Cover and contents
22/11/01
2:04 pm
Page 2
Precision Systems for the Electronics Bench
SOLDERING, DESOLDERING AND REWORK SYSTEMS
Precision Systems for the Electronics Bench
WORLD HEADQUARTERS AND NORTH AMERICAN OFFICE
1530 O’BRIEN DRIVE • MENLO PARK • CA 94025 • USA TEL: +1 650-325-3291 • FAX: +1 650-325-5932 www.metcal.com MET-US-001
Cover and contents
22/11/01
2:04 pm
Page 4
S P440
S P440 De s old e r in g S y s te m
Contents
Since 1982, Metcal has been the industr y ’s single source of high-per formance, precision systems for the electronics bench. Always ahead of the competition,
SmartHeat® Technology
0 2
MX-500 Soldering, Desoldering & Rework System
0 4
Metcal’s soldering/desoldering stations, BGA/CSP/QFP rework equipment and f u m e e x t r a c t i o n s y s t e m s c o n t i n u e t o s e t t h e s t a n d a r d f o r r e l i a b i l i t y, f l e x i b i l i t y and cost-effective per formance. Soldering Tip Cartridges
0 7
Desoldering Tip Cartridges
1 0
because of our continuing "technology innovation."
Rework Tip Cartridges
1 1
By listening to customers, focusing on their specific needs and working as
Speciality Tip Cartridges
1 4
Microfine Rework Tip Cartridges
1 5
Accessories & Spare Parts
1 6
R e c e n t l y, Fr o s t & S u l l i v a n a w a r d e d M e t c a l t h e p r e s t i g i o u s " M a r k e t E n g i n e e r i n g Leadership Award," recognizing Metcal as the leader in the world SMT rework and repair equipment market, in par t through dominant market share, but also
t h e i r t e c h n o l o g y p a r t n e r, w e c o n t i n u e t h e q u e s t f o r e x c e l l e n c e , e c o n o m y a n d innovation – aimed at helping each customer meet increasingly complex electronics manufacturing challenges.
We l c o m e t o M e t c a l . SP200 Soldering System
1 8
SP440 Self-Contained Desoldering System
2 0
QX2 Convection Rework System
2 2
SMT-1160 Hot Air Pencil
2 7
page 01
Cover and contents
22/11/01
2:04 pm
Page 4
S P440
S P440 De s old e r in g S y s te m
Contents
Since 1982, Metcal has been the industr y ’s single source of high-per formance, precision systems for the electronics bench. Always ahead of the competition,
SmartHeat® Technology
0 2
MX-500 Soldering, Desoldering & Rework System
0 4
Metcal’s soldering/desoldering stations, BGA/CSP/QFP rework equipment and f u m e e x t r a c t i o n s y s t e m s c o n t i n u e t o s e t t h e s t a n d a r d f o r r e l i a b i l i t y, f l e x i b i l i t y and cost-effective per formance. Soldering Tip Cartridges
0 7
Desoldering Tip Cartridges
1 0
because of our continuing "technology innovation."
Rework Tip Cartridges
1 1
By listening to customers, focusing on their specific needs and working as
Speciality Tip Cartridges
1 4
Microfine Rework Tip Cartridges
1 5
Accessories & Spare Parts
1 6
R e c e n t l y, Fr o s t & S u l l i v a n a w a r d e d M e t c a l t h e p r e s t i g i o u s " M a r k e t E n g i n e e r i n g Leadership Award," recognizing Metcal as the leader in the world SMT rework and repair equipment market, in par t through dominant market share, but also
t h e i r t e c h n o l o g y p a r t n e r, w e c o n t i n u e t h e q u e s t f o r e x c e l l e n c e , e c o n o m y a n d innovation – aimed at helping each customer meet increasingly complex electronics manufacturing challenges.
We l c o m e t o M e t c a l . SP200 Soldering System
1 8
SP440 Self-Contained Desoldering System
2 0
QX2 Convection Rework System
2 2
SMT-1160 Hot Air Pencil
2 7
page 01
MX 500
22/11/01
MX-500
2:25 pm
Page 12
Unrivalled Comfor t And Simplicity
MX- 500
The sho r t ti p -to -gr i p di stanc e, c harac ter i st ic o f t he M etc al han d- pie c e, improves proces s precis ion , esp ec i al l y f o r f i ne-p i tc h ap p l i c atio ns . The eas y- sq uee z e des ign o f Me tcal’s Talo n ® t weezers h as been
Soldering, Desoldering & Rework System
MX-500
er go no m i c al l y desi gned f o r sup e rio r p e rfo rm an ce, un m atc h ed c om fo r t and optimu m con t ro l.
M X- 5 0 0 S S M T S O L D E R I N G / R E W O R K S Y S T E M
Industr y Standard, Soldering, Desoldering And Rework System M etc a l ’s M X- 500 S o l deri ng, D es o l deri n g & Rewo rk S y st em i s t h e b en c h m a r k a g a i n s t wh i c h o t h e r s o l deri ng, des o l deri ng a nd rewo rk s y st em s a re m ea su red . F l ex i b l e, fa st a n d p o w e r fu l , t h e M X-5 0 0
Part No.
MX-500S-11 MX-500S-21
Description
Two Port 100/120 VAC, Solder System Two Port 220/240 VAC, Solder System
S o l deri ng, D es o l deri ng & R ewo rk S y st em ra i ses b en c h -t o p c o n d u c t i o n so l d e r i n g t o a n e w l e v e l o f INCLUDES
pro c es s c o ntro l , p ro duc ti vi ty a nd thro u g h p u t .
MX-500P MX-RM3E MX-WS4 AC-YS3 AC-CP2
Two Port Switchable Power Supply with Power Cord* Rework Hand-Piece with Cord Workstand Sponge Cartridge Removal Pad
M X- 5 0 0 T S S M T R E W O R K / TA L O N ® S Y S T E M
MX-500TS-11 MX-500TS-21
Two Port 100/120 VAC, Solder/Talon® System Two Port 220/240 VAC, Solder/Talon® System
INCLUDES MX-500P MX-TALON MX-WS5 MX-RM3E MX-WS4 AC-YS3 AC-CP2
Two Port Switchable Power Supply with Power Cord* Talon® Hand-Piece with Cord Workstand Rework Hand-Piece with Cord Workstand Sponge (2) Cartridge Removal Pad (2)
TA L O N ® U P G R A D E K I T S
H i g h e r T h r o u g h p u t A t L o w e r Te m p e r a t u r e s Un l i ke c on ve n ti on a l s ol de r i n g/ r e wor k s y s t em s t ha t r el y o n s t o r ed ener g y, Met c a l system s use S m ar tHeat ® f or di r e c t p owe r on de m a n d. D e s p i te i t s c a p a c i t y t o w o r k a t l o w er, s a f er t em p er atur es, S m ar tHeat
®
sti l l
de l i ve r s th e f as te s t te m p e r a tu r e r e c over y, j o i nt -t o -j o i nt , i n t he i nd us t r y.
Ve r s a t i l i t y W i t h o u t C o m p r o m i s e M e t c a l ’ s M X- 5 0 0 S o l d e r i n g , D e s o l d e r i n g & R e w o r k S y s t e m h a n d l e s b o t h S M T a n d t h r o u g h - h o l e s ol de r i n g/ r e wor k wi th on e p owe r s u p p l y a t t he b enc h. Wi t h t w o s w i t c ha b l e o utp uts, the system c an b e
page
adap te d to y ou r e x a c t n e e ds , u s i n g t w o o f t he t hr ee t o o l s a va i l a b l e (s o l d er i ng i r o n, Tal o n ® tweez er s,
04 de s ol de r gu n ) to c on f i gu r e th e m os t p o w er f ul b enc h-t o p s o l d er i ng / r ew o r k s ystem o n the m ar ket. I n
M X-TA L O N - 0 1
Talon® Upgrade Kit
INCLUDES MX-TALON MX-WS5 AC-YS3 AC-CP2
Talon® Hand-Piece with Cord Workstand Sponge Cartridge Removal Pad
SM-TALON-02
Talon® Upgrade with Switchbox for Older STSS Systems
INCLUDES MX-TALON MX-WS5 AC-YS3 AC-CP2 STSS-SW1E
Talon® Hand-Piece with Cord Workstand Sponge Cartridge Removal Pad Switchbox with Storage Tray
addi ti on , th e M X-500 S o l deri ng, D es o l d eri n g & Rewo rk S y st em ’ s p o w er s up p l y has an auto m ati c shutof f, wh i c h h e l p s m a x i m i z e ti p c a r tr i dge l i f e, a nd a s t a nd a r d f o ur y ea r w a r r a nt y.
Tip cartridges sold separately from all systems. *220/240 VAC systems do not include power cords.
page 05
MX 500
22/11/01
MX-500
2:25 pm
Page 12
Unrivalled Comfor t And Simplicity
MX- 500
The sho r t ti p -to -gr i p di stanc e, c harac ter i st ic o f t he M etc al han d- pie c e, improves proces s precis ion , esp ec i al l y f o r f i ne-p i tc h ap p l i c atio ns . The eas y- sq uee z e des ign o f Me tcal’s Talo n ® t weezers h as been
Soldering, Desoldering & Rework System
MX-500
er go no m i c al l y desi gned f o r sup e rio r p e rfo rm an ce, un m atc h ed c om fo r t and optimu m con t ro l.
M X- 5 0 0 S S M T S O L D E R I N G / R E W O R K S Y S T E M
Industr y Standard, Soldering, Desoldering And Rework System M etc a l ’s M X- 500 S o l deri ng, D es o l deri n g & Rewo rk S y st em i s t h e b en c h m a r k a g a i n s t wh i c h o t h e r s o l deri ng, des o l deri ng a nd rewo rk s y st em s a re m ea su red . F l ex i b l e, fa st a n d p o w e r fu l , t h e M X-5 0 0
Part No.
MX-500S-11 MX-500S-21
Description
Two Port 100/120 VAC, Solder System Two Port 220/240 VAC, Solder System
S o l deri ng, D es o l deri ng & R ewo rk S y st em ra i ses b en c h -t o p c o n d u c t i o n so l d e r i n g t o a n e w l e v e l o f INCLUDES
pro c es s c o ntro l , p ro duc ti vi ty a nd thro u g h p u t .
MX-500P MX-RM3E MX-WS4 AC-YS3 AC-CP2
Two Port Switchable Power Supply with Power Cord* Rework Hand-Piece with Cord Workstand Sponge Cartridge Removal Pad
M X- 5 0 0 T S S M T R E W O R K / TA L O N ® S Y S T E M
MX-500TS-11 MX-500TS-21
Two Port 100/120 VAC, Solder/Talon® System Two Port 220/240 VAC, Solder/Talon® System
INCLUDES MX-500P MX-TALON MX-WS5 MX-RM3E MX-WS4 AC-YS3 AC-CP2
Two Port Switchable Power Supply with Power Cord* Talon® Hand-Piece with Cord Workstand Rework Hand-Piece with Cord Workstand Sponge (2) Cartridge Removal Pad (2)
TA L O N ® U P G R A D E K I T S
H i g h e r T h r o u g h p u t A t L o w e r Te m p e r a t u r e s Un l i ke c on ve n ti on a l s ol de r i n g/ r e wor k s y s t em s t ha t r el y o n s t o r ed ener g y, Met c a l system s use S m ar tHeat ® f or di r e c t p owe r on de m a n d. D e s p i te i t s c a p a c i t y t o w o r k a t l o w er, s a f er t em p er atur es, S m ar tHeat
®
sti l l
de l i ve r s th e f as te s t te m p e r a tu r e r e c over y, j o i nt -t o -j o i nt , i n t he i nd us t r y.
Ve r s a t i l i t y W i t h o u t C o m p r o m i s e M e t c a l ’ s M X- 5 0 0 S o l d e r i n g , D e s o l d e r i n g & R e w o r k S y s t e m h a n d l e s b o t h S M T a n d t h r o u g h - h o l e s ol de r i n g/ r e wor k wi th on e p owe r s u p p l y a t t he b enc h. Wi t h t w o s w i t c ha b l e o utp uts, the system c an b e
page
adap te d to y ou r e x a c t n e e ds , u s i n g t w o o f t he t hr ee t o o l s a va i l a b l e (s o l d er i ng i r o n, Tal o n ® tweez er s,
04 de s ol de r gu n ) to c on f i gu r e th e m os t p o w er f ul b enc h-t o p s o l d er i ng / r ew o r k s ystem o n the m ar ket. I n
M X-TA L O N - 0 1
Talon® Upgrade Kit
INCLUDES MX-TALON MX-WS5 AC-YS3 AC-CP2
Talon® Hand-Piece with Cord Workstand Sponge Cartridge Removal Pad
SM-TALON-02
Talon® Upgrade with Switchbox for Older STSS Systems
INCLUDES MX-TALON MX-WS5 AC-YS3 AC-CP2 STSS-SW1E
Talon® Hand-Piece with Cord Workstand Sponge Cartridge Removal Pad Switchbox with Storage Tray
addi ti on , th e M X-500 S o l deri ng, D es o l d eri n g & Rewo rk S y st em ’ s p o w er s up p l y has an auto m ati c shutof f, wh i c h h e l p s m a x i m i z e ti p c a r tr i dge l i f e, a nd a s t a nd a r d f o ur y ea r w a r r a nt y.
Tip cartridges sold separately from all systems. *220/240 VAC systems do not include power cords.
page 05
page 07
page 07
O T H E R S TA N D A R D T I P C A R T R I D G E S
O T H E R S TA N D A R D T I P C A R T R I D G E S MX Tips
.30" 7.6mm
S T T C -X 1 7 * Extra L arge Chisel .20” (5.0mm)
.20" 5.0mm
S T T C -X 0 2
.48" 12.2mm
.07" 1.78mm
.17" 4.3mm
.05"
Conical Sharp .07” (1.78mm)
S T T C -X 1 5
S T T C -X 4 6
Bevel 30° .05” (1.3mm)
Long Reach Bevel 60º
1.3mm 30°
.45" 11.4mm
S T T C -X 6 5
.15" 3.8mm
.34" 8.6mm .12" 3.0mm
Chisel 90° .12” (3.0mm)
.12"
.19" 4.8mm
3.0mm
.39" 9.9mm
.43" 10.9mm
S T T C -X 4 3
.60" 15.2mm
.02" 0.5mm
S T T C -X 1 3
Groved Semi-Rigid Coax 500 SERIES X=5
.07"
Chisel 90º .12” (3.0mm)
2.03mm
S T T C -X 3 3
.18" 4.6mm
.02"
0.5mm
S T T C -X 0 4
Long Reach Chisel 60° .07” (1.78mm)
1.78mm
.19" .02" 4.8mm
0.5mm
.07"
.57" 14.5mm
1.78mm
.47" 11.9mm .06" 1.5mm .05"
.08" 2.0mm
page
.31" 7.9mm
.19" 4.7mm
Chisel Bent 30° .06” (1.5mm)
Chisel 30° .05” (1.3mm)
.86" 21.8mm
0.4mm
S T T C -X 9 9
S T T C -X 4 1
1.3mm
.016"
.08" 2.03mm
Fo r use wi th r o b o ti c ap p l i c ati o ns an d M X-R M5E o r M X- RM8 E hand les on ly. Similar to STTC tip ca r tridg es,
S T T C -X 1 1
c o m p ati b l e wi th the MX-R M3E han dle .
ho wever, S TR C Ro b o ti c Ti p Car tr i dg es have a shaf t le n gt h of 3 .15 ” (8 0 mm) an d, th erefore, are no t
Conical .02” (0.5mm)
.30" 7.6mm
Conical Grooved .08” (2.0mm)
.70" 17.8mm
08 .07"
.39" 9.9mm
1.78mm
S T T C -X 3 2 Conical Sharp .07” (1.78mm)
.39" 9.9mm
1.78mm
S T T C -X 8 3
S T T C -X 2 6 Sharp Bent 30° .016” (0.4mm)
S T T C -X 1 4
.04"
Chisel 30º .10” (2.5mm)
2.5mm
600 SERIES X=0
700 SERIES X=7
.46" 11.7mm
.07"
30°
Chisel 30º .04” (1.0mm)
1.0mm
Fo r use i n l o w tem p er atur e p l astic bo ndi ng appl i cati on s, t hes e al u min u m t ips can be u sed w it h all avai l ab l e MX handl es.
4.83mm
Bevel 60° .07” (1.78mm)
11.43mm
.19"
PTTB-501
2.0mm
.19"
.45"
Bonding Tip
.08" 2.0mm
.03" .76mm
.08"
PTTB-503
11.43mm 4.8mm
Bonding Tip
page 09
S T T C -X 0 5 Bevel 30° .07” (1.78mm)
S R T C -X 2 5
.36" 9.1mm
PTTB BONDING TIP CARTRIDGES
.45"
.56" 14.2mm
Chisel 30º .06” (1.5mm)
800 SERIES X=8, WHEN FOLLOWED BY AN *
Bevel 45º .08” (2.03mm)
Bevel 30° .07” (1.78mm)
S R T C -X 3 8
.39" 9.9mm
1.5mm
S R T C -X 3 6
.39" 9.9mm
.10"
.06"
Chisel 90º .12” (3.0mm)
3.0mm
Chisel 30º .07” (1.78mm)
1.78mm
S R T C -X 1 3
.19" 4.8mm
S R T C -X 3 7
.39" 9.9mm
.07"
Extra L arge Chisel .20” (5.0mm)
Conical .02” (0.5mm)
S T T C -X 4 7
60° .07" 1.78mm
1.78mm
S R T C -X 1 7 *
.20" 5.0mm
S T T C -X 1 6
S T T C -X 3 5
30° .07"
800 SERIES X=8, WHEN FOLLOWED BY AN *
Conical .08” (2.03mm)
Sharp Bent 30º .02” (0.5mm)
0.5mm
Chisel Bent 30º .07” (1.78mm)
700 SERIES X=1
SRTC ROBOTIC TIP C ARTRIDGES
S T T C -X 4 4
.02"
S T T C -X 9 8 .39" 9.9mm
600 SERIES X=0
S T T C -X 1 2
.17" .08" 4.3mm
S T T C -X 4 2
Heat Staking .19” (4.8mm)
S T T C -X 9 7
.12" .63" 16.0mm
S T T C -X 7 0
Bevel 30° .04” (1.0mm)
Conical Sharp .02” (0.5mm)
Chisel 90° .07” (1.78mm)
1.78mm
Conical Sharp .04” (1.0mm)
1.0mm
Chisel 90° .10” (2.5mm)
2.5mm
.07"
S T T C -X 0 3 *
S T T C -X 2 4
S T T C -X 3 1
.39" 9.9mm
.04"
Long Reach Chisel 12° .15” (3.8mm)
.10"
Conical Sharp .04” (1.0mm)
1.0mm
S T T C -X 2 0
.85" 21.6mm
.04” (1.0mm)
S T T C -X 0 1
.53" 13.5mm
.04"
L arge Chisel .20” (5.0mm)
.20" 5.0mm
MX Tips
.19" 4.8mm
.07"
11.43mm .45"
PTTB-502
12.7mm
.08"
PTTB-504
8.4mm .33"
.50"
Bonding Tip .09"
2.3mm
1.8mm 2.0mm
.25" 6.4mm
Bonding Tip
O T H E R S TA N D A R D T I P C A R T R I D G E S
O T H E R S TA N D A R D T I P C A R T R I D G E S MX Tips
.30" 7.6mm
S T T C -X 1 7 * Extra L arge Chisel .20” (5.0mm)
.20" 5.0mm
S T T C -X 0 2
.48" 12.2mm
.07" 1.78mm
.17" 4.3mm
.05"
Conical Sharp .07” (1.78mm)
S T T C -X 1 5
S T T C -X 4 6
Bevel 30° .05” (1.3mm)
Long Reach Bevel 60º
1.3mm 30°
.45" 11.4mm
S T T C -X 6 5
.15" 3.8mm
.34" 8.6mm .12" 3.0mm
Chisel 90° .12” (3.0mm)
.12"
.19" 4.8mm
3.0mm
.39" 9.9mm
.43" 10.9mm
S T T C -X 4 3
.60" 15.2mm
.02" 0.5mm
S T T C -X 1 3
Groved Semi-Rigid Coax 500 SERIES X=5
.07"
Chisel 90º .12” (3.0mm)
2.03mm
S T T C -X 3 3
.18" 4.6mm
.02"
0.5mm
S T T C -X 0 4
Long Reach Chisel 60° .07” (1.78mm)
1.78mm
.19" .02" 4.8mm
0.5mm
.07"
.57" 14.5mm
1.78mm
.47" 11.9mm .06" 1.5mm .05"
.08" 2.0mm
page
.31" 7.9mm
.19" 4.7mm
Chisel Bent 30° .06” (1.5mm)
Chisel 30° .05” (1.3mm)
.86" 21.8mm
0.4mm
S T T C -X 9 9
S T T C -X 4 1
1.3mm
.016"
.08" 2.03mm
Fo r use wi th r o b o ti c ap p l i c ati o ns an d M X-R M5E o r M X- RM8 E hand les on ly. Similar to STTC tip ca r tridg es,
S T T C -X 1 1
c o m p ati b l e wi th the MX-R M3E han dle .
ho wever, S TR C Ro b o ti c Ti p Car tr i dg es have a shaf t le n gt h of 3 .15 ” (8 0 mm) an d, th erefore, are no t
Conical .02” (0.5mm)
.30" 7.6mm
Conical Grooved .08” (2.0mm)
.70" 17.8mm
08 .07"
.39" 9.9mm
1.78mm
S T T C -X 3 2 Conical Sharp .07” (1.78mm)
.39" 9.9mm
1.78mm
S T T C -X 8 3
S T T C -X 2 6 Sharp Bent 30° .016” (0.4mm)
S T T C -X 1 4
.04"
Chisel 30º .10” (2.5mm)
2.5mm
600 SERIES X=0
700 SERIES X=7
.46" 11.7mm
.07"
30°
Chisel 30º .04” (1.0mm)
1.0mm
Fo r use i n l o w tem p er atur e p l astic bo ndi ng appl i cati on s, t hes e al u min u m t ips can be u sed w it h all avai l ab l e MX handl es.
4.83mm
Bevel 60° .07” (1.78mm)
11.43mm
.19"
PTTB-501
2.0mm
.19"
.45"
Bonding Tip
.08" 2.0mm
.03" .76mm
.08"
PTTB-503
11.43mm 4.8mm
Bonding Tip
page 09
S T T C -X 0 5 Bevel 30° .07” (1.78mm)
S R T C -X 2 5
.36" 9.1mm
PTTB BONDING TIP CARTRIDGES
.45"
.56" 14.2mm
Chisel 30º .06” (1.5mm)
800 SERIES X=8, WHEN FOLLOWED BY AN *
Bevel 45º .08” (2.03mm)
Bevel 30° .07” (1.78mm)
S R T C -X 3 8
.39" 9.9mm
1.5mm
S R T C -X 3 6
.39" 9.9mm
.10"
.06"
Chisel 90º .12” (3.0mm)
3.0mm
Chisel 30º .07” (1.78mm)
1.78mm
S R T C -X 1 3
.19" 4.8mm
S R T C -X 3 7
.39" 9.9mm
.07"
Extra L arge Chisel .20” (5.0mm)
Conical .02” (0.5mm)
S T T C -X 4 7
60° .07" 1.78mm
1.78mm
S R T C -X 1 7 *
.20" 5.0mm
S T T C -X 1 6
S T T C -X 3 5
30° .07"
800 SERIES X=8, WHEN FOLLOWED BY AN *
Conical .08” (2.03mm)
Sharp Bent 30º .02” (0.5mm)
0.5mm
Chisel Bent 30º .07” (1.78mm)
700 SERIES X=1
SRTC ROBOTIC TIP C ARTRIDGES
S T T C -X 4 4
.02"
S T T C -X 9 8 .39" 9.9mm
600 SERIES X=0
S T T C -X 1 2
.17" .08" 4.3mm
S T T C -X 4 2
Heat Staking .19” (4.8mm)
S T T C -X 9 7
.12" .63" 16.0mm
S T T C -X 7 0
Bevel 30° .04” (1.0mm)
Conical Sharp .02” (0.5mm)
Chisel 90° .07” (1.78mm)
1.78mm
Conical Sharp .04” (1.0mm)
1.0mm
Chisel 90° .10” (2.5mm)
2.5mm
.07"
S T T C -X 0 3 *
S T T C -X 2 4
S T T C -X 3 1
.39" 9.9mm
.04"
Long Reach Chisel 12° .15” (3.8mm)
.10"
Conical Sharp .04” (1.0mm)
1.0mm
S T T C -X 2 0
.85" 21.6mm
.04” (1.0mm)
S T T C -X 0 1
.53" 13.5mm
.04"
L arge Chisel .20” (5.0mm)
.20" 5.0mm
MX Tips
.19" 4.8mm
.07"
11.43mm .45"
PTTB-502
12.7mm
.08"
PTTB-504
8.4mm .33"
.50"
Bonding Tip .09"
2.3mm
1.8mm 2.0mm
.25" 6.4mm
Bonding Tip
MX 500
22/11/01
MX Tips
2:26 pm
Page 18
S MTC
S TD C
SMT Rework Tip Car tridges
De s ol d e r i n g S y s te m Tip C ar tr id g es
D ependi ng o n a va i l a b l e a c c es s , c h o o se o n e o f t wo d eso l d eri n g t i p c a r t r i d g e c o n fi g u r a t i o n s :
De s i g n e d fo r r e w o r k i n g S M T c o mp o n e n ts , S M TC t i p c a r t r i d g e s d o i t a ll – a s sem bly, remo va l a nd
s ta nda rd S T D C o r l o ng rea c h S T D C . L i ke a l l M et c a l t i p c a r t ri d g es, S TDC c h a n g e o v e r t a ke s j u s t a fe w
c l e a n i n g . T h e S M TC r a n g e i n c l u d e s s l o t, t un n e l an d q ua d ti p c a r t rid g es. T h e SM TC ra n ge a lso
s ec o nds . When des o l deri ng thro ugh -h o l e c o m p o n en t s, o n t h erm a l l y d em a n d i n g P C B s , a l w a y s u s e
i n c l u d e s h o o f t i p s fo r d r a g s o l d e r i n g , b l a de t i p s t o r e m ov e r e s i d ua l s old er fro m pa ds , a nd kn ife tips
the c o rrec t geo m etr y fo r the ta s k . T h i s m a y m ea n c h o o si n g a n 8 0 0 seri es (h i g h t e m p e r a t u r e ) t i p .
fo r m u l t i -l e a d s o l d e r i n g o f P L C C s i n ti g ht p l a c e s .
STANDARD TIP CARTRIDGES
P l e a s e n o t e : S M TC s o l d e r i n g ti p c a r t r i d g e s a r e f or u s e w i th t he M X-R M3E s o ld ering/ rewo rk ha nd -
MX Tips
DIAMETERS IN INCHES (mm) Part No.
A
STDC-X 02 STDC-X 03 STDC-X 04 STDC-X 05 STDC-X 06 STDC-X 07
.025 .030 .040 .050 .060 .095
600 SERIES X=0
(0.64) (0.76) (1.02) (1.27) (1.52) (2.41)
700 SERIES X=1
.055 .066 .070 .080 .090 .125
(1.40) (1.68) (1.78) (2.03) (2.29) (3.18)
p i e c e s fo r S T S S /M X s y s t e m s o nl y. T h e y c an n o t b e u s e d wi t h S P s y s tems , Talo n ® ha n d- pieces o r
Standard
B
B
d e s o l d e r h a n d -p i e c e s .
Long Reach
A 0.400"
800 SERIES X=8
LONG REACH TIP CARTRIDGES Part No.
A
STDC-X 03L STDC-X 04L STDC-X 05L
.030 (0.76) .040 (1.02) .050 (1.27)
700 SERIES X=7
B
.066 (1.68) .070 (1.79) .080 (2.03)
800 SERIES X=8
TATC
Ta l on Ti p C a r tr id g e s ®
D es i gned fo r the rem o va l o f a l l di s c ret e a n d S O sy m m et ri c a l c o m p o n en t s. TATC t i p c a r t r i d g e s fo r Ta lo n
®
10
D A
SLOT TIP CARTRIDGES
ha nd- pi ec es a re a l wa y s s o l d i n p a i rs. Du e t o i t s sh a p e a n d d esi g n , b y s i m p l y r o t a t i n g t h e
®
page
B
Ta lo n , a s i ngl e TATC c a r tri dge c a n rem o ve a 2 8 p i n S OIC , a t a n t a l u m o r a n 0 6 0 3 c h i p c a p a c i t o r
SMT TYPE
wi tho ut c ha ngi ng ti p s . M etc a l ’s new V i p er Ti p i s sh o wn i n t h e m a i n p h o t o g r a p h b e l o w.
Chip 0805 Chip 1206, 1210 Chip 1808, 1812 Chip, Box A (EIA SOPM-3224) Chip, Box B (EIA SOPM-3528) Melf, Box B (EIA SOPM-4532) Chip, Box C (EIA SOPM-6032) Chip, Box D (EIA SOPM-7246) SOT-23 SOT-89 Chip 0402, 0603, 0805 (angled) Chip 0402, 0603
Part No.
Description
TATC-X01 TATC-X02 TATC-X03 TATC-X04 TATC-X05 TATC-X06 TATC-X08
Fine Point Tip .20” (5.08mm) Blades Tip .25” (6.35mm) Blades Tip .62” (5.75mm) Blades Tip .81” (20.57mm) TSOP 32 Tip Blades Tip 1.1” (27.94mm) Angled Viper Tip .05” (1.27mm)
500 SERIES X=5
600 SERIES X=6
500 SERIES X=5
A .090 .140 .190 .135 .150 .190 .250 .300 .068 .110 .080 .070
600 SERIES X=0
DIMENSIONS IN INCHES (mm) B D
(2.29) (3.56) (4.83) (3.43) (3.81) (4.83) (6.35) (7.62) (1.73) (2.80) (2.03) (1.78)
.050 .060 .080 .080 .095 .110 .095 .100 .100 .250 .050 .040
(1.27) (1.52) (2.03) (2.03) (2.41) (2.79) (2.41) (2.54) (2.54) (6.35) (1.27) (1.02)
700 SERIES X=1
.070 .070 .075 .120 .100 .160 .130 .140 .050 .080 .060 .040
(1.79) (1.79) (1.91) (3.05) (2.54) (4.06) (3.30) (3.56) (1.27) (2.03) (1.52) (1.02)
Part No. SMTC-X 01 SMTC-X 02 SMTC-X 03 SMTC-X 35 SMTC-X 32 SMTC-X 36 SMTC-X 33* SMTC-X 34* SMTC-X 05 SMTC-X 08 SMTC-X88 SMTC-X96
* = N O T A VA I L A B L E F O R 5 0 0 S E R I E S
page 11
MX 500
22/11/01
MX Tips
2:26 pm
Page 18
S MTC
S TD C
SMT Rework Tip Car tridges
De s ol d e r i n g S y s te m Tip C ar tr id g es
D ependi ng o n a va i l a b l e a c c es s , c h o o se o n e o f t wo d eso l d eri n g t i p c a r t r i d g e c o n fi g u r a t i o n s :
De s i g n e d fo r r e w o r k i n g S M T c o mp o n e n ts , S M TC t i p c a r t r i d g e s d o i t a ll – a s sem bly, remo va l a nd
s ta nda rd S T D C o r l o ng rea c h S T D C . L i ke a l l M et c a l t i p c a r t ri d g es, S TDC c h a n g e o v e r t a ke s j u s t a fe w
c l e a n i n g . T h e S M TC r a n g e i n c l u d e s s l o t, t un n e l an d q ua d ti p c a r t rid g es. T h e SM TC ra n ge a lso
s ec o nds . When des o l deri ng thro ugh -h o l e c o m p o n en t s, o n t h erm a l l y d em a n d i n g P C B s , a l w a y s u s e
i n c l u d e s h o o f t i p s fo r d r a g s o l d e r i n g , b l a de t i p s t o r e m ov e r e s i d ua l s old er fro m pa ds , a nd kn ife tips
the c o rrec t geo m etr y fo r the ta s k . T h i s m a y m ea n c h o o si n g a n 8 0 0 seri es (h i g h t e m p e r a t u r e ) t i p .
fo r m u l t i -l e a d s o l d e r i n g o f P L C C s i n ti g ht p l a c e s .
STANDARD TIP CARTRIDGES
P l e a s e n o t e : S M TC s o l d e r i n g ti p c a r t r i d g e s a r e f or u s e w i th t he M X-R M3E s o ld ering/ rewo rk ha nd -
MX Tips
DIAMETERS IN INCHES (mm) Part No.
A
STDC-X 02 STDC-X 03 STDC-X 04 STDC-X 05 STDC-X 06 STDC-X 07
.025 .030 .040 .050 .060 .095
600 SERIES X=0
(0.64) (0.76) (1.02) (1.27) (1.52) (2.41)
700 SERIES X=1
.055 .066 .070 .080 .090 .125
(1.40) (1.68) (1.78) (2.03) (2.29) (3.18)
p i e c e s fo r S T S S /M X s y s t e m s o nl y. T h e y c an n o t b e u s e d wi t h S P s y s tems , Talo n ® ha n d- pieces o r
Standard
B
B
d e s o l d e r h a n d -p i e c e s .
Long Reach
A 0.400"
800 SERIES X=8
LONG REACH TIP CARTRIDGES Part No.
A
STDC-X 03L STDC-X 04L STDC-X 05L
.030 (0.76) .040 (1.02) .050 (1.27)
700 SERIES X=7
B
.066 (1.68) .070 (1.79) .080 (2.03)
800 SERIES X=8
TATC
Ta l on Ti p C a r tr id g e s ®
D es i gned fo r the rem o va l o f a l l di s c ret e a n d S O sy m m et ri c a l c o m p o n en t s. TATC t i p c a r t r i d g e s fo r Ta lo n
®
10
D A
SLOT TIP CARTRIDGES
ha nd- pi ec es a re a l wa y s s o l d i n p a i rs. Du e t o i t s sh a p e a n d d esi g n , b y s i m p l y r o t a t i n g t h e
®
page
B
Ta lo n , a s i ngl e TATC c a r tri dge c a n rem o ve a 2 8 p i n S OIC , a t a n t a l u m o r a n 0 6 0 3 c h i p c a p a c i t o r
SMT TYPE
wi tho ut c ha ngi ng ti p s . M etc a l ’s new V i p er Ti p i s sh o wn i n t h e m a i n p h o t o g r a p h b e l o w.
Chip 0805 Chip 1206, 1210 Chip 1808, 1812 Chip, Box A (EIA SOPM-3224) Chip, Box B (EIA SOPM-3528) Melf, Box B (EIA SOPM-4532) Chip, Box C (EIA SOPM-6032) Chip, Box D (EIA SOPM-7246) SOT-23 SOT-89 Chip 0402, 0603, 0805 (angled) Chip 0402, 0603
Part No.
Description
TATC-X01 TATC-X02 TATC-X03 TATC-X04 TATC-X05 TATC-X06 TATC-X08
Fine Point Tip .20” (5.08mm) Blades Tip .25” (6.35mm) Blades Tip .62” (5.75mm) Blades Tip .81” (20.57mm) TSOP 32 Tip Blades Tip 1.1” (27.94mm) Angled Viper Tip .05” (1.27mm)
500 SERIES X=5
600 SERIES X=6
500 SERIES X=5
A .090 .140 .190 .135 .150 .190 .250 .300 .068 .110 .080 .070
600 SERIES X=0
DIMENSIONS IN INCHES (mm) B D
(2.29) (3.56) (4.83) (3.43) (3.81) (4.83) (6.35) (7.62) (1.73) (2.80) (2.03) (1.78)
.050 .060 .080 .080 .095 .110 .095 .100 .100 .250 .050 .040
(1.27) (1.52) (2.03) (2.03) (2.41) (2.79) (2.41) (2.54) (2.54) (6.35) (1.27) (1.02)
700 SERIES X=1
.070 .070 .075 .120 .100 .160 .130 .140 .050 .080 .060 .040
(1.79) (1.79) (1.91) (3.05) (2.54) (4.06) (3.30) (3.56) (1.27) (2.03) (1.52) (1.02)
Part No. SMTC-X 01 SMTC-X 02 SMTC-X 03 SMTC-X 35 SMTC-X 32 SMTC-X 36 SMTC-X 33* SMTC-X 34* SMTC-X 05 SMTC-X 08 SMTC-X88 SMTC-X96
* = N O T A VA I L A B L E F O R 5 0 0 S E R I E S
page 11
MX 500
22/11/01
2:26 pm
Page 20
B D
B2
B D
MX Tips
MX Tips A
A A2
A2
TUNNEL TIP CARTRIDGES FOR DUAL IN-LINE PACKAGES
SMT TYPE
DIMENSIONS IN INCHES (mm) A B
A2
DPAC SO-8 SO-16 SO-8 SOIC-8 SOIC-14,-16 SOIC-14 SOIC-24 (Mini flat pack) SOIC-16 (Wide) SOIC-20 SOIC-24 SOIC-28, SOL-34 SOIC-32 SOJ-28, SOM-36 SOJ-32, 34 SOJ-40, SOM-32 SOJ-42 SOMC-14,-16, DB-20 SOP-20 SOP-28 SOP-40 SOP-44 TSOP-28 TSOP-40 TSOP-56 TSOP-32
.335 .320 .330 .335 .200 .200 .204 .280 .320 .375 .375 .375 .520 .315 .315 .410 .410 .270 .270 .420 .460 .510 .470 .730 .730 .730
QUAD TIP CARTRIDGES FOR QFP
(8.51) (8.13) (8.38) (8.51) (5.08) (5.08) (5.18) (7.11) (8.13) (9.53) (9.53) (9.53) (13.21) (8.00) (8.00) (10.41) (10.41) (6.86) (6.86) (10.67) (11.68) (12.95) (11.94) (18.54) (18.54) (18.54)
.335 .380 .330 .335 .200 .200 .204 .280 .320 .375 .375 .375 .520 .340 .340 .450 .450 .270 .270 .420 .510 .565 .505 .760 .760 .760
600 SERIES X=0 700 SERIES X=1 * * = N O T A VA I L A B L E F O R 7 0 0 S E R I E S
(8.51) (9.65) (8.38) (8.51) (5.08 (5.08) (5.18) (7.11) (8.13) (9.53) (9.53) (9.53) (13.21) (8.64) (8.64) (11.43) (11.43) (6.86) (6.86) (10.67) (12.95) (14.35) (12.83) (19.30) (19.30) (19.30)
.250 .750 .475 .665 .170 .400 .350 .620 .470 .520 .620 .720 .805 .740 .840 1.020 1.070 .440 .285 .720 1.000 1.070 .320 .400 .556 .320
(6.35) (19.05) (12.07) (16.90) (4.32) (10.16) (8.89) (15.75) (11.94) (13.21) (15.75) (18.29) (20.45) (18.80) (21.34) (25.91) (27.18) (11.18) (7.24) (18.29) (25.4) (27.18) (8.13) (10.16) (14.12) (8.13)
.200 .240 .230 .250 .090 .090 .100 .125 .270 .125 .125 .125 .170 .074 .125 .075 .125 .090 .100 .125 .125 .105 .065 .120 .120 .120
D
Part No.
SMT TYPE
(5.08) (6.10) (5.84) (6.35) (2.29) (2.29) (2.54) (3.18) (6.86) (3.18) (3.18) (3.18) (4.32) (1.88) (3.18) (1.91) (3.18) (2.29) (2.54) (3.18) (3.18) (2.67) (1.65) (3.05) (3.05) (3.05)
SMTC-X 47 SMTC-X 107 SMTC-X 46* SMTC-X 68** SMTC-X 04 SMTC-X 06 SMTC-X 142 SMTC-X 77 SMTC-X 124 SMTC-X 10 SMTC-X 09 SMTC-X 07 SMTC-X 42 SMTC-X 26 SMTC-X 140 SMTC-X 40 SMTC-X 148 SMTC-X 20 SMTC-X 138 SMTC-X 39 SMTC-X 134* SMTC-X 83 SMTC-X 95 SMTC-X 154 SMTC-X 162 SMTC-X84**
SQFP 48 (EIAJ) SQFP 64 (EIAJ) TQFP 44 TQFP 80 QFP 48 VQFP 100 (EIAJ) QFP 128 (3.2 mm fp) QFP 44 QFP 100 (rectangular) QFP 64, 80 QFP 100 QFP 144 QFP 132 QFP 100 (square) QFP 208 DUAL• QFP 120,160 DUAL• PQFP 240 DUAL• QFP 304 DUAL•
DIMENSIONS IN INCHES (mm) A B B2
A2 .330 .440 .440 .485 .550 .570 .620 .635 .650 .675 .805 .805 .985 1.040 1.125 1.165 1.290 1.600
(8.38) (11.18) (11.18) (12.32) (13.97) (14.48) (15.75) (16.13) (16.51) (17.15) (20.45) (20.45) (25.02) (26.42) (28.58) (29.59) (32.77) (40.64)
.330 .440 .480 .525 .550 .610 .620 .635 .650 .675 .805 .840 1.020 1.040 1.770 1.200 1.330 1.650
600 SERIES X=0 700 SERIES X=1 *= NOT RECOMMENDED FOR 600 SERIES
(8.38) (11.18) (12.19) (13.34) (13.97) (15.49) (15.75) (16.13) (16.51) (17.15) (20.45) (21.34) (25.91) (26.42) (44.96) (30.48) (33.78) (41.91)
.330 .440 .480 .485 .550 .570 .860 .635 .885 .910 .805 .805 .985 1.040 1.125 1.165 1.290 1.650
(8.38) (11.18) (12.19) (12.32) (13.97) (14.48) (21.84) (16.13) (22.48) (23.11) (20.45) (20.45) (25.02) (26.42) (28.58) (29.59) (32.77) (41.91)
.330 .440 .520 .525 .550 .610 .860 .635 .885 .910 .805 .840 1.020 1.040 1.170 1.200 1.330 1.600
(8.38) (11.18) (13.21) (13.34) (13.97) (15.49) (21.84) (16.13) (22.48) (23.11) (20.45) (21.34) (25.91) (26.42) (44.96) (30.48) (33.78) (40.64)
D
Part No.
(2.54) (2.54) (2.79) (2.79) (3.30) (2.79) (3.30) (3.30) (3.30) (3.30) (4.83) (1.91) (3.18) (3.30) (2.90) (3.05) (2.79) (5.08)
SMTC-X 121 SMTC-X 120 SMTC-X 159 SMTC-X 132 SMTC-X 115 SMTC-X 118 SMTC-X 133 SMTC-X 21 SMTC-X 43 SMTC-X 15 SMTC-X 45* SMTC-X 122 SMTC-X 86 SMTC-X 44* SMTC-X 81 SMTC-X 48 SMTC-X 125 SMTC-X 158**
.100 .100 .110 .110 .130 .110 .130 .130 .130 .130 .190 .075 .125 .130 .114 .120 .110 .200
FOR ALL QUADS USE 700 SERIES TIP C ARTRIDGES **= NOT AVAILABLE FOR 600 SERIES
Please Note: •Dual tip cartridges require two power supply units and two hand-pieces. A Dual Hand-Piece Support (MX-DHS) is also recommended.
* = N O T A VA I L A B L E F O R 6 0 0 S E R I E S B D
B2
A A2
QUAD TIP CARTRIDGES FOR PLCC SMT TYPE
B
A2
A
B2
B
D
Part No.
(3.81) (3.81) (3.81) (3.81) (3.81) (3.81) (5.59) (5.59) (5.59) (3.81) (5.59)
SMTC-X 11 SMTC-X 12 SMTC-X 103 SMTC-X 16 SMTC-X 13 SMTC-X 14 SMTC-X 18* SMTC-X 28 SMTC-X 29 SMTC-X 17* SMTC-X 19*
D
A
page
PLCC PLCC PLCC PLCC PLCC PLCC PLCC PLCC PLCC PLCC PLCC
18 20 28 32 28 44 68 68 dual• 84 dual• 52 84
.300 .360 .370 .450 .455 .660 .960 .960 1.165 .760 1.165
(7.62) (9.14) (9.40) (11.43) (11.56) (16.76) (24.38) (24.38) (29.59) (19.30) (29.59)
.330 .400 .410 .500 .500 .700 .995 .995 1.195 .800 1.195
(8.38) (10.16) (10.41) (12.70) (12.70) (17.78) (25.27) (25.27) (30.35) (20.32) (30.35)
.500 .360 .570 .550 .455 .660 .960 .960 1.165 .760 1.165
(12.70) (9.14) (14.48) (13.97) (11.58) (16.76) (24.38) (24.38) (29.59) (19.30) (29.59)
.530 .400 .610 .600 .500 .700 .995 .995 1.195 .800 1.195
(13.46) (10.16) (15.49) (15.24) (12.70) (17.78) (25.27) (25.27) (30.35) (20.32) (30.35)
.150 .150 .150 .150 .150 .150 .220 .220 .220 .150 .220
SOCKET TIP CARTRIDGES (TIP INSIDE SOCKET)
SMD COMPONENT
A
PLCC-20 SOCKET PLCC-32 SOCKET PLCC-84 SOCKET DUAL•
.360 (9.14) .456 (11.58) 1.160 (40.64)
B .360 (9.14) .556 (14.12) 1.160 (40.64)
D .115 (2.91) .120 (3.05) .115 (2.91)
Part No. SMTC-X144 SMTC-X109 SMTC-X145
Recommended Part No. SMTC-1144 SMTC-1109 SMTC-1145
page 13
12 600 SERIES X=0 700 SERIES X=1 * = N O T A VA I L A B L E F O R 6 0 0 S E R I E S
FOR ALL QUADS USE 700 SERIES TIP C ARTRIDGES
Please note: •Dual tip cartridges require two power supply units and two hand-pieces. A Dual Hand-Piece Support (MX-DHS) is also recommended.
600 SERIES X=0
700 SERIES X=1
FOR ALL QUADS USE 700 SERIES TIP C ARTRIDGES
Please Note: •Dual tip cartridges require two power supply units and two hand-pieces. A Dual Hand-Piece Support (MX-DHS) is also recommended.
MX 500
22/11/01
2:26 pm
Page 20
B D
B2
B D
MX Tips
MX Tips A
A A2
A2
TUNNEL TIP CARTRIDGES FOR DUAL IN-LINE PACKAGES
SMT TYPE
DIMENSIONS IN INCHES (mm) A B
A2
DPAC SO-8 SO-16 SO-8 SOIC-8 SOIC-14,-16 SOIC-14 SOIC-24 (Mini flat pack) SOIC-16 (Wide) SOIC-20 SOIC-24 SOIC-28, SOL-34 SOIC-32 SOJ-28, SOM-36 SOJ-32, 34 SOJ-40, SOM-32 SOJ-42 SOMC-14,-16, DB-20 SOP-20 SOP-28 SOP-40 SOP-44 TSOP-28 TSOP-40 TSOP-56 TSOP-32
.335 .320 .330 .335 .200 .200 .204 .280 .320 .375 .375 .375 .520 .315 .315 .410 .410 .270 .270 .420 .460 .510 .470 .730 .730 .730
QUAD TIP CARTRIDGES FOR QFP
(8.51) (8.13) (8.38) (8.51) (5.08) (5.08) (5.18) (7.11) (8.13) (9.53) (9.53) (9.53) (13.21) (8.00) (8.00) (10.41) (10.41) (6.86) (6.86) (10.67) (11.68) (12.95) (11.94) (18.54) (18.54) (18.54)
.335 .380 .330 .335 .200 .200 .204 .280 .320 .375 .375 .375 .520 .340 .340 .450 .450 .270 .270 .420 .510 .565 .505 .760 .760 .760
600 SERIES X=0 700 SERIES X=1 * * = N O T A VA I L A B L E F O R 7 0 0 S E R I E S
(8.51) (9.65) (8.38) (8.51) (5.08 (5.08) (5.18) (7.11) (8.13) (9.53) (9.53) (9.53) (13.21) (8.64) (8.64) (11.43) (11.43) (6.86) (6.86) (10.67) (12.95) (14.35) (12.83) (19.30) (19.30) (19.30)
.250 .750 .475 .665 .170 .400 .350 .620 .470 .520 .620 .720 .805 .740 .840 1.020 1.070 .440 .285 .720 1.000 1.070 .320 .400 .556 .320
(6.35) (19.05) (12.07) (16.90) (4.32) (10.16) (8.89) (15.75) (11.94) (13.21) (15.75) (18.29) (20.45) (18.80) (21.34) (25.91) (27.18) (11.18) (7.24) (18.29) (25.4) (27.18) (8.13) (10.16) (14.12) (8.13)
.200 .240 .230 .250 .090 .090 .100 .125 .270 .125 .125 .125 .170 .074 .125 .075 .125 .090 .100 .125 .125 .105 .065 .120 .120 .120
D
Part No.
SMT TYPE
(5.08) (6.10) (5.84) (6.35) (2.29) (2.29) (2.54) (3.18) (6.86) (3.18) (3.18) (3.18) (4.32) (1.88) (3.18) (1.91) (3.18) (2.29) (2.54) (3.18) (3.18) (2.67) (1.65) (3.05) (3.05) (3.05)
SMTC-X 47 SMTC-X 107 SMTC-X 46* SMTC-X 68** SMTC-X 04 SMTC-X 06 SMTC-X 142 SMTC-X 77 SMTC-X 124 SMTC-X 10 SMTC-X 09 SMTC-X 07 SMTC-X 42 SMTC-X 26 SMTC-X 140 SMTC-X 40 SMTC-X 148 SMTC-X 20 SMTC-X 138 SMTC-X 39 SMTC-X 134* SMTC-X 83 SMTC-X 95 SMTC-X 154 SMTC-X 162 SMTC-X84**
SQFP 48 (EIAJ) SQFP 64 (EIAJ) TQFP 44 TQFP 80 QFP 48 VQFP 100 (EIAJ) QFP 128 (3.2 mm fp) QFP 44 QFP 100 (rectangular) QFP 64, 80 QFP 100 QFP 144 QFP 132 QFP 100 (square) QFP 208 DUAL• QFP 120,160 DUAL• PQFP 240 DUAL• QFP 304 DUAL•
DIMENSIONS IN INCHES (mm) A B B2
A2 .330 .440 .440 .485 .550 .570 .620 .635 .650 .675 .805 .805 .985 1.040 1.125 1.165 1.290 1.600
(8.38) (11.18) (11.18) (12.32) (13.97) (14.48) (15.75) (16.13) (16.51) (17.15) (20.45) (20.45) (25.02) (26.42) (28.58) (29.59) (32.77) (40.64)
.330 .440 .480 .525 .550 .610 .620 .635 .650 .675 .805 .840 1.020 1.040 1.770 1.200 1.330 1.650
600 SERIES X=0 700 SERIES X=1 *= NOT RECOMMENDED FOR 600 SERIES
(8.38) (11.18) (12.19) (13.34) (13.97) (15.49) (15.75) (16.13) (16.51) (17.15) (20.45) (21.34) (25.91) (26.42) (44.96) (30.48) (33.78) (41.91)
.330 .440 .480 .485 .550 .570 .860 .635 .885 .910 .805 .805 .985 1.040 1.125 1.165 1.290 1.650
(8.38) (11.18) (12.19) (12.32) (13.97) (14.48) (21.84) (16.13) (22.48) (23.11) (20.45) (20.45) (25.02) (26.42) (28.58) (29.59) (32.77) (41.91)
.330 .440 .520 .525 .550 .610 .860 .635 .885 .910 .805 .840 1.020 1.040 1.170 1.200 1.330 1.600
(8.38) (11.18) (13.21) (13.34) (13.97) (15.49) (21.84) (16.13) (22.48) (23.11) (20.45) (21.34) (25.91) (26.42) (44.96) (30.48) (33.78) (40.64)
D
Part No.
(2.54) (2.54) (2.79) (2.79) (3.30) (2.79) (3.30) (3.30) (3.30) (3.30) (4.83) (1.91) (3.18) (3.30) (2.90) (3.05) (2.79) (5.08)
SMTC-X 121 SMTC-X 120 SMTC-X 159 SMTC-X 132 SMTC-X 115 SMTC-X 118 SMTC-X 133 SMTC-X 21 SMTC-X 43 SMTC-X 15 SMTC-X 45* SMTC-X 122 SMTC-X 86 SMTC-X 44* SMTC-X 81 SMTC-X 48 SMTC-X 125 SMTC-X 158**
.100 .100 .110 .110 .130 .110 .130 .130 .130 .130 .190 .075 .125 .130 .114 .120 .110 .200
FOR ALL QUADS USE 700 SERIES TIP C ARTRIDGES **= NOT AVAILABLE FOR 600 SERIES
Please Note: •Dual tip cartridges require two power supply units and two hand-pieces. A Dual Hand-Piece Support (MX-DHS) is also recommended.
* = N O T A VA I L A B L E F O R 6 0 0 S E R I E S B D
B2
A A2
QUAD TIP CARTRIDGES FOR PLCC SMT TYPE
B
A2
A
B2
B
D
Part No.
(3.81) (3.81) (3.81) (3.81) (3.81) (3.81) (5.59) (5.59) (5.59) (3.81) (5.59)
SMTC-X 11 SMTC-X 12 SMTC-X 103 SMTC-X 16 SMTC-X 13 SMTC-X 14 SMTC-X 18* SMTC-X 28 SMTC-X 29 SMTC-X 17* SMTC-X 19*
D
A
page
PLCC PLCC PLCC PLCC PLCC PLCC PLCC PLCC PLCC PLCC PLCC
18 20 28 32 28 44 68 68 dual• 84 dual• 52 84
.300 .360 .370 .450 .455 .660 .960 .960 1.165 .760 1.165
(7.62) (9.14) (9.40) (11.43) (11.56) (16.76) (24.38) (24.38) (29.59) (19.30) (29.59)
.330 .400 .410 .500 .500 .700 .995 .995 1.195 .800 1.195
(8.38) (10.16) (10.41) (12.70) (12.70) (17.78) (25.27) (25.27) (30.35) (20.32) (30.35)
.500 .360 .570 .550 .455 .660 .960 .960 1.165 .760 1.165
(12.70) (9.14) (14.48) (13.97) (11.58) (16.76) (24.38) (24.38) (29.59) (19.30) (29.59)
.530 .400 .610 .600 .500 .700 .995 .995 1.195 .800 1.195
(13.46) (10.16) (15.49) (15.24) (12.70) (17.78) (25.27) (25.27) (30.35) (20.32) (30.35)
.150 .150 .150 .150 .150 .150 .220 .220 .220 .150 .220
SOCKET TIP CARTRIDGES (TIP INSIDE SOCKET)
SMD COMPONENT
A
PLCC-20 SOCKET PLCC-32 SOCKET PLCC-84 SOCKET DUAL•
.360 (9.14) .456 (11.58) 1.160 (40.64)
B .360 (9.14) .556 (14.12) 1.160 (40.64)
D .115 (2.91) .120 (3.05) .115 (2.91)
Part No. SMTC-X144 SMTC-X109 SMTC-X145
Recommended Part No. SMTC-1144 SMTC-1109 SMTC-1145
page 13
12 600 SERIES X=0 700 SERIES X=1 * = N O T A VA I L A B L E F O R 6 0 0 S E R I E S
FOR ALL QUADS USE 700 SERIES TIP C ARTRIDGES
Please note: •Dual tip cartridges require two power supply units and two hand-pieces. A Dual Hand-Piece Support (MX-DHS) is also recommended.
600 SERIES X=0
700 SERIES X=1
FOR ALL QUADS USE 700 SERIES TIP C ARTRIDGES
Please Note: •Dual tip cartridges require two power supply units and two hand-pieces. A Dual Hand-Piece Support (MX-DHS) is also recommended.
page 14
page 14
MX 500
22/11/01
2:27 pm
Page 24
MX- 50 0
MX-500
A c c e s s or ie s & S p a r e Par ts
DESOLDERING ACCESSORIES
Q
Q
R
R S T U V W X Y
T
U
V
W
Y S
X
HAND-PIECES AND CORDS A
Part No.
MX-DCF1 MX-DCF1L MX-DCF1F MX-DAR1 AC-TC-P AC-CB1-P AC-CB2-P MX-DVC1 MX-DSL1 MX-DSL2 MX-DSB
DS1 Filter Pack: 15 chamber liners, 6 fume filters DS1 Chamber Liners (Pack of 40)** DS1 Fume Filters (Pack of 20)** Air Regulator and Filter with Fittings Desolder Tip Cleaner (Pack of 12) Desolder Chamber Cleaning Brush (Pack of 25) Desolder Tube Cleaning Brush (Pack of 6) Venturi Cartridge for Desolder Gun DS1 Chamber Seal DS1 Cartridge Seal Desolder Gun Swivel Bushing
MX-500
Description
D B
A B C D E F
E C F
MX-RM3E MX-RM6E MX-TALON MX-DS1 MX-RM8E MX-DAH4 MX-RM5E
ESD Solder Handle W/CP2 for MX-500 Systems ESD Long Reach Solder Handle W/CP2 for MX-500 Talon® Hand-Piece with Cord Desolder Hand-Piece DS1 Desolder Cord ESD Air Hose, U.S standard fitting Standard Robotic Cable, 1-piece, 6’ (1.83m)**
BB AA
DESOLDERING MAINTENANCE KIT CC
DD EE
Z
MX-DMK1
DS1 Maintenance Kit
INCLUDES Z AA BB MX-DSB CC DD MX-DLA EE FF GG MX-DSL2 HH II JJ MX-DSL1 KK MX-DUC
Long Phillips Screws (Pack of 2)*** Short Phillips Screws (Pack of 4)*** Desolder Gun Swivel Bushing Hex Screws (Pack of 2)*** Desolder Gun Latch Adjustment (Pack of 10) Large Springs (Pack of 2)*** Nylon Screws (Pack of 2)*** DS1 Cartridge Seal (Pack of 2) Hinge Pins (Pack of 4)*** O-Rings (Pack of 2)*** DS1 Chamber Seal (Pack of 2) Small Springs (Pack of 6)*** DS1 Upper Chamber (Type II Desolder Tool only)**
GG FF
W O R K S TA N D I T E M S HH
H
II
G
I
G H I J
J
MX-WS5 MX-WS4 MX-WSC5 MX-WSC4 AC-YS1-P AC-YS3-P
DS1/Talon® Workstand with YS3 Sponge MX Workstand with YS3 Sponge Talon® Cradle MX-RM3E / 6E Cradle WS1 Sponge (1.7” x 2.7” x 1.0”) (Pack of 50)** MX, SP & DP Workstand Sponge (Pack of 50)**
JJ
KK
** Not shown *** Not sold separately
MISCELL ANEOUS ACCESSORIES OTHER SYSTEM COMPONENTS
K M
L
N
K L M N O P
AC-TSTAND AC-CP2 AC-BRUSH-P MX-DHS STSS-TEMPLATE AC-TCASE MX-FX2
Tip Stand Cartridge Removal Pad Soft Brass Brush Cleaner (Pack of 6) Dual Handle Support (use with dual heater SMTCs) SMTC Tip Selection Template Tip Case for STTC/SSC (holds 10 tips)* Fume Extraction Tube and Clamp**
O
page 16
POWER SUPPLY AND POWER METER
MX-500P-11 MX-500P-21 MX-NPM
Two Port 100/120 VAC Power Supply Two Port 220/240 VAC Power Supply* Net Power Meter
P
page * Tips not included ** Not shown
*220/240 VAC Power Supply does not include power cord.
17
MX 500
22/11/01
2:27 pm
Page 24
MX- 50 0
MX-500
A c c e s s or ie s & S p a r e Par ts
DESOLDERING ACCESSORIES
Q
Q
R
R S T U V W X Y
T
U
V
W
Y S
X
HAND-PIECES AND CORDS A
Part No.
MX-DCF1 MX-DCF1L MX-DCF1F MX-DAR1 AC-TC-P AC-CB1-P AC-CB2-P MX-DVC1 MX-DSL1 MX-DSL2 MX-DSB
DS1 Filter Pack: 15 chamber liners, 6 fume filters DS1 Chamber Liners (Pack of 40)** DS1 Fume Filters (Pack of 20)** Air Regulator and Filter with Fittings Desolder Tip Cleaner (Pack of 12) Desolder Chamber Cleaning Brush (Pack of 25) Desolder Tube Cleaning Brush (Pack of 6) Venturi Cartridge for Desolder Gun DS1 Chamber Seal DS1 Cartridge Seal Desolder Gun Swivel Bushing
MX-500
Description
D B
A B C D E F
E C F
MX-RM3E MX-RM6E MX-TALON MX-DS1 MX-RM8E MX-DAH4 MX-RM5E
ESD Solder Handle W/CP2 for MX-500 Systems ESD Long Reach Solder Handle W/CP2 for MX-500 Talon® Hand-Piece with Cord Desolder Hand-Piece DS1 Desolder Cord ESD Air Hose, U.S standard fitting Standard Robotic Cable, 1-piece, 6’ (1.83m)**
BB AA
DESOLDERING MAINTENANCE KIT CC
DD EE
Z
MX-DMK1
DS1 Maintenance Kit
INCLUDES Z AA BB MX-DSB CC DD MX-DLA EE FF GG MX-DSL2 HH II JJ MX-DSL1 KK MX-DUC
Long Phillips Screws (Pack of 2)*** Short Phillips Screws (Pack of 4)*** Desolder Gun Swivel Bushing Hex Screws (Pack of 2)*** Desolder Gun Latch Adjustment (Pack of 10) Large Springs (Pack of 2)*** Nylon Screws (Pack of 2)*** DS1 Cartridge Seal (Pack of 2) Hinge Pins (Pack of 4)*** O-Rings (Pack of 2)*** DS1 Chamber Seal (Pack of 2) Small Springs (Pack of 6)*** DS1 Upper Chamber (Type II Desolder Tool only)**
GG FF
W O R K S TA N D I T E M S HH
H
II
G
I
G H I J
J
MX-WS5 MX-WS4 MX-WSC5 MX-WSC4 AC-YS1-P AC-YS3-P
DS1/Talon® Workstand with YS3 Sponge MX Workstand with YS3 Sponge Talon® Cradle MX-RM3E / 6E Cradle WS1 Sponge (1.7” x 2.7” x 1.0”) (Pack of 50)** MX, SP & DP Workstand Sponge (Pack of 50)**
JJ
KK
** Not shown *** Not sold separately
MISCELL ANEOUS ACCESSORIES OTHER SYSTEM COMPONENTS
K M
L
N
K L M N O P
AC-TSTAND AC-CP2 AC-BRUSH-P MX-DHS STSS-TEMPLATE AC-TCASE MX-FX2
Tip Stand Cartridge Removal Pad Soft Brass Brush Cleaner (Pack of 6) Dual Handle Support (use with dual heater SMTCs) SMTC Tip Selection Template Tip Case for STTC/SSC (holds 10 tips)* Fume Extraction Tube and Clamp**
O
page 16
POWER SUPPLY AND POWER METER
MX-500P-11 MX-500P-21 MX-NPM
Two Port 100/120 VAC Power Supply Two Port 220/240 VAC Power Supply* Net Power Meter
P
page * Tips not included ** Not shown
*220/240 VAC Power Supply does not include power cord.
17
SP200 Soldering System
22/11/01
2:45 pm
Page 32
S P 20 0
SP200
S P200 S ol d e r in g S y s te m
T i p C a r t r i d g e s Fo r S o l d e r i n g A p p l i c a t i o n s The S P 200 S o l d e r i n g S y s t e m ’s tip c ar t rid ge s are de si gne d to su i t a wi de ran g e o f so ld erin g a pplicat ion s. SP200
Fo r o p ti m um p er f o r m anc e, o p er ato rs sh ou l d s ele c t t he t ip t hat al lo ws ma ximu m con ta ct wit h t he w ork sur f ac e. We suggest that yo u star t w ith a 600 se rie s ti p car tr idge.
SP200 SOLDER TIP CARTRIDGES
Economical Soldering System Cuts Costs, Not Corners S S C -X 1 7 A
T he S P 200 S o l deri ng S y s tem i s the m o st c o st -effec t i ve a n d ea si est t o u se c o m p a c t s o l d e r i n g s y s t e m .21" 5.3mm
a va i l a bl e to da y.
.40" 10mm
.30" 7.6mm
Fo r fl a wl es s s o l deri ng, tec hni c i a ns need o n l y sel ec t t h e c o rrec t t i p c a r t ri d g e, i n s e r t i t i n t o t h e h a n d -
no c a l i bra ti o n, o p era to rs a l wa y s a p p l y t h e c o rrec t l evel o f t h erm a l en erg y n e e d e d t o p r o d u c e s o l d e r j o i nts o f the hi ghes t qua l i ty wi tho ut ri sk i n g c o m p o n en t o r P C B d a m a g e. 3.0mm
.65" 16.5mm
I n a ddi ti o n, the s y s tem ’s des i gn i s ex t rem el y rel i a b l e, wi t h ver y few p a r t s t h a t e v e r n e e d r e p a i r i n g ,
M etc a l ’s S P 200 S o l deri ng S y s tem , fo r t h ro u g h -h o l e so l d eri n g a n d S M T t o u c h -u p , i s d e s i g n e d t o perfec tl y c o m pl em ent o ur M X- 500 S o l d eri n g , Deso l d eri n g & Rewo rk S y st em .
.39" 9.9mm .10" 2.5mm
.63" 16mm
.07"
.65" 16.5mm
System Includes Power Supply With Power Cord*, Hand-Piece With Cord, Workstand With Sponge And Cartidge Removal Pad
.40" 9.9mm .07"
Part No.
Description
SP200-11 SP200-21
115 VAC Soldering System 220/240 VAC Soldering System*
.06"
A C C E S S O R I E S & S PA R E PA R T S
page 18
Power Supply with Power Cord Power Supply with Power Cord* Cartridge Removal Pad Workstand Sponge (Pack of 50) Soft Brass Brush Cleaner (Pack of 6) Tip Case (holds 10 tips)** Tip Stand ESD Solder Handle W/CP2 for SP200 Systems O-Ring Replacement Kit SP Workstand with YS3 Sponge Universal Cradle
.40" 10mm
1.5mm
.43" 11mm
.04" 1.0mm
.73" 18.5mm
S S C -X 4 2 A
Long Chisel .07” (1.78mm)
.45" 11.4mm
.56" 14.2mm
S S C -X 3 8 A
.05"
Chisel 30º .06” (1.5mm)
S S C -X 2 5 A Chisel 30º .04” (1.0mm)
1.4mm .590" 15mm
.60" 15.2mm
1.0mm
Conical Sharp .055” (1.4mm)
S S C -X 0 1 A Conical Sharp .04” (1.0mm)
.70" 17.8mm
.64" 16.25mm
600 SERIES X=6
.18"45º 4.5mm
.70" 17.8mm
S S C -X 6 1 A
.64" 16.25mm
.02" 0.5mm .18" 45º 4.5mm
S S C -X 3 9 A Drag Soldering Tip (Hoof)
2.3mm
700 SERIES X=7
S S C -X 6 7 A
Drag Soldering Tip (Knife)
0.5mm
.24" 6.1mm
500 SERIES X=5
S S C -X 4 5 A
Drag Soldering Tip (Mini-Hoof)
.02"
.016"
Bevel 60º .07” (1.78mm)
Bevel 60º .016” (0.4mm)
1.27mm
*220/240 VAC system does not include power cords **Tips not included
.75" 19mm
0.4mm
Sharp Bent 30º .02” (0.51mm)
S S C -X 4 7 A
60° .07" 1.78mm
Chisel 30º .07” (1.78mm)
Sharp Bent 30º .02” (0.51mm)
S S C -X 2 6 A
.02" 0.51mm
S S C -X 3 7 A
S S C -X 7 4 A
.055"
.04"
S S C -X 5 4 A
.016"
1.78mm
*220/240 VAC system does not include power cords
SP-PW1-10 SP-PW1-20 AC-CP2 AC-YS3-P AC-BRUSH-P AC-TCASE AC-TSTAND SP-HC1 SP-OR SP-WSK1 SP-CRADLE
.02" .51mm
S S C -X 3 6 A
S S C -X 7 1 A Conical Chisel .04” (1.0mm)
1.0mm
S S C -X 7 0 A
1.78mm
.36" 9.1mm
.04"
Long Reach Chisel .12” (3.0mm)
S S C -X 7 2 A Conical Chisel .07” (1.78mm)
1.78mm
Long Reach Chisel 60º .07” (1.78mm)
1.78mm
.39" 9.9mm
.07"
Chisel 30º .10” (2.5mm)
.07"
SP200 SOLDERING SYSTEM
S S C -X 1 3 A
S S C -X 2 2 A Conical Sharp .02” (0.51mm)
0.51mm
S S C -X 4 6 A
.12"
ens uri ng tha t the S P 200 S o l deri ng S y st em i s p ra c t i c a l l y m a i n t en a n c e-free.
Extra L arge Chisel .21” (5.3mm)
Chisel 90º .13” (3.3mm)
.13" 3.3mm
pi ec e a nd s wi tc h o n. A s the uni t wo rk s a t a l o wer t em p era t u re t h a n a c o n ven t i o n a l i r o n a n d r e q u i r e s
.45" 11.4mm
.02"
S S C -X 7 3 A Drag Soldering Tip (Increased T i n n e d Area, . 2 4 ” 6 . 1 m m )
page 19
SP200 Soldering System
22/11/01
2:45 pm
Page 32
S P 20 0
SP200
S P200 S ol d e r in g S y s te m
T i p C a r t r i d g e s Fo r S o l d e r i n g A p p l i c a t i o n s The S P 200 S o l d e r i n g S y s t e m ’s tip c ar t rid ge s are de si gne d to su i t a wi de ran g e o f so ld erin g a pplicat ion s. SP200
Fo r o p ti m um p er f o r m anc e, o p er ato rs sh ou l d s ele c t t he t ip t hat al lo ws ma ximu m con ta ct wit h t he w ork sur f ac e. We suggest that yo u star t w ith a 600 se rie s ti p car tr idge.
SP200 SOLDER TIP CARTRIDGES
Economical Soldering System Cuts Costs, Not Corners S S C -X 1 7 A
T he S P 200 S o l deri ng S y s tem i s the m o st c o st -effec t i ve a n d ea si est t o u se c o m p a c t s o l d e r i n g s y s t e m .21" 5.3mm
a va i l a bl e to da y.
.40" 10mm
.30" 7.6mm
Fo r fl a wl es s s o l deri ng, tec hni c i a ns need o n l y sel ec t t h e c o rrec t t i p c a r t ri d g e, i n s e r t i t i n t o t h e h a n d -
no c a l i bra ti o n, o p era to rs a l wa y s a p p l y t h e c o rrec t l evel o f t h erm a l en erg y n e e d e d t o p r o d u c e s o l d e r j o i nts o f the hi ghes t qua l i ty wi tho ut ri sk i n g c o m p o n en t o r P C B d a m a g e. 3.0mm
.65" 16.5mm
I n a ddi ti o n, the s y s tem ’s des i gn i s ex t rem el y rel i a b l e, wi t h ver y few p a r t s t h a t e v e r n e e d r e p a i r i n g ,
M etc a l ’s S P 200 S o l deri ng S y s tem , fo r t h ro u g h -h o l e so l d eri n g a n d S M T t o u c h -u p , i s d e s i g n e d t o perfec tl y c o m pl em ent o ur M X- 500 S o l d eri n g , Deso l d eri n g & Rewo rk S y st em .
.39" 9.9mm .10" 2.5mm
.63" 16mm
.07"
.65" 16.5mm
System Includes Power Supply With Power Cord*, Hand-Piece With Cord, Workstand With Sponge And Cartidge Removal Pad
.40" 9.9mm .07"
Part No.
Description
SP200-11 SP200-21
115 VAC Soldering System 220/240 VAC Soldering System*
.06"
A C C E S S O R I E S & S PA R E PA R T S
page 18
Power Supply with Power Cord Power Supply with Power Cord* Cartridge Removal Pad Workstand Sponge (Pack of 50) Soft Brass Brush Cleaner (Pack of 6) Tip Case (holds 10 tips)** Tip Stand ESD Solder Handle W/CP2 for SP200 Systems O-Ring Replacement Kit SP Workstand with YS3 Sponge Universal Cradle
.40" 10mm
1.5mm
.43" 11mm
.04" 1.0mm
.73" 18.5mm
S S C -X 4 2 A
Long Chisel .07” (1.78mm)
.45" 11.4mm
.56" 14.2mm
S S C -X 3 8 A
.05"
Chisel 30º .06” (1.5mm)
S S C -X 2 5 A Chisel 30º .04” (1.0mm)
1.4mm .590" 15mm
.60" 15.2mm
1.0mm
Conical Sharp .055” (1.4mm)
S S C -X 0 1 A Conical Sharp .04” (1.0mm)
.70" 17.8mm
.64" 16.25mm
600 SERIES X=6
.18"45º 4.5mm
.70" 17.8mm
S S C -X 6 1 A
.64" 16.25mm
.02" 0.5mm .18" 45º 4.5mm
S S C -X 3 9 A Drag Soldering Tip (Hoof)
2.3mm
700 SERIES X=7
S S C -X 6 7 A
Drag Soldering Tip (Knife)
0.5mm
.24" 6.1mm
500 SERIES X=5
S S C -X 4 5 A
Drag Soldering Tip (Mini-Hoof)
.02"
.016"
Bevel 60º .07” (1.78mm)
Bevel 60º .016” (0.4mm)
1.27mm
*220/240 VAC system does not include power cords **Tips not included
.75" 19mm
0.4mm
Sharp Bent 30º .02” (0.51mm)
S S C -X 4 7 A
60° .07" 1.78mm
Chisel 30º .07” (1.78mm)
Sharp Bent 30º .02” (0.51mm)
S S C -X 2 6 A
.02" 0.51mm
S S C -X 3 7 A
S S C -X 7 4 A
.055"
.04"
S S C -X 5 4 A
.016"
1.78mm
*220/240 VAC system does not include power cords
SP-PW1-10 SP-PW1-20 AC-CP2 AC-YS3-P AC-BRUSH-P AC-TCASE AC-TSTAND SP-HC1 SP-OR SP-WSK1 SP-CRADLE
.02" .51mm
S S C -X 3 6 A
S S C -X 7 1 A Conical Chisel .04” (1.0mm)
1.0mm
S S C -X 7 0 A
1.78mm
.36" 9.1mm
.04"
Long Reach Chisel .12” (3.0mm)
S S C -X 7 2 A Conical Chisel .07” (1.78mm)
1.78mm
Long Reach Chisel 60º .07” (1.78mm)
1.78mm
.39" 9.9mm
.07"
Chisel 30º .10” (2.5mm)
.07"
SP200 SOLDERING SYSTEM
S S C -X 1 3 A
S S C -X 2 2 A Conical Sharp .02” (0.51mm)
0.51mm
S S C -X 4 6 A
.12"
ens uri ng tha t the S P 200 S o l deri ng S y st em i s p ra c t i c a l l y m a i n t en a n c e-free.
Extra L arge Chisel .21” (5.3mm)
Chisel 90º .13” (3.3mm)
.13" 3.3mm
pi ec e a nd s wi tc h o n. A s the uni t wo rk s a t a l o wer t em p era t u re t h a n a c o n ven t i o n a l i r o n a n d r e q u i r e s
.45" 11.4mm
.02"
S S C -X 7 3 A Drag Soldering Tip (Increased T i n n e d Area, . 2 4 ” 6 . 1 m m )
page 19
SP440 Desoldering System
SP440
22/11/01
2:34 pm
Page 28
S P 44 0
S e l f - Con t a i n e d D e s old e r in g S y s tem
A d v a n c e d O p e r a t i n g A n d S a f e t y Fe a t u r e s T h e S P 4 4 0 S e l f- C o n t a i n e d De s o l de r i n g S ys t e m ha s a nu m b e r of f e at ur es , which co mbine to ens ure SP440
t h a t i t i s t h e m o s t r e l i a b l e a n d c os t -e f f e c ti v e s ol u t i on av ai l a b l e fo r s e lf -co n ta ined d eso ld ering . Th e s y s t e m ’ s t i m e - o u t fe a t u r e s w i t c he s of f th e p ow e r s u p p l y a f t e r a 3 0- m i n u te redun d ancy perio d, th us s i g n i fi c a n t l y e x t e n d i n g t i p l i fe an d c o ns e r v i n g e n e r g y.
Po w e r f u l , Po r t a b l e T h r o u g h - H o l e R e w o r k
C o u p l e d w i t h t h e s e fe a t u r e s a r e e l e me n t s t h a t r e fl e c t o ur de d i c at i on to opera to r an d pro ces s s af ety.
M etc a l ’s S P 440 S el f- C o nta i ned D es o l d eri n g S y st em i s sp ec i fi c a l l y d esi g n ed fo r t h r o u g h -h o l e r e wo r k ,
T h e S P 4 4 0 S e l f- C o n t a i n e d De s o l d e r i n g S ys t e m ’ s E S D c ab l e an d v a c u u m line a re burn - pro of, which
del i veri ng po werful a nd p o r ta b l e deso l d eri n g .
s a fe g u a r d s o p e r a t o r s fr o m i n j u r y a nd p r e v e n t s d am a ge to e xp e n s i v e pro ces s elem ent s. Th e unit’ s r e a d i l y a c c e s s i b l e p a p e r s o l d e r c ol l e c t i on c h a mb e r r e n d e r s th e f or m e r g las s car tridg es o bs o lete a nd
T he s y s tem ’s bui l t- i n va c uum p um p c l ea rs t h ro u g h -h o l es q u i c k l y a n d c o m p l e t e l y, m a k i n g i t i d e a l l y
speeds the desoldering process.
s u i t e d t o a r e a s w i t h o u t s h o p a i r. T h i s l i g h t w e i g h t , e r g o n o m i c p e n c i l g r i p d e s o l d e r i n g t o o l m a x i m i z es o pera to r p ro duc ti vi ty a nd red u c es t h e ri sk o f d a m a g e t o c o m p o n e n t s a n d s u b s t r a t e s .
Desoldering Tips T h e S P 4 4 0 S e l f- C o n t a i n e d De s ol d e r i n g S y s t e m’ s t i p s ar e a v a i l ab l e i n tw o t empera ture ra n ges : 60 0 a n d 7 0 0 s e r i e s . To e n s u r e t h e b e s t r e s ul ts , c h oo s e a t i p w i t h an i n t e r i or d iam eter only s light ly la rger t h a n t h a t o f t h e l e a d o n t h e c o mp o n e n t t o b e d e s ol d e r e d.
SP440 DESOLDERING SYSTEM System Includes Power Supply With Power Cord*, Hand-Piece Assembly, Workstand Kit With Sponge, Tip Cleaners And Cartidge Removal Pad
SP440-11 SP440-21
115 VAC Self-Contained Desoldering System 220/240 VAC Self-Contained Desoldering System*
*220/240 VAC system does not include power cords
A C C E S S O R I E S & S PA R E PA R T S B SP-PW3-11 SP-PW3-21 DP-DSG2
A
TIP RANGE DIAMETER IN INCHES (mm)
Part No.
page 20
Us i ng S m a r tHea t ® tec hno l o gy, the S P 4 4 0 S el f- C o n t a i n ed Deso l d eri n g S y st em s u p p l i e s h i g h e r Wa t t dens i ty po wer a t l o wer tem p era tures t h a n o t h er d eso l d eri n g t o o l s wi t h n o o v e r s h o o t . I t s 5 0 -Wa t t po wer ra ti ng a nd ti p s , s p ec i fi c a l l y d esi g n ed t o m a x i m i z e h ea t t ra n sfer, m a ke t h e s y s t e m i d e a l fo r hea vy l o a d des o l deri ng o f c o m p o nen t s o n g ro u n d -p l a n es a n d m u l t i -l a y er P C B s .
SDC-X02 SDC-X03 SDC-X04 SDC-X05 SDC-X06 SDC-X07
A
.025 .030 .040 .050 .060 .095
600 SERIES X=6
B
(0.64) (0.76) (1.02) (1.27) (1.52) (2.41)
.055 .060 .070 .080 .090 .125
(1.40) (1.52) (1.78) (2.03) (2.29) (3.18)
700 SERIES X=7
DP-WSK2 DP-SL3 AC-TC-P AC-CP2 DP-CA2 DP-CC DP-CF DP-LF DP-VB1 DP-VL1 DP-WSC2 AC-YS3-P
Power Supply with Power Cord Power Supply with Power Cord* Hand-Piece Assembly (handle, cord, vac line, coil assembly) SP440 Workstand Kit with YS3 Sponge Front Seal for DSG2 Tip Cleaners (Pack of 12) Cartridge Removal Pad Coil Assembly Solder Collection Chamber for DSG2 Filter Pack (12 fume filters, 24 chamber liners) Filter Pack (5 inline filters) Valve Body Assembly (clip, valve, ESD vac. hose) Vacuum Line, ESD SP440 Cradle Workstand Sponge (Pack of 50)
*220/240 VAC system does not include power cords
page 21
SP440 Desoldering System
SP440
22/11/01
2:34 pm
Page 28
S P 44 0
S e l f - Con t a i n e d D e s old e r in g S y s tem
A d v a n c e d O p e r a t i n g A n d S a f e t y Fe a t u r e s T h e S P 4 4 0 S e l f- C o n t a i n e d De s o l de r i n g S ys t e m ha s a nu m b e r of f e at ur es , which co mbine to ens ure SP440
t h a t i t i s t h e m o s t r e l i a b l e a n d c os t -e f f e c ti v e s ol u t i on av ai l a b l e fo r s e lf -co n ta ined d eso ld ering . Th e s y s t e m ’ s t i m e - o u t fe a t u r e s w i t c he s of f th e p ow e r s u p p l y a f t e r a 3 0- m i n u te redun d ancy perio d, th us s i g n i fi c a n t l y e x t e n d i n g t i p l i fe an d c o ns e r v i n g e n e r g y.
Po w e r f u l , Po r t a b l e T h r o u g h - H o l e R e w o r k
C o u p l e d w i t h t h e s e fe a t u r e s a r e e l e me n t s t h a t r e fl e c t o ur de d i c at i on to opera to r an d pro ces s s af ety.
M etc a l ’s S P 440 S el f- C o nta i ned D es o l d eri n g S y st em i s sp ec i fi c a l l y d esi g n ed fo r t h r o u g h -h o l e r e wo r k ,
T h e S P 4 4 0 S e l f- C o n t a i n e d De s o l d e r i n g S ys t e m ’ s E S D c ab l e an d v a c u u m line a re burn - pro of, which
del i veri ng po werful a nd p o r ta b l e deso l d eri n g .
s a fe g u a r d s o p e r a t o r s fr o m i n j u r y a nd p r e v e n t s d am a ge to e xp e n s i v e pro ces s elem ent s. Th e unit’ s r e a d i l y a c c e s s i b l e p a p e r s o l d e r c ol l e c t i on c h a mb e r r e n d e r s th e f or m e r g las s car tridg es o bs o lete a nd
T he s y s tem ’s bui l t- i n va c uum p um p c l ea rs t h ro u g h -h o l es q u i c k l y a n d c o m p l e t e l y, m a k i n g i t i d e a l l y
speeds the desoldering process.
s u i t e d t o a r e a s w i t h o u t s h o p a i r. T h i s l i g h t w e i g h t , e r g o n o m i c p e n c i l g r i p d e s o l d e r i n g t o o l m a x i m i z es o pera to r p ro duc ti vi ty a nd red u c es t h e ri sk o f d a m a g e t o c o m p o n e n t s a n d s u b s t r a t e s .
Desoldering Tips T h e S P 4 4 0 S e l f- C o n t a i n e d De s ol d e r i n g S y s t e m’ s t i p s ar e a v a i l ab l e i n tw o t empera ture ra n ges : 60 0 a n d 7 0 0 s e r i e s . To e n s u r e t h e b e s t r e s ul ts , c h oo s e a t i p w i t h an i n t e r i or d iam eter only s light ly la rger t h a n t h a t o f t h e l e a d o n t h e c o mp o n e n t t o b e d e s ol d e r e d.
SP440 DESOLDERING SYSTEM System Includes Power Supply With Power Cord*, Hand-Piece Assembly, Workstand Kit With Sponge, Tip Cleaners And Cartidge Removal Pad
SP440-11 SP440-21
115 VAC Self-Contained Desoldering System 220/240 VAC Self-Contained Desoldering System*
*220/240 VAC system does not include power cords
A C C E S S O R I E S & S PA R E PA R T S B SP-PW3-11 SP-PW3-21 DP-DSG2
A
TIP RANGE DIAMETER IN INCHES (mm)
Part No.
page 20
Us i ng S m a r tHea t ® tec hno l o gy, the S P 4 4 0 S el f- C o n t a i n ed Deso l d eri n g S y st em s u p p l i e s h i g h e r Wa t t dens i ty po wer a t l o wer tem p era tures t h a n o t h er d eso l d eri n g t o o l s wi t h n o o v e r s h o o t . I t s 5 0 -Wa t t po wer ra ti ng a nd ti p s , s p ec i fi c a l l y d esi g n ed t o m a x i m i z e h ea t t ra n sfer, m a ke t h e s y s t e m i d e a l fo r hea vy l o a d des o l deri ng o f c o m p o nen t s o n g ro u n d -p l a n es a n d m u l t i -l a y er P C B s .
SDC-X02 SDC-X03 SDC-X04 SDC-X05 SDC-X06 SDC-X07
A
.025 .030 .040 .050 .060 .095
600 SERIES X=6
B
(0.64) (0.76) (1.02) (1.27) (1.52) (2.41)
.055 .060 .070 .080 .090 .125
(1.40) (1.52) (1.78) (2.03) (2.29) (3.18)
700 SERIES X=7
DP-WSK2 DP-SL3 AC-TC-P AC-CP2 DP-CA2 DP-CC DP-CF DP-LF DP-VB1 DP-VL1 DP-WSC2 AC-YS3-P
Power Supply with Power Cord Power Supply with Power Cord* Hand-Piece Assembly (handle, cord, vac line, coil assembly) SP440 Workstand Kit with YS3 Sponge Front Seal for DSG2 Tip Cleaners (Pack of 12) Cartridge Removal Pad Coil Assembly Solder Collection Chamber for DSG2 Filter Pack (12 fume filters, 24 chamber liners) Filter Pack (5 inline filters) Valve Body Assembly (clip, valve, ESD vac. hose) Vacuum Line, ESD SP440 Cradle Workstand Sponge (Pack of 50)
*220/240 VAC system does not include power cords
page 21
QX2 Rework_1160 Air Pencil
QX2
23/11/01
9:42 am
Page 36
Q X2
QX2
QX 2 Co nv ec t io n R ew o rk S y st e m
Convection Rework Made Easy T he QX 2 C o nvec ti o n R ewo rk S y s tem c o m b i n es so p h i st i c a t ed p ro c ess c o n t r o l a n d wi d e -r a n g i n g c a pa bi l i ti es wi th a us er- fri endl y, erg o n o m i c d esi g n t o sp eed a n d si m p l i f y t h e r e w o r k p r o c e s s . W i t h i ts c o ns ta nt tem p era ture a nd va ri a b l e p o wer, t h e QX2 C o n vec t i o n Rewo rk S y s t e m m i n i m i z e s t h e r i s k o f therm a l da m a ge, p ro vi di ng a s a fe en vi ro n m en t fo r d el i c a t e c o m p o n en t s a n d s u b s t r a t e s .
I n c o m pa ri s o n wi th o ther c o nvec ti o n sy st em s, t h e si m p l i c i t y a n d p o wer o f t h i s m a c h i n e i s c l e a r. S i m pl i fi ed pus h- b utto n c o ntro l s a nd a d va n c ed a u t o m a t i o n red u c e t h e n eed fo r e x t e n d e d o p e r a t o r tra i ni ng whi l e grea tl y reduc i ng the l i kel i h o o d o f h u m a n erro r. Ol d er c o n vec t i o n s y s t e m s a r e d i ffi c u l t to o pera te a nd requi re ex tens i ve us er t ra i n i n g . Th i s i s n o t t h e c a se wi t h t h e QX 2 C o n v e c t i o n Re wo r k S y s tem . Even i ts i ni ti a l s et- up i s a fa st a n d ea sy p ro c ess, req u i ri n g n o sp ec i a l t o o l s .
P l ea s e no te: T he QX 2 C o nvec ti o n R ewo rk S y st em i s sh o wn b el o w a l o n g si d e a M e t c a l BVX-1 0 0 Fum e Ex tra c ti o n S y s tem whi c h i s a va i l a b l e sep a ra t el y.
Streamlined Operation T h e QX 2 C o n v e c t i o n Re w o r k S ys t e m ’ s v ac u u m p i c k-u p ge n t l y r e mo ves co mpo n ents a f ter reflow. T h e t i m e o f e a c h r e m o v a l c y c l e i s s t or e d an d d i s p l ay e d a s a g u i d e t o h e lp o pera to rs q uick ly es ta blis h a m i n i m u m t i m e fo r c o m p o n e n t p l a c e me n t . T h e s ys te m th e n a u t om a tica lly tu rns o ff the h eat t o m i n i m i z e t h e r i s k o f t h e r m a l s h o c k t o a dj a c e n t c om p on e n t s o r to t he P CB its elf. An in tegr at ed u n d e r-b o a r d p r e -h e a t e r i s a l s o a v a i l ab l e t o p r e v e n t t h e wa r p i n g o f l a r ge bo a rds d uring rewo rk .
page 22
page
Pr e c i s e N o z z l e s I n c r e a s e F l e x i b i l i t y
Op e r a t o r s c a n fi n e -t u n e t h e p ow e r b y a d j u s ti n g th e ai r f l ow r at e , b u t to min imize therm a l s tres s, the
A wi de ra nge o f fo c us ed c o nvec ti o n n o z z l es i s a va i l a b l e fo r t h e QX2 C o n v e c t i o n Re wo r k S y s t e m .
s y s t e m a u t o m a t i c a l l y s u s t a i n s t he h e at e r e xh a us t t e m p e r a tu r e wh i l e ma in ta ining a co n sis ten tly lo w
T hes e di rec t hea t p rec i s el y where i t i s n eed ed . Wi t h M et c a l ’ s q u i c k -rel ea se s y s t e m , t h e s e n o z z l e s
s e t p o i n t t e m p e r a t u r e . To a c c o mm od a te a ny p r oc e s s c h an g e , i n c l u d i ng the us e o f new s o lderin g
c a n be c ha nged i n s ec o nds , fo r uns u rp a ssed sp eed a n d fl ex i b i l i t y.
a l l o y s , t h e m a n u fa c t u r i n g e n g i n e e r c an e as i l y r e p r og r a m t h i s s e t te m pera tu re.
23
QX2 Rework_1160 Air Pencil
QX2
23/11/01
9:42 am
Page 36
Q X2
QX2
QX 2 Co nv ec t io n R ew o rk S y st e m
Convection Rework Made Easy T he QX 2 C o nvec ti o n R ewo rk S y s tem c o m b i n es so p h i st i c a t ed p ro c ess c o n t r o l a n d wi d e -r a n g i n g c a pa bi l i ti es wi th a us er- fri endl y, erg o n o m i c d esi g n t o sp eed a n d si m p l i f y t h e r e w o r k p r o c e s s . W i t h i ts c o ns ta nt tem p era ture a nd va ri a b l e p o wer, t h e QX2 C o n vec t i o n Rewo rk S y s t e m m i n i m i z e s t h e r i s k o f therm a l da m a ge, p ro vi di ng a s a fe en vi ro n m en t fo r d el i c a t e c o m p o n en t s a n d s u b s t r a t e s .
I n c o m pa ri s o n wi th o ther c o nvec ti o n sy st em s, t h e si m p l i c i t y a n d p o wer o f t h i s m a c h i n e i s c l e a r. S i m pl i fi ed pus h- b utto n c o ntro l s a nd a d va n c ed a u t o m a t i o n red u c e t h e n eed fo r e x t e n d e d o p e r a t o r tra i ni ng whi l e grea tl y reduc i ng the l i kel i h o o d o f h u m a n erro r. Ol d er c o n vec t i o n s y s t e m s a r e d i ffi c u l t to o pera te a nd requi re ex tens i ve us er t ra i n i n g . Th i s i s n o t t h e c a se wi t h t h e QX 2 C o n v e c t i o n Re wo r k S y s tem . Even i ts i ni ti a l s et- up i s a fa st a n d ea sy p ro c ess, req u i ri n g n o sp ec i a l t o o l s .
P l ea s e no te: T he QX 2 C o nvec ti o n R ewo rk S y st em i s sh o wn b el o w a l o n g si d e a M e t c a l BVX-1 0 0 Fum e Ex tra c ti o n S y s tem whi c h i s a va i l a b l e sep a ra t el y.
Streamlined Operation T h e QX 2 C o n v e c t i o n Re w o r k S ys t e m ’ s v ac u u m p i c k-u p ge n t l y r e mo ves co mpo n ents a f ter reflow. T h e t i m e o f e a c h r e m o v a l c y c l e i s s t or e d an d d i s p l ay e d a s a g u i d e t o h e lp o pera to rs q uick ly es ta blis h a m i n i m u m t i m e fo r c o m p o n e n t p l a c e me n t . T h e s ys te m th e n a u t om a tica lly tu rns o ff the h eat t o m i n i m i z e t h e r i s k o f t h e r m a l s h o c k t o a dj a c e n t c om p on e n t s o r to t he P CB its elf. An in tegr at ed u n d e r-b o a r d p r e -h e a t e r i s a l s o a v a i l ab l e t o p r e v e n t t h e wa r p i n g o f l a r ge bo a rds d uring rewo rk .
page 22
page
Pr e c i s e N o z z l e s I n c r e a s e F l e x i b i l i t y
Op e r a t o r s c a n fi n e -t u n e t h e p ow e r b y a d j u s ti n g th e ai r f l ow r at e , b u t to min imize therm a l s tres s, the
A wi de ra nge o f fo c us ed c o nvec ti o n n o z z l es i s a va i l a b l e fo r t h e QX2 C o n v e c t i o n Re wo r k S y s t e m .
s y s t e m a u t o m a t i c a l l y s u s t a i n s t he h e at e r e xh a us t t e m p e r a tu r e wh i l e ma in ta ining a co n sis ten tly lo w
T hes e di rec t hea t p rec i s el y where i t i s n eed ed . Wi t h M et c a l ’ s q u i c k -rel ea se s y s t e m , t h e s e n o z z l e s
s e t p o i n t t e m p e r a t u r e . To a c c o mm od a te a ny p r oc e s s c h an g e , i n c l u d i ng the us e o f new s o lderin g
c a n be c ha nged i n s ec o nds , fo r uns u rp a ssed sp eed a n d fl ex i b i l i t y.
a l l o y s , t h e m a n u fa c t u r i n g e n g i n e e r c an e as i l y r e p r og r a m t h i s s e t te m pera tu re.
23
QX2 Rework_1160 Air Pencil
QX2
23/11/01
9:43 am
Page 38
A d v a n c e d Pr o c e s s C o n t r o l
QX2 Convection Rework Nozzles
The system’s digital controller clearly displays critical parameters during operation while its
Metc al has a c o m p r ehensi ve r ange o f n oz z les fo r th e Q X2 C on v e c ti o n Re w ork Sy st em . Fo r n on -s tan dard
a uto m a ted func ti o ns reduc e p ro c ess va ri a b i l i t y. It s ex p a n d ed l evel o f p r o c e s s c o n t r o l p r o v i d e s
c o m p o nents we o f f er a c usto m n oz zle pr og ram. P le ase co ntac t you r l oc al Met cal repres ent ative fo r more
s uperi o r qua l i ty o f o p era ti o n a nd fi n a l p ro d u c t , wi t h l ess sc ra p a n d g rea t er t h r o u g h p u t .
i nf o r m ati o n ab o ut c usto m no z z l e s.
QX2
S TA N D A R D N O Z Z L E R A N G E DIMENSIONS IN INCHES (mm) A
B
A
B
Part No.
Component Types
A
NZ-D1113 NZ-D1116 NZ-D1420 NZ-D2109 NZ-D2113
Nozzle Nozzle Nozzle Nozzle Nozzle
Dual Dual (for SOL 28) Dual Dual Dual
0.43 0.43 0.55 0.35 0.51
(11) (11) (14) (09) (13)
0.51 0.63 0.79 0.83 0.83
(13) (16) (20) (21) (21)
NZ-Q11 NZ-Q13 NZ-Q1415 NZ-Q17 NZ-Q18 NZ-Q19 NZ-Q1925 NZ-Q22 NZ-Q23 NZ-Q27 NZ-Q28 NZ-Q32 NZ-Q33 NZ-Q35 NZ-Q38 NZ-Q43
Nozzle Nozzle Nozzle Nozzle Nozzle Nozzle Nozzle Nozzle Nozzle Nozzle Nozzle Nozzle Nozzle Nozzle Nozzle Nozzle
Quad Quad Quad Quad Quad Quad Quad Quad Quad Quad Quad Quad Quad Quad Quad Quad
0.43 0.51 0.55 0.67 0.71 0.75 0.75 0.87 0.91 1.06 1.10 1.26 1.30 1.38 1.50 1.70
(11) (13) (14) (17) (18) (19) (19) (22) (23) (27) (28) (32) (33) (35) (38) (43)
0.43 0.51 0.60 0.67 0.71 0.75 0.98 0.87 0.91 1.06 1.10 1.26 1.30 1.38 1.50 1.70
(11) (13) (15) (17) (18) (19) (25) (22) (23) (27) (28) (32) (33) (35) (38) (43)
(for PLCC 20) (for PLCC 28)
(for QFP 80) (for PLCC 44) (for QFP 100)
(for PLCC 68) (for PLCC 84, QFP 208) (for QFP 120/128/144/160)
B
Remote Controller Functions T ime r : B y c o unting up d ur ing r e m o va l a nd do w n dur ing a t t a chm e nt , t he t im er r em oves sub je c tive g ue ssw o rk fro m t he r e w o r k p r o ce s s .
Temp e r a t u r e D i s p l a y : D i s p l a y s t h e t e m p e r a t u r e o f t h e h e a t e r e x h a u s t o r t h e
Box Reflow Nozzles I n a d d i t i o n t o o u r b r o a d r a n g e o f s ta nd ar d n o z z l e s , we al s o of fe r a ra n ge o f bo x reflo w no zzles d e s i g n e d fo r t h e r e m o v a l o f s h i e l d i n g c a ns , c o n n e c to r s an d ot h e r s qu are co m po n ents .
te m p e rature m e asure d b y a n a ux ilia r y t he r m o co up le in e it he r ° F o r ° C . The hea t er exha us t te m p e rature is p re se t at 662ºF ( 350° C ) a nd m a y b e r e s e t b y t he p r o ces s engineer t o anyw he re b e tw e e n 482ºF ( 250° C ) a nd 842ºF ( 450° C ) b y e nt e r ing a n unlo ck code.
A t t ach M o d e : T his m o d e r e flo w s a ne w co m p o ne nt t o t he PC B. By a djus t ing t he t im e sto re d in Re m o ve m o d e w it h t he + - ke ys , yo u ca n e ns ur e a n a p p r o p r ia t e r eflow t im e, w hic h m ay b e ad juste d o n t he fly if de s ir e d.
A i r f l o w S e l ect o r : T he a ir flo w s e le ct o r de t e r m ine s t he r a t e a t w hich t her m a l ener gy is transfe rre d to the c o m p o ne nt .
B OX R E F L O W N O Z Z L E S
R emo v e Mode : T his m o d e a ct iva t e s t he va cuum p ick -up , w hich a p p lie s a gent le up wa r d forc e to the c o m p o ne nt. W he n co m p o ne nt lif t o ff is s e ns e d, t he he a t e r is a ut om a t ica lly turne d o ff.
page 24
INTERNAL DIMENSIONS IN INCHES (mm)
A Part No.
Component Types
NZ-B23 NZ-B27 NZ-B33 NZ-B35 NZ-B40 NZ-B44
Nozzle Nozzle Nozzle Nozzle Nozzle Nozzle
A
B
page
S t a r t / S t o p B u t t o n : Pre s s ing t he St a r t /St o p b ut t o n init ia t e s o r e nds t he Rem ove or A ttac h c yc le . I n Re m o ve m o de , s t o p p ing t he cycle a ls o s hut s o ff t he va cuum , t o r elea s e c om p o ne nts af te r lif t o ff.
B
Box Box Box Box Box Box
0.91 1.06 1.30 1.38 1.57 1.73
(23) (27) (33) (35) (40) (44)
0.91 1.06 1.30 1.38 1.57 1.73
(23) (27) (33) (35) (40) (44)
25
QX2 Rework_1160 Air Pencil
QX2
23/11/01
9:43 am
Page 38
A d v a n c e d Pr o c e s s C o n t r o l
QX2 Convection Rework Nozzles
The system’s digital controller clearly displays critical parameters during operation while its
Metc al has a c o m p r ehensi ve r ange o f n oz z les fo r th e Q X2 C on v e c ti o n Re w ork Sy st em . Fo r n on -s tan dard
a uto m a ted func ti o ns reduc e p ro c ess va ri a b i l i t y. It s ex p a n d ed l evel o f p r o c e s s c o n t r o l p r o v i d e s
c o m p o nents we o f f er a c usto m n oz zle pr og ram. P le ase co ntac t you r l oc al Met cal repres ent ative fo r more
s uperi o r qua l i ty o f o p era ti o n a nd fi n a l p ro d u c t , wi t h l ess sc ra p a n d g rea t er t h r o u g h p u t .
i nf o r m ati o n ab o ut c usto m no z z l e s.
QX2
S TA N D A R D N O Z Z L E R A N G E DIMENSIONS IN INCHES (mm) A
B
A
B
Part No.
Component Types
A
NZ-D1113 NZ-D1116 NZ-D1420 NZ-D2109 NZ-D2113
Nozzle Nozzle Nozzle Nozzle Nozzle
Dual Dual (for SOL 28) Dual Dual Dual
0.43 0.43 0.55 0.35 0.51
(11) (11) (14) (09) (13)
0.51 0.63 0.79 0.83 0.83
(13) (16) (20) (21) (21)
NZ-Q11 NZ-Q13 NZ-Q1415 NZ-Q17 NZ-Q18 NZ-Q19 NZ-Q1925 NZ-Q22 NZ-Q23 NZ-Q27 NZ-Q28 NZ-Q32 NZ-Q33 NZ-Q35 NZ-Q38 NZ-Q43
Nozzle Nozzle Nozzle Nozzle Nozzle Nozzle Nozzle Nozzle Nozzle Nozzle Nozzle Nozzle Nozzle Nozzle Nozzle Nozzle
Quad Quad Quad Quad Quad Quad Quad Quad Quad Quad Quad Quad Quad Quad Quad Quad
0.43 0.51 0.55 0.67 0.71 0.75 0.75 0.87 0.91 1.06 1.10 1.26 1.30 1.38 1.50 1.70
(11) (13) (14) (17) (18) (19) (19) (22) (23) (27) (28) (32) (33) (35) (38) (43)
0.43 0.51 0.60 0.67 0.71 0.75 0.98 0.87 0.91 1.06 1.10 1.26 1.30 1.38 1.50 1.70
(11) (13) (15) (17) (18) (19) (25) (22) (23) (27) (28) (32) (33) (35) (38) (43)
(for PLCC 20) (for PLCC 28)
(for QFP 80) (for PLCC 44) (for QFP 100)
(for PLCC 68) (for PLCC 84, QFP 208) (for QFP 120/128/144/160)
B
Remote Controller Functions T ime r : B y c o unting up d ur ing r e m o va l a nd do w n dur ing a t t a chm e nt , t he t im er r em oves sub je c tive g ue ssw o rk fro m t he r e w o r k p r o ce s s .
Temp e r a t u r e D i s p l a y : D i s p l a y s t h e t e m p e r a t u r e o f t h e h e a t e r e x h a u s t o r t h e
Box Reflow Nozzles I n a d d i t i o n t o o u r b r o a d r a n g e o f s ta nd ar d n o z z l e s , we al s o of fe r a ra n ge o f bo x reflo w no zzles d e s i g n e d fo r t h e r e m o v a l o f s h i e l d i n g c a ns , c o n n e c to r s an d ot h e r s qu are co m po n ents .
te m p e rature m e asure d b y a n a ux ilia r y t he r m o co up le in e it he r ° F o r ° C . The hea t er exha us t te m p e rature is p re se t at 662ºF ( 350° C ) a nd m a y b e r e s e t b y t he p r o ces s engineer t o anyw he re b e tw e e n 482ºF ( 250° C ) a nd 842ºF ( 450° C ) b y e nt e r ing a n unlo ck code.
A t t ach M o d e : T his m o d e r e flo w s a ne w co m p o ne nt t o t he PC B. By a djus t ing t he t im e sto re d in Re m o ve m o d e w it h t he + - ke ys , yo u ca n e ns ur e a n a p p r o p r ia t e r eflow t im e, w hic h m ay b e ad juste d o n t he fly if de s ir e d.
A i r f l o w S e l ect o r : T he a ir flo w s e le ct o r de t e r m ine s t he r a t e a t w hich t her m a l ener gy is transfe rre d to the c o m p o ne nt .
B OX R E F L O W N O Z Z L E S
R emo v e Mode : T his m o d e a ct iva t e s t he va cuum p ick -up , w hich a p p lie s a gent le up wa r d forc e to the c o m p o ne nt. W he n co m p o ne nt lif t o ff is s e ns e d, t he he a t e r is a ut om a t ica lly turne d o ff.
page 24
INTERNAL DIMENSIONS IN INCHES (mm)
A Part No.
Component Types
NZ-B23 NZ-B27 NZ-B33 NZ-B35 NZ-B40 NZ-B44
Nozzle Nozzle Nozzle Nozzle Nozzle Nozzle
A
B
page
S t a r t / S t o p B u t t o n : Pre s s ing t he St a r t /St o p b ut t o n init ia t e s o r e nds t he Rem ove or A ttac h c yc le . I n Re m o ve m o de , s t o p p ing t he cycle a ls o s hut s o ff t he va cuum , t o r elea s e c om p o ne nts af te r lif t o ff.
B
Box Box Box Box Box Box
0.91 1.06 1.30 1.38 1.57 1.73
(23) (27) (33) (35) (40) (44)
0.91 1.06 1.30 1.38 1.57 1.73
(23) (27) (33) (35) (40) (44)
25
QX2 Rework_1160 Air Pencil
QX2
23/11/01
9:44 am
Page 40
Q X2
SYSTEMS
QX2 C o n vec t i o n Rew ork S ys tem
QX2-S-11 115V Convection Rework System QX2-SBH-11 115V Convection Rework System with Board Holder QX2-SBP-11 115V Convection Rework System with Board Holder & Pre-Heater QX2-S-21 230V Convection Rework System* QX2-SBH-21 230V Convection Rework System with Board Holder* QX2-SBP-21 230V Convection Rework System with Board Holder & Pre-Heater*
T E C H N I C A L S P E C I F I C AT I O N S
Input Voltage
QX2-S-11
QX2-S-21
90-132 VAC, 50/60 Hz
220-260 VAC, 50/60 Hz
Convection System Heater
550 W
550 W
Rated Current
5 Amps
2.5 Amps
Airflow
20-50 l/min
20-50 l/min
(Default Set Point)
662°F
350°C
Source Temperature Range
482°F - 842ºF
250°C - 450°C
SMT-1160
SMT 1160
S M T-1 160 Ho t Ai r Pen c il
Non-Contact Hot Air Rework Station W i t h i t s p r e c i s e fo r c e d a i r c o n v e c ti o n , M e tc a l ’ s S M T- 1 1 6 0 H ot Ai r Pe n c i l is d esig n ed fo r th os e rewo rk a p p l i c a t i o n s r e q u i r i n g v e r y l o w th e r m a l s t r e s s , i n c l u d i n g S M D s a nd tem pera ture- s ens itive cer am ic c a p a c i t o r s . T h i s n o n -c o n t a c t s ys te m , wi t h v ar i ab l e te m p e r at ur e fl o w, c an a ls o ca pa bly rem o ve SM T c h i p c a p a c i t o r s a n d S OI C s .
Source Temperature
T h e S M T-1 1 6 0 H o t A i r Pe n c i l i s e q u i p p e d w i t h a b r o a d r an g e o f f e at ures fo r a s s ured effectiven ess a n d s e n s i t i v i t y o f o p e r a t i o n . T h e s e i n c l u d e a n E S D - s af e ho us i ng an d ha nd- piece, va ria ble a irflow
Pre-Heater
115V CONVECTION REWORK SYSTEM INCLUDES:
Heater
950 W
950 W
Rated Current
8.5 Amps
4.5 Amps
Heating Surface
6” x 6”
152mm x 152mm
Board Temperature Range
194°F - 248°F
90°C - 120°C
Minimum Board Size
2” x 2”
50mm x 50mm
Maximum Board Size
14” x 18”
360mm x 460mm
Convection Rework System
18 lb
8.2 kg
Board Holder
5.5 lb
2.5 kg
Pre-Heater
6.4 lb
2.9 kg
Board Holder
Weights
a p p l i c a t i o n s a n d s p e c i a l i z e d s p l i t , f an an d fi n e n o z z l e op t i on s . QX2-P-11 QX2-CT AC-WT AC-RP AC-CC1 AC-CC2 AC-VC
Power Supply, 115V QX2 Controller Work Tray Nozzle Removal Pad QX2 Controller Cable Pre-Heater Control Cable Vacuum Cup Kit
(Operating)
11.5” x 20.5” x 14.2”
292mm x 521mm x 361mm
(Stored)
11.5” x 16.8” x 21.0”
292mm x 427mm x 533mm
Board Holder
20.5” x 15.0” x 5.0”
521mm x 381mm x 127mm
Pre-Heater
8.2” x 15.5” x 2.5”
208mm x 394mm x 64mm
230V CONVECTION REWORK SYSTEM INCLUDES:
QX2-P-21 QX2-CT AC-WT AC-RP AC-CC1 AC-CC2 AC-VC
Power Supply 230V* QX2 Controller Work Tray Nozzle Removal Pad QX2 Controller Cable Pre-Heater Control Cable Vacuum Cup Kit
F E AT U R E S
page 26
Component Removal Component Attachment Nozzle Attachment/Removal Other
T h e S M T-1 1 6 0 H o t A i r Pe n c i l ’ s c a p ac i t y f or n o n- c on ta c t s o l d e r i n g av o id s alig nmen t d is ruptio n a nd e l i m i n a t e s t h e r i s k o f t h e r m a l s h oc k to c o mp o n e n ts .
S M T- 1 1 6 0 H O T A I R P E N C I L
Outer Dimensions ( W x D x H ) Convection Rework System
Vacuum Operator
c o n t r o l , v a r i a b l e c l o s e d -l o o p t e mp e r a tu r e c on tr o l , a ni tr o g e n i n p u t f acilit y to s uit in er t so lderin g
Self-contained Moveable controller with: •Start/Stop button •Airflow control •Time control •LCD display •Remove/attach control Automatic component lift off and heater shut off Manual, timer controlled Push on, quick-release Auxiliary thermocouple port for component temperature monitoring
ACCESSORIES
AC-BH AC-BP-11 AC-BP-21 AC-PH-11 AC-PH-21 AC-BS
Board Holder Board Holder/Pre-Heater Kit 115V Board Holder/Pre-Heater Kit 230V* Pre-Heater 115V Pre-Heater 230V* Board Support
* 230V systems do not include power cords
System Includes Hot Air Pencil Hand-Piece, 3 Piece Nozzle Kit (NK-1060A), Workstand And Variable Temperature Module
SMT-1161-V SMT-1162-V
115V Hot Air Pencil Rework Station 230V Hot Air Pencil Rework Station
A C C E S S O R I E S & S PA R E PA R T S SHP-1060A VP-50 VTM-1 S6-025 S6-FAN S6-SOIC S6-SOL NK-1060A 17319S 16806 16844 AC-HAPWS AC-HAPWSC 16812 16813 16846
Hot Air Pencil Hand-Piece Vacuum Pencil with Nozzle kit Variable Temperature Module Fine Nozzle 0.025” (0.64mm) Fan Nozzle 0.347” x 0.030” (8.8mm x 0.76mm) Dual Nozzle 0.265” (6.7mm) Dual Nozzle 0.428” (10.9mm) 3 Piece Nozzle Kit (includes 16812, 16813, 16846) Pump Assembly Collar Sub-Assembly SHP-1060A Nipple Assembly SHP-1060A Workstand Replacement Workstand Cradle Nozzle, Oval, .101” (2.57mm) Nozzle, Round, .080” (2.03mm) Nozzle, Sharp 30°, .080” (2.03 mm)
page 27
QX2 Rework_1160 Air Pencil
QX2
23/11/01
9:44 am
Page 40
Q X2
SYSTEMS
QX2 C o n vec t i o n Rew ork S ys tem
QX2-S-11 115V Convection Rework System QX2-SBH-11 115V Convection Rework System with Board Holder QX2-SBP-11 115V Convection Rework System with Board Holder & Pre-Heater QX2-S-21 230V Convection Rework System* QX2-SBH-21 230V Convection Rework System with Board Holder* QX2-SBP-21 230V Convection Rework System with Board Holder & Pre-Heater*
T E C H N I C A L S P E C I F I C AT I O N S
Input Voltage
QX2-S-11
QX2-S-21
90-132 VAC, 50/60 Hz
220-260 VAC, 50/60 Hz
Convection System Heater
550 W
550 W
Rated Current
5 Amps
2.5 Amps
Airflow
20-50 l/min
20-50 l/min
(Default Set Point)
662°F
350°C
Source Temperature Range
482°F - 842ºF
250°C - 450°C
SMT-1160
SMT 1160
S M T-1 160 Ho t Ai r Pen c il
Non-Contact Hot Air Rework Station W i t h i t s p r e c i s e fo r c e d a i r c o n v e c ti o n , M e tc a l ’ s S M T- 1 1 6 0 H ot Ai r Pe n c i l is d esig n ed fo r th os e rewo rk a p p l i c a t i o n s r e q u i r i n g v e r y l o w th e r m a l s t r e s s , i n c l u d i n g S M D s a nd tem pera ture- s ens itive cer am ic c a p a c i t o r s . T h i s n o n -c o n t a c t s ys te m , wi t h v ar i ab l e te m p e r at ur e fl o w, c an a ls o ca pa bly rem o ve SM T c h i p c a p a c i t o r s a n d S OI C s .
Source Temperature
T h e S M T-1 1 6 0 H o t A i r Pe n c i l i s e q u i p p e d w i t h a b r o a d r an g e o f f e at ures fo r a s s ured effectiven ess a n d s e n s i t i v i t y o f o p e r a t i o n . T h e s e i n c l u d e a n E S D - s af e ho us i ng an d ha nd- piece, va ria ble a irflow
Pre-Heater
115V CONVECTION REWORK SYSTEM INCLUDES:
Heater
950 W
950 W
Rated Current
8.5 Amps
4.5 Amps
Heating Surface
6” x 6”
152mm x 152mm
Board Temperature Range
194°F - 248°F
90°C - 120°C
Minimum Board Size
2” x 2”
50mm x 50mm
Maximum Board Size
14” x 18”
360mm x 460mm
Convection Rework System
18 lb
8.2 kg
Board Holder
5.5 lb
2.5 kg
Pre-Heater
6.4 lb
2.9 kg
Board Holder
Weights
a p p l i c a t i o n s a n d s p e c i a l i z e d s p l i t , f an an d fi n e n o z z l e op t i on s . QX2-P-11 QX2-CT AC-WT AC-RP AC-CC1 AC-CC2 AC-VC
Power Supply, 115V QX2 Controller Work Tray Nozzle Removal Pad QX2 Controller Cable Pre-Heater Control Cable Vacuum Cup Kit
(Operating)
11.5” x 20.5” x 14.2”
292mm x 521mm x 361mm
(Stored)
11.5” x 16.8” x 21.0”
292mm x 427mm x 533mm
Board Holder
20.5” x 15.0” x 5.0”
521mm x 381mm x 127mm
Pre-Heater
8.2” x 15.5” x 2.5”
208mm x 394mm x 64mm
230V CONVECTION REWORK SYSTEM INCLUDES:
QX2-P-21 QX2-CT AC-WT AC-RP AC-CC1 AC-CC2 AC-VC
Power Supply 230V* QX2 Controller Work Tray Nozzle Removal Pad QX2 Controller Cable Pre-Heater Control Cable Vacuum Cup Kit
F E AT U R E S
page 26
Component Removal Component Attachment Nozzle Attachment/Removal Other
T h e S M T-1 1 6 0 H o t A i r Pe n c i l ’ s c a p ac i t y f or n o n- c on ta c t s o l d e r i n g av o id s alig nmen t d is ruptio n a nd e l i m i n a t e s t h e r i s k o f t h e r m a l s h oc k to c o mp o n e n ts .
S M T- 1 1 6 0 H O T A I R P E N C I L
Outer Dimensions ( W x D x H ) Convection Rework System
Vacuum Operator
c o n t r o l , v a r i a b l e c l o s e d -l o o p t e mp e r a tu r e c on tr o l , a ni tr o g e n i n p u t f acilit y to s uit in er t so lderin g
Self-contained Moveable controller with: •Start/Stop button •Airflow control •Time control •LCD display •Remove/attach control Automatic component lift off and heater shut off Manual, timer controlled Push on, quick-release Auxiliary thermocouple port for component temperature monitoring
ACCESSORIES
AC-BH AC-BP-11 AC-BP-21 AC-PH-11 AC-PH-21 AC-BS
Board Holder Board Holder/Pre-Heater Kit 115V Board Holder/Pre-Heater Kit 230V* Pre-Heater 115V Pre-Heater 230V* Board Support
* 230V systems do not include power cords
System Includes Hot Air Pencil Hand-Piece, 3 Piece Nozzle Kit (NK-1060A), Workstand And Variable Temperature Module
SMT-1161-V SMT-1162-V
115V Hot Air Pencil Rework Station 230V Hot Air Pencil Rework Station
A C C E S S O R I E S & S PA R E PA R T S SHP-1060A VP-50 VTM-1 S6-025 S6-FAN S6-SOIC S6-SOL NK-1060A 17319S 16806 16844 AC-HAPWS AC-HAPWSC 16812 16813 16846
Hot Air Pencil Hand-Piece Vacuum Pencil with Nozzle kit Variable Temperature Module Fine Nozzle 0.025” (0.64mm) Fan Nozzle 0.347” x 0.030” (8.8mm x 0.76mm) Dual Nozzle 0.265” (6.7mm) Dual Nozzle 0.428” (10.9mm) 3 Piece Nozzle Kit (includes 16812, 16813, 16846) Pump Assembly Collar Sub-Assembly SHP-1060A Nipple Assembly SHP-1060A Workstand Replacement Workstand Cradle Nozzle, Oval, .101” (2.57mm) Nozzle, Round, .080” (2.03mm) Nozzle, Sharp 30°, .080” (2.03 mm)
page 27
QX2 Rework_1160 Air Pencil
Metcal
23/11/01
9:44 am
Page 42
M et cal
M e t c a l Pr od u c t Lin e s
G lo ba l
Met cal Gl oba l Loca t io n s
A r r a y Pa c k a g e R e w o r k
M e n l o Pa r k , C a l i fo r n i a , i s h o me to M e tc a l ’s c or p or a te h e ad qu ar ters , a nd t he cent ra l lo ca tio n fo r
M etc a l A rra y Pa c k a ge R ewo rk s y s tem s a re a d va n c ed , versa t i l e m a c h i n es o ffe r i n g t h e r e p e a t a b i l i t y,
r e s e a r c h a n d d e v e l o p m e n t , m an u f ac t ur i n g a nd ad mi n i s t r at i on.
a c c ura c y a nd therm a l c o ntro l es s enti a l fo r t h e sa fe a n d effec t i ve rewo rk o f t o d a y ’ s l e a d i n g e d g e B G A , C S P, La nd Gri p A rra y (LGA ), m i c ro S M D , M i c ro -l ea d Fra m e (M L F ) a n d Bu m p ed C h i p C o m p o n e n t p a c k a g e s .
To m e e t t h e n e e d s of c u s t om e r s th r ou g h ou t t h e w or l d , M e tca l h a s s ales , s er vice a nd d is tr ibu tio n
Fo r m o re i nfo rm a ti o n o n the ful l l i ne o f M et c a l A rra y Pa c k a g e Rewo rk p ro d u c t s, v i s i t www. m e t c a l . c o m ,
c e n t e r s i n N o r t h A m e r i c a , A s i a, a nd E u r o p e . D r a wi n g o n i ts o rga niza tio n al s tren gt hs an d ind us tr y
o r c o nta c t y o ur l o c a l M etc a l rep res enta ti ve.
e x p e r i e n c e , M e t c a l ’ s di s tr i b u t i on ne tw or k of fe r s s e a m l e s s , pro a ctive su ppo r t a nd a ccess to th e c o m p a n y ’ s fu l l r a n g e o f p r o du c t s - a r o un d th e g l o b e .
W h e r e v e r e l e c t r o n i c s ma n u fa c tu r i n g f ac i l i t i e s ar e l o c a te d , M etca l’ s net wo rk o f ex per tly tra ined d i s t r i b u t o r s i s t h e r e , t o s u p p l y e s s e nti a l te c h n i c a l s u p p o r t a nd a d va nced p roces s so lu tio ns .
Fume Extraction Fo r the s a fety o f y o ur o p era to rs a nd wo rk i n g en vi ro n m en t , M et c a l o ffers a fu l l l i n e o f fu m e e x t r a c t i o n s y s tem s . Fro m vo l um e to ti p to b enc h-t o p fu m e ex t ra c t i o n , M et c a l h a s sy st em s t o p u r i f y t h e a i r b y fi l teri ng ha rm ful s m o ke a nd p a r ti c ul a tes fro m t h e wo rk i n g a rea . Fu m e ex t ra c t i o n s y s t e m s a r e a l s o u s e fu l fo r ex tra c ti ng po tenti a l l y no x i o us fum es fro m t h e u se o f c er t a i n a d h esi ves a n d c h e m i c a l s o n t h e w o r k b e n c h . Fo r m o r e i n f o r m a t i o n o n t h e f u l l l i n e o f M e t c a l Fu m e E x t r a c t i o n p r o d u c t s , v i s i t www.m etc a l .c o m , o r c o nta c t y o ur l o c a l M et c a l rep resen t a t i ve. Metcal Headquarters
Europe Headquarters
Asia Headquarters
France
1530 O'Brien Drive
OK International Ltd
OK International Taiwan Ltd
OK International SA
Menlo Park, CA 94025
Eagle Close, Chandler's Ford
5F No. 79 Sec. 1
Rue Ampere - ZI Lyon Nord
USA
Hampshire, SO53 4NF U.K.
Hsin-Tai-Wu Road, His-Chih
69730 Genay, France
Phone: +1 650-325-3291
Phone: +44 23 8048 9100
Taipei Hsien, Taiwan
Phone: +33 (0)4 72 08 75 75
Fax: +1 650-325-5932
Fax: +44 23 8048 9109
Phone: 886-2-2698 4013
Fax: +33 (0)4 72 08 75 70
Fax: 886-2-2698 4021
Germany
page 28
Italy
China
Japan
OK International GmbH
OK International Spa
OK International China
OK International Japan Ltd
Frankfurter Strasse 74
Strada Statale 11 -No. 28,
No. 22 Chao Yang Men Wai Avenue
2F ASK Bldg.
D-64521 Gross-Gerau
20010 Vittuone (Milano),
Beijing Prime Tower, Room 1901
1-24-4 Ebisu
Germany
Italia
Chao Yang District,
Shibuya-Ku
Phone: +49 (0) 61 52-71 12-0
Phone: +39 02 9025161
Beijing, P. R. China 100020
Tokyo 150-0013, Japan
Fax: +49 (0) 61 52-71 12-22
Fax: +39 02 90111147
Phone: +86 10 6588 3360
Phone: +81-3-3449-7451
Fax: +86 10 6588 3359
Fax: +81-3-3440-2010
©2 0 0 1 D ela wa r e Ca p ita l For m at io n, In c. All R ig ht s R ese r v ed. D OV E R a nd th e Do v e r l o go are re g is te re d t ra de m ark s o f D ela wa r e Ca p ita l Fo r m a tion , I nc., a w hol ly- o wne d su b si di ar y o f Dov e r Co rpo r at i o n .
QX2 Rework_1160 Air Pencil
Metcal
23/11/01
9:44 am
Page 42
M et cal
M e t c a l Pr od u c t Lin e s
G lo ba l
Met cal Gl oba l Loca t io n s
A r r a y Pa c k a g e R e w o r k
M e n l o Pa r k , C a l i fo r n i a , i s h o me to M e tc a l ’s c or p or a te h e ad qu ar ters , a nd t he cent ra l lo ca tio n fo r
M etc a l A rra y Pa c k a ge R ewo rk s y s tem s a re a d va n c ed , versa t i l e m a c h i n es o ffe r i n g t h e r e p e a t a b i l i t y,
r e s e a r c h a n d d e v e l o p m e n t , m an u f ac t ur i n g a nd ad mi n i s t r at i on.
a c c ura c y a nd therm a l c o ntro l es s enti a l fo r t h e sa fe a n d effec t i ve rewo rk o f t o d a y ’ s l e a d i n g e d g e B G A , C S P, La nd Gri p A rra y (LGA ), m i c ro S M D , M i c ro -l ea d Fra m e (M L F ) a n d Bu m p ed C h i p C o m p o n e n t p a c k a g e s .
To m e e t t h e n e e d s of c u s t om e r s th r ou g h ou t t h e w or l d , M e tca l h a s s ales , s er vice a nd d is tr ibu tio n
Fo r m o re i nfo rm a ti o n o n the ful l l i ne o f M et c a l A rra y Pa c k a g e Rewo rk p ro d u c t s, v i s i t www. m e t c a l . c o m ,
c e n t e r s i n N o r t h A m e r i c a , A s i a, a nd E u r o p e . D r a wi n g o n i ts o rga niza tio n al s tren gt hs an d ind us tr y
o r c o nta c t y o ur l o c a l M etc a l rep res enta ti ve.
e x p e r i e n c e , M e t c a l ’ s di s tr i b u t i on ne tw or k of fe r s s e a m l e s s , pro a ctive su ppo r t a nd a ccess to th e c o m p a n y ’ s fu l l r a n g e o f p r o du c t s - a r o un d th e g l o b e .
W h e r e v e r e l e c t r o n i c s ma n u fa c tu r i n g f ac i l i t i e s ar e l o c a te d , M etca l’ s net wo rk o f ex per tly tra ined d i s t r i b u t o r s i s t h e r e , t o s u p p l y e s s e nti a l te c h n i c a l s u p p o r t a nd a d va nced p roces s so lu tio ns .
Fume Extraction Fo r the s a fety o f y o ur o p era to rs a nd wo rk i n g en vi ro n m en t , M et c a l o ffers a fu l l l i n e o f fu m e e x t r a c t i o n s y s tem s . Fro m vo l um e to ti p to b enc h-t o p fu m e ex t ra c t i o n , M et c a l h a s sy st em s t o p u r i f y t h e a i r b y fi l teri ng ha rm ful s m o ke a nd p a r ti c ul a tes fro m t h e wo rk i n g a rea . Fu m e ex t ra c t i o n s y s t e m s a r e a l s o u s e fu l fo r ex tra c ti ng po tenti a l l y no x i o us fum es fro m t h e u se o f c er t a i n a d h esi ves a n d c h e m i c a l s o n t h e w o r k b e n c h . Fo r m o r e i n f o r m a t i o n o n t h e f u l l l i n e o f M e t c a l Fu m e E x t r a c t i o n p r o d u c t s , v i s i t www.m etc a l .c o m , o r c o nta c t y o ur l o c a l M et c a l rep resen t a t i ve. Metcal Headquarters
Europe Headquarters
Asia Headquarters
France
1530 O'Brien Drive
OK International Ltd
OK International Taiwan Ltd
OK International SA
Menlo Park, CA 94025
Eagle Close, Chandler's Ford
5F No. 79 Sec. 1
Rue Ampere - ZI Lyon Nord
USA
Hampshire, SO53 4NF U.K.
Hsin-Tai-Wu Road, His-Chih
69730 Genay, France
Phone: +1 650-325-3291
Phone: +44 23 8048 9100
Taipei Hsien, Taiwan
Phone: +33 (0)4 72 08 75 75
Fax: +1 650-325-5932
Fax: +44 23 8048 9109
Phone: 886-2-2698 4013
Fax: +33 (0)4 72 08 75 70
Fax: 886-2-2698 4021
Germany
page 28
Italy
China
Japan
OK International GmbH
OK International Spa
OK International China
OK International Japan Ltd
Frankfurter Strasse 74
Strada Statale 11 -No. 28,
No. 22 Chao Yang Men Wai Avenue
2F ASK Bldg.
D-64521 Gross-Gerau
20010 Vittuone (Milano),
Beijing Prime Tower, Room 1901
1-24-4 Ebisu
Germany
Italia
Chao Yang District,
Shibuya-Ku
Phone: +49 (0) 61 52-71 12-0
Phone: +39 02 9025161
Beijing, P. R. China 100020
Tokyo 150-0013, Japan
Fax: +49 (0) 61 52-71 12-22
Fax: +39 02 90111147
Phone: +86 10 6588 3360
Phone: +81-3-3449-7451
Fax: +86 10 6588 3359
Fax: +81-3-3440-2010
©2 0 0 1 D ela wa r e Ca p ita l For m at io n, In c. All R ig ht s R ese r v ed. D OV E R a nd th e Do v e r l o go are re g is te re d t ra de m ark s o f D ela wa r e Ca p ita l Fo r m a tion , I nc., a w hol ly- o wne d su b si di ar y o f Dov e r Co rpo r at i o n .
Cover and contents
22/11/01
2:04 pm
Page 2
Precision Systems for the Electronics Bench
SOLDERING, DESOLDERING AND REWORK SYSTEMS
Precision Systems for the Electronics Bench
WORLD HEADQUARTERS AND NORTH AMERICAN OFFICE
1530 O’BRIEN DRIVE • MENLO PARK • CA 94025 • USA TEL: +1 650-325-3291 • FAX: +1 650-325-5932 www.metcal.com MET-US-001
