example: SW6-2030-SASF2-825
Catalog# Lumens SW6 SW6
Color Temp.
Trim Options (Select a Finish) -
20 2000 Lumens
30 3000K 35 3500K 40 4100K
2 Alzak® Finishes Clear Champagne Gold Black Pewter Wheat Bronze
White
Satin SASF CGSF BASF PASF WTSF BRSF
Specular SAF CGF BAF PAF WTF BRF
Painted Finish Options WHF
Options
Generation 2
PF
Painted Flange Only (White) Fuse and Fuse Holder 120/277V Emergency Battery with Remote Test Switch †347 347 Volt †CP Chicago Plenum Approval 825 28” ‘C’ Channel Mounting Bars, Pair WL Wet Location F BP
† Consult Factory for Availability
junolightinggroup.com
23
2000 Lumen Light Engine
4” Square LED Downlights, SDSQ4 Series
Dimensions 15-3/4˝
6˝
4-1/2˝ Sq.
Product Specifications
13-1/8˝
4-7/8˝ Sq. Ceiling Cutout
Comparable light output to 42W CFL while consuming 34W
Trim • Self-flanged, clear Alzak® (SASF) satin trim with low iridescent finish is standard. • Other Alzak® finishes are available; see trim options below. • Deep regression of source produces a very low glare system. LED Light Engine • Innovative light engine utilizes remote phosphor lens and mixing chamber to ensure perfectly mixed light, resulting in uniform colors and superior color consistency from fixture to fixture. • 3000K, 3500K and 4100K color temperatures available. • CRI>80. • Light engine mounts directly to heat sink and is easily replaceable. • Light engine/reflector system uses only 34 watts of energy and incorporates the latest generation of high lumen LEDs. • Rated for 50,000 hours at 70% lumen maintenance.
Catalog Number: SDSQ4-2030-SAF2 PHOTOMETRIC REPORT Total Lumen Output: 1452 Lumens Luminaire Efficacy: 44 lm/w (4100K), 43 lm/w (3500K), 40 lm/w (3000K) Luminaire Spacing Criteria: 1.08 Luminaire: Clear specular Alzak® reflector. Open bottom. CIE Type: Direct
LED Driver • Universal driver accommodates 120V to 277V input volts AC at 50/60hz. • Power factor > 0.9. • Easily replaceable from below or above the ceiling. • Dimmable via 0-10V protocol, increasing efficiency up to 30% while dimming.
Initial Footcandles Distance to Illuminated Plane (Feet)
6’ 7’ 8’ 9’ 10’ 11’ 12’ 13’ 14’ 15’
Housing • Heavy gauge cold rolled steel with black finish. • Light engine and driver are accessible from above or below ceiling and can be upgraded to accommodate future technology improvements. Mounting Frame • Heavy gauge steel lower housing ring with factory installed spring steel friction clips securely holds trims in ceiling. • Accommodates ceilings up to 3/4” thick.
Footcandles Beam Center
32.5 23.9 18.2 14.4 11.8 9.7 8.2 7.0 5.9 5.1
Footcandles Beam Edge
10.6 7.8 6.1 4.8 3.8 3.2 2.7 2.3 1.9 1.7
Product specification subject to change without notice.
Ordering Information Example: SDSQ4-2030-SASF2-825
SDSQ4 SDSQ4
Color Temp.
Trim Options (Select a Finish) -
20 2000 Lumens
30 3000K 35 3500K 40 4100K
Clear Champagne Gold Black Pewter Wheat Bronze
White
Satin SASF CGSF BASF PASF WTSF BRSF
Specular SAF CGF BAF PAF WTF BRF
Painted Finish Options WHF
Options
Generation 2
Alzak® Finishes
2
PF
Painted Flange Only (White) F Fuse and Fuse Holder BP 120/277V Emergency Battery with Remote Test Switch †347 347 Volt †CP Chicago Plenum Approval 825 28” ‘C’ Channel Mounting Bars, Pair WL Wet Location † Consult Factory for Availability
24
junolightinggroup.com
Beam Diameter
5’ 8.7’ 10.0’ 11.2’ 12.4’ 13.7’ 14.9’ 16.2’ 17.4’ 18.7’
AVERAGE INITIAL FOOTCANDLES Reflectances: 80% Ceiling, 50% Walls, 20% Floors Luminaire Room Cavity Ratio Spacing RCR1 6’ x 6’ 44 8’ x 8’ 25 10’ x 10’ 16 12’ x 12’ 11
Labels and Listings • UL Listed for feed through and damp locations. • I.B.E.W. Union made. • UL and C-UL, RoHS compliant. • EMI: Complies with FCC 47, Part 15, Class A.
Catalog# Lumens
Candlepower Distribution (Candelas) Angle Candela 0° 1172 5° 1184 15° 1268 25° 1014 35° 482 45° 140 55° 18 65° 4 75° 1 85° 0 90° 85°
200
75°
400
65°
600 800
55°
1000 45° 1200
0° 5°
15°
25°
35°
2000 Lumen Light Engine
6” Square LED Downlights, SDSQ6 Series
Dimensions 15-3/4˝
6-3/8˝
6-1/4” Sq.
13-1/8˝
6-5/8” Sq. Ceiling Cutout
Product Specifications
Comparable light output to 42W CFL while consuming 34W
Trim • Self-flanged, clear Alzak® (SASF) satin trim with low iridescent finish is standard. • Other Alzak® finishes are available; see trim options below. • Deep regression of source produces a very low glare system. LED Light Engine • Innovative light engine utilizes remote phosphor lens and mixing chamber to ensure perfectly mixed light, resulting in uniform colors and superior color consistency from fixture to fixture. • 3000K, 3500K and 4100K color temperatures available. • CRI>80. • Light engine mounts directly to heat sink and is easily replaceable. • Light engine/reflector system uses only 34 watts of energy and incorporates the latest generation of high lumen LEDs. • Rated for 50,000 hours at 70% lumen maintenance.
Catalog Number: SDSQ6-1130-SAF2 PHOTOMETRIC REPORT Total Lumen Output: 1498 Lumens Luminaire Efficacy: 45 lm/w (4100K), 44 lm/w (3500K), 42 lm/w (3000K) Luminaire Spacing Criteria: 1.2 Luminaire: Clear specular Alzak® satin reflector. Open bottom. CIE Type: Direct
LED Driver • Universal driver accommodates 120V to 277V input volts AC at 50/60hz. • Power factor > 0.9. • Easily replaceable from below or above the ceiling. • Dimmable via 0-10V protocol, increasing efficiency up to 30% while dimming.
Candlepower Distribution (Candelas) Angle Candela 0° 892 5° 927 15° 1061 25° 1015 35° 535 45° 162 55° 40 65° 6 75° 2 85° 0
Initial Footcandles Distance to Illuminated Plane (Feet)
6’ 7’ 8’ 9’ 10’ 11’ 12’ 13’ 14’ 15’
Housing • Heavy gauge cold rolled steel with black finish. • Light engine and driver are accessible from above or below ceiling and can be upgraded to accommodate future technology improvements. Mounting Frame • Heavy gauge steel lower housing ring with factory installed spring steel friction clips securely holds trims in ceiling. • Accommodates ceilings up to 3/4” thick.
Footcandles Beam Center
24.7 18.2 13.9 11.0 8.9 7.4 6.3 5.3 4.6 4.0
Footcandles Beam Edge
8.0 5.0 4.6 3.6 2.9 2.5 2.1 1.7 1.5 1.3
Beam Diameter
7.5’ 8.7’ 10.0’ 11.2’ 12.4’ 13.7’ 14.9’ 16.2’ 17.4’ 18.7’
90° 85°
200
75°
400
65°
600 800
55°
1000 45° 1200
0° 5°
15°
25°
35°
AVERAGE INITIAL FOOTCANDLES Reflectances: 80% Ceiling, 50% Walls, 20% Floors Luminaire Room Cavity Ratio Spacing RCR1 6’ x 6’ 46 8’ x 8’ 26 10’ x 10’ 16 12’ x 12’ 11
Labels and Listings • UL Listed for feed through and damp locations. • I.B.E.W. Union made. • UL and C-UL, RoHS compliant. • EMI: Complies with FCC 47, Part 15, Class A. Product specification subject to change without notice.
Ordering Information Example: SDSQ6-2030-SASF2-825
Catalog# Lumens SDSQ6 SDSQ6
20 2000 Lumens
Color Temp.
Trim Options (Select a Finish) -
30 3000K 35 3500K 40 4100K
2 Alzak® Finishes Clear Champagne Gold Black Pewter Wheat Bronze
White
Satin SASF CGSF BASF PASF WTSF BRSF
Specular SAF CGF BAF PAF WTF BRF
Painted Finish Options WHF
Options
Generation 2
PF
Painted Flange Only (White) F Fuse and Fuse Holder BP 120/277V Emergency Battery with Remote Test Switch †347 347 Volt †CP Chicago Plenum Approval 825 28” ‘C’ Channel Mounting Bars, Pair WL Wet Location † Consult Factory for Availability
junolightinggroup.com
25
2000 Lumen Light Engine
4” Square Wall Wash, SWSQ4 Series
Dimensions 15-3/4˝
6˝
3-1/4˝
13-1/8˝
4-1/2˝ Sq.
Comparable light output to 42W CFL while consuming 34W
5˝ Sq. Ceiling Cutout
Product Specifications Trim • Self-flanged, specular clear Alzak® (SASF) satin trim with low iridescent finish is standard. • Other Alzak® finishes are available; see trim options. • Deep regression of source produces a very low glare system.
3000K, 3500K & 4100K CCT Luminaires Spaced 2’ From Wall Catalog Number: SWSQ4-2030-SASF2 Spread: Single wall Single Unit
LED Light Engine • Innovative light engine utilizes remote phosphor lens and mixing chamber to ensure perfectly mixed light, resulting in uniform colors and superior color consistency from fixture to fixture. • 3000K, 3500K and 4100K color temperatures available. • CRI>80. • Light engine mounts directly to heat sink and is easily replaceable. • Light engine/reflector system uses only 34 watts of energy and incorporates the latest generation of high lumen LEDs. • Rated for 50,000 hours of 70% lumen maintenance.
Lateral Distance From Fixture 3’ From Wall 0’ 1’ 2’ 3’ 4’ 49 23 4 2 2 59 34 8 2 2 29 21 8 4 2 19 17 10 4 2 13 11 10 4 2 10 10 8 4 2 8 6 6 4 4 6 6 4 4 2 4 4 4 4 2
LED Driver • Universal driver accommodates 120V to 277V input volts AC at 50/60hz. • Power factor > 0.9. • Easily replaceable from below or above the ceiling. • Dimmable via 0-10V protocol, increasing efficiency up to 30% while dimming.
Lamp
5’ 2 2 2 2 2 2 2 2 2
DLM-2000 3000K, 3500K, 4100K Distance From Ceiling 1’ 2’ 3’ 4’ 5’ 6’ 7’ 8’ 9’
Single Unit Lateral Distance From Fixture 3’ From Wall 0’ 1’ 2’ 3’ 4’ 21 17 6 2 2 42 30 13 4 2 34 27 13 6 4 19 17 11 6 4 13 13 10 6 4 11 10 10 6 4 8 8 8 6 4 8 6 6 6 4 6 6 4 4 4
Labels and Listings • UL Listed for feed through and damp locations. • I.B.E.W. Union made. • UL and C-UL, RoHS compliant. • EMI: Complies with FCC 47, Part 15, Class A. Product specification subject to change without notice.
Trim Options (Select a Finish) -
20 2000 Lumens
30 3000K 35 3500K 40 4100K
Alzak® Finishes Clear Champagne Gold Black Pewter Wheat Bronze
Satin SASF CGSF BASF PASF WTSF BRSF
Specular SAF CGF BAF PAF WTF BRF
Painted Finish Options WHF
5’ 2 2 2 2 4 4 4 4 4
2
PF
Painted Flange Only (White) Fuse and Fuse Holder 120/277V Emergency Battery with Remote Test Switch †347 347 Volt †CP Chicago Plenum Approval 825 28” ‘C’ Channel Mounting Bars, Pair WL Wet Location F BP
† Consult Factory for Availability
junolightinggroup.com
17 34 30 29 23 19 15 13 11
CL 51 63 34 27 23 19 15 13 11
Multiple Units Multiple Units On 3’ Centers* On 4’ Centers* DLM-2000 Spaced 3’ Spaced 3’ 3000K, 3500K, From Wall From Wall 4100K Distance From Ceiling CL CL CL CL 1’ 23 17 23 23 10 23 2’ 51 46 51 46 27 46 3’ 46 46 46 40 29 40 4’ 30 32 30 25 25 26 5’ 27 27 27 19 21 19 6’ 23 25 23 17 19 17 7’ 21 21 21 15 17 15 8’ 17 17 17 13 15 13 9’ 15 15 15 11 11 11
Options
Generation 2
White
26
CL 51 63 34 27 23 19 15 13 11
Lamp
Example: SWSQ4-2030-SASF2-825
SWSQ4
CL 55 74 46 38 32 27 21 17 13
* Based on minimum of five luminaires. Reflectances: 80, 50, 20. Values are rounded to nearest whole footcandle.
Ordering Information
SWSQ4 -
44 72 48 40 32 27 21 19 15
3000K, 3500K & 4100K CCT Luminaires Spaced 3’ From Wall Catalog Number: SWSQ4-2030-SASF2 Spread: Single wall
Mounting Frame • Heavy gauge steel lower housing ring with factory installed spring steel friction clips securely holds trims in ceiling. • Accommodates ceilings up to 3/4” thick.
Color Temp.
CL 55 74 46 38 32 27 21 17 13
* Based on minimum of five luminaires. Reflectances: 80, 50, 20. Values are rounded to nearest whole footcandle.
Housing • Heavy gauge cold rolled steel with black finish. • Light engine and driver are accessible from above or below ceiling and can be upgraded to accommodate future technology improvements.
Catalog# Lumens
Multiple Units Multiple Units On 2’ Centers* On 3’ Centers* Spaced 3’ Spaced 3’ From Wall From Wall
2000 Lumen Light Engine
6” Square Wall Wash, SWSQ6 Series
Dimensions 15-3/4˝
6-3/8˝
4-3/4˝ 6-1/4˝ Sq.
13-1/8˝
6-5/8˝ Sq. Ceiling Cutout
Product Specifications Trim • Self-flanged, specular clear Alzak® (SASF) satin trim with low iridescent finish is standard. • Other Alzak® finishes are available; see trim options. • Deep regression of source produces a very low glare system.
Comparable light output to 42W CFL while consuming 34W
3000K, 3500K & 4100K CCT Luminaires Spaced 3’ From Wall Catalog Number: SWSQ6-2030-SASF2 Spread: Single wall Single Unit
LED Light Engine • Innovative light engine utilizes remote phosphor lens and mixing chamber to ensure perfectly mixed light, resulting in uniform colors and superior color consistency from fixture to fixture. • 3000K, 3500K and 4100K color temperatures available. • CRI>80. • Light engine/reflector system uses only 34 watts of energy and incorporates the latest generation of high lumen LEDs. • Light engine mounts directly to heat sink and is easily replaceable • Rated for 50,000 hours of 70% lumen maintenance.
Lamp
Lateral Distance From Fixture 3’ From Wall 0’ 1’ 2’ 3’ 4’ 17 13 6 2 2 34 27 11 4 2 23 21 11 4 2 13 17 10 4 2 11 10 8 6 4 10 10 8 6 4 8 8 6 6 4 6 6 6 4 4 4 4 4 4 4
LED Driver • Universal driver accommodates 120V to 277V input volts AC at 50/60hz. • Power factor > 0.9. • Easily replaceable from below or above the ceiling. • Dimmable via 0-10V protocol, increasing efficiency up to 30% while dimming.
5’ 2 2 2 2 2 2 2 2 2
Multiple Units Multiple Units On 3’ Centers* On 4’ Centers* DLM-2000 Spaced 3’ Spaced 3’ 3000K, 3500K, From Wall From Wall 4100K Distance From Ceiling CL CL CL CL 1’ 21 17 21 19 10 19 2’ 42 40 42 38 23 38 3’ 32 34 32 27 23 27 4’ 23 25 23 17 17 17 5’ 21 21 21 15 17 15 6’ 19 19 19 15 17 15 7’ 19 19 19 13 15 13 8’ 15 15 15 11 13 11 9’ 13 13 13 10 10 10
* Based on minimum of five luminaires. Reflectances: 80, 50, 20. Values are rounded to nearest whole footcandle.
3000K, 3500K & 4100K CCT Luminaires Spaced 4’ From Wall Catalog Number: SWSQ6-2030-SASF2 Spread: Single wall
Housing • Heavy gauge cold rolled steel with black finish. • Light engine and driver are accessible from above or below ceiling and can be upgraded to accommodate future technology improvements. Mounting Frame • Heavy gauge steel lower housing ring with factory installed spring steel friction clips securely holds trims in ceiling. • Accommodates ceilings up to 3/4” thick.
Single Unit Lateral Distance From Fixture 3’ From Wall 0’ 1’ 2’ 3’ 4’ 8 6 4 2 2 19 17 10 4 2 19 17 11 6 4 13 13 10 6 4 10 10 8 6 4 8 8 6 6 4 8 6 6 6 4 6 6 6 4 4 6 6 4 4 4
Labels and Listings • UL Listed for feed through and damp locations. • I.B.E.W. Union made. • UL and C-UL, RoHS compliant. • EMI: Complies with FCC 47, Part 15, Class A. Product specification subject to change without notice.
Lamp
5’ 2 2 2 2 2 2 2 4 2
Multiple Units Multiple Units On 3’ Centers* On 4’ Centers* DLM-2000 Spaced 3’ Spaced 3’ 3000K, 3500K, From Wall From Wall 4100K Distance From Ceiling CL CL CL CL 1’ 11 11 11 10 8 10 2’ 27 29 27 23 21 23 3’ 30 32 30 25 25 25 4’ 25 27 25 19 21 19 5’ 19 19 19 13 15 13 6’ 17 17 17 13 13 13 7’ 17 17 17 13 13 13 8’ 15 17 15 13 13 13 9’ 13 15 13 11 11 11
* Based on minimum of five luminaires. Reflectances: 80, 50, 20. Values are rounded to nearest whole footcandle.
Ordering Information Example: SWSQ6-2030-SASF2-825
Catalog# Lumens
Color Temp.
SWSQ6
Trim Options Alzak® Finish) -
SWSQ6 20 2000 Lumens
30 3000K 35 3500K 40 4100K
2 Alzak® Finishes Clear Champagne Gold Black Pewter Wheat Bronze
White
Satin SASF CGSF BASF PASF WHSF BRSF
Specular SAF CGF BAF PAF WHF BRF
Painted Finish Options WHF
Options
Generation 2
PF
Painted Flange Only (White) Fuse and Fuse Holder 120/277V Emergency Battery with Remote Test Switch †347 347 Volt †CP Chicago Plenum Approval 825 28” ‘C’ Channel Mounting Bars, Pair WL Wet Location F BP
† Consult Factory for Availability
junolightinggroup.com
27
1100 Lumen Light Engine
9” LED Downlight Cylinder, 9-LED Series
Comparable light output to 26W CFL while consuming 18W
Dimensions 1"
1" 3 1/4" 8 3/4" 6 1/2" 17 1/2"
17 1/2"
17 1/2"
Product Specifications Cone • Self-flanged, clear Alzak® (CS) satin cone with low iridescent finish is standard. • Other Alzak® finishes are available; see trim options. • Deep regression of source produces a very low glare system with 40º cut-off to lamp and lamp image. LED Light Engine • Innovative light engine utilizes remote phosphor lens and mixing chamber to ensure perfectly mixed light, resulting in uniform colors and superior color consistency from fixture to fixture. • 3000K, 3500K and 4100K color temperatures available. • CRI>80. • Light engine mounts directly to heat sink and is easily replaceable. • Light engine/reflector system produces nearly 1000 fixture lumens using 18 watts of energy and incorporates the latest generation of high lumen LEDs. • Rated for 50,000 hours at 70% lumen maintenance. LED Driver • Driver accommodates input universal voltages of 120/277 volts AC at 60Hz. • Power factor > 0.9. • Easily replaceable. • Dimmable via 0-10V protocol, increasing efficiency up to 30% while dimming.
6 1/8"
6 1/8"
6 1/8"
9"
9"
9"
Catalog Number: 9-LED-1130W-CL2 PHOTOMETRIC REPORT Test Number: LTL 15469 Total Lumen Output: 926 Lumens Luminaire Efficacy: 54 lm/w (4100K), 51 lm/w (3500K), 48 lm/w (3000K) Luminaire Spacing Criteria: 1 Luminaire: Clear specular Alzak® reflector. Open bottom. CIE Type: Direct
Labels and Listings • UL Listed for damp locations. • I.B.E.W. Union made. • UL and C-UL, RoHS compliant. • EMI: Complies with FCC 47, Part 15, Class A.
Candlepower Distribution (Candelas) Angle Candela 0° 912 5° 902 15° 971 25° 754 35° 364 45° 5 55° 0 65° 0 75° 0 85° 0 90° 85°
Initial Footcandles Distance to Illuminated Plane (Feet)
6’ 7’ 8’ 9’ 10’ 11’ 12’ 13’ 14’ 15’
Housing • One piece heavy gauge steel with white or black baked textured power coat finish. Mounting Frame • Available for surface, pendant or wall mounting. • Pendant mounting features hang straight pendant mounting kits that allows for mounting on to sloped ceiling with an angle up to 45º. • Hinged reveal allows single person installation.
Wall Mount
Pendant Mount
Surface Mount
Footcandles Beam Center
25.3 18.6 14.3 11.3 9.1 7.5 6.3 5.4 4.7 4.1
Footcandles Beam Edge
8.3 6.1 4.6 3.7 3.0 2.5 2.1 1.8 1.5 1.3
Beam Diameter
7.5’ 8.7’ 10.0’ 11.2’ 12.4’ 13.7’ 14.9’ 16.2’ 17.4’ 18.7’
200
75°
400
65°
600 800
55°
1000 45°
0° 5°
15°
25°
35°
AVERAGE INITIAL FOOTCANDLES Reflectances: 80% Ceiling, 50% Walls, 20% Floors Luminaire Room Cavity Ratio Spacing RCR1 6’ x 6’ 29 8’ x 8’ 16 10’ x 10’ 10 12’ x 12’ 7
Product specification subject to change without notice.
Ordering Information Accessories ordered separately. Example: 9-LED-1130B-CL1
Catalog# Lumens 9-LED 9-LED Surface Mount 9P-LED Pendant Mount 9B-LED Wall Mount
11 1100 Lumens
Color Temp.
Housing Color
Trim Options (Select a Color/Finish) -
30 3000K 35 3500K 40 4100K
W White B Black
Generation 2
Color Clear Gold Wheat Pewter Bronze White
C G WT PT BZ W
Finish Low Iridescent Alzak® Specular L Satin S Blank for White
2
Options
Accessories
White Flange Single Wall Wash Wet Location 347 Volt
P18-W 18” Hang Straight Pendant Mounting Kit, White P18-B 18” Hang Straight Pendant Mounting Kit, Black P24-W 24” Hang Straight Pendant Mounting Kit, White P24-B 24” Hang Straight Pendant Mounting Kit, Black P36-W 36” Hang Straight Pendant Mounting Kit, White P36-B 36” Hang Straight Pendant Mounting Kit, Black
WH WS WL †347
† Consult Factory for Availability
28
junolightinggroup.com
2000 Lumen Light Engine
9” LED Downlight Cylinder, 9-LED Series
Comparable light output to 42W CFL while consuming 34W
Dimensions 1"
1" 3 1/4" 8 3/4" 6 1/2" 17 1/2"
17 1/2"
17 1/2"
Product Specifications Cone • Self-flanged, clear Alzak® (CS) satin cone with low iridescent finish is standard. • Other Alzak® finishes are available; see trim options. • Deep regression of source produces a very low glare system with 40º cut-off to lamp and lamp image. LED Light Engine • Innovative light engine utilizes remote phosphor lens and mixing chamber to ensure perfectly mixed light, resulting in uniform colors and superior color consistency from fixture to fixture. • 3000K, 3500K and 4100K color temperatures available. • CRI>80. • Light engine mounts directly to heat sink and is easily replaceable. • Light engine/reflector system produces nearly 2000 fixture lumens using 34 watts of energy and incorporates the latest generation of high lumen LEDs. • Rated for 50,000 hours at 70% lumen maintenance. LED Driver • Driver accommodates input universal voltages of 120/277 volts AC at 60Hz. • Power factor > 0.9. • Easily replaceable. • Dimmable via 0-10V protocol, increasing efficiency up to 30% while dimming.
Labels and Listings • UL Listed for damp locations. • I.B.E.W. Union made. • UL and C-UL, RoHS compliant. • EMI: Complies with FCC 47, Part 15, Class A.
6 1/8"
6 1/8"
9"
9"
9"
Surface Mount
Pendant Mount
Wall Mount
Catalog Number: 9-LED-2030W-CL2 PHOTOMETRIC REPORT Total Lumen Output: 1759 Lumens Luminaire Efficacy: 53 lm/w (4100K), 52 lm/w (3500K), 49 lm/w (3000K) Luminaire Spacing Criteria: 1 Luminaire: Clear specular Alzak® reflector. Open bottom. CIE Type: Direct
Candlepower Distribution (Candelas) Angle Candela 0° 1733 5° 1714 15° 1845 25° 1433 35° 692 45° 6 55° 0 65° 0 75° 0 85° 0
Initial Footcandles Distance to Illuminated Plane (Feet)
6’ 7’ 8’ 9’ 10’ 11’ 12’ 13’ 14’ 15’
Housing • One piece heavy gauge steel with white or black baked textured power coat finish. Mounting Frame • Available for surface, pendant or wall mounting. • Pendant mounting features hang straight pendant mounting kits that allows for mounting on to sloped ceiling with an angle up to 45º. • Hinged reveal allows single person installation.
6 1/8"
Footcandles Beam Center
48.0 35.3 27.2 21.5 17.3 14.3 12.0 10.3 8.9 7.8
Footcandles Beam Edge
15.8 11.6 8.7 7.0 5.7 4.8 4.0 3.4 2.9 2.5
Beam Diameter
7.5’ 8.7’ 10.0’ 11.2’ 12.4’ 13.7’ 14.9’ 16.2’ 17.4’ 18.7’
90° 85°
200
75°
600
65°
1000 1400
55°
1800 45° 2200
0° 5°
15°
25°
35°
AVERAGE INITIAL FOOTCANDLES Reflectances: 80% Ceiling, 50% Walls, 20% Floors Luminaire Room Cavity Ratio Spacing RCR1 6’ x 6’ 55 8’ x 8’ 30 10’ x 10’ 19 12’ x 12’ 13
Product specification subject to change without notice.
Ordering Information Accessories ordered separately. Example: 9-LED-2030W-CL2
Catalog# Lumens 9-LED 9-LED Surface Mount 9P-LED Pendant Mount
20 2000 Lumens
Color Temp.
Housing Color
Trim Options (Select a Color/Finish)
30 3000K 35 3500K 40 4100K
W White B Black
Generation 2
Color Clear Gold Wheat Pewter Bronze White
C G WT PT BZ W
Finish Low Iridescent Alzak® Specular L Satin S Blank for White
2
Options
Accessories
White Flange Single Wall Wash Wet Location 347 Volt
P18-W 18” Hang Straight Pendant Mounting Kit, White P18-B 18” Hang Straight Pendant Mounting Kit, Black P24-W 24” Hang Straight Pendant Mounting Kit, White P24-B 24” Hang Straight Pendant Mounting Kit, Black P36-W 36” Hang Straight Pendant Mounting Kit, White P36-B 36” Hang Straight Pendant Mounting Kit, Black
WH WS WL †347
9B-LED Wall Mount
† Consult Factory for Availability
junolightinggroup.com
29
1300 South Wolf Road • Des Plaines, IL 60018 P H O N E (847) 827-9880 • FA X (847) 827-2925 • junolightinggroup.com Regional Offices & Warehouses: California, Georgia, Illinois, Indiana, Pennsylvania, Texas, Ontario CN
Juno is a registered trademark of Juno Lighting, LLC. Products shown in this brochure are covered by U.S. and international patents and patents pending. Specifications subject to change without notice. © 2010 JUNO LIGHTING, LLC. Printed in U.S.A.
LIT-INDY-LED 4/10
Rev. 1