EINSTECHEN
ABSTECHEN
NUTFRÄSEN
NUTSTOSSEN
KOPIERFRÄSEN
REIBEN
NEU
NEW
Supermini® und Mini Programm mit Diamantschneiden
Supermini® and Mini range with diamond cutting edges
TECHNO LO G I EVO RSPRUN G I S T H O R N HO RN - EXCELLENCE I N TE C H N O L O G Y
GROOVING
PARTING OFF
GROOVE MILLING
BROACHING
PROFILE MILLING
REAMING
Supermini® und Mini Programm mit Diamantschneiden Diamantbestückte Werkzeuge, mit CVD-D- und PKD- Schneiden, ergänzen das Produktprogramm für die Bohrungsbearbeitung. Sie dienen zum Ausdrehen, Kopieren und Einstechen bei gesintertem Hartmetall, Keramik oder abrasiven Kunststoffen. Ebenso kommen sie bei Nichteisenwerkstoffen zum Einsatz, welche entweder durch ihren Siliziumgehalt hoch abrasiv wirken, oder zu Spanproblemen und Aufbauschneidenbildung neigen. Die hierfür speziell entwickelte Spangeometrie löst nahezu alle Prozessprobleme, welche durch unkontrollierte Wirrspäne entstehen können. Der Supermini® mit CVD-D- oder PKD-Schneide ist lagerhaltig ab Durchmesser 1,5 mm lieferbar und je nach Anwendungsspektrum in drei Geometrievarianten erhältlich. Die H0-Geometrie, mit einem Spanwinkel von 0 Grad, dient der Bearbeitung hartspröder Werkstoffe, wie Hartmetalle, vorgesinterte Keramikwerkstoffe, Graphit, sowie kurzspanendem Messing. Der Einsatzbereich der H5-Geometrie, mit 5 Grad Spanwinkel, sind abrasive und weiche Werkstoffe. Hierzu zählen Aluminiumlegierungen mit hohem Siliziumgehalt, faserverstärkte und andere Kunststoffe mit abrasiven Bestandteilen. Diamant als Schneidstoff kommt auch bei Edelund Buntmetallen ohne Spanprobleme wie Platin, Iridium, Gold, Tantal, Titan, sowie Sintermetallen wie Wolframkupfer, erfolgreich zum Einsatz. Die HF-Geometrie kommt bei langspanenden NE-Metallen, wie alle Aluminiumknetlegierungen, zum Einsatz. Dazu zählt auch Kupfer mit seinen Legierungen wie Bronze, bleifreies, bleiarmes und somit langspanendes Messing. Die Geometrie dient, wegen des kontrollierten Spanbruches, zur effektiven Verhinderung von Prozessproblemen durch Wirrspäne. Das mit CVD-D oder PKD bestückte Supermini- und Mini-Programm von HORN besticht durch seine Alleinstellungsmerkmale diesem Marktsegment der Diamantwerkzeuge; aktive Spangeometrien und der Innenkühlung direkt auf die Schneide.
Supermini® and Mini range with diamond cutting edges Our portfolio of products for boring now includes diamond-tipped tools with CVD-D and PCD cutting edges. These tools are used for boring, copying and grooving when working with sintered carbide, ceramics or abrasive plastics. They are also used for machining non-ferrous materials which are either highly abrasive due to their silicon content or have a tendency to exhibit chipping problems and form built-up edges. The chip geometry, which has been specially developed for this purpose, solves virtually all machining problems caused by uncontrolled formation of stringy swarf. The Supermini® with CVD-D or PCD cutting edges is available in diameters from 1.5 mm and in three different geometry versions, depending on the application. The H0 geometry with a chipping angle of 0 degrees is used to machine hard, brittle materials such as carbides, pre-sintered ceramic materials, graphite and short-chipping brass. The H5 geometry with a chipping angle of 5 degrees is used to machine abrasive and soft materials. These include aluminium alloys with a high silicon content, fibre-reinforced plastics and other plastics with abrasive content. Diamond is also used successfully, without chip-breaking problems, for cutting precious metals and non-ferrous heavy metals such as platinum, iridium, gold, tantalum and titanium, as well as sintered metals such as tungsten copper. The HF geometry is used for long-chipping non-ferrous metals such as all wrought aluminium alloys. These include copper and its alloys – bronze, for example, and both leadfree and low-lead (long-chipping) brass. Due to controlled chip-breaking, the geometry is able to effectively prevent problems caused by stringy swarf. The CVD-D-tipped or PCD-tipped Supermini and Mini ranges from HORN boast a number of impressive USPs in this market segment for diamond tools, including active chip-breaker geometries and internal cooling directly at the cutting edge.
Diamantschneidstoffe Diamond cutting materials
CVD-D, das Maximum an Härte Die Verschleißfestigkeit von CVD-D übertrifft die von PKD deutlich. Grund hierfür ist die nicht vorhandene, metallische Bindefase und der daraus resultierende Diamantanteil von nahezu 100 Prozent. Einzelne, monokristalline Diamantkörner werden aus Gas abgeschieden und verwachsen untrennbar miteinander zu einer soliden, polymeren Diamantschicht. Das Verfahren ähnelt der Diamantbeschichtung von Hartmetallwerkzeugen, jedoch ist dort die Schichtstärke nur wenige µm dick und somit nach relativ kurzer Einsatzdauer abgetragen. Neben der maximalen Härte kommen noch andere, positive Eigenschaften von Diamant dem Zerspanungsprozess zugute. Die besondere Wärmeleitfähigkeit sorgt für einen kühlen Schnitt. Der geringe Reibungskoeffizient und eine geringe Adhäsionsneigung verhindert zuverlässig eine Aufbauschneidenbildung. Selbst bei kritischen Aluminiumknetlegierungen kann ohne Einsatz von Kühlschmierstoff, prozesssicher zerspant werden. CVD-D, maximum strength The wear resistance of CVD-D significantly exceeds that of PCD. The reason for this is that it does not have a metallic binding chamfer and the fact that it has a resulting diamond component of almost 100 per cent. Individual, monocrystalline diamond grains are deposited from gas and grow together so that they cannot be separated to form a solid, polymeric diamond layer. The process is similar to the diamond coating of carbide tools but the layer thickness is just a few µm thick and is therefore worn away after a relatively short time in use. In addition to maximum hardness, other positive properties of diamond also benefit the machining process. Its special heat conductivity ensures cool cutting. The low coefficient of friction and a low adhesive tendency reliably prevent build-up edges from forming. Reliable machining processes can be performed even with critical aluminium wrought alloys without using cooling lubricant.
PKD ist nicht gleich PKD PKD ist ein Verbundschneidstoff. Diamantkörner, jedes für sich monokristallin, sind in einer Metallmatrix, in der Regel Kobalt, miteinander versintert. Innerhalb des Sinterprozesses kommt es zu einem interkristallinen Kornwachstum, bei dem im begrenzten Umfang, die einzelnen Körner miteinander verwachsen und somit die Verschleißeigenschaften im späteren Einsatz positiv beeinflussen. Das HORN-Hochleistung-PKD setzt sich aus einer ausgefeilten Mixtur unterschiedlicher Größen von Diamantkörnern zusammen. Der Volumenanteil von Diamant steigt, Wirkhärte, Zähigkeit und Schneidenqualität ebenso. Strenge Qualitätsstandards und deren Kontrolle sind selbstverständlich und sorgen für maximale Leistung. Not all PCD is the same PCD is a compound cutting material. Diamond grains, each one of a monocrystalline nature, are sintered to each other in a metal matrix, generally cobalt. During the sintering process, the grains grow within the crystals and the individual grains grow together to a limited extent, thereby affecting the wear properties during subsequent use. HORN high-performance PCD is comprised of a sophisticated mixture of different diamond grain sizes. The volume fraction of diamond increases, as do effective hardness, toughness and cutting quality. It goes without saying that strict quality standards are observed and monitored and ensure maximum performance.
4
Diamantschneidstoffe Diamond cutting materials
Diamant mit Spanformgeometrie, der Schlüssel zum Erfolg Die wirtschaftlichen Standzeiten von Diamantschneidstoffen, in Kombination mit der Spanformgeometrie .HF, führen zu einem optimalen Schneidsystem. Die aktive und kontrollierte Spanformung verbessern die Prozesssicherheit, Geschwindigkeit und Präzision, bei der Zerspanung von langspanenden Legierungen im Bereich der NE-Metalle. Die speziell für die Bohrungsbearbeitung entwickelte .HF Geometrie bietet eine effektive Lösung gegen unkontrollierte Wirrspäne. Hinweis: Die für die optimale Funktion wichtigen Schnittdaten finden Sie im Anhang auf den Seiten 30 und 31 Diamond with chip-breaker geometry, the key to success. The long life of diamond cutting edges combines with the .HN chip-breaker geometry to form an optimum cutting system. The active and controlled chip-forming process improves reliability, speed and precision in the machining of long-chipping non-ferrous metal alloys. The .HF geometry, which has been developed specifically for boring, offers an effective solution to prevent uncontrolled formation of stringy swarf. Note: For the relevant cutting data please see page 30 and 31.
Spanformgeometrie Chip-breaker geometry
.HF
5
BOHRUNG-DREHEN ≥ Ø 1,5 mm BORING and PROFILING
105
Schneidplatte Typ Insert Type
Bohrungs-Ø ab
1,5 mm
Bore Ø from
CVD-Diamantbestückt CVD Diamond tipped
für Klemmhalter for Toolholder
Typ
Type
B105 BKT105 H105 HC105 VDI
R = rechts wie gezeichnet
Bestellnummer Part number
R105.1001.0.15.H0.C R105.1001.2.15.H0.C R105.1001.0.2.H0.C R105.1001.2.2.H0.C R105.1002.1.3.H0.C R105.1002.3.3.H0.C R105.1002.1.4.H0.C R105.1002.3.4.H0.C R105.1002.1.5.H0.C R105.1004.1.5.H0.C R105.1002.4.5.H0.C R105.1004.4.5.H0.C
Dmin 1,5 2,0 3,0 4,0 5,0
▲ ab Lager / on stock Δ 4 Wochen / 4 weeks Abmessungen in mm Dimensions in mm
Weitere Abmessungen auf Anfrage Further sizes upon request
6
l2
l5
6 12 6 12 10 20 10 20 10 10 25 25
25 30 25 30 25 35 25 35 25 25 40 40
r
f
a
b
d
tmax
0,10
1,5
1,3
5,9
1,05
0,15
0,15
1,4
1,8
5,9
1,55
0,15
0,20
1,4
2,7
5,9
2,45
0,15
0,20
1,9
3,7
6,4
3,35
0,15
0,20 0,40 0,20 0,40
HD03
R = right hand version shown
▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲
2,3
4,7
7,0
4,35
0,15
▲ ▲ ▲
BOHRUNG-DREHEN ≥ Ø 3 mm BORING and PROFILING
105
Schneidplatte Typ Insert Type
Bohrungs-Ø ab
3 mm
Bore Ø from
PKD-bestückt PCD tipped
für Klemmhalter for Toolholder
Typ
Type
B105 BKT105 H105 HC105 VDI
R = rechts wie gezeichnet
Bestellnummer Part number
R105.1002.1.3.H5.P R105.1002.3.3.H5.P R105.1002.1.4.H5.P R105.1002.3.4.H5.P R105.1002.1.5.H5.P R105.1004.1.5.H5.P R105.1002.4.5.H5.P R105.1004.4.5.H5.P
Dmin 3 4 5
l2
l5
10 20 10 20 10 10 25 25
25 35 25 35 25 25 40 40
r
f
a
b
d
tmax
0,2
1,4
2,7
5,9
2,45
0,15
0,2
1,9
3,7
6,4
3,35
0,15
0,2 0,4 0,2 0,4
PD75
R = right hand version shown
▲ ▲ ▲ ▲ ▲
2,3
4,7
7,0
4,35
0,15
▲ ▲ ▲
▲ ab Lager / on stock Δ 4 Wochen / 4 weeks Abmessungen in mm Dimensions in mm
Weitere Abmessungen auf Anfrage Further sizes upon request
7
BOHRUNG-DREHEN ≥ Ø 4 mm BORING and PROFILING
105
Schneidplatte Typ Insert Type
mit Spanformer with chip former
Bohrungs-Ø ab
4 mm
Bore Ø from
PKD-bestückt PCD tipped
für Klemmhalter for Toolholder
Typ
Type
B105 BKT105 H105 HC105 VDI
R = rechts wie gezeichnet
Bestellnummer Part number
R105.1002.1.4.HF.P R105.1002.3.4.HF.P R105.1002.1.5.HF.P R105.1004.1.5.HF.P R105.1002.4.5.HF.P R105.1004.4.5.HF.P
Dmin 4 5
▲ ab Lager / on stock Δ 4 Wochen / 4 weeks Abmessungen in mm Dimensions in mm
Weitere Abmessungen auf Anfrage Further sizes upon request
8
l2
l5
10 20 10 10 25 25
25 35 25 25 40 40
r
f
a
b
d
tmax
0,2
1,9
3,7
6,4
3,35
0,15
0,2 0,4 0,2 0,4
PD75
R = right hand version shown
▲ ▲
2,3
4,7
7,0
4,35
0,15
▲ ▲ ▲
BOHRUNG-DREHEN ≥ Ø 4 mm BORING and PROFILING
105
Schneidplatte Typ Insert Type
Bohrungs-Ø ab
4 mm
Bore Ø from
PKD-bestückt PCD tipped
für Klemmhalter for Toolholder
Typ
Type
B105 BKT105 H105 HC105 VDI
R = rechts wie gezeichnet
Bestellnummer Part number
R105.4701.1.4.H5.P R105.4701.3.4.H5.P R105.4701.3.6.H5.P R105.4701.5.6.H5.P
Dmin 4 6
l2
l5
10 20 20 30
25 35 35 45
r
f
a
b
d
tmax
0,15
1,9
3,7
6,4
2,85
0,6
0,15
3,3
5,7
7,0
4,85
0,6
PD75
R = right hand version shown
▲ ▲ ▲ ▲
▲ ab Lager / on stock Δ 4 Wochen / 4 weeks Abmessungen in mm Dimensions in mm
Weitere Abmessungen auf Anfrage Further sizes upon request
9
BOHRUNG-DREHEN ≥ Ø 5 mm BORING and PROFILING
105
Schneidplatte Typ Insert Type
Bohrungs-Ø ab Vollradius
5,00 mm r 0,75 mm
Bore Ø from Full radius
CVD-Diamantbestückt CVD Diamond tipped
für Klemmhalter for Toolholder
Typ
B105 BKT105 H105 HC105 VDI
Type
Vollradius Full radius
R = rechts wie gezeichnet
Bestellnummer Part number
R105.VR07.1.5.H0.C
Dmin
l2
l5
r
f
a
b
d
w
tmax
5
10
25
0,75
2,3
4,7
7
3,4
1,5
1
▲ ab Lager / on stock Δ 4 Wochen / 4 weeks Abmessungen in mm Dimensions in mm
Weitere Abmessungen auf Anfrage Further sizes upon request
10
HD03
R = right hand version shown
▲
BOHRUNG-DREHEN ≥ Ø 5 mm BORING and PROFILING
105
Schneidplatte Typ Insert Type
Bohrungs-Ø ab Vollradius
5,00 mm r 0,75 mm
Bore Ø from Full radius
PKD-bestückt PCD tipped
für Klemmhalter for Toolholder
Typ
B105 BKT105 H105 HC105 VDI
Type
Vollradius Full radius
R = rechts wie gezeichnet
Bestellnummer Part number
R105.VR07.1.5.H5.P
Dmin
l2
l5
r
f
a
b
d
w
tmax
5
10
25
0,75
2,3
4,7
7
3,4
1,5
1
PD75
R = right hand version shown
▲
▲ ab Lager / on stock Δ 4 Wochen / 4 weeks Abmessungen in mm Dimensions in mm
Weitere Abmessungen auf Anfrage Further sizes upon request
11
BOHRUNG-DREHEN ≥ Ø 5 mm BORING and PROFILING
105
Schneidplatte Typ Insert Type
Bohrungs-Ø ab Stechbreite bis
5 mm 1 mm
Bore Ø from Width of groove up to
CVD-Diamantbestückt CVD Diamond tipped
für Klemmhalter for Toolholder
Typ
Type
B105 BKT105 H105 HC105 VDI
R = rechts wie gezeichnet
Bestellnummer Part number
R105.0100.1.5.H0.C R105.0100.3.5.H0.C R105.0100.5.5.H0.C
Dmin
l2
l5
f
a
b
d
w
tmax
5
10 20 30
25 35 45
2,3
4,7
7
3,5
1
1
▲ ab Lager / on stock Δ 4 Wochen / 4 weeks Abmessungen in mm Dimensions in mm
Weitere Abmessungen auf Anfrage Further sizes upon request
12
HD03
R = right hand version shown
▲ ▲ ▲
BOHRUNG-DREHEN ≥ Ø 5 mm BORING and PROFILING
105
Schneidplatte Typ Insert Type
Bohrungs-Ø ab Stechtiefe bis
5 mm 1 mm
Bore Ø from Depth of groove up to
PKD-bestückt PCD tipped
für Klemmhalter for Toolholder
Typ
Type
B105 BKT105 H105 HC105 VDI
R = rechts wie gezeichnet
Bestellnummer Part number
R105.0100.1.5.H5.P R105.0100.3.5.H5.P R105.0100.5.5.H5.P
Dmin
l2
l5
f
a
b
d
w
tmax
5
10 20 30
25 35 45
2,3
4,7
7
3,5
1
1
PD75
R = right hand version shown
▲ ▲ ▲
▲ ab Lager / on stock Δ 4 Wochen / 4 weeks Abmessungen in mm Dimensions in mm
Weitere Abmessungen auf Anfrage Further sizes upon request
13
BOHRUNG-DREHEN ≥ Ø 6,8 mm BORING and PROFILING
107
Schneidplatte Typ Insert Type
Bohrungs-Ø ab
6,8 mm
Bore Ø from
CVD-Diamantbestückt CVD Diamond tipped
für Klemmhalter for Toolholder
Typ
Type
B107
R = rechts wie gezeichnet
Bestellnummer
r
s
f
a
d
tmax
Dmin
R107.1002.1.H0.C R107.1004.1.H0.C
0,2 0,4
3,3
3,7
6,3
5,2
0,3
6,8
Part number
▲ ab Lager / on stock Δ 4 Wochen / 4 weeks Abmessungen in mm Dimensions in mm
Weitere Abmessungen auf Anfrage Further sizes upon request
14
HD03
R = right hand version shown
▲ ▲
BOHRUNG-DREHEN ≥ Ø 6,8 mm BORING and PROFILING
107
Schneidplatte Typ Insert Type
Bohrungs-Ø ab
6,8 mm
Bore Ø from
PKD-bestückt PCD tipped
für Klemmhalter for Toolholder
Typ
Type
B107
R = rechts wie gezeichnet
Bestellnummer
r
s
f
a
d
tmax
Dmin
R107.1002.1.H5.P R107.1004.1.H5.P
0,2 0,4
3,3
3,7
6,3
5,2
0,3
6,8
Part number
PD75
R = right hand version shown
▲ ▲
▲ ab Lager / on stock Δ 4 Wochen / 4 weeks Abmessungen in mm Dimensions in mm
Weitere Abmessungen auf Anfrage Further sizes upon request
15
BOHRUNG-DREHEN ≥ Ø 6,8 mm BORING and PROFILING
107
Schneidplatte Typ Insert Type
mit Spanformer with chip former
Bohrungs-Ø ab
6,8 mm
Bore Ø from
PKD-bestückt PCD tipped
für Klemmhalter for Toolholder
Typ
Type
B107
R = rechts wie gezeichnet
Bestellnummer
r
s
f
a
d
tmax
Dmin
R107.1002.1.HF.P R107.1004.1.HF.P
0,2 0,4
3,3
3,7
6,3
5,2
0,3
6,8
Part number
▲ ab Lager / on stock Δ 4 Wochen / 4 weeks Abmessungen in mm Dimensions in mm
Weitere Abmessungen auf Anfrage Further sizes upon request
16
PD75
R = right hand version shown
▲ ▲
BOHRUNG-DREHEN ≥ Ø 7,8 mm BORING and PROFILING
108
Schneidplatte Typ Insert Type
Bohrungs-Ø ab
7,8 mm
Bore Ø from
CVD-Diamantbestückt CVD Diamond tipped
für Klemmhalter for Toolholder
Typ
Type
B108
R = rechts wie gezeichnet
Bestellnummer
r
s
f
a
d
tmax
Dmin
R108.1002.H0.C R108.1004.H0.C
0,2 0,4
3,4
4,65
7,65
6
0,3
7,8
Part number
HD03
R = right hand version shown
▲ ▲
▲ ab Lager / on stock Δ 4 Wochen / 4 weeks Abmessungen in mm Dimensions in mm
Weitere Abmessungen auf Anfrage Further sizes upon request
17
BOHRUNG-DREHEN ≥ Ø 7,8 mm BORING and PROFILING
108
Schneidplatte Typ Insert Type
Bohrungs-Ø ab
7,8 mm
Bore Ø from
PKD-bestückt PCD tipped
für Klemmhalter for Toolholder
Typ
Type
B108
R = rechts wie gezeichnet
Bestellnummer
r
s
f
a
d
tmax
Dmin
R108.1002.H5.P R108.1004.H5.P
0,2 0,4
3,4
4,65
7,65
6
0,3
7,8
Part number
▲ ab Lager / on stock Δ 4 Wochen / 4 weeks Abmessungen in mm Dimensions in mm
Weitere Abmessungen auf Anfrage Further sizes upon request
18
PD75
R = right hand version shown
▲ ▲
BOHRUNG-DREHEN ≥ Ø 7,8 mm BORING and PROFILING
108
Schneidplatte Typ Insert Type
mit Spanformer with chip former
Bohrungs-Ø ab
7,8 mm
Bore Ø from
PKD-bestückt PCD tipped
für Klemmhalter for Toolholder
Typ
Type
B108
R = rechts wie gezeichnet
Bestellnummer
r
s
f
a
d
tmax
Dmin
R108.1002.HF.P R108.1004.HF.P
0,2 0,4
3,4
4,65
7,65
6
0,3
7,8
Part number
PD75
R = right hand version shown
▲ ▲
▲ ab Lager / on stock Δ 4 Wochen / 4 weeks Abmessungen in mm Dimensions in mm
Weitere Abmessungen auf Anfrage Further sizes upon request
19
BOHRUNG-DREHEN ≥ Ø 11 mm BORING and PROFILING
111
Schneidplatte Typ Insert Type
Bohrungs-Ø ab
11,0 mm
Bore Ø from
CVD-Diamantbestückt CVD Diamond tipped
für Klemmhalter for Toolholder
Typ
Type
B111
R = rechts wie gezeichnet
Bestellnummer
r
s
f
a
d
tmax
Dmin
R111.1002.H0.C R111.1004.H0.C
0,2 0,4
3,95
6,7
10,7
8
0,4
11
Part number
▲ ab Lager / on stock Δ 4 Wochen / 4 weeks Abmessungen in mm Dimensions in mm
Weitere Abmessungen auf Anfrage Further sizes upon request
20
HD03
R = right hand version shown
▲ ▲
BOHRUNG-DREHEN ≥ Ø 11 mm BORING and PROFILING
111
Schneidplatte Typ Insert Type
Bohrungs-Ø ab
11,0 mm
Bore Ø from
PKD-bestückt PCD tipped
für Klemmhalter for Toolholder
Typ
Type
B111
R = rechts wie gezeichnet
Bestellnummer
r
s
f
a
d
tmax
Dmin
R111.1002.H5.P R111.1004.H5.P
0,2 0,4
3,95
6,7
10,7
8
0,4
11
Part number
PD75
R = right hand version shown
▲ ▲
▲ ab Lager / on stock Δ 4 Wochen / 4 weeks Abmessungen in mm Dimensions in mm
Weitere Abmessungen auf Anfrage Further sizes upon request
21
BOHRUNG-DREHEN ≥ Ø 11 mm BORING and PROFILING
111
Schneidplatte Typ Insert Type
mit Spanformer with chip former
Bohrungs-Ø ab
11 mm
Bore Ø from
PKD-bestückt PCD tipped
für Klemmhalter for Toolholder
Typ
Type
B111
R = rechts wie gezeichnet
Bestellnummer
r
s
f
a
d
tmax
Dmin
R111.1002.HF.P R111.1004.HF.P
0,2 0,4
3,95
6,7
10,7
8
0,4
11
Part number
▲ ab Lager / on stock Δ 4 Wochen / 4 weeks Abmessungen in mm Dimensions in mm
Weitere Abmessungen auf Anfrage Further sizes upon request
22
PD75
R = right hand version shown
▲ ▲
BOHRUNG-DREHEN ≥ Ø 13,8 mm BORING and PROFILING
114
Schneidplatte Typ Insert Type
Bohrungs-Ø ab
13,8 mm
Bore Ø from
CVD-Diamantbestückt CVD Diamond tipped
für Klemmhalter for Toolholder
Typ
Type
B114
R = rechts wie gezeichnet
Bestellnummer
r
s
f
a
d
tmax
Dmin
R114.1002.H0.C R114.1004.H0.C R114.1008.H0.C
0,2 0,4 0,8
5,3
8,7
13,2
9
0,4 0,4 0,3
13,8
Part number
HD03
R = right hand version shown
▲ ▲ ▲
▲ ab Lager / on stock Δ 4 Wochen / 4 weeks Abmessungen in mm Dimensions in mm
Weitere Abmessungen auf Anfrage Further sizes upon request
23
BOHRUNG-DREHEN ≥ Ø 13,8 mm BORING and PROFILING
114
Schneidplatte Typ Insert Type
Bohrungs-Ø ab
13,8 mm
Bore Ø from
PKD-bestückt PCD tipped
für Klemmhalter for Toolholder
Typ
Type
B114
R = rechts wie gezeichnet
Bestellnummer
r
s
f
a
d
tmax
Dmin
R114.1002.H5.P R114.1004.H5.P R114.1008.H5.P
0,2 0,4 0,8
5,3
8,7
13,2
9
0,4 0,4 0,3
13,8
Part number
▲ ab Lager / on stock Δ 4 Wochen / 4 weeks Abmessungen in mm Dimensions in mm
Weitere Abmessungen auf Anfrage Further sizes upon request
24
PD75
R = right hand version shown
▲ ▲ ▲
BOHRUNG-DREHEN ≥ Ø 13,8 mm BORING and PROFILING
114
Schneidplatte Typ Insert Type
mit Spanformer with chip former
Bohrungs-Ø ab
13,8 mm
Bore Ø from
PKD-bestückt PCD tipped
für Klemmhalter for Toolholder
Typ
Type
B114
R = rechts wie gezeichnet
Bestellnummer
r
s
f
a
d
tmax
Dmin
R114.1002.HF.P R114.1004.HF.P R114.1008.HF.P
0,2 0,4 0,8
5,3
8,7
13,2
9
0,4 0,4 0,3
13,8
Part number
PD75
R = right hand version shown
▲ ▲ ▲
▲ ab Lager / on stock Δ 4 Wochen / 4 weeks Abmessungen in mm Dimensions in mm
Weitere Abmessungen auf Anfrage Further sizes upon request
25
EINSTECHEN ≥ Ø 14 mm GROOVING
114
Schneidplatte Typ Insert Type
Bohrungs-Ø ab Vollradius
14,0 mm r 1,0 - 1,5 mm
Bore Ø from Full radius
CVD-Diamantbestückt CVD Diamond tipped
für Klemmhalter for Toolholder
Typ
Type
B114 HC114
Vollradius Full radius
R = rechts wie gezeichnet
Bestellnummer
w
r
s
f
a
d
tmax
Dmin
R114.VR20.H0.C R114.VR30.H0.C
2 3
1,0 1,5
5,3
9
13,5
9
4
14
Part number
▲ ab Lager / on stock Δ 4 Wochen / 4 weeks Abmessungen in mm Dimensions in mm
Weitere Abmessungen auf Anfrage Further sizes upon request
26
HD03
R = right hand version shown
▲ ▲
EINSTECHEN ≥ Ø 14 mm GROOVING
114
Schneidplatte Typ Insert Type
Bohrungs-Ø ab Vollradius
14,0 mm r 1,0 - 1,5 mm
Bore Ø from Full radius
PKD-bestückt PCD tipped
für Klemmhalter for Toolholder
Typ
Type
B114 HC114
Vollradius Full radius
R = rechts wie gezeichnet
Bestellnummer
w
r
s
f
a
d
tmax
Dmin
R114.VR20.H5.P R114.VR30.H5.P
2 3
1,0 1,5
5,3
9
13,5
9
4
14
Part number
PD75
R = right hand version shown
▲ ▲
▲ ab Lager / on stock Δ 4 Wochen / 4 weeks Abmessungen in mm Dimensions in mm
Weitere Abmessungen auf Anfrage Further sizes upon request
27
EINSTECHEN (innen) ≥ Ø 14 mm GROOVING (internal)
114
Schneidplatte Typ Insert Type
Bohrungs-Ø ab Stechtiefe Stechbreite
14 mm 4 mm 1 - 3 mm
Bore Ø from Depth of groove Width of groove
CVD-Diamantbestückt CVD Diamond tipped
für Klemmhalter for Toolholder
Typ
Type
B114 HC114
R = rechts wie gezeichnet
Bestellnummer
w
s
f
a
d
tmax
Dmin
R114.0100.H0.C R114.0200.H0.C R114.0300.H0.C
1 2 3
5,3
9
13,5
9
4
14
Part number
▲ ab Lager / on stock Δ 4 Wochen / 4 weeks Abmessungen in mm Dimensions in mm
Weitere Abmessungen auf Anfrage Further sizes upon request
28
HD03
R = right hand version shown
▲ ▲ ▲
EINSTECHEN (innen) ≥ Ø 14 mm GROOVING (internal)
114
Schneidplatte Typ Insert Type
Bohrungs-Ø ab Stechtiefe Stechbreite
14 mm 4 mm 1 - 3 mm
Bore Ø from Depth of groove Width of groove
PKD-bestückt PCD tipped
für Klemmhalter for Toolholder
Typ
Type
B114 HC114
R = rechts wie gezeichnet
Bestellnummer
w
s
f
a
d
tmax
Dmin
R114.0100.H5.P R114.0200.H5.P R114.0300.H5.P
1 2 3
5,3
9
13,5
9
4
14
Part number
PD75
R = right hand version shown
▲ ▲ ▲
▲ ab Lager / on stock Δ 4 Wochen / 4 weeks Abmessungen in mm Dimensions in mm
Weitere Abmessungen auf Anfrage Further sizes upon request
29
Schnittdaten Cutting data
Werkstoff Material
Al-Knetlegierungen
Al-wrought alloys
untereutektisches Aluminium Aluminium alloys up to 12% Si content
übereutektisches Aluminium Aluminium alloys with 12-20% Si content
Magnesium Magnesium
Kupfer, Bronze, Messing bleifrei Copper, Bronze, Brass without lead
Kupfer OFHC, Wolfram-Kupfer OFHC Copper, Tungsten copper
Zink, Messing Zinc, Brass
Neusilber, Kupfer-Nickel-Legierungen Nickel silver, Copper-nickel-alloys
Titan, Platin, Iridium Titanium, Platin, Iridium
Graphit Graphite
Hartmetall und Keramik Carbide and ceramik
Kunststoffe, Faserverbundwerkstoffe Synthetics, Reinforced plastics
GFK
GFRP
CFK
CRFP
.H0
.H5
.H5
.H5 / .HF
.H5
.H5 / .HF
.H5 / .HF
.HF
.HF
.HF
25
50
40
80
100
50
90
100
80
100
150
vc min [m/min]
1700
80
1000
250
450
1800
800
1600
4000
1500
3500
4500
vc max [m/min]
Schnittgeschwindigkeit vc
.H0
120
500
Ausführung
.H5
100
300
Cutting speed vc
.H5 / .H0
80
Version
.H5 / .H0
Kühlschmierstoff (Empfehlung)
Coolant (Recommendation)
Emulsion
Emulsion
Emulsion
Emulsion
Emulsion
Emulsion
Emulsion
Emulsion
Oil
Öl
Oil
Öl
Oil
Öl
Emulsion
Emulsion
Emulsion
Emulsion
Air
Luft
Air
Luft
Air
Luft
Air
Luft
Air
Luft
30
Schnittdaten Cutting data
Werkstoff Material
HORN 3D-Spanleitstufe
Eckenradius
HORN 3D chip breaker
Corner radius
.HF Schnitttiefe
Vorschub
ap
f
[mm]
[mm/U] [mm/rev]
Depth of cut
Aluminium, Knetlegierungen
Aluminium, Wrought alloys
Messing bleifrei
Brass without lead
Feed rate
[mm]
min
max
min
max
0,2
0,05
1,1
0,05
0,10
0,4
0,07
1,2
0,06
0,15
0,2
0,05
1,0
0,05
0,10
0,4
0,10
1,2
0,08
0,15
Bei der Schnitttiefe ap ist der Anstellwinkel des eingesetzten Klemmhalters zu beachten. Please consider the ap in relation to the approach angle of the toolholder.
Dmin Angabe wird gegebenenfalls durch Materialeigenschaften beeinflusst. The specified Dmin value may be affected by material properties.
31
EINSTECHEN
ABSTECHEN
NUTFRÄSEN
NUTSTOSSEN
KOPIERFRÄSEN
USA HORN USA, Inc. 320 Premier Court, Suite 205, Franklin, TN 37067 Tel +1 (888)818-HORN, Fax +1(615)771-4101 E-Mail
[email protected], www.hornusa.com
Großbritannien / UK and Ireland HORN CUTTING TOOLS Ltd. 32 New Street, Ringwood, Hampshire, BH24 3AD, Tel +44 (0)1425/481 800 Fax +44 (0)1425/481 888 E-Mail
[email protected], www.phorn.co.uk
Ungarn / Hungary HORN Magyarország Kft. H-9027 Györ, Gesztenyefa u. 4 Tel +36 96 55 05 31, Fax +36 96 55 05 32 E-Mail
[email protected], www.phorn.hu
Frankreich / France HORN S.A.S 665, av. Blaise Pascal, Zone Industrielle, 77127 Lieusaint Tel +33 (0)1648859-58, Fax +33 (0)1648860-49 E-Mail
[email protected], www.horn.fr
China HORN (Shanghai) Trading Co. Ltd. Room 905, No. 518 Anyuan Road, P.R. of China Putuo District, Shanghai 200060 上海市安远路518号905室 邮编:200060 Tel: +86 21 52833505;52833205 Fax:+86 21 52832562 E-Mail:
[email protected], www.phorn.cn
INFO13.16DE, 11/2016, Printed in Germany
Deutschland / Germany Hartmetall Werkzeugfabrik Paul HORN GmbH Unter dem Holz 33-35, D-72072 Tübingen Tel +49 (0)7071/70040, Fax +49 (0)7071/72893 E-Mail
[email protected], www.phorn.de
REIBEN
TECHNO LO G I EVO RSPRU N G I S T H O R N HO RN - EXCELLENCE I N T E C H N O L O G Y
GROOVING
PARTING OFF
GROOVE MILLING
BROACHING
PROFILE MILLING
REAMING