89
PRODUCTS & SERVICES CATALOGUE
9 TH EDITION
VIETNAM
SINGAPORE
Townsville
midway metals LOCATIONS
AUSTRALIA
Brisbane Newcastle
Perth
Sydney Albury Melbourne
NEW ZEALAND
AUSTRALIA’S LARGEST INDEPENDENT STAINLESS STOCKISTS
HEAD OFFICE & COIL CENTRE Street: 56 Business Street YATALA QLD 4207 Postal: PO Box 621 BEENLEIGH QLD 4207 AUSTRALIA
P (07) 3382 9500 | F (07) 3807 8150 E
[email protected]
ALBURY
SYDNEY
Prospero Court ALBURY NSW 2640 P (02) 6041 4000 | F (02) 6041 4422 E
[email protected]
24-28 Lockwood Road Erskine Park NSW 2759 P (02) 9670 8900 | F (02) 9834 2441 E
[email protected]
BRISBANE
TOWNSVILLE
Corner Rom & Binary Streets YATALA QLD 4207 P (07) 3287 2811 | F (07) 3807 2687 E
[email protected]
331-335 Woolcock Street GARBUTT QLD 4814 P (07) 4728 8777 | F (07) 4728 8778 E
[email protected]
MELBOURNE
AUCKLAND
33 Tatterson Road DANDENONG VIC 3175 P (03) 9791 5111 | F (03) 9791 5333 E
[email protected]
P +64 9 424 4194 | F +64 9 424 4194 E
[email protected]
NEWCASTLE
P +84 3 5184 8468 | F +84 3 5184 8456 E
[email protected]
12 Sandringham Avenue THORTON NSW 2322 P (02) 4966 3800 | F (02) 4966 3811 E
[email protected]
VIETNAM
www.midwaymetals.com.au
PERTH 471 Victoria Road MALAGA WA 6090 P (08) 9248 6944 | F (08) 9248 6955 E
[email protected]
DISCLAIMER
COPYRIGHT
The technical information contained in this publication should not be relied on for specific applications without first securing competent advice. Whilst all care is taken to ensure that the information contained herein is accurate and up-to-date, Midway Metals Pty Ltd does not warrant its accuracy or completeness and does not accept liability for errors or omissions.
All rights reserved. No part of this publication may be reproduced or distributed in any form or by any means, or stored in a database or retrieval system, without prior written permission of Midway Metals.
Midway Metals | The Stainless Steel Innovators | 9 th Edition | www.midwaymetals.com.au
TABLE OF CONTENTS
1
INTRODUCTION COMPANY PROFILE SERVICES
3 3
BLANKING LINE BLANKING LINE
4-5
PRODUCT SECTION
COIL SHEET PLATE FLOOR PLATE / COIL PLASMA / PROCESSING FACILITIES
6 7-8 9-10 11 12-13
BAR PRODUCTS ROUND BAR ROUND BAR TECHNICAL DATA FLAT BAR ANGLE BAR HEXAGON BAR HOLLOW BAR SQUARE BAR FLAT, SQUARE, HEXAGON & ANGLE BAR TECHNICAL DATA CHANNEL CHANNEL TECHNICAL DATA
14-15 16 17-18 19 20 21-22 23 24 25 26
PIPE PRODUCTS SEAMLESS & WELDED PIPE PIPE TECHNICAL DATA BUTTWELD PIPE FITTINGS BUTTWELD PIPE FITTINGS TECHNICAL DATA 150LB BSP THREADED FITTINGS 150LB BSP THREADED FITTINGS TECHNICAL DATA 3000LB NPT THREADED FITTINGS 3000LB SOCKETWELD FITTINGS 3000LB NPT THREADED FITTINGS TECHNICAL DATA 3000LB SOCKETWELD FITTINGS TECHNICAL DATA FORGED FLANGES FORGED FLANGES TECHNICAL DATA PLATE FLANGES PLATE FLANGES TECHNICAL DATA
LEGEND
★ STANDARD STOCK LINE
27-28 29-30 31-32 33-34 35 36-37 38 38 39-40 41 42 43 44 45-46
✩ AVAILABLE ON REQUEST
Midway Metals | The Stainless Steel Innovators | 9 th Edition | www.midwaymetals.com.au
TABLE OF CONTENTS
FLAT PRODUCTS
2
TABLE OF CONTENTS
TABLE OF CONTENTS
TUBE PRODUCTS WELDED ROUND TUBE ARCHITECTURAL TUBE WELDED SQUARE & RECTANGULAR TUBE TUBE FITTINGS TUBE FITTINGS TECHNICAL DATA HYGIENIC FITTINGS BSM/RJT FITTINGS HYGIENIC FLAT FACE FITTINGS TUBE CLAMPS TRICLOVER FITTINGS HYGIENIC FITTINGS TECHNICAL DATA TRICLOVER FITTINGS TECHNICAL DATA VALVES & EQUIPMENT PLATE FLANGES PLATE FLANGES TECHNICAL DATA SEAMLESS TUBE SEAMLESS/WELDED TUBE TECHNICAL DATA COMPRESSION FITTINGS AUXILIARY TUBE FITTINGS ADJUSTABLE FEET & INSERTS CONCEALED FLANGES TUBE SADDLES FACE RINGS ANGLE RINGS SOLID PUSH IN CAPS EXPANSION FLANGES A-JUSTA-FOOTTM
47 48 49 50-51 52-53 54 54 54 54 54 55-56 57 58 59 60 61 62 63 64 64 64 64 64 64 64 65 66-68
VALVES 1 PIECE 800 WOG BALL VALVE - THREADED 2 PIECE 1000 WOG BALL VALVE - THREADED 3 PIECE 1000 WOG BALL VALVE - THREADED 3 WAY REDUCED PORT 1000 WOG BALL VALVE - THREADED ‘L’ PORT 3 WAY REDUCED PORT 1000 WOG BALL VALVE - THREADED ‘T’ PORT 200 WOG SWING CHECK VALVE 300 WOG Y STRAINER 1000 WOG SPRING CHECK VALVE
69 70 71 72 73 74 74 75
TECHNICAL DATA PRESSURE CONVERSIONS USEFUL CONVERSION FACTORS STAINLESS STEEL GRADES CORROSION CHART GLOSSARY
LEGEND
76 77 78-80 81-83 84-87
★ STANDARD STOCK LINE
✩ AVAILABLE ON REQUEST
Midway Metals | The Stainless Steel Innovators | 9 th Edition | www.midwaymetals.com.au
INTRODUCTION
3
COMPANY PROFILE Midway Metals is a wholly owned Australian company, and is Australia’s largest independent Stainless Steel Stockist. We offer a complete range of stainless steel.
At Midway Metals our strengths lie in our personnel and our service. These two key areas of our business promote our mission statement:
We pride ourselves on being at the forefront of innovation in both product lines and services, and we will constantly upgrade our products and services to meet market expectations and demands.
“SERVICE EXCELLENCE THROUGH UNDERSTANDING THE NEEDS OF OUR INDUSTRY”.
Midway Metals operates from seven locations in Australia with branches also in New Zealand and Vietnam.
Through our worldwide network of mills and suppliers we strive to offer a quality product at a competitive price whether it be from stock, ex-mill delivery or an indent programmed delivery.
INTRODUCTION
Our main focus is ensuring complete customer satisfaction via procuring, stocking and identifying all forms of stainless steels and providing an unequalled level of after sales service.
SERVICE •
24 hour breakdown service / 24 hour paging system.
•
Material identification transfer. Workplace health and safety accreditation for material identification / heat number transfer.
•
Technical and advisory service.
•
Contract supply, ensuring delivery of material on time every time.
•
Project management assistance/indent facilities.
•
Cut to size.
THE STAINLESS STEEL INNOVATORS Leading the industry in both quality and innovation of product lines and services, is our main priority. We are constantly updating what we offer to ensure that we stay ahead of our competitors. We go the extra mile to meet our customers needs. Midway’s focus is ensuring complete customer satisfaction via procuring, stocking and identifying all forms of stainless steel and providing an unequalled level of after sale service and support.
NOT JUST PRODUCTS At Midway, we don’t just sell stainless steel. We have a whole range of services that set us apart from our competitors and further reinforces our position as the industry leaders in all things stainless steel. We are passionate about meeting your needs and will continue to deliver on our promise to lead the industry in quality, service and innovation.
Midway Metals | The Stainless Steel Innovators | 9 th Edition | www.midwaymetals.com.au
4
BLANKING LINE
ABSOLUTELY LASER FLAT At Midway Metals, we pride ourselves on quality and innovation. We’re constantly upgrading our products and services to meet and exceed market expectations. We are proud to announce that we have made the largest investment in the stainless steel industry in Australia since the mid 1990’s. Laser cutters and fabricators demand flat material and Midway Metals can deliver. We have recently purchased and installed a state of the art precision blanking line from Red Bud in the US, with an in-line stretcher leveller, that produces superior flatness unsurpassed in our industry.
bottom and edge to edge, releasing all internal stresses and producing a perfectly flat product. Stretcher levelling is superior to other techniques currently used in Australia. It’s the only process guaranteed to flatten the material, without reducing the thickness (a common problem with temper passing). And, while temper passing and roller levelling can reduce the internal stresses in the material, they will not reset it. Only stretcher levelling can reset a material’s memory. With our new precision blanking line, we can provide dead flat sheets and plates, cut to length up to 12 metres.
BLANKING LINE
By stretching the material beyond its yield point, our stretcher leveller resets the material’s memory from the milling process. The material is stretched from top to
When precision cutting, quality fabricating and 100% perfection in flatness count, Midway Metals’ stretcher leveller is the only process in Australia that can deliver.
Midway Metals | The Stainless Steel Innovators | 9 th Edition | www.midwaymetals.com.au
BLANKING LINE
5
KEY FEATURES & BENEFITS The ability to produce perfectly flat material is not the only benefit of Midway Metals stretcher leveller technology. See below the various features and benefits that set stretcher levelling apart from other inferior alternatives.
BENEFITS FOR LASER CUTTERS •
Midway’s Laser Flat material
•
Material doesn’t warp when laser cut with high heat Improved material quality allows for consistent cutting
•
Material stays flat after laser cutting
•
Material stays flat after folding and punching
•
•
Need for rework from warping is eliminated
Likelihood of damage to laser heads decreased when cutting
•
No tensile springback. Fold / bend material just once to achieve desired angle
•
Ability to retain accuracy when cutting long, flat lengths
•
Save time from unnecessary rework
•
•
Process will not change mechanical properties
Decreased cutting time with no changes in material during the cutting process
BLANKING LINE
•
BENEFITS FOR FABRICATORS
Midway Metals | The Stainless Steel Innovators | 9 th Edition | www.midwaymetals.com.au
6
COIL SPECIFICATIONS:
ASTM A240/480
FINISH:
2B, BA, 2BPE, N4 PE, CPP, NO1
SIZE
304/L 2B
0.55mm
915 1219
0.7mm
915 1219
0.9mm
915 1219
FLAT PRODUCTS
1.2mm
915 1219 1500
1.5mm
915 1219
★ ★ ✩ ★ ✩ ★ ✩ ★ ★ ✩ ★
BA
2B PE
N4 PE
316/L CPP/ N1
2B
2B PE
N4 PE
★
★
✩
★
★
★
✩
★
★ ✩ ★ ★ ✩ ★
★
★
★ ✩
✩
★ ★
★
✩
★
★
★
★
★
★
✩
★
✩
CPP/ N1
2mm
1500 2000 1219 1500
2000 1219 2000
★
✩
✩
★
1219 1500 2000 1219
★ ✩ ★ ★
✩
★
✩
★ ★
★ ★ ★ ★
✩ ✩
★ ★ ★
★
2000
★ ★ ★ ★
✩
★
★
✩
★
✩
✩
★
★ ★
✩
★
★ ★
✩
✩
✩ ✩ ✩
✩ ✩ ✩
✩ ✩
✩ ✩
★
✩ ✩
✩ ✩
★
✩ ✩
✩ ✩
★
★ ★ ★ ✩ ★
✩ ✩
✩ ✩ ✩ ★
★ ★ ★ ★
★ ★
2000 1219 1500 2000
★
★ ★
★
✩ ✩
★ ★ ★
★ ★ ★
★ ★
★ ★ ★
★ ★
✩ ✩
★ ★ ★ ★ ★ ★ ★ ★
★ ★
★ ★
★ ★ ★ ★ ★ ★ ★ ★
✩ ✩
★
★
★ ★ ★
1219 1500
10mm
✩
✩ ✩
1250 1500 8mm
✩
★ ★ ★
1250
6mm
✩
No.1
★
1500 1500
5mm
2B
★
★
1250 1500
4mm
No.1
2205
★ ✩
★
2B
2101
915 1219
3.5mm
2B
321
915 1219
3mm
1.4003
253MA
✩ ★
1250
2.5mm
409L
★ ✩
1250 1500
3CR12
★ ★ ★ ★ ★ ★
★
Midway Metals | The Stainless Steel Innovators | 9 th Edition | www.midwaymetals.com.au
SHEET
7
SPECIFICATIONS:
ASTM A240/480
FINISH:
2B, 2BPE, N4 PE, BAPE
SIZE
304 2B
0.55mm
0.7 mm
0.9mm
N4 PE
N8 PE
2B
2B PE
N4 PE
3CR12
321
2B
1.4003 2B
2B
915 x 1819 1219 x 2438
✩
✩
915 x 1819
✩
✩
✩
915 x 2438
✩
✩
✩
1219 x 2438
★
✩
★
915 x 1819
✩
✩
✩
915 x 2438
✩
✩
✩
1219 x 2438
★
915 x 1819
✩
✩
✩
915 x 2438
★
✩
✩
1219 x 2438
★
★
★
★
★
★
★
★
★
★
★
★
1219 x 3048
★
1mm
1219 x 2438
1.2mm
915 x 1819
✩
✩
✩
915 x 2438
★
✩
✩
1219 x 2438
★
★
★
1219 x 3048
✩
★
★
1500 x 3000
★
★
★
915 x 1819
★
✩
✩
915 x 2438
✩
✩
✩
1219 x 1800
✩
★
✩
1219 x 2438
★
★
★
1219 x 3048
★
★
★
1.5mm
BA PE
253MA
★
★
✩
★
★
★
★
✩ ★
★
★
★
★
★
★
★
★
1250 x 2400
★
1250 x 2500 1500 x 3000 1500 x 4000
FLAT PRODUCTS
0.45mm
2B PE
316
★
★
★
★
★
★
★
★
Midway Metals | The Stainless Steel Innovators | 9 th Edition | www.midwaymetals.com.au
8
SHEET SPECIFICATIONS:
ASTM A240/480
FINISH:
2B, 2BPE, N4 PE, BAPE
SIZE
2mm
304
316
2B
2B PE
N4 PE
2B
2B PE
N4 PE
915 x 1819
✩
✩
✩
BA PE
✩
✩
✩
915 x 2438
✩
✩
✩
✩
✩
✩
★
1219 x 1800
253MA
3CR12
321
2B
1.4003 2B
2B
★
1219 x 2438
★
★
★
1219 x 3048
★
★
★
★
★
★
★
★ ★
FLAT PRODUCTS
1250 x 2400
★
1250 x 2500 1500 x 3000
★
1500 x 4000 2.5mm
★
★
✩
915 x 1819
✩
✩
✩
915 x 2438
✩
✩
✩
1219 x 2438
★
★
★
1219 x 3000
★
★
✩
1500 x 3000
★
★
✩
★
✩
1500 x 4000 3mm
★
★
★
★
★
★
✩
★
915 x 1819
✩
✩
✩
✩
✩
915 x 2438
✩
✩
✩
✩
✩
★
1219 x 1800
★
★
1219 x 2438
★
★
★
★
★
★
1219 x 3048
★
★
✩
★
★
★
★
★
1250 x 2500
★
1250 x 3000 1500 x 3000 1500 x 4000
★
★
★
★
★
✩
★
★
★
Midway Metals | The Stainless Steel Innovators | 9 th Edition | www.midwaymetals.com.au
★
PLATE
9 ASTM A240/480
FINISH:
2B, 2BPE, CPP, No. 1 HRAP
SIZE
3mm
4mm
5mm
TP304/L
1500 x 3000
2B
2B PE
★
★
CPP
TP316L No.1
2B
2B PE
★
★
CPP
TP321 No.1
1219 x 6000
★
1500 x 6000
★
★
★
★
2000 x 6000
★
★
★
★
1219 x 2438
★
★
1500 x 3000
★
★
1500 x 6000
★
✩
★
2000 x 6000
★
✩
★
1219 x 2438
★
★
★
★
★
★ ★
★
★ ★
★
★
★
★
1500 x 6000
★
★
★
2000 x 6000
★
★
★
★
★
★
★
★
★
★
★
★ ★
★
★
★
★
★
★
★
★
★
★
★ ★
★ ★
1250 x 2400 1500 x 3000
★
★
★
1500 x 6000
★
★
★
2000 x 6000
★
★
★
★
★
★
★
★
★
★
★
★
2500 x 6000
★ ✩
2500 x 7500
10mm
★
★
2500 x 6000
8mm
2205
★
1500 x 3000
1219 x 2438
253MA
1.4003
★
1250 x 2500
6mm
3CR12
1219 x 2438
★
★
1500 x 3000
★
★
1500 x 6000
★
★
2000 x 6000
★
★
★
2500 x 6000
★
★
2500 x 7500
★
✩
★
★
★
★
✩
1219 x 2438
★
★
1500 x 3000
★
★
★
1500 x 6000
★
★
★
★
2000 x 6000
★
★
★
★
2500 x 6000
★
★
2500 x 7500
★
★
✩
Midway Metals | The Stainless Steel Innovators | 9 th Edition | www.midwaymetals.com.au
FLAT PRODUCTS
SPECIFICATIONS:
10
PLATE SPECIFICATIONS:
ASTM A240/480
FINISH:
CPP, No. 1 HRAP
SIZE
TP 304/L
TP 316L
TP 321
3CR12
253MA
2205
1219 x 2438
★
★
3000 x 1500
★
★
★
1500 x 6000
★
★
★
★
2000 x 6000
★
★
★
★
★
★
2500 x 6000
★
★
2500 x 7000
★
★
2500 x 7500
★
★
1219 x 2438
★
★
1500 x 3000
★
★
1500 x 6000
★
★
2000 x 6000
★
★
★
★
2500 x 6000
★
★
1500 x 3000
★
★
1500 x 6000
★
★
2000 x 6000
★
★
★
★
★
2500 x 6000
★
★
1500 x 6000
★
★
★
2000 x 6000
★
★
★
★
★
★
2500 x 6000
★
★
1500 x 6000
★
★
2000 x 6000
★
★
2500 x 6000
★
★
1500 x 6000
★
★
2000 x 6000
★
★
1.4003
FLAT PRODUCTS
12mm
16mm
20mm
25mm
32mm
40mm
★ ★
★
★ ★
★
★
★
★
★
★
★
★
★
2500 x 6000 1500 x 6000
★
★
2000 x 6000
★
★
65mm
2000 x 4000
★
★
80mm
2000 x 4000
★
★
50mm
✩
Midway Metals | The Stainless Steel Innovators | 9 th Edition | www.midwaymetals.com.au
FLOOR PLATE / COIL
11
SPECIFICATIONS:
ASTM A240/480
FINISH:
PRESSED FLOOR PLATE, HRAP CHEQUER PLATE
SIZE
TP 304
TP 316
1219 x 2438
★
✩
3mm
1219 x 2438
★
✩
1219 x 3048
✩
✩
1219 x 2438
★
✩
1500 x 3000
★
✩
6mm
1219 x 2438
✩
✩
3.17mm
1219 x 2438
★
✩
4.5mm
1219 x 2438
★
✩
1500 x 3000
★
✩
1219 x 2438
★
✩
1219 x 6000
★
✩
1500 x 3000
★
✩
4.5mm
HRAP CHEQUER PLATE
6mm
HRAP CHEQUER PLATE COIL 3.5mm
1220
★
✩
4.5mm
1220
★
✩
1524
★
✩
Midway Metals | The Stainless Steel Innovators | 9 th Edition | www.midwaymetals.com.au
FLAT PRODUCTS
PRESSED FLOOR PLATE 2mm
12
PLASMA PLATE PROCESSING FACILITIES Midway Metals has state of the art Plasma Cutting facilities, capable of cutting Stainless Steel from 2mm to 80mm in thickness. All machines are linked to the latest Fastcam Computer Software, with full Nesting facilities including standard developments of cones, square to rounds, branches and Lobster Back bends.
FLAT PRODUCTS
The advantages of using Midway Metals processing include: •
Australia’s largest capacity for plasma cut plate processing with facilities in Brisbane, Sydney, Melbourne and Perth.
•
Versatility of cutting widths and lengths. We can handle large dimensional plates ensuring large profiles are supplied in one piece.
•
DXF files can be supplied by Computer Disc or by our email facility. DXF files can be emailed, saving time and ensuring quicker response to shut down/ breakdown situations.
•
Send all DXF files to
[email protected]
•
Tolerances and finishes have been improved due to advancements in technology. Increased cutting capacity and metre rates has lead to more efficient costings for the client.
•
We stock a wide variety of plate sizes and grades: • • • • • • •
304/304L 316/316L 321 2101 2205 253MA 3CR12 (1.4003)
LOBSTER
RECTIRCLE
P BRANCH
CONE
Midway Metals | The Stainless Steel Innovators | 9 th Edition | www.midwaymetals.com.au
PLASMA
13
STANDARD PLASMA TOLERANCES AS3902/ISO9002 Minimum Hole Size A) Cut quality suitable. To machine to finished size. Not suitable for cut sizes. THICKNESS
MIN. HOLE SIZE
THICKNESS
MIN. HOLE SIZE
40mm 40mm < 100mm
200mm DIA
Minimum Width
25mm or 2 x thickness whichever is greater
Minimum Length
2 x thickness or 100mm which ever is greater
PLASMA CUTTING SHEETS & PLATES Standard tolerances Acc. ASTM A480. Note the Flatness levels quoted by this standard refer to the feed material and not to the product of the plasma cutting operation.
Plasma Cutting – Standard Production Tolerances – Cut Size
THICKNESS
50mm
OUTSIDE DIMENSION
INSIDE DIMENSION
1500mm
1500mm
-1
-1
-5
-6
+5
+9
+1
+1
-1
-1
-6
-8
+6
+8
+1
+1
Midway Metals | The Stainless Steel Innovators | 9 th Edition | www.midwaymetals.com.au
FLAT PRODUCTS
B) Standard Cut Quality.
14
ROUND BAR - IMPROVED MACHINING SPECIFICATIONS:
ASTM A276 / A484
LENGTHS:
4 METRE FIXED & RANDOMS
FINISH:
COLD DRAWN & POLISHED PEELED & REELED CENTRELESS/PRECISION GROUND
TOLERANCE:
H8 / H9 / H10 / H11 / K12
SIZE
303
304
316
431
2205
253MA
APPROX. WEIGHT
3.18
★
★
0.062
3.96
★
★
0.1
4.76
★
★
0.14
5
★
★
0.155
BAR PRODUCTS
mm
kg/metre
6
✩
★
★
6.35
✩
★
★
0.25
7.94
★
★
0.39
8
★
★
★
★
✩
10
★
★
✩
11.11
★
★
★
★
12.7
★
★
0.99
14.28
★
★
1.26
15.88
★
★
16
★
★
17.46
✩
✩
9.53
12
✩
✩
★
★
0.23
0.4 0.56
★
0.62 0.76
✩
★
✩
0.89
1.552
★
1.58 1.88
19.05
★
★
★
★
20
✩
★
★
✩
22.23
★
★
★
3.042
★
★
3.551
24
★
2.235
★
25
✩
★
★
✩
25.4
★
★
★
★
★
★
5.03
★
★
5.55
31.75
★
★
33
✩
✩
6.72
34.93
★
★
7.512
35
★
✩
36
✩
★
28.58 30
★
★
★
2.47
★
3.853 3.973
★
6.21
★
Midway Metals | The Stainless Steel Innovators | 9 th Edition | www.midwaymetals.com.au
7.553 8
ROUND BAR - IMPROVED MACHINING SPECIFICATIONS:
ASTM A276 / A484
LENGTHS:
4 METRE FIXED & RANDOMS
FINISH:
COLD DRAWN & POLISHED PEELED & REELED CENTRELESS/PRECISION GROUND
TOLERANCE:
H8 / H9 / H10 / H11 / K12
303
304
316
431
2205
38.1
★
★
★
★
40
★
★
41.28
✩
★
44.45
★
★
50
★
★
50.8
★
★
53.97
✩
✩
57.15
★
★
60
★
★
63.5
★
★
69.85
★
★
253MA
mm
kg/metre 8.94
★
★
★
12.17
★ ★
★
15.413 15.9 17.95
★
20.12 22.2
✩
★
24.84 30.05
★
30.2 35.76
★
80
9.87 10.5
★
70 76.2
APPROX. WEIGHT
39.46
82.55
★
★
41.98
88.9
★
★
48.68
★
90 95.25 101.6
★
108
★
✩
55.88
★
63.59 73.2
★
110 114.3
★
120 127
★
152.4
★
74.6
★
81.9
★
89.2
★
✩
★
139.7
49.9
★
100.9 122.5
★
144.9
165.1
★
169.9
177.8
★
196.9
★
256.8
228.6
✩
324.7
254
★
403
304.8
★
575.9
203.2
✩
Midway Metals | The Stainless Steel Innovators | 9 th Edition | www.midwaymetals.com.au
BAR PRODUCTS
SIZE
15
16
TECHNICAL DATA Stainless steel bar is usually supplied to comply with ASTM A276 (or ASTM A582 for free-machining grades). Both specification refer to ASTM A484M for dimensional tolerances, except as noted below for round bar. Available tolerances will vary dependent upon bar section size, condition and finish.
ROUND BAR Cold-finished round bar is usually supplied to ASTM A276/A484 OR A582/A484M
FINISH
DIAMETER TOLERANCE
DRAWN
H9
PEELED & REELED
H9 / H10
SMOOTH TURNED
H11 / K12
GROUND
H8 OR H9
TOLERANCE NUMBER
BAR PRODUCTS
NOMINAL BAR SIZE (mm)
6
7
8
9
10
11
12
13
14
0 to 3
6
10
14
25
40
60
100
140
250
3 to 6
8
12
18
30
48
75
120
180
300
6 to 10
9
15
22
36
58
90
150
220
360
10 to 18
11
18
27
43
70
110
180
270
430
18 to 30
13
21
33
52
84
130
210
330
520
30 to 50
16
25
39
62
100
160
250
390
620
50 to 80
19
30
46
74
120
190
300
460
740
80 to 120
22
35
54
87
140
220
350
540
870
120 to 180
25
40
63
100
160
250
400
630
1000
180 to 250
29
46
72
115
185
290
460
720
1150
250 to 315
32
52
81
130
210
320
520
810
1300
315 to 400
36
57
89
140
230
360
570
890
1400
400 to 500
40
63
97
155
250
400
630
970
1550
Tolerance values given in microns = 0.001mm H =
all minus
J
=
equal
K
=
all plus
Midway Metals | The Stainless Steel Innovators | 9 th Edition | www.midwaymetals.com.au
FLAT BAR
17 ASTM A276/A484M
LENGTHS:
4 METRE FIXED & RANDOMS
FINISH:
SLIT ROLLED EDGE (SRE) HOT ROLLED ANNEALED & PICKLED (HRAP)
SIZE
304
316
APPROX. WEIGHT
mm
SRE
HRAP
SRE
HRAP
kg/metre
3 x 12
★
✩
★
✩
0.317
3 x 20
★
✩
★
✩
0.48
3 x 25
★
★
★
★
0.63
3 x 30
★
★
★
★
0.79
3 x 40
★
★
★
★
0.948
3 x 50
★
★
★
★
1.3
3 x 75
★
✩
★
✩
1.98
3 x 100
★
5 x 20
★
✩
★
✩
0.79
5 x 25
★
★
★
★
0.987
5 x 30
★
★
★
★
1.19
5 x 40
★
★
★
★
1.58
5 x 50
★
★
★
★
1.97
5 x 65
★
★
★
★
2.56
5 x 75
★
✩
★
✩
2.96
5 x 100
★
✩
2.50
★ ★
3.95 ★
0.648
6 x 20
★
★
★
★
0.97
6 x 25
★
★
★
★
1.3
6 x 30
★
★
★
★
1.62
6 x 40
★
★
★
★
1.93
6 x 50
★
★
★
★
2.59
6 x 65
★
★
★
★
3.25
6 x 75
★
★
★
★
3.89
6 x 12
6 x 90
✩
6 x 100
★
★
★ ★
★
5.18
6 x 150
★
✩
★
✩
7.38
8 x 25
★
1.63
8 x 30
★
1.97
8 x 40
★
8 x 50
★
★
★
✩
3.28
8 x 65
★
★
★
✩
4.26
8 x 75
★
★
★
✩
4.92
8 x 100
★
★
★
✩
6.56
4.52
2.63
Midway Metals | The Stainless Steel Innovators | 9 th Edition | www.midwaymetals.com.au
BAR PRODUCTS
SPECIFICATIONS:
18
FLAT BAR SPECIFICATIONS:
ASTM A276/A484M
LENGTHS:
4 METRE FIXED & RANDOMS
FINISH:
SLIT ROLLED EDGE (SRE) HOT ROLLED ANNEALED & PICKLED (HRAP)
304
SIZE
BAR PRODUCTS
mm
SRE
316 HRAP
SRE
APPROX. WEIGHT HRAP
kg/metre
10 x 20
★
★
1.58
10 x 25
★
★
1.97
10 x 30
★
★
★
★
2.43
10 x 40
✩
★
✩
★
3.16
10 x 50
✩
★
✩
★
3.96
10 x 65
✩
★
✩
★
5.13
10 x 75
★
★
✩
★
5.93
10 x 100
✩
★
✩
★
7.9
10 x 125
✩
✩
✩
✩
10.16
10 x 150
✩
★
✩
★
11.83
★
2.59
★
12 x 25 12 x 30
✩
✩
✩
✩
3.25
12 x 40
✩
★
✩
★
3.89
12 x 50
✩
★
✩
★
5.18
12 x 65
✩
★
✩
★
6.48
12 x 75
✩
★
✩
★
7.77
12 x 100
✩
★
✩
★
10.36
12 x 150
★
★
15.50
16 x 40
★
✩
5.05
16 x 50
★
★
6.48
16 x 65
★
✩
8.21
16 x 75
★
★
9.35
16 x 100
★
✩
13.10
20 x 40
★
✩
6.56
20 x 50
★
★
7.9
20 x 75
★
★
11.9
20 x 100
★
★
15.8
25 x 50
★
★
10.36
25 x 75
★
✩
15.48
25 x 100
★
✩
20.69
Midway Metals | The Stainless Steel Innovators | 9 th Edition | www.midwaymetals.com.au
ANGLE BAR
19
SPECIFICATIONS:
ASTM A276/A484M
LENGTHS:
6 METRE FIXED & RANDOMS
FINISH:
HOT ROLLED ANNEALED & PICKLED
304
SIZE
316
kg/metre
3 X 20 X 20
★
★
0.9
3 X 25 X 25
★
★
1.21
3 X 30 X 30
★
★
1.53
3 X 40 X 40
★
★
1.86
3 X 50 X 50
★
★
2.5
4 X 30 X 30
★
✩
1.95
4 X 40 X 40
★
✩
2.6
5 X 25 X 25
★
★
1.77
5 X 30 X 30
★
★
2.25
5 X 40 X 40
★
★
2.98
5 X 50 X 50
★
★
3.79
6 X 25 X 25
★
★
2.26
6 X 30 X 30
★
★
2.92
6 X 40 X 40
★
★
3.56
6 X 50 X 50
★
★
4.95
6 X 65 X 65
★
★
6.16
6 X 75 X 75
★
★
7.46
6 X 100 X 100
★
★
10.05
10 X 50 X 50
★
★
7.06
10 X 65 X 65
★
★
9.48
10 X 75 X 75
★
★
11.1
10 X 100 X 100
★
★
15
10 X 127 X 127
✩
✩
20.1
10 X 150 X 150
✩
✩
23.7
12 x 100 x 100
✩
✩
19.6
Midway Metals | The Stainless Steel Innovators | 9 th Edition | www.midwaymetals.com.au
BAR PRODUCTS
mm
APPROX. WEIGHT
20
HEXAGON BAR SPECIFICATIONS:
ASTM A276/A582/A484M
LENGTHS:
RANDOMS
FINISH:
COLD DRAWN (CD) HOT ROLLED (HR) & ANNEALED (HRAP)
304
316
6.35
✩
✩
0.28
7.92
✩
✩
0.44
8
✩
✩
0.45
9.53
✩
✩
0.65
11.3
✩
★
0.91
13.34
✩
★
1.25
15.24
✩
★
1.63
17
✩
✩
2.02
18.03
✩
★
2.27
19.05
✩
★
2.53
20
★
✩
3
20.83
✩
★
3.02
22.23
✩
★
3.36
23.37
✩
★
3.79
25.65
✩
★
4.56
28.58
✩
★
5.65
30.48
✩
★
6.42
31.75
✩
✩
6.86
33.05
✩
✩
7.54
37.59
✩
✩
9.86
42.42
✩
✩
12.5
47.63
✩
✩
15.73
50.8
✩
✩
17.87
✩
✩
22.57
✩
✩
27.83
SIZE
303
AVG. WEIGHT
BAR PRODUCTS
mm
57.15 63.5
kg/metre
★
Midway Metals | The Stainless Steel Innovators | 9 th Edition | www.midwaymetals.com.au
HOLLOW BAR
21
316 (FREE MACHINING)
SPECIFICATIONS:
ASTM A511
LENGTHS:
2 TO 6 METRES
TOLERANCE:
OUTSIDE DIAMETER +2 / -0% INSIDE DIAMETER +0 / -2%
SIZE O.D.
DIMENSIONS AFTER ROUGH MACHINING I.D.
mm
mm
32
20 16 25 20 16 28 25 20 32 28 20 36 32 25 40 36 28 50 40 36 32 56 45 40 36 40 63 50 45 40 45 71 63 56 50 50 80 71 63 56 80 71 63 56
36
40
45
50
56
63
71
75 80
85 90
95 100
106
CHUCKED TRUE TO O.D.
CHUCKED TRUE TO I.D.
MAX O.D. mm 31 31 35 35 35 39 39 39 44 44 44 49 49 49 55 55 55 62 62 62 62 69.5 69.5 69.5 69.5 73.5 78.5 78.5 78.5 78.5 83.5 88.5 88.5 88.5 88.5 93.5 98.5 98.5 98.5 98.5 104 104 104 104
MAX O.D. mm 30 30 34 34 33.5 38 38 37.5 43 42.5 42.5 48 47.5 47.5 54 53.5 53.5 61 60.5 60.5 60.5 69 68.5 68.5 68.5 72 77.5 77 77 77 82 87.5 87 87 87 91 97 97 96.5 96.5 103 102.5 102.5 102.5
MIN I.D. mm 22 18 27 22 18.5 30 27 22.5 34 305 22.5 38 34.5 27.5 42 38.5 30.5 52 42.5 38.5 34.5 58 47.5 42.5 38.5 42.5 65.5 52.5 47.5 43 48 73.5 65.5 58.5 53 52 82.5 73.5 65.5 59 82.5 74 66 59
MIN I.D. mm 21 17 26 21 17 29 26 21 33 29 21 37 33 26 41 37 29 51 41 37 33 57 46 41 37 41 64 51 46 41 46 72.5 64 57 51 51 81.5 72.5 64 57 81.5 72.5 64 57
AVERAGE WEIGHT
316
kg/metre 4.23 5.11 4.58 5.96 6.84 5.53 6.51 7.89 6.75 8.23 10.6 8.08 9.75 12.2 10.3 12.1 15.3 10 15.6 17.5 19.1 13 19.8 22.4 24.3 26.2 16.5 25.5 28.5 31.1 33.7 20.8 27.4 32.5 36.4 42.3 24.6 32.9 39.5 44.6 32.5 40.8 47.4 52.5
★ ★ ✩ ✩ ✩ ★ ★ ★ ✩ ★ ★ ✩ ★ ★ ★ ★ ★ ★ ★ ✩ ★ ★ ★ ★ ★ ★ ★ ★ ✩ ★ ★ ★ ★ ✩ ★ ✩ ✩ ★ ✩ ★ ✩ ★ ★ ★
Midway Metals | The Stainless Steel Innovators | 9 th Edition | www.midwaymetals.com.au
BAR PRODUCTS
GRADE:
22
HOLLOW BAR GRADE:
316 (FREE MACHINING)
SPECIFICATIONS:
ASTM A511
LENGTHS:
2 TO 6 METRES
TOLERANCE:
OUTSIDE DIAMETER +2 / -0% INSIDE DIAMETER +0 / -2%
SIZE O.D.
I.D.
mm
mm
112
90 80 71 63 90 80 71 63 100 90 80 71 106 90 80 71 112 100 90 80 125 106 95 80 132 122 112 140 130 118 150 140 125 160 150 132 160 150 140 170 130 180 140 190 150 200
118
BAR PRODUCTS
DIMENSIONS AFTER ROUGH MACHINING
125
132
140
150
160
170
180
190
200
212 224 236 250
CHUCKED TRUE TO O.D.
CHUCKED TRUE TO I.D.
MAX O.D. mm 110 110 110 110 116 116 116 116 123 123 123 123 130 130 130 130 137.5 137.5 137.5 137.5 147.5 147.5 147.5 147.5 157.5 157.5 157.5 167 167 167 177 177 177 187 187 187 197 197 197 208.5 208.5 220.5 220.5 232 232 246
MAX O.D. mm 109 108.5 108.5 108 114.5 114.5 114 114 121.5 121.5 121 121 128.5 128 128 127.5 136.5 136 136 135.5 146 146 145.5 145 156 156 155.5 166 165.5 165.5 175.5 175.5 175 185.5 185.5 185 195 195 194.5 207 206 218.5 217.5 230.5 229.5 244
MIN I.D. mm 93 83 74 66 93 83 74 66 103 93 83 74.5 109 93.5 83.5 74.5 115 103.5 93.5 83.5 128.5 109.5 98.5 84 135.5 125.5 115.5 143.5 134 122 154 144 129 164 154 136.5 164 154.5 144.5 174.5 135 184.5 145 195 155.5 205
MIN I.D. mm 91.5 81.5 72.5 64 91.5 81.5 72.5 64 101.5 91.5 81.5 72.5 108 91.5 81.5 72.5 114 101.5 91.5 81.5 127 108 96.5 81.5 134 124 114 142.5 132 120 152.5 142.5 127 162.5 152.5 134 162.5 152.5 142.5 173 132 183 142.5 193 152.5 203
AVERAGE WEIGHT
316
kg/metre
Midway Metals | The Stainless Steel Innovators | 9 th Edition | www.midwaymetals.com.au
30.4 40.8 49.2 55.8 39.2 49.7 57.9 64.6 38.4 50.1 60.5 68.9 42.3 61.6 72 80.3 48.2 63.8 75.4 85.9 47.8 74.7 88.3 104.4 56.6 72.1 86.5 64.3 81 99.1 68.9 86.6 111 73.5 92.4 123.6 98.4 117.3 135.2 109.7 183.3 121.6 200.2 134.2 217.6 153.7
✩ ★ ★ ★ ✩ ★ ✩ ★ ★ ★ ★ ★ ★ ✩ ★ ★ ★ ★ ✩ ★ ✩ ★ ✩ ★ ★ ✩ ★ ★ ★ ✩ ✩ ✩ ★ ★ ✩ ✩ ✩ ✩ ★ ★ ✩ ✩ ✩ ★ ★ ★
SQUARE BAR
23
SPECIFICATIONS:
ASTM A276/A582/A484M
LENGTHS:
RANDOMS
FINISH:
COLD DRAWN (CD), HOT ROLLED ANNEALED & PICKLED (HRAP)
304
316
mm
AVG. WEIGHT kg/metre
4
✩
✩
0.13
6
✩
★
0.33
6.35
✩
★
0.34
8
✩
★
0.53
9.52
✩
★
0.75
10
✩
★
0.8
12
✩
★
1.27
12.7
✩
★
1.32
15.88
✩
✩
2.03
16
✩
★
2.05
19.05
✩
✩
2.98
20
✩
★
3.21
25
✩
★
5.18
25.4
✩
✩
5.29
32
✩
★
8.21
38.1
✩
✩
11.9
40
✩
★
12.83
45
✩
✩
16.24
50
✩
★
20.05
50.8
✩
✩
21.2
Midway Metals | The Stainless Steel Innovators | 9 th Edition | www.midwaymetals.com.au
BAR PRODUCTS
SIZE
24
TECHNICAL DATA Stainless steel bar is usually supplied to comply with ASTM A276 (or ASTM A582 for free-machining grades). Both specification refer to ASTM A484M for dimensional tolerances. Available tolerances will vary dependent upon bar section size, condition and finish.
FLAT BAR Hot-finished (HRAP to ASTM A276 / A484M) These tolerances are for hot finished flat bars, rolled as bars, in HRAP condition. Note that different tolerances apply for flat bar cut from coil, sheet or plate.
BAR PRODUCTS
WIDTH
THICKNESS TOLERANCE FOR THICKNESS mm
WIDTH TOLERANCE
mm
3.2 to 13
13 to 25
25 to 50
mm (SRE)
UP to 25
+/- 0.20
+/- 0.25
–
+/- 0.40
25 to 50
+/- 0.30
+/- 0.40
+/- 0.80
+/- 0.80
50 to 100
+/- 0.40
+/- 0.50
+/- 0.80
+ 1.6 to - 0.80
100 to 150
+/- 0.40
+/- 0.50
+/- 0.80
+ 2.40 to -1.60
SQUARE & HEXAGONAL BAR Cold-finished to ASTM A276 / A582 / A484M) SPECIFIED SIZE mm
SIZE TOLERANCE mm
3.00 to 8.00
+Nil, - 0.05
8.00 to 13.00
+Nil, - 0.08
13.00 to 25.00
+Nil, - 0.10
25.00 to 50.00
+Nil, - 0.15
50.00 to 75.00
+Nil, - 0.20
over 75.00
+Nil, - 0.25
ANGLE BAR Hot-finished to ASTM A276 / A484M) LENGTH OF LEG
LEG TOLERANCE
up to 150mm
+/- 3.0mm
over 150mm
+/- 5.0 - 3.0mm
Midway Metals | The Stainless Steel Innovators | 9 th Edition | www.midwaymetals.com.au
CHANNEL
25
SPECIFICATIONS:
ASTM A276/A484M
LENGTHS:
6 METRES FIXED
FINISH:
HOT ROLLED, ANNEALED & PICKLED (HRAP)
GRADE:
304 / 316
SIZE mm
304
316
3 x 40 x 20
✩
✩
3 x 50 x 25
✩
✩
4 x 60 x 30
✩
✩
4 x 35 x 70
✩
✩
4 x 80 x 40
✩
✩
4 x 90 x 45
✩
✩
4 x 100 x 50
✩
✩
5 x 60 x 30
✩
✩
5 x 70 x 35
✩
✩
5 x 80 x 40
✩
★
5 x 90 x 45
✩
✩
5 x 100 x 50
✩
✩
5 x 120 x 60
✩
✩
5 x 130 x 65
✩
✩
6 x 60 x 30
✩
✩
6 x 70 x 35
✩
✩
6 x 80 x 40
✩
✩
6 x 90 x 45
✩
✩
6 x 100 x 50
★
★
6 x 120 x 60
✩
✩
6 x 130 x 65
✩
✩
6 x 140 x 70
✩
✩
6 x 150 x 75
★
★
6 x 160 x 80
✩
✩
6 x 180 x 90
✩
✩
6 x 200 x 100
✩
✩
Midway Metals | The Stainless Steel Innovators | 9 th Edition | www.midwaymetals.com.au
BAR PRODUCTS
TxHxB
26
TECHNICAL DATA CHANNELTOLERANCES UNIT WEIGHT KG/MTR
BAR PRODUCTS
SIZE mm
THICKNESS T mm
HxB
3
40 x 20
1.79
4
5
6
7
8
9
10
50 x 25
2.27
60 x 30
3.56
4.37
5.12
70 x 35
4.21
5.17
6.08
80 x 40
4.48
5.96
7.03
90 x 45
5.55
6.83
8.05
100 x 50
6.18
7.62
8.98
10.3
11.7
13.0
14.2
120 x 60
9.20
10.9
12.6
14.2
130 x 65
10.1
11.9
13.8
15.5
17.3
19.1
140 x 70
12.9
14.9
16.8
19.8
20.7
150 x 75
13.8
16.0
18.1
20.2
22.2
160 x 80
14.8
17.1
19.3
21.6
23.8
180 x 90
16.7
19.4
22.0
24.5
27.0
200 x 100
18.6
21.6
24.5
27.4
30.2
SIZE TOLERANCES SIZE mm
THICKNESS T mm
H
Tolerance
B
Tolerance
3
40
±1.5
20
±1.5
±0.4
4
5
6
7
8
9
10
50
±1.5
25
±1.5
±0.4
60
±2.0
30
±1.5
±0.4
±0.4
±0.4
70
±2.0
35
±1.5
±0.4
±0.4
±0.4
80
±2.0
40
±1.5
±0.4
±0.6
±0.4
90
±2.0
45
±1.5
±0.4
±0.4
±0.4
100
±2.0
50
±2.0
±0.6
±0.6
±0.6
±0.4
±0.4
±0.4
±0.6
120
±3.0
60
±3.0
±0.4
±0.4
±0.4
±0.4
130
±3.0
65
±3.0
±0.4
±0.6
±0.4
±0.4
±0.4
±0.6
140
±3.0
70
±3.0
±0.6
±0.6
±0.6
±0.6
±0.6
150
±3.0
75
±3.0
*±0.6
±0.6
±0.6
*±0.6
±0.6
160
±3.0
80
±3.0
±0.6
±0.6
±0.6
±0.6
±0.6
180
±3.0
90
±3.0
±0.6
±0.6
±0.6
±0.6
±0.6
200
±4.0
100
±3.0
±0.6
±0.6
±0.6
±0.6
±0.6
Midway Metals | The Stainless Steel Innovators | 9 th Edition | www.midwaymetals.com.au
SEAMLESS & WELDED PIPE SPECIFICATIONS:
ASTM A312M-08
LENGTHS:
6.1 METRE/RANDOMS
FINISH:
WELDED SEAMLESS
NB PIPE SIZE
27
ANNEALED & PICKLED COLD FINISH/HOT FINISH
SIZE
WELDED
Inch
mm
O.D.
WT
1/8 1/4 3/8 1/2 3/4 1 1 1/4 1 1/2 2 2 1/2 3 3 1/2 4 5 6 8 10 12 14 16 18 20 24
6 8 10 15 20 25 32 40 50 65 75 90 100 125 150 200 250 300 350 400 450 500 600
10.287 13.716 17.145 21.336 26.67 33.401 42.164 48.26 60.325 73.025 88.9 101.6 114.3 141.3 168.275 219.075 273.05 323.85 355.6 406.4 457.2 508 609.6
1.244 1.651 1.651 2.108 2.108 2.768 2.768 2.768 2.768 3.048 3.048 3.048 3.048 3.403 3.403 3.759 4.191 4.572 4.78 4.78 4.78 5.53 6.35
304/L
316/L
SEAMLESS 2205
304/L
316/L
✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩
✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩
✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩
✩ ✩ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ✩ ★ ★
APPROX. WGT
2205
kg/metre
★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ✩
★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★
✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩
✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩
0.2772 0.4905 0.6301 0.9984 1.275 2.089 2.687 3.102 3.925 5.254 6.45 7.399 8.352 11.56 13.82 19.93 27.82 35.95 42.1 48.2 54.3 69.8 96.2
SCHEDULE 40s / STD WALL 1/8 1/4 3/8 1/2 3/4 1 1 1/4 1 1/2 2 2 1/2 3 3 1/2 4 5 6 8 10 12 14 16 18 20 24
6 8 10 15 20 25 32 40 50 65 80 90 100 125 150 200 250 300 350 400 450 500 600
10.287 13.716 17.145 21.336 26.67 33.401 42.164 48.26 60.325 73.025 88.9 101.6 114.3 141.3 168.275 219.075 273.05 323.85 355.6 406.4 457.2 508 609.6
1.727 2.235 2.311 2.768 2.87 3.378 3.556 3.683 3.911 5.156 5.486 5.74 6.019 6.553 7.112 8.178 9.271 9.53 9.53 9.53 9.53 9.53 9.53
★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ✩ ✩ ✩ ✩ ✩
★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ✩ ★ ✩
✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩
✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩
0.3641 0.6321 0.8445 1.266 1.682 2.498 3.382 4.044 5.435 8.619 11.27 13.55 16.05 21.75 28.22 42.48 60.23 73.88 81.2 93.2 105.1 117.0 140.8
Midway Metals | The Stainless Steel Innovators | 9 th Edition | www.midwaymetals.com.au
PIPE PRODUCTS
SCHEDULE 10 / 10s
28
SEAMLESS & WELDED PIPE SPECIFICATIONS:
ASTM A312M-08
LENGTHS:
6.1 METRE/RANDOMS
FINISH:
WELDED SEAMLESS
NB PIPE SIZE
ANNEALED & PICKLED COLD FINISH/HOT FINISH
SIZE
WELDED
Inch
mm
O.D.
WT
1/8 1/4 3/8 1/2 3/4 1 1 1/4 1 1/2 2 2 1/2 3 3 1/2 4 5 6 8 10 12 14 16 18 20 24
6 8 10 15 20 25 32 40 50 65 75 90 100 125 150 200 250 300 350 400 450 500 600
10.287 13.716 17.145 21.336 26.67 33.401 42.164 48.26 60.325 73.025 88.9 101.6 114.3 141.3 168.275 219.075 273.05 326.85 355.6 406.4 457.2 508 609.6
2.413 3.023 3.2 3.734 3.911 4.546 4.851 5.08 5.537 7.01 7.62 8.077 8.559 9.525 10.97 12.7 12.7 12.7 12.7 12.7 12.7 12.7 12.7
304/L
316/L
SEAMLESS 2205
304/L
316/L
APPROX. WGT 2205
kg/metre
PIPE PRODUCTS
SCHEDULE 80s / XS
✩ ✩ ✩ ✩ ✩ ★ ✩ ✩ ✩ ✩ ✩ ✩ ✩
★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★
✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩
0.4679 0.7962 1.099 1.618 2.193 3.231 4.459 5.402 7.472 11.39 15.25 18.6 22.29 30.92 42.51 64.56 81.5 97.4 107.3 123.2 139.1 155.0 186.8
SCHEDULE 160 1/2 3/4 1 1 1/4 1 1/2 2 2 1/2 3 4 5 6 8 10 12 14 16 18 20 24
15 20 25 32 40 50 65 80 100 125 150 200 250 300 350 400 450 500 600
21.336 26.67 33.401 42.164 48.26 60.325 73.025 88.9 114.3 141.3 168.275 219.075 273.05 326.85 355.6 406.4 457.2 508 609.6
4.75 5.537 6.35 6.35 7.137 8.712 9.525 11.12 13.48 15.87 18.23 23.01 28.57 33.32 35.71 40.46 45.23 50.01 59.51
✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩
Midway Metals | The Stainless Steel Innovators | 9 th Edition | www.midwaymetals.com.au
1.94 2.882 4.231 5.602 7.23 11.07 14.89 21.3 33.49 49.04 67.4 111.1 172 238.5 281.3 364.7 459 563.9 806.3
1/2
3/4
1
1 1/4
1 1/2
2
2 1/2
3
3 1/2
4
5
6
8
10
12
15
20
25
32
40
50
65
80
90
100
125
150
200
250
300
3.5
3.8
4.3
5.1
6
6.7
7.5
8.6
10.5
11.5
14.4
16.4
20.8
19.8
24.8
24.1
30.1
30.1
3.1
3.4
3.8
4.5
5.3
5.9
6.7
7.6
9.3
10.2
12.7
14.6
18.4
17.6
22
21.4
26.8
26.8
100
2.7
3
3.3
3.9
4.7
5.2
5.8
6.7
8.1
8.9
11.1
12.8
16.1
15.4
19.2
18.7
23.4
23.4
150
2.5
2.8
3.1
3.6
4.3
4.8
5.4
6.2
7.5
8.3
10.3
11.8
14.9
14.2
17.9
17.4
21.7
21.7
200
2.4
2.6
2.9
3.4
4
4.5
5
5.8
7
7.7
9.6
11
13.9
13.3
16.6
16.2
20.2
20.2
250
2.2
2.4
2.7
3.2
3.8
4.2
4.8
5.5
8.7
7.3
9.1
10.5
13.2
12.6
15.8
15.4
19.2
19.2
300
2.2
2.4
2.6
3.1
3.7
4.1
4.6
5.3
6.4
7.1
8.8
10.1
12.8
12.2
15.3
14.9
18.5
18.5
350
2.1
2.3
2.6
3
3.6
4
4.5
5.1
6.2
6.8
8.5
9.8
12.3
11.8
14.7
14.4
17.9
17.9
400
7.4
8.5
9.3
10.6
11.6
13.2
14.1
15.5
17.7
16.2
19.1
21.1
25.3
26.9
32.5
33.8
40.9
42
50
6.5
7.5
8.3
9.4
10.3
11.7
12.6
13.7
15.7
14.4
16.9
18.7
22.5
23.9
28.9
30
36.3
37.3
100
5.7
6.6
7.3
8.2
9
10.2
11
12
13.7
12.6
14.8
16.4
19.7
20.9
25.3
26.2
31.8
32.6
150
=
P S t D
= = = =
Where:
P
Pressure Rating (MPa) Minimum Tensile Strength (MPa) Wall thickness (mm) Outside Diameter of Pipe (mm)
D
2xSxt
4.9
5.7
6.3
7.1
7.8
8.8
9.5
10.4
11.9
10.9
12.8
14.2
17
18.1
21.8
22.7
27.5
28.2
250
4.7
5.4
5.9
6.7
7.4
8.4
9
9.8
11.3
10.3
12.1
13.4
16.1
17.1
20.7
21.5
26
26.7
300
4.5
5.2
5.7
6.5
7.1
8.1
8.7
9.5
10.9
10
11.7
13
15.6
16.6
20
20.8
25.2
25.9
350
4.4
5
5.6
6.3
6.9
7.8
8.4
9.2
10.5
9.6
11.3
12.5
15.1
16
19.3
20.1
24.3
25
400
PIPE PRODUCTS
5.3
6.1
6.7
7.6
8.4
9.5
10.2
11.1
12.7
11.7
13.7
15.2
18.2
19.4
23.4
24.3
29.5
30.3
200
TEMPERATURE °C
SCHEDULE 40s
The Nominal Bursting Pressure of Seamless Pipe is calculated with the following formula:
3/8
1/4
8
10
1/8
6
50
TEMPERATURE °C
Inch
BORE SIZE
mm
SCHEDULE 10s
NOMINAL
9.8
11.6
14.5
16.3
16.9
18.7
19.9
21.5
24
23
26.3
28.8
34.1
36.6
43.8
46.8
55.2
58.6
50
8.7
10.3
12.9
14.5
15
16.6
17.7
19.1
21.3
20.4
23.4
25.5
30.3
32.5
38.9
41.6
49
52
100
7.6
9
11.3
12.7
13.1
14.5
15.4
16.7
18.7
17.8
20.4
22.3
26.5
28.4
34
36.4
42.8
45.5
150
7.1
8.4
10.4
11.7
12.2
13.5
14.3
15.5
17.3
16.6
19
20.7
24.6
26.4
31.6
33.7
39.7
42.2
200
6.6
7.8
9.7
11
11.3
12.6
13.4
14.4
16.1
15.4
17.7
19.3
22.9
24.6
29.4
31.4
37
39.3
250
6.2
7.4
9.2
10.4
10.7
11.9
12.7
13.7
15.3
14.6
16.7
18.3
21.7
23.3
27.9
29.8
35.1
37.3
300
TEMPERATURE °C
SCHEDULE 80s
6
7.2
8.9
10
10.4
11.5
12.2
13.2
14.8
14.1
16.2
17.7
21
22.6
27
28.8
33.9
36
350
5.8
6.9
8.6
9.7
10
11.1
11.8
12.8
14.3
13.7
15.6
17.1
20.3
21.8
26
27.8
32.8
34.8
400
NOMINAL BURSTING PRESSURE 29
TECHNICAL DATA FOR 304, 316 & 321 SEAMLESS PIPE
Midway Metals | The Stainless Steel Innovators | 9 th Edition | www.midwaymetals.com.au
50
5
4.2
1 1/2
2
2 1/2
3
3 1/2
4
5
6
8
10
12
40
50
65
80
90
100
125
150
200
250
300
17.3
100
2.6
2.8
3.1
3.7
4.4
4.9
5.5
6.2
7.6
8.4
10.4
11.9
15.1
14.4
18
17.6
21.9
21.9
2.2
2.4
2.7
3.2
3.8
4.2
4.7
5.4
8.6
7.2
9
10.3
13.1
12.4
15.6
15.2
19
19
150
2
2.2
2.5
2.9
3.5
3.9
4.4
5
6.1
6.7
8.3
9.5
12
11.5
14.4
14
17.5
17.5
200
1.9
2.1
2.3
2.7
3.2
3.6
4
4.6
5.6
6.2
7.7
8.8
11.2
10.6
13.3
13
16.2
16.2
250
1.8
1.9
2.2
2.5
3
3.4
3.8
4.3
5.3
5.8
7.2
8.3
10.4
10
12.5
12.2
15.2
15.2
300
1.7
1.9
2.1
2.5
2.9
3.3
3.7
4.2
5.1
5.6
7
8
10.2
9.7
12.1
11.8
14.8
14.7
350
1.7
1.8
2
2.4
2.8
3.1
3.5
4
4.9
5.4
6.7
7.7
9.7
9.3
11.6
11.3
14.1
14.1
400
6.1
7.1
7.8
8.8
9.7
11
11.8
12.9
14.7
15.9
17.6
21.1
22.4
27.4
27.1
28.1
34
35
50
5.4
6.2
6.8
7.7
8.4
9.6
10.3
11.2
12.9
11.8
13.9
15.4
18.4
19.6
23.7
24.6
29.8
30.5
100
SCHEDULE 40s
4.6
5.3
5.9
6.7
7.3
8.3
8.9
9.7
11.1
10.2
12
13.3
15.9
16.9
20.5
21.3
25.8
26.5
150
4.3
4.9
5.4
6.1
6.7
7.7
8.2
9
10.3
9.4
11.1
12.3
14.7
15.6
18.9
19.6
23.7
24.4
200
4
4.6
5
5.7
6.2
7.1
7.6
8.3
9.5
8.7
10.3
11.4
13.6
14.5
17.5
18.2
22
22.6
250
3.7
4.3
4.7
5.3
5.8
6.6
7.1
7.8
8.9
8.2
9.6
10.6
12.8
13.5
16.4
17
20.6
21.2
300
TEMPERATURE °C
3.6
4.2
4.6
5.2
5.7
6.5
6.9
7.6
8.7
7.9
9.3
10.3
12.4
13.2
15.9
16.5
20
20.6
350
Midway Metals | The Stainless Steel Innovators | 9 th Edition | www.midwaymetals.com.au
To bursting pressure for small/regular pressure fluctuations.
8
The figures given for nominal working pressures and factor of safety are for quick reference purposes only. Detailed design calculations should be in accordance with the applicable design standard.
12 To bursting pressure for large/prolonged pressure fluctuations.
To bursting pressure for no pressure fluctuations.
5
Where pressures or temperature fluctuations occur, increased safety factors should be adopted. Listed below are factors of safety recommended for varying pressure conditions.
The figures above are Nominal Working Pressure for 304L and 316L Seamless Stainless Steel Pipe under constant operating conditions, in MPa.
2.9
3.2
3.6
5.6
6.3
7.1
8.7
9.6
11.9
13.7
1
1 1/4
16.5
32
3/4
20
20.6
25
1/2
15
20.1
25.1
1/4
3/8
8
1/8
6
10
25.1
Inch
mm
SCHEDULE 10s
TEMPERATURE °C
NOMINAL
BORE SIZE
8.2
9.7
12.1
13.6
14
15.6
16.6
17.9
20
19.1
21.9
23.9
28.4
30.5
36.5
39
45.9
48.7
50
7.1
8.5
10.5
11.9
12.3
13.6
14.5
15.6
17.5
16.7
19.1
20.9
24.8
26.7
31.9
34.1
40.1
42.6
100
SCHEDULE 80s
6.2
7.3
9.1
10.3
10.6
11.8
12.5
13.5
15.1
14.5
16.6
18.1
21.15
23.1
27.6
29.5
34.7
36.9
150
5.7
6.8
8.4
9.5
9.8
10.9
11.6
12.4
13.9
13.3
15.3
16.7
19.8
21.3
25.4
27.2
32
34
200
5.3
6.3
7.8
8.8
9.1
10.1
10.7
11.6
12.9
12.4
14.2
15.5
18.4
19.7
23.6
25.2
29.7
31.5
250
4.9
5.9
7.3
8.2
8.5
9.4
10
10.8
12.1
11.6
13.3
14.5
17.2
18.5
22.1
23.6
27.8
29.5
300
TEMPERATURE °C
4.6
5.7
7.1
8
8.3
9.2
9.7
10.5
11.8
11.3
12.9
14.1
16.7
17.9
21.5
22.9
27
28.7
350
4.6
5.5
6.8
7.6
7.9
8.8
9.3
10.1
11.3
10.8
12.3
13.5
16
17.2
20.5
21.9
25.8
27.4
400
WELDED PIPE Nominal working pressure can be calculated by multiplying the figures in the tables by 0.85 (Weld Joint Efficiency factor).
3.4
4
4.4
5
5.4
6.2
6.6
7.2
8.3
7.6
8.9
9.9
11.9
12.6
15.2
15.8
19.2
19.7
400
PIPE PRODUCTS 30
NOMINAL WORKING PRESSURE
TECHNICAL DATA FOR 304L & 316L SEAMLESS PIPE
BUTTWELD PIPE FITTINGS SPECIFICATIONS:
31
ASTM A403 ANSI B16.9
MATERIAL:
WELDED / SEAMLESS
90° ELBOW LONG RADIUS
Inch
mm
304L
316L
SHORT RADIUS 304L
1/2 3/4 1 1 1/4 1 1/2 2 2 1/2 3 3 1/2 4 5 6 8 10 12
15 20 25 32 40 50 65 80 90 100 125 150 200 250 300
★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ✩ ★ ★ ★ ★
★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★
✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩
1/2 3/4 1 1 1/4 1 1/2 2 2 1/2 3 3 1/2 4 5 6 8 10 12
15 20 25 32 40 50 65 80 90 100 125 150 200 250 300
★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ✩ ★ ★ ★ ★
★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★
✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩
NOTE:
45° ELBOW
EQUAL
LONG RADIUS
316L
304L
SCHEDULE 10 ✩ ★ ✩ ★ ✩ ★ ✩ ★ ✩ ★ ✩ ★ ✩ ★ ✩ ★ ✩ ★ ✩ ★ ✩ ✩ ✩ ★ ✩ ★ ✩ ✩ ✩ ✩ SCHEDULE 40 ✩ ★ ✩ ★ ✩ ★ ✩ ★ ✩ ★ ✩ ★ ✩ ★ ✩ ★ ✩ ★ ✩ ★ ✩ ✩ ✩ ★ ✩ ★ ✩ ✩ ✩ ✩
TEE
STUB END
CAPS
TYPE B
316L
304L
316L
304L
316L
316L
★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★
★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ✩ ✩
★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★
✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩
✩ ✩ ★ ★ ★ ★ ★ ★ ★ ★ ✩ ★ ★ ✩ ✩
✩ ✩ ★ ★ ★ ★ ★ ★ ✩ ★ ✩ ★ ★ ✩ ✩
★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★
★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ✩ ★ ★ ✩ ✩
★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★
✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩
✩ ✩ ★ ★ ★ ★ ★ ★ ★ ★ ✩ ★ ★ ✩ ✩
✩ ★ ★ ★ ★ ★ ★ ★ ✩ ★ ✩ ★ ★ ✩ ✩
SCH 80 FITTINGS ARE AVAILABLE ON REQUEST
Midway Metals | The Stainless Steel Innovators | 9 th Edition | www.midwaymetals.com.au
PIPE PRODUCTS
SIZE
32
REDUCING BUTTWELD PIPE FITTINGS SPECIFICATIONS:
ASTM A403 ANSI B16.9
MATERIAL:
WELDED / SEAMLESS
SIZE
CONCENTRIC REDUCER
PIPE PRODUCTS
SCH 10 Inch 3/4 x 1/2 1 x 1/2 1 x 3/4 1 1/4 x 1/2 1 1/4 x 3/4 1 1/4 x 1 1 1/2 x 1/2 1 1/2 x 3/4 1 1/2 x 1 1 1/2 x 1 1/4 2 x 3/4 2x1 2 x 1 1/4 2 x 1 1/2 2 1/2 x 1 2 1/2 x 1 1/4 2 1/2 x 1 1/2 2 1/2 x 2 3x1 3 x 1 1/4 3 x 1 1/2 3x2 3 x 2 1/2 3 1/2 x 1 1/2 3 1/2 x 2 3 1/2 x 2 1/2 3 1/2 x 3 4 x 1 1/2 4x2 4 x 2 1/2 4x3 4 x 3 1/2 5x2 5 x 2 1/2 5x3 5 x 3 1/2 5x4 6x2 6 x 2 1/2 6x3 6 x 3 1/2 6x4 6x5 8x3 8 x 3 1/2 8x4 8x5 8x6 10 x 4 10 x 5 10 x 6 10 x 8 12 x 5 12 x 6 12 x 8 12 x 10
mm 20 x 15 25 x 15 25 x 20 32 x 15 32 x 20 32 x 25 40 x 15 40 x 20 40 x 25 40 x 32 50 x 20 50 x 25 50 x 32 50 x 40 65 x 25 65 x 32 65 x 40 65 x 50 80 x 25 80 x 32 80 x 40 80 x 50 80 x 65 90 x 40 90 x 50 90 x 65 90 x 80 100 x 40 100 x 50 100 x 65 100 x 80 100 x 90 125 x 50 125 x 65 125 x 80 125 x 90 125 x 100 150 x 50 150 x 65 150 x 80 150 x 90 150 x 100 150 x 125 200 x 80 200 x 90 200 x 100 200 x 125 200 x 150 250 x 100 250 x 125 250 x 150 250 x 200 300 x 125 300 x 150 300 x 200 300 x 250
304L ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩
316L ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ✩ ★ ★ ★ ★ ✩ ★ ★ ★ ✩ ★ ★ ★ ✩ ✩ ✩ ✩ ★ ★ ★ ★ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ★ ✩ ★ ✩ ✩ ✩ ★ ✩ ★ ✩ ✩ ★ ★ ✩ ✩ ★ ★
SCH 40 304L ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩
316L ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ✩ ★ ★ ★ ★ ✩ ★ ★ ★ ✩ ★ ★ ★ ✩ ✩ ✩ ✩ ✩ ★ ★ ★ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ★ ✩ ★ ✩ ✩ ✩ ★ ✩ ★ ✩ ✩ ★ ★ ✩ ✩ ★ ★
ECCENTRIC REDUCER
REDUCING TEE
SCH 10
SCH 40
SCH10
SCH 40
316L ✩ ✩ ★ ✩ ✩ ✩ ✩ ★ ★ ★ ✩ ★ ★ ★ ✩ ✩ ★ ★ ✩ ✩ ★ ★ ★ ✩ ✩ ✩ ✩ ✩ ★ ★ ★ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ★ ✩ ★ ✩ ✩ ✩ ★ ✩ ★ ✩ ✩ ✩ ★ ✩ ✩ ★ ★
316L ✩ ✩ ★ ✩ ✩ ✩ ✩ ★ ★ ★ ✩ ★ ★ ★ ✩ ✩ ★ ★ ✩ ✩ ★ ★ ★ ✩ ✩ ✩ ✩ ✩ ★ ★ ★ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ★ ✩ ★ ✩ ✩ ✩ ★ ✩ ★ ✩ ✩ ✩ ★ ✩ ✩ ✩ ✩
316L ✩ ✩ ✩
316L ✩ ✩ ✩
✩ ✩
✩ ✩
✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩
✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩
Midway Metals | The Stainless Steel Innovators | 9 th Edition | www.midwaymetals.com.au
TECHNICAL DATA BUTTWELD PIPE FITTING DIMENSIONS
NOMINAL PIPE SIZE
90° LONG RADIUS ELBOW
OUTSIDE DIAMETER
45° ELBOW
mm 15 20 25 32 40 50 65 80 90 100 125 150 200 250 300
O.D. 21.3 26.7 33.4 42.2 48.3 60.3 73 88.9 101.6 114.3 141.3 168.3 219.1 273 323.9
NOMINAL PIPE SIZE Inch 1/2 3/4 1 1 1/4 1 1/2 2 2 1/2 3 3 1/2 4 5 6 8 10 12
mm 15 20 25 32 40 50 65 80 90 100 125 150 200 250 300
5S 1.65 1.65 1.65 1.65 1.64 1.65 2.11 2.11 2.11 2.11 2.77 2.77 2.77 3.4 3.96
10S 2.11 2.11 2.77 2.77 2.77 2.77 3.05 3.05 3.05 3.05 3.4 3.4 3.76 4.19 4.57
40S 2.77 2.87 3.38 3.56 3.68 3.91 5.16 5.49 5.74 6.02 6.55 7.11 8.18 9.27 9.52
90° 80S 3.73 3.91 4.55 4.85 5.08 5.54 7.01 7.62 8.08 8.56 9.52 10.97 12.7 12.7 12.7
45°
L/R
S/R
L/R
A 38.1 28.5 38.1 47.5 57 76 95 114.5 133.5 152.5 190.5 228.5 305 381 457
A
B 16 11 22 25 29 35 45 51 57 64 79 95 127 159 191
25.4 32 38 51 63.5 76 89 101.5 127 152.5 203 254 305
EQUAL TEE
CAP
C,M 25.4 28.6 38.1 47.6 57.2 63.5 76.2 85.7 95.3 104.8 123.8 142.9 177.8 215.9 254
E 25.4 25.4 38 38 38 38 38 51 64 64 76 89 102 127 152
STUB END TYPE B
OUTSIDE DIAMETER O.D. 21.3 26.7 33.4 42.2 48.3 60.3 73 88.9 101.6 114.3 141.3 168.3 219.1 273 323.9
CAP
ELBOW
WALL THICKNESS SCHEDULE T
Inch 1/2 3/4 1 1 1/4 1 1/2 2 2 1/2 3 3 1/2 4 5 6 8 10 12
EQUAL TEE
MSS G 35 43 51 64 73 92 105 127 140 157 186 216 270 324 381
F 51 51 51 51 51 64 64 64 76 76 76 89 102 127 152
R 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 1.6 1.6 1.6 1.6 1.6 1.6
Midway Metals | The Stainless Steel Innovators | 9 th Edition | www.midwaymetals.com.au
PIPE PRODUCTS
90° SHORT RADIUS ELBOW
33
34
TECHNICAL DATA BUTTWELD PIPE FITTING DIMENSIONS
REDUCING TEE
CONCENTRIC REDUCER
PIPE PRODUCTS
NOMINAL PIPE SIZE Inch 3/4 x 1/2 1 x 1/2 x 3/4 1 1/4 x 1/2 x 3/4 x 1 1 1/2 x 1/2 x 3/4 x 1 x 1 1/4 2 x 3/4 x 1 x 1 1/4 x 1 1/2 2 1/2 x 1 x 1 1/4 x 1 1/2 x 2 3 x 1 x 1 1/4 x 1 1/2 x 2 x 2 1/2 3 1/2 x 1 1/2 x 2 x 2 1/2 x 3 4 x 1 1/2 x 2 x 2 1/2 x 3 x 3 1/2 5 x 2 x 2 1/2 x 3 x 3 1/2 x 4 6 x 2 x 2 1/2 x 3 x 3 1/2 x 4 x 5 8 x 3 x 3 1/2 x 4 x 5 x 6 10 x 4 x 5 x 6 x 8 12 x 5 x 6 x 8 x 10
mm 20 x 15 25 x 15 25 x 20 32 x 15 32 x 20 32 x 25 40 x 15 40 x 20 40 x 25 40 x 32 50 x 20 50 x 25 50 x 32 50 x 40 65 x 25 65 x 32 65 x 40 65 x 50 80 x 25 80 x 32 80 x 40 80 x 50 80 x 65 90 x 40 90 x 50 90 x 65 60 x 80 100 x 40 100 x 50 100 x 65 100 x 80 100 x 90 125 x 50 125 x 65 125 x 80 125 x 90 125 x 100 150 x 50 150 x 65 150 x 80 150 x 90 150 x 100 150 x 125 200 x 80 200 x 90 200 x 100 200 x 125 200 x 150 250 x 100 250 x 125 250 x 150 250 x 200 300 x 125 300 x 150 300 x 200 300 x 250
REDUCING TEE C 28.6 38.1 47.6
57.2
63.5
76.2
85.7
95.3
104.8
123.8
142.9
178
216
254
M 28.6 38.1 38.1 47.6 47.6 47.6 57.2 57.2 57.2 57.2 44.5 50.8 57.2 60.3 57.2 63.5 66.7 69.9 66.7 69.9 73 76.2 82.6 79.4 82.6 88.9 92.1 85.7 88.9 95.3 98.4 101.6 104.8 108 111.1 114.3 117.5 117.5 120.7 123.8 127 130.1 136.5 149.1 152 155 162 168 184 191 194 203 216 219 229 241
ECCENTRIC REDUCER REDUCERS CONCENTRIC & ECCENTRIC H 38.1 50.8 50.8
63.5
76.2
88.9
88.9
101.6
101.6
127
139.7
152
178
203
Midway Metals | The Stainless Steel Innovators | 9 th Edition | www.midwaymetals.com.au
150LB BSPTHREADED FITTINGS SPECIFICATIONS:
ASTM A351-77
GRADE:
316
THREAD:
BSP (MALE-TAPER, FEMALE PARALLEL)
PRESSURE:
NOMINAL WORKING
35
Inch
mm
SOCKET ROUND
NIPPLE HEX
BARRELL NIPPLE
TOE NIPPLE
UNION 3 PCE
ELBOW 90˚ FEM
ELBOW 90˚ M/F
ELBOW 45˚ F/F
TEE FEM
HEX CAP
HEX PLUG FEM
LOCK NUT
HOSE TAIL
1/8 1/4 3/8 1/2 3/4 1 1 1/4 1 1/2 2 2 1/2 3 4 6
6 8 10 15 20 25 32 40 50 65 80 100 150
★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ✩
★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ✩
★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ✩
★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ✩
★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ✩
★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ✩
★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ✩
✩ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ✩ ✩
★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ✩
★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ✩
★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ✩
★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ✩
★ ★ ★ ★ ★ ★ ★ ★ ★ ✩ ✩ ✩ ✩
Inch
mm
HEX REDUCING BUSH
HEX REDUCING NIPPLE
REDUCING SOCKET
1/4 x 1/8 3/8 x 1/8 3/8 x 1/4 1/2 x 1/8 1/2 x 1/4 1/2 x 3/8 3/4 x 18 3/4 x 1/4 3/4 x 1/8 3/4 x 1/2 1 x 1/4 1 x 3/8 1 x 1/2 1 x 3/4 1 1/2 x 3/8 1 1/4 x 1/2 1 1/4 x 3/4 1 1/4 x 1 1 1/2 x 1/2 1 1/2 x 3/4 1 1/2 x 1 1 1/2 x 1 1/4 2 x 3/4 2x1 2 x 1 1/4 2 x 1 1/2 2 1/2 x 1 1/4 2 1/2 x 2 3x2 3 x 2 1/2 4x3
8x6 10 x 6 10 x 8 15 x 6 15 x 8 15 x 10 20 x 6 20 x 8 20 x 10 20 x 15 25 x 8 25 x 10 25 x 15 25 x 20 32 x 10 32 x 15 32 x 20 32 x 25 40 x 15 40 x 20 40 x 25 40 x 32 50 x 20 50 x 25 50 x 32 50 x 40 65 x 32 65 x 50 80 x 50 80 x 65 100 x 80
★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ✩ ✩
★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ✩ ✩
✩ ✩ ★ ✩ ★ ★ ✩ ✩ ★ ★ ✩ ✩ ★ ★ ✩ ✩ ✩ ★ ✩ ✩ ★ ★ ✩ ★ ★ ★ ✩ ✩ ✩ ✩
✩
Midway Metals | The Stainless Steel Innovators | 9 th Edition | www.midwaymetals.com.au
PIPE PRODUCTS
1000kPA 2000kPA TEST
36
150LB BSPTHREADED FITTINGS TECHNCIAL DATA
L
L
HEX NIPPLE
BARREL NIPPLE
L
SOCKET
L
L
TOE NIPPLE
L
L
L
L1
L
ELBOW 90Deg F/F
ELBOW 90Deg M/F
ELBOW 45Deg F/F
L
UNION 3 PCE F/F
L
L L
TEE F/F
HEXAGON CAP
HEXAGON PLUG
LOCK NUT
L
L L
PIPE PRODUCTS
L
L
HEX REDUCING BUSH
HOSE TAIL
SIZE mm LENGTH mm FITTING Socket Hexagon Nipple Barrel Nipple Toe Nipple Union 3 Pce F/F Elbow 90Deg F/F Elbow 90Deg M/F Elbow 45Deg F/F Tee F/F Hexagon Cap Hexagon Plug Lock Nut Hose Tail Hex Reducing Bush Hex Reducing Nipple Reducing Socket
6 L 20 31 40 30 37 17 18 16 18 16 17 8.5
8 L1
L
10 L1
L
L1
HEX REDUCING NIPPLE
15 L
L1
20 L
L1
25 L
32
L1
L
25 26 34 36 43 33 42 50 51 63 40 40 60 60 60 30 30 35 40 40 37 39 41 42 51 19.5 24 29 32 37 26 21 29 24 36 27 41 33 47 37 53 17 19 21 24 28 19.5 23 29 32.5 37 20 21 22.5 23 26 18 23.5 28 28 34 8.5 9 9 10 11 46.5 51.5 62.5 72.5 82 22.5 23 25.5 26.5 33.5 31.5 35 39 42 46 28.5 41 45 45 50
48 59 80 50 52 44 44 33 45 29 35 12 80 34 52 50
L1
63
REDUCING SOCKET
40
50 L
L1
65 L
L1
80
L
L1
48 64 80 50 56 48 47 36 48 32 36 13 93 36 53 57
56 65 71 83 68 73 86 90 100 100 120 120 50 60 70 80 60 75 89 99 55.5 67 77 96 69 59 80 66 105 77 113 98 130 42 49 54 65 56.5 68 79 97 35 42 46 55 37.5 40 45 51 13.5 18 21 22 110 136 147 158 36 49 50 51 58 65 73 83 67 76 85 96
Midway Metals | The Stainless Steel Innovators | 9 th Edition | www.midwaymetals.com.au
L
L1
100 L
L1
150LB BSPTHREADED FITTINGS TECHNCIAL DATA
37
BRITISH STANDARD THREADS (BSP) Taper 1 in 16 on diagram (Shown exaggerated in diagram)
Taper H = 0.960237xp h = 0.610327xp r = 0.127278xp
27 1/2 º
L2
Hh
90 º
Axis of screw
D
L1
r
PITCH
NOMINAL BORE OF PIPE
OUTSIDE DIAMETER OF S.S. PIPE
NUMBER OF THREADS PER INCH
PITCH
DEPTH OF THREAD
DIAMETER AT GAUGE PLANE (GAUGE DIA.)
DISTANCE OF GAUGE DIA. (GAUGE LENGTH)
LENGTH OF USEFUL THREAD
NB
Inch
D
h
E
L1
L2
6
1/8
0.405
28
0.03571
0.0229
0.383
0.1563
0.2545
8
1/4
0.540
19
0.05263
0.0337
0.518
0.2367
0.3314
10
3/8
0.675
19
0.05263
0.0337
0.656
0.2500
0.3947
15
1/2
0.840
14
0.07143
0.0457
0.825
0.3214
0.5178
20
3/4
1.050
14
0.07143
0.0457
1.041
0.3750
0.5714
25
1
1.315
11
0.09091
0.0582
1.309
0.4091
0.6591
32
1 1/4
1.660
11
0.09091
0.0582
1.650
0.5000
0.7500
40
1 1/2
1.900
11
0.09091
0.0582
1.882
0.5000
0.7500
50
2
2.375
11
0.09091
0.0582
2.347
0.6250
0.9204
65
2 1/2
2.875
11
0.09091
0.0582
2.950
0.6875
1.0511
80
3
3.500
11
0.09091
0.0582
3.460
0.8125
1.1761
100
4
4.500
11
0.09091
0.0582
4.450
1.0000
1.4091
125
5
5.563
11
0.09091
0.0582
5.40
1.1250
1.5795
150
6
6.625
11
0.09091
0.0582
6.450
1.1250
1.5795
Midway Metals | The Stainless Steel Innovators | 9 th Edition | www.midwaymetals.com.au
PIPE PRODUCTS
E
38
3000LB FITTINGS SPECIFICATIONS:
ASTM A182/ANSI B16/11 NPT THREAD
mm
FULL COUPLING
HALF COUPLING
UNION 3 PCE
1/8 1/4 3/8 1/2 3/4 1 1 1/4 1 1/2 2
6 8 10 15 20 25 32 40 50
★ ★ ★ ★ ★ ★ ★ ★ ★
✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩
★ ★ ★ ★ ★ ★ ★ ★ ★
PIPE PRODUCTS
Inch
SPECIFICATIONS:
SCHEDULE - NOMINAL Inch 1/4 3/8 1/2 3/4 1 1 1/4 1 1/2 2
mm 8 10 15 20 25 32 40 50
316
PRESSURE:
3000LB (ICPA)
90° ELBOW 45° ELBOW TEE HEX FEMALE FEMALE FEMALE NIPPLE
✩ ★ ★ ★ ★ ★ ★ ★ ★
SIZE - NOMINAL Inch 1/4 x 1/8 3/8 x 1/8 3/8 x 1/4 1/2 x 1/4 1/2 x 3/8 3/4 x 1/2 1 x 1/4 1 x 1/2 1 x 3/4 1 1/4 x 3/4 1 1/4 x 1 1 1/2 x 3/4 1 1/2 x 1 2 x 3/4 2x1 2 x 1 1/2
GRADE:
✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩
✩ ★ ★ ★ ★ ★ ★ ★ ★
★ ★ ★ ★ ★ ★ ★ ★ ★
HEX PLUG
★ ★ ★ ★ ★ ★ ★ ★ ★
HEX REDUCING BUSH
HEX REDUCING NIPPLE
★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★
★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★
mm 8x6 10 x 6 10 x 8 15 x 8 15 x 10 20 x 15 25 x 8 25 x 15 25 x 20 32 x 20 32 x 25 40 x 20 20 x 25 50 x 20 50 x 25 50 x 40
ASTM A182/ANSI B16/11 3000LB SOCKETWELD
GRADE:
316
PRESSURE:
3000LB (ICPA)
FULL COUPLING
HALF COUPLING
UNION 3 PCE
90° ELBOW FEMALE
45° ELBOW FEMALE
EQUAL TEE FEMALE
CAP
✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩
✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩
✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩
✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩
✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩
✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩
✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩
Midway Metals | The Stainless Steel Innovators | 9 th Edition | www.midwaymetals.com.au
3000LB NPT THREADED FITTINGS TECHNICAL DATA
39
L L
L
L
FULL COUPLING
HALF COUPLING
HEXAGON NIPPLE
L
UNION 3 PCE F/F
L
L
L
ELBOW 45 DEG F/F
TEE F/F
HEXAGON PLUG
L
3000LB NPT THREADED FITTINGS TECHNICAL DATA L
HEX REDUCING BUSH
HEX REDUCING NIPPLE
SIZE mm
6
8
10
15
20
25
32
40
50
LENGTH mm
L
L
L
L
L
L
L
L
L
Full Coupling
32
35
38
48
51
60
67
79
86
Half Coupling
16
17.5
19
24
25.5
30
33.5
39.5
43
Hexagon Nipple
26
36
36
47
48
59
60
62
68
Union 3 Pce F/F
41.4
41.4
46
49
56.9
62
71.1
76.5
86.1
Elbow 90 Deg F/F
21
25
28
33
38
44
51
60
64
Elbow 45 Deg F/F
17
19
22
25
28
33
35
43
44
Tee F/F
21
25
28
33
38
44
51
60
64
Hexagon Plug
16
17
21
22
26
29
31
37
38
14
17
19
22
25
28
29
31
19
24
30
35
46
50
65
FITTING
Hex Reducing Bush Hex Reducing Nipple
Midway Metals | The Stainless Steel Innovators | 9 th Edition | www.midwaymetals.com.au
PIPE PRODUCTS
ELBOW 90 DEG F/F
40
TECHNICAL DATA DIMENSIONS OF PIPETHREAD AMERICAN STANDARD THREADS (NPT)
P - Pitch
axis 0.033P H
30 º
H
60 º
30 º
D
L1
H.0.03
F
Taper
90 º
L2 = (0.8D÷6.8)1/n
axis
PIPE PRODUCTS
Straight Pipe Threads: the pitch, angle and depth of thread are the same as the corresponding dimensions of the taper threads
NOMINAL BORE OF PIPE
OUTSIDE DIAMETER OF S.S. PIPE
NUMBER OF THREADS PER INCH
PITCH
HAND TIGHT
EFFECTIVE ENGAGEMENT EXTERNAL
THREAD LENGTH THREAD
DEPTH
NB
Inch
D
n
P
L1
E1
L2
h
6
1/8
0.405
27
0.03704
0.180
0.37476
0.2639
0.02963
8
1/4
0.540
18
0.05556
0.200
0.48989
0.4018
0.04444
10
3/8
0.675
18
0.05556
0.240
0.62701
0.4078
0.04444
15
1/2
0.840
14
0.07143
0.230
0.77843
0.5337
0.05714
20
3/4
1.050
14
0.07143
0.339
0.98887
0.5457
0.05714
25
1
1.315
11 1/2
0.08696
0.400
1.23863
0.6828
0.06957
32
1 1/4
1.660
11 1/2
0.08696
0.420
1.56338
0.7068
0.06957
40
1 1/2
1.900
11 1/2
0.08696
0.420
1.82234
0.7235
0.06957
50
2
2.375
11 1/2
0.08696
0.436
2.29627
0.7665
0.06957
65
2 1/2
2.875
8
0.12500
0.682
2.76216
1.1375
0.10000
80
3
3.500
8
0.12500
0.766
3.38850
1.2000
0.10000
90
3 1/2
4.000
8
0.12500
0.821
3.88881
1.2500
0.10000
100
4
4.500
8
0.12500
0.844
4.38712
1.3000
0.10000
125
5
5.563
8
0.12500
0.937
5.44929
1.4063
0.10000
150
6
6.625
8
0.12500
0.958
6.50597
1.5121
0.10000
Midway Metals | The Stainless Steel Innovators | 9 th Edition | www.midwaymetals.com.au
TECHNICAL DATA SOCKET WELD FITTINGS
41
L
L
L
L
HALF COUPLING
UNION 3 PCE F/F
ELBOW 90 DEG F/F
L
ELBOW 45 DEG F/F
TEE F/F
CAP
SIZE mm
6
8
10
15
20
25
32
40
50
LENGTH mm
L
L
L
L
L
L
L
L
L
Full Coupling
25.4
25.4
28.7
35
38.1
44.5
47.8
50.8
63.5
Half Coupling
25.4
25.4
28.7
35
38.1
44.5
47.8
50.8
63.5
Union 3 Pce F/F
41.4
41.4
46
49.3
57.2
63.5
71.4
76.2
85.9
Elbow 90 Deg F/F
20.6
20.6
24.7
28.7
33.3
38.1
44.5
50.8
60.5
Elbow 45 Deg F/F
17.5
17.5
19
22.4
25.4
28.7
33.3
35
42.4
Tee F/F
20.6
20.6
24.7
28.7
33.3
38.1
44.5
50.8
60.5
Cap
17.5
17.5
19
22.4
24.4
27
30.3
31.8
38.1
FITTING
Midway Metals | The Stainless Steel Innovators | 9 th Edition | www.midwaymetals.com.au
PIPE PRODUCTS
L
L
FULL COUPLING
42
FORGED FLANGES SPECIFICATIONS:
ASTM A182 ANSI B16.5 RAISED FACE FLANGES
TYPE:
SLIP ON WELD NECK BLIND
CLASS:
150LB, 300LB, 600LB
GRADE
PIPE PRODUCTS
304L
316L
SIZE N.B. mm 15 20 25 32 40 50 65 80 100 150 200 250 300 15 20 25 32 40 50 65 80 100 125 150 200 250 300 350 400 450 500 600
RFSO RFWN SCH10,40 & 80 RFB
SLIP ON RAISED FACE
WELD NECK RAISED FACE
BLIND RAISED FACE
150lb
300lb
600lb
150lb
300lb
600lb
150lb
300lb
600lb
✩ ✩ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ✩ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ✩ ★ ★
✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ★ ★ ★ ★ ★ ★ ★ ✩ ★ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩
✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩
✩ ✩ ★ ★ ★ ★ ★ ★ ★ ★ ★ ✩ ✩ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ✩ ✩ ✩ ✩ ✩ ✩ ✩
✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩
✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩
✩ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ✩ ✩ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ✩ ✩ ✩
✩ ✩ ✩ ✩ ✩ ★ ✩ ★ ★ ★ ✩ ✩ ✩ ✩ ✩ ★ ★ ★ ★ ★ ★ ★ ✩ ★ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩
✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩
Midway Metals | The Stainless Steel Innovators | 9 th Edition | www.midwaymetals.com.au
TECHNICAL DATA FORGED FLANGE DIMENSIONS
BOLT
150lb
300lb
WELD NECK
SIZE
OUTSIDE DIA. OF PIPE
OUTSIDE DIA. MIN.
THICK. MIN.
mm 15 20 25 32 40 50 65 80 100 150 200 250 300 350 400 450 500 600 15 20 25 32 40 50 65 80 100 150 200 250 300 350 400 450 500 600
A 21.3 26.9 33.7 42.2 48.3 60.3 73 88.9 114.3 168.3 219.1 273 323.9 355.6 406.4 457.2 508.0 600.6 21.3 26.9 33.7 42.2 48.3 60.3 73 88.9 114.3 168.3 219.1 273 323.9 355.6 406.4 457.2 508.0 609.6
B 90 98 108 117 127 152 178 191 229 279 343 406 483 535 600 635 700 815 95 117 124 133 156 165 191 210 254 318 381 445 520 585 650 710 775 915
C 11.5 13 14.5 16 17.5 19.5 25 25 25 25.5 29 30.5 32.0 35.0 37.0 40.0 43.0 48 14.5 16 17.5 19.5 21 22.5 25 29 30 37 41.5 48 51.0 54.0 57.5 60.5 63.5 70.0
RAISED RAISED FACE FACE THICK. DIA. D 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6
E 34.9 42.9 50.8 63.5 73 92.1 104.8 127 157.2 215.9 269.9 323.8 381.0 412.8 469.9 533.4 584.2 692.2 34.9 42.9 50.8 63.5 73 92.1 104.8 127 157.2 215.9 269.9 323.8 381.0 412.8 469.9 533.4 584.2 692.2
BLIND
HUB. DIA
HUB DIA. BEGIN OF CHAMFER
F 30 38 49 59 65 78 90 108 135 192 246 305 365 400 457 505 559 664 38 48 54 64 70 84 100 118 146 206 260 321 375 426 483 533 587 702
G 21.5 26.5 34.5 43 48.5 62 74.7 91 116 178 229 276 324.0 355.5 406.5 457.0 508.0 609.5 21.5 26.5 33.5 42 48.5 60.5 73 89 114.5 168.5 219 273 324.0 355.5 406.5 457.0 508.0 609.5
LENGTH/HUB SLIP-ON W.NECK
BOLT CIRCLE DIA.
BOLT HOLE DIA.
# HOLES
H 16 16 17 21 22 25 29 30 32 40 44 49 56 57 64 68 73 83 22 25 27 27 30 33 38 43 48 52 62 67 73 76 83 89 95 106
K 60.5 70 79.5 89 98.5 120.5 139.5 152.5 190.5 241.5 298.5 362 432.0 476.5 540.0 578.0 635.0 749.5 66.5 82.5 89 98.5 114.5 127 149 168.5 200 270 330 387.5 451.0 514.5 571.5 628.5 686.0 813.0
L 16 16 16 16 16 20 20 20 20 23 23 26 26 29 29 32 32 35 16 20 20 20 23 20 23 23 23 23 26 29 32 32 35 35 35 42
M 4 4 4 4 4 4 4 4 8 8 8 12 12 12 16 16 20 20 4 4 4 4 4 8 8 8 8 12 12 16 16 20 20 24 24 24
J 48 52 56 57 62 64 70 70 76 89 102 102 114 127 127 140 145 152 52 57 62 65 68 70 76 79 86 98 111 117 130 143 146 159 162 168
Midway Metals | The Stainless Steel Innovators | 9 th Edition | www.midwaymetals.com.au
PIPE PRODUCTS
SLIP-ON
43
44
PLATE FLANGES SPECIFICATIONS:
AS2129 TABLE FLANGES
TYPE:
SLIP-ON WELD BLIND
CLASS:
TABLE D, E, F & H
SOW BL
SLIP-ON
GRADE
SIZE N.B. mm
PIPE PRODUCTS
304L
316L
NOTE:
BLIND
TABLE D SLIP-ON
TABLE E
BLIND
TABLE F
TABLE H
SLIP-ON
BLIND
SLIP-ON
BLIND
SLIP-ON
BLIND
15
★
★
✩
✩
★
✩
20
★
★
✩
✩
★
✩
25
★
★
★
✩
★
✩
32
★
★
★
✩
★
✩
40
★
★
★
★
★
✩
★
✩
50
★
★
★
★
★
✩
★
✩
65
★
★
★
★
✩
✩
★
✩
80
★
★
★
★
★
✩
★
✩
100
★
★
★
★
✩
✩
★
✩
125
★
★
★
★
✩
✩
150
★
★
★
★
★
✩
✩
✩
200
★
★
★
★
✩
✩
✩
✩
250
★
★
★
★
✩
✩
✩
✩
300
★
★
★
★
✩
✩
✩
✩
15
★
★
★
✩
★
✩
20
★
★
★
✩
★
✩
25
★
★
✩
✩
★
✩
32
★
★
✩
✩
★
✩
40
★
★
★
★
✩
✩
★
✩
50
★
★
★
★
★
✩
★
✩
65
★
★
★
★
★
✩
★
✩
80
★
★
★
★
★
✩
★
✩
✩
✩
100
★
★
★
★
125
★
★
★
★
★
✩
✩
✩
150
★
★
★
★
✩
✩
✩
✩
200
★
★
★
★
250
★
★
★
★
✩
✩
✩
✩
✩
✩
✩
✩
300
★
★
★
★
✩
✩
✩
✩
Plate Flanges above 300mm are made to manufacture. Non Standard Flanges are our speciality.
Midway Metals | The Stainless Steel Innovators | 9 th Edition | www.midwaymetals.com.au
TECHNICAL DATA PLATE FLANGE DIMENSIONS
SLIP-ON
45
BLIND
SIZE
SLIP ON BORE
OUTER DIA.
THICKNESS
BOLT CIRCLE DIA.
# OF HOLES
DIA. OF HOLES
mm 15 20 25 32 40 50 65 80 90 100 125 150 200 250 300 350 375 400 450 500 550 600 700 750 800 850 900
SOW 22.3 27.6 34.5 43.1 49.5 61.9 74.6 90.6 103.3 116 143.7 170.6 221.4 276.3 327.1 359.1 381 410.4 461.7 513 564.3 615.9 717.5 768.3 819.1 869.9 920.7
OD 95 100 115 120 135 150 165 185 205 215 255 280 335 405 455 525 550 580 640 705 760 825 910 995 1060 1090 1175
TK 5 5 5 6 6 8 8 10 10 10 13 13 13 16 19 22 22 22 25 29 29 32 38 38 38 50 50
PCD 67 73 83 87 98 114 127 146 165 178 210 235 292 356 406 470 495 521 584 641 699 756 845 927 984 1016 1092
4 4 4 4 4 4 4 4 4 4 8 8 8 8 12 12 12 12 12 16 16 16 20 20 20 20 24
14 14 14 14 14 18 18 18 18 18 18 18 18 22 22 26 26 26 26 26 30 30 30 33 36 36 36
SIZE
SLIP ON BORE
OUTER DIA.
THICKNESS
BOLT CIRCLE DIA.
# OF HOLES
DIA. OF HOLES
mm 15 20 25 32 40 50 65 80 90 100 125 150 200 250 300 350 375 400 450 500 550 600 700 750 800 850 900
SOW 22.3 27.6 34.5 43.1 49.5 61.9 74.6 90.6 103.3 116 143.7 170.6 221.4 276.3 327.1 359.1 410.4 410.4 461.7 513 564.3 615.9 717.5 768.3 819.1 869.9 920.7
OD 95 100 115 120 135 150 165 185 205 215 255 280 335 405 455 525 550 580 640 705 760 825 910 995 1060 1090 1175
TK 6 6 7 8 9 10 10 11 13 13 14 17 19 22 25 29 32 32 35 38 44 48 54 54 54 57 64
PCD 67 73 83 87 98 114 127 146 165 178 210 235 292 356 406 470 495 521 584 641 699 756 845 927 984 1016 1092
4 4 4 4 4 4 4 4 8 8 8 8 8 12 12 12 12 12 16 16 16 16 20 20 20 20 24
14 14 14 14 14 18 18 18 18 18 18 22 22 22 26 26 26 26 26 26 30 33 33 36 36 36 36
TABLE E
Midway Metals | The Stainless Steel Innovators | 9 th Edition | www.midwaymetals.com.au
PIPE PRODUCTS
TABLE D
46
TECHNICAL DATA PLATE FLANGE DIMENSIONS
SLIP-ON
BLIND
PIPE PRODUCTS
TABLE F SIZE
SLIP ON BORE
OUTER DIA.
THICKNESS
BOLT CIRCLE DIA.
# OF HOLES
DIA. OF HOLES
mm 15 20 25 32 40 50 65 80 90 100 125 150 200 250 300 350 375 400 450 500 550 600 700 750 800 850 900
SOW 22.3 27.6 34.5 43.1 49.5 61.9 74.6 90.6 103.3 116 143.7 170.6 221.4 276.3 327.1 359.1 410.4 410.4 461.7 513 564.3 615.9 717.5 768.3 819.1 869.9 920.7
OD 95 100 120 135 140 165 185 205 215 230 280 305 370 430 490 550 580 610 675 735 785 850 935 1015 1060 1090 1185
TK 10 10 10 13 13 16 16 16 19 19 22 22 25 29 32 35 38 41 44 51 54 57 60 67 68 70 76
PCD 67 73 87 98 105 127 146 165 178 191 235 260 324 381 438 495 521 552 610 673 724 781 857 940 984 1016 1105
4 4 4 4 4 4 8 8 8 8 8 12 12 12 16 16 16 20 20 24 24 24 24 28 28 32 32
14 14 18 18 18 18 18 18 18 18 22 22 22 26 26 30 30 30 33 33 33 36 36 36 36 36 39
SIZE
SLIP ON BORE
OUTER DIA.
THICKNESS
BOLT CIRCLE DIA.
# OF HOLES
DIA. OF HOLES
mm 15 20 25 32 40 50 65 80 90 100 125 150 200 250 300 350 375 400 450 500 550 600
SOW 22.3 27.6 34.5 43.1 49.5 61.9 74.6 90.6 103.3 116 143.7 170.6 221.4 276.3 327.1 359.1 410.4 410.4 461.7 513 564.3 615.9
OD 115 115 120 135 140 165 185 205 215 230 280 305 370 430 490 550 580 610 675 735 785 850
TK 13 13 14 17 17 19 19 22 22 25 29 29 32 35 41 48 50 54 60 67 70 76
PCD 83 83 87 98 105 127 146 165 178 191 235 260 324 381 438 495 521 552 610 673 724 781
4 4 4 4 4 4 8 8 8 8 8 12 12 12 16 16 16 20 20 24 24 24
18 18 18 18 18 18 18 18 18 18 22 22 22 26 26 30 30 30 33 33 33 36
TABLE H
Midway Metals | The Stainless Steel Innovators | 9 th Edition | www.midwaymetals.com.au
WELDED ROUNDTUBE SPECIFICATIONS:
ASTM A554 ASTM A269 AS1528
LENGTHS:
6 METRES
FINISH:
MILL FINISH POLISHED 320 GRIT POLISHED MIDWAY MIRROR ANNEALED POLISHED 600 GRIT FOOD POLISHED 320 GRIT
OD 6.35 6.35 7.94 9.53 9.53 9.53 12.7 12.7 15.9 15.9 19.05 19.05 19.05 22.2 22.2 25.4 25.4 25.4 28.6 28.6 31.8 31.8 31.8 38.1 38.1 38.1 41.28 44.4 44.4 50.8 50.8 50.8 50.8 57.15 63.5 63.5 63.5 63.5 76.2 76.2 76.2 76.2 88.9 101.6 101.6 127 152.4 203.2
W P M PA F
T304
WT 0.7 0.9 0.9 0.9 1.2 1.6 1.2 1.6 1.2 1.6 0.9 1.2 1.6 1.2 1.6 0.9 1.2 1.6 1.2 1.6 1.2 1.6 3.0 1.2 1.6 3.0 1.6 1.2 1.6 1.2 1.6 2.0 3.0 1.6 1.2 1.6 2.0 3.0 1.2 1.6 2.0 3.0 1.6 1.6 2.0 1.6 1.6 2.0
M
T316
W
P
✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ★ ✩ ✩ ✩ ✩ ★ ✩ ✩ ✩ ★
✩ ✩ ✩ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ✩ ★ ★ ★ ★ ✩ ✩ ★ ★
PA
✩ ✩ ✩ ✩ ✩ ★ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ★ ✩ ✩ ✩ ✩
✩ ★
★ ★
F
W
P
✩ ★ ★ ★ ✩
F
PA
★
✩ ✩ ✩ ✩ ✩ ✩
✩ ★ ✩ ★ ✩ ★
★ ★
✩ ★ ✩ ✩ ✩ ✩ ★ ✩ ✩ ✩ ★
★ ★ ★ ★ ✩ ★ ★ ✩ ✩ ★ ★
✩ ★
★ ★
✩ ★
✩ ★
✩ ✩ ✩ ★
★ ★ ★
★ ✩ ★
★ ✩ ★ ★
★
★ ✩ ✩ ✩ ★ ✩
M
★
★ ★ ★ ★ ✩ ★
★ ★ ★ ★ ★ ★ ★ ✩ ★ ★ ★ ✩
★
✩ ★ ✩ ★ ✩ ✩ ★
★
✩ ★
★
✩ ★
★ ✩ ★
★
★ ✩ ★
★
★
✩
★
✩ ✩
★
✩ ✩
★ ★ ✩ ★ ★ ★ ★
★ ✩ ★
✩ ★
✩ ✩
★
★
★ ★
✩ ★ ✩
✩ ★ ✩
✩ ✩
✩ ★
★ ★
★ ★ ★
★ ★
★ ★
✩ ✩
★
★ ★
★ ★
★ ★ ★
★ ★ ✩
★ ★ ★
★ ★ ★
★
★
★ ★
✩
Midway Metals | The Stainless Steel Innovators | 9 th Edition | www.midwaymetals.com.au
TUBE PRODUCTS
SIZE mm
47
48
ARCHITECTURALTUBE SPECIFICATIONS:
ASTM A554
LENGTH:
6 METRES
FINISH:
POLISHED MIRROR POLISHED 400 grit
M P
SLOTTED HAND RAIL SIZE
T304
T316
mm
TUBE PRODUCTS
P
M
50.8 x 1.5 - Single Slot
✩
★
★
63.5 x 1.5 - Single Slot
✩
★
★
72.2 x 1.5 - Single Slot
✩
★
★
50.8 x 1.5 - Double Slot
✩
★
★
50.8 x 1.5 - 90 Degree Slot
✩
★
★
OVAL / D TUBE SIZE
T304
T316
mm
M
M
32 x 63 x 1.5mm - ‘D’
✩
★
23 x 38 x 1.5mm - Oval
✩
★
28 x 46 x 1.5mm - Oval
✩
★
38 x 62 x 1.5mm - Oval
✩
★
47 x 75 x 1.5mm - Oval
✩
★
SIZE
T304
T316
mm
M
M
37 x 25 x 1.5mm
✩
★
T304
T316
TRIANGULAR TUBE
RIGI TUBE - DEC N9 PATTERN SIZE mm
P
P
31.8 x 1.2 - Reverse Pattern
✩
✩
31.8 x 1.5 - Standard Pattern
★
✩
Midway Metals | The Stainless Steel Innovators | 9 th Edition | www.midwaymetals.com.au
WELDED SQUARE & RECTANGLE TUBE SPECIFICATIONS:
ASTM A554
LENGTH:
6 METRES
FINISH:
POLISHED 180 HAIRLINE POLISHED 400 grit
49
SBP 400
SQUARE TUBE SIZE
T304
mm 12.7 x 12.7 x .9 12.7 x 12.7 x 1.2 19 x 19 x 1.2 19 x 19 x 1.6 22.2 x 22.2 x 1.2 22.2 x 22.2 x 1.6 25.4 x 25.4 x 1.2 25.4 x 25.4 x 1.6 31.8 x 31.8 x 1.2 31.8 x 31.8 x 1.6 38.1 x 38.1 x 1.2 38.1 x 38.1 x 1.6 50.8 x 50.8 x 1.2 50.8 x 50.8 x 1.6
SBP
SBP
T316
✩ ★ ★ ★ ★ ✩ ★ ★ ★ ★ ★ ★ ★ ★
✩ ✩ ★ ✩ ✩ ✩ ★ ✩ ★ ✩ ★ ✩ ★
SIZE
T304
mm 25 x 25 x 2 25 x 25 x 3 32 x 32 x 2 32 x 32 x 3 38 x 38 x 2 38 x 38 x 3 50 x 50 x 2 50 x 50 x 3 60 x 60 x 3 80 x 80 x 2 80 x 80 x 3 80 x 80 x 5 100 x 100 x 3 100 x 100 x 5 150 x 150 x 5
SBP
SBP
400
★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★
✩ ✩ ✩ ✩ ✩ ★ ✩ ★ ✩ ✩ ★ ✩ ★ ★ ✩
✩ ✩ ✩ ✩
400
✩
★ ★ ★ T316
✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩
RECTANGLE TUBE SIZE
T304
mm 38.1 x 25.4 x 1.6 50.8 x 25.4 x 1.2 50.8 x 25.4 x 1.6 80 x 40 x 1.6
SBP
SBP
T316 400
✩ ★ ★ ★
✩ ✩ ★ ✩
✩ ✩
SIZE
T304
mm 50 x 25 x 3 60 x 40 x 3 80 x 40 x 3 100 x 50 x 2 100 x 50 x 3 100 x 50 x 5 150 x 75 x 5 150 x 100 x 5
SBP
SBP
★ ★ ★ ★ ★ ★ ★ ★
★ ★ ★ ✩ ★ ✩ ✩ ✩
T316 400
✩ ✩ ✩ ✩ ✩
Midway Metals | The Stainless Steel Innovators | 9 th Edition | www.midwaymetals.com.au
TUBE PRODUCTS
★
50
TUBE FITTINGS SPECIFICATIONS:
AUSTRALIAN STANDARD 1528 PART 3 - 1975 BENDS CLR 1.50
FINISH:
BENDS OTHERS
TUBE PRODUCTS
SIZE
THICK
UNPOLISHED & POLISHED POLISHED
90° BEND 304
316
45° BEND 304
316
180° BEND 316
EQUAL TEE 304
316
Y PIECE
CAP
CROSS
316
316
316
Inch
mm
mm
1/2
12.7
1.6
★
5/8
15.88
1.6
★
3/4
19.05
1.6
★
★
★
★
★
1
25.4
1.6
★
★
★
★
★
✩
★
✩
1 1/4
31.8
1.6
★
★
★
★
★
✩
★
✩
1 1/2
38.1
1.6
★
★
★
★
★
★
✩
★
★
1 3/4
44.45
1.6
2
50.8
1.6
★
★
★
★
★
★
✩
★
★
2 1/2
63.5
1.6
★
★
✩
★
★
★
★
✩
★
✩
3
76.2
1.6
★
★
✩
★
★
★
★
✩
★
★
3 1/2
88.9
1.6
4
101.6
1.6
★
★
✩
★
★
★
★
✩
★
✩
5
127
1.6
★
★
✩
★
★
★
★
✩
✩
✩
6
152.4
1.6
★
★
✩
★
★
★
★
✩
★
✩
8
203.2
1.6
★
★
✩
✩
✩
★
★
10
254
1.6
✩
✩
✩
✩
✩
✩
12
305
1.6
✩
✩
✩
✩
✩
✩
1
25.4
2
✩
✩
1 1/4
31.8
2
✩
✩
1 1/2
38.1
2
✩
✩
2
50.8
2
✩
✩
2 1/2
63.5
2
✩
✩
3
76.2
2
✩
✩
4
101.6
2
✩
✩
5
127
2
✩
✩
6
152.4
2
★
★
✩
8
203.2
2
★
★
✩
10
254
2
★
★
✩
12
305
2
★
★
✩
★
★
★
Midway Metals | The Stainless Steel Innovators | 9 th Edition | www.midwaymetals.com.au
REDUCINGTUBE FITTINGS AUSTRALIAN STANDARD 1528 PART 3 - 1975
FINISH:
POLISHED
OD mm 19.1 x 12.7 25.4 x 12.7 25.4 x 19.1 31.8 x x 19.1 31.8 x 25.4 38.1 x 12.7 38.1 x 19.1 38.1 x 25.4 38.1 x 31.8 50.8 x 12.7 50.8 x 19.1 50.8 x 25.4 50.8 x 31.8 50.8 x 38.1 63.5 x 19.1 63.5 x 25.4 63.5 x 31.8 63.5 x 38.1 63.5 x 50.8 76.2 x 19.1 76.2 x 25.4 76.2 x 31.8 76.2 x 38.1 76.2 x 50.8 76.2 x 63.5 101.6 x 25.4 101.6x38.1 101.6 x 50.8 101.6 x 63.5 101.6 x 76.2 127 x 50.8 127. x 63.5 127 x 76.2 127 x 101.6 152.4 x 25.4 152.4 x 50.8 152.4 x 63.5 152.4 x 76.2 152.4 x 101.6 152.4 x 127 203.2 x 101.6 203.2 x 127 203.2 x 152.4
TK Inch 3/4 x 1/2 1 x 1/2 1 x 3/4 1 1/4 x 3/4 1 1/4 x 1 1 3/4 x 1/2 1 1/2 x 3/4 1 1/2 x 1 1 1/2 x 1 1/4 2 x 1/2 2 x 3/4 2x1 2 x 1 1/4 2 x 1 1/2 2 1/2 x 3/4 2 1/2 x 1 2 1/2 x 1 1/4 2 1/2 x 1 1/2 2 1/2 x 2 3 x 3/4 3x1 3 x 1 1/4 3 x 1 1/2 3x2 3 x 2 1/2 4x1 4 x 1 1/2 4x2 4 x 2 1/2 4x3 5x2 5 x 2 1/2 5x3 5x4 6x1 6x2 6 x 2 1/2 6x3 6x4 6x5 8x4 8x5 8x6
mm 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6
CONCENTRIC REDUCER
ECCENTRIC REDUCER
REDUCING TEE
★ ★ ★
✩ ✩ ★ ✩ ✩ ✩ ✩ ★ ★ ✩ ★ ★ ★ ★ ✩ ✩ ✩ ★ ★ ✩ ★ ✩ ★ ★ ★ ✩ ✩ ★ ★ ★ ✩ ✩ ✩ ★ ✩ ★ ✩ ★ ★ ✩ ★ ✩ ✩
✩ ★ ★ ✩ ✩ ✩ ✩ ★ ✩ ✩ ★ ★ ✩ ★ ✩ ✩ ✩ ✩ ★ ✩ ★ ✩ ✩ ★ ★ ✩ ✩ ★ ✩ ★ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ★ ✩ ✩ ✩ ✩
★ ✩ ★ ★ ★ ★ ★ ★ ★ ★ ✩ ★ ✩ ★ ★ ✩ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ✩ ✩ ★ ★ ✩ ★ ★ ★ ★ ★ ★ ✩ ★
Midway Metals | The Stainless Steel Innovators | 9 th Edition | www.midwaymetals.com.au
TUBE PRODUCTS
SPECIFICATIONS:
51
52
TECHNICAL DATA TUBE FITTING DIMENSIONS CENTRE-TO-FACE DIMENSIONS OF 45°, 90° &180° TUBE BENDS
TUBE PRODUCTS
NOMINAL SIZE mm 12.7 19.1 25.4 31.8 38.1 50.8 63.5 76.2 101.6 127 152.4 203.2
CENTRE-TO-FACE DIMENSIONS A
B
C
WALL
mm 19.1 28.6 38.1 47.7 57 76.2 95 114.2 152.4 190.5 228.5 304.8
mm 49.1 58.6 68.1 77.7 87 106.2 125 144.2 182.4 230.5 268.5 334.8
mm 30 30 30 30 30 30 30 30 30 40 40 40
mm 1.6 1.6 1.6 / 2 1.6 / 2 1.6 / 2 1.6 / 2 1.6 / 2 1.6 / 2 1.6 / 2 1.6 / 2 1.6 / 2 1.6 / 2
180° BEND
45° BEND
NOTE:
C = The Straight End Extension
CENTRE-TO-FACE DIMENSIONS OF EQUAL TEES NOMINAL SIZE mm 12.7 19.1 25.4 31.8 38.1 50.8 63.5 76.2 101.6 127 152.4 203.2
CENTRE-TO-FACE DIMENSIONS A
B
mm 60 47 57 75 85 115 146 181 228 285 336 345
mm 63 76 89 120 133 178 229 254 292 380 440 500
B
A
EQUAL TEE
DIMENSIONS OF WELDED TYPE ‘Y’ PIECE NOMINAL SIZE mm 25.4 31.8 38.1 50.8 63.5 76.2 101.6 127 152.4
CENTRE-TO-FACE DIMENSIONS A
B
mm 88 110 132 176 220 264 352 359 430
mm 72 90 108 143 179 215 287 440 529
90° BEND
‘Y’ PIECE
Midway Metals | The Stainless Steel Innovators | 9 th Edition | www.midwaymetals.com.au
TECHNICAL DATA TUBE FITTING DIMENSIONS
SIZE mm 19.1 X 12.7 25.4 X 12.7 25.4 X 19.1 31.8 X 19.1 31.8 X 25.4 38.1 X 12.7 38.1 X 19.1 38.1 X 25.4 38.1 X 31.8 50.8 X 12.7 50.8 X 19.1 50.8 X 25.4 50.8 X 31.8 50.8 X 38.1 63.5 X 19.1 63.5 X 25.4 63.5 X 31.8 63.5 X 38.1 63.5 X 50.8 76.2 x 19.1 76.2 X 25.4 76.2 x 31.8 76.2 X 38.1 76.2 X 50.8 76.2 X 63.5 101.6 X 25.4 101.6 X 38.1 101.6 X 50.8 101.6 X 63.5 101.6 X 76.2 127 X 50.8 127. X 63.5 127 X 76.2 127X101.6 152.4 X 25.4 152.4 X 50.8 152.4 X 63.5 152.4 X 76.2 152.4X101.6 152.4X127 203.2 X 101.6 203.2 X 127 203.2 X 152.4
ECCENTRIC REDUCER
TK Inch 3/4 x 1/2 1 x 1/2 1 x 3/4 1 1/4 x 3/4 1 1/4 x 1 1 3/4 x 1/2 1 1/2 x 3/4 1 1/2 x 1 1 1/2 x 1 1/4 2 x 1/2 2 x 3/4 2x1 2 x 1 1/4 2 x 1 1/2 2 1/2 x 3/4 2 1/2 x 1 2 1/2 x 1 1/4 2 1/2 x 1 1/2 2 1/2 x 2 3 x 3/4 3x1 3 x 1 1/4 3 x 1 1/2 3x2 3 x 2 1/2 4x1 4 x 1 1/2 4x2 4 x 2 1/2 4x3 5x2 5 x 2 1/2 5x3 5x4 6x1 6x2 6 x 2 1/2 6x3 6x4 6x5 8x4 8x5 8x6
1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6
CONCENTRIC REDUCER A 20 24 25 41 32
B 20 25 26 42 33
38 38 37
REDUCING TEE
ECCENTRIC REDUCER A 26 44
B 27 47
40 40 38
33 48 52 51 39
34 55 57 53 40
51 47 40 50
53 49 41 51
63 50 56 51
70 56 60 53
61 48
63 50
55 66 67
65 70 69
75
80
82
96
73 73 50 106 102 99 82 81 128 103 127 109 153 153 153 153 113 109 205 205 205
75 76 52 113 107 103 80 83 125 105 123 105 165 130 158 135 110 105 183 155 152
76 79 80 105 101
85 83 81 130 115
101 122 128 133 106
103 144 138 141 111
152 152
182 175
115 210 117 205
118 173 120 172
REDUCING TEE A
B
70
89
83 93 100 95 99 108 114 130 107 111 120 125 140 159 138 154 171 188 189
90 120 131 89 90 120 133 178 110 100 120 133 178 229 120 133 178 229 254
218 218
254 292
244 252 385 304 330 348
254 300 380 300 380 440
Midway Metals | The Stainless Steel Innovators | 9 th Edition | www.midwaymetals.com.au
TUBE PRODUCTS
CONCENTRIC REDUCER
53
54
HYGIENIC FITTINGS SPECIFICATIONS:
BSM/RJT Fittings to AS1528, Part 4 - 1976
TUBE PRODUCTS
BSM/RJT FITTINGS
SIZE mm
ROUND SLOTTED NUT
HEX. NUT
PLAIN LINER
MALE PART
O-RING EPDM
O-RING TEFLON
O-RING VITON
CIP SEAL
BLANK CAP
BLANK NUT
ALUM. SPANNER
25.4 38.1 50.8 63.5 76.2 101.6 127.0 152.4
★ ★ ★ ★ ★ ★ ✩ ✩
★ ★ ★ ★ ★ ★ ★ ★
★ ★ ★ ★ ★ ★ ★ ★
★ ★ ★ ★ ★ ★ ★ ★
★ ★ ★ ★ ★ ★ ★ ★
✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩
★ ★ ★ ★ ★ ★ ★ ★
★ ★ ★ ★ ★ ★ ★ ★
★ ★ ★ ★ ★ ★ ★ ★
✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩
★ ★ ★ ★ ★ ★ ★ ★
TUBE CLAMPS
HYGIENIC FLAT FACE FITTINGS
SIZE mm
HEX. NUT
FLAT FACE LINER
MALE PART LIP REMOVED
SEAL EPDM
SEAL TEFLON
SIZE mm
PLAIN
BOSSED
LONGTANG
12.7 19.05 25.4 38.1 50.8 63.5 76.2 101.6 127.0 152.4
★ ★ ★ ★ ★ ★ ★ ★ ✩ ★
★ ★ ★ ★ ★ ★ ★ ★ ✩ ★
★ ★ ★ ★ ★ ★ ★ ★ ✩ ★
★ ★ ★ ★ ★ ★ ★ ★ ✩ ★
✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩
19.05 25.4 31.8 38.1 50.8 63.5 76.2 101.6 127.0 152.4
★ ★ ★ ★ ★ ★ ★ ★ ✩ ★
★ ★ ★ ★ ★ ★ ★ ★ ✩ ★
★ ★ ★ ★ ★ ★ ★ ✩ ★
SPECIFICATIONS:
Triclover Fittings to AS1528, Part 2 - 1976
TRICLOVER FITTINGS
SIZE mm
CLAMP BODY
FERRULE LONG
BLANK CAP
SEAL EPDM
SEAL BUNA
SEAL TEFLON
SEAL VITON
19.05 25.4 38.1 50.8 63.5 76.2 101.6 127.0 152.4
★ ★ ★ ★ ★ ★ ★ ✩ ★
★ ★ ★ ★ ★ ★ ★ ✩ ★
★ ★ ★ ★ ★ ★ ★ ✩ ★
★ ★ ★ ★ ★ ★ ★ ✩ ★
✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩
✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩
✩ ★ ★ ★ ★ ★ ★ ✩ ★
Midway Metals | The Stainless Steel Innovators | 9 th Edition | www.midwaymetals.com.au
TECHNICAL DATA HYGIENIC FITTINGS
55
HEXAGONAL NUT SIZE mm
A
B
C
25.4 38.1 50.8 63.5 76.2 101.6 127.0 152.4
42.266 x 8TPI WHIT 54.966 x 8TPI WHIT 67.920 x 6TPI WHIT 80.620 x 6TPI WHIT 93.320 x 6TPI WHIT 118.720 x 6TPI WHIT 144.000 x 6TPI WHIT 169.520 x 6TPI WHIT
33.45 46.0 58.67 71.4 84.1 109.7 134.9 163.0
22.2 22.2 22.2 22.2 22.2 22.2 22.2 22.2
SIZE mm
A
B
C
D
E
25.4 38.1 50.8 63.5 76.2 101.6 127.0 152.4
22.2 34.9 47.6 60.3 73.0 97.6 123.8 148.0
25.65 38.35 51.05 63.75 76.45 101.85 127.00 152.50
32.5 45.2 57.9 70.6 83.3 108.7 134.0 161.8
41.3 54.0 66.7 79.4 92.1 117.5 142.9 169.1
19.5 19.5 19.5 19.5 19.5 19.5 23.5 23.5
TUBE PRODUCTS
PLAIN LINER
MALE PART SIZE mm
A
B
C
D
25.4 38.1 50.8 63.5 76.2 101.6 127.0 152.4
22.2 34.9 47.6 60.3 73.0 97.6 123.8 148.0
25.65 38.35 51.05 63.75 76.45 101.85 127.00 152.50
45.72 x 8TPI WHIT 58.42 x 8TPI WHIT 72.72 x 6TPI WHIT 85.42 x 6TPI WHIT 98.12 x 6TPI WHIT 123.52 x 6TPI WHIT 148.30 x 6TPI WHIT 174.32 x 6TPI WHIT
27 27 27 27 27 27 24 24
O-RING (EPDM,TEFLON, VITON) SIZE mm
A
B
C
25.4 38.1 50.8 63.5 76.2 101.6 127.0 152.4
33.3 46.0 58.7 71.4 84.1 109.5 134.9 162.6
6.6 6.6 6.6 6.6 6.6 6.6 6.6 6.6
3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2
C.I.P NZ
Flat Face
O Ring
Midway Metals | The Stainless Steel Innovators | 9 th Edition | www.midwaymetals.com.au
56
TECHNICAL DATA HYGIENIC FITTINGS ROUND SLOTTED NUT SIZE mm
A
B
C
SLOTS
25.4 38.1 50.8 63.5 76.2 101.6 152.4
42.266 x 8TPI WHIT 54.966 x 8TPI WHIT 67.920 x 6TPI WHIT 80.620 x 6TPI WHIT 93.320 x 6TPI WHIT 119.000 x 6TPI WHIT 169.520 x 6TPI WHIT
58.5 74.0 85.5 98.5 111.6 138.0 197.0
33.45 46.0 58.67 71.4 84.1 109.7 163.0
4 4 6 6 8 8 10
TUBE PRODUCTS
HEXAGONAL BLANK NUT SIZE mm
A
B
C
25.4 38.1 50.8 63.5 76.2 101.6
42.266 x 8TPI WHIT 54.966 x 8TPI WHIT 67.920 x 6TPI WHIT 80.620 x 6TPI WHIT 93.320 x 6TPI WHIT 118.720 x 6TPI WHIT
22.2 22.2 22.2 22.2 22.2 22.2
4 4 4 4 4 4
FLAT FACE LINER SIZE mm
A
B
C
D
25.4 38.1 50.8 63.5 76.2 101.6
22.2 34.9 47.6 60.3 73.0 97.6
41.3 54.0 66.7 79.4 92.1 117.5
25.8 38.5 51.2 63.9 76.6 102.2
32.5 45.2 57.9 70.6 83.3 108.7
MALE PART (LIP REMOVED) SIZE mm
A
B
C
25.4 38.1 50.8 63.5 76.2 101.6
22.2 34.9 47.6 60.3 73.0 97.6
25.65 38.35 51.05 63.75 76.45 101.85
45.72 x 8T WHIT 58.42 x 8T WHIT 72.72 x 6T WHIT 85.42 x 6T WHIT 98.12 x 6T WHIT 123.52 x 6T WHIT
Midway Metals | The Stainless Steel Innovators | 9 th Edition | www.midwaymetals.com.au
TECHNICAL DATA TRICLOVER FITTINGS
57
CLAMP HEAVY DUTY SIZE mm
A
B
12.7 - 19.05 38.1 50.8 63.5 76.2 101.6 152.4
20 43.6 57 70.6 84 112 155
28 53.6 67 80.6 94 122 170
SIZE mm
A
B
C
D
12.7 19.05 25.4 38.1 50.8 63.5 76.2 101.6 152.4
9.45 15.75 22.2 34.9 47.6 60.3 73.0 97.6 146.8
12.75 19.05 25.4 38.1 50.8 63.5 76.2 101.6 152.5
25.2 25.2 50.5 50.5 64.0 77.5 91.0 119.0 166.8
28.6 28.6 28.6 28.6 28.6 28.6 28.6 28.6 28.6
1/2’’ ~ 3/4”
1’’ ~ 6”
FLANGE SEAL SIZE mm
A
B
25.4 38.1 50.8 63.5 76.2 101.6
22.8 35.8 48.8 60.5 73.1 97.8
52.7 52.7 66.2 79.7 93.2 121.2
BLANK CAP SIZE mm
A
B
12.7 - 19.05 25.4 - 38.1’’ 50.8 63.5 76.2 101.6 152.4
25.2 50.5 64.0 77.5 91.0 119.0 166.7
5.0 6.3 6.3 6.3 6.3 7.9 11.1
STANDARD SEAL SIZE mm
A
B
12.7 19.05 25.4 38.1 50.8 63.5 76.2 101.6
21.8 21.8 50.0 50.0 63.5 76.2 88.9 118.0
9.9 16.3 22.7 35.9 48.6 61.3 74.0 98.6
Midway Metals | The Stainless Steel Innovators | 9 th Edition | www.midwaymetals.com.au
TUBE PRODUCTS
FERRULE LONG
VALVES & EQUIPMENT
TUBE PRODUCTS
58
NOTE:
BUTTERFLY VALVES
BALL VALVES
PLUG VALVES
CHECK VALVES
SIGHT GLASSES
SPRAY BALLS
SAMPLING VALVES
LEVEL GAUGES
SHUT OFF & DIVERT VALVES
FILTERS & STRAINERS
PRESSURE RELIEF VALVES
TANK VENTS
A comprehensive hygienic valves and equipment catalogue is available upon request.
Midway Metals | The Stainless Steel Innovators | 9 th Edition | www.midwaymetals.com.au
PLATE FLANGES
59
SPECIFICATIONS:
AS2129 TABLE FLANGES
TYPE:
SLIP-ON WELD BLIND
CLASS:
TABLE D, E, F & H
SOW BL
GRADE
SIZE I.D mm
304L
316L
NOTE:
BLIND
TABLE D SLIP-ON
TABLE E
BLIND
TABLE F
TABLE H
SLIP-ON
BLIND
SLIP-ON
BLIND
SLIP-ON
BLIND
12.7
★
★
✩
✩
✩
✩
19.05
★
★
✩
✩
✩
✩
25.4
★
★
✩
✩
✩
✩
31.8
★
★
✩
✩
✩
✩
38.1
★
★
★
★
✩
✩
✩
✩
50.8
★
★
★
★
✩
✩
✩
✩
63.5
★
★
★
★
✩
✩
✩
✩
76.2
★
★
★
★
✩
✩
✩
✩
101.6
★
★
★
★
✩
✩
✩
✩
127
★
★
★
★
✩
✩
152.4
★
★
★
★
✩
✩
✩
✩
203.2
★
★
★
★
✩
✩
✩
✩
254
★
★
★
★
✩
✩
✩
✩
304.8
★
★
★
★
✩
✩
✩
✩
12.7
★
★
✩
✩
✩
✩
19.05
★
★
✩
✩
✩
✩
25.4
★
★
✩
✩
✩
✩
31.8
★
★
✩
✩
✩
✩
38.1
★
★
★
★
✩
✩
✩
✩
50.8
★
★
★
★
✩
✩
✩
✩
63.5
★
★
★
★
✩
✩
✩
✩
76.2
★
★
★
★
✩
✩
✩
✩
101.6
★
★
★
★
✩
✩
✩
✩
127
★
★
★
★
✩
✩
152.4
★
★
★
★
✩
✩
✩
✩
203.2
★
★
★
★
✩
✩
✩
✩
254
★
★
★
★
✩
✩
✩
✩
304.8
★
★
★
★
✩
✩
✩
✩
Plate Flanges above 300mm are made to manufacture. Non Standard Flanges are our speciality.
Midway Metals | The Stainless Steel Innovators | 9 th Edition | www.midwaymetals.com.au
TUBE PRODUCTS
SLIP-ON
60
TECHNICAL DATA PLATE FLANGE DIMENSIONS
SLIP-ON
BLIND
TUBE PRODUCTS
TABLE D SIZE
SLIP ON BORE
OUTER DIA.
THICKNESS
BOLT CIRCLE DIA.
# OF HOLES
DIA. OF HOLES
mm 12.7 19.05 25.4 31.8 38.1 50.8 63.5 76.2 88.9 101.6 127 152.4 203.2 254 304.8 355.6 381 406.4 457.2 508 558.8 609.6 711.2 762 812.8 863.6 914.4
SOW 13.7 20.1 26.4 32.8 39.3 52 64.5 77.5 90.4 103 128.5 154 204.5 256 306.5 358 384 409 460 510.5 561 612 714 764.5 815.5 866 917.5
OD 95 100 115 120 135 150 165 185 205 215 255 280 335 405 455 525 550 580 640 705 760 825 910 995 1060 1090 1175
TK 5 5 5 6 6 8 8 10 10 10 13 13 13 16 19 22 22 22 25 29 29 32 38 38 38 50 50
PCD 67 73 83 87 98 114 127 146 165 178 210 235 292 356 406 470 495 521 584 641 699 756 845 927 984 1016 1092
4 4 4 4 4 4 4 4 4 4 8 8 8 8 12 12 12 12 12 16 16 16 20 20 20 20 24
14 14 14 14 14 18 18 18 18 18 18 18 18 22 22 26 26 26 26 26 30 30 30 33 36 36 36
SIZE
SLIP ON BORE
OUTER DIA.
THICKNESS
BOLT CIRCLE DIA.
# OF HOLES
DIA. OF HOLES
mm 12.7 19.05 25.4 31.8 38.1 50.8 63.5 76.2 88.9 101.6 127 152.4 203.2 254 304.8 355.6 381 406.4 457.2 508 558.8 609.6 711.2 762 812.8 863.6 914.4
SOW 13.7 20.1 26.4 32.8 39.3 52 64.5 77.5 90.4 103 128.5 154 204.5 256 306.5 358 384 409 460 510.5 561 612 714 764.5 815.5 866 917.5
OD 95 100 115 120 135 150 165 185 205 215 255 280 335 405 455 525 550 580 640 705 760 825 910 995 1060 1090 1175
TK 6 6 7 8 9 10 10 11 13 13 14 17 19 22 25 29 32 32 35 38 44 48 54 54 54 57 64
PCD 67 73 83 87 98 114 127 146 165 178 210 235 292 356 406 470 495 521 584 641 699 756 845 927 984 1016 1092
4 4 4 4 4 4 4 4 8 8 8 8 8 12 12 12 12 12 16 16 16 16 20 20 20 20 24
14 14 14 14 14 18 18 18 18 18 18 22 22 22 26 26 26 26 26 26 30 33 33 36 36 36 36
TABLE E
Midway Metals | The Stainless Steel Innovators | 9 th Edition | www.midwaymetals.com.au
SEAMLESSTUBE SPECIFICATIONS:
ASTM A269 ASTM A213 (ON REQUEST)
LENGTHS:
FIXED 6 METRES
FINISH:
ANNEALED & PICKLED BRIGHT ANNEALED
SIZE mm
TP304
TP316
0.7
✩
★
6.35
0.9
✩
★
6.35
1.2
✩
★
6.35
1.6
✩
★
7.94
0.9
✩
★
7.94
1.2
✩
✩
7.94
1.6
✩
★
9.53
0.9
✩
★
9.53
1.2
✩
★
9.53
1.6
✩
★
12.7
0.9
✩
★
12.7
1.2
✩
★
12.7
1.6
✩
★
15.88
1.2
✩
✩
15.88
1.6
✩
★
19.05
1.2
✩
✩
19.05
1.6
✩
★
25.4
1.2
✩
✩
25.4
1.6
✩
★
25.4
2
✩
✩
31.8
1.6
✩
★
31.8
2
✩
✩
38.1
1.6
✩
★
38.1
2
✩
✩
50.8
1.6
✩
★
50.8
2
✩
✩
OD
WT
3.18
Midway Metals | The Stainless Steel Innovators | 9 th Edition | www.midwaymetals.com.au
TUBE PRODUCTS
61
62
SEAMLESS/WELDEDTUBE TECHNICAL DATA APPROXIMATE MASS & THEORETICAL BURSTING PRESSURE FOR SEAMLESS & WELDED TUBE (WELDED REFER NOTES)
TUBE PRODUCTS
WT
mm SWG
OD mm
Inch
3.18
1/8
4.76
3/16
6.35
1/4
7.94
5/16
9.53
3/8
12.70
1/2
15.88
5/8
19.05
3/4
22.23
7/8
25.40
1
28.58
11/8
31.75
11/4
38.10
11/2
44.45
13/4
50.80
2
63.50
21/2
76.20
3
88.90
31/2
101.60
4
127.00
5
152.40
6
203.20
8
0.45
0.51
0.61
0.71
0.91
1.22
1.63
2.03
2.64
3.25
26
25
23
22
20
18
16
14
12
10
0.030
0.034
0.039
0.043
0.051
145.8
165.2
197.6
230.0
294.7
0.048
0.053
0.062
0.071
0.086
1.266
97.4
440.4
132.0
153.6
196.9
0.065
0.073
0.086
0.099
0.122
73.0
82.7
98.9
115.2
146.6
197.9
264.4
0.083
0.093
0.110
0.127
0.158
0.202
0.254
58.4
66.2
79.1
92.1
118.0
158.3
211.4
0.101
0.113
0.134
0.154
0.193
0.250
0.138
48.6
55.1
65.9
76.7
98.4
131.9
176.2
0.136
0.153
0.182
0.210
0.265
0.345
0.445
36.5
41.4
49.5
57.6
73.8
98.9
132.2
164.6
0.193
0.230
0.266
0.336
0.441
0.573
0.693
0.534
33.1
39.6
46.1
59.0
79.1
105.7
131.7
0.233
0.277
0.321
0.407
0.536
0.700
0.852
1.068
27.6
33.0
38.4
49.2
66.0
88.1
109.8
142.7
175.7
0.273
0.325
0.377
0.478
0.632
0.828
1.011
1.275
1.521
23.6
28.3
32.9
42.2
56.5
75.5
94.1
122.3
150.6
0.313
0.373
0.432
0.550
0.727
0.955
1.170
1.482
1.775
20.7
24.7
28.8
36.9
49.5
66.1
82.3
107.1
131.8
0.488
0.621
0.823
1.083
1.329
1.689
2.030
25.6
32.8
44.0
58.7
73.2
95.1
117.1
0.543
0.692
0.919
1.211
1.488
1.895
2.284
23.0
29.5
36.6
52.9
65.9
85.6
105.4
0.835
1.110
1.466
1.806
2.309
2.793
24.6
33.0
44.1
54.9
71.4
87.9
0.977
1.301
1.721
2.124
2.722
3.302
21.1
28.3
37.8
47.0
61.2
75.3
1.120
1.492
1.976
2.441
3.135
3.811
18.5
24.7
33.0
41.2
53.5
65.9
1.874
2.487
3.077
3.962
4.829
19.8
26.4
32.9
42.8
52.7
2.256
2.997
3.713
4.789
5.847
16.5
22.0
27.5
35.7
43.9
3.508
4.349
5.616
6.864
18.9
23.5
30.6
37.7
4.018
4.984
6.443
7.882
16.5
20.6
26.8
32.9
5.039
6.256
8.096
9.918
13.2
16.5
21.4
26.4
6.060
7.527
9.750
11.954
11.0
13.7
17.8
22.0
8.102
10.071
13.057
16.025
8.3
10.3
13.4
16.5
1
Figures shown in bold are the Theoretical Weight of the tube, calculated using the nominal outside diameter and wall thickness as in the formula: w = C (d-t)t. Where W = Weight (kg/m), C = 0.02466 d = Specified OD (millimetres) t = Specified WT (millimetres)
2
Figures shown in italics are the Theoretical Bursting Pressure of Grade 316, 304 and 321 seamless tube, calculated using Barlow’s thin wall formula and where S = 515 MPa: P = 2st D
Where: P = Theoretical Bursting Pressure (MPa) S = Tensile Strength (MPa) t = Wall thickness (millimetres) D = Outside diameter (millimetres) For Theoretical Bursting Pressure of Grades 316, 304 and 321 welded tube, multiply the figures shown in the table by 0.85 (Weld Joint Efficiency). For Theoretical Bursting Pressure of Grades 316L and 304L seamless tube S = 485 MPa, multiply the figure shown in the table by 0.9417. For Theoretical Bursting Pressure of Grades 316L and 304L welded tube, multiply the figures shown in the table by 0.8005 (S = 485 MPa x 0.85 Weld Joint Efficiency). This Table is a guide only and should not be used to determine availability of products. Call your supplier or ASSDA to determine availability.
Midway Metals | The Stainless Steel Innovators | 9 th Edition | www.midwaymetals.com.au
COMPRESSION FITTINGS
63
TUBE TO SAE/MS O-RING
TUBE TO TUBE UNION
UNION CUA
REDUCING UNION CUR
UNION ELBOW CLA
UNION TEE CTA
UNION CROSS CXA
BULKHEAD UNION CBU
SAE/MS MALE CONNECTOR CSC
SAE/MS MALE ELBOW CSLA
SAE/MS MALE RUN TEE CSRT
SAE/MS MALE BRANCH TEE CSBT
SAE/MS 45ºMALE ELBOW CSLB
O-SEAL STRAIGHT THREAD CONNECTOR COS
TUBE TO MALE PIPE O-SEAL PIPE THREAD CONNECTOR COP TERMOCOUPLE CONNECTOR CMCT
MALE CONNECTOR FOR METAL GASKET SEAL COM
BULKHEAD MALE CONNECTOR CBMC
45ºMALE 45º 5 MALE ELBOW CLMA
MALE RUN TEE CRTM
MALE CONNECTOR FOR BONDED WASHER SEAL GMC-G
MALE ELBOW CLMA
TUBE TO WELD END
MALE PIPE WELD CONNECTOR CWC
MALE PIPE WELD ELBOW CLW
TUBE SOCKET WELD CONNECTOR CSWC
MALE BRANCH TEE CBTM TUBE SOCKET WELD ELBOW CLSW
TUBE TO FEMALE PIPE PLUG & CAP FEMALE CONNECTOR CFC
GAUGE CONNECTOR CGC
BULKHEAD FEMALE CONNECTOR CBFC PLUG CPA
CAP CCA
TUBE TO TUBE UNION FEMALE ELBOW CLF
FEMALE RUN TEE CRTF
FEMALE LE BRANCH TEE CBTF C
STUB TUBE CONNECTOR
REDUCER CR
FEMALE ADAPTOR CAF
BULKHEAD REDUCER CBR
PORT CONNECTOR CPC
TUBE INSERT CI
SURE RING CCL
GAP GAUGE CIG
NUT CN
FRONT FERRULE CFF
BACK FERRULE CFB
FERRULE SET CFS
PRESWAGING TOOL EZY-MAT
MALE ADAPTER CAM
REDUCING PORT CONNECTOR CPR
FLANGE LAPPED TUBE CONNECTOR CFTC
TUBE TO AN TUBE
AN UNION CFU
AN BULKHEAD UNION CUR
AN ADAPTER CFA
Midway Metals | The Stainless Steel Innovators | 9 th Edition | www.midwaymetals.com.au
TUBE PRODUCTS
MALE CONNECTOR CMC
64
AUXILIARYTUBE FITTINGS ADJUSTABLE FEET & INSERTS (5/8” BSW THREAD)
STAINLESS STEEL ADJUSTABLE FOOT BASE SIZE
304
TUBE SIZE
304
316
32mm 50mm 65mm
★ ★ ★
1/2” 3/4” 1” 1 1/4” 1 1/2” 2” 2 1/2” 3” 4”
★ ★ ★ ★ ★ ★ ✩ ✩ ✩
★ ★ ★ ★ ★ ★ ★ ★ ★
SQUARE TUBE NYLON INSERTS
TUBE PRODUCTS
STAINLESS STEEL CONCEALED FLANGES
BASE SIZE
304
25mm 32mm 38mm
★ ★ ★
SIDE VIEW
TOP VIEW
T316 SOLID PUSH-IN CAPS STAINLESS STEEL TUBE SADDLES SIZE
304
1/4” 3/8” 1/2” 3/4” 1” 1 1/4” 1 1/2” 2”
★ ★ ★ ★ ★ ★ ★ ★
TO SUIT O.D
316
38.1mm 50.8mm
★ ★
FACE RINGS SPECIFICATIONS:
FLAT FACE RINGS
SPECIFICATIONS:
ANGLE NECK FACE RINGS
MANUFACTURE:
FLAT FACE MANUFACTURED FROM SHEET
MANUFACTURE:
ANGLE NECK MANUFACTURED FROM ANGLE
FLAT FACE RINGS INSIDE DIAMETER mm 38.1 50.8 63.5 76.2
ANGLE NECK RINGS
MATERIAL
GRADE 316
3mm Thick 3 mm Thick 3 mm Thick 3mm Thick
★ ★ ★ ✩
INSIDE DIAMETER mm 50.8 63.5 76.2 101.6 152.4 203 254 305 356 406 457 508
MATERIAL
GRADE 316
PRESSED PRESSED 20 x 20 x 3 20 x 20 x 3 25 x 25 x 3 25 x 25 x 3 30 x 30 x 4 30 x 30 x 4 40 x 40 x 5 40 x 40 x 5 40 x 40 x 5 40 x 40 x 5
★ ★ ★ ★ ★ ★ ★ ★ ✩ ✩ ✩ ✩
Midway Metals | The Stainless Steel Innovators | 9 th Edition | www.midwaymetals.com.au
EXPANSION FLANGES
65
SILICONE SEALANT BETWEEN EXPANSION FLANGE & WALL WALL, CEILING OR FLOOR
SCREW FIXING HOLES
OUTER FLANGE
‘O’ RING
INNER FLANGE
‘O’ RING
INNER FLANGE
OUTER FLANGE
SCREW FIXING HOLES
SIZE
304
3/4”
★
1”
★
1 1/2”
★
2”
★
2 1/2”
★
3”
★
4”
★
6”
★
•
Provides a hygenic seal for wall, floor and ceiling penetrations of process piping in food and beverage plants
•
Allows lineal expansion and contraction of pipework without permitting the entry of water, dust, vapours or insects
•
Can be adapted for steam pipes or non-standard tube sizes
•
Suitable for cip hosedowns
•
Eliminate potential health hazards
•
Minimises damage during refurbishment
•
Professional finish
Midway Metals | The Stainless Steel Innovators | 9 th Edition | www.midwaymetals.com.au
TUBE PRODUCTS
OD TUBE
66
HD A-JUSTA-FOOT™ There are two types of HEAVY DUTY A-JUSTA-FOOTTM. In both types the whole unit is made in STAINLESS STEEL. The HD range is ball jointed and has 50 degree angle adjustment.
Both the HD and HDA ranges have anti-slip pads, and are available with BOLTDOWN holes in the base. They can both be adjusted in position under the machine and have high load ratings.
The HDA range has a swivelling stud which is totally captive in the base, it has 10 degree angle adjustment and is ideal where there is a requirement to resist and upward force.
To compliment the feet there is a range of Threaded Tube Ends, in round and square, which are designed to be welded into the tube.
HD = HEAVY DUTY A-JUSTA-FOOTTM 121 SERIES (STAINLESS STEEL) COMPLETE WITH ANTI SLIP PADS MIDWAY CODES
TUBE PRODUCTS
TFAJFHD1260090 TFAJFHD1660090 TFAJFHD1660190
TFAJFHD1690090
PART NO.
SIZE
A
B
C
D
E
RATING
121/40/M8/60 121/40/M10/60 121/60/M12/90 121/60/M12/190 121/60/M16/90 121/60/M16/190 121/60/M20/90 121/60/M20/190 121/60/M24/90 121/60/M24/190 121/90/M12/90 121/90/M12/190 121/90/M16/90 121/90/M16/190 121/90/M20/90 121/90/M20/190 121/90/M24/90 121/90/M24/190 121/125/M12/90 121/125/M16/90 121/125/M16/190 121/125/M20/90 121/125/M20/190 121/125/M24/90 121/125/M24/190
40xM8 40xM10 60xM12 60xM12x190 60xM16 60xM16x190 60xM20 60xM20x190 60xM24 60xM24x190 90xM12 90xM12x190 90xM16 90xM16x190 90xM20 90xM20x190 90xM24 90xM24x190 125xM12 125xM16 125xM16x190 125xM20 125xM20x190 125xM24 125xM24x90
40 40 60 60 60 60 60 60 60 60 90 90 90 90 90 90 90 90 125 125 125 125 125 125 125
60 60 90 190 90 190 90 190 90 190 90 190 90 190 90 190 90 190 90 90 190 90 190 90 190
30 30 40 40 40 40 40 40 40 40 48 48 48 48 48 48 48 48 45 45 45 45 45 45 45
18 18 17 17 17 17 17 17 17 17 19 19 19 19 19 19 19 19 22 22 22 22 22 22 22
M8 M10 M12 M12 M16 M16 M20 M20 M24 M24 M12 M12 M16 M16 M20 M20 M24 M24 M12 M16 M16 M20 M20 M24 M24
500kg 700kg 1200kg 1200kg 2000kg 2000kg 3500kg 3500kg 4500kg 4500kg 1200kg 1200kg 2000kg 2000kg 3500kg 3500kg 4500kg 4500kg 1200kg 2000kg 2000kg 3500kg 3500kg 4500kg 4500kg
HDA STANDARD 221 SERIES A BASE HDA221/90/M16/70 HDA221/90/M16/170 HDA221/90/M20/70 HDA221/90/M20/170 HDA221/90/M24/70 HDA221/90/M24/170
90 90 90 90 90 90
B
C
BASE HEIGHT 45 45 45 45 45 45
OVERALL HEIGHT 115 215 115 215 115 215
D STUD M16 M16 M20 M20 M24 M24
E
F
THREAD LENGTH 70 170 70 170 70 170
PIVOT ANGLE 10 deg 10 deg 10 deg 10 deg 10 deg 10 deg
G RATING 2000kg 2000kg 3000kg 3000kg 4000kg 4000kg
The A-JUSTA-FOOTTM is a multi-adjustable pedestal foot, ideal for industrial, commercial, workshop or food industry applications. The special insert in the base helps to absorb vibration and means your machinery will stay exactly where you put it. A-JUSTA-FOOTTM is avaliable in a large variety of sizes. Special requirements can often be produced.
Midway Metals | The Stainless Steel Innovators | 9 th Edition | www.midwaymetals.com.au
A-JUSTA-FOOT™
67
BALL JOINTED A-JUSTA-FOOTTM (STAINLESS STEEL) 21 SERIES MIDWAY CODES
PART NO.
SIZE
A
B
C
D
E
RATING
TFAJFBJ0840080 TFAJFBJ1040060 TFAJFBJ1260065 TFAJFBJ1660065 TFAJFBJ1290065 TFAJFBJ1690065 TFAJFBJ1660165 TFAJFBJ1690165
21/40/M8/80 21/40/M10/60 21/60/M12/65 21/60/M16/65 21/90/M12/65 21/90/M16/65 21/60/M16/165 21/90/M16/165 21/60/M20/165 21/60/M20/165 21/90/M20/100 21/90/M20/165
40xM8 40xM10 60xM12 60xM16 90xM12 90xM16 60xM16 90xM16 60xM20 60xM20 90xM20 90xM20
40 40 60 60 90 90 60 90 60 60 90 90
80 60 65 65 65 65 165 165 100 165 100 165
33 33 51 51 51 51 51 51 51 51 51 51
20 20 25 25 25 25 25 25 25 25 25 25
M8 M10 M12 M16 M12 M16 M16 M16 M20 M20 M20 M20
350kg 500kg 800kg 1000kg 800kg 1000kg 1000kg 1000kg 1000kg 1000kg 1000kg 1000kg SLIP-ON
A-JUSTA-FOOTTM is avaliable in other stud lengths (B) as required
TUBE PRODUCTS
TFAJFBJ2090165
BOLT DOWN A-JUSTA-FOOTTM (STAINLESS STEEL) 31 SERIES MIDWAY CODES
PART NO.
SIZE
A
B
C
D
E
RATING
TFAJFBD0840080 TFAJFBD1400060 TFAJFBD1260065 TFAJFBD1660065 TFAJFBD1660165
31/40/M8/80* 31/40/M10/60* 31/60/M12/65 31/60/M16/65 31/60/M16/165 31/60/M20/100 31/60/M20/165 31/90/M12/65 31/90/M16/65 31/90/M16/165 31/90/M20/100 31/90/M20/165
40xM8 40xM10 60xM12 60xM16 60xM16 60xM20 60xM20 90xM12 90xM16 90xM16 90xM20 90xM20
60 60 80 80 80 80 80 60 60 60 60 60
80 60 65 65 165 100 165 65 65 165 100 165
33 33 51 51 51 51 51 51 51 51 51 51
20 20 23 23 23 23 23 25 25 25 25 25
M8 M10 M12 M16 M16 M20 M20 M12 M16 M16 M20 M20
350kg 500kg 800kg 1000kg 1000kg 1000kg 1000kg 800kg 1000kg 1000kg 1000kg 1000kg
TFAJFBD2060165 TFAJFBD1690065 TFAJFBD1690165
A-JUSTA-FOOTTM is avaliable in other stud lengths (B) as required * Denotes also avaliable with single hole flange
31 SERIES
FIXED A-JUSTA-FOOTTM (STAINLESS STEEL) 41 SERIES MIDWAY CODES
PART NO.
SIZE
A
B
D
E
RATING
TFAJFFX084035 TFAJFFX104035
41/40/M8/35 41/40/M10/35 41/60/M12/60
40xM8 40xM10 60xM12
40 40 60
35 35 60
20 20 25
M8 M10 M12
350kg 500kg 800kg
41 SERIES
Midway Metals | The Stainless Steel Innovators | 9 th Edition | www.midwaymetals.com.au
68
A-JUSTA-FOOT™
SQUARE THREADED TUBE END (STAINLESS STEEL) 11 SERIES (G) IS RECOMMENDED ID TUBE SIZE MIDWAY CODES
TUBE PRODUCTS
TFAJFSTI0825 TFAJFSTI1025 TFAJFSTI1225 TFAJFSTI1625
TFAJFSTI0832 TFAJFSTI1032 TFAJFSTI1232 TFAJFSTI1632
TFAJFSTI1635 TFAJFSTI0838 TFAJFSTI1038 TFAJFSTI1238 TFAJFSTI1638
TFAJFSTI1050 TFAJFSTI1250 TFAJFSTI1650
SQUARE THREADED TUBE END + SQUARE PLUG
PART NO.
SIZE
A
B
C
D
E
F
G
RATING
11/9/M8 11/25M8 11/25/M10 11/25/M12 11/25/M16 11/30/M8 11/30/M10 11/30/M12 11/30/M16 11/32/M8 11/32/M10 11/32/M12 11/32/M16 11/35/M8 11/35/M10 11/35/M12 11/35/M16 11/38/M8 11/38/M10 11/38/M12 11/38/M16 11/40/M10 11/40/M12 11/40/M16 11/51/M10 11/51/M12 11/51/M16 11/51/M20
19xM8 25xM8 25xM10 25xM12 25xM16 30xM8 30xM10 30xM12 30xM16 32xM8 32xM10 32xM12 32xM16 35xM8 35xM10 35xM12 35xM16 38xM8 38xM10 38xM12 38xM16 40xM10 40xM12 40xM16 51xM10 51xM12 51xM16 51xM20
19 25 25 25 25 30 30 30 30 32 32 32 32 35 35 35 35 38 38 38 38 40 40 40 51 51 51 51
M8 M8 M10 M12 M16 M8 M10 M12 M16 M8 M10 M12 M16 M8 M10 M12 M16 M8 M10 M12 M16 M10 M12 M16 M10 M12 M16 M20
22.5 39 39 39 39 39 39 39 39 39 39 39 39 39 39 39 39 41 41 41 41 39 39 39 39 39 39 39
24.8 44 44 44 44 45 45 45 45 45 45 45 45 45 45 45 45 45 47 47 47 45 45 45 45 45 45 45
9 10 11 13 16.5 10 11 13 16.5 10 11 13 16.5 11 11 13 16.5 10 17.7 13 18 11 13 16.5 11 13 18 18
16 23.5 23.5 23.5 23.5 26.8 26.8 26.8 26.8 30 30 30 30 32.2 32.2 32.2 32.2 36 36 36 36 36.8 36.8 36.8 48 48 48 48
15-16 22-23 22-23 22-23 22-23 26-27 26-27 26-27 26-27 28-29 28-29 28-29 28-29 31-32 31-32 31-32 31-32 35-36 35-36 35-36 35-36 36-37 36-37 36-37 47-48 47-48 47-48 47-48
50kg 250kg 250kg 250kg 250kg 350kg 350kg 350kg 350kg 350kg 350kg 350kg 350kg 350kg 400kg 400kg 400kg 500kg 500kg 500kg 500kg 500kg 500kg 500kg 750kg 750kg 750kg 750kg
ROUND THREADED TUBE END (STAINLESS STEEL) 81 SERIES MIDWAY CODES
TFAJFRTI1038 TFAJFRTI1238 TFAJFRTI1638
TFAJFRTI1250 TFAJFRTI1650 TFAJFRTI1665
ROUND THREADED TUBE END
PART NO.
SIZE
A
B
C
D
E
F
G
RATING
81/25/M8 81/25/M10 81/25/M12 81/32/M10 81/32/M12 81/32/M16 81/38/M10 81/38/M12 81/38/M16 81/40/M8 81/40/M10 81/40/M12 81/40/M16 81/51/M12 81/51/M16 81/62/M16
25xM8 25xM10 25xM12 32xM10 32xM12 32xM16 38xM10 38xM12 38xM16 40xM8 40xM10 40xM12 40xM16 51xM12 51xM16 62xM16
25 25 25 32 32 32 38 38 38 40 40 40 40 51 51 62
M8 M10 M12 M10 M12 M16 M10 M12 M16 M8 M10 M12 M16 M12 M16 M16
38 38 38 39 39 39 38 38 38 39 39 39 39 38 38 38
46.5 46.5 46.5 45 45 45 45 45 45 45 45 45 45 45 45 45
11 12 14 12 14 18 12 14 18 11 12 14 18 14 18 18
23 23 23 29.5 29.5 29.5 35.5 35.5 35.5 36.8 36.8 36.8 36.8 48 48 60.5
22 22 22 28-29 28-29 28-29 35-36 35-36 35-36 36-37 36-37 36-37 36-37 47-48 47-48 60-61
100kg 100kg 100kg 250kg 250kg 250kg 300kg 300kg 300kg 350kg 500kg 500kg 500kg 450kg 450kg 450kg
Midway Metals | The Stainless Steel Innovators | 9 th Edition | www.midwaymetals.com.au
1 PIECE 800 WOG BALL VALVE -THREADED SPECIFICATIONS:
INVESTMENT CAST BODY & END CAP
END TYPE:
THREADED BSP OR NPT BOTTOM-LOADED, BLOW-OUT-PROOF STEM, ADJUSTABLE STEM PACKING STAINLESS STEEL HANDLE WITH VINYL GRIP
OPTION:
LOCKING DEVICE
APPLICATIONS:
FOR GENERAL CHEMICAL & INDUSTRIAL SERVICES
PRESSURE RATING:
800 PSI WOG (NON-SHOCK)
STEAM RATING:
150 PSI WSP
TEMPERATURE RANGE:
-29°C + 200°C
69
NO.
PART NAME
SPECIFICATION
1
BODY
ASTM A351 GR.CF8M
2
CAP
STAINLESS STEEL 316
3
STEM
STAINLESS STEEL 316
4
BALL
ASTM A351 GR.CF8M
5
BALL SEAT
PTFE
6
THRUST WASHER
PTFE
7
CAP SEAT
PTFE
8
PACKING
PTFE
9
GLAND
STAINLESS STEEL 304
10
WASHER
STAINLESS STEEL 304
11
HANDLE NUT
STAINLESS STEEL 304
12
HANDLE
STAINLESS STEEL 304
13
HANDLE SLEEVE
VINYL GRIP
14*
LOCKING PLATE
STAINLESS STEEL 304
VALVES
MATERIALS LIST
(*) Option
DIMENSIONS (mm) d
L
H
D1
Cv FACTOR
1/4
5
39
36
63
1
3/8
7
44.5
37
74
2.5
1/2
9.2
56.5
44
91
5.5
3/4
12.5
58.5
47
91
10
1
15
71.5
51
106
15.5
1 1/4
20
78.5
54
106
20
1 1/2
25
83.5
67
129
37
2
32
100
72
129
60
Inch
1000 PRESSURE (Psi)
SIZE
PRESSURE TEMPERTURE RATINGS
800 600 400 200 0 -29
-18
38
93
149
204
TEMPERATURE (°C)
Midway Metals | The Stainless Steel Innovators | 9 th Edition | www.midwaymetals.com.au
70
2 PIECE FULL PORT 1000 WOG BALL VALVE -THREADED SPECIFICATIONS:
INVESTMENT CAST BODY & END CAP
END TYPE:
THREADED BSP OR NPT BOTTOM-LOADED, BLOW-OUT-PROOF STEM, ADJUSTABLE STEM PACKING EASY ACTUATOR MOUNTING STAINLESS STEEL HANDLE WITH VINYL GRIP
OPTION:
LOCKING DEVICE
APPLICATIONS:
FOR GENERAL CHEMICAL & INDUSTRIAL SERVICES
PRESSURE RATING:
1000 PSI WOG (NON-SHOCK)
STEAM RATING:
150 PSI WSP
TEMPERATURE RANGE:
-29°C + 200°C
NO.
PART NAME
SPECIFICATION
1 2 3 4 5 6 7 8 9 10 11 12 13 14*
BODY END CAP BALL BALL Seats STEM END SEAL THRUST WASHER STEM PACKINGS GLAND HANDLE HANDLE WASHER HANDLE NUT HANDLE SLEEVE LOCKING PLATE
ASTM A351 GR.CF8M ASTM A351 GR.CF8M ASTM A351 GR.CF8M PTFE S.S.316 PTFE PTFE PTFE STAINLESS STEEL 304 STAINLESS STEEL 304 STAINLESS STEEL 304 STAINLESS STEEL 304 VINYL GRIP STAINLESS STEEL 304
(*) Option
DIMENSIONS (mm)
PRESSURE TEMPERTURE RATINGS
SIZE
d
L
H
D1
W1
W2
h
Cv FACTOR
Inch 1/4 3/8 1/2 3/4 1 1 1/4 1 1/2 2 2 1/2 3
11.0 12.7 15 20 25 32 38 50.8 65 80
59.5 60.5 64 76 90.2 98.8 116 135.5 163 191
50 50 60 63 80 84 96 104 144 156
97 97 126 126 145 145 204 204 248 248
12.7 12.7 12.7 22.4 22.4 25.4 25.4 25.4 N/A N/A
28.5 28.5 28.5 35.0 35.0 38.1 38.1 38.1 58.0 70.0
10-24 UNC 10-24 UNC 10-24 UNC 10-24 UNC 10-24 UNC 1/4-20 UNC 1/4-20 UNC 1/4-20 UNC 1/4-20 UNC 1/4-20 UNC
6 12 19 37 64 103 143 360 440 520
1000 PRESSURE (Psi)
VALVES
MATERIALS LIST
800 600 400 200 0 -29
-18
38
93
149
TEMPERATURE (°C)
Midway Metals | The Stainless Steel Innovators | 9 th Edition | www.midwaymetals.com.au
204
3 PIECE 1000 WOG BALL VALVE -THREADED SPECIFICATIONS:
INVESTMENT CAST BODY & END CAP
END TYPE:
THREADED BSP OR NPT, BUTTWELD, SOCKET WELD 3PC DESIGN FOR FAST INSTALLATION & SIMPLE MAINTENANCE, BOTTOM-LOADED, BLOW-OUT-PROOF STEM, ADJUSTABLE STEM PACKING STAINLESS STEEL HANDLE WITH VINYL GRIP
OPTION:
LOCKING DEVICE
APPLICATIONS:
FOR GENERAL CHEMICAL & INDUSTRIAL SERVICES
PRESSURE RATING:
1000 PSI WOG (NON-SHOCK)
STEAM RATING:
150 PSI WSP
TEMPERATURE RANGE:
-29°C + 200°C
71
NO.
PART NAME
SPECIFICATION
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17
BODY END CAPS BALL STEM BALL SEATS STEM PACKING GLAND END SEALS THRUST WASHER HANDLE HANDLE NUT HANDLE WASHER LOCKING PLATE BOLTS BOLT NUTS BOLT WASHERS HANDLE SLEEVE
ASTM A351 GR.CG8M ASTM A351 GR.CG8M ASTM A351 GR.CG8M STAINLESS STEEL 316 PTFE PTFE STAINLESS STEEL 304 PTFE PTFE STAINLESS STEEL 304 STAINLESS STEEL 304 STAINLESS STEEL 304 STAINLESS STEEL 304 STAINLESS STEEL 304 STAINLESS STEEL 304 STAINLESS STEEL 304 VINYL GRIP
PRESSURE TEMPERTURE RATINGS
SIZE
d
L
H
D1
Cv FACTOR
Inch 1/4 3/8 1/2 3/4 1 1 1/4 1 1/2 2 2 1/2 3 4
11.2 12.7 16 20 25 32 38.1 50.8 65 80 100
65 65 71 85 95 112 123 141 173 192 225
50 50 60 63 80 86 94 104 140 152 180
97 37 126 126 145 145 204 204 248 248 292
6 12 19 37 64 103 143 360 440 520 820
1200 1000 PRESSURE (Psi)
DIMENSIONS (mm)
VALVES
MATERIALS LIST
800 600 400 200 0 -29
-18
38
93
149
204
TEMPERATURE (°C)
Midway Metals | The Stainless Steel Innovators | 9 th Edition | www.midwaymetals.com.au
72
3 WAY REDUCED PORT 1000 WOG BALL VALVE -THREADED ‘L’ PORT SPECIFICATIONS:
INVESTMENT CAST BODY & END CAP
END TYPE:
THREADED BSP OR NPT BOTTOM-LOADED, BLOW-OUT-PROOF STEM, ADJUSTABLE STEM PACKING, REINFORCED PTFE MINIMIZE SEAT DISTORTION, EASY ACTUATOR MOUNTING, STAINLESS STEEL HANDLE WITH VINYL GRIP
OPTION:
LOCKING DEVICE
APPLICATIONS:
FOR GENERAL CHEMICAL & INDUSTRIAL SERVICES
PRESSURE RATING:
1000 PSI WOG (NON-SHOCK)
STEAM RATING:
150 PSI WSP
TEMPERATURE RANGE:
-29°C + 200°C
NO.
PART NAME
SPECIFICATION
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
BODY END CAP BALL BALL SEATS STEM THRUST WASHER STEM PACKINGS END SEAL GLAND HANDLE FLOW INDICATOR PLATE HANDLE WASHER HANDLE NUT LOCKING PLATE HANDLE SLEEVE
ASTM A351 GR.CF8M ASTM A351 GR.CF8M ASTM A351 GR.CF8M REINFORCED PTFE STAINLESS STEEL 316 REINFORCED PTFE REINFORCED PTFE REINFORCED PTFE STAINLESS STEEL 304 STAINLESS STEEL 304 ALUMINIUM STAINLESS STEEL 304 STAINLESS STEEL 304 STAINLESS STEEL 304 VINYL GRIP
DIMENSIONS (mm)
PRESSURE TEMPERTURE RATINGS
SIZE
d
L
H
D1
B
W1
W2
h
Cv FACTOR
Inch 3/8 1/2 3/4 1 1 1/4 1 1/2 2
10.0 12.7 16.0 20.0 25.0 32.0 38.1
64 64 76 87 96 114 142
53 53 63 66 81 83 96
97 97 126 126 145 145 204
32 32 38 43.5 48 57 71
22.4 22.4 22.4 22.4 22.4 25.4 25.4
35.0 35.0 35.0 35.0 35.0 38.1 38.1
10-24 UNC 10-24 UNC 10-24 UNC 10-24 UNC 10-24 UNC 1/4-20 UNC 1/4-20 UNC
6.0 6.0 12.0 14.0 24.0 30.0 50.0
1000 PRESSURE (Psi)
VALVES
MATERIALS LIST
800 600 400 200 0 -29
-18
38
93
149
TEMPERATURE (°C)
Midway Metals | The Stainless Steel Innovators | 9 th Edition | www.midwaymetals.com.au
204
260
3 WAY REDUCED PORT 1000 WOG BALL VALVE -THREADED ‘T’ PORT SPECIFICATIONS:
INVESTMENT CAST BODY & END CAP
END TYPE:
THREADED BSP OR NPT, BOTTOM-LOADED, BLOW-OUT-PROOF STEM, ADJUSTABLE STEM PACKING, REINFORCED PTFE MINIMIZE SEAT DISTORTION, EASY ACTUATOR MOUNTING, STAINLESS STEEL HANDLE WITH VINYL GRIP
OPTION:
LOCKING DEVICE
APPLICATIONS:
FOR GENERAL CHEMICAL & INDUSTRIAL SERVICES
PRESSURE RATING:
1000 PSI WOG (NON-SHOCK)
STEAM RATING:
150 PSI WSP
TEMPERATURE RANGE:
-29°C + 200°C
73
NO.
PART NAME
SPECIFICATION
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
BODY END CAP BLIND CAP BALL BALL SEATS STEM THRUST WASHER END SEAL STEM PACKINGS GLAND HANDLE FLOW INDICATOR PLATE HANDLE WASHER HANDLE NUT LOCKING PLATE HANDLE SLEEVE
ASTM A351 GR.CF8M ASTM A351 GR.CF8M ASTM A351 GR.CF8M ASTM A351 GR.CF8M REINFORCED PTFE STAINLESS STEEL 316 REINFORCED PTFE REINFORCED PTFE REINFORCED PTFE STAINLESS STEEL 304 STAINLESS STEEL 304 ALUMINIUM STAINLESS STEEL 304 STAINLESS STEEL 304 STAINLESS STEEL 304 VINYL GRIP
VALVES
MATERIALS LIST
PRESSURE TEMPERTURE RATINGS
SIZE
d
L
H
D1
B
F
G
W1
W2
h
Inch 1/2 3/4 1 1 1/4 1 1/2 2
12.7 16.0 20.0 25.0 32.0 38.1
75 85 100 115 125 148
59 64 80 90 96 106
126 126 145 145 204 204
71 81.5 102 108.5 121 138.5
33.5 39.0 50.5 51.0 58.0 65.5
37.5 42.5 51.5 57.5 63.0 73.0
22.4 22.4 22.4 22.4 25.4 25.4
35.0 35.0 35.0 35.0 38.1 38.1
10-24 UNC 10-24 UNC 10-24 UNC 10-24 UNC 1/4-20 UNC 1/4-20 UNC
1000 PRESSURE (Psi)
DIMENSIONS (mm)
800 600 400 200 0 -29
-18
38
93
149 204 260
TEMPERATURE (°C)
Midway Metals | The Stainless Steel Innovators | 9 th Edition | www.midwaymetals.com.au
74
WOG CHECK VALVE / Y STRAINER SPECIFICATIONS:
INVESTMENT CAST BODY & BONNET (SOLUTION TREATED) HIGH PERFORMANCE & LOW COST
END TYPE:
THREADED BSP OR NPT SS316 STAINLESS STEEL SCREEN / BONNETT SWING TYPE DISC
APPLICATIONS:
FOR GENERAL CHEMICAL & INDUSTRIAL SERVICES
STEAM RATING:
150 PSI WSP
TEMPERATURE RANGE:
+232°C MAX
200 WOG SWING CHECK VALVE THREADED PRESSURE RATING: 200 PSI WOG (NON-SHOCK)
VALVES
MATERIALS LIST NO.
PART NAME
SPECIFICATION
1 2 3 4 5 6 7
BODY CAP DISC PLUG PIN PLUG GASKET GASKET
ASTM A351 GR.CF8M ASTM A351 GR.CF8M ASTM A351 GR.CF8M STAINLESS STEEL 316 STAINLESS STEEL 316 PTFE REINFORCED PIPE
DIMENSIONS (mm) SIZE Inch 1/2 3/4 1 1 1/4 1 1/2 2
d
L
H
Cv FACTOR
PRESSURE TEMPERTURE RATINGS Below 120°C non-shock water
15 20 25 32 40 50
65 80 90 105 120 141
44 53 58 62 73 78
6.9 16.3 30 49 72 130
200psi (14kgf/cm2) max
Below 220°C air, water, oil, gas 150psi (10kgf/cm2) max Saturated steam
150 psi (10kgf/cm2) max
800 WOG Y STRAINER THREADED PRESSURE RATING: 800 PSI WOG (NON-SHOCK)
MATERIALS LIST NO.
PART NAME
SPECIFICATION
1 2 3 4
BODY BOTTOM PLUG SCREEN GASKET
ASTM A351 GR.CF8M ASTM A351 GR.CF8M STAINLESS STEEL 316 REINFORCED PIPE
DIMENSIONS (mm) SIZE
d
L
H
Cv FACTOR
Inch 1/4 3/8 1/2 3/4 1 1 1/4 1 1/2 2
15 15 15 20 25 32 40 50
78 78 78 93 108 128 143 173
50 50 50 60 70 82 92 118
3.5 3.5 3.5 6.5 10 19 26 45
PRESSURE TEMPERTURE RATINGS Below 120°C non-shock water
800psi (21kgf/cm2) max
Below 220°C air, water, oil, gas
150psi (10kgf/cm2) max
Saturated steam
150 psi (10kgf/cm2) max
Midway Metals | The Stainless Steel Innovators | 9 th Edition | www.midwaymetals.com.au
1000 WOG SPRING CHECK VALVE SPECIFICATIONS:
3 PIECE INVESTMENT CAST BODY & END CAP
END TYPE:
THREADED BSP OR NPT
PRESSURE RATING:
1000 PSI WOG (NON SHOCK)
APPLICATIONS:
FOR GENERAL CHEMICAL & INDUSTRIAL SERVICES
STEAM RATING:
150 PSI WSP
TEMPERATURE RANGE:
-29°C TO 200°C MAX
75
NO.
PART NAME
SPECIFICATION
1 2 3 4
BODY END CAP DISC BODY SEAL
5
SPRING
6 7 8 9
SPRING HOLDER WASHER NUT BOLT
ASTM A351 GR.CF8M ASTM A351 GR.CF8M STAINLESS STEEL T-316 15% GF PTFE 300 SERIES STAINLESS STEEL STAINLESS STEEL T-316 304 304 304
DIMENSIONS (mm) SIZE
d
L
H
Cv FACTOR
Inch 1/4 3/8 1/2 3/4 1 1 1/4 1 1/2 2 2 1/2 3 4
10 10 14 18.1 24.2 30.2 36.2 48.3 63 76 98
56 56 65 70 78 96 102 118 145 156 185
8 10 15 20 25 32 40 50 65 80 100
14 14 18 22 27.5 32 37 47 47 55 70
PRESSURE TEMPERTURE RATINGS Below 120°C non-shock water
300psi (21kgf/cm2) max
Below 220°C air, water, oil, gas
150psi (10kgf/cm2) max
Saturated steam
150 psi (10kgf/cm2) max
Midway Metals | The Stainless Steel Innovators | 9 th Edition | www.midwaymetals.com.au
VALVES
MATERIALS LIST
76
PRESSURE CONVERSIONS
TECHNICAL DATA
PRESSURE UNITS CROSS REFERENCE CHART psi
atms
Ft Hd. H2 0 AT 20°C
IN H2 0
kg/cm 2
METRES H2 0
in Hg at 20°C
mm Hg.
cm Hg.
bar
millibar (mb)
kPa
1
0.068
2.31
27.72
0.07
0.704
2.043
51.864
5.188
0.069
68.947
6.895
14.896
1
33.659
407.513
1.033
10.351
30.019
762.48
76.284
1.013
1013
101.325
0.433
0.029
1
12
0.03
0.305
0.884
22.452
2.245
0.03
29.837
2.984
0.036
0.0025
0.833
1
0.0025
0.025
0.074
1.871
0.187
0.0025
2.486
0.49
14.233
0.968
32.867
394.408
1
10.018
39.054
737.959
73.796
0.981
980.682
98.088
1.422
0.097
3.287
39.37
0.099
1
2.905
73.796
7.379
0.98
98.068
9.807
0.489
0.033
1.131
13.575
0.034
0.345
1
25.4
2.54
0.034
33.753
3.375
0.019
0.0013
0.045
0.534
0.0014
0.0136
0.039
1
0.1
0.001
1.329
0.133
0.193
0.0131
0.445
5.34
0.014
0.136
0.393
10
1
0.0133
13.29
1.328
14.503
0.987
33.514
402.164
1.02
10.211
29.625
752.47
75.247
1
1000
100
0.014
0.0009
0.033
0.402
0.001
0.0102
0.029
0.752
0.075
0.001
1
0.1
0.145
0.0096
0.335
4.021
0.01
0.102
0.296
7.525
0.752
0.01
10
1
METRIC PRESSURE MEASUREMENT UNIT 1 bar
bar 1
mbar 1000
kbar 1
kPa
Mpa
5
10
100
0.1
1 mbar
0.001
1
10
100
0.1
104
1 kbar
1000
106
1
105
105
100
5
6
Pa
5
1 Pa
10
0.01
10
1
0.001
106
1 kPa
0.01
10
105
1000
1
0.001
1 MPa
10
104
0.01
106
1000
1
Midway Metals | The Stainless Steel Innovators | 9 th Edition | www.midwaymetals.com.au
USEFUL CONVERSION FACTORS TO CONVERT “A”
INTO “B”
77
MULTIPLY BY “C”
PRESSURE A
B
C
PSI KPA KPA BAR BAR FEET OF WATER METRES OF WATER
KPA PSI BAR KPA PSI PSI KPA
6.894 0.145 0.01 100 14.5 0.4335 9.807
A
B
C
LITRES LITRES IMP GALLONS US GALLONS US GALLONS IMP GALLONS LITRES LITRES
IMP GALLONS US GALLONS LITRES LITRES IMP GALLONS US GALLONS CUBIC FEET CUBIC METRES
0.222 0.263 4.5 3.785 0.832 1.2 0.035 0.001
A
B
C
US GALLONS / MIN CUBIC FEET / MIN POUNDS / HOUR KILOGRAMS / HOUR LITRES / SEC CUBIC METRES / HOUR
LITRES / SEC LITRES / SEC KILOGRAMS / HOUR POUNDS / HOUR CUBIC METRES / HOUR LITRES / SEC
0.063 0.472 0.454 2.205 3.6 0.278
A
B
C
METRES METRES MILLIMETRES INCHES
FEET YARDS INCHES MILLIMETRES
3.281 1.094 0.039 25.4
VOLUME/TIME
LENGTH
SPEED/VELOCITY A
B
C
FEET / SEC FEET / SEC METRES / MIN METRES /SEC
METRES / MIN METRES / SEC FEET / MIN FEET / MIN
18.29 0.305 0.055 196.86
Midway Metals | The Stainless Steel Innovators | 9 th Edition | www.midwaymetals.com.au
TECHNICAL DATA
VOLUME
78
STAINLESS STEEL GRADE AUSTENITIC GENERAL SERVICE & WET CORROSION COMMON NAME
UNS #
FORMS AVAILABLE
C
Cr
Ni
Mo
Ti
OTHER
303
S30300
Bars
0.12
18
9
–
–
0.2 5S
Free machining steel used where extensive machining is required. Corrosion resistance and weldability inferior to 304.
S30400
Sheet, Coil, Plate, Bars, Welded & Seamless Pipe & Tube
0.05
18.5
8.5
–
–
–
General purpose steel with good corrosion resistance for most applications. Used for architecture, food processing, domestic sinks and tubs and deep drawing applications.
S30403
Sheet, Coil, Plate, Bars, Welded & Seamless Pipe & Tube
0.025
18.5
9
–
–
–
Chemical plant and food processing equipment, where freedom from sensitisation is required in plate.
S31600
Sheet, Coil, Plate, Bars, Welded & Seamless Pipe & Tube
0.05
17
11
2.1
–
–
Used where higher corrosion resistance is required, i.e. Marine equipment. Can be welded up to 3mm without subsequent heat treatment.
316L
S31603
Sheet, Coil, Plate, Bars, Welded & Seamless Pipe & Tube
0.02
17
11
2.1
–
–
A low carbon modification of 316 where heavy section weldments are required without the risk of intergranular corrosion.
316Ti
S31635
Plate, Pipe & Tube
0.05
17
11
2.1
0.5
–
A titanium stabilised version of 316 used where good resistance to intergranular corrosion and high temperature strength is required.
317
S31700
Sheet, Coil & Plate
0.07
19
13
3.25
–
–
For chemical plant - has a greater corrosion resistance than 316 in certain applications, notably in contact with brines and halogen salts. Also available in a low carbon “L” grade.
904L
N08904
Sheet, Plate, Bar, Pipe & Tube
0.02
20
25
4.5
–
1.5cU
High resistance to: general corrosion in e.g. Sulphuric and acetic acids; crevice corrosion; stress corrosion cracking; pitting in chloride beading solutions. Good weldability.
254SMO
S31254
Sheet, Plate, Bar, Pipe & Tube
0.02
20
18
6
–
0.2N
Used where high resistance to chloride pitting and crevice corrosion is required, e.g. Seawater heat exchangers, bleach vats and washers in the pulp and paper industry.
304
TECHNICAL DATA
304L
316
TYPICAL APPLICATIONS
Midway Metals | The Stainless Steel Innovators | 9 th Edition | www.midwaymetals.com.au
STAINLESS STEEL GRADE
79
AUSTENITIC HIGH TEMP GRADES COMMON NAME
UNS #
FORMS AVAILABLE
C
Cr
Ni
Mo
Ti
OTHER
321
S32100
Sheet, Coil, Plate, Bars, Welded & Seamless Pipe & Tube
0.06
18
10
–
0.5
–
Heavy weldments in chemical and other industries. Suitable for heat resisting applications to 800°C. Not suitable for bright polishing.
310
S31000
Sheet, Coil, Plate & Bars
0.12
25
20
–
–
–
Furnace parts and equipment. Resistant to temperature 900°C to 1000°C.
310S
S31008
Sheet, Plate, Bar, Tube & Pipe
0.1
21
11
–
–
0.15n 0.5Ce
Used for furnace parts, radiant shields, fluidised beds. Resistant to temperatures up to 1150°C. Possesses high strength and resistance to sigma phase formation.
153MA
S30415
Sheet, Plate
0.05
18.5
9.5
–
–
Si,Ce
Internal shells in bell type furnaces, combustion chambers for the destruction of industrial gases. Off-gas lines and recuperators for temperatures up to about 950°C.
S30815
Sheet, Plate, Bar, Tube & Pipe.
Si,Ce
Sintering plants, blast furnace plants, steel melting, heating furnaces, heat treatment furnaces, mineral preparation and cement production. Scaling temperature 1150°C.
Si,Ce
Cement, gasification, iron and steel, power generation industries, heat treatment and thermal destruction plants. High scaling temperature approximately 1175°C.
353MA
s35315
Sheet, Plate
0.09
0.05
21
25
11
35
–
–
–
–
COMMON FERRITIC STAINLESS STEEL GRADES COMMON NAME
UNS #
FORMS AVAILABLE
C
Cr
Ni
Mo
Ti
OTHER
409
S40900
Sheet & Coil
0.02
11.5
–
–
0.25
–
Heat resistant steel, easily formed and welded. Mainly used for automotive exhausts or welded applications where superior performance to galvanised steel is required.
446
S44600
Tube & Pipe
0.08
26
–
–
–
–
Used for severe heat resistant applications up to 1200°C. In recuperators, highly resistant to sulphidation and oil ash corrosion.
430
S43000
Sheet, Coil, Plate & Bars
0.06
17
–
–
–
–
Interior architectural component, stove and automotive trim. Welds tend to be brittle.
TYPICAL APPLICATIONS
444
S44400
Sheet & Coil
0.02
18.5
–
2
0.4
–
Heat exchanger and hot water tanks and in chloride containing waters. Not prone to chloride stress corrosion – superior resistance to pitting, crevice and intergranular corrosion. Possesses excellent deep drawing properties.
3CR12 (1.4003)
S41050
Sheet/Plate & Pipe
0.02
11.5
0.4
–
–
–
Good corrosion resistance and readily weldable it provides a cost effective choice for many structural applications where mild or low alloyed steels require regular repair or replacement.
Midway Metals | The Stainless Steel Innovators | 9 th Edition | www.midwaymetals.com.au
TECHNICAL DATA
253MA
TYPICAL APPLICATIONS
80
STAINLESS STEEL GRADE
TECHNICAL DATA
COMMON MARTENSITIC STAINLESS STEEL GRADES COMMON NAME
UNS #
FORMS AVAILABLE
C
Cr
Ni
Mo
Ti
OTHER
410
S41000
Bars
0.1
12.5
–
–
–
–
416
S41600
Bars
0.1
12.5
–
–
–
0.20S
420
S42000
Bars
0.25
12.5
–
–
–
–
General engineering uses, such as pump and valve shafts.
420C
–
Sheet, Coil, Plate & Bars
0.3
12.5
–
–
–
–
Developed for high hardness after heat treatment. Used for cutting tools, surgical knives, etc.
431
S43100
Bars
0.18
16
2
–
–
–
Hardenable steel with corrosion resistance approaching 302. Used for pump shafts etc. Should be double tempered after hardening.
440C
S44004
Bars
4.1
17
–
0.4
–
–
Capable of being hardened to 60 Rc. Highest hardness and abrasion resistance of all the stainless steels. Corrosion resistance similar to 410.
UNS #
FORMS AVAILABLE
C
Cr
Ni
Mo
Ti
OTHER
TYPICAL APPLICATIONS
S32101
Sheet, Plate, Bar, Tube, Pile
–
0.22N 5Mn
Low alloyed, general purpose duplex stainless steel. Its high mechanical strength is similar to that of other duplex grades and its good corrosion resistance is on par with that of most standard grades of stainless steel. Building and construction, storage tanks, flood gates.
0.1N
Similar corrosion resistance to 316L. Higher yield strength, corrosion and stress corrosion cracking resistance. Used where high corrosion resistance is required in marine, mining, chemical, food and power industries. Particularly useful in nitric acid.
TYPICAL APPLICATIONS General purpose grade for use in mildly corrosive environments. Free machining variation of 410.
DUPLEX GRADES COMMON NAME
2101
0.03
21
1.5
0.3
S32304
Sheet, Plate, Pipe & Fittings
2205
S31803
Plate, Pipe, Bar, Fitting
0.03
22
5.5
3
–
0.14N
Superior corrosion resistance to 316L and 317L, combined with high strength. Excellent stress corrosion and abrasion resistance. Typically used in heat exchangers, gas scrubbers, fans, chemical tanks, flowlines, marine and refinery applications.
2507
S32750
Plate, Pipe, Bar, Fittings
0.03
25
7
4
–
0.3N
Extremely high resistance to corrosion in severe marine, chloride and acid environments. Suitable for heat exchangers, reactors, pipework etc.
2304
0.03
23
4
–
–
Midway Metals | The Stainless Steel Innovators | 9 th Edition | www.midwaymetals.com.au
CORROSION CHART
81
STAINLESS STEEL
R
MOLYBDENUM (316, 316L)
DUPLEX (-2205)
3CR12 (1.4003)
20° R1 R R R2 R R R3 R R R5 R R R5 R
60° R1 R R NR R R R3 R R R5 R6 R NR R
100° R1 R NR NR R R R3 R R R5 NR R NR R
20° R1 R R R R R R3 R R R5 R R R5 R
60° R1 R R R R R R3 R R R5 R R R5 R
100° R1 R R NR R R R3 R R R5 NR R NR R
20° R1 R R R R R R4 R R R R R R R
60° R1 R R R R R NR R R R R R R R
100° R1 R1 NR R1 R1 R NR R R R NR R NR R
20° R1 R ND R2 R R NR R R R5
100° R1 ND ND ND ND ND NR R ND ND
R NR R
60° R1 R ND NR ND ND NR R ND ND ND R NR R
R7 R7 R R1 R R R8 R9 NR R NR R R R R R R1 R NR
ND ND ND R1 R R NR NR NR R NR R R R R R R1 R NR
ND ND ND R1 R R NR NR NR R NR ND R R R6 R R1 R NR
R R R R R R R8 R9 NR R R8 R R R R R R1 R NR
ND ND ND R R R NR R9 NR R NR R R R R R R1 R NR
ND ND ND R R R NR R9 NR R NR ND R R R6 R R1 R NR
R R R R R R R R NR R R10 R R R R6 R R R NR
ND ND ND R R R R ND NR R R10 R R R R6 R R R NR
ND ND ND R R R R ND NR R R10 R R R ND R R ND NR
R7 R7 R7 R1 R R NR NR NR R NR R R R ND R ND ND NR
ND ND ND ND R R NR NR NR R NR R R9 R R6 R ND ND NR
ND ND ND ND R R NR NR NR R NR R NR R R6 R ND ND NR
R10
NR
NR
R9
R11
R11
R
R
ND
R5
NR
NR
NR NR R6 R
NR NR R6 R
NR NR R6 R
NR10 NR R R
NR NR R R
NR NR R6 R
ND NR R R
ND NR R R
ND NR R R
ND NR NR R
ND NR NR R
ND NR NR R
R NR R
Indicates that the material is resistant to the named chemical up to the temperature shown, subject to limitations indicated below.
NR Indicates that the material is not recommended. ND Indicates that no data is available.
1
Not if chlorides present
11 May cause stress corrosion cracking
2
Limited data
12 When free of SO2
3
Depending upon the acid
13 May cause contamination of product
4
Acid fumes dry, attack may occur if moisture builds up
5
Anhydrous
14 Dilute hypochlorites can be used to sterilize some stainless steel with extreme care
6
Depending upon concentration
15 General corrosion may become excessive
7
May discolour with time
16 10%
8
In strong solutions only when inhibited
17 In the absence of impurities
9
Pitting possible in stagnant conditions
18 Dilute
10 Possibility of pitting
19 Some attack at high temperatures
Midway Metals | The Stainless Steel Innovators | 9 th Edition | www.midwaymetals.com.au
TECHNICAL DATA
18/8 (304, 304L, 321) TEMPERATURE °C Aldehydes Acetic Acid (10%) Acetic Acid (glac. & anh.) Acetic anydride Ketones Acetylene Acid Fumes Alcohols Alphatic Esters Alkyl Chlorides Alum Ammonia Antimony Trichloride Aromatic Solvents Atmospheric Industrial Marine Rural Ascorbic Acid Benzoic Azid Boric Acid Brines, saturated Bromide (K) soln. Bromine (+ aqu.) Butyl Acetate Calcium Chloride Carbon Disulphide Carbonic Acid Carbon Tetrachloride Caustic Soda & Potash Cellulose Paint Chlorates of Na, K, Ba Chlorine, dry Chlorine, wet Chlorides of Na, K, Mg, Ca, Ni, NH4, Alm Sn, Zn Chlorosuphonic Acid Chomic Acid (80%) Citric Acid Cresylic Acids (50%)
82
CORROSION CHART STAINLESS STEEL 18/8 (304, 304L, 321)
TECHNICAL DATA
TEMPERATURE °C Detergents, synthetic Emulsifiers (all conc.) Esters & Ethers Fatty Acids (>C/6) Ferric Chloride Fluorinated Refrigerants, Aerosols, e.g. Freon Fluorine, dry Fluorine, wet Formic Acid Fruit Juices Gelatine Glycols Hydrobromic Acid (50%) Hydrochloric Acid (10%) Hydrochloric Acid (conc.) Hydrocyanic Acid Hydroflouric acid Hydrogen Peroxide (30%) Hydrogen Sulphide Hypochlorite (Na 12 - 14%) Lactic Acid (100%) Lead Acetate Lead Perchlorate Lime (Ca0) Manganate, Potassium (K) Meat Juices Mercuric Chloride Milk and its products Molasses Monoethanolamine Naphthalen Nitrates of Na, K, NH3, Ag Nitric Acid (
