AMPCO ARCHITECTURAL FLUSH WOOD DOOR SPECIFICATIONS

AMPCO DOORS

AMPCO ARCHITECTURAL - FLUSH WOOD VENEER DOOR SPECIFICATIONS

SUBMITTAL SHEETS FOR 5- PLY WOOD VENEER DOORS

WWW.AMPCO.COM

VENEER

www.ampco.com • 305.821.5700 ext. 355 •

Ampco Products, LLC. 11400 NW 36th Avenue Miami, FL 33167 Voice: 305.821.5700 Fax: 305.455.4681 [email protected] [email protected] 02/2013

1

AMPCO ARCHITECTURAL FLUSH WOOD DOOR SPECIFICATIONS

AMPCO DOORS

SUBMITTAL SHEETS FOR WOOD VENEER DOORS Job Name: _______________________________

Contract/Job Number: _____________

Submitted by: _____________________________

Date: _______ Sheet_____of__________

Revisions: ____________________ Date: __________ By: _____________________ Revisions: ____________________ Date: __________ By: _____________________ Door Types (enter quantity required):

PC Wood

PC20 Wood 5 ply particle board core

(AWl PC5)



SLC Wood

SLC20 Wood 5 ply staved lumber core

(AWl SLC5)



MC45 Wood

5 ply 45 minute mineral core fire door, C label

(AWl FD 3/4)



MC60 Wood

5 ply 60 minute mineral core fire door, B label

(AWl FD 1)



MC90 Wood

5 ply 90 minute mineral core fire door, B label

(AWl FD 1 1/ 2)



STC Wood

Sound Attenuation Core

(ASTM E-90-90)



STC37-40MC45 Wood Sound Attenuation Mineral 45 min Fire Rated Core, C label



LL Wood



AF Wood

5 ply lead bonded to particle board core (AWl LL) AF20 Wood 5 ply Agrifiber core

Stiles: Bonded to the core. Mill option hardwood or match to face veneer. End Rails: Bonded to the core. Mill option hardwood or structural composite lumber (SCL) Face Veneers (specify grade, cut and species): ________________________________________________________ ___________________________________________________________________ Glass Openings (specify size, location, moulding type and glass thickness): ________________________________ ___________________________________________________________________ Louvers (specify size, location, louver type and if metal, specify moulding type and louver thickness): ___________________________________________________________________________________ Prefit Clearances: Standard (For hinged doors: 1/8” top, 5/8” bottom, singles 1/4” width, pairs 3/ I6” width) Other (please specify): _________________

www.ampco.com • 305.821.5700 ext. 355 • [email protected]

WWW.AMPCO.COM

VENEER

Edge Machining: Standard (For hinged doors: bevel both edges 1/8” in 2”) Other (please specify): _________________ Packaging: Standard Other (please specify): _______________________ 02/2013

2

AMPCO ARCHITECTURAL FLUSH WOOD DOOR SPECIFICATIONS

Quality Standards: Conforms to WDMA Industry Standard I.S.- 1A, and Architectural Woodwork Institute section 9 for type PC5, PC7 or FD 1/3, and ASTM E-152, Fire Test of Door Assemblies as performed by Warnock Hersey International.

Faces: 1/8” - 2 ply or 3 ply hot pressed, cross banded hardwood face veneer meeting AWI or WDMA grading rules as specified. Type II bond between plys as specified. 1/42” face veneer prior to sanding. Running, book match to be provided if nothing is specified.

Maximum Size: Single Door: (Unrated) 4/0 x 10/0 Single Door: (20 minute) 4/0 X 10/0 Pairs: (Unrated) 8/0 X 10/0 Pairs: (20 minute) 8/0 X 10/0 Double Egress: 8/0 X 9/0 with concealed vertical rod exit devices.

Adhesive: Type I or Type II bond, by specification, between faces and core/frame components. Formulated using no urea formaldehyde.

Thickness: 1 3/4” or 1 3/8” (±1/16”) Frame Components: Stiles: (before trim or prefit) 1 1/4” mill option kiln-dried hardwood or stiles to match face veneer species. Bonded to the core. Rails: (before trim or prefit) 1 1/4” mill option kiln-dried hardwood or structural composite lumber (SCL). Bonded to the core. Interior Blocking: In some applications the addition of optional solid wood interior blocking may be required due to fire rating and hardware specifications. Vision Panels: (20 minute) Maximum lite size for 20 minute fire rating, no more than 1296 sq in.

AMPCO DOORS

PC/PC20 Wood Veneer PARTICLE BOARD CORE AWI: PC-5, PC-7 OR FD 1/3

Assembly: 5 ply or 7 ply when using 2 ply or 3 ply hardwood face veneer. Core and frame components are bonded and uniformly sanded to a thickness of 1 1/2” (± .015). For FD 1/3, core and frame components ore assembled to meet or exceed 20 minute specifications. Warranty: Lifetime from date of manufacture. For original installation only. Label Authority: For FD 1/3, labeled and classified by Warnock Hersey International as a 20 minute fire/smoke barrier. Restrictions on machining and architectural accessories or application are per that authority. *Fire labeled doors may not be refit in the field if already factory prefit or machine sized.

Core: Wood particleboard door core to meet or exceed American National Standard ANSI A208.1 for I-LD-2 Door Core. Mat-formed particleboard with density approx. 28-32 pounds per cubic feet (pcf) to meet or exceed Commercial Standard CS 236-66 for Type 1 grade C, Class 1. Exceeds requirements for 20 minute construction authority. Finish: Available in clear finish only. WDMA-TR-6. Catalyzed Polyurethane and UV cured. Edge banding is finished first, then applied to stiles.

VENEER

www.ampco.com • 305.821.5700 ext. 355 • [email protected]

WWW.AMPCO.COM

02/2013

3

AMPCO ARCHITECTURAL FLUSH WOOD DOOR SPECIFICATIONS

Quality Standards: Conforms to WDMA Industry Standard 1.S.-1A, and Architectural Woodwork Institute section 9 for types SLC-5, SLC-7 or FD 1/3, and ASTM E-152, Fire Test of Door Assemblies as performed by Warnock Hersey International.

Assembly: 5 ply or 7 ply when using 2 ply or 3 ply hardwood face veneer. Core and frame components are bonded and uniformly sanded to a thickness of 1 1/2” (± .015). For FD 1/3, core and frame components ore assembled to meet or exceed 20 minute specifications.

Maximum Size: (Neutral Pressure) Single Door: (unrated) 4/0 X 10/0 Single Door: (20 minute) 4/0 X 10/0 Pairs: (unrated) 8/0 X 10/0 Pairs: (20 minute) 8/0 X 10/0 Double egress: (20 minute) 8/0 X 9/0 with concealed vertical rod exit devices.

Warranty: Lifetime from date of manufacture. For original installation only.

Thickness: 1 3/4” (± 1/16”)

Application Exception: Exterior application of this product requires specification of Type I optional adhesives for construction of all door components including faces. This application also requires additional architectural accessories and special finishes (see Architectural Accessories Details Section V), and reduces the warranty period from lifetime to two years.

AMPCO DOORS

SLC/SLC20 Wood Veneer STAVE LUMBER CORE AWI: SLC-5, SLC-7 or OR FD 1/3

Label Authority: May be labeled and classified by Warnock Hersey International as a 20 minute fire/smoke barrier. Restrictions on machining and architectural accessories or application are per that authority.

Frame Components: Stiles: (before trim or prefit) 1 1/4” mill option kiln-dried hardwood or stiles to match face veneer species. Bonded to the core. Rails: (before trim or prefit) 1 1/4” mill option kiln-dried hardwood. Bonded to the core.

*Fire labeled doors may not be refit in the field if already factory prefit or machine sized.

Interior Blocking: None required. Vision Panels: (20 minute) Maximum lite size for 20 minute fire rating, no more than 1296 sq in. Core: Staved lumber core with maximum 2 1/2” width low density wood blocks bonded together. Manufactured to WDMA I .S-1A sections C2 for Solid Wood Block Core. Finish: Available in clear finish only. WDMA-TR-6. Catalyzed Polyurethane and UV cured. Edge banding is finished first, then applied to stiles. Faces: 1/8” - 2 ply or 3 ply hot pressed, cross banded hardwood face veneer meeting AWl or WDMA grading rules as specified. Type II bond between plys as specified. 1/42” face prior to sanding. Running, book match to be provided if nothing is specified.

www.ampco.com • 305.821.5700 ext. 355 • [email protected]

WWW.AMPCO.COM

VENEER

Adhesive: Type I or Type II bond, by specification, between faces and core/frame components. Formulated using no urea formaldehyde. 02/2013

4

AMPCO ARCHITECTURAL FLUSH WOOD DOOR SPECIFICATIONS

Quality Standards: Conforms to WDMA Industry Standard 1.S.-1A, and Architectural Woodwork Institute section 9 for Type FD 3/4”, ASTM E-152 fire test of door assemblies as performed by Warnock Hersey International. Maximum Size: Single Door: (unrated) 4/0 X 10/0, 4/0 X 10/0 with transom. Pairs: 8/0 X 9/0 Double egress: 8/0 X 8/0 Metal edge and astragal required for all pairs.

Adhesive: Type I or Type II bond, by specification, between faces and core/frame components. Formulated using no urea formaldehyde.

AMPCO DOORS

MC45 Wood Veneer C LABEL 45 MINUTE FIRE DOOR AWI: FD 3/4

Assembly: 5 ply or 7 ply when using 2 ply or 3 ply hardwood face Veneer. Core and frame components are bonded per Warnock Hersey manufacturing authorities and sanded to uniform thickness of 1 1/2” (± .015). Warranty: Lifetime from date of manufacture. For original installation only.

Thickness: 1 3/4” (± 1/16”) Frame Components: Stiles: (before trim or prefit) 1 1/4” mill option hardwood untreated or clear fir with a minimum density of 28.75 pounds per cubic feet (pcf) or other species having equal density. Bonded to the core. Rails: (before trim or prefit) Top: 1 1/4” untreated hardwood or clear fir with a minimum of 28.75 pd or other species having an equal density. Bonded to the core. Bottom: 1 1/4” hardwood with minimum of 28.75 pd or other species having an equal density. Bonded to the core.

Label Authority: Labeled and classified by Warnock Hersey International as a 45 minute fire barrier in sizes as described above with vision panels having aggregate areas of 1296 square inches either singularly or in multiples. *Fire labeled doors may not be refit in the field if already factory prefit or machine sized.

Interior Blocking: In some applications the addition of optional GP Firestop composition may be required due to fire rating and hardware specifications. Core: Georgia Pacific gypsum type mineral substance with minimum density of 26 pounds per cubic foot. Finish: Available in clear finish only. WDMA-TR-6. Catalyzed Polyurethane and UV cured. Edge banding is finished first, then applied to stiles.

www.ampco.com • 305.821.5700 ext. 355 • [email protected]

WWW.AMPCO.COM

VENEER

Faces: 1/8”- 2 ply or 3 ply hot pressed, cross banded hardwood face veneer meeting AWl or WDMA grading rules as specified. Type II bond between plys as specified. 1/42” face prior to sanding. Running, book match to be provided if nothing is specified. 02/2013

5

AMPCO ARCHITECTURAL FLUSH WOOD DOOR SPECIFICATIONS

Quality Standards: Conforms to WDMA Industry Standard 1.S.-1A, and Architectural Woodwork Institute section 9 for Type FD 1, ASTM E-152 fire test of door assemblies as performed by Warnock Hersey International.

provided if nothing is specified.

Maximum Size: Single Door: (unrated) 4/0 x 10/0, 3/0 x 10/0 with transom (3/0 x 3/0 maximum transom. Must be pre installed with transom bar of rabbet joint not used.) Pairs: 8/0 x 9/0 Double egress: 8/0 x 8/0. Double egress is larger with intumescent material. Metal edge and astragal required for all pairs.

Assembly: 5 ply or 7 ply when using 2 ply or 3 ply hardwood face veneer. Core and frame component are bonded per Warnock Hersey manufacturing authorities and sanded to a uniform thickness of 1 1/2” (+ .015”).

Adhesive: Type I or Type II bond, by specification, between faces and core/frame components. Formulated using no urea formaldehyde.

AMPCO DOORS

MC60 Wood Veneer B LABEL 60 MINUTE FIRE DOOR AWI: FD 1

Warranty: Lifetime from date of manufacture. For original installation only. Label Authority: Labeled and classified by Warnock Hersey International as a 60 minute fire barrier in sizes as described above.

Thickness: 1 3/4” (± 1/16”) Frame Components: Stiles: (before trim or prefit) 15/16” Georgia Pacific firestop composition laminated to 3/ 8” hardwood. Bonded to the core. Rails: (before trim or prefit) Top: 1” Georgia Pacific firestop composition. Bonded to core. Bottom: 1 1/2” Georgia Pacific firesfop composition. Bonded to core.

*Fire labeled doors may not be refit in the field if already factory prefit or machine sized.

Interior Blocking: In some applications, the addition of optional solid Georgia Pacific firestop composition may be required due to fire rating and hardware specifications. Contains no asbestos. Vision Panels: Maximum Lite size for 60 minute fire rating - 100 sq in. Core: Georgia Pacific gypsum type mineral substance with minimum density of 26 pounds per cubic foot. Finish: Available in clear finish only. WDMA-TR-6. Catalyzed Polyurethane and UV cured. Edge banding is finished first, then applied to stiles.

www.ampco.com • 305.821.5700 ext. 355 • [email protected]

WWW.AMPCO.COM

VENEER

Faces: 1/8” - 2 ply or 3 ply hot pressed, cross banded hardwood face veneer meeting AWl or WDMA grading rules as specified. Type II bond between plys as specified. 1/42” face prior to sanding. Running, book match to be 02/2013

6

AMPCO ARCHITECTURAL FLUSH WOOD DOOR SPECIFICATIONS

Quality Standards: Conforms to WDMA Industry Standard 1.S.-1A and Architectural Woodwork Institute section 9 for type FD 1 1/2, and ASTM E-152, Fire Test of Door Assemblies as performed by Wornock Hersey International.

provided if nothing is specified.

Maximum Size: Single Door: 4/0 x 10/0, 3/0 x 10/0 with transom (3/0 x 3/0 maximum transom). Must be installed.with steel frame transom bar. Pairs: 8/0 x 9/0. Metal edge and astragal required for all pairs. Double egress: 8/0 x 8/0 with surface vertical rod exit device or concealed vertical rods.

Assembly: 5 ply or 7 ply when using 2 ply or 3 ply hardwood face veneer. Core and frame component are bonded per Warnock Hersey manufacturing authorities and sanded to a uniform thickness of 1 1/2” (+ .015”).

Thickness: 1 3/4” (± 1/16”) Frame Components: Stiles: (before trim or prefit) 11/8” Georgia Pacific firestop composition laminated to 3/8” hardwood. Bonded to the core. Rails: (before trim or prefit) Top: 1” firestop composition. Bonded to core. Bottom: 1 1/2” Georgia Pacific firestop composition. Bonded to core.

Adhesive: Type I or Type II bond, by specification, between faces and core/frame components. Formulated using no urea formaldehyde.

AMPCO DOORS

MC90 Wood Veneer B LABEL 90 MINUTE FIRE DOOR AWI: FD 1 1/2

Warranty: Lifetime from date of manufacture. For original installation only. Label Authority: Labeled and classified by Warnock Hersey International as a 90 minute fire barrier in sizes as described above with vision panels having aggregate areas of 100 square inches either singularly or in multiples, or fusible link louvers having aggregate areas of 576 square inches either singularly or in multiples. *Fire labeled doors may not be refit in the field if already factory prefit or machine sized.

Interior Blocking: In some applications the addition of optional Firestop composition may be required due to fire rating and hardware specifications. Vision Panels: Maximum Lite size for 90 minute fire rating - 100 sq in. Core: Georgia Pacific homogenous gypsum type mineral substance with minimum density of 26 pounds per cubic foot. Finish: Available in clear finish only. WDMA-TR-6. Catalyzed Polyurethane and UV cured. Edge banding is finished first, then applied to stiles.

www.ampco.com • 305.821.5700 ext. 355 • [email protected]

WWW.AMPCO.COM

VENEER

Faces: 1/8” - 2 ply or 3 ply hot pressed, cross banded hardwood face veneer meeting AWl or WDMA grading rules as specified. Type II bond between plys as specified. 1/42” face prior to sanding. Running, book match to be 02/2013

7

AMPCO ARCHITECTURAL FLUSH WOOD DOOR SPECIFICATIONS

Quality Standards: ANSI/WDMA I.S 1-A and AWI Section 9 Quality Standards. Doors shall be clad in WDMA premium “A” grade wood veneer with minimum thickness 1/42” before sanding with Type 1 adhesive. Both domestic and exotic hardwood species available. Sound ratings were achieved through testing in accordance with ASTM E-90-90.

Assembly: Bonded core and frame assembly is uniformly sanded to a thickness of 1-1/2” (I.015”) Door Features: Pairs and sets: Not Available (single flush only) Standard Bevel: 1/8” in 2”

AMPCO DOORS

SOUND ATTENUATION STC41 AND STC42 WOOD VENEER

Clearances: 1/8” top, 1/8” lock and hinge stiles. See NFPA-80 6.3.1.7, 2007 edition, for bottom clearances.

Maximum Size: 4/0 x 8/0 single doors only Thickness: 1-3/4” (± 1/16”)

Hardware preparation: All cutouts for mortise hardware shall be made at the factory from hardware manufacturer’s templates and approved shop drawing.

Frame Components: Stile: 1- 1/4” SCL Top Rail: 1-1/4” SCL Bottom Rail: 5”

Warranty: One year from date of manufacture. For original installation only.

Interior Blocking: As required. 5” bottom rail is standard

*Doors will be shipped complete with Ampco’s gasket and drop seal system. Note: Please Refer to Sealing Requirements Document.

Vision Panels: Not available. Flush doors only Core: Proprietary core (HDF outer ply) Finish: Available in clear finish only. WDMA-TR-6. Catalyzed Polyurethane and UV cured. Edge banding is finished first, then applied to stiles. Faces: 1/8” - 2 ply or 3 ply hot pressed, cross banded hardwood face veneer meeting AWl or WDMA grading rules as specified. Type II bond between plys as specified. 1/42” face prior to sanding. Running, book match to be provided if nothing is specified. Adhesive: Type I or Type II bond, by specification, between faces and core/frame components. Formulated using no ureaformaldehyde. Seal System

Perimeter Seal

Stop

Bottom Rail

Door Bottom

Threshold

PEMKO S-88 Gasket (black)

N/A

Zero 119W Spring Weatherstrip (bronze)

N/A

N/A

STC 42

PEMKO S-88 Gasket (black)

N/A

Zero 119W Spring Weatherstrip (bronze)

N/A

Zero 564A (Mill Aluminum)

www.ampco.com • 305.821.5700 ext. 355 • [email protected]

WWW.AMPCO.COM

VENEER

STC 41

02/2013

8

AMPCO ARCHITECTURAL FLUSH WOOD DOOR SPECIFICATIONS

Quality Standards: ANSI/WDMA I.S 1-A and AWI Section 9 Quality Standards. Doors shall be clad in WDMA premium “A” grade wood veneer with minimum thickness 1/42” before sanding with Type 1 adhesive. Both domestic and exotic hardwood species available.

Assembly: Bonded core and frame assembly is uniformly sanded to a thickness of 1-1/2” (I.015”)

Sound ratings were achieved through testing in accordance with ASTM E-90-90.

Clearances: 1/8” top, 1/8” lock and hinge stiles. See NFPA-80 6.3.1.7, 2007 edition, for bottom clearances.

Maximum Size: 4/0 x 8/0 single doors only

Hardware preparation: All cutouts for mortise hardware shall be made at the factory from hardware manufacturer’s templates and approved shop drawing.

Thickness: 1-3/4” (± 1/16”) Frame Components: Stile: 1- 1/4” SCL Top Rail: 1-1/4” SCL Bottom Rail: 5”

Door Features:Pairs and sets: Not Available (single flush only) Standard Bevel: 1/8” in 2”

AMPCO DOORS

SOUND ATTENUATION STC45 & STC46 WOOD VENEER

Warranty: One year from date of manufacture. For original installation only.

Interior Blocking: As required. 5” bottom rail is standard

*Doors will be shipped complete with Ampco’s gasket and drop seal system.

Vision Panels: Not available. Flush doors only Core: Proprietary core (HDF outer ply) Finish: Available in clear finish only. WDMA-TR-6. Catalyzed Polyurethane and UV cured. Edge banding is finished first, then applied to stiles. Faces: 1/8” - 2 ply or 3 ply hot pressed, cross banded hardwood face veneer meeting AWl or WDMA grading rules as specified. Type II bond between plys as specified. 1/42” face prior to sanding. Running, book match to be provided if nothing is specified. Adhesive: Type I or Type II bond, by specification, between faces and core/frame components. Formulated using no urea formaldehyde. Seal System

Perimeter Seal

Stop PEMKO S-88 Gasket (black)

STC 46

Zero 119W Spring Weatherstrip (bronze) & Zero 475 Gasket (Anod. Aluminum)

N/A

Bottom Rail

Door Bottom

Threshold

N/A

Zero 369A (Anod. Aluminum)

N/A

N/A

Zero 369A (Anod. Aluminum)

N/A

www.ampco.com • 305.821.5700 ext. 355 • [email protected]

WWW.AMPCO.COM

VENEER

STC 45

Zero 119W Spring Weatherstrip (bronze)

02/2013

9

AMPCO ARCHITECTURAL FLUSH WOOD DOOR SPECIFICATIONS

Quality Standards: Conforms to WDMA Industry Standard I.S.-1A, and Architectural Woodwork Institute section 9 for type FD 3/4, and ASTM E -152, Fire Test of Door Assemblies as performed by Warnock Hersey International.

AMPCO DOORS

(C LABEL 45 min door) Sound Attenuation Mineral Fire Rated Core STC37MC45,STC38MC45, STC39MC45, STC40MC45 Door Features: Pairs and sets: Not Available (single only) Standard Bevel: 1/8” in 2” Clearances: 1/8” top, 1/8” lock and hinge stiles. See NFPA-80 6.3.1.7, 2007 edition, for bottom clearances.

Maximum Size: 3/0 x 7/0 single doors only Thickness: 1-3/4” (± 1/16”)

Hardware preparation: All cutouts for mortise hardware shall be made at the factory from hardware manufacturer’s templates and approved shop drawing.

Frame Components: Stile: 1” FSII Top Rail: 1-1/2” FSII Bottom Rail: 5” FSI

Warranty: One year from date of manufacture. For original installation only.

Interior Blocking: As required. 5” FSI bottom rail is standard

*Doors will be shipped complete with Ampco’s gasket and drop seal system.

Vision Panels: 100 sq. inches maximum visible area. Anemostat LoPro IS Vision Kit with 19mm (3/4”) Pyrostop Glazing Core: Proprietary core (HDF outer ply) Finish: Available in clear finish only. WDMA-TR-6. Catalyzed Polyurethane and UV cured. Edge banding is finished first, then applied to stiles. Faces: 1/8” - 2 ply or 3 ply hot pressed, cross banded hardwood face veneer meeting AWl or WDMA grading rules as specified. Type II bond between plys as specified. 1/42” face prior to sanding. Running, book match to be provided if nothing is specified. Adhesive: Type I or Type II bond, by specification, between faces and core/frame components. Formulated using no urea formaldehyde. Assembly: Bonded core and frame assembly is uniformly sanded to a thickness of 1-1/2” (I.015”) Seal System

Perimeter Seal

Door Bottom

Threshold

Zero 475

Zero 369

N/A

STC38 MC45

2 rows of NGP 5050

NGP 321V

NGP950S

STC39 MC45

Zero 475 and 119WB

Zero 369

N/A

STC40 MC45

Zero 475 and 119WB

Zero 369

N/A

www.ampco.com • 305.821.5700 ext. 355 • [email protected]

WWW.AMPCO.COM

VENEER

STC37 MC45

02/2013

10

AMPCO ARCHITECTURAL FLUSH WOOD DOOR SPECIFICATIONS

Quality Standards: Conforms to WDMA Industry Standard I.S.-1A, and Arch itectural Woodwork Institute section 9 for type PC5 PC7 or FD 1/ 3, and ASTM E-152, Fire Test of Door Assemblies as performed by Warnock Hersey International. Maximum Size: Single Door: 4/0 x 8/0

Warranty: Two years from date of manufacture. For original installation only. Label Authority: Labeled and classified by Warnock Hersey International as a 20 minute fire /smoke barrier. Restrictions on machining and architectural accessories or application are per that authority.

AMPCO DOORS

LL Wood Veneer LEAD LINED AWI: LL

*Fire labeled doors may not be refit in the field if already factory prefit or machine sized.

Thickness: 1 3/4” (± 1/16”) Frame Components: Stiles: (before trim or prefit) 2” mill option kiln-dried hardwood or stiles to match face veneer species. Bonded to the core. Rails: (before trim or prefit) 2” mill optian kiln-dried hardwood . Bonded to the core. Interior Blocking: Not applicable. Vision Panels: Maximum lite size 20 minute, no more than 1296 sq in. Core: 1/16”- 1/4” thick lead sheet, full width of care, sandwiched and bonded to particleboard and securely fastened with lead bolts. Finish: Available in clear finish only. WDMA-TR-6. Catalyzed Polyurethane and UV cured. Edge banding is finished first, then applied to stiles. Faces: 1/8” - 2 ply or 3 ply hot pressed, cross banded hardwood face veneer meeting AWl or WDMA grading rules as specified. Type II bond between plys as specified. 1/42” face prior to sanding. Running, book match to be provided if nothing is specified. Adhesive: Type I or Type II bond, by specification, between faces and core/frame components. Formulated using no urea formaldehyde.

www.ampco.com • 305.821.5700 ext. 355 • [email protected]

WWW.AMPCO.COM

VENEER

Assembly: 5 ply or 7 ply when using 2 ply or 3 ply hardwood face veneer. Core and frame compartments are bonded and uniformly sanded to a thickness of 1 1/2” (±.015). Core and frame components are assembled to meet or exceed 20 minute specifications. 02/2013

11

AMPCO ARCHITECTURAL FLUSH WOOD DOOR SPECIFICATIONS

Quality Standards: Conforms to WDMA Industry Standard I.S. - 1A and Architectural Woodwork Institute section 9 for FD 1/3, and ASTM E-152, Fire Test of Door Assemblies as performed by Warnock Hersey International. Maximum Size: Single Door: (unrated) 4/0 x 10/0 Single Door: (20 minute) 4/0 X 10/0 Pairs: (unrated) 8/0 X 10/0 Pairs: (20 minute) 8/0 X 10/0, 8/0 X 9/0 or 8/0 X 8/0 Double Egress: 8/0 X 9/0 with concealed vertical rod exit devices. Thickness: 1 3/4” (±1/16”) Frame Components: Stiles: (before trim or prefit) 1 1/4” structural composite lumber (SCL) or 1 1/4” mill option kiln-dried hardwood. Bonded to core. Rails: (before trim or prefit) top and bottom 1¼” structural composite lumber (SCL) or 1¼” mill option kiln-dried hardwood. Bonded to core.

Adhesive: Type I or Type II bond, by specification, between faces and core/frame components. Formulated using no urea formaldehyde.

AMPCO DOORS

AF/AF20 AGRIFIBER CORE AWI: AF-3 OR FD 1/3

Assembly: Bonded core and frame assembly is uniformly sanded to a thickness of 1 1/2“ (+.015”). For FD 1/3, core and frame components are assembled to meet or exceed 20 minute specifications. Warranty: Lifetime from date of manufacture. For original installation only. Label Authority: For FD 1/3, may be labeled and classified by Warnock Hersey International as a 20 minute fire/smoke barrier. Restrictions on machining and architectural accessories or application are per that authority. *Fire labeled doors may not be refit in the field if already factory prefit or machine sized.

Interior Blocking: In some applications the addition of optional solid wood interior blocking may be required due to fire rating and hardware specifications. Core: Wood Agrifiber door core to meet or exceed American National Standard ANSI A208.1 for I-LD-2 Door Core. Mat-formed Agrifiber with density approx. 28-32 pounds per cubic feet (pcf) to meet or exceed Commercial Standard CS 236-66 for Type 1 grade C, Class 1. Exceeds requirements for 20 minute construction authority. Finish: Available in clear finish only. WDMA-TR-6. Catalyzed Polyurethane and UV cured. Edge banding is finished first, then applied to stiles.

www.ampco.com • 305.821.5700 ext. 355 • [email protected]

WWW.AMPCO.COM

VENEER

Faces: 1/8” - 2 ply or 3 ply hot pressed, cross banded hardwood face veneer meeting AWl or WDMA grading rules as specified. Type II bond between plys as specified. 1/42” face prior to sanding. Running, book match to be provided if nothing is specified. 02/2013

12