monogram.com

chimney hoods

Chimney hoods—islands General features Attractive design. Expertly crafted with uncompromising attention to detail, a Monogram hood adds a striking architectural highlight to your kitchen.

Monogram

Halogen lighting. Six levels of intensity are offered for different needs, from accent to ambient settings.

36" island vent hood

Removable filters. Filters can be easily detached from the hood for safe cleaning in your dishwasher.

ZV850SPSS/ZV855SPSS

ZV925SLSS

Overall dimensions (WxHxD in inches): 35-3/8 x 8-1/4 x 27-1/2 Amps @ 120VAC Approx. shipping wt. (lbs.)

Overall dimensions (WxHxD in inches): 35-7/8 x 3-3/4 x 27-9/16 Amps @ 120VAC Approx. shipping wt. (lbs.)

2.7 81

• 6" round exhaust duct • Required duct covers must be ordered separately • Reversible duct cover for vented or recirculating installation

professional hoods

For additional details on product installation, warranty coverage, care and maintenance, visit monogram.com.

ZV850SB

4.6 146

• 8" round exhaust duct • 8'–9' duct cover included • Optional extension duct covers available • Reversible duct cover for vented or recirculating installation

Custom hood inser ts

Recirculating options. An optional vent hood kit for recirculating operation can be installed on the ZV850. Model ZV925 is designed to be vented outdoors or to recirculate into the room air.

ZV900SJSS

36" island glass canopy vent hood

42" island vent hood

ZV1050SFSS

te l e s c o p i c d o w n d r a f t v e nt s

Powerful ventilation. The variable-speed fan blower provides the power necessary to capture the smoke and fumes produced by high-performance cooking equipment.

ZV1050SFSS

Overall dimensions (WxHxD in inches): 42 x 10 x 31-1/2 Amps @ 120VAC Approx. shipping wt. (lbs.)

6.7 150

• Dual blowers • 8" round exhaust duct • 8' ceiling duct cover included • Optional extension duct covers available

51

Advance planning for chimney hoods—island Stainless steel island hoods

Ductwork for Z V850/855SPSS

Chimney vent hoods are available in 42" and 36" widths.

This vent hood must use 6" round duct.

• Duct cover accessories to meet ceiling heights are required for the ZV850 island hood. One accessory must be ordered with the vent hood.

• Plan the shortest and straightest route for venting exhaust to the outdoors.

• The ZV925, ZV850 and ZV855 vent hoods are supplied with a two-piece decorative duct cover to reach an 8' to 9' ceiling. An optional duct cover accessory is available for 9'1" to 10'1" ceiling heights.

• For satisfactory performance, duct run should not exceed 100 feet equivalent length for any duct configuration. Refer to the duct fittings chart in the installation instructions.

• T he ZV1050 hood is supplied with a duct cover for an 8' ceiling height (7'11" to 8'1"). Optional duct cover accessories are available for 9' and 10' ceiling heights. • The installation height must be determined in advance for island chimney hood models. • All duct cover accessories must be ordered with the vent hood and be on-site at the time of installation. • Review the following chart to determine the appropriate accessory duct cover. Required duct cover accessories for vented installations

Ceiling height 8' Up to 9' Up to 10'

ZV850/ZV855 Included Included ZV8510SPSS

ZV925 Included Included ZX92510

ZV1050 Included ZX1059SFSS ZX10510SFSS

Structural suppor t These vent hoods are heavy. Adequate structural support must be provided. Hoods must be secured to cross-framing positioned between ceiling joists.

• Use metal ductwork only.

• Install a wall cap or roof cap with damper at the exterior opening. Order the wall or roof cap and any transition needed in advance.

Ductwork for Z V925SL SS This vent hood must use 8" round duct. • Plan the shortest and straightest route for venting exhaust to the outdoors. • Use metal ductwork only. • For satisfactory performance, duct run should not exceed 100 feet equivalent length for any duct configuration. Refer to the duct fittings chart in the installation instructions.

Ductwork for Z V1050SFSS This vent hood must use 8" round duct. • Plan the shortest and straightest route for venting exhaust to the outdoors. • Use metal ductwork only.

• The vent hood and duct cover(s) must be on-site before final framing and wall finishing. This will help to accurately locate the ductwork and electrical service.

• For satisfactory performance, duct run should not exceed 100 feet equivalent length for any duct configuration. Refer to the duct fittings chart in the installation instructions.

• Final installation will be much easier if the hood is installed before the range or cooktop below.

• Install a wall cap or roof cap with damper at the exterior opening. Order the wall or roof cap and any transition needed in advance.

• Mounting templates are provided with the installation instructions to help accurately position the hood on the ceiling above the cooking surface.

Electrical requirements These vent hoods must be supplied with 120V, 60Hz, and connected to an individual, properly grounded branch circuit protected by a 15- or 20-amp circuit breaker or time-delay fuse. • The junction box is located on top of the hood. Route the wiring as close to the installation as possible through the ceiling. Refer to the installation instructions for details.

Recirculating installation The ZV850/855 hood is designed to be vented to the outside, but it can easily be converted for recirculating operation. Recirculating kits are included for the ZV850/855 hood. These kits include charcoal filters, a support frame with air deflector and a vented decorative duct cover to complete the installation. Kits are sized for ceiling height. The ZV925SLSS is designed for either vented or recirculating operation. All necessary parts are included. The ZV1050 is not convertible to recirculating operation.

605Dia152 52

monogram.com

Product dimensions and clearances

Using duct cover accessories

This stainless steel hood can be installed over any Monogram® cooktop except Professional models. Accessories to meet correct ceiling heights are required.

A duct cover accessory is required for all ceiling heights. Use this chart to determine the correct duct cover accessory for 8' to 10' ceilings that must be ordered with the hood.

chimney hoods

Advance planning for chimney hoods—island

36" Min.

This vent hood must be installed 24" minimum to 30" maximum above the cooking surface; 25-1/2" is recommended to ensure that the duct cover meets the ceiling. The cooking surface should be at least 36" above the floor. A mounting template is provided with the installation instructions to help position the hood above the cooking surface and to locate the mounting brackets. Charcoal filter replacements are available from your dealer or by calling 800.626.2002. Order catalog number WB02X10731.

professional hoods

Upper frame 31" Supplied lower frame

Lower duct 18" Upper duct 18"

Lower duct 26 -1/4" Upper duct 26 -1/4"

Custom hood inser ts

24" to 30"

24" 24" to 25" 24" to 26" 24" to 27" 24" to 28" 24" to 29" 24" to 30" 24" to 30" 24" to 30" 24" to 30" 24" to 30" 24" to 30" 24" to 30" 25" to 30" 26" to 30" 27" to 30" 28" to 30" 29" to 30" 30"

te l e s c o p i c d o w n d r a f t v e nt s

605Dia150

24" 24" to 25" 24" to 26" 24" to 27" 24" to 28" 24" to 29" 24" to 30" 25" to 30" 26" to 30" 27" to 30" 28" to 30" 29" to 30" 30" 24" 24" to 25" 24" to 26" 24" to 27" 24" to 28" 24" to 29" 24" to 30" 24" to 30" 24" to 30" 24" to 30" 24" to 30" 24" to 30" 24" to 30" 24" to 30" 24" to 30" 25" to 30" 25" to 30" 26" to 30" 27" to 30" 28" to 30" 29" to 30" 30"

ZX8510SPSS – accessory duct covers

27-1/2"

24" 24" to 25" 24" to 26" 24" to 27" 24" to 28" 27" to 29" 28" to 30" 29" to 30" 30"

ZX8510SPSS – accessory upper frame

35-3/8" (excluding utensil rods) 36-1/2" (including utensil rods)

7' 11" 8' 0" 8' 1" 8' 2" 8' 3" 8' 4" 8' 5" 8' 6" 8' 7" 8' 8" 8' 9" 8' 10" 8' 11" 8' 7" 8' 8" 8' 9" 8' 10" 8' 11" 9' 0" 9' 1" 9' 2" 9' 3" 9' 4" 9' 5" 9' 6" 9' 7" 9' 8" 9' 9" 9' 10" 9' 11" 10' 0" 10' 1" 10' 2" 10' 3" 10' 4"

Possible recirculating installation height

Supplied duct covers

8-1/4"

Ceiling height

Possible vented installation height*

Supplied frame

*Height to Ceiling

Lower frame 20 -3/4" Lower frame 20 -3/4"

ZV850/ZV855 installation heights

Model ZV850/855SPSS *50-1/8" for 10' ceiling using ZX8510SPSS accessory

*Based on 36" countertop height.

Duct Cover Dimensions ZX8510SPSS Duct Cover Accessor y This accessory is available for installation with ceiling heights above 8'7" to 10' and higher. This accessory consists of two 26-1/4" duct covers and a 31" upper support frame piece.

9-7/16" 20-3/4" 20-3/4"

Supplied duct cover

15-3/4"

The serial plate is located behind the removable filters.

53

Advance planning for chimney hoods—island Product dimensions and clearances

Determine installation height

This glass canopy hood can be installed over any Monogram® cooktop (except Professional models).

Use this chart to accurately determine installation height, depending on your ceiling height.

14"

Side Trim

Supplied duct covers

Duct cover accessory

Trim

23-1/4"

NOTE: ZX92510 accessory consists of one 36-3/4"-long duct cover.

24-3/4"

12-3/16"

54

Mounting frame height 30-1/2" 30-1/2" 34-1/2" 30-1/2" 34-1/2" 30-1/2" 34-1/2" 30-1/2" 34-1/2" 38-1/2" 34-1/2" 38-1/2" 34-1/2" 38-1/2" 34-1/2" 38-1/2" 42-1/2" 38-1/2" 42-1/2" 38-1/2" 42-1/2" 38-1/2" 42-1/2" 46-1/2" 42-1/2" 46-1/2" 42-1/2" 46-1/2" 42-1/2" 46-1/2" 50-1/2" 46-1/2" 50-1/2" 46-1/2" 50-1/2" 46-1/2" 50-1/2" 54-1/2" 50-1/2" 54-1/2" 50-1/2" 54-1/2" 50-1/2" 54-1/2" 54-1/2"

Accessory ZX92510

ZV925 installation heights Hood *The supplied duct Possible installation *Height cover is sized to ceiling height height* to 7' 11" 25" fit 8' to 9' ceiling Ceiling 8' 0" 27" heights. 8' 1" 24" For 9'1" to 10'1" 8' 1" 28" 2-3/4" ceilings, order 8' 2" 25" ZX92510. 35-7/8" 27-9/16" 8' 2" 29" 8' 3" 26" 8' 3" 30" NOTE: Measure 8' 4" 27" installation height 8' 5" 24" from the cooking 8' 5" 28" surface to the outer 8' 6" 25" glass portion of 8' 6" 29" the hood. 8' 7" 26" Min. 24" 8' 7" 30" 30" Max. 8' 8" 27" 8' 9" 24" 8' 9" 28" 8' 10" 25" 8' 10" 29" 36" Min. 8' 11" 26" 8' 11" 30" 9' 0" 27" 9' 1" 24" POWERCREATIVE • This hood must be installed 24" minimum to 30" maximum 9' 1"__ 28" File_Name:_A10577.eps _ Date:_6/19/08 Desc./Specs:_1_pgs/1c 9' 2"Operator:_bj 25" above the cooking surface. The cooking surface should be at PowerSource /gea_art/originals _ 9' 2"Proofreader/PC________________ 29" _NOTES:___________ __ least 36" above the floor. ___________________________ Art_Director___________________ 26" ___________________________ 9' 3" Copywriter__ _________________ ___________________________ Important Account_Executive__ ____________ 30" ___________________________ 9' 3" Assoc._Creative_Dir.__ ___________ ___________________________ • The hood installation height depends on the ceiling ___________________________ 9' 4"Format______________________ 27" height. Use the chart shown to determine the EXACT 9' 5" 24" installation height. 9' 5" 28" 9' 6" 25" • Duct cover side trim pieces are provided and must be used 9' 6" 29" to cover installation screws. They are sized to fit the specific 9' 7" 26" installation heights shown in the chart. 9' 7" 30" 9' 8" 27" • This hood can be installed for recirculating operation. 9' 9" 24" No kits required. 9' 9" 28" A mounting template is provided with the installation 9' 10" 25" instructions to help position the hood above the cooking 9' 10" 29" 9' 11" 26" surface and to locate the mounting brackets. 9' 11" 30" 10' 0" 27" ZV925SLSS duct cover dimensions 10' 1" 28" Side *Based on 36" countertop height.

Model ZV925SLSS

The serial plate is located behind the removable filters.

Charcoal filter replacements are available from your dealer or by calling 800.626.2002. Order catalog number WB02X11284.

monogram.com

Product dimensions and clearances

Using duct cover accessories

This stainless steel hood can be installed over any 30" or 36" Monogram cooktop or range, including professional models.

A duct cover accessory may be required for your hood installation height. Use this chart to accurately determine the need for a duct cover accessory.

42"

This vent hood is supplied with a decorative duct cover to reach 8' ceiling height, or between 7'11" and 8'1".

605Dia153

*30" Recommended

36" Min.

*9' to 10' ceilings may be 25-1/2" to 30" clearance.

605Dia172

This vent hood must be installed 25-1/2" minimum to 30" maximum above the cooking surface. The distance between the cooking surface and the bottom of the hood must be at least 25-1/2". The 30" recommended installation height above the standard 36" countertop will ensure duct cover fit to the ceiling. For 9' and 10' ceiling heights, the hood may be lowered to 25-1/2" over the cooking surface.

professional hoods

31-1/2"

Supplied

Custom hood inser ts

10"

Duct cover accessory

10-3/4"

ZV1050 duct cover dimensions Accessory

A

B

Supplied

11-1/2"

12"

ZX1059SFSS

19"

20"

ZX10510SFSS

25"

26"

The serial plate is located behind the removable filters.

te l e s c o p i c d o w n d r a f t v e nt s

32" for 9' ceiling using ZX1059SFSS accessory 44" for 10' ceiling using ZX10510SFSS accessory

ZV10S0SFSS installation heights Possible hood Actual installation ceiling height height* 7' 11" 29" 8' 0" 30" 8' 1" 30" 8' 2" 25-1/2" to 30" 8' 3" 25-1/2" to 30" 8' 3" 25-1/2" to 30" 8' 4" 25-1/2" to 30" 8' 5" 25-1/2" to 30" 8' 6" 25-1/2" to 30" 8' 7" 25-1/2" to 30" 8' 8" 25-1/2" to 30" 8' 9" 25-1/2" to 30" 8' 10" 25-1/2" to 30" 9' 0" 25-1/2" to 30" 9' 1" 25-1/2" to 30" 9' 2" 25-1/2" to 30" 9' 3" 25-1/2" to 30" 9' 4" 25-1/2" to 30" 9' 5" 25-1/2" to 30" 9' 6" 25-1/2" to 30" 9' 6" 25-1/2" to 30" 9' 7" 25-1/2" to 30" 9' 8" 25-1/2" to 30" 9' 9" 25-1/2" to 30" 9' 10" 25-1/2" to 30" 9' 11" 25-1/2" to 30" 10' 0" 25-1/2" to 30" *Based on 36" countertop height.

Accessory ZX1059SFSS

*Height to Ceiling

Accessory ZX10510SFSS

Model ZV1050SFSS *20" for 8' ceiling using supplied duct cover

chimney hoods

Advance planning for chimney hoods—island

16"

• When installing this island hood above a Monogram professional range or rangetop, installation clearance must be at least 30". A mounting template is provided with the installation instructions to help position the hood above the cooking surface and to locate the mounting brackets.

Important: Clearances may vary due to type of cooking product and local codes. Check with local inspectors to be sure the standard is applicable.

55

Pairing hoods with cooking equipment Monogram® hoods are designed to perfectly coordinate with Monogram ranges and cooktops. To learn which cooking products can be combined with the hood you have selected, refer to the charts below. Wall-mounted ZV755SPSS ZV750SPSS

ZV800SJSS

ZV830SMSS

ZV925SLSS

Downdraft ZVB36STSS ZVB30STSS

All non-pro cooktops

All non-pro cooktops

All 30" non-pro All non-pro cooktops cooktops

All 30" and 36" cooktops and All non-pro ranges cooktops

All 30" and 36" cooktops and All non-pro ranges cooktops

All non-pro cooktops

Chimney

Chimney (slide-out)

Chimney

Chimney

Chimney

Chimney

Chimney

Chimney

Telescopic downdraft

36"

36"

30"

36"

36"

36"

42"

36"

36"/30"

460 CFM

420 CFM

490 CFM

690 CFM

1040 CFM

490 CFM

390 CFM

7.0 220/2.0

9.0 190/2.0

8.0 230/2.0

6.0 330/1.3

10.0 450/2.5

8.0 230/2.0

10.5 170/2.5

8'–10' options

8'–12' options

8'–10' 5" options No

8'–10' 4" options No

8'–10' 1" options No

8' to 10' duct cover included; or undercabinet option

7'11" to 10' duct cover included; 10' to 12' duct cover optional

8' to 9' 5" duct cover included; 9' 6" to 10' 5" duct cover optional

8', 9' or 10' duct cover included; 10' to 14' duct cover optional

8' to 8' 7" duct cover included; 9' to 10' 1" duct cover optional

8'1" duct cover ­included, 8'2" or 10' duct cover optional

8' to 9' duct cover included; 9' 1" to 10' 1" duct Indoor remote cover optional blower option

6" round

8" round

8" round

8" round

6" round

8" round

8" round

3-1/4" x 10" rect.

100'

100'

100'

100'

100'

100'

100'

100'

ZV900SLSS

ZV950SDSS

Island ZV855SPSS ZV850SPSS

ZV1050SFSS

Installation combinations

Style

Width High speed ­blower rating 490 CFM 350 CFM 10.0, 6.0 Sones 210/2.0, working speed 170/1.1 Recirculating option 8'–10' 8" options Vented duct cover options 8' to 9' 2" duct cover included; 9" to 10' 3" duct cover optional Duct size 6" round Equivalent duct length 100'

Professional wall-mounted ZV48TSFSS ZV48SSFSS ZV36TSFSS ZV36SSFSS ZV30TSFSS ZV30SSFSS

ZV48RSFSS ZV36RSFSS ZV30RSFSS

All Monogram cooktops and ranges

All Monogram cooktops and ranges

Tapered

490 CFM 350 CFM 10.0, 6.0 210/2.0, 170/1.1

Professional island

Wall or island hood inserts

ZV30HSRSS

ZV42ISHSS

ZV54ISHSS

ZVC36LSS Zvc30LSS

ZVC48LSS ZVC42LSS

All Monogram cooktops and ranges

All Monogram 30" cooktops and ranges

All 30" and 36" cooktops

All Monogram cooktops and ranges

All 30" and 36" cooktops and ranges

All Monogram cooktops and ranges

Straight

Restaurant

Wall-mounted/ undercabinet

Tapered

Tapered

Insert

Insert

48"/36"/30"

48"/36"/30"

48"/36"/30"

30"

42"

54"

36"/30"

48"/42"

1090/620/620 CFM 13.0, 9.0 430/2.5 240/1.1

1090/620/620 CFM 13.0, 9.0 430/2.5 240/1.1

1090/620/620 CFM 13.0, 9.0 430/2.5 240/1.1

530 CFM

1090 CFM

1090 CFM

640 CFM

1140 CFM

9.0 240/2.0

13.0 430/2.5

13.0 430/2.5

14.0 250/3.5

16.5 490/4.0

No

No

No

Yes

No

No

No

No

Optional 6" and 12" duct covers; stackable

Optional 6" and 12" duct covers, standard or full-width; stackable

Optional 6" and 12" duct covers, standard or full-width; stackable

7'11" to 8'5" duct 3-1/2 risers with cover included, 8'6" to 10'4" duct and without ­louvers included cover optional

7'11" to 8'5" duct cover included, 8'6" to 10'4" duct cover optional N/A

N/A

10" round

10" round

10" round

8" round

10" round

10" round

8" round

8" round

150'

100'

150'

150'

100'

100'

Installation combinations

Style Width Blower rating

Sones working speed Recirculating option Vented duct cover options

Duct size Equivalent duct length 42

150' 150' Note: Cooktop or range not to exceed vent hood width

chimney hoods

monogram.com

The Home Ventilating Institute (HVI) is a third-party certification organization focused on providing a fair and credible method of comparing ventilation performance of similar products. Many agencies such as Energy Star® and ASHRAE utilize HVI certification for performance assurance. All Monogram ventilation products are certified by HVI.

professional hoods

Some key performance criteria measured by HVI are sound level measured in sones, high speed and working speed measured in cubic feet per minute (cfm). A sone is an internationally recognized measurement of sound output. Sones translate decibel ratings into numbers that correspond to the way people sense loudness. The lower the sone number the quieter the sound. Working speed is defined as the speed that produces 100 cfm, or the lowest speed above 100 cfm that a hood can produce, when working on the same duct system as the maximum speed.

te l e s c o p i c d o w n d r a f t v e nt s

Custom hood inser ts

(HVI916, March 1, 2009) (http://hvi.org/faqs.html)

43