Supplier Day at DTNA Wednesday, February 4th, 2015
On November 23rd, 2010 Daimler made the decision to replace CATIA V5 with Siemens NX
Migration of Siemens NX CAD-System at all Business Units Completed for Mercedes-Benz Cars and Vans Daimler Trucks and Buses PLM2015 DTNA Supplier Day | Feb. 4th, 2015
End of 2015 End of 2016 Daimler Trucks North America
2
On November 23rd, 2010 Daimler made the decision to replace CATIA V5 with Siemens NX
Migration of Siemens NX CAD-System at all Business Units Completed for Mercedes-Benz Cars and Vans Daimler Trucks and Buses PLM2015 DTNA Supplier Day | Feb. 4th, 2015
End of 2015 End of 2016
Middle of 2015 End of 2015 Daimler Trucks North America
3
PLM2015… aka The NX Rollout Main Objective… …Replace CATIA V5 with Siemens NX by mid-2015 “The chosen solution aligns with the strategic direction and development of the current PDM system which will result in significantly improved integration of CAD and PDM at Daimler and DTNA enhancing collaboration between all product creation processes, from design through production planning.”
PLM2015 DTNA Supplier Day | Feb. 4th, 2015
Daimler Trucks North America
4
Essential topics within PLM2015 CAD
CAD Methods CAD Data Migration Interfaces (Production etc.) Use of JT CAD-/ PDM Linkage PDM Methods Supplier Integration Change processes Training Infrastructure
PLM2015 DTNA Supplier Day | Feb. 4th, 2015
PDM
Rollout
Daimler Trucks North America
5
DTNA Project Org Chart CAD / EDM Methodologies Mechanical Bryan Riddle Charles Kintzley Rob Minyard Amar Halake Milind Itagikar Electrical / Tubing Phil Noyes Pete Adam Michael Weedman EDM Reilly Shea Michael Savedge Interoperability / Data Exchange Nathan King
PLM2015 DTNA Supplier Day | Feb. 4th, 2015
Advisory Committee
Rollout Management Todd Liljenquist Robert Antos
DJ Phillips Thomas Ulm Bharat Addala
Jim Roland
Training & Support Training Jeff Laing Jorge Paez Jeff Dmytro
CAD / EDM IT /Operations Environment & Infrastructure Steve Jensen Oszkar Rohosy Interoperability & Data Exchange Scott Blackman Sridhar Srinivasan EDM BSA Senthil Swaminathan
OJT Support Anand Maringanti Atul Deshpande David Gladstone Mike Miller Vivek Vootkuru
Daimler Trucks North America
6
Formerly known as Illinois
PLM2015 in North America
PLM2015 DTNA Supplier Day | Feb. 4th, 2015
Daimler Trucks North America
7
DTNA HQ Portland OR 485 Users
Mexico 2 Locations Santiago & Saltillo 30 users
PLM2015 DTNA Supplier Day | Feb. 4th, 2015
DTNA Plants 3 Locations Mt. Holly, Gastonia, & Cleveland NC 12 Users
FCCC Gaffney SC 75 Users
Daimler Trucks North America
8
Project Timeline 2013 M
J
J
A
S
2015
2014 O
N
D
J
F
M
A
M
J
J
A S
O N
D
J
F
M
A
M
J
J
A S
O N
D
Support Transition
Infrastructure & Environment
RGS NX License Capacity Server In Place Installed
NX 9.0 Release
NX 10.0 Release
Training Pilot Training Begins
38N Focused Training Begins
Sustaining & CPD Groups Training
FCCC & Saltillo & Training Santiago Complete Plant Location Training Training
CATIA V5 Shutdown
PLM2015 DTNA Supplier Day | Feb. 4th, 2015
Daimler Trucks North America
Project Completion
9
NX Basic Training Progress 800
2013
2014
2015
700
600
Engineering Users
500
96% of Target 400
Target Actual Monthly
300
200
100
0
PLM2015 DTNA Supplier Day | Feb. 4th, 2015
Daimler Trucks North America
10
Scope of Training • • • • • • • • •
NX Basic Sheet Metal Tubing Drafting Electrical Complex Modeling FEM DMU Kinematics
PLM2015 DTNA Supplier Day | Feb. 4th, 2015
Daimler Trucks North America
11
Notable Accomplishments 474 Trained to Date Established updated and relevant NX CAD methodologies and
standards Work flow integration Electrical methodologies – ground up development NX 9.0 Update New NX License Server infrastructure New NX relevant supplier package
PLM2015 DTNA Supplier Day | Feb. 4th, 2015
Daimler Trucks North America
12
Challenges Balancing engineering project workload against rollout schedule Overcoming gaps in global methodologies Acceptance/participation in data migration plan Central project management
PLM2015 DTNA Supplier Day | Feb. 4th, 2015
Daimler Trucks North America
13
ROAD MAP ON CAD FORMATS
PLM2015 DTNA Supplier Day | Feb. 4th, 2015
Daimler Trucks North America
14
Road map on CAD formats
JT/TIFF STEP/DXF IGES What does this mean?
Drafting Board
PLM2015 DTNA Supplier Day | Feb. 4th, 2015
•
Consistent with Daimler Strategy.
•
STEP/DXF support reduced in the future
•
DTNA is getting out of the conversion business
Daimler Trucks North America
15
Interoperability CATIA Mastered All vaulted (checked in) CATIA data is automatically converted to JT
NX Mastered
All vaulted NX data is automatically converted to a simplified CATPart (a b-rep with no features)
PLM2015 DTNA Supplier Day | Feb. 4th, 2015
Daimler Trucks North America
16
JT Overview 1.) Tesselated Data
2.) Exact Geometry
Several levels of detail for performance visualization..
Mathematical surface description for exact measurements.
1
2 JT Content
3
Thickness Thickness
4
Thickness Thickness Thickness
Thickness
Thickness Thickness Thickness Thickness
Thickness
e. g., CATIA V5 master data
e. g., dimensions, tolerances…
3.) Product Structure / Part Attributes
4.) Product-- and Manufacturing Information
PLM2015 DTNA Supplier Day | Feb. 4th, 2015
- und Fertigungs - Metainformationen Thickness = PMI-Feld mit Produkt
Daimler Trucks North America
17
Format Support Outlook Office/Other
Native CATIA
Native NX
Special Swan Process
Derived Data (Brep)
NX Data
Native NX
Back Converted CATIA Service JT/TIFF
CATIA Data Office Data
DTNA Data Sources
STEP/DXF
IGS/DWG STEP/DXF
JT/TIFF Last Release V5
Native CATIA (V4 and V5)
Legacy CATIA
CGM/TIF/PDF (Released Drawings currently sent in Image Packages) Native Format (word, Excel, Powerpoint, etc.)
Office or PDF
Partner Receiving Data Options
JT/TIFF
new CAD usage Other Documents
2010
2011
PLM2015 DTNA Supplier Day | Feb. 4th, 2015
2012
2013
2014
2015
2016
2017
2018
Daimler Trucks North America
2019
18
JT Converters and Viewers
JT Converters • T-Systems COM/FOX
JT Viewers • Siemens PLM (JT2Go)
• Siemens
• Siemens
• Core
PLM Translator
PLM (Team Center)
Technologies
• Theorem
Solutions
• Elysium • CAD
extensions (Pro/E)
PLM2015 DTNA Supplier Day | Feb. 4th, 2015
Daimler Trucks North America
19
Benefits observed with using JT-data JT is ISO Standard – ISO 14306 (Dec 2012) JT is significantly reduced in data size OM651 Engine, Yellow = JT Candidate
Supplier is independent of CAD system Alignment with Daimler strategy
PLM2015 DTNA Supplier Day | Feb. 4th, 2015
Daimler Trucks North America
20
SWANWEB & NX SUPPLIER PACKAGE
PLM2015 DTNA Supplier Day | Feb. 4th, 2015
Daimler Trucks North America
21
SWANweb Q&A •
Secure transfer of Engineering Data
•
Only method approved by Daimler
•
#1 Issue is JAVA
Support, Guidelines, Standards, Tip sheets and Downloads Email:
[email protected] https://swan-dtna.i.daimler-trucksnorthamerica.com/dtna/supplier.html
Daimler Engineering Supplier Portal (aka Covisint) Limited DTNA participation https://daimler.portal.covisint.com/web/freightliner/home PLM2015 DTNA Supplier Day | Feb. 4th, 2015
Daimler Trucks North America
22
DTNA/Daimler NX Supplier Package NX Software from Siemens
DTNA/Daimler NX Supplier Package
Options: • General Bundles • Automotive Bundle (AS) • Daimler specific Supplier Bundles (DS)
• Daimler Specific Add-ons (Master Data tool, Title block Editor, etc.) • DTNA Specific Add-ons (Catalogs, Title block, etc.)
• NX Add-on modules (Adv. FEM)
PLM2015 DTNA Supplier Day | Feb. 4th, 2015
+
• Heidelberg CAx Quality Manager
Daimler Trucks North America
23
DTNA/Daimler NX Supplier Package
Start Center Daimler NX Add-ons Daimler/DTNA Libraries Startparts Daimler/DTNA Roles (Settings) Drawing Standards Drawing frames and title blocks HQM – Heidelberg Cax Quality Manager
NX 8.5 shown. NX 9.X has Ribbon Bar PLM2015 DTNA Supplier Day | Feb. 4th, 2015
Daimler Trucks North America
24
DTNA METHODS & TOOLS
PLM2015 DTNA Supplier Day | Feb. 4th, 2015
Daimler Trucks North America
25
Introductions and Demonstrations •
DTNA NX Methods
•
CAD-EDM Methods Introductions
•
Introduction to NX
•
Licensing Schema
•
Demos
•
Modeling
•
Sheet Metal
•
Drafting
•
Multi-CAD Assemblies
• •
Notes Motion Simulation, FEA, Electrical, Mechanical Routing, more are available.
PLM2015 DTNA Supplier Day | Feb. 4th, 2015
Daimler Trucks North America
26
Daimler-DTNA Products Startparts •
Daimler Global Startpart (3D)
•
DTNA Drawing Startpart (2D)
Reuse Library •
Symbols, Tables, and Notes
•
UDFs
Templates •
Drawing Formats
•
Title Block
•
Revision Header
DTNA Role •
Functions
•
Methods
PLM2015 DTNA Supplier Day | Feb. 4th, 2015
Daimler Trucks North America
27
Daimler Addons Assign Material Heidelberg Quality Manager (HQM) •
Suppliers are responsible for meeting DTNA Quality Standards.
•
All data is checked when loaded to Smaragd.
•
HQM and the Daimler-specific check configuration is included in the NX Supplier Package which can be requested from the DTNA Supplier Page.
•
To use HQM a license is required. This may be purchased from Heidelberger Druckmaschinen AG www.heidelberg.com/hqm
PLM2015 DTNA Supplier Day | Feb. 4th, 2015
Daimler Trucks North America
28
Documentation DTNA Supplier Page =>
https://swan-dtna.i.daimler-trucksnorthamerica.com/dtna/supplier.html
DTNA Methods Drawing Standards CAD Handbook
PLM2015 DTNA Supplier Day | Feb. 4th, 2015
Daimler Trucks North America
29
Outline 1)
Loading Multi-CAD data into NX
2)
Adjusting CAD Quality/Performance Settings
3)
Creating a Daimler “All-In-One Part”
4)
Designing in Assembly Context
5)
Lightweight Save Options
PLM2015 DTNA Supplier Day | Feb. 4th, 2015
Daimler Trucks North America
30
Loading Multi-CAD Data into NX File/ Open
File/ Import/ Part
Or…
• •
Preferences determined by Assembly Load Options. All part-based settings will be overwritten upon opening.
PLM2015 DTNA Supplier Day | Feb. 4th, 2015
• •
Preferences determined by Import Part dialog box. Imported part will adopt current part-based settings of the work part.
Daimler Trucks North America
31
Adjusting CAD Quality/Performance Settings Menu/ Preferences/…
Activating these settings will: • Increase 3D performance • Decrease 3D quality Activating these settings will: • Decrease 3D performance • Increase 3D quality • Improve geometry selection/usability
PLM2015 DTNA Supplier Day | Feb. 4th, 2015
Daimler Trucks North America
32
Creating a Daimler “All-In-One Part” Daimler AddOn/ Base/ All-In-One Part Add a temporary parent assembly, then create a new component and make it the Work Part.
Click on the “All-In-One Part” icon and select surrounding components to use as Reference Geometry.
PLM2015 DTNA Supplier Day | Feb. 4th, 2015
Daimler Trucks North America
33
Creating a Daimler “All-In-One Part”
The highlighted geometry is then copied to the Work Part.
Move all Reference Geometry in the “External_References” Feature Group
PLM2015 DTNA Supplier Day | Feb. 4th, 2015
Daimler Trucks North America
34
Designing in Assembly Context Using Reference Geometry
PLM2015 DTNA Supplier Day | Feb. 4th, 2015
Daimler Trucks North America
35
Designing in Assembly Context Using Reference Geometry
Create a Sketch Profile for the Sheetmetal Tab
PLM2015 DTNA Supplier Day | Feb. 4th, 2015
Daimler Trucks North America
36
Designing in Assembly Context Using Reference Geometry
Create Flanges, utilizing the “Match Face” option.
PLM2015 DTNA Supplier Day | Feb. 4th, 2015
Daimler Trucks North America
37
Designing in Assembly Context Using Reference Geometry
Switch to “Final Part” Reference Set
PLM2015 DTNA Supplier Day | Feb. 4th, 2015
Daimler Trucks North America
38
Lightweight Save Options Preparing the Assembly To break the assembly up into multiple segments, simply switch the Displayed Part in the Assembly Navigator before performing the export.
NX9.0 PLM2015 DTNA Supplier Day | Feb. 4th, 2015
Confidential
39
v14.1.1 Daimler Trucks North America
39
Lightweight Save Options Preparing the Assembly To filter out additional components in the assembly, suppress them by unchecking them in the Assembly Navigator. Hood is suppressed
NX9.0 PLM2015 DTNA Supplier Day | Feb. 4th, 2015
Confidential
40
v14.1.1 Daimler Trucks North America
40
Lightweight Save Options Monolithic Assembly Export to JT The options within the Export JT dialog box allow the user to define the structure and scope of the exported JT file.
1
In order to export JT Exact data, the assembly must be loaded in “Exact” mode prior to exporting.
2
NX9.0 PLM2015 DTNA Supplier Day | Feb. 4th, 2015
Confidential
Select File/ Export/ JT. Configure as shown and click OK. 41
v14.1.1 Daimler Trucks North America
41
Lightweight Save Options Loading the Exported JT file The JT file can be opened by simply selecting File/ Open and navigating to save location.
NX9.0 PLM2015 DTNA Supplier Day | Feb. 4th, 2015
Confidential
42
v14.1.1 Daimler Trucks North America
42
Transition from Catia V5 to Siemens NX • ConMet started the 38N project with DTNA entirely in Siemens NX. • Designers from both Catia and Creo backgrounds. • Users were trained by Applied CAx in one week sessions. • One group on site at ConMet • One group at Applied Cax (Portland)
ConMet uses PDM not specific to NX • ConMet uses Windchill PDM to manage data from multiple CAD systems. • Data check in/out, lock and release, revision management. • Not the same PDM used at DTNA (Smaragd)
NX integrated file translators • Receive CAD data from DTNA via Swan • Translate to NX format from .jt, .stp, .igs using Out‐of‐ the‐Box translators. • Catia translator add‐on supplied by CAx. – DTNA Specific Translator Available
• Upload to PDM.
Data flow between DTNA and Conmet • There is no direct connection between DTNA’s PDM (Smaragd) and ConMet’s PDM (Windchill). Receive CAD Data Via SWAN
Translate data (if needed)
Upload to ConMet PDM
Export data from Conmet PDM
Translate data (if needed)
Upload to DTNA Via SWAN
Use of DTNA CAD Guidelines • ConMet using CAD Geometry per DTNA NX Guidelines.
Use of Customer A-Surfaces A‐Surface Supplied by DTNA
Surfaces thickened by ConMet
B‐Side features added by ConMet
Use of User Defined Feature (UDF) Libraries • B‐Side features have been added to a standard features library. • Easy to add and update standard features. • Time savings and consistency in design.
Use of UDF Libraries • Each b‐side feature added from the library is independent within the model.
Use of DTNA Practices
• Can remove the thickened surface. • All b‐features remain in position
Summary • Designers with various backgrounds were trained in Siemens NX. • Works with third party PDM software. • Easy to setup and use UDF Libraries. • Current users prefer NX to other systems.
CAD/CAM/CAE/PLM
appliedcax.com
CAD/CAM/CAE/PLM
Applied CAx – Who We Are Siemens CAD/CAM/CAE/PLM Solution Partner Heavily focused on the technical side Support, Implementation, Training & Mentoring Customization, Optimization
Have our own shop: CNC, CMM We use this software ourselves
appliedcax.com
CAD/CAM/CAE/PLM
What is JT? JT is an industry focused, high‐performance, lightweight, flexible file format for capturing and repurposing 3D Product Definition (CAx) data that enables collaboration, validation and visualization throughout the extended enterprise.
appliedcax.com
CAD/CAM/CAE/PLM
History of JT JT was originally developed by Engineering Animation, Inc. and Hewlett Packard as the DirectModel toolkit. When EAI was purchased by UGS, JT became a part of UGS Corp.’s suite of products. Early in 2007 UGS announced the publication of the JT data format easing the adoption of JT as a master 3D format. Also in 2007, UGS was acquired by Siemens AG and became Siemens PLM Software. JT is the common interoperability format in use across all of Siemens PLM Software and has been adopted as the long term data archival format across all of Siemens. On 2009 September 18 the ISO stated officially that the JT specification has been accepted for publication as an ISO Publicly Available Specification (PAS). On 2012 December, JT has been officially published as ISO 14306:2012.
appliedcax.com
CAD/CAM/CAE/PLM
Benefits of JT over other formats NX
Lightweight Representation Accurate Geometry PMI Visualization ISO Standard Industrial Planning MultiCAD Supplier & Enterprise Collaboration
JT
appliedcax.com
CAD/CAM/CAE/PLM
Working with JT Import: JT works much like other CAD neutral formats. NX can open JT files directly File > Open > JT Files (*.jt)
3rd party translators for other CAD systems
Export: NX can export a JT file to STEP, Parasolid or IGES
appliedcax.com
NX > File Open
CAD/CAM/CAE/PLM
PMI: Importing JT into NX will preserve PMI within work view for ease of review and analysis.
appliedcax.com
CAD/CAM/CAE/PLM
JT2Go Desktop Free & available from Siemens allows users to view JT, CGM & TIF (www.jt2go.com) Basic Measurements Basic Cross‐Section on Facets PMI viewing with full data tree display 2D Viewing (CGM, TIF) Microsoft Office integration for JT Data Load monolithic JT files from URL Ultra Lightweight Precise display
JT2Go for iOS Pan, Zoom, Rotate 2D image capture using built in camera Gesture control available Model Property listing function Unique background for scene rendering
appliedcax.com
JT2Go
Free JT viewer
PMI, Section
Precise Measure
CAD/CAM/CAE/PLM
Windows 8.1 – 3D Viewer for JT 3D Viewer for JT is the most touch‐friendly way to view your JT format 3D files. Zoom, spin, and pan using your Surface Pro or other Windows 8 device.
appliedcax.com
CAD/CAM/CAE/PLM
Microsoft Office Integration JT2Go provides unique functionality for embedding JT viewing windows directly in MS Office documents. These JT Documents extend the value of JT and the power of 3D viewing to everyone using standard desktop applications. MS PowerPoint
MS Word MS Excel
Must have JT2Go installed to use the 3D functionality
appliedcax.com
64 | 23
Training and ReUse Patrick Barrett Director CAD/CAM/PLM Solutions
[email protected]
65 | 23
Who Am I? o o o
Mechanical Engineer Aerospace, automotive, plastics, semi‐ conductor, etc… Love CAD/CAM and Design Automation
66 | 23
3 account managers (Portland & Seattle) 1 marketing guru 20+ designers/engineers / FEA analysts working machine shop
67 | 23
Who would speak well of us…..
68 | 23
How do we ‘do this’? o o o
Trusted Siemens Partner Siemens 2013 N. American Partner of the Year NX CAD/CAE/CAM experts o
o o o o o
Customizations , Posts/Sim Kits development
In‐House Machine Tools (5‐axis, 4‐axis, CMM) Teamcenter architects Femap, NX Nastran, LS‐DYNA experts Clients all over the USA and Canada. Use NX, Pro/E, Solidworks in‐house o Cost of doing business
69 | 23
Get out your cell phones for a survey please •What CAD system do you use today?
o Text your response to 22333
70 | 23
71 | 23
NX Training Overview Many companies focus on the cost of acquiring new technology and forget to factor in the time to train their teams so they can actually use the technology correctly. But how do you know if the training added business value?
72 | 23
NX Training Overview Our training classes were built around real world activities and can be customized to match your industry focus including •Tooling and fixture methodologies •Molded part design •Castings •Free form surfaces, hydraulics Our instructors have deep experience with NX and know what works best
73 | 23
NX Training Overview Start with our NX Foundation: modeling, drafting, assemblies, sheet metal, plus+
74 | 23
NX Training Overview Things that make NX easy to learn:
•ROLES allows users to customize their NX environment and keep it familiar
•COMMAND FINDER •Fast search utility •Cross Platform command lookup •Catia, Pro/E, etc ROLES TAB
•CAST / Learn@Siemens Self paced, Web Based Great continuing learning
COMMAND FINDER
75 | 23
The Value of ReUse 1. Saves time • More products faster • The ‘Custom’ product is no longer such a daunting challenge 2. Reduces risk • We already know how to make this 3. Improves the process and product quality • Focus on impacting high value elements of your product 4. Reduces development costs • Flip the 80/20 rule Vehicle manufacturers have been doing it forever Why don’t we do it with designs?
76 | 23
The Value of ReUse
I KNOW I’ve modeled something just like this before. But when….
77 | 23
The Value of ReUse
NX has a number of tools that make re-using geometry, bodies, and parts easy and efficient. •Reuse Library •Synchronous Modeling
78 | 23
The Value of ReUse
NX REUSE LIBRARY: comes free with all NX CAD bundles 1. Pick a place for the ReUse Library to live 2. Best to make someone the ‘librarian’ 3. Agree on some meaningful categories •
Fasteners, plastic bosses, connector profiles, etc
4. Start building a smart library to speed up design
79 | 23
DEMO 1: ADDING A 2-D REUSABLE OBJECT
80 | 23
The Value of ReUse SYNCHRONOUS MODELING: Toolset that comes free with all NX CAD bundles • •
•
No other CAD system truly matches the S/T Feature capabilities Works with native NX .prt files AND imported geometry from other CAD systems Builds a parametric part history
81 | 23
DEMO 2: SYNCHRONOUS MODELING INTRODUCTION
82 | 23
NX Training Overview How Can Applied CAx Help DTNA Suppliers Transition to NX? 1. Authorized Partner for Purchase of NX DTNA Supplier Bundles 2. Provider of technical support 3. Deliver high value training for designers and engineers • CAD • CAE • CAM 4. Support you through the process
83 | 23
Thank you! Questions?
www.AppliedCax.com 800-746-8134
Portland OR
February 4, 2015
NX Licensing and Training Information about NX Licenses, NX Training and Services for Daimler Suppliers Christ Tayon Siemens PLM Software Supplier Program Manager
Smarter decisions, better products. Siemens PLM Software
Agenda
License Information •
Bundles for Daimler Supplier (DS) and Automotive Suppliers (AS)
•
Entry‐, Engineering‐, Advanced
•
License Combinations
•
License Upgrade
•
Siemens PLM Contact Info
NX Training •
Tracks to User Enablement
Workshops, Services, Service Packages
Western Star 5700XE Restricted. © Siemens AG 2015 All rights reserved. Page 85
Smarter decisions, better products. Siemens PLM Software
Siemens PLM Software Portfolio
Restricted. © Siemens AG 2015 All rights reserved. Page 86
Smarter decisions, better products. Siemens PLM Software
Siemens PLM Software Product Definition, Production Planning, Execution
Restricted. © Siemens AG 2015 All rights reserved. Page 87
Smarter decisions, better products. Siemens PLM Software
License Information Bundles for Daimler Suppliers (DS) and Automotive Suppliers (AS)
DS‐ Bundles (Daimler Supplier)
OEM
AS‐ Bundles
same Content
(Automotive Supplier)
Daimler
DS‐ Bundle
Supplier
– for active Daimler projects only (restricted use) –
Daimler
AS‐ Bundle
Supplier
– for independent use –
If two or more OEMs will be served by a NX‐ Supplier, the AS Bundle is the best choice. Restricted. © Siemens AG 2015 All rights reserved. Page 88
Smarter decisions, better products. Siemens PLM Software
NX for Daimler Supplier
Preconfigured best practices for everyday tasks and processes
•
• • •
Entry
Engineering
Advanced
DS5010 / AS5010
DS5050 / AS5050
DS5051 / AS5051
Replacement for 2D and 3D MidRange For low level work Part Supplier, Manufact. Supplier Solid Modeling incl. Synchronous Technology, Basic Free Form Modeling
• •
• •
Design‐ and Engineering House Component Supplier (PT, PE and Styling), Tooling Supplier Module Supplier Complex Free Form Models (Class A and Reverse Eng.), Adv. Assemblies
Restricted. © Siemens AG 2015 All rights reserved. Page 89
Additional Modules for • Weld Point Management • Wire Harness, Tubing, Piping • CAE ‐ Advanced Simulation for FEA, Pre, Post and Solver • General Packaging
Initiate new projects Create specifications Get cost estimates Create CAD models Create BOMs Author related documents Review, annotate, mark-up Check, approve, release Initiate workflow processes Conduct design reviews Release to manufacturing Smarter decisions, better products. Siemens PLM Software
Entry Bundles AS5010 & DS5010
NX (one floating) NX GATEWAY NX SOLID MODELING NX FEATURES & SYNCHRONOUS MODELING NX FREE-FORM MODELING NX RENDERING NX ASSEMBLES NX DRAFTING NX PMI NX Sheet Metal NX Quick Check NX Web Express NX XpresReview NX VDA 4955 checker NX HD3D Visual Reporting NX Check Mate NX OPEN GRIP RUNTIME NX KF Knowledge Fusion sharing NX Product Template Studio Consumer NX IGES Translator NX DXF/DWG NX STEP AP203/AP214 Translator
Teamcenter (one named user) Teamcenter Designer (for NX CAD Data Management) NX Embedded Client
NX RAPID PROTOTYPING NX 2D EXCHANGE NX CATIA V5 Interface (For Reference Geometry) NX Stress & Vibration Wizards
Smarter decisions, better products. Page 90
Siemens PLM Software
Engineering Bundles AS5050 & DS5050
NX (one floating) NX GATEWAY
NX FREEFORM SHAPE
NX SOLID MODELING
NX VISUALIZE SHAPE
NX FEATURES & SYNCHRONOUS MODELING
NX ANALYZE SHAPE
NX FREE-FORM MODELING NX RENDERING
NX ADVANCED ASSEMBLIES NX Molded Part Validation
NX ASSEMBLES NX DRAFTING NX PMI
NX Optimization Wizard NX Wave Control
NX Sheet Metal
NX Advanced Sheet Metal Design
NX Quick Check
NX One-Step Formability Analysis
NX Web Express NX XpresReview NX VDA 4955 checker NX HD3D Visual Reporting NX Check Mate NX OPEN GRIP RUNTIME NX KF Knowledge Fusion sharing NX Product Template Studio Consumer NX IGES Translator NX DXF/DWG NX STEP AP203/AP214 Translator
Teamcenter (one named user) Teamcenter Designer (for NX CAD Data Management) NX Embedded Client
NX RAPID PROTOTYPING NX 2D EXCHANGE NX CATIA V5 Interface (For Reference Geometry) NX Stress & Vibration Wizards
Smarter decisions, better products. Page 91
Siemens PLM Software
Advanced Engineering Bundles AS5051 & DS5051
NX (one floating) NX GATEWAY
NX FREEFORM SHAPE
NX Weld Assistant
NX SOLID MODELING
NX VISUALIZE SHAPE
NX Routing Piping & Tubing
NX FEATURES & SYNCHRONOUS MODELING
NX ANALYZE SHAPE
NX Routing Harness
NX ADVANCED ASSEMBLIES
NX Routing Cabling
NX Molded Part Validation
NX Body Design
NX Optimization Wizard
NX General Packaging
NX Wave Control
NX Advanced Simulation
NX FREE-FORM MODELING NX RENDERING NX ASSEMBLES NX DRAFTING NX PMI NX Sheet Metal
NX Advanced Sheet Metal Design
NX Quick Check
NX One-Step Formability Analysis
NX Web Express NX XpresReview NX VDA 4955 checker NX HD3D Visual Reporting NX Check Mate NX OPEN GRIP RUNTIME NX KF Knowledge Fusion sharing NX Product Template Studio Consumer NX IGES Translator NX DXF/DWG NX STEP AP203/AP214 Translator
Teamcenter (one named user) Teamcenter Designer (for NX CAD Data Management) NX Embedded Client
NX RAPID PROTOTYPING NX 2D EXCHANGE NX CATIA V5 Interface (For Reference Geometry) NX Stress & Vibration Wizards
Smarter decisions, better products. Page 92
Siemens PLM Software
License Information License combinations – Extension by NX Add‐on Licenses
Add‐on‐ Licenses extend your NX functionality in a flexible and economical way – to cover your • processes • special tasks • special knowledge • …
Example
Restricted. © Siemens AG 2015 All rights reserved. Page 93
Smarter decisions, better products. Siemens PLM Software
License Information License upgrade
AS / DS
DS GM* Nissan** Mach*** * ** ***
Sufficient for collaboration with Daimler
For collaboration with all OEM‘s – for unrestricted use
AS
GM Supplier Bundles Nissan Supplier Bundles Mach Bundles: NX Machinery Bundles
Restricted. © Siemens AG 2015 All rights reserved. Page 94
Advanced
Engineering
Entry
Possible Upgrade Directions Smarter decisions, better products. Siemens PLM Software
License Information Contact to Siemens PLM
www.Siemens.com/PLM/Daimler-Supplier
News Contact Form License Information Trainings Services Hotfix Download
Restricted. © Siemens AG 2015 All rights reserved. Page 95
Smarter decisions, better products. Siemens PLM Software
Agenda
License Information •
Bundles for Daimler Supplier (DS) and Automotive Suppliers (AS)
•
Entry‐, Engineering‐, Advanced
•
License Combinations
•
License Upgrade
•
Siemens PLM Contact Info
NX Training •
Tracks to User Enablement
Workshops, Services, Service Packages
Restricted. © Siemens AG 2015 All rights reserved. Page 96
Smarter decisions, better products. Siemens PLM Software
NX Training
Methods
Structure & Content
Roles
Content and learning tracks of Supplier Trainings by SPLM BiW Designer
Powertrain Designer
Basic NX Basic for Catia Users (5 days)
General Parts Designer
Advanced NX Freeform for CATIA Users (5 days)
NX Basic for 3D‐ Users (5 days)
NX Freeform
NX Basic for Beginners (10 days)
Assembly & Modeling (5 days)
(5 days)
Plastic Parts Designer
Tool Building
Project Engineer
Operating Resources
Special
Methods DMU&Concept (2 days)
PT/Cast Parts (3 days)
Mgmt.‐Traing. (1 day)
Synchr. Modlg. (1 days)
Plastic Parts
Tool Design
Suppl. Integrt.
(3 days)
(3 days)
(1 day)
PMI (3D‐ Master) (1 day)
Sheet Metal / BiW (3 days)
Mold Design
NX Kinematics
Sheet Metal
(3 days)
(2 days)
(2 days)
General Parts (3 days)
Mach. Fixture (5 days)
• Daimler certified Trainer
• Custom methods / Best practices
• Classroom Training
• Daimler training material
• Special Module Courses & Workshops
• Onsite Training / Mobile Training
• Training structure and methods • „Early Bird“ and „Fast Track“ Programs Page 97aligned with Daimler
• Web-based Training better products. Smarter decisions, Siemens PLM Software • On the Job Support / Remote Support
Agenda
License Information •
Bundles for Daimler Supplier (DS) and Automotive Suppliers (AS)
•
Entry‐, Engineering‐, Advanced
•
License Combinations
•
License Upgrade
•
Contact to Siemens PLM
NX Training •
Tracks to User Enablement
Workshops, Services, Service Packages
Restricted. © Siemens AG 2015 All rights reserved. Page 98
Smarter decisions, better products. Siemens PLM Software
Workshops, Services, Service‐ Packages Some examples to complete the offer to Daimler Suppliers
Services NX Installation, NX Supplier Package (Daimler readiness)
Workshops How to migrate CATIA Data into NX
Migration Support of CATIA Data to NX (defined Volume)
NX‐ Best Practices Changing CATIA Methods to NX
Teamcenter Rapid Start (Data‐Model, Workflows, Roles, Access Rights, Change, …)
Orientation NX Automation
NX productivity (Templates, Standards, Libraries, …)
Co‐ Existence of CATIA‐ and NX‐ Data in a managed Environment
Teamcenter Setup for CATIA & NX‐ Data Handling
Data Exchange with the OEM
IT Infrastructure: Analysis, Performance, concept, sizing
Jump Start onsite into NX
Teamcenter Installation Server
Teamcenter Installation Client In‐house Data management – an Introduction into Teamcenter Restricted. © Siemens AG 2015 All rights reserved. Page 99
Service‐ Packages
Quote for Project‐Support (arranged content)
Smarter decisions, better products. Siemens PLM Software
Spectrum of Supplier Roles Integration Level
Supplier Role Contract Staff Systems Integrators Risk & Revenue Partners System Concept & Design System Validation, Mfg Process
High
Medium
Sub-System Design Component Design, Mfg
Low Standard Parts Build to Specification
Restricted. © Siemens AG 2015 All rights reserved. Page 100
Smarter decisions, better products. Siemens PLM Software
Christ Tayon Siemens PLM Software Supplier Program Manager
Tel./ Mobile: 248 342 9326 eMail: christ
[email protected] Smarter decisions, better products.
www.Siemens.com/PLM
Siemens PLM Software
Thank You
Support:
[email protected] PLM2015 DTNA Supplier Day | Feb. 4th, 2015
Daimler Trucks North America
102