DIESEL EXHAUST FLUID DISPENSING SYSTEMS www.AgSpray.com

DRUM & TOTE

PUMPS

YOU HAVE CHOICES... To determine which dispensing system best suits your operating requirements you need to answer three simple questions: 1. What is the size of the fleet to be serviced today/ tomorrow and how much diesel fuel will be used? 2. What size package will deliver the greatest level of operating efficiency? 3. What is your application environment and what versatility will you require?

Drum

Tote

Recommended Storage / Dispensing System Size

Drum system

Tote system

# Of SCR Vehicles

1–5

8 – 13

Diesel Fuel In Gallons Per Week

500 – 2,000

3,000 – 5,000

Per Week

10 – 40

60 – 100

Per Month

40 – 160

240 – 400

Per Year

640 – 2,560

3,840 – 6,400

DEF Usage In Gallons

NOTE: * Above calculations based at 3% usage at average fuel economy of 6 miles per gallon. Container volume/mileage usage may vary depending on vehicle dosage rate.

Pump Comparison Chart All AgSpray pumps are specifically designed and engineered for pumping Diesel Exhaust Fluid. Strong delivery pressure makes them ideal for use in dispensing DEF from drums or totes.

2

3/4 HP Centrifugal Pump

1/3 HP Diaphragm Pump

Portable 12V Diaphragm Pump

• 3/4 HP Centrifugal Pump - 115V 60Hz • SureStop™ pressure switch for auto shut-off • Special DEF compliant shaft seal • Must prime on initial use • Stainless steel motor shaft and housing • 8-10 GPM flow rate • 1 year “Hassle Free” warranty

• 1/3 HP Diaphragm Pump - 115V 60Hz • Self priming • Stainless steel motor shaft • Polypropylene pump housing and EPDM diaphragm • 4-pole DEF motor • Built-in check valve • 7-9 GPM flow rate • 1 year “Hassle Free” warranty

• 12 Volt/10 Amp Diaphragm Pump • Self priming • Carbon Steel Pump Caddy • 12’ Power Cord • Polypropylene pump housing and EPDM diaphragm • 6-8 GPM flow rate • 1 year “Hassle Free” warranty

DRUM

DISPENSING SYSTEMS

Piston Hand Pump System

Piston Hand Pump

The Piston Hand Pump, DEF dispensing system, comes with: • Industrial grade polypropylene housing • Bung adaptor • 10’ dispensing hose • Manual Nozzle with pin lock feature • Expandable downtube • Hose Clamps • Drum not included

Dispense Hose

Bung Adapter

ISO 22241

Compatible Materials of Construction Stainless Steel Spout

Part Number ASER12068010

Dispense Hose Length

Pump Piston Hand Pump

10’

⅓ HP Drum Dispensing System or

The Drum, DEF dispensing system, comes with: • • • • • • •

Additional Required Part

1/3 HP Diaphragm Pump Plastic or Stainless steel automatic shut-off nozzle 4 ft. suction hose Dispense hose (in various lengths) Carbon steel pump bracket Requires part #DEF756-008B, EPV Dispense Coupler to connect to AgSpray drums (sold separately) Drum not included

Part Number ASETB20MN (with Plastic Nozzle)

ASETB20SN (with SS Nozzle)

Dispense Hose Length 20’

20’

Plastic or Stainless Steel Automatic Shut-Off Nozzle Pump 1/3 HP Diaphragm Pump

Dispense Coupler When using this dispensing system

Suction Hose

Dispense Hose

with AgSpray drums, be sure to order the Dispense Coupler. Part# DEF756-008B

Carbon Steel Pump Bracket Mounts on drum and provides a stable base to hold your pump

ISO 22241

Compatible Materials of Construction

Pump & Pump Features (see page 2 for additional details on pumps)

Drum System with 1/3 HP Diaphragm Pump • Manual On/Off • Self Priming • Operating pressure 1.6 bar (25 psi)

www.AgSpray.com

• 115v 60 Hz • Flow rate of 7 to 9 gpm • 1 year “Hassle Free” pump warranty

3

TOTE

DISPENSING SYSTEMS

⅓ HP Tote Dispensing System The Tote,DEF dispensing system, comes with:

ISO 22241

Compatible Materials of Construction

Plastic or Stainless Steel Automatic Shut-Off Nozzle

• Choice of pump • Plastic or Stainless steel automatic shut-off nozzle • 4 ft. suction hose • Dispense hose (in various lengths) • Carbon steel pump bracket • Requires part # DEF744- 048 Stainless Steel Coupler, or BEDEFPTDC Poly Coupler to connect to AgSpray totes (sold separately) • Tote not included

or

Additional Required Part

Pump Choose from: • 1/3 HP Diaphragm Pump • Portable 12V Diaphragm Pump

Dispense Coupler When using this dispensing system with AgSpray totes, be sure to order the Dispense Coupler or Poly Coupler. Part# DEF744-048 Part# BEDEFPTDC

Dispense Hose 3/4” diameter, available in various lengths. All AgSpray hoses meet ISO 22241 guidelines for use with DEF fluid.

Suction Hose 3/4” diameter. All AgSpray hoses meet ISO 22241 guidelines for use with DEF fluid.

Also available with:

Portable 12V Diaphragm Pump

Part# ASE12V20SN

Part Number ASETB20MN (with Plastic Nozzle)

ASETB20SN (with SS Nozzle)

ASE12V20SN (with SS Nozzle)

4

(Tote not included)

Dispense Hose Length 20’

20’

Pump & Pump Features (see page 2 for additional details on pumps)

Tote System with 1/3 HP Diaphragm Pump • Manual On/Off • Self Priming • Operating pressure 1.6 bar (25 psi)

• 115v 60 Hz • Flow rate of 7 to 9 gpm • 1 year “Hassle Free” pump warranty

Portable 12V, 1/3 HP Diaphragm Pump with Caddy

20’

• 12’ power cord with in-line fuse and battery clips • Carbon Steel Pump Caddy • Dispense Hose available in 10’, 20’ and 30’

• Flow rate of 6-8 gpm • Self Priming • 1 year “Hassle Free” pump warranty

TOTE

DISPENSING SYSTEMS

¾ HP Tote Dispensing System Stainless Steel Automatic Shut-Off Nozzle

The Tote, DEF dispensing system, comes with: • • • • • • •

ISO 22241

3/4 HP Electric Centrifugal Pump Stainless steel automatic shut-off nozzle 4 ft. suction hose Dispense hose (in various lengths) Stainless steel pump bracket Requires part # DEF744-048 Stainless Steel Coupler, or BEDEFPTDC Poly Coupler to connect to AgSpray totes (sold separately) Tote not included

Compatible Materials of Construction

Suction Hose 3/4” diameter. All AgSpray hoses meet ISO 22241 guidelines for use with DEF fluid.

Additional Required Part

Dispense Coupler When using this dispensing system with AgSpray totes, be sure to order the Dispense Coupler or Poly Coupler. Part# DEF744-048 Part# BEDEFPTDC

Pump 3/4 HP Electric Centrifugal Pump SureStop™ pressure switch for auto shut-off

Dispense Hose 3/4” diameter, available in various lengths. All BlueDEF™ hoses meet ISO 22241 guidelines for use with DEF fluid.

(Tote not included)

Part Number

ASETBCSS20 (with SS Nozzle)

Dispense Hose Length

Pump & Pump Features (see page 2 for additional details on pumps)

Tote System with 3/4 HP Electric Centrifugal Pump

20’

• SureStop™ pressure switch for auto shut-off • Must prime on initial use • Operating pressure 8 bar

www.AgSpray.com



• 115v 60 Hz • Flow rate of 8 to 10 gpm • 1 year “Hassle Free” pump warranty

5

MOBILE

DISPENSING SYSTEMS Pump 1/3 HP Electric Diaphragm Pump

Mobile Drum Cart System The Mobile Drum Cart, DEF dispensing system, comes with: • 1/3 HP Diaphragm Pump • Heavy duty steel, 3 wheel drum cart • Stainless steel automatic shut-off nozzle • 4 ft. suction hose • 10’ dispense hose • Stainless steel pump bracket • Requires part # DEF756-008B, Dispense Coupler to connect to AgSpray drums (sold separately) • Drum not included

ISO 22241

Compatible Materials of Construction

Dispense Hose 3/4” diameter. All AgSpray hoses meet ISO 22241 guidelines for use with DEF fluid.

Stainless Steel Automatic Shut-Off Nozzle

Suction Hose 3/4” diameter. All AgSpray hoses meet ISO 22241 guidelines for use with DEF fluid.

Swivel Locking Front Wheel Holds cart steady on flat and slanted surfaces. (Drum not included)

Part Number

Dispense Hose Length

Heavy Duty Steel Construction Powder coated finish. Built in nozzle holder and hose hanger on cart handle.

Pump & Pump Features (see page 2 for additional details on pumps)

Mobile Drum Cart with 1/3 HP Diaphragm Pump ASETB20SN-MC

20’

• Stainless Steel Automatic Shut-off Nozzle • Self Priming • Operating pressure 1.6 bar (25 psi)



• 115v 60 Hz • Flow rate of 7 to 9 gpm • 1 year “Hassle Free” pump warranty

Mobile Drum Cart with Portable 12V Diaphragm Pump ASE12V20SN-MC

20’

• Stainless Steel Automatic Shut-off Nozzle • Self Priming • Viton Check Valve



• 12v - 10 Amps • Flow rate of 6 to 8 gpm • 1 year “Hassle Free” pump warranty

Truck Tank System

Stainless Steel Automatic Shut-Off Nozzle Rugged design for long life and reliable service. 19mm nozzle spout

The Truck Tank, DEF dispensing system, comes with: • • • • • • •

12V self-priming diaphragm pump 20 ft dispense hose Pump Portable 12V 4 ft Suction hose Diaphragm Pump Forklift recesses Lockable lid for security Integrated carry handles Molded recesses for tie-downs during transport

Dispense Hose

¾” diameter, available in a 40’ length (no hose reel) or a 25’ hose mounted on hose reel. AgSpray hoses meet ISO 22241 guidelines for use with DEF fluid.

(BlueDEF not included)

Part Number ASETTP110 ASETTP155

6

Dispensing Unit Capacity 110 gallon Truck Tank

155 gallon Truck Tank

Pump & Pump Features

Portable Truck Tank with 12V Diaphragm Pump • 12’ power cord with in-line fuse and battery clips • Self Priming

• Flow rate of 6-8 gpm • 1 year “Hassle Free” pump warranty

ACCESSORIES

DISPENSING SYSTEMS

All AgSpray accessories are designed for dispensing Diesel Exhaust Fluid and are built with ISO 22241 compatible materials.

ISO 22241

Compatible Materials of Construction

Couplers Drum Dispense Coupler

Part# DEF756-008B

• For use with plastic 3 pin valve on BlueDEF™ drums (DEF001) • Stainless steel

Tote Dispense Coupler

Part# DEF744-048

• For use with stainless steel valve or poly 4 pin Valve for AgSpray Totes (DEF275S & DEF330S) • Stainless steel

Poly Tote Dispense Coupler

Part# BEDEFPTDC

• For use with stainless steel valve or poly 4 pin Valve for AgSpray Totes (DEF275S & DEF330S) • Glass Filled Nylon

Flow Meter DEF Flow Meter • • • •

Part# DEFFM

Turbine measuring system • Totalizer Reinforced polyamide body • Flow indication Threaded input/output, aligned • Measures gallons or liters Runs on 2 AAA batteries male/female depending on version

Nozzles Stainless Steel Automatic Shut-Off Nozzle

Part# DEFSN

• Rugged design for long life & reliable service • 19mm nozzle spout • Stainless steel main stem • Lever and lever guard for additional durability

Hose Reel Hose reel assembly with 25’ dispense hose

Part# DEFHR25HOSE

• Open design allows for easy maintenance • Stores hose up and out of harm’s way, greatly extending service life of hose • Also available in 50’, 75’ and 100’

Insulated Heat Blanket for Totes 275 gallon insulated heat blanket, protects down to -34°C(-30°F)

Part# DEFTH275BD-A

330 gallon insulated heat blanket, protects down to -34°C(-30°F)

Part# DEFTH330BD-A

• Uniform, patented heat spreading technology • Protects DEF fluid and pump assembly, prevents freezing • Works on both metal and poly totes • Unique design allows for easy access to dispensing system

www.AgSpray.com

• • • •

UV, wind and water resistant Certified to UL/CSA safety standards 120V 60Hz and 12V options, 1440 Watts Amperage – 12A, Resistance – 10.0 ohms, Ohms Range – 9.5 – 10.5

7

BULK

Indoor Storage with Recommended Fitting Package To help maintain the purity of your diesel exhaust fluid, AgSpray storage tanks are constructed of DEF compatible high-density polyethylene (HDPE). These single wall constructed units come complete with all fittings and venting components pre-installed, making installation with your dispensing system easy.

COMPONENTS STORAGE TANK • DEF compatible, single wall, HPDE, vertical storage tank with non-vented manway – available in 500, 1,000, 2,000, 3,000, 6,500 and 8,400 gallon sizes FITTING PACKAGE • 2” Stainless Steel Threaded Bulk Head Fitting in the Sidewall of Tank - Fill Side • 1” Stainless Steel Threaded Bulk Head Fitting in the Sidewall of Tank - Dispense Side • 2” Polypropylene Threaded Top Mount Fittings (2) • 1”x12” Siphon Tube • 2” Stainless Steel Ball Valves and Nipples (2) • 1”x3/4” Stainless Steel, Barbed Nipple and Ball Valve • DEF Pipe Sealant VENTING PACKAGE • Duplex Vent Package – Rated for 225 gpm • Duplex Vent Filtration Sock

TANK DIMENSIONS Tank Size

W x H (Tip-up Height)

Weight

500 1,000 2,000 3,000 6,500 8,400

48” x 73” (80”) 65” x 81” (103”) 87” x 89” (125”) 95” x 109” (145”) 119” x 150” (192”) 119” x 188” (223”)

180 lbs. 275 lbs. 400 lbs. 600 lbs. 1,515 lbs. 2,135 lbs.

(Gallons) (Inches) (Pounds)

ISO 22241

Compatible Materials of Construction

8

Indoor Storage with Indoor Dispensing System The AgSpray Indoor Storage Tank with Indoor Dispensing System is a complete indoor diesel exhaust fluid storage and dispensing system. With several tank sizes to choose from, a pump system and filtration unit, this system provides all the DEF compatible components to maintain the purity of your diesel exhaust fluid. All tank fittings and venting components are pre-installed.

COMPONENTS STORAGE TANK •D  EF compatible, single wall, HPDE, vertical storage tank with non-vented manway – available in 500, 1,000, 2,000, 3,000, 6,500 and 8,400 gallon sizes FITTING PACKAGE •2  ” Stainless Steel Threaded Bulk Head Fitting in the Sidewall of Tank - Fill Side • 1 ” Stainless Steel Threaded Bulk Head Fitting in the Sidewall of Tank - Dispense Side •2  ” Polypropylene Threaded Top Mount Fittings (2) • 1”x12” Siphon Tube • 2” Stainless Steel Ball Valves and Nipples (2) • 1”x3/4” Stainless Steel, Barbed Nipple and Ball Valve • DEF Pipe Sealant VENTING PACKAGE • Duplex Vent Package – Rated for 225 gpm • Duplex Vent Filtration Sock FILTRATION UNIT •2  0’ Reinforced polypropylene filter housing with 1/2” NPT connections • Includes a 1-micron filter element DISPENSING SYSTEM •3  /4 HP centrifugal pump with wall mount bracket (also available in a stainless steel pedestal stand unit)* •2  5’ DEF hose on hose reel with stainless steel automatic shut-off nozzle

TANK DIMENSIONS * If dispensing system is mounted more than 10’ from storage tank, additional connection hose will be required

ISO 22241

Compatible Materials of Construction

Tank Size

W x H (Tip-up Height)

Weight

500 1,000 2,000 3,000 6,500 8,400

48” x 73” (80”) 65” x 81” (103”) 87” x 89” (125”) 95” x 109” (145”) 119” x 150” (192”) 119” x 188” (223”)

180 lbs. 275 lbs. 400 lbs. 600 lbs. 1,515 lbs. 2,135 lbs.

(Gallons) (Inches) (Pounds)

www.AgSpray.com

9

BULK

Indoor Storage with Outdoor Dispensing System The AgSpray Indoor Storage Tank with Indoor Dispensing System is a complete indoor diesel exhaust fluid storage and dispensing system. With several tank sizes to choose from, a pump system and filtration unit, this system provides all the DEF compatible components to maintain the purity of your diesel exhaust fluid. All tank fittings and venting components are pre-installed.

COMPONENTS STORAGE TANK •D  EF compatible, single wall, HPDE, vertical storage tank with non-vented manway – available in 500, 1,000, 2,000, 3,000, 6,500 and 8,400 gallon sizes FITTING PACKAGE •2  ” Stainless Steel Threaded Bulk Head Fitting in the Sidewall of Tank - Fill Side • 1 ” Stainless Steel Threaded Bulk Head Fitting in the Sidewall of Tank - Dispense Side •2  ” Polypropylene Threaded Top Mount Fittings (2) • 1”x12” Siphon Tube • 2” Stainless Steel Ball Valves and Nipples (2) • 1”x3/4” Stainless Steel, Barbed Nipple and Ball Valve • DEF Pipe Sealant VENTING PACKAGE • Duplex Vent Package – Rated for 225 gpm • Duplex Vent Filtration Sock FILTRATION UNIT •2  0’ Reinforced polypropylene filter housing with 1/2” NPT connections • Includes a 1-micron filter element DISPENSING SYSTEM •3  /4 HP centrifugal pump* •C  ommercial DEF dispenser with industrial grade, insulated/heated cabinet •2  5’ DEF hose on hose reel with stainless steel automatic shut-off nozzle • Nozzle mounted flow meter (non weights and measures)

TANK DIMENSIONS * If dispensing system is mounted more than 10’ from storage tank, additional connection hose will be required

ISO 22241

Compatible Materials of Construction

10

Tank Size

W x H (Tip-up Height)

Weight

500 1,000 2,000 3,000 6,500 8,400

48” x 73” (80”) 65” x 81” (103”) 87” x 89” (125”) 95” x 109” (145”) 119” x 150” (192”) 119” x 188” (223”)

180 lbs. 275 lbs. 400 lbs. 600 lbs. 1,515 lbs. 2,135 lbs.

(Gallons) (Inches) (Pounds)

Mini-Bulk Storage Tank The AgSpray mini-bulk system is a complete storage system. The AgSpray mini-bulk system was designed to fit directly on a fuel island with the ability to expand as market demands growth. With several fleet and retail dispensing options to choose from, the AgSpray mini-bulk system provides all the DEF compatible components to maintain the purity of your diesel exhaust fluid at a fleet or retail location. All tank fittings and venting components are pre-installed.

COMPONENTS STORAGE TANK •D  EF compatible - 500 or 1,000 gallon capacity • High-level indicator with automated fill-port valve to prevent overfilling • Ability to expand from 500 to 1,000 gallon unit • Forklift pockets with ability to be relocated FEATURES • Polished stainless steel outer panels and roof for longterm durability • Insulated for hot to cold climates – UV Resistant • High density polyethylene tank(s) with no bottom or side-wall penetrations • Dry-break adapter fill port • Weather-tight control panel mounted on front wall and pre-wired to all Low tank level indicators • 1/2 HP submersible DEF pump(s) • Pre-Piped & wired with electrical components located over 18” XP zone • Functional components and instrumentation • Lockable door for fill-port access • 120V design standard (230V optional upgrade, call for pricing) • Includes a 1-micron filter element OPTIONS • Heat • Can be set-up for expansion at a later date

TANK DIMENSIONS Tank Size

W x H x L

500 1,000

36” x 107” x 48” 36” x 107” x 96”



Weight

(Gallons) (Inches) (Pounds)

800 lbs. 1,600 lbs.

ISO 22241

Compatible Materials of Construction

www.AgSpray.com

11

OPTIONAL • Heat • Pulse output

AgSpray FLEET DISPENSER

30 GPM MECHANICAL TRANSFER DOLLY

• Hose reel w/ 24’ DEF hose, ball stop & 4-way roller

• 1/2 HP flooded suction centrifugal pump

• Stainless steel automatic nozzle with swivel • Plastic nozzle holder • Turbine meter with hose adapters • Pump assembly • Filter housing & cartridge • Powder coated carbon steel cabinet • Foil face insulation lining • Thermostat with silicone heater • Slam latch with locking handle user compartment 4-way roller

• Mechanical pump seal • 110 VAC single phase 60Hz motor • Piston flow meter with mechanical register • Mechanical ticket printer • Weights and measures approved • 1’x10’ suction hose • 1’x20’ dispense hose • Higher flow rate systems available

• Hardware for installation including anchor kit

AgSpray REGIONAL LOCATIONS

Each Regional Location Services The Area Corresponding To The Following Color Codes.