Schmidt Engineering and Equipment, Inc. 1905 South Moorland Road, New Berlin, WI 53151-2321 USA Phone 1-262-784-6066 Fax: 1-262-784-6720 Web Site: www.wausau-everest.com Email: [email protected]

WAUSAU HOME SAFE PLOW MODELS HSP, HSS, AND HW

PARTS MANUAL

ORIGINAL ISSUE REV — SEPTEMBER 24, 2007 This document and all information and expression contained herein are the property of Schmidt Engineering and Equipment, Inc. It may not be used, duplicated, or disclosed for any purpose without prior written permission of Schmidt Engineering and Equipment. All rights reserved.

Revision History Rev

By

Approved

Date

Revision Summary

—

JRJ

AF

September 24, 2007

Initial issue.

This document and all information and expression contained herein are the property of Schmidt Engineering and Equipment, Inc. It may not be used, duplicated, or disclosed for any purpose without prior written permission of Schmidt Engineering and Equipment. All rights reserved.

ii

Table of Contents HOW TO USE THIS MANUAL.................................................................................................................. v PAGE NUMBER ....................................................................................................................................... v LOCATING MATERIAL IN THIS MANUAL............................................................................................... v HOW TO USE THIS ILLUSTRATED PARTS CATALOG ........................................................................ vi ACRONYMS AND ABBREVIATIONS.....................................................................................................viii 1.

PLOW AND MOLDBOARD ASSEMBLIES........................................................................................1

2.

HOT WING MOLDBOARD ASSEMBLIES ........................................................................................6 2.1 Right Hand - Flared Moldboard Assemblies ............................................................................9

3.

RUBBER AND POLYURETHANE DEFLECTOR KITS ...................................................................12 3.1 Hot Wing Rubber Deflectors ..................................................................................................14 3.1.1 Hot Wing, Straight, Rubber Deflector Kits..............................................................................14 3.1.2 Hot Wing, 90 Degree, Rubber Deflector Kit ...........................................................................16

4.

AIRFOIL (OPTIONAL EQUIPMENT)...............................................................................................19

5.

CASTER WHEEL ASSEMBLIES.....................................................................................................20 5.1 Caster Wheel Assembly.........................................................................................................20 5.2 8” Caster Wheel Assembly ....................................................................................................22 5.3 8” Caster Wheel Assembly, Adjustable..................................................................................24 5.4 10” Caster Wheel Assembly, Adjustable................................................................................26 5.5 8” Caster and Shoe Mounting Kit (15 or 19” Pin Height) .......................................................28 5.6 8” Caster and Shoe Mounting Kit (8” Top Punched C.E., 15 or 19” Pin Height)....................30 5.7 Snow Wheel Kit......................................................................................................................32

6.

MUSHROOM SHOE ASSEMBLIES ................................................................................................34 6.1 Mushroom Shoe Assembly, Bolt Adjustment.........................................................................34 6.2 Mushroom Shoe Assembly, Screw Adjustment .....................................................................36

7.

MOLDBOARD WEAR SHOE KITS..................................................................................................38

8.

LIFT LINK ASSEMBLY ....................................................................................................................40 8.1 Lift Chain Weldment...............................................................................................................41 8.2 Level Lift Kit, Two Chain ........................................................................................................42 8.3 Level Lift Kit, Pulley Block Style.............................................................................................44 8.4 Tension Spring, Lift Chain Assembly (Optional Equipment) ..................................................45

9.

CURB GUARD KIT (OPTIONAL EQUIPMENT) ..............................................................................46 9.1 Parking Stands.......................................................................................................................47

10. CYLINDERS ....................................................................................................................................51 10.1 Reversing Cylinder, Single Acting, Nitride (Optional Equipment) ..........................................51 10.2 Standard Cylinder Parts List ..................................................................................................52 10.3 Reversing Cylinder, Double Acting, Nitride (Optional Equipment).........................................53 11. HYDRAULIC LINE KITS ..................................................................................................................55 This document and all information and expression contained herein are the property of Schmidt Engineering and Equipment, Inc. It may not be used, duplicated, or disclosed for any purpose without prior written permission of Schmidt Engineering and Equipment. All rights reserved.

iii

11.1 11.1.1 11.1.2 11.1.3 11.1.4

Hydraulic Line Kit with DA Cylinders and Cushion Valve ......................................................55 Hydraulic Line Kit with DA Cylinders and Cushion Valve Parts List ......................................56 Hydraulic Line Kit with DA Cylinders Parts List......................................................................57 Hydraulic Line Kit with Cushion Valve Mounting Parts List....................................................58 Hydraulic Line Kit with Flow Restrictors.................................................................................59 List of Figures

Figure 1. Home Safe Plow Assembly ......................................................................................................1 Figure 2. Hot Wing Moldboard Assembly ................................................................................................6 Figure 3. Right Hand - Flared Moldboard Assembly................................................................................9 Figure 4. Rubber and Polyurethane Deflector Kits ................................................................................12 Figure 5. Hot Wing, Straight, Rubber Deflector Kits ..............................................................................14 Figure 6. Hot Wing, 90 Degree, Rubber Deflector Kit............................................................................16 Figure 7. Airfoil (Optional Equipment)....................................................................................................19 Figure 8. Caster Wheel Assembly .........................................................................................................20 Figure 9. 8” Caster Wheel Assembly .....................................................................................................22 Figure 10. 8” Caster Wheel Assembly, Adjustable ................................................................................24 Figure 11. 10” Caster Wheel Assembly, Adjustable ..............................................................................26 Figure 12. 8” Caster and Shoe Mounting Kit (15 or 19” Pin Height) ......................................................28 Figure 13. 8” Caster and Shoe Mounting Kit (8” Top Punched, 15 or 19” Pin Height)...........................30 Figure 14. Snow Wheel Mounting Kit.....................................................................................................32 Figure 15. Mushroom Shoe Assembly, Bolt Adjustment........................................................................34 Figure 16. Mushroom Shoe Assembly, Screw Adjustment....................................................................36 Figure 17. Moldboard Wear Shoe Kit.....................................................................................................38 Figure 18. Lift Link Assembly.................................................................................................................40 Figure 19. Lift Chain Weldment .............................................................................................................41 Figure 20. Level Lift Kit, 2-Chain............................................................................................................42 Figure 21. Level Lift Kit, Pulley Block Style............................................................................................44 Figure 22. Tension Spring, Lift Chain Assembly (Optional Equipment).................................................45 Figure 23. Curb Guard Kit......................................................................................................................46 Figure 24. Parking Stand w/Mounting Brackets.....................................................................................47 Figure 25. Parking Stand w/Mounting Brackets (A-Frame) ...................................................................49 Figure 26. Reversing Cylinder, Single Acting, Nitride (Optional Equipment) .........................................51 Figure 27. Reversing Cylinder, Double Acting, Nitride (Optional Equipment)........................................53 Figure 28. Hydraulic Line Kit with DA Cylinders and Cushion Valve .....................................................55 Figure 29. Hydraulic Line Kit with Flow Restrictors................................................................................59 List of Tables Table 1. Torque Specification Chart ....................................................................................................... vi

This document and all information and expression contained herein are the property of Schmidt Engineering and Equipment, Inc. It may not be used, duplicated, or disclosed for any purpose without prior written permission of Schmidt Engineering and Equipment. All rights reserved.

iv

HOW TO USE THIS MANUAL The documentation for the Schmidt Engineering and Equipment Home Safe Plow is organized by Volume, Section, Figure (or Subsection), and Page. Below is a brief description: Volume

Section

1 – Operator’s/Maintenance Manual

—

Description Refer to the Table of Contents for Section Definition and Content Safety Notes, How to Use This Manual, Abbreviations, Index, and General Information Plow and Moldboard Assemblies Hot Wing Moldboard Assemblies Rubber/Poly Deflector Kits Air Foil Caster Wheel Assemblies Mushroom Shoe Assemblies Moldboard Wear Shoe Kits Lift Link Assembly Curb Guard Kit Cylinders Hydraulic Line Kits —

Introduction

2 – Parts Catalog

1 2 3 4 5 6 7 8 9 10 11 Appendices

PAGE NUMBER Each section in the manual is numbered separately from the rest of the manual. The model number, page number, and revision of the manual are located on the lower center of the page in the footer. LOCATING MATERIAL IN THIS MANUAL Go to the section that contains the information required. Each section has a detailed table of contents on the first page. Find the specific subject and page in the table of contents.

This document and all information and expression contained herein are the property of Schmidt Engineering and Equipment, Inc. It may not be used, duplicated, or disclosed for any purpose without prior written permission of Schmidt Engineering and Equipment. All rights reserved.

v

HOW TO USE THIS ILLUSTRATED PARTS CATALOG This Illustrated Parts Catalog has been prepared as a detailed parts guide for the Schmidt Engineering and Equipment Home Safe Plow. The information in this manual is presented in a generic form and is intended only for parts illustration. For actual operating/maintenance information, refer to the Operation and Maintenance manual. Replaceable items and/or kits for the unit are detailed on illustrations throughout this manual. The item numbers on the illustration are keyed to each accompanying parts list. The purpose of the item numbers is to provide complete identification, but should not be used for procurement purposes. Some components are covered in separate publications furnished by the component manufacturer (e.g. hydrostatic pump, water pump, etc). These publications are furnished in Appendices and referenced when required. NOTES: Do not use damaged or broken parts. Use only authorized parts and components. Do not use unapproved lubricants/fluids. Use at a minimum, Grade 8 attaching hardware except where noted. For installation safety, substitution of lower grade hardware is NOT recommended or approved. Table 1. Torque Specification Chart SAE Grade 8 Bolts Course Max. Torque Dry Thread (lbs-ft) 5/16 25 3/8 45 7/16 70 1/2 110 9/16 150 5/8 220 3/4 380 7/8 600 1.00 900 1-1/8 1,280 1-1/4 1,820 1-3/8 2,380 1-1/2 3,160

Fine Thread 5/16 3/8 7/16 1/2 9/16 5/8 3/4 7/8 1.00 1-1/8 1-1/4 1-3/8 1-1/2

Max. Torque Dry (lbs-ft) 25 50 80 120 170 240 420 660 1,000 1,440 2,000 2,720 3,560

BOLT HEAD IDENTIFICATION

This document and all information and expression contained herein are the property of Schmidt Engineering and Equipment, Inc. It may not be used, duplicated, or disclosed for any purpose without prior written permission of Schmidt Engineering and Equipment. All rights reserved.

vi

This manual uses the indented parts structure. In the descriptive column, the relationship of items covered is shown by the degree of indention of each item. In the example below, the poly plow assembly is listed with one indentation. The curb guard weldment, carriage bolt, and hex nut are indented under the curb guard kit to indicate that these are sub components of the curb guard kit. Ordering the curb guard kit would automatically include the curb guard weldment, carriage bolt, and hex nut. Components listed with the same indentation must be ordered separately. ITEM PART NUMBER 2K-12324 1 2W-12323 2 9C-00077 3 9C-00096

DESCRIPTION CURB GUARD KIT • CURB GUARD-WELDMENT • CARRIAGE BOLT-5/8 NC X 3-1/2 LG • HEX NUT-5/8 NC

QTY 1 2 6 6

NOTES

•

Item – Identifies part from illustration

•

Part Number – Part number to be used for procurement

•

Description – Part name and relationship to assembly

•

Quantity – Gives quantity required for assembly (see notes about attaching hardware)

•

Notes – Directs user to additional information when ordering

There are three distinct types of figure designations in this manual: Installations identify assemblies and components related by application such as attaching hardware. These items must be individually ordered; there is no single part number that includes all parts shown. Assemblies are part listings that are inclusive of all parts described. When the main assembly is ordered, the sub components are included as part of the order. The third type of figure is a Listing that contains similar but unrelated parts. Each part must be ordered separately. NOTE: If a component is damaged, make repairs immediately. Do not continue to operate machine.

This document and all information and expression contained herein are the property of Schmidt Engineering and Equipment, Inc. It may not be used, duplicated, or disclosed for any purpose without prior written permission of Schmidt Engineering and Equipment. All rights reserved.

vii

ACRONYMS AND ABBREVIATIONS The following is a list of terms and abbreviations that may appear in description and drawing nomenclature. AC ADJ AR ALT AMP APPX ASSY or ASSM AUX AWG CARR C.E. CM CYL DC DIA EA FHMS FLG HD GA GND GPM HHCS HHMS HYD ID KG LH MAX MISC MM NP NPT OBS OD OEM PHMS PLCS POLY PSI PSIA

Alternating Current Adjustment As Required Alternate Ampere Approximately Assembly Auxiliary American Wire Gauge Carriage Cutting Edge Centimeter Cylinder Direct Current Diameter Each Flat Head Machine Screw Flange Head Gage Ground (electrical) Gallons Per Minute Hex Head Cap Screw Hex Head Machine Screw Hydraulic Inside Diameter Kilograms Left Hand Maximum Miscellaneous Millimeter Non Procurable National Pipe Thread Obsolete Outside Diameter Original Equipment Manufacturer Pan Head Machine Screw Places Polyethylene Pounds per Square Inch Pounds per Square Inch Absolute

This document and all information and expression contained herein are the property of Schmidt Engineering and Equipment, Inc. It may not be used, duplicated, or disclosed for any purpose without prior written permission of Schmidt Engineering and Equipment. All rights reserved.

viii

PSIG QTY RH RPM SHCS SHSS TYP WELD’T or WLDMT

Pounds per Square Inch Gauge Quantity Right Hand Revolutions Per Minute Socket Head Cap Screw Socket Head Set Screw Typical Weldment

This document and all information and expression contained herein are the property of Schmidt Engineering and Equipment, Inc. It may not be used, duplicated, or disclosed for any purpose without prior written permission of Schmidt Engineering and Equipment. All rights reserved.

ix

1. PLOW AND MOLDBOARD ASSEMBLIES Figure 1. Home Safe Plow Assembly

HSP Rev — 1

ITEM

PART NUMBER DESCRIPTION REF HOME SAFE PLOW ASSEMBLY POLYURETHANE MOLDBOARD ASSEMBLIES 2A-10131-01 • MOLDBOARD ASSEMBLY, HSP3610 2W-10128 • MOLDBOARD WELD’T, HSP3610 2A-10169-01 • MOLDBOARD ASSEMBLY, HSP3611 2W-10170 • MOLDBOARD WELD’T, HSP3611 2A-10241-01 • MOLDBOARD ASSEMBLY, HSP3612 2W-10240 • MOLDBOARD WELD’T, HSP3612 2A-16102 • MOLDBOARD ASSEMBLY, HSP3614 2W-16100 • MOLDBOARD WELD’T, HSP3614 2A-10099-01 • MOLDBOARD ASSEMBLY, HSP4210 2W-10100 • MOLDBOARD WELD’T, HSP4210 1 2A-10074-01 • MOLDBOARD ASSEMBLY, HSP4211 2W-10073 • MOLDBOARD WELD’T, HSP4211 2A-10085-01 • MOLDBOARD ASSEMBLY, HSP4212 2W-10086 • MOLDBOARD WELD’T, HSP4212 2A-13725 • MOLDBOARD ASSEMBLY, HSP4214 2W-13726 • MOLDBOARD WELD’T, HSP4214 2A-14894 • MOLDBOARD ASSEMBLY, HSP4811 2W-14892 • MOLDBOARD WELD’T, HSP4811 2A-14980 • MOLDBOARD ASSEMBLY, HSP4812 2W-14489 • MOLDBOARD WELD’T, HSP4812 STEEL MOLDBOARD ASSEMBLIES 1 2A-09821-02 • STEEL MOLDBOARD ASSEMBLY, HSS3610 2W-09882 • MOLDBOARD WELD’T, HSS3610 • STEEL MOLDBOARD ASSEMBLY, CUT 2A-16355 BACK, HSS3611 2W-16350 • MOLDBOARD WELD’T, HSS3611 2A-09894-01 • STEEL MOLDBOARD ASSEMBLY, HSS3611 2W-09867 • MOLDBOARD WELD’T, HSS3611 2A-10238-01 • STEEL MOLDBOARD ASSEMBLY, HSS3612 2W-10237 • MOLDBOARD WELD’T, HSS3612 2A-10116-01 • STEEL MOLDBOARD ASSEMBLY, HSS4210 2W-10117 • MOLDBOARD WELD’T, HSS4210 2A-09894-02 • STEEL MOLDBOARD ASSEMBLY, HSS4211 2W-09890 • MOLDBOARD WELD’T, HSS4211 2A-14487 • STEEL MOLDBOARD ASSEMBLY, HSS4211 2W-14486 • MOLDBOARD WELD’T, HSS4211 2A-10094-01 • STEEL MOLDBOARD ASSEMBLY, HSS4212 2W-10095 • MOLDBOARD WELD’T, HSS4212 2A-14490 • STEEL MOLDBOARD ASSEMBLY, HSS4212 2W-14489 • MOLDBOARD WELD’T, HSS4212 2A-15192 • STEEL MOLDBOARD ASSEMBLY, HSS4213 HSP Rev — 2

QTY 1 1 — 1 — 1 — 1 — 1 — 1 — 1 — 1 — 1 — 1 — 1 — 1 — 1 — 1 — 1 — 1 — 1 — 1 — 1 — 1

NOTES

ITEM

PART NUMBER 2W-15193 2A-13966 2W-13965 CUTTING EDGE KITS 2 2K-03483-002 2K-03405-002 2P-01297 2P-01297-02 2P-04352 2P-02066 2P-02066-02 2P-02066-03 2K-03483-003 2K-03405-003 2P-04384-002 2P-10058 2P-04384 2P-02038-001 2P-02038-002 2P-02038-003 2K-03483-004 2K-03405-004 2P-10093 2P-14146 2P-06712 2P-02170 2P-02170-02

DESCRIPTION • MOLDBOARD WELD’T, HSS4213 • STEEL MOLDBOARD ASSEMBLY, HSS4214 • MOLDBOARD WELD’T, HSS4214 • 10’ CARBIDE C.E. 3/4 X 6” X (2-3’, 1-4’) • 10’ RUBBER C.E. 1-1/2 X 10’ (SLOTTED) • 10’ STEEL C.E. 1/2 X 8" X 10' (CENTER PUNCHED) • 10’ STEEL C.E. 5/8 X 8" X 10' (CENTER PUNCHED) • 10’ STEEL C.E. 3/4 X 8" X 10' (CENTER PUNCHED) • 10’ STEEL C.E. 1/2 X 6" X 10' (TOP PUNCHED) • 10’ STEEL C.E. 5/8 X 6" X 10' (TOP PUNCHED) • 10’ STEEL C.E. 3/4 X 6" X 10' (TOP PUNCHED) • 11’ CARBIDE C.E. 3/4 X 6” X (1-3’, 2-4’) • 11’ RUBBER C.E. 1-1/2 X 11’ (SLOTTED) • 11’ STEEL C.E. 1/2 X 8" X 11' (CENTER PUNCHED) • 11’ STEEL C.E. 5/8 X 8" X 11' (CENTER PUNCHED) • 11’ STEEL C.E. 3/4 X 8" X 11' (CENTER PUNCHED) • 11’ STEEL C.E. 1/2 X 6" X 11' (TOP PUNCHED) • 11’ STEEL C.E. 5/8 X 6" X 11' (TOP PUNCHED) • 11’ STEEL C.E. 3/4 X 6" X 11' (TOP PUNCHED) • 12’ CARBIDE C.E. 3/4 X 6” X (2-3’, 2-4’) • 12’ RUBBER C.E. 1-1/2 X 12’ (SLOTTED) • 12’ STEEL C.E. 1/2 X 8" X 12' (CENTER PUNCHED) • 12’ STEEL C.E. 5/8 X 8" X 12' (CENTER PUNCHED) • 12’ STEEL C.E. 3/4 X 8" X 12' (CENTER PUNCHED) • 12’ STEEL C.E. 1/2 X 6" X 12' (TOP PUNCHED) • 12’ STEEL C.E. 5/8 X 6" X 12' (TOP PUNCHED) HSP Rev — 3

QTY — 1 — 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

NOTES

ITEM

PART NUMBER

DESCRIPTION • 12’ STEEL C.E. 3/4 X 6" X 12' (TOP 2P-02170-03 PUNCHED) 2K-03483-005 • 14’ CARBIDE C.E. 3/4 X 6” X (2-3’, 2-4’) 2K-03405-020 • 14’ RUBBER C.E. 1-1/2 X 14’ (SLOTTED) • 14’ STEEL C.E. 1/2 X 8" X 14' (CENTER 2P-13731 PUNCHED) • 14’ STEEL C.E. 5/8 X 8" X 14' (CENTER 2P-13731-01 PUNCHED) • 14’ STEEL C.E. 1/2 X 6" X 14' (TOP 2P-02594 PUNCHED) • 14’ STEEL C.E. 3/4 X 6" X 14' (TOP 2P-02594-03 PUNCHED) POLYURETHANE MOLDBOARD SHEETS 2P-10130 • POLY MOLDBOARD SHEET - HSP3610 2P-10171 • POLY MOLDBOARD SHEET - HSP3611 2P-10239 • POLY MOLDBOARD SHEET - HSP3612 2P-16103 • POLY MOLDBOARD SHEET - HSP3614 2P-10102 • POLY MOLDBOARD SHEET - HSP4210 3 2P-10075 • POLY MOLDBOARD SHEET - HSP4211 2P-10088 • POLY MOLDBOARD SHEET - HSP4212 2P-13728 • POLY MOLDBOARD SHEET - HSP4214 2P-14893 • POLY MOLDBOARD SHEET - HSP4811 2P-14978 • POLY MOLDBOARD SHEET - HSP4812 TRIP EDGE WELDMENTS • HINGE, TRIP EDGE WLDMT, HSP3610, 2W-09825 HSP4210 • HINGE, TRIP EDGE WLDMT, HSP3611, 2W-09871 HSP4211, AND HSP4811 4 • HINGE, TRIP EDGE WLDMT, HSP3612, 2W-10080 HSP4212, AND HSP4812 • HINGE, TRIP EDGE WLDMT, HSP3614, 2W-13727 HSP4214 5 9C-07057 • SPRING-TRIP 6 2P-09841 • KEEPER, SPRING 7 9C-01198 • BOLT, CARRIAGE, 5/8 NC X 2-1/2 LG 8 9C-00265 • HHCS, 5/8 NC X 2-3/4 LG GR8 9 9C-07123 • HHCS, 5/8 NC X 5" LG FULL THD 10 9C-00645 • NUT, 5/8 NC ELASTIC STOP 11 2P-09591 • WASHER, PIVOT 12 9C-00141 • LOCK WASHER, 3/4 13 9C-00282 • HHCS, 3/4 NC X 1-3/4" LG GR8 14 2W-09865 • TRUSS, FRAME WELDMENT 15 2W-09885 • A-FRAME OSCILLATING WELDMENT HSP Rev — 4

QTY

NOTES

1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 1 1 1 1 1 1 AR AR AR 2 AR AR 1 1 1 1 1

1.

ITEM 16 17

PART NUMBER 2W-14596 4P-06880 2W-09866 2W-10200

18

2W-11184 2W-10175 2W-14394

19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39

9C-07108 2P-09863 2P-09864 9C-00237 9C-00137 9C-00737 9C-00579 9C-02326 9C-07062 9C-00652 2P-09835 2P-09876 2P-10092 2P-13730 9C-00167 9C-00168 9C-00582 9C-00587 9C-01086 2P-14598 2P-10103 2P-10076 2P-10089 2P-13729 9C-00139 9C-00096 9C-00073

DESCRIPTION • HINGE PIN WELDMENT • WASHER 1-9/16 • BRACE, WELDMENT, 17.50” – HOLE CENTER DISTANCE • BRACE, WELDMENT, 18.44” – HOLE CENTER DISTANCE • BRACE, WELDMENT, 19.50” – HOLE CENTER DISTANCE • BRACE, WELDMENT, 20.50” – HOLE CENTER DISTANCE • BRACE, WELDMENT, 21.06” – HOLE CENTER DISTANCE • CYLINDER, S.A. REVERSING • PIN, BRACE 1-1/8" X 6-1/2" LG • PIN, DRIVE FRAME 1-1/4" X 8-5/8" LG • HHCS, 1/2 NC X 1-1/4" LG • LOCKWASHER 1/2 • CASTLE NUT, 1-1/2" NC • COTTER PIN, 1-1/4 X 3-1/2 • HHCS, 1-1/4 NC X 6" LG GR8 • HHCS, 1-1/4 NC X 8" LG GR8 • NUT, 1-1/4 NC, ELASTIC STOP • 10' HINGE TUBE • 11' HINGE TUBE • 12' HINGE TUBE • 14' HINGE TUBE • FLAT WASHER 1-1/8" • FLAT WASHER 1-1/4" • COTTER PIN 5/16" X 2-1/2" LG • COTTER PIN 3/8" X 2-1/2" LG • GREASE FITTING 1/8 NPT • BUSHING • 10' KEEPER ANGLE • 11' KEEPER ANGLE • 12' KEEPER ANGLE • 14' KEEPER ANGLE • LOCKWASHER 5/8 • NUT, 5/8 NC HEX • BOLT, CARRIAGE, 5/8 NC X 2" LG GR8

NOTE: 1. Includes Bushing, Item 35 2. Used on polyurethane plows only HSP Rev — 5

QTY 1 1

NOTES

2 2 2 2 2 2 4 4 1 1 1 1 2 2 4 1 1 1 1 8 8 8 8 1 2 1 1 1 1 AR AR AR

2.

2. HOT WING MOLDBOARD ASSEMBLIES Figure 2. Hot Wing Moldboard Assembly

HSP Rev — 6

ITEM PART NUMBER DESCRIPTION POLYURETHANE HOT WING MOLDBOARD ASSEMBLIES 2A-12737 HOT WING MOLDBOARD ASSM, HSP4211 2W-12733 • WELD'T, HSP4211 POLY PLOW 2A-12649 HOT WING MOLDBOARD ASSM, HSP4212 2W-12454 • WELD'T, HSP4212 POLY PLOW 2A-14766 HOT WING MOLDBOARD ASSM, HSP4214 2W-14765 • WELD'T, HSP4214 POLY PLOW 2A-14732 HOT WING MOLDBOARD ASSM, HSP4811 1 2W-14731 • WELD'T, HSP4811 POLY PLOW 2A-14885 HOT WING MOLDBOARD ASSM, HSP4812 2W-14882 • WELD'T, HSP4812 POLY PLOW 2A-14096 HOT WING MOLDBOARD ASSM, HSP5611 2W-14045 • WELD'T, HSP5611 POLY PLOW 2A-14510 HOT WING MOLDBOARD ASSM, HSP5612 2W-14507 • WELD'T, HSP5612 POLY PLOW STEEL HOT WING MOLDBOARD ASSEMBLIES 1 2A-13200 HOT WING MOLDBOARD ASSM, HSS4211 2W-13143 • WELD'T, HSS4211 STEEL PLOW 2A-13217 HOT WING MOLDBOARD ASSM, HSS4212 2W-13154 • WELD'T, HSS4212 STEEL PLOW TRIP EDGE WELDMENT • WELD’T HINGE,TRIP EDGE, HSP4211, 2W-09871 HSS4211, HSP4811, HSP5611 • WELD’T HINGE,TRIP EDGE, HSP4212, 2 2W-10080 HSS4212, HSP4812 2W-13727 • WELD’T HINGE,TRIP EDGE, HSP4214 2W-14502 • WELD’T HINGE,TRIP EDGE, HSP5612 • TUBE HINGE, HSP4211, HSS4211, 2P-09876 HSP4811, HSP5611 3 • TUBE HINGE, HSP4212, HSS4212, 2P-10092 HSP4812, HSP5612 2P-13730 • TUBE HINGE, HSP4214 4 2P-09841 • KEEPER, SPRING 5 — • — 6 9C-07057 • SPRING 7 9C-07123 • HHCS, 5/8 NC X 5" LG GR8 8 9C-00265 • HHCS, 5/8-11 UNC X 2-3/4 LG 9 — • — 10 9C-00645 • NYLOCK NUT 5/8-11 UNC POLY MOLDBOARD SHEET, CENTER 11 2P-12740 • POLY MOLDBOARD SHEET, HSP4211 • POLY MOLDBOARD SHEET, HSP4212, 2P-12462 HSP4214 HSP Rev — 7

QTY 1 — 1 — 1 — 1 — 1 — 1 — 1 — 1 — 1 — 1 1 1 1 1 1 1 AR — AR AR 2 — AR 1 1

NOTES

• POLY MOLDBOARD SHEET, HSP4811 • POLY MOLDBOARD SHEET, HSP4812 • POLY MOLDBOARD SHEET, HSP5611, 2P-14097 HSP5612 LEFT HAND POLYURETHANE SHEET 2P-12738 • POLY SHEET – LH, HSP4211 2P-12648 • POLY SHEET – LH, HSP4212 2P-14771 • POLY SHEET – LH, HSP4214 12 2P-14734 • POLY SHEET – LH, HSP4811 2P-14883 • POLY SHEET – LH, HSP4812 2P-14099 • POLY SHEET – LH, HSP5611 2P-14508 • POLY SHEET – LH, HSP5612 RIGHT HAND POLYURETHANE SHEET 2P-12739 • POLY SHEET – RH, HSP4211 2P-12650 • POLY SHEET – RH, HSP4212 2P-14772 • POLY SHEET – RH, HSP4214 13 2P-14735 • POLY SHEET – RH, HSP4811 2P-14884 • POLY SHEET – RH, HSP4812 2P-14098 • POLY SHEET – RH, HSP5611 2P-14509 • POLY SHEET – RH, HSP5612 • KEEPER ANGLE, HSP4211, HSP4811, 2P-10076 HSP5611 2P-10089 14 • KEEPER ANGLE, HSP4212, HSP4812 2P-14770 • KEEPER ANGLE, HSP4214 2P-14511 • KEEPER ANGLE, HSP5612 15 9C-01198 • BOLT, CARR 5/8 NC X 2-1/2 LG GR8 16 9C-00073 • BOLT, CARR 5/8 NC X 2 LG GR8 17 9C-00096 • NUT, HEX 5/8 NC 18 9C-00139 • WASHER, LOCK 5/8" 2P-14733 2P-15057

NOTE:

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 AR AR AR AR

Items 10 through 18 are not used on Steel Moldboard Assemblies.

HSP Rev — 8

2.1 Right Hand - Flared Moldboard Assemblies Figure 3. Right Hand - Flared Moldboard Assembly

HSP Rev — 9

ITEM PART NUMBER DESCRIPTION POLYURETHANE MOLDBOARD ASSEMBLIES • RH FLARED POLY MOLDBOARD 2A-12742 ASSEMBLY, HSP4211 2W-12741 • WELDMENT - HSP4211 POLY PLOW • RH FLARED POLY MOLDBOARD 2A-12747 ASSEMBLY, HSP4212 2W-12746 • WELDMENT - HSP4212 POLY PLOW 1 • RH FLARED POLY MOLDBOARD 2A-15135 ASSEMBLY, HSP4811 2W-15136 • WELDMENT - HSP4811 POLY PLOW • RH FLARED POLY MOLDBOARD 2A-15054 ASSEMBLY, HSP4812 2W-15055 • WELDMENT - HSP4812 POLY PLOW STEEL MOLDBOARD ASSEMBLIES • RH FLARED STEEL MOLDBOARD 2A-15975 ASSEMBLY, HSS4211 2W-15974 • WELDMENT – HSS4211 STEEL PLOW • RH FLARED STEEL MOLDBOARD 2A-14790 ASSEMBLY, HSS4212 2W-14791 • WELDMENT – HSS4212 STEEL PLOW TRIP EDGE WELDMENT • WELDMENT, HINGE, TRIP EDGE, 2W-09871 HSP4211, HSP4811, HSS4211 2 • WELDMENT, HINGE, TRIP EDGE, 2W-10080 HSP4212, HSP4811, HSS4212 • TUBE, HINGE, HSP4211, HSP4811, 2P-09876 HSS4211 3 • TUBE, HINGE, HSP4212, HSP4812, 2P-10092 HSS4212 4 2P-09841 • KEEPER, SPRING 5 — • — 6 9C-07057 • SPRING 7 9C-07123 • HHCS, 5/8 NC X 5" LG FULL THD GR8 8 9C-00265 • HHCS, 5/8 NC X 2.75" LG GR8 9 — • — 10 9C-00645 • NUT, ELASTIC STOP, 5/8 NC POLYURETHANE SHEETS 2P-12745 • POLY SHEET, STRAIGHT, HSP4211 2P-12749 • POLY SHEET, STRAIGHT, HSP4212 11 2P-15137 • POLY SHEET, MAIN, HSP4811 2P-15056 • POLY SHEET, LH, HSP4812 12 2P-12739 • POLY SHEET, RH, HSP4211 2P-12650 • POLY SHEET, RH, HSP4212 HSP Rev — 10

QTY 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 AR — AR AR 2 — AR 1 1 1 1 1 1

NOTES

13 14 15 16 17

2P-14735 2P-14884 2P-10076 2P-10089 9C-01198 9C-00073 9C-00096 9C-00139 NOTE:

• • • • • • • •

POLY SHEET, RH, HSP4811 POLY SHEET, RH, HSP4812 KEEPER ANGLE, HSP4211, HSP4811 KEEPER ANGLE, HSP4212, HSP4812 BOLT, CARR, 5/8 NC X 2-1/2 LG GR8 BOLT, CARR, 5/8 NC X 2 LG GR8 NUT - HEX, 5/8 NC WASHER - LOCK, 5/8"

1 1 1 1 AR AR AR AR

Items 11 through 17 are not used on Steel Moldboard Assemblies.

HSP Rev — 11

3. RUBBER AND POLYURETHANE DEFLECTOR KITS Figure 4. Rubber and Polyurethane Deflector Kits

HSP Rev — 12

ITEM PART NUMBER DESCRIPTION RUBBER DEFLECTOR KITS 2K-09893-01 10FT RUBBER DEFLECTOR KIT 2K-09893-02 11FT RUBBER DEFLECTOR KIT 2K-12141-02 11FT RUBBER DEFLECTOR KIT 2K-09893-03 12FT RUBBER DEFLECTOR KIT 2K-09893-05 10FT RUBBER DEFLECTOR KIT 2K-09893-14 10FT RUBBER DEFLECTOR KIT 2K-09893-04 11FT RUBBER DEFLECTOR KIT 2K-09893-13 11FT RUBBER DEFLECTOR KIT 2K-09893-06 12FT RUBBER DEFLECTOR KIT 2K-09893-08 12FT RUBBER DEFLECTOR KIT 2K-09893-09 14FT RUBBER DEFLECTOR KIT POLYURETHANE DEFLECTOR KITS 2K-14638-01 10FT POLYURETHANE DEFLECTOR KIT 2K-14638-02 11FT POLYURETHANE DEFLECTOR KIT 2P-09836 • KEEPER PLATE, 10 FT 2P-09889 • KEEPER PLATE, 11FT 1 2P-10083 • KEEPER PLATE, 12FT 2P-15153 • KEEPER PLATE, 11FT 2P-13737 • KEEPER PLATE, 14FT RUBBER DEFLECTORS 2P-09838 • RUBBER DEFLECTOR, 10FT 2P-09875 • RUBBER DEFLECTOR, 11FT 2P-10084 • RUBBER DEFLECTOR, 12FT 2 2P-15436 • RUBBER DEFLECTOR, 10FT 2P-13118 • RUBBER DEFLECTOR, 12FT 2P-13738 • RUBBER DEFLECTOR, 14FT POLYURETHANE DEFLECTORS 2P-14637 • POLY DEFLECTOR, 10FT 2P-15488 • POLY DEFLECTOR, 11FT 2P-11896 • DEFLECTOR MOUNTING ANGLE, 10FT 3 2P-11857 • DEFLECTOR MOUNTING ANGLE, 11FT 2P-12289 • DEFLECTOR MOUNTING ANGLE, 12FT 2P-13739 • DEFLECTOR MOUNTING ANGLE, 14FT 4 9C-00240 • HHCS 1/2-13 UNC X 2 LG 5 9C-00643 • NYLOCK NUT 1/2-13 UNC 6 REF • PLOW ASSY NOTE:

QTY

NOTES

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 AR AR 1

Due to similarity, illustration shown is the 12’, 90 degree, Rubber Deflector Kit.

HSP Rev — 13

3.1 Hot Wing Rubber Deflectors 3.1.1 Hot Wing, Straight, Rubber Deflector Kits Figure 5. Hot Wing, Straight, Rubber Deflector Kits

HSP Rev — 14

ITEM

PART NUMBER 2K-15776

1 2 3 4 5 6

2P-15777 2P-15778 2P-15779 2P-15780 9C-00240 9C-00643

DESCRIPTION HOT WING, RUBBER DEFLECTOR KIT, STRAIGHT, HSP4211, HSP4212 • RUBBER DEFLECTOR, CENTER • RUBBER DEFLECTOR, END • RETAINING BAR, CENTER • RETAINING BAR, END • HHCS-1/2 NC X 2 GR8 • NUT, NYLOCK -1/2 NC

HSP Rev — 15

QTY 1 1 2 1 2 12 12

NOTES

3.1.2 Hot Wing, 90 Degree, Rubber Deflector Kit Figure 6. Hot Wing, 90 Degree, Rubber Deflector Kit

HSP Rev — 16

ITEM

PART NUMBER 2K-12625 2K-14782 2K-14180 2K-12895 2K-12900

1 2 3

2P-12827 2P-12896 2P-12898 2P-12828 2P-14783 2P-12829 2P-12830 2P-14184

4 2P-12905 2P-12906 2P-12831 5

2P-14784 2P-14185 2P-12870 2P-14785 2P-14186

6

2P-14187 2P-12897 2P-12899

7 8

9C-00240 9C-00643

DESCRIPTION HOT WING, RUBBER DEFLECTOR KIT, 90° HSP4211, HSP4212 HOT WING, RUBBER DEFLECTOR KIT, 90° HSP4214 HOT WING, RUBBER DEFLECTOR KIT, 90° HSP5611, HSP5212 RH FLARED, RUBBER DEFLECTOR KIT, 11FT RH FLARED, RUBBER DEFLECTOR KIT, 12FT • CENTER ANGLE • CENTER ANGLE, RH FLARED, 11FT • CENTER ANGLE, RH FLARED, 12FT • END ANGLE, LH, HSP4211, HSP4212 • END ANGLE, LH, HSP4214 • END ANGLE, RH • RETAINING BAR, CENTER, HSP4211, HSP4212, HSP4214 • RETAINING BAR, CENTER, HSP5611, HSP5612 • RETAINING BAR, CENTER, RH FLARED11FT • RETAINING BAR, CENTER, RH FLARED12FT • RETAINING BAR, END, HSP4211, HSP4212, RH FLARED 11FT, 12FT • RETAINING BAR, END, HSP4214 • RETAINING BAR, END, HSP5611, HSP5612 • RUBBER DEFLECTOR, HSP4211, HSP4212 • RUBBER DEFLECTOR, HSP4214 • RUBBER DEFLECTOR, HSP5611, HSP5612 • RUBBER DEFLECTOR END, HSP5611, HSP5612 • RUBBER DEFLECTOR, RH FLARED, 11FT • RUBBER DEFLECTOR, RH FLARED, 12FT • HHCS-1/2 NC X 2 GR8 • NUT, NYLOCK -1/2 NC

NOTE: 1. Not used with HSP5611 and HSP5612 HSP Rev — 17

QTY

NOTES

1 1 1

1 1 1 1 2 1 1 1 1 1 2 1 1 1 1 1 2 1 1 AR AR

1.

2. 3.

2. Not used with HSP5611 and HSP5612 3. Not used with HSP4214, HSP5611 and HSP5612

HSP Rev — 18

4. AIRFOIL (OPTIONAL EQUIPMENT) Figure 7. Airfoil (Optional Equipment)

ITEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20

PART NUMBER 2K-15581 2P-15577 2P-15578 2P-15579 2P-15580 2P-16016 9C-00240 9C-00643 9C-00212 9C-00641 2P-16017 2P-16018 2P-16019 2P-15578-01 2P-15582 4P-00953-030 4P-00953-031 4P-00953-032 4P-00953-033 2P-16367 2P-16368

DESCRIPTION AIRFOIL MOUNTING KIT • AIRFOIL, 11' • RIB • MOUNTING ANGLE • RETAINING STRAP • RETAINING STRAP • HHCS - 1/2NC X 2" LG. • NUT - ELASTIC STOP, 1/2NC • HHCS - 3/8NC X 2" LG. • NUT - ELASTIC STOP, 3/8NC • RETAINING STRAP • MOUNTING ANGLE • MOUNTING ANGLE • RIB, INNER • MOUNTING BAR • ANGLE, 4 X 4 X 3/8 X 33-7/16 LG • ANGLE, 4 X 4 X 3/8 X 21-7/16 LG • ANGLE, 4 X 4 X 3/8 X 17-15/16 LG • ANGLE, 4 X 4 X 3/8 X 2-3/16 LG • GUSSET, FRONT • GUSSET, BACK HSP Rev — 19

QTY 1 1 2 1 2 2 18 18 36 36 1 1 2 4 1 1 2 2 4 2 2

NOTES

5. CASTER WHEEL ASSEMBLIES 5.1 Caster Wheel Assembly Figure 8. Caster Wheel Assembly

HSP Rev — 20

ITEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

PART NUMBER 2A-00674 2A-00686 2A-00268 2W-00254 2W-00257 2W-00673 2P-00266 2P-03337-002 2P-00382 2P-00677 2P-00679 2P-00680 9C-00671 9C-01086 9C-00520 9C-01375

DESCRIPTION CASTER WHEEL ASSEMBLY • RUBBER WHEEL ASSEMBLY • ADJUSTING SCREW ASSEMBLY • OUTER TUBE WELDMENT • SCREW LOCK NUT WELDMENT • INNER TUBE WELDMENT • THRUST BEARING • STOP • SPACER TUBING • SPACER • SPACER • SPACER • ELASTIC STOP NUT 1” NF • ALEMITE FITTING 1/8” STRAIGHT • HHCS 1” NF X 8 • RAW STOCK PIN

HSP Rev — 21

QTY 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

NOTES

5.2 8” Caster Wheel Assembly Figure 9. 8” Caster Wheel Assembly

HSP Rev — 22

ITEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18

PART NUMBER 2A-00267 2A-00236 2A-00268-002 2P-00259 2P-00261 2P-00265 2P-00266 2W-00254 2W-00257 2W-00263 9C-00117 9C-00139 9C-00294 9C-00451 9C-00562 9C-00647 9C-01085 9C-01086 9C-01167

DESCRIPTION 8” CASTER WHEEL ASSEMBLY • 8" CASTER WHEEL ASS'Y • ADJUSTING SCREW • SPRING • SCREW HANDLE • SPACER • THRUST BEARING • OUTER TUBE-WELD'T • LOCK NUT-WELD'T • INNER TUBE-WELD'T • HEX NUT 5/8NF • LOCK WASHER 5/8 • HHCS-3/4 NC X 5-1/2 LG GR8 • HHCS-5/8 NF X 2-1/4 LG GR8 • PIN COTTER 1/8 X 1-1/2 LG • NUT ELASTIC STOP 3/4 NC • GREASE FITTING 1/4-28 ALEMITE • GREASE FITTING 1/8 NPT ALEMITE • PIN-ROLL 5/16 X 2 LG

HSP Rev — 23

QTY 2 1 1 1 1 1 1 1 1 1 4 4 1 4 1 1 1 1 1

NOTES

5.3 8” Caster Wheel Assembly, Adjustable Figure 10. 8” Caster Wheel Assembly, Adjustable

HSP Rev — 24

ITEM 1 2 3 4 5 6 7 8 9

PART NUMBER 2A-00267 2A-00236 2W-00229 9C-00117 9C-00139 9C-00294 9C-00451 9C-00647 9C-01085 9C-01086

DESCRIPTION 8” CASTER WHEEL ASSEMBLY • 8" CASTER WHEEL ASS'Y • TUBE WELD'T • HEX NUT 5/8 NF • LOCK WASHER 5/8 • HHCS-3/4 NC X 5-1/2 LG GR8 • HHCS-5/8 NF X 2-1/4 LG GR8 • NUT ELASTIC STOP 3/4 NC • GREASE FITTING 1/4-28 ALEMITE • GREASE FITTING 1/8 NPT ALEMITE

HSP Rev — 25

QTY 2 1 1 4 4 1 4 1 1 1

NOTES

5.4 10” Caster Wheel Assembly, Adjustable Figure 11. 10” Caster Wheel Assembly, Adjustable

HSP Rev — 26

ITEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19

PART NUMBER 2A-03086-001 2A-03080 2A-00268-002 2P-00259 2P-00261 2P-00265 2P-00266 2W-00254 2W-00257 2W-03082 9C-00117 9C-00139 2P-03085 9C-00451 9C-00562 9C-00757 9C-01085 9C-01086 9C-01167 9C-00571

DESCRIPTION 10” CASTER WHEEL ASSEMBLY • 10" CASTER WHEEL & BEARING ASSM • ADJUSTING SCREW • SPRING • SCREW HANDLE • SPACER • THRUST BEARING • OUTER TUBE-WELD'T • LOCK NUT-WELD'T • INNER TUBE-WELD'T • HEX NUT 5/8 NF • LOCK WASHER 5/8 • SHAFT • HHCS-5/8 NF X 2-1/4 LG GR8 • PIN COTTER 1/8 X 1-1/2 LG • NUT-HEX CASTLE 1-1/4 NF • GREASE FITTING 1/4-28 ALEMITE • GREASE FITTING 1/8 NPT ALEMITE • PIN-ROLL 5/16 X 2 LG • PIN-COTTER 3/16 X 2-1/2

HSP Rev — 27

QTY 2 1 1 1 1 1 1 1 1 1 4 4 1 4 1 1 1 1 1

NOTES

5.5 8” Caster and Shoe Mounting Kit (15 or 19” Pin Height) Figure 12. 8” Caster and Shoe Mounting Kit (15 or 19” Pin Height)

HSP Rev — 28

ITEM

PART NUMBER 2W-09957 2W-09957-01

1 2 3 4

REF 2W-09865 2W-09885 2W-09886

5

REF

6 7 8

2W-10200 2P-09956 8P-00584-010

DESCRIPTION MOUNTING KIT SHOES AND WHEELS (19” PIN HEIGHT) MOUNTING KIT SHOES AND WHEELS (15” PIN HEIGHT) • WELD'T-MOLDBOARD • WELD'T-TRUSS FRAME • WELD'T-A-FRAME, OSCILLATING • WELD'T-OSCILLATING BEAM • BOLT ADJ. MUSHROOM SHOE OR WHEEL • ARM • PLATE-ADJUSTING MUSHROOM SHOE • 3/8" ROUND

NOTE: 1. Refer to specific purchase order for equipment options.

HSP Rev — 29

QTY

NOTES

1 1 REF REF REF REF

1.

REF

1.

REF 2 2

1.

5.6 8” Caster and Shoe Mounting Kit (8” Top Punched C.E., 15 or 19” Pin Height) Figure 13. 8” Caster and Shoe Mounting Kit (8” Top Punched, 15 or 19” Pin Height)

HSP Rev — 30

ITEM

PART NUMBER 2K-15274

1 2 3 4

REF 2W-15275-01 2W-15275-02 REF

DESCRIPTION MOUNTING KIT SHOES AND WHEELS (8” TOP PUNCHED C.E., 15 OR 19” PIN HEIGHT) • 8" CASTER WHEEL ASSEMBLY • MOUNTING WELDMENT, LH • MOUNTING WELDMENT, RH • HOMESAFE PLOW

NOTE: 1. Refer to specific purchase order for equipment options.

HSP Rev — 31

QTY

NOTES

1 REF 1 1 REF

1.

1.

5.7 Snow Wheel Kit Figure 14. Snow Wheel Mounting Kit

HSP Rev — 32

ITEM 1 2 3 4 5 6 7 8 9

PART NUMBER 2K-13212 9C-06625 2P-13214-01 2P-13214-02 2P-13213 9C-00262 9C-00096 9C-00139 2P-15673 —

DESCRIPTION SNOW WHEELS MOUNTING KIT • SNOW WHEELS #6509 • MOUNTING PLATE, LH • MOUNTING PLATE, RH • GUSSET • HHCS-5/8 NC X 2 LG, GR8 • NUT, HEX-5/8 NC • LOCKWASHER-5/8 • GUSSET • HOMESAFE PLOW

NOTE: 1. Refer to specific purchase order for equipment options.

HSP Rev — 33

QTY 1 2 1 1 2 8 8 8 2 REF

NOTES

1.

6. MUSHROOM SHOE ASSEMBLIES 6.1 Mushroom Shoe Assembly, Bolt Adjustment Figure 15. Mushroom Shoe Assembly, Bolt Adjustment

HSP Rev — 34

ITEM 1 2 3 4 5 6 7

PART NUMBER 2A-00222 2P-00227 2W-00223 9C-01188 9C-00139 9C-00096 9C-00451 9C-00117

DESCRIPTION MUSHROOM SHOE ASSEMBLY, BOLT ADJ • MUSHROOM SHOE • TUBE WELD'T • PLOW BOLT 5/8 NC X 2 • LOCK WASHER 5/8 • NUT, HEX 5/8 NC • HHCS-5/8 NF X 2-1/4 LG GR8 • HEX NUT 5/8 NF

HSP Rev — 35

QTY 2 1 1 2 6 2 4 4

NOTES

6.2 Mushroom Shoe Assembly, Screw Adjustment Figure 16. Mushroom Shoe Assembly, Screw Adjustment

HSP Rev — 36

ITEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20

PART NUMBER 2A-00244 2P-00227 2A-00251 2P-00259 2P-00261 2P-00260 2P-00262 2W-00254 2W-00257 2W-00250 9C-00117 9C-00139 9C-01188 9C-00451 9C-00562 2P-01824 9C-01085 9C-00576 9C-01167 2W-00245 9C-00096

DESCRIPTION MUSHROOM SHOE ASSEMBLY, BOLT ADJ • MUSHROOM SHOE • ADJUSTING SCREW • SPRING • SCREW HANDLE • SPACER • PIVOT PIN • OUTER TUBE-WELD'T • LOCK NUT-WELD'T • INNER TUBE-WELD'T • HEX NUT 5/8 NF • LOCK WASHER 5/8 • PLOW BOLT 5/8 NC X 2 • HHCS-5/8 NF X 2-1/4 LG GR8 • PIN COTTER 1/8 X 1-1/2 LG • PIN 1 X 6 • GREASE FITTING 1/4-28 ALEMITE • PIN, COTTER 1/4 X 2 LG • PIN-ROLL 5/16 X 2 LG • PIVOT CONNECTOR • NUT, HEX 5/8 NC

HSP Rev — 37

QTY 2 1 1 1 1 1 1 1 1 1 4 6 2 4 1 1 1 1 1 1 2

NOTES

7. MOLDBOARD WEAR SHOE KITS Figure 17. Moldboard Wear Shoe Kit

HSP Rev — 38

ITEM

DESCRIPTION MOLDBOARD WEAR SHOE KIT • MOLDBOARD SHOE WELDMENT • CARRAGE BOLT, 5/8 NC X 3 • NUT, ELASTIC STOP 5/8 NC

QTY 1 2 4 4

NOTES 1.

1 2 3

PART NUMBER 2K-10026-01 2W-10025-01 9C-00076 9C-00645 2K-10026-02 2W-10025-01 9C-00076 9C-00645

MOLDBOARD WEAR SHOE KIT • MOLDBOARD SHOE WELDMENT • CARRAGE BOLT, 5/8 NC X 3 • NUT, ELASTIC STOP 5/8 NC

1 2 4 4

2.

1 2 3

2K-10026-03 2W-10025-01 9C-00076 9C-00645 2P-14575

MOLDBOARD WEAR SHOE KIT • MOLDBOARD SHOE WELDMENT • CARRAGE BOLT, 5/8 NC X 3 • NUT, ELASTIC STOP 5/8 NC • PAD, WEAR SHOE

1 2 4 4 2

3.

1 2 3 4

2K-10026-04 2W-10025-02 9C-00077 9C-00645

MOLDBOARD WEAR SHOE KIT • MOLDBOARD SHOE WELDMENT • CARRAGE BOLT, 5/8 NC X 3-1/2 • NUT, ELASTIC STOP 5/8 NC

1 2 4 4

4.

1 2 3

MOLDBOARD WEAR SHOE KIT • MOLDBOARD SHOE WELDMENT • CARRAGE BOLT, 5/8 NC X 3 • NUT, ELASTIC STOP 5/8 NC

1 2 4 4

5.

1 2 3

2K-10026-05 2W-10025-03 9C-00076 9C-00645 2K-10026-06 2W-10025-04 9C-00076 9C-00645

MOLDBOARD WEAR SHOE KIT • MOLDBOARD SHOE WELDMENT • CARRAGE BOLT, 5/8 NC X 3 • NUT, ELASTIC STOP 5/8 NC

1 2 4 4

6.

1 2 3

NOTE: 1. For use on Homesafe moldboards with an eight inch center punched cutting edge, 15 degree attack angle, and a pin height of 15”. 2. For use on Homesafe moldboards with an eight inch center punched cutting edge, 4 degree attack angle, and a pin height of 19”. 3. For use on Homesafe moldboards with an eight inch top punched cutting edge, 15 degree attack angle, and a pin height of 15”. 4. For use on Homesafe moldboards with a six inch punched (carbide) cutting edge, 10 degree attack angle, and a pin height of 15”. 5. For use on Homesafe moldboards with a Schmidt Quick Hitch. 6. For use on Homesafe moldboards with a carbide cutting edge and Schmidt Quick Hitch.

HSP Rev — 39

8. LIFT LINK ASSEMBLY Figure 18. Lift Link Assembly

ITEM 1 2 3 4 5

PART NUMBER 4A-06765 4W-06764 9C-08376 2P-00712 9C-00576 P-24004

DESCRIPTION LIFT LINK ASSEMBLY • LIFT LINK-WELDMENT • 2" SAFETY PIN WEB SHACKLE • PIN 1 X 4 • PIN-COTTER 1/4 X 2 • GRAB LINK - 1/2" CHAIN

HSP Rev — 40

QTY 2 1 1 1 1 2

NOTES

8.1 Lift Chain Weldment Figure 19. Lift Chain Weldment

ITEM 1 2 3

PART NUMBER 2W-12330 9C-06790-048 9C-03232 9C-00007

DESCRIPTION LIFT CHAIN WELDMENT • CHAIN-1/2 X 48" LG • SHACKLE-5/8 • LINK-REPAIR, 1/2

HSP Rev — 41

QTY 2 1 1 1

NOTES

8.2 Level Lift Kit, Two Chain Figure 20. Level Lift Kit, 2-Chain

HSP Rev — 42

ITEM 1 2 3 4 5 6 7

PART NUMBER 4K-06172 REF 9C-08376 P-24004 2W-12330 — 4K-06173 REF

DESCRIPTION LEVEL LIFT KIT, 2-CHAIN • 225C HITCH • 2" SAFTEY PIN WEB SHACKLE • GRAB LINK • LIFT CHAIN WELDMENT • — • MOD. KIT FOR CHAIN LEVEL LIFT • HOME SAFE PLOW

NOTE: 1. See Figure 19 on Page 41 for parts breakdown.

HSP Rev — 43

QTY 1 REF 1 2 2 — REF REF

NOTES

1.

8.3 Level Lift Kit, Pulley Block Style Figure 21. Level Lift Kit, Pulley Block Style

ITEM 1 2 3 4 5 6 7 8 9 10

PART NUMBER 2K-04732 4W-02125 9C-01370-168 9C-01407 9C-01282 9C-01276 9C-00007 9C-02052 9C-00096 9C-00139 2W-05732-002

DESCRIPTION LEVEL LIFT KIT, PULLEY BLOCK STYLE • LEVEL LIFT WELD'T • CABLE-1/2 X 14'-0" • SHACKLE-1/2" • CABLE THIMBLE-1/2 • CLIP,CABLE-1/2 • LINK, REPAIR-1/2 X 2-1/2 • HHCS-5/8 NC X 2-1/2 LG GR.8 • NUT, HEX-5/8 NC • WASHER, LOCK-5/8 • REVERSE FRAME-HYDRAULIC HSP Rev — 44

QTY 1 1 1 2 2 4 2 1 1 1 REF

NOTES

8.4 Tension Spring, Lift Chain Assembly (Optional Equipment) Figure 22. Tension Spring, Lift Chain Assembly (Optional Equipment)

1 2 3 4 5

ITEM PART NUMBER 2A-14830 2P-14871 2P-12595 9C-00007 9C-03232 9C-06790-038

DESCRIPTION TENSION SPRING ASSEMBLY • SPRING • LONG BAR • REPAIR LINK • SHACKLE, 5/8" • CHAIN-1/2 X 38" LG

HSP Rev — 45

QTY 1 1 2 1 1 1

NOTES

9. CURB GUARD KIT (OPTIONAL EQUIPMENT) Figure 23. Curb Guard Kit

ITEM 1 2 3 4

PART NUMBER 2K-12324 2W-12323 9C-00077 9C-00096 9C-00139

DESCRIPTION CURB GUARD KIT • CURB GUARD-WELDMENT • CARRIAGE BOLT-5/8 NC X 3-1/2 LG • HEX NUT-5/8 NC • LOCK WASHER-5/8 HSP Rev — 46

QTY 1 2 6 6 6

NOTES

9.1 Parking Stands Figure 24. Parking Stand w/Mounting Brackets

HSP Rev — 47

ITEM 1 2 3 4 5 6

PART NUMBER 2K-12620 2P-02788-010 2P-11585 2W-11587 2W-11587-01 2P-15213 S2767.9136 2W-09885

DESCRIPTION PARKING STAND • FLAT-1/2 X 3 X 6.25 LG • TUBE SQUARE-LEG SUPPORT • SQ. SUPPORT LEG-WELDED • SQ. SUPPORT LEG-WELDED • PIN, PARKING STAND • HINGED PIN • A FRAME, OSCILLATING

NOTE: 1. Optional longer leg.

HSP Rev — 48

QTY 2 1 1 1 1 1 1 REF

NOTES

1.

Figure 25. Parking Stand w/Mounting Brackets (A-Frame)

HSP Rev — 49

ITEM 1 2 3 4

PART NUMBER 2K-14396 2W-11587 2P-15213 S2767.9136 2P-11585

DESCRIPTION PARKING STAND • SQ. SUPPORT LEG-WELDED • PIN, PARKING STAND • HINGED PIN • TUBE SQUARE-LEG SUPPORT

NOTE: 1. For use with standard A-frame.

HSP Rev — 50

QTY 2 1 1 1 1

NOTES 1.

10. CYLINDERS 10.1 Reversing Cylinder, Single Acting, Nitride (Optional Equipment) Figure 26. Reversing Cylinder, Single Acting, Nitride (Optional Equipment)

HSP Rev — 51

ITEM 1 2 3 4 5 6 7 8

PART NUMBER 9C-08037 30350 — — — 18340 1K-00847-043 9C-07712 12300

DESCRIPTION REVERSING CYLINDER, SINGLE ACTING • WEAR RING • — • — • — • O RING • POLYPAK (21302) • GLAND NUT (13681) • ROD WIPER

QTY 2 1 — — — 1 1 1 1

NOTES

QTY 2 1 — 1 1 1 1 1 1

NOTES

10.2 Standard Cylinder Parts List ITEM 1 2 3 4 5 6 7 8

PART NUMBER 9C-07108 30350 — — — 18340 21302 13681 12300

DESCRIPTION STANDARD CYLINDER • WEAR RING • PISTON (STEEL) • JACKET ASSEMBLY • PISTON ROD • O RING • POLYPAK, TYPE B • GLAND NUT • ROD WIPER

HSP Rev — 52

10.3 Reversing Cylinder, Double Acting, Nitride (Optional Equipment) Figure 27. Reversing Cylinder, Double Acting, Nitride (Optional Equipment)

HSP Rev — 53

ITEM 1 2 3 4 5 6 7 8 9 10 11

PART NUMBER 9C-07061 30360 — 21313 39938 — — — 18340 21302 13681 12300

DESCRIPTION REVERSING CYLINDER, DOUBLE ACTING • WEAR RING • PISTON (STEEL) • POLYPAK (21302) • TEFLON BACKUP • STOP TUBE • JACKET ASSEMBLY • PISTON ROD • O RING • POLYPAK (TYPE B) • GLAND NUT • ROD WIPER

HSP Rev — 54

QTY 2 1 — 1 1 1 1 1 1

NOTES

11. HYDRAULIC LINE KITS 11.1 Hydraulic Line Kit with DA Cylinders and Cushion Valve Figure 28. Hydraulic Line Kit with DA Cylinders and Cushion Valve

HSP Rev — 55

11.1.1 Hydraulic Line Kit with DA Cylinders and Cushion Valve Parts List ITEM

PART NUMBER 1K-01644-08

1 2 3 4 5 6 7 8 9 10 11 12

9C-02690-08 9C-02691-09 9C-02706-04 9C-02714-04 9C-03325-07 9C-03325-08 9C-03483 9C-07061 9C-01888-012 9C-03448 9C-00091 9C-00134

DESCRIPTION HYDRAULIC LINE KIT W/DA CYLINDERS AND CUSHION VALVE • ADAPTOR 1/2 X 90° • ADAPTOR 1/2 M.P. • ELBOW 45° STR 1/2 P. • TEE 1/2 P. STREET • HOSE END 1/2 M.P. 3/8 P. RIGID • HOSE END M.P. • HOSE 1/2 100R2 H.P. • CYL. D.A. 3-1/2 X 16-1/8 STR. • CUSHION VALVE DXV-50-2000 • HHCS 5/16 NC X 2-3/4 LG • NUT, HEX 5/16 NC • LOCKWASHER, 5/16

HSP Rev — 56

QTY 1 2 2 2 2 2 10 19FT 2 1 2 2 2

NOTES

11.1.2 Hydraulic Line Kit with DA Cylinders Parts List ITEM 1 2 3 4 5 6 7 8 9 10 11 12

PART NUMBER 1K-01644-06 9C-02690-08 9C-02691-09 9C-02706-04 9C-02714-04 9C-03325-07 9C-03325-08 9C-03483 9C-07061 1W-00154 — — —

DESCRIPTION HYDRAULIC LINE KIT W/DA CYLINDERS • ADAPTOR 1/2 X 90° • ADAPTOR 1/2 M.P. • ELBOW 45° STR 1/2 P. • TEE 1/2 P. STREET • HOSE END 1/2 M.P. 3/8 P. RIGID • HOSE END M.P. • HOSE 1/2 100R2 H.P. • CYL. D.A. 3-1/2 X 16-1/8 STR. • BRACKET-QUICK COUPLER BULKHEAD • — • — • —

QTY 1 2 2 2 2 2 10 19FT 2 1 — — —

NOTES 1.

2.

NOTE: 1. Due to similarity, illustration shown is the Hydraulic Line Kit with DA Cylinders and Cushion Valve. 2. Not Illustrated

HSP Rev — 57

11.1.3 Hydraulic Line Kit with Cushion Valve Mounting Parts List ITEM

PART NUMBER 1K-01644-02

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

9C-02690-08 9C-02691-09 9C-02710-05 9C-02714-04 9C-03325-07 9C-03325-08 9C-03483 9C-07061 9C-07109 9C-07110 9C-05681 9C-07125 9C-00144 9C-00209 115307A

DESCRIPTION HYDRAULIC LINE KIT W/CUSHION VALVE MOUNTING • ADAPTOR 1/2 X 90° • ADAPTOR 1/2 M.P. • ELBOW, 90 STR, 1/2 P • TEE 1/2 P. STREET • HOSE END 1/2 M.P. 3/8 P. RIGID • HOSE END M.P. • HOSE 1/2 100R2 H.P. • CYL. D.A. 3-1/2 X 16-1/8 STR. • COUPLER, Q. COUPLER, 3/8 • NIPPLE, Q. COUPLER, 3/8 • CLAMP, HOSE • SPRING, HOSE SUPPORT • LOCKWASHER, 1" • CAPSCREW, 3/8 X 1-1/4 HEX HD • FLANGE NUT, 3/8 TOP LOCK

QTY

NOTES

1

1.

2 2 2 2 2 10 15FT 2 1 1 2 1 REF 1 1

2. 2. 2. 2. 2. 2. 2.

NOTE: 1. Due to similarity, illustration shown is the Hydraulic Line Kit with DA Cylinders and Cushion Valve. 2. Not Illustrated

HSP Rev — 58

11.1.4 Hydraulic Line Kit with Flow Restrictors Figure 29. Hydraulic Line Kit with Flow Restrictors

HSP Rev — 59

ITEM 1 2 3

PART NUMBER 1K-01644-05 9C-00091 9C-00134 9C-01888-012

4

9C-02691-09

5

9C-03325-08

6 7 8 9 10 11 12

9C-03448 9C-03483 9C-07600 9C-07108 9C-02704-08 — —

DESCRIPTION HYDRAULIC LINE KIT • NUT, HEX 5/16-18 UNC • LOCKWASHER 5/16 NOM • CUSHION VALVE DXV-50-2000 • ADAPTER, 1/2 NPT MALE X 1/2 NPT FEMALE SWIVEL • HOSE END 1/2 HOSE NIPPLE X 1/2 NPT MALE RIGID • HHCS 5/16-18UNC X 2-3/4 LG GR8 • HOSE 1/2" 100R2 • FLOW RESTRICTOR 1/2 NPT FEMALE • CYLINDER, SINGLE ACTING • NIPPLE 1/2 NPT • — • —

NOTE: 1. See Parts List, Section 10.2, on Page 52 for parts breakdown.

HSP Rev — 60

QTY 1 2 2 1

NOTES

4 8 2 15FT 2 2 2 — —

1.