Rancho Shock Spec 4/12/05 2:37 PM Page 187

Specifications

SHOCK SPECIFICATIONS

EYE UPPER & LOWER MOUNTING

LENGTH

LENGTH

STUD UPPER & EYE LOWER MOUNTING

LENGTH

STUD UPPER & LOWER MOUNTING

CLOSE (C)

OPEN (O)

STEM MOUNTING CODES

“A”

CROSS-PIN MOUNTING CODES

“B”

CODE XP1 XP4 XP5 XP7 XP8 XP12

END O C C C O O

A 5/16 5/16 5/16 5/16 5/16 3/8

CODE S12 S15 S33 S34 S42 S51 S52 S62

B 2 - 3/16 2 - 7/16 2 - 1/2 2 - 7/8 3 3 - 3/16

BUSHING MOUNTING CODES

A 1 - 3/16 2 - 5/8 2 2 - 1/4 2 - 3/8 2 - 5/8 2 - 5/8 2 - 1/2

BUSHING & SLEEVE MOUNTING CODES

“B”

“A”

“B”

“A” CODE L1 L2 L3

Threads M10 10MM 3/8 - 24 3/8 - 24 3/8 - 16 1/2 - 13 1/2 - 20 5/8 - 18

A 5/8 11/16 3/4

B 1 - 5/16 1 - 9/16 1 - 9/16

Many shocks come with a parts package containing mounting hardware to reduce 5/8≤ rubber bushing eye to 9/16≤ or 1/2≤ allowing for multiple vehicle applications. All mounting code dimensions are approximate and subject to change without notice. RS5000 shocks are 1 3/8≤ Bore and RS5600 shocks are 1 3/16≤ Bore.

Rancho only engineers its shock absorbers for the applications listed in this catalog. Misapplication of Rancho shock absorbers will result in reduced handling and braking ability.

CODE LS12 LS21 LS23 LS24 LS25 LS26 LS28 LS29 LS30 LS35 LS36 LS37 LS38 LS39 LS40 LS41 LS42

A 7/16 12MM 12MM 12MM 12MM 12MM 12MM 12MM 12MM 18MM 1/2 1/2 1/2 1/2 1/2 1/2 14MM

B 1 - 1/4 1 1 - 1/4 1 - 3/8 1 - 7/16 1 - 1/2 1 - 5/8 1 - 3/4 1 - 7/8 3 - 1/4 1 - 5/16 1 - 3/8 1 - 1/2 1 - 5/8 1 - 11/16 2 - 1/4 1 - 5/16

CODE LS43 LS44 LS47 LS5 LS51 LS52 LS53 LS70 LS74 LS77 LS78 LS82 LS91 LS92 LS93 LS94 LS95

A 14MM 14MM 9/16 10MM 5/8 / 16MM 5/8 / 16MM 5/8 / 16MM 3/4 12MM 1/2 9/16 5/8 / 16MM 14MM 14MM 18MM 5/8 / 16MM 20MM

B 1 - 9/16 1 - 7/8 1 - 5/8 1 - 7/16 1 - 9/16 1 - 11/16 2 2 - 1/4 1 - 11/16 2 - 7/16 1 - 1/2 1 - 1/2 1 - 3/4 1 - 11/16 3 - 1/4 2 - 3/4 2 - 3/8

187

Rancho Specs listing 4/13/05 11:32 AM Page 188

All listed specifications are for convenience only and are subject to change without notice. Specifications are not intended for design of custom applications.

Specifications NOTE:

Internal extension bumper may reduce perceived extended length by 1/2". Extended and collapsed length dimensions shown for RS5000 shocks, others may vary slightly.

PART NO.

MOUNTING CODES UPPER LOWER

LENGTHS COMP. EXT.

TRAV.

DUST SHIELD

PARTS PACK

NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE

NONE NONE P915, P1057 NONE P915, P1057 P1134 P915, P920, P1057 P915, P934 Two P1134 P1135 P1135 P915, P1013 P915, P1013 P1013, P1134 P1134 P1134 P1357 P1357 P1357 NONE NONE NONE NONE NONE P916 P939 P910, P1134 P916 P910, P1134 P912, P915, P1013 P916, P925 P915, P953 NONE NONE P920 P920 P1136 NONE NONE Two P911 P915, P934 Two P1135 P910, P1134 P1135 P864, P1135 P120 NONE P119 P119 P1134 P1134 NONE NONE NONE NONE P1135 NONE

RANCHO RS5000 Shock Absorber RS5001 RS5005 RS5006 RS5007 RS5008 RS5009 RS5010 RS5012 RS5014 RS5017 RS5029 RS5034 RS5036 RS5039 RS5040 RS5041 RS5042 RS5043 RS5044 RS5045 RS5046 RS5047 RS5111 RS5112 RS5113 RS5114 RS5115 RS5116 RS5117 RS5118 RS5119 RS5120 RS5123 RS5124 RS5125 RS5126 RS5128 RS5129 RS5131 RS5132 RS5134 RS5135 RS5136 RS5138 RS5139 RS5140 RS5141 RS5143 RS5144 RS5145 RS5146 RS5147 RS5150 RS5151 RS5152 RS5154 RS5155 c

188

LS41 LS39 L1 L1 L1 S42 L1 L1 S42 S42 S42 L1 L1 S42 S42 S42 S51 S51 S51 L1 L1 L1 L1 L1 L1 L2 S42 L1 S42 L1 L1 L1 LS39 XP7 L1 L1 S42 XP12 LS41 L1 L1 S42 S42 S42 S42 L3 L1 L3 L3 S42 S42 LS74 LS77 LS41 LS77 S42 LS28

LS37 L2 L1 LS26 L1 LS38 L1 L1 S42 LS38 LS26 L1 L1 L1 LS12 LS12 LS47 LS47 LS47 LS26 LS26 LS26 L1 L1 L1 L2 L1 L1 L1 L1 L1 LS36 LS39 LS47 LS26 LS26 XP4 L1 LS37 L1 L1 S42 L1 LS26 LS26 LS38 L1 L3 L3 LS82 XP5 LS74 LS39 LS37 LS39 XP4 LS26

13.250 17.250 11.750 14.875 13.750 15.625 15.875 19.000 14.750 15.125 9.625 20.000 21.125 9.625 13.875 13.250 13.750 15.000 15.750 19.750 16.500 18.625 12.875 16.000 12.875 15.125 13.000 14.875 12.000 14.000 11.750 9.750 11.750 14.625 14.000 16.000 13.000 12.875 13.250 16.000 19.000 12.125 11.250 13.000 12.000 12.875 10.125 15.500 14.125 9.375 9.375 14.750 11.500 12.125 11.625 9.250 11.750

21.125c 28.875c 18.000c 24.250c 22.500c 26.250c 26.250c 32.500c 24.875c 25.250c 14.250c 34.000c 36.000c 14.250c 22.250c 21.375c 20.750c 23.250c 24.750c 33.750 27.000 31.375 20.250c 26.250c 20.250c 26.625c 20.750c 24.000c 18.750c 22.250c 18.000c 14.000c 18.000c 23.500c 22.250c 26.250c 20.875c 20.000c 21.000c 26.250c 32.625c 19.625c 17.375c 20.750c 18.750c 20.250c 14.625c 25.250c 22.375c 13.375c 14.125c 23.125c 16.125c 18.750c 17.750c 13.625c 18.000c

7.875 11.625 6.250 9.375 8.750 10.625 10.375 13.500 10.125 10.125 4.625 14.000 14.875 4.625 8.375 8.125 7.000 8.250 9.000 14.000 10.500 12.750 7.375 10.250 7.375 11.500 7.750 9.125 6.750 8.250 6.250 4.250 6.250 8.875 8.250 10.250 7.875 7.125 7.750 10.250 13.625 7.500 6.125 7.750 6.750 7.375 4.500 9.750 8.250 4.000 4.750 8.375 4.625 6.625 6.125 4.375 6.250

Bumper Stop Unit. Dimension shown at Bumper Contact. Rancho only engineers its shock absorbers for the applications listed in this catalog. Misapplication of Rancho shock absorbers will result in reduced handling and braking ability and voids warranty. Product Specifications Subject To Change Without Notice.

Rancho Specs listing 4/13/05 11:32 AM Page 189

All listed specifications are for convenience only and are subject to change without notice. Specifications are not intended for design of custom applications.

NOTE:

Specifications

Internal extension bumper may reduce perceived extended length by 1/2". Extended and collapsed length dimensions shown for RS5000 shocks, others may vary slightly.

PART NO.

MOUNTING CODES UPPER LOWER

LENGTHS COMP. EXT.

TRAV.

DUST SHIELD

PARTS PACK

RANCHO RS5000 Shock Absorber — Continued RS5156 RS5157 RS5158 RS5159 RS5160 RS5165 RS5166 RS5167 RS5168 RS5169 RS5179 RS5180 RS5181 RS5182 RS5183 RS5184 RS5185 RS5186 RS5187 RS5188 RS5190 RS5193 RS5194 RS5195 RS5197 RS5198 RS5199 RS5201 RS5202 RS5203 RS5204 RS5205 RS5206 RS5207 RS5208 RS5213 RS5214 RS5215 RS5221 RS5222 RS5223 RS5225 RS5226 RS5227 RS5229 RS5233 RS5234 RS5235 RS5236 RS5237 RS5238 RS5239 RS5240 RS5241 RS5244 RS5246 RS5247 c

S42 L3 S42 S12 S42 LS26 S42 S42 S42 L3 S42 L3 XP8 S42 S42 L3 XP7 S42 S42 S42 XP7 XP7 L1 S51 S51 LS47 S42 S42 L3 L1 S42 L1 S42 S51 S51 S42

XP5 S51 L3 S12 S42 LS26 XP5 L1 LS38 L3 L1 L3 LS39 S42 L3 L3 LS26 L1 L3 LS23 LS47 LS47 LS25 LS47 LS47 LS47 XP8 S42 L3 LS82 S42 L1 L3 S51 L3 LS24

LS78 S51 S42 S42 LS47 L3 XP7 S42 S42 S42 S51 S42 S42 S42 S42 XP12 XP12 LS77 LS26 S42

L3 LS47 XP5 LS24 LS47 L3 LS47 XP4 LS39 LS26 XP5 LS26 LS39 LS26 XP4 L1 LS37 LS39 LS26 LS43

8.500 13.625 13.000 12.750 10.750 14.000 9.500 10.250 15.250 12.750 13.875 13.625 14.000 11.375 11.000 13.000 15.250 13.375 13.000 8.375 15.875 14.125 14.375 9.500 13.750 15.000 9.000 11.500 14.750 12.375 11.375 13.875 13.625 14.250 14.000 11.750 9.700 12.750 14.500 9.000 9.000 16.250 13.125 17.375 13.750 9.750 15.750 10.250 14.375 11.625 16.500 14.375 12.250 13.500 13.000 14.250 14.500

12.125c 22.000c 20.875c 21.000c 16.875c 22.250c 13.750c 15.250c 25.250c 19.625c 22.250c 21.500c 22.250c 18.125c 16.750c 20.250c 25.375 21.500c 20.750c 12.500 26.250c 22.875c 23.250c 13.750c 21.250c 24.375c 13.375 18.500c 23.625c 19.125c 18.500c 22.250c 21.625c 23.375c 22.500c 18.375c 14.990c 19.750c 23.625c 13.625 13.000c 26.875c 20.375 28.875c 18.250c 14.250c 27.000 14.875c 24.000 18.000c 28.500 23.750c 19.000c 21.500c 19.000c 23.000c 24.125

3.625 8.375 7.875 8.250 6.125 8.250 4.250 5.000 10.000 6.875 8.375 7.875 8.250 6.750 5.750 7.250 10.125 8.125 7.750 4.125 10.375 8.750 8.875 4.250 7.500 9.375 4.375 7.000 8.875 6.750 7.125 8.375 8.000 9.125 8.500 6.625 5.290 7.000 9.125 4.625 4.000 10.625 7.250 11.500 4.500 4.500 11.250 4.625 9.625 6.375 12.000 9.375 6.750 8.000 6.000 8.750 9.625

NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE

P1134 P967, P1167 P120, P1134 P969 Two P1134 NONE P1134 P1134 P1135 P119, P967 P920, P1135 P119 NONE Two P1134 P120, P1134 P119 P941 P1134 P120, P1134 P1134 NONE NONE NONE P1167 P1167 NONE P1135 Two P1135 P575 NONE Two P1134 NONE P120, P1134 Two P1167 P120, P1167 P1134 P1134 P120 P1167 P1134 P1134 NONE P119 NONE P941, P1135 P1136 P1135 P1167 P1135 P1136 P1136 P1136 P920 P920 NONE NONE P1135

Bumper Stop Unit. Dimension shown at Bumper Contact.

189

Rancho Specs listing 4/13/05 11:32 AM Page 190

All listed specifications are for convenience only and are subject to change without notice. Specifications are not intended for design of custom applications.

Specifications NOTE:

Internal extension bumper may reduce perceived extended length by 1/2". Extended and collapsed length dimensions shown for RS5000 shocks, others may vary slightly.

PART NO.

MOUNTING CODES UPPER LOWER

LENGTHS COMP. EXT.

TRAV.

DUST SHIELD

PARTS PACK

RANCHO RS5000 Shock Absorber — Continued RS5248 RS5251 RS5254 RS5255 RS5256 RS5259 RS5260 RS5261 RS5262 RS5263 RS5264 RS5265 RS5267 RS5268 RS5269 RS5272 RS5273 RS5274 RS5279 RS5281 RS5282 RS5283 RS5284 RS5285 RS5286 RS5288 RS5289 RS5295 RS5296 RS5297 RS5298 RS5299 RS5300 RS5301 RS5304 RS5601 RS5602 RS5604 RS5605 RS5606 RS5607 RS5609 RS5761 RS5762 RS5763 RS5764 RS5766 RS5767 RS5770 RS5773 RS5774

LS28 S42 L1 S42 XP12 L1 LS79 L1 LS47 S42 L1 S42 L1 S42 LS47 S51 L1 LS47 S51 S51 S51 S51 LS52 LS39 LS39 S51 S51 S51 S51 LS47 LS38 XP7 S42 XP7 LS92 L1 S42 L1 S42 S42 S41 S42 S51 S51 S51 S12 S51 S12 S51 S51 S12

LS28 LS43 LS26 XP4 L1 LS25 LS25 LS26 LS47 XP5 LS53 SPEC LS53 SPEC LS47 L1 LS53 LS47 XP12 XP12 LS47 LS47 LS28 LS39 LS39 LS42 LS42 LS42 LS42 LS47 LS38 LS47 LS21 LS47 LS91 L1 XP1 S42 LS23 LS37 S41 XP5 LS43 LS43 LS44 SPEC LS44 LS95 LS43 LS92 LS95

RS99001 RS99005 RS99006 RS99007 RS99008

L1 L1 L1 L1 L1

L1 L2 L1 LS26 L1

15.375 15.750 18.125 15.750 15.000 13.500 13.500 19.125 15.750 9.875 15.375 10.875 14.250 13.875 16.500 10.250 16.625 16.000 10.750 9.625 11.000 12.500 14.000 15.375 16.500 12.500c 15.500c 10.375 13.375 18.000 10.875 13.375 10.000 14.750 16.500 12.250 8.875 11.875 8.875 9.750 12.250 9.125 13.500 13.625 13.500 9.750 13.625 17.375 10.875 15.125 15.750

24.625c 27.000 30.750 26.375c 24.625c 21.500c 21.500c 33.000 25.625c 14.500c 24.375c 15.375c 22.750c 20.750c 27.250c 15.000c 28.000 26.000c 16.375c 14.125c 15.875c 19.150c 22.125c 25.000c 27.250c 15.125c 21.625c 15.125c 21.625c 30.375c 16.750 21.000c 14.500c 23.000c 22.250c 19.750c 13.375c 19.250c 13.750 15.000 19.625c 14.375 18.125c 18.250c 16.125c 13.875c 18.000c 21.625c 16.000c 19.000c 20.625c

9.250 11.250 12.625 10.625 9.625 8.000 8.000 13.875 9.875 4.625 9.000 4.500 8.500 6.875 10.750 4.750 11.375 10.000 5.625 4.500 4.875 6.650 8.125 9.625 10.750 2.625 6.125 4.750 8.250 12.375 5.875 7.625 4.500 8.250 5.750 7.500 4.500 7.375 4.875 5.250 7.375 5.250 4.625 4.625 2.625 4.125 4.375 4.250 5.125 3.875 4.875

NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE Yes Yes Yes NONE NONE NONE NONE NONE NONE NONE NONE NONE Yes Yes Yes Yes NONE Yes Yes NONE

NONE P1134 NONE P1136 P920 NONE NONE NONE NONE P1135 NONE P1135 NONE P1269 NONE NONE NONE NONE P1167 P1167 P1167 P1167 NONE NONE NONE P1167 P1167 P1167 P1167 NONE NONE NONE P1134 NONE NONE NONE P1134 P1134 P1134 P1135 Two P1134 P1134 P1167 P1167 P1167 NONE P1167 P1388 P1167 P1365 P1388

NONE NONE NONE NONE NONE

P816, P976 P934 P915, P927, P1057 NONE P920, P1020

RANCHO RS9000X Shock Absorber

c

190

13.625 17.500 11.750 15.000 13.875

20.750c 28.625c 17.375c 23.750c 21.500c

7.125 11.125 5.625 8.750 7.625

Bumper Stop Unit. Dimension shown at Bumper Contact. Rancho only engineers its shock absorbers for the applications listed in this catalog. Misapplication of Rancho shock absorbers will result in reduced handling and braking ability and voids warranty. Product Specifications Subject To Change Without Notice.

Rancho Specs listing 4/13/05 11:32 AM Page 191

All listed specifications are for convenience only and are subject to change without notice. Specifications are not intended for design of custom applications.

NOTE:

Specifications

Internal extension bumper may reduce perceived extended length by 1/2". Extended and collapsed length dimensions shown for RS5000 shocks, others may vary slightly.

PART NO.

MOUNTING CODES UPPER LOWER

LENGTHS COMP. EXT.

TRAV.

DUST SHIELD

PARTS PACK

RANCHO RS9000X Shock Absorber — Continued RS99009 RS99010 RS99012 RS99014 RS99017 RS99028 RS99029 RS99034 RS99036 RS99039 RS99040 RS99042 RS99043 RS99044 RS99045 RS99046 RS99047 RS99048 RS99050 RS99055 RS99056 RS99057 RS99058 RS99059 RS99060 RS99061 RS99062 RS99111 RS99112 RS99113 RS99114 RS99115 RS99116 RS99117 RS99118 RS99119 RS99120 RS99123 RS99124 RS99125 RS99126 RS99128 RS99129 RS99136 RS99138 RS99143 RS99144 RS99145 RS99147 RS99150 RS99151 RS99152 RS99155 RS99156 RS99157 RS99158 RS99159 c

S42 L1 L1 S42 S42 L1 S42 L1 L1 S42 S42 S51 S51 S51 L1 L1 L1 S51 L1 S51 LS47 S42 LS47 LS77 XP7 S42 XP12 L1 L1 L1 L2 S42 L1 S42 L1 L1 L1 LS39 XP7 L1 L1 S42 XP12 S42 S42 L3 L3 S42 LS74 LS77 L1 LS77 LS28 S42 L3 S42 S12

LS38 L1 L1 S42 L1 L1 LS26 L1 L1 L1 LS23 LS47 LS47 LS47 LS26 LS26 LS27 LS47 LS26 LS42 LS47 LS47 LS47 LS39 LS47 XP4 LS24 L1 L1 L1 L2 L1 L1 L1 L1 L1 L1 LS39 LS47 LS26 LS26 XP4 L1 L1 LS26 L3 L3 LS82 LS74 LS39 L1 LS39 LS26 XP5 S51 L3 S12

16.000 16.125 19.375 15.000 15.500 16.875 10.375 20.125 21.125 10.375 14.000 13.750 15.000 15.750 19.750 16.375 18.500 16.750 18.000 17.625c 19.250 14.875 18.125 15.500 18.500 16.250 15.750 13.125 16.125 13.125 15.375 13.250 15.000 12.250 14.250 11.625 9.750 11.625 15.000 14.375 16.125 13.250 13.125 11.375 13.250 15.875 14.250 9.625 14.875 11.500 12.375 12.250 11.625 8.750 14.000 13.375 13.000

26.125c 26.000c 32.250c 24.625c 25.125c 28.125 14.500c 34.000c 36.125c 14.500c 23.375c 20.750c 23.250c 24.750c 33.750 27.000 31.375 26.750c 29.125c 23.000c 32.000c 23.000c 29.750c 24.375c 30.500c 26.625c 25.250c 20.000c 26.000c 20.000c 24.250c 20.625c 23.750c 18.625c 22.125c 17.375c 13.500c 17.375c 23.750c 22.250c 26.000c 20.500c 19.875c 16.750c 20.625c 25.000c 21.875c 13.375c 23.000c 15.750c 18.500c 17.875c 17.375c 11.625c 22.000c 20.750c 21.000c

10.125 9.875 12.875 9.625 9.625 11.250 4.125 13.875 15.000 4.125 9.375 7.000 8.250 9.000 14.000 10.625 12.875 10.000 11.125 5.375 12.750 8.125 11.625 8.875 12.000 10.375 9.500 6.875 9.875 6.875 8.875 7.375 8.750 6.375 7.875 5.750 3.750 5.750 8.750 7.875 9.875 7.250 6.750 5.375 7.375 9.125 7.625 3.750 8.125 4.250 6.125 5.625 5.750 2.875 8.000 7.375 8.000

NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE

P1192 P920, P1057 P915, P934 Two P1192 P829, P1192 P915, P934 P1192 P915, P1013 P915, P1013 P1013, P1192 P1192 P1356 P1356 P1356 NONE NONE NONE P1356 NONE P1271 NONE P1192 NONE NONE NONE P1270 NONE NONE P913, P915, P1013 P916 P939 P910, P1192 P916, P1013 P910, P1192 P910, P912, P1013 P916 P915, P916 NONE NONE NONE NONE P941, P1270 NONE P910, P1013, P1192 P1192 NONE NONE P1192 NONE NONE P976 NONE NONE P1192 P967, P1271 P1192 P969

Bumper Stop Unit. Dimension shown at Bumper Contact.

191

Rancho Specs listing 4/13/05 11:32 AM Page 192

All listed specifications are for convenience only and are subject to change without notice. Specifications are not intended for design of custom applications.

Specifications NOTE:

Internal extension bumper may reduce perceived extended length by 1/2". Extended and collapsed length dimensions shown for RS5000 shocks, others may vary slightly.

PART NO.

MOUNTING CODES UPPER LOWER

LENGTHS COMP. EXT.

TRAV.

DUST SHIELD

PARTS PACK

RANCHO RS9000X Shock Absorber — Continued RS99165 RS99166 RS99168 RS99179 RS99180 RS99185 RS99186 RS99187 RS99188 RS99190 RS99193 RS99194 RS99195 RS99197 RS99198 RS99201 RS99202 RS99204 RS99205 RS99207 RS99208 RS99213 RS99214 RS99215 RS99221 RS99223 RS99226 RS99227 RS99229 RS99233 RS99234 RS99235 RS99236 RS99237 RS99238 RS99239 RS99240 RS99241 RS99243 RS99244 RS99246 RS99247 RS99248 RS99251 RS99254 RS99255 RS99256 RS99259 RS99260 RS99261 RS99262 RS99263 RS99264 RS99265 RS99266 RS99267 RS99268 c

192

L1 S42 S42 S42 L3 XP7 S42 S42 S42 XP7 XP7 L1 S51 S51 LS47 S42 L3 S42 L1 S51 S51 S42 S42 LS78 S51 S42 L3 XP7 S42 S51 S42 S51 S42 S51 S42 S42 XP12 XP12 S42 LS77 LS26 S42 LS28 S42 L1 S42 XP12 L1 LS29 L1 LS47 S42 L1 S42 XP7 L1 S42

L1 XP5 LS38 L1 L3 LS26 L1 L3 LS23 LS47 LS47 LS25 LS47 LS47 LS47 S42 L3 S42 L1 S51 L3 LS82 LS23 L3 LS47 LS24 L3 LS47 XP4 LS39 LS26 XP5 LS26 LS39 LS26 XP4 LS24 LS24 LS43 LS39 LS26 LS43 LS28 LS43 LS26 XP4 LS24 LS25 LS25 LS26 LS47 XP5 LS26 SPEC LS26 LS26 SPEC

14.375 9.750 15.500 14.000 13.875 16.125 13.125 13.250 8.875 16.375 14.625 14.625 9.875 14.000 15.750 11.875 15.125 11.625 14.250 14.500 14.625 12.000 10.375 12.875 15.000 9.375 13.000 16.750 13.875 10.250 16.125 10.500 14.625 12.000 17.250 14.500 12.750 13.625 17.250 14.125 14.625 14.625 15.125 16.125 18.250 15.875 15.125 13.875 13.875 19.250 15.125 10.125 15.625 11.000 16.875 14.500 13.875

22.250c 13.750c 25.125c 22.375c 21.125c 26.000c 20.375c 20.500c 12.375 26.250c 22.875c 23.125c 13.750c 21.375c 25.000c 18.500c 23.625c 17.875c 22.125c 23.250c 23.250c 18.125c 14.500c 19.125c 23.250c 13.000c 19.500c 27.250c 18.000c 14.500c 27.000 14.875c 23.875 18.000c 28.625c 23.125c 19.125c 20.875c 28.625c 21.750c 23.125c 23.875 24.000c 27.000 30.750 25.875c 24.000c 21.500c 21.500c 32.875 23.875c 14.375c 24.375c 15.250c 28.125 22.250c 20.750c

7.875 4.000 9.625 8.375 7.250 9.875 7.250 7.250 3.500 9.875 8.250 8.500 3.875 7.375 9.250 6.625 8.500 6.250 7.875 8.750 8.625 6.125 4.125 6.250 8.250 3.625 6.500 10.500 4.125 4.250 10.875 4.375 9.250 6.000 11.375 8.625 6.375 7.250 11.375 7.625 8.500 9.250 8.875 10.875 12.500 10.000 8.875 7.625 7.625 13.625 8.750 4.250 8.750 4.250 11.250 7.750 6.875

NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE

P1059 P1192 P1192 P974, P1192 NONE P941 P974 P1192 P1192 NONE NONE NONE P1271 P1271 NONE Two P1192 P888 Two P1192 NONE Two P1271 P1271 P1192 P1192 NONE P1271 P1192 NONE NONE P941, P1192 P1271 P1192 P1271 P1192 P1271 P1192 P1192 NONE NONE P1192 NONE NONE P1192 NONE P1192 NONE P1270 NONE NONE NONE NONE NONE P1192 NONE P1192 NONE NONE P1192

Bumper Stop Unit. Dimension shown at Bumper Contact. Rancho only engineers its shock absorbers for the applications listed in this catalog. Misapplication of Rancho shock absorbers will result in reduced handling and braking ability and voids warranty. Product Specifications Subject To Change Without Notice.

Rancho Specs listing 4/13/05 11:32 AM Page 193

All listed specifications are for convenience only and are subject to change without notice. Specifications are not intended for design of custom applications.

NOTE:

Specifications

Internal extension bumper may reduce perceived extended length by 1/2". Extended and collapsed length dimensions shown for RS5000 shocks, others may vary slightly.

PART NO.

MOUNTING CODES UPPER LOWER

LENGTHS COMP. EXT.

TRAV.

DUST SHIELD

PARTS PACK

RANCHO RS9000X Shock Absorber — Continued RS99269 RS99270 RS99272 RS99273 RS99274 RS99275 RS99276 RS99278 RS99279 RS99280 RS99281 RS99282 RS99283 RS99284 RS99286 RS99287 RS99288 RS99289 RS99295 RS99296 RS99297 RS99301 RS99303 RS99304 RS99762 RS99763 RS99764 RS99766 RS99767 RS99768 RS99769 RS99771 RS99772 RS99773 RS99774

LS47 S51 S51 L1 LS47 XP7 S51 XP7 S51 S51 S51 S51 S51 LS30 LS39 LS39 S51 S51 S51 S51 LS47 XP7 LS47 LS47 S51 S51 S15 S51 S15 S15 S15 S51 S51 S51 S15

LS47 XP5 L1 LS26 LS47 LS26 LS47 LS26 XP12 LS47 XP12 LS47 LS47 LS28 LS39 LS39 LS42 LS42 LS42 LS42 LS47 LS47 LS47 LS44 LS43 LS44 SPEC LS43 SPEC SPEC SPEC LS92 LS92 LS92 LS95

RSX17000 RSX17001 RSX17002 RSX17003 RSX17004 RSX17005 RSX17006 RSX17007 RSX17008 RSX17009 RSX17010 RSX17011 RSX17012 RSX17013 RSX17014 RSX17015 RSX17016 RSX17017 RSX17018 RSX17019 RSX17020

LS39 XP7 L2 LS39 LS28 L1 L1 L1 L1 L1 S42 S42 LS26 L1 S51 S42 L1 S42 XP7 S42 S42

LS39 LS47 L2 L2 LS28 L1 L1 LS38 L1 LS26 LS26 LS43 LS26 LS26 XP5 LS26 LS26 L1 LS26 L2 LS39

16.875 13.375 10.375 16.875 16.375 19.375 11.750 15.500 11.000 13.750 9.875 11.375 13.000 14.125 17.250 18.500 12.750c 15.875c 10.625 13.750 18.500 14.625 15.375 16.875 13.625 13.500 7.625 13.625 16.625 18.125 21.375 11.000 11.625 15.125 17.375

27.250c 20.750c 14.875c 28.125 26.250c 32.875 17.500c 25.125 13.375c 20.750c 14.125c 15.875c 19.250c 22.000c 28.250c 30.500c 15.250c 21.625c 15.250c 21.625c 30.500c 23.000c 24.125c 27.250c 18.250c 18.125c 12.125c 18.000c 21.625c 23.125c 26.375c 14.750c 16.375c 19.000c 21.625c

10.375 7.375 4.500 11.250 9.875 13.500 5.750 9.625 2.375 7.000 4.250 4.500 6.250 7.875 11.000 12.000 2.500 5.750 4.625 7.875 12.000 8.375 8.750 10.375 4.625 4.625 4.500 4.375 5.000 5.000 5.000 3.750 4.750 3.875 4.250

NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE Yes Yes Yes Yes NONE NONE NONE Yes NONE Yes NONE

NONE P1271 P1271 NONE NONE NONE P1271 NONE P1356 P1271 P1271 P1271 P1271 NONE NONE NONE P1271 P1271 P1271 P1271 NONE NONE NONE NONE P1356 P1167 P1372 P1356 P1388 P1381 P1388 P1356 P1356 P1356 P1388

NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE

NONE NONE NONE NONE NONE P1265 NONE P1267 P1266 NONE P1269 P1269 NONE NONE P1271 P1269 NONE P1269 P941 P1269 P1269

RANCHO RSX17000 Shock Absorber

c

11.125 14.625 13.250 15.875 15.375 11.875 12.750 13.000 13.250 15.000 10.000 14.375 14.125 15.875 10.250 14.375 13.500 10.000 15.375 11.625 9.875

16.500c 24.000 21.125 26.375 24.625c 18.125 19.625 20.250c 21.125 24.875 14.750c 24.000 22.375c 26.500 14.875c 24.000 21.750 14.500c 25.375 18.500 14.375c

5.375 9.375 7.875 10.500 9.250 6.250 6.875 7.250 7.875 9.875 4.750 9.625 8.250 10.625 4.625 9.625 8.250 4.500 10.000 6.875 4.500

Bumper Stop Unit. Dimension shown at Bumper Contact.

193

Rancho Specs listing 4/13/05 11:32 AM Page 194

All listed specifications are for convenience only and are subject to change without notice. Specifications are not intended for design of custom applications.

Specifications NOTE:

Internal extension bumper may reduce perceived extended length by 1/2". Extended and collapsed length dimensions shown for RS5000 shocks, others may vary slightly.

PART NO.

MOUNTING CODES UPPER LOWER

LENGTHS COMP. EXT.

TRAV.

DUST SHIELD

PARTS PACK

RANCHO RSX17000 Shock Absorber — Continued RSX17021 RSX17022 RSX17023 RSX17024 RSX17025 RSX17026 RSX17027 RSX17028 RSX17029 RSX17030 RSX17031 RSX17032 RSX17033 RSX17036 RSX17037 RSX17038 RSX17039 RSX17040 RSX17041 RSX17043 RSX17044 RSX17045 RSX17046 RSX17047 RSX17048 RSX17049 RSX17050 RSX17051 RSX17052 RSX17053 RSX17054 RSX17058 RSX17060 RSX17061 RSX17062 RSX17065 RSX17068 RSX17069 RSX17070 RSX17071 RSX17072 RSX17073 RSX17075 RSX17077 RSX17079 RSX17080 RSX17081 RSX17082 RSX17121 RSX17122 RSX17123 RSX17124 RSX17128 RSX17129 RSX17130 RSX17131 RSX17301 c

194

S42 L1 LS26 S42 S42 S42 S42 L1 L1 L1 S51 LS47 S51 S42 L1 S42 L1 XP12 S42 XP12 LS77 XP7 S42 XP7 XP7 XP7 S42 L1 LS26 S42 S42 LS40 S42 LS37 L1 L1 S42 LS47 S42 L1 L1 LS29 L1 XP7 S51 LS52 LS28 LS28 LS52 LS74 S42 L1 LS92 LS92 LS91 S51 L1

XP4 LS26 LS26 LS26 LS26 LS26 LS43 LS26 LS26 LS26 LS47 LS47 LS47 XP4 LS25 LS38 LS38 LS37 XP4 L1 LS39 LS47 XP5 LS47 LS47 LS47 XP4 LS36 LS26 LS26 LS26 LS40 XP4 LS37 LS47 L1 SPEC LS47 XP5 LS26 LS26 LS25 LS26 LS26 LS42 LS28 LS29 LS29 LS30 LS52 LS12 L1 LS91 LS91 LS91 LS54 LS26

13.750 14.250 14.500 15.875 10.625 10.250 16.125 14.125 14.375 16.125 9.750 14.875 13.750 12.875 13.500 14.500 12.125 12.750 13.250 12.875 11.250 16.125 9.500 15.500 14.875 14.125 8.500 10.000 13.750 11.625 10.000 13.250 9.000 11.750 14.125 14.375 10.875 15.625 9.875 14.250 19.375 13.875 16.625 16.875 10.375 13.875 14.625 14.625 14.750 15.125 8.250 13.875 15.125 14.500 11.875 14.000 15.000

18.250c 23.000 23.125c 27.000 15.875c 15.000c 27.625c 22.375c 23.125 26.375 13.875c 23.750c 21.250c 20.500c 21.125c 24.375 18.375 19.625c 21.125c 19.750c 16.625c 26.375c 13.750c 25.250c 23.625c 22.375c 12.250 14.750 21.750c 18.500 14.500c 21.000 13.375 18.125 22.750 23.000 15.375c 25.375c 14.500c 22.750c 30.500c 21.750c 28.000 28.250 15.125c 22.125c 23.250c 22.375c 23.250c 24.250c 11.875 22.500 24.125c 22.875c 17.625c 22.250c 24.625

4.500 8.750 8.625 11.125 5.250 4.750 11.500 8.250 8.750 10.250 4.125 8.875 7.500 7.625 7.625 9.875 6.250 6.875 7.875 6.875 5.375 10.250 4.250 9.750 8.750 8.250 3.750 4.750 8.000 6.875 4.500 7.750 4.375 6.375 8.625 8.625 4.500 9.750 4.625 8.500 11.125 7.875 11.375 11.375 4.750 8.250 8.625 7.750 8.500 9.125 3.625 8.625 9.000 8.375 5.750 8.250 9.625

NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE Yes Yes NONE NONE NONE NONE NONE NONE Yes Yes NONE

P941, P1269 NONE NONE P1269 P1269 P1269 P1269 NONE P827 P827 P1271 NONE P1271 P1270 NONE P1269 NONE NONE P1270 NONE NONE NONE P1268 NONE NONE NONE P1268 P19 NONE P864, P1269 P1269 NONE P1268 P816 P19 NONE P1269 NONE P1268 NONE NONE NONE NONE NONE P1271 NONE P1374 P1374 NONE NONE P1268 NONE NONE NONE NONE P1167, P1336 NONE

Bumper Stop Unit. Dimension shown at Bumper Contact. Rancho only engineers its shock absorbers for the applications listed in this catalog. Misapplication of Rancho shock absorbers will result in reduced handling and braking ability and voids warranty. Product Specifications Subject To Change Without Notice.

Rancho Specs listing 4/13/05 11:32 AM Page 195

All listed specifications are for convenience only and are subject to change without notice. Specifications are not intended for design of custom applications.

NOTE:

Specifications

Internal extension bumper may reduce perceived extended length by 1/2". Extended and collapsed length dimensions shown for RS5000 shocks, others may vary slightly.

PART NO.

MOUNTING CODES UPPER LOWER

LENGTHS COMP. EXT.

TRAV.

DUST SHIELD

PARTS PACK

RANCHO RSX17000 Shock Absorber — Continued RSX17302 RSX17303 RSX17304 RSX17305 RSX17306 RSX17308 RSX17309 RSX17310 RSX17311 RSX17312 RSX17313 RSX17314 RSX17315 RSX17316 RSX17317 RSX17318 RSX17319 RSX17320 RSX17321 RSX17322 RSX17324 RSX17326 RSX17327 RSX17328 RSX17329 RSX17330 RSX17331 RSX17332 RSX17337 RSX17338 RSX17339 RSX17340 RSX17341 RSX17342 RSX17344 RSX17345 RSX17346 RSX17501 RSX17502 RSX17503 RSX17504 RSX17505 RSX17506 RSX17507 RSX17508 RSX17509 RSX17510 RSX17511 RSX17512 RSX17513 RSX17515

S42 S42 L2 S42 LS28 S51 LS39 L1 S42 L1 S42 XP7 XP7 LS77 S42 XP12 L1 L1 L1 L1 L1 XP12 S42 L1 S42 LS39 S42 LS26 S42 LS47 S42 XP12 L1 L1 S51 S42 LS47 STRUT STRUT STRUT STRUT S12 S51 S51 S51 S51 STRUT STRUT S15 S51 S51

LS26 L1 L2 LS26 LS28 LS47 LS39 LS26 LS26 LS26 L1 LS26 LS47 LS39 XP4 L1 L1 L1 LS38 L1 LS25 LS37 LS38 LS38 LS39 L2 LS43 LS26 SPEC LS47 XP4 LS37 LS26 LS26 XP5 XP4 LS47

SPEC LS93 LS94 LS43 LS44

SPEC LS44 LS92

12.000 14.000 15.250 11.375 16.250 14.750 13.750 16.000 17.500 14.000 11.125 16.125 17.250 13.750 14.500 14.375 12.375 14.000 13.000 14.000 14.375 13.500 15.250 14.000 11.750 17.500 18.000 15.875 13.875 17.000 15.750 15.125 15.375 19.125 14.500 12.875 15.875 16.750 16.750 16.000 16.000 9.750 18.250c 15.000c 13.625 13.625 16.000 16.000 11.125 13.500 11.000

18.750c 22.875 25.000 17.125c 26.625c 23.250c 22.375 26.875 29.125 22.750 16.875c 26.875 28.750c 21.625c 23.750c 22.875c 19.625 22.250 20.750 22.625 22.875c 21.000c 25.250c 22.250c 18.000c 29.000 29.125 25.875c 20.750c 27.875c 26.125c 24.375c 24.375c 32.375c 20.750c 20.375c 25.750c 22.375c 22.375c 22.625c 22.625c 13.875c 19.000c 19.250c 18.250c 18.000c 22.625c 22.625c 16.125c 16.125c 14.875c

6.750 8.875 9.750 5.750 10.375 8.500 8.625 10.875 11.625 8.750 5.750 10.750 11.500 7.875 9.250 8.500 7.250 8.250 7.750 8.625 8.500 7.500 10.000 8.250 6.250 11.500 11.125 10.000 6.875 10.875 10.375 9.250 9.000 13.250 6.250 7.500 9.875 5.625 5.625 6.625 6.625 4.125 0.750 4.250 4.625 4.375 6.625 6.625 5.000 2.625 3.875

NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE Yes Yes Yes Yes Yes NONE NONE NONE Yes Yes

P1269 P1269 NONE P1269 NONE P1271 NONE NONE P1269 NONE P1269 NONE NONE NONE P1270 NONE P1265 NONE P1267 P1266 NONE NONE P1269 NONE P1269 NONE P1269 NONE P1269 NONE P1270 NONE NONE NONE P1271 P1270 NONE NONE NONE NONE NONE NONE P1366 P1366 P1367 P1357 NONE NONE NONE P1357 P1365

RANCHO RS5400 PREMIUM Steering Stabilizer RS5401 RS5402 RS5403 RS5404 RS5405 c

L1 S42 S42 L1 S42

L1 S42 S42 L1 L1

12.125 12.000 13.000 14.375 12.625

19.250 20.125 22.125 23.875 21.625

7.125 8.125 9.125 9.500 9.000

NONE NONE NONE NONE NONE

P829, P837, P920 Two P1134 Two P1134 P837, P920, P932 P1134

Bumper Stop Unit. Dimension shown at Bumper Contact.

195

Rancho Specs listing 4/13/05 11:32 AM Page 196

All listed specifications are for convenience only and are subject to change without notice. Specifications are not intended for design of custom applications.

Specifications NOTE:

Internal extension bumper may reduce perceived extended length by 1/2". Extended and collapsed length dimensions shown for RS5000 shocks, others may vary slightly.

PART NO.

MOUNTING CODES UPPER LOWER

LENGTHS COMP. EXT.

TRAV.

DUST SHIELD

PARTS PACK

RANCHO RS5400 PREMIUM Steering Stabilizer — Continued RS5406 RS5407 RS5408 RS5409 RS5410 RS5411 RS5412 RS5413

L1 L1 S42 LS5 L1 L1 L1 S42

RS19012 RS19034 RS19036 RS19044 RS19045 RS19237 RS19238 RS19255 RS19256 RS19261 RS19264 RS19268 RS19269 RS19283 RS19287 RS19289 RS19297 RS19304

L1 L1 L1 S51 L1 S51 S42 S42 XP12 L1 L1 S42 LS47 S51 LS38 S51 LS47 LS47

L1 L1 S42 LS24 LS38 LS35 LS24 L1

17.625 12.000 14.625 12.750 14.500 12.500 14.125 15.625

30.250 19.625 25.125 20.450 24.375 20.625 23.250 27.375

12.625 7.625 10.500 7.700 9.875 8.125 9.125 11.750

NONE NONE NONE NONE NONE NONE NONE NONE

NONE P837, P953 Two P1134 P1326 P847 P1368 P1368 P1135, P1385

RANCHO RS19000 PRO SERIES SHOCKS

c

196

L1 L1 L1 LS47 LS26 LS39 LS26 XP4 LS24 LS26 LS26 SPEC LS47 LS47 LS38 LS42 LS47 LS44

19.375 20.125 21.125 15.750 19.750 12.000 17.250 15.875 15.125 19.250 15.625 13.875 16.875 13.000 18.500 15.875 18.500 16.875

32.250 34.000 36.125 24.750 33.750 18.000 28.625 25.875 24.000 32.875 24.375 20.750 27.250 19.250 30.500 21.625 30.500 27.375

12.875 13.875 15.000 9.000 14.000 6.000 11.375 10.000 8.875 13.625 8.750 6.875 10.375 6.250 12.000 5.750 12.000 10.500

No No No No No No No No No No No No No No No No No No

P915 & P934 P915 & P1013 P915 & P1013 P1356 None P1271 P1192 P1270 None None None P1192 None P1271 None P1271 None None

Bumper Stop Unit. Dimension shown at Bumper Contact. Rancho only engineers its shock absorbers for the applications listed in this catalog. Misapplication of Rancho shock absorbers will result in reduced handling and braking ability and voids warranty. Product Specifications Subject To Change Without Notice.

Rancho_MD Specifications 4/12/05 2:35 PM Page 197

Specifications

All listed specifications are for convenience only and are subject to change without notice. Specifications are not intended for design of custom applications.

ADD-A-LEAF SPECIFICATIONS ADD-A-LEAF KIT NUMBER RS50012 RS50112 RS50212 RS60012 RS60013 RS60112 RS60312 RS60412 RS60512 RS60612 RS60613 RS60614 RS60622 RS60622 RS60624 RS60624 RS60632 RS60633 RS60633 RS60634 RS60635 RS60636 RS60637 RS60639 RS60642 RS60645 RS60665 RS60688 RS60675 RS60712 RS60812 RS60913 RS70062 RS60653

LENGTH END TO END 44.000" 50.500" 44.000" 27.500" 45.625" 22.000" 25.750" 50.000" 32.500" 22.000" 44.750" 50.000" 45.750" 36.000" 46.000" 49.750" 42.750" 33.500" 42.750" 55.000" 42.750" 24.250" 36.000" 43.000" 50.500" 42.000" 22.000" 32.000" 33.625" 22.375" 46.750" 48.750" 48.000" 21.500"

WIDTH 2.500" 3.000" 2.500" 2.300" 2.500" 2.000" 3.000" 3.000" 2.000" 2.360" 2.500" 2.500" 2.360" 2.360" 3.000" 3.000" 2.500" 2.500" 2.500" 2.500" 2.360" 2.375" 2.500" 3.000" 3.000" 2.500" 2.360" 2.500" 2.500" 1.750" 2.500" 2.500" 2.500" 3.000"

LEAF THICKNESS 0.360" 0.360" 0.360" 0.630" 0.320" 0.400" 0.630" 0.400" 0.400" 0.400" 0.260" 0.260" 0.260" 0.260" 0.320" 0.320" 0.260" 0.390" 0.260" 0.390" 0.260" 0.250" 0.262" 0.354" 0.390" 0.323" 0.400" 0.323" 0.390" 0.440" 0.310" 0.260" 0.320" 0.710"

ARCH 4.500" 5.000" 4.500" 1.900" 8.650" 2.080" 1.500" 6.375" 3.625" 2.000" 6.750" 4.750" 7.000" 4.750" 7.500" 8.000" 6.250" 3.625" 5.000" 7.850" 6.250" 2.375" 4.750" 7.610" 7.500" 7.900" 2.000" 4.250" 3.440" 2.250" 7.260" 5.500" 8.650" 1.130"

COIL SPRING SPECIFICATIONS SINGLE LEAF 502 503 502 504 319 505 507 508 509 510 313 327 518 519 314 506 316 321 320 317 324 325 328 329 330 331 510 335 333 511 512 513 318 332

LEAF STYLE Flat Flat Flat Tapered Flat Tapered Tapered Flat Flat Tapered Flat Flat Flat Flat Flat Flat Flat Flat Flat Flat Flat Flat Flat Flat Flat Tapered Tapered Flat Flat Tapered Flat Flat Flat Tapered

COIL SPRINGS RS311 RS312 RS601 RS602 RS607 RS608 RS609 RS610 RS611 RS614 RS615 RS616 RS618 RS620 RS621 RS622 RS623 RS630 RS631 RS632 RS633 RS634 RS635 RS636 RS637 RS650 RS663 RS665 RS669 RS670 RS672

RATE LBS. PER IN. 180 222 545 485 545 240 460 250 459 1050 130 150 130 460 804 1190 680 435 520 460 1190 1038 1038 240 200 227 1000 825 925 865 300

FREE LENGTH 16.830" 14.850" 18.680" 17.450" 19.680" 18.000" 19.180" 22.060" 15.320" 14.250" 19.230" 14.760" 18.730" 18.180" 12.420" 13.500" 12.830" 15.690" 16.520" 15.800" 14.200" 12.890" 10.390" 18.440" 14.980" 13.350" 19.760" 17.850" 17.280" 16.490" 16.910"

WIRE COIL KIT(S) SIZE NUMBER 0.560" 6424, 6449 0.578" 6425, 6448 0.781" 80114 0.750" 6402, 6403 0.781" 6400, 6404, 6405 0.625" 6423 0.775" 6406, 6422 0.750" 6481 0.718" 6408 0.843" 6500 0.531" 6503, 6506 0.593" 6502, 6503, 6506 0.531" 6502 0.775" 6420, 6430, 6436 0.718" 6455, 6460 0.905" 6458 0.625" 6457 0.688"6421, 6431, 6432, 6433 0.718" 6434, 6435 0.718" 6439, 6441 0.905" 6462 0.843" 6465 0.812" 6463 0.625" 6413 0.562" 6414 0.578" 6490 0.906" 6243 0.843" 6289 0.843" 6275 0.812" 6275 0.750" 6546

TORSION BAR SPECIFICATIONS TORSION BARDIAMETER LENGTH P/N Diameter 1632 24MM 1633 24MM 1634 34MM 1635 34MM

KIT Length 41.930" 41.930" 54.020" 54.020"

Kit 619 619 640 640

SPRING SPECIFICATIONS LEAF SPRING NUMBER RS305 RS305L RS306 RS610 RS820 RS825 RS16243 RS24043 RS27743 RS40054S RS41054S RS42054S RS42055 RS42056 RS43033 RS43133 RS44010 RS44020 RS44044 RS44046 RS44047 RS44050 RS44051 RS44053 RS44054 RS44055 RS44056 RS44057 RS44061 RS44062 RS44082 RS44091 RS44092 RS44110 RS44120 RS44121 RS44146 RS44147 RS44148 RS44150 RS44154 RS44161 RS44162 RS44182 RS44191 RS44192 RS46053S RS86201 RS86202 RS86206 RS86209 RS86210 RS86211

RATE LBS. PER IN. 300 300 160 250 509 448 711 604 492 672 720 605 428 428 391 290 353 349 300 256 174 174 644 834 435 435 460 450 335 314 330 300 325 330 316 196 156 200 186 200 280 280 287 308 290 290 590 340 450 520 287 348 230

EYE TO EYE FLAT LENGTH 45.120" 45.120" 47.820" 22.060" 43.860" 56.920" 36.700" 44.640" 50.390" 46.900" 43.570" 48.040" 48.080" 48.040" 44.130" 45.470" 36.240" 36.500" 47.000" 36.800" 45.200" 46.000" 52.500" 52.500" 55.700" 55.700" 55.700" 55.700" 40.000" 40.500" 44.260" 44.880" 44.880" 42.000" 42.500" 64.000" 39.360" 45.600" 51.500" 45.900" 59.150" 46.100" 46.700" 45.680" 45.400" 45.400" 54.090" 46.900" 46.900" 46.900" 52.000" 46.900" 52.000"

ARCH (FREE) 4.050" 4.700" 7.700" — 6.970" 7.110" 3.680" 5.750" 6.750" 3.500" 2.860" 3.190" 1.750" 2.850" 5.450" 8.360" 3.170" 4.370" 6.580" 2.750" 6.750" 7.620" 6.000" 6.250" 6.500" 4.950" 7.600" 6.100" 3.590" 5.100" 5.670" 4.250" 5.500" 4.640" 5.630" 2.680" 4.050" 6.650" 5.870" 7.250" 8.200" 4.150" 6.150" 5.670" 4.350" 5.600" 4.920" 3.750" 3.000" 3.720" 7.750" 3.470" 9.170"

EYE SIZE FRONT 1.190" 1.190" 1.500" — 1.170" 1.170" 0.750" 1.250" 1.000" 1.130" 1.130" 1.020" 1.000" 1.030" 1.380" 1.380" 0.560" 0.560" 1.500" 1.500" 1.250" 1.250" 2.000" 2.000" 2.050" 2.050" 2.050" 2.050" 0.880" 0.880" 1.500" 1.500" 1.500" 0.560" 0.560" 1.500" 1.500" 1.250" 1.500" 1.250" 2.050" 0.880" 0.880" 1.500" 1.500" 1.500" 1.610" 1.500" 1.500" 1.500" 1.500" 1.130" 1.500"

OFF-SET NUMBER EYESIZE THICKNESS (CNTR. BOLT) OF REAR WIDTH IN CENTER FRONT/REAR LEAVES 1.190" 2.360" 0.980" — 3 1.190" 2.360" 0.980" — 3 1.500" 2.360" 1.490" 20.470"/27.350" 5 — — 0.750" — — 1.170" 2.000" 1.940" — 6 1.170" 2.000" 2.410" — 6 0.880" 1.750" 1.440" — 4 1.500" 2.500" 1.440" — 4 1.000" 1.750" 1.700" 24.250"/26.140" 4 1.500" 2.500" 1.920" — 5 1.500" 2.500" 2.010" — 5 1.020" 2.500" 1.920" — 5 1.000" 2.500" 1.700" — 5 1.030" 2.500" 1.700" — 5 1.380" 2.750" 1.660" 20.310"/23.820" 6 1.380" 2.750" 1.500" 20.650"/24.820" 6 0.870" 1.750" 1.380" — 5 0.870" 1.500" 1.380" — 5 1.500" 2.500" 1.660" 22.500"/24.500" 6 1.500" 2.000" 1.050" — 4 1.500" 2.000" 0.790" — 3 1.500" 2.000" 0.790" — 4 2.000" 3.000" 2.000" 24.000"/28.500" 5 2.000" 3.000" 2.240" 24.000"/28.500" 5 1.720" 3.000" 2.750" 27.600"/28.100" 9 1.720" 3.000" 2.750" 27.600"/28.100" 9 1.720" 3.000" 2.820" 27.600"/28.100" 9 1.720" 3.000" 2.750" 27.600"/28.100" 9 0.880" 1.750" 1.660" — 6 0.880" 1.500" 1.660" — 6 1.000" 2.500" 1.930" — 7 1.000" 2.000" 1.450" — 5 1.000" 2.000" 1.450" — 5 0.870" 1.750" 1.540" — 5 0.870" 1.750" 1.540" — 5 1.500" 2.500" 0.900" — 2 1.500" 2.000" 1.180" — 4 1.500" 2.500" 1.050" — 4 1.500" 2.500" 1.390" 23.000"/28.500" 5 1.500" 2.500" 1.050" — 4 1.720" 3.000" 2.330" 25.500"/33.650" 8 0.880" 1.750" 1.840" — 6 0.880" 1.750" 1.840" — 6 1.000" 2.500" 1.660" — 6 1.000" 2.500" 1.380" — 5 1.000" 2.500" 1.380" — 5 1.380" 3.000" 1.450" 26.810"/27.280" 3 1.130" 2.500" 1.040" — 3 1.130" 2.500" 1.690" — 5 1.130" 2.500" 1.800" — 5 1.500" 2.500" 2.290" — 6 1.500" 2.500" 2.430" — 9 1.500" 2.500" 1.750" — 6 Rancho only engineers its shock absorbers for the applications listed in this catalog. Misapplication of Rancho shock absorbers will result in reduced handling and braking ability.

197

Rancho_MD Specifications 4/12/05 2:35 PM Page 198

Specifications

All listed specifications are for convenience only and are subject to change without notice. Specifications are not intended for design of custom applications.

STEEL SLEEVE SPECIFICATIONS PART NUMBER RS420 RS421 RS422 RS423 RS424 RS425 RS426 RS427 RS428 RS429 RS430 RS431 RS440 RS441 RS445 RS448 RS452 RS453 RS457 RS460 RS461 RS464 RS468 RS471 RS473 RS474 RS479 RS483 RS485 RS411001 RS411002 RS411012 RS603538 RS603540 RS603545

U-BOLT SPECIFICATIONS

OD

ID

LENGTH

0.750" 0.630" 0.750" 0.630" 0.750" 0.560" 0.630" 0.630" 0.750" 0.750" 0.750" 0.750" 0.810" 0.810" 0.560" 0.750" 1.000" 0.810" 0.750" 0.880" 0.750" 0.630" 0.750" 0.750" 0.750" 0.690" 0.750" 0.750" 0.750" 0.630" 0.750" 0.630" 0.630" 0.630" 0.630"

0.560" 0.440" 0.550" 0.440" 0.560" 0.440" 0.440" 0.500" 0.560" 0.560" 0.630" 0.560" 0.500" 0.500" 0.500" 0.500" 0.750" 0.500" 0.560" 0.630" 0.630" 0.440" 0.500" 0.500" 0.500" 0.500" 0.560" 0.560" 0.500" 0.560" 0.500" 0.500" 0.440" 0.500" 0.380"

3.650" 3.700" 3.510" 3.510" 3.000" 1.800" 2.200" 2.800" 2.750" 2.950" 3.370" 3.400" 1.250" 0.310" 1.250" 1.400" 1.750" 1.750" 2.600" 0.630" 1.900" 5.020" 2.550" 3.050" 2.450" 2.750" 1.800" 2.040" 1.600" 1.600" 1.630" 1.310" 2.610" 1.610" 0.500"

BUSHING SPECIFICATIONS PART NUMBER RS520 RS521 RS523 RS524 RS526 RS527 RS529 RS532 RS533 RS534 RS536 RS537 RS538 RS540 RS541 RS553 RS554 RS624 RS625 RS626 RS627 RS628 RS629

BEVELED LIP A No 0.740" Yes 0.616" Yes 0.616" No 0.740" — 0.615" No 0.620" — 0.738" Yes 0.510" Yes 0.510" Yes 0.616" No 0.710" — 0.750" No 0.590" — 0.875" No 0.585" Yes 0.750" Yes 0.750" No 0.750" No 0.750" Yes 0.750" Yes 0.750" No 0.750" No 0.713"

DIMENSION B C 1.900" 1.510" 1.900" 1.135" 1.900" 1.135" 1.900" 1.510" — 1.190" 1.420" 1.025" — 1.256" 1.400" 1.010" 1.400" 1.010" 1.900" 1.135" 1.450" 1.190" 1.480" 1.250" 1.250" 0.950" — 1.500" 2.000" 1.375" 1.900" 1.500" 1.900" 1.510" 1.900" 1.510" 1.900" 1.510" 1.900" 1.500" 1.800" 1.260" 1.900" 1.510" 1.900" 1.510"

D 1.750" 1.735" 1.665" 1.450" 2.000" 1.310" 1.250" 1.285" 1.535" 1.500" 1.320" 1.610" 1.460" 1.250" 1.460" 1.250" 0.975" 1.425" 1.425" 1.300" 1.460" 1.430" 1.310"

E 0.560" 0.560" 0.490" 0.500" — 0.160" —0.270" 0.270" 0.325" 0.130" — 0.110" — 0.110" 0.200" 0.250" 0.250" 0.250" 0.120" 0.300" 0.220" 0.170"

NOTES: Steel sleeve is advisable for most bushings. •Part Number 537 is a shock bushing. •Part Number 625 is high tensile strength material.

198

Rancho only engineers its shock absorbers for the applications listed in this catalog. Misapplication of Rancho shock absorbers will result in reduced handling and braking ability.

PART NUMBER RS17402 RS17404 RS17406 RS17407 RS17408 RS17409 RS17410 RS17412 RS17413 RS17414 RS17415 RS17431 RS17432 RS17433 RS17436 RS17437 RS17454 RS17455 RS17460 RS17463 RS17469 RS17470 RS17472 RS17474 RS17475 RS17476 RS17477 RS17479 RS17481 RS17482 RS17483 RS17484 RS17485 RS17486 RS17487 RS17488 RS17489 RS17490 RS17491 RS17492 RS17493 RS17494 RS17495 RS17496 RS17497 RS17498 RS17499 RS740012 RS740013 RS740014 RS740015 RS740016 RS740018 RS740035

THREAD SIZE 5/8" 1/2" 1/2" 9/16" 9/16" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 5/8" 5/8" 5/8" 5/8" 5/8" 1/2" 1/2" 9/16" 1/2" 9/16" 9/16" 5/8" 5/8" 5/8" 5/8" 5/8" 9/16" 9/16" 9/16" 9/16" 5/8" 5/8" 9/16" 5/8" 9/16" 9/16" 9/16" 9/16" 9/16" 9/16" 9/16" 9/16" 5/8" 5/8" 9/16" 9/16" 5/8" 9/16" 9/16" 9/16" 5/8" 5/8" 9/16"

ROUND OR SQUARE Round Round Round Square Round Round Round Round Round Round Round Round Round Round Round Round Round Round Square Round Round Round Round Round Round Round Round Square Square Round Round Round Round Square Square Square Square Round Round Round Round Round Square Round Round Round Stud Round Round Square Square Square Round Square

ID WIDTH 3.630" 3.250" 3.500" 2.430" 2.560" 3.630" 2.310" 3.250" 2.550" 3.200" 2.880" 3.000" 3.630" 2.810" 3.250" 4.000" 2.550" 3.130" 2.560" 2.850" 3.250" 3.250" 3.000" 3.650" 3.650" 2.780" 2.960" 2.560" 3.130" 3.220" 3.250" 2.980" 3.300" 2.560" 2.560" 2.560" 2.560" 2.810" 3.030" 3.500" 2.810" 3.000" 2.560" 3.380" 2.980" 3.750" --------3.270" 3.240" 2.560" 3.110" 2.550" 3.010" 2.430"

ID LENGTH 13.000" 7.630" 8.000" 6.630" 6.380" 8.500" 6.500" 9.750" 6.500" 6.750" 6.750" 9.250" 11.500" 9.250" 8.750" 9.250" 6.250" 6.550" 7.500" 10.000" 6.800" 7.750" 7.380" 9.000" 10.120" 1.600" 7.800" 16.000" 8.000" 13.120" 10.750" 12.120" 12.620" 14.500" 9.000" 8.500" 13.000" 10.130" 11.250" 8.000" 7.500" 7.500" 11.000" 11.000" 10.620" 8.000" 4.590" 13.000" 12.100" 12.500" 10.000" 10.150" 10.600" 7.750"

CAUTION: THIS U-BOLT LISTING IS INTENDED FOR DIRECT REPLACEMENT OF EXISTING CATALOG APPLICATIONS ONLY; not intended for custom applications. Notes:

For individual U-bolts, delte the 1 at the front of the part numbers.

BUMP STOP SPECIFICATIONS BUMP STOP RS8202 RS8203 RS8204 RS8205 RS8206 RS8207 RS8208 RS8213 RS8216

A

B

C

D

4.500" 2.850" 2.850" 2.850" 2.850" 2.850" 2.850" 2.850" 2.850"

3.000" 3.500" 4.500" 5.500" 2.000" 3.500" 3.750" 5.000" 5.000"

3.000" 2.000" 2.000" 2.000" 2.000" 2.000" 2.000" 2.000" 2.000"

2.500" 1.750" 1.750" 1.750" 1.750" 1.750" 1.750" 1.750" 1.750"

1/8" 1/4" 3/8" 7/16" 1/2" 9/16" 5/8"

= = = = = = =

FRACTION TO DECIMALS .125/.13 11/16" .250/.25 23/32" .375/.38 3/4" .438/.44 13/16" .500.50 7/8" .563/.56 15/16" .625/.63 1"

= = = = = = =

.688/.69 .719/.72 .750/.75 .813/.81 .875/.88 .938/.94 1.000/1.00

Rancho Footnotes200-202 4/12/05 3:21 PM Page 200

Footnotes 1. Front shock must be installed rod end down (without shock boot). 1

2. 1976 ⁄2 - 1986 Blazer or Jimmy and short bed pickups with a 49suspension system will require a transfer case lowering kit part number RS6631. Some vehicles equipped with 2 1⁄29 suspension system may experience a driveline vibration. Part number RS6631 can be used to possibly correct the vibration, but a driveline vibration may still be present. CAUTION: RANCHO DOES NOT RECOMMEND INSTALLING A 49 SUSPENSION SYSTEM ON VEHICLES EQUIPPED WITH THE “LONG” REAR TAIL SHAFT HOUSING, REAR UNIVERSAL WEAR WILL BE ACCELERATED AND DRIVELINE VIBRATION WILL OCCUR. 4. Check the Shock Application section for the correct shocks used on vehicles which come equipped with OE Quad Suspension or Add on Dual Shock Option. 5. On CJ’s with 4 speed transmissions, rear driveline will need to be lengthened, transfer case cross member will need to be lowered from frame 1⁄29 and driveline vibration will occur. Use Lowering Bracket Kit to lower transfer case 1⁄29. Part No. RS6633 fits 1941-1975. Part No. RS6639 fits 1976-1986. 6. If these vehicles have a Detroit-type driveline, the driveline must be replaced by a Spicer-type driveline.

2005 RANCHO 17. Will not fit vehicles equipped with big block engines, 159 or smaller wheels, or vehicles with anti-lock brakes (ABS). 18. The net raised height achieved with this system is dependent upon the adjustment of the torsion bars prior to installation. Example: If the Rancho System is listed as 39, but the torsion bars on a vehicle are adjusted to 19 over stock, the net raised height will be 29.The net raised height will be 19 less on vehicles equipped with the Z71 Off Road Package. 19. RS968 49 C-Bushing Kit is required to align vehicle. 20. Additional washers may be required to increase space between shocks on lower mount. 21. On 1976-81 CJ5, CJ7, Scrambler 2 1⁄29 Suspension System RS5119 & RS99119 may be too short and you must use RS5113 & RS99113 with Bump Stop Kit No. RS8203. 22. Part No. RS8125 axle shim kit may be required on rear axle for shock-toaxle clearance. 23. I.D. of shock bushing is smaller than mounting pin & requires lubrication & extra effort for installation. 24. Slight grinding of lower control arm is required.

7. On some models a low speed vibration may occur in the front driveline. 8. If tie rod assembly is Diagram 1 - inverted “Y” it must be changed to Diagram 2 later model, 1978-79, inverted “T” style, (see below). CAUTION: SOME VEHICLES WILL BE UNABLE TO CHANGE TO THE INVERTED “T”, THEREFORE A DUAL STABILIZER OR A SUSPENSION SYSTEM CANNOT BE INSTALLED. VEHICLES EQUIPPED WITH A POWER STEERING CYLINDER CANNOT BE CONVERTED TO THE INVERTED “T”.

25. Steering arm may contact shock body on RS5113, RS5119, RS99113 & RS99119 on FJ43 & FJ45. Install shock boot towards ground for additional clearance. 26. This Spring is required with the Primary Suspension System, to get the proper lift. 27. Bumpstop must be lowered 29 or damage to shock will occur. 28. Must have factory hole in tie rod for stabilizer. 29. We recommend installing new ball joints when installing Part No. RS6500.

9. Rancho highly recommends the use of the constant velocity (Spicer style) front driveshaft, as used in the Jeep factory trailer towing option.The Jeep original equipment, light duty, double offset joint, front driveshaft should not be used if any of the following conditions occur. If you have Select-Track Option. If you drive 55-65 mph for long periods of time.You tow a trailer.You use your vehicle to pull other vehicles out from being stuck. If you use the light duty driveshaft you will experience driveshaft boot wear and will need to re-pack the offset joint periodically and replace the boot periodically. 10. 1987-90 4WD Blazer or Jimmy and short bed pickups with a 49 suspension system will require a transfer case lowering kit part number RS6640. Some vehicles equipped with 2 1⁄29 suspension system may experience a driveline vibration. Part number RS6640 can be used to possibly correct the vibration, but a driveline vibration may still be present.The exhaust cross pipe will need to be modified to clear front drive shaft. 11. RS8701 is required to restore the turning radius, on right turns. 12. If the rear of your vehicle is equipped with a height-sensitive brake proportioning valve, contact your local dealer for correct adjustment procedure of the proportioning valve. CAUTION: VEHICLES WITH NO ADJUSTMENT PROCEDURE, RANCHO DOES NOT RECOMMEND INSTALLATION OF THE ADD-LEAF OR LEV-A LOAD. 13. Block Kit No. RS70054 is required with RS86209 Rear Spring for a 49 lift. 14. Full Size Lev-A-Load Kits will not fit vehicles with factory overload mounted above leaf spring. 15. Vehicles with a 13 1⁄49 rear driveshaft will require a transfer case lowering kit RS6644. 200

30. Kit RS60612 will work on 1983-86 Nissan but raises rear 29-39. 31. 1967-72 Chevrolet/GMC Trucks may be equipped with a non-adjustable drag link. In these cases the drag link will need to be replaced with a late model Chevrolet/GMC adjustable link, available through your Chevrolet or GMC dealer. 32. On Blazer/Jimmy with worn or sagging rear springs, vehicle will sit low in rear.Rear Add-A-Leaf part No. RS60812 will correct this. 34. RS996 Rockcrawler Bushing Rebuild Kit is Available (Rebuilds one Link 4 Kits required for completed vehicle.) 35. Height will vary due to inconsistent factory height. 36. On M38, vehicle spring anchor mounts will need to be drilled out and you must buy Jeep spring anchor bolt Part No. RS384228 (4 per vehicle) to install springs. Available from your Jeep dealer. 37. Remove 1⁄29 O.D. x 7⁄169 I.D. sleeves, if used, from the old spring shackle ends and insert sleeves into the Rancho bushings. 38. On all Dodges, the use of our Kicker Shock Kit No. RS1804 is required to greatly reduce rear end windup. 39. Vehicles equipped with GM’s Auto Trak system WILL REQUIRE the replacement of the front drive shaft or else severe drive line vibration and noise will occur. Rancho recommends “Powertrain Industries” part number 3194-9800 or equivalent. Available from: Powertrain Industries, Inc. 7532 Anthony Ave. Garden Grove, CA 92841.Toll Free: 1-800-7984585. Email: [email protected]. 40. May need longer rear U-bolt Kit RS737. 89-91 standard cab, short bed Toyota requires U-bolt Kit RS745.

FOOTNOTES MUST BE READ! THEY CONTAIN IMPORTANT INFORMATION AND RECOMMENDATIONS PERTAINING TO CERTAIN APPLICATIONS.

Rancho Footnotes200-202 4/12/05 3:21 PM Page 201

2005 Rancho 43. Will require minor modification to inner fender well.

Footnotes component directly to Rancho’s Technical Department and a replacement part will be sent out immediately.

46. Must have rear mount fuel tank only, no side saddle tanks. 48. RS60612 may be used for this application will lift 3⁄49. 49. This Add-A-Leaf may be too long for some vehicles.The ends of the leaf may be trimmed to help provide a correct fit.

107. Kit includes the (2) RS5006 add-on position shocks. 109. For optimum system performance, we strongly recommend that this kit be used in conjunction with Rancho Torsion Bars. 110. RS619 torsion bar kit is required.

50. May need to reuse stock center pin, check length before disassembly.Add-A-Leaf may need to be drilled for larger stock center pin bolt.

112. Dana has no outer lip on the rear cover. Chrysler does have an outer on the rear cover.

51. Not recommended for XJ Cherokee or Comanche with 3 leaf springs.

114. For use on stock vehicle, use adaptor kit RS6614.

59. You must use soft-valved RS5000 shock absorbers listed.Corresponding RS9000X’s must be set on 1 or 2.

118. For installation of 339 tires use Bump Stop Spacer Kit RS744. 119. For installation of 339 tires use Bump Stop Spacer Kit RS8229.

60. Not recommended on vehicles without power steering. 61. Rear block kit, Part No. RS73044 may be required. If RS73044 is used, Shock RS5118 will be required.

120. Camber adjustment may not be possible on some raised vehicles. RS6406 coil springs will only work on raised vehicles. 122. Requires O.E. replacement bushings.

64. RS1902 adjustable torque rod S-link kit is required. 66. This kit does not fit vehicles which are equipped with factory high rider package (IRH) or vehicles with an aftermarket pitman arm with more than 1 1⁄49 off-set.

123. Most 92-96 fullsize 4WD Bronco and F-150 trucks are equipped with the lower mount of the factory quad shock option, which is needed to mount our RS97489, RS98508, RS5565 & RS5566 steering stabilizer systems.

70. RS5600 series shocks are 1 3⁄169 bore.

124. If vehicle has 2 1⁄29 wide leaf springs, use Bracket Kit RS50616.

77. RS1802 Kicker Shock fits 1984-1986 Toyota only after the removal of the welded-on bump stop striker plate located on the frame and installation of Rancho Bump Stop included in RS1802 Kit.

125. ’87 and newer may only restore stock height.

79. Our torsion bars are heavy duty to resist sag when adjusted to maximum height.Vehicle may not be raised, and rear Add-A-Leaf may not be needed. 80. Most CJ2A, CJ3A, CJ3B, MB, M38, M38A1 have a sideways U-type shackle which must be upgraded to plate-type shackle.Our shackle kit also includes the urethane bushings for your frame. Since stock bushings are usually worn, our shackle kit Part No. RS6636 is highly recommended (one kit per axle). 81. Front kit Part No. RS726 includes two tie rod ends Part No. RS7600. 83. Jeeps use stock location with no drilling. 84. This kit will not fit vehicles which have a vacuum servo mounted on drivers side of the front axle. 88. Kit includes front and rear U-bolts.

126. 460 gas with Super Cab or accessories like a winch, etc. Call for application. 128. Sway Bar Mount Spacer Kit No. RS8228 required with automatic transmission. 131. Height may be taller for non-race prepared vehicles. 114. Some earlier model vehicles requie newer alignment eccentrics. 132. These leaf springs do not come with bushings. Bushings are in front Kit RS6444. 133. Transfer case Lowering Kit No. RS6641 may be required on some vehicles. 134. Wranglers with 9Off-Road Suspension9 option (code AWE) will be 19 less. Also, vehicles with a hard top &/or a V-8 may not achieve full raised height. 135. Exhaust modification may be necessary.

89. Hole drilling or bracket modifications may be required on some vehicles.

139. DO NOT use with composite spring.

91. Kit includes both front and rear U-bolt kits.U-bolts are 9⁄169, you will have to drill your spring plates.

140. Use RS6676 Heavy Duty Upper & Lower Link System for improved cornering and overall handling characteristics on stock height vehicles.

92. Factory rear springs must have a flat measurement eye to eye of 529.Some heavy duty rear springs measure 569 flat and cannot be replaced.

142. Front upper and lower link kit, replacement for stock links.

95. Rancho rear block kit RS82054 may be required for this application. 96. This is a unique 2 leaf Add-A-Leaf system that raises the vehicle approximately 19- 29, depending upon options. 100. Except dual rear wheels 101. Rancho U-bolt Kit RS722 may be required if dual Add-A-Leaf’s are installed on 1980 and newer vehicles. 102. This system is only sold as a complete kit!Individual components will not be sold separately.For warranty of individual components, send

145. Optional Skid Plate Kit Part No. RS1625 is recommended for on/off road use, it will only fit with Rancho Suspension System. 146. Optional Upper Link Kit for added performance and handling. 148. Do not use with after market (stamped steel housing) ball joints. Use only with OE style (forged housing construction) upper ball joints. 149. This unit installs in an auxilliary position and may be used in conjunction with the O.E.M. position stabilizer. 150. This component is optional, and is recommended for optimum performance.

FOOTNOTES MUST BE READ! THEY CONTAIN IMPORTANT INFORMATION AND RECOMMENDATIONS PERTAINING TO CERTAIN APPLICATIONS.

201

Rancho Footnotes200-202 4/12/05 3:21 PM Page 202

Footnotes 152. This is a spring-seat shock absorber. 153. At this time, this system is NOT approved for installation on the following: vehicles with dual rear wheels, vehicles with a rear drive shaft carrier bearing, or vehicles equipped with a diesel engine. 154. Exhaust modification is required, check local laws regarding exhaust modification prior to installation.

2005 RANCHO 200. Steering arm may contact shock body on RS99113 & RS99119 on FJ43 & FJ45. Install shock boot towards ground for additional clearance. 201. On 1976-81 CJ5, CJ7, Scrambler 2 1⁄29 Suspension System RS99119 may be to short and you must use RS99113 with Bump Stop Kit No. RS8203. 202. Optional Skid Plate can be purchased separately. 203. RS6740 or RS6741 Bracket Kit includes four RS5298 shocks.

155. Part number RS40054S may be substituted for RS86206 applications. This spring will give a firmer ride and will have limited suspension travel. 156. These springs are not designed for hauling. 161. 95 and later Grand Cherokees (ZJ) front driveshaft replacement.Driveshafts that measure over 24 1⁄29, No change required. Driveshafts that measure from 209 up to 24 1⁄29, May require a change. Test drive vehicle, change to Spicer type if a vibration is present. Driveshafts that measure under 209, Must change to a Spicer type. CAUTION: VEHICLES WITH A DRIVESHAFT UNDER 209 MAY STILL EXPERIENCE A VIBRATION EVEN AFTER CHANGING TO A SPICERTYPE DRIVESHAFT.

205. Ford Superduties are equipped from the factory with either a “tall” (3.79) rear block or a “short” (1.99) rear block. Rancho offers three different choices to accomodate this option. 1. RS44154: Soft ride rear leaf spring is designed to add up to 1" of rear height. 2. R80053: Rear block kit adds 2 1⁄29 to rear height on vehicles equipped with the O.E. “short” block and 19 to vehicles equipped with O.E. “tall” bloack. 3. RS60642: Rear add-a-leaf kit is designed to add up to 2" of rear height. 206. Installation of this suspension system on 99 and later vehicle equipped with full-time 4WD (A4WD) may provide a slightly more noticeable level of driveline vibration.To offset any driveline vibration, replacement front driveshaft (part number 3191-1001) is available from: Powertrain Industries, Inc. 7532 Anthony Ave. Garden Grove, CA 92841.Toll Free: 1800-798-4585. Email: [email protected].

162. May substitute Add-A-Leaf RS60611 with 3 leaf rear spring (94-early 96 only).

207. Springs are not included with this system and must be ordered separately.

163. Spring Seat Shock included in front kit.

208. This system does not allow the reuse of O.E. factory 159 wheels.

167. See Shock Absorber Section for Shock Application. 173. 1996 & 1997 Model years REQUIRE 88025-REV. C or later installation instructions. 177. Remove and replace #2 leaf. 182. Has grease fittings.

209. New upper ball joints are not included with this suspension kit but are required to complete the installation, refernce instruction sheet for complete listing. 210. Some vehicles may experience a rear driveshalf vibration. A replacement rear double-cardan driveshaft for Rubicons only (part number 3394-0100) is available from: Powertrain Industries, Inc. 7532 Anthony Ave. Garden Grove, CA 92841.Toll Free: 1-800-798-4585. Email: [email protected].

184. 4 leaf only. 211. RS40054S may be used as a HD replacement. 185. Except 4000 lb front axle. 212. Adjustable height coil-over unit. 186. Will NOT Fit Vehicles with Rack and Pinion Steering. 213. Does not work on vehicles equipped with OE radiator skin plate. 187. Will NOT FIT vehicles with OE Pitman Arm YC35-3590-AA.This part number is on the Pitman Arm. 189. Will FIT vehicles with OE Pitman Arm YC35-3590-AA.This part number is on the Pitman Arm.

214. Does NOT fit vehicles equipped with the Off-Road Suspension package. A3. New Part Number Available Third Quarter PS. Rancho RS9000X Pro-Series shock absorber.

190. Aft Subframe Braces RS6643 are available for additional support for offroad use. 192. Front Driveshaft vibartion may occur in 4 W.D. only. A replacement driveshaft (part no. 3194-1000) is available from: Powertrain Industries, Inc. 7532 Anthony Ave. Garden Grove, CA 92841.Toll Free: 1-800-7984585. Email: [email protected]. 197. Ford F150’s which have a (“L” - shape bolt pattern for the transmission cross member must use the RS6489 Primary Suspension System; trangular bolt pattern use RS6488 Primary Suspension System.

Q2. Qty. Req. 2 Q4. Qty. Req. 4 •

New Part Number, Check availability before placing order.

a

Installation of this system does not allow the re-use of OE (factory) wheels.

199. This system cannot be used with any wheel with backspacing that exceeds 4.59 and/or the wheel diameter is less than 169. 202

FOOTNOTES MUST BE READ! THEY CONTAIN IMPORTANT INFORMATION AND RECOMMENDATIONS PERTAINING TO CERTAIN APPLICATIONS.