Ref: EUTL14

TAPER-LOC

®

Install glass with ease...

Frameless Glass Balustrade System CONFORMS TO

GENERAL CONSTRUCTION SUPERVISION ADMISSION

BS 6180:2011

3

Install glass with ease

CRL proudly presents the innovative Dry Glaze TAPER-LOC® Glass Balustrade System designed for quick, easy and secure installations. • 50% faster to install than traditional alternatives • For toughened/toughened laminated glass from 12mm-25.52mm thick • Dry glaze system, no need for cement • Tested to meet the strictest building code requirements BS6180:2011 and AbZ • The product is completely unique because it uses a horizontal TAPER-LOC® design, which allows the system to be adjusted, dismantled and re-set • Ideal for replacing scratched and broken panels in existing applications

Project: Greenwich Peninsula

5

Install glass balustrades with ease...

Simple. Fast. Unique.

Ready... Set... The TAPER-LOC® Installation/Removal Tool compresses the Tapers together to lock the glass in place

TAPER-LOC® Tapers insert into the Base Shoe

Done. TL5X10 CRL TAPER-LOC® Taper Set for Monolithic Toughened Glass

• Reduces Installation Time by 50%, with no need for wet cement. • For use with Monolithic and Laminated Toughened Glass • Easy installation with one compact Installation/Removal Tool • Designed by CRL for Commercial and Residential Applications

For a demonstration visit taper-loc.co.uk

CONFORMS TO

GENERAL CONSTRUCTION SUPERVISION ADMISSION

BS 6180:2011

For more information call FREE on 00 800 0421 6144 (UK & Europe) | Fax FREE on 00 800 0262 3299

The System includes an Installation/Removal Tool and CRL TAPER-LOC® Tapers for 12mm, 15mm, and 19mm toughened monolithic glass applications, and 13.52mm, 17.52mm, 21.52mm, and 25.52mm laminated toughened glass applications. Unique because they use a horizontal taper lock design, TAPER-LOC® Tapers are simply installed with CRL’s exclusive TLK12 Installation/Removal Tool.

Email: [email protected] | www.taper-loc.co.uk

7

EASY INSTALLATION

The process of installing Glass Balustrades is now quick and easy with CRL’s new and innovative TAPER-LOC® system. TAPER-LOC® has a unique design that lets you apply precision tension to lock it in place, securing the glass in your aluminium base shoe without the use of messy cement. Your installation time is reduced by up to 50% while still exceeding code standards.

Adhere the L-Setting Blocks to the bottom of the glass panel.

Conforming to Building Standards Across Europe At CRL, we are committed to the testing and development of all of our products. All CRL TAPER-LOC® Systems are independently tested to meet British, German, French and US Standards. We have solutions up to and including 3kN load tests.

Insert the Taper set half way down into the Base Shoe as shown, opposite the L-Setting Block, and then squeeze the Tapers together finger tight.

CONFORMS TO

Place Installation/Removal Tool into position onto the Tapers and push them down into the Base Shoe.

GENERAL CONSTRUCTION SUPERVISION ADMISSION

BS 6180:2011

Our project testing facilities and certificates available upon request. Contact Technical Sales on freephone

00 800 0421 6144

Crank the Torque Wrench until the wrench clicks and breaks for a few degrees, letting you know the Tapers are locked to the correct measured torque.

Project: Olympia Swimming & Leisure Complex

9

Base Shoes

Monolithic Toughened Glass

Laminated Toughened Glass

Base Shoe

To Suit Glass Thickness

Description

B5S10D/F

12mm

CRL B5S Series Standard Square Base Shoe

63.5mm

Measurements

Base Shoe

To Suit Glass Thickness

Description

Measurements

Stock Length: 3.05m

L56S10D/F

13.52mm

CRL L56S Series Standard Square Base Shoe

• Pre-drilled

Hole Size: 14.3mm

• Pre-drilled

• Works with TL5X10 TAPER-LOC® Taper Sets

Counter Bore: 22mm

• Works with LTL96X TAPER-LOC® Taper Sets

22.2mm

104.8mm

73mm

Hole Size: 14.3mm Counter Bore: 22mm 120.6mm

Depth: 12.7mm Centre to Centre: 305mm

12.7mm

Stock Length: 3.05m

34.9mm

Depth: 12.7mm Centre to Centre: 305mm

22mm

20.6mm

12.7mm

14.3mm

20.6mm 14.3mm

B5S10D L56S10D

B6S10D/F

15mm

CRL B6S Series Standard Square Base Shoe

Stock Length: 3m

66.7mm 28.6mm

L68S10D/F

17.52mm

CRL L68S Series Standard Square Base Shoe

• Pre-drilled

Hole Size: 14.3mm

• Pre-drilled

• Works with TL5X10 TAPER-LOC® Taper Sets

Counter Bore: 22mm

• Works with LTL96X TAPER-LOC® Taper Sets

104.8mm

12.7mm

Counter Bore: 31.7mm

Depth: 12.7mm

CRL B7S Series Heavy-Duty Square Base Shoe

12.7mm

20.6mm

20.6mm

20mm

Stock Length: 3.05m

69.9mm

L21S10D/F

21.52mm

CRL L21S Series Standard Square Base Shoe

• Pre-drilled

Hole Size: 14.3mm

• Pre-drilled

• Works with TL5X10 TAPER-LOC® Taper Sets

Counter Bore: 22mm

• Works with LTL10X TAPER-LOC® Taper Sets

22.2mm

104.8mm

Centre to Centre: 305mm

31.7mm

B6S10D

19mm

Depth: 12.7mm

121mm

14.3mm

B7S10D/F

Stock Length: 3m Hole Size: 20mm

Centre to Centre: 300mm

22.2mm

77mm 39mm

42.8mm

L68S10D 81mm

Stock Length: 3m Hole Size: 20.6mm 120.6mm

Depth: 12.7mm

Depth: 12.7mm 31.7mm

Centre to Centre: 305mm 12.7mm

20.6mm

12.7mm

14.3mm

12mm

CRL B5T Series Tapered Base Shoe • Typically used as the Base Channel for Glass Railing Systems requiring a Flush Installation Embedded in Concrete

20.6mm

Stock Length: 3.05m

39.6mm

22.2mm

104.8mm

• Works with TL5X10 TAPER-LOC® Taper Sets

L25S10D/F

25.52mm

47.6mm

CRL L25S Series Heavy-Duty Square Base Shoe

Hole Size: 14.3mm

• Pre-drilled

Counter Bore: 22mm

• Works with LTL10X TAPER-LOC® Taper Sets

Stock Length: 3m 120.6mm

Hole Size: 20.6mm Counter Bore: 31.7mm

Depth: 12.7mm

31.7mm

Centre to Centre: 305mm 12.7mm

Centre to Centre: 300mm

20.6mm

L21S10D

B7S10D

B5T10D

Counter Bore: 31.7mm

12.7mm

20.6mm

Depth: 12.7mm Centre to Centre: 300mm

20.6mm 20.6mm 85.7mm

14.3mm

L25S10D B5T10D

W5B10D

10mm

CRL W5B Series Small Profile Windscreen Base Shoe • Pre-drilled • Works with TL3W10 TAPER-LOC® Taper Sets • Ideal for Windscreens and Privacy Partitions NOTE: NOT SUITABLE FOR STRUCTURAL APPLICATIONS

Stock Length: 3.05m

35mm

Hole Size: 9mm 18.6mm 69.9mm

Counter Bore: 18.6mm Depth: 6.3mm

6.3mm

20.6mm

Centre to Centre: 305mm

Base Shoe codes end with either ‘D’ or ‘F’ to determine Surface or Side Mounted. D = Surface Mounted Base Shoe F = Side Mounted Base Shoe NOTE: Undrilled and fascia drilled base shoe available and in stock - contact Technical Sales for details. Minimum order: 1 each. All Base Shoe can be combined for quantity pricing. Must ship common carrier. Stock lengths have a tolerance of plus or minus 19mm. CRL advise against pre-drilling the substructure prior to installation of base shoe.

8.7mm

INTRODUCING... TAPER-LOC

®

W5B

Base Shoe codes end with either ‘D’ or ‘F’ to determine Surface or Side Mounted. D = Surface Mounted Base Shoe F = Side Mounted Base Shoe NOTE: Undrilled and fascia drilled base shoe available and in stock - contact Technical Sales for details. Minimum order: 1 each. All Base Shoe can be combined for quantity pricing. Must ship common carrier. Stock lengths have a tolerance of plus or minus 19mm.

For more information call FREE on 00 800 0421 6144 (UK & Europe) | Fax FREE on 00 800 0262 3299

•

G

Our NEW lower cost base shoe designed for use with CRL’s patented TAPER-LOC® Glass Balustrade System •

20% lighter but with all the strength of standard base shoe •

Environmentally friendly while meeting and exceeding code standards •

Surface and fascia mount designs in 3 metre lengths

Email: [email protected] | www.taper-loc.co.uk

Taper Set - Laminated Toughened Glass

Taper Set - Monolithic Toughened Glass

CRL TAPER-LOC® Taper Set for Laminated Toughened Glass

CRL TAPER-LOC® Taper Set for Monolithic Toughened Glass

Great for stadiums, apartments and shopping centres, or any areas trying to avoid the hazard of broken glass falling to lower levels. CRL’s TAPER-LOC® Laminated Taper Set is made up of four Tapers and one L-Setting Block. Tapers are made of high strength reinforced nylon. They expand in thickness when compressed together with the Cat. No. TLK12 Installation/Removal Tool, mechanically locking the glass panel into the base shoe.

CRL’s TAPER-LOC® Taper Set for 12 to 19mm glass is made up of two Tapers and one L-Setting Block. Not designed for Laminated Glazing.

CAT NO.

Description

Application

TL5X10

For 12, 15 and 19mm monolithic toughened glass

Great for glass balustrade and windscreen applications

For use with CRL’s B5S, B5A, B5T, B6S and B7S glass balustrade base shoes NOTE: Minimum order: 10 sets.

CAT NO.

Description

Application

LTL10X

LTL10X designed for 21.52mm laminated toughened glass (10mm x 1.52mm x 10mm) and 25.52mm laminated toughened glass (12mm x 1.52mm x 12mm)

For use with CRL’s laminated toughened glass balustrade base shoes only

LTL96X designed for 13.52mm laminated toughened glass (6mm x 1.52mm x 6mm) and 17.52mm laminated toughened glass (8mm x 1.52mm x 8mm)

For use with CRL’s laminated toughened glass balustrade base shoes only

LTL96X

NOTE: Minimum order: 10 sets.

System Tools

CRL TAPER-LOC® Taper Set for Monolithic Toughened Glass (Windscreens Only) CRL’s TAPER-LOC® Taper Set for 10mm glass is made up of two Tapers and one L-Setting Block. Tapers are made of high strength reinforced nylon. They expand in thickness when compressed together with the Cat. No. TLK12 Installation/Removal Tool, mechanically locking the glass panel into the base shoe. Not designed for Balustrade Applications or Laminated Glazing. CAT NO.

Description

Application

TL3W10

For 10mm monolithic toughened glass

Great for glass windscreen applications

914mm recommended maximum glass height

Not suitable for balustrade applications

NOTE: Minimum order: 10 sets.

CRL TAPER-LOC® Installation / Removal Tool Kit The Installation/Removal Tool is used for tightening TAPER-LOC® Tapers in the channel of the base shoe. The tool has an Integrated Torque Wrench that applies the precise lock-up force necessary to set the glass panels. Simply set in place and turn the wrench until a clicking sound is heard. This assures the Tapers have been locked together. It can also remove Tapers when glass panels need to be reset or replaced.

CRL PAL Plumb / Angle / Level Indicator The PAL Plumb/Angle/Level Locator Kit is designed to assist you with level and plumb installations of base shoe for balustrade and windscreen installations. This innovative tool levels the base shoe in both the vertical and horizontal orientations. Perfect for use with all TAPER-LOC® installations.

KIT CONTENTS: 1 x Integrated Torque Wrench 1 x Glass Balustrade Setting Tools for Monolithic and Laminated Glass 1 x pair of Glass Setting Roller Blocks 1 x Standard and Recessed Blades 1 x Instructions 1 x Moulded Carrying Case CAT NO.

Description

Application

CAT NO.

Description

TLK12

One tool supports all of CRL’s different TAPER-LOC® systems

Easily allows you to remove, adjust, or replace glass panels in seconds

PAL1K

Great for levelling the base shoe for balustrade and windscreen applications

Works with monolithic toughened and laminated toughened glazing types

Complete with a torque wrench designed for precise tension

Features include a digital angle, plumb finder, and level locator display NOTE: Minimum order: 1 each.

NOTE: Minimum order: 1 each.

For more information call FREE on 00 800 0421 6144 (UK & Europe) | Fax FREE on 00 800 0262 3299

Email: [email protected] | www.taper-loc.co.uk

11

13

Base Shoes Glass Thicknesss:

CRL System:

Fixing To Steel:

Fixing To Concrete:

Typical Installations:

Fixed To Steel Base Mounted 12mm

B5S Series

M12 S/S Socket Head Cap Screw

M8 x 95mm Hilti Expansion Anchor

Residential including stairs and landings but excluding external balconies and edges of roofs

15mm

B6S Series

M12 S/S Socket Head Cap Screw

M8 x 95mm Hilti Expansion Anchor

Residential external balconies, edges of roofs, stairs and landings

19mm

B7S Series

M12 S/S Socket Head Cap Screw

M8 x 95mm Hilti Expansion Anchor

Commercial areas susceptible to overcrowding

17.52mm

L68S Series

M14 S/S Hex Head Screw

M12 x 156mm Hilti Expansion Anchor

Residential including stairs and landings but excluding external balconies and edges of roofs

21.52mm

L21S Series

M14 S/S Hex Head Screw

M12 x 156mm Hilti Expansion Anchor

Commercial areas not susceptible to overcrowding

25.52mm

L25S Series

M14 S/S Hex Head Screw

M12 x 156mm Hilti Expansion Anchor

Commercial areas susceptible to overcrowding

Fixed To Concrete Base Mounted 12mm

B5S Series

M12 S/S Socket Head Cap Screw

M8 x 95mm Hilti Expansion Anchor

Residential including stairs and landings but excluding external balconies and edges of roofs

15mm

B6S Series

M12 S/S Socket Head Cap Screw

M8 x 95mm Hilti Expansion Anchor

Residential external balconies, edges of roofs, stairs and landings

19mm

B7S Series

M12 S/S Socket Head Cap Screw

M8 x 95mm Hilti Expansion Anchor

Commercial areas susceptible to overcrowding

17.52mm

L68S Series

M14 S/S Hex Head Screw

M12 x 156mm Hilti Expansion Anchor

Residential including stairs and landings but excluding external balconies and edges of roofs

21.52mm

L21S Series

M14 S/S Hex Head Screw

M12 x 156mm Hilti Expansion Anchor

Commercial areas not susceptible to overcrowding

25.52mm

L25S Series

M14 S/S Hex Head Screw

M12 x 156mm Hilti Expansion Anchor

Commercial areas susceptible to overcrowding

Fixed To Steel Side Mounted 12mm

B5S Series

M12 S/S Socket Head Cap Screw

M8 x 95mm Hilti Expansion Anchor

Residential including stairs and landings but excluding external balconies and edges of roofs

15mm

B6S Series

M12 S/S Socket Head Cap Screw

M8 x 95mm Hilti Expansion Anchor

Residential external balconies, edges of roofs, stairs and landings

19mm

B7S Series

M12 S/S Socket Head Cap Screw

M8 x 95mm Hilti Expansion Anchor

Commercial areas not susceptible to overcrowding

17.52mm

L68S Series

M14 S/S Hex Head Screw

M12 x 156mm Hilti Expansion Anchor

Residential including stairs and landings but excluding external balconies and edges of roofs

21.52mm

L21S Series

M14 S/S Hex Head Screw

M12 x 156mm Hilti Expansion Anchor

Commercial areas not susceptible to overcrowding

25.52mm

L25S Series

M14 S/S Hex Head Screw

M12 x 156mm Hilti Expansion Anchor

Commercial areas not susceptible to overcrowding

Fixed To Concrete Side Mounted 12mm

B5S Series

M12 S/S Socket Head Cap Screw

M8 x 95mm Hilti Expansion Anchor

Residential including stairs and landings but excluding external balconies and edges of roofs

15mm

B6S Series

M12 S/S Socket Head Cap Screw

M8 x 95mm Hilti Expansion Anchor

Residential external balconies, edges of roofs, stairs and landings

19mm

B7S Series

M12 S/S Socket Head Cap Screw

M8 x 95mm Hilti Expansion Anchor

Residential external balconies, edges of roofs, stairs and landings

17.52mm

L68S Series

M14 S/S Hex Head Screw

M12 x 156mm Hilti Expansion Anchor

Residential including stairs and landings but excluding external balconies and edges of roofs

21.52mm

L21S Series

M14 S/S Hex Head Screw

M12 x 156mm Hilti Expansion Anchor

Commercial areas not susceptible to overcrowding

25.52mm

L25S Series

M14 S/S Hex Head Screw

M12 x 156mm Hilti Expansion Anchor

Commercial areas not susceptible to overcrowding

All the data included within this table is dependant on correct installation of the base shoe plus actual glass strengths. Based on 1100mm Balustrade Heights anchored 300mm on center to concrete or steel substrates.

For more information call FREE on 00 800 0421 6144 (UK & Europe) | Fax FREE on 00 800 0262 3299

Email: [email protected] | www.taper-loc.co.uk

15

New!

TAPER-LOC®XA

Ordering Information for TAPER-LOC®XA Installation Components New!

TAPER-LOC®XA Taper Sets in two sizes for monolithic or laminated toughened glass

Something good just got better

The TAPER-LOC®XA System gives you choices because it will accommodate types and thicknesses of glass panels used in your balustrade project.

Top Load Gasket in Two Sizes

The Taper Sets for monolithic glazing will work with 12 and 15mm thick panels. Laminated panels from 17.52 and 21.52mm thick can be used with another set of Tapers specifically for laminated glass. The Taper Sets are specific to monolithic and laminated glazing types, as are the Glass Setting Strips with pre-positioned adhesive strips.

Taper Sets in Two Sizes for Monolithic or Laminated Toughened Glass

You also have choices of heavy base shoe in pre-drilled base mount or fascia mount standard lengths. The Setting Base that is inserted into the Heavy Base Shoe is specific to the base shoe being used, and is not interchangeable. To finish off the installation use our Top Load Gasket. This black coloured vinyl rolls into the cavity between the glass and the base shoe to keep out water and debris. If you are planning your first balustrade project and would like ordering assistance, contact CRL at 00 800 0421 6144. For email go to the home page of crlaurence.co.uk and click on Contact Us.

TAPER-LOC®XA lets you compensate for uneven surfaces so glass panels can be perfectly aligned. • Next generation Taper Sets install easily using our TLK12 Installation/Removal Tool and new TLXAAT Angle Adjustment Tool • Taper Sets for monolithic and laminated toughened glass work with our most commonly used aluminium base shoe TLXATSM

Taper Set for Monolithic Toughened Glass

TLXATSL

Taper Set for Laminated Toughened Glass

TLK12

When job site conditions aren’t perfect it’s good to know you can rely on a product that will help you achieve results that are. That’s what you get with TAPER-LOC®XA. ‘A’ stands for Adjustable and TAPER-LOC®XA is especially designed to allow vertical adjustment of the glass panels to perfect plumb, no matter how uneven the floor beneath the base shoe. Glass setting strips adhered to the lower edges of the panel rest on a setting base that allows you to adjust the glass panel to plumb, even if the base shoe segments do not align perfectly.

Glass Setting Strip in Two Sizes Setting Base in Four Widths for Heavy Base Shoe Heavy Base Shoe in Four Widths

CAT. NO.

DESCRIPTION

TLXATSM Monolithic Glazing TLXATSL Laminated Glazing

Taper Sets

BSG100 Monolithic Glazing LBSG100 Laminated Glazing

Top Load Gaskets

TLXAM0N0 Monolithic Glazing TLXALAM Laminated Glazing

Glass Setting Strips

TLXA12SB Monolithic Glazing

Setting Bases

for B5S, B5G, B5T Base Shoe Types

• In 254mm Pieces (Minimum Order: 10)

• In Boxes of 20 Sets of One Kind

• in 30.5m Rolls (Black)

• In 1.45m Lengths (Minimum Order: 10)

TLXA15SB Monolithic Glazing for B6S, B6N Base Shoe Types

TLXA17SB Laminated Glazing

Unlike the original TAPER-LOC® System, the ‘XA’ Taper Sets are placed on both sides of the glass panel. That gives you the flexibility to perfectly align and plumb the glass panels in every segment. The addition of our TLXAAT Angle Adjustment Tool even lets you make adjustments to panels that are already installed on balconies or elevated concourses without the need for scaffolding or inconveniently leaning over the balustrade.

for L68S Base Shoe Type

TLXA21SB Laminated Glazing for L21S Base Shoe Type B5S

B6S

B5S10D Monolithic Glazing 3.05m

Heavy Base Shoe

B6S10D Monolithic Glazing 3m

• In Pre-Drilled Base Mount Configuration (Other standard lengths and Fascia Mount configurations of Heavy Base Shoe can be found online at crlaurence.co.uk)

L68S10D Laminated Glazing 3m L21S10D Laminated Glazing 3m

Installation/Removal Tool

L68S

L21S

TLXAAT

Angle Adjustment Tool

For more information call FREE on 00 800 0421 6144 (UK & Europe) | Fax FREE on 00 800 0262 3299

New!

Email: [email protected] | www.taper-loc.co.uk

Typical Installations

LINE OF FINISHED CONCRETE LINE OF FINISHED CONCRETE

CRL BSG100 CRL BSG100 ROLL IN VINYL ROLL IN VINYL CRL DRY GLAZED CRL DRY GLAZED TAPERLOC SYSTEM TAPERLOC SYSTEM CRL BASE SHOE WITH CRL BASE SHOE WITH CLADDING CLADDING 107.9mm

CRL EBA334 HILTI HSL3 CRL EBA334 HILTI HSL3 ANCHOR INSTALLED CONCRETE CONCRETE ANCHOR INSTALLED 304.8mm ON CENTER TYPICAL 304.8mm ON CENTER TYPICAL 95.25mm MIN EDGE DISTANCE 95.25mm MIN EDGE DISTANCE

107.9mm

106.4mm

106.4mm

CRL DRY GLAZED CRL DRY GLAZED TAPERLOC SYSTEM TAPERLOC SYSTEM CRL BASE SHOE WITH CRL BASE SHOE WITH CLADDING CLADDING

TEMPERED GLASS TEMPERED GLASS PANELS PANELS

95.25mm

TEMPERED GLASS TEMPERED GLASS PANELS PANELS CRL BSG100 CRL BSG100 ROLL IN VINYL ROLL IN VINYL

Concrete Substrate Typical Fascia Mount Detail

95.25mm

Concrete Substrate Typical Surface Mount Detail

LINE OF FINISHED CONCRETE LINE OF FINISHED CONCRETE

Steel Tube Substrate Typical Surface Mount Detail ANCHOR SPACING WILL DEPEND ON MOUNTING SUBSTRATE AND REGION OF PROJECT SUBSTRATE AND REGION OF PROJECT

CRL EBA334 HILTI HSL3 CONCRETE ANCHOR INSTALLED 304.8mm ON CENTER TYPICAL 95.25mm MIN EDGE DISTANCE

82.6mm82.6mm

CONCRETE SLAB 4000 PSI MIN

CONCRETE SUBSTRATE TYPICAL SURFACE MOUNT DETAIL CONCRETE SUBSTRATE ANCHOR SPACING WILL DEPEND ON MOUNTING TYPICAL SURFACE MOUNT DETAIL SUBSTRATE AND REGION OF PROJECT CONCRETE SUBSTRATE ANCHOR SPACING WILL DEPEND ON MOUNTING SUBSTRATE AND REGION OF PROJECT

TYPICAL FACISA MOUNT DETAIL

ANCHOR SPACING WILL DEPEND ON MOUNTING SUBSTRATE AND REGION OF PROJECT

CRL BASE SHOE WITH CLADDING

CRL SOCKET HEAD CAP SCREW 12.7-330.2 X 38.1mm LONG INSTALLED 304.8mm ON CENTER 65mm TYPICAL

CONCRETE SLAB 4000 PSI MIN 4.8mm FILLET WELD CONCRETE SLAB 4000 PSI MIN

STEEL STRINGER ATTACHMENT

CRL DRY GLAZED TAPERLOC SYSTEM CRL DRY GLAZED TAPERLOC SYSTEM CRL BASE SHOE WITH CLADDING CRL BASE SHOE WITH CLADDING

CRL WELD BLOCK INSTALLED 65mm 304.8mm ON CENTER TYPICAL

INSTALLATION GUIDELINE: DURING THE INSTALLATION PROCESS MAKE SURE A CERTIFIED WELDER APPLIES A 4.8mm CONTINUOUS FILLET WELD ON TWO SIDES OF THE WELD BLOCK

CONCRETE SUBSTRATE TYPICAL FACISA MOUNT DETAIL CONCRETE SUBSTRATE ANCHOR SPACING WILL DEPEND ON MOUNTING TYPICAL FACISA MOUNT DETAIL SUBSTRATE REGION OF PROJECT STEEL TUBEANDSUBSTRATE ANCHOR SPACING WILL DEPEND ON MOUNTING

SUBSTRATESURFACE AND REGION OFMOUNT PROJECT TYPICAL DETAIL

12" ON CENTER ANCHOR SPACING TYPICAL

CONCRETE SUBSTRATE CONCRETE SUBSTRATE TYPICAL FACISA MOUNT DETAIL TYPICALANCHOR FACISA MOUNT DETAIL SPACING WILL DEPEND ON MOUNTING

CRL SOCKET HEAD CAP SCREW 12.7-330.2 X 38.1mm LONG INSTALLED 304.8mm ON CENTER TYPICAL 4.8mm FILLET WELD

TAPERLOC SYSTEM CRL BASE SHOE WITH CRL BSG100 CLADDING ROLL IN VINYL CRL BASE SHOE WITH CLADDING CRL SOCKET HEAD CAPGLAZED CRL DRY SCREW 12.7-330.2 X 38.1mm TAPERLOC SYSTEM CRL SOCKET HEAD304.8mm CAP LONG INSTALLED ON SCREW 38.1mm CENTER12.7-330.2 TYPICAL CRLXBASE SHOE WITH LONG INSTALLED 304.8mm ON CLADDING CRL WELD BLOCK INSTALLED CENTER TYPICAL 304.8mm ON CENTER TYPICAL CRL WELD BLOCK INSTALLED 304.8mm ON CENTER TYPICAL

4.8mm FILLET WELD STEEL STRINGER ATTACHMENT STEEL STRINGER C-CHANNEL STEEL STRINGER ATTACHMENT ATTACHMENT 65.1mm

INSTALLATION GUIDELINE: DURING THE INSTALLATION PROCESS INSTALLATION GUIDELINE: MAKE SURE A CERTIFIED WELDER APPLIES INSTALLATION GUIDELINE: DURING INSTALLATION PROCESS ADuring 4.8mmTHE CONTINUOUS FILLET WELD ON the installation process, MAKE SURE AOF CERTIFIED WELDER TWO SIDES THE WELD BLOCKAPPLIES make sure a certified welder applies A 4.8mm CONTINUOUS FILLET WELD ON a 4.8mm continuous fillet weld on TWO SIDES OF THE WELD BLOCK

two sides of the weld block.

STEEL TUBE SUBSTRATE TYPICAL SURFACE MOUNT DETAIL STEEL TUBE SUBSTRATE 12" ON CENTER ANCHOR SPACING TYPICAL TYPICAL SURFACE MOUNT DETAIL STEEL C-CHANNEL SUBSTRATE 12" ON CENTER ANCHOR SPACING TYPICAL

Steel Tube Substrate Typical Fascia Mount Detail

12" ON CENTER ANCHOR SPACING TYPICAL

TEMPERED GLASS PANELS TEMPERED GLASS PANELS CRL BSG100 ROLL IN VINYL CRL BSG100 ROLL IN VINYL

CRL SOCKET HEAD CAP SCREW 12.7-330.2 X 38.1mm CRL SOCKET HEAD304.8mm CAP LONG INSTALLED SCREW 12.7-330.2 X 38.1mm ON CENTER TYPICAL LONG INSTALLED 304.8mm ON CENTER TYPICAL

STEEL STRINGER C-CHANNEL ATTACHMENT STEEL STRINGER C-CHANNEL ATTACHMENT

CRL DRY GLAZED TAPERLOC SYSTEM CRL DRY GLAZED TAPERLOC SYSTEM CRL BASE SHOE WITH CLADDING CRL BASE SHOE WITH CLADDING

65.1mm

INSTALLATION GUIDELINE: When attaching directly to steel, make sure the steel thickness is 9.5mm thick min. If not use CRL’s thick weld blocks.

65.1mm

STEEL C-CHANNEL SUBSTRATE TYPICAL SURFACE SUBSTRATE MOUNT DETAIL STEEL C-CHANNEL 12" ON CENTER ANCHOR SPACING TYPICAL TYPICAL SURFACE MOUNT DETAIL

Concrete Substrate Typical Concrete Inset Detail

LINE OF FINISH FLOOR

CRL BSG100 ROLL IN VINYL

12" ON CENTER ANCHOR SPAC

12" ON CENTER ANCHOR SPACING TYPICAL

TYPICAL SURFACE MOUNT DETAIL Steel L-Angle Substrate Typical Surface Mount Detail TEMPERED GLASS PANELS

STEEL TUBE STEEL TUBE SUBSTR TYPICAL S TYPICAL12"SURFACE ON CENTER A

ANCHOR SPACING WILL DEPEND ON MOUNTING SUBSTRATE AND REGION OF PROJECT SUBSTRATE AND REGION OF PROJECT

107.95mm 107.95mm

CRL DRY GLAZED TAPERLOC SYSTEM

107.95mm

CONCRETE SLAB 4000 PSI MIN CONCRETE SLAB 4000 PSI MIN CRL EBA334 HILTI HSL3 65mmANCHOR INSTALLED CONCRETE CRL EBA334 HSL3 304.8mm ONHILTI CENTER TYPICAL CONCRETE ANCHOR INSTALLED 95.25mm MIN EDGE DISTANCE 304.8mm ON CENTER TYPICAL 95.25mm MIN EDGE DISTANCE

CRL EBA334 HILTI HSL3 CONCRETE ANCHOR INSTALLED CRL EBA334 HSL3 304.8mm ONHILTI CENTER TYPICAL CONCRETE ANCHOR INSTALLED 95.25mm MIN EDGE DISTANCE 304.8mm ON CENTER TYPICAL 95.25mm MIN EDGE DISTANCE

CRL BSG100 ROLL IN VINYL

119.1mm 119.1mm

CRL DRY GLAZED TAPERLOC SYSTEM LINE OF FINISHED CONCRETE CRL BASE SHOE WITH CLADDING LINE OF FINISHED CONCRETE

LINE OF FINISHED CONCRETE

CONCRETE SLAB 4000 PSI MIN

CRL BSG100 ROLL IN VINYL

107.9mm 107.9mm

CRL EBA334 HILTI HSL3 CONCRETE ANCHOR INSTALLED 304.8mm ON CENTER TYPICAL 95.25mm MIN EDGE DISTANCE

TEMPERED GLASS PANELS

107.9mm

CRL BASE SHOE WITH CLADDING

106.4mm 106.4mm

106.4mm

CRL DRY GLAZED TAPERLOC SYSTEM

95.25mm

CRL BSG100 ROLL IN VINYL

TEMPERED GLASS PANELS TEMPERED GLASS PANELS CRL BSG100 ROLL IN VINYL CRL BSG100 ROLL IN VINYL

TEMPERED GLASS PANELS

95.25mm 95.25mm

LINE OF FINISHED CONCRETE

119.1mm

TEMPERED GLASS PANELS

STEEL STRINGER STEEL STRINGER ATTACHMENT ATTACHMENT

TEMPERED GLASS PANELS TEMPERED GLASS CRL BSG100 PANELS ROLL IN VINYL CRL BSG100 ROLL IN VINYL CRL DRY GLAZED TEMPERED GLASS TAPERLOC SYSTEM PANELS CRL DRY GLAZED

LINE OF FINISHED CONCRETE LINE OF FINISHED CONCRETE

65mm 65mm

CRL EBA334 HILTI HSL3 CRL EBA334 HILTI HSL3 ANCHOR INSTALLED CONCRETE CONCRETE ANCHOR INSTALLED 304.8mm ON CENTER TYPICAL 304.8mm ON CENTER TYPICAL 95.25mm MIN EDGE DISTANCE 95.25mm MIN EDGE DISTANCE

CONCRETE SUBSTRATE CONCRETE SUBSTRATE TYPICAL SURFACE MOUNT DETAIL TYPICALANCHOR SURFACE SPACINGMOUNT WILL DEPEND DETAIL ON MOUNTING

TEMPERED GLASS PANELS TEMPERED GLASS CRL BSG100 PANELS ROLL IN VINYL CRL BSG100 ROLL IN VINYL CRL DRY GLAZED TAPERLOC SYSTEM CRL DRY GLAZED TAPERLOC SYSTEM CRL BASE SHOE WITH CLADDING CRL BASE SHOE WITH CLADDING

CONCRETE SLAB CONCRETE SLAB 4000 PSI MIN 4000 PSI MIN

CONCRETE SLAB CONCRETE SLAB 4000 PSI MIN 4000 PSI MIN

82.6mm

82.6mm

4.8mm FILLET WE 4.8mm FILLET WELD

UNT DETAIL

OUNTING

17

CRL DRY GLAZED TAPERLOC SYSTEM CRL SOCKET HEAD CAP SCREW 12.7-330.2 X 38.1mm LONG INSTALLED 304.8mm ON CENTER TYPICAL

TEMPERED GLASS PANELS TEMPERED GLASS CRL BSG100 PANELS ROLL IN VINYL CRL BSG100 CRL BSG100 IN VINYL ROLL ROLL IN VINYL CRL DRY GLAZED TAPERLOC SYSTEM CRL DRY GLAZED CRL DRY GLAZED TAPERLOC SYSTEM TAPERLOC SYSTEM CRL SOCKET HEAD CAP SCREW 12.7-330.2 X 38.1mm CRLINSTALLED SOCKET HEAD CAP LONG 304.8mm SCREW ON 12.7-330.2 X TYPICAL 38.1mm CENTER LONG INSTALLED 304.8mm ON CENTER TYPICAL

LINE OF FINISH FLOOR LINE OF FINISH FLOOR

TEMPERED GLASS PANELS LINE OF FINISHED CONCRETE

CRL WELD BLOCK INSTALLED 304.8mm ON CENTER TYPICAL CRL WELD BLOCK INSTALLED 304.8mm ON CENTER TYPICAL 4.8mm FILLET WELD

CRL WELD BLOCK INSTALLED 304.8mm ON CENTER TYPICAL

4.8mm FILLETSTEEL WELDL-ANGLE

4000 PSI CONC MIN CRL TAPERED PROFILE BASE SHOE FOR EMBED/RECESSED APPLICATIONS

STEEL L-ANGLE

4.8mm FILLET WELD STEEL L-ANGLE

INSTALLATION GUIDELINE: During the installation process, make sure a certified welder applies a 4.8mm continuous fillet weld on two sides of the weld block.

STEEL L-LANGLE SUBSTRATE TYPICAL FASCIA MOUNT DETAIL

STEEL MOUNTING/ FORMING PLATE INSTALLATION GUIDELINE: DURING THE INSTALLATION PROCESS

INSTALLATION GUIDELINE: DURING THE INSTALLATION PROCESS MAKE SURE A CERTIFIED WELDER APPLIES A 4.8mm CONTINUOUS FILLET WELD ON TWO SIDES OF THE WELD BLOCK

INSTALLATION GUIDELINE: MAKE SURE A CERTIFIED WELDER APPLIES INSTALLATION GUIDELINE: DURING INSTALLATION PROCESS A 4.8mmTHE CONTINUOUS FILLET WELD ON STEELspacing L-LANGLE SUBSTRATE Anchor will depend on mounting MAKE SURE AOF CERTIFIED WELDER TWO SIDES THE WELD BLOCKAPPLIES TYPICAL CONCRETE INSETDETAIL DETAIL A 4.8mm CONTINUOUS FILLET substrate andFASCIA region ofSUBSTRATE project. TYPICAL MOUNT WELD ON STEEL L-LANGLE

CONCRETE SUBSTRATE TYPICAL FASCIA MOUNT DETAIL

TWO SIDES OF THE WELD BLOCK 12" ON CENTER ANCHOR SPACING TYPICAL TO STEEL ANGLE ANCHOR SPACING WILL DEPEND ON MOUNTING 12" ON CENTER ANCHOR TYPICAL TO STEEL ANGLE SUBSTRATE AND REGION SPACING OF PROJECT

12" ON CENTER ANCHOR SPACING TYPICAL TO STEEL ANGLE

For more information call FREE on 00 800 0421 6144 (UK & Europe) | Fax FREE on 00 800 0262 3299

Email: [email protected] | www.taper-loc.co.uk

Cap Rails

19

Handrails

Cap Rails are available to suit a huge range of Glass Thicknesses, please call CRL. WOOD WOOD SHAPES SHAPES FOR FOR 1/2" 1/2" TO TO 5/8" 5/8" GLASS GLASS WOOD WOOD WOOD SHAPES WOOD WOOD SHAPES SHAPES FOR SHAPES SHAPES FOR 1/2" FOR 1/2" FOR TO FOR 1/2" TO 5/8" 1/2" 1/2" TO 5/8" GLASS TO 5/8" TO GLASS 5/8" 5/8" GLASS GLASS GLASS

12mm 12mm 12mm12mm

12mm

12mm 12mm 12mm 12mm 12mm 12mm 12mm12mm 12mm 12mm 12mm 12mm 12mm12mm

12mm 12mm 12mm 12mm 12mm 12mm12mm 12mm 12mm 12mm 12mm12mm

12mm 12mm

12mm 12mm

12mm 12mm 12mm12mm

12mm 12mm 12mm 12mm 12mm 12mm 12mm 12mm 12mm12mm 12mm 12mm 12mm 12mm12mm

12mm

GRADE 316 STAINLESS STEEL

61.9mm

61.9mm

61.9mm 39.7mm

61.9mm 39.7mm

61.9mm 39.7mm

46mm 23.8mm

46mm 39.7mm 23.8mm 61.9mm 46mm 39.7mm 23.8mm 61.9mm 46mm 39.7mm

23.8mm 58.7mm 23.8mm 58.7mm 46mm 23.8mm 23.8mm 58.7mm 46mm 23.8mm 23.8mm 58.7mm 46mm 23.8mm

58.7mm 23.8mm

58.7mm 23.8mm

39.7mm 23.8mm

58.7mm 23.8mm

39.7mm 114.3mm

114.3mm 39.7mm

114.3mm 39.7mm

54mm 52.4mm 34.9mm

52.4mm 54mm 34.9mm 93.7mm 52.4mm 77.8mm 34.9mm 93.7mm 52.4mm 77.8mm 34.9mm 93.7mm 34.9mm 77.8mm 93.7mm 34.9mm 77.8mm 93.7mm 114.3mm 77.8mm 34.9mm 93.7mm 39.7mm 114.3mm 77.8mm 93.7mm 39.7mm 114.3mm 77.8mm

54mm 52.4mm

52.4mm 54mm

52.4mm 54mm

54mm 74.6mm

39.7mm 54mm 74.6mm

74.6mm 39.7mm

74.6mm

39.7mm

74.6mm 39.7mm

60.3mm 39.7mm 74.6mm 60.3mm 39.7mm 74.6mm

27mm 60.3mm

60.3mm 39.7mm 27mm

27mm 60.3mm

27mm 47.6mm 60.3mm 27mm 47.6mm 60.3mm 27mm

47.6mm 27mm 47.6mm

47.6mm

47.6mm

47.6mm

12mm

114.3mm 39.7mm

63.5mm 63.5mm 63.5mm 63.5mm 63.5mm63.5mm 63.5mm 114.3mm114.3mm 50.8mm 50.8mm 114.3mm114.3mm114.3mm114.3mm 114.3mm 50.8mm 50.8mm 50.8mm50.8mm 50.8mm

39.7mm

50.8mm 50.8mm 50.8mm 50.8mm 50.8mm50.8mm 50.8mm

76.2mm 76.2mm 76.2mm 44.45mm44.45mm 63.5mm76.2mm 63.5mm76.2mm 76.2mm76.2mm 44.45mm44.45mm44.45mm 44.45mm 44.45mm 63.5mm 63.5mm 63.5mm63.5mm 63.5mm 50.8mm 50.8mm 50.8mm 50.8mm 50.8mm50.8mm 50.8mm

A Selection of Cap Rails available from CRL

A full range of Post Systems available -

CRL Hand Railing

372 CAP 372 CAP RAIL 373 CAP 373 RAIL CAP RAIL 347 CAP 347 RAIL CAP RAIL 346 CAP 346CAP RAIL CAPCAP RAIL CAP RAIL WCR30 CAP RAIL 397 CAP 397 CAP CAP RAIL WCR20 CAP RAIL CAP RAIL WCR25 CAP RAIL 372 CAP 372RAIL CAP RAIL 372RAIL CAP RAIL 372372 CAP RAIL CAP RAIL RAIL 373 RAIL CAP 373 CAP RAIL 373 CAP RAIL 373373 CAP RAIL CAP RAIL RAIL 347 CAP 347 RAIL 347 RAIL 347 347 CAP RAIL CAP RAIL RAIL 346 CAP 346 CAP RAIL 346 CAP RAIL 346346 CAP RAIL CAP RAIL RAIL WCR30 CAP WCR30 RAILWCR30 CAP RAIL WCR30 CAP WCR30 RAIL WCR30 CAP CAP RAIL RAIL 397 CAP 397 CAP RAIL 397 CAP RAIL 397397 CAP RAIL CAP RAIL RAIL WCR20 CAP WCR20 RAILWCR20 CAP RAIL WCR20 CAP WCR20 RAIL WCR20 CAP CAP RAIL RAIL WCR25 CAP WCR25 RAILWCR25 CAP RAIL WCR25 CAP WCR25 RAIL WCR25 CAP CAP RAIL RAIL 3" DIA3" DIA 1-5/8"1-5/8" X 4-1/2" X 4-1/2" 2-1/2"2-1/2" DIA DIA 2" DIA2" DIA 3" DIA3" DIA 2-1/8"2-1/8" x 1-3/4" x 1-3/4" 2" DIA2" DIA 2-1/2"2-1/2" DIA DIA

39.7mm

61.9mm

39.7mm

61.9mm

23.8mm

46mm

46mm

23.8mm

58.7mm

• Ready to Install

OOD

WOOD

•

12mm

12mm 12mm 12mm12mm

12mm

12mm 12mm

12mm 12mm 12mm12mm

12mm

12mm

12mm

12mm 12mm 12mm12mm

12mm

12mm

12mm

12mm 12mm 12mm12mm

12mm

Contact technical sales for full details

12mm

12mm 12mm 12mm12mm

12mm

12mm

12mm

12mm 12mm 12mm12mm

12mm

12mm

12mm

12mm 12mm 12mm12mm

12mm

12mm

12mm

12mm 12mm 12mm12mm

38.1mm

38.1mm

7.9mm 38.1mm

7.9mm 41.3mm 38.1mm

7.9mm 41.3mm 38.1mm

38.1mm 7.9mm 41.3mm

38.1mm 7.9mm 4.8mm 41.3mm

4.8mm 7.9mm 41.3mm

4.8mm 38.1mm

41.3mm 4.8mm 38.1mm 7.9mm 4.8mm 41.3mm

38.1mm

38.1mm 4.8mm

EUHR20PS

EUHR20BS 12mm

38.1mm 4.8mm 38.1mm

38.1mm 38.1mm

4.8mm 38.1mm 38.1mm 4.8mm 38.1mm

4.8mm 38.1mm

38.1mm 4.8mm63.5mm

63.5mm 4.8mm

63.5mm 38.1mm 4.8mm

4.8mm 63.5mm

63.5mm

63.5mm

22.2mm 22.2mm 22.2mm 22.2mm 22.2mm22.2mm 22.2mm22.2mm 22.2mm22.2mm 22.2mm 22.2mm 22.2mm 22.2mm22.2mm 22.2mm 22.2mm 22.2mm 22.2mm22.2mm 22.2mm

63.5mm 98.4mm

50.8mm 98.4mm

98.4mm 50.8mm 98.4mm

50.8mm 98.4mm 50.8mm

50.8mm 98.4mm

85.7mm 50.8mm

85.7mm 36.5mm 85.7mm

85.7mm 36.5mm

36.5mm 85.7mm 36.5mm

36.5mm 85.7mm

36.5mm 71.4mm

36.5mm 71.4mm

71.4mm

85.7mm 50.8mm 98.4mm

A full line of accessories to complete the installation 372 CAP RAIL 372 CAP RAIL 373 CAP RAIL 373 CAP RAIL 346 CAP RAIL 347 CAP RAIL 347 CAP RAIL 346 CAP RAIL WCR30 CAP WCR30 RAIL CAP RAIL397 CAP RAIL CAP RAIL AIL WCR25 WCR25 RAIL CAP RAIL 347 CAP RAIL AP RAILCAP • DIA CRL Premium Cap Rails397 are fabricated from1-5/8" 16X 4-1/2" and 3" DIA 1-5/8"18 X 4-1/2" 2" DIA 2" DIA 2-1/2" DIA 2-1/2" DIA 3" DIA 3" DIA 2-1/8" x 1-3/4" 2-1/8" x 1-3/4" 3" DIA 2-1/2" DIA 2-1/2" 2-1/2" DIA " DIA FOR 1/2" GLASS FOR 1/2" GLASS FOR 1/2" GLASS FOR 1/2" GLASS FOR 1/2" GLASS FOR 1/2" GLASS FOR 1/2" GLASS FOR 1/2" GLASS FOR 1/2" TO FOR 5/8" 1/2" GLASS TO 5/8" GLASS FOR 1/2" GLASS FOR 1/2" GLASS LASS 1/2" TOFOR 5/8"1/2" GLASS TO 1/2" 5/8" GLASS 2" GLASS FOR GLASS gauge material, depending on the diameter. WOOD WOOD WOOD WOOD WOOD WOOD WOOD WOOD WOOD WOOD WOOD WOOD WOOD WOOD

114.7mm 114.7mm 114.7mm114.7mm114.7mm114.7mm 114.7mm 88.9mm 88.9mm 76.2mm 76.2mm 88.9mm 88.9mm 88.9mm88.9mm 88.9mm 76.2mm 76.2mm 76.2mm76.2mm 76.2mm

71.4mm 23.8mm

23.8mm

12mm

71.4mm 23.8mm

58.7mm 23.8mm 71.4mm

12mm

58.7mm 23.8mm

58.7mm

12mm

58.7mm23.8mm

58.7mm 11.1mm

12mm

58.7mm 11.1mm

11.1mm 58.7mm 11.1mm

11.1mm 46mm

12mm

11.1mm 46mm

46mm 7.9mm

12mm

46mm 11.1mm

46mm 7.9mm

34.9mm 7.9mm 46mm 7.9mm

12mm

34.9mm 7.9mm

34.9mm 7.9mm

7.9mm 34.9mm

12mm

34.9mm 9.5mm

12mm

34.9mm 9.5mm

33.3mm 9.5mm 34.9mm 9.5mm

33.3mm 9.5mm

12mm

9.5mm 33.3mm

•

9.5mm 33.3mm

12mm

33.3mm

33.3mm

12mm

12mm 12mm

12mm

33.3mm

12mm

• A variety of sizes and finishes available to accommodate monolithic and laminated toughened glass

46mm

63.5mm 63.5mm 63.5mm 50.8mm 50.8mm 63.5mm 63.5mm 63.5mm63.5mm 50.8mm 50.8mm 50.8mm50.8mm 50.8mm 42.9mm 42.9mm 38.1mm 38.1mm 42.9mm 42.9mm 42.9mm42.9mm 42.9mm 38.1mm 38.1mm 38.1mm38.1mm 38.1mm

71.4mm 23.8mm

23.8mm

58.7mm

23.8mm

114.3mm

39.7mm

39.7mm

114.3mm

77.8mm

93.7mm

34.9mm

77.8mm

93.7mm

34.9mm

52.4mm

54mm

52.4mm

54mm

61.9mm

74.6mm

Premium cap rails are manufactured by bump-forming to ensure reduced spring back

74.6mm

•

39.7mm 39.7mm

39.7mm

60.3mm 46mm

27mm

23.8mm

3" DIA3" DIA 3" DIA 3" DIA 3" DIA1-5/8"1-5/8" X 4-1/2" 1-5/8" X 4-1/2" 1-5/8" X1-5/8" 4-1/2" X 4-1/2" X 4-1/2"2" DIA2" DIA DIA2-1/2" DIA2-1/2" DIA 2-1/2" DIADIA 2" DIA 2" DIA 2"2-1/2" DIA2-1/2" 3" DIA2-1/8"2-1/8" 3" DIA 3" DIA x 1-3/4" 2-1/8" x 1-3/4" 2-1/8" x 2-1/8" 1-3/4" x 1-3/4" x 1-3/4" 2" DIA2-1/2"2-1/2" 2" DIA2" DIA 2" DIA 2" DIA DIA2-1/2" 2-1/2" DIA2-1/2" DIA DIADIA 3" DIA3" DIA FOR 1/2" FOR 1/2" FOR 1/2" FORGLASS 1/2"GLASS GLASS FOR 1/2" FORGLASS GLASS 1/2" GLASS GLASS FOR 1/2" FORGLASS 1/2" GLASS FOR TO 5/8" FOR 1/2" TOGLASS 5/8" GLASS FOR 1/2" FOR 1/2" CRL Cap Rails areFOR available in diameters ranging from All CRL Hand Railing Tubing is formed using precision FOR 1/2" TO 5/8" GLASS FOR 1/2" TO5/8" 5/8" GLASS FOR 1/2" TO 5/8" GLASS FOR 1/2" TO 5/8" GLASS FOR 1/2" FORGLASS GLASS 1/2" FORGLASS GLASS FOR 1/2"FOR GLASS 1/2" 1/2" GLASS GLASS FORGLASS 1/2" FORGLASS GLASS 1/2" FOR GLASS FOR 1/2"FOR GLASS 1/2" 1/2" GLASS FOR GLASS 1/2" FOR 1/2" FOR GLASS FOR 1/2"FOR GLASS 1/2" FOR 1/2" GLASS 1/2" FOR GLASS 1/2" FOR FOR 1/2" FOR GLASS 1/2" 1/2" GLASS GLASS FOR 1/2" TO 5/8" FOR GLASS 1/2" TO GLASS 1/2" TO FOR 5/8" FOR 1/2" GLASS TO 1/2" 5/8" TO1/2" GLASS 5/8"5/8" GLASS FOR 1/2" FORGLASS 1/2" FOR GLASS FOR 1/2"FOR GLASS 1/2"1/2" GLASS GLASS FORTO 1/2" TO 5/8" FOR GLASS 1/2" TO GLASS 1/2" FOR 5/8" FOR 1/2" GLASS TO 1/2" 5/8" TOFOR GLASS 5/8"5/8" GLASS FOR 1/2" TO 5/8" FOR GLASS 1/2" TO GLASS 1/2" TO FOR FOR 1/2" GLASS TO 1/2" 5/8" TOFOR GLASS 5/8"5/8" GLASS WOOD WOOD WOOD WOOD WOOD WOOD WOOD WOOD WOOD WOOD WOOD WOOD WOOD WOOD WOOD WOOD WOOD WOOD WOOD WOOD WOOD WOOD WOOD WOOD WOOD WOOD WOOD WOOD WOOD WOOD WOOD WOOD WOOD WOOD WOOD WOOD WOOD WOOD WOOD WOOD WOOD WOOD WOOD WOOD WOOD WOOD WOOD WOOD WOOD WOOD WOOD WOOD WOOD WOOD EUGR20BS 38.1 to 101.6mm, as wellWOOD asWOOD oval and square profiles in a wide tooling to maintain uniform diameters, allowing for 50.8mm 50.8mm HAPES FOR 1/2" FOR TO1/2" 5/8"TO GLASS 5/8" GLASS range of architectural finishes. A full line of accessories to smooth hairline transitions at splices and end caps. 63.5mm 63.5mm 63.5mm 76.2mm 76.2mm 44.45mm 63.5mm 63.5mm 114.3mm 114.3mm 50.8mm 50.8mm complete the installation are also44.45mm available. mm EUL10BS • High Quality STAINLESS STAINLESS STEEL STEEL SHAPES SHAPES FOR FOR 1/2" 1/2" TO TO 5/8" 5/8" GLASS GLASS STAINLESS STAINLESS STAINLESS STAINLESS STAINLESS STEEL STEEL SHAPES STEEL STEEL SHAPES STEEL SHAPES FOR SHAPES SHAPES FOR 1/2" FOR 1/2" FOR TO FOR 1/2" TO 5/8" 1/2" 1/2" TO 5/8" GLASS TO 5/8" TO GLASS 5/8" 5/8" GLASS GLASS GLASS

12mm

12mm 12mm 12mm 12mm 12mm 12mm 12mm 12mm12mm 12mm 12mm 12mm 12mm12mm

12mm

CRL Extruded Aluminium Cap rails have a standard wall GRUCR5 CAP GRUCR5 CAP RAIL GRUCF5 CAP RAIL GRUCF5 CAP RAIL GRUC5 CAP RAIL CAP RAIL GR15 GR15 CAP RAIL CAP RAIL GR16 GR16 CAP RAIL CAP RAIL GR20 GR20 CAP RAIL CAP GR25 RAIL GR25 GR25 CAP RAIL CAP RAIL GR30 GR30 CAP CAP GR35 GR35 CAP RAIL CAP RAIL GR40 GR40 CAP RAIL CAP RAIL GRUCR5 CAP GRUCR5 RAIL CAP RAILRAIL GRUCR5 GRUCR5 RAIL GRUCR5 CAP CAP RAIL RAIL GRUCF5 CAP GRUCF5 RAIL CAP RAILCAP GRUCF5 CAP GRUCF5 RAIL GRUCF5 CAP CAP RAIL RAIL GRUC5 GRUC5 CAP GRUC5 CAP RAIL GRUC5 GRUC5 CAP RAILGRUC5 CAP RAIL CAP RAIL RAIL GR15GR15 CAPGR15 CAP RAILGR15 CAP RAIL GR15 CAP RAIL CAP RAIL RAIL GR16 GR16 CAP GR16 CAP RAILGR16 CAP RAIL GR16 CAP RAIL CAP RAIL RAIL GR20 GR20 CAP GR20 CAP RAILGR20 CAP RAIL GR20 CAP RAIL CAP RAIL RAILGR25 CAPGR25 CAP RAILGR25 CAP RAIL GR25 CAP RAIL CAP RAIL RAIL GR30 GR30 CAP GR30 CAP RAILGR30 CAP RAIL GR30 CAP RAIL CAP RAIL RAILRAIL GR35RAIL GR35 CAPGR35 CAP RAILGR35 CAP RAIL GR35 CAP RAIL CAP RAIL RAIL GR40 GR40 CAP GR40 CAP RAILGR40 CAP RAIL GR40 CAP RAIL CAP RAIL RAIL X 7/8" 1-1/2" XPROFILE 7/8" PROFILE X 7/8" 1-1/2" 7/8" PROFILE thickness of 3.2mm 1-1/2" X 7/8" 7/8" PROFILE 1-1/2" DIA DIA 1.66" DIA 2"DIA 2" DIA2" DIA 2-1/2" DIA 3"DIA 3" DIA3" DIA 3-1/2" DIA4"DIA 4"1-1/2" DIA4"1-1/2" DIA 1-1/2" XPROFILE 7/8" PROFILE X 7/8" PROFILE 1-1/2" XXPROFILE 7/8" 1-1/2" 1-1/2" X1-1/2" 7/8" X1-1/2" PROFILE 7/8" PROFILE 1-1/2" XPROFILE 7/8" PROFILE X 7/8" PROFILE 1-1/2" XXPROFILE 7/8" 1-1/2" 1-1/2" X1-1/2" 7/8" X1-1/2" PROFILE 7/8" PROFILE X 7/8" 1-1/2" XPROFILE 7/8" 1-1/2" X1-1/2" PROFILE 7/8" X1-1/2" PROFILE 7/8" X 7/8" PROFILE PROFILE 1-1/2"1-1/2" DIA1-1/2" DIA1-1/2" DIA 1-1/2" DIA DIA1-1/2" 1.66" 1.66" DIA 1.66" DIA 1.66" DIA 1.66" DIA DIA 1.66" DIA2" DIA 2" DIA 2" DIA 2" DIA 2-1/2"2-1/2" DIA2-1/2" DIA2-1/2" DIA 2-1/2" DIA DIA2-1/2" DIA3" DIA 3" DIA 3" DIA 3" DIA 3-1/2"3-1/2" DIA3-1/2" DIA3-1/2" DIA 3-1/2" DIA DIA3-1/2" DIA4" DIA 4" DIA 4" DIA 4" DIA

FOR TO 5/8" FOR 1/2" TOGLASS 5/8" GLASS FOR TO 5/8" GLASS FOR 1/2" TO 5/8" GLASS FOR 1/2" FOR TO 1/2" 5/8" TO GLASS 5/8" GLASS FOR FOR TO 1/2" 5/8" TOGLASS 5/8" GLASS FOR FOR TO 1/2" 5/8" TO GLASS 5/8" GLASS FOR FOR TO 1/2" 5/8" TO GLASS 5/8" GLASS FOR FOR TO 1/2" 5/8" TO GLASS 5/8" GLASS FOR FOR TO 1/2" 5/8" TOGLASS 5/8" GLASS FOR FOR TO 1/2" 5/8" TOGLASS 5/8" GLASS FOR FOR TO 1/2" 5/8" TOGLASS 5/8" GLASS FOR 1/2" TO 5/8" FOR GLASS 1/2" TO GLASS FOR 1/2" TO FOR 5/8" FOR 1/2" GLASS TO 1/2" 5/8" TO1/2" GLASS 5/8"5/8" GLASS FOR 1/2" TO 5/8" FOR GLASS 1/2" TO GLASS 1/2" TO FOR 5/8" FOR 1/2" GLASS TO 1/2" 5/8" TO1/2" GLASS 5/8"5/8" GLASS FOR 1/2" FOR TO 1/2" FOR 5/8" TO FOR 1/2" GLASS 5/8" FOR TO 1/2" GLASS 1/2" 5/8" TOFOR TO GLASS 5/8"5/8" GLASS GLASS FOR 1/2" FORTO 1/2" FOR 5/8" TO FOR 1/2" GLASS 5/8" FOR TO 1/2" GLASS 1/2" 5/8" TO1/2" TO GLASS 5/8"5/8" GLASS GLASS FOR 1/2" FOR TO 1/2" FOR 5/8" TO FOR 1/2" GLASS 5/8" FOR TO 1/2" GLASS 1/2" 5/8" TO1/2" TO GLASS 5/8"5/8" GLASS FOR GLASS 1/2" FOR TO 1/2" FOR 5/8" TO FOR 1/2" GLASS 5/8" FOR TO 1/2" GLASS 1/2" 5/8" TO1/2" TO GLASS 5/8"5/8" FOR GLASS GLASS 1/2" FOR TO 1/2" FOR 5/8" TO FOR 1/2" GLASS 5/8" FOR TO 1/2" GLASS 1/2" 5/8" TO1/2" TO GLASS 5/8"5/8" GLASS GLASS FOR 1/2" FOR TO 1/2" FOR 5/8" TO FOR 1/2" GLASS 5/8" FOR TO 1/2" GLASS 1/2" 5/8" TO1/2" TO GLASS 5/8"5/8" GLASS GLASS FOR 1/2" FOR TO 1/2" FOR 5/8" TO FOR 1/2" GLASS 5/8" FOR TO 1/2" GLASS 1/2" 5/8" TO1/2" TO GLASS 5/8"5/8" GLASS GLASS FOR 1/2" FOR TO 1/2" FOR 5/8" TO FOR 1/2" GLASS 5/8" FOR TO 1/2" GLASS 1/2" 5/8" TO1/2" TO GLASS 5/8"5/8" GLASS GLASS STAINLESS STEELSTEEL STAINLESS STAINLESS STAINLESS STEELSTEEL

STAINLESS STEELSTEEL STAINLESS STAINLESS STAINLESS STEEL STEEL STAINLESS STAINLESS STEELSTAINLESS STEELSTAINLESS STAINLESS STAINLESS STEEL STEEL STAINLESS STAINLESS STEEL STEEL STAINLESS STAINLESS STEEL STEEL STAINLESS STAINLESS STEEL STEEL STAINLESS STAINLESS STEEL STEEL STAINLESS STEEL STAINLESS STEEL STAINLESS STAINLESS STEELSTAINLESS STEELSTEEL STAINLESS STAINLESS STAINLESS STEELSTAINLESS STEEL STAINLESS STEELSTEEL STEEL STAINLESS STEEL STAINLESS STEEL STAINLESS STAINLESS STEELSTAINLESS STEEL STEEL STAINLESS STAINLESS STAINLESS STEELSTAINLESS STEEL STAINLESS STEEL STEEL STEEL STAINLESS STAINLESS STAINLESS STEELSTAINLESS STEEL STAINLESS STEEL STEEL STEEL STAINLESS STEELSTAINLESS STEEL STAINLESS STEEL STEEL STEEL STAINLESS STAINLESS STAINLESS STEELSTAINLESS STEEL STAINLESS STEEL STEEL STEEL STAINLESS STAINLESS STAINLESS STEELSTAINLESS STEEL STAINLESS STEEL STEEL STEEL STAINLESS STAINLESS STAINLESS STEELSTAINLESS STEEL STAINLESS STEEL STEEL STEEL STAINLESS STAINLESS STAINLESS STEELSTAINLESS STEEL STAINLESS STEEL STEEL STEEL EL SSSHAPES STEEL SHAPES FOR 1/2" FOR TO1/2" 5/8"TO GLASS 5/8" GLASS

12mm

12mm

12mm

12mm

12mm

12mm

12mm 12mm 12mm 12mm 12mm 12mm

12mm

12mm 12mm 12mm 12mm 12mm12mm 12mm 12mm 12mm12mm

12mm 12mm 12mm 12mm12mm 12mm 12mm12mm 12mm 12mm 12mm 12mm

12mm 12mm 12mm 12mm12mm

12mm 12mm 12mm

12mm 12mm12mm 12mm 12mm

12mm

12mm 12mm 12mm12mm 12mm12mm 12mm 12mm12mm

12mm 12mm 12mm

12mm 12mm 12mm12mm 12mm12mm 12mm 12mm

22.2mm

38.1mm

28.6mm 41.3mm 38.1mm 28.6mm 7.9mm

28.6mm

63.5mm41.3mm 28.6mm 7.9mm

63.5mm 28.6mm 4.8mm

63.5mm 15.9 mm 28.6mm

50.8mm 15.9 mm 38.1mm 50.8mm 63.5mm 15.9 mm 38.1mm 63.5mm15.9 mm 15.9 mm 63.5mm 15.9 mm 4.8mm 63.5mm 38.1mm

15.9 63.5mm 50.8mmmm4.8mm 15.9 mm 50.8mm 15.9 mm 50.8mm 38.1mm 4.8mm 15.9 mm 50.8mm15.9 mm

50.8mm 50.8mm15.9 mm

50.8mm 15.9 mm

50.8mm15.9 mm

63.5mm

12mm

14.3mm 50.8mm

50.8mm

14.3mm 50.8mm 98.4mm

50.8mm 14.3mm 38.1mm

38.1mm 14.3mm

98.4mm

14.3mm 38.1mm

38.1mm

50.8mm

38.1mm 14.3mm 14.3mm

38.1mm 14.3mm

14.3mm 38.1mm 38.1mm 85.7mm 14.3mm

38.1mm 14.3mm

38.1mm

3.2mm 3.2mm 3.2mm 3.2mm 3.2mm 3.2mm 3.2mm 3.2mm 3.2mm

14.3mm 38.1mm 85.7mm 36.5mm

36.5mm

38.1mm 6.4mm 38.1mm 14.3mm

6.4mm 38.1mm

6.4mm 71.4mm 41.3mm 33.3mm 38.1mm 6.4mm 7.9mm

33.3mm

6.4mm 33.3mm

33.3mm 6.4mm

4.8mm23.8mm 71.4mm

6.4mm 33.3mm 6.4mm

33.3mm 6.4mm 33.3mm 23.8mm 38.1mm 6.4mm 33.3mm

6.4mm 33.3mm 58.7mm 6.4mm

33.3mm

33.3mm 6.4mm 38.1mm

11.1mm

6.4mm 33.3mm 58.7mm

33.3mm

3.2mm 3.2mm 3.2mm 3.2mm 3.2mm

12mm

88.9mm

22.2mm 22.2mm 22.2mm 22.2mm 22.2mm 22.2mm 63.5mm 63.5mm 63.5mm 63.5mm 63.5mm63.5mm 63.5mm 50.8mm 50.8mm 50.8mm 50.8mm 50.8mm 50.8mm 50.8mm50.8mm 50.8mm 38.1mm 38.1mm 38.1mm 38.1mm 50.8mm 50.8mm 50.8mm50.8mm 50.8mm 25.4mm 25.4mm 25.4mm 25.4mm 38.1mm 38.1mm 38.1mm 38.1mm 38.1mm 38.1mm 38.1mm 38.1mm 38.1mm 38.1mm 25.4mm 25.4mm 25.4mm25.4mm 25.4mm 25.4mm 25.4mm 25.4mm25.4mm 25.4mm 22.2mm

33.3mm 4.8mm

46mm 63.5mm

11.1mm

46mm

7.9mm

42.9mm 34.9mm 7.9mm 98.4mm

34.9mm

50.8mm

42.9mm

88.9mm

76.2mm

76.2mm

50.8mm

114.7mm

114.7mm

STAINLESS STAINLESS STEEL STEEL SHAPES SHAPES FOR FOR 1/2" 1/2" TO TO 5/8" 5/8" GLASS GLASS STAINLESS STAINLESS STAINLESS STAINLESS STAINLESS STEEL SHAPES STEEL STEEL SHAPES STEEL SHAPES FOR SHAPES SHAPES FOR 1/2" FOR 1/2" FOR TO FOR 1/2" TO 5/8" 1/2" 1/2" TO 5/8" GLASS TO 5/8" TO GLASS 5/8" 5/8" GLASS GLASS GLASS 63.5mm 63.5mmSTEEL 22.2mm

50.8mm

14.3mm 50.8mm

114.7mm

28.6mm

POPULAR STAINLESS STEEL PROFILES

8.9mm

12mm

GRUCR5 CAP GRUCR5 RAIL CAP RAIL GR16CAP CAP RAIL GR20CAP CAP RAIL GRUC5 RAIL GRL10CAP CAP RAIL GRLC10 CAP RAILCAP CAP RAIL GRSC15 CAP RAIL GRSC20CAP CAP RAIL GRS20 CAP RAIL CAP RAIL GRS25 CAP CAP RAIL GRUCF5 GRUCF5 RAIL CAP RAIL GRUC5 CAP GRUC5 RAIL GRUCR5 CAP RAILGRS15 GR16 GR16 RAIL CAP GR20 RAIL GR20 CAP RAIL CAP CAPGRL10 RAIL GR25 RAIL GR30 CAP RAIL GR30 RAIL GR35 CAPRAIL RAIL GR35 CAP RAIL GR40 CAP RAIL GR40 RAILGRSC20 GRUCF5 CAP RAIL GRUC5 CAPGR25 RAILGRL10 GRLC10 CAP RAIL GRLC10 CAP RAIL CAP RAIL GRSC15 GRSC15 CAP RAIL CAP RAIL GRSC20 CAP RAIL CAP RAIL GRS20 CAP RAIL GRS25 CAP RAIL CAP RAIL GRS15 GRS15 CAP CAP RAIL GRS20 CAP RAIL GRS25 CAP RAIL CAP RAILCAP RAIL RAIL 42.2mm GR40 DIA 50.8mm DIA 38.1 X 22.2mm PROFILE 33.3 X 25.4mm PROFILE 33.3 X 25.4mm PROFILE 38.1mm SQUARE PROFILE 38.1mm SQUARE PROFILE 50.8mm SQUARE PROFILE 50.8mm SQUARE PROFILE 63.5mm PROFILE 1-1/2" XRAIL 7/8" 1-1/2" PROFILE X 7/8" PROFILE GRLC10 CAP GRLC10 RAIL CAP RAIL GRLC10 GRLC10 RAIL GRLC10 CAP CAP RAIL RAIL GRL10 CAP RAIL GRL10 CAP RAIL GRS15 CAP RAIL GRS15 CAP GRSC15 RAIL GRSC15 CAP GRSC15 CAP RAIL GRSC15 GRSC15 CAP RAIL CAP RAIL CAP GRSC20 RAIL RAIL GRSC20 CAP GRSC20 CAP RAIL GRSC20 CAP RAIL CAP RAIL CAP RAIL RAIL GRS20 CAP RAIL GRS20 CAP RAIL GRS25 CAP RAIL GRS25 CAP GRL10 CAP GRL10 RAIL GRL10 CAP CAP RAIL RAIL GRS15 CAP GRS15 RAIL GRS15 CAP CAP RAIL RAIL GRS20 GRS20 RAIL GRS20 CAP CAP RAIL RAIL GRS25 CAP GRS25 RAIL CAP CAP RAIL RAIL 1-1/2" X SQUARE 7/8" 1-1/2" PROFILE XGRS25 7/8" PROFILE X CAP 7/8" 1-1/2" PROFILE X 7/8" PROFILE 1-1/2" 7/8" PROFILE 1.66" DIA 2" DIA 2" DIA 2-1/2" DIA 2-1/2" DIA 3" DIA 3" DIA 3-1/2" DIA 3-1/2" DIA 4" DIA 4"GRSC20 DIA 1-1/2" XCAP 7/8" PROFILE 1-1/2" X16mm 7/8"GLASS PROFILE 1-5/16" X 1" PROFILE 1-5/16" XX 1" PROFILE 1-5/16" X 1-1/2" 1-1/2" SQUARE SQUARE PROFILE PROFILE 2" SQUARE 2"2"1-1/2" SQUARE PROFILE PROFILE 2" SQUARE PROFILE 2-1/2" SQUARE PROFILE 1-5/16" X 1" PROFILE 1-1/2" 1-1/2" SQUARE SQUARE PROFILE PROFILE 2" SQUARE PROFILE 2-1/2" SQUARE PROFILE /2" DIA1.66" DIA 12 TO 5/8" GLASS4" DIA 12 TO 16mm GLASS 12 TO 121"TOPROFILE 16mm GLASS 12 TO 16mm GLASS 12 TO 16mm GLASS 12 TO 16mm GLASS 12 TO 16mm GLASS 12 TO 16mm GLASS 122-1/2" TO 16mm GLASS 1-5/16" X 1" PROFILE 1-5/16" X 1" PROFILE 1-5/16" X 1" 1-5/16" PROFILE 1-5/16" X 1" PROFILE X 1" PROFILE 1-5/16" X 1" PROFILE 1-5/16" X 1" PROFILE 1-1/2" SQUARE 1-1/2" PROFILE SQUARE 1-1/2" PROFILE 1-1/2" SQUARE 1-1/2" SQUARE 1-1/2" PROFILE SQUARE 1-1/2" PROFILE SQUARE SQUARE PROFILE 2" PROFILE SQUARE PROFILE 2" SQUARE 2" PROFILE SQUARE 2" PROFILE SQUARE 2" SQUARE PROFILE PROFILE PROFILE 2" SQUARE PROFILE 2" SQUARE PROFILE SQUARE 2-1/2" PROFILE SQUARE PROFILE 1-5/16" X 1" 1-5/16" PROFILE 1-5/16" X 1" PROFILE X 1" PROFILE 1-1/2" SQUARE 1-1/2" 1-1/2" PROFILE SQUARE SQUARE PROFILE PROFILE SQUARE 2" PROFILE SQUARE 2" SQUARE PROFILE PROFILE 2-1/2" SQUARE 2-1/2" 2-1/2" PROFILE SQUARE SQUARE PROFILE PROFILE FOR 1/2" TO FOR 5/8" 1/2" GLASS TO 5/8" GLASS FOR 1/2" TO FOR 5/8" 1/2" GLASS TO 5/8" GLASS FOR 1/2" TO FOR 5/8" 1/2" GLASS TO 5/8" GLASS 1/2" TO 5/8" GLASS ASS TO 5/8" GLASS FOR 1/2"1/2" TOFOR 5/8" GLASS FOR 1/2" TO FOR 5/8" 1/2" GLASS TOFOR 5/8"1/2" GLASS FOR 1/2" TOFOR 5/8"1/2" GLASS TO FOR 1/2" TOGLASS 5/8" GLASS FOR 1/2" TO 5/8" GLASS OR 1/2" TOFOR 5/8"1/2" GLASS TO FOR 1/2" TO FOR 5/8" 1/2" GLASS TO 5/8" GLASS FOR 1/2" TO 5/8" GLASS FOR5/8" 1/2"GLASS TOFOR 5/8"1/2" GLASS FOR TO 5/8" GLASS FOR 1/2" TO 5/8" GLASS FOR 1/2" TO 5/8" FOR 1/2" FOR TO 1/2" 5/8" TO GLASS 5/8" GLASS FOR TO 1/2" 5/8" TO GLASS 5/8" GLASS FOR 1/2" TO 5/8" GLASS FOR 1/2" TO 5/8" GLASS FOR 1/2" TO 5/8" GLASS FOR 1/2" FOR TO 1/2" 5/8" TO GLASS 5/8" GLASS FOR 1/2" TO 5/8" GLASS FOR 1/2" TO 5/8" GLASS FOR5/8" 1/2"GLASS TO 5/8" GLASS O 5/8" GLASS FOR 1/2" TO 5/8" FOR GLASS 1/2" 5/8" GLASS FOR 1/2" TO FOR 5/8" FOR 1/2" GLASS TO 1/2" 5/8" TO TO GLASS 5/8" GLASS FORTO 1/2" TO 5/8" FOR GLASS 1/2" 5/8" GLASS FOR 1/2" TO 5/8" FOR GLASS 1/2" FOR 5/8" 1/2" FOR GLASS TO 1/2" FOR 5/8" TO FOR 1/2" GLASS 5/8" FOR TO 1/2" GLASS 1/2" 5/8" TO TO FOR GLASS 5/8"5/8" GLASS 1/2" FOR GLASS TO 1/2" FOR 5/8" TO FOR 1/2" GLASS 5/8" FOR TO 1/2" GLASS 1/2" 5/8" TO TO GLASS 5/8" 5/8" GLASS FOR GLASS 1/2" TO 5/8" FOR GLASS 1/2" 5/8" FOR GLASS 1/2" TO 5/8" FOR GLASS 1/2" TO 5/8" GLASS FOR 1/2" FOR 5/8" FOR 1/2" GLASS TO 1/2" 5/8" TO TO GLASS 5/8" GLASS FOR 1/2" TO FOR 5/8" FOR 1/2" GLASS TO 1/2" 5/8" TO TO GLASS 5/8" GLASS FOR 1/2" TO FOR 5/8" FOR 1/2" GLASS TO 1/2" 5/8" TO TO GLASS 5/8" FOR GLASS 1/2" TO FOR 5/8" FOR 1/2" GLASS TO 1/2" 5/8" TO GLASS 5/8" GLASS STAINLESS STEEL STAINLESS STEEL STAINLESS STEEL STAINLESS STEEL STAINLESS STEEL STAINLESS STEEL STAINLESS STEEL STAINLESS STEEL STAINLESS STEEL STAINLESS STEEL STAINLESS STEEL STAINLESS STEEL STAINLESS STEEL STAINLESS STEEL STAINLESS STEEL STAINLESS STEEL STAINLESS STEEL STAINLESS STEEL STAINLESS STEEL STAINLESS STEEL STAINLESS STAINLESS STEEL STEEL STAINLESS STEEL STAINLESS STEELSTEEL STAINLESS STEEL STAINLESS STAINLESS STEEL STAINLESS STEEL STAINLESS STEEL STAINLESS STAINLESS STEELSTAINLESS STEEL STAINLESS STEEL STAINLESS STAINLESS STEEL STEEL STAINLESS STEEL STAINLESS STEEL ESS STEEL STAINLESS STAINLESS STEEL STAINLESS STEEL STAINLESS STEEL STEEL STEEL STAINLESS STEEL STAINLESS STEEL STAINLESS STEEL STAINLESS STEEL STAINLESS STAINLESS STEELSTAINLESS STEEL STEEL STAINLESS STAINLESS STEELSTAINLESS STEEL STEEL STAINLESS STEEL STAINLESS STEEL STAINLESS STAINLESS STEELSTAINLESS STEEL STEEL STAINLESS STEEL STAINLESS STEEL STAINLESS STEEL STAINLESS STEEL STAINLESS STAINLESS STAINLESS STEELSTAINLESS STEEL STAINLESS STEEL STEEL STEEL STAINLESS STAINLESS STEELSTAINLESS STEEL STEEL STAINLESS STAINLESS STEEL STAINLESS STEEL STEEL

more information call FREE SS L SHAPES STEELFor SHAPES FOR 1/2" FOR TO 1/2" 5/8"TO GLASS 5/8" GLASS 63.5mm 25.4mm

25.4mm

38.1mm

38.1mm

38.1mm

on 00 800 0421 6144 (UK & Europe) | Fax FREE on 00 800 0262 3299 50.8mm

50.8mm

50.8mm SHAPES SHAPES FOR FOR 3/4"3/4" GLASS GLASS

38.1mm

50.8mm

63.5mm

63.5mm

Email: [email protected] | www.taper-loc.co.uk

Call FREE on 00 800 0421 6144 Fax FREE on 00 800 0262 3299

View Our Full Range of Architectural Railing Systems...

Manchester Charles Babbage Avenue Kingsway Business Park, Rochdale, OL16 4NW, England Tel: +44 (0) 1706 863 600 Fax: +44 (0) 1706 869 860 www.crlaurence.co.uk

Our EUHR11 Architectural Balustrade and Railing Systems Catalogue

Stuttgart Boschstrasse 7 D-74360 Ilsfeld Germany Tel: +49 (0) 7062 915 93 15 Fax: +49 (0) 7062 915 93 16 www.crlaurence.de Copenhagen Stamholmen 70 Unit B, DK-2650 Hvidovre Denmark Tel: +45 36 72 09 00 Fax: +45 36 70 33 35 www.crlaurence.dk France Boschstrasse 7 D-74360 Ilsfeld Germany Tel: +49 (0) 7062 915 93 15 Fax: +49 (0) 7062 915 93 16 www.crlaurence.fr

• Glass Railings/Balustrades • TAPER-LOC® Railing System • Swinging Gate Systems • Post Railing Systems • Welded Railing Systems • Hand Railing Systems • Aluminium Railing Systems • Glass Walls/Windscreens • Tools/Accessories

You may also be interested in... EUAH11 Architectural Hardware ‘All Glass’ Entrance Systems Catalogue • Architectural Metals • Door and Sidelite Rails • Door Closers • Centre Locks • Glass Clamps • Headers and Channels • Ladder Pulls • Locking Hardware • Door Closers and Hinges • Patch Hardware • Pivot Door Systems • Push/Pull Handles • Sliding and Stacking Glass Door Systems • Spider Fittings • Standoff Systems

catalogues are available to download or view online at crlaurence.co.uk or crlaurence.de