Norton PGS 348-354
1/17/03
Norton
9:52 AM
Page 1
®
N O R T O N® D O O R C L O S E R S
Series 1600 and Series 1601 & 1601BF 1600-Series Sized 3,4,5 1601 are adjustable sizes 3-6. 1601BF adjustable 1-4
Options ■ Adjustable Delayed Action: Available in place of backcheck. Adds a third closing speed range at the beginning of the door’s closing cycle. ■ Hold-Open Arm: Closer arm has adjustable hold-open feature (90° to 180°).This arm is non-handed. Order by suffixing “H” to the Catalog Number. ■ Back-Check (1601)
Installation for Series 1600 & 1601 Regular Arm The Series 1600 and Series 1601 door closers have been tested and certified by an independent testing laboratory as being in compliance with the Grade 1 requirements of ANSI Standard A156.4. HINGE OR PIVOT
Features of 1600, 1601 & 1601BF ■ Tri-Style Installation: Versatile closer packaged for regular arm, top jamb or parallel arm installation. ■ Non-Handed: Installed on either right or left hand doors for all applications. ■ Aluminum Alloy Shell: Norton closer shells are constructed of a special aluminum alloy which is lightweight and offers proven durability. ■ Rack & Pinion Operation: Provides a smooth transmission of power, for control of the door through its full opening and closing cycle. ■ Adjustable Sweep Speed: An independent regulating valve, hex-key-operated, permits adjustment of the general closing speed. ■ Adjustable Latch Speed: An independent regulating valve, hex-key-operated, permits adjustment of the door’s speed for approximately the last 10° of the closing cycle. ■ Non-Hold-Open Arm: Standard closer will be supplied with a Non-Hold-Open Arm.This arm is non-handed. ■ Adjustable Backcheck Cushioning (1600 only): An independent regulating valve, hex-key-operated, provides an adjustable hydraulic cushion to the door opening speed toward the end of the cycle. ■ 1601 door closers: Adjustable sizes 3-6. ■ 1601BF door closers: Designed to comply with requirements of the Americans With Disabilities Act (A.D.A.) and ANSI Standard A117.1. Adjustable, sizes 1-4.
2-1/4"
6-5/8"
TEMPLATE POSITION FOR 100O DOOR OPENING
*1603BC Length 8-3/4"
Finish ■ SB (689) Aluminum Sprayed, 313 (695) Dark Amber Sprayed, BL (691) Light Bronze Sprayed, 315 (693) Black Sprayed, GB (696) Satin Brass Sprayed, STAT (690) Dark Bronze Sprayed.
348
Toll Free: (800) 221-2052 http://www.mfsales.com
■ ■
9-3/4"*
Phone: (718) 622-8785 ■ Fax: (718) 789-8346 e-mail:
[email protected]
1-1/2"
2-5/8"
3-1/2"
2-7/8"
Norton PGS 348-354
1/17/03
9:52 AM
Page 2
Norton
NORTON DOOR CLOSERS ®
Installation for Series 1600 & 1601 (continued)
®
Accessories HINGE OR PIVOT
#1647 Corner Bracket For use where it is desired to mount the closer regular arm, on the opposite to hinge side of the door. Can also be used to clear an overhead door holder.
Top Jamb 9-3/4"*
7-1/8"
HINGE OR PIVOT
1-3/4"
5/8" REF
TEMPLATE POSITION FOR 100O DOOR OPENING
2-7/8"
2-5/8"
2-5/8"
REVEAL
1-7/8"
5/8"
6-7/16"
7-7/16"
10-15/16"
#1687 Drop Plate 9-3/4" Low Ceiling Clearance Overhead Door Holder 2-9/16" For use where low ceiling clearance prevents normal top jamb mounting.This plate is used when the clearance is between 1-3/4" and 2-5/8". Or for use where an overhead door holder prevents normal top jamb mounting.This places the centerline of the arm mounting screws at 2-1/4" from the top of the door. #1688 Drop Plate Overhead Door Holder For use where an overhead door holder prevents normal top jamb mounting.This places the centerline of the arm mounting screws at 2-7/8".
Parallel Arm HINGE OR PIVOT
5-3/8"
REF
5"
7-1/4"
9-3/4"* 3-3/8"
6" 2-5/8"
#1618A Parallel Arm Bracket This soffit plate is supplied standard with most non-hold-open closers, to permit parallel arm mounting. It can be mounted where the frame soffit is as narrow as 1".
9-3/4"
3-1/4"
4-7/8"
1-1/2"
3-1/2"
#1628H Parallel Arm Bracket 3-1/2" for Hold-Open Arms This adapter plate is supplied standard with most hold-open closers. It 4-9/16" can also be used to convert regular arm or top jamb hold-open to parallel arm installation. It can be mounted where the frame soffit is as narrow as 1".
1-9/16"
2-7/8"
*1603BC Length 8-3/4"
#SN134 Sex Nuts Package of four.
349
Norton PGS 348-354
1/17/03
Norton
9:52 AM
Page 3
®
N O R T O N® D O O R C L O S E R S
Series 7500 & 7500BF Door Closers Introduction Series 7500 are Normal Power Range Closers and are adjustable in a 2 thru 6 size range.These closers can be installed and adjusted to conform to the closing power requirements of conventionally sized closers.
o Series 7500BF are Accessibility Code Closers and are adjustable
■
■
■
■
in a 1 thru 4 size range.These closers are lighter-powered than the Series 7500 to reduce the door opening resistance to manageable levels for the handicapped and still provide door control. ■
The Series 7500/7500BF closers have a complete range of separate control adjustments: sweep speed, latch speed, backcheck cushioning and backcheck positioning.Adjustable delayed action closing is also available as an option. Applications Series 7500 closers are narrow projection door controls: projection is just 2-1/8" from the surface of the door or jamb.They are complete with covers finished to suit the décor of other hardware. They are available with sprayed covers or BHMA plated finishes. U.L. Listing All Norton Series 7500/7500BF Closers with non-hold-open arms are listed by Underwriters’ Laboratories, Inc. for use on labeled fire doors (UL10C). ANSI/BHMA/Federal Specs The Series 7500 door closer has been tested and is certified by an independent testing laboratory as being in compliance with the Grade 1 requirements of ANSI Standard A156.4. Features Multi-Size Power:The closer spring assembly can be adjusted through a wide power range. A high shouldered adjustment nut accepts a standard 11/16" socket or wrench. ■ Two Power Ranges: Each series can be adjusted through a range of sizes: Series 7500 Normal Power Range Closer, sizes 2 thru 6; Series 7500BF A.D.A. Accessibility Code Closer, sizes 1 thru 4. ■ Tri-Style Installation: Versatile closer packaged with mounting hardware for regular arm and parallel arm installation. Closer can also be installed top jamb where frame face and reveal permit.Top jamb installation requires a minimum frame face of 3-1/4"; arm will accommodate frame reveals of 0-3". ■
350
Toll Free: (800) 221-2052 http://www.mfsales.com
■ ■
■
Non-Handed: Pinion shaft extends vertically through the closer body in both directions.This permits the closer to be positioned on either right or left hand doors for all applications. Some options, will require that the hand of the closer be specified. Adjustable Sweep Speed: An independent regulating valve, hex-key-operated, permits adjustment of general closing speed. Adjustable Latch Speed: An independent regulating valve, hex-key-operated, permits adjustment of the door’s speed for approximately the last 5° of the closing cycle. Adjustable Backcheck Cushioning: An independent regulating valve, hex-key-operated, provides an adjustable hydraulic cushion to the door opening speed toward the end of the opening cycle. Adjustable Backcheck Positioning: An independent valve, hex-key-operated, allows adjustment of the point, in the door’s opening cycle, at which backcheck cushioning takes effect. It provides a range of 20° within which backcheck can be set.The exact range is dependent upon the arm application and templated position of the closer. Molded cover: Supplied as standard for all closers, this cover is fabricated of high impact U.L. listed material for covering the closer body and mounting screws.This cover is non-handed and has cutout sections for top jamb application.
Finish ■ SB (689) Aluminum Sprayed, 313 (695) Dark Amber Sprayed, BL (691) Light Bronze Sprayed, 315 (693) Black Sprayed, GB (696) Satin Brass Sprayed, STAT (690) Dark Bronze Sprayed. Options Delayed Action:An optional hydraulic feature that adds a third speed range to the closing control cycle.This feature becomes effective when the door is opened and released at any point beyond 70°.This delayed closing enables traffic to clear the opening before the normal closing cycle starts.This feature is advantageous to the handicapped and elderly. It is also valuable for wheeled or other traffic where delayed closing is desirable. Backcheck cushioning and backcheck positioning are standard with all closers including closers with Adjustable Delayed Action Closing. Order Series 7500DA. ■ Hold Open: Closer has adjustable hold-open feature (90-180 degrees) and is non-handed. Order by suffixing H to model. ■
Phone: (718) 622-8785 ■ Fax: (718) 789-8346 e-mail:
[email protected]
Norton PGS 348-354
1/17/03
9:52 AM
Page 4
Norton
NORTON DOOR CLOSERS ®
®
Installation for Series 7500 & 7500BF Regular Arm HINGE
1-3/4" 2-1/8" HO
3-1/2" 4-1/8"
3-7/8" 7" 13-5/8"
2-1/8"
Top Jam 2-1/8"
7"* 13-5/8"
3-1/4"
3-7/8"
5/8" (16)
REVEAL
3-7/8"
REF
2" 2-1/2" HO
*7" 100O DOOR OPENING. 3-1/8 ALL OPENINGS HINGE
Parallel Arm 5/8"
REF
6-3/4" 6-7/8" HO 6-1/8" 6-1/4" HO
3-7/8"
8-1/8" 5-5/8" BF 13-5/8" 1-3/4"
2-1/8"
HINGE
351
Norton PGS 348-354
1/17/03
Norton
9:52 AM
Page 5
®
N O R T O N® D O O R C L O S E R S
Series 7500/7500BF & 8301/8501 Door Closer Accessories 1-1/2" 4-7/8"
13-5/8"
3-15/16" 3-1/2"
#7786 Drop Plate — Narrow Top Rail For use where the narrowed directly to the door surface.This Drop Plate must be used for any Series 7500 mounted on a top rail between 1-7/8" and 3-3/8" in height.
#1618 —Soffit Plate Standard Installation This soffit plate is supplied standard with parallel arm closers. It can be mounted where the frame soffit is as narrow as 1".
13-5/8" 3-1/2"
5-1/8"
4-9/16"
#7788 Drop Plate — Narrow Top Rail For use where a narrow top rail prevents the closer from being mounted directly to the door surface.This Drop Plate can be used to mount a closer on a top rail as narrow as 2-3/8" in height.
13-5/8"
4-1/8"
2-9/16"
#1628H—Adapter Plate Parallel Hold-Open/Fusible-Link This adapter plate is supplied standard with most hold-open closers. It can also be used to convert regular arm or top jamb hold-open to parallel arm installation. It can be mounted where the frame soffit is as narrow as 1".
#7787— Overhead Door Holder Low Ceiling Clearance Drop Plate: For use where the ceiling clearance is between 1-7/8" and 3-7/8" or where a surface or concealed overhead door holder prevents normal top jamb mounting.This plate drops the closer and allows the arm mounting screws to clear the bottom of the door holder.This places the centerline of the arm mounting screws at 3-1/4" from the top of the door.
352
Toll Free: (800) 221-2052 http://www.mfsales.com
■ ■
Phone: (718) 622-8785 ■ Fax: (718) 789-8346 e-mail:
[email protected]
Norton PGS 348-354
1/17/03
9:52 AM
Page 6
Norton
NORTON DOOR CLOSERS ®
Series 8301/8501 Multi-Size Door Closer
■
■
Application Norton® Series 8301/8501 Multi-Size Door Closers feature springs that permit power adjustments through a range of sizes.These closers are available in two distinct power ranges. Series 8301/8501 are Normal Power Range Closers and are adjustable in a 2 thru 6 size range.These closers can be installed and adjusted to conform to the power requirements of conventionally sized closers.
■
■
®
Adjustable Latch Speed: An independent regulating valve, hex-key-operated, permits adjustment of the door’s speed for approximately the last 5° of the closing cycle. Adjustable Backcheck Cushioning: An independent regulating valve, hex-key-operated, provides an adjustable hydraulic cushion to the door opening speed toward the end of the opening cycle. Molded Slim Style Cover: Supplied as standard with 8301 and 8301BF closers; fabricated of high-impact U.L. listed material for covering the closer body and mounting screws. Molded Full Cover: Supplied as standard with 8501 and 8501BF closers; fabricated of high-impact U.L. listed material for covering the entire closer.This cover has breakout notches to permit proper handing during installation of the cover.
They meet the requirements of the Americans With Disabilities Act (A.D.A.) and are adjustable in a 1 thru 4 size range.These closers are lighter-powered than the Series 8301/8501 to reduce the door opening resistance to manageable levels for the handicapped and still provide acceptable door control.
Options ■ Adjustable Delayed Action Closing: An optional hydraulic feature that adds a third speed range to the closing cycle.This feature becomes effective when the door is opened and released at any point beyond 70°. ■ Hold-Open Arm: Closer has adjustable hold-open feature (90° to 180°).This arm is non-handed. Order by suffixing “H” to the Catalog Number.
Series 8301/8301BF closers are supplied with a molded Slim Style cover. Series 8501/8501BF are supplied with a molded Full cover; an optional metal Full cover or a wood laminated Full cover are available to order.
Finish ■ SB (689) Aluminum Sprayed, 313 (695) Dark Amber Sprayed, BL (691) Light Bronze Sprayed, 315 (693) Black Sprayed, GB (696) Satin Brass Sprayed, STAT (690) Dark Bronze Sprayed.
All Norton 8301/8501 Series closers with non-hold-open arms are listed by Underwriters Laboratories for use on selfclosing labeled fire doors (UL10C).
NOTE: Norton 8301/8501 Door Closers use #1618A Parallel arm brackets and the #1628H Parallel arm bracket for hold-open arms.
o Series 8301BF/8501BF are Accessibility Code Closers.
Features Multi-Size Power: The closer spring assembly can be adjusted through a wide power range.A high shoulder adjustment nut accepts a standard 9/16" socket a wrench. ■ Two Power Ranges: Each series can be adjusted through a range of sizes: Series 8301/8501 Normal Power Range Closers, sizes 2 thru 6; Series 8301BF/8501BF Accessibility Code Closers, sizes 1 thru 4,Tri-Style Installation: Standard closers packaged for regular arm, top jamb or parallel arm installation. ■ Non-Handed: Pinion shaft extends vertically through the closer body in both directions.This permits the closer body in both directions.This permits the closer to be positioned on either right or left hand doors for all applications. ■ Adjustable Sweep Speed: An independent regulating valve, hex-key-operated, permits adjustment of the general closing speed. ■
353
Norton PGS 348-354
1/17/03
Norton
9:52 AM
Page 7
®
N O R T O N® D O O R C L O S E R S
Installation for Series 8301/8501 Regular Arm HINGE
1-1/2"
2-1/2" 3-1/2" 2-7/8" FULL COVER
7"
13" 2-1/8"
Top Jamb 7"
2-1/8"
13"
HINGE
FULL COVER
2-7/8"
REVEAL
1-3/4"
1-3/4" 2-1/4"
Parallel Arm HINGE
6-1/4"
5-1/4" 2-7/8" FULL COVER
3-1/4"
13"
8-1/8" 2-1/8"
354
Toll Free: (800) 221-2052 http://www.mfsales.com
■ ■
Phone: (718) 622-8785 ■ Fax: (718) 789-8346 e-mail:
[email protected]
