02
FALL PROTECTION In This Section:
Images courtesy of Capital Safety Miller by Honeywell Ferno Australia
Harnesses & Lanyards
02-08
Fall Arrestors
02-25
Confined Space & Retrieval
02-32
Descent & Rescue
02-34
Specialised Rescue
02-38
02-01
FALL PROTECTION STANDARDS
efore undertaking any work at height or confined space entry, a risk assessment program should be developed. Refer to the Australian Standards hierarchy of control in Standard AS/NZS 18 1.4 when developing this program, as well as your local government regulatory authority. elow is an outline of the hierarchy of controls, which should be followed: UÊ UÊ UÊ UÊ UÊ
Identify all of the immediate and potential hazards Eliminate hazards if possible If the ha ard cannot be eliminated, change your working method to avoid exposure to the risk If exposure to the risk cannot be avoided, use engineering controls to contain or minimise the ha ard Fall protection equipment should be used to prevent a fall, or reduce the severity and/or injury in the event of a fall
The following relevant fall protection Australian/New Zealand Standards may be used as a reference and are recommended reading. AS/NZS 1891.1:2007
Industrial fall-arrest systems and devices - Harnesses and ancillary equipment
This Standard specifies requirements for the materials, design, manufacture and testing of harnesses, lanyards, pole straps and associated equipment including connecting devices and personal energy absorbers for industrial restraint and fall-arrest purposes. Appendices include test methods for equipment items and assemblies, and for component materials. NOTE: Fall-arrest equipment and components meeting this Standard will have been dynamically tested using a 100 kg mass. sers of greater mass are advised to consult the manufacturer. AS/NZS 1891.2: 2001
Industrial fall-arrest systems and devices – Horizontal lifelines and rail systems
AS/NZS 1891.3:1997
Industrial fall-arrest systems and devices – Fall arrest devices
AS/NZS 1891.4:2009
Industrial fall-arrest systems and devices – Selection, use and maintenance
This Standard specifies requirements and sets out recommendations for the selection, safe use and maintenance of industrial fall-arrest systems and devices based on the use of safety harnesses (including belts), hori ontal life lines and rails, fall-arrest devices, and associated lanyards, connectors, anchorages and fittings, as follows: (a) Selection requirements and recommendations for determining the types of components of the system which would be appropriate to the envisaged usage (b) Safe use requirements and recommendations relating to the safe practices to be followed in the use of components and assemblies (c) Maintenance requirements and recommendations for inspection, storage, servicing and cleaning practices Performance requirements for the various systems and components covered by this Standard are specified in AS/NZS 18 1, Parts 1, 2 and 3. NOTE: This Standard provides guidance for the selection of equipment and safe use procedures for some but not necessarily all forms of height protection or all of the circumstances under which such equipment and procedures are used.
RELATED STANDARDS
02-02
AS/NZS 4488.1:1997
Industrial Rope Access Systems – Specifications
AS/NZS 4488.2:1997
Industrial Rope Access Systems – Selection, Use & Maintenance
AS 2865:2009
Confined spaces
GLOSSARY OF FALL PROTECTION TERMINOLOGY
COMPETENT PERSON AS/NZS 18 1.4 defines a Competent Person as: A person who has, through a combination of training, education and experience, acquired knowledge and skills enabling that person to correctly perform a specified task. FALL PROTECTION Refers to the overall industry and process of protecting workers at height. FALL PREVENTION Refers to the systems and techniques that eliminate the possibility of a fall to a lower level. The most desirable method of fall prevention is to engineer out or modify the work plan to eliminate the ha ard. FALL ARREST SYSTEMS Systems that protect the worker after a fall from hitting the ground and/or obstructions below the work platform. Passive systems require little or no personal involvement from the worker. Active systems requires the worker to actively use the system in order for it to be effective. It is not always practical, cost effective or possible to employ passive systems. In these cases, a Personal Fall Arrest System (PFAS) is required. FORCE Measured in technical terms in Newtons (N). The weight of something in Newtons (N) is calculated by multiplying its mass in ilograms (kg) by the value of ravity, which is .81 (m/s2). A ilogram (kg) is a unit of mass (i.e. the weight of a static object). Force Mass x Acceleration. For rough calculation purposes: 1000N 1kN, 1kN 100kg, 10kN 1000kg. PERSONAL FALL ARREST SYSTEM (PFAS) A combination of components that when used together will arrest a person in a fall from a working level. A Personal Fall Arrest System (PFAS) typically consist of: an anchorage, full body harness, connectors and a deceleration device such as a lanyard or Self Retracting ifeline (SR ). RESCUE The ability to retrieve or rescue an individual from confined spaces or heights. Rescue must always be a component of any fall protection program. RESTRAINT TECHNIQUE Control on a person’s movement by connection to an anchorage to physically prevent the person from reaching a position at which there is a risk of a free or limited free fall. WORK POSITIONING se of fall protection components in a way that allows a worker to be supported in a harness under tension, so that a fall is prevented, e.g. the use of a pole strap.
Courtesy of Capital Safety
02-03
THE A, B, C, D OF FALL PROTECTION
The A,B,C,D of Fall Protection covers the fundamental requirements of every personal fall protection system.
A B C D
ANCHORAGE Anchorage provides a secure point of attachment (to an existing structure) for the fall arrest system. Anchorage devices can be permanent or temporary and vary to suit the type of structure available. BODY SUPPORT Full body harnesses connect the worker to the fall arrest system. They are specially designed to protect the worker against serious injury in the event of a fall whilst also remaining comfortable to wear. CONNECTORS Connectors are devices that connect the full body harness to the anchorage system. They can be single products or multiple devices working together. DESCENT/RESCUE escent and Rescue systems enable the retrieval of an injured or incapacitated worker. In the event of a rescue, this equipment facilitates rapid recovery of the worker without endangering other workers in the process.
Courtesy of Capital Safety
When setting up and using a personal fall arrest system, fall clearance is a critical issue. There must be sufficient clearance below the operator to arrest the fall before the user strikes the ground or any other object. The operator of the equipment must ensure that the system will arrest the fall within the available distance, and the user be maintained in a position post fall to allow rescue. Some factors that affect this include; anchorage location, type and length of connecting system, decelerating distance, worker height and movement of harness attachment elements. Refer to the user instructions for each product and check AS/NZS 18 1.4 for further information.
Shock Absorbing Lanyard Fall Clearance Calculation RD
Required istance elow Working Surface to Nearest Obstruction
FFD
Free Fall istance (2.0m maximum allowed)
FFD + DD + C RD
DD = Energy Absorber eceleration istance When using a DBI-SALA lanyard (1.75m for users up to 136kg) (1. 5m for users from 136kg to 160kg) -ring Slide and Harness Stretch (0.25m) C=
Clearance to Obstruction uring Fall Arrest (1.0m minimum safety factor required)
As per AS/NZS 1891.4, DD can be estimated based upon FFD in order to reduce RD.
02-04
FFD
Extension
600mm 1000mm 1500mm 2000mm
300mm 500mm 600mm 900mm
CALCULATING FALL CLEARANCE & SWING FALL HAZARDS
Fall clearance is the vertical distance needed to safely arrest a fall so that the worker does not hit the ground. To determine the required Fall Clearance add the appropriate factors together, this will give you the safe Required Distance (R ) below the working surface for work which is to be carried out where there is any risk of falling.
Self Retracting Lifeline Fall Clearance Calculation RD
Required istance elow Working Surface to Nearest Obstruction
DD
Free Fall, ock Off and eceleration (1.4m Max.) -ring Slide and Harness Stretch (0.25m)
C=
Clearance to Obstruction uring Fall Arrest (1.0m minimum safety factor required)
DD + C RD
As per AS/NZS 1891.4, DD can be estimated at 700mm. 250mm must be added for D-ring slide.
Swing Fall Hazards Swing Fall can occur when using a shock absorbing lanyard or Self Retracting ifeline (SR ) whilst working at height.
FIGURE ONE: Swing fall as a result of incorrect anchorage line positioning.
FIGURE TWO: Self Retracting Lifeline (SRL) swing fall.
A swing fall is a pendulum-like motion that can occur when the operator falls and their connector device is in a position located hori ontally away from the anchorage point. This is most likely to occur when connected to an anchorage point that is not positioned directly overhead. Precautions to avoid this ha ard include: removing working slack from the rope working line, using restraint techniques and ensuring the person does not approach a leading edge such that they may be subjected to an unplanned fall. Operators should ensure they do not subject themselves to swing fall ha ards by taking measures to avoid the risk. Refer to Figure One and Two for examples of swing fall ha ards.
Note: It is important to position your anchor point directly overhead to minimise Swing Fall Hazards. Particular attention is required when using self retracting lifelines due to the extra mobility they provide.
Courtesy of Capital Safety
02-05
INSPECTION & MAINTENANCE
As per Standard AS/NZS 18 1.4:200 and manufacturer usage instructions, fall protection equipment users must carry out a full inspection on their gear before and after each use to ensure that the items are in good working order.
Always remember: If in doubt, tag it out!
Items
Reference
Inspection Frequency (Note 1)
Personal equipment including harnesses, lanyards, connectors, fall-arrest devices including common use devices
Clause 9.2
Inspection by a Height Safety Operator and/or Height Safety Equipment Inspector (Note 2) before and after each use.
Harnesses, lanyards, associated personnel equipment
Clause 9.3.2
6 monthly inspection by a Height Safety Equipment Inspector (Note 3).
Fall-arrest devices (external inspection only)
Clause 9.3.4(a)
6 monthly inspection by a Height Safety Equipment Inspector (Note 3).
Ropes and slings
Clause 9.7
6 monthly inspection by a Height Safety Equipment Inspector (Note 3).
Anchorages—drilled-in type or attached to timber frames
Clause 9.3.3
12 monthly inspection by a Height Safety Equipment Inspector (Note 3).
Anchorages—other types
Clause 9.3.3
Up to 5 yearly inspection if recommended by the manufacturer. 12 monthly inspection is recommended by Capital Safety.
Fall-arrest devices—full service
Clause 9.3.4(b)
Up to 5 yearly service if recommended by the manufacturer. Capital Safety recommends: Type 1 – yearly, sealed type 2 and type 3 devices – two yearly, unsealed type 2 and type 3 – yearly.
Horizontal and vertical lifelines: Steel rope or rail (Ladder Safety Systems)
Clause 9.3.5
Capital Safety recommends: 5 yearly inspection for systems installed by a Capital Safety accredited installer, all other systems - yearly.
Horizontal or vertical lifelines: Fibre rope, Webbing
Clauses 9.3.5 & 9.7
6 monthly inspection by a Height Safety Equipment Inspector (Note 3).
All items of personal and common use equipment
Clause 9.4
Inspection by a Height Safety Equipment Inspector on entry or re-entry into service.
Clause 9.5
Inspection by a Height Safety Equipment Inspector before further use (Note 3).
All items which have been stressed as a result of a fall NOTES: 1. Manufacturer’s or supplier’s recommendations where provided, take precedence over the frequencies listed. Where used in harsh conditions, more frequent inspection may be required.
3. All inspections other than those by the operator are to be documented. 4. Consult with local and state regulations as some inspection requirements for items such as anchor points may require more frequent inspection.
2. If the user or operator of the equipment is not competent to carry out this inspection it is to be undertaken by another person who is competent, see Clause 9.2.
As recommended by Capital Safety, inspection scheduling for other fall protection equipment is given below. Before & After Use
6 Monthly Height Safety Equipment Inspector
Service Period
Winches, Salalift I & II, Advanced
Equipment
YES
YES
2 Year
Rescue Positioning Devices (RPD’s)
YES
YES
1 Year
Rescue and Rescumatic Controlled Descent Devices
YES
YES
1 Year
Tripod, Davit Arms, Support Structures
YES
YES
1 Year
Records of inspections and maintenance must be recorded in an inspection and maintenance log maintained by the company. Harnesses, Lineworkers Body Belts & Assemblies
Lanyard Assemblies & Pole Straps
Type 1 Fall-Arrest Devices Including Anchorage Line
Type 2/3 Fall-Arrest Devices
Mobile Attachment Devices
Fixed Anchorages, Horizontal Life Lines & Life Rails
Manufacturer’s supplier’s or installer’s name & address
YES
YES
YES
YES
YES
YES
Manufacturer’s batch number
YES
YES
YES
YES
–
–
Serial or identifying number
YES
YES
YES
YES
YES
YES
Year of manufacture
YES
YES
YES
YES
YES
–
Details of recommended connection to belts or harnesses
–
YES
YES
YES
–
–
Type of anchorage line to be used
–
–
YES
–
–
–
Suitability & limitation on various usages
YES
YES
YES
YES
YES
YES
Date of purchase
YES
YES
YES
YES
YES
YES
Date first placed into service
YES
YES
YES
YES
YES
YES
Date & details of inspection & services
YES
YES
YES
YES
YES
YES
Item to be Recorded
Courtesy of Capital Safety
02-06
i-Safe™ 3.0 INTELLIGENT SAFETY SYSTEM
AUTOMATE YOUR SAFETY INSPECTIONS AND COMPLIANCE ACTIVITIES WITH i-Safe™ 3.0. 3.0 THE MOST ADVANCED WAY TO MANAGE YOUR SAFETY INSPECTION PROGRAM AND ENHANCE COMPLIANCE. Up to date inspection status for each piece of equipment UÊ Ensures timely and consistent inspection quality UÊ Provides comprehensive documentation for a complete safety compliance program UÊ Offers standard and customisable system software solutions UÊ Tracks location and controls distribution of equipment UÊ
For more information on this product please contact your Protector Alsafe representative or customer service centre.
T H E U LT I M AT E I N FA L L P R O T E C T I O N
02-07
02
FALL PROTECTION Harnesses & Lanyards ExoFit NEX™ Riggers Harness
THE NEXT GENERATION FULL BODY HARNESS
Comfort, Function & Durability Moulded Lanyard Keepers
Hybrid Comfort Padding Stand-Up Dorsal D-ring
Covered Labels and i-Safe™
Built-In Carrying Pocket
sFront and rear Tech-Lite™ aluminium D-rings sConfined space loops sDuo-Lok™ quick connect buckles sRevolver™ vertical torso adjusters sIntegrated suspension trauma straps provide relief in a fall sRip-stitch indicator allows the user to quickly and easily inspect the harness for impact loading sREPEL™ technology webbing with non-slip hybrid comfort padding si-Safe™ enabled to track inspections and control inventory Applications s2IGGING LADDERCLIMBINGAND confined space access work Specifications sApproved to AS/NZS 1891.1:2007
ENABLED
Reflective Material
Revolver™ Vertical Torso Adjusters
Impact Indicator
FALL PROTECTION
REPELTM Technology Webbing
02
603M2018 Tech-Lite™ Aluminium D-rings Rigid Hip Padding Loops
Integrated Suspension Relief Straps
Duo-Lok™ Quick-Connect Buckles
Get into the Best! Ultra-Soft Edging Not all features available on all models across the range.
fall protection experts: | height safety | confined space | industrial rescue
www.capitalsafety.com.au
Description Riggers harness Riggers harness Riggers harness Riggers harness Riggers harness with dorsal extension Riggers harness with dorsal extension Riggers harness with dorsal extension Riggers harness with dorsal extension Riggers harness with stainless steel hardware Riggers harness with stainless steel hardware Riggers harness with stainless steel hardware Riggers harness with stainless steel hardware Riggers harness with miners belt strap Riggers harness with miners belt strap Riggers harness with miners belt strap Riggers harness with miners belt strap Riggers harness with stainless steel hardware and miners belt strap Riggers harness with stainless steel hardware and miners belt strap Riggers harness with stainless steel hardware and miners belt strap Riggers harness with stainless steel hardware and miners belt strap
ExoFit NEX™ Confined Space Harness
ExoFit NEX™ Cross-over Harness
sFront, rear and side Tech-Lite™ aluminium D-rings sConfined space loops sDuo-Lok™ quick connect buckles with memory-fit web-lok ensures fast non-slipping connections sRevolver™ vertical torso adjusters sIntegrated suspension trauma straps provide relief in a fall sWide padded lower back/hip pad sRip-stitch indicator allows the user to quickly and easily inspect the harness for impact loading sREPEL™ technology webbing with non-slip hybrid comfort padding si-Safe™ enabled to track inspections and control inventory Applications s#ONlNEDSPACEACCESSWORK ladder access and rescue Specifications sApproved to AS/NZS 1891.1:2007
sFront and rear Tech-Lite™ aluminium D-rings sDuo-Lok™ quick connect buckles sRevolver™ vertical torso adjusters sIntegrated suspension trauma straps provide relief in a fall sRip-stitch indicator allows the user to quickly and easily inspect the harness for impact loading sREPEL™ technology webbing with non-slip hybrid comfort padding si-Safe™ enabled to track inspections and control inventory Applications s2OOFCONSTRUCTION MAINTENANCE and ladder access work Specifications sApproved to AS/NZS 1891.1:2007
ENABLED
Mfr No. 623S2018 623M2018 623L2018 623XL2018
02-08
Mfr No. 603S2018 603M2018 603L2018 603XL2018 603S2019 603M2019 603L2019 603XL2019 603S1022 603M1022 603L1022 603XL1022 603S2020 603M2020 603L2020 603XL2020 603S1020 603M1020 603L1020 603XL1020
Size S M L XL
Part No. 0997 6661 0997 6440 0997 6882 0998 7422
Mfr No. 613S2016 613M2016 613L2016 613XL2016
Size S M L XL
Part No. 0997 6644 0997 6423 0997 6865 0998 7439
603M2018 Size S M L XL S M L XL S M L XL S M L XL S M L XL
Part No. 0997 6627 0997 6406 0997 6848 0998 7575 0997 6763 0997 6542 0997 6984 0998 7541 0997 6746 0997 6525 0997 6967 0998 7507 0997 6780 0997 6559 0997 7001 0998 7558 0997 6797 0997 6576 0997 7018 0998 7524
ENABLED
FALL PROTECTION Harnesses & Lanyards
02
ExoFit NEX™ Climbing Harness
ExoFit NEX™ Derrickmans Harness
sFront, rear, side and abdominal Tech-Lite™ aluminium D-rings sDuo-Lok™ quick connect buckles with memory-fit web-lok ensures fast non-slipping connections sPadded lower back/hip pad sFront belay loops, tool and gear loops sREPEL™ technology webbing with non-slip hybrid comfort padding si-Safe™ enabled to track inspections and control inventory Applications s2ESCUEANDEMERGENCYSERVICES industrial rope access, abseiling and tower work Specifications sApproved to AS/NZS 1891.1:2007 sConforms to AS/NZS 4488.1:1997 and AS/NZS 4488.2:1997
sFront, rear (with extension), side and lower back Tech-Lite™ aluminium D-rings sDuo-Lok™ quick connect buckles with memory-fit web-lok ensures fast non-slipping connections sRevolver™ vertical torso adjusters sIntegrated suspension trauma straps provide relief in a fall sWide padded lower back/hip pad sSeat sling with positioning/suspension D-rings sRip-stitch indicator allows the user to quickly and easily inspect the harness for impact loading sREPEL™ technology webbing with non-slip hybrid comfort padding si-Safe™ enabled to track inspections and control inventory Applications sIdeal for use by oil industry personnel when working on the derrick/monkey board Specifications sApproved to AS/NZS 1891.1:2007
Size S M L XL
Part No. 0997 6712 0997 6491 0997 6933 0998 7405
ENABLED
ExoFit NEX™ Tower Workers Harness sFront, rear and side Tech-Lite™ aluminium D-rings sDuo-Lok™ quick connect buckles with memory-fit web-lok ensures fast non-slipping connections sRevolver™ vertical torso adjusters sIntegrated suspension trauma straps provide relief in a fall sContoured back pad and drop down buttock strap provide comfort for restraint and suspension activities sRip-stitch indicator allows the user to quickly and easily inspect the harness for impact loading sREPEL™ technology webbing with non-slip hybrid comfort padding si-Safe™ enabled to track inspections and control inventory Applications s#LIMBING SUSPENSION POSITIONING or rescue Specifications sApproved to AS/NZS 1891.1:2007 Mfr No. Size 653S4016 S 653M4016 M 653L4016 L 653XL4016 XL
Mfr No. 693S4017 693M4017 693L4017 693XL4017
ExoFit NEX™ Flotation Harness s275N Integral personal flotation device sRear stainless steel D-ring sFront fall arrest loops sStainless steel quick connect buckles sIntegrated suspension trauma straps provide relief in a fall sRip-stitch indicator allows the user to quickly and easily inspect the harness for impact loading sREPEL™ technology webbing with non-slip hybrid comfort padding si-Safe™ enabled to track inspections and control inventory sAvailable with 275N Med/SOLAS personal flotation device – open waters use on vessels Applications s)DEALFORBOTHFALLANDBUOYANCYPROTECTIONINOPENORCLOSEDWATERS Specifications sApproved to AS/NZS 1891.1:2007
ENABLED
ExoFit NEX™ Sit Harness
Mfr No. 673S4002 673M4002 673L4002 673XL4002
Size S M L XL
Part No. 0997 6695 0997 6474 0997 6916 0998 7592
Part No. 0997 6729 0997 6508 0997 6950 0998 7456
ENABLED
Part No. 0997 6678 0997 6457 0997 6899 0998 7609
sSide Tech-Lite™ aluminium D-rings sDuo-Lok™ quick connect buckles with memory-fit web-lok ensures fast non-slipping connections sPadded lower back/hip pad sFront belay loops and tool and gear loops sREPEL™ technology webbing with non-slip hybrid comfort padding si-Safe™ enabled to track inspections and control inventory Applications s2ESCUEANDEMERGENCYSERVICES industrial rope access and abseiling work Specifications sApproved to AS/NZS 1891.1:2007 sConforms to AS/NZS 4488.1:1997 and AS/NZS 4488.2:1997
Size S M L XL
FALL PROTECTION
Mfr No. 683S4016 683M4016 683L4016 683XL4016
ENABLED
02
ENABLED
603M1034 Mfr No. 603S1034 603M1034 603L1034 603XL1034 603S1036 603M1036 603L1036 603XL1036
Description Flotation harness 275N Flotation harness 275N Flotation harness 275N Flotation harness 275N Flotation harness 275N SOLAS Flotation harness 275N SOLAS Flotation harness 275N SOLAS Flotation harness 275N SOLAS
Size S M L XL S M L XL
603M1034
Part No. 0997 6593 0997 6372 0997 6814 0998 7473 0997 6610 0997 6389 0997 6831 0998 7490
To order, call 132 832 or log on to www.protectoralsafe.com.au
02-09
02
FALL PROTECTION Harnesses & Lanyards Delta™ REPEL™ Riggers Harness sLarge rear fall arrest rated D-ring sFront fall arrest rated D-ring sConfined space/retrieval attachment points sQuick connect buckles sStainless steel hardware sREPEL™ technology webbing si-Safe™ enabled to track inspections and control inventory Applications sRigging, confined space, ladder access and general height safety Specifications sApproved to AS/NZS 1891.1:2007
Repels Liquids Repels water, dirt & oil (prevents wicking) Fast drying Ideal for utilities applications
FALL PROTECTION
Naturally Self-Cleaning Enhanced hygiene - Reduces risk of mould, grime & odours - Easy decontamination Ideal for water & sewerage applications
Enhanced Durability Up to 5 times more abrasion resistant Stainless hardware on all harness models Ideal for heavy duty applications and harsh environments
Standard webbing
after 1000 abrasion cycles
after 1000 abrasion cycles
| height safety | confined space | industrial rescue
www.capitalsafety.com
Size S M L XL
Part No. 0981 3206 0981 3223 0981 3240 0981 3257
Delta™ REPEL™ Linesmans Harness sLarge rear fall arrest rated D-ring with dorsal extension sFront fall arrest rated loops sWaist belt with wide padded lower back pad sPadded work positioning buttock seat with large pole tanged D-rings sQuick connect buckles sStainless steel hardware sREPEL™ technology webbing si-Safe™ enabled to track inspections and control inventory Applications sIdeal for use by linesmen for climbing, suspension, positioning or rescue Specifications sApproved to AS/NZS 1891.1:2007 Mfr No. 543S1017 543M1017 543L1017 543XL1017
fall protection experts:
02
Size S M L XL
Delta™ REPEL™ Tower Workers Harness
sLarge rear fall arrest rated D-ring sFront fall arrest rated D-ring sConfined space/retrieval attachment points sWaist belt with large side D-rings for work positioning sQuick connect buckles sStainless steel hardware sREPEL™ technology webbing si-Safe™ enabled to track inspections and control inventory Applications sIdeal for use in multi purpose access, including rigging, confined space entry, ladder access and work positioning at height Specifications sApproved to AS/NZS 1891.1:2007
sLarge rear fall arrest rated D-ring sFront fall arrest rated loops sWaist belt with wide padded lower back pad, tool loops, and side tanged D-rings for work positioning sPadded work positioning buttock seat with large pole tanged D-rings sQuick connect buckles sStainless steel hardware sREPEL™ technology webbing si-Safe™ enabled to track inspections and control inventory Applications s#LIMBING SUSPENSION POSITIONINGORRESCUE Specifications sApproved to AS/NZS 1891.1:2007
Size S M L XL
Part No. 0981 3274 0981 3291 0981 3308 0981 3325
ENABLED
Mfr No. 553S1015 553M1015 553L1015 553XL1015
Size S M L XL
ENABLED
Part No. 0981 3342 0981 3359 0981 3376 0981 3393
Delta™ REPEL™ All Purpose Harness
Mfr No. 533S1018 533M1018 533L1018 533XL1018
02-10
REPEL™ webbing
Mfr No. 503S1018 503M1018 503L1018 503XL1018
ENABLED
Part No. 0981 3410 0981 3427 0981 3444 0981 3461
ENABLED
FALL PROTECTION Harnesses & Lanyards
CHOOSING THE CORRECT PERSONAL PROTECTIVE EQUIPMENT (PPE)
Mfr No. 531S0016 531M0016 531L0016 531XL0016
Size S M L XL
ENABLED
Part No. 0776 4672 0771 5576 0776 4689 0059 9258
Personal Protective Equipment (PPE) including helmets, gloves and eye protection are often overshadowed by the focus on fall protection equipment (harnesses and lanyards) when employees are set work tasks which involve working at height.
Delta™ Riggers Harness sFall arrest rated front and rear D-rings sConfined space loops sEasy adjustable hardware sPolyester webbing construction for added durability si-Safe™ enabled to track inspections and control inventory Applications s2IGGING CONlNEDSPACE LADDERACCESSANDGENERALHEIGHTSAFETY Specifications sApproved to AS/NZS 1891.1:2007
Mfr No. 320S-0018 320M-0018 320L-0018 320XL-0018
Size S M L XL
ENABLED
Delta™ All Purpose Harness
Mfr No. 380S-0018 380M-0018 380L-0018 380XL-0018
Size S M L XL
Head protection must be considered due to injury from objects falling from above, even when working at height, and while there are complex controls which need to be implemented to reduce the risk of objects falling from above; workers can help protect themselves by wearing a suitable Australian Standard safety helmet with a fitted chin strap. loves are also a critical piece of equipment when working at height. Aside from protecting workers from sharp objects and hot surfaces, the correct glove will also reduce the severity of rope burns should a fall occur. loves that provide the greatest amount of fine motor dexterity are the best selection. Some activities when working at height require intricate movements to manipulate snap hooks and karabiners, poorly fitting and poorly designed gloves do nothing to assist workers that are required to connect and disconnect themselves from various connection points.
Part No. 0776 4621 0599 7165 0607 8102 0835 7037
sFall arrest rated front and rear D-rings sWaist belt with large side D-rings for work positioning sConfined space loops sEasy adjustable hardware sPolyester webbing construction for added durability si-Safe™ enabled to track inspections and control inventory Applications s#ONlNEDSPACEENTRY RIGGING ladder access work and work positioning at height Specifications sApproved to AS/NZS 1891.1:2007
Choosing the correct Personal Protective Equipment (PPE) is a critical aspect of planning for any job. When it comes to working at height, the correct selection of Personal Protective Equipment (PPE) could literally mean the difference between life and death.
ENABLED
FALL PROTECTION
Delta™ Resist Harness sConstructed from Resist technology webbing sEasy to care for, wipes clean in seconds sLarge rear fall arrest rated stand-up D ring for easy connection sFront fall arrest loops sWaist belt with large side D-rings for work positioning si-Safe™ enabled to track inspections and control inventory Applications sPetrochemical, painting, water treatment, food processing and general industry Specifications sApproved to AS/NZS 1891.1:2007
02
02
Eye protection and height safety go hand in hand, and is often overlooked. The ability for workers to clearly see their working environment and equipment is important when working at heights. The appropriate eye protection will not only reduce the risk of workers injuring their eyes from foreign objects such as dust, fibres and filings, chemicals and ltra Violet ( V) radiation, but can also reduce the risk associated with glare which can make it difficult to see potential ha ards such as incorrectly fitted or connected equipment. In summary, Personal Protective Equipment (PPE) should not be looked at in isolation. Rather, individual items including helmets, gloves, eye protection and harnesses need to be used together along with higher level controls to ensure that workers are as safe as they can possibly be in the workplace. All injuries are preventable.
Part No. 0776 4706 0599 7114 0776 4723 0835 7071
To order, call 132 832 or log on to www.protectoralsafe.com.au
02-11
02
Delta™ Roof Workers Harness
Delta™ Live Line Harness and Lanyard
sFall arrest rated front and rear D-rings sWaist belt with side D-rings for work positioning sEasy adjustable hardware sPolyester webbing construction for added durability si-Safe™ enabled to track inspections and control inventory Applications s2IGGING CONlNEDSPACE LADDERACCESS and general height safety Specifications sApproved to AS/NZS 1891.1:2007
sResistant to electrical conductivity sRear fall arrest rated webbing loop with integrated dorsal extension sConfined space loops sNo metal hardware above the waist sLeather insulators sFront fall arrest/belay loops si-Safe™ enabled to track inspections and control inventory Applications sIdeal for use when working on high and low voltage live lines from an Elevated Work Platforms (EWP) vehicle s,IVE,INE+ITINCLUDES 1 x Delta™ live line harness (305M-0019) 1 x Ez-Stop™ live line lanyard (Z95170606) 1 x Storage bag (1900-0000)
FALL PROTECTION
Mfr No. 360S-0016 360M-0016 360L-0016 360XL-0016
02
FALL PROTECTION Harnesses & Lanyards
Size S M L XL
ENABLED
Specifications sApproved to AS/NZS 1891.1:2007
Part No. 0776 4638 0599 7148 0776 4655 0982 7945
Delta™ Tower Workers Harness sFall arrest rated front and rear D-rings sConfined space loops sPadded waist belt with side D-rings sPole/Restraint D-rings sFront fall arrest/belay loops si-Safe™ enabled to track inspections and control inventory Applications s#LIMBING SUSPENSION POSITIONINGORRESCUE Specifications sApproved to AS/NZS 1891.1:2007
ENABLED
Mfr No. 305S-0019 305M-0019 305L-0019 Z95170606 Z95170945RP 1900-0039
Description Live line harness Live line harness Live line harness Live line lanyard Live line lanyard Live line kit
Size S M L 1.7m 1.7m –
Part No. 0764 0759 0764 0776 0764 0793 0764 0810 0764 0827 0764 0844
Nomex®/Kevlar® Harness & Lanyards
Mfr No. 370S-0018 370M-0018 370L-0018 370XL-0018
Size S M L XL
sNomex®/Kevlar® webbing for flame, heat and cut resistance sKevlar thread/stitching increases resistance to heat, cuts and abrasion si-Safe™ enabled to track inspections and control inventory Delta™ Harness sDielectric hardware for non-conductive, non-sparking applications Force2™ Lanyards s16kN Gate strength on all hooks removes the risk of accidental disengagement from excessive gate loadings sLatch Protection Device (LPD) on all hooks reduces the risk of unintentional ‘tripping of the hooks’ locking gate on double action hooks Applications s5TILITYINDUSTRY HIGH VOLTAGEELECTRICALENVIRONMENTSANDWELDING Specifications sApproved to AS/NZS 1891.1:2007
Part No. 0777 1336 0777 1319 0777 1353 0835 7054
Delta™ Miners Harness sFall arrest rated front and rear D-rings sIntegral miners belt with reflective tape, battery and self rescue straps sConfined space loops sEasy adjustable hardware sSuspension trauma straps si-Safe™ enabled to track inspections and control inventory Applications sIdeal for use by mining industry personnel for use with battery packs and self rescuers Specifications sApproved to AS/NZS 1891.1:2007
ENABLED
Elasticated Lanyard Mfr No. 383S-0434 383M-0434 383L-0434 383XL-0434
02-12
ENABLED
Size S M L XL
Part No. 0781 2680 0781 2697 0781 2714 0781 2731
Mfr No. Description 320S2066NK Nomex®/Kevlar® Harness 320M2066NK Nomex®/Kevlar® Harness 320L2066NK Nomex®/Kevlar® Harness Z90200909NK Nomex®/Kevlar® lanyard non elasticated Z90200909NKE Nomex®/Kevlar® lanyard elasticated
Size S M L 2m 2m
Part No. 0841 1301 0841 1318 0841 1335 0841 1352 0841 1369
ENABLED
02
FALL PROTECTION Harnesses & Lanyards
sLarge fall arrest rated rear stand-up D-ring for easy connection sFall arrest rated frontal D-ring for work positioning and rescue sAdjustable chest, shoulder and leg straps sQuick donning and easy adjustable hardware sPelvic strap for added security Applications sRigging, rescue, construction, Elevated Work Platforms (EWP), ladder access and general height safety Specifications sApproved to AS/NZS 1891.1:2007
Mfr No. AB11343PS
Size M
Part No. 0819 0386
Protecta Green Confined Space Retrieval Harness sLarge fall arrest rated rear stand-up D-ring for easy connection sFall arrest rated frontal D-ring for work positioning and rescue sSliding shoulder D-rings sAdjustable chest, shoulder and leg straps sQuick donning and easy adjustable hardware sPelvic strap for added security Applications sRigging, confined space, construction, work positioning, restraint work and general height safety Specifications sApproved to AS/NZS 1891.1:2007
Mfr No. AB11643PS
Size M
Part No. 0819 0403
GLOSSARY OF FALL PROTECTION TERMINOLOGY ANCHORAGE A secure point of attachment for lifelines or deceleration devices, e.g. lanyards and Self Retracting ifelines (SR ). ANCHORAGE CONNECTOR Provides a connection point onto an anchorage or building structure in order to attach the rest of the fall arrest system. CONNECTOR A device used to join together components of a personal fall arrest system or parts of a component within the system. DOUBLE OR TRIPLE ACTION DEVICE A self-closing hook or karabiner with a keeper latch which will automatically close and remain closed until manually operated. These units have a minimum of two (double) or three (triple) distinct and deliberate consecutive actions to manually open them. KARABINER A connector with a self-closing gate that can be manually locked or that automatically locks, and is used to attach to a fall protection component. Can be double action or triple action. POLE STRAP A work positioning strap designed to be placed around a pole and attached at two points on each side of a line worker’s fall arrest harness while the wearer is working on the pole. SNAP HOOK A connector with a hook shaped body that has an opening for attachment to a fall protection component and a self-closing gate to retain the component within the opening. Hooks must be double-acting to be compliant.
02
Courtesy of Capital Safety
Protecta Green Pole Work Harness
HOOK LEGEND
sLarge fall arrest rear D-ring sFall arrest rated frontal D-ring sIntegrated shoulder and lower back pads sWaist belt with side D-rings for work positioning sQuick donning and easy adjustable hardware sAdjustable chest, shoulder and leg straps sSub-pelvic strap for extra protection Applications sRigging, mining, construction and general industrial applications requiring a work positioning belt Specifications sApproved to AS/NZS 1891.1:2007
To assist with determining the type of hook/s provided on lanyards and fall arrest devices, please refer to the legend below.
Mfr No. AB10443PS
Size M
SNH SCH TAK
FALL PROTECTION
Protecta Green Basic Climbing Harness
Snap Hook Scaffold Hook Triple Action Karabiner
Mfr No. M1010004 M1010005 M1010006
Description Lanyard single adjustable with SNH Lanyard single adjustable with SNH/SCH Lanyard single adjustable with 4!+
Length m 2.0 2.0 2.0
Part No. 0640 4434 0640 4451 0640 4468
Part No. 0819 0420
To order, call 132 832 or log on to www.protectoralsafe.com.au
02-13
02
FALL PROTECTION Harnesses & Lanyards
EZ Stop® Shock Absorbing Webbing Lanyard – Single Tail
Resist Shock Absorbing Webbing Lanyard
sConstructed from heavy duty 45mm polyester webbing sIncludes double action snap hook for attachment to harness fall arrest point and anchorage sShock absorbing unit encased in Ultra Violet (UV) resistant plastic for easy inspection sRated to 160kg si-Safe™ enabled to track inspections and control inventory Applications sFall arrest, work positioning and restraint Specifications sApproved to AS/NZS 1891.1:2007
Mfr No. Z90203636
Description Lanyard single with SNH
Length m 2
ENABLED
Mfr No. Z91200909
EZ Stop Shock Absorbing Adjustable Webbing Lanyards – Single Tail
FALL PROTECTION
sConstructed from heavy duty 45mm polyester webbing sIncludes double action snap hook for attachment to harness fall arrest point and anchorage sLanyard adjusts from 750mm up to a maximum of 2m in length to control free fall/work positioning distance sAdjustable lanyard allows the user to have a shorter tie-off point and minimise free fall distance sShock absorber unit encased in Ultra Violet (UV) resistant transparent plastic for easy inspection sRated to 160kg si-Safe™ enabled to track inspections and control inventory Applications s&ALLARREST WORKPOSITIONINGANDRESTRAINT Specifications sApproved to AS/NZS 1891.1:2007
Description Lanyard single with SNH
Length m 2
Part No. 0771 5593
Adjustable Shock Absorbing Webbing Lanyard – Single Tail ENABLED
Z51200909
sConstructed from heavy duty 45mm polyester webbing sIncludes double action snap hooks for attachment to harness fall arrest point and anchorage sShock absorber unit encased in Ultra Violet (UV) resistant transparent plastic for easy inspection sLanyard adjusts from 750mm to a maximum of 2m in length to control free fall/work positioning distance sAdjustable lanyard allows the user to have a shorter tie-off point and minimise free fall distance sRated to 160kg Applications s&ALLARREST WORKPOSITIONINGANDRESTRAINT Specifications sApproved to AS/NZS 1891.1:2007
Z51200934 Mfr No. Z51200909 Z51200934
Description Length m Lanyard single adjustable with SNH 0.75 – 2 Lanyard single adjustable with SNH/SCH 0.75 – 2
Part No. 0614 7139 0982 7826
Mfr No. AE529ADJ/3AU
EZ Stop® Adjustable Shock Absorbing Kernmantle Rope Lanyard – Single Tail sStatic 11mm kernmantle rope resists minor cuts, abrasions, knotting, twisting, chemicals, grime and bird caging sIncludes stainless steel triple action karabiners for attachment to harness fall arrest point and anchorage sLanyard adjusts from 750mm up to a maximum of 2m in length to control free fall/work positioning distance sAdjustable lanyard allows the user to have a shorter tie-off point and minimise free fall distance sRated to 160kg si-Safe™ enabled to track inspections and control inventory Applications s&ALLARREST WORKPOSITIONINGANDRESTRAINT Specifications sApproved to AS/NZS 1891.1:2007
Description Lanyard single adjustable with SNH
Length m 0.75 – 2
Part No. 0640 5471
Protecta Green Lanyards
ENABLED
sIncludes double action snap hooks for attachment to harness fall arrest point and anchorage sShock absorbing unit encased in Ultra Violet (UV) resistant transparent plastic for easy inspection AE529TPS sElasticated polyester webbing reduces trip fall hazards, dragging and catching for complete freedom of movement sTwin tail style helps you remain connected at all times sEnd connectors consist of double action scaffold hooks for easy connection to anchorage points during attached climbing Applications sFall arrest, work positioning and restraint Specifications sApproved to AS/NZS 1891.1:2007
AE529SPS
AE529TPS
Mfr No. ZP67110204560X
02-14
Description Lanyard single adjustable with TAK
ENABLED
Part No. 0445 0182
®
02
sConstructed from unique polyester webbing incorporating Resist technology for ultimate protection, durability and longevity sDeflects debris that causes abrasion, will not fray and is cut and tear resistant sEasy to care for, wipes clean in seconds sIncludes double action snap hooks for attachment to harness fall arrest point and anchorage sSpecialised fall arrest lanyard resistant to grease, oil, paint, dirt and grime sRated to 160kg si-Safe™ enabled to track inspections and control inventory Applications s&ALLARREST WORKPOSITIONINGANDRESTRAINT Specifications sApproved to AS/NZS 1891.1:2007
Length m 0.75 – 2
Part No. 0982 1468
Mfr No. AE529SPS AE529TPS
Description Lanyard single with SNH Lanyard twin elasticated with SNH/SCH
Length m 2 2
Part No. 0819 0454 0819 0471
02
FALL PROTECTION Harnesses & Lanyards Force2™ REPEL™ Shock Absorbing Webbing Lanyards – Single Tail
Elasticated Webbing Lanyard – Twin Tail
sConstructed from REPEL™ technology webbing sIncludes double action snap hooks for attachment to harness fall arrest point and anchorage sShock absorbing unit encased in Ultra Violet (UV) resistant transparent plastic for easy inspection sLatch protection device (LPD) on all hooks reduces the risk of unintentional ‘tripping of the hooks’ locking gate s16kN Gate strength on all hooks removes the risk of accidental disengagement from excessive gate loadings sRated to 160kg si-Safe™ enabled to track inspection and control inventory Applications s&ALLARREST WORKPOSITIONINGANDRESTRAINT
ENABLED
sElasticated polyester webbing reduces trip fall hazards, dragging and catching for complete freedom of movement sDouble tail style helps you remain connected at all times sShock absorbing unit encased in Ultra Violet (UV) resistant transparent plastic for easy inspection sRated to 160kg si-Safe™ enabled to track inspection and control inventory Applications sFall arrest, work positioning and restraint Specifications sApproved to AS/NZS 1891.1:2007
ENABLED
Specifications sApproved to AS/NZS 1891.1:2007
Description Lanyard twin elasticated with SNH/SCH
Length m 2
Part No. 0059 9275
Wire Cable Lanyards Z90200909RP Mfr No. Z90200909RP Z51200909RP Z51204545RP Z90200909ERP Z90200919ERP
Description Lanyard single with SNH Lanyard single adjustable with SNH Lanyard single adjustable with TAK Lanyard single elasticated with SNH Lanyard single elasticated with SNH/SCH
sPolyvinyl Chloride (PVC) coated wire cable lanyard for use in harsh environments, providing the ultimate in durability and longevity sShock absorbing unit encased in Ultra Violet (UV) resistant transparent plastic for easy inspection sIncludes double action snap hooks for attachment to harness fall arrest point and anchorage sAvailable in single and twin tail sRated to 160kg si-Safe™ enabled to track inspections and control inventory Applications sWork positioning, restraint and assisted climbing Specifications sApproved to AS/NZS 1891.1:2007
Z90200909ERP Length m 2 0.75 – 2 0.75 – 2 2 2
Part No. 0981 3478 0981 3512 0982 1485 0981 3546 0981 3563
Force2™ REPEL™ Shock Absorbing Webbing Lanyards – Twin Tail sConstructed from REPEL™ technology webbing sIncludes double action snap hooks for attachment to harness fall arrest point sEnd connectors consist of double action scaffold hooks for easy connection to achorage points during attached climbing sShock absorbing unit encased in Ultra Violet (UV) resistant transparent plastic for easy inspection sLatch Protection Device (LPD) on all hooks reduces the risk of unintentional ‘tripping of the hooks’ of the hooks’ locking gate s16kN Gate strength on all hooks removes the risk of accidental disengagement from excessive gate loadings sRated to 160kg si-Safe™ enabled to track inspection and control inventory Applications s&ALLARREST WORKPOSITIONINGANDRESTRAINT Specifications sApproved to AS/NZS 1891.1:2007
Z60200919RP Mfr No. Z60200919RP Z53200919RP Z60200919ERP Z60200979ERP
Description Lanyard twin with SNH/SCH Lanyard twin adjustable with SNH/SCH Lanyard twin elasticated with SNH/SCH Lanyard twin elasticated with SNH/SCH
Z70200909
ENABLED
Mfr No. Z70200909 Z40203636
Description Lanyard single with SNH Lanyard twin with SNH
Length m 2 2
Part No. 0059 9292 0059 9309
Part No. 0981 3495 0981 3529 0981 3580 0981 3597
02
REPEL™ Pole Straps sConstructed from REPEL™ technology webbing sIncludes double action snap hooks for attachment to harness sEasy and efficient adjustment system (easy adjuster), can be adjusted whilst working sLatch protection device (LPD) on all hooks reduces the risk of unintentional ‘tripping of the hooks’ locking gate s16kN Gate strength on all hooks removes the risk of accidental disengagement from excessive gate loadings si-Safe™ enabled to track inspection and control inventory Applications sWork positioning, restraint and assisted climbing Specifications sApproved to AS/NZS 1891.1:2007
Z60200919ERP Length m 2 0.75 – 2 2 2
ENABLED
FALL PROTECTION
Mfr No. Z60203634E
ENABLED
E613RPY0250909 Mfr No. E613RPY0250909 E613RPY0300909 E613RPY0350909
Description Pole strap with SNH Pole strap with SNH Pole strap with SNH
Length m 2.5 3 3.5
Part No. 0981 3614 0981 3631 0981 3648
To order, call 132 832 or log on to www.protectoralsafe.com.au
02-15
FALL PROTECTION
02
02
FALL PROTECTION Harnesses & Lanyards
Height Safety Kits
Suspension Trauma Safety Strap
sCompact kits for easy transportation and storage si-Safe™ enabled to track inspection and control inventory s0ROFESSIONAL2OOF7ORKERS+ITINCLUDES 1 x Delta™ roof workers harness (360M-0016) 1 x 15m Rope and rope grab 1 x Ez-Stop™ 1m shock absorbing lanyard (Z90103636) 1 x 1.5m Tie-off adaptor (E849-015) 1 x Karabiner (R-105-S) 1 x Storage bag (1900-0000) s#ONSTRUCTION7ORKERS+ITINCLUDES 1 x Delta™ all-purpose harness (380M-0018) 1 x Talon® Self Retracting Lifeline (SRL) 2.4m fall arrestor (3101020) 1900-0004 1 x Ez-Stop™ 2.0m shock absorbing lanyard (Z90203636) 1 x 1.5m Tie-off adaptor (E849-015) 1 x Storage bag (1900-0000) Applications sRoof workers kit: suits most roofing height situations sConstruction workers kit: suits most construction height situations Specifications sComplies with AS/NZS 1891.1:2007
sAllows the worker who is suspended to stand up in their harness to relieve pressure sInstallation to your harness is fast and efficient – just choke off the strap and it’s ready sExtremely compact and lightweight design stays out of the worker’s way sDeployment and operation is fool-proof, simply unzip and hook straps together sContinuous loop design allows for either one or two-foot suspension relief without pinching sSafety accessory that can be attached to most harness brands Applications sHelps prevent the effects of suspension trauma after a fall
ENABLED
Mfr No. 9501403
Part No. 0614 7122
Harness Hydration System Mfr No. 1900-0005 1900-0004
Description Roof workers kit Construction workers kit
Part No. 0486 3843 0620 2576
Roof Workers Kit sCompact kit for easy transportation and storage s+ITINCLUDES 1 x Protecta basic harness with front and rear D-Rings 1 x 15m Kernmantle rope lifeline assembly system (with integral shock absorbing lanyard, rope grab, sewn end stop and karabiners) 1 x Anchor strap 1 x Storage bag Applications sSpecifically designed for roof workers, particularly those required to work on building edges Specifications sApproved to AS/NZS 1891.1:2007 Mfr No. AA400AUPS
1900-0005
sSimple clip-on design that attaches to any harness sQuick release hose prevents entanglements s1.5L Capacity allows worker a convenient hydration for added safety and productivity sZip-up nylon carrier protects the system and provides easy access for filling sCompact design keeps water source close to the body without getting in the worker’s way sAnti-microbial, taste free tubing and reservoir keep liquid fresh at all times while dual hose ports provide worker access over either shoulder sNo-leak bite valve delivers liquid easily hands free and the bite valve cover keeps dirt away while protecting from damage Applications sAssists in maintaining hydration while working at heights
Mfr No. 1150174
Size litre 1.5
Part No. 0709 8510
Part No. 0819 0488
Lanyard Cover Construction Workers Kit sCompact kit for easy transportation and storage s+ITINCLUDES 1 x PRO™ fall arrest climbing harness with front and rear fall arrest D-rings (AB11343) 1 x 3.3m Rebel™ compact self retracting lifeline (AD111ARA) 1 x 1.5m round anchor strap (AM450/150AU) 1 x Storage bag (AKO66AU-BKP) Applications sKit designed to suit most construction height situations Specifications sComplies with AS/NZS 1891.1:2007
Mfr No. AA410AU
02-16
Part No. 0640 5556
sHighly resistant Polyvinyl Chloride (PVC) protective cover – tough, durable and lightweight sProvides protection from dirt, cuts, abrasion, oil, paint and other chemicals sProvides additional protection when working over structures or leading edges where the lanyard can be accidentally sheared in the event of a fall Applications sDesigned for use with shock absorbing fall arrest lanyards with 45mm wide webbing tails, or rope tails to prevent damage and prolong the life of your lanyard
Mfr No. AK145
Size mm 145 x 120
Part No. 0771 5610
Not recommended for use on elasticated lanyard tails
Need Height Safety Training? It’s important to have the correct safety equipment, but even more important is to know how to use it correctly in the workplace. Protector Alsafe Training Services is a Registered Training Organisation (RTO Provider No. 21897) that provides its customers with the very best in competency-based workplace safety training. Maintaining an extensive footprint in the safety training sector, Protector Alsafe is able to provide comprehensive training packages, as well as accredited and non-accredited training, whether you are based in a metropolitan or remote area of Australia. Protector Alsafe Training & Services offers a wide range of courses, divided into 2 types; Workplace Safety Training, covering courses such as; UÊ Working Safely at Height UÊ Enter a Confined Space UÊ Fire Safety UÊ Operate Vehicle Emergency Response Team Training, covering courses such as; UÊ ndertake Vertical Rescue UÊ Confined Space Rescue UÊ Road Accident Rescue To talk to us about your training requirements; Call: 132 832 Online: www.protectoralsafe.com.au Email: training protectoralsafe.com.au
02-17
02
FALL PROTECTION Harnesses & Lanyards
HARNESS INSPECTION AND FITTING SIMPLE STEPS FOR HARNESS USE Correct fitting, use and maintenance will ensure years of safe, trouble-free operation. Follow these simple steps as a part of your routine.
STEP 1 INSPECTION
Check the labels for the harness serial number and ensure the serial number is legible and the date for withdrawal has not passed.
Run your hands along each piece of webbing looking for cuts, abrasions, burn marks or deterioration. Check sewn patterns looking for cuts, broken threads, heat damage and stretching.
Check the harness hardware including -ring and buckles for distortion, cracking and damage.
STEP 2 FITTING
FALL PROTECTION
VEST STYLE HARNESS 1
2
1 Remove harness from packaging. Hold the back -ring and gently shake harness so all straps fall into place. 2 nbuckle leg and chest strap buckles – ift the top plate to align with the bottom plate slot and guide plate through.
3
4
5
3 Slip harness over the shoulders (like a vest) and ensure the -ring is located in the middle of the back between the shoulder blades. 4 Fasten chest strap buckle.
6
5 Fasten waist belt buckle. 6 Pull left leg strap between legs and fasten with corresponding buckle. Repeat the process with the right leg strap. o not cross straps between legs. Ensure a snug unrestrictive fit.
CROSS-OVER CHEST STYLE HARNESS 1
2
3
4
5
6
02 1 Remove harness from packaging. Hold the back -ring and gently shake harness so all straps fall into place. 2 nbuckle leg and chest strap buckles – ift the top plate to align with the bottom plate slot and guide plate through.
3 Place arms up through the harness.
5 Pull the harness down the body to position the leg straps.
4 Slip harness over the head (like a jumper) then locate the frontal -ring in the middle of the chest and the rear -ring between shoulder blades.
6 Pull left leg strap between legs and fasten with corresponding buckle. Repeat the process with the right leg strap. o not cross straps between legs. Ensure a snug unrestrictive fit.
STEP 3 ADJUSTMENT FASTENING
TIGHTENING
Tilt buckle and align with the Feed webbing through the slot and guide plate through. buckle. Secure by moving the keeper.
Courtesy of Miller by Honeywell
02-18
LOOSENING
SHOULDERS
Move the keeper up the Tilt the keeper, and whilst strap and reposition buckle holding onto the top piece of for more room. webbing underneath, move the keeper up the webbing.
WAIST
LEGS
For harnesses with waist straps, pass the excess webbing through the keeper to secure.
The slide keepers on the leg straps should be positioned to the front. Make sure the leg straps are not twisted.
FALL PROTECTION Harnesses & Lanyards
02
MILLER REVOLUTION™ HARNESSES
Miller Revolution™ 2 Point Harnesses
Innovative harness design engineered with unique components and features to improve efficiency and safety.
sVersatile frontal and rear oversized fall attachment points sErgoArmor™ back shield protects from snap hook and lifeline injury sKnitted mesh membrane for optimal air circulation and comfort sErgonomic PivotLink™ allows greater hip rotation and mobility sWeb finials provide quick webbing adjustment and organisation sHybrid, with strong and durable DuraFlex™/DualTech® webbing Applications sConstruction and maintenance, ladder safety systems, roof workers, Elevated Work Platforms (EWP), tower climbing, static line systems and order pickers Specifications sApproved to AS/NZS 1891.1:2007
Size S M L
Part No. 0684 5839 0684 5805 0684 5856
Miller Revolution™ Vest Harness
ErgoArmor
back shield
ualTech® webbing
Quick connect buckles
Easy. Safe. Smart. Miller Revolution harnesses have been developed to help you work smarter and safer. ualTech® webbing for quick donning and extra comfort. Web finials tie up loose ends. ErgoArmor ack Shield protects against snap hook and lifeline injury. Quick connect buckles and one hand adjustment promotes non-slip snug fit. Get into the revolution.
PRODUCT RANGE eading manufacturers are constantly developing new technologies within the safety industry and we work with them, evaluating their products to provide you with a wide range of safety equipment that is fit for purpose, ensuring you are protected correctly from head to toe.
s400mm Extension of rear fall arrest soft-eye D-ring sFrontal fall arrest attachment and confined space shoulder loops sAdjustable chest, waist, shoulder and legstraps sHybrid of black polyester webbing and DuraFlex™ webbing for improved durability and comfort sLabel pack with lanyard parking ring, stores harness documents Applications sConstruction and maintenance, ladder safety systems, roof workers, Elevated Work Platforms (EWP), tower climbing, static line systems and order pickers Specifications sApproved to AS/NZS 1891.1:2007
Mfr No. M1020098
Size M
Part No. 0794 2951
FALL PROTECTION
Mfr No. M1020053 M1020054 M1020055
02
Miller Revolution™ Tower Harness sRear 400mm D-ring extension and frontal fall arrest attachment sPelvic D-rings for work positioning and confined space rescue loops sErgoArmor™ back shield protects from snap hook and lifeline injury sAdjustable chest, waist, shoulder and leg straps sLumbar, buttock padding, and mesh membrane add comfort sQuick adjust, comfortable, durable polyester/DuraFlex™ webbing sAlso available in size small and large on request Applications sTower climbing, Elevated Work Platforms (EWP), tree pruning, work positioning and confined space Specifications sApproved to AS/NZS 1891.1:2007
Mfr No. M1020056
Size M
Part No. 0724 9691
To order, call 132 832 or log on to www.protectoralsafe.com.au
02-19
02
FALL PROTECTION Harnesses & Lanyards
DURAFLEX™
DuraFlex™ Roof Workers Harness
Innovative DuraFlex™ webbing allows the harness to flex with the body.
sFrontal and rear D-rings for working in fall arrest sLabel pack with lanyard parking ring, stores harness documents sOver the head design with adjustable leg straps sDuraFlex™ webbing provides optimum worker comfort Applications sRoofing, tower and ladder work, general construction and maintenance Specifications sApproved to AS/NZS 1891.1:2007
uraFlex provides workers with an alternative to rigid webbing products, working with the movements of the human body naturally. There is no bunching, binding or kinking of the webbing, which is generally associated with harness wearing. With uraFlex , you can look forward to greater mobility, movement, and less fatigue resulting in increased worker productivity. uraFlex harnesses provide unsurpassed worker comfort and offer wider user acceptance. A comfortable harness is more likely to be worn, which increases worker safety and compliance on the job site. DuraFlex™ webbing’s unique construction has enough stretch to provide all day comfort.
FALL PROTECTION
Mfr No. STRETCH GUARD
02
Size M
Part No. 0340 2268
DuraFlex™ Maintenance Harness DuraFlex™ Confined Space Harness s300mm Extension of rear fall arrest soft-eye D-ring sFrontal fall arrest loops sConfined space shoulder loops sLabel pack with lanyard parking ring, stores harness documents sAdjustable shoulder and leg straps sQuick connect buckles on leg straps Applications sConstruction, maintenance, confined space, iron work and shipping Specifications sApproved to AS/NZS 1891.1:2007
sFrontal fall arrest attachment point, rear and extended dorsal D-ring sEasy to don with fully adjustable chest, shoulder and leg straps sLabel pack with lanyard parking ring, stores harness documents sBrightly coloured webbing to increase worker visibility sConfined space loops on shoulder straps Applications sConstruction, maintenance, scaffolding, ladder safety systems, confined space rescue and Elevated Work Platforms (EWP) Specifications sApproved to AS/NZS 1891.1:2007
Mfr No. M1020073 Mfr No. M1020004D
Size M
Size M
Part No. 0724 9555
Part No. 0580 0373
DuraFlex™ Glove and Barrier Harness DuraFlex™ Riggers Harness sFrontal fall arrest attachment point, rear and extended dorsal D-ring sConfined space loops and work positioning side D-rings sEasy to don with fully adjustable chest, shoulder and leg straps sWaist belt offering greater back support and stability sLabel pack with lanyard parking ring, stores harness documents sBrightly coloured webbing to increase worker visibility Applications sConstruction, maintenance, scaffolding, ladder safety systems, confined space rescue, Elevated Work Platforms (EWP) and work positioning Specifications sApproved to AS/NZS 1891.1:2007 Mfr No. M1020068
02-20
Size M
Part No. 0724 9572
s500mm Extension of rear fall arrest soft-eye D-ring sFrontal fall arrest attachment and confined space shoulder loops sAdjustable leg and chest straps sDuraFlex™ webbing provides optimum worker comfort sLabel pack with lanyard parking ring, stores harness documents Applications sLive wire applications, Elevated Work Platforms (EWP) and confined spaces Specifications sApproved to AS/NZS 1891.1:2007
Mfr No. M1020008
Size M
Part No. 0607 7881
FALL PROTECTION Harnesses & Lanyards
02
POLYESTER
Polyester Construction Harness
Polyester webbing harnesses are heavy duty, yet lightweight and suited to many applications.
sFrontal fall arrest attachment point and rear dorsal D-ring sEasy to don with fully adjustable chest, shoulder and leg straps sLabel pack with lanyard parking ring, stores harness documents sBrightly coloured webbing to increase worker visibility Applications sConstruction, maintenance, scaffolding and warehousing Specifications sApproved to AS/NZS 1891.1:2007
Polyester harnesses are available in a range of configurations to suit many working applications and environments. right colours help to increase the visibility of the harness, enabling better visual worker compliance and easier inspection of harnesses. The shoulder and leg straps are a different colour for ease of donning. Manufactured from heavy duty and lightweight polyester webbing, strength is increased without compromising the users comfort. The polyester webbing also offers users excellent ltra Violet ( V) and strong chemical resistance. Incorporating innovative sewing patterns, polyester harnesses maintain their exibility long term. The new self-contained label pack allows important information to be kept legible and safe.
Size M
Part No. 0724 9504
Polyester Maintenance Harness Polyester Confined Space Harness s300mm Extension of rear fall arrest soft-eye D-ring sFrontal fall arrest and confined space loops on shoulder straps sAdjustable shoulder and padded leg straps sEquipped with a label pack housing all relevant harness information including donning and connection instructions, certification and inspection documents Applications sConstruction, maintenance, confined space and rescue, iron work and shipping Specifications sApproved to AS/NZS 1891.1:2007
sFrontal fall arrest attachment point, rear and extended dorsal D-ring sEasy to don with fully adjustable chest, shoulder and leg straps sLabel pack with lanyard parking ring, stores harness documents sConfined space loops on shoulder straps sBrightly coloured webbing to increase worker visibility Applications sConstruction, maintenance, scaffolding, warehousing, roof work and confined space Specifications sApproved to AS/NZS 1891.1:2007
Mfr No. M1020065 Mfr No. M1020004
Size M
Size M
Part No. 0724 9521
Part No. 0533 5168
FALL PROTECTION
Mfr No. M1020063
02
Polyester Line Workers Harness Polyester Riggers Harness sFrontal fall arrest attachment point, rear and extended dorsal D-ring sConfined space loops and work positioning side D-rings sEasy to don with fully adjustable chest, shoulder and leg straps sBack pad offering greater back support and stability sLabel pack with lanyard parking ring, stores harness documents sBrightly coloured webbing to increase worker visibility Applications sConstruction, maintenance, scaffolding, ladder safety systems, confined space rescue, Elevated Work Platforms (EWP) and work positioning Specifications sApproved to AS/NZS 1891.1:2007 Mfr No. M1020067
Size M
Part No. 0724 9538
sFrontal fall arrest D-ring and extended dorsal D-ring sWork positioning side D-rings for work with pole straps sFully adjustable waist, shoulder, leg and buttock straps sLabel pack with lanyard parking ring, stores harness documents sLumbar and buttock padding offering greater comfort Applications sLine workers, pole top workers, tower and ladder work Specifications sApproved to AS/NZS 1891.1:2007
Mfr No. ELITE.2
Size M
Part No. 0724 9589
To order, call 132 832 or log on to www.protectoralsafe.com.au
02-21
02
Polyester AMAX.1 Work Positioning Harness
Welders Harness
sFrontal fall arrest, rear dorsal and work positioning D-rings sStep in harness with padded leg straps and lumbar support sAdjustable leg and shoulder straps sLabel pack with lanyard parking ring, stores harness documents Applications sRescue, ladder work, work positioning, window cleaning and utilities Specifications sApproved to AS/NZS 1891.1:2007
sFlame retardant Kevlar® webbing enhances strength and provides resistance to high temperatures sFrontal and rear fall arrest attachments sAdjustable leg and shoulder straps sLabel pack with lanyard parking ring, stores harness documents sConfined space loops on KMAX.2 Applications sWelding and grinding at heights, and harsh work environments Specifications sApproved to AS/NZS 1891.1:2007
FALL PROTECTION
Mfr No. AMAX.1
02
Size M
Part No. 0098 4970
Mfr No. M1020066 M1020100 M1020102
Description KMAX.1 2 Point welding harness KMAX.2 Vest style harness KMAX.3 Basic vest style harness
Size M M M
Part No. 0724 9606 0797 3585 0998 6895
Polyester AMAX.2 Work Positioning Harness
Contractor Value Plus Harness
sRear dorsal fall arrest D-Ring, front fall arrest D-Ring and work positioning kick out side D-Rings for working with pole straps sQuick connect buckles on leg straps and openable front for ease of donning sExtra wide back and removable shoulder pads offering greater support and comfort when hanging or working for long periods of time sAll padding complete with moisture absorbing 3D mesh panel sTool loops to attach equipment temporarily when working at height sFully adjustable waist and shoulder straps sEquipped with a label pack housing all relevant harness information including donning and connection instructions Applications s4OWERWORK RESCUEOPERATIONS roof and ladder work Specifications sApproved to AS/NZS 1891.1:2007
sFrontal fall arrest attachment point and rear dorsal D-ring sIntegrated 2m shock absorbing lanyard sEasy to don with fully adjustable chest, shoulder and leg straps sLabel pack with lanyard parking ring, stores harness documents Applications sElevated Work Platforms (EWP), construction and general maintenance Specifications sApproved to AS/NZS 1891.1:2007
Mfr No. M1020122
Size M
Part No. 0992 0935
Mfr No. M1020064
Size M
Part No. 0724 9623
Polyester Tower Workers Harness
Contractor Value 2 Point Harness
sFrontal fall arrest attachment loops s300mm Extended dorsal D-ring sConfined space loops and work positioning side D-rings sLabel pack with lanyard parking ring, stores harness documents sLumbar and buttock padding equipped with tool loops Applications sElectrical, ladder and tower work, tree pruning, Elevated Work Platforms (EWP), confined space and rescue Specifications sApproved to AS/NZS 1891.1:2007
sMinimal restriction to wearer’s movement sLightweight cross over design, easy to fit and adjust sRear and frontal fall arrest attachment points sLabel pack with lanyard parking ring, stores harness documents Applications sBuilding and construction, ladder and roof work, Elevated Work Platforms (EWP) and general maintenance Specifications sApproved to AS/NZS 1891.1:2007
Mfr No. TOWER WORKER
02-22
FALL PROTECTION Harnesses & Lanyards
Size M
Part No. 0340 2285
Mfr No. M1020002
Size M
Part No. 0730 6029
M1020102
02
Duraclean Miners Harnesses
Miller Manyard® Lanyard
sRear dorsal fall arrest D-ring and D-Ring extension sFloating frontal fall arrest D-ring sFully adjustable leg straps sQuick connect buckles on the leg straps sEquipped with confined space loops sWider back pad offering greater back support and stability sEquipped with a label pack housing all relevant harness information including donning and connection instructions, and inspection grid sUnderground version includes prospector belt, stainless steel hardware and aluminium quick connect buckles Applications sSurface and underground mining Specifications sApproved to AS/NZS 1891.1:2007
sSpecially woven shock absorbing inner core reduces fall forces sNo energy absorber pack makes it more comfortable to use sHeavy duty tubular outer sleeve serves as back up lanyard sUnique warning flag provides visual proof of a sustained fall sGrid label allows easy recording of inspection dates s19mm Double acting hooks at each end Applications sAny work at height application, Elevated Work Platforms (EWP), scaffolding, construction, maintenance, work positioning and restraint applications Specifications sApproved to AS/NZS 1891.1:2007
Mfr No. M1020157 M1020158 M1020159 M1020160 M1020161 M1020162 M1020163 M1020164
Description Underground miners harness Underground miners harness Underground miners harness Underground miners harness Surface miners harness Surface miners harness Surface miners harness Surface miners harness
Size S M L XL S M L XL
Part No. 0998 6827 0998 6844 0998 6861 0998 6878 0998 7133 0998 7150 0998 7167 0998 7184
Prospector Miners Equipment Belts sWider padded back for increased support sPadded back complete with 3D mesh material for greater sweat absorption sLonger battery strap for maximum adjustment of self rescuer and battery pack sFully adjustable with quick connect buckles Applications sMining and underground work sMust be worn in conjunction with a full body fall protection harness when working at height Specifications sComplies with AS/NZS 1891.4:2009 Mfr No. M1020123 M1020124 M1020125
Size S M L
Part No. 0992 0969 0992 1003 0992 1020
Explorer Miners Equipment Belts sWider padded back for increased support and comfort sShoulder pads for added comfort sPadded back complete with 3D mesh material for greater sweat absorption sFully adjustable with quick connect buckles sLonger battery strap for maximum adjustment of self rescuer and battery pack sComplete with tool loops for hanging additional tools Applications sMining and underground work sMust be worn in conjunction with a full body fall protection harness when working at height Specifications sComplies with AS/NZS 1891.4:2009 Mfr No. M1020126 M1020127 M1020128
Size S M L
Part No. 0049 8397 0049 8414 0049 8431
Mfr No. M1010024
Description Lanyard single elasticated with SNH
Length m 2.0
Part No. 0648 9672
Miller Stretchstop® Lanyard sUnique stretchable lanyard design that minimises the length of the lanyard preventing tripping or snagging sElastic inner core contains the unextended length of webbing sOuter load bearing tubular polyester webbing sReliable visual inspection if a fall has been taken sAvailable in single or twin leg versions Applications sAny work at height application, Elevated Work Platforms (EWP), scaffolding, construction, maintenance, work positioning and restraint applications Specifications sApproved to AS/NZS 1891.1:2007 LD18SEC2.0
STRETCHSTOP Mfr No. L11SEC1.5 L12SEC2.0 LD18SEC2.0 STRETCHSTOP
Description Lanyard single elasticated with SNH Lanyard single elasticated with SNH/SCH Lanyard twin elasticated with SNH/SCH Lanyard single with SNH
Length m 1.5 2.0 2.0 2.0
Part No. 0406 4843 0580 0441 0580 0458 0340 2472
FALL PROTECTION
FALL PROTECTION Harnesses & Lanyards
02
HOOK LEGEND To assist with determining the type of hook/s provided on lanyards and fall arrest devices, please refer to the legend below. SNH SCH TAK
Snap Hook Scaffold Hook Triple Action Karabiner
Mfr No. M1010004 M1010005 M1010006
Description Lanyard single adjustable with SNH Lanyard single adjustable with SNH/SCH Lanyard single adjustable with 4!+
Length m 2.0 2.0 2.0
Part No. 0640 4434 0640 4451 0640 4468
To order, call 132 832 or log on to www.protectoralsafe.com.au
02-23
02
FALL PROTECTION Harnesses & Lanyards
Webbing Lanyards
Adjustable Kernmantle Rope Lanyard
s35mm Polyester webbing sIntegral compact energy absorber smoothly expands for greater shock absorption s19mm Double acting hooks at each end sAvailable in twin tail version Applications sAny work at height application, Elevated Work Platforms (EWP), scaffolding, tower work, climbing, construction, maintenance, work positioning and restraint applications Specifications sApproved to AS/NZS 1891.1:2007
sManufactured from robust 11mm kernmantle rope for greater abrasion resistance sAllows user to minimise fall risks by adjusting the lanyard to suit job sMaximum length of adjustment is 5m sTriple action karabiners (TAK) at each end sIntegrated compact energy absorber smoothly expands for greater shock absorption sEquipped with label containing all relevant information including connection instructions sAlso available in a 2m version Applications sAny work at height application, construction, maintenance, work positioning and restraint applications Specifications sApproved to AS/NZS 1891.1:2007
Lanyard Single
Lanyard Single Adjustable
FALL PROTECTION
Mfr No. L11WEC1.2 L11WEC1.5 L11WEC2.0 LD11WEC2.0
02
Description Lanyard single with SNH Lanyard single with SNH Lanyard single with SNH Lanyard twin adjustable with SNH/TAK
Length m 1.2 1.5 2.0 2.0
Part No. 0617 4815 0580 0407 0339 2782 0519 3371
M1010056 Mfr No. M1010056
Description Lanyard single adjustable with TAK
Length m 5.0
Part No. 0998 6810
Adjustable Webbing Lanyards
Sharp Edge Lanyards
s35mm Polyester webbing sLevitator adjustable lanyards offer unique versatility whilst working at height sPatented design with printed increments every 200mm sEasy to adjust and see working length of lanyard sBrightly coloured webbing increases worker visibility sA choice of lanyard terminations enables greater worker flexibility Applications sAny work at height application, Elevated Work Platforms (EWP), scaffolding, construction, maintenance, work positioning and restraint applications Specifications sApproved to AS/NZS 1891.1:2007
sManufactured from robust 12mm sharp edge rated kernmantle rope sAvailable in various configurations including single, adjustable and twin leg lanyards Applications sAny general work at height sAny application where fall protection equipment may come into contact with a sharp edge Specifications sApproved to AS/NZS 1891.1:2007
Lanyard Single Adjustable Mfr No. L11FEC2.0 L28FEC2.0 LA11FEC2.0 LA28FEC2.0 LD10FEC2.0 LAD10FEC2.0
M1010004 Mfr No. M1010004 M1010005 M1010006
Description Lanyard single adjustable with SNH Lanyard single adjustable with SNH/SCH Lanyard single adjustable with TAK
Length m 2.0 2.0 2.0
Part No. 0640 4434 0640 4451 0640 4468
Description Lanyard single with SNH Lanyard single with TAK Lanyard single adjustable with SNH Lanyard single adjustable with TAK Lanyard twin with TAK Lanyard twin adjustable with SNH/TAK
Lanyard Single Length m 2.0 2.0 2.0 2.0 2.0 2.0
Part No. 0983 3572 0983 3589 0983 3606 0983 3623 0983 3640 0983 3657
PROTECTOR ALSAFE PUBLICATIONS Contact us for a copy of the latest product and services releases from Protector Alsafe… 2010
2011
ACE
SAFETYSpotlight &EJUJPO
CATALOGUE
563/*/(61 5)&)&"50/
4"'&5: 803,8&"3
SEE INSIDE FOR NEW RANGES OF:
High Visibility Polo Shirts Polar Fleece Jacket s Two Tone Parka s High Visibility Pullov ers
4VNNFS8PSLXFBS
5IFMBUFTUJOUIF)BSE:BLLB,PPMHFBSSBOHF +PIO#VMMSFWFBMTUIFJS"DUJWFSBOHF
,FFQJOH:PVS$PPMJOUIF)FBU
Phone 132 832 5JQTPOBWPJEJOHIFBUTUSFTT 1SPEVDUTUPLFFQZPVIZESBUFE
1SPUFDUJPO6OEFSUIF4VO
%POµUCFDPNFBTUBUJTUJD 4MJQ4MPQ4MBQ * Image courtesy of Hard Yakka. Model is wearing Koolgear shirt (style 07790)
02-24
A NEW VISIO
PH: 132 832
N IN FACE & EYE PROTECTION 42319_ACE_W
inter_Catalogu
e_2011_v3.in
Model wears Armadillo
dd 1
www.protect oral
safe.com.au
Complete clear faceshield
www.protectoralsafe.com
.au
or visit us online at www.protectoralsafe.com.au to view and download all our publications
FALL PROTECTION Harnesses & Lanyards/Fall Arrestors Flame Retardant KMAX Lanyards
Talon® Self Retracting Lifelines
sFlame retardant Kevlar® webbing provides protection from heat, and harsh working environments sIntegral compact energy absorber smoothly expands for greater shock absorption s19mm Double acting hooks at each end sAvailable in adjustable and twin tail versions Applications sIdeal for working in heat or with hot sparks Specifications ,!+%# sApproved to AS/NZS 1891.1:2007
sCompact, lightweight design s19mm Nylon webbing sAll metal braking system for durability sQuick-connect handle for direct attachment to anchorage or harness sSelf-locking snap hook with visual impact indicator on webbing si-Safe™ enabled to track inspections and control inventory
Mfr No. L11KEC2.0 LA11KEC2.0 LD11KEC2.0
,$+%#
Description Lanyard single with SNH Lanyard single adjustable with SNH Lanyard twin with SNH
Length m 2.0 2.0 2.0
Part No. 0446 1164 0998 6793 0998 6776
ENABLED
Applications sFor use in place of a lanyard to provide fall protection Specifications sComplies with AS/NZS 1891.3:1997
Mfr No. 3101000 3101020 3101008 3101050
Description SRL with SNH SRL with swivel SNH SRL with stock picker cab mount bracket & SNH SRL with swivel mount and SNH
Length m 2.4 2.4
Part No. 0444 7411 0670 5079
2.4
0670 5113
4.8
0670 5096
Roof Workers Kits
Talon® 100% Tie-Off Self Retracting Lifeline
sCompact kit for easy transportation and storage sKit designed to suit most roofing height situations s+ITINCLUDES 1 x Contractor 2 point harness in M1070004 and 1 x DuraFlex™ STRETCH GUARD harness in M1070007 1 x 15m Anchorage line with type 1 fall arrestor 1 x Webbing tie-off adaptor 1 x Storage bag Applications M1070004 sRoof work, construction and maintenance Specifications sComplies with AS/NZS 1891.1:2007
sCompact, lightweight design sTwin Self Retracting Lifeline (SRL) with 1.8m lifeline that provides mobility whilst staying continuously connected s100% Tie-off capabilities for safe work at heights sInertia activated for quick response time and reduced arresting forces sQuick-connect mount handle for easy harness attachment sExtra-strong and long-lasting materials for extended product life sLarge scaffold hooks for quick and easy anchorage attachments si-Safe™ enabled to track inspections and control inventory Applications s)DEALFORUSEINPLACEOFALANYARDTOPROVIDEFALLPROTECTION Specifications sComplies with AS/NZS 1891.3:1997
Mfr No. Description Length m 3102010 SRL with twin lifelines and SCH 1.8
ENABLED
Part No. 0764 0861
02
M1070007
Mfr No. M1070004 M1070007
Type Contractor roof workers kit DuraFlex™ roof workers kit
Part No. 0616 0841 0640 4536
Miller Relief Step™ Safety Device sDesigned for the temporary prevention of suspension trauma sCompact pack encompassing a webbing strap and foot loop sAttaches easily to any full body harness sAssists in allowing circulation until rescue occurs sPull tab to deploy and adjust length of foot loop s2 x Relief steps are recommended (one for each leg) for added comfort, balance and better circulation in both legs Applications sAny fall arrest application utilising a full body harness Mfr No. 9099X/12
Part No. 0610 6713
FALL PROTECTION
,+%#
02
Ultra-Lok® Webbing Self Retracting Lifeline sStainless steel working components for corrosion resistance sWebbing lifeline for reduced weight sSelf adjusting disc brake for reliability sBuilt in anti-ratcheting capabilities sReserve lifeline retention system for added safety sSelf locking swivel double action snap hook with visual impact indicator sFall indicator on webbing si-Safe™ enabled to track inspection and control inventory sSwivelling anchorage loop to prevent twisting of lifeline Applications sIdeal for use in numerous industries, providing mobility and security with automatic fall arrest mode where workers must move about to handle or install materials Specifications sComplies with AS/NZS 1891.3:1997
Mfr No. 3103207
Description SRL with swivel SNH
Length m 6
ENABLED
Part No. 0436 5046
To order, call 132 832 or log on to www.protectoralsafe.com.au
02-25
02
Ultra-Lok® Cable Self Retracting Lifelines
Rebel™ Cable Self Retracting Lifelines
sStainless steel working components for corrosion resistance s5mm Galvanised cable lifeline for durability sSelf adjusting disc brake for reliability sBuilt-in anti-ratcheting capabilities sAudible indicator ensures the breaking system is functioning properly sReserve lifeline retention system for added safety sSelf locking swivel snap hook with impact indicator sSwivelling anchorage loop to prevent twisting of lifeline si-Safe™ enabled to track inspections and control inventory Applications sIdeal for use in numerous industries, providing mobility and security with automatic fall arrest mode where workers must move about to handle or install materials Specifications sComplies with AS/NZS 1891.3:1997 sComplies with CE EN360:1993
sRetractable technology reduces fall clearance and trip hazards for complete safety sStainless steel or galvanised cable options available sRugged thermoplastic housing can withstand rough use sSelf locking swivel snap hook with impact indicator Applications sSuitable for working at heights – construction and maintenance applications Specifications sComplies with AS/NZS 1891.3:1997
FALL PROTECTION
Mfr No. 3504433 3504430 3504450
02
FALL PROTECTION Fall Arrestors
Description SRL with swivel SNH SRL with swivel SNH SRL with swivel SNH
Length m 6 10 15
ENABLED
Mfr No. 3590521 3590570 3590610 3590690
Part No. 0436 5063 0470 5879 0444 8839
Ultra-Lok™ RSQ Self Retracting Lifeline with Rescue
Description SRL with swivel SNH Rescue tool Rescue tool with pole
Length m 15 – 2.4 - 4.8
Part No. 0982 7792 0982 7996 0982 8013
ENABLED
3500102
02-26
Length m 15 25
Description Cable SRL with swivel SNH Webbing SRL with SNH
Length m 4.5 3.3
Part No. 0982 9747 0601 7174
3506055
3504555
Lad-Saf® Flexible Cable Ladder Safety Systems
sStainless steel and cast aluminium housing for corrosion resistance s5mm Galvanised cable sBuilt in retrieval winch for raising/lowering load during emergencies sEnvironmentally sealed design for safety, even in harsh environments sSelf adjusting disc brake for reliability sReserve lifeline retention system for added safety sSelf-locking swivel snap hook with impact indicator si-Safe™ enabled to track inspections and control inventory Applications sIdeal for use in harsh environments and confined space applications sProvides mobility and security with automatic fall arrest mode and retrieval winch capabilities for raising/lowering personnel in emergency rescue/retrieval situations Specifications sComplies with AS/NZS 1891.3:1997 sComplies with CE EN360:1993 Description Emergency retrieval SRL with swivel SNH Emergency retrieval SRL with swivel SNH
Part No. 0059 9360 0059 9377 0059 9394 0059 9428
sRugged aluminium and steel construction sLightweight and compact design sSwivelling anchorage loop sAvailable with galvanised cable or webbing sGalvanised cable model: swivelling snap hook helps prevent twisting of cable sWebbing cable model: unique super-strength thin webbing Applications sSuitable for working at heights, construction and maintenance sCable version – designed for rugged applications and hot work Specifications sComplies with AS/NZS 1891.3:1997
Mfr No. 3506055 AD111ARA
Emergency Retrieval Sealed Self Retracting Lifelines
Mfr No. 3400101 3400301
Length m 10 15 20 30
Compact Rebel™ Self Retracting Lifelines
sMultiple built-in rescue operations for superior safety sDual-mode operation sFall arrest mode (assisted rescue) sAutomatic rescue mode (self rescue/descent) si-Safe™ enabled to track inspections and control inventory 3500100 – Assisted Rescue Tool sAccessory to be used with First-Man-Up™ pole 3500102 – First-Man-Up™ Pole with Assisted Rescue Tool sAccessory to be used with Ultra-Lok™ RSQ Self Retracting Lifeline (SRL) Applications sTelecommunications, warehousing and construction sIdeal for use in numerous industries, providing mobility and security with automatic fall arrest mode where workers must move about to handle or install materials Specifications sComplies with AS/NZS 1891.3:1997 3500100 sComplies with CE EN360:1993 Mfr No. 3504555 3500100 3500102
Description SRL galvanised wire with swivel SNH SRL galvanised wire with swivel SNH SRL galvanised wire with swivel SNH SRL galvanised wire with swivel SNH
Part No. 0470 5828 0444 8703
ENABLED
sEnsure safety and security when climbing fixed ladders on poles, towers and tanks sShock absorbing top bracket and tension indicating bottom bracket serve as the anchors for the steel cable which runs the length of the climbing area sNon-metallic cable guides reduce cable wear, permitting you to ascend or descend unhindered sAvailable for straight or curved ladders and for connection to wood, concrete or steel structures Applications sIdeal for ascending and descending from all vertical applications including permanent ladders, power poles, electrical towers and chimneys Specifications sComplies with AS/NZS 1891.3:1997 Mfr No. LS-B LS-W 6116540
Description Galvanised bolt on system Galvanised weld on system Sleeve with karabiner
Part No. 0436 9211 0535 0111 0059 9326
Systems include top and bottom brackets only – they DO NOT include any cable, cable guides, sleeves, harnesses or connectors, these items must be ordered separately. Contact your Protector Alsafe sales representative or customer service centre for full specifications and a quotation
FALL PROTECTION Fall Arrestors
sRetractable lifeline is simply pulled out for installation and retracted with the built in winch for dismantling sCustomise your system length in any increment up to 18m sEntire system stores in an easy to carry case – no more coils of unmanageable cable sBuilt in pre-tension and impact indicators take the guess work out of set-up and inspection sProvides hands free horizontal mobility and continuous protection for 2 users per span, up to 6 users per system Applications sEasy to use retractable lifeline ideal for temporary applications such as maintenance, painting or billboard work Specifications sComplies with AS/NZS 1891.2:2001 sComplies with AS/NZS 1891.4:2009
Mfr No. 7605061
Length m 18
Part No. 0709 8459
Sayfline™ Temporary Horizontal Lifeline Kits sSuitable for multi-person use (rated for two persons) sLightweight and portable, allowing you to move and reuse the system s+ITINCLUDES 1 x Rope lifeline assembly and tensioning device 2 x Anchor straps 2 X Attachment runner pulleys 1 x Storage bag Applications sIdeal for temporary applications such as maintenance, painting or billboard work where the system will be left in place for minutes or several days Specifications sComplies with AS/NZS 1891.2:2001 Mfr No. P-2000-15 P-2000-20 P-2000-25 P-2000-30
Length m 15 20 25 30
Part No. 0444 9026 0444 9043 0439 7550 0439 7567
Protecta Green Rope Grab/Lifeline
Anchor Straps
s11mm Kernmantle rope lifeline sRope adjuster with integral shock absorbing lanyard sKarabiners sSewn eye and end stop Applications sDesigned to provide continuous fall protection on rope lifeline systems Specifications sComplies with AS/NZS 1891.3:1997
sLightweight, high strength rated to 22.2kN for personal use sExtra heavy duty – wide integral wear pad provides abrasion resistance and extends product life sTie-off adaptor anchor straps with interlocking rings sCoated steel hardware for corrosion resistance and strength sAnti roll-out design si-Safe™ enabled to track inspections and control inventory Applications sUse as anchorage connector for fall arrest, restraint, work positioning, suspension or rescue systems Specifications sComplies with AS/NZS 1891.4:2009 requirements for fall arrest rated anchorage
Mfr No. AC215MBAUPS
Length m 15
Part No. 0819 0505
Mfr No. E849-005 E849-008 E849-010 E849-012 E849-015 E849-020
Length m 0.5 0.8 1.0 1.2 1.5 2.0
Part No. 0426 9217 0426 9234 0444 8227 0426 9251 0444 8244 0444 8261
Kernmantle Rope Grab System
Protecta Green Anchor Strap
s11mm Kernmantle rope lifeline sDouble action snap hook sBacksplice sRope adjuster sSewn eye splice and thimble sSewn end stop Applications sIdeal for fall arrest situations where the user is required to perform horizontal or angle type work Specifications sComplies with AS/NZS 1891.3:1997
sProvides a portable fall arrest rated anchorage device that can be used almost anywhere sDurable, lightweight, portable and easy to install sHigh strength rated to 22kN for personal use Applications sUse as anchorage connector for fall arrest, restraint, work positioning, suspension or rescue systems Specifications sComplies with AS/NZS 1891.4:2009 requirements for fall arrest rated anchorage
Mfr No. P6711-015-36-58 P6711-020-36-58 P6711-025-36-58 P6711-030-36-58 P6711-040-36-58
Length m 15 20 25 30 40
Part No. 0777 1370 0777 1387 0777 1404 0777 1421 0777 1438
Mfr No. AM450PS
Length m 1.5
ENABLED
FALL PROTECTION
EZ-Line™ Retractable Horizontal Lifeline
02
02
Part No. 0819 0437
To order, call 132 832 or log on to www.protectoralsafe.com.au
02-27
02
Anchor On the Go™ Temporary Roof Anchor
Door/Window Jamb Anchor
sHeavy duty 15kN fall arrest rated anchor point sRe-positionable locking cams for a perfect fit on a variety of sheet roofing sRubber end cap sInstruction label with room to record inspection dates sEasy to use, economical, temporary roof anchor for metal roof applications Applications sAnchorage point for fall protection during all aspects of roof access and maintenance in both residential and commercial applications Specifications sComplies with AS/NZS 1891.4:2009 requirements for fall arrest rated anchorage
sRated to 16kN when installed as per manufacturer instructions sNon-penetrating design ensures no damage to structure sFits door or window sizes ranging from 546 to 1308mm in width sFast and easy installation – no tools or drilling required sPortable and lightweight (weighs 6.35kg) sEasy to transport, store and use Applications sResidential and commercial construction, roof tops with door entrances, elevator shafts, wall openings, emergency and rescue Specifications sComplies with AS/NZS 1891.4:2009 requirements for fall arrest rated anchorage
FALL PROTECTION
Mfr No. 762998
02
FALL PROTECTION Fall Arrestors
Part No. 0982 7758
Part No. 0709 8493
Temporary Anchor
Saflok® Concrete Wedge Anchor
sRated to 15kN for personal use sEasy, one hand operation sVersatile and fits a variety of anchorage points s140mm opening sLightweight, stainless steel – corrosion resistant Applications sDesigned to be used as an anchorage connector to connect personal protective equipment to a structure located above the user Specifications sComplies with AS/NZS 1891.4:2009 requirements for fall arrest rated anchorage
s22kN fall arrest rated anchor point sPortable and reusable, can be removed and simply re-installed in a new location sSwivelling forged steel ring for compatible and safe connections sEasy grip trigger for fast and easy operation sCorrosion resistant stainless steel and aluminium construction Applications sIdeal for vertical or overhead concrete applications Specifications sComplies with AS/NZS 1891.4:2009 requirements for fall arrest rated anchorage
Mfr No. AJ303
Part No. 0640 5131
Glyder™ 2 Sliding Beam Anchor sEasy to adjust fall protection anchor for connection to I-beams that follows the worker as they walk along the beam sFits I-beams from 8.75 to 35cm wide, up to 3.125cm thick sIntegrated ratcheting adjustment system provides quick and easy installation and removal sUnique guarded locking mechanism protects the anchor from accidental disengagement sReplaceable synthetic wear pads eliminate metal-to-metal contact, reducing friction sExtremely lightweight at 1.66kg with a user capacity of 189kg Applications sOverhead or at your feet anchorage point to I-beams for fall protection in commercial applications Specifications sComplies with AS/NZS 1891.4:2009 requirements for fall arrest rated anchorage
Mfr No. 2104700
02-28
Mfr No. 2100080
Part No. 0709 8476
Mfr No. 2100085
Part No. 0982 7775
Mobi-Lok™ Self Contained Vacuum Anchor System sUse as single person anchor point or as a two person horizontal lifeline end anchor (primary and secondary pad assembly) sWithstands the forces generated in stopping a falling person sNon-penetrating anchor requires no drilling, welding or alteration to surface sLightweight, compact anchor is easy to carry, attaches to surface Applications sProvides a non-penetrating anchor point for fall arrest or restraint systems for attachment to smooth, non-porous surfaces such as aircraft, railway cars and tanks Specifications sComplies with AS/NZS 1891.4:2009 requirements for fall arrest rated anchorage
Mfr No. 22000095
Part No. 0776 4757
02
Miller TurboLite™ Fall Arrestor
Miller MightyLite™ Fall Arrestor
sRetractable technology prevents trip hazards while built in swivel also prevents lifeline twisting sExtremely compact and lightweight sProvides 2m working capacity lifeline which attaches directly to the harness back D-ring for greater mobility and versatility sCan also be used in horizontal and foot level applications where an overhead anchorage point is unavailable sHigh strength, impact resistant nylon housing and engineered HiTech polyester/Vectran webbing provide more resistance to abrasion, increasing durability sEliminates the need for different fall protection equipment to address fall clearance and reduces risk as workers will always be using the proper equipment when fall clearance changes MFLB Twin TurboLite™ D-ring Connector Bracket sTransforms two TurboLite PFLs into a complete tie-off fall protection system sProvides a lightweight, easy-to-use solution for continuous 100% tie-off when working at low fall clearances sInnovative design that easily connects to the back D-ring of any fall protection harness sIncreases worker productivity and versatility with freedom of movement sPermits TurboLite™ fall arrestor to swivel in multiple directions for greater mobility; the swivel action prevents webbing from twisting and binding inside of the unit sWebbing smoothly extends and retracts without interruption sCan be retrofitted to any Miller TurboLite™ model Applications sConstruction, utilities, warehousing and mining Specifications sConforms to standard EN360:2006, accepted under clause 1.6 of AS/NZS 1891.3:1997
sIdeal for hard-to-mount locations – easy to carry and install sHeavy duty performance from a compact and easy-to-use block sDual swivels (unit top and snap hook) included on all models to minimise lifeline from twisting during use sIntegral fall indication hooks sAlso available with webbing in 20m and 40m versions on request Applications sBuilding, construction and maintenance Specifications sComplies with AS/NZS 1891.3:1997 as a Type 2 fall arrest device
Mfr No. MFL-1/2M-AUS MFL-2/2M-AUS MFL-3/2M-AUS MFL-12/2M-AUS 1017900 MFLB
Description Fall arrestor with steel twistlock karabiner & SNH Fall arrestor with steel twistlock karabiner & SCH Fall arrestor with no top attachment & SNH Fall arrestor with aluminium twistlock karabiner & SCH Fall arrestor with twistlock karabiner & aluminium SNH Twin turbolite D-ring connector bracket
Length m 2.0 2.0 2.0 2.0 2.0 –
Mfr No. RL6MG RL10MG RL15MG RL20MG RL30MG RL40MG RL6MP
Description Fall arrestor 4.8mm galvanised with swivel top & swivel SNH Fall arrestor 4.8mm galvanised with swivel top & swivel SNH Fall arrestor 4.8mm galvanised with swivel top & swivel SNH Fall arrestor 4.8mm galvanised with swivel top & swivel SNH Fall arrestor 4.8mm galvanised with swivel top & swivel SNH Fall arrestor 4.8mm galvanised with swivel top & swivel SNH Fall arrestor webbing & swivel SNH
Length m 6 10 15 20 30 40 6
Part No. 0509 1881 0529 4283 0529 4317 0580 1223 0529 4351 0580 1291 0509 1898
Miller Black Rhino™ Fall Arrestor
Part No. 0794 2968 0794 2985 0794 3002 0794 3019 0794 3036 0998 6640
sQuick activating high strength stainless steel braking system sIntegral load indicator shows if a fall has been taken sIntegral internal shock absorber limits fall forces to under 4kN sCorrosion resistant stainless steel and aluminium components Applications sHarsh environments such as concrete construction, welding, steel erection, food processing and warehousing Specifications sComplies with AS/NZS 1891.3:1997 as a Type 2 fall arrest device
Miller Falcon™ Fall Arrestor Mfr No. Description with swivel CFL2.7M-7/AUS Fall arrestor SNH
sWithstands the harsh rigours of the toughest applications sUnique side pay out design reduces entry guide and cable wear sNo annual factory re-certification lowers costs and downtime sLoad indicating hook identifies unit removal from service sLightweight smooth composite housing increases durability sDual swivels (top of unit and snap hook end) maximise lifeline from twisting during use sGalvanised wire, webbing or fully stainless steel unit options Applications sConstruction, maintenance, Elevated Work Platforms (EWP), warehousing, steel erection and concrete construction Specifications sComplies with AS/NZS 1891.3:1997 as a Type 2 fall arrest device
Mfr No. 1011728 1011742 1011746 1011750 M1030041 M1030040 M1030039 M1030038
Description Fall arrestor galvanised wire with swivel top & swivel SNH Fall arrestor galvanised wire with swivel top & swivel SNH Fall arrestor galvanised wire with swivel top & swivel SNH Fall arrestor galvanised wire with swivel top & swivel SNH Fall arrestor stainless steel wire with swivel TAK Fall arrestor stainless steel wire with swivel TAK Fall arrestor stainless steel wire with swivel TAK Fall arrestor stainless steel wire with swivel TAK
CFL2.7M-8/AUS
Fall arrestor with TAK
Length m
Part No.
2.7
0654 9495
2.7
0654 9512
FALL PROTECTION
FALL PROTECTION Fall Arrestors
02
Miller Scorpion™ Fall Arrestor
Length m 6.0 10 15 20 6.0 10 15 20
Part No. 0648 9689 0648 9706 0648 9723 0648 9740 0794 2866 0794 2849 0794 2832 0794 2815
sVisual load indicating hook shows when unit has taken a fall sQuick-activating, high-strength stainless steel braking system – limiting free fall to a minimum sCorrosion resistant internal components, stainless steel/aluminium body encased in a high impact polymer cover sNo annual factory re-certification lowers costs and downtime sScorpion™ sharp edge fall arrestor model: includes 25mm polyamide webbing which is sharp edge rated Applications sAny general work at height, Elevated Work Platforms (EWP), scaffolding, construction and maintenance Specifications sComplies with AS/NZS 1891.3:1997 as a Type 2 fall arrest device Mfr No. 1008587
Description Length m Fall arrestor with swivel SNH 2.7 Fall arrestor sharp edge with 1016840 2.6 steel screwgate & swivel SNH Fall arrestor sharp edge with 1016841 aluminium 2.7 screwgate & swivel SNH
Part No. 0595 6688 0983 3674 0983 3691
To order, call 132 832 or log on to www.protectoralsafe.com.au
02-29
02
Miller MiniLite™ Fall Arrestor
Miller Fix Anchor
sQuick activating braking system that limits a free fall to millimetres sCompact, lightweight design to fit into the palm of your hand sIntegral energy absorber sHigh impact protective outer cover sVisual load indicator notifies the user that unit has been involved in a fall sCorrosion resistant interior Applications sConstruction, maintenance, Elevated Work Platforms (EWP) and warehousing Specifications sComplies with AS/NZS 1891.3:1997 as a Type 2 fall arrest device
sCan be used as a fall arrest anchor point for 1 person sEasy to install sCan be used as an end anchor point for a Miller Techline™ (HLLR2/30FT and HLLR2/60FT), temporary horizontal lifeline assembly sFor Xenon and other lines it can be used as a support of intermediates (such as the Xenon 1010609) sEach unit is fitted with a weather seal and is supplied with mounting rivets Applications sConstruction, building, roof maintenance and any roof work application Specifications sIf installed as per manufacturers instructions this unit complies with AS/NZS 1891.4:2009 requirements for fall arrest rated anchorage
Mfr No. FL3M M1030037
FALL PROTECTION
FALL PROTECTION Fall Arrestors
Description Fall arrestor with swivel SNH Fall arrestor with stainless steel swivel load indicating TAK
Length m 3.0
Part No. 0339 2765
3.0
0780 1919
FL3M
Mfr No. M1030055
Part No. 0992 0901
Miller Techline™ Temporary Static Line Kit
Manulink™ Anchorage
sLow stretch rope lifeline for better performance and less deflection sFluorescent green lifeline for high visibility sAccommodates 2 workers sCross arm anchor straps for easy installation sConnecting ‘O’ rings for greater mobility sShock absorber pack reduces fall arrest forces sRope lifeline adjuster to accommodate required length sWaterproof bucket for easy storage Applications sRoofing, maintenance work, rigging and scaffolding work Specifications sMeets applicable OSHA, ANSI and CSA requirements
sUsed to hook personal protective equipment to a structure sSuitable for one person anchorage 15kN sTong opening style sMedium size to suit a structure up to 75mm diameter sLarge size to suit a structure up to 100mm diameter Applications sConstruction, maintenance and most work at height applications with a suitable anchorage section to suit Specifications sComplies with AS/NZS 1891.4:2009 requirements for fall arrest rated anchorage
Mfr No. HLLR2/30FT HLLR2/60FT
Length 30ft/9.1m 60ft/18.2m
Part No. 0992 0952 0992 0986
Mfr No. 82-302 82-303
02
Diameter mm 75 100
Size M L
Part No. 0135 5621 0340 2625
Temporary Static Line Kits Webbing Tie-Off Adaptors
sFor situations where accessibility along a length of an area is required on a temporary basis s2 Person horizontal line system s2OPEKITINCLUDES1 x 20m Three strand Hawserlaid nylon rope, 1 x Harip tensioning device, 2 x 566 Karabiners, 3 x 501 Karabiners, 2 x Split running blocks, 3 x Webbing tie-off adaptors, 1 x Storage bag s7EBBINGKITINCLUDES 1 x 20m Webbing line with ratchet tensioner, 1 x Storage bag Applications sConstruction, maintenance and roof work applications Specifications sApproved to EN795B:2002
Mfr No. SR01 3501418
02-30
Description Static line temporary 20m rope kit Static line temporary 20m webbing kit
sWraps around an anchorage point providing a suitable connection sAllows attachment to anchorage point sSingle person anchorage point Applications sConstruction, maintenance, roofing and most work at height applications Specifications sComplies with AS/NZS 1891.4:2009 requirements for fall arrest rated anchorage SR01
Part No. 0321 4027 0595 6705
3501418
Mfr No. WT01M WT02M
Length m 1.0 2.0
Part No. 0535 0842 0780 1987
FALL PROTECTION Fall Arrestors
02
DBI-SALA Engineered Solutions
Ladder Grips sCan be used as a fall arrest anchor point for one person sEasy to install sComplete with a handle to hold on to when getting on to and off the roof sEach unit is fitted with a weather seal and is supplied with mounting rivets sThe ladder bracket can be mounted on a single ridge or across multiple ridges sLow profile design for minimal visual intrusion Applications sBuilding contractors and any roof work application Specifications sComplies with AS/NZS 1891.4:2009 requirements for fall arrest rated anchorage
Part No. 0992 0918
Roof Anchor sRight angled anchor plate clamps securely onto a roof edge sCurved arm suited to corrugated roofs sScrews down for additional stability sSingle person anchorage point Applications sSingle person anchorage tee for adapting to roof edges Specifications sComplies with AS/NZS 1891.4:2009
MOBILE FALL PROTECTION Mfr No. M1030048
Part No. 0307 4661
FALL PROTECTION
Mfr No. M1030061
02
Screwgate Karabiner sKarabiners act as a connection point between harness and ancillary fall arrestor, or between fall arrestor and anchorage point sConvenient and lightweight, offering the worker flexibility sAlloy steel construction Applications sAll work at height applications Specifications sComplies with AS/NZS 1891.4:2009
Mobile Fall Protection Systems provide the user with an overhead anchorage point that can be moved around from application to application. Ideal for situations where an overhead structure is unreachable or does not exist. These systems are robustly built and are typically rated for up to at least two users. Adjustable in height, they provide an active fall protection solution for a wide range of applications. For more information on this product please contact your Protector Alsafe representative or customer service centre.
501 Mfr No. 501 566
Description Screwgate strength 22kN Screwgate strength 50kN
566
Part No. 0102 9657 0340 2574
To order, call 132 832 or log on to www.protectoralsafe.com.au
02-31
02
FALL PROTECTION Confined Space & Retrieval
Tripods
Spreader Bar
sFall arrest rated for 2 workers sLightweight and portable, requires only one person to set up sAdjustable locking legs for added versatility and safety sComplete with safety chain to prevent movement and safety feet that incorporate a rubber sole for flat surfaces and spiked edges for slippery surfaces sDurable corrosion resistant aluminium and heat treated cast aluminium construction Applications sIdeal for working in confined spaces and rescue applications and is designed for manhole and confined space entry/retrieval applications Specifications sComplies with AS/NZS1891.4:2007 requirements for fall arrest rated anchorages
sConstructed from heavy duty webbing sComplete with double action karabiners for easy connection to harness sAdjustable rescue wrist straps allows user to raise the arms and reduce body shoulder width Applications sUsed with a confined space harness keeps the user in an upright position allowing easier entry/exit from manholes and confined spaces Specifications sApproved to AS/NZS 1891.1:2007
Mfr No. 8000000 8000010
Height m 2.13 2.74
Part No. 0444 8618 0470 5777
FALL PROTECTION 02
sEasy operation, gear ratio is 6:1 with an average lifting speed of 3.9m/min sQuick-mount system; complete with unique quick-mount bracket making attachment to DBI-SALA support structures (tripod, davit arm etc.) sHousing constructed from durable medium density polyethylene (reduces weight and will not dent or corrode like metal) with a built-in ergonomic carrying handle sSelf locking swivel double action snap hook with visual impact indicator sSupplied with mounting bracket and storage bag sGalvanised cable sAlso available with stainless steel cable on request Applications sIdeal for raising, lowering or supporting personnel and is designed specifically for confined space entry/retrieval applications Specifications sComplies with OSHA, ANSI Z359.1:1991 and ANSI A10.14:1991
Length m 18.2 27.0 36.0
Diameter mm 6 5 5
Part No. 0436 5114 0481 6107 0777 1608
Advanced Digital Winch sUnique ‘digital usage indicator’ system that counts the revolutions of the drum to determine service intervals sRated for a maximum working load of 204kg with an 11:1 safety factor s2 Cranking speeds capable of retrieval/descent at average speeds from 4m/min up to 9m/min sAll cable assemblies come with a double locking swivel snap hook with overload indicator sBraking system has 3 independent working pawls sCentrifugal back-up brake sRemovable handle sCarrying handle and cable retainer spring s5mm Galvanised cable sAlso available with stainless steel cable or Technora rope on request Applications sIdeal for raising, lowering or supporting personnel and is designed specifically for confined space entry/retrieval applications Mfr No. 8518560 8518561 8518582
02-32
Length m 18 27 58
Part No. 0777 1506 0777 1523 0777 1540
Part No. 0444 7717
Advanced 5-Piece Hoist System
Salalift® II Winch
Mfr No. 8102001 8102009 8102005
Mfr No. E522-SB1
sConstructed of lightweight materials including high strength aluminium sDavit pivots for ease of rescue sAdjustable arm and lower base s3YSTEM)NCLUDES 1 x Adjustable offset mast (8518001) 1 x Lightweight lower mast (8518002) 1 x 3 Piece lightweight base (8518005) s3YSTEM)NCLUDES 1 x Adjustable offset mast (8518006) 1 x Lightweight lower mast (8518002) 1 x 3 Piece lightweight base (8518008) Applications sDesigned for manhole and confined space entry/retrieval applications Specifications sComplies with AS/NZS 1891.4:2009 Mfr No. 8518000 8518040
Description Standard base hoist system with adjustable mast (305mm to 737mm) Large base hoist system with adjustable mast (762mm to 1080mm)
Part No. 0059 9343 0777 1489
Mechanical devices and attachments sold separately. For more information on this product please contact your Protector Alsafe representative or customer service centre
Advanced Personal Fall Arrest System (PFAS) sCompact and lightweight (17kg) for easy transport and set up sProvides fall arrest anchor points with 360° rotation for up to 3 workers sOptional rescue davit arm easily attaches for material handling/rescue applications Applications sDesigned for use on top of transformers or other types of vertical platforms with potential fall hazards Specifications sComplies with AS/NZS 1891.4:2009
Mfr No. 8516691 8516693
Description PFAS Post Rescue Davit arm
Part No. 0777 1455 0777 1472
Mechanical devices and attachments sold separately. For more information on this product please contact your Protector Alsafe representative or customer service centre
FALL PROTECTION Confined Space & Retrieval
02
Tripods
Davit Base and Arm
sAnchorage connector for typical confined space and rescue systems sLightweight, high-strength aluminium construction sWithstands up to 22kN of vertical pull sAdjustable legs with integral push pins, ideal for uneven surfaces sIndependent leg locking feature holds legs securely in place sSafety chain and tripod feet with rubber skid pads and serrated edge prevent slippage in icy conditions Applications sRescue and confined space Specifications sComplies with AS/NZS 1891.4:2009
sProvides a fixed anchorage point for work winches or rescue systems sDavit arm swivels and can be removed from the base sMAN/WINA adapting plate required when mounting the Manhandler™ winch to the davit arm Applications sConfined space, industrial access and rescue Specifications sComplies with AS/NZS 1891.4:2009 to single person fall arrest 15kN sIn accordance with EN795:1996
Height m 2.26 2.92
Mfr No. DL 120B DL 120D
Part No. 0340 2642 0340 2659
Miller MightEvac™ Fall Arrestor sPromotes quick and easy rescue with a 4:1 mechanical advantage (average speed of 7.6m per minute) sNot to be used for positioning work s1.4kN Weight capacity sCorrosion resistant stainless steel and aluminium components sConvenient, heavy duty carrying handle Applications sRescue, emergency retrieval and confined space Specifications sComplies with AS/NZS 1891.3:1997 as a Type 2 fall arrest device
Mfr No. MR15MG MR15MGB MR30MGB M1030036 M1030035
Description Fall arrestor Fall arrestor with tripod bracket Fall arrestor with tripod bracket Inertia reel Inertia reel
Length m 15 15 30 15 30
Part No. 0529 4368 0580 1308 0548 5414 0780 1817 0780 1834
Description Davit base Davit Arm to suit Davit base
Part No. 0580 1393 0580 1410
FALL PROTECTION
Mfr No. TR1/7 TR1/9
Miller DuraHoist™ Confined Space System sLightweight, easy storage, transport and set-up sDH-3 mast has 22kN capacity fall arrest anchor point sHeight of mast can be adjusted sDH-4 has built-in level indicator for easy levelling sQuick release joins for easy collapse and transport sThree piece base features adjustable screws for easy set-up Applications sDesigned for manhole and confined space entry/retrieval applications Specifications s In accordance EN795:2002 sMeets requirements set forth in OSHA 1910.66, OSHA 1926.502(d), ANSI A10.32 and ANSI Z359.1
Mfr No. DH-3 DH-4
Description One piece adjustable mast Three piece portable base
Part No. 0770 7926 0770 7943
DH-4
DH-3
02
Miller ManHandler™ Winch sCompact durable steel construction with 159kg maximum working load sSmooth controlled winding action sEffortless lifting and lowering with a 5:1 gear ratio sAnti-backlash crank handle braking system prevents freewheeling sBuilt in mounting bracket for addition to the Miller tripod Applications sConfined space entry, rescue and emergency retrieval Specifications sComplies with EN1496:2007
Mfr No. MAN/WIN MAN/WIN 30MT MAN/WINA
Description ManHandler winch ManHandler winch ManHandler winch adaptor
Length m 18 30 –
Part No. 0340 2693 0770 7960 0580 1376
Image courtesy of Miller by Honeywell
To order, call 132 832 or log on to www.protectoralsafe.com.au
02-33
02
FALL PROTECTION Descent & Rescue
Rescumatic® Automatic Descent Control Device sSafely lowers the endangered person at a controlled rate of approximately 1 metre per second sDescent speed automatically adjusts to the user’s body weight sSteel cable construction for durability and corrosion resistance with an outer braided fabric sheath sEasy to operate, no special tools, skills or power source required sComplete with two webbing support straps (one at each end of cable) sNote: Rescumatic® length is a determined cable length which must be ordered separately Applications sIdeal for controlled descent from overhead cranes, towers, buildings or other working at height situations Specifications sComplies with CE 0086, EN 341 Class B
FALL PROTECTION
Mfr No. 3300000
02
Rollgliss® R250 Rescue Kit sSafe, reliable and cost effective packaged rescue solution for use in industrial rescue sEasy to operate, no specialist tools, rescue skills or power source required sFast efficient rescue – on average a rescue takes less than 10 minutes sLarge hook design is easier to connect the rescue device to the suspended person s+ITINCLUDES 1 x R250 descender with karabiner 1 x Rope and safety hook 1 x Extension pole 1 x Mini-haul system anchorage strap 2 x Carry bags Applications sDesigned for rescue of a worker left suspended at height after a fall Specifications sComplies with ANSI Z117.1, EN341:1993 and EN1496:2006 Mfr No. AG62501010 AG62501020 AG62501030
Part No. 0777 1625
Length m 10 20 30
Part No. 0709 8629 0709 8646 0709 8663
Miller SafEscape™ Elite
Huntsman Rescue Kit
sThe position and design of the hand wheel reduces swaying during lifting, facilitating evacuation procedures sDescent is quick 1 metre per second and smooth thanks to a centrifugal brake, which controls the decent and reduces vibration sDecent loads possible from 30kg to 250kg (2 people) sSpecific lengths of rope can be manufactured on request Applications sWind energy, high voltage masts, cranes and any areas normally inaccessible by conventional means Specifications sComplies with EN341:2008, EN1496:2007, ISO 22159 and ANSI Z359.4.2007
2ESCUE+IT sFeatures a block and tackle design with a ratio of 4:1 or 5:1 (depending on which direction the load is being pulled) making recovery easier s+ITINCLUDES 1 x 8mm Kernmantle rope (length varies depending on the kit) 1 x Telescopic pole 3 x 91326 Triple acting karabiners 2 x Webbing tie-offs 1 x 2m Rapid action backpack Telescopic Pole sDesigned specifically to operate with double and triple locking karabiners for remote clipping of load bearing attachment points (most commonly harness D rings and eye bolts) sCompresses to 0.83m/extends to 3.66m sCan be used in vertical upwards and downwards, 2ESCUE+IT and horizontal clipping access planes Applications sRescue operations
Mfr No. 1029150 1029152 1029156 1028750 1028752 1028756
Description With hoist and handle With hoist and handle With hoist and handle Without hoist Without hoist Without hoist
Size 20m 40m 80m 20m 40m 80m
Part No. 0998 6674 0998 6691 0998 6708 0998 6725 0998 6742 0998 6759
Telescopic Pole
Mfr No. M1030049 M1030050 M1030051 M1030052 M1030053 M1030064
Description Huntsman rescue kit Huntsman rescue kit Huntsman rescue kit Huntsman rescue kit Huntsman rescue kit Telescopic pole
Length m 20 30 40 50 60 0.83-3.66
Part No. 0998 6555 0998 6572 0998 6589 0998 6606 0998 6623 0998 6657
Escape Master sHighly visible low density polyethylene deployment container sQuick release pin on box lid for easy set up sDescent can be easily controlled by the user or the person on the ground s11mm Kernmantle static rope sVery high impact resistance box will not shatter allowing reuse Applications sInstalled onto Elevated Work Platforms (EWP) for emergency escape Specifications sComplies with AS/NZS 1891.4:2009
Mfr No. M1030018 M1030017 M1030016 M1030015
02-34
Description Escape master with 15m of rope Escape master with 20m of rope Escape master with 25m of rope Escape master box only
Part No. 0602 2665 0602 2648 0509 1201 0602 2614
Rescue Master Kits sRaise and lower pulleys with a 3:1 ratio s11mm Kernmantle static rope s2- -4 ,+ITINCLUDES 1 x 45m Kernmantle rope, 1 x Raise and lower pulleys, 2 x 501 Karabiners, 1 x Webbing tie-off adaptor, 1 x Storage bag s2- -4+ITINCLUDES 1 x 45m Kernmantle rope, 1 x Raise and lower pulleys, 2 x 501 Karabiners, 1 x Webbing tie-off adaptor, 1 x 201EPG Body belt with rope grip, 1 x 560 Rescue chest harness, 1 x Storage bag Applications sComprehensive kit specifically designed for assisting in rescue from difficult to access areas Specifications sIn accordance with EN1496:1996 Mfr No. RM-45M-L RM-45MT
Description Light kit Complete kit
Part No. 0138 7972 0092 0655
RM-45MT
Prusik Minding Pulley
Vertical Rescue Stretcher Kit
s36kN Load rating sInnovative design combines a side opening plate with a unique stainless steel gate allowing access to the sheave without having to disconnect the pulley from the anchor or karabiner sEfficient to use when time is of the essence sAccommodates up to 3 x 12mm karabiners at connection point sFast transition from lowering to hauling and vice versa sMade from high grade anodized aluminium and stainless steel sSheave size: 65mm x 13mm sPulley size: W120mm x D47mm – weight 950g sRope sizing: up to 13mm Applications sHeavy duty industrial rigging and hauling systems and rescue operations Specifications sTested in accordance with NFPA 1983:2006
sHorizontal and vertical lifting operations sStretcher rolls up and stored in Cordura storage bag (included) with back pack shoulder straps sStretcher becomes rigid when deployed sIncludes comprehensive colour-coded, fully body restraint system sBridle offers additional adjustment of stretcher angle sBridle has adjustable sling arms, each colour coded to stretcher lift handles to ensure correct placement sStretcher constructed from internal high density polyethylene with mix of tough 1000 and 1680 denier cordura with heavy polyurethane coating sLength: 202cm; Width: 77cm; Weight: 8kg sLoad limit horizontal: 350kg Load limit vertical: 250kg s+ITINCLUDES 1x Vertical rescue stretcher (1 x padded head restraint; 6 x Over body restraints; shoulder and groin straps; foot strap plus built-in harness system) 1 x BRB-VRS 6-Point lift bridle
Mfr No. FWE-OG1
Description Prusik Minding Pulley
Part No. 0061 3572
02
Descent Units sFriction control, double stop descending system sSimple, soft moulded operator handle sDouble stop mode sAuto lock sExtensively tested with Donaghys 11mm rescue response static rope and the Donaghys 11mm response XT rope sFWE-FDU 100 with friction plate and FWE-FDU 200 without friction plate Applications sDesigned for personal rescue, emergency escape, tower/wind farm rescue, specialised rope work and rescue operations sSuitable for 2 person rescue Specifications FWE-FDU 100 sComplies with AS/NZS 4488.1:1997 when used with Donaghys 11mm rescue response static rope and Donaghys 11mm response XT rope Mfr No. FWE-FDU 100 FWE-FDU 200
Description Descent unit with friction plate Descent unit without friction plate
Part No. 0061 3674 0061 3691
FWE-FDU 200
Res-Q-Link Recovery Pole sUnique and multi-functional rescue pole sLarge alloy double action hook compatible with most recovery systems sAllows two configurations for versatility when rescuing victim sExtendable from 1.5m to 2.8m sLower fibreglass section and rubber coated handle for maximum grip and control in long reach scenarios sTorch holder compatible with most slim line torches sRope and web cutting knife sAll in one rescue pole with attachments Applications sRescue and recovery
Mfr No. FWE2090
Description Recovery pole
Part No. 0061 3555
Mfr No. V-RES-STRETCH PA
Description Vertical rescue stretcher kit
Part No. 0061 3589
Oxy-Rescue Kit sOffers oxygen on-demand, oxygen therapy plus one extra high pressure outlet sVenturi suction system included for advanced practised suction sTakes ‘C’ size oxygen cylinder (not included in the kit) s+ITINCLUDES 1 x Spiracle multiflow regulator 0.25 to 25L/min 1 x Oxygen demand valve with mask and tubing 1 x Oxygen powered suction kit 3 x Adult and child therapy masks 1 x Colour-coded airways – sizes one to five 1 x Pocket mask with O2 inlet 1 x Face strap and case 1 x Cylinder spanner 1 x FAHAD-5100 airway management bag Applications sFor use in rescue and emergency situations by trained persons where oxygen resuscitation is required Specifications sComplies with AS3841:1998
Mfr No. OXK-RVPA
Description Oxygen rescue kit
FALL PROTECTION
FALL PROTECTION Descent & Rescue
02
Part No. 0061 3453
To order, call 132 832 or log on to www.protectoralsafe.com.au
02-35
TOTAL EDGE MANAGEMENT SYSTEM
The Arachnipod is an innovative design that captures multi-functional capabilities. Simplicity and robust engineering provide the world’s most versatile modular Total Edge Management System (TEMS). Ferno are dedicated to design and innovation and as such recognised the need for one height safety edge management device that could easily adjust into multiple configurations, providing users with a safe, cost effective total edge management system. The new innovative Arachnipod is based around the concept of an industrial tripod however this product is much more than just a tripod. Components can be added or removed as required so that the Arachnipod complements existing structural or natural features.
Tripod The tripod is a self-supporting device providing quick and easy access to confined space entry points such as manholes and voids. This system can also be used as a high directional frame. A unique feature of the Arachnipod is that it at packs’ for convenient storage, yet is quick and easy to set up. The system can be used with either a winch retrieval system or a mechanical advantage system or both.
Tripod as High Directional System This system can also be used as a high directional frame to support remote mechanical advantage hauling systems. Tripod heads should be guyed with the -shackles to remote anchor points for additional stabilisation.
Quadpod System The quadpod allows greater versatility and stability of the system when using around larger entry areas of confined spaces. These include small trenched areas, convex surfaces and larger circular openings where a conventional tripod will not facilitate the application. When setting up the system, a quad plate is to be used for forming the head shape.
Bridge System This is a feature unique to the Arachnipod. The bridge is used for spanning larger openings or voids where a regular tripod, A-frame or quadpod would not be able to, such as trenches, large holes, mines and lift shafts. It comes as a complete item with trolley, trolley guide rope and heads ready to attach two legs on each end. There is also a tie bar on one end for use with an English Reeve system. However, a remote brake mechanical advantage system can also be attached directly to the trolley. Standard lengths are 2 m (6 ft 7 in), 3 m ( ft 10 in) and 4 m (13 ft 1 in). The bridge is available separately. If you have a standard tripod you can upgrade to a bridge system by purchasing a bridge kit, which will include a bridge and an additional standard leg. When a Total Edge Management System (TEMS) is purchased a 2 m bridge and additional leg come standard, however, if you require a longer bridge this should be specified on placement of the order.
02-36
FALL PROTECTION Descent & Rescue
02
APOD-IND Arachnipod Tripod Rescue System
APOD-IND+ BR2 Arachnipod Tripod Rescue System with Bridge System
sBasic, upgradeable two-person rated tripod sThree-stage telescoping alpha-numeric legs sTripod storage: 370mm x 130mm x 1420mm sWeight: 25.8kg/Leg setting: A-1 sWLL (Working Load Limit) head anchor point: 400kg sWLL (Working Load Limit) load anchored to leg: 220kg sMBS (Minimum Breaking Strain): 40kN s+ITINCLUDES 3 x Standard legs, 1 x Foot tether rope and 1 x Transport bag Applications sFor situations where quick and easy access is required to confined space entry points (e.g. manholes and voids) Specifications sComplies with CE 0123:2010 sComplies with EN795B:2010
sThree-stage telescoping alpha-numeric legs sComplete bridge system with trolley, trolley guide rope and heads sBridge (2m) kit: 300mm x 160mm x 2150mm – 35kg sCan also be used in a tripod configuration sCan be used with a remote brake mechanical advantage system for raising and lowering from the bridge trolley sWhen used as a tripod, has a pulley for use with winch or Type 3 fall arrest block sTripod storage: 370mm x 130mm x 1420mm sWeight: 25.8kg/Leg setting: A-1 sWLL (Working Load Limit) head anchor point: 280kg sWLL (Working Load Limit) load anchored to leg: 220kg sMBS (Minimum Breaking Strain): 28kN s+ITINCLUDES3 x Standard legs, 1 x Pulley head leg, 1 x 2m Bridge, 2 x Foot tether ropes and 2 x Transport bags Applications sBridge is used for spanning larger openings or voids where a regular tripod, A-frame or quadpod would not be able to Specifications sComplies with CE 0123:2010 sComplies with EN795B:2010
Description Tripod rescue system
Part No. 0061 3606
APOD-IND+ Arachnipod Tripod Rescue System with Pulley Head sUpgradeable two-person rated tripod with pulley head WLL sThree-stage telescoping alpha-numeric legs sPulley head for winches or Type 3 fall arrest devices sTripod storage: 370mm x 130mm x 1550mm sWeight: 27.2kg/Leg setting: A-1 sWLL (Working Load Limit) head anchor point: 400kg sWLL (Working Load Limit) load anchored to leg: 220kg sMBS (Minimum Breaking Strain): 40kN s+ITINCLUDES 2 x Standard legs, 1 x Pulley head leg, 1 x Foot tether rope and 1 x Transport bag Applications sFor situations where quick and easy access is required to confined space entry points (e.g. manholes and voids) Specifications sComplies with CE 0123:2010 sComplies with EN795B:2010 Mfr No. APOD-IND+
Description Tripod rescue system with pulley
Part No. 0061 3623
APOD-QUAD Arachnipod Quadpod Rescue System sOffers greater versatility and stability than a basic tripod sThree-stage telescoping alpha-numeric legs sWhen used as a tripod, has pulley head for use with winch or Type 3 fall arrest block sUpgradeable accessories include winch, fall arrest Type 3 Retrieval System or rope systems sQuadpod storage: 370mm x 130mm x 1550mm sWeight: 35.8kg/Leg setting: A-1 sWLL (Working Load Limit) head anchor point: 400kg sWLL (Working Load Limit) load anchored to leg: 220kg sMBS (Minimum Breaking Strain): 40kN s+ITINCLUDES3 x Standard legs, 1 x Pulley head leg, 1 x Quad plate, 1 x Foot tether rope, 2 x Transport bags Applications sTrenched areas and surfaces that are convex or concave e.g. fuel tankers sAccess to confined spaces with large circular or square entry points Specifications sComplies with CE 0123:2010 sComplies with EN795B:2010
Mfr No. APOD-QUAD
Description Quadpod rescue system
Part No. 0061 3657
Mfr No. APOD-IND+ BR2
Description Tripod rescue system with bridge
Part No. 0061 3640
Rescue Retrieval Device Kits sDual purpose controlled rate evacuation and descent device sWork height: Up to 160m for 2 persons (200kg) at a time (kits supplied with 50m rope only) sDescent Rate: 0.8m per second s!LLKITSINCLUDE1 x Retrieval device (varies depending on type of kit), 1 x 50m x 11mm Kernmantle rope, 1 x VBS Hi Vis 100 rope bag, 1 x VST A595TBBZO Karabiner, 1 x VSL S30kN 1500 sling, 1 x VSL R32kN 1500 sling, 1 x Res-Q-Link pole 5, -).%6!#0+)4 sSuitable for self-evacuation for one or two persons using hub system sGeared recovery mechanism of 15:1 provides quick retrieval sAscent Rate: 0.2m per second depending on operator competence and fitness 5, ,)&4%6!#+)4 sAbility to raise or lower a worker or casualty sOffers maximum flexibility for all rescue or rope access situations sTelescopic ratchet handles for added leverage sAscent Rate: 0.2m per second depending on operator competence and fitness 5, -).%6!#0+)4 5, ,)&4%6!#$",+)4 sAbility to raise or lower a worker or casualty sOffers maximum flexibility for all rescue or rope access situations sTelescopic ratchet handles for added leverage sIntuitive to use with double ratchet style raise/lower facility sSecond handle provides stability and control during use sAscent Rate: 0.4m per second depending on operator competence and fitness Applications sSelf-rescue evacuation for one to two persons sBest for use from structures such as towers, wind turbines, masts, high bay lift trucks, cranes and confined spaces 5, ,)&4%6!#+)45, ,)&4%6!#$",+)4 sRecover a casualty while rescuer remains in a safe position sRescuer descends to casualty while maintaining control of device 5, ,)&4%6!#+)4 sCan be used by operator as a personal self ascent or descent device 5, ,)&4%6!#$",+)4 sIdeal where ascent off a taller structure is required sWhen faster evacuation from a confined space may be beneficial Specifications sComplies with EN341A:1993 sComplies with EN1496A:1996
Mfr No. UL-MIN EVAC 2P KIT UL-LIFT EVAC KIT UL-LIFT EVAC DBL KIT
Description Rescue retrieval device kit Rescue retrieval device kit Rescue retrieval device kit
Part No. 0061 3538 0061 3504 0061 3521
FALL PROTECTION
Mfr No. APOD-IND
02
5, ,)&4%6!#$",+)4
To order, call 132 832 or log on to www.protectoralsafe.com.au
02-37
02
FALL PROTECTION Specialised Rescue
TNT RESCUE TOOLS
FALL PROTECTION
TNT Rescue Tools are designed with the end user and victim in mind. TNT Rescue tools are designed and engineered in association with in-house fire and EMS personnel and knowledgeable industry professionals, with the range exceeding industry standards.
02
Rescue Cutting Kit
Rescue Ram Kit
s+ITINCLUDES 1 x BFC320 Brute Force cutter and 1 x 9m of hose sMost powerful C-cutter in the industry with 1424kN of cutting force sTrue variable speed control and deadman control increases manageability in critical situations sD-shaped wraparound handle for easy operation in all positions for left and right handed operators sInternal safety bleed valve to prevent over pressurisation within hose couplings sAnodised aluminium body sOptional hand pump operation sRe-grindable blades which extends blade life sSafety factor of 2:1 exceeds industry standard of 1.5:1 sMax operating PSI: 10,500 PSI / 724 bar sMax blade opening: 197mm sMax cutting force: 1424kN sDeployment weight: 22.5kg s(W) 273mm x (H) 178mm x (L) 762mm sUL Classified Applications sCut open damaged vehicles and equipment Specifications sComplies with NFPA 1936:2010
s+ITINCLUDES1 x TNT TLS-50 Rescue Ram and 1 x 9m of hose sIdeal for heavy equipment and machinery due to a maximum push force of 229kN sAggressive ‘bear teeth’ edges on ram tip and base plates for better grip strength sGreater control and increased safety during displacement of load negates need for slippage attachments sTrue variable speed control and deadman control increases manageability in critical situations sDual pilot check valves for reliable and superior load holding sRam capability can be increased with optional extensions and push plates sMax operating PSI: 10,500 PSI/724 bar sClosed length: 546mm sExtended length: 1278mm sHighest push force: 229kN sDeployment weight: 21.5kg s(H) 216mm x (W) 114mm sUL classified Applications sOpen damaged vehicles or equipment Specifications sComplies with NFPA 1936:2010
Mfr No. TNT-BFC EXTH-PA
Part No. 0061 3436
Mfr No. TNT-TLS EXTH-PA
Description Rescue ram kit
Part No. 0061 3470
Rescue Spreader Kit
Power Unit Twin Simo 4.0hp Diesel Engine
s+ITINCLUDES1 x TNT S-100-32 Spreader and 1 x 9m of hose sTrue variable speed control and deadman control which increases manageability in critical situations sI-Beam design provides superior strength-to-weight ratio sD-shaped wraparound handle for easy operation in all positions for left and right handed operators sAdvanced super grip tip with aggressive serrations on all potential gripping surfaces including sides to minimise tool slippage and kick out sWear resistant anodised surface that protects the tool from corrosion sCan also be used with chain attachments/systems for pulling operations sInternal safety bleed valve to prevent over pressurisation within hose couplings sSafety factor of 2:1 exceeds industry standard of 1.5:1 sMax operating PSI: 10,500 PSI/724 bar sMax opening: 813mm sMax spread force: 225kN sMax pulling force: 102kN sDeployment weight: 20.6kg s(W) 342mm x (H) 165mm x (L) 894mm sUL Classified Applications sOpen damaged vehicles and equipment Specifications sComplies with NFPA 1936:2010
sYanmar 4.0HP diesel motor with electric start sTwo tool simultaneous operation sSupercharged hydrostatic two-stage radial piston pumps sTrue simo unit with two separate pumps sharing one reservoir sMax operating PSI: 10,500 PSI/724 bar sPump type: radial piston sMotor: 4.0hp (3kw) Yanmar diesel sDisplacement: 219cc sFuel tank capacity: 2.40L sApprox. fuel run time: 2.6 hours sDeployment weight: 51.3kg s(W) 447mm x (H) 508mm x (L) 566mm sUL Classified Applications sPower source for rescue equipment Specifications sComplies with NFPA 1936:2010
Mfr No. TNT-SL EXTH-PA
02-38
Description Rescue cutting kit
Description Rescue spreader kit
Part No. 0061 3487
Mfr No. TNT-DT-4.0
Description Power unit
Part No. 0061 3708