Mercury Products Open Platform Solution Product Bulletin

Code No. LIT-12011850 Software Release 3.12 Issued April 4, 2014 Supersedes January 15, 2014 Refer to the QuickLIT website for the most up-to-date version of this document.

Johnson Controls, Inc. now offers Mercury Security Corporation’s high-quality access control hardware products, which can be integrated with the  Johnson Controls® P2000 Security Management System (SMS), providing added flexibility to help you meet the needs of your site’s security requirements, using products from a well-known and time-tested security manufacturer. The following Mercury hardware products are available separately or as part of a pre-configured security control panel assembly housed in a secure enclosure: •

CKM-EP2500, CKM-EP1501, and CKM-EP1502 intelligent controllers

•

CKM-MR51E, CKM-MR50, and CKM-MR52 reader interface modules

•

CKM-MR16IN input modules

•

CKM-MR16OUT output modules

•

DM-21 intrusion display

•

CKM-MUX-8 multiplexer

For an illustration on the P2000 and Mercury integration architecture, see Figure 1 on page 2. Using this mix of robust and feature-rich security products, you can find the solution that best fits your access control needs, such as IP and Power over Ethernet (PoE) capabilities, system scalability up to 64 doors, and support for installations that use RS-485 communications. The P2000 and Mercury access control products open platform solution offers multiple configuration options for small-to-large security applications, whether you are installing a new security system or retrofitting an existing one.

Table 1: Features and Benefits (Part 1 of 2) Features

Benefits

P2000 Host Software Integration

Provides a single, intuitive central software interface to configure and operate the controllers within the P2000 SMS.

IP Compatibility

Provides ease of installation, added flexibility, and potential cost savings in an existing IT infrastructure. IP-compatible controllers are auto-addressable with the use of an external Dynamic Host Configuration Protocol (DHCP) enabled server, or they can be manually configured using static IP addresses.

Power Over Ethernet (PoE)

Enables a single Ethernet cable to provide both power and communications to Mercury devices.

Support of Multiple Reader Technologies

Adds flexibility for systems that require a wide array of reader options, such as Wiegand®, clock and data, magnetic stripe, keypads, LCD, and biometrics.

Alarm Input Module

Allows the system to monitor high concentrations of supervised or unsupervised inputs together with a low requirement for output control. The CKM-MR16IN can support 16 general purpose input circuits.

Relay Output Module

Provides the ability to control high concentrations of outputs (16 general purpose) as Form C relay contacts, which can be used to control a variety of outboard devices for general facility control such as lighting, heating and cooling, door, and elevator control.

Security Panel Assemblies

Make it easy to power, house, and store the Mercury components in a secure enclosure and in a variety of configurations.

Elevator Integration Support

Allows P2000 to support up to 128 floors in a low-level interface with Mercury inputs and outputs used for floor selection and tracking. All elevator-related components are associated with a single Mercury controller.

Intrusion Integration Support

Enables sites to use Mercury components for an intrusion detection system within the P2000 SMS.

Data Expansion

Adds flexibility to expand a single data line into multiple data lines to meet difficult system design and installation challenges.

Mercury Products Open Platform Solution Product Bulletin

1

Table 1: Features and Benefits (Part 2 of 2) Features (Continued)

Benefits

Standards and Compliance

Helps your site meet certain agency requirements such as UL 294, CE, Restriction of Hazardous Substances (RoHS), Federal Communications Commission (FCC) Part 15 Class A.

Remote Update Feature

Enables you to update Mercury firmware remotely using the P2000 server, saving time and cost on travel and technician service calls. P2000 Workstation

P2000 Server

CKM-MR51E

Door 1

Wide Area Network IP Network CKM-EP2500

RS-485

CKM-MR52

CKM-EP1502

Door 1

CKM-EP1501

Door 2

RS-485

CKM-MR52

CKM-MR52

Supports 2 Doors

Supports 2 Doors

Supports 2 Doors

CKM-MR50

CKM-MR50

CKM-MR50

Supports 1 Door

Supports 1 Door

Supports 1 Door

CKM-MR16IN

CKM-MR16IN

RS-485

CKM-MR16IN

16 General Purpose Inputs 2 Relay Outputs

16 General Purpose Inputs 2 Relay Outputs

16 General Purpose Inputs 2 Relay Outputs

CKM-MR16OUT

CKM-MR16OUT

CKM-MR16OUT

16 Relay Outputs

16 Relay Outputs

16 Relay Outputs Scalable to 64 Doors

Scalable to 64 Doors

Scalable to 17 Doors

Figure 1: P2000 and Mercury Integration Architecture

2

Mercury Products Open Platform Solution Product Bulletin

Door 1

Access Platform CKM-EP2500 Controller

Benefits

The Access Platform CKM-EP2500 is an intelligent controller platform with native network support. This powerful and high-performance platform provides an Ethernet-ready controller capable of efficiently managing a large network of Mercury access modules in multiple system designs.

•

Network ready

•

System intelligence decentralized

•

Intelligent oversight and auxiliary monitoring

•

Scalable to 64 doors

Based on the intelligent, next-generation Mercury Access Foundation, the CKM-EP2500 uses an Ethernet link to connect to the Microsoft® Windows® based P2000 host to provide access control, alarm management, and scheduled operations all in one package. The CKM-EP2500 is capable of elaborate processes and procedures without host intervention. Once configured, the CKM-EP2500 functions independently of the host, and is capable of controlling access, managing alarms, and interfacing with an array of Mercury hardware devices, all while providing the decision-making oversight that each system configuration requires. CKM-EP2500 supports the range of reader technologies, including Wiegand, magnetic stripe, and biometric RS-485 connectivity.

Note: The CKM-EP2500 does not support shared mode and central mode communications with the P2000 host.

Features •

Fault-tolerant IP communications capability

•

Multi-card format support

•

Multi-reader technology support

•

Transport Layer Security (TLS) encryption support between P2000 server and controller

•

Alarm keypad support for intrusion applications

•

Optional Dual-LAN support for connection redundancy1

•

Anti-Passback support1

•

Snow-Emergency Support1

Technical Specifications Table 2: CKM-EP2500 Controller Specifications Item

Specification

Primary Power

12-24 VDC +/- 10%, 300 mA maximum

Ethernet/Serial Ports

Primary 10/100 Ethernet Port 1: RS-232, 2-wire RS-485, dial-up, or secondary Ethernet Port 2: 2-wire RS-485 Port 3: 2-wire, RS-485

Inputs

Two dedicated: tamper and power monitor

Dimensions

5.0 in. W x 6.0 in. L x 1.0 in. H (127 mm W x 152 mm L x 25 mm H)

Temperature

Operational: 0° to 49°C Storage: -55° to 85°C

Humidity

10 to 93% Relative Humidity Non Condensing (RHNC)

Figure 2: CKM-EP2500 Intelligent Controller

Application Notes As an intelligent system cornerstone, the CKM-EP2500 provides the greatest system capacity within Mercury’s family of controller platforms. The Access Platform CKM-EP2500 is best deployed in systems where highend capabilities and network-ready capacity are required. For high device counts, large numbers of readers, and a high volume of system activity, the CKM-EP2500 is the controller of choice.

1.

This feature requires P2000 Version 3.12 Service Pack 2.

Mercury Products Open Platform Solution Product Bulletin

3

CKM-EP2500 Architecture Diagram P2000 Server

P2000 CKM-MR51E Workstation

Door 1

Wide Area Network IP Network Door 1

Door 2 Door 1

CKM-EP2500 RS-485

CKM-MR52 CKM-MR50

CKM-MR16IN CKM-MR16OUT

General Purpose Inputs (16)

Dedicated Inputs (2)

Relay Outputs (2)

Relay Outputs (16)

Dedicated Inputs (2)

Scalable to 64 Doors

Figure 3: Architecture Diagram of the CKM-EP2500 Controller

4

Mercury Products Open Platform Solution Product Bulletin

Technical Features Table 3: CKM-EP2500 Technical Features Feature

Description

Connectivity

Primary Port: 10/100 Ethernet, DHCP Client, TLS, X.509

Access Control

• •

500,000 cardholder capacity 50,000 transaction buffer

Card Formats

• • • •

8 active card formats per CKM-EP2500 Entire card number reported on invalid read 18-digit (63-bit) UserId and 9-digit Personal Identification Numbers (PIN) maximum Personal Identify Verification (PIV) II, Common Access Card (CAC), and Transportation Worker Identification Credential (TWIC™) card compatible 32 access groups per cardholder Activation/Deactivation dates Reader-based or time-based access control

• • • Compliance1

1.

United States: UL Listed Subassembly under UL 1076 for Proprietary Burglar Alarm Units and Systems, and under UL 294 for Access Control Systems Units; FCC compliant to the limits for a Class A digital device, pursuant to Part 15 of the FCC rules Canada: cUL Listed Subassembly under ULC/ORD-C1076 Proprietary Burglar Alarm Units and System; Class A digital apparatus, complies with Canadian ICES-003 Europe: CE Mark - Johnson Controls, Inc. declares that this product is in compliance with the EMC Directive  2004/108/EC. Australia and New Zealand: C-Tick Mark, Australia/NZ emissions compliant

CKM-EP2500 must be installed in CKM enclosure to be UL Listed.

Ordering Information Table 4: Ordering Information Part Number

Description

CKM-EP2500

CKM-EP2500 Mercury network controller

Related Documentation Table 5: Related Documentation Document Title

Document Number

Mercury CKM-EP2500 Controller Hardware Installation Manual

Part No. 24-10707-23

CKM-EP2500, CKM-EP1502, and CKM-EP1501 Mercury Network Controllers Catalog Page

LIT-1900829

Mercury Products Open Platform Solution Product Bulletin

5

Access Platform CKM-EP1501 Controller

•

Network ready

The Access Platform CKM-EP1501 is an intelligent controller within the EP platform family and is built on the Mercury Access Foundation. The CKM-EP1501 provides a high-performance, Ethernet-ready, costeffective dual card reader panel capable of controlling a single opening. The CKM-EP1501 is expandable up to 8 downstream supervised input/output (SIO) controllers and up to 16 CKM-MR51E network ready door controllers for a total of 17 doors. Easy installation with PoE makes this the top choice for a single-door controller.

•

Scalable to 17 doors

Once configured, the CKM-EP1501 functions independently of the host and is capable of controlling access and managing elaborate processes such as relating selected system devices and their activity to other onboard devices, allowing actions and activities to transpire without host intervention. Offering powerful flexibility, the CKM-EP1501 is capable of interfacing with an array of reader technologies for a single opening. Reader ports support separate in/out readers and technologies that include Wiegand, clock and data, RS-485, magnetic stripe, keypads, LCD, and biometrics.

Features •

Seamless P2000 software interface integration

•

Supports multiple card formats and card reader technologies

•

TLS encryption support between P2000 server and controller

•

PoE capable

•

Triple gang footprint

•

CKM-MR51E support (up to 16)

•

SIO module interface capability (up to 8)

•

Anti-Passback support1

•

Snow-Emergency Support1

Technical Specifications Table 6: CKM-EP1501 Controller Specifications Item

Specification

Power Input

PoE Power Input 12.95 W, compliant to IEEE 802.3af or 12 VDC ± 10% 900 mA maximum power supply Note: For UL installations, PoE powered devices shall not be used. Power for these devices must be provided by a UL 294 listed power limited source (12 VDC).

Power Output

12 VDC at 650 mA, including reader and AUX output

Reader Interface

Reader Power: PoE: 12 VDC ± 10% or local power supply (12 VDC). (PTC limited 150 mA maximum)

Inputs

2 general purpose programmable circuit type, and dedicated tamper

Outputs

2 relays Form C, 2 A at 30 VDC

Reader Ports

Two Transistor–Transistor Logic (TTL) reader ports or one 2-wire RS-485 reader port capable of supporting two readers

Application Notes

Keypad

Multiplexed with card data

The CKM-EP1501 seamlessly interfaces a single opening with a larger system for easy expansion. Providing all the intelligence and functionality of the Mercury family of controllers, the CKM-EP1501 is PoE capable and sets the standard for powerful, reliable performance, all at an economical price point.

LED

Two-wire or one-wire bicolor support

Buzzer

Only with one-wire LED

Dimensions

Without Bracket: 5.5 in. W x 2.75 in. L x 0.96 in. H (140 mm W x 70 mm L x 24 mm H) With Bracket: 5.5 in. W x 3.63 in. L x 1.33 in. H (140 mm W x 92 mm L x 34 mm H)

Benefits

Temperature

Operational: 0° to 49°C Storage: -55° to 85°C

Humidity

10 to 93% RHNC

Figure 4: CKM-EP1501 Intelligent Controller

•

System intelligence decentralized

•

Single-door interface

1.

6

This feature requires P2000 Version 3.12 Service Pack 2.

Mercury Products Open Platform Solution Product Bulletin

CKM-EP1501 Architecture Diagram P2000 Server

P2000 CKM-MR51E Workstation

Door 1

Wide Area Network IP Network Door 1

Door 2

Door 1 Door 1

CKM-EP1501 RS-485

CKM-MR52 CKM-MR50

CKM-MR16IN CKM-MR16OUT

General Purpose Inputs (16)

Dedicated Inputs (2)

Relay Outputs (2)

Relay Outputs (16)

Dedicated Inputs (2)

Scalable to 17 Doors

Figure 5: Architecture Diagram of the CKM-EP1501 Controller

Mercury Products Open Platform Solution Product Bulletin

7

Technical Features Table 7: CKM-EP1501 Technical Features Feature

Description

Connectivity

Primary Port: 10/100 Ethernet

Door Control

One physical barrier can be controlled using single or paired readers. Two reader ports: Mag, Wiegand, or RS-485 (RS-485 on one reader port capable of supporting two readers) Two supervised inputs, two relays. Diagnostic LEDs. Dedicated tamper input.

Access Control

• • • •

240,000 cardholders 50,000 transaction buffer 32 access groups per cardholder 18-digit (63-bit) UserId and 9-digit PIN numbers maximum

Card Formats

• • •

8 active card formats per CKM-EP1501 PIV-II, CAC, and TWIC card compatible Reader-based or time-based access control

Alarm Management

Normally open/closed, unsupervised, supervised. Standard or custom end-of-line resistances

Compliance1

United States: UL Listed Subassembly under UL 1076 for Proprietary Burglar Alarm Units and Systems, and under UL 294 for Access Control Systems Units; FCC compliant to the limits for a Class A digital device, pursuant to Part 15 of the FCC rules Canada: cUL Listed Subassembly under ULC/ORD-C1076 Proprietary Burglar Alarm Units and System; Class A digital apparatus, complies with Canadian ICES-003 Europe: CE Mark - Johnson Controls, Inc. declares that this product is in compliance with the EMC Directive 2004/108/EC. Australia and New Zealand: C-Tick Mark, Australia/NZ Emissions Compliant

1.

CKM-EP1501 must be installed in CKM enclosure to be UL Listed.

Ordering Information Table 8: Ordering Information Part Number

Description

CKM-EP1501

CKM-EP1501 Mercury network controller

Related Documentation Table 9: Related Documentation Document Title

Document Number

Mercury CKM-EP1501 Controller Hardware Installation Manual

Part No. 24-10707-7

CKM-EP2500, CKM-EP1502, and CKM-EP1501 Mercury Network Controllers Catalog Page

LIT-1900829

8

Mercury Products Open Platform Solution Product Bulletin

Access Platform CKM-EP1502 Controller

Benefits

Based on the intelligent Mercury Access Foundation, the Access Platform CKM-EP1502 platform uses an Ethernet link to connect to a Windows-based P2000 host to provide access control, alarm management, and scheduled operations, all in one package. With native connectivity, the CKM-EP1502 platform functions independently of the host, controlling access, managing alarms, and interfacing with an array of reader technologies through its Wiegand, magnetic stripe, and biometric RS-485 connectivity. The result is the flexibility, versatility, and reliability you need for system success.

•

System intelligence decentralized

•

Two-door interface with auxiliary I/O

•

Scalable to 64 doors

Alarm Management capabilities include standard or customized end-of-line resistances, programmable sensitivity, and hold time for line conditioning,  entry delay latching and unlatching options,  and entry-exit delays.

Features •

Multi-card format support

•

Multi-reader technology support

•

TLS encryption support between P2000 server and controller

•

Alarm keypad support

•

Anti-Passback support1

•

Snow-Emergency Support1

Technical Specifications Table 10: CKM-EP1502 Controller Specifications

Figure 6: CKM-EP1502 Intelligent Controller

Application Notes The Access Platform CKM-EP1502 is the intelligent cornerstone of an access system, providing support  for two readers and the capacity to expand to up to  64 doors. Reliably distributing intelligence, the  CKM-EP1502 ensures that activities generated by select devices can be related to other devices for continued actions without host intervention.

Item

Specification

Primary Power

12-24 VDC +/- 10%, 500 mA maximum

Ethernet/Serial Ports

Primary 10/100 Ethernet Port 1: RS-232 Port 2: RS-485, 2-wire

Inputs

8 general purpose: programmable circuit type; Two dedicated: tamper and power monitor

Outputs

4 relays: Form C, 5 A at 30 VDC

Reader Ports

2 reader ports

Power

Unregulated pass through (150 mA maximum); Signaling Card/Data, Wiegand, or RS-485

Keypad

Multiplexed with card data

LED

Two-wire or one-wire bicolor support

Buzzer

Only with one-wire LED

Dimensions

6.0 in. W x 8.0 in. L x 1.0 in. H (152 mm W x 203 mm L x 25 mm H)

Temperature

Operational: 0° to 49°C Storage: -55° to 85°C

Humidity

10 to 93% RHNC

1.

This feature requires P2000 Version 3.12 Service Pack 2.

Mercury Products Open Platform Solution Product Bulletin

9

CKM-EP1502 Architecture Diagram P2000 CKM-MR51E Workstation

P2000 Server

Door 1

Wide Area Network IP Network Door 1

Door 2

CKM-EP1502 Door 1

Door 1

RS-485

Door 2

CKM-MR52 CKM-MR50

CKM-MR16IN CKM-MR16OUT

General Purpose Inputs (16)

Dedicated Inputs (2)

Relay Outputs (2)

Relay Outputs (16)

Dedicated Inputs (2)

Scalable to 64 Doors

Figure 7: Architecture Diagram of the CKM-EP1502 Controller

10

Mercury Products Open Platform Solution Product Bulletin

Technical Features Table 11: CKM-EP1502 Technical Features Feature

Description

Connectivity

Primary Port: 10/100 Ethernet; RS-232, Dial-up

Door Control

Two reader ports: Mag, Wiegand, or RS-485; Eight supervised inputs, four relays. Diagnostic LEDs

Access Control

• • • • •

250,000 cardholder capacity 50,000 transaction buffer 32 access groups per cardholder 18-digit (63-bit) UserId and 9-digit PIN numbers maximum Activation/Deactivation dates

Card Formats

• • • •

8 active card formats per CKM-EP1502 PIV-II, CAC, and TWIC card compatible Anti-passback support Reader-based or time-based access control

Alarm Management

Normally open/closed, unsupervised, supervised. Standard or custom end-of-line resistances.

Compliance1

United States: UL Listed Subassembly under UL 1076 for Proprietary Burglar Alarm Units and Systems, and under UL 294 for Access Control Systems Units; FCC compliant to the limits for a Class A digital device, pursuant to Part 15 of the FCC rules Canada: cUL Listed Subassembly under ULC/ORD-C1076 Proprietary Burglar Alarm Units and System; Class A digital apparatus, complies with Canadian ICES-003 Europe: CE Mark - Johnson Controls, Inc. declares that this product is in compliance with the EMC Directive 2004/108/EC. Australia and New Zealand: C-Tick Mark, Australia/NZ Emissions Compliant

1.

CKM-EP1502 must be installed in CKM enclosure to be UL Listed.

Ordering Information Table 12: Ordering Information Part Number

Description

CKM-EP1502

CKM-EP1502 Mercury network controller

Related Documentation Table 13: Related Documentation Document Title

Document Number

Mercury CKM-EP1502 Controller Hardware Installation Manual

Part No. 24-10707-15

CKM-EP2500, CKM-EP1502, and CKM-EP1501 Mercury Network Controllers Catalog Page

LIT-1900829

Mercury Products Open Platform Solution Product Bulletin

11

CKM-EPxxxx Controller Comparison Matrix Table 14: CKM-EPxxxx Controller Comparison Matrix Item/Feature1

CKM-EP2500

CKM-EP1502

CKM-EP1501

Primary Power

12-24 VDC

12-24 VDC

12 VDC

Power Over Ethernet

No

No

Yes

Dual LAN Option

Yes

No

No

Battery

Coin cell, Field replaceable

Coin cell, Field replaceable

Rechargeable, Not field replaceable

Onboard Inputs

2 dedicated (tamper and power monitor)

8 general purpose,  2 dedicated (tamper/power monitor)

2 general purpose, Dedicated tamper

Onboard Outputs

0

4 relays

2 relays

Onboard Readers

0

2 reader ports

2 reader ports (first reader port could be used instead for downstream RS-485 communications)

Reader Port Voltage

N/A

12-24 V or 12 V

12 V

Downstream RS-485 Ports

2

1

1 (replaces first reader port)

Card DB Memory

15 Mb

6 Mb

6 Mb

Real-Time Clock

Yes

Yes

No

Yes

Yes

Yes

Support Schlage® PIM400-485 (Up to 16)

Yes

No

Yes

Maximum Number of Readers

64

64

17

Maximum Number of Supervised Inputs/Outputs (SIOs) without reader modules

512

512

128

Maximum Number of  CKM-MR51E modules

32

32

16

Anti-Passback Support

Yes

Yes

Yes

Snow-Emergency Support

Yes

Yes

Yes

®

Aperio®

ASSA ABLOY RS-485 Hub (Up to 8)

1.

12



Some features were not evaluated by Underwriters Laboratories.

Mercury Products Open Platform Solution Product Bulletin

Access Platform CKM-MR51E IP Reader Interface Module The Access Platform CKM-MR51E is a networkconnected, single-door, power-over-Ethernet (POE) capable interface module that provides an ideal integration solution with the P2000 SMS. Two reader ports support separate in/out readers of all types and technologies, including Wiegand, clock and data, magnetic stripe, keypads, LCD, and biometrics. Auto-addressable and directly managed by the  CKM-EP2500, CKM-EP1501, and CKM-EP1502 Mercury intelligent controllers, the CKM-MR51E is capable of elaborate processes and procedures without host intervention.

Application Notes Built on the Access Platform, the CKM-MR51E relates the activities of selected system devices to other devices within the system, generating actions and allowing activities to transpire independent of the host. The CKM-MR51E’s support of paired readers enhances the ability to meet installation challenges, such as placing readers at varying heights or distances to accommodate ingress and egress of handicapped, vehicle, or foot traffic. These readers can be logically linked together, yet function independently when access identification is presented to either one. When access rights are granted, the same relay functions, as programmed, to unlock the opening.

Benefits •

Flexible, versatile support of paired readers

•

Network ready

•

Easily installed

•

Support of a wide range of reader technologies

Features •

Multi-facility code support

•

Multi-reader technology support

•

PoE enabled

•

Auto-addressable

•

TLS encryption support

Figure 8: CKM-MR51E Reader Interface Module

Technical Specifications The interface is for use in low-voltage, Class 2 circuits only. Table 15: CKM-MR51E Reader Interface Module Specifications (Part 1 of 2) Item

Specification

Power Input

PoE Power Input 12.95 W, compliant to Institute of Electrical and Electronics Engineers (IEEE) 802.3af (or 10 to 14 VDC power supply)

Power Output

12 VDC at 700 mA, including reader and AUX output Output: Form-C contacts: K1, K2: 5 A at 28 VDC Inputs: 4 supervised, End-of-Line resistors, 1k/1k - ohm,1% 1/4 W standard

Reader Interface

Reader Power: 12 VDC ± 10% or pass through. (PTC limited 150 mA maximum) Reader LED Output: TTL compatible, high > 3 V, low < 0.5 V, 5 mA source/sink maximum Buzzer Output: Open collector, 5 VDC open circuit maximum, 10 mA sink maximum Reader Data Inputs: TTL-compatible inputs or 2-wire RS-485

Communication

Ethernet, 10Base-T/100Base-TX

Mercury Products Open Platform Solution Product Bulletin

13

Table 15: CKM-MR51E Reader Interface Module Specifications (Part 2 of 2) Item (Continued)

Specification

Cable Requirements

Power: 18 AWG, 1 twisted pair RS-485: 24 AWG, 120-ohm impedance, twisted pair with shield, 4,000 feet (1,219 m) maximum Alarm Inputs: 1 twisted pair per input, 30-ohm maximum Reader Data (TTL): 18 AWG, 6 conductors, 500 feet (150 m) maximum Reader Data (RS-485): 24 AWG, 120-ohm impedance, twisted pair with shield, 2,000 feet (1,219 m) maximum

Mechanical

Dimension: 5.5 in. W x 2.75 in. L (140 mm W x 70 mm L) Weight: 4.2 oz. (120 g) without bracket

Temperature

Operational: 0°C to 49°C Storage: -55°C to 85°C

Humidity

10% to 93% RHNC

Compliance1

United States: UL Listed Subassembly under UL 1076 for Proprietary Burglar Alarm Units and Systems, and under UL 294 for Access Control Systems Units; FCC compliant to the limits for a Class A digital device, pursuant to Part 15 of the FCC rules Canada: cUL Listed Subassembly under ULC/ORD-C1076 Proprietary Burglar Alarm Units and System; Class A digital apparatus, complies with Canadian ICES-003 Europe: CE Mark - Johnson Controls, Inc. declares that this product is in compliance with the EMC Directive  2004/108/EC. Australia and New Zealand: C-Tick Mark, Australia/NZ emissions compliant

1.

14

CKM-MR51E must be installed in CKM enclosure to be UL Listed.

Mercury Products Open Platform Solution Product Bulletin

CKM-MR51E Architecture Diagram P2000 Server

P2000 Workstation

Wide Area Network IP Network

CKM-EP2500/ 1501/1502 Controller

CKM-MR51E

CKM-MR51E

2 Relay Outputs Reader 1

4 Supervised Inputs

Reader 2 General Purpose I/O Support

1 Door with 2 Reader Support

Figure 9: Architecture Diagram of the CKM-MR51E Reader Interface Module

Ordering Information Table 16: Ordering Information Part Number

Description

CKM-MR51E

CKM-MR51E Mercury IP reader interface module

Related Documentation Table 17: Related Documentation Document Title

Document Number

CKM-MR51E Mercury PoE Module Hardware Installation Manual

Part No. 24-10707-58

Mercury Reader Interface Modules Catalog Page

LIT-1900830

Mercury Products Open Platform Solution Product Bulletin

15

Access Platform CKM-MR50 The Access Platform CKM-MR50 is a low-cost, highperformance, single card reader interface module capable of all the I/O needed for controlling a single door. Each CKM-MR50 supports one card reader, two general purpose input monitor points, and two control relays to provide access control and security monitoring through a Mercury EP intelligent controller. The CKM-MR50’s reader port supports magnetic stripe, Wiegand, and RS-485 readers, including keypads and integrated keypad readers. Hardware interface and card format settings are downloaded through software commands. With its compact footprint and RS-485 connectivity, the CKM-MR50 can be clustered (multiple devices in an enclosure) or distributed (standalone) to best suit the installation environment. The inputs and the relays may be assigned to doorrelated functions or to general purpose I/O. The inputs support normally open, normally closed, supervised, and non-supervised circuits. End-of-line (EOL) resistance values are configurable. The relays can be configured for fail safe or fail secure operation.

Application Notes The CKM-MR50 is a versatile, reliable interface module for a single door. When connected to a Mercury EP intelligent controller, the CKM-MR50 passes access request and status change information to the intelligent controller for processing. Data and activities from selected system devices pass to other devices in the network, generating actions and activities as they transpire, independent of the host computer. Even when not connected to an intelligent controller, the CKM-MR50 is capable of locally processing access requests based on facility code verification. Up to eight facility codes may be active in each CKM-MR50.

Figure 10: CKM-MR50 Reader Interface Module

Benefits •

Provides all I/O needed for single door control

•

Easily connects to Mercury’s EP intelligent controllers

•

Small size versatility

Features •

2 programmable inputs; 2 programmable relay outputs

•

Multi-facility code support

•

Multi-reader technology support

Technical Specifications Table 18: CKM-MR50 Technical Specifications (Part 1 of 2) Item

Specification

Electrical

Primary Power: 12-24 VDC +/- 10%, 150 mA maximum 12 VDC at 110 mA nominal 24 VDC at 60 mA nominal

Communication

RS–485, 2-wire, 4,000 feet (twisted pair with shield, Belden® 9841)

Reader Port

1 Reader Port Power: Input voltage pass through Data Card/Keypad, Clock/Data, Data–1/Data–0, or RS-485

LED

One-wire, or two-wire bi-color LED support

Buzzer

Only with one-wire LED

16

Mercury Products Open Platform Solution Product Bulletin

Table 18: CKM-MR50 Technical Specifications (Part 2 of 2) Item (Continued)

Specification

Inputs

2 general purpose (programmable circuit type) 1 dedicated (tamper)

Output Relays

Relay 1: Form–C, 5 A 30 VDC Relay 2: Form–C, 1 A 30 VDC

Dimensions

2.75 in. L x 4.25 in. W x 1.0 in. H, (70 mm L x 108 mm W x 25.4 mm H)

Temperature

Operational: 0° to 49°C Storage: -55° to 85°C

Humidity

10 to 93% RHNC 1

Compliance

1.

United States: UL Listed Subassembly under UL 1076 for Proprietary Burglar Alarm Units and Systems, and under UL 294 for Access Control Systems Units; FCC compliant to the limits for a Class A digital device, pursuant to Part 15 of the FCC rules Canada: cUL Listed Subassembly under ULC/ORD-C1076 Proprietary Burglar Alarm Units and System; Class A digital apparatus, complies with Canadian ICES-003 Europe: CE Mark - Johnson Controls, Inc. declares that this product is in compliance with the EMC Directive 2004/108/EC. Australia and New Zealand: C-Tick Mark, Australia/NZ emissions compliant

CKM-MR50 must be installed in CKM enclosure to be UL Listed.

Mercury Products Open Platform Solution Product Bulletin

17

CKM-MR50 Architecture Diagram P2000 Workstation

P2000 Server

Wide Area Network IP Network

CKM-EP2500/1501/1502 Controller RS-485

CKM-MR50

Reader 1

CKM-MR50

2 Relay Outputs

2 Supervised Inputs

General Purpose I/O Support 1 Door with 1 Reader Support

Figure 11: Architecture Diagram of the CKM-MR50 Reader Interface Module

Ordering Information Table 19: Ordering Information Part Number

Description

CKM-MR50

CKM-MR50 Mercury reader interface module

Related Documentation Table 20: Related Documentation Document Title

Document Number

CKM-MR50 Mercury Terminal Module Hardware Installation Manual

Part No. 24-10707-31

Mercury Reader Interface Modules Catalog Page

LIT-1900830

18

Mercury Products Open Platform Solution Product Bulletin

Access Platform CKM-MR52

Application Notes

The CKM-MR52 is a low-cost, high-performance reader interface module that provides all the I/O needed for controlling two doors with auxiliary point control and monitoring. Each unit provides out-bound flexibility for Authentic Mercury EP Series intelligent controllers supporting two card readers, eight general purpose input monitor points, and six control relays.

The CKM-MR52 is a versatile and reliable reader interface module for two doors. When connected to a Mercury EP intelligent controller, the CKM-MR52 passes access requests and status change information to the controller, processing data and activities from selected system devices to other devices in the network, generating actions and activities as they transpire, independent of the P2000 host computer. Even when not connected to an intelligent controller, the CKM-MR52 is capable of locally processing access requests based on facility code verification. Several facility codes may be active in each CKM-MR52.

With two-wire RS-485 connectivity, the CKM-MR52’s two reader ports support magnetic stripe, Wiegand, and RS-485 readers, including keypads and integrated keypad readers. The inputs and the relays may be assigned to doorrelated functions or to general purpose I/O. The inputs support normally open, normally closed, supervised, and non-supervised circuits. End-of-line (EOL) resistance values are configurable. The relays can be configured for fail safe or fail secure operation.

Benefits •

Affordable flexibility to add 2 doors

•

Reliable support of a wide variety of sensors and control technologies

•

Easy to install

Features •

Multi-facility code support

•

Multi-reader technology support

Figure 12: CKM-MR52 Reader Interface Module

Technical Specifications Table 21: CKM-MR52 Technical Specifications (Part 1 of 2) Item

Specification

Primary Power

12-24 VDC +/- 10%, 550 mA maximum 12 VDC at 450 mA nominal 24 VDC at 270 mA nominal

Communication

RS–485, 2-wire, 4,000 feet (twisted pair with shield, Belden 9841)

Reader Port

2 Reader Ports Power: 12 VDC regulated, 125 mA each reader Data Card/Keypad, Clock/Data, Data–1/Data–0, or RS-485

Keypad

8-bit Mercury, 8-bit Dorado, 4-bit HID®

LED

One-wire bi-color LED support, or two-wire

Buzzer

Only with one-wire LED

Mercury Products Open Platform Solution Product Bulletin

19

Table 21: CKM-MR52 Technical Specifications (Part 2 of 2) Item (Continued)

Specification

Inputs

8 general purpose (programmable circuit type) 2 dedicated (tamper and power monitor)

Output

6 relays: Form–C, 5 A 28 VDC

Dimensions

6.0 in. W x 8.0 in. L x 1.0 in. H (152 mm W x 203 mm L x 25 mm H)

Temperature

Operational: 0° to 49°C Storage: -55° to 85°C

Humidity

10 to 93% RHNC 1

Compliance

1.

20

United States: UL Listed Subassembly under UL 1076 for Proprietary Burglar Alarm Units and Systems, and under UL 294 for Access Control Systems Units; FCC compliant to the limits for a Class A digital device, pursuant to Part 15 of the FCC rules Canada: cUL Listed Subassembly under ULC/ORD-C1076 Proprietary Burglar Alarm Units and System; Class A digital apparatus, complies with Canadian ICES-003 Europe: CE Mark - Johnson Controls, Inc. declares that this product is in compliance with the EMC Directive 2004/108/EC. Australia and New Zealand: C-Tick Mark, Australia/NZ emissions compliant

CKM-MR52 must be installed in CKM enclosure to be UL Listed.

Mercury Products Open Platform Solution Product Bulletin

CKM-MR52 Architecture Diagram P2000 Workstation

P2000 Server

Wide Area Network IP Network

CKM-EP2500/1501/1502 Controller RS-485

CKM-MR52

CKM-MR52

6 Relay Outputs Reader 1

8 Supervised Inputs

Reader 2 General Purpose I/O Support

1 Door with 2 Reader Support

Figure 13: Architecture Diagram of the CKM-MR52 Reader Interface Module

Ordering Information Table 22: Ordering Information Part Number

Description

CKM-MR52

CKM-MR52 Mercury reader interface module

Related Documentation Table 23: Related Documentation Document Title

Document Number

CKM-MR52 Mercury Terminal Module Hardware Installation Manual

Part No. 24-10707-66

Mercury Reader Interface Modules Catalog Page

LIT-1900830

Mercury Products Open Platform Solution Product Bulletin

21

Access Platform CKM-MR16IN The CKM-MR16IN is a multi-device interface module providing the ability to monitor high concentrations of inputs together with a low requirement for output control. Based on the intelligent Mercury Access Foundation, the CKM-MR16IN is capable of supporting 16 general purpose input circuits, which can be individually set for normally open or normally closed operations, and can be declared supervised and non-supervised. Individually configurable parameters can be set for sensitivity ranges, timing parameters, and end-of-line resistance values. Two programmable relay outputs can be configured for fail safe or fail secure operation, supporting On, Off, Pulse, and Repeating Pulse commands. With these powerful control-point capacities onboard, the CKM-MR16IN is capable of input-output linking (that is, controlling outboard devices and being activated by the condition of selected system devices locally or regionally) without host intervention.

Application Notes The CKM-MR16IN is an integral component to support Mercury’s flexible, building-block approach to access control system design. The CKM-MR16IN provides the capacity to link, control, and respond to an array of sensors. And with its RS-485 connectivity, it can be clustered (multiple devices in an enclosure) or distributed (standalone) to best suit each installation environment.

Figure 14: CKM-MR16IN Input Module

Benefits •

Built-in capacity to control and respond to external device commands

•

Easily integrates lighting, heating and cooling, door, or elevator control sensors

•

Initiate commands by operator, time schedules, or events

Features •

16 programmable inputs; 2 programmable relay outputs

•

2-wire RS-485 communication

•

Configurable input parameters

•

Compatible across Mercury’s intelligent controller families

Technical Specifications Table 24: CKM-MR16IN Technical Specifications (Part 1 of 2) Item

Specification

Electrical

Primary Power: 12-24 VDC +/- 10%, 350 mA maximum 12 VDC at 300 mA nominal 24 VDC at 220 mA nominal

Communication

RS–485, 2-wire, 4,000 feet (twisted pair with shield, Belden 9841)

Inputs

16 general purpose (programmable circuit type) 2 dedicated (tamper and power monitor)

22

Mercury Products Open Platform Solution Product Bulletin

Table 24: CKM-MR16IN Technical Specifications (Part 2 of 2) Item (Continued)

Specification

Outputs

2 relays (Form–C, 5 A at 28 VDC)

Dimensions

6.0 in. W x 8.0 in. L x 1.0 in. H (152 mm W x 203 mm L x 25 mm H)

Temperature

Operational: 0° to 49°C Storage: -55 to 85°C

Humidity

10 to 93% RHNC

Compliance1

United States: UL Listed Subassembly under UL 1076 for Proprietary Burglar Alarm Units and Systems, and under UL 294 for Access Control Systems Units; FCC compliant to the limits for a Class A digital device, pursuant to Part 15 of the FCC rules Canada: cUL Listed Subassembly under ULC/ORD-C1076 Proprietary Burglar Alarm Units and System;  Class A digital apparatus, complies with Canadian ICES-003 Europe: CE Mark - Johnson Controls, Inc. declares that this product is in compliance with the EMC Directive  2004/108/EC. Australia and New Zealand: C-Tick Mark, Australia/NZ emissions compliant

1.

CKM-MR16IN must be installed in CKM enclosure to be UL Listed.

Mercury Products Open Platform Solution Product Bulletin

23

CKM-MR16IN Architecture Diagram P2000 Workstation

P2000 Server

Wide Area Network IP Network

CKM-EP2500/1501/1502 Controller RS-485

CKM-MR16IN

16 Supervised Inputs

2 Relay Outputs

General Purpose I/O Support

Figure 15: Architecture Diagram of the CKM-MR16IN Input Module Ordering Information Table 25: Ordering Information Part Number

Description

CKM-MR16IN

CKM-MR16IN Mercury input module

Related Documentation Table 26: Related Documentation Document Title

Document Number

CKM-MR16IN Mercury Terminal Module Hardware Installation Manual

Part No. 24-10707-74

Mercury Input/Output Interface Modules Catalog Page

LIT-1900835

24

Mercury Products Open Platform Solution Product Bulletin

Access Platform CKM-MR16OUT The Access Platform CKM-MR16OUT is a multi-device interface module that provides the ability to control high concentrations of outputs. With 16 general purpose outputs as Form C relay contacts, the CKM-MR16OUT interfaces with Mercury’s EP intelligent controllers to add versatility to access control and security monitoring systems. Based on the intelligent Mercury Access Foundation, the CKM-MR16OUT can be configured to control a variety of outboard devices for general facility control such as lighting, heating and cooling, door, and elevator control. Devices can be activated by the condition of selected system devices locally or regionally without host intervention. The CKM-MR16OUT provides individually configurable parameters to be set for timing and for fail safe or fail secure modes. Relay operation may be initiated by direct operator commands, by time schedules, or by event-based procedures. The relays support On, Off, Pulse, and Repeating Pulse commands.

Application Notes The CKM-MR16OUT is an essential component to support Mercury’s flexible, building block approach to access control system design. Providing flexibility and versatility, the CKM-MR16OUT offers unmatched power to widen the range of devices and building controls that can be included in system design. Add building controls such as lighting or HVAC, with devices activated locally or regionally without host intervention.

Figure 16: CKM-MR16OUT Output Module

Benefits •

Built-in capacity to control and respond to external device commands

•

Easily integrates lighting, heating and cooling, door, or elevator controls

•

Initiates commands by operator, time schedules, or events

Features •

Power supervision and tamper monitoring

•

Compatible with all CKM-EP Mercury controllers

Technical Specifications Table 27: CKM-MR16OUT Technical Specifications Item

Specification

Electrical

Primary Power: 12-24 VDC +/- 10%, 1100 mA maximum 12 VDC at 850 mA nominal 24 VDC at 450 mA nominal

Communication

RS–485, 2-wire, 4,000 feet (twisted pair with shield, Belden 9841)

Inputs

2 dedicated (tamper and power monitor)

Mercury Products Open Platform Solution Product Bulletin

25

Table 27: CKM-MR16OUT Technical Specifications Item

Specification

Outputs

16 relays (Form–C, 5 A at 28 VDC)

Dimensions

6.0 in. W x 8.0 in. L x 1.0 in. H (152 mm W x 203 mm L x 25 mm H)

Temperature

Operational: 0° to 49°C Storage: -55° to 85°C

Humidity

10 to 93% RHNC

Compliance1

United States: UL Listed Subassembly under UL 1076 for Proprietary Burglar Alarm Units and Systems, and under UL 294 for Access Control Systems Units; FCC compliant to the limits for a Class A digital device, pursuant to Part 15 of the FCC rules Canada: cUL Listed Subassembly under ULC/ORD-C1076 Proprietary Burglar Alarm Units and System; Class A digital apparatus, complies with Canadian ICES-003 Europe: CE Mark - Johnson Controls, Inc. declares that this product is in compliance with the EMC Directive  2004/108/EC. Australia and New Zealand: C-Tick Mark, Australia/NZ emissions compliant

1.

CKM-MR16OUT must be installed in CKM enclosure to be UL Listed.

26

Mercury Products Open Platform Solution Product Bulletin

CKM-MR16OUT Architecture Diagram P2000 Workstation

P2000 Server

Wide Area Network IP Network

CKM-EP2500/1501/1502 Controller RS-485

CKM-MR16OUT

16 Relay Outputs

General Purpose Output Support Figure 17: Architecture Diagram of the CKM-MR16OUT Output Module

Ordering Information Table 28: Ordering Information Part Number

Description

CKM-MR16OUT

CKM-MR16OUT Mercury output module

Related Documentation Table 29: Related Documentation Document Title

Document Number

CKM-MR16OUT Mercury Terminal Module Hardware Installation Manual

Part No. 24-10707-82

Mercury Input/Output Interface Modules Catalog Page

LIT-1900835

Mercury Products Open Platform Solution Product Bulletin

27

DM-21 Intrusion Display The DM-21 Mercury intrusion display provides an interactive link to the P2000 Security Management System, enabling system operators to perform various intrusion-related tasks. The DM-21 displays text as sent by the controller, providing alarm status feedback or other freeform messaging or instructions that the system generates. In a P2000 intrusion application, the DM-21 intrusion display allows operators to arm and disarm areas of the facility, and bypass zones, directly from the device. The P2000 software enables administrators to define and manage logical intrusion components (areas and zones). The DM-21 combines a 32-character LCD display and a multi-position keypad. Even in challenging settings, the backlit LCD yields clear information displays. The keypad features standard numerics and four function keys to select display options.The unit connects to the system via a 2-wire RS-485 link or a TTL connection.

Application Notes The DM-21 intrusion display is a core component that provides robust communications functionality within Mercury’s building block approach to system design. When combined with Mercury’s EP series of intelligent access platforms, the unit brings an interactive link and truly integrated functionality to the terminal, a major plus for end-user convenience and satisfaction.

Figure 18: DM-21 Intrusion Display

Benefits •

User-friendly interaction with system

•

Improves overall system ease-of-use

•

For use in a P2000 intrusion application

•

User can perform commands for Intrusion Zones and Intrusion Areas

•

Accessibility to keypad controlled by P2000 Access Groups feature

Features •

16-position backlit keypad

•

32-character LCD

•

Static discharge protected

Technical Specifications Table 30: DM-21 Technical Specifications Item

Specification

Extended User

Prompts user for command

Commands

Echoes back entries Command feedback

Primary Power

12 VDC +/- 15%, 175 mA (not including reader power) Serial Port Port 1: 2-wire RS-485 (twisted pair with shield)

LED

Two wire or one-wire bi-color support

Buzzer

Only with one-wire LED

Keypad

4 x 4, backlit

Display

2 lines, 16 characters/line, backlit 7.5 mm character height typical

28

Mercury Products Open Platform Solution Product Bulletin

Table 30: DM-21 Technical Specifications Item

Specification

Dimensions

6.75 in. W x 5.0 in. L x 1.0 in. D (172 mm W x 127 mm L x 25 mm D)

Temperature

Operational: 0° to 49°C Storage: -20° to 70°C

Humidity

10 to 93% RHNC

Mounting

Surface mount or 3-gang box

Compliance

United States: UL Listed Equipment under UL 1076 for Proprietary Burglar Alarm Units and Systems, and under UL 294 for Access Control Systems Units; FCC compliant to the limits for a Class A digital device, pursuant to Part 15 of the FCC rules Canada: cUL Listed Equipment under ULC/ORD-C1076 Proprietary Burglar Alarm Units and System; Class A digital apparatus, complies with Canadian ICES-003 Europe: CE Mark - Johnson Controls, Inc. declares that this product is in compliance with the EMC Directive  2004/108/EC. Australia and New Zealand: C-Tick Mark, Australia/NZ emissions compliant

Ordering Information Table 31: Ordering Information Part Number

Description

DM-21

DM-21 Mercury Intrusion Display

Related Documentation Table 32: Related Documentation Document Title

Document Number

DM-21 Intrusion Display Hardware Installation Manual

Part No. 24-10707-104

DM-21 Mercury Intrusion Display Catalog Page

LIT-1900836

Mercury Products Open Platform Solution Product Bulletin

29

DM-21 Architecture Diagram P2000 Server

P2000 Workstation

Wide Area Network IP Network CKM-EP1502 CKM-EP2500/1501/1502 Controller RS-485

DM-21

DM-21 DM-21

Figure 19: Architecture Diagram of the DM-21 Intrusion Display

30

Mercury Products Open Platform Solution Product Bulletin

Access Platform CKM-MUX-8 Multiplexer The Access Platform CKM-MUX-8 adds flexibility to convert multiple data lines into a single data line to meet difficult system design and installation challenges. Common uses include star topology, wiring schemes, home-run wiring, or when wiring distances exceed the 4,000-foot limit of the RS-485 standard. The CKM-MUX-8 utilizes bus-arbitration logic on a firstcome, first-serve basis and can detect and deactivate a broken channel to protect the integrity of the communications bus. The CKM-MUX-8 is an 8-port multi-device interface panel that provides the flexibility to take RS-485 or RS232 wiring inputs to create eight 2-wire RS-485 communication channels.

Figure 20: CKM-MUX-8 Multiplexer

Application Notes The CKM-MUX-8 multiplexer accessories add to a developer’s ability to manage divergent system installations.

Features •

Per port voltage isolation

Benefits

•

Universal system compatibilities across intelligent controller families

•

RS-232 or RS-485 inputs accepted

•

Conquer difficult installations

•

Guard against ground loop installation issues

•

Flexibly expand data lines

Mercury Products Open Platform Solution Product Bulletin

31

Technical Specifications Table 33: CKM-MUX-8 Technical Specifications Item

CKM-MUX-8

Primary Power

DC Input: 12 VDC ± 15%, 250 mA

Interfaces

Port 1: RS-232/RS-485, selectable Port 3,5,7,9: RS-485, Transmit/Receive Port 2,4,6,8: RS-485, Transmit/Receive, or Receive Only

Wire Requirement

Power: 1 twisted pair, 18 AWG RS-485: 24 AWG, 4,000 feet (1,200 m) maximum, twisted pairs with shield RS-232: 24 AWG, 50 feet (15 m) maximum

Temperature

Operating: 0° to 49°C Storage: -55° to 85°C

Humidity

10 to 93% RHNC

Dimensions

5 in. L x 6 in. W x 1 in. H (127 mm L x 152 mm W x 25 mm H)

Weight

4 oz (180g) nominal

Compliance1

United States: UL Listed Subassembly under UL 1076 for Proprietary Burglar Alarm Units and Systems, and under UL 294 for Access Control Systems Units; FCC compliant to the limits for a Class A digital device, pursuant to Part 15 of the FCC rules Canada: cUL Listed Subassembly under ULC/ORD-C1076 Proprietary Burglar Alarm Units and System; Class A digital apparatus, complies with Canadian ICES-003 Europe: CE Mark - Johnson Controls, Inc. declares that this product is in compliance with the EMC Directive 2004/108/EC. Australia and New Zealand: C-Tick Mark, Australia/NZ emissions compliant

1.

32

CKM-MUX-8 must be installed in CKM enclosure to be UL Listed.

Mercury Products Open Platform Solution Product Bulletin

CKM-MUX-8 Architecture Diagram P2000 Server

P2000 Workstation

Wide Area Network IP Network

CKM-EP2500/1501/1502 Controller

CKM-MUX-8

CKM-MR52

CKM-MR50

CKM-MR16IN CKM-MR16OUT

Figure 21: Architecture Diagram of the CKM-MUX-8 Multiplexer

Ordering Information Table 34: Ordering Information Part Number

Description

CKM-MUX-8

CKM-MUX-8 Mercury multiplexer

Related Documentation Table 35: Related Documentation Document Title

Document Number

CKM-MUX-8 Mercury Multiplexer Hardware Installation Manual

Part No. 24-10707-90

CKM-MUX-8 Mercury Multiplexer Catalog Page

LIT-1900831

Mercury Products Open Platform Solution Product Bulletin

33

Security Control Panel Assemblies and Enclosures for Mercury Products

Enclosure Features •

High-grade steel design

Security control panel assemblies enable you to order supported Mercury products in a pre-assembled enclosure that includes the right power supply boards and power distribution modules to safely power Mercury components. These enclosures offer a predesigned solution that saves both time and money. Various models are available to accommodate a variety of common applications.

•

Pre-punched to accommodate power supply and accessory boards

•

Standoffs allow field upgrading without removing cabinet from wall

•

Ample 1/2 in. and 1-1/4 in. knockouts

•

Removable door for easier servicing

In addition to pre-assembled panels, these enclosures and accessory boards from LifeSafety Power® are available separately for custom installations.

•

Cabinets have 4.5 in. depth to fit standard 12 VDC 7 Ah batteries. For UL Listed installations, refer to Security Control Panel Assembly Mounted in a  12 in. x 14 in. Enclosure Installation Sheet  (24-10708-36) for compliant battery requirements.

All enclosures come standard with a lock and tamper switch.

Security Control Panel Assembly (12 in. x 14 in. Enclosure) for Mercury Products The 12 in. x 14 in. security control panel is a pre-wired, pre-assembled, standard control panel and enclosure that contains the following:

Enclosure Specifications Table 36: 12 in. x 14 in. Enclosure Specifications Item

Specification

Cabinet Size

12 W x 14 H x 4.5 D inches (31 W x 36 H x 11.4 H cm)

Mercury Mounting Accommodation

CKM-EP1501 and  CKM-MR51E

•

CKM-EP1501 network controller or CKM-MR51E IP reader module CKM-FPO75 75 W power supply

Maximum Boards with Power Supply and Power Distribution Module

2

• •

CKM-F8P Power distribution module

Door Mount Option

No

•

Keyed lock

Weight

•

Tamper switch

11.5 lb (SPE10000-1H00) 11.5 lb (SPH10000-1H00)

Note: For information on the CKM-EP1501 network controller, see Access Platform CKM-EP1501 Controller on page 6. For information on the  CKM-MR51E IP reader module, see Access Platform CKM-MR51E IP Reader Interface Module on page 13.

75-Watt Power Supply The supplied 75-Watt power supply is an offline switch mode power supply battery charger that provides two outputs, user selectable for 12 or 24 VDC. One output provides continuous output power, and the second is programmable to either fail-safe or failsecure lock operation. Table 37: Power Supply Electrical Ratings Item

Specification

Input Voltage

120 or 230 VAC

Input Current

1.6 A

Output Voltage

12 or 24 VDC

Output Current

4.5 or 3 A

Battery Charge Capacity

40 Ah

Efficiency

83%

Output Ripple

120 mVp-p

Figure 22: Mounting Configurations for 12 in. x 14 in. Enclosure 34

Mercury Products Open Platform Solution Product Bulletin

Power Distribution Module

Table 37: Power Supply Electrical Ratings Item

Specification

Line Regulation

0.1 ±%

Load Regulation

2.5 ±%

British Thermal Unit (BTU) Rating

33 BTU/Hr

Continuous Power Outputs

1

Switched Power Outputs

1

The power distribution module adds eight controlled voltage outputs with supervision to the power supply. Each output is programmable to either of the two voltages available when used in a dual voltage power system. Table 38: Power Distribution Module Electrical Ratings

Compliance United States: UL Listed Equipment under UL 1076 for Proprietary Burglar Alarm Units and Systems, and under UL 294 for Access Control Systems Units; FCC compliant to the limits for a Class A digital device, pursuant to Part 15 of the FCC rules Canada: cUL Listed Equipment under ULC/ORDC1076 Proprietary Burglar Alarm Units and System; Class A digital apparatus, complies with Canadian ICES-003

Item

Specification

Input Voltage

12 and/or 24 VDC

Output Voltage

12/24 VDC

Current Output1 (Class 2 Power Ltd)

2.5 A

Power Outputs

8

Supports follow-on modules

Yes

1.

The total current draw from any bus must not exceed the capability of the power supply powering that bus.

Europe: CE Mark - Johnson Controls, Inc. declares that this product is in compliance with the EMC Directive 2004/108/EC and the Low Voltage Directive 2006/95/EEC. Australia and New Zealand: C-Tick Mark, Australia/ NZ emissions compliant

Ordering Information Table 1: Ordering Information Part Number

Description

SPE10000-1H00

12 x 14 x 4.5 in. (31 x 36 x 11.4 cm) security control panel assembly that includes a CKM-EP1501 Mercury network controller, 75 W power supply, power distribution module, keyed lock, and tamper switch

SPH10000-1H00

12 x 14 x 4.5 in. (31 x 36 x 11.4 cm) security control panel assembly that includes a CKM-MR51E Mercury IP reader module, 75 W power supply, power distribution module, keyed lock, and tamper switch

Related Documentation Table 2: Related Documentation Document Title

Document Number

Security Control Panel Assembly Mounted in a 12 in. x 14 in. Enclosure Installation Sheet

Part No. 24-10708-1

CKM-CE75-E1M Enclosure with Power Supply Hardware Installation Manual

Part No. 24-10707-112

CKM-F8P Power Distribution Module Hardware Installation Manual

Part No. 24-10707-147

Security Control Panel Assembly (12 in. x 14 in. Enclosure) for Mercury Products Catalog Page

LIT-1900832

Mercury Products Open Platform Solution Product Bulletin

35

Security Control Panel Assembly (16 in. x 20 in. Enclosure) for Mercury Products

•

Cabinets have 4.5 in. depth to fit standard 12 VDC 7 Ah batteries. For UL Listed installations, refer to Security Control Panel Assembly Mounted in a  16 in. x 20 in. Enclosure Installation Sheet  (24-10708-28) for compliant battery requirements.

The 16 in. x 20 in. security control panel is a pre-wired, pre-assembled, standard control panel and enclosure that contains the following: •

CKM-EP2500 network controller

•

CKM-MR52 reader interface module  (SPF1I100-1I00 only)

•

CKM-FPO75 75 W power supply

•

CKM-F8P Power distribution module

•

Keyed lock

•

Tamper switch

Note: For information on the CKM-EP2500 network controller, see Access Platform CKM-EP2500 Controller on page 3. For information on the CKMMR52 reader interface module, see Access Platform CKM-MR52 on page 19.

Enclosure Specifications Table 39: 16 in. x 20 in. Enclosure Specifications Item

Specification

Cabinet Size

16 W x 20 H x 4.5 D inches (41 W x 51 H x 11.4 D cm)

Mercury Mounting Accommodation

CKM-EP2500,  CKM-EP15011,  CKM-EP1502, CKM-MR50, CKM-MR52, CKM-MR51E1, CKM-MR16IN,  CKM-MR16OUT  and CKM-MUX-8

Maximum Boards with Power Supply and Power Distribution Module

3

Door Mount Option

No

Weight

18.55 lb (SPF10000-1I00) 19.25 lb (SPF1I100-1I00)

1.

SPF10000-1I00 only

75-Watt Power Supply The supplied 75-Watt power supply is an offline switch mode power supply battery charger that provides two outputs, user selectable for 12 or 24 VDC. One output provides continuous output power, and the second is programmable to either fail-safe or failsecure lock operation. Figure 23: Mounting Configurations for 16 in. x 20 in. Enclosure

Table 40: Power Supply Electrical Ratings Item

Specification

Enclosure Features

Input Voltage

120 or 230 VAC

•

High-grade steel design

Input Current

1.6 A

•

Pre-punched to accommodate power supply and accessory boards

Output Voltage

12 or 24 VDC

Output Current

4.5 or 3 A

•

Standoffs allow field upgrading without removing cabinet from wall

Battery Charge Capacity

40 Ah

Efficiency

83%

•

Ample 1/2 in. and 1-1/4 in. knockouts

Output Ripple

120 mVp-p

•

Removable door for easier servicing

Line Regulation

0.1 ±%

Load Regulation

2.5 ±%

BTU Rating

33 BTU/Hr

Continuous Power Outputs

1

Switched Power Outputs

1

36

Mercury Products Open Platform Solution Product Bulletin

Power Distribution Module

Compliance

The power distribution module adds eight controlled voltage outputs with supervision to the power supply. Each output is programmable to either of the two voltages available when used in a dual voltage power system.

United States: UL Listed Equipment under UL 1076 for Proprietary Burglar Alarm Units and Systems, and under UL 294 for Access Control Systems Units; FCC compliant to the limits for a Class A digital device, pursuant to Part 15 of the FCC rules

Table 41: Power Distribution Module Electrical Ratings

Canada: cUL Listed Equipment under ULC/ORDC1076 Proprietary Burglar Alarm Units and System; Class A digital apparatus, complies with Canadian ICES-003

Item

Specification

Input Voltage

12 and/or 24 VDC

Output Voltage

12/24 VDC

Current Output1 (Class 2 Power Ltd)

2.5 A

Power Outputs

8

Supports follow-on modules

Yes

1.

Europe: CE Mark - Johnson Controls, Inc. declares that this product is in compliance with the EMC Directive 2004/108/EC and the Low Voltage Directive 2006/95/EEC. Australia and New Zealand: C-Tick Mark, Australia/ NZ emissions compliant

The total current draw from any bus must not exceed the capability of the power supply powering that bus.

Ordering Information Table 1: Ordering Information Part Number

Description

SPF10000-1I00

16 x 20 x 4.5 in. (41 x 51 x 11.4 cm) security control panel assembly that includes a CKM-EP2500 Mercury network controller, 75 W power supply, power distribution module, keyed lock, and tamper switch

SPF1I100-1I00

16 x 20 x 4.5 in. (41 x 51 x 11.4 cm) security control panel assembly that includes a CKM-EP2500 Mercury network controller, CKM-MR52 reader interface module, 75 W power supply, power distribution module, keyed lock, and tamper switch

Related Documentation Table 2: Related Documentation Document Title

Document Number

Security Control Panel Assembly Mounted in a 16 in. x 20 in. Enclosure Installation Sheet

Part No. 24-10708-28

CKM-CE75-E2M Enclosure with Power Supply Hardware Installation Manual

Part No. 24-10707-120

CKM-F8P Power Distribution Module Hardware Installation Manual

Part No. 24-10707-147

Security Control Panel Assembly (16 in. x 20 in. Enclosure) for Mercury Products Catalog Page

LIT-1900833

Mercury Products Open Platform Solution Product Bulletin

37

Security Control Panel Assembly (20 in. x 24 in. Enclosure) for Mercury Products The 20 in. x 24 in. security control panel is a pre-wired, pre-assembled, standard control panel and enclosure that contains the following:

Enclosure Specifications Table 42: 20 in. x 24 in. Enclosure Specifications Item

Specification

Cabinet Size

20 W x 24 H x 4.5 D inches (51 W x 61 H x 11.4 D cm)

Additional Mercury Mounting Accommodation

CKM-EP1501 or  CKM-MR51E 5

•

CKM-EP2500 network controller

•

Three CKM-MR52 reader interface modules

•

CKM-FPO150 150 W power supply

•

CKM-F8P Power distribution module

Maximum Boards with Power Supply and Power Distribution Module

•

Keyed lock

Door Mount Option

No

•

Tamper switch

Weight

33.2 lb (SPF1I300-1J00)

Note: For information on the CKM-EP2500 network controller, see Access Platform CKM-EP2500 Controller on page 3. For information on the  CKM-MR52 reader interface module, see Access Platform CKM-MR52 on page 19.

150-Watt Power Supply The supplied 150-Watt power supply is an offline switch mode power supply battery charger that provides two outputs, user selectable for 12 or 24 VDC. One output provides continuous output power, and the second is programmable to either fail-safe or failsecure lock operation. Table 43: Power Supply Electrical Ratings Item

Specification

Input Voltage

120 or 230 VAC

Input Current

2.5 A

Output Voltage

12 or 24 VDC

Output Current

12 or 6 A

Battery Charge Capacity

80 Ah

Efficiency

87%

Output Ripple

120 mVp-p

Line Regulation

0.1 ±%

Figure 24: Mounting Configuration for 20 in. x 24 in. Enclosure

Load Regulation

2 ±%

BTU Rating

66 BTU/Hr

Enclosure Features

Continuous Power Outputs

1

•

High-grade steel design

Switched Power Outputs

1

•

Pre-punched to accommodate power supply and accessory boards

•

Rear standoffs allow field upgrading without removing cabinet from wall

•

Ample 1/2 in. and 1-1/4 in. knockouts

•

Removable door for easier servicing

•

Cabinets have 4.5 in. depth to fit standard 12 VDC 7 Ah batteries. For UL Listed installations, refer to Security Control Panel Assembly Mounted in a  20 in. x 24 in. Enclosure Installation Sheet  (24-10708-36) for compliant battery requirements.

38

Mercury Products Open Platform Solution Product Bulletin

Power Distribution Module

Compliance

The power distribution module adds eight controlled voltage outputs with supervision to the power supply. Each output is programmable to either of the two voltages available when used in a dual voltage power system.

United States: UL Listed Equipment under UL 1076 for Proprietary Burglar Alarm Units and Systems, and under UL 294 for Access Control Systems Units; FCC compliant to the limits for a Class A digital device, pursuant to Part 15 of the FCC rules

Table 44: Power Distribution Module Electrical Ratings

Canada: cUL Listed Equipment under ULC/ORDC1076 Proprietary Burglar Alarm Units and System; Class A digital apparatus, complies with Canadian ICES-003

Item

Specification

Input Voltage

12 and/or 24 VDC

Output Voltage Output Current (Class 2 Power Ltd)

2.5 A

Power Outputs

8

Supports follow-on modules

Yes

1.

Europe: CE Mark - Johnson Controls, Inc. declares that this product is in compliance with the EMC Directive 2004/108/EC and the Low Voltage Directive 2006/95/EEC.

12/24 VDC 1

Australia and New Zealand: C-Tick Mark, Australia/ NZ emissions compliant

The total current draw from any bus must not exceed the capability of the power supply powering that bus.

Ordering Information Table 45: Ordering Information Part Number

Description

SPF1I300-1J00

20 x 24 x 4.5 in. (51 x 61 x 11.4 cm) security control panel assembly that includes a CKM-EP2500 Mercury network controller, three CKM-MR52 reader interface modules, 150 W power supply, power distribution module, keyed lock, and tamper switch

Related Documentation Table 46: Related Documentation Document Title

Document Number

Security Control Panel Assembly Mounted in a 20 in. x 24 in. Enclosure Installation Sheet

Part No. 24-10708-36

CKM-CE150-E4M Enclosure with Power Supply Hardware Installation Manual

Part No. 24-10707-139

CKM-F8P Power Distribution Module Hardware Installation Manual

Part No. 24-10707-147

Security Control Panel Assembly (20 in. x 24 in. Enclosure) for Mercury Products Catalog Page

LIT-1900834

Mercury Products Open Platform Solution Product Bulletin

39

Security Enclosures for Mercury Products

•

CKM-FPO75 75 W power supply

Johnson Controls has added three enclosures for use with Authentic Mercury hardware. These high-quality steel enclosures are designed for the form factors of Mercury products and include a power supply, keyed lock, and tamper switch.

•

Keyed lock and tamper switch

•

Cabinets have 4.5 in. depth to fit standard 12 VDC 7 Ah batteries. For UL Listed installations, refer to CKM-CE75-E1M Enclosure with Power Supply Hardware Installation Manual (24-10707-112) for compliant battery requirements.

Authentic Mercury components require power inputs to be Class 2 power limited. This can be provided by using the CKM-F8P power distribution module. For more information on the CKM-F8P, refer to the Security Enclosure Accessories for Mercury Products Catalog Page (LIT-1900912).

CKM-CE75-E1M 12 in. x 14 in. Enclosure •

High-grade steel design with ample 1/2 in.  and 1-1/4 in. knockouts

•

Pre-punched to accommodate power supply and accessory boards

•

Standoffs allow field upgrading without removing cabinet from wall

•

Removable door for easier servicing

Figure 25: CKM-CE75-E1M 12 in. x 14 in. Enclosure

Enclosure Specifications

Table 47: 12 in. x 14 in. Enclosure Specifications Item

Specification

Cabinet Size

12 W x 14 H x 4.5 D inches (31 W x 36 H x 11.4 H cm)

Mercury Mounting Accommodation

CKM-EP1501, CKM-MR50 and CKM-MR51E

Maximum Boards with Power Supply

3

Door Mount Option

No

Weight

7.7 lb

Compliance

United States:  UL Listed Subassembly under UL 1076 for Proprietary Burglar Alarm Units and Systems, and under UL 294 for Access Control Systems Units; FCC compliant to the limits for a Class A digital device, pursuant to Part 15 of the FCC rules Canada:  cUL Listed Subassembly under ULC/ORD-C1076 Proprietary Burglar Alarm Units and System; Class A digital apparatus, complies with Canadian ICES-003 Europe:  CE Mark - Johnson Controls, Inc., declares that this product is in compliance with the EMC Directive 2004/108/EC and the Low Voltage Directive 2006/95/EEC. Australia and New Zealand:  C-Tick Mark, Australia/NZ emissions compliant

40

Mercury Products Open Platform Solution Product Bulletin

CKM-CE75-E2M 16 in. x 20 in. Enclosure •

High-grade steel design with ample 1/2 in.  and 1-1/4 in. knockouts

•

Pre-punched to accommodate power supply and accessory boards

•

Standoffs allow field upgrading without removing cabinet from wall

•

Removable door for easier servicing

•

CKM-FPO75 75 W power supply

•

Keyed lock and tamper switch

•

Cabinets have 4.5 in. depth to fit standard 12 VDC 7 Ah batteries. For UL Listed installations, refer to CKM-CE75-E2M Enclosure with Power Supply Hardware Installation Manual (24-10707-120) for compliant battery requirements.

Figure 26: CKM-CE75-E2M 16 in. x 20 in. Enclosure

Enclosure Specifications

Table 48: 16 in. x 20 in. Enclosure Specifications Item

Specification

Cabinet Size

16 W x 20 H x 4.5 D inches (41 W x 51 H x 11.4 D cm)

Mercury Mounting Accommodation

CKM-EP2500, CKM-EP1501, CKM-EP1502, CKM-MR50, CKM-MR52, CKM-MR51E, CKM-MR16IN, CKM-MR16OUT, and CKM-MUX-8

Maximum Boards with Power Supply

3

Door Mount Option

No

Weight

18 lb

Compliance

United States:  UL Listed Subassembly under UL 1076 for Proprietary Burglar Alarm Units and Systems, and under UL 294 for Access Control Systems Units; FCC compliant to the limits for a Class A digital device, pursuant to Part 15 of the FCC rules Canada:  cUL Listed Subassembly under ULC/ORD-C1076 Proprietary Burglar Alarm Units and System; Class A digital apparatus, complies with Canadian ICES-003 Europe:  CE Mark - Johnson Controls, Inc., declares that this product is in compliance with the EMC Directive 2004/108/EC and the Low Voltage Directive 2006/95/EEC. Australia and New Zealand:  C-Tick Mark, Australia/NZ emissions compliant

Mercury Products Open Platform Solution Product Bulletin

41

CKM-CE150-E4M 20 in. x 24 in. Enclosure •

High-grade steel design with ample 1/2 in.  and 1-1/4 in. knockouts

•

Pre-punched to accommodate power supply and accessory boards

•

Standoffs allow field upgrading without removing cabinet from wall

•

Removable door for easier servicing

•

CKM-FPO150 150 W power supply

•

Keyed lock and tamper switch

•

Cabinets have 4.5 in. depth to fit standard 12 VDC 7 Ah batteries. For UL Listed installations, refer to CKM-CE150-E4M Enclosure with Power Supply Hardware Installation Manual (24-10707-139) for compliant battery requirements.

Figure 27: CKM-CE150-E4M 20 in. x 24 in. Enclosure

Enclosure Specifications Table 49: 20 in. x 24 in. Enclosure Specifications Item

Specification

Cabinet Size

20 W x 24 H x 4.5 D inches (51 W x 61 H x 11.4 D cm)

Additional Mercury Mounting Accommodation

CKM-EP2500, CKM-EP1501, CKM-EP1502, CKM-MR50, CKM-MR52, CKM-MR51E, CKM-MR16IN, CKM-MR16OUT, and CKM-MUX-8

Maximum Boards with Power Supply

8

Door Mount Option

No

Weight

22 lb

Compliance

United States:  UL Listed Subassembly under UL 1076 for Proprietary Burglar Alarm Units and Systems, and under UL 294 for Access Control Systems Units; FCC compliant to the limits for a Class A digital device, pursuant to Part 15 of the FCC rules Canada:  cUL Listed Subassembly under ULC/ORD-C1076 Proprietary Burglar Alarm Units and System; Class A digital apparatus, complies with Canadian ICES-003 Europe:  CE Mark - Johnson Controls, Inc., declares that this product is in compliance with the EMC Directive 2004/108/EC and the Low Voltage Directive 2006/95/EEC. Australia and New Zealand:  C-Tick Mark, Australia/NZ emissions compliant

42

Mercury Products Open Platform Solution Product Bulletin

Ordering Information Table 50: Ordering Information Part Number

Description

CKM-CE75-E1M

12 x 14 x 4.5 in. (31 x 36 x 11.4 cm) enclosure with 75 W power supply board, keyed lock,  and tamper switch

CKM-CE75-E2M

16 x 20 x 4.5 in. (41 x 51 x 11.4 cm) enclosure with 75 W power supply board, keyed lock,  and tamper switch

CKM-CE150-E4M

20 x 24 x 4.5 in. (51 x 61 x 11.4 cm) enclosure with 150 W power supply board, keyed lock,  and tamper switch

Related Documentation Table 51: Related Documentation Document Title

Document Number

CKM-CE75-E1M Enclosure with Power Supply Hardware Installation Manual

Part No. 24-10707-112

CKM-CE75-E2M Enclosure with Power Supply Hardware Installation Manual

Part No. 24-10707-120

CKM-CE150-E4M Enclosure with Power Supply Hardware Installation Manual

Part No. 24-10707-139

Mercury Products Open Platform Solution Product Bulletin

43

Security Enclosure Accessories for Mercury Products In addition to pre-configured panels and enclosures for the Authentic Mercury components, Johnson Controls has added the following power components. These devices allow for a customized installation when used with Authentic Mercury components and CKM enclosures from LifeSafety Power®.

CKM-FPO150 150-Watt Power Supply The CKM-FPO150 150-Watt power supply is an offline switch mode power supply battery charger that provides two outputs, user selectable for 12 or 24 VDC. One output provides continuous output power, and the second is programmable to either fail-safe or  fail-secure lock operation.

Figure 28: CKM-FPO150 150-Watt Power Supply

Technical Specifications Table 52: CKM-FPO150 Technical Specifications Item

Specification

Input Voltage

120 or 230 VAC

Input Current

2.5 A

Output Voltage

12 or 24 VDC

Output Current

12 or 6 A

Battery Charge Capacity

80 Ah

Efficiency

87%

Output Ripple

120 mVp-p

Line Regulation

0.1 ±%

Load Regulation

2 ±%

BTU Rating

66 BTU/Hr

Continuous Power Outputs

1

Switched Power Outputs

1

1

Compliance

1.

44

United States: UL 294; UL 603; UL 864; UL 1076; UL 1481; UL 2044; UL 2572; FCC Part 15, Subpart B; CSFM Approved Canada: ULC S318; ULC S319; ULC S527; CSA C22.2 #107.1; CSA 22.2 #60950

Product listed as FPO150 by LifeSafety Power Inc.

Mercury Products Open Platform Solution Product Bulletin

CKM-FPO75 75-Watt Power Supply The CKM-FPO75 75-Watt power supply is an offline switch mode power supply battery charger that provides two outputs, user selectable for 12 or 24 VDC. One output provides continuous output power, and the second is programmable to either fail-safe or  fail-secure lock operation.

Figure 29: CKM-FPO75 75-Watt Power Supply Technical Specifications Table 53: CKM-FPO75 Technical Specifications Item

Specification

Input Voltage

120 or 230 VAC

Input Current

1.6 A

Output Voltage

12 or 24 VDC

Output Current

4.5 or 3 A

Battery Charge Capacity

40 Ah

Efficiency

83%

Output Ripple

120 mVp-p

Line Regulation

0.1 ±%

Load Regulation

2.5 ±%

British Thermal Unit (BTU) Rating

33 BTU/Hr

Continuous Power Outputs

1

Switched Power Outputs

1

Compliance1

United States: UL 294; UL 603; UL 864; UL 1076; UL 1481; UL 2044; UL 2572; FCC Part 15, Subpart B; CSFM Approved Canada: ULC S318; ULC S319; ULC S527; CSA C22.2 #107.1; CSA 22.2 #60950

1.

Product listed as FPO75 by LifeSafety Power Inc.

Mercury Products Open Platform Solution Product Bulletin

45

CKM-F8P Power Distribution Module The power distribution module adds eight controlled voltage outputs with supervision to the power supply. Each output is programmable to either of the two voltages available when used in a dual voltage power system. Authentic Mercury components require power inputs to be Class 2 power limited. This can be provided by using the CKM-F8P power distribution module. Technical Specifications

Figure 30: CKM-F8P Power Distribution Module

Table 54: CKM-F8P Technical Specifications Item

Specification

Input Voltage

12 and/or 24 VDC

Output Voltage

12/24 VDC

Output Current1 (Class 2 Power

2.5 A

Power Outputs

8

Supports follow-on modules

Yes

Compliance2

United States: UL 294; UL 603; UL 864; UL 1076; UL 1481; UL 2044; UL 2572; FCC Part 15, Subpart B; CSFM Approved Canada: ULC S318; ULC S319; ULC S527; CSA C22.2 #107.1; CSA 22.2 #60950

Ltd)

1. 2.

46

The total current draw from any bus must not exceed the capability of the power supply powering that bus. Product listed as F8P by LifeSafety Power Inc.

Mercury Products Open Platform Solution Product Bulletin

Ordering Information Table 55: Ordering Information Part Number

Description

CKM-FPO150

150 W power supply board; 12 A at 24 VDC and 12 A at 12 VDC

CKM-FPO75

75 W power supply board; 3 A at 24 VDC and 4.5 A at 12 VDC

CKM-F8P

Power distribution module with eight controlled voltage outputs with supervision to the power supply

Related Documentation Table 56: Related Documentation Document Title

Document Number

Security Control Panel Assembly Mounted in a 12 in. x 14 in. Enclosure Installation Sheet

Part No. 24-10708-1

Security Control Panel Assembly Mounted in a 16 in. x 20 in. Enclosure Installation Sheet

Part No. 24-10708-28

Security Control Panel Assembly Mounted in a 20 in. x 24 in. Enclosure Installation Sheet

Part No. 24-10708-36

CKM-CE75-E1M Enclosure with Power Supply Hardware Installation Manual

Part No. 24-10707-112

CKM-CE75-E2M Enclosure with Power Supply Hardware Installation Manual

Part No. 24-10707-120

CKM-CE150-E4M Enclosure with Power Supply Hardware Installation Manual

Part No. 24-10707-139

CKM-F8P Power Distribution Module Hardware Installation Manual

Part No. 24-10707-147

Building Efficiency 507 E. Michigan Street, Milwaukee, WI 53202 Metasys® and Johnson Controls® are registered trademarks of Johnson Controls, Inc. All other marks herein are the marks of their respective owners. © 2014 Johnson Controls, Inc.

Mercury Products Open Platform Solution Product Bulletin Published in U.S.A.

47

www.johnsoncontrols.com