Welcome to a new dimension: DYCS Brieda Cabins

A new generation of ergonomically-designed Crane Cab Operator interface devices This is the control station which provides an effective scientifically-tested answer to the persistent crane operator lower back stress and pain. With the new and innovative function of the joystick, the forearm is completely supported. The Brieda Dynamic Project is in accordance with the European Standard: EN 1005-3/4/5 • Human Physical Performance • Risk assessment for repetitive handling high frequency • Evaluation of work postures and movements The OCRA Index Metod • Occupational Risk Assessment on the overload of the upper limbs • Method also used in the International Standards ISO 11228-3

4

5

Electric Adjustable Boxes The universal floor attachment point makes installing or retrofitting the Brieda DYCS possible in every type of operators cab. The adjustment of the control boxes is performed by an electric device for all the required directions. The DYCS utilizes an extremely strong structure with a shock-absorbing system, tested for over 5000 hours under stress conditions.

6

7

Highly ergonomic-designed push buttons side panel with electric adjustable monitor support This design reduces overall stress, including, as a consequence, reduction of the lower back lumbar load. Lumbar stress has always been one of the main causes of strain, loss of productivity and development of functional muscular disorders associated with crane operation. Now this problem has finally been properly addressed.

Brieda Smart Bar Modular boxes for spreader lighting and analogic indicator

8

• Roof gutter for water draingage • Split type air conditioner • Shock absorbing device • Tip-up seat • Smart Bar light box • Brieda adjustable touch screen support • Brieda DYNAMIC control station

9

The joystick is activated with the simple use of the fingers. The highly ergonomic position of all the controls enables the crane operator to monitor the work in the best possible way, considerably contributing to the overall performance and productivity. It will soon be possible to record with a memory card the work position of various operators.

10

11

LSCT La Spezia

Container Terminal Italy

The “Dynamic Project Team Brieda”, in cooperation with the Biomedical Technology Department of the University of Milan and the EPM (Research Unit-Ergonomics of the body Posture and Movement) have developed the biomechanical studies of the operator on the control station, taking measurements with sensors, positioned on the muscles under stress, during the various work operations. This has led to a new design of the various controls and supports, reducing over 60% of the muscular stress, in particular in the lumbar area.

Less fatigue and stress provide better working efficiency and accuracy. The reduction of working stress and operator comfort have been studied and documented by a special task force of the Brieda Cabins company, combining technical measurements, medical reports and live footage of actual crane operations to provide the most comprehensive study of crane operator stress ever attempted.

12

Analyzing method. We have used the OCRA Index Method to evaluate the risk to contract muscle-tendon pathologies with the innovative use of the joystick and push buttons

Evaluating our system with the electromyography by positioning some electrodes on the zones interested by our research, has enabled us to scientifically investigate the muscular contractions and evaluate the stresses imposed by various working positions

Results assessed by comparing the traditional working system of the operators with the DYCS Brieda system. The diagrams show both static and dynamic positions.The data here shown are relevant to the lumbar area, but in our medical report, we have charts for each zone concerned

13

PTP Malaysia

Port of Tanjung Pelepas

The 18th biggest port in the world This design reduces overall stress, including, as a consequence, reduction of the lower back lumbar load. Lumbar stress has always been one of the main causes of strain, loss of productivity and development of functional muscular disorders associated with crane operation. Now this problem has finally been properly addressed.

15

Dynamic 07 Brieda Seat SB4

Technical features: Control Station according to EN 1005-3/4/5 • Versatile design accommodating a variety of operator work positions in relation to adjustable seat and console positions • Universal cab floor attachment point for all cab types • Rotating Control Station with sturdy manual locking device • Feed 24VCC-20A • Control station with electric height adjustment using industrial-grade linear actuators • Innovative high-tech gas shock absorbing system in the control station base • Electric linear actuator console adjustments for height, tilt and horizontal forwards/backwards movement • No. 2 Joysticks wired and working • Push buttons • Wiring and terminal board in the consoles of the joysticks and push button • Lateral appendix for the right console with push buttons and wiring till terminal board in the box.

16

Seat SB4 • Ergonomically-designed, heavy-duty seat for optimum, various-size operator comfort with: • Seat forward/backward adjustment • Headrest height and tilt adjustment • Tilting backrest for operator relaxation • Seat cushion designed for optimal blood circulation in thigh zone • Lumbar support • Safety shoulder straps and seat belt

280

280 80

500

310

200

80

160

Floor Level 250 1120

345

Brieda Control Station Type Dynamic 07 DWG 27.140.6 / A

60

250

280

550

90

660 in.R Rm

220

17

140

280

270 280 ( BASE )

0 26

220

560

M10

Floor Fixing ARRANGEMENT

550

Side Console OPTIONS

BD330

LayOut

Adjustable support for touch screen Main side panel Control station Dynamic 07

Modular Smart bar

18

BD110

BD220

Support type: Brieda Supp003

Asjustable support for touch screen Fixed man side panel

Adjustable auxiliary side panel Fixed main side panel

Control station Dynamic 07

Smart bar

Smart bar

Control station Dynamic 07

19

Brieda Cabins

di Rino Brieda e figlio Srl Via del Laghetto 21 33080 Porcia / Pn / Italy Tel. +39 0434 921071 Fax +39 0434 922758 e-mail: [email protected]

http: //www.briedacabins.com

rAffin / Stampa DTG - BRDDYCS 01/2012

We are just entering our 40th year of activity with same design innovation attitude, certain that this way we can really help our customers success