Shuster’s Building Components Nationally Recognized Independent Millwork Distributor
COMMERCIAL DOOR PRODUCTS LIST PRICE & SPECIFICATIONS MANUAL
INDEX
Page
2 SBC Label Inventory
Section
3 Catalog Ordering Instructions
4 Hollow Metal Door & Steel Lite Kits
5 Hollow Metal Frames: Masonry & Drywall
6 Blank,Blank Slabs; Steel Frame Options & Steel Slab Options 7 Threshold and Frame Components 8 Commercial Wood Doors
9 Commercial Wood Doors & Wood Lite Kits
10 Commercial Hardware and Hinges
11 Von Duprin Hardware & Norton Closers
12 Lawrence Hardware
13 Door Machining Specifications & Lock Prep Specifications 14 Non-Standard Wood Door Machining Worksheet 15 Drywall Frame Installation Instructions
16 Masonry Frame Installation Instructions
17 Adjustable Frame Installation Instructions
18 Commercial Door Handings & Technical Data 19 SBC Quick Price Page
September 2009 v2
“NEUTRAL PRESSURE” LABEL INVENTORY - DOORS & FRAMES
DOOR LABELS
M
fi
DO NOT REMOVE OR COVER THIS LABEL
M
fi
DO NOT REMOVE OR COVER THIS LABEL
M
fi
M
fi
DO NOT REMOVE OR COVER THIS LABEL
DO NOT REMOVE OR COVER THIS LABEL
WARNOCK HERSEY
SHUSTER’S Building Components
LISTED FIRE DOOR 20 MINUTE RATING SAMPLE NOT VALID
Irwin, PA 15642
MIN. LATCH THROW - 1/2 INCH
WARNOCK HERSEY
SHUSTER’S Building Components
LISTED FIRE DOOR 3/4 HOUR RATING SAMPLE NOT VALID
Irwin, PA 15642
MIN. LATCH THROW - 1/2 INCH
WARNOCK HERSEY
SHUSTER’S Building Components
LISTED FIRE DOOR 1 HOUR RATING SAMPLE NOT VALID
Irwin, PA 15642
MIN. LATCH THROW - 1/2 INCH
WARNOCK HERSEY
SHUSTER’S Building Components
LISTED FIRE DOOR 1-1/2 HOUR RATING SAMPLE NOT VALID
Irwin, PA 15642
MIN. LATCH THROW - 1/2 INCH
FRAME LABELS M
fi
DO NOT REMOVE OR COVER THIS LABEL
C
US
WARNOCK HERSEY LISTED FIRE DOOR 20 MINUTE RATING
SAMPLE NOT VALID
FIRE LABEL GUIDELINES
All labeled units assume the rating of the lowest component. Example: A 90 minute wood door in a 20 minute frame would have a 20 minute rating. All labeled doors supplied by Shuster’s Building Components are 1-3/4” thick. All labeled units must have a UL LISTED self closing and UL LISTED positive self latching device. All presizing and machining for hinges, locks and lites must be done at the factory. Any field machining by an unlicensed individual voids the fire label.
SHUSTER’S Building Components Irwin, PA 15642
ARTEK DOOR
IMPORTANT NOTICE
FDF-CDPCF RATING 1-1/2 HOUR..DUREE
The above listed items are only guidelines and do not encompass all laws regarding fire protection. Please consult the National Fire Protection Note: Stamped label is above top hinge on every frame. Association or your local Fire Marshal for specifics regarding labeling rules in your area. Note: All fire doors available as neutral pressure only.
Note: Above is a copy of an embossed label (not actual size).
SBC Commercial Catalog 2009 v2 Page 2
CATALOG ORDERING INSTRUCTIONS “EASY PRICE PROCESS”
EASY PRICE PROCESS STEPS 1.
2. 3. 4.
DESCRIPTION
SELECT DOOR TYPE & SIZE
Steel......................................................................
Wood..................................................................... SELECT FRAME
PAGE 4 PAGE 8
Masonry, Drywall, Wood or Split............................. PAGE 5 SELECT HANDING
PAGE 19
Wire glass or clear tempered................................
PAGE 4
Non rated hardwood lites......................................
PAGE 9
Wood louvers .......................................................
PAGE 9
DO YOU WANT LITES OR LOUVER?
Non rated plastic lite frame..................................... PAGE 4 Metal louvers......................................................... 5. 6. 7.
8.
9.
10.
DO YOU WANT A SILL OR WEATHERSTRIP? WHAT HINGES DO YOU WANT?
DO YOU WANT ANY OTHER HARDWARE?
PAGE 4 PAGE 7
PAGE 10
Lockset.................................................................... PAGE 10 Push/Pulls............................................................... PAGE 10 DO YOU WANT A CLOSER?
Norton.................................................................... PAGE 11 Lawrence............................................................... DO YOU WANT AN EXIT DEVICE?
PAGE 12
Von Duprin............................................................. PAGE 11 Lawrence...............................................................
MISC. HARDWARE NEEDS OR BUILT UP UNIT
PAGE 12
Steel Doors............................................................ PAGE 6 Wood Doors..........................................................
PAGE 9
Surface Bolt or Viewers............................................ PAGE 10 SBC Commercial Catalog 2009 v2 Page 3
COMMERCIAL STEEL DOORS Size 2/0 x 6/8 2/4 x 6/8 2/6 x 6/8 2/8 x 6/8 3/0 x 6/8 3/6 x 6/8 4/0 x 6/8 3/0 x 6/8*
1-3/4” 18 GAUGE EDGE GALVANNEAL DOORS
Style Flush Flush
Flush Flush Flush Flush
Flush 6 Panel
List $485 495 515 515 545 645 685 620
Leadtime 3 Weeks 3 Weeks STOCK STOCK STOCK STOCK STOCK STOCK
Size 2/0 x 7/0 2/4 x 7/0 2/6 x 7/0 2/8 x 7/0 3/0 x 7/0 3/6 x 7/0 4/0 x 7/0 3/0 x 7/0*
Style Flush Flush
Flush Flush Flush Flush
Flush 6 Panel
Cylindrical prep only - All other preps require extended leadtimes.
List $515 520 545 545 580 670 735 655
1
Leadtime 3 Weeks 3 Weeks STOCK STOCK STOCK STOCK STOCK 3 Weeks
Panic reinforced in stock
All doors above, unless noted, are available with cylindrical lock prep or mortise pocket with blank face. Other preps are available but may require extended leadtimes. **Stock doors above have cylindrical lock prep.**
STOCK LITE KITS INSTALLED IN DOORS
Metal kits include wire glass in fire rated or 1/4” clear tempered glass in non-fire rated door.
HM-V HM-NL-3 HM-NL4 HM-NL5 10 X 10 3 X 33 4 X 24 5 X 20
HM-G 16 X 24 18 X 24 22 X 24
Available in “Superlite-W” Wire Glass Available in Clear Tempered Glass
Style V NL3 NL4 NL5 2/6 G 2/8 G 3/0 G
Max. Label
B 90 Min. B 90 Min. B 90 Min. B 90 Min. C 45 M C 45 M C 45 M
Lite Size Wire Clear Glass Tempered Price Price 10 x 10 $270 $180 3 x 33 510 240 4 x 25 408 220 5 x 20 338 210 16 x 24 945 295 18 x 24 945 295 22 x 24 945 295
HM-LV 20 X 12
HM-LVL 24 X 24
HM-4 22 X 36
HM-6 8 X 36
Metal Louvers
Style Max. Label LV LVL
-B 90 M
4
HM-9 HM-12 22 X 64 7.5 X 18.5
Plastic Lip Lites
Lite Size Price
20 x 12 lvr $170 24 x 24 lvr 640
Style HM4 IG* HM6 IG* HM9 IG* HM12 IG*
Max. Label X X X X
Lite Size 22 X 36 8 X 36 22 X 64 7.5 X 18.5
Note the Following: Building code changes DO NOT permit the use of wire glass in school K-12 grades nor in any sporting facilities. In these cases, doors will ship open - no glass. *Plastic lite frame, 1/2” insulated glass. “Superlite-W” Wire glass complies with CPSC 16CFR 1202 CAT IT, Requiring withstanding 400LBS of impact. SBC Commercial Catalog 2009 v2 Page 4
Price $168 150 230 172
COMMERCIAL FRAME SETS
TRADITIONAL STOCK FRAME PRICING 2/6, 2/8, 3/0 3/6, 4/0 single 5/0, 5/4, 6/0
5-3/4” Masonry $212 221 255
x 6/8
5-5/8” Drywall $244 260 280
5-7/8” Drywall
2
$244 260 280
x 7/0 $237 $258 $258 249 279 279 281 295 295 ANCHORS MUST BE ADDED TO ABOVE FRAMES. Steel frames require 4-7/8” strike - sold separately (SEE Page 6). Note: 5-3/4” frame is standard product regardless of masonry block width. Masonry 4” Head.................................................................................................................................. (3/0) $67 (4/0) $86 Masonry Wire Anchors (6) per frame................................................................................................... 48 Wood or Steel Stud Anchors (6) per frame.......................................................................................... 20 Existing Masonry Stud Anchors (8) per frame(consisting of expansion shield bolts and hole plugs) Frame drilled........................................................................................................ 110 Frame not drilled................................................................................................. 80 2/6, 2/8, 3/0 3/6, 4/0 single 5/0, 5/4, 6/0
ADJUSTABLE STOCK FRAME PRICING
2/6, 2/8, 3/0 3/6, 4/0 single 5/0, 5/4, 6/0 2/6, 2/8, 3/0 3/6, 4/0 single 5/0, 5/4, 6/0
4-1/2 - 6” Small $320 340 358 345 365 383
x 6/8 x 7/0
2
5-5/8 - 9” Medium
9 - 13” Large
425 450 475
525 592 625
400 425 450
* Can be used on Masonry or Drywall applications. * Adjustable frames are punched/dimpled on sides of frame for easy installation. * Come with flat head tapcon fastners. (16 on singles) (18 on doubles)
500 567 600
NOTE: All frames have 1-1/2 hour fire rating.
WOOD FRAME PREHUNG OPTIONS
5/4” Primed fingerjoint rabbited jamb w/ NO sill and Q-lon compression weatherstrip; w/ US3-4 ball bearing hinges Single Double Single 3/0 x 7/0 Max
6/0 x 7/0 Max
3-1/4” - 4-9/16” $183 $238 For 20 min label on single 4-5/8” - 6-9/16” 230 297 frames up to 6-9/16” 6-5/8” - 8-9/16” 267 346 For WP 20 min. frames Add for Brickmould 40 49 up to 4-13/16” Rough opening is nominal door size plus 2-1/2 in width and 1-1/2” in height. The rough opening allows for use of OPTIONAL 1/2” high ADA threshold.
Rough Openings
3/0 x 7/0 Max
NOTE: MASONRY ROUGH OPENING IS NOMINAL DOOR SIZE PLUS 4-1/4” IN WIDTH AND 2-1/8” IN HEIGHT. NOTE: DRYWALL ROUGH OPENING IS NOMINAL DOOR SIZE PLUS 2” IN WIDTH AND 1” IN HEIGHT.
SBC Commercial Catalog 2009 v2 Page 5
$10
210
NEW ITEM
2 Double 6/0 x 7/0 Max
N/A
N/A
COMMERCIAL STEEL DOORS
STEEL FRAME OPTIONS & MISCELLANEOUS PARTS Description
Catalog #
List
Comm. door lock edge filler plate
CDLEFP
10
Mortise lock conversation plate 4-7/8” strike plate
Door hinge handing plate Mortise lock edge filler gov’t 86 Dust Proof Strike #570 10B Dust Proof Strike #570 US26D #1672 Coordinator (Primed Black)
Compression Anchor Assembly (Standard)
MLCP
478SFP
DHHP MLEF DS10B DS26D 1672CO
$24
Description
Masonry wire anchors
10
EMA snap in hole plug
1 10 14 14 75
Door silencer (each) Universal steel frame Deadbolt strike filler plate Double Door Strike 26D Double Door Strike 40D
EMA 4” dynabolt
INSTALLATION SERVICES
Built up unit (not welded) Masonry Only Built up/ back weld corners Masonry Only Built up/ face weld and grind frame Reinforce for closer Special hardware locations (not hinges) Reduce frame height Thimble strike
List Price $75 188 300 50 225 113 30
Catalog # List MWA
$8
EMADB
3
EMAHP
1
DS USFA DDSFP DDS26D DDS40D
1 6 4 47 47
Wire Masonry Anchor
Universal Steel Frame Anchor
Service Frame
10
Service
10
List Price
Slab
*Prep for closer *Prep for viewer
Steel astragal installed Steel astragal w/ flushbolt Reduce door height (4” Max) per slab *Prep for exit device rim 22,5510,8810 *Prep for exit device vr 2227, 5530, 8830 *Prep for exit device 88 *Prep for exit device 99 Deadbolt bore (standard location) Deadbolt bore thru push/pull plate
Egress Doors may not have a deadbolt.
$55 38 225 375 225 75 75 335 225 50 60
*Charge applies only if closer/exit device is not purchased at time of order.
Size 2/0 2/6 2/8 3/0 3/2 3/4 3/6 3/8 4/0
Style Flush Flush Flush Flush Flush Flush Flush Flush Flush
Size
BLANK BLANK SLABS 6/8 Cat # Price
Size
23-3/4 x 79-1/8 2068HMFBB $644 23-3/4 x 83-1/8 29-3/4 x 79-1/8 2668HMFBB 644 29-3/4 x 83-1/8 31-3/4 x 79-1/8 2868HMFBB 644 31-3/4 x 83-1/8 35-3/4 x 79-1/8 3068HMFBB 777 35-3/4 x 83-1/8 37-3/4 x 79-1/8 3268HMFBB 777 37-3/4 x 83-1/8 39-3/4 x 79-1/8 3468HMFBB 777 39-3/4 x 83-1/8 41-3/4 x 79-1/8 3668HMFBB 777 41-3/4 x 83-1/8 43-3/4 x 79-1/8 3868HMFBB 888 43-3/4 x 83-1/8 47-3/4 x 79-1/8 4068HMFBB 888 47-3/4 x 83-1/8 Machine to any hinge/strike locations..................Add $400 SBC Commercial Catalog 2009 v2 Page 6
7/0 Cat #
2070HMFBB 2670HMFBB 2870HMFBB 3070HMFBB 3270HMFBB 3470HMFBB 3670HMFBB 3870HMFBB 4070HMFBB
Price $664 664 664 790 790 790 790 908 908
COMMERCIAL FRAME COMPONENTS
WEATHERSTRIP, THRESHOLDS & FRAME COMPONENTS
Description 2/6 Barrier free threshold 4", #424 2/8 Barrier free threshold 4", #424 3/0 Barrier free threshold 4", #424 3/0 Barrier free 5", #S282A 3/6 Barrier free 5", #S282A 6/0 Barrier free 5", #S282A
Catalog # 26B424 28B424 30B424 30S282A 36S282A 60S282A
ASTRAGAL CROSS SECTIONS
List $33 36 40 80 92 152
Description 3/0 Barrier free threshold 6", #426 6/0 Barrier free threshold 6", #426 3070 Commercial weatherstrip set 6070 Commercial weatherstrip set 3/0 Commercial door sweep 4/0 Commercial door sweep 140 PA Astragal set
TRADITIONAL MASONRY Catalog #
Description
3/0 Commercial head jamb 5-3/4" 3/0 4” Commercial head jamb 5-3/4" Commercial hinge jamb LH 5-3/4" Commercial strike jamb LH 5-3/4" Commercial hinge jamb RH 5-3/4" Commercial strike jamb RH 5-3/4"
30CHJ 30CHJ4 68CHJL 68CSJL 68CHJR 68CSJR
DRYWALL
3/0 DW head jamb 5-5/8" Commercial DW hinge jamb LH 5-5/8" Commercial DW strike jamb LH 5-5/8" Commercial DW hinge jamb RH 5-5/8" Commercial DW strike jamb RH 5-5/8" 3/0 DW head jamb 5-7/8" Commercial DW hinge jamb LH 5-7/8" Commercial DW strike jamb LH 5-7/8" Commercial DW hinge jamb RH 5-7/8" Commercial DW strike jamb RH 5-7/8"
30DWHJ558 68CDWHJL558 68CDWSJL558 68CDWHJR558 68CDWSJR558 30DWJ 68CDWHJL 68CDWSJL 68CDWHJR 68CDWSJR
3/0 SPLIT head jamb SMALL (4-1/2” - 6”) Commercial SPLIT hinge jamb LH SMALL Commercial SPLIT strike jamb LH SMALL Commercial SPLIT hinge jamb RH SMALL CommercialSPLIT strike jamb RH SMALL 3/0 SPLIT head jamb MEDIUM (5-5/8” - 9”) Commercial SPLIT hinge jamb LH MEDIUM Commercial SPLIT strike jamb LH MEDIUM Commercial SPLIT hinge jamb RH MEDIUM CommercialSPLIT strike jamb RH MEDIUM 3/0 SPLIT head jamb LARGE (9 - 13”) Commercial SPLIT hinge jamb LH LARGE Commercial SPLIT strike jamb LH LARGE Commercial SPLIT hinge jamb RH LARGE CommercialSPLIT strike jamb RH LARGE
30CSHJSM 68CSHJLSM 68CSSJLSM 68CSHJRSM 68CSSJRSM 30CSHJMED 68CSHJLMED 68CSSJLMED 68CSHJRMED 68CSSJRMED 30CSHJLG 68CSHJLLG 68CSSJLLG 68CSHJRLG 68CSSJRLG
SPLIT
SBC Commercial Catalog 2009 v2 Page 7
Z ASTRAGAL
6/8 List
$46 67 90 76 90 76 48 104 92 104 92 48 104 92 104 92 68 134 118 134 118 84 168 148 168 148 105 210 185 210 185
5
Catalog # 30B426 60B426 3070CWS 6070CWS 30CDS 40CDS 140PA70A
List $72 144 36 44 16 22 300
z
Catalog # --
7/0 List
70CHJL 70CSJL 70CHJR 70CSJR
$102 89 102 89
70CDWHJL558 70CDWSJL558 70CDWHJR558 70CDWSJR558
111 99 111 99
70CSHJLSM 70CSSJLSM 70CSHJRSM 70CSSJRSM
149 128 149 128
70CSHJLLG 70CSSJLLG 70CSHJRLG 70CSSJRLG
225 195 225 195
70CDWHJL 70CDWSJL 70CDWHJR 70CDWSJR
70CSHJLMED 70CSSJLMED 70CSHJRMED 70CSSJRMED
--
111 99 111 99
182 159 185 159
COMMERCIAL WOOD DOORS
Size/Species 2/0 2/4 2/6 2/8 2/10 3/0 3/4 3/6 4/0 2/0 2/4 2/6 2/8 2/10 3/0 3/6 4/0 2/0 2/4 2/6 2/8 2/10 3/0 3/6 4/0 2/0 2/4 2/6 2/8 2/10 3/0 3/6 4/0
2/0 2/4 2/6 2/8 2/10 3/0 2/6 2/8 3/0 3/6
*=call for pricing
Particle Core 6/8
WOOD DOOR SLAB OPTIONS
Particle Core 7/0
Particle 20 Min. 20 Min. 90 Min. 90 Min. Core 8/0 6/8 7/0 6/8 7/0 1-3/4” BIRCH 152 171 * 191 206 * * 166 183 * 180 193 551 555 166 184 * 180 193 551 555 171 191 * 185 198 565 577 183 200 248 194 208 597 611 183 202 248 194 208 597 611 301 301 * 312 329 817 863 262 301 * 312 329 817 863 262 301 322 319 337 839 869 1-3/4” OAK 161 174 * 200 215 * * 177 191 * 191 205 662 691 177 198 * 191 205 662 691 199 211 * 203 217 569 593 205 219 290 211 225 597 622 205 219 290 211 225 597 622 294 304 * 347 263 862 907 294 313 354 354 374 892 929 1-3/4” PR HARDBOARD 137 150 * 154 164 * * 123 164 * 158 175 654 698 123 164 * 158 175 654 698 128 167 * 164 181 659 703 133 174 * 171 187 666 710 133 174 * 171 187 666 710 256 274 * 269 287 715 758 261 282 * 277 299 735 779 1-3/4” IMPERIAL OAK 165 181 * 178 195 * * 144 186 * 182 199 691 725 144 186 * 182 199 691 725 148 188 * 185 202 695 738 153 198 * 196 213 705 749 153 198 * 196 213 705 749 316 333 * 330 346 802 846 322 389 * 338 358 826 869 1-3/4” PRIMED MOULDED (NO COMMERCIAL HARDWARE) 200 248 * 213 261 * * 649 680 220 255 * 233 268 649 680 220 255 * 233 268 654 687 227 258 * 241 271 663 697 232 263 * 248 277 663 697 232 263 * 277 248 1-3/4” COMMERCIAL 6 PANEL SMOOTH (WIDE STYLE & RAIL) 700 732 313 328 * 327 343 705 736 316 332 * 332 348 715 746 320 336 * 336 354 874 905 395 421 * 409 436
=Available in Regency Walnut or Imperial Oak (Specify) No special widths -must use 2-3/8” backset. =1-3/4” 6 Panel Textured Only
=60 min. Only (90 min. N/A) NOTE: ADD
= 1 week leadtime.
20% FOR NON-STOCK ITEMS 5 OF SIZE & KIND
WHEN ORDERING LESS THAN
H.C 6/8
1
117 125 125 130 132 132 194 194 227 139 130 130 134 138 138 267 278 93 99 99 102 106 106 167 176 90 99 99 103 109 109 165 179 116 121 121 126 129 129 229 238 248 276
Notes: 1. All unshaded doors 2-3 week leadtime. 2. All 1-3/4” fire doors are pe-fit 3/16” in width and 7/8” in height and machined for 1-1/2 pair hinges and cylindrical lock. 3. For pairs of doors, double single door price and add $50 for wood astragal. (For metal astragal, Add $225-fire doors) 4. For FB3 Flush Bolt, ADD $50 each.
SBC Commercial Catalog 2009 V1 Page 8
H.C 7/0 143 138 138 142 145 145 206 206 239 152 141 141 145 150 150 281 290 108 114 114 117 120 120 182 193 114 122 122 127 133 133 189 209 173 181 181 185 190 190 273 277 292 320
COMMERCIAL WOOD DOORS
WOOD DOOR ADD-ONS
Lock prep 3C, 6C, 8C, 9C
T= TEMPLATE REQUIRED BY CUSTOMER N/C
86C mortise pocket Gov’t 86
36
Mortise lock with function
60
Flush Bolt #557 prep
100
Double lock 667, 337, 867, 937
29
Special double cylindrical lock prep Prep for viewer
T
80C w/ thrubolt holes
CWS 41
CWS 300 CWS 104F CWS9 IG
10” X 10”
20” X 12”
24” X36”
4”X 24”
IG glass supplied by SBC
20” X 64”
Call Office 38
Non-fire rated flush doors reduce in height or width
CWS 109F
10
77 (per panel) 9
CWS9 O
CWS 17
CWS 400
20” x 64”
20” x 24”
10” x 40”
Open for 1/4” glass supplied by others
LITE KITS INSTALLED IN DOORS SEE PAGE 4
NON-FIRE RATED HARDWOOD LITES
Description
WITH 1/8” TEMPERED GLASS
CWS-109F (10” x 10”)
48
Description
CWS-9 IG 20” x 64” insulated
450
CWS-17 (20” x 24”)
116
CWS-41 (20” x 12” louver)
144
CWS-9 IG 20” x 64” O open (for 1/4” glass)
3/0 & up CWS-300 (24” x 36”)
250
Special size cut-out w/ hardwood bead
2/6 x 2/8 CWS-300 (20” x 36”) CWS-104 (4” x 24”) CWS-400 10” x 40”
152 56
117
4
Special Lite location
Special Louver location
IF USING STEEL LITE FRAME, REFER TO PAGE 4 FOR STEEL LITE KITS. SBC Commercial Catalog 2009 v2 Page 9
245 300 48
48
T
T
STOCK LOCKSETS, HINGES & HARDWARE Lever
Ball
LAWRENCE LOCKSETS
LEVER (-L) FINISH DESCRIPTION US3 US10B Entrance LH5304 (-L or -B) $120 $120 Passage LH5301 (-L or -B) 115 115 Privacy LH5322 (-L or -B) 117 117 Classroom LH5305 (-L or -B) 120 120 Store Room LH5307 (-L or -B) 120 120 Half Dummy LH5300 (-L or -B) 75 75 *Locksets come with Schlage Type C Keyway Key charge for any lockset....Add $28.00 2-3/8” Backset (238CBS)....Add $9.00 DESCRIPTION
HINGES
4-1/2” X 4-1/2” 1279 Plain Bearing 4-1/2” X 4-1/2” 1279 Plain Bearing NRP 4-1/2” X 4-1/2” 1279 Ball Bearing 4-1/2” X 4-1/2” 1279 Ball Bearing NRP 4-1/2” X 4-1/2” 1250 Spring
US3 11 14 18 20 26
HARDWARE
DESCRIPTION
#70 Push Plate #110 x 70 Pull & Plate 6 x 28” Kick Plate 6 x 30” Kick Plate 6 x 34” Kick Plate #555 12” Flushbolt #557 Flushbolt #43 - 36” Push/Pull*
*Item to be discontinued when stock is depleted.
US3 39 180 36 40 46 N/A N/A N/A
US26D $115 110 112 115 115 68
7
USP 11 14 18 20 26
US28 22 66 36 40 46 42 63 330
Push & Pull Bar
Pull Plate
For deadbolt bore thru push & pull add: $60
VIEWERS 10
U-700 US4 or US26D (standard location) (Non-standard location) Prep Only Standard location from floor 61”
70 90 38
US26D $100 95 97 100 100 45
6
FINISH US10 US26D 11 11 14 14 18 18 20 20 26 26 FINISH US10 42 186 114 126 136 42 63 N/A
US3 $110 105 107 110 110 50
BALL (-B) FINISH US10B $110 105 107 110 110 50
7
#453 Surface Bolts- installed Installed top and bottom w/ thru bolts. Can be used on inactive door of pair of double doors.
Note: Must specify with or without sill for location of bottom bolt.
US10 US26D #453 x 8” (set of 2) 120 120
SBC Commercial Catalog 2009 v2 Page 10
Push Plate
STOCK CLOSERS & PANIC HARDWARE
VON DUPRIN HARDWARE
Lever 88L
22EO 22K 22L
Exit Only
Knob Trim
Lever Trim
22TP
Thumb Piece Trim
2227
Vertical Rod K
2227 2227 2227
Key Unlocks Knob 22K
Key Unlocks Lever 22L
SP28
SP313
991
991
$640 984 954
$640
88EO
984 954
1795
1580
Exit Only
8827
Vertical Rod L
1440
1440
99L
1410
1600
Thumb Piece Trim
99EO
1410
US26D
88TP
88NL
1099
Vertical Rod TP
US4
$1414
1099
1446
Key Locks Thumbpiece 22TP
Exit Only
Vertical Rod EO
1446
9
Night Latch
Vertical Rod DT
99TP
Thumb Piece Trim
88L
Lever Trim
Lever Trim
Fire Rated Von Duprin 22...............................................$260
2136 2004 2308 1650 1670
$1710 2004 2512 N/A N/A N/A
2094
For labeled wood door units and labeled 20 guage reinforced hollow metal door units, price included: sex bolts installed and #D951 rim cylinder piece device.
High Traffic Type 88 Active or Inactive
High Traffic Type 99 Active Door
Low Traffic Type 227 Active or Inactive FINISH #
FINISH
SP28 ALUMINUM SP313B BRONZE US4 DULL BRASS US26D DULL CHROME
Norton 1600 Closer
Low Traffic Type 22
CLOSER
Norton Closer 1601 1601 H
1601 BF
SBC Commercial Catalog 2009 v2 Page 11
1601 HBF
8
Sprayed Sprayed Alum. Bronze 312
312
312
312
312 360
312 360
STOCK LAWRENCE HARDWARE
LAWRENCE HARDWARE
Low Traffic Type 5530 Active or Inactive
It is recommended that vertical rod panic devices be used on all pairs of egress doors.
Low Traffic Type 5510
FINISH #
High Traffic Type 8830 Active or Inactive
US3 US10B US32D 626 628 630
High Traffic Type 8810
Note: Must use high traffic exits with high traffic trim and low traffic exits with low traffic trims.
HIGH TRAFFIC DEVICES EXIT
DESCRIPTION
US3 US10B
626
8810S-RD
$670
$670
$600 Key in entrance w/ esc LO1A
Rim, fire rated
8810F-ND
770
770
700
Surface vert rod, fire rated Rim, non-fire rated
8830S-RD 8830F-ND
870 920
8810F-ND-48 870
Surface vert rod, non-fire rated 8830F-ND-48 970
DESCRIPTION
870 920 870
628 5510S-RD $350 Rim, non-fire rated 5530S-RD 440 Surface vert rod, non-fire rated 5510F-ND 500 Rim, fire rated 5530F-ND 600 Surface vert rod, fire rated 5510F-ND-48 480 Rim, non-fire rated Surface vert rod, non-fire rated 5530F-ND-48 520
*Key charge for any trim device....Add $28.00 DESCRIPTION
CLOSERS
Standard Closer 825 Closer Hold open arm c825
High Traffic Closer Hold open arm 8106 Parallel arm drop plate Cushion arm stop
$180 200 45
HIGH TRAFFIC
8106 ARM41 DPPA35 CSA40
250 60 40 40
STAINLESS ALUMINUM
STAINLESS
9
US3 US10B US32D N/A
N/A
$200
190
190
SF804 $190
$190
850
Key in lever passage
SF801
170
900
Key in lever store room SF807
190
Key in lever dummy
N/A
DESCRIPTION
Key in entrance w/ esc Key in lever entrance Key in lever store room Key in lever passage Key in lever dummy
170
F800
TRIM
US32D LO1A $200 S804 N/A S807 N/A S801 N/A F800 N/A
170
N/A
9
190 N/A
L01A
630 N/A $180 180 160 160
SF Series
8
LOW TRAFFIC ALUM Bronze
5036 825 ARM41-825
STAINLESS
Key in lever entrance
LOW TRAFFIC DEVICES EXIT
BRONZE
800 800
970
BRASS
TRIM
DESCRIPTION
Rim, non-fire rated
Surface vert rod, non-fire rated
FINISH
$180 200 45 250 N/A N/A N/A
*Locksets come with Schlage Type C Keyway
MISC.
DESCRIPTION
Plated arm & cover for 8106 Closer
SBC Commercial Catalog 2009 v2 Page 12
US3
US26
$250 $250
MACHINING LOCATIONS- Lock Preps Revised 3-09
DR 16
Steelcraft
DR 17
CECO
DR 18 DR 19
CECO Fenestra
DR 23
Mesker
DR 20
Fenestra
DR 24
Mesker
DR 25
Republic
DR 27
DR 31
Amweld or ARTEK Amweld or ARTEK Builders/or Pioneer Builders/or Pioneer Curries
DR 33
Dittco
DR 26
Republic
DR 28 DR 29 DR 30 DR 32
Curries
DR 34 DR 39
Dittco Timely
DR 43 DR 44
Redi Frame Redi Frame
DR 46
Fleming
DR 40 DR 45
Specification Lock Preps Prep #3 C Prep #3 HM Prep #6 C Prep #6 HM Prep #8 C Prep #9 C Prep #80 C Prep #21 C Prep #22 C Prep #23 C Prep #24 C Prep #25 C Prep #30 C Prep #31 C Prep #33 C Prep #34 C Prep #35 C Prep #36 C Prep #86 C Prep #666 C Prep #667 C Prep #337 C Prep #867 C Prep #937 C
1-3/4”
80” 80”
7/0
1 1-3/4” 1-3/4” 1-3/4” 1-3/4” 1-3/4” 1-3/4” 1-3/4”
7/0
1-3/4”
6/8 7/0 6/8 7/0 6/8 7/0 6/8 7/0 6/8 6/8 6/8 7/0 6/8 7/0 6/8 7/0 6/8
Timely
Fleming
7/0 6/8 7/0 6/8 7/0
Backset 2-3/8” 2-3/8” 2-3/4” 2-3/4” 2-3/4” 2-3/8” 2-3/4”
Prep Prep Prep Prep
Prep Prep Prep Prep Prep Prep Prep Prep #6 C Prep #6 C Prep # 3 C Prep #8 C Prep #9 C
1
-3/4” -3/4”
3/4”
1/8”
79 83-1/8” 79-1/8” 83-1/8” 79-1/8” 83-1/8” 79-1/8” 83-1/8”
84”
1/8”
83-1/8”
84”
1/8”
84” 84” 80” 84” 80” 84” 80” 84”
1 1
-3/4”
1
-3/4”
80”
1-3/4”
80”
1
1-3/4” 1-3/4” 1-3/4” 1-3/4” 1 1-3/4” 1-3/4” 1-3/4” -3/4”
80” 80”
84” 84”
80-3/16” 84-3/16
80-3/16” 84-3/16 80” 84”
Latch Face Height
1/8” 1/8” 1/8” 1/8” 1/8” 1/8” 1/8” 1/8” 1/8” 1/8” 1/8” 1/8” 1/8” 1/8” 1/8” 1/8” 1/8” 1/8” 1/8” 1/8”
83
-1/8” -1/8”
3/16”
37 39-5/8” 35-1/8” 37-1/8” 35-1/8” 37-1/8” 37-5/16” 39-5/16”
68 72-5/8” 65-1/8” 69-1/8” 65-3/8” 69-3/8” 67-1/4” 69-1/4”
3/4”
.134
3/16”
7-3/8”
5/8”
.134
1/4”
3/4” 3/4” 3/4” 3/4” 3/4” 3/4” 3/4”
79
-1/4”
5/8”
79-1/4”
3/4”
83-1/8” 79 831/8” 79-1/8” 83-1/8” -1/8”
3/4” 5/8”
5/8” 3/4”
13/16” 13/16”
.134 .134 .134 .134 .134 .134 .134 .134 .134 .134
.134 .134 .134
1/4” 1/4” 1/4” 1/4” 1/4” 1/4” 1/4”
1/4” 1/4” 1/4”
5/16”
.134
1/4”
.134 .134
13/16”
3/4”
.134
3/4”
1/4”
.134
.134 .134
13/16”
1/4”
.134
7
-3/8” -5/8”
7
-3/8”
4
-7/8”
4
-7/8”
4
-7/8”
4-7/8” 4-7/8”
39
37
-5/16” -5/8”
-5/16”
39-5/16” 35
-1/8”
35
-1/8”
37
-1/8”
37-1/8” 35-1/8”
71
-1/4” -5/8”
67
-1/4”
65
-3/8”
65
-3/8”
71-1/4” 69
-3/8”
69-3/8”
1/4” 1/4” 1/4” 1/4”
8 8-316” 7-3/8” 7-3/8”
37 39-11/16” 37-5/16” 39-5/16”
67-3/16” 71-3/16” 67-1/4” 71-1/4”
LOCK PREP SPECIFICATION
43-9/16” 41
-7/8”
39
-7/8”
45
Latch Face Width
43-7/8”
43-9/16”” 40” 40” 44” 39-9/16”” 43-9/16””
Corner Face bore Edge Hole Strike Height Conditions Square 1” 2-1/4” 11/8” 2-1/8” 47/8” Square 1” 2-1/4” 11/8” 2-1/8” 23/4” Square 1” 2-1/4” 11/8” 2-1/8” 47/8” Square 1” 2-1/4” 11/8” 2-1/8” 23/4” Square 1” 2-1/4” 11/8” 15/8” 23/4” Square 1” Thmbl. Strk 2-1/4” 11/8” 15/8” Square 1” 2-1/4” 11/8” 21/8” 47/8” Note Prep 80C includes thrubolt holes. Please supply lock template. For 88TP Panic Device For 88NL Panic Device For 88EO Panic Device For 8827 Panic Device No lock preparation Except edge prep on Door w/ Filler Plates For 99EO-F Panic Device For 99TP-F Panic Device 22K Panic Device For 22EO Panic Device For 2227 Panic Device For 22TP Panic Device Std. Gov’t 86 Mortise Pocket Only (No Function Holes) Over Prep #6 C 6” Centerline + (Steel Doors Only) Over Prep #6 C 7-11/16” Centerline + Over Prep #3 C 7-11/16” Centerline + Over Prep #6 C 7-11/16” Centerline + Over Prep #3 C 7-11/16” Centerline +
+THIMBLE STRIKE USED AT DEADBOLT LOCATION ON THIS PREP SBC Commercial Catalog 2009 v2 Page 13
-7/8”
44”
69-3/8” 67-3/16”
-11/16”
39
-9/16”
71-3/16”
37-1/8” 37-11/16” 39-11/16”
38 42 -1/6” 39-9/16” 43-9/16” 39-9/16” 43-9/16” 39-9/16” 43-9/16” -1/16”
39-9/16””
4-7/8” 8-316” -316”
43
-9/16”
65-3/8”
5/16” 1/4”
8-316”
39-9/16”
0 3 BEVEL
NOMINAL HINGE SIDE CLEARANCE
NOMINAL STRIKE SIDE CLEARANCE
TOP OF DOOR/ TOP OF 3RD HINGE
.134
1/4”
6 6-5/8” 5-1/8” 5-1/8” 4-7/8” 4-7/8” 7-3/8” 9-3/8”
3/4”
79
83-1/4” 79-1/8”
TOP OF DOOR/ TOP OF 2ND HINGE
67-1/4”
-1/8”
83-1/8”
TOP OF DOOR/ TOP OF 1ST HINGE
37-5/16”
79
83
HINGE BACKSET ON DOOR
7-3/8”
-1/8”
-1/4”
MORTISE DEPTH FOR HINGE
STANDARD UNDERCUT/RUG CLEARANCE 3/4”
-3/4”
-3/4”
ACTUAL DOOR HEIGHT
79-1/8”
1/8”
DOOR UNDERSIZING IN WIDTH
Steelcraft
TOP OF DOOR TO CENTERLINE OF LOCATION (A115.2)
DR 15
HEAD CLEARANCES
DOOR PREP NUMBER
FRAME OPENING HEIGHT
STANDARD WOOD DOOR MACHINING LOCATIONS
3/16”
1/8”
1/16”
x
3/16”
1/8”
1/16”
x
3/16” 3/16” 3/16” 3/16” 3/16” 3/16” 3/16” 3/16” 3/16”
1/8” 1/8” 1/8” 1/8” 1/8” 1/8” 1/8” 1/8” 1/8”
1/16” 1/16” 1/16” 1/16” 1/16” 1/16” 1/16” 1/16” 1/16”
3/16”
1/8”
1/16”
3/16”
1/8”
1/16”
3/16” 3/16” 3/16” 3/16” 3/16” 3/16” 3/16” 3/16” 3/16” 3/16” 3/16”
Strike Bore 1” 1” 1” 1” 1” 1” 1”
1/8” 1/8” 1/8” 1/8” 1/8” 1/8” 1/8” 1/8” 1/8” 1/8” 1/8”
x x x x x x x x x x
1/16”
x
1/16”
x
1/16” 1/16” 1/16” 1/16” 1/16” 1/16” 1/16” 1/16” 1/16”
x x x x x x x x x x
Corner Conditions Square Square Square Square Square Square Square
SBC Commercial Catalog 2009 v2 Page 14
INSTALLATION INSTRUCTIONS
SBC Commercial Catalog 2009 v2 Page 15
INSTALLATION INSTRUCTIONS
SBC Commercial Catalog 2009 v2 Page 16
INSTALLATION INSTRUCTIONS
SBC Commercial Catalog 2009 v2 Page 17
COMMERCIAL DOOR HANDING
3
(LHRA)
(RHRA)
Polystrene Core
1-3/4” polystrene composite construction. All reinforcing boxes contain polystyrene. Flat or 6 panel embossed surface. R factor: 7.0 STC 26 in 20 gauge material.
SBC Commercial Catalog 2009 v2 Page 18
SBC QUICK PRICE PAGE MASONRY
6 PANEL
FLUSH
3/0 x 6/8
Units Include: 16 gauge galvaneel 90 min frame (assembled) 18 gauge galvaneel 90 min slab (3) ea. 4-1/4” x 4-1/2” plain bearing hinges Reinforced for closer (door and frame) Closed top channel on outswing units Left or right hand (must specify) 161 or government 86 edge prep (3) Door silencers Anchors sold separately
7/0
6/8 1,032
5-3/4” 957 1,017
Add 4” Head: $21
DRYWALL
6 PANEL
FLUSH
3/0 x 6/8 5-5/8” 822 5-7/8” 822
Units Include: 16 gauge galvaneel 90 min frame (KD) 18 gauge galvaneel 90 min slab (3) ea. 4-1/4” x 4-1/2” plain bearing hinges Reinforced for closer (door and frame) Closed top channel on outswing units Left or right hand (must specify) 161 or government 86 edge prep (anchors sold separately.
(3) Door silencers
6/8 897 897
7/0 871 871
STEEL FRAME-WOOD 20 MIN DOORS OAK
DRYWALL
3/0 x 6/8
5-5/8” 509 5-7/8” 509
MASONRY
5-3/4”
644
7/0 537 537 683
Add 4” Head: $21
BIRCH
6/8 492 492
627
7/0 520 520
666
IMPERIAL OAK
6/8 494 494
629
7/0 525 525
Units Include: 16 gauge galvanized frame (KD) 20 minute wood rated slab 90 minute Warnock Hersey rated frame Prep for 161 lock (3) ea. 4-1/2” x 4-1/2” ball bearing hinges Left or right hand (must specify) (3) Door silencers Anchors sold separately
671
SBC Commercial Catalog 2009 v2 Page 19
Note: Masonry frame unit is built up and includes ADA sill, sweep and compression weather strip (anchors sold separately).
SHUSTERʼS Building Components “GALVANNEAL” steel provides superior durability and protection against rust in Artek Doors and Frames What is “GALVANNEAL”? It is steel with a matte-gray “galvanneal” coating applied by the steel producer to both sides of the sheet, “suitable for immediate painting without further treatment except normal cleaning.” Why use “GALVANNEAL”? To provide superior and inexpensive protection against rust. To eliminate the need for costly touch-up prior to finish painting. To eliminate the need for costly packaging from the factory. Where to use “GALVANNEAL”? Common interior and exterior environments in residential, commercial and industrial construction. “GALVANNEAL” provides an excellent base for finish painting. Surface must be clean and dry, if required, to clean surface oils and grease use ZYLOL or TULUOL. Paint locally or on site according to the application, local conditions and paint specifications. For most interior and exterior applications, directly apply an alkyd or acrylic latex paint in semi or gloss finish. Primer is not required. Do not use chemical pretreatments or mineral spirits.
Is “GALVANNEAL” the same as Galvanize? No. “Galvanneal” is a zinc-iron alloy coating. Galvanize is a bright zinc coating with a multifacteted crystal structure. “Galvanneal” is provided at no charge. Galvanize is an optional extra. Are there other names for “GALVANNEAL”? Yes. “Satincoat”, “Wipecoat” and “Galvanneal” are synonymous. Product storage Do not allow moisture or liquid of any kind to remain on or trapped between surfaces. Store Artek products off the ground and in covered, dry places. Inspect stored products regularly. If moisture is present, dry immediately. Technical Bits The specification to which the steel is manufactured is: ASTM A653/653M - Standard Specifications for Steel Sheet, Zinc Coated (Galvanized) or ZincIron Alloy Coated (Galvanneal) by the Hot-Dip process. Arteks standard grade of steel is “Commercial Steel (CS) type B” with the coating designation A40 having a minimum thickness of .40 oz/ft2, total both sides (metric equivalent is ZF120 with 120g/m2).
Why coat steel with Zinc? It is the least expensive way of protecting steel against corrosion. Zinc, with it’s very low corrosion rate, shields the steel against most common environments, for as long as the zinc lasts. This material may not be reproduced in its entirety or in part, in any form whatsoever. Prices and specifications subject to change without notice.
SHUSTER’S BUILDING COMPONENTS
2920 Clay Pike • Irwin, PA 15642-3098 724-446-7000 • 412-351-0979 • Fax # 800-676-0640 www.shusters.com
Door and Hardware Institute
Warnock Hersey
C
US
Shuster’s Building Components Irwin, PA 15642 (Phone) 800-735-9899 (Email)
[email protected] (website) www.shusters.com
CANADIAN STEEL DOOR MANUFACTURERS ASSOCIATION