THERMAL STRESSES '99 Third International Congress on Thermal Stresses
Edited by J.J. Skrzypek and R.B. Hetnarski
Cracow University of Technology Cracow, Poland June 13-17,1999
THERMAL STRESSES '99
Contents
General Lectures J.R. Barber, Thermoelasticity and contact R.B. Hetnarski, J. Ignaczak, Generalized thermoelasticity
11
D. lesan, Thermal stresses in heterogeneous elastic cylinders with microstructures
19
G.A. Maugin, A. Berezovski, Material formulation of finite-strain thermoelasticity and applications
25
N. Noda, Thermal stresses in functionally graded materials
33
Y.I. Nyashin, V.I. Kiryukhin, F. Ziegler, Thermal stress and strain: modeling and control
39
T.R. Tauchert, F. Ashida, Application of the potential function method in piezothermoelasticity: solutions for composite circular plates
Coupled Thermomechanical Fields
43
51_
J. Awrejcewicz, V.A. Krysko, Coupled thermomechanical problems in the shell theory
53
X. Ge, T.R. Tauchert, Maysel's method fora circular plate under thermal/piezoelectric loading
57
R.B. Hetnarski, L.G. Hector, P. Hosseini Tehrani, M.R. Eslami, Thermal stresses due to a laser pulse train: Coupled solution
61
J. Ignaczak, Spatial decay estimate for transient thermoelastic process in a composite semi-space
65
M. Ishihara, N. Noda, Effect of transverse shear on behavior of a rectangular laminate composed of cross-ply laminate and piezoelectric plate
69
M. Krommer, H. Irschik, An analogy between thermal and piezoelectric stresses taking into account the direct piezoelectric and the pyroelectric effect
73
Y. Ootao, Y. Tanigawa, Three-dimensional transient piezothermoelasticity and control of thermal displacement in functionally graded rectangular plate associated with a piezoelectric plate
77
I. Paczelt, B. Pere, Investigation of contact wearing problems with hp-version of the Finite Element Method
81
Y. Povstenko, Thermal stresses caused by axisymmetric spreading of hot liquid on the solid surface
85
L. Restuccia, B.T. Maruszewski, Vortex lattice waves in a high-Tc superconductor
89
D. Wang, J. Qu, R. Qian, Y. Dou, Transient FEM for axisymmetric coupled thermoelasticity
93
Thermoelasticity
97
F. Bofill, R. Quintanilla, On existence and uniqueness of unbounded solutions in incremental thermoelasticity
99
S. Chirita, Spatial behaviour in thermoelasticity
103
K.L. Chowdhury, Axisymmetric thermal stresses in a transversely isotropic semi-space
107
THERMAL STRESSES '99
Contents
T. Furukawa, H. Nakanishi, H. Uneyama, State space approach to generalized thermoelasticity of layered medium subjected to partial heating
111
A. Gatka, J.J. Telega, R. Wojnar, Effective moduli of thermoelastic composites with temperature-dependent coefficients
115
H.J. Holl, H. Irschik, U. Pichler, J. Gerstmayr, Maysel's formula in non-linear structural mechanics
119
H.S. Kit, B.Ye. Monastyrsky, Thermoelastic interaction of two semi-infinite bodies under conditions of local contact absence
123
M. Matczyhski, R. Martynyak, A. Kryshtafovych, Contact problem of a crack filled with heat-conducting gas
127
R.M. Shvets, A.A. Kryshtafovych, R.M. Martynyak, Method of singular integrodifferential equations in the problems on imperfect thermoelastic contact of anisotropic bodies
131
Y. Tanigawa, S.-P. Jeon, Axisymmetrical thermoelastic problems for nonhomogeneous medium with a penny-shaped crack
135
E. Tsuchida, Y. Arai, H. Kotaka, Y. Hagiwara, Thermal stresses in a semi-infinite plate having an elliptic inclusion and a surface layer
139
V.M. Vihak, M.Y. Yuzvyak, Three integro-differential compatibility equations in terms of strains and a complete system of thermoelasticity equations in terms of stresses
143
M. Wozniak, V.J. Pauk, 2D-models of a thermoelastic layer with a microperiodically folded boundary
147
Thermoplasticity
151
S. Alexandrov, O. Richmond, Estimation of thermomechanical fields near maximum shear stress tool/workpiece in metalworking processes
153
A.K. Belyaev, G. Finstermann, H.J. Holl, H. Irschik, K. Zeman, Temperature field and thermal stresses in rotating work rolls during hot rolling
157
R. Dfbski, K. Szuwalski, Decohesive carrying capacity of circular plates under thermal loadings
161
C. Goth, R. Billardon, N. Schmitt, D. Visconte, Numerical simulations of the foundry process: sensitivity of residual stresses to the material constitutive equations
165
S. Grostabussiat, L. Taleb, J.F. Jullien, F. Waeckel, Transformation induced plasticity fora 16MND5 steel
169
G.L. Kolmogorov, T.E. Melnikova, N.A. Kurapova, L.V. Oleksiuk, Thermal stresses and regimes of the plastic deformation of metals by the drawing
173
G.L. Kolmogorov, M.A. Oshivalov, T.A. Ulrih, Contact spot welding stresses
177
Z.L. Kowalewski, L. Dietrich, G. Socha, An influence of the annealing and ageing processes on the mechanical properties of engineering alloys under complex stress state
181
L-E. Lindgren, A welding simulation revisited
185
E.A. Pieczyska, S.P. Gadaj, W.K. Nowacki, Thermoelastic and thermoplastic effects in austenitic steel after rolling
189
THERMAL STRESSES '99
Contents
Thermoviscoplasticity
193
H. Altenbach, K. Naumenko, Stress analysis of thin plates at elevated temperatures
195
K. Hedrih, Thermorheological hereditary pendulum
199
K. Ikegami, H. Kawada, Internal stress of epoxy resin induced by thermal history
203
M. Mihailescu-Suliciu, I. Suliciu, Energy estimates for rate-type thermo-viscoelasticity with non convex equilibrium free energy
207
P.F. Nedorezov, N.M. Sirotkina, N.S. Sirotkina, Definition of cylindrical polymer panel temperature field using numerical-analytical method
211
H.M. Nykyforchyn, O.Z. Student, B.P. Loniuk, Thermocycling in hydrogen as a specific type of thermomechanical fatigue of structural steels
215
D.W.A. Rees, High temperature cyclic deformation processes in alloy 800H
219
Y.N. Shevchenko, Transformation of thermoviscoelastoplastic stress-deformed state of some constructions elements depending on heating regime
223
Thermal Fatigue and Ratchetting
227
V.G. Barylo, Procedure for thermal fatigue testing of materials over a wide range of variation in the loading system rigidity
229
L. Gandossi, N. Taylor, R. Hurst, Crack growth behaviour in 316L stainless steel components under thermal fatigue loading
233
V. Kravchuk, E.A. Zadvorny, Investigation of thermal fatigue crack propagation kinetics in heat-resistant materials under conditions of unsteady heat exchange using the methods of experimental and numerical simulation
237
E. Nicouleau-Bourles, N. El-Mayas, D. Massinon, G. Cailletaud, Thermomechanical fatigue of aluminium alloys: experimental study and numerical simulation
241
P.O. Santacreu, H. Sassoulas, F. Moser, O. Cleizergues, G. Lovato, Study of the thermal fatigue of stainless steels and its application to the life prediction of automotive exhaust line components
245
B. Skoczen, Z. Tokarz, Low-cycle fatigue induced buckling of cryogenic pipelines in the light of ductile damage mechanics
249
S. Taheri, L. Taleb, Step by step analysis and simplified methods for the ratchetting forecasts
253
Z. Wu, P.G. Glockner, Numerical simulation of thermo-mechanical interaction in plastics subjected to cyclic loads
257
Damage and Fracture Mechanics
261
D.I. Bardzokas, S.Kh. Gevorgyan, S.M. Mkhitaryan, On one class of thermoelasticity boundary problems for an elastic plane with collinear system of cracks A. Ganczarski, Effect of brittle damage on thermal expansion tensor A. Ganczarski, J. Skrzypek, Thermo-mechanical damage of piston
263 267 271
THERMAL STRESSES '99
Contents
T. Goshima, S. Ishihara, N. Yamauchi, T. Koizumi, Mutual interference of multiple interface cracks in a surface layered material due to rolling contact with heat input
275
N. Hasebe, K. Yosikawa, Debonding propagation on the square rigid Inclusion under uniform heat flux
279
S. Ishihara, T. Goshima, K. Nomura, Thermal-expansion induced microcracking of cermets and cemented carbides
283
A. Kaczyhski, S.J. Matysiak, Three-dimensional thermoelastic problems of interface cracks and rigid inclusions in bimaterial layered composites
287
R.M. Kushnir, Thermal stresses in piecewise-homogeneous shell structures with cracks
291
J.S. Pawloski, Thermal plastic zone size in a long cylinder with an external circumferential crack A. Saimoto, Y. Imai, F. Motomura, Crack growth behavior in thermal stress cleaving of
295
rectangular plates
299
Y. Shibuya, Effect of fiber breakage on creep behavior of metal matrix composites
303
J. Skrzypek, H. Kuna-Ciskat, Modeling of damage/fracture/heat transfer interaction in elastic-brittle structures
307
Thermal Stresses in Structural Elements I.F. Astakhova, I.S. Molchadski, The stressed-strained state of the constructions under conditions of real fire
311 313
S. Baleix, Y. Le Maoult, S. Frenois, Y. Marcel, P. Lours, G. Bernhart, Simulation of service life cycle induced thermomechanical stresses in a superplastic forming tool
317
M. Bielecki, J. Badur, Self-heating of the vibrating elements of steam power plants
321
R. Cukic, T. Maneski, Thermomechanical stress analysis of the hot-water boiler by FEM
325
P. Cupiat, T. Kurtyka, Finite element analysis of the thermomechanical behaviour of a silicon detector module M. Daimaruya, H. Kobayashi, T. Oota, K. Fuad, Thermal stresses and distortions in car
329
brake drum with temperature dependence of material properties
333
J. Grum, Residual stresses after induction hardening and grinding
337
J. Grum, R. Sturm, Residual stresses after laser surface remelting S.K. Gupta, S. Sharma, Thermo elastic-plastic transition in non-homogeneous thickwalled rotating cylinders
341
Tu Hsiang-te (Du Xiangde), Thermal stress from Westergaard to Tesabik in concrete pavement
345 349
B.S. Karpinos, V.G. Barylo, N.G. Solovyova, Modeling of thermal stressed states of power equipment elements W. Kurnik, Stability of a thermoactive rotating shaft in non-uniform field of temperature T.L. Liu, J. Vamvakitis, Finite element analysis of transient heat transfer and thermal stresses in EGR (Exhaust Gas Recirculation) valve A. Moiseenko, A. Dolotov, Investigation of stressed - deformed bodies state caused by heat - treated fit, contacting on discontinuous cylindrical surface
353 357 361 365
THERMAL STRESSES '99
Contents
S. Peraire, Transient quasi-static thermal stresses in a plate subject to transverse 2d gaussian heating and lateral cooling
369
B. Protsiuk, V. Syniuta, Thermoelastic state of a multilayer cylinder due to a heat flow
371
D.D. Ruzic, Lj.S. Markovic, Loss of stability of a cylindrical shell due to the heating of its ends D. Trajkovski, R. Cukic, The problem of deformation of a thermally loaded thin shell of
375
elliptical cross-section W. Uddin, L. Tang, Effects of thermal gradient on asphalt pavement performance
379 383
B. Wiechers, M. Rodig, Thermal stresses in plasma facing components for the international thermonuclear experimental reactor (ITER) K. Wierzcholski, The analytical simulations of thermoelasticity deformations for journal bearing gap
391
Z. Zhong, Ch. Mei, Control of large thermal deflection of surface panels for high speed flight vehicles using shape memory alloy
395
Thermal Stresses in Composites
387
399
Z.F. Baczyhski, Dynamic thermoelastic problem in microperiodic layered semi-space
401
A.R. Boccaccini, R.I. Todd, R. Sinclair, R.B. Yallee, R.J. Young, H. Kern, On the toughening effect of residual thermal stresses in glass matrix composites reinforced with AI2O3-platelets
405
V.A. Borisenko, L.I. Gracheva, A.N. Mishkin, A.V. Bogomolov, The influence of thermal stresses on strength of carbon materials at high temperatures
409
P.W. Chung, K.K. Tamma, R.R. Namburu, A finite element thermo-viscoelastic creep approach for composite structures with dissipation
413
L. Ciupihski, G. Krzesiriski, K.J. Kurzydlowski, FEM modeling of residual thermal stresses in cmm composites and their influence on macroscopic properties in a tensile test
417
A. Gachkevich, R. Terletskii, T. Kournyts'kyi, Z. Kasperski, Heat and mass transfer and thermal stresses in semitransparent multicomponent solid subjected to thermal infrared radiation .
421
M. Kaminski, Probabilistic thermomechanical homogenized properties of fiber
425
composites G. Kerch, Effect of residual thermal stresses on mechanical properties of polymer blends
429
K. Linnenbrock, F. Ferber, K.P. Herrmann, Fracture mechanical analysis of automatically monitored three-dimensional crack growth in thermally loaded material models of two-phase compounds J. Meenen, H. Altenbach, An extension of Pagano's analytical solution for layered structures to thermal loadings and arbitrary boundary conditions
433 437
Y. Ozawa, K. Sugiura, H. Suzuki, Effect of temperature condition on tensile strength of CFRP cross-ply laminates in space environment
441
W. Rakowski, T. Habdank-Wojewodzki, S. Zimowski, M. Kot, Thermal stress and resistivity of PEI sensor bearing coatings
445
THERMAL STRESSES '99
Contents
Z. Trojanova, P. Lukac, J. Kiehn, K.U. Kainer, B.L. Mordike, Relaxation of thermal stresses induced in Mg alloys base composites due to thermal loading
449
K.L. Verma, Propagation direction in layered orthotropic elastic composites in generalized thermoelasticity
453
V.M. Vihak, B.M. Kalyniak, Reduction of one-dimensional elasticity and thermoelasticity problems in inhomogeneous and thermal sensitive solids to the solution of integral equation of Volterra type
457
Cz. Wozniak, E. Wierzbicki, M. Wozniak, A macromechanical model for thermoelastodynamics of solids with periodic microstructure
461
Inverse and Optimization Problems
465
L. Bazylevych, R. Kushnir, M. Nykolyshyn, Inverse problems of reproducing residual welding stresses in shells of revolution
467
B. Bochenek, Bimodal optimal design against instability and postbuckling behaviour of thermally loaded columns
471
A. Gachkevich, N. Gachkevich, Z. Kasperski, Stress-optimal regimes of heating by convective method and electromagnetic radiation with infrared frequency range shells of revolution
475
R. Kawamura, S. Matsumoto, Y. Tanigawa, Multipurpose optimization problem on material composition for thermal stress relaxation type of functionally graded circular plate using genetic algorithm
479
J. Kruzelecki, P. Trzeciak, M. Zyczkowski, Optimal design of rotationally symmetric shells for buckling under thermal loadings
483
S.A. Lukasiewicz, R. Babaei, On inverse problem in thermoelasticity
487
Z. Mroz, K. Dems, Sensitivity analysis and design of thermo-mechanical interfaces Yu.M. Pochtman, M.M. Fridman, Optimization of the planestressed perforated plates, exploited in conditions of high temperatures, taking into account of corrosion and damage of material
491
495
W. Schaller, D. Munz, Y.Y. Yang, Stress optimization in functionally graded materials using the swarm search algorithm
499
J. Taler, P. Duda, Identification of the transient temperature and thermal stress distribution
503
J. Taler, M. Zborowski, The method of determining the optimal temperature changes during heating of thick-walled components
507
Y. Zozulyak, Variational approach to modelling and optimization of a thermo-stressed state of thin-walled elements of construction
511
Thermal Shock
515
L. Bruno, S. Peraire, | J. Zazula |, Design studies of the LHC beam dump
517
T. Fujimoto, N. Noda, The influence of compositional profiles of the functionally graded plate on the crack paths caused by thermal shock
519
THERMAL STRESSES '99
Contents
T. Hata, Thermal stress-focusing effect in a nonuniformly heated cylindrical rod
523
R. Heuer, A. Raue, F. Ziegler, Thermal shock loading of composite beams with interlayer slip
527
R.L. Sharma, J.N. Sharma, Response of thermoelastic solid thick plate subjected to lateral loadings
531
Y. Yihui, Ch. Yuze, D. Lihui, Closed form solutions to a spherical cavity shocked by combined heat and pressure
535
X. Zhang, G. Lu, M.D. Stuart, E. Siores, Fracture evaluation of a ceramic hollow cylinder due to asymmetrical contact heat conduction
539
Thermoelastic Waves
543
V.A. Baskakov, N.P. Bestuzheva, N.A. Konchakova, J.B. Nazaryeva, Some properties of dynamic equations of thermoelastic medium with microstructure
545
X.F. Ding, T. Furukawa, H. Nakanishi, Stress-focusing effect in an infinitely long cylinder with finite thermal wave speed
549
I. Dobovsek, Importance of a wave number selection in marginal stability analysis of temperature dependent viscoplastic flow
553
M.R. Eslami, P. Hosseini Tehrani, Propagation of thermoelastic waves in coated vessels
557
Yu.A. Rossikhin, M.V. Shitikova, Nonstationary Rayleigh waves on the surfaces of some thermoelastic bodies of revolution J.N. Sharma, Propagation of thermoelastic waves in homogeneous isotropic plates
561 565
N. Sumi, Numerical solution of thermal and mechanical waves in functionally graded materials A. Tylikowski, R.B. Hetnarski, Passive and active damping of thermally induced vibrations
573
K.L. Verma, N. Hasebe, R. Sethuraman, Dynamic distribution of displacements and thermal stresses in multilayered media in generalized thermoelasticity
577
Transient Thermal Stresses F. Ashida, Transient thermal stresses in a circular cylinder in asymmetric contact with heated rigid bodies
569
581 583
S. Chirita, M. Ciarletta, Time-weighted surface power function method in linear thermoelasticity Y. Matsunaga, Transient thermal stresses in a superelastic SMA plate
587 591
Y. Obata, K. Kanayama, T. Ohji, N. Noda, Two-dimensional unsteady thermal stresses in partially heated circular cylinder made of functionally graded material Z.S. Olesiak, Y.A. Pyryev, On dynamical thermoelastic contact of two solids with heat of friction generation and wear
599
K. Watanabe, Transient thermal stresses in a cylindrically anisotropic elastic solid
603
595
THERMAL STRESSES '99
Contents
Instabilities and Localization
607
H. Eslami, M. Mizuno, M.R. Eslami, Thermal postbuckling of composite beams with shear deformation effect using a 20 DOF Finite Element Method
609
L.E. Popov, S.N. Kolupaeva, N.A. Vihor, Dislocation subsystem stability in FCC materials under intensive loading
613
P. Zagrodzki, K.B. Lam, E. Al Bahkali, J.R. Barber, Simulation of a sliding system with frictionally excited thermoelastic instability
617
Heat Conduction
621
R.K. Bera, Cooling of a composite rectangular plate with general boundary conditions
623
S. De Cicco, L. Nappa, Phragmen-Lindelof results in generalized heat conduction
627
I. Grajciar, M. Zmindak, M. Sipos, The temperature distribution around the automobile tire in service M. Kurashige, M. Mishima, K. Imai, Simulated effective thermal conductivity of sintered,
631
randomly packed spheres and its concentrated branch model
635
J.C.G. Lanzinha, Thermal conductivity of hardened concrete C 25/30
639
M.T. Santana, Thermal analysis of RCC dams construction
643
Experimental Methods
647
R. Burbelo, M. Zhabitenko, Thermoelastic effect: the role of stressed state
649
I.K. El-beshtawy, L.J. Jankowski, Experimental investigation of thermal localized load effects on sandwich construction with flexible core using laser's techniques
653
I.K. El-beshtawy, P.A. Wrzecioniarz, Numerical analysis of thermal localized load effects on sandwich construction with flexible core using finite element method
657
S.P. Gadaj, P. Guelin, W.K. Nowacki, Thermomechanical coupling during cyclic deformation of polyamid material
661
B. Glisic, N. Simon, Monitoring of concrete at very early age using stiff SOFO sensor
665
K.L. Muratikov, A.L. Glazov, D.N. Rose, J.E. Dumar, Photothermal and photoacoustic measurement and imaging of residual stresses in solids A.S. Nielsen, J.S. Thomsen, R. Pyrz, Residual strains in polymer composites: in-situ
669
investigations using Raman spectroscopy
673
I. Roman, S. Kojman, Embedded fiber optic for advanced evaluation of thermal stresses
677
M. Sikori, Bimomental experimental thermoelasticity
681
S.J. Skrzypek, A. Cias, T. Pieczonka, TiN coatings on high speed steel and their residual stresses
685
Author Index
689