Robot Systems
LabVolt Series Datasheet
Festo Didactic en 220 V - 50 Hz 06/2018
Robot Systems, LabVolt Series
Table of Contents General Description _______________________________________________________________________2 Equipment Utilization Chart ________________________________________________________________3 Topic Coverage___________________________________________________________________________4 Features & Benefits _______________________________________________________________________4 List of Available Training Systems ___________________________________________________________4 Additional Equipment Required to Perform the Exercises ________________________________________4 Optional Equipment_______________________________________________________________________5 Available Training Systems_________________________________________________________________6 Equipment Description ____________________________________________________________________9 Optional Equipment Description __________________________________________________________ 1 1
General Description The Robot System is a complete and affordable training program for the programming and operation of industrial robots. Through the curriculum and hands-on experience with the Robot System, students learn to create automated work cells. The precision-built, articulated arm of the Robot represents an important step in automation and handling. A stepper motor, located in the base of the unit, provides horizontal rotation while five additional stepper motors, located in the shoulder, provide precision movements of the articulations and end effector. The Robot has five axes of rotation plus a gripper and is able to use all joints simultaneously to perform a programmed move sequence. Each articulation can be controlled and moved independently. Movements of the joints are accomplished by belts through a series of gears, while the gripper mechanism is activated by cables and belt-driven pulleys. The Robot System is available in two models: the Robot System, Model 5150-1, and the Robot System with Teach Pendant, Model 5150-2. The Robot System, Model 5150-1, can be controlled and programmed from a host computer running the RoboCIM 5150 Software. The Robot System with Teach Pendant, Model 5150-2, includes all the equipment of the Robot System, Model 5150-1, with the addition of a teach pendant that can be used to control and program the Robot. Optional devices include a Magnetic Gripper, a Rotary Carousel, Belt Conveyors, Gravity Feeders, Pneumatic Feeders, and a Signal Tower. The control/simulation software program – RoboCIM 5150 – provides students with a virtual environment and an easy-to-use interface allowing them to easily learn the fundamentals of robotics. The software gives students the opportunity to prepare their sequence within the 3D environment, simulate it, and then switch to control mode to perform the sequence with the real equipment. Both models come with student and instructor manuals, user guides, all leads and cables required to operate the system, and a solid-metal perforated Work Surface that can be put atop a regular work table or installed on one of the optional benches. Festo's modular approach allows connection with other equipment to further expand the training capabilities.
2
© Festo Didactic
Robot Systems, LabVolt Series
RoboCIM 5150 Software
The Robot and its optional external devices are equipped with location pins (or push-lock fasteners). These pins insert into the perforations of the metallic work surfaces. This easy-touse mechanism ensures the accurate positioning of the equipment when repeating programs.
Location pin on a Gravity Feeder
Robot Calibration Tools
Equipment Utilization Chart The following equipment is required to perform the practical sections of the included courseware. As the chart shows, some of the equipment is only required to perform particular units.
© Festo Didactic
3
Robot Systems, LabVolt Series
Topic Coverage • • • •
Introduction and Familiarization Programming Program Editing and Control Instructions Industrial Activity Simulation
Features & Benefits • • • • • • • • • •
Training program that allows easy learning of robotics basics Curriculum supported by a precision-built robot (six-step motor drives, two-finger gripper, power transferred from the stepper motor to the joints through mini HTP timing belts, etc.) Durable steel and aluminum construction that requires minimal maintenance Includes a large base that allows the robot to stay in place on a regular work table Provided with student and instructor manuals, user guides, and all required leads and cables Color-coded input and output connection ports for ease of setup Optional components allow the creation of personalized work cells Control/simulation software that uses 3D representations to simulate and control the mechanical and electrical characteristics of the equipment Available Robotics System Software Development Kit intended for developers who are interested in developing their own applications for the Robot System Can be provided in an optional solid protective carrying case
List of Available Training Systems Model number Robot System _________________________________________________________________________ 5150-15 Robot System with Teach Pendant ________________________________________________________ 5150-25
Qty Description 1 1
Additional Equipment Required to Perform the Exercises
4
© Festo Didactic
Robot Systems, LabVolt Series
Model number Rotary Carousel ________________________________________________________________________ 5113-10 1 Belt Conveyor _________________________________________________________________________ 5118-05 2 Gravity Feeder for Square Parts ___________________________________________________________ 5119-00 3 Gravity Feeder for Cylindrical Parts ________________________________________________________ 5121-00 4 Pneumatic Feeder Kit for Square Parts ____________________________________________________ 5122-A5 5 Pneumatic Feeder Kit for Cylindrical Parts __________________________________________________ 5142-A5 6 Personal Computer _____________________________________________________________________ 8990-05 7 Training on Computer-Controlled Robot System, 0.4 day _____________________________________ 34431-TF 8
Qty Description 1 1 1 1 1 1 1 1
Optional Equipment Model number Microswitch ___________________________________________________________________________ 5102-10 Magnetic Gripper _______________________________________________________________________ 5111-00 Storage Case __________________________________________________________________________ 5167-00 RoboCIM 5150 Software (International Market) - 1 User _______________________________________ 5173-P0 9 Robotics System Software Development Kit _________________________________________________ 5174-00 Belt Conveyor _________________________________________________________________________ 5210-05 Signal Tower Kit with Control Relay ________________________________________________________ 5924-B0 Storage/Work Surface __________________________________________________________________ 6309-00 Air Compressor ________________________________________________________________________ 6410-C5 Location Tray _________________________________________________________________________ 38685-00 Spacer ______________________________________________________________________________ 39035-00 Work Bench for 1 Work Surface __________________________________________________________ 46601-10 Work Bench for 2 Work Surfaces _________________________________________________________ 46601-20 Work Bench for 3 Work Surfaces _________________________________________________________ 46601-30 Square Part - Plexiglass ________________________________________________________________ 96474-00 Square Part - Wax _____________________________________________________________________ 96942-00
Qty Description 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
1 Required only to perform Unit 6 (Optional Industrial Application 3) of the courseware. 2 Required only to perform Units 8 and 9 (Optional Industrial Applications 5 and 6) of the courseware. 3 Required only to perform Unit 7 (Optional Industrial Application 4) of the courseware. Alternately, this item can be replaced by Models 5121, 5122-
A, or 5142-A. 4 Required only to perform Unit 7 (Optional Industrial Application 4) of the courseware. Alternately, this item can be replaced by Models 5119, 5122-
A, or 5142-A. 5 Required only to perform Unit 7 (Optional Industrial Application 4) of the courseware. Alternately, this item can be replaced by Models 5119, 5121,
or 5142-A. The Pneumatic Feeder Kit requires compressed air. The Air Compressor, Model 6410-C, is available in the Optional Equipment for this purpose. 6 Required only to perform Unit 7 (Optional Industrial Application 4) of the courseware. Alternately, this item can be replaced by Models 5119, 5121,
or 5122-A. The Pneumatic Feeder Kit requires compressed air. The Air Compressor, Model 6410-C, is available in the Optional Equipment for this purpose. 7 Refer to the Computer Requirements in the System Specifications section of this datasheet if the computer is to be provided by the end-user. 8 Optional product training. Price provided on demand. For details and options, contact
[email protected]. 9 Additional software license for 1 user.
© Festo Didactic
5
Robot Systems, LabVolt Series
Available Training Systems Robot System 5150-15 The Robot System provides complete and affordable training in the programming and operation of industrial robots. Through the curriculum and hands-on experience with the Robot System, students learn to create automated work cells. The Robot System can be controlled and programmed from a host computer running the RoboCIM 5150 Software. The precision-built, articulated arm of the Robot represents an important step in automation and handling. A stepper motor, located in the base of the unit, provides horizontal rotation while five additional stepper motors, located in the shoulder, provide precision movements of the articulations and end effector. The Robot has five axes of rotation plus a gripper and is able to use all joints simultaneously to perform a programmed move sequence. Each articulation can be controlled and moved independently. Movements of the joints are accomplished by belts through a series of gears, while the gripper mechanism is activated by cables and belt-driven pulleys. The base of the unit includes one connector for an external stepper motor which can be used for further experimentation, such as operating the Rotary Carousel. The Robot System comes with the RoboCIM 5150 Software which allows students to control or simulate the motion of the Robot. The software provides a three-dimensional, virtual environment and an easy-to-use interface allowing students to easily learn the fundamentals of robotics. This training system includes student and instructor manuals, user guides, all leads and cables required to operate the system, and a solid-metal perforated Work Surface that can be put atop a regular work table or installed on one of the optional benches. Many optional devices can be added to the system to perform more complex tasks. The optional devices include a Magnetic Gripper, a Rotary Carousel, Belt Conveyors, Gravity Feeders, Pneumatic Feeders, and a Signal Tower.
List of Equipment Model number Work Surface - Large ___________________________________________________________________ 46604-00 Power Supply __________________________________________________________________________ 5105-05 Robot ________________________________________________________________________________ 5150-A0
Qty Description 1 1 1
List of Manuals Manual number RoboCIM 5150 Software (User Guide) _________________________________________________________ 39376-E0 Introduction to Robotics (Student Manual) _____________________________________________________ 39411-00 Introduction to Robotics (Instructor Guide) _____________________________________________________ 39411-10 Robot System (User Guide) _________________________________________________________________ 39411-E0 Description
6
© Festo Didactic
Robot Systems, LabVolt Series
Table of Contents of the Manual(s) Introduction to Robotics (Student Manual) (39411-00) • 1-1 Control of the Robot, Using RoboCIM • 1-2 Control of the Robot, Using the Teach Pendant • 2-1 Programming, Using RoboCIM • 2-2 Programming, Using the Teach Pendant • 3-1 Program Editing, Using RoboCIM • 3-2 Program Editing, Using the Teach Pendant • 4-0 Industrial Application 1 • 5-0 Industrial Application 2 • 6-0 Industrial Application 3 • 7-0 Industrial Application 4 • 8-0 Industrial Application 5 • 9-0 Industrial Application 6
Optional Equipment Model number Installation and Commissioning of a 5150-1 System ________________________________________ 51501-IC 10
Qty Description 1
System Specifications Parameter
Value
Physical Characteristics Intended Location
On a table able to support the weight of the equipment
Dimensions (H x W x D)
800 x 590 x 890 mm (31.5 x 23.2 x 35 in)
Net Weight
TBE
Robot System with Teach Pendant 5150-25 The Robot System provides complete and affordable training in the programming and operation of industrial robots. The Robot System with Teach Pendant includes all the equipment of the Robot System, Model 5150-1, with the addition of a teach pendant that can be used to control and program the Robot. The precision-built, articulated arm of the Robot represents an important step in automation and handling. A stepper motor, located in the base of the unit, provides horizontal rotation while five additional stepper motors, located in the shoulder, provide precision movements of the articulations and end effector. The Robot has five axes of rotation plus a gripper and is able to use all joints simultaneously to perform a programmed move sequence. Each articulation can be controlled and moved independently. Movements of the joints are accomplished by belts through a series of gears, while the gripper mechanism is activated by cables and belt-
10 Installation and basic commissioning of the equipment in your classroom. Installer fees (flight, accommodation...) must be added to the price. The
product (box(es) and/or pallet(s)) must already be in the classroom or extra charges will apply. For details or other options, contact "
[email protected]". © Festo Didactic
7
Robot Systems, LabVolt Series
driven pulleys. The base of the unit includes one connector for an external stepper motor which can be used for further experimentation, such as operating the Rotary Carousel. The Robot System comes with the RoboCIM 5150 Software which allows students to control or simulate the motion of the Robot. The software provides a three-dimensional, virtual environment and an easy-to-use interface allowing students to easily learn the fundamentals of robotics. This training system includes student and instructor manuals, user guides, all leads and cables required to operate the system, and a solid-metal perforated Work Surface that can be put atop a regular work table or installed on one of the optional benches. Many optional devices can be added to the system to perform more complex tasks. The optional devices include a Magnetic Gripper, a Rotary Carousel, Belt Conveyors, Gravity Feeders, Pneumatic Feeders, and a Signal Tower.
List of Equipment Model number Work Surface - Large ___________________________________________________________________ 46604-00 Power Supply __________________________________________________________________________ 5105-05 Teach Pendant _________________________________________________________________________ 5106-00 Robot ________________________________________________________________________________ 5150-A0
Qty Description 1 1 1 1
List of Manuals Manual number RoboCIM 5150 Software (User Guide) _________________________________________________________ 39376-E0 Introduction to Robotics (Student Manual) _____________________________________________________ 39411-00 Introduction to Robotics (Instructor Guide) _____________________________________________________ 39411-10 Robot System (User Guide) _________________________________________________________________ 39411-E0 Description
Table of Contents of the Manual(s) Introduction to Robotics (Student Manual) (39411-00) • 1-1 Control of the Robot, Using RoboCIM • 1-2 Control of the Robot, Using the Teach Pendant • 2-1 Programming, Using RoboCIM • 2-2 Programming, Using the Teach Pendant • 3-1 Program Editing, Using RoboCIM • 3-2 Program Editing, Using the Teach Pendant • 4-0 Industrial Application 1 • 5-0 Industrial Application 2 • 6-0 Industrial Application 3 • 7-0 Industrial Application 4 • 8-0 Industrial Application 5 • 9-0 Industrial Application 6
Optional Equipment
8
© Festo Didactic
Robot Systems, LabVolt Series
Model number Installation and Commissioning of a 5150-2 System ________________________________________ 51502-IC 11
Qty Description 1
System Specifications Parameter
Value
Physical Characteristics Intended Location
On a table able to support the weight of the equipment
Dimensions (H x W x D)
800 x 590 x 890 mm (31.5 x 23.2 x 35 in)
Net Weight
TBE
Equipment Description Power Supply 5105-05 The Power Supply converts the ac line voltage into a 13.8-V dc voltage that is used to power the Robot, Model 5150A. The Power Supply has current limiting and overvoltage protection.
Specifications Parameter
Value
Power Requirement Service Installation
Standard-single phase ac outlet
Current
2A
Output
13.8 V – 10 A – DC
Protection
Current limiting/overvoltage
Physical Characteristics Dimensions (H x W x D)
57 x 152 x 248 mm (2.3 x 6.0 x 9.8 in)
Net Weight
1.2 kg (2.7 lb)
11 Installation and basic commissioning of the equipment in your classroom. Installer fees (flight, accommodation...) must be added to the price. The
product (box(es) and/or pallet(s)) must already be in the classroom or extra charges will apply. For details or other options, contact "
[email protected]". © Festo Didactic
9
Robot Systems, LabVolt Series
Teach Pendant 5106-00 The Teach Pendant is a hand-held terminal that can be used to control the Robot instead of using a computer. It has a four-line, twenty-character LCD display for feedback to the operator. The programs created with the Teach Pendant can be uploaded from (or downloaded to) a computer through a USB connection using the included 5150 File Server Application.
Specifications Parameter
Value
Physical Characteristics Dimensions (H x W x D)
35 x 103 x 194 mm (1.4 x 4.1 x 7.6 in)
Net Weight
0.4 kg (0.8 lb)
Robot 5150-A0 The Robot has five axes of rotation plus a gripper. It is driven by stepper motors that provide precision movements of the articulations. All joints can be used simultaneously to perform a programmed move sequence. Movements of the joints are accomplished by belts through a series of gears, while the gripper mechanism is activated by cables and belt-driven pulleys. The Robot comes with a large base which allows it to be placed on a regular work table.
Specifications Parameter
Value
Load Capacity
0.44 kg (15.6 oz)
Number of Axes of Rotational Freedom
5
Reach
432 mm (17 in)
Repeatability
3.2 mm (0.125 in)
Maximum Speed
152 mm/s (6 in/s)
Actuators Type
10
DC stepper motor
© Festo Didactic
Robot Systems, LabVolt Series
Parameter
Value
Number of steps per revolution
200
Transmission
Gears and timing belts
Working Envelope Base
338°
Shoulder Joint
181°
Elbow Joint
198°
Pitch Joint
185°
Roll Joint
360°
Power Input Voltage
13.8 V – DC
Device Outputs Number
4
Voltage
12 V – DC
Maximum Current
0.6 A
TTL Outputs Number
4
Level
0-5 V – DC, TTL compatible
Maximum Current
0.02 A
End Effector
Two-finger gripper
Physical Characteristics Dimensions (H x W x D)
TBE
Net Weight
9.3 kg (20.6 lb)
Work Surface - Large 46604-00 The Work Surface - Large is a perforated metal surface on which the equipment can be installed. The Work Surface can be put atop a regular work table or on one of the optional benches.
Specifications Parameter
Value
Physical Characteristics Dimensions (H x W x D)
41 x 883 x 584 mm (1.6 x 34.75 x 23 in)
Net Weight
7.3 kg (16.2 lb)
Optional Equipment Description Microswitch (Optional) 5102-10 The Microswitch is an SPDT switch with a wireform actuator. The Microswitch can be used alone or can be installed on a belt conveyor.
Specifications
© Festo Didactic
11
Robot Systems, LabVolt Series
Parameter
Value
Switch Type
Momentary
Actuator
Wireform
Contacts
SPDT, 12 V - 0.06 A - DC
Magnetic Gripper (Optional) 5111-00 The Magnetic Gripper can be fixed to the wrist of the Robot in place of the two-finger gripper. The electromagnet is powered via the external device output connector mounted on the shoulder of the Robot. The Magnetic Gripper comes with a connection cable and an installation guide.
Manual Manual number Magnetic Gripper Model 5111 (User Guide) ____________________________________________________ 93379-00 Description
Additional Equipment Required to Perform the Exercises Model number Training on Magnetic Gripper Model 5111 - Installation Instructions, 0.3 day ____________________ 93379-TF 12
Qty Description 1
Specifications Parameter
Value
Holding Force
0.9 kg (2 lb)
Physical Characteristics Magnet Diameter
19 mm (0.75 in)
Net Weight
0.3 kg (0.7 lb)
Rotary Carousel (Optional) 5113-10 The Rotary Carousel is used to demonstrate how parts can be transferred to and from a robot in a repetitive, rotational pattern. Its platter is driven by a dc servo motor. The carousel has a closed loop feedback system and a limit switch feedback for hard home capabilities. The operation of the Rotary Carousel is controlled by the Robot Controller.
12 Optional product training. Price provided on demand. For details and options, contact
[email protected].
12
© Festo Didactic
Robot Systems, LabVolt Series
Specifications Parameter
Value
Platter Diameter
298 mm (11.7 in)
Motor
DC stepper motor
Switch Type
Momentary
Actuator
Wireform
Contacts
SPDT, 12 V – 0.06 A – DC
Physical Characteristics Dimensions (H x W x D)
114 x 350 x 298 mm (4.5 x 13.8 x 11.7 in)
Net Weight
3.2 kg (7.1 lb)
Belt Conveyor (Optional) 5118-05 The Belt Conveyor is used in materialhandling experiments. It has a selfcontained power supply and interface electronics. The control panel has inputs for interfacing with the Robot Controller. The inputs enable the conveyor to be remotely controlled. It can also be used as a stand-alone unit. The Belt Conveyor comes with a movable limit switch to detect the presence of parts on the belt. The conveyor belt has a length of 1880 mm (74 in) and a width of 127 mm (5 in).
Specifications Parameter
Value
Motor
DC stepper motor
Conveyor Belt Length
959 mm (37.8 in)
Width
102 mm (4 in)
Inputs Number
3 (to control motor operation, engage/disengage motors, direction)
Type
TTL input
Switch (movable) Type
Momentary
Actuator
Wireform
Contacts
SPDT, 12 V – 0.06 A – DC
Physical Characteristics Dimensions (H x W x D)
165 x 965 x 260 mm (6.5 x 38 x 10.3 in)
Net Weight
8.4 kg (18.6 lb)
© Festo Didactic
13
Robot Systems, LabVolt Series
Gravity Feeder for Square Parts (Optional) 5119-00 The Gravity Feeder for Square Parts is designed to feed square parts. It has a sensor switch and feedback cables for connection to the Robot Controller.
Specifications Parameter
Value
Storage Capacity
6 square parts
Part Characteristics Dimensions
51 x 51 mm (2 x 2 in)
Thickness
13-38 mm (0.5-1.5 in)
Switch Type
Momentary
Actuator
Wireform
Contacts
SPDT, 12 V – 0.06 A – DC
Physical Characteristics Dimensions (H x W x D)
279 x 203 x 241 mm (11 x 8 x 9.5 in)
Net Weight
2.1 kg (4.7 lb)
Gravity Feeder for Cylindrical Parts (Optional) 5121-00 The Gravity Feeder for Cylindrical Parts is designed to feed small cylindrical parts. It has a sensor switch and feedback cables for connection to the Robot Controller.
Specifications Parameter
Value
Storage Capacity
8 cylindrical parts
Parts Characteristics
14
© Festo Didactic
Robot Systems, LabVolt Series
Parameter
Value
Dimensions (Length x Diameter)
51 x 35 mm (2 x 1.375 in)
Switch Type
Momentary
Actuator
Wireform
Contacts
SPDT, 12 V – 0.06 A – DC
Physical Characteristics Dimensions (H x W x D)
279 x 203 x 241 mm (11 x 8 x 9.5 in)
Net Weight
2.1 kg (4.7 lb)
Pneumatic Feeder Kit for Square Parts (Optional) 5122-A5 The Pneumatic Feeder Kit for Square Parts is designed to feed square parts and includes a pneumatic feeder and controller. It consists of storage and feeder sections and a pneumatic cylinder. Both sections have microswitches to send feedback to the Pneumatic Feeder Controller. When the Pneumatic Feeder Controller detects that the feeder section is empty, it supplies compressed air to the pneumatic cylinder to push a part from the storage section into the feeder section.
Specifications Parameter
Value
Storage Capacity
10 square parts
Part Characteristics Dimensions (H x W x D)
51 x 51 x 13 mm (2 x 2 x 0.5 in)
Switch Type
Momentary
Actuator
Standard-type, integral-hinged lever
Contacts
SPDT, 12 V – 0.06 A – DC
Pneumatic Cylinder Type
Double-acting cylinder
Stroke
76 mm (3 in)
Bore Size
19 mm (0.75 in)
Physical Characteristics Dimensions (H x W x D)
190 x 292 x 60 mm (7.5 x 11.5 x 2.375 in)
Net Weight
1.4 kg (3.1 lb)
© Festo Didactic
15
Robot Systems, LabVolt Series
Pneumatic Feeder Kit for Cylindrical Parts (Optional) 5142-A5 This Pneumatic Feeder Kit for Cylindrical Parts is designed to feed cylindrical parts and includes a Pneumatic Feeder (Cylindrical Parts) and controller. It consists of storage and feeder sections and a pneumatic cylinder. Both sections have microswitches to send feedback to the Pneumatic Feeder Controller. When the Pneumatic Feeder Controller detects that the feeder section is empty, it supplies compressed air to the pneumatic cylinder to push a part from the storage section into the feeder section.
Specifications Parameter
Value
Storage Capacity
8 cylindrical parts
Part Characteristics Dimensions (Length x Diameter)
63.5 x 19 mm (2.5 x 0.75 in)
Switch Type
Standard-type, integral-hinged lever
Actuator
Momentary
Contacts
SPDT, 12 V – 0.06 A – DC
Pneumatic Cylinder Type
Double-acting cylinder
Stroke
76 mm (3 in)
Bore Size
19 mm (0.75 in)
Physical Characteristics Dimensions (H x W x D)
241 x 292 x 70 mm (9.5 x 11.5 x 2.75 in)
Net Weight
1.4 kg (3.1 lb)
Storage Case (Optional) 5167-00 The Storage Case is a molded case designed to transport and protect the Robot System. The Storage Case is impact-resistant and its interior is padded with foam specially cut to match the Robot shape.
16
© Festo Didactic
Robot Systems, LabVolt Series
Specifications Parameter
Value
Physical Characteristics Inner Dimensions (H x W x D)
241 x 673 x 381 mm (9.5 x 26.5 x 15 in)
Outer Dimensions (H x W x D)
254 x 699 x 406 mm (10 x 27.5 x 16 in)
Net Weight
6.4 kg (14.2 lb)
RoboCIM 5150 Software (International Market) - 1 User (Optional) 5173-P0 The RoboCIM 5150 Software is used to simulate and control the operation of the Robot System, Model 5150, and optional external devices such as Gravity Feeders and Belt Conveyors. One of the key features of the RoboCIM 5150 Software is that it simulates the actual equipment with three-dimensional representations. Sophisticated mathematical models accurately simulate the mechanical and electrical characteristics of the equipment. The RoboCIM 5150 Software allows users to interactively control and view the motion of the system. Programs can be created with the RoboCIM 5150 Software to control the equipment using either the text programming mode or the icon programming mode.
Manual Manual number RoboCIM 5150 Software (User Guide) _________________________________________________________ 39376-E0 Description
Additional Equipment Required to Perform the Exercises Model number Training on RoboCIM 5150 Software, 0.5 day ______________________________________________ 39376-TF 13 Training on Introduction to Robotics, 0.6 day ______________________________________________ 39411-TF 14
Qty Description 1 1
13 Optional product training. Price provided on demand. For details and options, contact
[email protected]. 14 Optional product training. Price provided on demand. For details and options, contact
[email protected].
© Festo Didactic
17
Robot Systems, LabVolt Series
Robotics System Software Development Kit (Optional) 5174-00 The Robotics System Software Development Kit (SDK) is intended for developers who are interested in developing their own applications for the Robot System. It includes a CDROM with all the files required to use the dynamic-link library (DLL) as an abstraction layer between the enduser application and the low-level communication protocol from and to the USB Controller. The Robotics System Software Development Kit comes with a User Guide giving the details of each function in the library. However, since the Robotics System Software Development Kit is intended for developers, no instructional material is provided.
Manual Manual number 5150 Robotics System Software Development Kit (User Guide) ____________________________________ 39644-E0 Description
Specifications Parameter Computer Requirements
Value A currently available personal computer running under one of the following operating systems: Windows® 7 or Windows® 8.
Belt Conveyor (Optional) 5210-05 The Belt Conveyor is used in materialhandling experiments. It has a selfcontained power supply and interface electronics. The control panel has inputs for interfacing with the Robot Controller. The inputs enable the conveyor to be remotely controlled. It can also be used as a stand-alone unit. The Belt Conveyor comes with a movable limit switch to detect the presence of parts on the belt.
Specifications Parameter
Value
Motor
18
Type
DC servo motor with closed-loop control
Encoder
Optical
© Festo Didactic
Robot Systems, LabVolt Series
Parameter
Value
Conveyor Belt Length
1880 mm (74 in)
Width
127 mm (5 in)
Inputs Number
3 (to control motor operation, engage/disengage motors, direction)
Type
TTL Input
Switch (Movable) Type
Momentary
Actuator
Wireform
Contacts
SPDT, 12 V – 0.06 A – DC
Physical Characteristics Dimensions (H x W x D)
165 x 1892 x 279 mm (6.5 x 74.5 x 11 in)
Net Weight
14.4 kg (31.8 lb)
Signal Tower Kit with Control Relay (Optional) 5924-B0 The Signal Tower Kit with Control Relay is one of the available external accessories for the Servo Robot, Model 5150. The signal tower consists of three lights displaying visual signals that indicate the Robot Controller states. Up to five light modules can be stacked one upon another. Each module can be programmed without the need for special wiring or tools. The DC Power Supply, Model 6360, and Connection Leads, Model 5259-C, required to operate the Signal Tower, are included, as well as a Control Relay used to control external devices. It consists of a relay (12 V dc solenoid and DPDT contacts) and connecting cables.
Storage/Work Surface (Optional) 6309-00 The Storage/Work Surface is a perforated metal plate on which the equipment is placed. Two work surfaces can be joined using Spacers, Model 39035.
Specifications Parameter
Value
Physical Characteristics Dimensions (H x W x D)
30 x 590 x 590 mm (1 x 23 x 23 in)
Net Weight
5 kg (11 lb)
© Festo Didactic
19
Robot Systems, LabVolt Series
Air Compressor (Optional) 6410-C5 The Air Compressor is a quiet device well suited for classroom and school laboratories. The Air Compressor can be used to provide compressed air to different components. A conditioning unit, Model 6411-A, must be connected to the compressor for certain applications. The Circulator Pump is available in different variants depending on ac power network voltages and frequencies. Because of this, the actual module may vary from the one shown in the picture.
Specifications Parameter
Value
Power Requirements Current
3.4 A
Service Installation
Standard single-phase ac outlet
Tank Capacity
30 L (6.6 gal)
Flow Rate
50 L/min at 620 kPa (1.8 SCFM at 90 psi)
Maximum Pressure
800 kPa (120 psi)
Noise Level
58 dB(A)
Physical Characteristics Dimensions (H x W x D)
TBE
Net Weight
37 kg (81.6 lb)
Personal Computer (Optional) 8990-05 The Personal Computer consists of a desktop computer running under Windows® 10. A monitor, keyboard, and mouse are included.
Specifications 20
© Festo Didactic
Robot Systems, LabVolt Series
Parameter
Value
Power Requirements Current
1.05 A
Service Installation
Standard single-phase ac outlet
Location Tray (Optional) 38685-00 The Location Tray is a solid metal apparatus designed to help position square parts manipulated with the Servo Robot. When a part is dropped on the Location Tray it automatically aligns in the square-stamped center. The Location Tray is equipped with push-lock fasteners allowing it to clamp to the work surface.
Specifications Parameter
Value
Physical Characteristics Dimensions (H x W x D)
12.3 x 120 x 120 mm (0.5 x 4.7 x 4.7 in)
Net Weight
49 g (1.7 oz)
Spacer (Optional) 39035-00 The Spacer is a small metal piece with four push-lock fasteners that can be used to join two perforated work surfaces.
Specifications Parameter
Value
Physical Characteristics Dimensions (H x W x D)
20 x 120 x 70 mm (0.8 x 4.7 x 2.8 in)
Net Weight
169 g (6 oz)
© Festo Didactic
21
Robot Systems, LabVolt Series
Work Bench for 1 Work Surface (Optional) 46601-10 The Work Benches, Models 46601-1, 46601-2, and 46601-3, are solid metal benches that can accommodate one, two, and three work surfaces, respectively. The work surfaces are not included with the Work Benches. Each bench is mounted on four heavyduty, swivelling, lockable casters. Optional equipment is available for each bench.
Additional Equipment Required to Perform the Exercises Model number Work Surface - Large ___________________________________________________________________ 46604-00
Qty Description 1
Specifications Parameter
Value
Physical Characteristics Dimensions (H x W x D)
932 x 898 x 595 mm (36.7 x 35.4 x 23.4 in)
Net Weight
TBE
Work Bench for 2 Work Surfaces (Optional) 46601-20 The Work Benches, Models 46601-1, 46601-2, and 46601-3, are solid metal benches that can accommodate one, two, and three work surfaces, respectively. The work surfaces are not included with the Work Benches. Each bench is mounted on four heavyduty, swivelling, lockable casters. Optional equipment is available for each bench.
Additional Equipment Required to Perform the Exercises Model number Work Surface - Large ___________________________________________________________________ 46604-00
Qty Description 2
Specifications
22
© Festo Didactic
Robot Systems, LabVolt Series
Parameter
Value
Physical Characteristics Dimensions (H x W x D)
932 x 1796 x 595 mm (36.7 x 70.7 x 23.4 in)
Net Weight
TBE
Work Bench for 3 Work Surfaces (Optional) 46601-30 The Work Benches, Models 46601-1, 46601-2, and 46601-3, are solid metal benches that can accommodate one, two, and three work surfaces, respectively. The work surfaces are not included with the Work Benches. Each bench is mounted on four heavyduty, swivelling, lockable casters. Optional equipment is available for each bench.
Additional Equipment Required to Perform the Exercises Model number Work Surface - Large ___________________________________________________________________ 46604-00
Qty Description 3
Specifications Parameter
Value
Physical Characteristics Dimensions (H x W x D)
932 x 1796 x 895 mm (36.7 x 70.7 x 35.3 in)
Net Weight
TBE
Square Part - Plexiglass (Optional) 96474-00 The Square Part - Plexiglass is a block of clear plexiglass used for various manipulations with the Servo Robot, Model 5250.
Specifications Parameter
Value
Physical Characteristics Dimensions (H x W x D)
13 x 51 x 51 mm (0.5 x 2 x 2 in)
Net Weight
39 g (1.4 oz)
Square Part - Wax (Optional) 96942-00 The Square Part - Wax is a block of blue File-A-Wax used for various manipulations with the Servo Robot, Model 5250.
Specifications Parameter
Value
Physical Characteristics Dimensions (H x W x D)
13 x 51 x 51 mm (0.5 x 2 x 2 in)
Net Weight
31 g (1.1 oz)
© Festo Didactic
23
Robot Systems, LabVolt Series
Reflecting the commitment of Festo Didactic to high quality standards in product, design, development, production, installation, and service, our manufacturing and distribution facility has received the ISO 9001 certification. Festo Didactic reserves the right to make product improvements at any time and without notice and is not responsible for typographical errors. Festo Didactic recognizes all product names used herein as trademarks or registered trademarks of their respective holders. © Festo Didactic Inc. 2018. All rights reserved.
Festo Didactic SE Rechbergstrasse 3 73770 Denkendorf Germany P. +49(0)711/3467-0 F. +49(0)711/347-54-88500 Festo Didactic Inc. 607 Industrial Way West Eatontown, NJ 07724 United States P. +1-732-938-2000 F. +1-732-774-8573 Festo Didactic Ltée/Ltd 675 rue du Carbone Québec QC G2N 2K7 Canada P. +1-418-849-1000 F. +1-418-849-1666 www.labvolt.com www.festo-didactic.com
24
© Festo Didactic