Welcome A b o u t T h e Vi t e c G r o u p

Welcome to the RF Extreme Product Guide

Click here for:

Table of Contents

Microwave Service Company

Nucomm

RF Central

© Copyright 2009, The Vitec Group plc. All rights reserved.

RF Extreme Sales

■

t.+1.877.732.5250

■

www.rfextreme.com

Table of Contents 1

Down Converters RFX-UHF Down Converters. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 RFX-Down Converters 5.8; 6.4; 7.1 GHz to 2 GHz . . . . . . . . . . . . 5

About Nucomm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Digital/Analog STL Systems Digital STL Systems NuLinx . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 FMT4/FMR4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Fixed Link Antennas and Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Digital Modulators/Demodulators

Central Receivers Newscaster CR7 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 Newscaster DR2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 Newscoder RX7 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 Newscaster DR1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

Central Receive Antenna Systems ProScan DR3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 UltraScan DR2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31 Ellipse DR2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32 Digital-Ready Upgrade Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32 Flat Panel Sector Scan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33 Quad Sector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33 Omni Pole Directional Receive Antennas . . . . . . . . . . . . . . . . . . . . 34

Central Receive Accessories

MM200 Multi-Rate Modem . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Analog Coder2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 V-Stream2 8VSB IF Modulator/Demodulator . . . . . . . . . . . . . . . . 10

Other Digital Products SE4000 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 TDR4022 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Digital/Analog ENG/OB Systems Digital ENG/OB Transmit Systems Newscaster VT7 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Newscoder TX7 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 TruckPac . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

IP ENG and IFB Systems Messenger . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 ProQ System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

ENG/OB Transmit Antennas Omni Directional Transmit Antennas . . . . . . . . . . . . . . . . . . . . . . . . . . 16 Newsblaster/Megablaster . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Digital/Analog Portable and Airborne Systems

Digi-BDC

.................................................................

35

Master Control Systems Navigator2 Control System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 TouchStar™ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

About RF Central . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37 Transmitters: RFX-PHT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38 RFX-PHT-II . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38 RFX-CMT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39 RFX-CMT-II . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39 RFX-RMT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 RFX-RMT-II . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 RFX-ENG . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41 RFX-ENG-II . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41 RFX-ENG-II Dual Band . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42 RFX-NLL-II . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42 RFX-BRK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43 RFX-PDT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43 RFX-GL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44

Receivers

Digital Portable and Airborne Systems ChannelMaster TX7/RX7 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 Newscaster DR2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 ChannelMaster TX7s/RX7s . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 Access RC Remote Control Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 SkyLink™ C100 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 CamPac . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 CamPac2 Pro/News . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 GoPac2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 Newscaster DR1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 NewsHub . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 Skylink HD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 Megahorn . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 Portable Parabolic . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 Truncated Antenna Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

Portable Specialty Antennas Portable Specialty Antennas . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 High-Gain Collinear Omni Antennas . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 Quad-Helix Omni Antennas . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 Collinear Omni Antennas . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 Compact Sector Antennas . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

■

RFX-RMR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45 RFX-RMR-II . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45 RFX-PRX-II . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46 RFX-PMR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46 RFX-PMR-II . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47 RFX-RMR-X6 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47 RFX-RMR-X6-II . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48 RFX-RMR-X6-II-D . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48 RFX-MDR-PC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49 RFX-GL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49

Amplifiers

Portable and Airborne Antennas and Accessories

RF Extreme Sales

Digital/Analog Central Receive Systems

RFX-MMPA

..............................................................

50

Accessories RFX-SMS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51 RFX-MCF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51 HD ExtremeCam . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52 RFX-HD-D . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52

t.+1.877.732.5250

■

www.rfextreme.com

Ta b l e o f C o n t e n t s

About The Vitec Group . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 About RF Extreme . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 About Microwave Service Company . . . . . . . . . . . . . . . . . . . 4

The Vitec Group 2

the broadcast, entertainment and photographic industries. Vitec is based on multiple, well known, premium brands that professionals rely on. Vitec is organized in three divisions: Imaging and Staging, Broadcast Systems and Broadcast Services. Our strategy is to grow closer to our end customer, providing them with ever better tools and services to do their job, while at the same time looking for complementary areas into which the group can expand and utilize its industry-leading expertise. After an initial consolidation phase which yielded economies of scale, during which multiple locations and smaller units were brought into a divisional structure, the focus has shifted to leveraging our skills to develop new products and exploit our routes to market. This phase of the strategy is delivering meaningful growth.

RF Extreme Sales

■

t.+1.877.732.5250

■

www.rfextreme.com

A b o u t Vi t e c G r o u p

Vitec Group serves worldwide customers in the media sector with products and services for

RF Extreme 3

■

Nucomm is a worldwide provider of premier digital and analog video microwave systems for portable and fixed link applications.

■

RF Central manufactures and supplies state-of-the-art microwave equipment to television broadcast and government customers throughout North, Central and South America.

■

Microwave Service Corporation is a premier international microwave equipment service facility and equipment supplier that provides superior microwave radio rental, sales and support.

With RF Extreme, broadcasters and other video professionals now have even easier access to Nucomm and RF Central brand products, as well as MSC services. RF Extreme is backed by integrated engineering, technical and customer support resources to assure best-in-class service. RF Extreme provides high-quality microwave solutions to professional users in distinctive global markets including broadcast, sports/entertainment and military, aerospace and government.

© Copyright 2009 The Vitec Group plc. All rights reserved. ™RF Extreme is a trademark of the Vitec Group plc.

RF Extreme Sales

■

t.+1.877.732.5250

■

www.rfextreme.com

About RF Extreme

The RF Extreme business unit of the Vitec Group comprises the digital and analog video microwave brands Nucomm, RF Central and Microwave Service Company (MSC):

About Microwave Service Company 4

facility and equipment supplier that provides the broadcast industry with superior repair service, used equipment sales and microwave equipment for rental/lease. The company offers a full line of portable and fixed microwave radio equipment from 2 GHz to 40 GHz to include antenna and tripod accessories. It services equipment, old and new, from all the leading radio manufacturers, and purchases used and obsolete equipment that has been taken out of service.

Microwave Service Company 15 Thornton Ave Haverhill, MA 01832 T.978.556.0970 www.microwaveservice.com

© Copyright 2009 The Vitec Group plc. All rights reserved. ™Microwave Service Company is a trademark of the Vitec Group plc.

RF Extreme Sales

■

t.+1.877.732.5250

■

www.rfextreme.com

About Microwave Service Company

Microwave Service Company (MSC) is a premiere international microwave equipment service

RFX-UHF Down Converters 5

Features: Downconvert to the UHF Band (450-850 MHz)

•

Models: -

BDC 4550-4200

-

BDC 5760-5200

-

BDC 6467-5850

-

BDC 6871-6400

-

BDC 6471-6250

•

Additional frequencies available

•

RF Input Noise Figure: 3.5 db

•

Input Impedance: 50 Ω

•

Input Level: -20 to -90 dBm

•

LO Leakage: -65 db

•

Frequency Stability: ±2.5 PPM

•

Output Impedance: 75 Ω

•

Power Requirements: 11-25 Vdc

Down Converters

Microwave Services' UHF down converter was designed to convert a range of high frequency digital COFDM and analog transmissions to the UHF frequency range. It is a single conversion BDC with low phase noise and high linearity. Its front end features a LNA and ceramic filter that deliver a 3.5db noise figure with an overall typical conversion gain of 24db. DC power can be supplied locally or remotely through coax to the IF output. All products are RoHs compliant.

•

•

160 mA current std. Maximum 250 mA

•

Weight: .375 lbs

•

Size: 3.31 x 2.82 x .832 inches

•

Optional outdoor enclosure

RFX-Down Converters 5.8; 6.4; 7.1 GHz to 2 GHz Features:

Microwave Services’ 5/6/7 GHz Block Down Converter is designed to down convert digital COFDM and analog transmissions to the 2.0-2.7 GHz range. It is a single conversion BDC with low phase noise and high linearity. Its front end features a LNA and ceramic filter that deliver a 3.5db noise figure with a minimum conversion gain of 24db. DC power can be supplied locally or remotely via the coax cable to the IF output. All products are RoHs compliant.

•

Downconvert to the 2.0-2.7 GHz band

•

Models: -

BDC 5864-3750

-

BDC 6471-4420

-

BDC 7177-5000

•

Additional frequencies available

•

RF Input Noise Figure: 3.5 db

•

Input Impedance: 50 Ω

•

Input Level: -20 to -90 dBm

•

LO Leakage: -65 db

•

Frequency Stability: ±2.5 PPM

•

Output Impedance: 50 Ω

•

Power Requirements: 11-25 Vdc

•

160 mA current std. Maximum 250 mA

•

Weight: .375 lbs

•

Size: 3.31 x 2.82 x .832 inches

•

Optional outdoor enclosure

RF Extreme Sales

■

t.+1.877.732.5250

■

www.rfextreme.com

About Nucomm Defining the Future of HD

6

a proud history of offering products that are on the leading edge of technology both in features and in field performance. In keeping with that tradition, Nucomm has worked tirelessly to develop a broad line of products for today's digital environment with an eye on future technology. By focusing on innovation, product quality and customer satisfaction, Nucomm has gained a reputation as a provider of reliable, leading edge microwave systems that have broad appeal for broadcast, sports & entertainment, government, law enforcement and homeland security applications.

Our primary responsibility is to provide quality products that offer the latest technology and that will serve our customers for years to come. In the words of Dr. John B. Payne, the founder of Nucomm, “The key to our success is in maintaining a firm commitment to our customers, the industry and the technology.”

A History of Accomplishments • Developed the first truly integrated transmitters with multiple modulation formats, e.g. ChannelMaster TX and Newscaster VT2 • First to demonstrate IP file transfer capability from a news vehicle • Developed a high performance central receiver with Ethernet interface, multiple modulation formats and optional spectrum viewer • First to use VSB modulation in a digital microwave link • Developed digital transmission techniques for use over conventional analog links, e.g. the Analog Coder • First to demonstrate the advantages of digital transmission for electronic newsgathering • Pioneered advanced features in early analog portable microwave transmitters and receivers, including the use of surface mount technology, built-in color bar/test pattern/ID generator, field adjustable audio subcarriers, multi-band

Nucomm 101 Bilby Road Hackettstown, NJ 07840 T.908.852.3700 800.968.2666 www.nucomm.com

RF Extreme Sales

■

t.+1.877.732.5250

■

www.rfextreme.com

About Nucomm

Nucomm is a worldwide provider of premium digital and analog microwave systems and has

NuLinx Digital/Analog Fixed Link Systems

7

Features: • Digital performance to 120 Mbps (25 MHz bandwidth) • Broadband linearized RF power amplifiers • Low noise, high dynamic gain LNA with AGC • RS232 and Ethernet interfaces

Options: • Simplex, duplex and hot standby

NuLinx TX and RX The NuLinx series fixed link radios brings new meaning to the word flexibility, offering features such as comprehensive front panel control of parameters, frequency agility, remote control and monitoring capability over either RS-232 or Ethernet interfaces.

• SNMP control and monitoring • Space diversity with error-free seamless switching • Systems design, integration and commissioning • High power available for long paths

Designed with state of the art high performance RF components including YIG oscillators and linearized power amplifiers, the NuLinx TX and RX pair are ideal for virtually any digital or analog transport requirement. The basic unit accepts 70 MHz input (TX) from either a digital or analog modulator. Modulation formats such as FM, VSB, COFDM, QPSK or 16 to 128QAM are typically used. Nucomm manufactures a full line of companion modulator/demodulator products (see pages 4 and 5). The NuLinx is available in bands from 1.3 to 15.4 GHz.

NuLinx Transmitter and 8VSB Modem (For self-contained system, see the V-Stream2 on page 10)

NuLinx and MM200 Multi-Rate Modem (see the Multi-Rate Modem on page 9)

RF Extreme Sales

■

t.+1.877.732.5250

■

www.rfextreme.com

Digital STL Systems

• Supports FM, VSB, QPSK, COFDM, and 16 to 128QAM

FMT4/FMR4 Analog 70 MHz FM Modulator/Demodulator

8

Features: • Complete system diagnostics • Up to four synthesized FM audio subcarriers, field programmable • EIA/CCIR Video with low-pass filter • Clamped output standard on demodulator

Options: • Video presence detector • Built-in test generator with color bar and ID

Nucomm’s series FMT4/FMR4 is a family of self-contained rackmounted baseband or 70 MHz modulators and demodulators that provide the baseband interface for audio and video to and from baseband or 70 MHz. Up to three complete FM modulators or demodulators can be integrated into a two vertical rack space drawer (3.5”, 8.89 cm). An EIA/CCIR video emphasis/de-emphasis network is included in each unit. This network can be bypassed to provide a flat video response if desired. Any power requirement can be met including a universal AC/DC power supply. Up to four field programmable synthesized FM audio subcarriers can be integrated into each FM modulator and demodulator. Each audio subcarrier frequency is independently field tuneable by internal dip switches to any frequency in 5 kHz steps.

Fixed Link Antennas and Accessories Nucomm offers a complete range of antenna, coaxial cable, waveguide and hardware products for fixed tower mounting applications. Please contact Nucomm for a detailed quotation specific to your application.

Accessories: • High gain directional antennas • Waveguide and accessories • Other specialty antennas available upon request

RF Extreme Sales

■

t.+1.877.732.5250

■

www.rfextreme.com

Digital STL Systems

• 1 to 3 FM modulators or demodulators per drawer

MM200 Multi-Rate Modem High Speed Applications with Data Rates to 200 Mbps

9

Features: • Up to four user-selectable data/overhead interfaces • Seamless hot standby and space diversity switching are available • Duplex configuration available • Reed-Solomon forward error correction • Adaptive equalization • Remote control from network or serial interface • Companion to Nucomm’s NuLinx This innovative and highly flexible modem is configurable for data rates between 1 and 200 Mbps. The unit allows complete control over modulation density and channel bandwidth for efficiencies up to 6 bits per second per Hz. The unique architecture of the MM200’s IF allows large improvements to fading and multipath via multiple digital equalizers when used with the Nucomm’s NuLinx microwave transmitter and receiver. The MM200 is an ideal solution for both new and retrofit microwave link installations. Maximum flexibility is achieved by an internal data multiplexer that combines up to four user selectable data paths into a single data stream. The IF can be field-configured with one to four channels providing total flexibility. Each channel can operate up to 7 Mbaud.

Interfaces: • G.703 DS3, E3 or STS-1, DVB-ASI, SMPTE-310M • RS422 parallel, DVB parallel, MP2P • LVDS parallel, DVB parallel • T1/E1 wayside • 10 base T • OC3 optical, STM1/ STS3

Analog Coder2 Converts an Analog Link into a Digital Link Features: • Variable data rates from 1 to 25 Mbps • Integrated two I/O multiplexer/demultiplexer • No retrofit of existing STL required • Excellent for multi-hop systems • Multiple interfaces: both SMPTE-310M and DVB-ASI • FEC includes Viterbi, Reed-Solomon, Interleaving • Adaptive equalization • De-jittered SMPTE-310M and DVB-ASI outputs The Analog Coder2, a cost-effective solution for upgrading an existing analog microwave link to handle a variety of digital signals, now accepts input data rates from 1 to 30 Mbps. Signals such as the ATSC 19.39 Mbps data stream plus a T1 Data Pack can be transmitted without any loss in signal quality. The inputs and outputs are DVB-ASI and SMPTE-310M. The demodulator outputs a channel 3 or 4, 8VSB RF signal that provides for displaying and monitoring of the HD picture being sent over the microwave link. Features include an integrated multiplexer/demultiplexer consisting of two ASI or one ASI and one SMPTE-310M inputs or outputs. The Analog Coder2 is ideal for single or multi-hop links. HDTV signals have been transported through a 24-hop repeater system using the Analog Coder2 without any degradation in signal or picture quality.

• T1/E1 Data Pack includes: T1/E1, 2 x RS-232, eight logic inputs, four logic and four form C relay outputs • Higher output power than digital radios • RS-232 performance monitoring includes packet errors and signal quality • Universal AC/DC power supply optional

Advantages: • Uses existing analog infrastructure • No modification to existing radios required

RF Extreme Sales

■

t.+1.877.732.5250

■

www.rfextreme.com

Digital Modulators/Demodulators

• 4, 16, 32, 64, 128 and 256QAM operation

V-Stream2 8VSB IF Modulator/Demodulator Variable Data Rates from 1 to 30 Mbps

10

Features: • Variable data rates from 1 to 30 Mbps

• The 8VSB advantages (using fifth generation technology): - Optimized forward error correction - Advanced adaptive equalization - Performs well over long paths and multiple hops - Monitoring capability—DTV and bit error rate The V-Stream 2 8VSB IF Modulator/Demodulator, using fifth generation technology, accepts any input data rate from 1 to 30 Mbps (including ATSC 19.39 Mbps plus a T1 Data Pack) and outputs a 7.5 MHz bandwidth 70 MHz RF signal using advanced 8VSB modulation. The V-Stream is a stand-alone product in a 1RU chassis. When combined with an existing digital-ready STL such as the Nucomm FT6/FR6 series, the V-Stream 2 provides a fully functional digital link for transporting such digital signals as the ATSC 19.39 HDTV. The system is variable rate and senses input data rates from 1 to 30 Mbps. The demodulator also provides a switchable channel 3 or 4, 8VSB RF output that allows display and monitoring of the HD picture being sent over the microwave link.

- 7.5 MHz spectral efficiency - Improved fade margins • Multiple interfaces: both SMPTE-310M and DVB-ASI - TX input auto-detects SMPTE-310M or DVB-ASI - RX output: (2) DVB-ASI or (1) SMPTE-310M and (1) DVB-ASI - T1 Data Pack includes: T1, 2 x RS-232, eight logic inputs, four logic and four relay outputs • RS-232 performance monitoring includes packet errors and signal quality • Universal AC/DC power supply optional

RF Extreme Sales

■

t.+1.877.732.5250

■

www.rfextreme.com

Digital Modulators/Demodulators

• Integrated multiple input multiplexer/demultiplexer optional

SE4000 DVB MPEG2 Contribution Encoder

11

Features: • Fully MPEG2 and DVB compliant • Front panel power switch • Backlit alphanumeric full-travel buttons • Large illuminated LCD display • 1RU compact rugged rack-mount chassis is ideal for DSNG and fixed links • Broadcast quality video and two stereo audio channels • Composite PAL/NTSC and SDI video inputs The SE4000 is built around the proven encoding technology to provide a complete encoder solution in a rugged 1RU chassis, making it ideal for fixed microwave links as well as mobile broadcast contribution applications. There are 24 user-programmable preset configurations that can be stored and recalled from the front panel menu. They can even be named by the user with the alphanumeric buttons to make them easy for the operator to remember. Secure Transmission: The optional BISS Mode 1 and Mode E are supported by the SE4000. In addition, the proprietary Privacy Guard Conditional Access (PGCA) comes standard. PGCA is a fixed key scrambling system that is addressable, and allows the decoder addresses to be added or deleted from the authorization list using the SE4000 front panel or remote control interface.

• Analog and AES serial digital audio inputs • AES embedded audio • Low delay mode for interviews • 1:1 redundant configuration with TRS1 switch • DS-3 Interface, optional • BISS Mode 1 and E conditional access (optional) • Remote controllable and configurable via web browser

TDR4022 DVB Professional MPEG2 Integrated Receiver/Decoder Features: • DVB-ASI I/O standard; DVB-S (QPSK/8PSK/16QAM) or DVB-S2 outputs optional; DS3/E3 input optional • ASI, QPSK/8PSK/16QAM, DS3, E3, DVB-S2—input options available • QPSK and ASI input options included in base unit • 4-port RF input switch included • BISS Mode 1 and E conditional access • Front panel power switch • Fully functional front panel control The TDR4022 provides a complete decoder and advanced demod solution in a rugged 1RU chassis, and is ideal for mobile broadcast applications as well as monitoring in network and cable head end use. The TDR4022 comes standard with both ASI and DVB-S QPSK demodulator; optionally, the TDR4022 can be configured with a 8PSK/16QAM demod, DS3 receiver, or DVB-S2 demod, using Radyne’s S2 technology. The TDR4022 supports all standard video (PAL/NTSC) and audio (MPEG, AC3, SMPTE-302M) formats, making the TDR4022 ideal for virtually every application. BISS Mode 1 and Mode E are supported by the TDR4022, in addition to the proprietary Privacy Guard Conditional Access (PGCA), a fixed key scrambling system included as a standard feature in SE4000 encoder and TDR4022 decoder. It is addressable, and, when used with an encoder such as the SE4000, allows individual decoders to be added or deleted from the authorization list. No special intervention is required on the part of the TDR4022 operator.

• Easy-to-use web browser control • Large illuminated LCD display • 1RU compact rugged rack-mount chassis is ideal for DSNG and sports/event contribution • Fully MPEG2 and DVB compliant • 4:2:0 or 4:2:2 operation • Broadcast quality video and two stereo audio pairs • Composite PAL/NTSC and SDI video outputs • Decode MPEG and AC3 stereo • Pass-through Dolby AC3 5.1 • Analog and AES serial digital audio outputs • SDI embedded audio • Supports teletext, closed captions and other VBI RF Extreme Sales

■

t.+1.877.732.5250

■

www.rfextreme.com

Other Digital Products

• 4:2:0 and 4:2:2

Newscaster VT7 HD/SD ENG/OB Van Transmitter

12

Features: • Space-saving single rack unit design • Integrated, selectable multiple modulation formats, FM/COFDM/VSB/QAM/DVB-S • Available in single, dual or tri-band using one RF head • Frequency agile via preset channels or in 250 kHz steps • Inputs: composite video, SDI (HD), DVB-ASI and 70 MHz

Newscaster VT7 Digital/Analog ENG/OB Van Transmitter

• Audio inputs: two analog standard, four audio available; AES/EBU, de-embedded from SDI • Integral SDI to composite converter for FM operation runs an entire vehicle SDI

Single or Multi-band RF Head

The Newscaster VT7 is a major step forward in van transmitter technology and offers more useful features than any other product in its class. The VT7 is available in 2, 7 or 13 GHz single band, 2+7 GHz dual band and 2+7+13 GHz tri-band configurations (other frequency bands available). The digital engine is comprised of a HD/SD encoder with adjustable long GOP encoding featuring I, P and B frames as well as a low delay mode. The COFDM modulator has full control over the modulation formats, bandwidth, data rate and guard interval.

• Front panel smart display for total control • Eight quick keys for easy operation and fast access to commonly used functions • Six quick-store presets allow quick access to user configurable parameters and setups • Dynamic color bars with field programmable ID • Remote control of all functions via RS-232/RS-485 • Omni antenna switching capabilities optional

For increased flexibility, a wide array of inputs are provided, including: video/audio, SDI (HD) with embedded audio, ADI and 70 MHz. The ASI input is ideal for use with an external MPEG2 encoder or in repeater applications. Two audio inputs are provided as standard, while four audios are available.

Options: • Pan and tilt control with optional joystick • DC operation • Universal AC/DC power supply

The VT7 is easy to use due to its eight quick keys, and six lockable quick-store presets, avoiding the need to drill deep into complicated menus. Channel plans for both the existing 2 GHz band and the new 2 GHz band are provided. An LCD smart display provides complete system control and allows setup of more advanced features. High output power is a huge advantage for ENG operations working in a competitive environment, and the VT7 is available with up to 10 watts of digital output power. It is configured with an AC power supply that accepts input voltages from 100 to 240 VAC.

7 GHz Omni

2 GHz Omni

Directional Antenna

7 GHz 4 Relay Outputs

2 GHz P &T

ntrol P & T Co

RF Head Video, audio, SDI, ASI, 70 MHz input

Coax carries 70 MHz plus all control signals

Joystick

Newscaster VT7 Transmitter

RF Extreme Sales

■

t.+1.877.732.5250

■

www.rfextreme.com

D i g i t a l E N G / O B Tr a n s m i t S y s t e m s

• HD/SD low latency MPEG2 encoding

Newscoder TX7 COFDM Modulator and HD/SD MPEG2 Encoder

13

Features: • HD/SD MPEG2 low latency encoding • Low latency digital and analog modulation parameters front panel selectable by LCD display • 6, 7 and 8 MHz bandwidth supported • Up to three modulation formats available for higher data rates, including: QAM, VSB, DVB-S • Outputs: Nucomm is pleased to introduce a new class of 70 MHz multi-format modulators. The NCTX7 series modulator outputs COFDM plus FM analog and can be expanded for other formats, including DVBS, VSB, or QAM. The Newscoder TX7 is the ideal for upgrading an existing digital ready transmitter to full HD/SD digital capability. Whether it’s the Nucomm Newscaster VT1 or another manufacturer’s transmitter, the broadcaster can now add COFDM and FM analog plus a third optional format transmit capability to any digital ready transmitter.

- DVB-ASI from MPEG2 encoder - 70 MHz • Inputs: - One composite video plus two analog audio (four audio with digital AES/EBU audio) available in both analog and digital modes - One HD/SD SDI digital video with de-embedding - One DVB-ASI input • Automatic digital-analog change over operation • RS-232 remote control and monitoring • Standard dynamic internal test generator with color bars and ID

TruckPac HD/SD ENG Truck Pac Transmit System Features: • Integrated HD/SD MPEG2 low latency encoder • Integrated multiple modulation formats including, COFDM, FM and VSB • Antenna polarity control • High/low power RF control • Dynamic color bars with field programmable ID

Includes: • ChannelMaster Transmitter • Mast mounted, RF amplifier The TruckPac ENG van transmit system is ideal for those who want the versatility of having a full up transmitter in the van that can be easily removed for tripod mounted portable applications when the need arises. The system includes a ChannelMaster TX7 Transmitter plus a high power mast mounted amplifier. The system includes all the features of the ChannelMaster transmitter including: integrated HD/SD low latency encoding, multiple modulation formats, intuitive ease of operation through quick keys and one touch presets. In addition the system includes a rack mounted power supply/control unit that controls antenna polarization, hi/low amplifier switching and provides a readout of the RF power at the antenna. The system is available in either 2 or 7 GHz single band or 2+7 GHz dual band configurations. Power amplifiers available include 12 W analog/5 W digital at 2 GHz, 10 W analog/5 W digital or 5 W analog/2 W digital at 7 GHz. An ultra high power amplifier yielding 10 W digital is optionally available.

• PS18 control drawer/power supply unit • Power amplifiers available include: - 12 W analog/5 W digital at 2 GHz - 10 W analog/5 W digital at 7 GHz - 5 W analog/2 W digital at 7 GHz

Options: • Ultra high power 10 W digital amplifier

RF Extreme Sales

■

t.+1.877.732.5250

■

www.rfextreme.com

D i g i t a l E N G / O B Tr a n s m i t S y s t e m s

• COFDM DVB-T compliant QPSK, 16QAM and 64QAM plus FM analog

Messenger IP Video File Encapsulator/Decapsulator

14

Application: • Enables existing digital ENG/SNG products to provide a seamless IP connection to and from the news vehicle • Allows web browsing from news vehicle • Provides access to studio video and news servers • Remote talent cueing • Truck remote control

Features: The Nucomm Messenger system enables broadband IP connectivity between an ENG/OB/SNG truck and the broadcast studio. With new workflows, stories can be edited in the field and delivered to the studio over alternative networks. Using an IP network, remote cueing, remote truck control and other applications can also run between the studio and the ENG vehicle. The Nucomm Messenger can use either the Opportunistic Data Insertion (ODI) mode or the broadband mode. In ODI mode, live video is sent within available bandwidth of the MPEG encoder. In the broadband mode, nearly the entire link is dedicated to IP traffic. In this mode, the encapsulator responds automatically to the changing network conditions. IP data from the news gathering vehicle to the studio flows through the existing ENG/SNG infrastructure. The outbound IP traffic enters the Messenger IP Intelligent router and if the broadband ENG/SNG link is available, the IP traffic is encapsulated into the MPEG stream from the MPEG encoder in the ENG/SNG transmitter. The ASI stream, with IP and video data, then returns to the ENG/SNG transmitter, where it is transmitted back to the studio. If the backhaul is unavailable, a rule can be defined to reject the traffic or route it through lower speed interfaces. An ATSC receiver captures inbound IP Traffic from the studio. The MPEG transport stream then enters the Nucomm Messenger IP

• IP data encapsulation/decapsulation • Intelligent router—to maintain bi-directional network connection over multiple unidirectional and/or bi-directional links • User configurable rules-based routing for optimal connection speed • Integrated VPN • Cellular network enabled, bi-directional link support • WIFI 802.11 b/g enabled, bi-directional link support • Optional expansion slot to support VSB/COFDM, unidirectional link for back channel support • Future support for DRL back channel or other connections • Optional IFB low latency audio decoder Decapsulator, and the IP traffic is routed to the truck's network. The Messenger can also transfer files into a file store in the ENG vehicle and the files are then automatically transferred to a remote file server. The local editor can be used for other applications while the files are being streamed back to the studio.

RF Extreme Sales

■

t.+1.877.732.5250

■

www.rfextreme.com

IP ENG and IFB Systems

• Quick and effortless transfer of huge native video files to studio servers with little or no user intervention

ProQ DTV IFB System IFB Solution for ENG over ATSC

15

Applications: Cost-effective, high-performance IFB communications system between broadcast studios and news vehicles, remote news bureaus and live sports event coverage

•

Versatile, high speed IP communications between studios and remote vehicles and locations, enabling video file transfers when used with the Nucomm Messenger IP encapsulator system

Features: • The Nucomm ProQ DTV IFB system offers a cost-effective, highperformance approach to delivering low-latency multiple channel audio IFB communications using a DTV broadcast transmission. The complete ProQ DTV IFB solution includes the ProQ LLAM (low-latency audio multiplexer) and one or more ProQ DTV IFB receivers. The ProQ LLAM is integrated into the broadcast environment, usually immediately before the STL. The ProQ system also offers an expansion system for the LLAM that simplifies the process of feeding audio cueing and remote control signals into the ProQ LLAM. Until the ProQ system, digital IFB systems have suffered from either bit inefficiency or high latency. With the ProQ system, audio latency can be as little as 80 ms, while up to 8 separate remote cueing channels can be supported within one 200 kbps data channel. Audio cueing channels with the ProQ LLAM are processed with an MPEG Layer1/Layer 2 audio encoder and multiplexed into a single 200 kbps data channel, with each IFB subchannel clearly identified for easy reception by the appropriate remote talent and crew. The output of the ProQ audio encoder is multiplexed with the air channel, creating a single DTV transport stream. The ProQ LLAM also provides a fail-safe pass-through switch that ensures that the over-the-air signal is not compromised, even if the ProQ LLAM were to fail. To facilitate reception at the ENG van, remote news bureau or other remote location, the ProQ DTV IFB receiver incorporates dual UHF/VHF silicon tuners and dual 6th generation VSB demodulators for robust diversity reception. Audio output from the ProQ receiver is on a 5-pin XLR connector--either two channels of balanced, linelevel audio, or two AES-EBU digital audio signals. The ProQ receiver provides a built-in front-panel speaker as well as a front-panel headphone jack for audio monitoring. The ASI output enables monitoring of the received broadcast signal, while Ethernet, RS-232 and GPO contacts enable data communications with the remote local. When combined with an IP video file encapsulator/decapsulator like the Nucomm Messenger, the ProQ enables full-featured IP communications and file transfers between remote locations and the studio. The ProQ DTV IFB Receiver outputs the received DTV channel's transport stream onto the DVB-ASI output, allowing ASI-based equipment to analyze or monitor the DTV signal. In addition, the ProQ DTV IFB Receiver can stream the received transport stream over an IP connection (Video over IP) to a laptop or other IP enabled device for analysis and monitoring. The Nucomm ProQ is designed for easy and rapid user configuration. Using either the menus on the front panel OLED display or the

•

ProQ Multiplexer -

MPEG Layer 1/Layer 2 audio encoding

-

Encodes and multiplexes up to 8 audio cueing channels within one 200 kbps data stream (2 channels standard; optional groups of 2 channels)

-

Audio latency as low as 80 ms

-

Includes pass-through switch for broadcast transport stream

-

Optional Ethernet, RS-232 and GPI contacts

-

Compact size (5” x 1.75” x 8.5”)

ProQ Receiver -

Dual-diversity UHF/VHF silicon tuners and dual 6th generation VSB demodulators

-

MPEG Layer 1/Layer 2 audio decoding

-

XLR audio connector, Ethernet (RJ45) jack, headphone jack, ASI output (BNC), RS-232 and GP contacts

-

Front panel configuration and monitoring through full-color graphic OLED display

-

Compact size (5” x 1.75” x 8.5”)

web interface, users can easily select the DTV channel and audio program PIDs or map the IFB audio channels to the XLR outputs, internal speaker or headphones. Status information, such as RF signal level and quality, DTV signal lock, and audio levels, is available through the web interface and is updated in real-time on the front panel OLED display. The ProQ LLAM (low latency audio multiplexer) enables the ProQ system to offer both high bit efficiency and low latency in the encoding. When used as part of the ProQ digital IFB system, the ProQ LLAM makes it truly economical to implement an ATSC based IFB cueing system that has minimal impact on the ATSC transport stream payload, while also offering the low latency needed to be used in live event coverage. To keep the latency associated with the IFB system down to 80 ms requires using about 200 kbps of the transport stream. Unlike some digital IFB systems, the Nucomm ProQ LLAM multiplexes up to eight cueing channels within the system, which offers the ability to support up to eight ENG vehicles or remote locations simultaneously from the ProQ LLAM. In addition, multiple ProQ LLAM systems can be used together, providing the ability to support even more channels. Consider the alternatives for cost-effectively implementing a DTV IFB cueing system for your broadcast news operations and you’ll find the Nucomm ProQ system to offer an ideal set of features and capabilities. For more information about the Nucomm ProQ, please contact your local RF Extreme team representative. RF Extreme Sales

■

t.+1.877.732.5250

■

www.rfextreme.com

IP ENG and IFB Systems

•

Omni Directional Transmit Antennas ENG/OB Van Antennas

16

Features: • Provides 360° coverage • Vertical polarization standard; linear optional • 2 dB, 5 dB gain configurations; higher gain versions available • Rugged, lightweight design • Ideal for COFDM omni transmit applications

Omni directional transmit antennas are widely used in COFDM digital ENG/OB systems as supplemental antennas to the main transmit antenna such as the Nucomm Newsblaster. These antennas, available in linear polarization, often provide for quick short-range shots without the need for raising the main antenna mast. An omni antenna also provides for moving digital/COFDM shots (conditions permitting). Optional ENG van mounting brackets are available. Another popular use of the Omni antennas is on wireless camera systems. The Omni antennas are available in 2 dB or 5 dB gain configurations. Higher gain models are available upon request as a special order.

Newsblaster/Megablaster ENG/OB Van Antennas Features: • Single and multi-band: 2, 3, 6, 7, 13 and 14 GHz bands • Low profile, offset feed design • Single, dual and quad polarity, remote selectable • Rugged honeycomb/fiberglass design • Excellent front to back ratio and side lobe performance • Lightweight • Mounts directly to QuickSet QPT90 pan and tilt head • Solid state switching models available The Newsblaster or Megablaster ENG/OB Van Transmit Antenna Series is the finishing touch to a digital or analog ENG/OB van transmit system. These high gain antennas are available in singleand multiple-band configurations and with all popular polarization formats. Certain models are available with solid-state switching. For even higher gain requirements, the Megablaster is the perfect choice.

• Newsblaster - Single, dual and tri-band models - Gain: 20 dBi at 2 GHz, 30 dBi at 7 GHz, 34 dBi at 13 GHz - Reflector size: 21” H x 25” W, weight 27 lbs • Megablaster - Single and dual band models - Gain: 23 dBi at 2 GHz, 34 dBi at 7 GHz - Reflector size: 37.5” H x 54” W, weight 40 lbs

RF Extreme Sales

■

t.+1.877.732.5250

■

www.rfextreme.com

E N G / O B Tr a n s m i t A n t e n n a s

• Available in either the 2 or 7 GHz band

ChannelMaster TX7/RX7 Tri-Band Portable HD/SD Transmitter and Receiver

17

Features: • Lightweight-ideal for portable or airborne applications • Multiple modulation selectable: FM, COFDM, VSB, QAM, DVB-S • Available in single, dual or tri-band configurations • Frequency agile via preset channels or in 250 kHz step sizes (100 kHz internationally) • Remote control of all functions via RS-232 • Dynamic color bars with field programmable ID The ChannelMaster ushers in a new class of totally integrated, feature rich portable microwave transmitters. The ChannelMaster is available in single, dual or tri-band configurations, using frequency bands from 1.5-15.4 GHz. The ChannelMaster encoder features adjustable long GOP encoding including I P and B frames, improving video quality as well as offering a low delay mode. The encoder can be purchased as HD/SD or SD only. For increased flexibility a wide array of inputs are provided, including composite video/audio, SDI (with de-embedded audio), ASI and 70 MHz. The ASI input is ideal for use with an external MPEG2 encoder or to support digital repeater applications. Two audio inputs are standard, while four audio inputs are available. For FM operation, an internal SDI to composite converter is integrated, providing seamless operation between analog and digital modes. This

• Video inputs: composite video, SDI (HD), DVB-ASI • Audio inputs: two analog standard, four audio available; AES/EBU, de-embedded from SDI • Integral SDI to composite video converter for FM operation • Front panel LCD smart display for total control • Fifteen quick-store presets • Integrated universal AC/DC power supply

eliminates the need for an external converter when used in an SDI plant. This feature also de-embeds the audios if desired.

Newscaster DR2 Digital COFDM Diversity HD/SD Receiver Features: •

Dual or quad maximum ratio combining

•

COFDM DVB-T compliant for 6, 7, 8 MHz

•

Variable bandwidth COFDM - 5 to 16 MHz

•

Pre-select bandpass filters for high selectivity

•

Built-in HD/SD video/audio decoder

•

Dual ASI/video outputs

•

One ASI input

•

Built-in spectrum analyzer displayed on front panel

The Newscaster DR2 is a split box HD/SD COFDM diversity microwave receiver intended for outside broadcast and other mobile video applications. Its stylish rugged machined housing provides durability and excellent thermal characteristics for operation in the harshest of conditions.

•

Composite monitor output with spectrum OSD overlay

•

High adjacent channel selectivity >40 dB

•

Rugged, solid-metal construction

•

Available 1.99 to 2.7 and 6.4 to 7.1 GHz

The receiver has four RF inputs that communicate directly with the system's external Block Down Converter (BDC). The four inputs are maximum ratio combined to provide up to a four-input diversity receive signal. Currently two BDC models are available: 1.99 to 2.70 GHz and 6.40 to 7.10 GHz. Additional bands will be available in the future. The BDCs communicate to the Newscaster DR2 receiver in the 150 to 850 MHz frequency range. The use of external BDCs allows the receive antennas for the Newscaster DR2 to be remotely mounted far away from the microwave receiver.

•

Color TFT display

•

Ten quick-touch pre-set selections

•

User control via sensor wheel

•

Remote control with Ethernet or RS-232/RS-485

•

AC and DC operation

RF Extreme Sales

■

t.+1.877.732.5250

■

www.rfextreme.com

Digital Portable and Airborne Systems

• HD/SD MPEG2 encoding

ChannelMaster TX7s/RX7s HD/SD ENG/OB Two Box Portable Transmitter/Receiver

18

Features: • Separate RF Head and Control Unit (up to 600 meters) • Multiple modulation selectable: FM, COFDM, QAM, VSB • PAL and NTSC compatible-auto switches • Integrated universal AC/DC power supply • Remote control of all functions via RS-232 • Dynamic color bars with field programmable ID • HD/SD-MPEG2 encoding, supporting 4:3 and 16:9 aspect ratios The ChannelMaster TX7s/RX7s is available in single band 2, 7 or 13 GHz or dual band 2+7 GHz configurations. Other bands are available from 1.5-15.4 GHz. The ChannelMaster TX7s/RX7s includes an integrated HD/SD MPEG2 encoder/ decoder with COFDM, VSB and FM modulators.

• Video inputs: composite video, SDI, DVB-ASI

The TX Control Unit contains the HD/SD MPEG 2 encoder and COFDM modulator that has a low delay mode of less than 75 msec. For increased flexibility a wide array of inputs are provided, including Composite video/audio, SDI, HD-SDI, ASI and 70 MHz. The ASI input is ideal when using an external MPEG2 encoder or supporting digital repeaters. Two stereo audio inputs are standard.

• Fifteen quick-store hot button preset keys

For FM operation, an internal SDI to composite converter is integrated providing seamless operation between analog and digital modes. This eliminates the need for an external converter when used in an SDI plant. This feature also de-embeds the audios.

• Integral SDI to composite video converter for FM operation • Front panel LCD smart display for total control • Video presence detection and control • Simplex, duplex and dual channel operation • Intercom between Control Unit and RF Head

Options: • Single and multi-band antennas, duplexers and diplexers • Battery packs, rain shield, carrying cases and tripods

RF Extreme Sales

■

t.+1.877.732.5250

■

www.rfextreme.com

Digital Portable and Airborne Systems

• Available in single band, 2+7 GHz dual band or tri-band

Access RC Remote Control Unit Panel Mounted Control System for Nucomm Portable Radios

19

Applications:

Features: • Compact size • Five quick preset recall • Fifteen extended preset recall • Multi-band support The Nucomm Access RC is a fully functional remote control that will control both transmitters and receivers. It features one-touch control of main parameters such as hi/lo power, TX standby and test generator functions. In addition the Access RC features Nucomm’s popular one touch preset control of radio parameters for quick changes to the user’s standard configurations. The compact unit mounts into standard instrument panels making it simple to integrate.

• Fits standard instrument panel with “Zeus” type fasteners • Standard RS-232 serial connection • Simple rotary channel selection • Active TFT color LCD for simplified or detailed status • Color coded display for fast identification of parameters • Multi unit control capable • Common instrument panel intensity control input • USB connection for software upgrades with a USB Flash Drive

SkyLink™ C100 Airborne Control Head Features: • Complete airborne microwave control system • Five inch graphic display with touch screen • Avionics grade controller • Moving map • Interfaces to the following ancillary equipment: • Microwave radios • Power system control (+12 and +24 VDC) • Audio/video routers • Digital encoders/decoders The C100 is a panel-mounted control unit capable of directly controlling the SkyLink Antenna family of products as well as related ENG equipment. The C100’s user interface is a touchscreen enabled LCD display with a rotary encoder and shortcut keys. When using the C100, all system functions can be controlled and displayed together. More than one C100 can be installed if the user wants to control the system from multiple locations (such as pilot and operator).

the controller. The C100 provides “preset modes” which allow the system to automatically select a desired mode of operation with a single button.

The C100 can control all of the functions on microwave radios supplied by various vendors. Using the C100, the radios may be “remote mounted” — all radio functions are controlled directly from

The C100 integrates a moving map. Now the user can continuously monitor the aircraft’s position relative to the receive sites, major landmarks and the beam of the RF transmission.

RF Extreme Sales

■

t.+1.877.732.5250

■

www.rfextreme.com

Digital Portable and Airborne Systems

• Remote control of Nucomm’s ChannelMaster™ and Newscaster™ transmitter and receiver systems for airborne, mobile or portable applications

CamPac COFDM Wireless Camera Transmitter for 2 or 7 GHz Frequency Bands

20

Features: • 1.99/2.5 GHz; 2.3/2.7 GHz; 6.4/7.1 GHz • DVB-T compliant in all modes • 40 dB • Lightweight rugged construction • Available 1.99 to 2.7 GHz • Ten quick-touch pre-set selections • User control via sensor wheel • Remote control with Ethernet or RS-232/RS-485 • AC and DC operation RF Extreme Sales

■

t.+1.877.732.5250

■

www.rfextreme.com

Digital Portable and Airborne Systems

Available 1.99 to 2.5 GHz or 6.4 to 7.1 GHz

21

Digital RF high-power amplifier docking station with outputs to 10 watts. Based on Nucomm’s award winning wireless miniature COFDM transmitter, the GoPac2 system is a multi-functional transmitter with amplifier docking station that can be used for virtually any ENG application. The CamPac2 COFDM transmitter can be detached and used on a HD or SD camera or attached to the GoPac2 power amplifier docking station to be used on tripods, ENG vehicles or helicopters. The two units can be separated by up to 50 feet of RF cable.

•

NewsHub Cellular Diversity Receive Hub

22

Applications: • Ideal for hot swap link backup • HD/SD full format MPEG2 decoder

Features: • Expanded coverage by cascading additional NewsHubs • 4 Input ASI with loop thru packet switching • Extremely low acquisition time (40 dB

•

Rugged, solid-metal construction

•

Available 1.99 to 2.7 and 6.4 to 7.1 GHz

The receiver has four RF inputs that communicate directly with the system's external Block Down Converter (BDC). The four inputs are maximum ratio combined to provide up to a four-input diversity receive signal. Currently two BDC models are available: 1.99 to 2.70 GHz and 6.40 to 7.10 GHz. Additional bands will be available in the future. The BDCs communicate to the Newscaster DR2 receiver in the 150 to 850 MHz frequency range. The use of external BDCs allows the receive antennas for the Newscaster DR2 to be remotely mounted far away from the microwave receiver.

•

Color TFT display

•

Ten quick-touch pre-set selections

•

User control via sensor wheel

•

Remote control with Ethernet or RS-232/RS-485

•

AC and DC operation

RF Extreme Sales

■

t.+1.877.732.5250

■

www.rfextreme.com

Central Receivers

• DVB-T COFDM demodulator, auto detects COFDM modulation parameters including auto switching for 6, 7 and 8 MHz bandwidth

Newscoder RX7 HD/SD 70 MHz Demodulator/Decoder

29

Features: • FM analog demodulation-auto detects and corrects for 3 or 4 MHz modulation deviation • Auto detects all digital set-up parameters from TX • 6, 7 and 8 MHz: auto or manual detection • HD/SD MPEG2 decoding • Digital and analog modulation parameters front panel selectable by LCD display The Newscoder RX7 is a fully DVB-T compliant decoder/demodulator that is the “Broadcasters Best Choice” when upgrading any digital ready receiver to full digital capability. Whether it’s the Nucomm Newscaster CR6 or another manufacturer’s receiver, the broadcaster can now add COFDM, FM analog plus optional VSB modulation to any digital ready receiver. In addition to a third modulation scheme, the Newscoder RX7 incorporates a multitude of new features, including auto-detection of all digital transmit parameters, industry leading lock-up time as well as an optional integrated spectrum viewer output. While standard modulation includes COFDM and FM analog, a third modulation such as VSB, QAM or DVB-S can be added at a later date. DVB-T COFDM offers marginal performance for HDTV transmission when used in the 2 GHz band, especially when compared to 8VSB and QAM, which can offer higher data rates of 30 Mbps and beyond.

Newscaster DR1

• Up to three modulation formats available for higher data rates, including: VSB, QAM, DVB-S • Outputs: 1 composite video plus 4 analog audio or 2 AES/EBU; 1 SDI digital video with embedded audio; DVB-ASI from COFDM demodulator • Inputs: 70 MHz, DVB-ASI • Three user preset quick keys • AC power supply; optional universal AC/DC supply • Works with any digital-ready receiver • Fast lock-up/recovery time • Optional fully integrated spectrum viewer; works with all major control systems • PAL and NTSC with auto switch • RS-232 remote control and monitoring

Portable COFDM Diversity HD/SD Receiver Applications: • Central receiver or portable ENG receiver • Urban cellular receive • Sports/production coverage • Helicopter and UAV links

Features: • Dual or quad maximum ratio combining • COFDM DVB-T compliant for 6, 7, 8 MHz • Variable bandwidth COFDM: 5 to 16 MHz The Newscaster DR is a lightweight COFDM microwave receiver intended for portable and mobile video applications. Its stylish rugged machined housing provides durability and excellent thermal characteristics for operation in the harshest of conditions. The receiver can be configured with dual or quad diversity demodulators using maximal ratio combining, which significantly improves the robustness of higher data rate modulation. Greater data rates provide improved video quality. Spatial diversity increases system performance by digitally combining signals with different characteristics. This essentially fills in the gaps in the channel and provides improved path reliability. The built-in spectrum analyzer gives an instant analysis of the selected channel and can be used to minimize multipath or see if the channel is clear from interference.

• Pre-select bandpass filters for high selectivity • Built-in HD/SD video/audio decoder • Dual ASI/video outputs and one ASI input • Built-in spectrum analyzer displayed on front panel color TFT display • Composite monitor output with spectrum OSD overlay • High adjacent channel selectivity >40 dB • Lightweight rugged construction • Available 1.99 to 2.7 GHz • Ten quick-touch pre-set selections • User control via sensor wheel • Remote control with Ethernet or RS-232/RS-485 • AC and DC operation RF Extreme Sales

■

t.+1.877.732.5250

■

www.rfextreme.com

Central Receivers

• COFDM DVB-T compliant QPSK, 16QAM and 64QAM with automatic parameter detection

ProScan DR3 Cosecant Squared, Steerable Central Receive Antenna Systems

30

Features: • Lower windload than ProScan2 • Digital-ready for 7 GHz, standard • New optical encoders eliminate conventional potentiometer • 1.4 Meter cosecant squared reflector eliminates requirements for elevation travel in most applications • Quad polarization, (H, V, LCP, RCP) The ProScan DR3 is the highest gain ENG central receive antenna system currently available. The DR3 with its new three-piece radome design, offers lower windload than previous ProScan antenna systems while still offering the high gain that many ENG systems demand. The cosecant squared reflector design virtually eliminates requirements for elevation travel in many applications. The antenna incorporates a solid state switching feed, with high dynamic range LNA/filter and offers the latest PCS/MMDS filter protection. The ProScan DR3 is available in single, dual and triband configurations and covers 2/2.5, 6/7, 13 and 14/15 GHz bands with the appropriate block downconverter. The 7 GHz version comes standard with a digital-ready DRO for COFDM operation.

• Latest design solid state switching feed • Latest design high dynamic range LNA and filter • Latest PCS/MMDS filter protection • Ruggedized rotating mechanism, dual speed rotator • 24 dB gain LNA (2 GHz) with remote 24/12 dB gain reduction switching on LNA/block downconverter

The continuous rotation version includes slip rings and a RF rotary joint and is preferred for helicopter or fixed wing aircraft, auto tracking applications.

In addition to the 2 GHz features listed above, the ProScan DR3, can accommodate up to four switchable channel filters and bandpass filters as well as hard LNA bypass. Also incorporates a new high performance 7 GHz, RF chain for improved sensitivity and digital signal overload performance critical to today’s digital ENG operations. Product enhancements and innovations include new third order intercept point to help prevent over-saturation of receivers.

The ProScan DR3 antenna system is the perfect companion product to the Nucomm Newscaster CR7, Navigator Remote Control System or the Troll Systems TouchStar ENG Control System.

The ProScan is available in either non-continuous or continuous configurations. Continuous rotation is preferred for helicopter or fixed wing aircraft, auto tracking applications.

The ProScan DR3 is available in either non continuous or continuous rotation configurations.

Mounting Hole Pattern

Dimensions

RF Extreme Sales

■

t.+1.877.732.5250

■

www.rfextreme.com

Central Receive Antenna Systems

• New integrated three-piece radome design with access door

UltraScan DR2 Low Profile, Steerable Central Receive Antenna Systems

31

Features: • Low profile, low wind-loading

• Antenna gain, 20 dBi at 2 GHz, 30 dBi at 7 GHz, 34 dBi at 13 GHz • Single, dual and tri-band models available • 2/2.5, 6/7, 12/13, 14/15 GHz bands • New US 2 GHz, BAS relocation filter

The UltraScan DR2 is a highly ruggedized offset fed antenna enclosed in a low profile radome that minimizes space needs and wind loading. The feed is broadband covering the 2/2.5 GHz bands; a dual band model covers both the 2/2.5 GHz and 6.4/7 GHz bands.

• Selectable filters for operation at both the current and the new U.S. 2 GHz bands • 24 db gain LNA (2 GHz) with remote 24/12 db gain reduction switching on LNA • Optical encoders eliminate conventional potentiometers

The UltraScan antenna uses modern solid-state MMICs to perform RF switching in the feed, thus eliminating all electro-mechanical RF switches. To provide optimal performance, the UltraScan feed assembly includes low-noise amplifiers, solid state RF switches, RF band filter, and microstrip combiners and hybrids in an integrated RF assembly. LNA gain bypassing is provided as a standard feature to reduce receiver overloading under strong signal conditions.

adjacent to ENG central receive sites. The combination of a high dynamic range LNA and sharper filtering make the UltraScan a “bullet proof” solution to the problem of PCS interference.

In addition, the overall power requirements of the rotating system and feed assembly are lower than those of traditional systems, thereby reducing the size and weight of the interconnecting control cable. The feed design permits a full range of remote switching options with the LNA/ block downconverter mounted near the feed to minimize the loss occurred through cables.

For dual band operations, Nucomm offers an optional 7 GHz LNA/feed assembly that also uses solid-state MMIC switches and LNAs. The 7 GHz band output is fed to a frequency converter that converts the 7 GHz signal to an intermediate frequency in the 2 to 2.7 GHz range. An internal solid-state switch selects either the 2 GHz band or the converted 7 GHz band.

The UltraScan DR2 central receive antenna features a newly designed front-end, which consists of a solid state pin diodes switching unit. A new sharper response RF bandpass filter, and new high dynamic range LNA design are also employed. This design was initiated to combat the interference issues caused by PCS systems

The dual-speed rotator has been designed using proven technology for reliability, and is enclosed in a low-profile, aesthetically pleasing radome. Lightning and surge suppression is provided within the unit. The rotator and enclosure are constructed of aluminum and stainless steel, thus eliminating the possibility of corrosion.

• Quad polarization (H, V, LCP, RCP)

Dimensions

Mounting Hole Pattern

RF Extreme Sales

■

t.+1.877.732.5250

■

www.rfextreme.com

Central Receive Antenna Systems

• Capable of both analog and COFDM digital operation

Ellipse DR2 Steerable Central Receive Antenna System with Pan and Tilt

32

Features: • Dual axis pan and tilt control • Compact integrated radome • Continuous rotation option • Single, dual, or tri-band options • Quad polarization (H, V, LCP, RCP) • RFI and DC surge protection • Advanced solid-state switching The Ellipse DR2 antenna system offers both pan and tilt control, providing a high degree of pointing accuracy to optimize system performance. The antenna system is available in single, dual and triband configurations. The antenna incorporates a solid state switching feed with a high dynamic range LNA. The 2 GHz version offers the latest PCS/MMDS filter protection. A choice of 6/7, 12/13, 14/15 block downconverters to 2 GHz is provided. The 7 GHz model comes standard with a digital-ready DRO for COFDM digital operation. The Ellipse antenna is available in either non-continuous or continuous rotation configurations. The continuous rotation version includes slip rings and a RF rotary joint and is preferred for helicopter or fixed wing aircraft, auto tracking applications. For environmental protection, a two-piece, lightweight fiberglass radome with access

• 2 GHz model includes high dynamic range low-noise amplifier (LNA) • 2 GHz gain reduction 24/14 dB select • Latest design 2 GHz PCS/MMDS reject filter • 7 and 13 GHz models include block downconverter to 2 GHz • 7 GHz digital-ready, standard door has been included in the system design. The Ellipse DR2 antenna system is the perfect companion product to the Nucomm Newscaster CR7, Navigator Remote Control System or the Troll Systems TouchStar ENG Control System.

Digital-Ready Upgrade Kit 2 and 7 GHz Central Receive System Features: • Upgrade existing 2 & 7 GHz central receive antenna systems to digital-ready • High dynamic range 2/2.5 GHz 24/14 dB LNA • Provides the required frequency accuracy for digital signals utilizing COFDM technology • Phase-locked DRO design • High stability • Low phase noise • Latest PCS/MMDS reject filter Depending on model and date manufactured current steerable antenna feeds may not be suitable for digital reception and will require replacement under the 2 GHz BAS relocation. The Digital-Ready Upgrade is a direct feed replacement for your existing antenna. This feed upgrade offers a dipole, high dynamic range LNA, quad polarity switching and a BAS filter. Current block converters normally use an oscillator and microwave mixer in their design. With normal analog FM signals, a frequency stability of 1 MHz was adequate. With digital transmissions, both the stability and frequency accuracy must be improved by an order of magnitude, and the phase noise must be decreased and controlled. Most digital modems have a capture range of 100 kHz, and require phase noise in the order of -95 dBc at 10 kHz offset. The exact

• Latest solid state switching

requirement is dictated by the modulation type employed and the loop bandwidth of the modem design. The system's upgrade option employs a “phase locked” low-noise converter that meets this criteria. Older antennas will also require a high dynamic range LNA to prevent signal compression. Unlike analog FM transmission which contains no amplitude component, digital signal does contain an amplitude component that must pass linearly through the receive system to prevent digital errors. The Digital-Ready Upgrade is available for dual-band 2/7 GHz antenna systems as a factory upgrade, or can be purchased as part of a new replacement feed for an existing antenna. Consult Nucomm for a recommended upgrade.

RF Extreme Sales

■

t.+1.877.732.5250

■

www.rfextreme.com

Central Receive Antenna Systems

• New digital optical encoders eliminate conventional potentiometers

Flat Panel Sector Scan 90/120/180° Sector ENG Receive Antenna Systems

33

Features: • Available in 2, 7 and 13 GHz bands • Gains from 10 to 16 dBi depending on antenna parameters • Flat panel, lightweight and rugged design • Low wind loading • Easily installed • Advanced solid-state switching • Standard mount 2.5-4.5 in diameter • Switchable 2+7 GHz LNA The flat panel antenna can be purchased as a stand alone antenna to cover a specific coverage area, or can be combined with up to four sectors providing a complete and or overlapping 360° system. Complete sector systems are configured according to each customer location, application and system configuration. Please consult Nucomm with specific requirements for system design assistance.

• Capable of both analog and COFDM digital operation • 7 GHz models have new, high performance RF chain

Options: • 15° downtilt kit available • Local and full remote control systems available • LNA, block downconverter, digital DRO, BAS relocation filter available

Quad Sector Sectorized Central Receive Antenna System Features: • Sectorized Central Receive antenna system • Four switchable 90° sector arrays within a single radome • Easily deployed as a temporary or permanent installation • Non-steerable design eliminates the need for a pan and tilt unit • High gain/lightweight design • Highly reliable PCB mounted RF switches • Low noise amplifier (LNA) and PCS/MMDS filter in a separate weatherproof enclosure • Remotely controllable via antenna control system The Quad Sector Antenna represents a new design approach to ENG central receive antenna systems. This 2 GHz antenna will provide 360° coverage at a much higher gain level than a traditional omni and at a fraction of the cost of a sector or steerable receive antenna system. The antenna sectors can be switched locally or via an optional remote control system.

RF Extreme Sales

■

t.+1.877.732.5250

■

www.rfextreme.com

Central Receive Antenna Systems

• Single, dual and tri-band systems

Omni Pole Directional Receive Antennas Omni Directional ENG Receive Antenna

34

Features: • Provides 360° coverage • Vertical polarization standard • Available in 8 or 11 dBi gain versions • Lightweight, low wind load • No switching or control system required • No moving parts • Mounting hardware included • Capable of both analog and COFDM digital operation

7 GHz The Omni Pole Antenna is ideally suited where a low cost, low maintenance receive system is 2 GHz desired as a main receive site or as an auxiliary site. The Omni Pole performs best where frequency congestion is at a minimum and short to mid range distance ENG shots are satisfactory. The antenna can be supplied stand alone or with an optional LNA, BAS relocation filter or block downconverter in a separate weather proof enclosure.

• 7 GHz models have new, high performance RF chain

Options: • LNA and BAS relocation filter available in a separate weather proof enclosure • 7-2 GHz block downconverter with digital DRO available

RF Extreme Sales

■

t.+1.877.732.5250

■

www.rfextreme.com

Central Receive Antenna Systems

• Available in either the 2 GHz or 7 GHz band

Digi-BDC Digital Block Downconverter

35

Features: • Single, dual and tri-band configurations • Upgrade existing central receive antenna systems to digital-ready • Specifically designed to pass COFDM modulation • Ultra low noise, crystal stabilized, phase-locked DRO • Stability better than 5 PPM over extreme temperature range

Nucomm’s high performance Digi-DBC, (Digital Block Downconverter) is designed specifically for digital ENG/OB central receive antenna systems. The Digi-BDC is designed to pass COFDM and meet the stringent requirements of frequency stability, phase noise, microphonics and temperature. Many existing antenna systems contain block downconverters designed for analog operation which do not meet the frequency stability and phase noise requirements of digital systems employing COFDM modulation.

RF Extreme Sales

■

t.+1.877.732.5250

■

www.rfextreme.com

Central Receive Accessories

• 7 and 13 GHz, other bands available upon request

Navigator2 Control System Navigator ENG Remote Control System

36

Features: • Controls up to four sites

• Serial or parallel control of central receiver • Integrated latitude and longitude calculator provides go-to antenna control • Spectrum viewer display • Comprehensive monitoring functions of central receiver and IRD The Navigator2 has evolved from Nucomm's Navigator 1 series control system with enhanced capabilities designed to overcome the difficulties associated with tuning in a digital ENG link. The NAV2 displays valuable color coded monitoring functions of Nucomm's CR7 Central receiver, including: • • • • •

Received signal level (RSL) Pre-Viterbi bit error rate (BER) Post-Viterbi BER Modulation error ratio (MER) Link quality meter

Color coding allows for quick recognition of acceptable meter levels without interpretation of the numeric value. Additionally, the NAV2 will display Nucomm's innovative 813 MHz (first IF) Spectrum Viewer. This allows the user to view the unfiltered 1st IF spectrum

• GPS based auto-tracking for airborne and dynamic ENG shots including adjacent channels. The Spectrum Viewer, coupled with the advanced monitoring capabilities, allow for tuning in analog and digital ENG shots with the highest degree of confidence. The Navigator2 allows for control of up to four receive sites all with one easy to use graphical user interface (GUI). The local control unit (LCU) can also be upgraded to handle a second steerable or non-steerable antenna system with an additional Newscaster CR7 central receiver. The Navigator2 system includes Windows based master control software to be used with an existing PC (PC not included), a local control unit (one per site) as well as two two-wire dial up modems and serial control.

TouchStar™ Master Control System Features: • PC based master control unit • 17” LCD touchscreen monitor • Intuitive graphical user interface • Map interface (optional—US only) • Multi-site control and monitoring capability, controlling as many antenna/camera sites per system as desired • On screen real-time video with external 10 x 1 video switcher option The Advanced Capability Master Control System is for users looking for a system that can expand and grow as their operation grows. The system offers advanced features found only in top of the line, high capability, remote control systems. The master control unit, LCD monitor and local control unit are ideal where a rack mounted system is desired. The intuitive interface allows for fast and easy operation of the system by novice users, and concurrent monitoring of up to six remote sites on a single screen, this allows even the busiest users to manage the incoming signals with enhanced efficiency. For even greater capability, the multiple networked-masters option allows two or more master controllers to be networked together so that any of the masters can control any of the sites.

• Auto tracking system using Navtrack equipped transmitter equipment • Controls antenna and or camera sites • RS-232, RS-422, two wire, dial-up, four wire and master/remote communications lines • Multiple networked master option • Advanced capability local control unit - Complete central receiver control/status - Combination of two antennas and/or cameras or one of each per local control unit • Displays the Spectrum Viewer output of CR7 Central Receiver • Displays link quality parameters including, MER, pre/post Viterbi and RCL RF Extreme Sales

■

t.+1.877.732.5250

■

www.rfextreme.com

Master Control Systems

• Two slave per site expansion kit for second antenna and Newscaster CR7

RF Central Because Every Shot Counts

37

Founded in 2004 by Jeff Winemiller and partners, RF Central has quickly emerged as one of the top broadcast engineering services companies in the world by providing fixed and portable microwave links and engineering services. RF Central offers complete wireless solutions to its customers with an unmatched product warranty and complete commitment to technical support with our exclusive RF ExtremeCare service. RF Central’s products are designed for maximum performance, reliability, and functionality. Our clients find them easy to set up, easy to transport, and easy to use. RF Central’s research and development guarantees that their product line remains cutting-edge.

RF Central’s team is experienced, courteous and dedicated to serving the digital microwave community. From our engineers to our service technicians, administrative staff and sales representatives, RF Central’s team is prepared to provide you with reliable, high performance equipment and unsurpassed service and support. Our team welcomes you to visit us at our equipment showroom and manufacturing facility, meet us at an upcoming trade show, conference or visit our web site at www.rfcentral.com.

As a premier supplier of ENG equipment, RF Central has proven themselves innovative and responsive to the market. Their success is founded in understanding our customers’ requirements, and providing outstanding quality products and services to meet them. As a member of the Vitec Group of companies, RF Central is able to leverage Vitec’s substantial worldwide presence, experience and other strengths to build an even stronger company, dedicated to serving our customers at the highest level with High Definition solutions in a wireless world.

RF Central 99 Garden Parkway Carlisle, PA 17013 T. 717.249.4900 www.rfcentral.com

© Copyright 2009 Vitec Group. All rights reserved. ™RF Central is a trademark of the Vitec Group plc.

RF Extreme Sales

■

t.+1.877.732.5250

■

www.rfextreme.com

About RF Central

RF Central is world renowned for its technical expertise in microwave communications.

RFX-PHT Portable High Power Transmitter

38

Features: •

Transmitter power: Adjustable to 5 watts

•

Encoding options:

•

Power:

-

MPEG 2: 4:2:0/4:2:2 (DVB standard) 12VDC (12 Amps) 110VAC Power Supply available

Designed to utilize the RFX-CMT, the RFX-PHT portable 2 GHz digital transmitter comes with 5 Watt power output standard (Other output levels are available), and the RFX-PHT-H is available with 7 Watt output. It provides a means to make any “news car” into a “live car”. “Run and shoot” vehicles now become “run and transmit” The PHT can also be used in a standalone mode for temporary transmit application. Options for the PHT are a Car Mounting Kit and Antenna. RF Central warranties the PHT for 3 Years.

RFX-PHT-II HD Upgradeable Portable High Power Transmitter Features: •

Transmitter power: -

•

Encoding options: -

•

Adjustable to 5 Watts MPEG 2: 4:2:0/4:2:2 (DVB standard)

Power: -

12VDC (12 Amps) 110VAC Power Supply available

Designed to utilize the RFX-CMT-II, the RFX-PHT-II HD Upgradeable portable 2 GHz digital transmitter comes with 5 Watt power output standard (Other output levels are available), and the RFX-PHT-H is available with 7 Watt output. It provides a means to make any “news car” into a “live car”. “Run and shoot” vehicles now become “run and transmit” The PHT-II can also be used in a standalone mode for temporary transmit application. Options for the PHT-II are a Car Mounting Kit and Antenna. RF Central warranties the PHT-II for 3 Years.

RF Extreme Sales

■

t.+1.877.732.5250

■

www.rfextreme.com

Tr a n s m i t t e r s

-

RFX-CMT Camera Mount Transmitter

39

Features: •

Transmitter power: 100mW

•

Frequency Band:

•

Power:

-

1.990 - 2.500 GHz, 5.8 GHz, 6.4 GHz, and 7 GHz Available with interface plates to suit Anton Bauer, IDX,PAG and other batteries (to be specified at time of order) or 11-16 VDC (18W) via standard 4-pin XLR socket interface plate.

The RFX-CMT is designed for ENG, and applications, where camera crews can transmit audio and video to a local receiver. The CMT allows the photographer to go where cables do not allow access. The CMT clips onto the camera’s battery adapter plate between the battery and the camera. The addition of the CMT to an ENG camera transforms it to a digital wireless camera. The CMT transmitter operates in the 2 GHz band. RF Central warranties the CMT for 3 Years.

RFX-CMT-II HD Upgradeable Camera Mount Transmitter Features: •

Transmitter power: -

•

Power: -

•

100 mW Available with interface plates to suit Anton Bauer, IDX,PAG and other batteries (to be specified at time of order) or 10-35 VDC (18W) via 4-pin Lemo socket.

Frequency band: -

1.3 to 4.5 GHz (in bands)

With the input of an HD, SDI, or ASI signal, the RFX-CMT-II transmits a highly robust signal with ultra low delay. This high performance transmitter is an excellent choice for live news and live sporting events. The CMT-II is standard SD but is upgradeable to Full High Definition (HD) capability.

RF Extreme Sales

■

t.+1.877.732.5250

■

www.rfextreme.com

Tr a n s m i t t e r s

-

RFX-RMT Digital/Analog Rack Mount Transmitter

40

Features: •

Transmitter power: 500 mW (7 W with RFX-RMAC or RFX-MMPA)

•

Frequency:

•

Encoding options:

-

1.990 - 2.500 GHz MPEG 2: 4:2:0/4:2:2 (DVB standard)

The RFX-RMT is a state of the art 2 GHz analog / digital transmitter featuring exceptional performance for ENG trucks and fixed link applications. The RMT also features a built-in COFDM encoder. Demodulation modes include QPSK,16 QAM, 64 QAM (Auto). Another feature is “thumbwheel” channel selection. RF Central warranties the RMT for 3 Years.

RFX-RMT-II HD Upgradeable Rack Mount Transmitter Features: •

Transmitter power: -

•

Frequency: -

•

500 mW (7 W with RFX-RMAC or RFX-MMPA-II) 1.990 - 2.500 GHz

Encoding options: -

MPEG 2: 4:2:0/4:2:2 (DVB standard)

The RFX-RMT-II from RF Central is a state of the art digital COFDM transmitter offering exceptional performance for ENG truck and fixed link applications. The RFX-RMT-II features SDI, HD, DVB-ASI or Composite inputs. This unit is offered in SD only or SD/HD configuration.

RF Extreme Sales

■

t.+1.877.732.5250

■

www.rfextreme.com

Tr a n s m i t t e r s

-

RFX-ENG Electronic News Gathering Package

41

Features: •

Transmitter power: Adjustable to 7 watts

•

Encoding options:

•

Frequency band:

-

Tr a n s m i t t e r s

-

MPEG 2: 4:2:0/4:2:2 (DVB standard) 1.990 - 2.500 GHz

The RFX-ENG package is a state of art analog and digital transmitter offering exceptional performance in ENG trucks with true 7 Watt COFDM transmit powers in all modes, QPSK, 16 QAM and 64 QAM. RF Central warranties the ENG system for 3 Years. The package consists of a RFX-MMPA, a RFX-RMTC and a RFX-RMT.

RFX-ENG-II HD Upgradeable Electronic News Gathering Package Features: •

Transmitter power: -

•

Encoding options: -

•

500 mW (7W at 2 GHz with RFX-MMPA-II) MPEG 2: 4:2:0/4:2:2 (DVB standard)

Frequency band: -

2.0 GHz

The RFX-ENG-II is a state of art 2 GHz digital COFDM complete transmission package. Offering exceptional performance in ENG trucks with true 7 Watt COFDM transmit powers in all modes. The RFX-ENG-II is available in both SD only and SD/HD formats. RF Central warranties the ENG system for 3 Years. The package consists of a RFX-MMPA-II, a RFX-RMTC-II and a RFX-RMT-II.

RF Extreme Sales

■

t.+1.877.732.5250

■

www.rfextreme.com

RFX-ENG-II Dual Band HD Upgradeable Electronic News Gathering Package

42

Features: •

Transmitter power:

•

Encoding options: -

•

500 mW (7W at 2 GHz: 1W at 7 GHz with RFX-MMPA-II Dual Band) MPEG-2: 4:2:0/4:2:2 (DVB standard)

Frequency band: -

2.0 GHz AND 7.0 GHz

The RFX-ENG-II Dual Band is a state of art 2 GHz and 7 GHz digital COFDM complete transmission package. Offering exceptional performance in ENG trucks with true 7 Watt COFDM transmit powers in 2 GHz and 1 Watt in 7 GHz mode. The RFX-ENG-II Dual Band is available in both SD only and SD/HD formats. The package consists of a RFX-MMPA-II Dual Band, a RFXRMTC-II Dual Band and a RFX-RMT-II Dual Band.

RFX-NLL-II 5.8 GHz Digital Microwave link Features: •

Frequency Band: -

5.8 GHz license free

•

Affordable digital transmitter and receiver package.

•

Automatic channel select (multiple useable channels).

The RFX-NLL-II is a state of the art 5.8 GHz Digital Microwave link. The NLL-II’s transmitter is designed to mount between a ENG camera and the battery. The receiver is designed to be mounted on a tripod, or other suitable location. Applications include sports arenas, roof top to roof top, and camera to ENG truck.

RF Extreme Sales

■

t.+1.877.732.5250

■

www.rfextreme.com

Tr a n s m i t t e r s

-

RFX-BRK COFDM 4:2:0 100mW Miniature Digital Transmitter

43

Features: •

Transmitter power: 100 mW nominal

•

Encoding options:

•

Frequency band:

-

Tr a n s m i t t e r s

-

MPEG 2: 4:2:0 1.990 - 2.500 GHz

The RFX-BRK from RF Central is a state of the art miniature digital transmitter providing 4:2:0 video and 100 mW of power.

RFX-PDT Portable Digital Transmitter Features: •

Transmitter power: -

•

Encoding options: -

•

500mW (others available) MPEG 2: 4:2:0/4:2:2 high quality video (DVB standard)

Power: -

11-35VDC (33W at 12VDC)

The RFX-PDT from RF Central is a state of the art compact digital transmitter for use in harsh RF environments, where size and weight combined with broadcast performance is important.

RF Extreme Sales

■

t.+1.877.732.5250

■

www.rfextreme.com

RFX-GL 2 to 23 GHz Fixed Links

44

Features: •

Transmitter power: 1 Watt (up to 5 Watt maximum, dependent on band)

•

Encoding options:

•

Frequency band:

-

MPEG 2 4:2:0 (with optional encoder mux board) 2-23 GHz

The RFX-GL Fixed Link family of radios from RF Central are excellent solutions for STL,TSL, and ICR applications. The versatile modular platform offers th use of different boards allowing these units to accept analog video, E3, E1 (4x), ASI, or SDI inputs with the option of mixing those signals together over a single link.

RF Extreme Sales

■

t.+1.877.732.5250

■

www.rfextreme.com

Tr a n s m i t t e r s

-

RFX-RMR Digital/Analog Rack Mount Receiver

45

Features: •

Receiver input:

•

Decoding options: -

•

Analog or digital signal, auto detects COFDM modulation parameters MPEG 2: 4:2:0/4:2:2 (DVB standard) (Auto)

Frequency band:-

1.99 - 2.5 GHz

The RFX-RMR is a state of the art analog / digital receiver featuring exceptional performance for central receive sites and fixed link applications. The RMR features a “built-in” COFDM decoder. Demodulation modes include QPSK, 16 QAM, 64 QAM (Auto). Another feature is “thumbwheel” channel selection. RF Central warranties the RMR for 3 Years.

RFX-RMR-II HD Upgradeable Rack Mount Receiver Features: •

Receiver Input: -

•

Decoding Options: -

•

HD/SD, auto detects COFDM modulation parameters MPEG 2: 4:2:0/4:2:2 (DVB standard) (auto)

Frequency Band: -

1.99 - 2.5 GHz

-

(others available)

The RFX-RMR-II receives both standard and high definition signals and outputs composite video, SDI (HD), or DVB-ASI. Featuring an array of audio capability, including analog, digital and fully embedded audio outputs, the RMR-II is designed to provide exceptional performance for central receive sites, ENG and fixed link applications. Demodulation modes include QPSK, 16 QAM, and 64 QAM with auto detection. While presently available in the 2GHz and 5.8GHz frequency bands, additional frequencies are available upon request. The unit comes in factory default SD, but is upgradeable to Full HD. Additional charge applies for HD upgrade.

RF Extreme Sales

■

t.+1.877.732.5250

■

www.rfextreme.com

Receivers

-

RFX-PRX-II Portable Handheld Receiver

46

Features: •

Frequency band: 2.0 - 5.8 GHz (others available)

•

Demodulation modes:

•

Guard interval:

-

Receivers

-

QPSK, 16QAM, 64QAM

1/4, 1/8, 1/16, 1/32

•

The RFX-PRX-II is a compact and rugged digital receiver with exceptional performance for portable or handheld applications. Simple to use and suitable for multiple applications ranging from security surveillance to ENG confidence monitoring.

Power: -

5V DC Lithium Plymer Rechargeable Battery or external power; DC supply

-

Replaceable battery

RFX-PMR Portable Digital Receiver Features: •

Decoding options: -

•

Receiver input: -

•

MPEG 2: 4:2:0/4:2:2 (DVB standard) (Auto) Digital COFDM, Auto detects modulation parameters

Frequency band: -

1.99 - 2.5 GHz

The RFX-PMR from RF Central is a state of the art portable digital receiver offering exceptional performance for portable and fixed link applications.

RF Extreme Sales

■

t.+1.877.732.5250

■

www.rfextreme.com

RFX-PMR-II HD Upgradeable Portable Digital Receiver

47

Features: •

Decoding Options: MPEG 2: 4:2:0/4:2:2 (DVB standard) (Auto)

•

Receiver Input:

•

Frequency Band:

-

Digital COFDM, Auto detects modulation parameters 1.99 - 2.5 GHz (others available)

The RFX-PMR-II from RF Central is a state of the art digital COFDM receiver for portable and fixed link applications. This rugged unit is tripod mountable, weather resistant and offered in SD only or SD/HD Configuration.

RFX-RMR-X6 6-Way Diversity Receiver Features: •

Receiver Input: COFDM MPEG2

•

Outputs: Composite, SDI or ASI

•

Demodulation: 6, 7 or 8 MHz COFDM (2k carrier) Auto-select modulation, FEC and guard interval

A state of the art COFDM diversity receiver with an LCD touch panel interface and built in bar graph and graphic spectrum display. This receiver offers up to six antenna inputs and uses maximum ratio combining (MRC) to pull together the output of all the antennas for extremely efficient superior performance.

RF Extreme Sales

■

t.+1.877.732.5250

■

www.rfextreme.com

Receivers

-

RMR-X6-II HD Capable 6-Way Diversity Receiver

48

Features: •

Receiver Input: 6 RF Inputs; 50 to 850 MHz (BNC)

•

Outputs:

•

Demodulation:

-

Receivers

-

ASIx2, RS-232, OSD CVBS, Ethernet DVB-T

RF Central's HD Capable COFDM 6-Way Diversity Receiver is a compact unit with on screen display of spectral data and graphic spectrum display. This receiver offers up to six antenna inputs and uses fast furious transforms-maximum ratio combining (FFT-MRC) to pull together the output of all the antennas for extremely efficient, superior performance.

RMR-X6-II-D HD Capable 6-Way Diversity Receiver with HD Decoder Features: •

Receiver Input: -

•

6 RF Inputs; 50 to 850 MHz (BNC)

Outputs: -

ASIx2, RS-232, OSD CVBS, Ethernet

•

Demodulation:

•

With HD decoder

-

DVB-T

RF Central's HD Capable COFDM 6-Way Diversity Receiver is a compact unit with on screen display of spectral data and graphic spectrum display. This receiver offers up to six antenna inputs and uses fast furious transforms-maximum ratio combining (FFT-MRC) to pull together the output of all the antennas for extremely efficient, superior performance.

RF Extreme Sales

■

t.+1.877.732.5250

■

www.rfextreme.com

RFX-MDR-PC Micro-Digital 2 GHz Receiver

49

Features: •

Frequency: 2.0-2.5 GHz

•

Interface:

•

Demod Modes:

-

USB 2.0 (No external power source required) COFDM QPSK

The RFX-MDR-PC from RF Central is a rugged, lightweight, and compact 2 GHz receiver that plugs directly into any computer’s USB 2.0 port. Quick and simple to use, this receiver is suitable for multiple applications, and ideal for in field confidence monitoring.

RFX-GL 23 GHz Fixed Link Features: •

Transmitter power: 1 Watt (up to 5 Watt Maximum Dependent on Band)

•

Encoding Options: MPEG 2 4:2:0 (with optional encoder mux board)

•

Frequency Band: 2-23 GHz

The RFX-GL Fixed Link family of radios from RF Central are excellent solutions for STL,TSL, and ICR applications. The versatile modular platform offers th use of different boards allowing these units to accept analog video, E3, Ei (4x), ASI, or SDI inputs with the option of mixing those signals together over a single link.

RF Extreme Sales

■

t.+1.877.732.5250

■

www.rfextreme.com

Receivers

-

RFX-MMPA Mast Mount Digital/Analog Microwave Amplifier

50

Features: COFDM Power (min): 37 dBm with 30 dBc skirts

•

Frequency Band: 1.990 - 2.500 GHz

•

DC Input Current: ~ 9.0 Amperes

•

DC Input Voltage: + 12 Volts

Amplifiers

•

The RFX-MMPA is designed for ENG applications where high quality digital microwave video transmission is required. Ideal for mast mount applications, the unit offers many standard features including a weather resistant, rugged housing with an internal heat sink. Also included are gain control circuitry and power monitoring. In outdoor use, it can be run continuously across its ambient operating temperature range without the need for active cooling. Proprietary linearization technology allows for unmatched COFDM performance where size and DC power consumption matter.

RF Extreme Sales

■

t.+1.877.732.5250

■

www.rfextreme.com

RFX-SMS BAS Spectrum Monitor

51

Features: RF Input: 1.990 to 2.110 GHz

•

Benefits: Low cost and Easy to install

•

Remote Control: Uses low data rate telephone, network or internet

The SMS allows for continuous frequency viewing from 1.990-2.110 GHz, and does not constrict the operator to a specified IF frequency. The SMS could be used for alignment of antennas, removing inherent problems associated with using built-in signal meters on receivers.

RFX-MCF Microwave Channel Filter Features: •

Frequency band: 1.90 – 2.70 GHz

•

Bandwidth: 10 MHz for digital

•

Tuning: Tunable

Filter is a 5 Pole, 50 Ohm, aperture coupled device and is primarily used to keep adjacent channels out of the receivers tuned band. Specifically used when there is a high saturation of RF.

RF Extreme Sales

■

t.+1.877.732.5250

■

www.rfextreme.com

Accessories

•

HD ExtremeCam HD-Cam Transmitter

52

Features: Camera: 1/3 type HD single chip sensor, 16:9

•

Lens: 10x optical zoom plus 0.5 converter; horizon stabilized by gravity sensor

•

Encoding: 1080i, 16:9 HD MPEG-2

•

Frequency bands: 1.5 to 5 GHz

•

The Point-Of-View (P.O.V.) HD ExtremeCam is a complete “on board” HD camera, video link transmitter and remote control data receiver in a fully weatherproof housing, ideal for use in multiple applications, vehicles, fixed and marine. The camera features full HD 16:9 1080i resolution and in addition to pan/tilt remote control, the lens is fully stabilized against roll movement. The built-in video link transmitter includes an MPEG2 HD encoder, COFDM modulator, power amplifier and antenna. The unit may be controlled by the pan/tilt controller or via laptop PC with the ExtremeCam Software Package.

Transmit power: 100mW

•

Modulation: COFDM 8 MHz 2K (6,7 MHz available)

•

Modulation modes: QPSK, 16QAM, 64QAM

•

Antenna: Built-in patch

•

Remote camera control: Pan/tilt, focus, zoom, iris/gain; adjustment red/blue; auto white balance/exposure

•

Camera control data link: Built-in narrow band UHF data receiver; remote addressed for multi-camera control from single TX

•

Size: 7.48” H x 6.69” Dia. (190 mm H x 170 Dia.)

•

Weight: 4.2 to 4.85 lbs. (1.9 to 2.2 kg), dependent on battery

•

Input: DVB ASI transport stream for SD or HD video, 188/204

•

Decoding options: MPEG-2 4:2:0/4:2:2 (DVB Standard)

RFX-HD-D HD Decoder

The RF Central RFX-HD-D is a high quality stand alone decoder for SD/HD MPEG2 digital video. The HD-D accepts an ASI input and outputs CVBS (NTSC or PAL), SD SDI, HD SDI or Analog Component Y/C formats dependent on the originating video source. The HD-D boasts additional capabilities including a comprehensive LCD display with full menu control of all vital parameters. The HDD contains an array of digital and analog audio outputs including AES3, SDI embedded, and up to 4 analog audio outputs via the rear panel. This decoder may be specified at the time of order to deliver Super Low Delay of as little as 1 frame of latency when utilized with a corresponding RF Central RFX CMT-II or RMT-II Transmitter. The unit is 1RU in packaging and is powered from 110/230 VAC. The HD-D may also be used as an add-on box to

•

Video formats: 1080i, 720p, 480i (NTSC), 576i (PAL)

•

Video outputs: -

SDI HD SMPTE-292M (299M)

-

SDI SD SMPTE-259M (272M)

-

Composite (PAL/NTSC), Y/C component

•

Latency: dependent on the associated transmitter encoder

•

Genlock: includes offset timing adjustment

•

Audio outputs: -

Digital: 2 x AES3 outputs / SDI embedded

-

Analog: 2 x stereo / 4 x mono outputs

•

Power supply:-110/230 VAC

•

Physical:-13 lbs. (5.9 kg); 1 RU

decode HD wireless camera transmitters using an SD capable digital receiver with an ASI output.

RF Extreme Sales

■

t.+1.877.732.5250

■

www.rfextreme.com

Accessories

•