REMOVE DANGEROUS DIESEL EXHAUST

FROM YOUR STATION

REMOVE THE DANGERS OF DIESEL EXHAUST

Hazardous vehicle exhaust emissions in the fire station are a firefighter’s most significant cancer health risk and a serious legal liability for the fire department. Eliminate this hazard from your firehouse with Plymovent® Exhaust Capture and Removal Systems. From existing stations to new design-built, our totally automatic start-up and disconnect Source Capture Systems are the recommended method for controlling exhaust emissions at your station, city or town. PLYMOVENT SOURCE CAPTURE SYSTEMS – AN INDUSTRY STANDARD Plymovent’s philosophy is to provide quality systems that are safe, user-friendly, code compliant(1) and that will enhance the quality of life for your firefighters and personnel.That’s why we’ve developed a line of Source Capture Systems designed to meet your station’s needs: F

Under Carriage Track Systems – for single bay applications

F

Under Carriage Rail Systems – for drive through bays with up to four vehicles

F

Vertical Exhaust Systems – for vehicles with overhead exhaust stacks

Each system is designed to remove hazardous exhaust to provide a healthier working environment. A key component to our systems is our sealed nozzle designs, the Grabber®. Simple to use, either our Pneumatic or Magnetic just attach the Grabber to the tailpipe ensuring a positive seal around the tailpipe, capturing and eliminating the chance that dangerous exhaust fumes will escape back into your station. With the Grabber, the Plymovent system can meet NIOSH (National Institute for Occupational Safety and Health) and NFPA (National Fire Protection Association) recommended occupational exposure to carcinogens.(2)

THE DANGERS OF DIESEL EXHAUST The EPA has determined that the median diesel exhaust particle size is 0.2 microns and is typically not visible to the human eye – making diesel exhaust particles often smaller than what can be captured in on-board filters. In addition, toxic gases are not captured by particulate filters, and only partially by activated carbon filters.The Plymovent Source Capture System captures these particles and gases before they enter the station, and expels them to the outside.

(1) (2)

Plymovent system is code compliant to IMC, UMC, NEC codes when system is properly designed, operated, serviced and maintained. The operation of exhaust extraction systems can be affected by various factors including proper design of the system, operating procedures, and service and maintenance. Exposure levels should be checked upon installation and periodically thereafter to ensure that they fall within applicable NIOSH and NFPA exposure limit values.

UNDER CARRIAGE TRACK SYSTEMS The Plymovent Sliding Balancer Track System (SBT) has set the standard for vehicle emissions control for fire and emergency response vehicles around the world. The SBT system is the preferred system for back-in and drive through apparatus bays, and is designed to connect to any motor vehicle tailpipe while capturing virtually 100% of the exhaust emissions. Completely code compliant(1), the SBT system is used in single, back-in bay applications where the vehicle tailpipe is within 60 feet of the door. Plus, it’s a fully automatic system, including fan activation and system disconnect from the exiting vehicle. All that is required is a one-step connection to the vehicle’s tailpipe as it enters the station. If you are looking for an exhaust removal system that you can connect at the door and have it automatically disconnect when you leave, the SBT is the right fit for your application. KEY SBT SYSTEM ADVANTAGES: F

Models handle up to 60-foot deep back-in bays

F

Auto-disconnect at the exit door

F

Virtually 100% source capture through Plymovent's unique Grabber nozzles

F

Automatic start-stop of fan by an exhaust sensor

F

No minimum or maximum exit speed

F

Aluminum track – lightweight and strong

F

(1)

End stops with rubber shock absorbers take up kinetic energy from trolleys

F

Adjustable release points depending on the exit speed of the vehicle

F

Pre-fitted yellow/black extraction hose

F

Grabbers attach from the vertical position

F

F

Safety disconnect coupling; fail safe system, easily re-connectable Suitable for existing fire stations and new design-built stations

Plymovent system is code compliant to IMC, UMC, NEC codes when system is properly designed, operated, serviced and maintained.

UNDER CARRIAGE RAIL SYSTEMS The Plymovent Straight Rail System (STR) is the preferred system for drive through apparatus bays. Designed to connect to any motor vehicle tailpipe, the STR captures virtually 100% of the exhaust emissions. This system is ideal for drive through bays or bays with up to four vehicles parked in tandem.There is a one-step connection to the system as the vehicle enters the station. Everything within the system is automatic, from the fan activation to the automatic release from the exiting vehicle. Also, the STR system is code compliant(1), and has solid one-piece extruded aluminum rail profiles offering strength and durability. KEY STR SYSTEM ADVANTAGES: F

Models to handle up to 150 feet

F

Exhaust hose sizes for all vehicle types

F

Auto-disconnect at exit door

F

F

Door-to-door removal of harmful emissions

F

F

Speed absorbing shock system

F

Front and optional back-out release

F

Expandable design

F

F

F

F

Allows for up to four vehicle connections in tandem

F

Adjustable release points for various exiting speeds Automatic start-stop of fan by an exhaust sensor Virtually 100% source capture through Plymovent's unique Grabber nozzles Pre-fitted yellow/black extraction hose Safety disconnect coupling; fail safe system, easily re-connectable Suitable for existing fire stations and new design-built stations

HERE’S WHAT THE EXPERTS HAVE TO SAY IMC (International Mechanical Code): “Source Capture System is a mechanical exhaust system designed and constructed to capture air contaminants at their source and exhaust such contaminants to the outdoor atmosphere.” NIOSH (National Institute for Occupational Safety and Health): “There can be no safe level of exposure

to a carcinogen” and “exposures to carcinogens should be limited to the lowest feasible concentration.” OSHA (Occupational Safety and Health Administration): “Install local exhaust ventilation that removes harmful fumes at their source – hose to tailpipe or stack exhaust.”

VERTICAL EXHAUST SYSTEMS The Plymovent Vertical Stack Rail System (VSR) is the solution for vehicles that have top exhaust stacks and need to move through an apparatus bay. With no operator intervention needed, the “V” shaped catcher guides the vehicle exhaust stack into the rail profile.The VSR system’s rail profile is comprised of solid one-piece extruded aluminum to provide strength and durability.The free-floating capability allows side-to-side movement of the entire system and automatically aligns itself with the vehicle’s exhaust stack.The VSR system is completely code compliant(1) and fully automated from fan start to disconnect.

KEY VSR SYSTEM ADVANTAGES: F

A fully automatic system

F

Lateral movement to either side

F

Virtually 100% source capture

F

Flexible duct connection

F

Floating suspension

F

Sealing rubber lips

F

Adjustable capture stack

F

Automatic return to position after exit

F

Fits any vehicle stack

F

Secure wire; fail-safe

F

One-piece aluminum rail

F

F

Expandable system to almost any length

F

Suitable for existing fire stations and new design-built stations

Adapter cone designed for both empty and loaded vehicles

UMC (Uniform Mechanical Code): “A mechanical ventilation or exhaust shall be installed to control, capture, and remove emissions generated. Construction ducts used for conveying products shall be of substantial air tight construction and shall not have openings.” IMC 2003 (International Mechanical Code): “Motor vehicles that are operated shall be provided

with a source capture system connected directly to the motor vehicles exhaust system. In addition, recirculation of air is prohibited.”

SIMPLEST NOZZLE ATTACHMENTS ARE T H E M AG N E T I C G R A B B E R ® Strategically positioned integrated magnet for easy connection

Protective rubber safety cover to avoid damage to vehicle and surroundings

Unique conical design for soft release

Ambient-air intake protects the system and surroundings from hitemperature exhaust gasses

 

BENEFITS

T H E M AG N E T I C G R A B B E R ®

▪▪Easy to operate “click and seal”

Now there is an exhaust removal system for every station. Combining the various benefits of Plymovent’s patent pending Magnetic Grabber® and the opportunity to have an easy to use professional Plymovent system in your station makes the decision an easy one.

▪▪Virtually 100% source capture ▪▪Ambient air intake ▪▪Unique conical design for easy use ▪▪Functions without electrical power input

E A S Y TO O P E R AT E - “ C L I C K A N D S E A L” The conical design makes attaching the Magnetic Grabber® to the vehicle extremely user friendly. At the sound of a clear “click” you know you have a correctly “sealed” connection of the system to the vehicle, minimizing the danger of diesel exhaust emissions in the station. The strategically positioned magnets ensure a good connection to the vehicle, as well as a controlled automatic disconnect when the vehicle exits the station.

P RO F E S S I O N A L L O O K A N D P E R F O R M A N C E With its stainless polished look the Magnetic Grabber® is easy to recognize, but also the functionality is what you can expect of a Plymovent system. With no obstuctions in the hose, the system can remove dangerous diesel exhaust at its maximum capacity. The new Magnetic Grabber® system can be quickly attached to any vehicle equipped with the innovative Plymovent tailpipe connector. The tailpipe connector’s ambient air intake also ensures the vehicle’s exhaust temperatures are reduced thereby making the system safer to use.

S A F E T Y O F T H E S YS T E M In order to protect your investment and provide protection against damages, Plymovent has integrated a rubber cover on the Magnetic Grabber® . With the Magnetic Grabber’s® rubber cover, along with your systems Safety Disconnect, you and your system are well protected.

VIRTUALLY 100% EFFECTIVE WITH .... T H E P N E U M AT I C G R A B B E R ®

 T H E P N E U M AT I C G R A B B E R ® The most requested and used vehicle connecting device in the market. The Plymovent Pneumatic Grabber® has set the standard with over 50,000 Grabbers in service throughout North America.

GRABBER NOZZLE Plymovent’s state of the art Grabber Nozzle utilizes Kevlar and Nomex construction to guarantee virtually 100% capture of both gases and particulates. The Nomex heat resistant liner shields the Grabber from direct contact with high temperature tailpipes just as you rely on Nomex to protect you in your Fire protective clothing.

S I M P L E TO U S E From the standing position just attach the Grabber® to the tailpipe, push the fill valve, and quickly ensure a positive seal around any size tailpipe eliminating the chance that dangerous exhaust fumes will escape back into your station.

C O N T RO L L E D R E L E A S E With the adjustable pneumatic switches the release of the Pneumatic Grabber is completely adjustable to meet the needs and requirements of the Station.

THE PLYMOVENT COMMITMENT

Plymovent has more than 20 years of experience providing source capture solutions globally. With over 50,000 installations, our Source Capture Systems have been protecting workers from airborne contaminants in their environment. Our systems have been installed in a variety of sectors, including: F

F

Volunteer and Paid Fire Departments Federal and State Stations

F

EMS Departments

F

Training Facilities

F

Airport ARFF Stations

F

Military Fire Departments

F

Private/Corporate Fire Stations

P LY M OV E N T S O U R C E C A P T U R E S YS T E M S : - A N I N D U S T RY S TA N DA R D

Plymovent continuously works with its industry suppliers as well as governmental organizations to design and engineer products that meet or exceed our customers’ expectations worldwide. Visit us at www.plymovent.com.

The Plymovent Grabbers® can be connected to the product range of AMCA rated fans and UL certified control equipment of Plymovent. A Plymovent system enables you to get fully automatic control of your products in the most efficient way, saving you money and bringing you clean air at work. Our philosophy is to provide quality systems that are safe, user-friendly, code compliant and that will enhance the quality of life for your firefighters and personnel. That is why we have developed a line of source capture systems designed to meet your station’s needs. Plymovent is ISO 9001:2008, UL and AMCA certified and meets the NFPA 1500 and 1901 guidelines.

PLYMOVENT NORTH AMERICA USA: 115 Melrich Road Cranbury, NJ 08512 [email protected]

T 800 644 0911 T 609 395 3500 F 609 655 0569

Plymovent cares about the air you breathe. We deliver products, systems and services which ensure clean air at your work environment, anywhere in the world. Our expertise gained over many years, high quality products and genuine commitment to customer requirements enable us to provide precisely the solutions you need. 8

CANADA: 3770A Laird Road, Unit #5-6 Mississauga, ON L5L 0A7

T 800 465 0327 T 905 564 4748 F 905 564 4609

Plymovent is ISO 9001: 2008 Certified

ACCREDITED

®2010 Plymovent ®. Plymovent ® is a registered trademark of Plymovent. PNA-FB-0901-009

www.plymovent.com