TUBE AND HOSE FITTINGS
Plastic Tube and Hose Fittings ADAPTERS–MALE
Suggested advantages: • No corrosion • Lightweight • Can often be used with fluids that attack metals • Low cost • Do not cut fingers • Electrically non-conductive • No galvanic reaction with metals • Made of materials listed by FDA. Other fittings not listed here are available. Can be run in other materials (eg. nylon 6-6HS, polypropylene) for a minimum of 10,000. NOTES: MPT – Male taper pipe thread GHT – Garden hose thread Temperature Ratings HDPE: -55° to +90°C Nylon: -40° to +100°C
ADAPTERS–FEMALE
Part No. Nylon 6
Black HDPE
F F F F F
253 23 24 25 26
F F F F F
253 PE 23 PE 24 PE 25 PE 26 PE
F F F F F
43 44 45 46 48
F F F F F
43 44 45 46 48
F F F F F
64 65 66 68 610
F F F F F
64 PE 65 PE 66 PE 68 PE 610 PE
F F F F F F F
83 84 86 88 810 812 816
F F F F F F
83 PE 84 PE 86 PE 88 PE 810 PE 812 PE —
F F F F F F
124 126 128 1210 1212 1216
F F F F F
124 PE 126 PE 128 PF 1210 PE 1212 PE —
F F F F F F
G3 G4 G6 G8 G10 G12
F 1612 F 1616
Available in sizes 1/8"-3/4" tube ID in both natural nylon and black polyethylene.
PE PE PE PE PE
— — — — — F 1612 PE F 1616 PE
MPT
1/8
1/4
3/8
1/2
3/4
GHT
Tube ID 5/32 3/16 1/4 5/16 3/8 3/16 1/4 5/16 3/8 1/2 1/4 5/16 3/8 1/2 5/8 3/16 1/4 3/8 1/2 5/8 3/4 1 1/4 3/8 1/2 5/8 3/4 1 3/16 1/4 3/8 1/2 5/8 3/4
1
3/4 1
A 1141 A 114 A 114112
— — —
1-1/4
1 1-1/4 1-1/2
A 11234 A 1121 A 112114 A 112
— — — —
1-1/2
3/4 1 1-1/4 1-1/2
A 200
—
2
2
Minimum order 50.
168
Cords Canada Ltd., 62 Densley Avenue, Toronto, ON M6M 5E1 Toronto/GTA: 416-242-6811 North America toll free: 1-800-363-5080 Fax: 416-242-6819 Email:
[email protected]
Plastic Tube and Hose Fittings CONTINUED ELBOWS-MALE
NOTES: MPT – Male taper pipe thread GHT – Garden hose thread Temperature Ratings HDPE: -55° to +90°C Nylon: -40° to +100°C
ELBOWS–FEMALE
Male Part No. Nylon 6 Black HDPE E E E E
23 24 25 26
E E E E
23 24 25 26
E E E E E E
43 44 45 46 48 410
E E E E E E
43 PE 44 PE 45 PE 46 PE 48 PE 410 PE
E E E E E
64 65 66 68 610
E E E E E
64 PE 65 PE 66 PE 68 PE 610 PE
E E E E E E
84 86 88 810 812 816
E E E E E
84 PE 86 PE 88 PE 810 PE 812 PE —
E E E E E E
124 126 128 1210 1212 1216
E E E E E E
124 PE 126 PE 128 PE 1210 PE 1212 PE 1216 PE
1/8
1/4
3/8
1/2
Tube ID 3/16 1/4 5/16 3/8 3/16 1/4 5/16 3/8 1/2 5/8 1/4 5/16 3/8 1/2 5/8 1/4 3/8 1/2 5/8 3/4 1
3/4
1/4 3/8 1/2 5/8 3/4 1
— — — —
GHT
3/8 1/2 3/4 1
E 168 E 1612 E 1616
— E 1612 PE E 1616 PE
1
1/2 3/4 1
EL 1141 EL 114
— —
1-1/4
1 1-1/4
EL 112
—
1-1/2
1-1/2
EL 200
—
2
2
EL 3438G EL 3412G EL 3434G EL 3410G
Available in sizes 1/8"-3/4" tube ID in both natural nylon and black polyethylene.
PE PE PE PE
MPT
Minimum order 50.
Cords Canada Ltd., 62 Densley Avenue, Toronto, ON M6M 5E1 Toronto/GTA: 416-242-6811 North America toll free: 1-800-363-5080 Fax: 416-242-6819 Email:
[email protected]
169
Plastic Tube and Hose Fittings CONTINUED ELBOWS–BARBED Nylon 6 L 33 L 44 L 66
Part No. Black HDPE L 33 PE L 44 PE L 66 PE
Tube ID 3/16 1/4 3/8
Tube ID 3/16 1/4 3/8
L 84 L 86 L 88
L 84 PE L 86 PE L 88 PE
1/2
1/4 3/8 1/2
L 1010 L 1212 L 1616
L 1010 PE L 1212 PE —
5/8 3/4 1
5/8 3/4 1
1-1/2 2
1-1/2 2
MPT
Hose ID
1/8
3/16 1/4
PE PE PE PE
1/4
3/16 1/4 3/8 1/2
AT 64 AT 66 AT 68
AT 64 PE AT 66 PE AT 68 PE
3/8
1/4 3/8 1/2
AT 86 AT 88 AT 816
AT 86 PE AT 88 PE —
— —
EB 112 EB 200 Minimum order 50.
TEES–ADAPTER Part No.
NOTES:
Nylon 6
Black HDPE
AT 23 AT 24
AT 23 PE AT 24 PE
AT AT AT AT
AT AT AT AT
43 44 46 48
43 44 46 48
1/2
3/8 1/2 1
AT 1212 AT 1216
— —
3/4
3/4 1
AT 1616
—
1
1
MPT – Male taper pipe thread Temperature Ratings HDPE: -55° to +90°C Nylon: -40° to +100°C
170
Minimum order 50.
Cords Canada Ltd., 62 Densley Avenue, Toronto, ON M6M 5E1 Toronto/GTA: 416-242-6811 North America toll free: 1-800-363-5080 Fax: 416-242-6819 Email:
[email protected]
Plastic Tube and Hose Fittings CONTINUED SWIVEL ADAPTERS AND NUTS Nylon
Part No. Black HDPE
Nuts_Swivel SAN
SAN SAN SAN SAN SAN
SAN 4W
4 4W 6 8 G
Not available
Adapters_Swivel
SA
SAG
SA 4 SA 6 SA 8 SA 8-4
FPT 1/4 1/4 Wing 3/8 1/2 GHT
Hose ID Depends on adapter (see below)
Fits nut size SAN 4 or 4W SAN 6 SAN 8 SAN 8
1/4 3/8 1/2 1/4
SAN G
1/4 3/8 1/2 3/4
Hose ID 1/8 3/16 1/4 5/16 3/8 1/2 5/8 3/4 1 1-1/4 1-1/2
Hose ID 1/8 3/16 1/4 5/16 3/8 1/2 5/8 3/4 1 1-1/4 1-1/2
Not available SAG SAG SAG SAG
4 6 8 12
Minimum order 50.
CONNECTORS_BARBED HOSE MENDERS
CONNECTORS_REDUCING
NOTES: FPT – Female taper pipe thread GHT – Garden hose thread Temperature Ratings HDPE: -55° to +90°C Nylon: -40° to +100°C
C 22 C 22 PE C 33 C 33 PE C 44 C 44 PE C 55 C 55 PE C 66 C 66 PE C 88 C 88 PE C 1010 C 1010 PE C 1212 C 1212 PE C 1616 C 1616 PE C 114 — C 112 — Minimum order 50.
Tube ID
Tube ID
C 42 C 43
C 42 PE C 43 PE
1/4
1/8 3/16
C 64
C 64 PE
3/8
1/4
C 84 C 86
C 84 PE C 86 PE
1/2
1/4 3/8
C 106 C 108
C 106 PE C 108 PE
5/8
3/8 1/2
Minimum order 50. Cords Canada Ltd., 62 Densley Avenue, Toronto, ON M6M 5E1 Toronto/GTA: 416-242-6811 North America toll free: 1-800-363-5080 Fax: 416-242-6819 Email:
[email protected]
171
Plastic Tube and Hose Fittings CONTINUED TEES–BARBED
Part No.
Part No.
Nylon
Black HDPE
Leg Hose ID
Tee Hose ID
T 22
T 22 PE
1/8
1/8
T 532
T 532 PE
5/32
5/32
T 33 T 36
T 33 PE T 36 PE
3/16
3/16 3/8
T T T T T
T T T T T
44 PE 45 PE 46 PE 48 PE 410 PE
1/4
1/4 5/16 3/8 1/2 5/8
T 55 PE T 58 PE T 510 PE
5/16
44 45 46 48 410
T 55 T 58 T 510
5/16 1/2 5/8
Nylon
Black HDPE
T T T T T
64 66 68 610 612
T T T T T
64 PE 66 PE 68 PE 610 PE 612 PE
T T T T
86 88 810 812
T T T T
86 PE 88 PE 810 PE 812 PE
1/2
3/8 1/2 5/8 3/4
T 1010
T 1010 PE
5/8
5/8
T 1212
T 1212 PE
3/4
3/4
T 1616
T 1616 PE
1
1
1-1/4
1-1/4
1-1/2 2
1-1/2
__
T 114 NOTES:
__
T 112
Temperature Ratings HDPE: -55° to +90°C Nylon: -40° to +100°C
__
T 200
Leg Hose ID
3/8
Tee Hose ID 1/4 3/8 1/2 5/8 3/4
2
Minimum order 50.
Nylon Hex Pipe Nuts These natural nylon nuts are for use where insulation is desirable, such as plumbing, electrical work, etc.
Fit NPT sizes. Straight thread (available taper thread). Also see Nylon Locknuts, pages 92 or 131. Part No. PN PN PN PN PN
1/8* 1/4 3/8 1/2 3/4
F
D
H
.562 .812 1.000 1.250 1.500
.640 .943 1.130 1.400 1.700
.225 .232 .285 .362 .409
Minimum order 100. * This size only double chamfered; all others washer-faced. All sizes also available taper tapped (NPT).
172
Cords Canada Ltd., 62 Densley Avenue, Toronto, ON M6M 5E1 Toronto/GTA: 416-242-6811 North America toll free: 1-800-363-5080 Fax: 416-242-6819 Email:
[email protected]
Miniature Nylon Tube Fittings BARBED ADAPTERS–STRAIGHT The sharp barb makes a leak-proof seal. Just push on polyurethane, PE, PVC or other soft tubing with end cut straight. (Withstands 75-125 psi depending on tubing.) Clamp may not be required for low pressure applications. Part No. Nylon
Polypropylene
Tube ID
Thread
MIF 01 MIF 11 MIF 21
MIF 01 PP MIF 11 PP MIF 21 PP
1/16 3/32 1/8
10/32 UNF
MIF 225 MIF 425
MIF 225 PP MIF 425 PP
1/8 1/4
1/4-28 UNF
MIF MIF MIF MIF MIF MIF MIF
02 12 22 532 32 42 62
MIF 02 PP MIF 12 PP MIF 22 PP MIF 532 PP MIF 32 PP MIF 42 PP MIF 62 PP
1/16 3/32 1/8 5/32 3/16 1/4 3/8
1/8 MPT
MFF 22 MFF 24
MFF 22 PP MFF 24 PP
1/8
1/8 FPT 1/4 FPT
MIF MIF MIF MIF
MIF MIF MIF MIF
PP PP PP PP
1/16 1/8 3/16 1/4
MIF 68 PP MIF 68 MIF 88 PP MIF 88 Minimum order 50.
3/8 1/2
1/2
NOTES: MPT – Male taper pipe thread FPT – Female taper pipe thread Temperature Ratings Nylon: -40° to +100°C Polypropylene: -20° to +100°C
04 24 34 44
04 24 34 44
1/4 MPT
BARBED ADAPTERS–ELBOW Part No. Nylon
Polypropylene
Tube ID
Thread
MIE 01 MIE 21
MIE 01 PP MIE 21 PP
1/16 1/8
10/32 UNF
MIE 22 MIE 32 MIE 42
MIE 22 PP MIE 32 PP MIE 42 PP
1/8 3/16 1/4
1/8 MPT
3/16 1/4
1/8 FPT
MEF 32 MEF 32 PP MEF 42 MEF 42 PP Minimum order 50.
Cords Canada Ltd., 62 Densley Avenue, Toronto, ON M6M 5E1 Toronto/GTA: 416-242-6811 North America toll free: 1-800-363-5080 Fax: 416-242-6819 Email:
[email protected]
173
Miniature Nylon Tube Fittings CONTINUED ELBOWS–BARBED
Regular
Reducing
Part No. Nylon MIL 0 MIL 1 MIL 2 MIL 3 MIL 4 MIL 6 MIL 8
Part No.
PP MIL 0 MIL 1 MIL 2 MIL 3 MIL 4 MIL 6 MIL 8
PP PP PP PP PP PP PP
Tube ID 1/16 3/32 1/8 3/16 1/4 3/8 1/2
Nylon MIL 01 MIL 02 MIL 23 MIL 35
PP MIL 01 PP MIL 02 PP MIL 23 PP MIL 35 PP
Minimum order 50.
Minimum order 50.
TEES–ADAPTER Part No. Nylon
Polypropylene
MAT MAT MAT MAT
MAT MAT MAT MAT
21 02 42 22
21 02 42 22
PP PP PP PP
Tube ID 1/8 1/16 1/4 1/8
Thread 10/32 UNF 1/8 MPT
Minimum order 50.
TEES–RUN Part No. Nylon
Polypropylene
MRT 32
MRT 32 PP
Tube ID
Thread
3/16
1/8 MPT
Minimum order 50.
TEES–BARBED Part No. Nylon
Polypropylene
MIT MIT MIT MIT MIT MIT MIT MIT
MIT 0 PP MIT 1 PP MIT 2 PP MIT 53 PP MIT 3 PP MIT 4 PP MIT 6 PP MIT 8 PP
0 1 2 53 3 4 6 8
Tube ID 1/16 3/32 1/8 5/32 3/16 1/4 3/8 1/2
Minimum order 50.
NOTES: MPT – Male taper pipe thread Temperature Ratings Nylon: -40° to +100°C Polypropylene: -20° to +100°C
174
Cords Canada Ltd., 62 Densley Avenue, Toronto, ON M6M 5E1 Toronto/GTA: 416-242-6811 North America toll free: 1-800-363-5080 Fax: 416-242-6819 Email:
[email protected]
Tube to Tube 1/16 - 3/32 1/16 - 1/8 1/8 - 3/16 3/16 - 5/32
Miniature Nylon Tube Fittings CONTINUED CONNECTORS–BARBED
BARBED CONNECTORS–REDUCING
Part No. MIC 00 MIC 11 MIC 22 MIC 33 MIC 44 MIC 66 MIC 88
Tube ID 1/16 3/32 1/8 3/16 1/4 3/8 1/2
Part No. MIC 01 MIC 02 MIC 12 MIC 32 MIC 453 MIC 43 MIC 62 MIC 64
Minimum order 50.
Tube ID 3/32 to 1/16 1/8 to 1/16 1/8 to 3/32 3/16 to 1/8 1/4 to 5/32 1/4 to 3/16 3/8 to 1/8 3/8 to 1/4
Minimum order 50.
THREAD REDUCERS
NIPPLE Part No.
Thread
MIR 21 MIR 225 MIR 41 MIR 425 MIR 42
1/8 MPT to 10/32 UNF 1/8 MPT to 1/4-28 UNF 1/4 MPT to 10/32 UNF 1/4 MPT to 1/4-28 UNF 1/4 MPT to 1/8-27 FPT
Part No. MIN 11 MIN 22 MIN 44
Thread 10/32 UNF 1/8 MPT 1/4 MPT
Minimum order 50.
Minimum order 50.
PLUGS Part No. MIP 1 MIP 2 MIP 4
Thread
NOTES:
10/32 UNF 1/8 MPT 1/4 FPT
MPT – Male taper pipe thread Temperature Ratings Nylon: -40° to +100°C Polypropylene: -20° to +100°C
Minimum order 50.
LOCKING SLEEVES Locking sleeves enable barbed fittings to be used at up to 100% of the rated burst pressure of the flexible plastic tubing. To use, simply slide appropriate Part No. LS LS LS LS LS
sleeve over suggested OD tubing, insert miniature barbed fitting into tubing, slide sleeve back over barb. Soft tubing locks onto the self-sealing barb.
Tube OD
SD
T
ID
1/8 5/32 3/16 1/4 3/8
.310 .375 .400 .435 .625
.245 .281 .300 .315 .375
.147 .176 .215 .260 .425
125 156 187 250 375
Minimum order 1000.
Cords Canada Ltd., 62 Densley Avenue, Toronto, ON M6M 5E1 Toronto/GTA: 416-242-6811 North America toll free: 1-800-363-5080 Fax: 416-242-6819 Email:
[email protected]
175
Miniature Tube/Hose Fittings BARBED CROSS CONNECTORS Stocked in nylon and polypropylene, this 1/4" barbed cross fitting features 4 self-sealing barbs placed at 90o increments from an easy-to-grip, square base and will fit tubing with an ID of 1/4". Self-sealing sharp barbs are tested to hold up to 125 P.S.I. without the use of ties or clamps. This fitting is also available in black heat-stabilized nylon, HDPE, LDPE, polycarbonate, Kynar and acetal if quantities are sufficient.
Polypropylene Tube Fittings Cords offers a full line of polypropylene tube fittings including tube to tube, tube to male and tube to female pipes. They come as union connectors, bulkhead, elbow and tee unions, etc.
176
Sizes range from 1/4" to 5/8" nominal tube OD and from 1/8 to 3/4 NPT for either male or female pipe. Please call for further information.
Cords Canada Ltd., 62 Densley Avenue, Toronto, ON M6M 5E1 Toronto/GTA: 416-242-6811 North America toll free: 1-800-363-5080 Fax: 416-242-6819 Email:
[email protected]
Premium Grade Fittings Cords is proud to offer a full line of premium grade fittings designed with laboratory and instrumentation applications in mind. All premium grade fittings feature a barb moulded without a parting line. No parting line ensures a leak-proof seal by eliminating flash or mould mismatch in the moulding process. Premium grade fittings are moulded from 100% virgin material only and are carefully manufactured under controlled conditions with new technology and inspected for even the slightest quality defect. These fittings have an easy-to-hold base and a barb 1.4 to 1.5 times larger (depending on size of fitting) than the tubing ID.
Once the single sharp barb is inserted into the tubing, a secure, leak-proof seal is formed that can hold up to 125 P.S.I. without the use of clamps or ties. They come in Tube to Port Fittings, 90 degree Tube to Port, Barbed Connectors, Barbed Reducing Connectors, Barbed Tees, Barbed Reducing Tees, Barbed Elbows, etc. Available in white nylon, natural polypropylene, natural Kynar and clear polycarbonate.
“Y” CONNECTORS - PREMIUM GRADE
Part No.
Tubing ID
MY 01 MY 11 MY 2 MY 53 MY 3
1/16 x 1/16 x 1/16 3/32 x 3/32 1/32 1/8 x 1/8 x 1/8 5/32 x 5/32 x 5/32 3/16 x 3/16 x 3/16
MY 4 MY 6
1/4 x 1/4 x 1/4 3/8 x 3/8 x 3/8
Cords Canada Ltd., 62 Densley Avenue, Toronto, ON M6M 5E1 Toronto/GTA: 416-242-6811 North America toll free: 1-800-363-5080 Fax: 416-242-6819 Email:
[email protected]
177
Luer Fittings QUICK-DISCONNECT
Quick-Disconnect Luer Fitting
Quick-Disconnect Swivel Fitting
Luer fittings have conical tapers moulded to ISO standards that ensure compatibility with all luers moulded to the same standard. With locking or non-locking characteristics, they can be used in most any application and are pressure tested up to 125 P.S.I. They are stocked in nylon, polypropylene and clear polycarbonate. The clear polycarbonate offers high-impact strength with clear visibility for visual inspections. Polycarbonate can be autoclaved and is FDA approved.
Made of nylon or clear polycarbonate, the quick-disconnect swivel luer fittings offer a more secure lock than a standard luer connection. The additon of the swivel luer lock assures that the connection is strong and aids in the removal of the luer from the connection. Simply twist the swivel nut counterclockwise and the connection is disassembled. No need to twist the tubing or rearrange downstream apparatus in order to accomodate the luer connection. Allows for universal connections.
FEMALE Full-thread female luers are designed to provide an even greater sealing mechanism for quick-disconnect luer applications. The full thread gives more sealing area for the connection and will provide a virtually leak-proof seal up to 125 P.S.I. when used with male luers that have a locking nut.
Full-thread female luers are available in natural nylon, natural polypropylene and clear polycarbonate and come in a variety of sizes and applications.
Luer Valves One-Way Valve Open
Closed
Manufactured in durable clear polycarbonate, featuring a white high-density polyethylene handle, these 1-way stopcock luer valves come with two ports with a 360o rotating handle that will simply shut off flow when the “OFF” handle is rotated perpendicular with either port. This has the feature of rotating the handle 90o in any direction to quickly change from ON to OFF or from OFF to ON. The 4-way stopcock luer valve has three ports with a 360o rotating handle that will shut off flow when the “OFF” handle is
178
Open
Four-Way Valve
Closed
rotated in line with any port. The handle may also be rotated to 180o from the middle port to allow flow to all three ports. They are available with locking male, slip male or threaded female ports for easy, secure connections to standard luer applications. Our locking male port features a free-turning nut to allow simple installation without rotating the body or the connecting line.
Cords Canada Ltd., 62 Densley Avenue, Toronto, ON M6M 5E1 Toronto/GTA: 416-242-6811 North America toll free: 1-800-363-5080 Fax: 416-242-6819 Email:
[email protected]
Automotive Fittings PLUGS
(5/32 ID)
Part No. AP 3/8-24 AP 7/16-24 AP 1/2-20 AP 9/16-18 AP 9/16-20
Thread 3/8-24 UNF 7/16-24 UNF 1/2-20 UNF 9/16-18 UNF 9/16-20 UNF
A .380 .440 .500 .560 .560
B .580 .620 .660 .690 .700
ADAPTERS (5/32 ID)
Part No. AA 3/8-24 AA 7/16-24 AA 1/2-20 AA 9/16-18 AA 9/16-20
Thread 3/8-24 UNF 7/16-24 UNF 1/2-20 UNF 9/16-18 UNF 9/16-20 UNF
A
B
C
D
E
F
.110 .100 .110 .100 .110
.173 .173 .173 .173 .173
.380 .380 .380 .380 .380
.580 .620 .670 .690 .700
.230 .230 .230 .230 .230
.380 .440 .500 .560 .560
Cords Canada Ltd., 62 Densley Avenue, Toronto, ON M6M 5E1 Toronto/GTA: 416-242-6811 North America toll free: 1-800-363-5080 Fax: 416-242-6819 Email:
[email protected]
179
Pipe Fittings ELBOW–FEMALE TAPER THREADS Part No. Gray Nylon
Polypropylene
FPT
FPT
ELF ELF ELF ELF ELF ELF ELF
ELF ELF ELF ELF ELF ELF ELF
1/4 1/2 3/4 1 1-1/4 1-1/2 2
1/4 1/2 3/4 1 1-1/4 1-1/2 2
MPT
FPT
14 12 34 100 114 112 200
14 PP 12 PP 34 PP 100 PP 114 PP 112 PP 200 PP
Minimum order 10.
ADAPTERS–MALE TO FEMALE THREADS Part No. Gray Nylon
Polypropylene
G 1818
G 1818 PP
1/8
1/8
G 3412 G 3434
G 3412 PP G 3434 PP
GHT
1/2 3/4
FPT
FPT
1/2 3/4 1 1-1/4 1-1/2 2
1/2 3/4 1 1-1/4 1-1/2 2
Minimum order 10.
COUPLINGS–FEMALE TAPER THREADS Part No. Gray Nylon
NOTES: MPT – Male taper pipe thread FPT – Female taper pipe thread GHT – Garden hose thread
Polypropylene
FTC 12 FTC FTC 34 FTC FTC 100 FTC FTC 114 FTC FTC 112 FTC FTC 200 FTC Minimum order 10.
12 PP 34 PP 100 PP 114 PP 112 PP 200 PP
Temperature Ratings Nylon: -40° to +100°C Polypropylene: -20° to +100°C
CAPS Part No. Nylon 6
Black HDPE
FPT
Style
HC HC HC RC RC
HC HC HC RC RC
1/4 3/8 1/2 GHT 3/4
Hex Hex Hex Ribbed Ribbed
4 6 8 G 12
4 PE 6 PE 8 PE G PE 12 PE
Minimum order 50.
180
Cords Canada Ltd., 62 Densley Avenue, Toronto, ON M6M 5E1 Toronto/GTA: 416-242-6811 North America toll free: 1-800-363-5080 Fax: 416-242-6819 Email:
[email protected]
Pipe Fittings CONTINUED STREET ELBOWS
Part No. Gray Nylon
Polypropylene
MPT
FPT
SE SE SE SE SE SE SE SE SE
18 14 38 12 34 100 114 112 200
SE SE SE SE SE SE SE SE SE
18 PP 14 PP 38 PP 12 PP 34 PP 100 PP 114 PP 112 PP 200 PP
1/8 1/4 3/8 1/2 3/4 1 1-1/4 1-1/2 2
1/8 1/4 3/8 1/2 3/4 1 1-1/4 1-1/2 2
SE SE SE SE
1418 1814 1838 1438
SE SE SE SE
1418 1814 1838 1438
1/4 1/8 1/8 1/4
1/8 1/4 3/8 3/8
PP PP PP PP
Minimum order 10.
NOTES: MPT – Male taper pipe thread FPT – Female taper pipe thread Temperature Ratings Nylon: -40° to +100°C Polypropylene: -20° to +100°C
NIPPLES Part No. Nylon 6
Black HDPE
MPT
MPT
N N N N N N N N N
N N N N
1/8 1/4 3/8 1/2 3/4 1 1-1/4 1-1/2 2
1/8 1/4 3/8 1/2 3/4 1 1-1/4 1-1/2 2
22 44 66 88 1212 1616 1140 1120 2000
22 PE 44 PE 66 PE 88 PE — N 1616 PE — — —
Minimum order 50.
Cords Canada Ltd., 62 Densley Avenue, Toronto, ON M6M 5E1 Toronto/GTA: 416-242-6811 North America toll free: 1-800-363-5080 Fax: 416-242-6819 Email:
[email protected]
181
Pipe Fittings CONTINUED NIPPLES–REDUCER Nylon 6
NOTES: MPT – Male taper pipe thread FPT – Female taper pipe thread GHT – Garden hose thread Temperature Ratings HDPE: -55° to +90°C Nylon: -40° to +100°C
Part No. Black HDPE
MPT
MPT
R 42
R 42 PE
1/4
1/8
R 62 R 64
R 62 PE R 64 PE
3/8
1/8 1/4
R 82 R 84 R 86
R 82 PE R 84 PE R 86 PE
1/2
1/8 1/4 3/8
R 126 R 128
R 126 PE R 128 PE
3/4
3/8 1/2
GHT
1/2 3/4
R G8 R G12
— —
Minimum order 50.
REDUCER BUSHINGS
NOTES: MPT – Male taper pipe thread FPT – Female taper pipe thread Temperature Ratings HDPE: -55° to +90°C Nylon: -40° to +100°C
Part No. Nylon 6 RB 1418
Black HDPE RB 1418 PE
MPT 1/4
FPT 1/8
RB 3818 RB 3814
RB 3818 PE RB 3814 PE
3/8
1/8 1/4
RB 1214 RB 1238
RB 1214 PE RB 1238 PE
1/2
1/4 3/8
RB RB RB RB
RB RB RB RB
3/4
1/8 1/4 3/8 1/2
3418 3414 3438 3412
3418 3414 3438 3412
PE PE PE PE
RB 1012 RB 1034
RB 1012 PE RB 1034 PE
1
1/2 3/4
RB 11434 RB 1141
RB 11434 PE RB 1141 PE
1-1/4
3/4 1
RB 11234 RB 1121 RB 112114
RB 11234 PE RB 1121 PE RB 112114 PE
1-1/2
3/4 1 1-1/4
RB 2001 RB 200114 RB 200112
RB 2001 PE RB 200114 PE RB 200112 PE
2
1 1-1/4 1-1/2
RB 300200
RB 300200 PE
3
2
Minimum order 10.
182
Cords Canada Ltd., 62 Densley Avenue, Toronto, ON M6M 5E1 Toronto/GTA: 416-242-6811 North America toll free: 1-800-363-5080 Fax: 416-242-6819 Email:
[email protected]
Pipe Fittings CONTINUED PLUGS–HEX HEAD Part No. Nylon 6 P2 P4 P6 P8
Black HDPE P 2 PE P 4 PE P 6 PE P 8 PE
MPT 1/8 1/4 3/8 1/2
__
PG 12
3/4 GHT
P 12 PE P 16 PE P 114 PE __
P 12 P 16 P 114 P 112
3/4 1 1-1/4 1-1/2
Minimum order 50.
TEES–FEMALE TAPER THREADS Part No. Gray Nylon 6
Polypropylene
FPT
TTM 18 TTM 14 TT 12 TT 34 TT 100 TT 114 TT 112 TT 200
TTM 18 PP TTM 14 PP TT 12 PP TT 34 PP TT 100 PP TT 114 PP TT 112 PP TT 200 PP
1/8 1/4 1/2 3/4 1 1-1/4 1-1/2 2
Minimum order 10.
GAUGE TEES–FEMALE TAPER THREADS with port for gauge Part No. Gray Nylon 6 Polypropylene
NOTES: MPT – Male taper pipe thread FPT – Female taper pipe thread Temperature Ratings HDPE: -55° to +90°C Nylon: -40° to +100°C
FPT Tee
FPT Gauge
TT 1218
TT 1218 PP
1/2
1/8
TT 3418 TT 3414
TT 3418 PP TT 3414 PP
3/4
1/8 1/4
TT 10018 TT 10014
TT 10018 PP TT 10014 PP
1
1/8 1/4
TT 11418 TT 11414
TT 11418 PP TT 11414 PP
1-1/4
1/8 1/4
TT 11218 TT 11214
TT 11218 PP TT 11214 PP
1-1/2
1/8 1/4
Minimum order 10.
Cords Canada Ltd., 62 Densley Avenue, Toronto, ON M6M 5E1 Toronto/GTA: 416-242-6811 North America toll free: 1-800-363-5080 Fax: 416-242-6819 Email:
[email protected]
183
Tubing
FLEXIBLE VINYL (PVC) DUROMETER 68 SHORE A
Plasticized from non-toxic, flexible PVC, this tubing is resistant to a wide range of chemicals. A good choice for various piping problems where the use of corrosive, pure or sensitive solutions is involved. While not as strong or kinkresistant as polyurethane tubing, this is an excellent alternative choice if cost is the determining factor. Available in 12 sizes, from IDs of 1/16" up to 1/4" (some IDs have different wall thicknesses to choose from). They come in both 100-foot coils and bulk reel lengths in natural (clear), black, white, and in the following opaque colours: blue, yellow, red and green. (Note: all pigments are non-migratory.) Vinyl tubing is also available in crystal clear 70 durometer, in tube IDs of 1/16" up to 2-1/2". Formulated of V-1 vinyl, it fully meets FDA specifications for contact with food and drugs for human consumption.
184
POLYURETHANE DUROMETER 85 SHORE A
NYLON
This polyether-based polyurethane tubing shares the best properties of two materials: it has the elongation and recovery characteristics associated with rubber and also offers the chemical resistance of plastic. It demonstrates superior resistance to kinking, abrasion, tearing, hydrolysis, oxidation, ozone, fungus and humidity. It’s an excellent choice for flexibility, even in cold temperatures. Some of the typical uses for polyurethane tubing are robotics, air tools, vacuum equipment, medical and lab applications and pressure measurement apparatus. Available in 12 sizes, from IDs of 1/16" up to 1/4" (some IDs have different wall thicknesses to choose from). They come in both 100-foot coils and bulk reel lengths in natural (clear), black, white, and in the following opaque and transparent colours: blue, yellow, red and green. (Note: all pigments used are nonmigratory.)
The nylon tubing comes in two styles: flexible and semi-rigid high strength. Both are made of nylon 11 and come in either black or white. Flexible: Lightweight tubing with extremely low level water absorption. Its resistance to stress cracking far outweighs that of ordinary nylon tubing. Thirteen tube IDs are available, from .093" to .253". Semi-rigid, high strength: This tubing offers better chemical resistance than the flexible nylon, has good resistance to high ambient temperatures and low moisture absorption. It contains no plasticizers. Its high tensile strength gives it excellent coupling retention in high pressure, temperature and vibration situations. Comes in eleven tube IDs, from .091" to .350".
POLYETHYLENE DUROMETER 55 SHORE D Available in natural or UV-resistant black extruded linear LDPE. Provides excellent flexibility and low temperature toughness. It comes in four sizes (IDs of 1/16", .170, 1/4", and 3/8") in 100-foot coils or bulk reel lengths. Other types of polyethylene tubing available: instrument grade (in a variety of colours), black flame-retardant and black HDPE.
POLYPROPYLENE Laboratory grade polypropylene tubing comes in white or UV-resistant black. May be used at higher temperatures and working pressures than polyethylene. Its resistance to environmental stress cracking, hot water and hot corrosive acids is excellent (it will last much longer than nylon tubing in hot water service). It has good resistance to vegetable oils, and water absorption is less than .01%. Meets FDA requirements for food contact. It is available in seven tube IDs, from .080" to .500".
Cords Canada Ltd., 62 Densley Avenue, Toronto, ON M6M 5E1 Toronto/GTA: 416-242-6811 North America toll free: 1-800-363-5080 Fax: 416-242-6819 Email:
[email protected]