THE PARQUET WORLD AT YOUR FEET
PREPARATION BONDING FINISHING
Preparation DL EGALINE PRIMER Is used as a bonding primer for DL Egaline in case of layer on layer floor levelling application or as prior primer and bonding primer on non-absorbing and smooth surfaces. DL Egaline Primer reduces the porosity, protects cement based adhesives and levelling-mortars from too rapid dehydration and
Article number
prevents formation of cracks caused by shrinkage. Extends the open time of adhesives and improves the adhesion of levelling compounds and adhesives. The primer has a light blue control colour. After the film-formation the primer becomes more transparent, whereupon further work can start.
Packing
2000025D000002
#/pallet 120
Jar 5 l
DL EGALINE Dry, ready-to-use, fast-levelling mortar designed for floors. By the simple addition of water a self-levelling mortar for indoor use is obtained. DL Egaline contains very fine graded silica sand and allows to place very thin layers and to obtain a smooth surface. Unevenness from 0,5 mm to 10 mm can be smoothened in one single layer. DL Egaline offers an ideal substrate for tile work, lamination, parquet, broadloom, cork, vinyl, linoleum... Article number 2000025D000001
× × × ×
Packing
#/pallet 50
Bag 20 kg
METHOD OF USE | Non-absorbent, smooth, dense substrates
like ceramic floor coverings, smooth concrete, etc. must be pre-treated with undiluted DL Egaline Primer with a soft paint roller or brush. DL Egaline is made up with ± 25% water (± 5 l of water per bag of 20 kg), depending on the desired consistency. Slowly and evenly add the dry levelling mortar quantity to the water and blend with a slowly rotating mixer the contents vigorously for 2 minutes. Let the levelling mortar stand undisturbed for 5 minutes and stir the mixture vigorously again. Poor the DL Egaline in strips along the floor. A light smoothing out with
Excellent self-deliquescence Fast hardening: set to light foot traffic after ± 3 h and can be covered after ± 24 h Excellent adhesion High resistance after curing
a hand puller, an equalizing float, or a pin roller may be desirable. DL Egaline is applied in 1 or 2 layers. In case a second layer is necessary, apply it as soon as the first one has hardened. Before applying the second layer, the first layer must first be primed with undiluted DL Egaline Primer. The second layer can be applied after film formation (± 1 hour) of the primer. A minimum layer thickness of 3 mm screed is required for applications under parquet floorings. After full curing the DL parquet adhesives can be applied for all types of parquet floors and other wooden flooring.
PARQUET PRIMER Primer in order to obtain an ideal adherence of the PU and MS Parquet adhesives. Also reinforces floor surfaces on a concrete base. Can be used on porous substrates and tiled floors. The primer reacts with the humidity. Article number
2
1600011N000353
Packing Jar 5 l
× × ×
Easy to use Fast drying: ± 30 minutes Highly improved adherence
#/pallet 108
PARQUET PRIMER WB Solvent-free primer based on acrylates in order to obtain an ideal adherence of the PU and MS Parquet adhesive. Also reinforces floor surfaces on a concrete base. Can be used on porous substrates and tiled floors.
Article number
Packing
× × × ×
Easy to use Drying time: 2-24 h (depending on the conditions) Highly improved adherence Solvent-free: it doesn’t have a smell
#/pallet
1600012N000353
Jar 5 l
120
1600012N000253*
Jar 25 l
26
*on demand
METHOD OF USE | Apply the primer in one layer with a roll or brush. The primer must be completely dry before you apply the parquet adhesive.
Dry time depends on the circumstances. Parquet Primer WB cures by evaporation of water. Tools can be cleaned with water.
Bonding PARACOL PARQUET 2C PU Very strong, high quality and universal 2 component parquet adhesive, based on PU. For gluing all kind of parquet (wooden boards, mosaic parquet). Suitable for use on porous and Article number 0600013N000108
Packing Bucket 9 kg + Can 1 kg
METHOD OF USE | The parquet adhesive must be applied on an
even, dry, clean and smooth substrate, which is free from irregularities, cracks and loose parts. Irregularities, such as adhesive remains, must be removed mechanically. Surfaces that are not flat must be evened. Smooth surfaces like anhydrite should be roughened in order to increase the contact surface. A preliminary adhesion test on each substrate is recommended. Mix both components into a homogeneous mass (9/1). Be careful: if there
non-porous surfaces. This adhesive is solvent- and water-free, minimizing the risk of deforming the wood flooring.
#/pallet 55
is not enough of component B (hardener) the adhesive will not vulcanize completely. The correct proportions must be respected. Apply the adhesive by means of a suitable notched trowel (5 mm) to the surface. The open time of the adhesive is about 50-60 minutes. Slide the wood flooring onto the adhesive layer and tap into place with a rubber hammer. Loading the parquet with weights will improve the final bond strength. Wait at least 24 hours before sanding and finishing the parquet.
3
HYBRID PARQUET ADHESIVES The Parabond parquet adhesives are elastic hybrid polymer based adhesives. They are appropriate for bonding all types of parquet floors and other wooden flooring. They have an excellent primerless adhesion and adhere perfectly on both porous and non-porous surfaces. They are also suitable for difficult types of wood such as beech, maple and bamboo. Besides these general characteristics that apply for all Parabond parquet adhesives, every adhesive has its own specific characteristics and applications.
× × × × × × × ×
Ready to use, 1 component product Permanent elasticity As strong as PU adhesives Extremely high bonding capacity Free of solvents, water & isocyanates Improves the acoustics Very strong, but elastic adhesive bead Also for gluing of parquet on old ceramic tiles
PARABOND PARQUET 300 × × ×
Easy to apply, very easy to spread Can be walked on after 24 h Can be sanded after 24 h
Article number
Packing
#/pallet
0400034N000385*
Bucket 7 kg
55
0400034N000157
Bucket 15 kg
33
0400034N000483*
Bucket 2 x 7,5 kg
33
PARABOND PARQUET 440 × ×
Suitable for use with underfloor heating Easy to apply, very easy to spread
Article number
× ×
Packing
#/pallet
0400035N000385
Bucket 7 kg
55
0400035N000157
Bucket 15 kg
33
0400035N000483
Bucket 2 x 7,5 kg
33
PARABOND PARQUET 480 × × ×
Suitable for use with underfloor heating Can be used as moisture barrier Easy to apply, very easy to spread
Article number
4
Packing
× ×
Can be walked on after 24 h Can be sanded after 24 h
#/pallet
0400036N000385*
Bucket 7 kg
55
0400036N000157*
Bucket 15 kg
33
0400036N000483*
Bucket 2 x 7,5 kg
33
*on demand and per full pallet
Can be walked on after 24 h Can be sanded after 24 h
PARABOND PARQUET 540 × ×
Suitable for use with underfloor heating Ultra rapid strength build-up
Article number
× ×
Can be walked on after 8 h Can be sanded after 8 h
Packing
#/pallet
0400038N000385
Bucket 7 kg
55
0400038N000157
Bucket 15 kg
33
0400038N000483
Bucket 2 x 7,5 kg
33
PARABOND PARQUET 580 × × ×
× ×
Suitable for use with underfloor heating Can be used as moisture barrier Ultra rapid strength build-up
Article number
Packing
Can be walked on after 8 h Can be sanded after 8 h
#/pallet
0400039N000385*
Bucket 7 kg
55
0400039N000157*
Bucket 15 kg
33
0400039N000483*
Bucket 2 x 7,5 kg
33
*on demand and per full pallet
GLUE COMBS Article
Article number
Packing
GLUE COMB B11, triangular
2000003D000001
Set of 5 pieces
GLUE COMB 5601-B6, square 2,5 mm
2000003D000002
Set of 5 pieces
GLUE COMB FOR MOISTURE BARRIER
2000003D000003
Per piece
5
METHOD OF USE | The moisture content of the support should be
measured using a carbide meter or a digital hygrometer and be compared to the maximum value as specified by the flooring manufacturer (this is according to the NIT 218 of WTCB a maximum of 2,5% for cement floors and 0.6% for anhydrite. 5% for Parabond Parquet 480 and 580 as moisture barrier). The parquet should preferably be left in the original packaging in the relevant space to acclimatize for a few days. Check the humidity of the wood for installation and compare this with the value specified by the manufacturer. Installation is strongly discouraged below 7% or above 11% wood humidity. The surface must be fixed and rigid enough. Irregularities such as old adhesive residues should be removed mechanically. Extremely porous supports should be primed beforehand using parquet adhesive primer. The materials to be glued must be clean, dust and grease free. If necessary, degrease using Parasilico Cleaner, MEK, alcohol, or ethanol. Uneven floors should be levelled first using a levelling layer. Smooth base
(such as anhydrite) should preferably be sanded first, to improve the contact surface. It is advisable to do bonding tests. Our technical department could be consulted, if necessary. Apply the adhesive with a coarsely serrated glue scraper (5 mm). Take note that the adhesive exposure time is approximately 30 minutes (at 23°C and 50% R.H). It is therefore important not to apply too much adhesive in one stroke. Slide the parquet into the wet adhesive on the base and tap with a rubber hammer. The material can at this stage still be adjusted, just push it down well. If necessary, the parquet could be slightly loaded to ensure perfect spread of the adhesive. Any adhesive that may protrude along the edges can be removed using a stopping knife. Adhesive residue that has not yet dried, can be removed using Parasilico Cleaner, dried glue can only be removed mechanically. For the application of a moisture barrier with Parabond Parquet 480 or 580, use the special glue comb for moisture barrier. This glue comb makes sure a continuous layer of 1 mm is applied that protects against rising damp.
Finishing PARABOND MARINE PARQUET Elastic hybrid polymer based adhesive and joint sealer for bonding and sealing in marine industry, automotive and building industry. Ideal for floor joints in for example
Article number
6
Colour
bathrooms. Can be applied as effectively indoors as outdoors. Has a high resistance against ageing and weathering.
Packing
#/pallet
0400005N033463
Black
25 x 290 ml
1200
0400005N395463
Oak
25 x 290 ml
1200
PARABOND 600 High quality adhesive sealant based on MS polymers with a high initial adhesive strength. Perfect for bonding of
Article number
Colour
most materials on nearly all surfaces. Excellent adhesion. Ideal for fixing skirting boards, laths, plate material…
Packing
#/pallet
0400001N033463
Black
25 x 290 ml
1200
0400001N120463
Ral 8016 dark brown
25 x 290 ml
1200
0400001N401463
Ral 7004 grey
25 x 290 ml
1200
0400001N520463
Ral 1001 beige
25 x 290 ml
1200
0400001N716463
White
25 x 290 ml
1200
0400001N033432
Black
20 x 600 ml
720
0400001N716432
White
20 x 600 ml
720
PARACRYL PARQUET Elastic sealant based on acrylic dispersion specially developed for the sealing of joints in parquet and laminated flooring as well as joints between parquet and laminated flooring, skirting
Article number
Colour
boards and walls. Paracryl Parquet can be used on all porous surfaces such as wood, stone, concrete… Available in various wood colours and can be painted once cured.
Packing
#/pallet
0300017N01J466
Cream white
25 x 310 ml
1200
0300017N01X466
Beige
25 x 310 ml
1200
0300017N01Y466
Dark beige
25 x 310 ml
1200
0300017N01Z466
Grey beige
25 x 310 ml
1200
0300017N02A466
Light grey
25 x 310 ml
1200
0300017N315466
Middle grey
25 x 310 ml
1200
0300017N331466
Beech
25 x 310 ml
1200
0300017N360466
Medium oak
25 x 310 ml
1200
PARACOL MONTAGEKIT NEOPRENE Neoprene-based adhesive with great final strength. Fixing without nails or screws of most of construction material. Perfect to glue skirting boards, mouldings, window sills,
Article number 0700002N000466
Packing
sheeting, name plates, hooks, decorative plaster ornaments... Can be applied on uneven (up to 8 mm) materials, both horizontally and vertically.
#/pallet
25 x 310 ml
1200
PARACLEANEX Cleaning wipes soaked in a detergent solution of plant derived substances, removing deeply and quickly non-cured silicone, foam, glue… from the hands, tools and surfaces. One side is
Article number 1500021N000604
Packing 6 cans of 70 wipes (20 x 30 cm) per box
slightly abrasive the other side is soft. The napkin leaves a pleasant citrus fragrance on the hands and has a moisturizing and softening action.
#/pallet 396
7
Visit www.dl-chem.com for more information about these products and technical data sheets or contact your sales representative. PARQUET ADHESIVE WIZARD Preparation The surface is even? (unevenness up to 2 mm) YES
NO
1. DL EGALINE PRIMER 2. DL EGALINE
The surface is very dusty or porous? YES
PARQUET PRIMER
NO
Bonding Do you have underfloor heating? YES
NO
A moisture barrier is required? NO
A moisture barrier is required?
YES
Rapid strength build-up? NO
PARABOND PARQUET 300
YES
NO
Rapid strength build-up? YES
PARABOND PARABOND PARQUET PARQUET 480 580
NO
Rapid strength build-up? YES
PARABOND PARABOND PARQUET PARQUET 440 540
NO
YES
PARABOND PARABOND PARQUET PARQUET 480 580
Postal address and production: Roterijstraat 201-203 – B-8793 Waregem Head office and warehouse: Splenterbeekstraat 4 – B-8710 Wielsbeke T : +32 (0)56 62 70 51 F : +32 (0)56 60 95 68
[email protected] www.dl-chem.com