Truma RV Catalogue 2017

heating | cooling | controlling heating | cooling | controlling

Warranty All products are covered by generous Dometic warranty and backed by our extensive national network.

Contents Truma iNet System Intelligent device control Truma CP plus and Truma iNet Box

Heating systems Trumatic E 2400 AUS Truma Combi 4 E AUS/ Truma Combi 2 E AUS Truma Combi D 6 AUS Truma Combi / Trumatic E: Installation overview Truma Combi: Product overview Truma Combi: Accessories Truma Combi D 6: Product overview Truma Combi D 6: Accessories Trumatic E: Product overview Trumatic E: Accessories Trumatic E: Warm air kits Trumatic E: Accessories Accessories Truma heating systems

4–5 6–7

9 9 9 9 10 11 12 – 14 15 16 – 17 18 18 19 20 21

Water systems Truma AquaGo® Truma UltraRapid® Truma UltraRapid®: Installation overview Truma UltraRapid®: Accessories

24 – 31 32 – 33 34 35

Gas supply Truma LevelCheck

37

Air conditioning systems Comfortable climate tailor-made Aventa air distributor Sealing frame Aventa Suggestions for air distribution Truma iNet Box Truma Aventa comfort Truma Saphir comfort RC Truma Aventa: Product overview Truma Aventa: Accessories Truma Saphir: Product overview Truma Saphir: Accessories Accessories for cold air distribution

39 40 40 41 42 43 43 44 44 45 45 46

heating | cooling | controlling

|3

Intelligent device control, maximum comfort Truma iNet System: Control your air conditioner via the App It couldn’t be easier: While you’re relaxing on your lounger at the beach, you can switch on the air conditioner in your motor home from your smartphone. The iNet System by Truma is making this possible. Control the air conditioning and heating systems in your vehicle simply, at any time and from anywhere. The Truma iNet System consists of the following: • The Truma iNet Box as the system’s core. • iNet-capable Truma devices, such as Aventa or Saphir air conditioners and/or a Combi heater with control panel CP plus. • The free Truma App on your smartphone or tablet.

Control your air conditioning and heating systems with the free Truma App. Enjoy automatic climate control by combining a Combi heater with a control panel Truma CP plus iNet ready and a Truma air conditioner. It doesn’t matter how hot or cold it is outside: your vehicle will always welcome you with your personal feel-good temperature. The Truma App The App offers other useful camping tools. And ensures you always have the operating instructions for all your devices, as well as additional useful tutorials to hand. Download the Truma App to your smartphone or tablet free of charge from the App Store or from Google Play: www.truma.com/app.

How the Truma iNet System works The Truma iNet Box is the central control unit for your Truma devices. It networks the air conditioner and heater with your smartphone, receives the control commands and routes them to the devices. Remote control is via SMS, or Bluetooth if the device is within range. www.truma.com/inet

4

|

heating | cooling | controlling

|5

For the ideal feel-good climate Truma CP plus and Truma iNet Box Truma CP plus Control your Truma air conditioning system and/or Combi heater with the digital control panel Truma CP plus. Choose the temperature, adjust the fan or set the functions of your air conditioner or heater with the time switch. Truma iNet Box The Truma iNet Box is the intelligent interface that allows you to control your Truma devices conveniently while you are on the move from your smartphone via SMS – or via Bluetooth if you are within range. For example, to control the temperature in your vehicle, all you need is the free Truma App. The Truma iNet Box is easy to install and can be retrofitted for all iNet-capable Truma air conditioning systems and Combi heaters.

6

|

Truma automatic climate control The automatic climate control maintains your preferred feel-good temperature in any weather. The control panel Truma CP plus automatically coordinates the Truma air conditioner and Combi heater, ensuring you always have the ideal temperature in your RV.

Truma CP plus

Truma iNet Box

Digital control panel for air conditioning systems and Combi heater The digital control panel Truma CP plus allows you to set the room and water temperature in your vehicle quickly and easily. Choose functions like fan speeds or the time switch instantly.

Central control unit for Truma devices The Truma iNet Box serves as the Truma iNet System’s core. It networks your Truma devices, like the air conditioning system and/or the Combi heater, with your smartphone or tablet. Monitor and control your iNet-capable devices – which are marked as “Truma iNet ready” – conveniently via the App.

• Intuitive operation: With practical rotary pushbutton and large backlit display. • Time switch: The right room temperature set at all times. • Automatic climate control: Ensures a constant indoor temperature in all weathers.

• Convenient: Enables remote control and monitoring of your Truma air conditioning and heating systems via your smartphone or tablet. • Easy to install: Simply install and start up with the Truma App. • Versatile: Can be controlled simultaneously from up to four mobile devices. • Exclusive: Available from your Truma Partner.

Technical data • Power supply: 8 – 16.5 V • Power consumption: max. 65 mA (100% background lighting), 6.5 – 10 mA (standby) • Quiescent current consumption: 3 mA (Off) • Dimensions: 92 x 103 x 40 mm (L x W x H) • Weight: approx. 100 g

Truma CP plus digital control panel

Part no. 36021-01

Technical data • Power supply: 12 V/24 V • Voltage range: min. 8 V, max. 30 V • Average power consumption: 40 mA (12 V), 20 mA (24 V) • SIM card type: Mini-SIM (25 x 15 mm) • Interfaces: TIN Bus (2 x TIN1 replaceable, 1 x TIN2), GSM, Bluetooth • Bluetooth: Class 2 • Dimensions: 147 x 96 x 40 mm (L x W x H) • Weight: approx. 150 g Truma iNet Box

Part no. 36400-01

all dimensions in mm

heating | cooling | controlling

|7

Truma Combi 4 (E) AUS / 6 (E) AUS

Gas powered ducted air heating system Compact and flexible with 2400 W of heating power. Requires little space and can be installed in virtually any position, completely automatic operation thanks to the electronic control unit. The Trumatic E 2400 is the perfect, reliable and safe heater for motor­homes, caravans and camper vans.

One device, two functions Enjoy twice the comfort in your caravan or motor home: Heat the vehicle and water with just one device. The trusted Combi heater requires little space, works very economically and is also available as a powerful diesel variant. Warm air is distributed throughout the vehicle optimally through four air outlets.

HEATING SYSTEMS

Trumatic E 2400 AUS

Air and water heating in one

SAI Global approved

• Electronic control unit. • Maintenance free operation. • Very low 12 volt consumption. • Flexible installation positions.

Technical data

E 2400 AUS

Thermal output

2400 watts

Control circuit voltage

12 volts

Standby current

0.01 A

Gas consumption

170 g/h

Air flow rate

78 m3/h

Weight (incl. periph. devices)

6,7 kg

Weight (excl. periph. devices)

5 kg

• Heating and warm water in one device. • Large heat output from 4,000 W or 2,000 W. • Energy-efficient and environmentally friendly heating technology with the highest level of efficiency of 97 %. • Automatic climate control in combination with a Truma air conditioner. • Watermark certified. • Truma iNet ready.

Part no. 37112-02

Combi 4 E AUS Combi 2 E AUS

Technical data

Part no. 33713-27 Part no. 33113-27

see page 11

Combi D 6 AUS The diesel variant Enjoy all of the advantages of the well-tried Combi heater, but with diesel operation*. Technical data

Combi D 6 AUS

Part no. 33504-27

see page 15

Contents, specifications and availability are subject to change serving the technical improvement.

More information: www.truma.com.au heating | cooling | controlling

|9

Combi 4E / 2E AUS installation overview Here you can see a graphical example of how Truma heating systems are installed and the accessories ­recommended for them. 11

1.  Combi 2.  CP plus digital control panel 3.  Room temperature sensor 4.  Wall cowl 5.  Warm air duct ÜR 65 6.  T-pipe LT / end outlet EN 7.  Elbow BG 8.  End outlet nut EM / end outlet EN 9.  Wall outlet vent WL 10.  Towel dryer 11.  Water hose, drinking water compatible 12.  Drain valve ABO (not in the drawing) 13.  Pressure reducer (not in the drawing)

20

2

5

3 10

8 1 9 4 6

7

Trumatic E 2400 AUS installation overview 3

2 8

4

7

8

6 5

1

10

|



1.  Trumatic E 2400 AUS 2.  Control panel 3.  Room temperature sensor 4.  Time switch ZUE 2 5.  Wall cowl 6.  Warm air duct VR 80 7.  Y-pipe 80 8.  Swivelling air outlet SCW

Combi 4E / 2E AUS: Product overview HEATING SYSTEMS

Liquid gas and electric heaters with water boiler Heater (without waste gas discharge) complete with room thermostat, CP plus digital control panel with 6 m cable, fastening parts, drain valve and elbow fittings for 10 mm Ø water hoses. Watermark certified. Product

Part no.

Description

33713-27

Combi 4 E CP plus AU, JG 2.75 kPa, 12 V, with electric heater 240 V, Truma iNet ready

33113-27

Combi 2 E CP plus AU, JG 2.75 kPa, 12 V, with electric heater 240 V, Truma iNet ready

350*

500*

Technical details

10*

10* 500* 10*

540*

* Minimum installation dimensions in mm (please ensure that there is enough room for installation and servicing work to be carried out)

Type of gas LPG (Liquefied Petroleum Gas – propane / butane) Operating pressure 2.75 kPa (see type plate) Water volume 10 litres Heating up time from approx. 15 °C to approx. 60 °C (measured according to EN 15033) Hot water system approx. 23 minutes Heater + hot water system Pump pressure System pressure Nominal input (Propane) Combi 2 E CP plus (Australia) Combi 4 E CP plus (Australia) Thermal output Electrical operation (240 V) Mixed operation (gas and electrical) Gas operation (Combi 2 E CP plus / Combi 4 E CP plus) Gas consumption (Propane) Combi 2 E CP plus (Australia) Combi 4 E CP plus (Australia) Air delivery volume (free-blowing without hot-air pipe) with 3 hot-air outlets with 4 hot-air outlets Current input at 12 V (Heater + hot water system) Short-term Heating up of hot water system Stand-by Current input of 240 V Weight (not containing water) Heater unit Heater unit with peripheral devices

approx. 90 min. max. 0.28 MPa max. 0.45 MPa 6.9 MJ/h 13.6 MJ/h 980 W / 1960 W max. 3900 W max. 1950 W / max. 3900 W 130 g/h 130 – 260 g/h max. 249 m³/h max. 287 m³/h max. 5.6 A (average power consumption 1.1 A) 0.4 A 0.001 A 4.1 A (980 W) or 8.1 A (1960 W) 16.2 kg 16.8 kg

heating | cooling | controlling

| 11

Accessories Combi 4E / 2E AUS Waste gas discharge Product

Part no.

Description

Cowl kits and single cowl parts Wall cowl kit CW compl. with 1,1 m exhaust duct, 1 m air supply duct and clamps (without cover) 36230-01

Wall cowl kit CW, cream

36230-05

Wall cowl kit CW, bianco

36230-07

Wall cowl kit CW, dusty grey

36230-08

Wall cowl kit CW, light grey

36230-09

Wall cowl kit CW, black

36230-10

Wall cowl kit CW, anthracite

Wall cowl WKC, compl. (without cover or ducts)

12

|

36130-01

Wall cowl WKC, cream

36130-05

Wall cowl WKC, bianco

36130-07

Wall cowl WKC, dusty grey

36130-08

Wall cowl WKC, light grey

36130-09

Wall cowl WKC, black

36130-10

Wall cowl WKC, anthracite

36130-11

Wall cowl WKC, basalt grey

34122-01

Roof cowl kit CD complete with 3 m exhaust duct, 3 m air supply duct and clamps

34051-01

Roof cowl DKC 2, cream complete (without ducts)

39320-00

Exhaust duct AA 3, Ø 55 mm (per metre)

39580-00

Air supply duct ZR 80, Ø 80 mm (per metre)

39590-00

Clamp ZRS, Ø 80 mm

34070-01

Cowl extension KVC 30 cm

34080-01

Cowl leadthrough SDDF, cream for protective double roofs

Accessories Combi 4E / 2E AUS Product

Part no.

Description

36400-01

Truma iNet Box Power supply 12 V / 24 V Average power consumption 40 / 20 mA (12 / 24 V) SIM card type Mini-SIM Interfaces TIN bus (2 x TIN 1 replaceable, 1 x TIN 2) GSM, Bluetooth Bluetooth Class 2 Operating temperature range - 30 °C to + 60 °C Weight (without accessories) approx. 150 g

36021-01

Truma CP plus digital control panel, Truma iNet ready

34030-39300

Surface-mounted frame CP plus, black

34030-35600

Cover CP plus, black

36120-01

TIN distributer for connecting two appliances

HEATING SYSTEMS

General accessories

Cable variants for Combi and Combi E control panel 36110-01

Control panel cable, 3 m

36110-02

Control panel cable, 6 m

36110-03

Control panel cable, 9 m

70020-55900

Pressure reducer, 12mm

70070-01

FrostControl heating element with 1.5 m cable,for faster boiler filling, independently of the room temperature

heating | cooling | controlling

| 13

Accessories Combi 4E / 2E AUS General accessories Product

Part no.

Description

Window switch: For connection to the automatic shut-off device on Combi (E) and Trumatic C 6002 EH In addition to the window switch, an automatic shut-off device is also required for Trumatic C. 30 cm

30

Note: The window switch is needed alongside the automatic shut off device if the cowl has been installed beneath an opening window or up to 30 cm away from it (complies with EN 1949).

cm

14

|

34030-34700

Window switch universal for all of the most popular knockout windows in caravans

34091-01

Elbow BGC, black for direct connection to the warm air outlets (outlet for Ø 65 or Ø 72 mm ducts)

34310-01

Blank cover CB, black for closing a warm air outlet on the Combi 4 (E)

34000-81800

U-clips kit Essential when using warm air duct VR 72, Ø 72 mm

Combi D 6: Product overview HEATING SYSTEMS

Diesel heater with hot water generator Heater (without wall cowl and duct set for waste gas discharge) complete with room thermostat, control panel with 6 m cable, fastenings, FrostControl currentless drain valve, elbow fittings for Ø 10 mm water hoses, fuel routing including metering pump and fuel tank removal kit TES 01 standard. Models with water connections for semi-rigid piping (John Guest System) available on request. Watermark certified. Product

Part no.

Description

33504-27

Combi D 6 CP plus AU 12 V, Truma iNet ready

350*

500*

Technical details

10*

10* 500*

10*

Heats water from approx. 15 °C to approx. 60 °C (as per EN 15033) Air flow rate Power consumption (12 V): Heater + hot water system Heating hot water system Stand-by Fuel Water volume Pump pressure System pressure Rated thermal output Weight without water Without peripherals With peripherals Rated thermal output in electrical operation Power consumption (at 230 V) Burner stages Rated thermal output Diesel consumption

540*

* Minimum installation dimensions in mm (please ensure that there is enough room for installation and servicing work)

Hot water system approx. 20 min, Heater + hot water system approx. 80 min Max. 287 m³/h 1.8–7 A (during normal operation) Max. 1.8 A Approx. 0.001 A Diesel as per EN 590 10 litres Max. 280 kPa Max. 450 kPa 2000 / 4000 / 6000 W Combi D 6 16.2 kg 17.6 kg – – Normal 1 operation** 1000 W 2000 W 110 ml/h 220 ml/h

2

3

4000 W 452 ml/h

6000 W 630 ml/h

** During normal operation at average heat output of 1000 W

Note: Vehicle-specific tank removal sets for facilitating connection of the Combi D 6 to the diesel tank are available from Truma on request.

heating | cooling | controlling

| 15

Combi D 6: Accessories Combi D 6: Installation Product

Part no.

Description

36400-01

Truma iNet Box Please see page 13 for technical data

36021-01

Truma CP plus digital control panel, Truma iNet ready

Note: See page 13 for surface-mounted frame CP plus, cover CP plus, TIN distributer and cable variants Individual parts for laying the fuel line: The heater’s scope of delivery includes an 8 m fuel line, 6 m cellular rubber hose, 10 hose holders and a replacement lock washer. 34020-69800

Fuel line (per meter)

34020-70000

Cellular rubber hose for acoustic insulation of the fuel line (per metre)

34020-76000

Hose holder, BPK 10 (10 pcs.)

Waste gas discharge for Combi D 6 Wall cowls and duct sets Wall cowl WKCD complete with extractor fan and connecting cable (without sound mufflers or exhaust ducts) 34400-02

Wall cowl WKCD, bianco

34400-03

Wall cowl WKCD, black

34400-04

Wall cowl WKCD, anthracite

34400-05

Wall cowl WKCD, pure white

Duct kit Combi D complete with sound mufflers for combustion air and waste gas, incl. lock washer and insulating duct. If the duct set needs to be shortened, you will need the lock washer tool to install the replacement lock washer, see “Miscellaneous” section.

16

|

34501-01

Duct kit Combi D, 60 cm

34501-02

Duct kit Combi D, 70 cm

34501-03

Duct kit Combi D, 100 cm

34501-04

Duct kit Combi D, 150 cm

Combi D 6: Accessories Product

Part no.

Description

70070-01

FrostControl heating element with 1.5 m cable, to fill the water container faster, independently of the room temperature

HEATING SYSTEMS

General accessories for Combi D 6

Cable variants for Combi D control panel

30 cm

36110-01

Control panel cable, 3 m

36110-02

Control panel cable, 6 m

36110-03

Control panel cable, 9 m

30

Note: The window switch is needed alongside the automatic shut off device if the cowl has been installed beneath an opening window or up to 30 cm away from it (complies with EN 1949).

cm

34030-34700

Window switch universal for all of the most popular knockout windows in caravans

Combi D 6: Warm air distribution 34091-01

Elbow BGC, black for direct connection to the warm air outlets (outlet for Ø 65 or Ø 72 mm ducts)

Note: See page 20 for more warm air distribution accessories for all Truma heating systems.

heating | cooling | controlling

| 17

Product overview: Trumatic E 2400 AUS Exhaust gas duct Trumatic E 2400 Product

Part no.

Description

Wall cowl kit EW 24 (without cover), compl. with 1 m exhaust duct, 1 m air supply duct and clips 39371-01

Wall cowl kit EW 24, cream

Cowl cover KKW-2 for wall cowls with date of manufacture as of 03/2001 39141-00

Cowl cover KKW-2, cream

Accessories Trumatic E 2400 AUS Exhaust gas duct Trumatic E 2400 Product

Part no.

Wall cowl WK 24 (without ducts)

WK 24

39381-01

AA 24

Description

Wall cowl WK 24, cream

ÜS ZR 24

Warm air distribution Trumatic E 2400 39490-00

Elbow BG 80, black For Ø 80 mm ducts

39610-00

Y-pipe 80, black Inlet Ø 80 mm, outlet 2x Ø 65/72 mm

39540-00

T-piece 80, black Inlet Ø 80 mm, outlet 2x Ø 65/72 mm

39500-01

Air distributer LR 80, black Inlet Ø 80 mm, outlet 2x Ø 65/72 mm and 1x Ø 49 mm

The way in which warm air will be distributed is designed for each individual type of vehicle.

18

|

Warm air kits for Trumatic E 2400 AUS Product

Part no. 39050-08400

HEATING SYSTEMS

Warm air basic kit Description 1x Wall cowl kit EW 24, cream

1x Duct VR Ø 80 mm, 1m, outer Ø 80 mm, inner Ø 76 mm

2x Swivel air outlet SCW 2, black

1x Cowl cover KKW-2, cream

1x Surface-mounting frame (not illustrated) Warm air additional kit

Part no. 39050-08800

1x Swivel air outlet SCW 2, black

1x Y-pipe 80, black inlet Ø 80 mm, outlet 2x Ø 72 mm

1x Duct VR Ø 72 mm x 3 meters in one length 4x Clamp ÜS 5, grey, Ø 72 - 75 mm to suit VR 72 Warm air under vehicle Product

Part no.

Description

40730-01

Insulating elbow, black for Ø 65 mm ducts Insulated elbow for guiding air underneath the floor and back again (2 elbows required)

40681-00

Duct DRI, Ø 75 mm, 2m an insulated air duct

40261-01

Clamp ÜS 5, grey, Ø 72-75 mm

heating | cooling | controlling

| 19

Accessories Trumatic E 2400 AUS General accessories for Trumatic E 2400 Product

Part no.

Description

39890-00

Time switch ZUE, 12 V / 24 V compl. with mounting frame and 4 m cable

39010-78300

Extension cable for ZUE, 4 m

Remote sensor, compl. with cable, for monitoring the room temperature regardless of the position of the control panel 39010-77300

Remote sensor FF with cable 4 m

39010-77400

Remote sensor FF with cable 10 m

39050-41700

Remote sensor FF 2 For monitoring the room temperature, regardless of the position of the control panel (not suitable for use in loading compartments), please order cable as well

34000-71900

Cable for remote sensor FF 2, 4 m

39010-78200

Multiple box MSD With 0.3 m connecting cable for connecting multiple accessories such as time switch and remote sensor

Window switch: A window switch and automatic shut-off equipment are also required for Trumatic E heaters. 30 cm

30

Note: The window switch is also needed to automatically shut off the device if the cowl has been installed beneath an opening window or up to 30 cm away from it (complies with EN 1949).

cm

20

|

34030-34700

Window switch universal for all of the most popular knockout windows in caravans

39050-00800

Automatic shut-off device Trumatic E

Accessories for Truma heating systems Product

Part no.

Description

40230-00

Duct ÜR, Ø 65 mm air duct, per metre

40241-01

Clamp ÜS, grey, Ø 65 mm

40151-02

T-pipe LT, agate grey for ducts Ø 65 mm or Ø 72 mm

40181-01

End outlet nut EM, agate grey

HEATING SYSTEMS

Warm air distribution

End outlet EN with air throttle, suitable for T-pipe LT, end outlet nut EM and Ø 65 mm ducts 40171-01

End outlet EN, agate grey

40171-05

End outlet EN, black

End outlet EN-O without air throttle, for lamella inset LA 40171-07

End outlet EN-O, agate grey

Lamella inset LA for attaching to end outlet EN-O, direction of air flow can be adjusted by turning 40721-05

Lamella inset LA, black

Swivel air outlet SCW 2, non-closable air outlet for Trumatic E and Combi (D), for Ø 80 mm, 72 mm or Ø 65 mm ducts 39971-01

Swivel air outlet SCW 2, black

40151-01

T-piece TS, agate grey for air ducts Ø 65 mm or Ø 72 mm

40191-01

Y-piece, agate grey for air ducts Ø 65 mm or Ø 72 mm

39010-76400

Elbow BG, black for air ducts Ø 65 mm or Ø 72 mm

40161-01

Straight coupling, agate grey for air ducts Ø 65 mm or Ø 72 mm

heating | cooling | controlling

| 21

WATER SYSTEMS

Truma AquaGo® – a new generation of instant water heaters Truma has developed a new generation of instant water heaters that are perfectly balanced to enhance the comfort of RVers on the road. Customers whose vehicles are equipped with the new Truma AquaGo® will have a comfortable water temperature, while enjoying an unlimited supply of hot water without the risk of scalding.

Constant hot water availability in recreational vehicles. SAI Global approved

Available Models • Truma AquaGo® comfort * • Truma AquaGo® comfort plus * For true hot water comfort • Hybrid technology with constant temperature – no scalding • Most powerful and efficient instant water heater • Endless hot water even at high flow rates • All-season use with optional anti-freeze function Unique features • The only instant water heater utilizing hybrid technology with a patent pending temperature stabilizer – Adjust temperature like at home for greater comfort – When showering, a constant hot water temperature is maintained even after the water is turned off, then back on again no more scalding – Hot water directly from the faucet at any time – Can be used even during freezing temperatures • The most powerful water heater on the market – Constant water temperature, even with high and low flow rates – Microprocessor controlled stepless burner management between 5.9 - 17.6 kW • Intuitive operation, like at home – Electronic control delivers constant water outlet temperature even with varying inlet water temperatures • Simple maintenance with “Easy Drain Lever” – Integrated water diverter eliminates water stains on vehicle exterior – Reusable filter cartridge reduces scale particulates * Patent pending

24

|

Installation cutout

Width

318 mm (12.5 in.)

Width

324 mm (12.75 in.)

Height

318 mm (12.5 in.)

Height

324 mm (12.75 in.)

Depth

394 mm (15.5 in.)

WATER SYSTEMS

Appliance dimensions (without flange and mounting frame)

Installation depth Appliance dimensions (including flange)

Minimum

450 mm

(17.7 in.)

500 mm

(19.7 in.)

Width

374mm (14.72 in.)

Recommended >

Height

374mm (14.72 in.)

depends on application

324

mm

0mm

450 mm > 50

mm

374 mm 318 mm

318

mm

394 mm 324 mm

374

Technical data

Truma AquaGo® comfort / Truma AquaGo® comfort plus

Nominal input rate

5.9 - 17.6 kW (20,000 - 60,000 BTU/h)

Fuel

LP Gas (Propane only)

Fuel inlet pressure

26.2 - 34.9 mbar (10.5“ - 14“ wc)

Fuel manifold pressure

3.2 - 24.9 mbar (1.3“ - 10“ wc)

Nominal voltage

12 V DC

Power input

< 2.5 A

Standby current

< 0.045 A

Water operating data Water operating pressure

4.5 bar (65 psi maximum)

Standard water outlet temperature

49 °C (120 °F)

Water volume

1.3 liter (0.35 gallons)

Shipping weight (approximately)

18.6 kg (41.0 lbs.)

Weight (approximately)

15.5 kg (34.2 lbs.)

Technical data

Access door standard

Width

450 mm (17.7 in.)

Height

450 mm (17.7 in.)

Depth

20.2 mm (0.8 in.)

Shipping weight (approximately)

2.0 kg (4.4 Ibs.)

Weight (approximately)

1.3 kg (2.9 lbs.)

heating | cooling | controlling

| 25

Truma AquaGo® Draining water is easy Truma developed a novel valve mechanism “Easy Drain Lever”, that greatly simplifies the process of fully draining the Truma AquaGo® instant water heater before winter or other extended periods of non-use. With the water system in a non-pressurized state, simply release the yellow “Easy Drain Lever” on the front side of the appliance with your thumb and move it downward to its position of maximum deflection. The “Easy Drain Lever” serves as a drainage chute that guides the water away from the vehicle. The “Easy Drain Lever” opens the water lines in the appliance and simultaneously ejects the filter cartridge. The water in the appliance can now drain completely. There is no need to flush the appliance with compressed air in order to remove residual water. If desired, the filter cartridge can be removed in order to inspect the filter screen; or it can remain in the appliance.

Cleaning the filter is easy After draining the water from the Truma AquaGo® instant water heater (see preceding description), the filter cartridge can be easily pulled out and the filter cleaned if necessary. The filter protects the appliance from dirt particles in the water circuit. To re-install the filter cartridge, simply slide it into the appliance until it contacts the “Easy Drain Lever”; then re-close.

26

|

WATER SYSTEMS

Decalcification via Easy Drain Lever The Truma AquaGo® is simple to decalcify via the standard Easy Drain Lever maintenance and accessory interface. Advantage: Water flow and, consequently, efficiency remain at the same level as a new device. Due to the design of instant water heaters, their narrow pipe cross-section tends to calcify relatively quickly, depending on the water hardness and the flow rate of the water. Semi-automatic decalcification drain • The standard control panel shows when it is advisable to decalcify the device (depending on water consumption). • The specially developed Truma decalcification tablets, which have been optimized for material compatibility and effectiveness, are placed in the filter sieve of the Easy Drain Lever. • The control panel guides you through the decalcification process. Truma AquaGo® decalcification tablets Truma decalcification tablets have been specially developed and optimized for material compatibility and effectiveness.

Truma AquaGo® decalcification tablets

Control Panel Truma CP classic AquaGo® Advanced TIN bus communication between the device and control panel – No intervention in the device’s power supply necessary • Familiar operating modes “Comfort On”, “Eco On”, and “Off” (Standby) – can be selected conveniently from inside the vehicle using the external control panel • Status display / error messages via LED • Semi-automatic decalcification function “Clean” – An LED indicates when it is advisable to decalcify the device – LED signals guide you through the semi-automatic decalcification process

Control Panel Truma CP classic AquaGo®

heating | cooling | controlling

| 27

Truma AquaGo® – Product overview Truma AquaGo® Product

Part no.

Description

78102-01

Truma AquaGo® comfort AU

78202-01

Truma AquaGo® comfort plus AU

77001-01

Access door standard, white

77001-02

Access door standard, black

77000-37500

Gasconnector Kit Elbow

77300-02

Truma AquaGo® decalcification tablets

Truma AquaGo® – Easy service Truma AquaGo® Robustness, a long service life, and simplicity of service were very high priorities during development of the Truma AquaGo® instant water heater. Should service or replacement of components be necessary, this can be completed without removing the entire appliance, unlike many other products of this type. Appliance components (1 - 5) can be easily maintained or replaced from the front side of the Truma AquaGo® instant water heater.

4

10

3

2

6

7

28

|

8

5

1

9 1 2 3 4 5 6 7 8 9 10

Burner Assembly Flue Fan Assembly Exhaust Pressure Switch Control Unit Assembly Filter Assembly Flow Sensor Assembly Circulation Pump Non-Return Valve Assembly Access Door Truma AquaGo® control panel

Truma AquaGo® – Spare parts Product

Part no.

4

1 Burner Assembly

77000-00175

2 Flue Fan Assembly

77000-90100

3 Exhaust Pressure Switch

77000-00113

4 Control Unit Assembly

77000-90800

5 Filter Assembly

77000-90500

6 Flow Sensor Assembly

5

77000-90600

7 Circulation Pump

10

77000-90700

8 Non-Return Valve Assembly

77000-91300

9 Electrodes

77000-00089

10 Truma CP classic AquaGo® control panel (Spare Part)

2 9

1

6

7

8

Description

77000-90400

3

WATER SYSTEMS

Truma AquaGo®

heating | cooling | controlling

| 29

Truma AquaGo® – Connection diagram Truma AquaGo® Truma AquaGo comfort Water and Gas - Application

Instant water heater

Faucet 1

Faucet 2

Shower

Hot water outlet

12 V DC < 1 Vpp Cold water inlet LP - Gas supply (Propane only)

Truma AquaGo comfort plus Water and Gas - Application

Instant water heater

Hot water outlet

Maximum pressure is 4,5 bar (65 psi) Inlet pressure 26.2 - 34.9 mbar (10.5" - 14" wc)

Faucet 1

Circulation line

Faucet 2

Shower

Functional description The Truma AquaGo® instant water heater is connected between the vehicle’s fresh water supply and its hot water plumbing system. When the appliance is switched on, the burner starts automatically as soon as the hot water faucet is opened and the flow of the water is greater than approximately 1.5 l per minute (0.4 gallons /min). The stepless burner control adjusts heater output based on flow and inlet water temperature, maintaining an outlet temperature of approximately 120 °F (49 °C).

A temperature stabilizer minimizes outlet temperature Cold water inlet Maximum pressure is 4,5 bar (65 psi) fluctuations. A comfortable water temperature at the faucet LP - Gas supply (Propane only) Inlet pressure 26.2 - 34.9 mbar (10.5" - 14" wc) or shower is achieved by mixing with cold water. The burner switches off automatically when the faucet is closed to conserve LP Gas. The Truma AquaGo® basic does not have frost protection and should not be used or filled with water when there is a danger of freezing. 12 V DC < 1 Vpp

The Truma AquaGo® comfort permits operation without risk of freezing down to a temperature of -20 °C (-4 °F). A standard on these model, the “ECO” mode saves gas and electricity. With the switch in the “COMFORT ON” position, temperature in the appliance is held at approx. 49 °C (120 °F) for maximum convenience (rapid availability of warm water at the faucet). Safety features • Three thermal cut-off switches protect the appliance from excessive temperatures. • A flame monitoring device switches off the gas supply to the burner if the flame is extinguished. • If voltage drops, the gas supply to the burner will be switched off. • In the event of a short circuit (>10 A), the fuse will switch off the appliance. • If the flue fan fails, the gas supply to the burner will be switched off. •A  water thermal cut-off switch avoids excessive water temperatures, i.e. above 85 °C (185 °F) inside the heat exchanger. • An exhaust-gas over temperature switch avoids excessive exhaust-gas temperatures, i.e. above 160 °C (320 °F).

30

|

Truma AquaGo® – Benchmark measurements WATER SYSTEMS

Truma AquaGo® Comparison of warm water outlet temperatures from typical instant water heaters versus the Truma AquaGo® instant water heater. 100

20

Typical instant water heater without “temperature stabilizer” (black line) : Extreme deviation from set-point (green line)

watertemperature [°C]

80

18 16

70

14

60

12

50

10

40

8

Truma AquaGo®: Moderate deviation with the “temperature stabilizer” (red line)

30

waterflow [l/min]

90

6

20

4

10

2 0

0 0,0

5,0

10,0

15,0

20,0

25,0

time [min] outlet water temp. TRUMA [°C]

outlet water temp. Without temp. stabilizer

Setpoint +2°C

set point T_water [°C]

Setpoint -2°C

water flow [l/min]

Detailed view of temperature curve when changing the water flow rate from approximately 6 l/min. to approximately 1 l/min. 100

20

90

18

Typical instant water heater without “temperature stabilizer” : Temperature-peak 91 °C (195 °F)!

16

70

14

60

12

50

10

40

8

30

waterflow [l/min]

watertemperature [°C]

80

6

Truma: Moderate temperature-rising

20

4

10

2

0

0 14,3

14,5

14,7

14,9

15,1

15,3

15,5

15,7

15,9

time [min] outlet water temp. TRUMA [°C]

outlet water temp. Without temp. stabilizer

set point T_water [°C]

water flow [l/min]

heating | cooling | controlling

| 31

Truma UltraRapid® Hot Water System Hot water the quicker way – showering, dishwashing, washing your hands – the Truma UltraRapid® Hot Water System (HWS) provides a reliable supply of hot water in leisure vehicles. Truma has now taken the development of the well-tried Truma UltraRapid® HWS further and adapted it to the continuously increasing demands of the standards. The Truma UltraRapid® HWS impresses with strong heating power, compact dimensions and its black modern design.

•S  trong heating element 1415 W (240 V) for shorter heat up and reheat time (Truma UltraRapid® Gas / Electric HWS). • Space saving dimensions and less weight than competitor products. • Only JG connections for easier and faster installation. • Modern design with black housing and black control panel. • Corrosion resistancy due to design and production change of the heating element and the water tank. • Warranty period of 24 months.

Product variant

Truma UltraRapid® Gas / Electric HWS  Part no. 73213-22

73213-22

1

32

|

Truma UltraRapid® Gas / Electric HWS, 14 L, JG1, water set, cream white cowl, control panel for gas / electric operation, black cover frame

) with John Guest system for rigid pipe installations (Ø 12 mm)

Product variant

Truma UltraRapid® Gas HWS Part no. 73213-02

73213-02

Truma UltraRapid® Gas HWS, 14 L, JG1, water set, cream white cowl, control panel for gas operation, black cover frame

Truma UltraRapid®

129

30

18

WATER SYSTEMS

168 cut out

324

Dimensions and technical details

Technical details

109

347 water connection PTR Valve connection

47

109

gas connection with test point

electronic

383

Heating times

Power supply Connection Output power 230 V / 240 V Power consumption Heating up 230 V / 240 V Power consumption 12 V Ignition Heating up Stand-by

347 water Truma UltraRapid® connection Hot Water System

Gas

cowl cut out

PTR Valve 14 litres connection

Liquid gas (Propane) 2.75 kPa 5.0 MJ/h 1.2 kW 96 g/h –

14 litres max. 2.8 bar max. 4.5 bar

– –

1300 W (5.7 A) / 1415 W (5.9 A)

12 V DC

0.16 A 0.12 A 0.05 A

7.7 kg

2.75 kPa 5.0 MJ/h 1.2 kW 96 g/h 230 V / 240 V AC, 50 Hz 12 V DC + 230 V / 240 V AC 1300 W (5.7 A) / 1415 W (5.9 A)

Heating up time from approx. 20 °C up to approx. 65 °C Mixed mode – Electrical mode – Gas mode approx. 45 min

Weight (excluding contents and accessory kits)

Truma UltraRapid® Gas / Electric Hot Water System

max. 2.8 bar max. 4.5 bar gas70 connection 60 °C or °C – electronic with test point John Guest system for rigid pipe installations (Ø 12 mm) 92

174

Water

Type of Gas Test point pressure Nominal input Heat output Gas consumption

Current

Contents Pump pressure System pressure Selectable temperature Connection

Gas

360

all dimensions in mm120 Min.

cut out

cowl 92

24

174

Min. 120

168 cut out

324 255

245

383

30

18

360

129

47

24

255

245

The new Truma UltraRapid® Hot Water System is the same height as the previous Boiler and there are only minimal differences in the length and the width.

0.16 A 0.12 A 0.05 A approx. 28 min approx. 40 min approx. 45 min 8.1 kg

The electric heating element in the water heater is supplied with a mains cable and fitted 3-pole, earthed plug (in compliance with the norm AS/NZS 3112/2000)

heating | cooling | controlling

| 33

Installation overview: Truma UltraRapid® Graphic Here you can see a graphical example of how Truma water comfort products and the recommended a ­ ccessories are installed. You will find technical details, part numbers and the complete range of accessories for our p ­ roducts on the pages that follow.



1.  Truma UltraRapid® Gas / Electric 2.  Control panel 3.  Drain valve ABO 4.  Water hose, drinking water compatible 5.  Non return valve

34

|



6.  Hose clip SC 7.  Pressure reducer 8.  City water connector 9.  240 V plug

Accessories 70020-55900

WATER SYSTEMS

Water supply Pressure reducer JG, 12 mm

Window switch: For connecting to the automatic shut-off equipment of the Combi D heater. 30 cm

30

Note: The window switch is also needed to automatically shut off the device if the cowl has been installed beneath an opening window or up to 30 cm away from it (complies with EN 1949).

cm

34030-34700

Window switch universal for all of the most popular knockout windows in caravans

heating | cooling | controlling

| 35

Truma LevelCheck GAS SUPPLY

Detects the filling level of your gas cylinders The practical LevelCheck uses LEDs for quick and reliable indication of whether there is liquid gas in the measured area. The measuring device is simply placed against the gas cylinder in a horizontal position.

• For all steel and aluminium LP gas cylinders with a diameter of 200 - 350 mm. • Reliable measurement using ultrasound • With integrated LED torch. • Not for plastic cylinders, butane cylinders (Campinggaz), gas tanks or refillable tank gas cylinders.

Technical data

LevelCheck 

Part no. 50500-02

Dimensions

135 mm x 35 mm x 30 mm

Weight

approx. 100 g

Power supply

block battery 9 V

Contents, specifications and availability are subject to change serving the technical improvement. 

More information: www.truma.com.au

heating | cooling | controlling

| 37

AIR CONDITIONING

Comfortable climate tailor-made by Truma Find your very own comfortable climate Truma’s powerful Aventa and Saphir air conditioning systems offer sophisticated technology for more comfort on the move. By cooling and dehumidifying the air inside your caravan or motorhome, they ensure a pleasant climate all year round. How do temperature and humidity influence your well-being? In order to make you feel comfortable in your vehicle, the balance between temperature and humidity must be perfect. This means the higher the room temperature, the lower the humidity should be. This is because it is easier for the body to give off excess heat into the room air if the air is dry. You are therefore always making the right choice with a Truma air conditioning system. After all, our systems cool the air extremely efficiently and also provide reliable dehumidification. How to select the perfect air conditioning system for your needs: The Aventa and Saphir air conditioning systems provide outstanding cooling comfort. This is because they are both based on the same outstanding Truma air conditioning expertise. Which one you choose is determined solely by your needs.

The Aventa roof-mounted air conditioning system

The Saphir underbunk system

• is mounted on the roof to save space and takes up very little space inside the vehicle for maximum ­freedom of movement.

• is installed in the storage compartment, and gives the vehicle a low centre of gravity.

• the Aventa comfort also allows you to heat using an energy-saving heat pump. • has an attractive appearance, both inside and outside.

• distributes the cool and the warm air individually and extremely flexibly in the vehicle. • makes minimum noise during cooling operation for more comfort at any time of day or night.

Contents, specifications and availability are subject to change serving the technical improvement. 

More information: www.truma.com.au

heating | cooling | controlling

| 39

Air distribution: Aventa roof-mounted air conditioning system

Air that is fresh, pleasant and distributed just where you want it Original Truma cooling comfort for roof mounting

Aventa air distributor • Extremely flat inside for more freedom of movement • Technically optimized for extremely quiet operation • Honeycomb-shaped air filter system cleans the air inside the vehicle • Dimmable LED ambient lighting • Available in two attractive colour combinations to complement the interior decor of your vehicle • Can be retrofitted quickly and easily in standard roof vent cut out of 400 x 400 mm

Air distributor, grey; Part no. 40801-02

Outstanding air distribution throughout the vehicle • Four air outlets that can be individually adjusted to the left and right • The air flow can be split so that specific quantities are fed into the front and rear areas of the vehicle • The air flow can be deflected from the ceiling to the floor

Sealing frame Aventa Exclusively for Aventa roof-mounted air conditioning systems Now the Aventa can be installed quickly and easily. The perfect enhance for older vehicle roofs. • Permanent sealing from the interior • For roof thicknesses of 25 –110 mm • Ideal if a skylight was previously installed

40

|

Air distribution: Underbunk air conditioners

AIR CONDITIONING

Comfort exactly as you choose it Suggestions for air distribution Eco solution Installed easily, quickly and at low cost.

Comfort solution Functional and convenient. For even air distribution in the interior.

Farbtabelle Gasversorgung

Wasserkomfort

Klimasysteme Heizsysteme Stromversorgung

Lufttechnik

Luxury solution Maximum living and sleeping comfort by means of the individually extendable cold air system. Rangiersysteme

Frischluft Kaltluft Abluft

With a few simple tips for correct cooling you can significantly improve the performance capability of your air conditioning system.

Find out how at www.truma.com.au

heating | cooling | controlling

| 41

Truma iNet Box Intelligent remote control of your Truma air conditioning systems Everything in the palm of your hand with the Truma iNet System! It allows you to control the Truma Combi and the Truma air conditioning systems remotely via App wherever you are. Turn on your air condition system easily and conveniently at the beach – and a perfectly cooled vehicle awaits you upon your return!

The heart of the Truma iNet System The Truma iNet Box is the central control unit which networks all Truma appliances in the vehicle.

The new Truma automatic climate control ensures the preferred comfort temperature regardless of the weather: it intelligently coordinates the heater and the air conditioning system and maintains a constant temperature in your vehicle. You only have a Truma air conditioning system in your vehicle? You do not need to renounce on the advantages of the Truma iNet System! The Truma air conditioning systems can be remotely controlled directly via the Truma App and the Truma iNet Box, even without the control panel CP plus. Simply have the Truma iNet Box installed – and benefit from maximum convenience! • Convenient operation of Truma appliances via smartphone or tablet • Complete control through status info and alarm • Simple installation and start-up • Automatic software updates via the Truma App • Operation of Truma air conditioning systems without CP plus directly via the iNet Box

Truma iNet Box

Part no. 36400-01

all dimensions in mm

More information: www.truma.com.au 

42

|

Contents, specifications and availability are subject to change serving the technical improvement.

Underbunk air conditioning system

Aventa comfort

Saphir comfort RC AU

The undisputed star of roof-mounted air conditioning systems The new rooftop air conditioning system Aventa comfort from Truma is a very high performer, quiet, light-weight and energy efficient.

Compact and light-weight underbunk air conditioning system The new Saphir comfort RC AU also offers an integrated heat pump function through its reversible cooling circuit. So it can be used to provide warmth before the real heating season begins.

Cooling and heating

• Powerful cooling with exceptionally high air output of 2400 W. • 1700 W heating capacity. • Maximum efficiency in heating and in cooling operation. • Especially light weight with only 33 kg • Sleep function for quieter interior cooling • Timer function. • For vehicles up to 7.5 m in internal length. • Truma iNet ready

Cooling and heating

• Extremely powerful cooling performance: 2400 W. • Heat pump mode warms using up to 1700 W. • Automatic heating and cooling. • The smallest in its class. • Practical timer function. • Light weight. • For vehicles up to 6 m in internal length. • Truma iNet ready

Technical data

Aventa comfort Part no. 44091-52/53

Technical data

Saphir comfort RC AU

Dimensions

L1008 x W660 x H248 mm

Dimensions

L628 x W400 x H290 mm

Weight

33 kg

Weight

23.5 kg

Cooling capacity

2.4 kW

Cooling / Heating capacity

2.4 kW / 1.7 kW

Voltage

240 volts

Voltage

240 volts

Recommended generator capacity

2.0 kW 4

Cycles

50 Hz

Circuit protection

10 A

Current consumption

4.2 A / 3.7 A

Recommended generator capacity 2.0 kW 1 Heating capacity

1.7 kW 2

Current consumption

4.2 A

3

) Heating is not possible at an outside temperature of less than 4°C.

4

2

Part no. 44035-03 3

) Includes 3 air outlets, nuts, 3 ducting clips & air intake vent. Please note: Ducting must be ordered separately.

) Will operate on most premium brand inverter type gernerators of 2000 watts and above

1

AIR CONDITIONING

Roof-mounted air conditioning system

) Will operate on most premium brand inverter type gernerators of 2000 watts and above

Contents, specifications and availability are subject to change serving the technical improvement.

More information: www.truma.com.au

heating | cooling | controlling

| 43

Aventa: Product overview Aventa roof-mounted air conditioning system 660

400

523

400

Air conditioning systems with infrared remote control for caravans and motor homes. Technical details 195 1008

248 670

46

523

400

660

400

Roof cutout (L x W): 380 x 350 mm or 400 x 400 mm For roof thicknesses of 25 – 50 mm (with roof thickness adapter up to 110 mm)

195 1008

Product

670

46

Aventa

248

Accessories

Part no.

Description

36400-01

Truma iNet Box Please see page 13 for technical data

36021-01

Truma CP plus Digital control panel, Truma iNet ready

Note: See page 13 for surface-mounted frame CP plus, cover CP plus, TIN distributer and cable variants 40091-19500

Sealing frame Aventa

40091-16800

Air filter kit Aventa (2x)

40091-16900

Roof thickness adapter 10 mm (1x) For adapting to roof thicknesses of more than 50 mm to a maximum of 110 mm (order appropriate quantity depending on thickness of roof)

Covering tape for Aventa air distributor self-adhesive, for compensating for roof unevenness. 2.36 m long, compensation height up to 5 mm

44

|

40091-31200

Covering tape, cream, 2.36 m

40091-31300

Covering tape, grey, 2.36 m

Saphir: Product overview Technical details

AIR CONDITIONING

Saphir underbunk air conditioners Saphir comfort RC

Accessories Saphir Product

Part no.

Description

36400-01

Truma iNet Box Please see page 13 for technical data

36021-01

Truma CP plus Digital control panel, Truma iNet ready

Note: See page 13 for surface-mounted frame CP plus, cover CP plus, TIN distributer and cable variants 40040-29200

Intake grille circulation air, rectang. air stream cross-section 500 cm²

40040-60100

Sound muffler For installation in cold air system for additional noise reduction in the living area

40090-64600

Fluff filter Saphir, blue

40090-58100

Saphir particle filter Suitable for all Saphir air conditioning systems

heating | cooling | controlling

| 45

Accessories Accessories for cold air distribution Product

Part no.

Description

40200-01

Duct KR 65, Ø 65 mm Cold air duct

40241-01

Clamp ÜS, grey, Ø 65 mm for attaching the cold air pipes, e.g. to the wall

40151-02

T-pipe LT, agate grey for air ducts Ø 65 or 72 mm

40181-01

End outlet nut EM, agate grey

40171-01

End outlet EN, agate grey with air throttle, suitable for T-pipe LT, end outlet nut EM and Ø 65 mm ducts

40171-07

End outlet EN-O, agate grey without air throttle, for lamella inset LA,

Swivelling air outlet SCW 2 Non-closable air outlet for connection to cold air duct KR 65

RL

46

|

ANH

39971-01

Swivelling air outlet SCW 2, black

40290-02

Connector piece ANH, black required for connecting the cold air duct KR 65 to the rectangular air outlet

40280-01

Rectangular air outlet, black (RL)

40151-01

T-pipe TS, agate grey for air ducts Ø 65 or 72 mm

40191-01

Y-pipe, agate grey for air ducts Ø 65 or 72 mm

39010-76400

Elbow BG, black for air ducts Ø 65 or 72 mm

AIR CONDITIONING

Space for your notes

heating | cooling | controlling

| 47

AU

Australia phone: +61 (0)7 5507 6000 fax: +61 (0)7 5507 6001 email: [email protected]

2017/01

Dometic Australia, Queensland 1 1 John Duncan Court Varsity Lakes QLD 4227

Truma Gerätetechnik GmbH & Co. KG Wernher-von-Braun-Straße 12 85640 Putzbrunn Germany

www.truma.com