Double-Ferrule Instrumentation Tube Fittings
Interchangeability Brennan Double-Ferrule Compression Tube Fittings are manufactured to be totally interchangeable and fully component intermixable with the Swagelok® and Parker A-LOK® tube fitting brands.
Brennan Double-Ferrule Compression Tube Fittings are totally interchangeable with tube fittings of certain other manufacturers including Parker CPITM and HOKE Gyrolok®.
2
Swagelok® is a registered trademark of Swagelok Company. A-LOK® is a registered trademark and CPITM is a trademark of Parker Hannifin Corporation. Gyrolok® is a registered trademark of HOKE Incorporated.
Introduction Brennan’s Double-Ferrule Compression Tube Fittings provide leak-proof, torque-free seals at all tubing connections. They eliminate potentially hazardous and expensive leaks in instrumentation, process, pneumatic, hydraulic, gas and other tubing systems. The basic Double-Ferrule Tube Fitting is a four-piece fitting consisting of the nut, back ferrule, front ferrule and the body. When installed, it becomes a five-piece connection with the addition of the tubing to provide a solid leak-free joint. The two ferrules grasp tightly around the tube with no damage to the tube wall. Exhaustive tests have proved that the tubing will yield before a Brennan Double-Ferrule joint starts leaking. The secret behind the success of the Brennan Double-Ferrule Tube Fitting lies in the two-ferrule design, which combines geometry and metallurgy. All action in the fitting is an axial movement along the tube instead of a rotary motion to create the joint. This axial movement prevents transmission of any torque from a fitting to the tubing. Since there is no initial strain in the tubing, the making of the joint does not weaken the tubing. Another advantage of the Brennan Double-Ferrule Tube Fitting is that the swaging action of the twin ferrules overcomes variations in tubing wall thickness, hardness and dimensional tolerance. Brennan’s Double-Ferrule Tube Fittings are easy to install and require no special tools. They are reusable several times and can withstand heavy impulse and vibration in both vacuum and pressure systems.
Brennan Double-Ferrule Compression Tube Fitting Features: • Self-aligning • Work on thick and thin wall tubing • Resist vibration • Work on a variety of tube materials • All components are made of the same material for thermal compatibility and corrosion resistance • Resist temperature cycling • Compensate for the variables encountered in the tube and materials • Do not significantly reduce flow area
Performance • Work in vacuums, as well as at low and high pressures • Seal at low cryogenic temperatures, as well as elevated temperatures rated for the tube • Seal consistently over a wide range of temperature cycling • Seal repeatedly under both make and remake conditions • Resist pressure beyond the tubing burst point
Assembly • Use geometry rather than torque for uniformity of make-up. (To complete the joint, it requires only a 1-1/4 turn after snug-tightening.) • Do not require disassembly and inspection of ferrule swaging at every make-up • Do not require any special tools for assembly
Service Brennan’s Double-Ferrule Tube Fittings are available in a wide range of materials, sizes, connections and configurations from our local distributors and supported by substantial inventories at our distribution centers.
B r e n n a n I n d u st r ies Atlanta • Cleveland • Dallas • Los Angeles • Seattle
3
Product Gallery Plug
N0304
Nut
Pg. 12
Union
N2403
Pg. 14
Pg. 17
Port Connector
N2431
N2440
Pg. 20
Pg. 14
Socket Weld Male Connector
N2426
N0319-B
Front Ferrule
Pg. 12
Male Connector
N2403
Female Gage Adapter
N2404
Pg. 20
N2427
Pg. 15
N2405
Pg. 18
N2428
Reducing Port Connector
Union Elbow
N2440
N2500
Pg. 20
Socket Weld Male Elbow
Male Branch Tee
N2503
N2525
N2526
N2601
N2603
Pg. 25
Bulkhead Union Elbow
N2701-LN
Pg. 29
Positionable Male Elbow
N6801
Pg. 31
Pg. 23
Male Run Tee
N2605 Bulkhead Female Connector
N2705-LN
N2606
Pg. 27
Pg. 29 N2706-LN
Pg. 32
Pg. 30
Positionable Male Branch Tee
N6803
Pg. 15
Pg. 32
N2650
N0319-S
Male Connector (JIC)
Pg. 13
Reducer
N2406
Pg. 18
N2429
Pg. 16 N2408
N2501
N2602
Pg. 21
N2700-LN
Pg. 30
Positionable Male Run Tee
N6804
Pg. 33
N2709-LN
B r e n n a n I n d u st r ies Atlanta • Cleveland • Dallas • Los Angeles • Seattle
Pg. 22
Union Tee
Pg. 28 N2700-LN
Pg. 25
Pg. 29
O-Seal Male Connector
Pg. 30 N6400
BSPP Male Connector
N7002
Pg. 19
Bulkhead Reducing Union
Bulkhead Male Connector Bulkhead Reducer (JIC)
N2707-LN
N2502
Pg. 24 N2603
Bulkhead Union
Pg. 28
Pg. 17
Female Elbow
Female Branch Tee
Pg. 24
Pg. 13
Female Adapter
Pg. 19 N2430
Male Elbow
Pg. 21
N2402 Cap
O-Seal Male Adapter
Cross
Bulkhead Male Connector
45 Degree Pos. Male Elbow
N6802
Pg. 23
Female Run Tee
Pg. 27
Pg. 13
Male Adapter
Butt Weld Male Elbow
Pg. 22
Ferrule Set
Female Connector
Adapter
Pg. 18
N0319-F
45 Degree Male Elbow
Reducing Union Tee
4
Pg. 12
Reducing Union
Butt Weld Male Connector
N2425
N0318
Back Ferrule
Pg. 33
Pg. 31
Contents n Interchangeability n Brennan Double-Ferrule Tube Fittings n Product Gallery n
T ubing Selection - Tubing Hardness - Tubing Wall Thickness - Tubing For Gas Service - Tubing Handling
n Tubing Specifications n Tubing-Working Pressure Tables n Thread Specifications n Assembly n Pre-Swaging n Brennan’s Gap Inspections Gages n Ordering Codes n Fitting Type Designators n Sizing Chart n Cross Reference Chart
B r e n n a n I n d u st r ies Atlanta • Cleveland • Dallas • Los Angeles • Seattle
5
Tubing Selection Proper selection, handling and installation of tubing are essential for reliable tubing system performance. While Brennan Industries is not a tubing manufacturer or supplier, we must stress the importance of carefully selecting high-quality tubing. Proper tubing selection is necessary to ensure safe and leak-free systems. Brennan Industries is happy to assist in tubing selection upon request. Tubing selection is based on the material, hardness, wall thickness and surface finish. The ASTM specifications for various tubes cover material, hardness and wall thickness. They do not give details on the surface finish. Tubing Hardness Tubing must always be softer than the fitting material. To achieve leak-free connections, it is important to use the recommended tubing hardness as explained in the Tubing Specifications section, leak-free connections will be achieved. The biggest misunderstanding about tubing hardness is in the area of stainless steel tubing. Brennan’s Stainless Steel Double-Ferrule Tube Fittings have been tested successfully with tubing hardness up to RB 90, the maximum hardness allowable under ASTM A 213 and A 269. Although such tubing hardnesses are permissible and Brennan’s Double-Ferrule Tube Fittings will perform satisfactorily on them, they will not provide the maximum advantage and performance for tubes with hardnesses above RB 80. It is suggested that, when purchasing stainless steel tubes to ASTM A 213/A 269, you specify that the hardness of the tubes should not exceed RB 80. The best results are obtained where the stainless steel tubing hardness is in the range RB 70-74. Such tubing lowers installation costs because it is more easily bent and installed. Tubing installers should perform the full 1-1/4 turn after snug-tightening to ensure proper joints. This will provide the best performance and is especially true in the case of harder tubing where higher torque is required. RB 80 maximum hardness is a suggestion and not a restriction against the use of harder tubing. However, if the tubing hardness exceeds RB 90, special fittings should be considered. Tubing Wall Thickness The allowable pressure rating of tubing for the wide range of wall thickness is calculated from “S” values as specified by ANSI Code B 31.1. The range of tubing wall thicknesses varies from 0.028" to 0.109" in the inch OD series. These wall thicknesses are generally preferred for tube sizes up to 1". For higher tube sizes, these wall thicknesses may be increased to 0.125 and 0.167". Tubing For Gas Service For maximum safety and the prevention of surface defects in any gas system, it is recommended that tubing wall thicknesses are not less than those shown in this table: Tube O.D.
1/16" 1/8"
1/4"
5/16"
3/8"
1/2"
5/8"
3/4"
7/8"
1"
Suggested Minimum Wall Thickness
.028" .028"
.028"
.035
.035
.041
.052
.062
.073
.083
1-1/4" 1-1/2" .104
.125
2" .167
Light gases such as helium, hydrogen, nitrogen, etc. have very small molecules, which can escape through even the smallest leak path created by surface defects on the tubing. As the tube OD increases, so does the likelihood of a scratch or other surface defect interfering with proper sealing. For the most successful connection for gas service, all installation instructions should be followed carefully and the heavier permissible wall thickness of tubing should be selected. A heavy wall thickness resists ferrule action more than a thin wall thickness. This allows the ferrules to coin out minor surface imperfections. A thin wall tube will collapse, offering little resistance to ferrule action during assembly. This reduces the chance of coining out surface defects, which is essential for gas service. Tubing Handling Scratches on tube OD are a potential source of problems in leak-tight tubing systems. Good handling practices can greatly reduce scratches and protect tubing surface finishes. Tubing should never be dragged out of a tubing rack. Particularly in sizes 3/4" and larger, the weight of the tubing being retrieved is sufficient to gouge the OD if there are any burrs on the ends of the other tubes in the rack. Tubing should never be dragged across cement, asphalt, gravel or any other surface, which could scratch the surface and create potential leak paths.
6
B rends e n n aalways n I n d uThis st r ies Sharp tube cutters should be maintained and tube should be deburred. allows easier entrance of the tube into the fitting bore and helps to Atlanta • Cleveland • Dallas • Los Angeles • Seattle assure that the tubing will go all the way through the ferrules without damaging the ferrule’s sealing edge.
General Technical Tubing Specifications Carbon Steel Tubing Seamless, soft annealed carbon steel tubing to ASTM A 179, Din 2391 or equivalent. 4-1 safety factor considering tensile strength of 47,000 psi at room temperature. For higher temperature service, apply the reducing factors for elevated temperature operation as specified in Table 302.3 1A and 304.1.2 of the code for pressure piping in ANSI B31.3. Recommended tube hardness is RB 72 or less. The tubing should be suitable for bending and flaring and free of all surface defects and imperfections. Stainless Steel Tubing Seamless, annealed 304 or 316 Stainless Steel tubing to ASTM A 269 or A 213 or equivalent. 4-1 safety factor considering tensile strength of 75,000 psi at room temperature. Tube hardness should not exceed RB 80. The preferable hardness range is RB 70-74. Tubing should be suitable for bending and flaring, and should be free of any surface defects and imperfections. A derating factor must be used for drawn and welded tubing. Copper Tubing Annealed, soft, seamless copper tubing to ASTM B 75 or equivalent. 5-1 safety factor considering tensile strength of 30,000 psi at room temperature. Maximum hardness of the tubing is not to exceed RB 50. Preferred hardness range is RB 40-45.
Tubing–Working Pressure Tables Maximum Allowable Working Pressure Tables Table #1: Stainless Steel Tubing TUBE Wall Thickness of Tube (inches) OD (In) 0.01 0.012 0.016 0.02 0.028 0.035 0.049 0.065 0.083 0.095 0.109 0.120 0.134 0.156 1/16 5,587 6,861 9,593 12,185 1/8 8,565 10,829 Working Pressure (psig) 3/16 5,474 7,039 10,116 1/4 4,020 5,132 7,500 10,135 5/16 4,037 5,848 8,071 3/8 3,326 4,791 6,566 1/2 2,611 3,741 5,092 6,696 5/8 2,951 3,998 5,225 6,075 3/4 2,436 3,289 4,283 4,966 5,785 7/8 2,073 2,793 3,628 4,199 4,881 1 1,804 2,427 3,146 3,637 4,220 4,688 1 1/4 2,485 2,867 3,321 3,682 4,149 4,900 1 1/2 2,046 2,358 2,726 3,020 3,398 4,003 The Allowable working pressures for 304 SS or 316 SS seamless tubing to ASTM A269-04 or equivalent based on the following data: Temperature: –20°F to 100°F; Ultimate Tensile Strength: 75,000 psi; Allowable stress: 20,000 psi as specified by ASME B31.3-2002. Table #2: Copper Tubing TUBE Wall Thickness of Tube (inches) OD (In) 0.028 0.035 0.049 0.065 0.083 0.095 0.109 0.120 1/8 2,789 3,772 3/16 1,795 2,328 3,600 Working Pressure (psig) 1/4 1,306 1,681 2,550 3,624 5/16 1,314 1,973 2,767 3/8 1,078 1,608 2,237 1/2 791 1,172 1,615 2,145 5/8 920 1,262 1,667 1,956 3/4 748 1,025 1,342 1,572 1,850 7/8 634 868 1,133 1,326 1,556 1 550 752 981 1,146 1,343 1,486 1 1/4 771 900 1,052 1,163 1 1/2 635 740 878 954 B r e n n a n
0.134
0.148
0.165
0.18
0.22
1,320 1,082
1,481 1,212
1,656 1,353
1,836 1,497
2,308 1,873
I n d u st r ies
Cleveland • Dallas Los Angeles • Seattle The Allowable working pressures for copper seamlessAtlanta tubing to• ASTM B75-02, ASTM• B251 or equivalent based on the following data: Temperature: –20°F to 100°F; Ultimate Tensile Strength: 30,000 psi; Allowable stress: 6,000 psi as specified by ASME B31.3-2002.
7
Tubing–Working Pressure Tables...Continued Table #3: Carbon Steel Tubing TUBE Wall Thickness of Tube (inches) OD (In) 0.028 0.035 0.049 0.065 0.083 0.095 0.109 0.120 1/8 6,782 8,865 3/16 4,319 5,556 8,253 1/4 3,166 4,043 5,912 8,254 Working Pressure (psig) 5/16 3,177 4,604 6,356 3/8 2,615 3,769 5,167 1/2 2,051 2,940 4,003 5,265 5/8 1,623 2,318 3,140 4,106 4,774 3/4 1,912 2,583 3,364 3,901 4,545 7/8 1,627 2,193 2,848 3,297 3,833 1 1,415 1,904 2,469 2,855 3,314 3,681 1 1/4 1,504 1,946 2,246 2,601 2,885 1 1/2 1,607 1,853 2,143 2,374
0.134
0.148
0.165
0.180
0.22
3,251 2,672
3,624 2,974
4,086 3,347
4,501 3,681
5,650 4,599
The Allowable working pressures for carbon steel seamless tubing to ASTM A 822-90 or equivalent based on the following data: Temperature: –20°F to 100°F; Ultimate Tensile Strength: 47,000 psi; Allowable stress: 15,700 psi as specified by ASME B31.3-2002. Table #5: Stress Factor for Elevated Temperatures Carbon Stainless Steel Copper Steel Monel TEMP ASTM A-269 ASTM ASTM ASTM (°F) 304 316 B-75 A-179 B-165 100 1.00 1.00 1.00 1.00 1.00 Table #4: Monel Tubing 200 1.00 1.00 0.80 0.96 0.88 TUBE Wall Thickness of Tube (inches) 300 1.00 1.00 0.78 0.90 0.82 OD (In) 0.028 0.035 0.049 0.065 0.083 0.095 0.109 0.120 400 0.94 0.97 0.50 0.86 0.79 1/8 8,007 10,462 500 0.88 0.85 0.82 0.79 1/4 3,758 4,798 7,012 9,788 Working Pressure (psig) 600 0.82 0.85 0.77 0.79 3/8 3,109 4,479 6,139 700 0.80 0.82 0.73 0.79 1/2 2,298 3,288 4,470 5,867 800 0.76 0.80 0.59 0.68 3/4 2,269 3,064 3,989 4,625 5,389 900 0.73 0.78 0.41 0.43 1 1,682 2,263 2,933 3,390 3,934 4,370 1000 0.69 0.77 0.16 The Allowable working pressures for Monel Alloy 400 seamless tubing for ASTM B165-05 or equivalent based on the following data: Temperature: –20°F to 100°F; Ultimate Tensile Strength: 70,000 psi; Allowable stress: 18,700 psi as specified by ASME B31.3-2002.
To find the maximum allowable working pressure for various tubing materials at elevated temperatures, multiply the maximum allowable working pressure for the tube size and wall thickness found in Tables 1, 2 and 3 by the correct stress factor found in this Table.
Thread Specifications Brennan’s connectors have one or more tubing end connections and there are a variety of pipe threads for which Brennan’s Double-Ferrule Tube Fittings are available. Two of the most popular thread connections are the American National Pipe Thread (NPT) and the British Standard Pipe Threads (BSP). These threads meet the standards of individual countries as well as the codified ISO standards. All Brennan fittings with pipe threads or stud end threads conform to the specifications below: • American National Pipe Thread (NPT): Reference specification ASA B2.1; 1960 • ISO Parallel Pipe Thread (British Standard Pipe Thread): Reference specifications BS 2779, ISO 228/1, DIN 259, JISB 0202, IS 2643 • ISO Taper Pipe Thread (British Standard Pipe Taper Thread): Reference specifications BS 21, ISO 7/1, DIN 2999, JIS B0203, IS 554 • Unified National Pipe Threads: Reference specifications ASA B1.1; 1964
8
B r e n n a n I n d u st r ies Atlanta • Cleveland • Dallas • Los Angeles • Seattle
General Technical Assembly Brennan Tube Fittings are shipped completely assembled and finger-tightened. They are ready for immediate use. Disassembly before use can result in dirt or foreign material getting into the fitting, which can cause leaks. Brennan Tube Fittings are installed in three easy steps: Step 1 Insert the tubing into the Brennan Tube Fitting. Make sure that the tubing rests firmly on the shoulders of the fitting and that the nut is snug-tight. In this position, the tube does not rotate by hand. Step 2 Before tightening the Brennan nut, scribe the nut at the 9 o’clock position. Step 3 While holding the fitting body steady with a backup wrench, tighten the nut 1-1/4 turns*. Watch the scribe mark and make one complete revolution. Then continue turning to the 12 o’clock position. * For 1/8" and 3/16" size tube fittings, only 3/4 turns from finger-tight is required. Reassembly Instructions Insert tube into fitting body and hand tighten. Using wrench, rotate the nut approximately 1/4 turn to original 1-1/4 turns position. Then snug slightly with wrench.
Pre-Swaging Sometimes, Brennan Tube Fittings must be installed in cramped quarters or overhead where ladders must be used. It is usually advantageous to use a pre-swaging tool on the tubing in an open ground area, thus pre-swaging the ferrules onto the tubing. The tubing is then removed from the pre-swaging tool. The tubing (with nut and pre-swaged ferrules) can now be attached to the fitting merely by following the reassembly instructions. Step1 Assemble the Brennan nut and ferrules to the pre-swaging tool. Insert the tubing until it bottoms out in the fitting body. Then tighten the nut 1-1/4 turns. Step 2 Loosen the nut and remove the tubing with the pre-swaged ferrules from the pre-swaging tool. Step 3 The connection can now be made simply by snug-tightening the nut as described in the retightening instructions. Brennan hydraulic swaging units are now available in 1/2", 5/8", 3/4" and 1" sizes. For further information, consult your local Brennan sales and service representative.
Brennan Gap Inspection Gages Brennan Gap Inspection Gages are designed to assure that a fitting has been sufficiently pulled up. They are particularly useful in systems where fittings are to be tightened in difficult or inaccessible locations, as well as systems where insufficient pull-up could cause potentially dangerous or expensive consequences. Brennan Gap Inspection Gages are inserted between the nut and body of a tube fitting after make-up. If the gage will fit in the gap between the nut and body hex, the fitting nut has not been sufficiently tightened. Gap inspection gages cannot distinguish the overtightening of a fitting from proper make-up. Gap inspection gages should be used only for initial make-ups and are not to be used in subsequent remake assemblies. B r e n n a n I n d u st r ies Atlanta • Cleveland • Dallas • Los Angeles • Seattle
NOTE: Brennan has a dynamic Research & Development program for the development of fittings in different materials, higher pressures and temperatures. The dimensions and information given in this catalog are subject to change without notice as a result of this research and development.
9
Ordering Codes Example
N2404–04–04–SS Fitting Type (Male Connector)
Tube O.D. in sixteenths of an inch 1/4" O.D.
Pipe Size in sixteenths of an inch 1/4" NPT
Material SS = stainless steel, type 316 B = brass
• The largest tube end size is first. The smaller tube end or pipe thread size follows. • Additional fitting materials and thread specifications are available upon request. NOTE: No suffix is required for Carbon Steel fittings.
Fitting Type Designators Designator
Description
Designator
Description
N0304 N0318 N0319-B N0319-F N0319-S N2402 N2403 N2403 N2404 N2405 N2406 N2408 N2425 N2426 N2427 N2428 N2429 N2430 N2431 N2440 N2440 N2500 N2501 N2502
Plug Nut Back Ferrule Front Ferrule Ferrule Set Male Connector (JIC) Union Reducing Union Male Connector Female Connector Reducer Cap Butt Weld Male Connector Socket Weld Male Connector Male Adapter (JIC) Male Adapter (NPT) O-Seal Male Adapter Female Adapter Female Gage Adapter Port Connector Reducing Port Connector Union Elbow Male Elbow Female Elbow
N2503 N2525 N2526 N2601 N2602 N2603 N2603 N2605 N2606 N2650 N2700-LN N2700-LN N2701-LN N2705-LN N2706-LN N2707-LN N2709-LN N6400 N6801 N6802 N6803 N6804 N7002
45 Degree Male Elbow Butt Weld Male Elbow Socket Weld Male Elbow Male Branch Tee Female Branch Tee Union Tee Reducing Union Tee Male Run Tee Female Run Tee Cross Bulkhead Union Bulkhead Reducing Union Bulkhead Union Elbow Bulkhead Female Connector Bulkhead Male Connector (NPT) Bulkhead Male Connector (JIC) Bulkhead Reducer O-Seal Male Connector 90˚ Positionable Male Elbow 45˚ Degree Positionable Male Elbow 90˚ Positionable Male Branch Tee Positionable Male Run Tee BSPP Male Connector
• Additional Fitting Types Are Available Upon Request.
10
B r e n n a n I n d u st r ies Atlanta • Cleveland • Dallas • Los Angeles • Seattle
General Technical Sizing Chart Tube-To-Pipe or Tube-To-Tube Size Tube Pipe Thread No. O.D. or Tube O.D.
1-1 1-2 2-1 2-2 2-4 3-2 3-4 4-2 4-4 4-6 4-8 5-2 5-4 6-2 6-4 6-6 6-8 8-4 8-6 8-8 8-12 10-6 10-8 10-12 12-8 12-12 14-12 14-16 16-12 16-16 20-20 24-24 32-32
1/16 1/16 1/8 1/8 1/8 3/16 3/16 1/4 1/4 1/4 1/4 5/16 5/16 3/8 3/8 3/8 3/8 1/2 1/2 1/2 1/2 5/8 5/8 5/8 3/4 3/4 7/8 7/8 1 1 1-1/4 1-1/2 2
1/16 1/8 1/16 1/8 1/4 1/8 1/4 1/8 1/4 3/8 1/2 1/8 1/4 1/8 1/4 3/8 1/2 1/4 3/8 1/2 3/4 3/8 1/2 3/4 1/2 3/4 3/4 1 3/4 1 1-1/4 1-1/2 2
• Additional sizes are available upon request.
B r e n n a n I n d u st r ies Atlanta • Cleveland • Dallas • Los Angeles • Seattle
11
Plug N0304
Part T Tube G No. OD A/F N0304-01 N0304-02 N0304-04 N0304-05 N0304-06 N0304-08 N0304-10 N0304-12 N0304-14 N0304-16 N0304-20 N0304-24 N0304-32
1/16 1/8 1/4 5/16 3/8 1/2 5/8 3/4 7/8 1 1-1/4 1-1/2 2
8 11 14 16 17 22 25 28.5 32 38 50 57 76
Special Installation Instructions For Adapters And Plugs From finger-tight, tighten nut 1/4 turn only. Further connections are made by wrench tightening slightly after snugging nut by hand.
Nut N0318
Part T Tube G No. OD L A/F N0318-01 N0318-02 N0318-04 N0318-05 N0318-06 N0318-08 N0318-10 N0318-12 N0318-14 N0318-16 N0318-20 N0318-24 N0318-32
1/16 1/8 1/4 5/16 3/8 1/2 5/8 3/4 7/8 1 1-1/4 1-1/2 2
8.0 12.0 12.7 14.0 14.5 17.5 17.5 17.5 17.5 20.6 31.8 38.0 52.5
8 11 14 16 17 22 25 28.5 32 38 50 57 76
Back Ferrule N0319-B Part T Tube No. OD N0319-B-01 N0319-B-02 N0319-B-04 N0319-B-05 N0319-B-06 N0319-B-08 N0319-B-10 N0319-B-12 N0319-B-14 N0319-B-16 N0319-B-20 N0319-B-24 N0319-B-32
12
1/16 1/8 1/4 5/16 3/8 1/2 5/8 3/4 7/8 1 1-1/4 1-1/2 2 B r e n n a n I n d u st r ies Atlanta • Cleveland • Dallas • Los Angeles • Seattle
Double-Ferrule Tube Fittings Front Ferrule N0319-F Part T Tube No. OD N0319-F-01 N0319-F-02 N0319-F-04 N0319-F-05 N0319-F-06 N0319-F-08 N0319-F-10 N0319-F-12 N0319-F-14 N0319-F-16 N0319-F-20 N0319-F-24 N0319-F-32
1/16 1/8 1/4 5/16 3/8 1/2 5/8 3/4 7/8 1 1-1/4 1-1/2 2
Ferrule Set N0319-S Part T Tube No. OD N0319-S-01 N0319-S-02 N0319-S-04 N0319-S-05 N0319-S-06 N0319-S-08 N0319-S-10 N0319-S-12 N0319-S-14 N0319-S-16 N0319-S-20 N0319-S-24 N0319-S-32
1/16 1/8 1/4 5/16 3/8 1/2 5/8 3/4 7/8 1 1-1/4 1-1/2 2
Male Connector (JIC) N2402 Tube X Male JIC
Part T Tube No. OD
Tube Flare ØE F G Male Size A min. C D A/F A/F H JIC
N2402-01-02 N2402-02-02 N2402-02-04 N2402-04-04 N2402-05-05 N2402-06-04 N2402-06-06 N2402-08-08 N2402-12-12 N2402-16-16
1/8 1/8 1/4 1/4 5/16 1/4 3/8 1/2 3/4 1
1/16 1/8 1/8 1/4 5/16 3/8 3/8 1/2 3/4 1
27.2 32.3 35.1 37.6 38.4 39.6 39.6 46.0 53.3 61.5
1.3 1.5 2.3 4.3 5.8 4.3 7.1 9.9 15.5 21.3
11.0 15.3 15.3 17.8 18.5 19.3 19.3 21.8 21.8 26.4
8.6 12.7 12.7 15.3 16.3 16.8 16.8 22.9 24.4 31.2
11 11 14 14 14 16 16 22 28.5 35
8 11 11 14 16 17 17 22 28.5 38
B r e n n a n I n d u st r ies Atlanta • Cleveland • Dallas • Los Angeles • Seattle
23.4 25.7 28.5 30.2 31.0 32.3 32.3 35.8 43.2 49.3
5/16-24 5/16-24 7/16-20 7/16-20 1/2-20 7/16-20 9/16-18 3/4-16 1-1/16-12 1-5/16-12
13
Union N2403 Tube x Tube
Part T Tube No. OD A N2403-01-01 N2403-02-02 N 2403-04-04 N2403-05-05 N2403-06-06 N2403-08-08 N2403-10-10 N2403-12-12 N2403-14-14 N2403-16-16 N2403-20-20 N2403-24-24 N2403-32-32
1/16 1/8 1/4 5/16 3/8 1/2 5/8 3/4 7/8 1 1-1/4 1-1/2 2
25.1 35.6 40.9 42.9 45.0 51.3 52.0 53.6 55.2 64.8 92.2 108.0 149.4
E F G C D min. A/F A/F H 11.0 15.3 17.8 18.5 19.3 21.8 21.8 21.8 21.8 26.4 38.9 45.2 62.7
8.6 12.7 15.3 16.3 16.8 22.9 24.4 24.4 25.9 31.2 41.2 50.0 67.6
1.3 2.4 4.8 6.3 7.1 10.4 12.7 15.8 18.2 22.3 27.6 34.0 46.0
8 11 14 14 16 22 24 27 30 35 46 55 70
8 11 14 16 17 22 25 28.5 32 38 50 57 76
17.5 22.4 26.2 28.2 30.2 31.0 31.8 33.3 34.8 40.4 48.0 53.6 74.7
Reducing Union N2403 Tube x Tube
Part T Tube No. OD N2403-04-02 N2403-05-02 N2403-05-04 N2403-06-02 N2403-06-04 N2403-08-02 N2403-08-04 N2403-08-06 N2403-10-06 N2403-10-08 N2403-12-04 N2403-12-06 N2403-12-08 N2403-16-08 N2403-16-12 N2403-20-16 N2403-24-20
14
1/4 5/16 5/16 3/8 3/8 1/2 1/2 1/2 5/8 5/8 3/4 3/4 3/4 1 1 1-1/4 1-1/2
Tx Tube OD 1/8 1/8 1/4 1/8 1/4 1/8 1/4 3/8 3/8 1/2 1/4 3/8 1/2 1/2 3/4 1 1-1/4
E F A C Cx D Dx min. A/F 38.6 39.6 42.2 40.9 43.2 45.2 47.0 48.5 49.3 52.0 49.3 50.8 53.6 60.5 60.5 92.2 60.5
17.8 18.6 18.6 19.3 19.3 21.8 21.8 21.8 21.8 21.8 21.8 21.8 21.8 26.5 26.5 38.9 26.5
15.3 15.3 17.8 15.3 17.8 15.3 17.8 19.3 19.3 21.8 17.8 19.3 21.8 21.8 21.8 26.4 21.8
15.3 16.3 16.3 16.8 16.8 22.9 22.9 22.9 24.4 24.4 24.4 24.4 24.4 31.2 31.2 41.2 31.2
12.7 12.7 15.3 12.7 15.3 12.7 15.3 16.8 16.8 22.9 15.3 16.8 22.9 22.9 24.4 31.2 24.4
2.4 2.4 4.8 2.4 4.8 2.4 4.8 7.1 7.1 10.4 4.8 7.1 10.4 10.4 15.8 22.3 15.8
B r e n n a n I n d u st r ies Atlanta • Cleveland • Dallas • Los Angeles • Seattle
14 14 14 16 16 22 22 22 24 24 27 27 27 35 35 45 55
G Gx A/F A/F H 14 16 16 17 17 22 22 22 25 25 28.5 28.5 28.5 38 38 50 57
11 11 14 11 14 11 14 17 17 22 14 17 22 22 28.5 38 50
24.6 25.7 27.5 26.9 28.5 28.5 29.5 31.0 31.8 31.8 31.8 33.3 33.3 38.1 38.1 48.0 53.6
Double-Ferrule Tube Fittings Male Connector N2404 Tube x Male NPT Threads
Part T Tube No. OD
P NPT Male
N2404-01-01 N2404-01-02 N2404-02-02 N2404-02-04 N2404-04-02 N2404-04-04 N2404-04-06 N2404-04-08 N2404-05-04 N2404-06-02 N2404-06-04 N2404-06-06 N2404-06-08 N2404-08-04 N2404-08-06 N2404-08-08 N2404-08-12 N2404-08-16 N2404-10-06 N2404-10-08 N2404-12-08 N2404-12-12 N2404-12-16 N2404-14-12 N2404-16-08 N2404-16-12 N2404-16-16 N2404-20-16 N2404-20-20 N2404-24-24 N2404-32-32
1/16 1/8 1/8 1/4 1/8 1/4 3/8 1/2 1/4 1/8 1/4 3/8 1/2 1/4 3/8 1/2 3/4 1 3/8 1/2 1/2 3/4 1 3/4 1/2 3/4 1 1 1-1/4 1-1/2 2
1/16 1/16 1/8 1/8 1/4 1/4 1/4 1/4 5/16 3/8 3/8 3/8 3/8 1/2 1/2 1/2 1/2 1/2 5/8 5/8 3/4 3/4 3/4 7/8 1 1 1 1-1/4 1-1/4 1-1/2 2
E F G A B C D min. A/F A/F 23.9 26.2 30.5 35.6 32.8 37.8 38.4 44.7 38.6 35.3 39.8 39.8 41.2 43.4 43.4 49.0 50.5 57.1 44.2 49.0 50.5 50.5 57.1 50.5 57.4 57.4 62.2 77.2 77.2 88.9 113.5
9.6 9.6 9.6 14.3 9.6 14.3 14.3 19.1 14.3 9.6 14.3 14.3 19.1 14.3 14.3 19.1 19.1 23.8 14.3 19.1 19.1 19.1 23.8 19.1 19.1 19.1 23.8 23.8 23.8 26.2 26.9
11.0 11.0 15.3 15.3 17.8 17.8 17.8 17.8 18.5 19.3 19.3 19.3 19.3 21.8 21.8 21.8 21.8 21.8 21.8 21.8 21.8 21.8 21.8 21.8 26.4 26.4 26.4 38.9 38.9 45.2 62.7
8.6 8.6 12.7 12.7 15.3 15.3 15.3 15.3 16.3 16.8 16.8 16.8 16.8 22.9 22.9 22.9 22.9 22.9 24.4 24.4 24.4 24.4 24.4 26.0 31.2 31.2 31.2 41.2 41.2 50.0 67.6
1.3 1.3 2.4 2.4 4.8 4.8 4.8 4.8 6.3 4.8 7.1 7.1 7.1 7.1 9.6 10.4 10.4 10.4 9.6 10.4 10.4 15.8 15.8 15.8 10.4 15.8 22.3 22.3 27.6 34.0 46.0
8 14 11 14 14 14 19 22 14 16 16 19 22 22 22 22 27 35 24 24 27 27 35 30 35 35 35 46 46 55 70
8 8 11 11 14 14 14 14 16 17 17 17 17 22 22 22 22 22 25 25 28.5 28.5 28.5 32 38 38 38 50 50 57 76
H 20.0 22.4 23.9 29.0 25.4 30.5 31.0 37.4 31.2 27.9 32.5 32.5 38.9 33.3 33.3 38.9 40.4 47.0 34.0 38.9 40.4 40.4 47.0 40.4 45.2 45.2 50.0 55.2 55.2 61.7 76.2
Bored-Through Connectors available in all of these sizes. Add suffix “BT” to the above part numbers to designate bored-through male connector.
Female Connector N2405 Tube x Female NPT Threads Part T Tube No. OD N2405-01-01 N2405-01-02 N2405-02-02 N2405-02-04 N 2405-04-02 N2405-04-04 N2405-04-06 N2405-04-08 N2405-05-02 N2405-05-04 N2405-06-02 N2405-06-04 N2405-06-06 N2405-06-08 N2405-08-04
1/16 1/16 1/8 1/8 1/4 1/4 1/4 1/4 5/16 5/16 3/8 3/8 3/8 3/8 1/2
P NPT Female 1/16 1/8 1/8 1/4 1/8 1/4 3/8 1/2 1/8 1/4 1/8 1/4 3/8 1/2 1/4
E F G A B C D min. A/F A/F 23.6 24.4 28.7 33.6 31.2 35.8 37.6 42.4 32.0 36.8 32.8 37.6 39.1 43.9 40.4
9.9 10.4 10.4 15.0 9.9 15.0 15.0 19.8 10.4 15.0 10.4 15.0 15.0 19.8 15.0
11.0 11.0 15.3 15.3 17.8 17.8 17.8 17.8 18.5 18.5 19.3 19.3 19.3 19.3 21.8
8.6 8.6 12.7 12.7 15.3 15.3 15.3 15.3 16.3 16.3 16.8 16.8 16.8 16.8 22.9
B r e n n a n I n d u st r ies Atlanta • Cleveland • Dallas • Los Angeles • Seattle
1.3 1.3 2.4 2.4 4.8 4.8 4.8 4.8 6.3 6.3 7.1 7.1 7.1 7.1 10.4
11 14 14 19 14 19 22 27 14 19 16 19 22 27 22
8 8 11 11 14 14 14 14 16 16 17 17 17 17 22
H 19.8 20.6 22.1 26.9 23.9 28.5 30.2 35.0 24.6 29.5 25.4 30.2 31.8 36.6 30.2
15
Female Connector N2405 Tube x Female NPT Threads
Part T Tube No. OD N2405-08-06 N2405-08-08 N2405-08-12 N2405-10-06 N2405-10-08 N2405-12-08 N2405-12-12 N2405-14-12 N2405-16-12 N2405-16-16 N2405-20-20 N2405-24-24
1/2 1/2 1/2 5/8 5/8 3/4 3/4 7/8 1 1 1-1/4 1-1/2
P NPT Female 3/8 1/2 3/4 3/8 1/2 1/2 3/4 3/4 3/4 1 1-1/4 1-1/2
E F G A B C D min. A/F A/F 41.9 46.7 48.3 41.9 46.7 46.7 48.3 49.8 53.4 62.3 74.6 83.3
15.0 19.8 20.6 15.0 19.8 19.8 20.6 20.6 20.6 25.4 25.4 27.6
21.8 21.8 21.8 21.8 21.8 21.8 21.8 21.8 26.4 26.4 38.9 45.2
22.9 22.9 22.9 24.4 24.4 24.4 24.4 25.9 31.2 31.2 41.2 50.0
10.4 10.4 10.4 12.7 12.7 15.8 15.8 18.3 22.3 22.3 27.6 34.0
22 27 32 24 27 27 35 35 35 41 55 60
22 22 22 25 25 28.5 28.5 32 38 38 50 60
H 30.2 36.6 38.1 31.8 36.6 36.6 38.1 39.6 41.2 50.0 52.6 56.2
Reducer N2406 Tube x Machined Tube Stub
Part T Tube Tx Tube E F G No. OD OD A C D min. A/F A/F H N2406-02-02 N2406-02-04 N2406-04-02 N2406-04-04 N2406-04-06 N2406-04-08 N2406-05-06 N2406-05-08 N2406-06-04 N2406-06-06 N2406-06-08 N2406-08-04 N2406-08-06 N2406-08-08 N2406-08-12 N2406-08-16 N2406-10-12 N2406-10-14 N2406-12-08 N2406-12-16 N2406-16-20 N2406-16-24
16
1/8 1/8 1/4 1/4 1/4 1/4 5/16 5/16 3/8 3/8 3/8 1/2 1/2 1/2 1/2 1/2 10-12 10-12 3/4 12-16 16-20 16-24
1/8 1/4 1/8 1/4 3/8 1/2 3/8 1/2 1/4 3/8 1/2 1/4 3/8 1/2 3/4 1 3/4 7/8 1/2 1 1-1/4 1-1/2
33.5 36.0 36.8 39.1 40.6 46.3 41.9 46.5 41.4 43.2 48.5 45.0 46.7 52.3 53.8 60.2 54.6 56.2 54.6 62.5 80.5 89.2
15.3 15.3 17.8 17.8 17.8 17.8 18.6 18.6 19.3 19.3 19.3 21.8 21.8 21.8 21.8 21.8 21.8 21.8 21.8 21.8 26.4 26.4
12.7 12.7 15.3 15.3 15.3 15.3 16.3 16.3 16.8 16.8 16.8 22.9 22.9 22.9 22.9 22.9 24.4 24.4 24.4 24.4 31.2 31.2
2.0 4.8 2.0 4.8 4.8 4.8 6.3 6.3 7.1 7.1 7.1 4.8 7.1 9.9 10.4 10.4 12.7 12.7 9.9 15.8 22.3 22.3
B r e n n a n I n d u st r ies Atlanta • Cleveland • Dallas • Los Angeles • Seattle
11 11 14 14 14 14 14 14 16 16 16 22 22 22 22 22 24 24 27 27 35 41
11 11 14 14 14 14 16 16 17 17 17 22 22 22 22 22 25 25 28.5 28.5 38 38
26.9 29.5 29.5 31.8 33.3 38.9 34.6 40.2 34.0 35.8 41.2 34.8 36.6 42.2 43.7 50.0 44.5 46.0 44.5 52.3 68.3 77.0
Double-Ferrule Tube Fittings Cap N2408
Part T Tube F G No. OD A C D A/F A/F H N2408-01 N2408-02 N2408-04 N2408-05 N2408-06 N2408-08 N2408-10 N2408-12 N2408-14 N2408-16 N2408-20 N2408-24 N2408-32
1/16 1/8 1/4 5/16 3/8 1/2 5/8 3/4 7/8 1 1-1/4 1-1/2 2
13.0 20.0 23.4 24.4 25.7 29.2 30.0 31.5 34.0 38.4 53.3 64.5 88.6
11.0 15.3 17.8 18.5 19.3 21.8 21.8 21.8 21.8 26.4 38.9 45.2 62.7
8.6 12.7 15.3 16.3 16.8 22.9 24.4 24.4 25.9 31.2 41.2 50.0 67.6
11 11 14 16 17 22 24 27 35 35 46 55 70.0
8 11 14 16 17 22 25 28.5 32 38 50 57 76.0
11.2 13.5 16.0 17.0 18.3 19.0 19.8 21.4 23.9 26.2 31.2 37.4 49.3
Butt Weld Male Connector N2425 Tube x Male Pipe Weld
Part T Tube Pipe Weld No. OD Male N2425-02-02 N2425-04-02 N2425-04-04 N2425-05-02 N2425-05-04 N2425-06-04 N2425-06-06 N2425-06-08 N2425-08-06 N2425-08-08 N2425-08-12 N2425-10-08 N2425-12-12 N2425-16-16 N2425-20-20 N2425-24-24
1/8 1/4 1/4 5/16 5/16 3/8 3/8 3/8 1/2 1/2 1/2 5/8 3/4 1 1-1/4 1-1/2
1/8 1/8 1/4 1/8 1/4 1/4 3/8 1/2 3/8 1/2 3/4 1/2 3/4 1 1-1/4 1-1/2
A 30.5 32.8 37.8 34.0 38.6 39.9 39.9 46.3 43.4 49.0 50.5 49.0 50.5 62.2 77.2 88.9
E F G B C D min. A/F A/F H 9.6 9.6 14.3 9.6 14.3 14.3 14.3 19.1 14.3 19.1 19.1 19.1 19.1 23.8 23.8 26.2
15.3 17.8 17.8 18.5 18.5 19.3 19.3 19.3 21.8 21.8 21.8 21.8 21.8 26.4 38.9 45.2
12.7 15.3 15.3 16.3 16.3 16.8 16.8 16.8 22.9 22.9 22.9 24.4 24.4 31.2 41.2 50.0
2.4 4.8 4.8 5.1 6.3 7.1 7.1 7.1 10.4 10.4 10.4 12.7 15.8 22.3 27.6 34
B r e n n a n I n d u st r ies Atlanta • Cleveland • Dallas • Los Angeles • Seattle
11 14 14 14 16 16 17 22 22 22 27 24 27 35 46 55
11 14 14 16 16 17 17 17 22 22 22 25 29 38 50 60
23.9 25.4 30.5 26.7 31.2 32.5 32.5 38.9 33.3 38.9 40.4 38.9 40.4 50.0 55.2 61.7
J 10.3 10.3 13.7 10.3 13.7 13.7 17.2 21.3 17.2 21.3 26.7 21.3 26.7 33.4 42.2 48.3
17
Socket Weld Male Connector N2426 Tube x Male Socket Weld
Part T Tube No. OD A N2426-02-02 N2426-04-04 N2426-06-06 N2426-08-08 N2426-12-12 N2426-16-16 N2426-20-20 N2426-24-24
1/8 1/4 3/8 1/2 3/4 1 1-1/4 1-1/2
E F G Bx C D min. A/F A/F H
B
29.0 33.5 37.6 41.2 43.4 52.6 72.4 81.8
8.6 10.4 12.0 12.0 12.0 14.3 19.1 19.1
6.4 7.9 9.6 12.7 14.3 19.1 19.1 23.8
15.3 17.8 19.3 21.8 21.8 26.4 38.9 45.2
12.7 5.3 16.8 22.9 24.4 31.2 41.2 50.0
2.4 4.8 7.1 10.4 15.8 22.3 27.6 34.0
11 14 16 22 27 35 45 55
11 14 17 22 28.5 38 50 57
J
22.9 26.2 30.3 31.0 33.3 40.4 50.3 54.6
7.9 11.2 15.8 19.1 26.7 33.3 42.0 50.0
Male Adapter N2427 Male JIC x Machined Tube Stub
Part No.
N2427-04-04 N2427-06-06 N2427-08-08 N2427-12-12 N2427-16-16
Flare Size 1/4 3/8 1/2 3/4 1
T Tube OD A 1/4 3/8 1/2 3/4 1
37.1 39.6 48.5 56.1 65.5
ØE
JIC Male
F A/F
4.8 7.1 9.9 15.0 20.3
7/16-20 9/16-18 3/4-16 1-1/16-12 1-5/16-12
14 16 22 28.5 35
Male Adapter N2428 Male NPT Threads x Machined Tube Stub
Part P NPT T Tube E F No. Male OD A B min. A/F N2428-02-02 N2428-02-04 N2428-04-02 N2428-04-04 N2428-04-06 N2428-04-08 N2428-05-04 N2428-06-04 N2428-06-06 N2428-06-08 N2428-08-04 N2428-08-06 N2428-08-08 N2428-10-08 N2428-12-08 N2428-12-12 N2428-16-12 N2428-16-16 N2428-20-20 N2428-24-24
18
1/8 1/8 1/4 1/4 1/4 1/4 5/16 3/8 3/8 3/8 1/2 1/2 1/2 5/8 3/4 3/4 1 1 1-1/4 1-1/2
1/8 1/4 1/8 1/4 3/8 1/2 1/4 1/4 3/8 1/2 1/4 3/8 1/2 1/2 1/2 3/4 3/4 1 1-1/4 1-1/2
29.5 34.8 31.8 37.0 37.8 43.4 38.1 38.9 39.6 45.2 44.5 45.2 50.8 52.3 52.3 52.3 58.7 66.0 80.3 94.5
9.6 14.4 9.6 14.3 14.3 19.1 14.3 14.3 14.3 19.1 14.3 14.3 19.1 19.1 19.1 19.1 19.1 23.8 23.8 26.2
B r e n n a n I n d u st r ies Atlanta • Cleveland • Dallas • Los Angeles • Seattle
4.8 7.1 4.8 4.8 4.8 4.8 6.3 7.1 7.1 7.1 7.1 9.9 9.9 11.9 11.9 15.0 15.7 20.3 27.6 33.2
11 14 11 14 19 22 14 14 19 22 14 19 22 22 22 27 27 35 45 55
Double-Ferrule Tube Fittings O-Seal Male Adapter N2429 Male Straight Threads x Machined Tube Stub
Part S UNF T Tube E Fd O Ring No. Male Male A B min. F A/F Part No. N2429-02-02 N2429-04-04 N2429-05-05 N2429-06-06 N2429-08-08 N2429-12-12 N2429-16-16 N2429-20-20 N2429-24-24
1/8 1/4 5/16 3/8 1/2 3/4 1 1-1/4 1-1/2
5/16-24 7/16-24 1/2-24 9/16-24 3/4-24 1-1/16-12 1-5/16-12 1-5/8-12 1-7/8-12
32.5 39.2 41.7 43.2 49.5 55.0 62.5 79.5 92.2
8.6 10.4 11.2 12.0 12.0 14.3 14.3 18.3 19.8
2.4 4.8 6.3 7.1 9.9 15.0 19.8 27.4 33.3
14 19 22 24 27 38 45 55 60
13.8 18.8 21.8 23.6 26.8 37.8 44.0 54.0 58.0
1 OPU 2 OPU 3 OPU 4 OPU 6 OPU 12 OPU 16 OPU 20 OPU 24 OPU
Female Adapter N2430
Female NPT Threads x Machined Tube Stub
Part P NPT T Tube E F No. Female OD A B min. A/F N2430-02-02 N2430-02-04 N2430-04-02 N2430-04-04 N2430-04-06 N2430-04-08 N2430-05-04 N2430-06-04 N2430-06-06 N2430-06-08 N2430-08-04 N2430-08-06 N2430-08-08 N2430-10-08 N2430-12-08 N2430-12-12 N2430-12-16 N2430-16-12 N2430-16-16 N2430-20-20 N2430-24-24
1/8 1/8 1/4 1/4 1/4 1/4 5/16 3/8 3/8 3/8 1/2 1/2 1/2 5/8 3/4 3/4 3/4 1 1 1-1/4 1-1/2
1/8 1/4 1/8 1/4 3/8 1/2 1/4 1/4 3/8 1/2 1/4 3/8 1/2 1/2 1/2 3/4 1 3/4 1 1-1/4 1-1/2
31.5 35.3 33.0 37.0 39.4 45.5 37.6 38.1 40.4 46.7 43.5 45.5 51.8 53.0 52.8 52.8 58.4 60.7 64.3 77.7 88.9
10.4 15.0 10.4 15.0 15.0 19.8 15.0 15.0 15.0 19.8 15.0 15.0 19.8 19.8 19.8 20.6 25.4 20.6 25.4 25.4 27.6
B r e n n a n I n d u st r ies Atlanta • Cleveland • Dallas • Los Angeles • Seattle
2.4 2.4 4.8 4.8 4.8 4.8 6.3 7.1 7.1 7.1 9.9 9.9 9.9 12.7 15.0 15.0 15.0 20.3 20.3 27.6 33.2
14 19 14 19 22 27 19 19 22 27 19 22 27 27 27 35 41 35 41 55 60
19
Female Gage Adapter N2431
Female ISO Parallel Threads (gage) x Machined Tube Stub
Part P ISO T Tube No. Female OD A N2431-04-04 N2431-06-06 N2431-08-08
1/4 3/8 1/2
1/4 3/8 1/2
E F B min. A/F a2 d4 b t2
35.3 39.4 45.7
13.0 14.2 18.8
4.8 6.6 7.1
19 24 27
1.6 1.6 1.6
5.8 – –
9.4 9.9 14.5
17.0 – –
No seal is made around the male thread. Instead, a gasket is dropped into the flat bottom in the female thread, and the end of the male threaded end exerts a load on the gasket to seal.
Port Connector N2440 Part T Tube No. OD B N2440-01-01 1/16 10.60 N2440-02-02 1/8 15.70 N2440-04-04 1/4 18.90 N2440-05-05 5/16 20.10 N2440-06-06 3/8 20.40 N2440-08-08 1/2 26.00 N2440-12-12 3/4 27.70 N2440-16-16 1 34.50
E min. H J 0.8 13.7 3.3 2.3 22.3 6.0 4.8 24.7 9.5 6.3 25.9 11.0 7.1 26.2 12.5 9.9 35.9 15.80 15.0 37.4 22 20.3 47.9 28.2
Reducing Port Connector N2440 Part No. N2440-02-01 N2440-04-01 N2440-04-02 N2440-06-02 N2440-06-04 N2440-08-04 N2440-08-06 N2440-12-08 N2440-16-08 N2440-16-12
20
T Tube OD 1/8 1/4 1/4 3/8 3/8 1/2 1/2 3/4 1 1
Tx Reduced Tube OD B Bx 1/16 8.6 2.0 1/16 8.6 3.6 1/8 13.5 3.3 1/8 13.5 3.8 1/4 15.7 3.3 1/4 15.7 3.8 3/8 17.5 3.3 1/2 23.1 3.8 1/2 24.4 4.8 3/4 25.9 4.1
E min. H 0.8 17.2 0.8 18.0 2.3 22.6 2.3 23.1 4.8 24.8 4.8 29.4 7.1 30.7 9.9 36.6 9.9 42.6 15.0 43.4
B r e n n a n I n d u st r ies Atlanta • Cleveland • Dallas • Los Angeles • Seattle
J 6.0 9.5 9.5 12.5 12.5 15.8 15.8 22.0 28.2 28.2
Double-Ferrule Tube Fittings Union Elbow N2500 Tube X Tube
Part T Tube E F No. OD A C D min. A/F G Hx N2500-01-01 N2500-02-02 N2500-04-04 N2500-05-05 N2500-06-06 N2500-08-08 N2500-10-10 N2500-12-12 N2500-14-14 N2500-16-16 N2500-20-20 N2500-24-24 N2500-32-32
1/16 1/8 1/4 5/16 3/8 1/2 5/8 3/4 7/8 1 1-1/4 1-1/2 2
17.8 22.4 26.9 28.7 30.5 36.0 38.1 39.9 44.7 49.0 66.6 78.0 107.2
11.0 15.3 17.8 18.5 19.3 21.8 21.8 21.8 21.8 26.4 38.9 45.2 62.7
8.6 12.7 15.3 16.3 16.8 22.9 24.4 24.4 25.9 31.2 41.2 50.0 67.6
1.3 2.4 4.8 6.3 7.1 10.4 12.7 15.8 18.2 22.3 27.6 34.0 46.0
11 11 14 16 17 22 24 27 35 35 46 55 70
8 11 14 16 17 22 25 28.5 32 38 50 57 76
14.0 15.8 19.6 21.3 23.2 25.9 27.9 29.7 34.6 36.8 44.5 50.8 69.9
Male Elbow N2501 Tube X Male NPT Thread
Part T Tube P NPT No. OD Male N2501-01-01 N2501-01-02 N2501-02-02 N2501-02-04 N2501-04-02 N2501-04-04 N2501-04-06 N2501-04-08 N2501-05-04 N2501-06-02 N2501-06-04 N2501-06-06 N2501-06-08 N2501-08-04 N2501-08-06 N2501-08-08 N2501-08-12 N2501-10-08 N2501-12-08 N2501-12-12 N2501-14-12 N2501-16-12 N2501-16-16 N2501-20-20 N2501-24-24 N2501-32-32
1/16 1/16 1/8 1/8 1/4 1/4 1/4 1/4 5/16 3/8 3/8 3/8 3/8 1/2 1/2 1/2 1/2 5/8 3/4 3/4 7/8 1 1 1-1/4 1-1/2 2
1/16 1/8 1/8 1/4 1/8 1/4 3/8 1/2 1/4 1/8 1/4 3/8 1/2 1/4 3/8 1/2 3/4 1/2 1/2 3/4 3/4 3/4 1 1-1/4 1-1/2 2
A 19.0 19.0 23.6 24.6 26.9 26.9 29.7 31.8 28.7 30.5 30.5 31.2 33.3 36.0 36.0 36.0 39.9 38.1 39.9 39.9 44.7 49.0 49.0 66.5 78.0 107.2
E F G B C D min. A/F A/F Hx 9.6 9.6 9.6 14.3 9.6 14.3 14.3 19.1 9.6 9.6 14.3 14.3 19.1 14.3 14.3 19.1 19.1 19.1 19.1 19.1 19.1 19.1 23.8 23.8 26.2 26.9
10.9 10.9 15.3 15.3 17.8 17.8 17.8 17.8 18.5 19.3 19.3 19.3 19.3 21.8 21.8 21.8 21.8 21.8 21.8 21.8 21.8 26.4 26.4 38.8 45.2 62.7
8.6 8.6 12.7 12.7 5.3 15.3 15.3 15.3 16.3 16.8 16.8 16.8 16.8 22.9 22.9 22.9 22.9 24.4 24.4 24.4 25.9 31.2 31.2 41.1 50.0 67.6
1.3 1.3 2.4 2.4 4.8 4.8 4.8 4.8 6.3 4.8 7.1 7.1 7.1 4.8 9.6 10.4 10.4 11.9 11.9 15.8 15.8 15.8 22.3 27.6 34.0 46.0
B r e n n a n I n d u st r ies Atlanta • Cleveland • Dallas • Los Angeles • Seattle
11 11 11 14 14 14 17 22 14 14 17 17 22 22 22 22 27 24 27 27 35 35 35 46 55 70
11 11 11 11 14 14 14 14 16 17 17 17 17 22 22 22 22 25 28.5 28.5 32 38 38 50 57 76
15.3 15.3 17.0 18.0 19.6 19.6 22.4 24.4 21.3 23.1 23.1 23.9 25.9 25.9 25.9 25.9 29.7 27.9 29.7 29.7 34.5 36.8 36.8 44.5 50.8 69.9
Hy 17.8 17.8 17.8 23.4 18.8 23.4 26.2 33.0 24.4 20.9 25.4 26.2 33.0 28.2 28.2 33.0 36.8 35.0 36.8 36.8 41.6 41.6 46.5 47.8 60.4 70.6
21
Female Elbow N2502 Tube x Female NPT Threads
Part T Tube P NPT No. OD Female N2502-02-02 N2502-02-04 N2502-04-02 N2502-04-04 N2502-04-06 N2502-04-08 N2502-05-02 N2502-05-04 N2502-06-02 N2502-06-04 N2502-06-06 N2502-06-08 N2502-08-04 N2502-08-06 N2502-08-08 N2502-10-06 N2502-10-08 N2502-12-08 N2502-12-12 N2502-14-12 N2502-16-12 N2502-16-16
1/8 1/8 1/4 1/4 1/4 1/4 5/16 5/16 3/8 3/8 3/8 3/8 1/2 1/2 1/2 5/8 5/8 3/4 3/4 7/8 1 1
1/8 1/4 1/8 1/4 3/8 1/2 1/8 1/4 1/8 1/4 3/8 1/2 1/4 3/8 1/2 3/8 1/2 1/2 3/4 3/4 3/4 1
A 24.6 27.4 26.9 29.7 31.8 34.6 28.7 30.5 30.5 31.2 33.3 36.0 36.0 36.0 38.9 38.1 39.9 39.9 44.7 44.7 49.0 53.6
E F G B C D min. A/F A/F Hx 10.4 15.0 10.4 15.0 15.0 19.8 10.4 15.0 10.4 15.0 15.0 19.8 15.0 15.0 19.8 15.0 19.8 19.8 20.6 20.6 20.6 25.4
15.3 15.3 17.8 17.8 17.8 17.8 17.8 18.5 19.3 19.3 19.3 19.3 21.8 21.8 21.8 21.8 21.8 21.8 21.8 21.8 26.4 26.4
12.7 12.7 15.3 15.3 15.3 15.3 15.3 16.3 16.8 16.8 16.8 16.8 22.9 22.9 22.9 22.9 24.4 24.4 24.4 25.9 31.2 31.2
2.4 2.4 4.8 4.8 4.8 4.8 6.3 6.3 7.1 7.1 7.1 7.1 7.1 10.4 10.4 12.7 12.7 15.8 15.8 18.2 22.3 22.3
14 19 14 19 22 27 19 22 17 19 22 27 22 22 27 24 27 27 35 35 35 41
11 11 14 14 14 14 14 16 17 17 17 17 22 22 22 22 25 28.5 28.5 32 38 38
18.0 20.8 19.6 22.4 24.4 27.2 21.4 23.2 23.2 23.9 25.9 28.7 25.9 25.9 28.7 28.0 29.7 29.7 34.6 34.6 36.8 41.4
Hy 19.0 22.4 19.0 22.4 22.4 28.5 19.1 22.4 19.1 22.4 22.4 28.5 22.4 22.4 28.5 22.4 28.5 28.5 31.8 31.8 31.8 38.1
45˚ Male Elbow N2503 Tube x Male NPT Threads
Part T Tube P NPT No. OD Male N2503-04-02 N2503-04-04 N2503-06-02 N2503-06-04 N2503-06-06 N2503-08-06 N2503-08-08 N2503-12-12 N2503-16-16
22
1/4 1/4 3/8 3/8 3/8 1/2 1/2 3/4 1
1/8 1/4 1/8 1/4 3/8 3/8 1/2 3/4 1
A 24.6 24.6 27.9 27.9 29.2 32.0 32.0 34.0 40.4
E F G B C D min. A/F A/F Hx 9.6 14.3 9.6 14.3 14.3 14.3 19.1 19.1 23.8
17.8 17.8 19.3 19.3 19.3 21.8 21.8 21.8 26.4
15.3 15.3 16.8 16.8 16.8 22.9 22.9 24.4 31.2
4.8 4.8 4.8 7.1 7.1 9.6 10.4 15.8 22.3
14 14 14 17 17 22 22 27 35
14 14 17 17 17 22 22 28.5 38
17.3 17.3 20.6 20.6 21.8 21.8 21.8 23.9 26.2
Hy 16.5 21.0 18.3 22.9 24.1 24.1 29.0 31.8 37.8
Double-Ferrule Tube Fittings Butt Weld Male Elbow N2525 Tube X 90˚ Male Pipe Weld
Part T Tube Pipe Weld No. OD Male N2525-04-02 N2525-04-04 N2525-06-04 N2525-08-08 N2525-12-12 N2525-16-16 N2525-20-20 N2525-24-24
1/4 1/4 3/8 1/2 3/4 1 1-1/4 1-1/2
1/8 1/4 1/4 1/2 3/4 1 1-1/4 1-1/2
A
E F G B C D min. A/F A/F Hx
27.0 27.0 30.5 36.0 39.9 49.0 66.5 78.0
9.6 14.3 14.3 19.1 19.1 23.8 23.8 26.2
17.8 17.8 19.3 21.8 21.8 26.4 38.9 45.2
15.3 15.3 16.8 22.9 24.4 31.2 41.2 50.0
4.8 4.8 7.1 10.4 15.8 22.3 27.6 34.0
14 14 16 22 27 35 45 50
14 14 17 22 29 38 50 57
19.6 19.6 23.1 25.9 29.7 36.8 44.5 50.8
Hy
J
18.8 23.4 25.9 33.0 36.8 46.5 47.8 60.5
10.3 13.7 13.7 21.3 26.7 33.4 42.2 48.3
Socket Weld Male Elbow N2526 Tube X 90˚ male Socket Weld
Part T Tube No. OD A
E F G Bx C D min. A/F A/F Hx Hy
N2526-04-04 N2526-06-06 N2526-08-08 N2526-12-12 N2526-16-16 N2526-20-20 N2526-24-24
7.9 9.6 12.7 14.3 19.1 19.1 23.8
1/4 3/8 1/2 34 1 1-1/4 1-1/2
27.0 30.5 36.0 39.9 49.0 66.5 78.0
17.8 19.3 21.8 21.8 26.4 38.9 45.2
15.3 16.8 22.9 24.4 31.2 41.2 50.0
4.8 7.1 10.4 15.8 22.3 27.6 34.0
14 16 22 27 35 45 50
B r e n n a n I n d u st r ies Atlanta • Cleveland • Dallas • Los Angeles • Seattle
14 17 22 28.5 38 50 57
19.6 23.1 25.9 29.7 36.8 44.5 50.8
19.6 23.1 25.9 29.7 36.8 47.8 60.4
K 12.7 15.8 20.6 27.0 35.0 43.0 48.0
23
Male Branch Tee N2601 Tube x Tube x Male NPT Threads
Part T Tube P NPT E No. OD Male A Ax B C D min. F
G H A/F A/F Hx Hy
N2601-02-02-02 N2601-02-02-04 N2601-04-04-02 N2601-04-04-04 N2601-04-04-06 N2601-04-04-08 N2601-06-06-04 N2601-06-06-06 N2601-06-06-08 N2601-08-08-04 N2601-08-08-06 N2601-08-08-08 N2601-10-10-08 N2601-12-12-08 N2601-12-12-12 N2601-16-16-12 N2601-16-16-16 N2601-20-20-20 N2601-24-24-24
11 11 14 14 14 14 17 17 17 22 22 22 25 29 29 38 38 50 57
1/8 1/8 1/4 1/4 1/4 1/4 3/8 3/8 3/8 1/2 1/2 1/2 5/8 3/4 3/4 1 1 1-1/4 1-1/2
1/8 1/4 1/8 1/4 3/8 1/2 1/4 3/8 1/2 1/4 3/8 1/2 1/2 1/2 3/4 3/4 1 1-1/4 1-1/2
47.2 49.2 53.8 53.8 59.4 63.6 61.0 62.4 66.0 72.0 72.0 72.0 76.2 79.8 79.8 98.0 98.0 133.0 156.0
23.6 24.6 26.9 26.9 29.7 31.8 30.5 31.2 33.0 36.0 36.0 36.0 38.1 39.9 39.9 49.0 49.0 66.5 78.0
9.6 14.3 9.6 14.3 14.3 19.1 14.3 14.3 19.1 14.3 14.3 19.1 19.1 19.1 19.1 19.1 23.8 23.8 26.2
15.3 15.3 17.8 17.8 17.8 17.8 19.3 19.3 19.3 21.8 21.8 21.8 21.8 21.8 21.8 26.4 26.4 38.8 45.2
12.7 12.7 15.3 15.3 15.3 15.3 16.8 16.8 16.8 22.9 22.9 22.9 24.4 24.4 24.4 31 31 41.1 50.0
2.4 2.4 4.8 4.8 4.8 4.8 7.1 7.1 7.1 4.8 9.6 10.4 11.9 11.9 15.8 15.8 22.3 27.6 34.0
11 14 14 14 17 22 17 17 22 22 22 22 22 27 27 35 35 46 55
34.0 36.0 39.2 39.2 44.8 44.8 46.2 47.8 51.8 51.8 51.8 51.8 55.8 59.4 59.4 73.6 73.6 89.0 101.6
17.0 18.0 19.6 19.6 22.4 24.4 23.1 23.9 25.9 25.9 25.9 25.9 27.9 29.7 29.7 36.8 36.8 44.5 50.8
17.8 23.4 18.8 23.4 26.2 33.0 25.4 26.2 33.0 28.2 28.2 33.0 35.0 36.8 36.8 41.6 46.5 47.6 60.4
Female Branch Tee N2602 Tube x Tube x Female NPT Threads
Part T Tube P NPT No. OD Female N2602-02-02-02 N2602-04-04-02 N2602-04-04-04 N2602-06-06-04 N2602-06-06-06 N2602-08-08-06 N2602-08-08-08 N2602-12-12-12 N2602-16-16-12 N2602-16-16-16
24
1/8 1/4 1/4 3/8 3/8 1/2 1/2 3/4 1 1
1/8 1/8 1/4 1/4 3/8 3/8 1/2 3/4 3/4 1
A 49.2 53.8 59.4 62.4 66.6 72.0 77.8 89.4 98.0 107.2
E F G Ax B C D min. A/F A/F 24.6 26.9 27.9 31.2 33.3 36.0 38.9 44.7 49.0 53.6
10.4 10.4 15.0 15.0 15.0 15.0 19.8 20.6 20.6 25.4
15.3 17.8 17.8 19.3 19.3 21.8 21.8 21.8 26.4 26.4
12.7 15.3 15.3 16.8 16.8 22.9 22.9 24.4 31.2 31.2
2.4 4.8 4.8 7.1 7.1 10.4 10.4 15.8 22.3 22.3
B r e n n a n I n d u st r ies Atlanta • Cleveland • Dallas • Los Angeles • Seattle
14 14 19 16 19 19 22 35 35 41
11 14 14 16 16 19 22 22 25 38
H
Hx
Hy
36.0 39.2 44.8 47.8 51.8 51.8 57.4 69.2 73.6 82.8
18.0 19.6 22.4 23.9 25.9 25.9 28.7 34.6 36.8 41.4
19.0 19.0 22.4 22.4 22.4 22.4 28.5 31.8 31.8 38.1
Double-Ferrule Tube Fittings Union Tee N2603 Tube x Tube x Tube
Part T Tube No. OD A N2603-01-01-01 N2603-02-02-02 N2603-04-04-04 N2603-05-05-05 N2603-06-06-06 N2603-08-08-08 N2603-10-10-10 N2603-12-12-12 N2603-14-14-14 N2603-16-16-16 N2603-20-20-20 N2603-24-24-24 N2603-32-32-32
1/16 1/8 1/4 5/16 3/8 1/2 5/8 3/4 7/8 1 1-1/4 1-1/2 2
E F G Ax C D min. A/F A/F H Hx
35.6 44.8 53.8 57.4 61.0 72.0 76.2 79.8 89.4 98.0 133.2 156.0 214.4
17.8 22.4 26.9 28.7 30.5 36.0 38.1 39.9 44.7 49.0 66.6 78.0 107.4
11.0 15.3 17.8 18.5 19.3 21.8 21.8 21.8 21.8 26.4 38.9 45.2 62.7
8.6 12.7 15.3 16.3 16.8 22.9 24.4 24.4 25.9 31.2 41.2 50.0 67.9
1.3 2.4 4.8 6.3 7.1 10.4 12.7 15.8 18.2 22.3 27.6 34.0 46.0
11 11 14 16 17 22 24 27 35 35 46 55 70
8 11 14 16 17 22 25 28.5 32 38 50 57 76
28.0 31.6 39.2 42.6 46.4 51.8 55.8 59.4 69.2 73.6 89.0 101.6 139.8
14.0 15.8 19.6 21.3 23.2 25.9 27.9 29.7 34.6 36.8 44.5 50.8 69.9
2
1
Reducing Union Tee N2603
3
Tube x Tube x Tube
1
2 3
Part T Tube Tx Tube No. OD OD N2603-06-06-04 N2603-08-08-04 N2603-08-08-06 N2603-12-12-06 N2603-12-12-08 N2603-16-16-06 N2603-16-16-08 N2603-16-16-12 N2603-20-20-16 N2603-24-24-16
3/8 1/2 1/2 3/4 3/4 1 1 1 1-1/4 1-1/2
1/4 1/4 3/8 3/8 1/2 3/8 1/2 3/4 1 1
E F Ax Ay C Cx D Dx min. A/F
A 61.0 72.2 72.2 79.8 79.8 98.0 98.0 98.0 135.6 157.5
30.5 36.0 36.0 39.9 39.9 49.0 49.0 49.0 67.8 78.7
29.0 31.8 33.3 37.0 39.9 41.9 44.7 44.7 55.1 60.0
19.3 21.8 21.8 21.8 21.8 26.4 26.4 26.4 38.9 44.7
17.8 17.8 19.3 19.3 21.8 19.3 22.9 24.4 26.4 26.4
16.8 22.9 22.9 24.4 24.4 31.2 31.2 31.2 41.2 50.0
15.3 15.3 16.8 16.8 22.9 16.8 21.8 24.4 31.2 31.2
4.8 4.8 7.1 7.1 10.4 7.1 10.4 15.8 22.3 22.3
16 22 22 27 27 35 35 35 46 55
G Gx A/F A/F H 17 22 22 28.5 28.5 38 38 38 50 57
14 14 17 17 22 17 22 28.5 38 38
46.2 51.8 51.8 59.4 59.4 73.6 73.6 73.6 91.4 103.2
Hx
Hy
23.1 25.9 25.9 29.7 29.7 36.8 36.8 36.8 45.7 51.6
21.6 24.4 25.9 29.7 29.7 34.5 34.5 34.5 42.9 47.8
continued on next page B r e n n a n I n d u st r ies Atlanta • Cleveland • Dallas • Los Angeles • Seattle
25
Reducing Union Tee N2603 Continued
2
1
Tube x Tube x Tube
3 Part T Tube Tx Tube No. OD OD N2603-06-04-06 N2603-08-04-08 N2603-08-06-08 N2603-12-06-12 N2603-12-08-12 N2603-16-06-16 N2603-16-08-16 N2603-16-12-16 N2603-20-16-20 N2603-24-20-24
3/8 1/2 1/2 3/4 3/4 1 1 1 1-1/4 1-1/2
1/4 1/4 3/8 3/8 1/2 3/8 1/2 3/4 1 1
E F Ax Ay C Cx D Dx min. A/F
A 59.4 67.7 69.3 77.0 79.8 98.9 93.7 93.7 119.6 150.9
30.5 36.0 36.0 39.9 39.9 49.0 49.0 49.0 67.8 78.7
29.0 31.7 33.3 37.1 39.9 41.9 44.7 44.7 53.0 72.9
19.3 21.8 21.8 21.8 21.8 26.4 26.4 26.4 38.9 45.2
17.8 17.8 19.3 19.3 21.8 19.3 21.8 21.8 26.4 38.9
16.8 22.9 22.9 24.4 24.4 31.2 31.2 31.2 41.2 50.0
15.3 15.3 16.8 16.8 22.9 16.8 21.8 24.4 31.2 41.3
4.8 4.8 7.1 7.1 10.4 7.1 10.4 15.8 18.2 27.6
Reducing Union Tee N2603 Continued
16 22 22 27 27 35 35 35 46 55
G Gx A/F A/F H 17 22 22 28.5 28.5 38 38 38 50 57
14 14 17 17 22 17 22 28.5 38 38
44.7 50.2 51.8 59.4 59.4 71.3 71.3 71.3 85.3 101.6
Hx
Hy
23.1 25.9 25.9 29.7 29.7 36.8 36.8 36.8 45.7 50.8
21.6 24.3 25.9 29.7 29.7 34.5 34.5 34.5 40.8 50.8
2
1
Tube x Tube x Tube
3 Part T Tube Tx Tube No. OD OD N2603-06-04-04 N2603-08-04-04 N2603-08-06-06 N2603-12-06-06 N2603-12-08-08 N2603-16-06-06 N2603-16-08-08 N2603-16-12-12 N2603-20-16-16 N2603-24-16-16
3/8 1/2 1/2 3/4 3/4 1 1 1 1-1/4 1-1/2
1/4 1/4 3/8 3/8 1/2 3/8 1/2 3/4 1 1
E F Ax Ay C Cx D Dx min. A/F
A 59.6 67.7 69.3 77.0 79.8 99.9 93.7 93.7 122.9 138.7
30.6 36.0 36.0 38.9 39.9 39.9 49.0 49.0 67.8 78.7
29.0 31.7 33.2 37.0 39.9 41.9 44.7 44.7 55.1 60.0
19.3 21.8 21.8 21.8 21.8 26.4 26.4 26.4 38.9 44.7
17.8 17.8 19.3 19.3 21.8 19.3 22.9 24.4 26.4 26.4
16.8 22.9 22.9 24.4 24.4 31.2 31.2 31.2 41.2 50.0
15.3 15.3 16.8 16.8 22.9 16.8 21.8 24.4 31.2 31.2
4.8 4.8 7.1 7.1 10.4 7.1 10.4 15.8 22.3 22.3
NOTE: The order of the sizes is as per the designation (1-2-3) in figure shown above.
26
B r e n n a n I n d u st r ies Atlanta • Cleveland • Dallas • Los Angeles • Seattle
16 22 22 27 27 35 35 35 46 50
G Gx A/F A/F H 17 22 22 28.5 28.5 38 38 38 50 57
14 14 17 17 22 17 22 28.5 38 38
44.8 50.2 51.8 59.4 59.4 71.3 71.3 71.3 88.6 99.4
Hx
Hy
23.2 25.9 25.9 29.7 29.7 36.8 36.8 36.8 45.7 51.6
21.6 24.3 25.9 29.7 29.7 34.5 34.5 34.5 42.9 47.8
Double-Ferrule Tube Fittings Male Run Tee N2605 Tube x Male NPT Threads x Tube Part T Tube P NPT No. OD Male N2605-02-02-02 N2605-02-04-02 N2605-04-02-04 N2605-04-04-04 N2605-04-06-04 N2605-04-08-04 N2605-06-04-06 N2605-06-06-06 N2605-06-08-06 N2605-08-04-08 N2605-08-06-08 N2605-08-08-08 N2605-10-08-10 N2605-12-08-12 N2605-12-12-12 N2605-16-12-16 N2605-16-16-16 N2605-20-20-20 N2605-24-24-24
1/8 1/8 1/4 1/4 1/4 1/4 3/8 3/8 3/8 1/2 1/2 1/2 5/8 3/4 3/4 1 1 1-1/4 1-1/2
1/8 1/4 1/8 1/4 3/8 1/2 1/4 3/8 1/2 1/4 3/8 1/2 1/2 1/2 3/4 3/4 1 1-1/4 1-1/2
A
E G Ax B C D min. F A/F
41.4 48.0 45.7 50.3 55.9 64.8 55.9 57.4 66.0 64.2 64.2 69.0 73.1 76.7 76.7 90.6 95.5 114.1 138.4
23.6 24.6 26.9 26.9 29.7 31.8 30.5 31.2 33.0 36.0 36.0 36.0 38.1 39.9 39.9 49.0 49.0 66.5 78.0
9.6 14.3 9.6 14.3 14.3 19.1 14.3 14.3 19.1 14.3 14.3 19.1 19.1 19.1 19.1 19.1 23.8 23.8 26.2
15.3 15.3 17.8 17.8 17.8 17.8 19.3 19.3 19.3 21.8 21.8 21.8 21.8 21.8 21.8 26.4 26.4 38.8 45.2
12.7 12.7 15.3 15.3 15.3 15.3 16.8 16.8 16.8 22.9 22.9 22.9 24.4 24.4 24.4 31.2 31.2 41.1 50.0
2.4 2.4 4.8 4.8 4.8 4.8 7.1 7.1 7.1 4.8 9.6 10.4 11.9 11.9 15.8 15.8 22.3 27.6 34.0
11 14 14 14 17 22 17 17 22 22 22 22 22 27 27 35 35 46 55
11 11 14 14 14 14 17 17 17 22 22 22 25 29 29 38 38 50 57
H A/F 34.8 41.4 38.4 43 48.8 57.4 48.5 50.1 58.9 54.1 54.1 58.9 62.9 66.5 66.5 78.4 83.3 92.1 111.2
Hx
Hy
17.0 18.0 19.6 19.6 22.4 24.4 23.1 23.9 25.9 25.9 25.9 25.9 27.9 29.7 29.7 36.8 36.8 44.5 50.8
17.8 23.4 18.8 23.4 26.2 33.0 25.4 26.2 33.0 28.2 28.2 33.0 35.0 36.8 36.8 41.6 46.5 47.6 60.4
Female Run Tee N2606 Tube x Female NPT Threads x Tube
Part T Tube P NPT No. OD Female N2606-02-02-02 N2606-04-02-04 N2606-04-04-04 N2606-06-04-06 N2606-06-06-06 N2606-08-06-08 N2606-08-08-08 N2606-12-12-12 N2606-16-12-16 N2606-16-16-16
1/8 1/4 1/4 3/8 3/8 1/2 1/2 3/4 1 1
1/8 1/8 1/4 1/4 3/8 3/8 1/2 3/4 3/4 1
A 43.6 45.9 52.1 53.6 55.7 58.4 67.4 76.5 80.8 91.7
E F G Ax B C D min. A/F A/F 24.6 26.9 29.7 31.2 33.3 36.0 38.9 44.7 49.0 53.6
10.4 10.4 15.0 15.0 15.0 15.0 19.8 20.6 20.6 25.4
15.3 17.8 17.8 19.3 19.3 21.8 21.8 21.8 26.4 26.4
12.7 15.3 15.3 16.8 16.8 22.9 22.9 24.4 31 31
2.4 4.8 4.8 7.1 7.1 10.4 10.4 15.8 22.3 22.3
B r e n n a n I n d u st r ies Atlanta • Cleveland • Dallas • Los Angeles • Seattle
14 14 19 19 22 22 27 35 35 41
11 14 14 17 17 22 22 29 38 38
H
Hx
Hy
37.0 38.6 44.8 46.3 48.3 48.3 57.2 66.4 68.6 79.5
18.0 19.6 22.4 23.9 25.9 25.9 28.7 34.6 36.8 41.4
19.0 19.0 22.4 22.4 22.4 22.4 28.5 31.8 31.8 38.1
27
Cross N2650 Tube x Tube x Tube x Tube
Part T Tube No. OD A Ax N2650-02-02-02-02 N2650-04-04-04-04 N2650-06-06-06-06 N2650-08-08-08-08 N2650-12-12-12-12 N2650-16-16-16-16
1/8 1/4 3/8 1/2 3/4 1
44.8 53.8 61.0 72.0 79.8 98.0
E F G C D min. A/F A/F H Hx
22.4 26.9 30.5 36.0 39.9 49.0
15.3 17.8 19.3 21.8 21.8 26.4
12.7 15.3 16.8 22.9 24.4 31.2
2.4 4.8 7.1 10.4 15.8 22.3
11 14 17 22 27 35
11 14 17 22 28.5 38
31.6 39.2 46.4 51.8 59.4 73.6
15.8 19.6 23.2 25.9 29.7 36.8
NOTE: Reducing Cross with variation in the tube sizes are available. The tube sizes are designated in the order given below. 4
1
2
3 The tube sizes are indicated in the part number in the same order above.
Bulkhead Union N2700-LN Tube x Tube
Part T Tube No. OD A N2700-LN-01-01 N2700-LN-02-02 N2700-LN-04-04 N2700-LN-05-05 N2700-LN-06-06 N2700-LN-08-08 N2700-LN-10-10 N2700-LN-12-12 N2700-LN-16-16 N2700-LN-20-20 N2700-LN-24-24 N2700-LN-32-32
28
1/16 1/8 1/4 5/16 3/8 1/2 5/8 3/4 1 1-1/4 1-1/2 2
31.5 51.3 57.6 60.7 62.2 71.1 72.6 79.0 95.6 123.2 139.2 180.4
E F G Ax C D min. A/F A/F H 17.3 31.2 33.6 35.8 36.8 41.9 42.7 47.5 57.4 69.9 76.4 93.7
11.0 15.3 17.8 18.5 19.3 21.8 21.8 21.8 26.4 38.9 45.2 62.7
8.6 12.7 15.3 16.3 7.1 22.9 24.4 24.4 31.2 41.2 50.0 67.6
1.3 2.4 4.8 6.3 7.1 10.4 12.7 16.0 22.3 27.6 34.0 46.0
11 11 16 17 22 24 27 30 35 50 60 70
8 11 14 16 17 22 25 28.5 38 50 57 76
B r e n n a n I n d u st r ies Atlanta • Cleveland • Dallas • Los Angeles • Seattle
23.8 38.1 43.0 46.0 47.5 50.8 52.3 58.6 71.3 79.0 84.8 105.6
Hx 13.5 24.6 26.2 28.5 29.5 31.8 32.5 37.4 45.2 47.7 49.3 56.4
Panel Max. Hole Panel Drill Size Thickness 5.2 8.3 11.5 13.0 14.6 19.5 22.6 25.8 33.7 41.6 49.6 67.0
3.0 12.7 10.1 11.1 11.1 12.7 12.7 16.8 19.0 19.0 19.0 19.0
Double-Ferrule Tube Fittings Bulkhead Reducing Union N2700-LN Tube X Tube
Part T Tube Tx Tube No. OD OD
E F G Gx A Ax Cx D Dx min. A/F A/F A/F H Hx
N2700-LN-04-02 N2700-LN-06-04 N2700-LN-08-04 N2700-LN-08-06
55.2 60.7 66.8 66.8
1/4 3/8 1/2 1/2
1/8 1/4 1/4 3/8
33.5 36.6 41.9 41.9
15.3 17.8 17.8 17.8
15.3 16.8 22.4 22.4
12.7 15.3 15.3 16.8
2.4 4.8 4.8 7.1
16 22 24 24
14 17 22 22
11 14 14 17
41.2 46.0 49.2 49.2
26.2 29.5 31.8 31.8
Panel Max. Hole Panel Drill Size Thickness 11.5 14.6 19.5 19.5
10.2 11.2 12.7 12.7
Bulkhead Union Elbow N2701-LN Tube X 90˚ Tube
Part T Tube E F G No. OD A Ax Ay C D min. A/F A/F H Hx Hy N2701-LN-02-02 N2701-LN-04-04 N2701-LN-06-06 N2701-LN-08-08 N2701-LN-12-12 N2701-LN-16-16
1/8 1/4 3/8 1/2 3/4 1
43.1 48.9 54.1 63.5 75.3 91.8
31.2 33.6 36.8 41.9 47.5 57.4
22.4 26.9 30.5 36.0 39.9 49.0
15.3 17.8 19.3 21.8 21.8 26.4
12.7 15.3 16.8 22.9 24.4 31.2
2.4 4.8 7.1 10.4 16.0 22.3
11 16 22 24 30 35
11 14 17 22 29 38
36.5 41.5 46.8 53.4 65.2 79.6
24.6 26.2 29.5 31.8 37.4 45.2
15.8 19.6 23.2 25.9 29.7 36.8
Panel Max. Hole Panel Drill Size Thickness 8.3 11.5 14.6 19.5 25.8 33.7
12.7 10.1 11.1 12.7 16.8 19.0
Bulkhead Female Connector N2705-LN Tube x Female NPT Threads Part T Tube P NPT No. OD Female N2705-LN-02-02 N2705-LN-04-02 N2705-LN-04-04 N2705-LN-06-04 N2705-LN-08-06 N2705-LN-08-08 N2705-LN-10-08 N2705-LN-12-12 N2705-LN-16-16 N2705-LN-20-20 N2705-LN-24-24
1/8 1/4 1/4 3/8 1/2 1/2 5/8 3/4 1 1-1/4 1-1/2
1/8 1/8 1/4 1/4 3/8 1/2 1/2 3/4 1 1-1/4 1-1/2
A 44.7 47.0 51.5 54.8 61.7 66.7 67.6 72.4 84.3 105.7 144.5
E F G Ax B D min. A/F A/F H Hx 31.2 33.5 33.5 36.8 41.9 41.9 42.7 47.5 57.4 69.9 76.4
10.4 10.4 15.0 15.0 15.0 19.8 19.8 19.8 20.6 25.4 27.6
12.7 15.3 15.3 16.8 22.9 22.9 22.9 24.4 31.2 41.2 50.0
2.4 4.8 4.8 7.1 10.4 10.4 12.7 16.0 16.0 27.6 34.0
14 16 19 19 22 27 27 35 35 50 60
B r e n n a n I n d u st r ies Atlanta • Cleveland • Dallas • Los Angeles • Seattle
11 14 14 17 22 22 25 28.5 38 50 57
38.1 39.7 44.2 47.5 51.6 56.6 57.4 62.3 72.1 83.5 87.4
24.6 26.2 26.2 29.5 31.0 31.0 32.5 37.4 45.2 47.7 49.3
Panel Max. Hole Panel Drill Size Thickness 8.3 11.5 11.5 14.7 19.5 19.5 22.6 25.8 33.7 41.6 49.6
12.7 10.2 10.2 11.2 12.7 12.7 12.7 16.8 19.0 19.0 19.0
29
Bulkhead Male Connector N2706-LN Tube x Male NPT Threads
Part T Tube P NPT No. OD Male N2706-LN-02-02 N2706-LN-04-02 N2706-LN-04-04 N2706-LN-06-04 N2706-LN-06-06 N2706-LN-06-08 N2706-LN-08-06 N2706-LN-08-08 N2706-LN-12-12 N2706-LN-16-16 N2706-LN-20-20 N2706-LN-24-24
1/8 1/4 1/4 3/8 3/8 3/8 1/2 1/2 3/4 1 1-1/4 1-1/2
1/8 1/8 1/4 1/4 3/8 1/2 3/8 1/2 3/4 1 1-1/4 1-1/2
A
E F G Ax B D min. A/F A/F H Hx
46.4 49.5 54.1 57.4 57.4 63.7 63.3 68.8 76.2 93.2 110.5 122.8
31.2 33.5 33.5 36.8 36.8 36.8 41.9 41.9 47.5 57.4 72.5 79.1
9.6 9.6 14.3 14.3 14.3 19.1 14.3 19.1 19.1 23.9 23.9 26.2
12.7 15.3 15.3 16.8 16.8 16.8 22.9 22.9 24.4 31.2 41.2 50.0
2.4 4.8 4.8 7.1 7.1 7.1 9.6 10.4 15.8 22.3 27.6 34.0
14 16 16 19 19 22 24 24 30 41 50 60
11 14 14 17 17 17 22 22 28.5 38 50 57
39.8 42.2 46.7 50.0 50.0 56.5 53.0 58.8 66.9 81.0 87.5 95.5
Male JIC
Panel Max. Hole Panel Drill Size Thickness
24.6 26.2 26.2 29.5 29.5 29.5 31.8 31.8 37.4 45.2 49.5 51.5
8.3 11.5 11.5 14.7 14.7 14.7 19.5 19.5 25.8 33.7 42.5 50.5
12.7 10.2 10.2 11.2 11.2 11.2 12.7 12.7 16.8 19.0 19.0 19.0
Bulkhead Male Connector N2707-LN Tube x Male JIC Part T Tube No. OD N2707-LN-04-04 N2707-LN-06-06 N2707-LN-08-08 N2707-LN-12-12 N2707-LN-16-16
1/4 3/8 1/2 3/4 1
Tube Flare Size 1/4 3/8 1/2 3/4 1
ØE F G H A Ax D min. A/F A/F D
Hx
53.9 57.2 65.8 79.0 92.5
26.2 29.5 31.8 37.3 45.2
33.5 36.8 41.9 47.5 57.4
15.2 16.8 22.9 24.4 31.2
4.3 7.1 9.9 15.5 21.3
16 19 24 30 41
14 17 22 28.5 38
46.5 49.8 55.6 68.8 80.3
Panel Hole Drill Size
Max. Panel Thickness
11.5 14.7 19.5 25.8 33.7
10.1 11.1 12.7 16.7 19.0
7/16-20 9/16-18 3/4-16 1-1/16-12 1-5/16-12
Bulkhead Reducer N2709-NL Tube x Machined Tube Stub
30
Part T Tube Tx Tube E F G H No. OD OD A Ax D min. A/F A/F D
Hx
N2709-LN-02-02 N2709-LN-04-04 N2709-LN-06-06 N2709-LN-08-08 N2709-LN-10-10 N2709-LN-16-16 N2709-LN-20-20 N 2709-LN-24-24
24.6 26.2 29.5 31.8 32.5 45.2 47.7 49.3
1/8 1/4 3/8 1/2 5/8 1 1-1/4 1-1/2
1/8 1/4 3/8 1/2 5/8 1 1-1/4 1-1/2
49.5 55.9 60.8 72.9 75.2 100.4 120.7 127.2
31.3 33.5 36.8 41.9 42.7 57.4 69.9 76.4
12.7 15.3 16.8 22.9 23.6 31.2 41.2 50.0
2.0 4.8 7.1 9.9 12.7 20.3 27.4 33.0
11 16 19 24 27 35 50 60
11 14 17 22 25 38 50 60
B r e n n a n I n d u st r ies Atlanta • Cleveland • Dallas • Los Angeles • Seattle
43.0 48.5 53.8 62.7 65.0 88.1 89.9 100.1
Panel Max. Hole Panel Drill Size Thickness 8.3 11.5 14.7 19.5 22.6 33.7 41.6 49.6
12.7 10.2 11.2 12.7 12.7 19.1 19.1 19.1
Double-Ferrule Tube Fittings O Seal Male Connector N6400 Tube x Male SAE Straight Threads Part T Tube No. OD N6400-02-02-O 1/8 N 6400-04-04-O 1/4 N6400-04-06-O 1/4 N6400-04-08-O 1/4 N6400-04-10-O 1/4 N6400-05-05-O 5/16 N6400-06-04-O 3/8 N6400-06-06-O 3/8 N6400-06-08-O 3/8 N6400-06-10-O 3/8 N6400-08-06-O 1/2 N6400-08-08-O 1/2 N6400-08-10-O 1/2 N6400-08-12-O 1/2 N6400-10-08-O 5/8 N6400-10-10-O 5/8 N6400-12-08-O 3/4 N6400-12-12-O 3/4 N6400-14-14-O 7/8 N6400-16-12-O 1 N6400-16-16-O 1
S, SAE/MS ØE F G Thread A B C D min. A/F A/F 5/16-24 30.0 7.6 15.2 12.7 2.3 11 11 7/16-20 34.0 9.1 17.8 15.2 4.8 14 14 9/16-18 35.5 9.9 17.8 15.2 4.8 17 14 3/4-16 37.6 11.2 17.8 15.2 4.8 22 14 7/8-14 40.6 12.7 17.8 15.2 4.8 25.4 14 1/2-20 34.8 9.1 18.5 16.2 6.3 16 16 7/16-20 35.5 9.1 19.3 16.8 5.1 16 17 9/16-18 37.1 9.9 19.3 16.8 7.1 17 17 3/4-16 39.1 11.2 19.3 16.8 7.1 22 17 7/8-14 42.2 12.7 19.3 16.8 7.1 25.4 17 9/16-18 39.1 9.9 21.8 22.9 7.1 22 22 3/4-16 41.9 11.2 21.8 22.9 10.4 22 22 7/8-14 45.0 12.7 21.8 22.9 10.4 25.4 22 1.1/16-12 49.0 15.0 21.8 22.9 10.4 32 22 3/4-16 41.9 11.2 21.8 24.4 10.7 24 25.4 7/8-14 45.2 12.7 21.8 24.4 12.7 25.4 25.4 3/4-16 46.0 11.2 21.8 24.4 10.7 27 28.5 1-1/16-12 49.0 15.0 21.8 24.4 15.7 32 28.5 1-3/16-12 49.0 15.0 21.8 25.9 18.3 35 32 1-1/16-12 53.3 15.0 26.4 31.2 16.8 35 38 1-5/16-12 54.4 15.0 26.4 31.2 22.3 38 38
H 23.4 26.7 28.2 30.2 33.3 27.4 28.2 29.7 31.7 34.8 29.0 31.7 34.8 38.8 31.7 35.1 35.8 38.9 38.9 41.1 42.2
O Ring Part No. 2 OPU 4 OPU 6 OPU 8 OPU 10 OPU 5 OPU 4 OPU 6 OPU 8 OPU 10 OPU 6 OPU 8 OPU 10 OPU 12 OPU 8 OPU 10 OPU 8 OPU 12 OPU 14 OPU 12 OPU 16 OPU
90° Positionable Male Elbow N6801 Tube X Male SAE Straight Threads
Part T Tube SAE/MS No. OD Thread N6801-04-04-NWO N6801-04-06-NWO N6801-06-06-NWO N6801-06-08-NWO N6801-08-08-NWO N6801-10-10-NWO N6801-12-12-NWO N6801-14-14-NWO N6801-16-16-NWO N6801-20-20-NWO N6801-24-24-NWO
E Fx G Ax B C D min. F A/F A/F Hx
1/4 7/16-20 28.5 1/4 9/16-18 30.5 3/8 9/16-18 32.0 3/8 3/4-16 34.8 1/2 3/4-16 37.6 5/8 7/8-14 39.6 3/4 1-1/16-12 41.4 7/8 1-1/16-12 43.2 1 1-5/16-12 50.5 1-1/4 1-5/8-12 67.8 1-1/2 1-7/8-12 78.0
9.9 11.2 11.2 12.7 12.7 14.3 16.8 16.8 16.8 16.8 16.8
17.8 17.8 19.3 19.3 21.8 21.8 21.8 21.8 26.4 38.9 45.2
15.3 15.3 16.8 16.8 22.9 24.4 24.4 25.9 31.2 41.2 50.0
4.8 4.8 7.1 7.1 10.4 12.7 15.8 18.3 22.3 27.6 34.0
14 16 16 22 22 24 27 30 35 46 50
14 17 17 22 22 25 32 32 35 50 55
B r e n n a n I n d u st r ies Atlanta • Cleveland • Dallas • Los Angeles • Seattle
14 14 17 17 22 25 28.5 32 38 50 60
21.0 23.1 24.6 27.4 27.4 29.5 31.2 33 38.4 45.7 50.8
Hy U 28.5 32.3 32.3 37.8 37.8 43.4 48.8 50.5 53.6 58.2 60.4
16.5 20.0 20.0 25.6 25.6 29.5 36.6 40.4 44.0 54.9 62.5
O Ring Part No. 4 OPU 6 OPU 6 OPU 8 OPU 8 OPU 10 OPU 12 OPU 14 OPU 16 OPU 20 OPU 24 OPU
31
45˚ Positionable Male Elbow N6802 Tube X Male SAE Straight Threads
Part T Tube SAE/MS No. OD Male N6802-04-04-NWO N6802-06-06-NWO N6802-08-08-NWO N6802-12-12-NWO N6802-16-16-NWO
1/4 3/8 1/2 3/4 1
7/16-20 9/16-18 3/4-16 1-1/16-12 1-5/16-12
E Fx G B C D min. F A/F A/F
A 25.7 27.9 32.0 39.9 47.5
9.9 11.2 12.7 16.8 16.8
17.8 19.3 21.8 21.8 26.4
15.3 16.8 22.9 24.4 31.2
4.8 7.1 10.4 15.8 19.8
14 16 22 27 35
14 17 22 32 38
14 17 22 28.5 38
Hx A/F
Hy U
18.3 20.6 21.8 29.7 35.3
25.6 28.2 32.3 47.3 50.6
16.5 20.0 25.7 36.6 44.0
O Ring Part No. 4 OPU 6 OPU 8 OPU 12 OPU 16 OPU
Positionable Male Branch Tee N6803 Tube x Tube x Male SAE Straight Threads
Part T S SAE/MS Tube OD Male No. N6803-04-04-04-NWO N6803-06-06-06-NWO N6803-08-08-08-NWO N6803-12-12-12-NWO N6803-16-16-16-NWO N6803-20-20-20-NWO N6803-24-24-24-NWO
32
1/4 7/16-20 3/8 9/16-18 1/2 3/4-16 3/4 1-1/16-12 1 1-5/16-12 1-1/4 1-5/8-12 1-1/2 1-7/8-12
E F Fx G Ax B C D min. A/F A/F A/F H Hx Hy U
A 57.0 64.0 75.2 82.8 101.1 135.6 156.0
28.5 32.0 37.6 41.4 50.5 68 78.0
9.9 11.2 12.7 16.8 16.8 16.8 16.8
17.8 19.3 21.8 21.8 26.4 38.9 45.2
15.3 16.8 22.9 24 31.2 41.2 50.0
4.8 7.1 10.4 15.8 22.3 27.6 34.0
14 16 22 27 35 46 50
14 17 22 32 35 50 55
B r e n n a n I n d u st r ies Atlanta • Cleveland • Dallas • Los Angeles • Seattle
14 17 22 28.5 38 50 60
42.0 49.2 54.8 62.4 76.8 91.4 101.6
21.0 24.6 27.4 31.2 38.4 46 51
28.5 32.3 37.8 48.8 53.6 58 60
16.5 20.0 25.6 36.6 44.0 55 63
O Ring Part No. 4 OPU 6 OPU 8 OPU 12 OPU 16 OPU 20 OPU 24 OPU
Double-Ferrule Tube Fittings Positionable Male Run Tee N6804 Tube x Male SAE Straight Threads x Tube
Part T S SAE/MS Tube OD Male No. N6804-04-04-04-NWO N6804-06-06-06-NWO N6804-08-08-08-NWO N6804-12-12-12-NWO N6804-16-16-16-NWO N6804-20-20-20-NWO N6804-24-24-24-NWO
1/4 7/16-20 3/8 9/16-18 1/2 3/4-16 3/4 1-1/16-12 1 1-5/16-12 1-1/4 1-5/8-12 1-1/2 1-7/8-12
A 57.0 64.3 75.4 90.2 104.1 126.0 138.4
E F Fx G Ax B C D min. A/F A/F A/F H Hx Hy U 28.5 32.0 37.6 41.4 50.5 67.8 78.0
9.9 11.2 12.7 16.8 16.8 16.8 16.8
17.9 19.3 21.8 21.8 26.4 38.9 45.2
15.3 16.8 22.9 24.4 31.2 41.2 50.0
4.8 7.1 10.4 15.8 22.3 27.6 34.0
14 16 22 27 35 46 50
14 17 22 32 35 50 55
14 17 22 28.5 38 50 60
49.5 56.9 65.2 80.0 92.0 103.9 111.2
21.0 24.6 27.4 31.2 38.4 45.7 50.8
28.5 32.3 37.8 48.8 53.6 58.2 60.4
16.5 20.0 25.6 36.6 44.0 54.9 62.5
O Ring Part No. 4 OPU 6 OPU 8 OPU 12 OPU 16 OPU 20 OPU 24 OPU
BSPP Male Connector N7002 Tube X Male BSPP Threads BRENNAN PART NO. N7002-02-02 N7002-02-04 N7002-04-02 N7002-04-04 N7002-06-04 N7002-06-06 N7002-06-08 N7002-08-04 N7002-08-06 N7002-08-08 N7002-08-12 N7002-12-08 N7002-12-12 N7002-12-16 N7002-16-08 N7002-16-12 N7002-16-16 N7002-20-20 N7002-24-24
T P E F TUBE O.D. ISO MALE A B C D (min.) A/F Fd 1/8 1/8 30.0 7.1 15.3 12.7 2.4 14 13.7 1/8 1/4 35.3 11.2 15.3 12.7 2.4 19 18.0 1/4 1/8 32.3 7.1 17.8 15.3 4.8 14 13.7 1/4 1/4 37.6 11.2 17.8 15.3 4.8 19 18.0 3/8 1/4 39.2 11.2 19.3 16.8 5.8 19 18.0 3/8 3/8 40.4 11.2 19.3 16.8 7.1 22 21.8 3/8 1/2 46.3 14.2 19.3 16.8 7.1 27 26.0 1/2 1/4 42.7 11.2 21.8 22.9 5.8 22 18.0 1/2 3/8 43.2 11.2 21.8 22.9 7.9 22 21.8 1/2 1/2 49.0 14.2 21.8 22.9 10.4 27 26.0 1/2 3/4 52.8 15.7 21.8 22.9 10.4 35 32.0 3/4 1/2 49.0 14.2 21.8 24.4 11.9 27 26.0 3/4 3/4 52.8 15.7 21.8 24.4 15.8 35 32.0 3/4 1 56.4 18.3 21.8 24.4 15.8 41 39.0 1 1/2 56.9 14.2 26.4 31.2 11.9 35 26.0 1 3/4 57.5 15.7 26.4 31.2 15.8 35 32.0 1 1 60.0 18.3 26.4 31.2 19.8 41 39.0 1-1/4 1-1/4 78.9 19.8 38.9 41.2 25.0 50 49.0 1-1/2 1-1/2 90.8 22.1 45.2 50.0 31.8 60 54.7
G A/F 11 11 14 14 17 17 17 22 22 22 22 28.5 28.5 28.5 38 38 38 50 57
H 23.4 28.7 24.9 30.2 31.8 33.0 38.9 32.5 33.0 38.9 42.7 38.9 42.7 45.6 43.7 45.2 47.8 55.9 63.2
PARALLEL THREADS ARE AS PER ISO-228 PART-1 #GROOVE IS AS PER DIN 3852 FORM-'G'
B r e n n a n I n d u st r ies Atlanta • Cleveland • Dallas • Los Angeles • Seattle
33
Brennan No. Description Swagelok N0304-01 N0304-02 N0304-04 N0304-05 N0304-06 N0304-08 N0304-10 N0304-12 N0304-14 N0304-16 N0304-20 N0304-24 N0304-32 N0318-01 N0318-02 N0318-04 N0318-05 N0318-06 N0318-08 N0318-10 N0318-12 N0318-14 N0318-16 N0318-20 N0318-24 N0318-32 N0319-B-01 N0319-B-02 N0319-B-04 N0319-B-05 N0319-B-06 N0319-B-08 N0319-B-10 N0319-B-12 N0319-B-14 N0319-B-16 N0319-B-20 N0319-B-24 N0319-B-32 N0319-F-01 N0319-F-02 N0319-F-04 N0319-F-05 N0319-F-06 N0319-F-08 N0319-F-10 N0319-F-12 N0319-F-14 N0319-F-16 N0319-F-20 N0319-F-24 N0319-F-32 N0319-S-01 N0319-S-02 N0319-S-04 N0319-S-05 N0319-S-06 N0319-S-08 N0319-S-10 N0319-S-12 N0319-S-14 N0319-S-16 N0319-S-20 N0319-S-24 N0319-S-32 N2402-02-02 N2402-04-04 N2402-06-06 N2402-08-08 N2402-12-12 N2402-16-16 N2403-01-01 N2403-02-01 N2403-02-02
34
IN PLUG IN PLUG IN PLUG IN PLUG IN PLUG IN PLUG IN PLUG IN PLUG IN PLUG IN PLUG IN PLUG IN PLUG IN PLUG IN NUT IN NUT IN NUT IN NUT IN NUT IN NUT IN NUT IN NUT IN NUT IN NUT IN NUT IN NUT IN NUT BACK FERRULE BACK FERRULE BACK FERRULE BACK FERRULE BACK FERRULE BACK FERRULE BACK FERRULE BACK FERRULE BACK FERRULE BACK FERRULE BACK FERRULE BACK FERRULE BACK FERRULE FRONT FERRULE FRONT FERRULE FRONT FERRULE FRONT FERRULE FRONT FERRULE FRONT FERRULE FRONT FERRULE FRONT FERRULE FRONT FERRULE FRONT FERRULE FRONT FERRULE FRONT FERRULE FRONT FERRULE FERRULE SET FERRULE SET FERRULE SET FERRULE SET FERRULE SET FERRULE SET FERRULE SET FERRULE SET FERRULE SET FERRULE SET FERRULE SET FERRULE SET FERRULE SET IN-MJ IN-MJ IN-MJ IN-MJ IN-MJ IN-MJ IN-IN IN-IN IN-IN
100-P 200-P 400-P 500-P 600-P 810-P 1010-P 1210-P 1410-P 1610-P 2000-P 2400-P 3200-P 102-1 202-1 402-1 502-1 602-1 812-1 1012-1 1212-1 1412-1 1612-1 2002-1 2402-1 3202-1 104-1 204-1 404-1 504-1 604-1 814-1 1014-1 1214-1 1414-1 1614-1 2004-1 2404-1 3204-1 103-1 203-1 403-1 503-1 603-1 813-1 1013-1 1213-1 1413-1 1613-1 2003-1 2413-1 3213-1 100 SET 200 SET 400 SET 500 SET 600 SET 810 SET 1010 SET 1210 SET 1410 SET 1610 SET 2000 SET 2400 SET 3200 SET 200-6-2AN 400-6-4AN 600-6-6AN 810-6-8AN 1210-6-12AN 1610-6-16AN 100-6 200-6-1 200-6
Parker CPI 1 FNZ 2 FNZ 4 FNZ 5 FNZ 6 FNZ 8 FNZ 10 FNZ 12 FNZ 14 FNZ 16 FNZ 20 FNZ 24 FNZ 32 FNZ 1 BZ 2 BZ 4 BZ 5 BZ 6 BZ 8 BZ 10 BZ 12 BZ 14 BZ 16 BZ 20 BZ 24 BZ 32 BZ NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA 1 TZ 2 TZ 4 TZ 5 TZ 6 TZ 8 TZ 10 TZ 12 TZ 14 TZ 16 TZ 20 TZ 24 TZ 32 TZ 2-2 XHBZ 4-4 XHBZ 6-6 XHBZ 8-8 XHBZ 12-12 XHBZ 16-16 XHBZ 1-1 HBZ 2-1 HBZ 2-2 HBZ
Parker A-LOK BI-LOK GYROLOK 1BLP1 2BLP2 4BLP4 5BLP5 6BLP6 8BLP8 10BLP10 12BLP12 14BLP14 16BLP16 20BLP20 24BLP24 32BLP32 1NU1 2NU2 4NU4 5NU5 6NU6 8NU8 10NU10 12NU12 14NU14 16NU16 20NU20 24NU24 32NU32 1BF1 2BF2 4BF4 5BF5 6BF6 8BF8 10BF10 12BF12 14BF14 16BF16 20BF20 24BF24 32BF32 1FF1 2FF2 4FF4 5FF5 6FF6 8FF8 10FF10 12FF12 14FF14 16FF16 20FF20 24FF24 32FF32 1ALOK -SET 2ALOK -SET 4ALOK -SET 5ALOK -SET 6ALOK -SET 8ALOK -SET 10ALOK -SET 12ALOK -SET 14ALOK -SET 16ALOK -SET 20ALOK -SET 24ALOK -SET 32ALOK -SET 2XASC2 4XASC4 6XASC6 8XASC8 12XASC12 16XASC16 1SC1 2SC1 2SC2
DBA 1 DBA 2 DBA 4 DBA 5 DBA 6 DBA 8 DBA 10 DBA 12 DBA 14 DBA 16 DBA 20 DBA 24 DBA 32 DNA 1 DNA 2 DNA 4 DNA 5 DNA 6 DNA 8 DNA 10 DNA 12 DNA 14 DNA 16 DNA 20 DNA 24 DNA 32 DOB 1 DOB 2 DOB 4 DOB 5 DOB 6 DOB 8 DOB 10 DOB 12 DOB 14 DOB 16 DOB 20 DOB 24 DOB 32 DOF 1 DOF 2 DOF 4 DOF 5 DOF 6 DOF 8 DOF 10 DOF 12 DOF 14 DOF 16 DOF 20 DOF 24 DOF 32 DOS 1 DOS 2 DOS 4 DOS 5 DOS 6 DOS 8 DOS 10 DOS 12 DOS 14 DOS 16 DOS 20 DOS 24 DOS 32 DUC 2-2 DUC 4-4 DUC 6-6 DUC 8-8 DUC 12-12 DUC 16-16 DUA 1 DUR 2-1 DUA 2
B r e n n a n I n d u st r ies Atlanta • Cleveland • Dallas • Los Angeles • Seattle
1P 2P 4P 5P 6P 8P 10P 12P 14P 16P 20P 24P 32P 1N 2N 4N 5N 6N 8N 10N 12N 14N 16N 20N 24N 32N 1FR 2FR 4FR 5FR 6FR 8FR 10FR 12FR 14FR 16FR 20FR 24FR 32FR 1FF 2FF 4FF 5FF 6FF 8FF 10FF 12FF 14FF 16FF 20FF 24FF 32FF 1SF 2SF 4SF 5SF 6SF 8SF 10SF 12SF 14SF 16SF 20SF 24SF 32SF 2UAN2 4UAN4 6UAN6 8UAN8 12UAN12 16UAN16 1U 2RU1 2U
LET-LOK 7121L-1/16-1/16 7121L-1/8-1/8 7121L-1/4-1/4 7121L-5/16-5/16 7121L-3/8-3/8 7121L-1/2-1/2 7121L-5/8-5/8 7121L-3/4-3/4 7121L-7/8-7/8 7121L-1-1 7121L-1-1/4-1-1/4 7121L-1-1/2-1/1/2 7121L-2-2 761L-1/16 761L-1/8 761L-1/4 761L-5/16 761L-3/8 761L-1/2 761L-5/8 761L-3/4 761L-7/8 761L-1 761L-1-1/4 761L-1-1/2 761L-2 760LB-1/16-1/16 760LB-1/8-1/8 760LB-1/4-1/4 760LB-5/16-5/16 760LB-3/8-3/8 760LB-1/2-1/2 760LB-5/8-5/8 760LB-3/4-3/4 760LB-7/8-7/8 760LB-1-1 760LB-1-1/4-1-1/4 760LB-1-1/2-1/1/2 760LB-2-2 760LF-1/16-1/16 760LF-1/8-1/8 760LF-1/4-1/4 760LF-5/16-5/16 760LF-3/8-3/8 760LF-1/2-1/2 760LF-5/8-5/8 760LF-3/4-3/4 760LF-7/8-7/8 760LF-1-1 760LF-1-1/4-1-1/4 760LF-1-1/2-1/1/2 760LF-2-2 NA NA NA NA NA NA NA NA NA NA NA NA NA 762LFL-1/8-1/8 762LFL-1/4-1/4 762LFL-3/8-38 762LFL-1/2-1/2 762LFL-3/4-3/4 762LFL-1-1 762L-1/16-1/16 762L-1/8-1/16 762L-1/8-1/8
Hy-Lok CPA-1 CPA-2 CPA-4 CPA-5 CPA-6 CPA-8 CPA-10 CPA-12 CPA-14 CPA-16 CPA-20 CPA-24 CPA-32 CN-1 CN-2 CN-4 CN-5 CN-6 CN-8 CN-10 CN-12 CN-14 CN-16 CN-20 CN-24 CN-32 CFB-1 CFB-2 CFB-4 CFB-5 CFB-6 CFB-8 CFB-10 CFB-12 CFB-14 CFB-16 CFB-20 CFB-24 CFB-32 CFF-1 CFF-2 CFF-4 CFF-5 CFF-6 CFF-8 CFF-10 CFF-12 CFF-14 CFF-16 CFF-20 CFF-24 CFF-32 CFS-1 CFS-2 CFS-4 CFS-5 CFS-6 CFS-8 CFS-10 CFS-12 CFS-14 CFS-16 CFS-20 CFS-24 CFS-32 CFU-2 CFU-4 CFU-6 CFU-8 CFU-12 CFU-16 CUA-1 CUA 2-1 CUA-2
Cross Reference Chart Brennan No. Description Swagelok N2403-04-02 N2403-04-04 N2403-05-02 N2403-05-04 N2403-05-05 N2403-06-02 N2403-06-04 N2403-06-06 N2403-08-02 N2403-08-04 N2403-08-06 N2403-08-08 N2403-10-06 N2403-10-08 N2403-10-10 N2403-12-04 N2403-12-06 N2403-12-08 N2403-12-12 N2403-14-14 N2403-16-08 N2403-16-12 N2403-16-16 N2403-20-16 N2403-20-20 N2403-24-20 N2403-24-24 N2403-32-32 N2404-01-01 N2404-01-02 N2404-02-01 N2404-02-02 N2404-02-04 N2404-04-02 N2404-04-04 N2404-04-06 N2404-04-08 N2404-05-04 N2404-06-02 N2404-06-04 N2404-06-06 N2404-06-08 N2404-08-04 N2404-08-06 N2404-08-08 N2404-08-12 N2404-08-16 N2404-10-06 N2404-10-08 N2404-12-06 N2404-12-08 N2404-12-12 N2404-12-16 N2404-14-12 N2404-16-08 N2404-16-12 N2404-16-16 N2404-20-16 N2404-20-20 N2404-24-24 N2404-32-32 N2404-01-01-BT N2404-01-02-BT N2404-02-02-BT N2404-02-04-BT N2404-03-02-BT N2404-03-04-BT N2404-04-02-BT N2404-04-04-BT N2404-04-06-BT N2404-04-08-BT N2404-05-04-BT N2404-05-08-BT N2404-06-04-BT N2404-06-06-BT
IN-IN IN-IN IN-IN IN-IN IN-IN IN-IN IN-IN IN-IN IN-IN IN-IN IN-IN IN-IN IN-IN IN-IN IN-IN IN-IN IN-IN IN-IN IN-IN IN-IN IN-IN IN-IN IN-IN IN-IN IN-IN IN-IN IN-IN IN-IN IN-MNPT IN-MNPT IN-MNPT IN-MNPT IN-MNPT IN-MNPT IN-MNPT IN-MNPT IN-MNPT IN-MNPT IN-MNPT IN-MNPT IN-MNPT IN-MNPT IN-MNPT IN-MNPT IN-MNPT IN-MNPT IN-MNPT IN-MNPT IN-MNPT IN-MNPT IN-MNPT IN-MNPT IN-MNPT IN-MNPT IN-MNPT IN-MNPT IN-MNPT IN-MNPT IN-MNPT IN-MNPT IN-MNPT IN-MNPT Bore Through IN-MNPT Bore Through IN-MNPT Bore Through IN-MNPT Bore Through IN-MNPT Bore Through IN-MNPT Bore Through IN-MNPT Bore Through IN-MNPT Bore Through IN-MNPT Bore Through IN-MNPT Bore Through IN-MNPT Bore Through IN-MNPT Bore Through IN-MNPT Bore Through IN-MNPT Bore Through
400-6-2 400-6 500-6-2 500-6-4 500-6 600-6-2 600-6-4 600-6 810-6-2 810-6-4 810-6-6 810-6 1010-6-6 1010-6-8 1010-6 1210-6-4 1210-6-6 1210-6-8 1210-6 1410-6 1610-6-8 1610-6-12 1610-6 2000-6-20 2000-6 2400-6-20 2400-6 3200-6 100-1-1 100-1-2 200-1-1 200-1-2 200-1-4 400-1-2 400-1-4 400-1-6 400-1-8 500-1-4 600-1-2 600-1-4 600-1-6 600-1-8 810-1-4 810-1-6 810-1-8 810-1-12 810-1-16 1010-1-6 1010-1-8 1210-1-6 1210-1-8 1210-1-12 1210-1-16 1410-1-12 1610-1-8 1610-1-12 1610-1-16 2000-1-16 2000-1-20 2400-1-24 3200-1-32 100-1-1BT 100-1-2BT 200-1-2BT 200-1-4BT 300-1-2BT 300-1-4BT 400-1-2BT 400-1-4BT 400-1-6BT 400-1-8BT 500-1-4BT 500-1-8BT 600-1-4BT 600-1-6BT
Parker CPI 4-2 HBZ 4-4 HBZ 5-2 HBZ 5-4 HBZ 5-5 HBZ 6-2 HBZ 6-4 HBZ 6-6 HBZ 8-2 HBZ 8-4 HBZ 8-6 HBZ 8-8 HBZ 10-6 HBZ 10-8 HBZ 10-10 HBZ 12-4 HBZ 12-6 HBZ 12-8 HBZ 12-12 HBZ 14-14 HBZ 16-8 HBZ 16-12 HBZ 16-16 HBZ 20-16 HBZ 20-20 HBZ 24-20 HBZ 24-24 HBZ 32-32 HBZ 1-1 FBZ 1-2 FBZ 2-1 FBZ 2-2 FBZ 2-4 FBZ 4-2 FBZ 4-4 FBZ 4-6 FBZ 4-8 FBZ 5-4 FBZ 6-2 FBZ 6-4 FBZ 6-6 FBZ 6-8 FBZ 8-4 FBZ 8-6 FBZ 8-8 FBZ 8-12 FBZ 8-16 FBZ 10-6 FBZ 10-8 FBZ 12-6 FBZ 12-8 FBZ 12-12 FBZ 12-16 FBZ 14-12 FBZ 16-8 FBZ 16-12 FBZ 16-16 FBZ 20-16 FBZ 20-20 FBZ 24-24 FBZ 32-32 FBZ 1-1 FH4BZ 1-2 FH4BZ 2-2 FH4BZ 2-4 FH4BZ 3-2 FH4BZ 3-4 FH4BZ 4-2 FH4BZ 4-4 FH4BZ 4-6 FH4BZ 4-8 FH4BZ 5-4 FH4BZ 5-8 FH4BZ 6-4 FH4BZ 6-6 FH4BZ
Parker A-LOK BI-LOK GYROLOK 4RU2 4SC4 5RU2 5RU4 5SC5 6RU2 6RU4 6SC6 8RU2 8RU4 8RU6 8SC8 10RU6 10RU8 10SC10 12RU4 12RU6 12RU8 12SC12 14SC14 16RU8 16RU12 16SC16 20RU16 20SC20 24RU20 24SC24 32SC32 1MSC1N 1MSC2N 2MSC1N 2MSC2N 2MSC4N 4MSC2N 4MSC4N 4MSC6N 4MSC8N 5MSC4N 6MSC2N 6MSC4N 6MSC6N 6MSC8N 8MSC4N 8MSC6N 8MSC8N 8MSC12N 8MSC16N 10MSC6N 10MSC8N 12MSC6N 12MSC8N 12MSC12N 12MSC16N 14MSC12N 16MSC8N 16MSC12N 16MSC16N 20MSC16N 20MSC20N 24MSC24N 32MSC32N 1MTC1N 1MTC2N 2MTC2N 2MTC4N 3MTC2N 3MTC4N 4MTC2N 4MTC4N 4MTC6N 4MTC8N 5MTC4N 5MTC8N 6MTC4N 6MTC6N
DUR 4-2 DUA 4 DUR 5-2 DUA 5-4 DUA 5 DUR 6-2 DUR 6-4 DUA 6 DUR 8-2 DUR 8-4 DUR 8-6 DUA 8 DUR 10-6 DUR 10-8 DUA 10 DUR 12-4 DUR 12-6 DUR 12-8 DUA 12 DUA 14 DUR 16-8 DUR 16-12 DUA 16 DUR 20-16 DUA 20 DUR 24-20 DUA 24 DUA 32 DCT 1-1 DCT 1-2 DCT 2-1 DCT 2-2 DCT 2-4 DCT 4-2 DCT 4-4 DCT 4-6 DCT 4-8 DCT 5-4 DCT 6-2 DCT 6-4 DCT 6-6 DCT 6-8 DCT 8-4 DCT 8-6 DCT 8-8 DCT 8-12 DCT 8-16 DCT 10-6 DCT 10-8 DCT 12-6 DCT 12-8 DCT 12-12 DCT 12-16 DCT 14-12 DCT 16-8 DCT 16-12 DCT 16-16 DCT 20-16 DCT 20-20 DCT 24-24 DCT 32-32 DCZ 1-1 DCZ 1-2 DCZ 2-2 DCZ 2-4 DCZ 3-2 DCZ 3-4 DCZ 4-2 DCZ 4-4 DCZ 4-6 DCZ 4-8 DCZ 5-4 DCZ 5-8 DCZ 6-4 DCZ 6-6
B r e n n a n I n d u st r ies Atlanta • Cleveland • Dallas • Los Angeles • Seattle
4RU2 4U 5RU2 5U4 5U 6RU2 6RU4 6U 8RU2 8RU4 8RU6 8U 10RU6 10RU8 10U 12RU4 12RU6 12RU8 12U 14U 16RU8 16RU12 16U 20RU16 20U 24RU20 24U 32U 1CM1 1CM2 2CM1 2CM2 2CM4 4CM2 4CM4 4CM6 4CM8 5CM4 6CM2 6CM4 6CM6 6CM8 8CM4 8CM6 8CM8 8CM12 8CM16 10CM6 10CM8 12CM6 12CM8 12CM12 12CM16 14CM12 16CM8 16CM12 16CM16 20CM16 20CM20 24CM24 32CM32 1CMT1 1CMT2 2CMT2 2CMT4 3CMT2 3CMT4 4CMT2 4CMT4 4CMT6 4CMT8 5CMT4 5CMT8 6CMT4 6CMT6
LET-LOK 763L-1/4-1/8 762L-1/4-1/4 763L-5/16-1/8 763L-5/16-1/4 762L-5/16-5/16 763L-3/8-1/8 763L-3/8-1/4 762L-3/8-3/8 763L-1/2-1/8 763L-1/2-1/4 763L-1/2-3/8 762L-1/2-1/2 763L-5/8-3/8 763L-5/8-1/2 762L-5/8-5/8 763L-3/4-1/4 763L-3/4-3/8 763L-3/4-1/2 762L-3/4-3/4 762L-7/8-7/8 763L-1-1/2 763L-1-3/4 762L-1-1 763L-1-1/4-1 762L-1-1/4-1-1/4 763L-1-1/2-1-1/4 762L-1-1/2-1-1/2 762L-2-2 768L-1/16-1/16 768L-1/16-1/8 768L-1/8-1/16 768L-1/8-1/8 768L-1/8-1/4 768L-1/4-1/8 768L-1/4-1/4 768L-1/4-3/8 768L-1/4-1/2 768L-5/16-1/4 768L-3/8-1/8 768L-3/8-1/4 768L-3/8-3/8 768L-3/8-1/2 768L-1/2-1/4 768L-1/2-3/8 768L-1/2-1/2 768L-1/2-3/4 768L-1/2-1 768L-5/8-3/8 768L-5/8-1/2 768L-3/4-3/8 768L-3/4-1/2 768L-3/4-3/4 768L-3/4-1 768L-7/8-3/4 768L-1-1/2 768L-1-3/4 768L-1-1 768L-1-1/4-1 768L-1-1/4-1-1/4 768L-1-1/2-1-1/2 768L-2-2 768L 1/16X1/16 TC 768L 1/16X1/8 TC 768L -1/8X1/8 TC 768L -1/8X1/4 TC 768L -3/16X1/8 TC 768L -3/16X1/4TC 768L -1/4X1/8 TC 768L -1/4X1/4 TC 768L -1/4X3/8 TC 768L -1/4X1/2 TC 768L -5/16X1/4 TC 768L -5/16X1/2 TC 768L -3/8X1/4 TC 768L -3/8X3/8 TC
Hy-Lok CUR-4-2 CUA-4 CUR-5-2 CUR-5-4 CUA-5 CUR-6-2 CUR-6-4 CUA-6 CUR-8-2 CUR-8-4 CUR-8-6 CUA-8 CUR-10-6 CUR-10-8 CUA-10 CUR-12-4 CUR-12-6 CUR-12-8 CUA-12 CUA-14 CUR-16-8 CUR-16-12 CUA-16 NA CUA-20 NA CUA-24 CUA-32 CMC-1-1N CMC-1-2N CMC-2-1N CMC-2-2N CMC-2-4N CMC-4-2N CMC-4-4N CMC-4-6N CMC-4-8N CMC-5-4N CMC-6-2N CMC-6-4N CMC-6-6N CMC-6-8N CMC-8-4N CMC-8-6N CMC-8-8N CMC-8-12N CMC-8-16N CMC-10-6N CMC-10-8N CMC-12-6N CMC-12-8N CMC-12-12N CMC-12-16N CMC-14-12N CMC-16-8N CMC-16-12N CMC-16-16N CMC-20-16N CMC-20-20N CMC-24-24N CMC-32-32N CMCT-1-1N CMCT-1-2N CMCT-2-2N CMCT-2-4N CMCT-3-2N CMCT-3-4N CMCT-4-2N CMCT-4-4N CMCT-4-6N CMCT-4-8N CMCT-5-4N CMCT-5-8N CMCT-6-4N CMCT-6-6N
35
Brennan No. Description Swagelok N2404-06-08-BT N2404-08-06-BT N2404-08-08-BT N2404-08-12-BT N2404-10-08-BT N2404-10-12-BT N2404-12-06-BT N2404-12-08-BT N2404-12-12-BT N2404-12-16-BT N2404-14-12-BT N2404-14-16-BT N2404-16-12-BT N2404-16-16-BT N2405-01-01 N2405-01-02 N2405-02-02 N2405-02-04 N2405-04-02 N2405-04-04 N2405-04-06 N2405-04-08 N2405-05-02 N2405-05-04 N2405-06-02 N2405-06-04 N2405-06-06 N2405-06-08 N2405-08-04 N2405-08-06 N2405-08-08 N2405-08-12 N2405-10-06 N2405-10-08 N2405-12-08 N2405-12-12 N2405-14-12 N2405-16-12 N2405-16-16 N2405-20-20 N2405-24-24 N2406-02-02 N2406-02-04 N2406-04-02 N2406-04-04 N2406-04-06 N2406-04-08 N2406-05-06 N2406-05-08 N2406-06-04 N2406-06-06 N2406-06-08 N2406-08-04 N2406-08-06 N2406-08-08 N2406-08-12 N2406-08-16 N2406-10-12 N2406-10-14 N2406-12-08 N2406-12-16 N2406-16-08 N2406-16-20 N2406-16-24 N2408-01 N2408-02 N2408-04 N2408-05 N2408-06 N2408-08 N2408-10 N2408-12 N2408-14 N2408-16 N2408-20
36
IN-MNPT Bore Through IN-MNPT Bore Through IN-MNPT Bore Through IN-MNPT Bore Through IN-MNPT Bore Through IN-MNPT Bore Through IN-MNPT Bore Through IN-MNPT Bore Through IN-MNPT Bore Through IN-MNPT Bore Through IN-MNPT Bore Through IN-MNPT Bore Through IN-MNPT Bore Through IN-MNPT Bore Through IN-FNPT IN-FNPT IN-FNPT IN-FNPT IN-FNPT IN-FNPT IN-FNPT IN-FNPT IN-FNPT IN-FNPT IN-FNPT IN-FNPT IN-FNPT IN-FNPT IN-FNPT IN-FNPT IN-FNPT IN-FNPT IN-FNPT IN-FNPT IN-FNPT IN-FNPT IN-FNPT IN-FNPT IN-FNPT IN-FNPT IN-FNPT TUBE RED TUBE RED TUBE RED TUBE RED TUBE RED TUBE RED TUBE RED TUBE RED TUBE RED TUBE RED TUBE RED TUBE RED TUBE RED TUBE RED TUBE RED TUBE RED TUBE RED TUBE RED TUBE RED TUBE RED TUBE RED TUBE RED TUBE RED IN CAP IN CAP IN CAP IN CAP IN CAP IN CAP IN CAP IN CAP IN CAP IN CAP IN CAP
600-1-8BT 810-1-6BT 810-1-8BT 810-1-12BT 1010-1-8BT 1010-1-12BT 1210-1-6BT 1210-1-8BT 1210-1-12BT 1210-1-16BT 1410-1-12BT 1410-1-16BT 1610-1-12BT 1610-1-16BT 100-7-1 100-7-2 200-7-2 200-7-4 400-7-2 400-7-4 400-7-6 400-7-8 500-7-2 500-7-4 600-7-2 600-7-4 600-7-6 600-7-8 810-7-4 810-7-6 810-7-8 810-7-12 1010-7-6 1010-7-8 1210-7-8 1210-7-12 1410-7-12 1610-7-12 1610-7-16 2000-7-20 2400-7-24 200-R-2 200-R-4 400-R-2 400-R-4 400-R-6 400-R-8 500-R-6 500-R-8 600-R-4 600-R-6 600-R-8 810-R-4 810-R-6 810-R-8 810-R-12 810-R-16 1010-R-12 1010-R-14 1210-R-8 1210-R-16 1610-R-8 1610-R-20 1610-R-24 100-C 200-C 400-C 500-C 600-C 810-C 1010-C 1210-C 1410-C 1610-C 2000-C
Parker CPI 6-8 FH4BZ 8-6 FH4BZ 8-8 FH4BZ 8-12 FH4BZ 10-8 FH4BZ 10-12 FH4BZ 12-6 FH4BZ 12-8 FH4BZ 12-12 FH4BZ 12-16 FH4BZ 14-12 FH4BZ 14-16 FH4BZ 16-12 FH4BZ 16-16 FH4BZ 1-1 GBZ 1-2 GBZ 2-2 GBZ 2-4 GBZ 4-2 GBZ 4-4 GBZ 4-6 GBZ 4-8 GBZ 5-2 GBZ 5-4 GBZ 6-2 GBZ 6-4 GBZ 6-6 GBZ 6-8 GBZ 8-4 GBZ 8-6 GBZ 8-8 GBZ 8-12 GBZ 10-6 GBZ 10-8 GBZ 12-8 GBZ 12-12 GBZ 14-12 GBZ 16-12 GBZ 16-16 GBZ 20-20 GBZ 24-24 GBZ 2-2 TRBZ 4-2 TRBZ 2-4TRBZ 4-4 TRBZ 6-4 TRBZ 8-4 TRBZ 6-5 TRBZ 8-5 TRBZ 4-6 TRBZ 6-6 TRBZ 8-6 TRBZ 4-8 TRBZ 6-8 TRBZ 8-8 TRBZ 12-8 TRBZ 16-8 TRBZ 12-10 TRBZ 14-10 TRBZ 8-12 TRBZ 16-12 TRBZ 8-16 TRBZ 20-16 TRBZ 24-16 TRBZ 1 PNBZ 2 PNBZ 4 PNBZ 5 PNBZ 6 PNBZ 8 PNBZ 10 PNBZ 12 PNBZ 14 PNBZ 16 PNBZ 20 PNBZ
Parker A-LOK BI-LOK GYROLOK 6MTC8N 8MTC6N 8MTC8N 8MTC12N 10MTC8N 10MTC12N 12MTC6N 12MTC8N 12MTC12N 12MTC16N 14MTC12N 14MTC16N 16MTC12N 16MTC16N 1FSC1N 1FSC2N 2FSC2N 2FSC4N 4FSC2N 4FSC4N 4FSC6N 4FSC8N 5FSC2N 5FSC4N 6FSC2N 6FSC4N 6FSC6N 6FSC8N 8FSC4N 8FSC6N 8FSC8N 8FSC12N 10FSC6N 10FSC8N 12FSC8N 12FSC12N 14FSC12N 16FSC12N 16FSC16N 20FSC20N 24FSC24N 2TUR2 4TUR2 2TUR4 4TUR4 6TUR4 8TUR4 6TUR5 8TUR5 4TUR6 6TUR6 8TUR6 4TUR8 6TUR8 8TUR8 12TUR8 16TUR8 12TUR10 14TUR10 8TUR12 16TUR12 8TUR16 20TUR16-SS 24TUR16-SS 1BLEN1 2BLEN2 4BLEN4 5BLEN5 6BLEN6 8BLEN8 10BLEN10 12BLEN12 14BLEN14 16BLEN16 20BLEN20
DCZ 6-8 DCZ 8-6 DCZ 8-8 DCZ 8-12 DCZ 10-8 DCZ 10-12 DCZ 12-6 DCZ 12-8 DCZ 12-12 DCZ 12-16 DCZ 14-12 DCZ 14-16 DCZ 16-12 DCZ 16-16 DSA 1-1 DSA 1-2 DSA 2-2 DSA 2-4 DSA 4-2 DSA 4-4 DSA 4-6 DSA 4-8 DSA 5-2 DSA 5-4 DSA 6-2 DSA 6-4 DSA 6-6 DSA 6-8 DSA 8-4 DSA 8-6 DSA 8-8 DSA 8-12 DSA 10-6 DSA 10-8 DSA 12-8 DSA 12-12 DSA 14-12 DSA 16-12 DSA 16-16 DSA 20-20 DSA 24-24 DRE 2-2 DRE 2-4 DRE 4-2 DRE 4-4 DRE 4-6 DRE 4-8 DRE 5-6 DRE 5-8 DRE 6-4 DRE 6-6 DRE 6-8 DRE 8-4 DRE 8-6 DRE 8-8 DRE 8-12 DRE 8-16 DRE 10-12 DRE 10-14 DRE 12-8 DRE 12-16 DRE 16-8 DRE 16-20 DRE 16-24 DCA 1 DCA 2 DCA 4 DCA 5 DCA 6 DCA 8 DCA 10 DCA 12 DCA 14 DCA 16 DCA 20
B r e n n a n I n d u st r ies Atlanta • Cleveland • Dallas • Los Angeles • Seattle
6CMT8 8CMT6 8CMT8 8CMT12 10CMT8 10CMT12 12CMT6 12CMT8 12CMT12 12CMT16 14CMT12 14CMT16 16CMT12 16CMT16 1CF1 1CF2 2CF2 2CF4 4CF2 4CF4 4CF6 4CF8 5CF2 5CF4 6CF2 6CF4 6CF6 6CF8 8CF4 8CF6 8CF8 8CF12 10CF6 10CF8 12CF8 12CF12 14CF12 16CF12 16CF16 20CF20 24CF24 2R2 2R4 4R2 4R4 4R6 4R8 5R6 5R8 6R4 6R6 6R8 8R4 8R6 8R8 8R12 8R16 10R12 10R14 12R8 12R16 16R8 16R20 16R24 1CP 2CP 4CP 5CP 6CP 8CP 10CP 12CP 14CP 16CP 20CP
LET-LOK 768L -3/8X1/2 TC 768L -1/2X3/8 TC 768L -1/2X1/2 TC 768L -1/2X3/4 TC 768L -5/8X1/2 TC 768L -5/8X3/4 TC 768L -3/4X3/8 TC 768L -3/4X1/2 TC 768L -3/4X3/4 TC 768L -3/4X1 TC 768L -7/8X3/4 TC 768L -7/8X1 TC 768L -1X3/4 TC 768L -1X1 TC 766L-1/16-1/16 766L-1/16-1/8 766L-1/8-1/8 766L-1/8-1/4 766L-1/4-1/8 766L-1/4-1/4 766L-1/4-3/8 766L-1/4-1/2 766L-5/16-1/8 766L-5/16-1/4 766L-3/8-1/8 766L-3/8-1/4 766L-3/8-3/8 766L-3/8-1/2 766L-1/2-1/4 766L-1/2-3/8 766L-1/2-1/2 766L-1/2-3/4 766L-5/8-3/8 766L-5/8-1/2 766L-3/4-1/2 766L-3/4-3/4 766L-7/8-3/4 766L-1-3/4 766L-1-1 766L-1-1/4-1-1/4 766L-1-1/2-1/1/2 767LT-1/8-1/8 767LT-1/8-1/4 767LT-1/4-1/8 767LT-1/4-1/4 767LT-1/4-3/8 767LT-1/4-1/2 767LT-5/16-3/8 767LT-5/16-1/2 767LT-3/8-1/4 767LT-3/8-3/8 767LT-3/8-1/2 767LT-1/2-1/4 767LT-1/2-3/8 767LT-1/2-1/2 767LT-1/2-3/4 767LT-1/2-1 767LT-5/8-3/4 767LT-5/8-7/8 767LT-3/4-1/2 767LT-3/4-1 767LT-1-3/8 767LT-1-1-1/4 767LT-1-1/1/2 7108L-1/16-1/16 7108L-1/8-1/8 7108L-1/4-1/4 7108L-5/16-5/16 7108L-3/8-3/8 7108L-1/2-1/2 7108L-5/8-5/8 7108L-3/4-3/4 7108L-7/8-7/8 7108L-1-1 7108L-1-1/4-1-1/4
Hy-Lok CMCT-6-8N CMCT-8-6N CMCT-8-8N CMCT-8-12N CMCT-10-8N CMCT-10-12N CMCT-12-6N CMCT-12-8N CMCT-12-12N CMCT-12-16N CMCT-14-12N CMCT-14-16N CMCT-16-12N CMCT-16-16N CFC-1-1N CFC-1-2N CFC-2-2N CFC-2-4N CFC-4-2N CFC-4-4N CFC-4-6N CFC-4-8N CFC-5-2N CFC-5-4N CFC-6-2N CFC-6-4N CFC-6-6N CFC-6-8N CFC-8-4N CFC-8-6N CFC-8-8N CFC-8-12N CFC-10-6N CFC-10-8N CFC-12-8N CFC-12-12N CFC-14-12N CFC-16-12N CFC-16-16N CFC-20-20N CFC-24-24N CR-2-2 CR-2-4 CR-4-2 CR-4-4 CR-4-6 CR-4-8 CR-5-6 CR-5-8 CR-6-4 CR-6-6 CR-6-8 CR-8-4 CR-8-6 CR-8-8 CR-8-12 CR-8-16 CR-10-12 CR-10-14 CR-12-8 CR-12-16 CR-16-8 CR-16-20 CR-16-24 CCA-1 CCA-2 CCA-4 CCA-5 CCA-6 CCA-8 CCA-10 CCA-12 CCA-14 CCA-16 CCA-20
Cross Reference Chart Brennan No. Description Swagelok N2408-24 N2408-32 N2425-02-02 N2425-04-02 N2425-04-04 N2425-05-02 N2425-05-04 N2425-06-04 N2425-06-06 N2425-06-08 N2425-08-06 N2425-08-08 N2425-08-12 N2425-10-08 N2425-12-12 N2425-16-16 N2425-20-20 N2425-24-24 N2426-02-02 N2426-04-04 N2426-06-06 N2426-08-08 N2426-12-12 N2426-16-16 N2426-20-20 N2426-24-24 N2427-04-04 N2427-06-06 N2427-08-08 N2427-12-12 N2427-16-16 N2428-02-02 N2428-02-04 N2428-03-02 N2428-03-04 N2428-04-02 N2428-04-04 N2428-04-06 N2428-04-08 N2428-05-04 N2428-06-04 N2428-06-06 N2428-06-08 N2428-08-04 N2428-08-06 N2428-08-08 N2428-10-08 N2428-12-08 N2428-12-12 N2428-16-12 N2428-16-16 N2428-20-20 N2428-24-24 N2429-02-02 N2429-04-04 N2429-06-04 N2429-06-06 N2429-08-08 N2429-12-12 N2429-16-16 N2429-20-20 N2429-24-24 N2430-02-02 N2430-02-04 N2430-04-02 N2430-04-04 N2430-04-06 N2430-04-08 N2430-05-04 N2430-06-04 N2430-06-06 N2430-06-08 N2430-08-04 N2430-08-06 N2430-08-08
IN CAP IN CAP IN-BW IN-BW IN-BW IN-BW IN-BW IN-BW IN-BW IN-BW IN-BW IN-BW IN-BW IN-BW IN-BW IN-BW IN-BW IN-BW IN-SW IN-SW IN-SW IN-SW IN-SW IN-SW IN-SW IN-SW AN-STDPIPE AN-STDPIPE AN-STDPIPE AN-STDPIPE AN-STDPIPE MNPT-STDPIPE MNPT-STDPIPE MNPT-STDPIPE MNPT-STDPIPE MNPT-STDPIPE MNPT-STDPIPE MNPT-STDPIPE MNPT-STDPIPE MNPT-STDPIPE MNPT-STDPIPE MNPT-STDPIPE MNPT-STDPIPE MNPT-STDPIPE MNPT-STDPIPE MNPT-STDPIPE MNPT-STDPIPE MNPT-STDPIPE MNPT-STDPIPE MNPT-STDPIPE MNPT-STDPIPE MNPT-STDPIPE MNPT-STDPIPE MORB-STDPIPE MORB-STDPIPE MORB-STDPIPE MORB-STDPIPE MORB-STDPIPE MORB-STDPIPE MORB-STDPIPE MORB-STDPIPE MORB-STDPIPE FNPT-STDPIPE FNPT-STDPIPE FNPT-STDPIPE FNPT-STDPIPE FNPT-STDPIPE FNPT-STDPIPE FNPT-STDPIPE FNPT-STDPIPE FNPT-STDPIPE FNPT-STDPIPE FNPT-STDPIPE FNPT-STDPIPE FNPT-STDPIPE
2400-C 3200-C 200-1-2W 400-1-2W 400-1-4W 500-1-2W 500-1-4W 600-1-4W 600-1-6W 600-1-8W 810-1-6W 810-1-8W 810-1-12W 1010-1-8W 1210-1-12W 1610-1-16W 2000-1-20W 2400-1-24W 200-6-2W 400-6-4W 600-6-6W 810-6-8W 1210-6-12W 1610-6-16W 2000-6-20W 2400-6-20W 4-TA-1-4AN 6-TA-1-6AN 8-TA-1-8AN 12-TA-1-12AN 16-TA-1-16AN 2-TA-1-2 2-TA-1-4 3-TA-1-2 3-TA-1-4 4-TA-1-2 4-TA-1-4 4-TA-1-6 4-TA-1-8 5-TA-1-4 6-TA-1-4 6-TA-1-6 6-TA-1-8 8-TA-1-4 8-TA-1-6 8-TA-1-8 10-TA-1-8 12-TA-1-8 12-TA-1-12 16-TA-1-12 16-TA-1-16 20-TA-1-20 24-TA-1-24 2-TA-1-2ST 4-TA-1-4ST 6-TA-1-4ST 6-TA-1-6ST 8-TA-1-8ST 12-TA-1-12ST 16-TA-1-16ST 20-TA-1-20ST 24-TA-1-24ST 2-TA7-2 2-TA7-4 4-TA7-2 4-TA7-4 4-TA7-6 4-TA7-8 5-TA7-4 6-TA7-4 6-TA7-6 6-TA7-8 8-TA7-4 8-TA7-6 8-TA7-8
Parker CPI 24 PNBZ 32 PNBZ 2-1/8 ZHBW2 4-1/8 ZHBW2 4-1/4 ZHBW2 5-1/8 ZHBW2 5-1/4 ZHBW2 6-1/4 ZHBW2 6-3/8 ZHBW2 6-1/2 ZHBW2 8-3/8 ZHBW2 8-1/2 ZHBW2 8-3/4 ZHBW2 10-1/2 ZHBW2 12-3/4 ZHBW2 16-1 ZHBW2 20-1-1/4 ZHBW2 24-1-1/2 ZHBW2 2-2 ZHBW 4-4 ZHBW 6-6 ZHBW 8-8 ZHBW 12-12 ZHBW 16-16 ZHBW 20-20 ZHBW 24-24 ZHBW NA NA NA NA NA 2-2 T2HF 2-4 T2HF 3-2 T2HF 3-4 T2HF 4-2 T2HF 4-4 T2HF 4-6 T2HF 4-8 T2HF 5-4 T2HF 6-4 T2HF 6-6 T2HF 6-8 T2HF 8-4 T2HF 8-6 T2HF 8-8 T2HF 10-8 T2HF 12-8 T2HF 12-12 T2HF 16-12 T2HF 16-16 T2HF 20-20 T2HF 24-24 T2HF 2-2 T2HOA 4-4 T2HOA 6-4 T2HOA 6-6 T2HOA 8-8 T2HOA 12-12 T2HOA 16-16 T2HOA 20-20 T2HOA 24-24 T2HOA 2-2 T2HG 2-4 T2HG 4-2 T2HG 4-4 T2HG 4-6 T2HG 4-8 T2HG 5-4 T2HG 6-4 T2HG 6-6 T2HG 6-8 T2HG 8-4 T2HG 8-6 T2HG 8-8 T2HG
Parker A-LOK BI-LOK GYROLOK 24BLEN24 32BLEN32 2-1/8 ZHLW2-SS 4-1/8 ZHLW2-SS 4-1/4 ZHLW2-SS 5-1/8 ZHLW2-SS 5-1/4 ZHLW2-SS 6-1/4 ZHLW2-SS 6-3/8 ZHLW2-SS 6-1/2 ZHLW2-SS 8-3/8 ZHLW2-SS 8-1/2 ZHLW2-SS 8-3/4 ZHLW2-SS 10-1/2 ZHLW2-SS 12-3/4 ZHLW2-SS 16-1 ZHLW2-SS 20-1-1/4 ZHLW2-SS 24-1-1/2 ZHLW2-SS 2-2 Z-SSHLW-SS 4-4 Z-SSHLW-SS 6-6 Z-SSHLW-SS 8-8 Z-SSHLW-SS 12-12 Z-SSHLW-SS 16-16 Z-SSHLW-SS 20-20 Z-SSHLW-SS 24-24 Z-SSHLW-SS NA NA NA NA NA 2MA2N 2MA4N 3MA2N 3MA4N 4MA2N 4MA4N 4MA6N 4MA8N 5MA4N 6MA4N 6MA6N 6MA8N 8MA4N 8MA6N 8MA8N 10MA8N 12MA8N 12MA12N 16MA12N 16MA16N 20MA20N 24MA24N 2M2TU2 4M2TU4 6M2TU4 6M2TU6 8M2TU8 12M2TU12 16M2TU16 20M2TU20 24M2TU24 2FA2N 2FA4N 4FA2N 4FA4N 4FA6N 4FA8N 5FA4N 6FA4N 6FA6N 6FA8N 8FA4N 8FA6N 8FA8N
DCA 24 DCA 32 DCB 2-2 DCB 4-2 DCB 4-4 DCB 5-2 DCB 5-4 DCB 6-4 DCB 6-6 DCB 6-8 DCB 8-6 DCB 8-8 DCB 8-12 DCB 10-8 DCB 12-12 DCB 16-16 DCB 20-20 DCB 24-24 DCW 2 DCW 4 DCW 6 DCW 8 DCW 12 DCW 16 DCW 20 DCW 24 NA NA NA NA NA DHA 2-2 DHA 2-4 DHA 3-2 DHA 3-4 DHA 4-2 DHA 4-4 DHA 4-6 DHA 4-8 DHA 5-4 DHA 6-4 DHA 6-6 DHA 6-8 DHA 8-4 DHA 8-6 DHA 8-8 DHA 10-8 DHA 12-8 DHA 12-12 DHA 16-12 DHA 16-16 DHA 20-20 DHA 24-24 NA NA NA NA NA NA NA NA NA DHC 2-2 DHC 2-4 DHC 4-2 DHC 4-4 DHC 4-6 DHC 4-8 DHC 5-4 DHC 6-4 DHC 6-6 DHC 6-8 DHC 8-4 DHC 8-6 DHC 8-8
B r e n n a n I n d u st r ies Atlanta • Cleveland • Dallas • Los Angeles • Seattle
24CP 32CP 2CBW2 4CBW2 4CBW4 5CBW2 5CBW4 6CBW4 6CBW6 6CBW8 8CBW6 8CBW8 8CBW12 10CBW8 12CBW12 16CBW16 20CBW20 24CBW24 2CW2 4CW4 6CW6 8CW8 12CW12 16CW16 20CW20 24CW24 NA NA NA NA NA 2AM2 2AM4 3AM2 3AM4 4AM2 4AM4 4AM6 4AM8 5AM4 6AM4 6AM6 6AM8 8AM4 8AM6 8AM8 10AM8 12AM8 12AM12 16AM12 16AM16 20AM20 24AM24 NA NA NA NA NA NA NA NA NA 2AF2 2AF4 4AF2 4AF4 4AF6 4AF8 5AF4 6AF4 6AF6 6AF8 8AF4 8AF6 8AF8
LET-LOK
Hy-Lok
7108L-1-1/2-1/1/2 7108L-2-2 768LN-1/8-1/8 768LN-1/4-1/8 768LN-1/4-1/4 768LN-5/16-1/8 768LN-5/16-1/4 768LN-3/8-1/4 768LN-3/8-3/8 768LN-3/8-1/2 768LN-1/2-3/8 768LN-1/2-1/2 768LN-1/2-3/4 768LN-5/8-1/2 768LN-3/4-3/4 768LN-1-1 768LN-1-1/4-1-1/4 768LN-1-1/2-1/1/2 768LW-1/8-1/8 768LW-1/4-1/4 768LW-3/8-3/8 768LW-1/2-1/2 768LW-3/4-3/4 768LW-1-1 768LW-1-1/4-1-1/4 768LW-1-1/2-1/1/2 NA NA NA NA NA 739LM-1/8-1/8 739LM-1/8-1/4 739LM-3/16-1/8 739LM-3/16-1/4 739LM-1/4-1/8 739LM-1/4-1/4 739LM-1/4-3/8 739LM-1/4-1/2 739LM-5/16-1/4 739LM-3/8-1/4 739LM-3/8-3/8 739LM-3/8-1/2 739LM-1/2-1/4 739LM-1/2-3/8 739LM-1/2-1/2 739LM-5/8-1/2 739LM-3/4-1/2 739LM-3/4-3/4 739LM-1-3/4 739LM-1-1 739LM-1-1/4-1-1/4 739LM-1-1/2-1/1/2 NA NA NA NA NA NA NA NA NA 739LF-1/8-1/8 739LF-1/8-1/4 739LF-1/4-1/8 739LF-1/4-1/4 739LF-1/4-3/8 739LF-1/4-1/2 739LF-5/16-1/4 739LF-3/8-1/4 739LF-3/8-3/8 739LF-3/8-1/2 739LF-1/2-1/4 739LF-1/2-3/8 739LF-1/2-1/2
CCA-24 CCA-32 CWC-2-2P CWC-4-2P CWC-4-4P CWC-5-2P CWC-5-4P CWC-6-4P CWC-6-6P CWC-6-8P CWC-8-6P CWC-8-8P CWC-8-12P CWC-10-8P CWC-12-12P CWC-16-16P CWC-20-20P CWC-24-24P CSWC-2-2 CSWC-4-4 CSWC-6-6 CSWC-8-8 CSWC-12-12 CSWC-16-16 CSWC-20-20 CSWC-24-24 CAMF-4-4 CAMF-6-6 CAMF-8-8 CAMF-12-12 CAMF-16-16 CAM-2-2N CAM-2-4N NA NA CAM-4-2N CAM-4-4N CAM-4-6N CAM-4-8N CAM-5-4N CAM-6-4N CAM-6-6N CAM-6-8N CAM-8-4N CAM-8-6N CAM-8-8N CAM-10-8N CAM-12-8N CAM-12-12N CAM-16-12N CAM-16-16N CAM-20-20N CAM-24-24N CAOS-2-2U CAOS-4-4U CAOS-6-4U CAOS-6-6U CAOS-8-8U CAOS-12-12U CAOS-16-16U CAOS-20-20U CAOS-24-24U CAF-2-2N CAF-2-4N CAF-4-2N CAF-4-4N CAF-4-6N CAF-4-8N CAF-5-4N CAF-6-4N CAF-6-6N CAF-6-8N CAF-8-4N CAF-8-6N CAF-8-8N
37
Brennan No. Description Swagelok N2430-10-08 N2430-12-08 N2430-12-12 N2430-12-16 N2430-16-12 N2430-16-16 N2430-20-20 N2430-24-24 N2431-04-04 N2431-06-06 N2431-08-08 N2440-02-02 N2440-04-02 N2440-04-04 N2440-06-02 N2440-06-04 N2440-06-06 N2440-08-04 N2440-08-08 N2440-12-08 N2440-12-12 N2440-16-08 N2440-16-12 N2440-16-16 N2500-01-01 N2500-02-02 N2500-04-04 N2500-05-05 N2500-06-06 N2500-08-08 N2500-10-10 N2500-12-12 N2500-14-14 N2500-16-16 N2500-20-20 N2500-24-24 N2500-32-32 N2501-01-01 N2501-01-02 N2501-02-02 N2501-02-04 N2501-04-02 N2501-04-04 N2501-04-06 N2501-04-08 N2501-05-04 N2501-06-02 N2501-06-04 N2501-06-06 N2501-06-08 N2501-08-04 N2501-08-06 N2501-08-08 N2501-08-12 N2501-10-08 N2501-12-08 N2501-12-12 N2501-14-12 N2501-16-12 N2501-16-16 N2501-20-20 N2501-24-24 N2501-32-32 N2502-02-02 N2502-02-04 N2502-04-02 N2502-04-04 N2502-04-06 N2502-04-08 N2502-05-02 N2502-05-04 N2502-06-02 N2502-06-04 N2502-06-06 N2502-06-08
38
FNPT-STDPIPE FNPT-STDPIPE FNPT-STDPIPE FNPT-STDPIPE FNPT-STDPIPE FNPT-STDPIPE FNPT-STDPIPE FNPT-STDPIPE FGA-STDPIPE FGA-STDPIPE FGA-STDPIPE FERR-STDPIPE FERR-STDPIPE FERR-STDPIPE FERR-STDPIPE FERR-STDPIPE FERR-STDPIPE FERR-STDPIPE FERR-STDPIPE FERR-STDPIPE FERR-STDPIPE FERR-STDPIPE FERR-STDPIPE FERR-STDPIPE IN-IN 90 IN-IN 90 IN-IN 90 IN-IN 90 IN-IN 90 IN-IN 90 IN-IN 90 IN-IN 90 IN-IN 90 IN-IN 90 IN-IN 90 IN-IN 90 IN-IN 90 IN-MNPT 90 IN-MNPT 90 IN-MNPT 90 IN-MNPT 90 IN-MNPT 90 IN-MNPT 90 IN-MNPT 90 IN-MNPT 90 IN-MNPT 90 IN-MNPT 90 IN-MNPT 90 IN-MNPT 90 IN-MNPT 90 IN-MNPT 90 IN-MNPT 90 IN-MNPT 90 IN-MNPT 90 IN-MNPT 90 IN-MNPT 90 IN-MNPT 90 IN-MNPT 90 IN-MNPT 90 IN-MNPT 90 IN-MNPT 90 IN-MNPT 90 IN-MNPT 90 IN-FNPT 90 IN-FNPT 90 IN-FNPT 90 IN-FNPT 90 IN-FNPT 90 IN-FNPT 90 IN-FNPT 90 IN-FNPT 90 IN-FNPT 90 IN-FNPT 90 IN-FNPT 90 IN-FNPT 90
10-TA7-8 12-TA7-8 12-TA7-12 12-TA7-16 16-TA7-16 16-TA7-12 20-TA7-20 24-TA7-24 4-TA-7-4RG 6-TA-7-6RG 8-TA-7-8RG 201-PC 401-PC-2 401-PC 601-PC-2 601-PC-4 601-PC 811-PC-4 811-PC 1211-PC-8 1211-PC 1611-PC-8 1611-PC-12 1611-PC 100-9 200-9 400-9 500-9 600-9 810-9 1010-9 1210-9 1410-9 1610-9 2000-9 2400-9 3200-9 100-2-1 100-2-2 200-2-2 200-2-4 400-2-2 400-2-4 400-2-6 400-2-8 500-2-4 600-2-2 600-2-4 600-2-6 600-2-8 810-2-4 810-2-6 810-2-8 810-2-12 1010-2-8 1210-2-8 1210-2-12 1410-2-12 1610-2-12 1610-2-16 2000-2-20 2400-2-24 3200-2-32 200-8-2 200-8-4 400-8-2 400-8-4 400-8-6 400-8-8 500-8-2 500-8-4 600-8-2 600-8-4 600-8-6 600-8-8
Parker CPI 10-8 T2HG 12-8 T2HG 12-12 T2HG 12-16 T2HG 16-16 T2HG 16-12 T2HG 20-20 T2HG 24-24 T2HG NA NA NA 2-2 ZPC 2-4 ZPC 4-4 ZPC 2-6 ZPC 4-6 ZPC 6-6 ZPC 4-8 ZPC 8-8 ZPC 8-12 ZPC 12-12 ZPC 8-16 ZPC 12-16 ZPC 16-16 ZPC 1-1 EBZ 2-2 EBZ 4-4 EBZ 5-5 EBZ 6-6 EBZ 8-8 EBZ 10-10 EBZ 12-12 EBZ 14-14 EBZ 16-16 EBZ 20-20 EBZ 24-24 EBZ 32-32 EBZ 1-1 CBZ 1-2 CBZ 2-2 CBZ 2-4 CBZ 4-2 CBZ 4-4 CBZ 4-6 CBZ 4-8 CBZ 5-4 CBZ 6-2 CBZ 6-4 CBZ 6-6 CBZ 6-8 CBZ 8-4 CBZ 8-6 CBZ 8-8 CBZ 8-12 CBZ 10-8 CBZ 12-8 CBZ 12-12 CBZ 14-12 CBZ 16-12 CBZ 16-16 CBZ 20-20 CBZ 24-24 CBZ 32-32 CBZ 2-2 DBZ 2-4 DBZ 4-2 DBZ 4-4 DBZ 4-6 DBZ 4-8 DBZ 5-2 DBZ 5-4 DBZ 6-2 DBZ 6-4 DBZ 6-6 DBZ 6-8 DBZ
Parker A-LOK BI-LOK GYROLOK 10FA8N 12FA8N 12FA12N 12FA16N 16FA16N 16FA12N 20FA20N 24FA24N NA NA NA 2PC2 2PC4 4PC4 2PC6 4PC6 6PC6 4PC8 8PC8 8PC12 12PC12 8PC16 12PC16 16PC16 1EE1 2EE2 4EE4 5EE5 6EE6 8EE8 10EE10 12EE12 14EE14 16EE16 20EE20 24EE24 32EE32 1MSEL1N 1MSEL2N 2MSEL2N 2MSEL4N 4MSEL2N 4MSEL4N 4MSEL6N 4MSEL8N 5MSEL4N 6MSEL2N 6MSEL4N 6MSEL6N 6MSEL8N 8MSEL4N 8MSEL6N 8MSEL8N 8MSEL12N 10MSEL8N 12MSEL8N 12MSEL12N 14MSEL12N 16MSEL12N 16MSEL16N 20MSEL20N 24MSEL24N 32MSEL32N 2FEL2N 2FEL4N 4FEL2N 4FEL4N 4FEL6N 4FEL8N 5FEL2N 5FEL4N 6FEL2N 6FEL4N 6FEL6N 6FEL8N
DHC 10-8 DHC 12-8 DHC 12-12 DHC 12-16 DHC 16-16 DHC 16-12 DHC 20-20 DHC 24-24 NA NA NA DPC 2 DPC 4-2 DPC 4 DPC 6-2 DPC 6-4 DPC 6 DPC 8-4 DPC 8 DPC 12-8 DPC 12 DPC 16-8 DPC 16-12 DPC 16 DLA 1 DLA 2 DLA 4 DLA 5 DLA 6 DLA 8 DLA 10 DLA 12 DLA 14 DLA 16 DLA 20 DLA 24 DLA 32 DLN 1-1 DLN 1-2 DLN 2-2 DLN 2-4 DLN 4-2 DLN 4-4 DLN 4-6 DLN 4-8 DLN 5-4 DLN 6-2 DLN 6-4 DLN 6-6 DLN 6-8 DLN 8-4 DLN 8-6 DLN 8--8 DLN 8-12 DLN 10-8 DLN 12-8 DLN 12-12 DLN 14-12 DLN 16-12 DLN 16-16 DLN 20-20 DLN 24-24 DLN 32-32 DLF 2-2 DLF 2-4 DLF 4-2 DLF 4-4 DLF 4-6 DLF 4-8 DLF 5-2 DLF 5-4 DLF 6-2 DLF 6-4 DLF 6-6 DLF 6-8
B r e n n a n I n d u st r ies Atlanta • Cleveland • Dallas • Los Angeles • Seattle
10AF8 12AF8 12AF12 12AF16 16AF16 16AF12 20AF20 24AF24 NA NA NA 2PC 4PC2 4PC 6PC2 6PC4 6PC 8PC4 8PC 12PC8 12PC 16PC8 16PC12 16PC 1LU 2LU 4LU 5LU 6LU 8LU 10LU 12LU 14LU 16LU 20LU 24LU 32LU 1LM1 1LM2 2LM2 2LM4 4LM2 4LM4 4LM6 4LM8 5LM4 6LM2 6LM4 6LM6 6LM8 8LM4 8LM6 8LM8 8LM12 10LM8 12LM8 12LM12 14LM12 16LM12 16LM16 20LM20 24LM24 32LM32 2LF2 2LF4 4LF2 4LF4 4LF6 4LF8 5LF2 5LF4 6LF2 6LF4 6LF6 6LF8
LET-LOK 739LF-5/8-1/2 739LF-3/4-1/2 739LF-3/4-3/4 739LF-3/4-1 739LF-1-1 739LF-1-3/4 739LF-1-1/4-1-1/4 739LF-1-1/2-1/1/2 NA NA NA 767LP-1/8 767LM-1/4-1/8 767LP-1/4 767LM-3/8-1/8 767LM-3/8-1/4 767LP-3/8 767LM-1/2-1/4 767LP-1/2 767LM-3/4-1/2 767LP-3/4 767LM-1-1/2 767LM-1-3/4 767LP-1 765L-1/16-1/16 765L-1/8-1/8 765L-1/4-1/4 765L-5/16-5/16 765L-3/8-3/8 765L-1/2-1/2 765L-5/8-5/8 765L-3/4-3/4 765L-7/8-7/8 765L-1-1 765L-1-1/4-1-1/4 765L-1-1/2-1/1/2 765L-2-2 769L-1/16-1/16 769L-1/16-1/8 769L-1/8-1/8 769L-1/8-1/4 769L-1/4-1/8 769L-1/4-1/4 769L-1/4-3/8 769L-1/4-1/2 769L-5/16-1/4 769L-3/8-1/8 769L-3/8-1/4 769L-3/8-3/8 769L-3/8-1/2 769L-1/2-1/4 769L-1/2-3/8 769L-1/2-1/2 769L-1/2-3/4 769L-5/8-1/2 769L-3/4-1/2 769L-3/4-3/4 769L-7/8-3/4 769L-1-3/4 769L-1-1 769L-1-1/4-1-1/4 769L-1-1/2-1/1/2 769L-2-2 770L-1/8-1/8 770L-1/8-1/4 770L-1/4-1/8 770L-1/4-1/4 770L-1/4-3/8 770L-1/4-1/2 770L-5/16-1/8 770L-5/16-1/4 770L-3/8-1/8 770L-3/8-1/4 770L-3/8-3/8 770L-3/8-1/2
Hy-Lok CAF-10-8N CAF-12-8N CAF-12-12N CAF-12-16N CAF-16-16N CAF-16-12N CAF-20-20N CAF-24-24N CAF-4-4G CAF-6-6G CAF-8-8G CPC-2 CPR-4-2 CPC-4 CPR-6-2 CPR-6-4 CPC-6 CPR-8-4 CPC-8 CPR-12-8 CPC-12 CPR-16-8 CPR-16-12 CPC-16 CLA-1 CLA-2 CLA-4 CLA-5 CLA-6 CLA-8 CLA-10 CLA-12 CLA-14 CLA-16 CLA-20 CLA-24 CLA-32 CLMA-1-1N CLMA-1-2N CLMA-2-2N CLMA-2-4N CLMA-4-2N CLMA-4-4N CLMA-4-6N CLMA-4-8N CLMA-5-4N CLMA-6-2N CLMA-6-4N CLMA-6-6N CLMA-6-8N CLMA-8-4N CLMA-8-6N CLMA-8-8N CLMA-8-12N CLMA-10-8N CLMA-12-8N CLMA-12-12N CLMA-14-12N CLMA-16-12N CLMA-16-16N CLMA-20-20N CLMA-24-24N CLMA-32-32N CLF-2-2N CLF-2-4N CLF-4-2N CLF-4-4N CLF-4-6N CLF-4-8N CLF-5-2N CLF-5-4N CLF-6-2N CLF-6-4N CLF-6-6N CLF-6-8N
Cross Reference Chart Brennan No. Description Swagelok N2502-08-04 N2502-08-06 N2502-08-08 N2502-10-06 N2502-10-08 N2502-12-08 N2502-12-12 N2502-14-12 N2502-16-12 N2502-16-16 N2503-04-02 N2503-04-04 N2503-06-02 N2503-06-04 N2503-06-06 N2503-08-06 N2503-08-08 N2503-12-12 N2503-16-16 N2525-04-02 N2525-04-04 N2525-06-04 N2525-08-08 N2525-12-12 N2525-16-16 N2525-20-20 N2525-24-24 N2526-04-04 N2526-06-06 N2526-08-08 N2526-12-12 N2526-16-16 N2526-20-20 N2526-24-24 N2601-02-02-02 N2601-02-02-04 N2601-04-04-02 N2601-04-04-04 N2601-04-04-06 N2601-04-04-08 N2601-06-06-04 N2601-06-06-06 N2601-06-06-08 N2601-08-08-04 N2601-08-08-06 N2601-08-08-08 N2601-10-10-08 N2601-12-12-08 N2601-12-12-12 N2601-16-16-12 N2601-16-16-16 N2601-20-20-20 N2601-24-24-24 N2602-02-02-02 N2602-04-04-02 N2602-04-04-04 N2602-06-06-04 N2602-06-06-06 N2602-08-08-06 N2602-08-08-08 N2602-12-12-12 N2602-16-16-12 N2602-16-16-16 N2603-02-02-02 N2603-04-04-04 N2603-05-05-05 N2603-06-04-04 N2603-06-04-06 N2603-06-06-04 N2603-06-06-06 N2603-08-04-04 N2603-08-04-08 N2603-08-06-06 N2603-08-06-08 N2603-08-08-04
IN-FNPT 90 IN-FNPT 90 IN-FNPT 90 IN-FNPT 90 IN-FNPT 90 IN-FNPT 90 IN-FNPT 90 IN-FNPT 90 IN-FNPT 90 IN-FNPT 90 IN-MNPT 45 IN-MNPT 45 IN-MNPT 45 IN-MNPT 45 IN-MNPT 45 IN-MNPT 45 IN-MNPT 45 IN-MNPT 45 IN-MNPT 45 IN-BW 90 IN-BW 90 IN-BW 90 IN-BW 90 IN-BW 90 IN-BW 90 IN-BW 90 IN-BW 90 IN-SW 90 IN-SW 90 IN-SW 90 IN-SW 90 IN-SW 90 IN-SW 90 IN-SW 90 IN-IN-MNPT IN-IN-MNPT IN-IN-MNPT IN-IN-MNPT IN-IN-MNPT IN-IN-MNPT IN-IN-MNPT IN-IN-MNPT IN-IN-MNPT IN-IN-MNPT IN-IN-MNPT IN-IN-MNPT IN-IN-MNPT IN-IN-MNPT IN-IN-MNPT IN-IN-MNPT IN-IN-MNPT IN-IN-MNPT IN-IN-MNPT IN-IN-FNPT IN-IN-FNPT IN-IN-FNPT IN-IN-FNPT IN-IN-FNPT IN-IN-FNPT IN-IN-FNPT IN-IN-FNPT IN-IN-FNPT IN-IN-FNPT IN-IN-IN IN-IN-IN IN-IN-IN IN-IN-IN IN-IN-IN IN-IN-IN IN-IN-IN IN-IN-IN IN-IN-IN IN-IN-IN IN-IN-IN IN-IN-IN
810-8-4 810-8-6 810-8-8 1010-8-6 1010-8-8 1210-8-8 1210-8-12 1410-8-12 1610-8-12 1610-8-16 400-5-2 400-5-4 600-5-2 600-5-4 600-5-6 810-5-6 810-5-8 1210-5-12 1610-5-16 400-2-2W 400-2-4W 600-2-4W 810-2-8W 1210-2-12W 1610-2-16W 2000-2-20W 2400-2-24W 400-9-4W 600-9-6W 810-9-8W 1210-9-12W 1610-9-16W 2000-9-20W 2400-9-24W 200-3TTM 200-3-4TTM 400-3TTM 400-3-4TTM 400-3-6TTM 400-3-8TTM 600-3-4TTM 600-3-6TTM 600-3-8TTM 810-3-4TTM 810-3TTM 810-3-8TTM 1010-3TTM 1210-3-8TTM 1210-3TTM 1610-3-12TTM 1610-3TTM 2000-3-20TTM 2400-3-24TTM 200-3TTF 400-3TTF 400-3-4TTF 600-3TTF 600-3-6TTF 810-3TTF 810-3-8TTF 1210-3TTF 1610-3TTF 1610-3-16TTF 200-3 400-3 500-3 600-3-4-4 600-3-4-6 600-3-6-4 600-3 810-3-4-4 810-3-4-8 810-3-6-6 810-3-6-8 810-3-8-4
Parker CPI 8-4 DBZ 8-6 DBZ 8-8 DBZ 10-6 DBZ 10-8 DBZ 12-8 DBZ 12-12 DBZ 14-12 DBZ 16-12 DBZ 16-16 DBZ 4-2 VBZ 4-4 VBZ 6-2 VBZ 6-4 VBZ 6-6 VBZ 8-6 VBZ 8-8 VBZ 12-12 VBZ 16-16 VBZ 2-1/8 ZEBW2 4-1/4 ZEBW2 6-1/4 ZEBW2 8-1/2 ZEBW2 12-3/4 ZEBW2 16-1 ZEBW2 20-1-1/4 ZEBW2 24-1/2 ZEBW2 4-4 ZEBW 6-6 ZEBW 8-8 ZEBW 12-12 ZEBW 16-16 ZEBW 20-20 ZEBW 24-24 ZEBW 2-2-2 SBZ 2-2-4 SBZ 4-4-2 SBZ 4-4-4 SBZ 4-4-6 SBZ 4-4-8 SBZ 6-6-4 SBZ 6-6-6 SBZ 6-6-8 SBZ 8-8-4 SBZ 8-8-6 SBZ 8-8-8 SBZ 10-10-8 SBZ 12-12-8 SBZ 12-12-12 SBZ 16-16-12 SBZ 16-16-16 SBZ 20-20-20 SBZ 24-24-24 SBZ 2-2-2 OBZ 4-4-2 OBZ 4-4-4 OBZ 6-6-4 OBZ 6-6-6 OBZ 8-8-6 OBZ 8-8-8 OBZ 12-12-12 OBZ 16-16-12 OBZ 16-16-16 OBZ 2-2-2 JBZ 4-4-4 JBZ 5-5-5 JBZ 6-4-4 JBZ 6-4-6 JBZ 6-6-4 JBZ 6-6-6 JBZ 8-4-4 JBZ 8-4-8 JBZ 8-6-6 JBZ 8-6-8 JBZ 8-8-4 JBZ
Parker A-LOK BI-LOK GYROLOK 8FEL4N 8FEL6N 8FEL8N 10FEL6N 10FEL8N 12FEL8N 12FEL12N 14FEL12N 16FEL12N 16FEL16N 4MVEL2N 4MVEL4N 6MVEL2N 6MVEL4N 6MVEL6N 8MVEL6N 8MVEL8N 12MVEL12N 16MVEL16N 4-1/8 Z-SSELW2-SS 4-1/4 Z-SSELW2-SS 6-1/4 Z-SSELW2-SS 8-1/2 Z-SSELW2-SS 12-3/4 Z-SSELW2-SS 16-1 Z-SSELW2-SS 20-1-1/4 Z-SSELW2-SS 24-1-1/2 Z-SSELW2-SS 4-4 Z-SSELW-SS 6-6 Z-SSELW-SS 8-8 Z-SSELW-SS 12-12 Z-SSELW-SS 16-16 Z-SSELW-SS 20-20 Z-SSELW-SS 24-24 Z-SSELW-SS 2MBT2N 2MBT4N 4MBT2N 4MBT4N 4MBT6N 4MBT8N 6MBT4N 6MBT6N 6MBT8N 8MBT4N 8MBT6N 8MBT8N 10MBT8N 12MBT8N 12MBT12N 16MBT12N 16MBT16N 20MBT20N 24MBT24N 2FBT2N 4FBT2N 4FBT4N 6FBT4N 6FBT6N 8FBT6N 8FBT8N 12FBT12N 16FBT12N 16FBT16N 2ET2 4ET4 5ET5 6-4-4 JLZ-SS 6-4-6 JLZ-SS-SS 6-6-4 JLZ-SS-SS 6ET6 8-4-4 JLZ-SS-SS 8-4-8 JLZ-SS-SS 8-6-6 JLZ-SS-SS 8-6-8 JLZ-SS-SS 8-8-4 JLZ-SS-SS
DLF 8-4 DLF 8-6 DLF 8-8 DLF 10-6 DLF 10-8 DLF 12-8 DLF 12-12 DLF 14-12 DLF 16-12 DLF 16-16 NA NA NA NA NA NA NA NA NA DLB 4-2 DLB 4-4 DLB 6-4 DLB 8-8 DLB 12-12 DLB 16-16 DLB 20-20 DLB 24-24 DLW 4-4 DLW 6-6 DLW 8-8 DLW 12-12 DLW 16-16 DLW 20-20 DLW 24-24 DTN 2-2 DTN 2-4 DTN 4-2 DTN 4-4 DTN 4-6 DTN 4-8 DTN 6-4 DTN 6-6 DTN 6-8 DTN 8-4 DTN 8-6 DTN 8-8 DTN 10-8 DTN 12-8 DTN 12-12 DTN 16-12 DTN 16-16 DTN 20-20 DTN 24-24 DTH 2-2 DTH 4-2 DTH 4-4 DTH 6-4 DTH 6-6 DTH 8-6 DTH 8-8 DTH 12-12 DTH 16-12 DTH 16-16 DTA 2 DTA 4 DTA 5 DTR 6-4-4 DTR 6-4-6 DTR 6-6-4 DTA 6 DTR 8-4-4 DTR 8-4-8 DTR 8-6-6 DTR 8-6-8 DTR 8-8-4
B r e n n a n I n d u st r ies Atlanta • Cleveland • Dallas • Los Angeles • Seattle
8LF4 8LF6 8LF8 10LF6 10LF8 12LF8 12LF12 14LF12 16LF12 16LF16 4LMF2 4LMF4 6LMF2 6LMF4 6LMF6 8LMF6 8LMF8 12LMF12 16LMF16 4LBW2 4LBW4 6LBW4 8LBW8 12LBW12 16LBW16 20LBW20 24LBW24 4LW4 6LW6 8LW8 12LW12 16LW16 20LW20 24LW24 2TTM2 2TTM4 4TTM2 4TTM4 4TTM6 4TTM8 6TTM4 6TTM6 6TTM8 8TTM4 8TTM6 8TTM8 10TTM8 12TTM8 12TTM12 16TTM12 16TTM16 20TTM20 24TTM24 2TTF2 4TTF2 4TTF4 6TTF4 6TTF6 8TTF6 8TTF8 12TTF12 16TTF12 16TTF16 2TTT 4TTT 5TTT 6TTT4BR4 6TTT4BR6 6TTTB4 6TTT 8TTT4BR4 8TTT4BR8 8TTT6BR6 8TTT6BR8 8TTTB4
LET-LOK 770L-1/2-1/4 770L-1/2-3/8 770L-1/2-1/2 770L-5/8-3/8 770L-5/8-1/2 770L-3/4-1/2 770L-3/4-3/4 770L-7/8-3/4 770L-1-3/4 770L-1-1 NA NA NA NA NA NA NA NA NA 769LN-1/4-1/8 769LN-1/4-1/4 769LN-3/8-1/4 769LN-1/2-1/2 769LN-3/4-3/4 769LN-1-1 769LN-1-1/4-1-1/4 769LN-1-1/2-1/1/2 769LN-1/4-1/4 769LN-3/8-3/8 769LN-1/2-1/2 769LW-3/4-3/4 769LW-1-1 769LW-1-1/4-1-1/4 769LW-1-1/2-1/1/2 772L-1/8-1/8 772L-1/8-1/4 772L-1/4-1/8 772L-1/4-1/4 772L-1/4-3/8 772L-1/4-1/2 772L-3/8-1/4 772L-3/8-3/8 772L-3/8-1/2 772L-1/2-1/4 772L-1/2-3/8 772L-1/2-1/2 772L-5/8-1/2 772L-3/4-1/2 772L-3/4-3/4 772L-1-3/4 772L-1-1 772L-1-1/4-1-1/4 772L-1-1/2-1-1/4 772LF-1/8-1/8 772LF-1/4-1/8 772LF-1/4-1/4 772LF-3/8-1/4 772LF-3/8-3/8 772LF-1/2-3/8 772LF-1/2-1/2 772LF-3/4-3/4 772LF-1-3/4 772LF-1-1 764L-1/8 764L-1/4 764L-5/16 764LR-3/8-1/4-1/4 764LR-3/8-1/4-3/8 764LR-3/8-3/8-1/4 764L-3/8 764LR-1/2-1/4-1/4 764LR-1/2-1/4-1/2 764LR-1/2-3/8-3/8 764LR-1/2-3/8-1/2 764LR-1/2-1/2-1/4
Hy-Lok CLF-8-4N CLF-8-6N CLF-8-8N CLF-10-6N CLF-10-8N CLF-12-8N CLF-12-12N CLF-14-12N CLF-16-12N CLF-16-16N CLMB-4-2N CLMB-4-4N CLMB-6-2N CLMB-6-4N CLMB-6-6N CLMB-8-6N CLMB-8-8N CLMB-12-12N CLMB-16-16N CLW-2-2P CLW-4-4P CLW-6-4P CLW-8-8P CLW-12-12P CLW-16-16P CLW-20-20P CLW-24-24P CLSW-4-4 CLSW-6-6 CLSW-8-8 CLSW-12-12 CLSW-16-16 CLSW-20-20 CLSW-24-24 CBTM-2-2N CBTM-2-4N CBTM-4-2N CBTM-4-4N CBTM-4-6N CBTM-4-8N CBTM-6-4N CBTM-6-6N CBTM-6-8N CBTM-8-4N CBTM-8-6N CBTM-8-8N CBTM-10-8N CBTM-12-8N CBTM-12-12N CBTM-16-12N CBTM-16-16N CBTM-20-20N CBTM-24-24N CBTF-2-2N CBTF-4-2N CBTF-4-4N CBTF-6-4N CBTF-6-6N CBTF-8-6N CBTF-8-8N CBTF-12-12N CBTF-16-12N CBTF-16-16N CTA-2 CTA-4 CTA-5 CTR-6-4-4 CTR-6-4-6 CTR-6-6-4 CTA-6 CTR-8-4-4 CTR-8-4-8 CTR-8-6-6 CTR-8-6-8 CTR-8-8-4
39
Brennan No. Description Swagelok N2603-08-08-06 N2603-08-08-08 N2603-10-10-10 N2603-12-06-06 N2603-12-06-12 N2603-12-08-08 N2603-12-08-12 N2603-12-12-06 N2603-12-12-08 N2603-12-12-12 N2603-16-06-06 N2603-16-06-16 N2603-16-08-08 N2603-16-08-16 N2603-16-12-12 N2603-16-12-16 N2603-16-16-06 N2603-16-16-08 N2603-16-16-12 N2603-16-16-16 N2603-20-16-16 N2603-20-16-20 N2603-20-20-16 N2603-20-20-20 N2603-24-16-16 N2603-24-16-24 N2603-24-24-16 N2603-24-24-24 N2603-32-32-32 N2605-02-02-02 N2605-02-04-02 N2605-04-02-04 N2605-04-04-04 N2605-04-06-04 N2605-04-08-04 N2605-06-04-06 N2605-06-06-06 N2605-06-08-06 N2605-08-04-08 N2605-08-06-08 N2605-08-08-08 N2605-10-08-10 N2605-12-08-12 N2605-12-12-12 N2605-16-12-16 N2605-16-16-16 N2605-20-20-20 N2605-24-24-24 N2606-02-02-02 N2606-04-02-04 N2606-04-04-04 N2606-06-04-06 N2606-06-06-06 N2606-08-06-08 N2606-08-08-08 N2606-12-12-12 N2606-16-12-16 N2606-16-16-16 N2650-02-02-02-02 N2650-04-04-04-04 N2650-06-06-06-06 N2650-08-08-08-08 N2650-12-12-12-12 N2650-16-16-16-16 N2700-LN-01-01 N2700-LN-02-02 N2700-LN-04-02 N2700-LN-04-04 N2700-LN-05-05 N2700-LN-06-04 N2700-LN-06-06 N2700-LN-08-04 N2700-LN-08-06 N2700-LN-08-08 N2700-LN-10-10
40
IN-IN-IN IN-IN-IN IN-IN-IN IN-IN-IN IN-IN-IN IN-IN-IN IN-IN-IN IN-IN-IN IN-IN-IN IN-IN-IN IN-IN-IN IN-IN-IN IN-IN-IN IN-IN-IN IN-IN-IN IN-IN-IN IN-IN-IN IN-IN-IN IN-IN-IN IN-IN-IN IN-IN-IN IN-IN-IN IN-IN-IN IN-IN-IN IN-IN-IN IN-IN-IN IN-IN-IN IN-IN-IN IN-IN-IN IN-MNPT-IN IN-MNPT-IN IN-MNPT-IN IN-MNPT-IN IN-MNPT-IN IN-MNPT-IN IN-MNPT-IN IN-MNPT-IN IN-MNPT-IN IN-MNPT-IN IN-MNPT-IN IN-MNPT-IN IN-MNPT-IN IN-MNPT-IN IN-MNPT-IN IN-MNPT-IN IN-MNPT-IN IN-MNPT-IN IN-MNPT-IN IN-FNPT-IN IN-FNPT-IN IN-FNPT-IN IN-FNPT-IN IN-FNPT-IN IN-FNPT-IN IN-FNPT-IN IN-FNPT-IN IN-FNPT-IN IN-FNPT-IN IN-IN-IN-IN IN-IN-IN-IN IN-IN-IN-IN IN-IN-IN-IN IN-IN-IN-IN IN-IN-IN-IN INBH-IN INBH-IN INBH-IN INBH-IN INBH-IN INBH-IN INBH-IN INBH-IN INBH-IN INBH-IN INBH-IN
810-3-8-6 810-3 1010-3 1210-3-6-6 1210-3-6-12 1210-3-8-8 1210-3-8-12 1210-3-12-6 1210-3-12-8 1210-3 1610-3-6-6 1610-3-6-16 1610-3-8-8 1610-3-8-16 1610-3-12-12 1610-3-12-16 1610-3-16-6 1610-3-16-8 1610-3-16-12 1610-3 2000-3-16-16 2000-3-16-20 2000-3-20-16 2000-3 2400-3-16-16 2400-3-16-24 2400-3-16-16 2400-3 3200-3 200-3TMT 200-3-4TMT 400-3TMT 400-3-4TMT 400-3-6TMT 400-3-8TMT 600-3TMT 600-3-6TMT 600-3-8TMT 810-3-4TMT 810-3TMT 810-3-8TMT 1010-3TMT 1210-3-8TMT 1210-3TMT 1610-3-12TMT 1610-3TMT 2000-3TMT 2400-3TMT 200-3-2-TFT 400-3TFT 400-3-TFT 600-3-4TFT 600-3-6TFT 810-3TFT 810-3-8TFT 1210-3TFT 1610-3-12-TFT 1610-3TFT 200-4 400-4 600-4 810-4 1210-4 1610-4 100-61 200-61 400-61-2 400-61 500-61 600-61-4 600-61 810-61-4 810-61-6 810-61 1010-61
Parker CPI 8-8-6 JBZ 8-8-8 JBZ 10-10-10 JBZ 12-6-6 JBZ 12-6-12 JBZ 12-8-8 JBZ 12-8-12 JBZ 12-12-6 JBZ 12-12-8 JBZ 12-12-12 JBZ 16-6-6 JBZ 16-6-16 JBZ 16-8-8 JBZ 16-8-16 JBZ 16-12-12 JBZ 16-12-16 JBZ 16-16-6 JBZ 16-16-8 JBZ 16-16-12 JBZ 16-16-16 JBZ 20-16-16 JBZ 20-16-20 JBZ 20-20-16 JBZ 20-20-20 JBZ 24-16-16 JBZ 24-16-24 JBZ 24-24-16 JBZ 24-24-24 JBZ 32-32-32 JBZ 2-2-2 RBZ 2-4-2 RBZ 4-2-4 RBZ 4-4-4 RBZ 4-6-4 RBZ 4-8-4 RBZ 6-4-6 RBZ 6-6-6 RBZ 6-8-6 RBZ 8-4-8 RBZ 8-6-8 RBZ 8-8-8 RBZ 10-8-10 RBZ 12-8-12 RBZ 12-12-12 RBZ 16-12-16 RBZ 16-16-16 RBZ 20-20-20 RBZ 24-24-24 RBZ 2-2-2 MBZ 4-2-4 MBZ 4-4-4 MBZ 6-4-6 MBZ 6-6-6 MBZ 8-6-8 MBZ 8-8-8 MBZ 12-12-12 MBZ 16-12-16 MBZ 16-16-16 MBZ 2 KBZ 4 KBZ 6KBZ 8 KBZ 12 KBZ 16 KBZ 1-1 WBZ 2-2 WBZ 4-2 WBZ 4-4 WBZ 5-5 WBZ 6-4 WBZ 6-6 WBZ 8-4 WBZ 8-6 WBZ 8-8 WBZ 10-10 WBZ
Parker A-LOK BI-LOK GYROLOK 8-8-6 JLZ-SS-SS 8ET8 10 ET10 12-6-6 JLZ-SS-SS 12-6-12 JLZ-SS-SS 12-8-8 JLZ-SS-SS 12-8-12 JLZ-SS-SS 12-12-6 JLZ-SS-SS 12-12-8 JLZ-SS-SS 12ET12 16-6-6 JLZ-SS-SS 16-6-16 JLZ-SS-SS 16-8-8 JLZ-SS-SS 16-8-16 JLZ-SS-SS 16-12-12 JLZ-SS-SS 16-12-16 JLZ-SS-SS 16-16-6 JLZ-SS-SS 16-16-8 JLZ-SS-SS 16-16-12 JLZ-SS-SS 16ET16 20-16-16 JLZ-SS-SS 20-16-20 JLZ-SS-SS 20-20-16 JLZ-SS-SS 20ET20 24-16-16 JLZ-SS-SS 24-16-24 JLZ-SS-SS 24-24-16 JLZ-SS-SS 24ET24 32ET32 2MRT2N 2MRT4N 4MRT2N 4MRT4N 4MRT6N 4MRT8N 6MRT4N 6MRT6N 6MRT8N 8MRT4N 8MRT6N 8MRT8N 10MRT8N 12MRT8N 12MRT12N 16MRT12N 16MRT16N 20MRT20N 24MRT24N 2FRT2N 4FRT2N 4FRT4N 6FRT4N 6FRT6N 8FRT6N 8FRT8N 12FRT12N 16FRT12N 16FRT16N 2ECR2 4ECR4 6ECR6 8ECR8 12ECR12 16ECR16 1BC1 2MBC2N 4MBC2N 4MBC4N 5MBC5 6MBC4 6MBC6 8MBC4 8MBC6N 8MBC8N 10BC10
DTR 8-8-6 DTA 8 DTA 10 DTR 12-6-6 DTR 12-6-12 DTR 12-8-8 DTR 12-8-12 DTR 12-12-6 DTR 12-12-8 DTA 12 DTR 16-6-6 DTR 16-6-16 DTR 16-8-8 DTR 16-8-16 DTR 16-12-12 DTR 16-12-16 DTR 16-16-6 DTR 16-16-8 DTR 16-16-12 DTA 16 DTR 20-16-16 DTR 20-16-20 DTR 20-20-16 DTA 20 DTR 24-16-16 DTR 24-16-24 DTR 24-24-16 DTA 24 DTA 32 DTK 2-2 DTK 2-4 DTK 4-2 DTK 4-4 DTK 4-6 DTK 4-8 DTK 6-4 DTK 6-6 DTK 6-8 DTK 8-4 DTK 8-6 DTK 8-8 DTK 10-8 DTK 12-8 DTK 12-12 DTK 16-12 DTK 16-16 DTK 20-20 DTK 24-24 DTF 2-2 DTF 4-2 DTF 4-4 DTF 6-4 DTF 6-6 DTF 8-6 DTF 8-8 DTF 12-12 DTF 16-12 DTF 16-16 DXA 2 DXA 4 DXA 6 DXA 8 DXA 12 DXA 16 DSU 1 DSU 2 DSU 4-2 DSU 4 DSU 5 DSU 6-4 DSU 6 DSU 8-4 DSU 8-6 DSU 8 DSU 1
B r e n n a n I n d u st r ies Atlanta • Cleveland • Dallas • Los Angeles • Seattle
8TTTB6 8TTT 10TTT 12TTT6BR6 12TTT6BR12 12TTT8BR8 12TTTBR12 12TTTB6 12TTTB8 12TTT 16TTT6BR6 16TTT6BR16 16TTT8BR8 16TTT8BR16 16TTT12BR12 16TTT12BR16 16TTTB6 16TTTB8 16TTTB12 16TTT 20TTT16BR16 20TTT16BR20 20TTTB16 20TTT 24TTT16BR16 24TTT16BR24 24TTTB16 24TTT 32TTT 2TMT2 2TMT4 4TMT2 4TMT4 4TMT6 4TMT8 6TMT4 6TMT6 6TMT8 8TMT4 8TMT6 8TMT8 10TMT8 12TMT8 12TMT12 16TMT12 16TMT16 20TMT20 24TMT24 2TFT2 4TFT2 4TFT4 6TFT4 6TFT6 8TFT6 8TFT8 12TFT12 16TFT12 16TFT16 2C 4C 6C 8C 12C 16C 1BU 2BU 4BU2 4BU 5BU 6BU4 6BU6 8BU4 8BU6 8BU 10BU
LET-LOK 764LR-1/2-1/2-3/8 764L-1/2 764L-5/8 764LR-3/4-3/8-3/8 764LR-3/4-3/8-3/4 764LR-3/4-1/2-1/2 764LR-3/4-1/2-3/4 764LR-3/4-3/4-3/8 764LR-3/4-3/4-1/2 764L-3/4 764LR-1-3/8-3/8 764LR-1-3/8-1 764LR-1-1/2-1/2 764LR-1-1/2-1 764LR-1-3/4-3/4 764LR-1-3/4-1 764LR-1-1-3/8 764LR-1-1-1/2 764LR-1-1-3/4 764L-1 764LR-1 1/4-1-1 764LR-1 1/4-1-1/80 764LR-1 1/4-1-1/4-1 764L-1 1/4 764LR-1 1/2-1-1 764LR-1 1/2-1-1 1/4 764LR-1 1/2 1/1/2-1 764L-1 1/2 764L-2 771L-1/8-1/8 771L-1/8-1/4 771L-1/4-1/8 771L-1/4-1/4 771L-1/4-3/8 771L-1/4-1/2 771L-3/8-1/4 771L-3/8-3/8 771L-3/8-1/2 771L-1/2-1/4 771L-1/2-3/8 771L-1/2-1/2 771L-5/8-1/2 771L-3/4-1/2 771L-3/4-3/4 771L-1-3/4 771L-1-1 771L-1 1/4-1 1/4 771L-1 1/2 1/1/2 771LF-1/8-1/8 771LF-1/4-1/8 771LF-1/4-1/4 771LF-3/8-1/4 771LF-3/8-3/8 771LF-1/2-3/8 771LF-1/2-1/2 771LF-3/4-3/4 771LF-1-3/4 771LF-1-1 7102L-1/8 7102L-1/4 7102L-3/8 7102L-1/2 7102L-3/4 7102L-1 774L-1/16-1/16 774L-1/8-1/8 774L-1/4-1/8 774L-1/4-1/4 774L-5/16-5/16 774L-3/8-1/4 774L-3/8-3/8 774L-1/2-1/4 774L-1/2-3/8 774L-1/2-1/2 774L-5/8-5/8
Hy-Lok CTR-8-8-6 CTA-8 CTA-10 CTR-12-6-6 CTR-12-6-12 CTR-12-8-8 CTR-12-8-12 CTR-12-12-6 CTR-12-12-8 CTA-12 CTR-16-6-6 CTR-16-6-16 CTR-16-8-8 CTR-16-8-16 CTR-16-12-12 CTR-16-12-16 CTR-16-16-6 CTR-16-16-8 CTR-16-16-12 CTA-16 CTR-20-16-16 CTR-20-16-20 CTR-20-20-16 CTA-20 CTR-24-16-16 NA CTR-24-24-16 CTA-24 CTA-32 CRTM-2-2N CRTM-2-4N CRTM-4-2N CRTM-4-4N CRTM-4-6N CRTM-4-8N CRTM-6-4N CRTM-6-6N CRTM-6-8N CRTM-8-4N CRTM-8-6N CRTM-8-8N CRTM-10-8N CRTM-12-8N CRTM-12-12N CRTM-16-12N CRTM-16-16N CRTM-20-20N CRTM-24-24N CRTF-2-2N CRTF-4-2N CRTF-4-4N CRTF-6-4N CRTF-6-6N CRTF-8-6N CRTF-8-8N CRTF-12-12N CRTF-16-12N CRTF-16-16N CXA-2 CXA-4 CXA-6 CXA-8 CXA-12 CXA-16 CBU-1 CBU-2 CBUR-4-2 CBU-4 CBU-5 CBUR-6-4 CBU-6 CBUR-8-4 NA CBU-8 CBU-10
Cross Reference Chart Brennan No. Description Swagelok N2700-LN-12-12 INBH-IN N2700-LN-16-16 INBH-IN N2700-LN-20-20 INBH-IN N2700-LN-24-24 INBH-IN N2700-LN-32-32 INBH-IN N2701-LN-02-02 INBH-IN 90 N2701-LN-04-04 INBH-IN 90 N2701-LN-06-06 INBH-IN 90 N2701-LN-08-08 INBH-IN 90 N2701-LN-12-12 INBH-IN 90 N2701-LN-16-16 INBH-IN 90 N2705-LN-02-02 INBH-FNPT N2705-LN-04-02 INBH-FNPT N2705-LN-04-04 INBH-FNPT N2705-LN-06-04 INBH-FNPT N2705-LN-08-06 INBH-FNPT N2705-LN-08-08 INBH-FNPT N2705-LN-10-08 INBH-FNPT N2705-LN-12-08 INBH-FNPT N2705-LN-12-12 INBH-FNPT N2705-LN-16-12 INBH-FNPT N2705-LN-16-16 INBH-FNPT N2705-LN-20-20 INBH-FNPT N2705-LN-24-24 INBH-FNPT N2706-LN-02-02 INBH-MNPT N2706-LN-04-02 INBH-MNPT N2706-LN-04-04 INBH-MNPT N2706-LN-06-04 INBH-MNPT N2706-LN-06-06 INBH-MNPT N2706-LN-06-08 INBH-MNPT N2706-LN-08-06 INBH-MNPT N2706-LN-08-08 INBH-MNPT N2706-LN-12-12 INBH-MNPT N2706-LN-16-16 INBH-MNPT N2706-LN-20-20 INBH-MNPT N2706-LN-24-24 INBH-MNPT N2707-LN-04-04 N2707-LN-06-06 N2707-LN-08-08 N2707-LN-12-12 N2707-LN-16-16 N2709-LN-02-02 INBH-STDPIPE N2709-LN-04-04 INBH-STDPIPE N2709-LN-06-06 INBH-STDPIPE N2709-LN-08-08 INBH-STDPIPE N2709-LN-10-10 INBH-STDPIPE N2709-LN-16-16 INBH-STDPIPE N2709-LN-20-20 INBH-STDPIPE N2709-LN-24-24 INBH-STDPIPE N6400-02-02-O IN-MORB N6400-04-04-O IN-MORB N6400-05-05-O IN-MORB N6400-06-04-O IN-MORB N6400-06-06-O IN-MORB N6400-06-08-O IN-MORB N6400-08-06-O IN-MORB N6400-08-08-O IN-MORB N6400-08-10-O IN-MORB N6400-12-08-O IN-MORB N6400-12-12-O IN-MORB N6400-16-16-O IN-MORB N6400-20-20-O IN-MORB N6400-24-24-O IN-MORB N6801-04-04-NWO IN-MAORB 90 N6801-04-06-NWO IN-MAORB 90 N6801-06-06-NWO IN-MAORB 90 N6801-06-08-NWO IN-MAORB 90 N6801-08-08-NWO IN-MAORB 90 N6801-10-10-NWO IN-MAORB 90 N6801-12-12-NWO IN-MAORB 90 N6801-14-14-NWO IN-MAORB 90 N6801-16-16-NWO IN-MAORB 90 N6801-20-20-NWO IN-MAORB 90 N6801-24-24-NWO IN-MAORB 90 N6802-04-04-NWO IN-MAORB 45
1210-61 1610-61 2000-61 2400-61 3200-61 NA NA NA NA NA NA 200-71-2 400-71-2 400-71-4 600-71-4 810-71-6 810-71-8 1010-71-8 1210-71-8 1210-71-12 1610-71-12 1610-71-16 2000-71-20 2400-71-24 200-11-2 400-11-2 400-11-4 600-11-4 600-11-6 600-11-8 810-11-6 810-11-8 1210-11-12 1610-11-16 2000-11-20 2400-11-24 400-61-4AN 600-61-6AN 810-61-8AN 1210-61-12AN 1610-61-16AN 200-R1-2 400-R1-4 600-R1-6 810-R1-8 1010-R-10 1610-R1-16 2000-R1-20 2400-R1-24 200-1-2ST 400-1-4-ST 500-1-5-ST 600-1-4-ST 600-1-6-ST 600-1-8-ST 810-1-6-ST 810-1-8-ST 810-1-10-ST 1210-1-8-ST 1210-1-12-ST 1610-1-16-ST 2000-1-20-ST 2400-1-24-ST 400-2-4ST 400-2-6ST 600-2-6ST 600-2-8ST 810-2-8ST 1010-2-10ST 1210-2-12ST 1410-2-14ST 1610-2-16ST 2000-2-20ST 2400-2-24ST 400-5-4ST
Parker CPI 12-12 WBZ 16-16 WBZ 20-20 WBZ 24-24 WBZ 32-32 WBZ NA NA NA NA NA NA 2-2 GH2BZ 4-2 GH2BZ 4-4 GH2BZ 6-4 GH2BZ 8-6 GH2BZ 8-8 GH2BZ 10-8 GH2BZ 12-8 GH2BZ 12-12 GH2BZ 16-12 GH2BZ 16-16 GH2BZ 20-20 GH2BZ 24-24 GH2BZ 2-2 FH2BZ 4-2 FH2BZ 4-4 FH2BZ 6-4 FH2BZ 6-6 FH2BZ 6-8 FH2BZ 8-6 FH2BZ 8-8 FH2BZ 12-12 FH2BZ 16-16 FH2BZ 20-20 FH2BZ 24-24 FH2BZ 4-4 XH2BZ 6-6 XH2BZ 8-8 XH2BZ 12-12 XH2BZ 16-16 XH2BZ 2-2 T2H2BZ 4-4 T2H2BZ 6-6 T2H2BZ 8-8 T2H2BZ 10-10 T2H2BZ 16-16 T2H2BZ 20-20 T2H2BZ 24-24 T2H2BZ 2-2 ZHBA 4-4 ZHBA 5-5 ZHBA 6-4 ZHBA 6-6 ZHBA 6-8 ZHBA 8-6 ZHBA 8-8 ZHBA 8-10 ZHBA 12-8 ZHBA 12-12 ZHBA 16-16 ZHBA 20-20 ZHBA 24-24 ZHBA 4-4 C5BZ 4-6 C5BZ 6-6 C5BZ 6-8 C5BZ 8-8 C5BZ 10-10 C5BZ 12-12 C5BZ 14-14 C5BZ 16-16 C5BZ 20-20 C5BZ 24-24 C5BZ 4-4 V5BZ
Parker A-LOK BI-LOK GYROLOK 12BC12 16BC16 20BC20 24BC24 32BC32 NA NA NA NA NA NA 2FBC2N 4FBC2N 4FBC4N 6FBC4N 8FBC6N 8FBC8N 10FBC8N 12FBC8N 12FBC12N 16FBC12N 16FBC16N 20FBC20N 24FBC24N 2MBC2N 4MBC2N 4MBC4N 6MBC4N 6MBC6N 6MBC8N 8MBC6N 8MBC8N 12MBC12N 16MBC16N 20MBC20N 24MBC24N 4XABC4 6XABC6 8XABC8 12XABC12 16XABC16 2TUBC2 4TUBC4 6TUBC6 8TUBC8 10TUBC10 16TUBC16 20TUBC20 24TUBC24 2M1SC2 4M1SC4 5M1SC5 6MOSC4 6M1SC6 6M1SC8 8M1SC6 8M1SC8 8M1SC10 12M1SC8 12M1SC12 16M1SC16 20M1SC20 24M1SC24 4M5SEL4 4M5SEL6 6M5SEL6 6M5SEL8 8M5SEL8 10M5SEL10 12M5SEL12 14M5SEL14 16M5SEL16 20M5SEL20 24M5SEL24 4M5VEL4
DSU 12 DSU 16 DSU 20 DSU 24 DSU 32 DSL 2 DSL 4 DSL 6 DSL 8 DSL 12 DSL 16 D 2-2 D 4-2 D 4-4 D 6-4 D 8-6 D 8-8 D 10-8 D 12-8 D 12-12 D 16-12 D 16-16 D 20-20 D 24-24 DSC 2-2 DSC 4-2 DSC 4-4 DSC 6-4 DSC 6-6 DSC 6-8 DSC 8-6 DSC 8-8 DSC 12-12 DSC 16-16 DSC 20-20 DSC 24-24 DUE 4-4 DUE 6-6 DUE 8-8 DUE 12-12 DUE 16-16 DSE 2 DSE 4 DSE 6 DSE 8 DSE 10 DSE 16 DSE 20 DSE 24 DCU 2-2 DCU 4-4 DCU 5-5 DCU 6-4 DCU 6-6 DCU 6-8 DCU 8-6 DCU 8-8 DCU 8-10 DCU 12-8 DCU 12-12 DCU 16-16 DCU 20-20 DCU 24-24 NA NA NA NA NA NA NA NA NA NA NA NA
B r e n n a n I n d u st r ies Atlanta • Cleveland • Dallas • Los Angeles • Seattle
12BU 16BU 20BU 24BU 32BU NA NA NA NA NA NA 2BCF2 4BCF2 4BCF4 6BCF4 8BCF6 8BCF8 10BCF8 12BCF8 12BCF12 16BCF12 16BCF16 20BCF20 24BCF24 2BCM2 4BCM2 4BCM4 6BCM4 6BCM6 6BCM8 8BCM6 8BCM8 12BCM12 16BCM16 20BCM20 24BCM24 4BUAN4 6BUAN6 8BUAN8 12BUAN12 16BUAN16 2BA2 4BA4 6BA6 8BA8 10BA10 16BA16 20BA20 24BA24 2UANO2 4UANO4 5UANO5 6UANO4 6UANO6 6UANO8 8UANO6 8UANO8 8UANO10 12UANO8 12UANO12 16UANO16 20UANO20 24UANO24 4LMS4 4LMS6 6LMS6 6LMS8 8LMS8 10LMS10 12LMS12 14LMS14 16LMS16 20LMS20 24LMS24 4LMFS4
LET-LOK 774L-3/4-3/4 774L-1-1 774L-1 1/4-1 1/4 774L-1 1/2-1 1/2 774L-2-2 NA NA NA NA NA NA 774LF-1/8-1/8 774LF-1/4-1/8 774LF-1/4-1/4 774LF-3/8-1/4 774LF-1/2-3/8 774LF-1/2-1/2 774LF-5/8-1/2 774LF-3/4-1/2 774LF-3/4-3/4 774LF-1-3/4 774LF-1-1 774LF-1 1/4-1 1/4 774LF-1 1/2-1 1/2 774LM-1/8-1/8 774LM-1/4-1/8 774LM-1/4-1/4 774LM-3/8-1/4 774LM-3/8-3/8 774LM-3/8-1/2 774LM-1/2-3/8 774LM-1/2-1/2 774LM-3/4-3/4 774LM-1-1 774LM-1 1/4-1 1/4 774LM-1 1/2-1 1/2 774LFL-1/4-1/4 774LFL-3/8-3/8 774LFL-1/2-1/2 774LFL-3/4-3/4 774LFL-1-1 774LT-1/8-1/8 774LT-1/4-1/4 774LT-3/8-3/8 774LT-1/2-1/2 774LT-5/8-5/8 774LT-1-1 774LT-1 1/4-1 1/4 774LT-1 1/2-1 1/2 768LOB-1/8-1/8 768LOB-1/4-1/4 768LOB-5/16-5/16 768LOB-3/8-1/4 768LOB-3/8-3/8 768LOB-3/8-1/2 768LOB-1/2-3/8 768LOB-1/2-1/2 768LOB-1/2-5/8 768LOB-3/4-1/2 768LOB-3/4-3/4 768LOB-1-1 768LOB-1 1/4-1 1/4 768LOB-1 1/2-1 1/2 NA NA NA NA NA NA NA NA NA NA NA NA
Hy-Lok CBU-12 CBU-16 CBU-20 CBU-24 CBU-32 NA NA NA NA NA NA CBFC-2-2N CBFC-4-2N CFBC-4-4N CBFC-6-4N CBFC-8-6N CBFC-8-8N CBFC-10-8N NA CBFC-12-12N NA CBFC-16-16N CBFC-20-20N CBFC-24-24N CBMC-2-2N CBMC-4-2N CBMC-4-4N CBMC-6-4N CBMC-6-6N CBMC-6-8N CBMC-8-6N CBMC-8-8N CBFC-12-12N CBMC-16-16N CBMC-20-20N CBMC-24-24N CBFU-4-4 CBFU-6-6 CBFU-8-8 CBFU-12-12 CBFU-16-16 CBR-2-2 CBR-4-4 CBR-6-6 CBR-8-8 CBR-10-10 CBR-16-16 CBR-20-20 CBR-24-24 CSC-2-2U CSC-4-4U CSC-5-5U CSC-6-4U CSC-6-6U CSC-6-8U CSC-8-6U CSC-8-8U CSC-8-10U CSC-12-8U CSC-12-12U CSC-16-16U CSC-20-20U CSC-24-24U CSLA-4-4U CSLA-4-6U CSLA-6-6U CSLA-6-8U CSLA-8-8U CSLA-10-10U CSLA-12-12U CSLA-14-14U CSLA-16-16U CSLA-20-20U CSLA-24-24U CSLB-4-4U
41
Brennan No. Description Swagelok N6802-06-06-NWO N6802-08-08-NWO N6802-12-12-NWO N6802-16-16-NWO N6803-04-04-04-NWO N6803-06-06-06-NWO N6803-08-08-08-NWO N6803-12-12-12-NWO N6803-16-16-16-NWO N6803-20-20-20-NWO N6803-24-24-24-NWO N6804-04-04-04-NWO N6804-06-06-06-NWO N6804-08-08-08-NWO N6804-12-12-12-NWO N6804-16-16-16-NWO N6804-20-20-20-NWO N6804-24-24-24-NWO N7002-02-02 N7002-02-04 N7002-04-02 N7002-04-04 N7002-04-06 N7002-04-08 N7002-06-02 N7002-06-04 N7002-06-06 N7002-06-08 N7002-08-04 N7002-08-06 N7002-08-08 N7002-12-08 N7002-12-12 N7002-16-08 N7002-16-12 N7002-16-16
42
IN-MAORB 45 IN-MAORB 45 IN-MAORB 45 IN-MAORB 45 IN-IN-MAORB IN-IN-MAORB IN-IN-MAORB IN-IN-MAORB IN-IN-MAORB IN-IN-MAORB IN-IN-MAORB IN-MAORB-IN IN-MAORB-IN IN-MAORB-IN IN-MAORB-IN IN-MAORB-IN IN-MAORB-IN IN-MAORB-IN IN-BSPP IN-BSPP IN-BSPP IN-BSPP IN-BSPP IN-BSPP IN-BSPP IN-BSPP IN-BSPP IN-BSPP IN-BSPP IN-BSPP IN-BSPP IN-BSPP IN-BSPP IN-BSPP IN-BSPP IN-BSPP
600-5-6ST 810-5-8ST 1210-5-12ST 1610-5-16ST 400-3TTS 600-3TTS 810-3TTS 1210-3TTS 1610-3TTS 2000-3TTS 2400-3TTS 400-3TST 600-3TST 810-3TST 1210-3TST 1610-3TST 2000-3TST 2400-3TST 200-1-2RS 200-1-4RS 400-1-2RS 400-1-4RS 400-1-6RS 400-1-8RS 600-1-2RS 600-1-4RS 600-1-6RS 600-1-8RS 810-1-4RS 810-1-6RS 810-1-8RS 1210-1-8RS 1210-1-12RS 1610-1-8RS 1610-1-12RS 1610-1-16RS
Parker CPI 6-6 V5BZ 8-8 V5BZ 12-12 V5BZ 16-16 V5BZ 4-4 S5BZ 6-6 S5BZ 8-8 S5BZ 12-12 S5BZ 16-16 S5BZ 20-20 S5BZ 24-24 S5BZ 4-4-4 R5BZ 6-6-6 R5BZ 8-8-8 R5BZ 12-12-12 R5BZ 16-16-16 R5BZ 20-20-20 R5BZ 24-24-24 R5BZ 2-2R FBZ 2-4R FBZ 4-2R FBZ 4-4R FBZ 4-6R FBZ 4-8R FBZ 6-2R FBZ 6-4R FBZ 6-6R FBZ 6-8R FBZ 8-4R FBZ 8-6R FBZ 8-8R FBZ 12-8R FBZ 12-12R FBZ 16-8R FBZ 16-12R FBZ 16-16R FBZ
Parker A-LOK BI-LOK GYROLOK 6M5VEL6 8M5VEL8 12M5VEL12 16M5VEL16 4M5BT4 6M5BT6 8M5BT8 12M5BT12 16M5BT16 20M5BT20 24M5BT24 4M5RT4 6M5RT6 8M5RT8 12M5RT12 16M5RT16 20M5RT20 24M5RT24 2MSC2R 2MSC4R 4MSC2R 4MSC4R 4MSC6R 4MSC8R 6MSC2R 6MSC4R 6MSC6R 6MSC8R 8MSC4R 8MSC6R 8MSC8R 12MSC8R 12MSC12R 16MSC8R 16MSC12R 16MSC16R
NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA
B r e n n a n I n d u st r ies Atlanta • Cleveland • Dallas • Los Angeles • Seattle
6LMFS6 8LMFS8 12LMFS12 16LMFS16 4TTS4 6TTS6 8TTS8 12TTS12 16TTS16 20TTS20 24TTS24 4TST4 6TST6 8TST8 12TST12 16TST16 20TST20 24TST24 2CM2EB 2CM4EB 4CM2EB 4CM4EB 4CM6EB 4CM8EB 6CM2EB 6CM4EB 6CM6EB 6CM8EB 8CM4EB 8CM6EB 8CM8EB 12CM8EB 12CM12EB 16CM8EB 16CM12EB 16CM16EB
LET-LOK
Hy-Lok
NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA
CSLB-6-6U CSLB-8-8U CSLB-12-12U CSLB-16-16U CSBT-4-4U CSBT-6-6U CSBT-8-8U CSBT-12-12U CSBT-16-16U CSBT-20-20U CSBT-24-24U CSRT-4-4U CSRT-6-6U CSRT-8-8U CSRT-12-12U CSRT-16-16U CSRT-20-20U CSRT-24-24U CMC-2N-2G CMC-2N-4G CMC-4N-2G CMC-4N-4G CMC-4N-6G CMC-4N-8G CMC-6N-2G CMC-6N-4G CMC-6N-6G CMC-6N-8G CMC-8N-4G CMC-8N-6G CMC-8N-8G CMC-12N-8G CMC-12N-12G CMC-16N-8G CMC-16N-12G CMC-16N-16G
43
O-Ring Face Seal/Flat Face Fittings • Flareless Bite Type Fittings Push-to-Connect Fittings • Tube Fittings & Adapters Conversion Adapters • Metric Bite Type Fittings• NWD • Test Points Hydraulic Flanges • Instrumentation Tube Fittings
6701 Cochran Road • Solon, Ohio 44139 U.S.A. Phone: 440.248.1880 • Toll Free: 888.331.1523 Fax: 440.248.7282 • www.brennaninc.com
DISTRIBUTION CENTERS California 11-A Goodyear Irvine, California 92618
Georgia 5369 Penn Circle Decatur, Georgia 30035
Ohio 30205 Solon Road Solon, Ohio 44139
Texas 1189 108th Street Grand Prairie, Texas 75050
Washington 1516 45th Street E. Sumner, Washington 98390
Phone: 949.595.0901 Fax: 949.595.0933 Toll Free: 1.800.942.5321
Phone: 770.981.8451 Fax: 770.987.0926 Toll Free: 1.800.458.1988
Phone: 440.248.7088 Fax: 440.248.9375 Toll Free: 1.800.331.1523
Phone: 972.988.8311 Fax: 972.660.6638 Toll Free: 1.800.443.9937
Phone: 253.826.2001 Fax: 253.826.4884 Toll Free: 1.800.445.7107 Z-211
