RECA Diaflex Diamond Blades Features of RECA Diaflex Diamond Blades  Better Hold – The segments of the disc are through laser-welded onto the disc core. This

guarantees the very best segment hold across the full segment width. This excellent segment hold also applies when reverse cutting and on discs which have been worn.  Higher Precision Cut – The RECA Diaflex blade is manufactured from three layered metal sheets, ‘sandwiched’ together, instead of just the one plate. This ensures a smooth running blade, producing a higher precision cut.  RS10 Quality – R = Reliability, S = Strength and 10 = Hardest grade of diamond. The principle is: When in doubt, choose a diamond blade for hard material with a softer bond, these discs simply cut better! The right blade for each application!

RECA Diaflex Diamond Blades - Abrasive Material RECA Diaflex RS10A  The RS10A is our premium disc for asphalt and has an extremely hard bond, segment height 7mm.  The risk of severe under cutting is greatly suppressed by the use of drop segments (300mm and

above) thus disrupting the abrasive spoil at the base of the cut.  Dia. 400mm upwards are supplied with special protective segments to combat reverse cutting.  The RS10A can be used with asphalt, stone, sandstone, fine clay, lightweight aerated concrete

blocks and all abrasive materials.

04 01 - VY 12/15 Reproduction, even in part, prohibited. Printed in UK.

Art. No. 0664 113 115 0664 113 125 0664 113 150 0664 113 230 0664 113 230F 0664 213 355 0664 413 450

Dia. (mm) Bore in mm (inches) 115 22.2 (7/8) 125 22.2 (7/8) 150 22.2 (7/8) 230 22.2 (7/8) 230 M14 flange for flat cutting 350 25.4 (1) 450 25.4 (1)

RECA Diaflex RS10AT  The RS10AT is our premium disc for asphalt and has an

extremely hard bond, segment height 10mm.  The risk of severe under cutting is greatly suppressed by the use

of TCT INSERTS thus disrupting the abrasive spoil at the base.  For use on asphalt, stone, sandstone, fine clay and all abrasive materials. Art. No. 0664 300 300

04 01

Dia. (mm) 300

Bore in mm (inches) 20 (3/4)

04 01

RECA Diaflex Diamond Blades - Abrasive Material RECA Diaflex RS10AE  Professional quality blade ideal for use in asphalt.  Hard bond, segment height 10mm.  Risk of severe undercutting is greatly reduced by the use of 3

drop segments, helping to prevent the blade from wearing thin and/or segment loss.  For use on asphalt, stone, breeze or soft block and all abrasive materials. Art. No. 0664 310 300 0664 310 355

Dia. (mm) 300 355

Bore in mm (inches) 20 (3/4) 25.4 (1)

RECA Diaflex RS10ABE     

General purpose professional blade for medium abrasive materials. Hard bond, segment height 10mm. Double laser welded segments for added safety. Conforms to EN13236 / OSA Safety Standards. For use on most hard to medium house bricks, concrete slabs, medium limestone, hard sandstone and concrete with medium to soft aggregates. Dia. (mm) 300

Bore mm 20(3/4)

04 02 - VY 12/15 Reproduction, even in part, prohibited. Printed in UK.

Art. No. 0664 114 300E

04 02

04 02

RECA Diaflex Diamond Blades - Medium Abrasive RECA Diaflex XL10  The XL10 can be used on most medium abrasive materials.  Hard bond, segment height 10mm.  Ideal for concrete repair specialists or any other trades where

the majority of cutting is performed in medium strength concrete (including reinforced).  For use on most medium abrasive materials including cured aggregate concrete, reinforced concrete, bricks, paving bricks and lightweight blocks. Art. No. Dia. (mm) Bore mm (inches) 0664 216 230 230 22.2 (7/8) 0664 216 300 300 20 (3/4) 0664 216 355 350 25.4 (1) 0664 216 400 400 25.4 (1) 0664 216 450 450 25.4 (1) 0664 216 600 600 25.4 (1)

RECA Diaflex Diamond Blades - Medium Hard Materials RECA Diaflex RS10B  The RS10B is a particularly long lasting blade when used

continually on hard materials such as concrete, reinforced concrete, general building material, cast iron pipe and bricks.  Medium / hard bond, segment height 9+1mm.

04 03 - VY 12/15 Reproduction, even in part, prohibited. Printed in UK.

Art. No. 0661 112 115 0661 112 125 0661 112 180 0661 112 230 0661 202 300 0661 202 302 0661 202 305

Dia. (mm) 115 125 180 230 300 300 300

Bore (mm) 22.2 22.2 22.2 22.2 20 22.2 25.4

Dia. Bore (mm) (mm) 0661 202 350 350 20 0661 202 355 350 25.4 Art. No.

RECA Diaflex MASTERDRIVE    

The is a premium quality blade. Medium/Hard bond, segment height 9+1mm. Very long service life. For use on most medium/hard materials including reinforced concrete, brick, natural and artificial stone, granite and ceramics.

Art. No. Dia. (mm) 0664 020 350 350 0664 020 450 450

04 03

Bore mm 25.4 25.4

04 03

RECA Diaflex Diamond Blades - Hard Materials RECA Diaflex RS10F  The specialist disc for tiles.  Very soft bond, segment height 8mm, with continuous rim.  For use on tiles, thin granite, marble slabs, glass and ceramics.

Art. No.

Dia. (mm)

0664 110 115 0664 110 125 0664 110 180* 0664 110 250* 0664 110 300* 0664 110 360* 0664 110 355*

115 125 180 250 300 300 350

Bore in mm (inches) 22.2 (7/8) 22.2 (7/8) 30/25.4 (1) 30/25.4 (1) 30/25.4 (1) 60 30/25.4 (1)

*For diameters of 180mm upwards. The RS10F should be used in conjunction with table saws rather than angle grinders in wet and dry cutting. The bore size is 30mm but each disc is supplied with a reducing ring as standard, which reduces the bore size to 25.4 mm.

RECA Diaflex Speedi  The Speedi is an ultra fast cutting diamond blade especially designed for cutting hard materials.  Only 2mm wide on a 230mm blade, allows for quick and

clean cutting of hard material.  An extremely versatile blade for many trades such as stone masons, general builders and construction companies.  For use on concrete, reinforced concrete, granite, marble, ceramic tiles and hard stone. Art. No. Dia. (mm) Bore in mm 0664 001 115 115 22.2 0664 001 125 125 22.2 0664 001 230 230 22.2

04 04 - VY 12/15 Reproduction, even in part, prohibited. Printed in UK.

RECA Diaflex Ultra H  Very clean cut for the hardest of materials, with continuous rim.  Soft bond.  For use on granite, marble, ceramic, concrete, clay and cast iron pipes, concrete plaster, hard brick,

very hard concrete (also reinforced) and exposed aggregate concrete. Art. No. Dia. (mm) 0664 111 115 115 0664 111 125 125 0664 111 150 150 0664 111 230 230 0664 211 300 300 0664 211 302 300 0664 211 350 350 0664 211 355 350

04 04

Bore in mm 22.2 22.2 22.2 22.2 20 22.2 20 25.4

Segment Height 12mm 12mm 12mm 12mm 10mm 10mm 10mm 10mm

04 04

RECA Diaflex Diamond Blades - Hard Materials RECA Diaflex TS10  A specialist diamond blade for cutting hard materials.  This diamond blade has turbo segments along with core

protection. This will give it a faster, cleaner cut and an easier cut in hard material.  Segment height 10mm.  For use on granite, natural and artificial stone, aggregate concrete, roof tiles, terrazzo, quartzite and red brick. Art. No. 0664 010 115 0664 010 125 0664 010 125F 0664 010 150 0664 010 230 0664 010 230F

Dia. (mm) Bore in mm (inches) 115 22.2 (7/8) 125 22.2 (7/8) 125 M14 flange for flat cutting 150 22.2 (7/8) 230 22.2 (7/8) 230 M14 flange for flat cutting

RECA Diaflex AX12  A specialist diamond blade for cutting hard materials.  This diamond blade has a unique matrix segment

providing increased performance when cutting.  Segment height 12mm.  For use on reinforced concrete, aggregated concrete, red

brick, clinker, granite and building materials. Art. No. 0664 030 115 0664 030 125 0664 030 230

Dia. (mm) Bore in mm (inches) 115 22.2 (7/8) 125 22.2 (7/8) 230 22.2 (7/8)

RECA Diaflex RS10 Master Drive Universal 04 05 - VY 12/15 Reproduction, even in part, prohibited. Printed in UK.

A specialist diamond blade for hard materials.  A segmented blade, meaning this will be more aggressive    

when cutting. When used, the blade becomes nearly transparent allowing the user control of the opposite cutting edge. Also, due to the number of holes in the discs there is significantly reduced noise. Segment height 12mm. For use on granite, concrete (also reinforced), aggregated concrete, roof tiles and general building material. Art. No. 0664 015 115 0664 015 125 0664 015 150 0664 015 230

04 05

Ø mm 115 125 150 230

Bore mm 22.2 22.2 22.2 22.2

04 05

RECA Diaflex Diamond Blades - Hard Materials RECA Diaflex RS10 Duo A new specialist and unique diamond blade for cutting and grinding material.  A blade for two applications, it can be used to cut material

   

and can also be used to grind off the surface material, and grind edges of the material. Diamond coated front face 25mm, rear face 7.5mm. M14 flange. One size only 125mm. For use on concrete, granite, natural and artificial stone, and general building material.

Art. No. 0662 422 125

RECA Diaflex Rondo  A specialist diamond blade for cutting

CURVES in hard materials.  Simply tilt the blade to cut a curve.  For use on granite, natural stone and concrete. Depth of cut: 125mm: 30mm 180mm: 50mm Art. No.

Bore in mm (inches) 22.2 (7/8) 22.2 (7/8)

04 06 - VY 12/15 Reproduction, even in part, prohibited. Printed in UK.

0662 412 125 0662 412 180

Dia. (mm) 125 180

04 06

04 06

RECA Diaflex Diamond Blades - Specialist RECA Diaflex RS10 AC  The RS10 AC is a combination blade for asphalt and

abrasive concrete.  Extremely hard bond, segment height 10mm.  To help prevent undercutting and the core wearing thin, the blade benefits from 3 drop segments.  Ideal for highways contractors, local authorities, utilities contractors, civil engineers, driveway contractors and cable laying divisions. Art. No. 0663 001 230 0663 001 230F 0663 001 300 0663 001 350 0663 001 360

Dia. (mm) 230 230 300 350 350

Bore in mm (inches) 22.2 (7/8) M14 flange for flat cutting 20 (3/4) 25 (1) 20 (3/4)

RECA A60/C40 Combination Blade  The RS10 A60/C40 is a combination blade for asphalt and

abrasive concrete.  Segment height 10.5mm with 10mm of usable segment to give a long working life.  The bond is a hard asphalt bond with adjustments to make it suitable to cut a variety of materials.  The blade has tungsten carbide insert protection tips, this helps in preventing the blade segment wearing thin and/or segment loss.  Size: 300/20mm Art No. 0663 006 300

RECA Diaflex FE

04 07 - VY 12/15 Reproduction, even in part, prohibited. Printed in UK.

 The FE blade is a universal diamond blade for cutting    

steel or concrete. A long life blade for all tasks. Extremely long cutting life of up to 200 standard metal cutting discs. Unique bond is self cooling, no loss in overall diameter, maximum cutting depth is achieved. Especially designed for cutting steel work (max 12mm), cast iron pipe, reinforced concrete, natural stone and aggregate concrete. Art. No. 0664 009 230 0664 009 300 0664 009 302 0664 009 350 0664 009 355 0664 009 400

04 07

Dia. (mm) 230 300 300 350 350 400

Bore in mm (inches) 22.2 (7/8) 20 (3/4) 22.2 (7/8) 20 (3/4) 25.4 (1) 20 (3/4)

Not suitable for stainless steel. Always start cutting at the narrowest point in the metal. May need re-sharpening on abrasive material periodically.

04 07

RECA Diaflex Diamond Blades - Specialist RECA Diaflex RS10M  The RS10M blade is designed for the removal of mortar

between brickwork.  Designed with incredibly hard segments, straight through laser welding and tungsten wear retarding strips, this blade will last and last in the tough job of mortar raking.  The clearing of mortar from between bricks creates a hostile environment for a diamond blade. Sand and cement mix is very abrasive and would destroy a normal disc in a very short time.  The wide design helps to channel the mortar dust away from the blade and cuts down on the number of passes required. Art. No. 0664 065 115 0664 065 125

Dia. (mm) 115 125

Width (mm) 6.0 6.0

Bore mm (inches) 22.2 (7/8) 22.2 (7/8)

RECA Diaflex Diamond Blades - Accessories RECA Sharpening Stone A manmade block purposely designed for sharpening diamond blades. The ultra abrasive block is used to create a new sharp edge. The particles abrade the alloy matrix to reveal fresh, sharp diamonds. The sharpening stone eliminates the need to find blocks of sand stone, or other similar abrasive materials, that can be bulky or difficult to obtain.

04 08 - VY 12/15 Reproduction, even in part, prohibited. Printed in UK.

Art. No. 0664 001 001

Description Sharpening Stone

Box Qty 1

NO-KEY Quick Clamping Flange Nut NO-KEY is a simple solution for fast mounting and removal of blades used with conventional angle grinders up to a diameter of 230mm without any tools. Tighten by hand.

SUPER SIMPLE - SUPER FAST - SUPER SAFE Art. No. 1603 340 000

04 08

04 08

Profix Turbo  The Profix Turbo diamond blade is suitable for cutting concrete,

    

reinforced concrete, medium aggregate concrete, bricks, block paving bricks and lightweight blocks. 10mm continuous rim. Advanced sinter technology & durable hardened steel plate. Complies to stringent German UVV VBG49 safety standard. Each blade comes in standard Profix packaging with a distinctive lacquered silver finish. Laser engraving on every blade gives article number, safety standard and material application to help alleviate incorrect use. Art. No. 0663 930 300

Dia. (mm) 300

Bore in mm (inches) 20 (3/4)

Concrete ‘S’ Blades  The S10 Concrete blades are suitable for cutting concrete,

    

reinforced concrete, medium aggregate concrete, bricks, block paving bricks and lightweight blocks. Short, narrow spaced segments for clean cutting. Advanced sinter technology & durable hardened steel plate. Complies to stringent German UVV VBG49 safety standard. Each blade comes with a distinctive lacquered silver finish. Laser engraving on every blade gives article number, safety standard and material application to help alleviate incorrect use.

04 09 - VY 10/16 Reproduction, even in part, prohibited. Printed in UK.

Art. No. 0663 402 115 0663 402 230 0663 402 300

Description S10 Concrete S10 Concrete S10 Concrete

Dia. (mm) 115 230 300

Bore in mm 22.2 22.2 20

 The S15 Concrete blades are suitable for cutting light, reinforced

   

concrete, medium aggregate concrete, bricks and lightweight blocks. Powerful turbo segments for better cutting performance. Advanced sinter technology & durable hardened steel plate. Complies to stringent German UVV VBG49 safety standard. Laser engraving on every blade gives article number, safety standard and material application to help alleviate incorrect use.

Art. No. 0663 415 300

04 09

Description S15 Concrete

Dia. (mm) 300

Bore in mm 20

04 09

RECA Diamond Drill Set Comprehensive set for drilling granite slabs, hard artificial stone, floor and ceramic tiles. Ideal for use by bathroom and kitchen fitters or installers in commercial premises. Hex shank fits into standard drill chuck.  Set comes complete in a foam inlayed RECA VISO case.  Includes drill holder to hold drills in place and to prevent slippage.  Demo CD included explaining how to use the product.

Set contents – 5, 6, 8, 10, 12 & 14mm drills, drill holder, water container, demo CD, drill holder with sponge, replacement sponge, mini 250mm magnetic level. Art. No. 0663 800 6

RECA Diadrill Ideal for drilling holes into harder materials like granite, marble, ceramic tiles and can also be used on porcelain tiles. Suitable for kitchen fitters, plumbers, property and facilities management and monumental stone masons. The main feature for this product verses any other similar product is that you use this on an Angle Grinder, the drill has an M14 fl ange. At full speed a grinder will be drilling at 11000rpm.

04 10 - VY 12/15 Reproduction, even in part, prohibited. Printed in UK.

There is no need for water cooling, however when drilling through thicker material, for example 30mm, factor in a cooling break. This is ideal when drilling a hole in a typical tile 8 to 10mm thick. An excellent product to drill a quick clean hole in hard material. There is no messy slurry to clear up after use. Overall length 70mm. Size range 20 to 50mm Diameter. (60mm and above POA)

Art. No.

Dia. (mm)

0663 700 020 0663 700 025 0663 700 030 0663 700 035 0663 700 040 0663 700 050

20 25 30 35 40 50

04 10

Overall Length mm 70 70 70 70 70 70

M14 Flange - fixes directly into an Angle Grinder

04 10

RECA Wet Diamond Cores A premium quality range of cores for drilling into reinforced concrete. Other sizes available. POA.  1/2 fitting - 12 -35mm  1 1/4 fitting -42 -200mm

Applications – reinforced concrete, masonry, natural and artificial stone. NB. Can only be used on machine for wet drilling.

Art. No.

Overall Length No of Segment mm 12 300 Ring 14 300 Ring 18 300 Ring 22 300 Ring 42 420 5 56 420 5 72 420 7 82 420 7 102 420 9 122 420 10 Adaptor for DD100 1/2 female

Dia. (mm)

04 11 - VY 12/15 Reproduction, even in part, prohibited. Printed in UK.

0663 300 012 0663 300 014 0663 300 018 0663 300 022 0663 420 042 0663 420 056 0663 420 072 0663 420 082 0663 420 102 RECA Diadrill 0663 420 122 0663 920 008

04 11

04 11

RECA Diamop Indispensable when working with concrete and various masonry surfaces. The RECA Diamop offers fast and clean grinding on concrete when using angle grinders with dust extraction. Applications:  Removal of screeds, skins and coverings including graffiti, colours, dyes, tar or bitumen-paints from

masonry surfaces.  Levelling and preparing under surfaces for industrial floors.  Grind all concrete ‘noses’ and shuttering mould impressions.  Surfaces can be polished to a smooth finish. Features  For dry grinding of concrete, screed, terrazzo, marble, granite, lime plaster, sandstone, etc.  Ideal for removing uneven surfaces on exposed aggregate concrete.  Indispensable tool for building contractors and allied trades, especially in concrete renovation or

04 12 - VY 12/15 Reproduction, even in part, prohibited. Printed in UK.

paint and covering removal.

Art. No.

Type

0664 622 100 0664 622 125

Double Double

Dia. (mm) 100 125

0664 622 180

Double

180

Art. No.

Type

Dia. (mm)

0662 602 125

Aero

125

0662 602 180

Aero

180

Bore Size Application (mm) 22.2 Universal for concrete. Max 22.2 cutting edge 22.2 life.

Bore Size Application (mm) Universal for 22.2 concrete. Max cutting edge 22.2 life.

M14 flange on disc internal thread screws straight on to grinder.

04 12

04 12

Diamond Tools The Husqvarna K760 weighs 9.6 kilos. Anti-vibration handles & less noise ensures comfortable use at all times. Integrated water feed hoses can be utilised to suppress dust. Long service intervals reduce costs. 300mm blade capacity. Art. No. 2409 07 506 350mm blade capacity Art. No. 2409 07 507 The Stihl TS410 cut off saw is 9.4 kilos in weight and approximately 5cm shorter in length than the TS400 model. Features comprise of an anti-vibration system that will ensure comfortable use at all times. Incorporating a long life filter system with cyclone pre filtration which increases filter life. The two stroke engine exceeds emission standards. 300mm blade capacity. Art. No. 2409 041 06

Diamond Saw Accessories Two Stroke Oil

04 13 - VY 12/15 Reproduction, even in part, prohibited. Printed in UK.

A new formulation with a higher content of selected synthetic components for reduced exhaust smoke and odour, as well as excellent lubrication. Lower ash content ensures reduced engine deposits. Box Qty 50

04 13

Size 0.1 Ltr

Art. No. 2409 900 001

04 13