Listing Constructional Data Report (CDR)

1.0 Reference and Address Report Number GZ12090944-1

Standard(s)

Original Issued: 19-Nov-2012

Electric Household Cooking and Food Serving Appliances - UL1026, Issued: Jan. 27, 2012, 6th Edition, Rev. May 29, 2014 Portable Electrical Motor-Operated and Heating Appliances: Particular Requirements for Portable Electric Cooking Appliances - CSA C22.2 No. 1335.2.9, Issued: Jan. 1, 1993, R2013 (See also CSA C22.2 No. 1335.1, Issued: Jan. 1, 1993, 1st Edition, R2013)

Applicant

Spectrum Brands Inc

Address

3001 Deming Way, Middleton WI 53562-1431, USA

Country Contact Phone FAX Email

Revised: 17-Nov-2015

USA Ms. Lilian Ip / Ms. He Hui 86-755-8621 7260 86-755-8621 7301 [email protected] / [email protected]

Manufacturer

Guangdong Galanz Microware Electrical Appliances Manufacturing Co, Ltd

Address

No. 3, Xingpu Road East, Huangpu Town, ZHONGSHAN CITY, Guangdong, CHINA

Country Contact Phone FAX

China Tina Fang 86-760-2330 5919 86-760-2330 5504

Email

[email protected]

Page 1 of 34

Report No. GZ12090944-1 Spectrum Brands Inc

Page 2 of 34

Issued: 19-Nov-2012 Revised: 17-Nov-2015

2.0 Product Description Product Brand name

Toaster Oven BLACK & DECKER or BLACK + DECKER or APPLICA CONSUMER PRODUCTS, INC.

Description

The products covered by this report are toaster ovens, rated 120V, 60Hz, for household and indoor use only, provided with a non-detachable flexible power supply cord terminated in a 3wire grounding plug.

Models

TO1322****, TO1332****, TO1373****, TO1303**** and TO1313****, TO1356****, where '*' be 0-9, A-Z or blank.

All models are identical except the Door Handle and Knobs and the following: TO1322****, TO1332**** are two knobs construction. TO1356****, TO1373****, TO1303**** and TO1313**** are three knobs construction. Model Similarity TO1322****, TO1332****, TO1303**** and TO1313**** share the same construction of Panel and Glass Door. Suffix '****' is referring for aesthetics (such as color, etc...) or other commercial purpose. Ratings Other Ratings

120V, 60Hz,1150W NA

ED 16.3.15 (1-Jan-13) Mandatory

Report No. GZ12090944-1 Spectrum Brands Inc

Issued: 19-Nov-2012 Revised: 17-Nov-2015

Page 3 of 34

3.0 Product Photographs Photo 1 - External View of Model TO1322****

Photo 2 - External View of Model TO1332 TO1332**** 5

2

4

1 3

ED 16.3.15 (1-Jan-13) Mandatory

Report No. GZ12090944-1 Spectrum Brands Inc

Page 4 of 34

Issued: 19-Nov-2012 Revised: 17-Nov-2015

3.0 Product Photographs Photo 3 - External View of Model TO1373****

Photo 4 - External View of Model TO1303****

ED 16.3.15 (1-Jan-13) Mandatory

Report No. GZ12090944-1 Spectrum Brands Inc

Page 5 of 34

Issued: 19-Nov-2012 Revised: 17-Nov-2015

3.0 Product Photographs Photo 4A - External View of Model TO1356****

Photo 5 - External View of Model TO1313****

Photo 6 - Internal View of Model MC21B##--LR

ED 16.3.15 (1-Jan-13) Mandatory

Report No. GZ12090944-1 Spectrum Brands Inc

Issued: 19-Nov-2012 Revised: 17-Nov-2015

Page 6 of 34

3.0 Product Photographs Photo 6 - External View of all models

6

7

Photo 7 - External View of all models 8 24

ED 16.3.15 (1-Jan-13) Mandatory

Report No. GZ12090944-1 Spectrum Brands Inc

Issued: 19-Nov-2012 Revised: 17-Nov-2015

Page 7 of 34

3.0 Product Photographs Photo 8 - Internal View of Model TO1322****

11

9

12

10

Photo 9 - Internal View of Model TO1322**** 13

14 18

17

15

16

ED 16.3.15 (1-Jan-13) Mandatory

Report No. GZ12090944-1 Spectrum Brands Inc

Page 8 of 34

Issued: 19-Nov-2012 Revised: 17-Nov-2015

3.0 Product Photographs Photo 10 - Internal View of Model TO1373****

Photo 11 - Internal View of Model TO1373****

the cover base is optionally provided for TO1303****, TO1313****, TO1373****

ED 16.3.15 (1-Jan-13) Mandatory

Report No. GZ12090944-1 Spectrum Brands Inc

Issued: 19-Nov-2012 Revised: 17-Nov-2015

Page 9 of 34

3.0 Product Photographs Photo 12 - Internal View of Model TO1373****

the fiberglass sleeving for the blue wire is optionally provided

19

Remark: when the fiberglass sleeving for the blue wire is not provided, the metal surfaces upon which the blue wire may bear shall be smooth, well-rounded to prevent abrasion. Photo 13 - Internal View of all models

21

20

22

ED 16.3.15 (1-Jan-13) Mandatory

Report No. GZ12090944-1 Spectrum Brands Inc

Issued: 19-Nov-2012 Revised: 17-Nov-2015

Page 10 of 34

3.0 Product Photographs Photo 14 - View of Accessory

23

Photo 15 - External View of Model TO1332**** with alternative handle

ED 16.3.15 (1-Jan-13) Mandatory

Report No. GZ12090944-1 Spectrum Brands Inc

Page 11 of 34

Issued: 19-Nov-2012 Revised: 17-Nov-2015

3.0 Product Photographs Photo 16 - View of alternative construction for all models

Remark: change the sleeving from door spring to lower heater terminal

Photo 17 - View of alternative construction for all models

Remark: add a cable tie for power cord and internal wires

ED 16.3.15 (1-Jan-13) Mandatory

Report No. GZ12090944-1 Spectrum Brands Inc

Page 12 of 34

Issued: 19-Nov-2012 Revised: 17-Nov-2015

3.0 Product Photographs Photo 18 - View of alternative Handle and Knob construction for model TO1313****

ED 16.3.15 (1-Jan-13) Mandatory

Report No. GZ12090944-1 Spectrum Brands Inc

Page 13 of 34

Issued: 19-Nov-2012 Revised: 17-Nov-2015

4.0 Critical Components Photo #

Item Name no.1

Manufacturer/ trademark 2

Type / model2

2

1

Power Supply Cord Set

Various

HPN

2

2

Panel

Various

Various

2

3

Glass Door Assembly

Various

Various

2

3a Door Handle

2

3b

2

2

2

Upper & Lower Door Clamp

3c Glass Door

4

5

Knobs

Top Enclosure

6

6

Spacer

6

7

Cord Bushing

7

8

Foot

Various

Various

Various

Various

Various

Various

Various

18AWG/3C, rated 300V, 105℃, VW-1, the cord length from cord entry to plug face should be between 0.6m and 2.1m, flexible cord integrally molded on a 3-wire grounding plug type 5-15P. SPCD or SUS430 material. Measured 0.5mm or 0.4mm thick. Overall dimension 390mm x 184mm x 22mm. It consists of the following items: PBT or PA6 material. Rated at least HB, min. 1.0mm thick. Secured with Door Clamp by screws. SPCC material. Measured 0.6mm or 0.5mm thick.

Mark(s) of conformity 3

cULus

NR

NR

cURus

NR

Various

Toughened glass. Measured the thickness 4mm, overall dimension 284mm x 162.7mm for TO1373***, and 284mm x 149mm for TO1322***, TO1332***, TO1303***, TO1313***.

NR

Various

PBT or PA6 material. Rated at least HB, min. 2.0mm thick. Tightly snapped at stem of Thermostat or Timer or Functionselect Switch.

cURus

Various

SPCC or SUS430 material. Measured 0.4mm thick. Measured overall dimension 393mm(L) x 234mm(W) x 185.5mm(H). Fixed on the back enclosure and bottom enclosure by screws.

NR

CHEVRON PHILLIPS BR111 CHEMICAL CO L P KAI SUH SUH ENTERPRISE CO SR-F51 LTD

Various

Technical data and securement means

Various

PPS material. Rated V-0, 220℃. Min. 1.5mm thick, measured 15.3mm O.D x 12mm long, fixed to black enclosure by riveting. Rated 75℃. Snapped into black enclosure tightly and serviced as strain relief. PP material. Rated at least HB, Min. 115℃. Min. 2mm thick. Four provided, measured 45mm (L) x 18mm (W) x 25mm (H). With four rubber mats snapped in it, secured on bottom enclosure by screws.

URus

URus

cURus

ED 16.3.15 (1-Jan-13) Mandatory

Report No. GZ12090944-1 Spectrum Brands Inc

Page 14 of 34

Issued: 19-Nov-2012 Revised: 17-Nov-2015

4.0 Critical Components Photo #

8

Item Name no.1

9

Metal Chamber

Close-end Connector

8

10

8

11 Cable Tie

Manufacturer/ trademark 2

Type / model2

Technical data and securement means Galvanized steel. 0.4mm thick, it consists of back enclosure, bottom enclosure and U inner plate, fixed together with each other by screws. Measured overall dimensions of 274mm(L) x 225mm(W) x 175mm(H). SPCC material. 0.35mm thick. Rated min. 300V, 105℃. For wiring connection between power supply cord and internal wire.

Various

Various

Various

Various

Various

Various

Various

PA material. Rated at least 105℃.

cURus

cURus

8

12 Internal Wire

Various

3122

9

13

Indicator Assembly

Various

Various

It consists of the following items:

FORMOSA IDEMITSU #2200+(f2) PETROCHEMICA L CORP 13a Indicator Cover MITSUBISHI ENGINEERING- 7022(l) PLASTICS CORP

9

13b

Fiberglass Sleeving

Various

Various

9

13c

Heat Shrinkable Tube

Various

Various

Cover Base (optional)

LG CHEM LTD

H1315

Function-select Switch

FOSHAN CITY CHANCHENG HUALILAI FZ31-9 ELECTRICAL CO LTD. FOSHAN SHUNDE XINGTAN YUANFENG YX1 HARDWARE ELECTRICAL APPLIANCES CO LTD

11 13d

9

14

3

Various

Rated 200℃, 300V. Min. 18 AWG for the connecting to Timer, Power Supply Cord, and the connection between Thermostat and Function-select Switch. Min. 22 AWG for the connecting to Indicator Light. Min. 20 AWG for the others international connection.

9

Mark(s) of conformity

PC material. Rated V-2, HWI=3, HAI=0, 125℃, minimum 1.5 mm thick. Secured on the control panel. Only for TO1322***, TO1332***. PC material. Rated V-2, HWI=2, HAI=0, 115℃, minimum 1.5 mm thick. Secured on the control panel. Enclosed the indicator leads and a resistor covered by Heat Shrinkable Tube. Rated 125℃, 600V, VW-1. Employed to cover indicator leads and a resistor. Only for TO1303***, TO1313***, TO1373***. PP, rated HB, 110℃, minimum 1.5 mm thick. Fixed with the Indicator cover.

NR

NR cURus

NR

cURus

cURus

cURus

cURus

cURus

Rated 125V, 60Hz, 13A, 125℃, endurance 6K cycles. Secured on the control panel by screws.

cURus

Rated 125 V, 50/60 Hz, 20 A, 125 ℃. 6000 cycles endurance. Others same as above.

cURus

ED 16.3.15 (1-Jan-13) Mandatory

Report No. GZ12090944-1 Spectrum Brands Inc

Page 15 of 34

Issued: 19-Nov-2012 Revised: 17-Nov-2015

4.0 Critical Components Photo #

9

9

Item Name no.1

Manufacturer/ trademark 2

Type / model2

LINTON ELECTRICAL LTD

IT-168

SHENZHEN FOREVER GREAT TECHNOLOGY CO LTD

XWX-WK-03

15 Thermostat

16 Timer

HANGZHOU WESTLAKE TIMER SWITCH FACTORY. JIANGSU SHALONG MECHANICAL & ELECTRICAL TECHNOLOGY CO LTD HANGZHOU TIANMA TIMECONTROL SITECH CO LTD HANGZHOU GUANZUAN ELECTRICAL APPLIANCE CO LTD

DKJ/1-30

cURus

cURus

DKJ-Y-30

Rated 125V, 15A, 120℃, others same as above.

cURus

DKJ/1-1 thru 240

Rated 125V, 15A, 125℃, others same as above.

cURus

9

18 Quick Connector

SHUN SHENG TERMINAL MFG LTD

751A-BS

12

19 Spring

Various

Various

13

20

Quartz Protecting Various Cover

Various

GALANZ

cURus

cURus

17 Terminal Sheath

Upper Quartz Element

3

Rated 120V, 15A, 120℃, others same as above.

9

21

Rated 125V, 60Hz, 12A, maximum operating temperature 176℃ for TO1322*** and TO1332***, 192℃ for TO1373***, 181℃ for TO1303*** and TO1313***, subjected to 100,000 cycles endurance test. Rated 125V, 60Hz, 15A, maximum operating temperature 176℃ for TO1322*** and TO1332***, 192℃ for TO1373***, 181℃ for TO1303*** and TO1313***, subjected to 100,000 cycles endurance test. Rated 125V, 15A, 120℃, endurance 6K cycles, maximum time setting 30 minutes. Secured on the control panel by screws.

Mark(s) of conformity

SL-30B

WYNCA TINYO SILICONE CO LTD

13

Technical data and securement means

TY26E9

GA (red marking 600W output)

SIR. White color, rated V-0, 150 ℃. Two provided for enclosing Quick Connector to Functionselect Switch. Five provided. For the connection to terminals of Thermostat and Function-select Switch. 65Mn. Measured Ø0.9mm for the wire. Measured overall 32mm long for the idle stage and 8mm outer diameter. Two provided. SA1C material. 0.4mm or 0.35mm thick. Rated 120Vac, 60Hz, 600W. It consists of resistance wire, 0.75 mm diameter, resistance 21.2~23.4 Ω, encased in a 1mm thick quartz glass sheath, overall 8~9mm OD. Supported by two Ceramic Insulating Terminal. Refer to Illustration no.4 for detail.

cURus

URus

NR

NR

NR

ED 16.3.15 (1-Jan-13) Mandatory

Report No. GZ12090944-1 Spectrum Brands Inc

Page 16 of 34

Issued: 19-Nov-2012 Revised: 17-Nov-2015

4.0 Critical Components Photo #

Item Name no.1

Lower Quartz Element

Manufacturer/ trademark 2

Type / model2

GALANZ

Rated 120Vac, 60Hz, 550W. It consists of resistance wire, 0.65~0.7mm diameter, resistance GA (blue 25.1~27.3Ω, encased in a 1mm marking 550 W thick quartz glass sheath, overall output) 7.5~8.5mm OD. Supported by two Ceramic Insulating Terminal. Refer to Illustration no.4 for detail.

13

22

14

23 Attachments

Various

Various

7

24 Marking Label

Various

Various

Technical data and securement means

It consisted of a Crumb Tray, a Food Tray, and a Wire Rack. Painting, silk screen, engrave, laser or molding on the outer surface of Bottom Enclosure. Refer to Illustration 1 for details.

Mark(s) of conformity 3

NR

NR

cURus

NOTES: 1) Not all item numbers are indicated (called out) in the photos, as their location is obvious. 2) “Various“ means any type, from any manufacturer that complies with the "Technical data and securement means" and meets the "Mark(s) of conformity" can be used. 3) Indicates specific marks to be verified, which assures the agreed level of surveillance for the component. "NR" - indicates Unlisted and only visual examination is necessary. "See 5.0" indicates Unlisted components or assemblies to be evaluated periodically refer to section 5.0 for details.

ED 16.3.15 (1-Jan-13) Mandatory

Report No. GZ12090944-1 Spectrum Brands Inc

Page 17 of 34

Issued: 19-Nov-2012 Revised: 17-Nov-2015

5.0 Critical Unlisted CEC Components No CEC Unlisted Components are used in this report.

ED 16.3.15 (1-Jan-13) Mandatory

Report No. GZ12090944-1 Spectrum Brands Inc

Page 18 of 34

Issued: 19-Nov-2012 Revised: 17-Nov-2015

6.0 Critical Features Recognized Component - A component part, which has been previously evaluated by an accredited certification body with restrictions and must be evaluated as part of the basic product considering the restrictions as specified by the Conditions of Acceptability. Listed Component - A component part, which has been previously Listed or Certified by an accredited Certification Organization with no restrictions and is used in the intended application within its ratings. Unlisted Component - A part that has not been previously evaluated to the appropriate designated component standard. It may also be a Listed or Recognized component that is being used outside of its evaluated Listing or component recognition. Critical Features/Components - An essential part, material, subassembly, system, software, or accessory of a product that has a direct bearing on the product’s conformance to applicable requirements of the product standard. Construction Details - For specific construction details, reference should be made to the photographs and descriptions. All dimensions are approximate unless specified as exact or within a tolerance. In addition to the specific construction details described in this Report, the following general requirements also apply. 1. Spacing - In primary circuits, min. 1.6 mm spacing is maintained through air or over surfaces of insulating material between current-carrying parts of opposite polarity and between bare live parts and other npncurrent-carring conductive parts other than the enclosure, and minimum 1.6 mm spacing between currentcarrying parts and conductive enclosure. 2. Mechanical Assembly - Components such as switches, fuseholders, connectors, wiring terminals and display lamps are mounted and prevented from shifting or rotating by the use of lockwashers, starwashers, or other mounting format that prevents turning of the component. 3. Corrosion Protection - All ferrous metal parts are protected against corrosion by painting, plating or the equivalent. 4. Accessibility of Live Parts - All uninsulated live parts in primary circuitry are housed within a metal or nonmetallic enclosure constructed with no openings other than those specifically described in Sections 4 and 5. 5. Grounding - All exposed dead-metal parts and all dead-metal parts within the enclosure that are exposed are connected to the grounding lead of the power supply cord . 6. Internal Wiring - Internal wiring is routed away from sharp or moving parts. Internal wiring leads terminating in soldered connections are made mechanically secure prior to soldering. Recognized Component separable (quick disconnect) connectors of the positive detent type, closed loop connectors, or other types specifically described in the text of this report are also acceptable as internal wiring terminals. At points where internal wiring passes through metal walls or partitions, the wiring insulation is protected against abrasion or damage by plastic bushings or grommets. 7. Markings - The product is marked as follows: - manufacturer’s name, trade name - model number - date of manufacture - electrical ratings (volts, power & frequency) - refer to Illustration 1 - Marking for details. 8. Carton Marking - The following are required: -The “HOUSEHOLD USE ONLY” or “HOUSEHOLD TYPE” must be located on at least one outside surface. -Appear in lettering not less than the height as specified, The dimension of the carton panel (mm) Minimum height of lettering (mm) 0~152 3.2 152~254 4.8 more than 254 6.4 9. Cautionary Markings - The following are required: - Refer to illustration 1 for details.

ED 16.3.15 (1-Jan-13) Mandatory

Report No. GZ12090944-1 Spectrum Brands Inc

Page 19 of 34

Issued: 19-Nov-2012 Revised: 17-Nov-2015

6.0 Critical Features 10. Installation, Operating and Safety Instructions - Instructions for installation and use of this product are provided by the manufacturer. - The “IMPORTANT SAFEGUARDS” and “SAVE THESE INSTRUCTIONS” was min. 4.8 mm in height. - The letter of contents was: for upper case letter, 2.11 mm high min., for lower case letter, 1.6 mm in height min. - Refer to Instruction illustration 2 for details

ED 16.3.15 (1-Jan-13) Mandatory

Report No. GZ12090944-1 Spectrum Brands Inc

Issued: 19-Nov-2012 Revised: 17-Nov-2015

Page 20 of 34

7.0 Illustrations Illustration 1 - Marking Label

TO1322****

TO1322****

TO1322****

TO1332****

TO1322**** TO1332****

TO1322****

TO1322****

TO1332****

TO1332****

TO1332****

TO1332****

Notes: (1). The date code is die stamped on the metal blades of the AC attachment plug. The date code is as follows: Y = Last digit of the year WW = Week of the year Example:523 = 23rd week of year 2005 (2). “DO NOT IMMERSE IN WATER ”, “HOUSEHOLD USE ONLY”, "TO ENSURE CONTINUOUS PROTECTION AGAINST RISK OF ELECTRIC SHOCK, CONNECT TO PROPERLY GROUNDED OUTLET ONLY", "To prevent electric shock, unplug before cleaning" and their French shall be not less than 3/32 inch (2.4 mm) in height. (3). “CONFORMS TO UL STD. 1026 ”, “CERTIFIED TO CSA STD. C22.2 NO.1335.1 & 1335.2.9”, the lettering shall be not less than 1.5 mm in height. (4). The ETL logo shall not be less than 8.0 mm in width and 8.0 mm in height, and the “ US”, "C", "3171028" shall be not less than 2 mm in height. "Intertek" shall be not less than 3.0 mm. (5). Models: TO1322****, TO1332****, where '*' be 0-9, A-Z or blank. (6). Alternative brand name "BLACK & DECKER" or "BLACK + DECKER", will be marked on the Glass door.

ED 16.3.15 (1-Jan-13) Mandatory

Report No. GZ12090944-1 Spectrum Brands Inc

Issued: 19-Nov-2012 Revised: 17-Nov-2015

Page 21 of 34

7.0 Illustrations Illustration 1A - Marking Label

TO1373****

TO1373****

TO1373****

TO1373****

TO1373****

TO1373****

TO1303****

TO1303****

TO1303****

TO1303****

TO1303****

TO1303****

Notes: (1). The date code is die stamped on the metal blades of the AC attachment plug. The date code is as follows: Y = Last digit of the year WW = Week of the year Example:523 = 23rd week of year 2005 (2). “DO NOT IMMERSE IN WATER ”, “HOUSEHOLD USE ONLY”, "TO ENSURE CONTINUOUS PROTECTION AGAINST RISK OF ELECTRIC SHOCK, CONNECT TO PROPERLY GROUNDED OUTLET ONLY", "To prevent electric shock, unplug before cleaning" and their French shall be not less than 3/32 inch (2.4 mm) in height. (3). “CONFORMS TO UL STD. 1026 ”, “CERTIFIED TO CSA STD. C22.2 NO.1335.1 & 1335.2.9”, the lettering shall be not less than 1.5 mm in height. (4). The ETL logo shall not be less than 8.0 mm in width and 8.0 mm in height, and the “ US”, "C", "3171028" shall be not less than 2 mm in height. "Intertek" shall be not less than 3.0 mm. (5). Models: TO1373****, TO1303****, where '*' be 0-9, A-Z or blank. (6). Alternative brand name "BLACK & DECKER" or "BLACK + DECKER", will be marked on the Glass door. (7). Alternative Models: TO1356****, where '*' be 0-9, A-Z or blank.

ED 16.3.15 (1-Jan-13) Mandatory

Report No. GZ12090944-1 Spectrum Brands Inc

Page 22 of 34

Issued: 19-Nov-2012 Revised: 17-Nov-2015

7.0 Illustrations Illustration 1B - Marking Label

TO1313****

TO1313****

TO1313****

TO1313****

TO1313****

TO1313****

Notes: (1). The date code is die stamped on the metal blades of the AC attachment plug. The date code is as follows: Y = Last digit of the year WW = Week of the year Example:523 = 23rd week of year 2005 (2). “DO NOT IMMERSE IN WATER ”, “HOUSEHOLD USE ONLY”, "TO ENSURE CONTINUOUS PROTECTION AGAINST RISK OF ELECTRIC SHOCK, CONNECT TO PROPERLY GROUNDED OUTLET ONLY", "To prevent electric shock, unplug before cleaning" and their French shall be not less than 3/32 inch (2.4 mm) in height. (3). “CONFORMS TO UL STD. 1026 ”, “CERTIFIED TO CSA STD. C22.2 NO.1335.1 & 1335.2.9”, the lettering shall be not less than 1.5 mm in height. (4). The ETL logo shall not be less than 8.0 mm in width and 8.0 mm in height, and the “ US”, "C", "3171028" shall be not less than 2 mm in height. "Intertek" shall be not less than 3.0 mm. (5). Models: TO1313****, where '*' be 0-9, A-Z or blank. (6). Alternative brand name "BLACK & DECKER" or "BLACK + DECKER", will be marked on the Glass door.

ED 16.3.15 (1-Jan-13) Mandatory

Report No. GZ12090944-1 Spectrum Brands Inc

Page 23 of 34

Issued: 19-Nov-2012 Revised: 17-Nov-2015

7.0 Illustrations Illustration 2 - Instruction Manual

ED 16.3.15 (1-Jan-13) Mandatory

Report No. GZ12090944-1 Spectrum Brands Inc

Page 24 of 34

Issued: 19-Nov-2012 Revised: 17-Nov-2015

7.0 Illustrations Illustration 2A - Instruction Manual

ED 16.3.15 (1-Jan-13) Mandatory

Report No. GZ12090944-1 Spectrum Brands Inc

Page 25 of 34

Issued: 19-Nov-2012 Revised: 17-Nov-2015

7.0 Illustrations Illustration 3 - Circuit Diagram

ED 16.3.15 (1-Jan-13) Mandatory

Report No. GZ12090944-1 Spectrum Brands Inc

Page 26 of 34

Issued: 19-Nov-2012 Revised: 17-Nov-2015

7.0 Illustrations Illustration 4 - Drawing of Heater Element Upper Quartz Element:

Lower Quartz Element:

ED 16.3.15 (1-Jan-13) Mandatory

Report No. GZ12090944-1 Spectrum Brands Inc

Issued: 19-Nov-2012 Revised: 17-Nov-2015

Page 27 of 34

8.0 Test Summary Evaluation Period

Sep. 21, 2012~Nov. 19, 2012

Sample Rec. Date

Sep. 21, 2012

Test Location

Intertek Testing Services Shenzhen Ltd. Guangzhou Branch (Address: Block E, No.72 Guang Dong Software Science Park, Caipin Road, Guangzhou Science City, GETDD, Guangzhou, China 510663).

Test Procedure

Testing Lab

Condition Prototype

Project No. GZ12090944 S12090944Sample ID. 001~009

Determination of the result includes consideration of measurement uncertainty from the test equipment and methods. The product was tested as indicated below with results in conformance to the relevant test criteria. The following tests were performed:

Test Description Stability Test Strain Relief Test Grounding Test Power Input Test Leakage Current Test Operational Test Normal Temperature Test Tests for Insulation Resistance and Leakage Current as a Result of Moisture Dielectric Voltage Withstand Test Push Back Relief Test Glass Window or Door Impact Test Metal Enclosure Impact Test Non-Metal Enclosure Fasteners Test Abnormal Operation Test

Component Switch and Control Device Strain Relief Test after Mold Stress-Relief Distortion Test Polymeric Enclosure Impact Test Mold Stress-Relief Distortion Test Burnout bread test

CSA C22.2 No. 1335.1-93, Rev. 2008 and CSA C22.2 No. 1335.2.9-93, Rev. 2008 clause 20.1.2 25.15.1 27 10 13 / 11

UL 746C, 6th Edition, Rev. Mar. 7, 2012 clause / / / / / / /

15.3.3 16 / / 21.2 / 19.4

/ / / / / / /

18.2.104, 24.15.2

/

/

/

31

/ /

/ / 19.101.419.101.7

56 61

UL1026 6th Edition, Rev. Jan. 27, 2012 clause 8 10 31 37 38 39 41 43 44 47 50 52 53 55

60

/

/

ED 16.3.15 (1-Jan-13) Mandatory

Report No. GZ12090944-1 Spectrum Brands Inc 8.0 Test Summary Evaluation Period Sample Rec. Date

Issued: 19-Nov-2012 Revised: 17-Nov-2015

Page 28 of 34

Jan. 6, 2014 ~ Jan. 17, 2014 Jan. 6, 2014 Condition Prototype

Project No. 140106067GZU Sample ID. S140106067-001

Test Location

Intertek Testing Services Shenzhen Ltd. Guangzhou Branch (Address: Block E, No.72 Guang Dong Software Science Park, Caipin Road, Guangzhou Science City, GETDD, Guangzhou, China 510663).

Test Procedure

Testing Lab

Determination of the result includes consideration of measurement uncertainty from the test equipment and methods. The product was tested as indicated below with results in conformance to the relevant test criteria. Due to the previous testing performed under Intertek Report GZ12090944-1, only the following testing was performed:

Test Description Normal Temperature Test Metal Enclosure Impact Test Evaluation Period

UL1026 6th Edition, Rev. Jan. 27, 2012 clause 41 52

Jul. 1, 2014 ~ Jul. 14, 2014

CSA C22.2 No. 1335.1-93, Rev. 2008 and CSA C22.2 No. 1335.2.9-93, Rev. 2008 clause 11 21.2

/

/ /

Project No. 140701103GZU

Due to the previous testing performed and reported above, no additional testing was necessary for UL1026, Issued: Jan. 27, 2012, 6th Edition, Rev. May 29, 2014 and CSA C22.2 No. 1335.2.9, Issued: Jan. 1, 1993, R2013 (See also CSA C22.2 No. 1335.1, Issued: Jan. 1, 1993, 1st Edition, R2013). 8.1 Signatures A representative sample of the product covered by this report has been evaluated and found to comply with the applicable requirements of the standards indicated in Section 1.0. Completed by: Title:

Sidney Guo Engineer

Reviewed by: Title:

CJ Zhong Team Leader

Signature:

Signature on file

Signature:

Signature on file

ED 16.3.15 (1-Jan-13) Mandatory

Report No. GZ12090944-1 Spectrum Brands Inc

Issued: 19-Nov-2012 Revised: 17-Nov-2015

Page 29 of 34

9.0 Correlation Page For Multiple Listings The following products, which are identical to those identified in this report except for model number and Listee name, are authorized to bear the ETL label under provisions of the Intertek Multiple Listing Program. BASIC LISTEE

Spectrum Brands Inc

Address

3001 Deming Way, Middleton WI 53562-1431, USA

Country Product

USA Toaster Oven

MULTIPLE LISTEE 1 None. Address Country Brand Name MANUFACTURER Address Country MULTIPLE LISTEE MODELS

BASIC LISTEE MODELS

MULTIPLE LISTEE 2 None. Address Country Brand Name MANUFACTURER Address Country MULTIPLE LISTEE MODELS

BASIC LISTEE MODELS

MULTIPLE LISTEE 3 None. Address Country Brand Name MANUFACTURER Address Country MULTIPLE LISTEE MODELS

BASIC LISTEE MODELS

ED 16.3.15 (1-Jan-13) Mandatory

Report No. GZ12090944-1 Spectrum Brands Inc

Page 30 of 34

Issued: 19-Nov-2012 Revised: 17-Nov-2015

10.0 General Information The Applicant and Manufacturer have agreed to produce, test and label ETL Listed products in accordance with the requirements of this Report. The Manufacturer has also agreed to notify Intertek and to request authorization prior to using alternate parts, components or materials. COMPONENTS Components used shall be those itemized in this Intertek report covering the product, including any amendments and/or revisions. LISTING MARK The ETL Listing mark applied to the products shall either be separable in form, such as labels purchased from Intertek, or on a product nameplate or other media only as specifically authorized by Intertek. Use of the mark is subject to the control of Intertek. The mark must include the following four items: 1) applicable country identifiers "US" and/or "C" or "US", "C" and "EU" 2) the word "Listed" or "Classified" or "Recognized Component" (whichever is appropriate) 3) a control number issued by Intertek 4) a product descriptor that identifies the standards used for certification. Example: For US standards, the words, “Conforms to” shall appear with the standard number along with the word, “ Standard” or “Std.” Example: “Conforms to UL Std. XX.” For Canadian standards, the words “Certified to CSA Standard CXX No. XX.” shall be used, or abbreviated, “ Cert. to CSA Std. CXX No. XX.” Can be used together when both standards are used. Note: A facsimile must be submitted to Intertek, Attn: Follow-up Services for approval prior to use. The facsimile need not have a control number. A control number will be issued after signed Certification Agreements have been received by the Follow-up Services office, approval of the facsimile of your proposed Listing Mark, satisfactory completion of the Listing Report, and scheduling of a factory assessment in your facility.

MANUFACTURING AND PRODUCTION TESTS Manufacturing and Production Tests shall be performed as required in this Report. FOLLOW‑UP SERVICE Periodic unannounced audits of the manufacturing facility (and any locations authorized to apply the mark) shall be scheduled by Intertek. An audit report shall be issued after each visit. Special attention will be given to the following: 1. Conformance of the manufactured product to the descriptions in this Report. 2. Conformance of the use of the ETL mark with the requirements of this Report and the Certification Agreement. 3. Manufacturing changes. 4. Performance of specified Manufacturing and Production Tests. In the event that the Intertek representative identifies non-conformance(s) to any provision of this Report, the Applicant shall take one or more of the following actions: 1. Correct the non-conformance. 2. Remove the ETL Mark from non-conforming product. 3. Contact the issuing product safety evaluation center for instructions.

ED 16.3.15 (1-Jan-13) Mandatory

Report No. GZ12090944-1 Spectrum Brands Inc

Page 31 of 34

Issued: 19-Nov-2012 Revised: 17-Nov-2015

10.1 Evaluation of Unlisted Components Because Unlisted Components are uncontrolled, and they do not fall under a third party follow up program, Intertek may require these components to be tested and/or evaluated at least once annually, more often for certain components, as part of the independent certification process. The Unlisted Components in Section 5.0 require testing and/or evaluation as indicated. Note to Intertek Follow Up Inspector: The Component Evaluation Center, CEC, will notify you in writing when these components must be selected and sent to the CEC for re-evaluation Ship the samples to: Intertek Testing Services Shenzhen Limited Guangzhou Branch ETL Component Evaluation Center Block E, No. 7-2 Guang Dong Software Science Park, Caipin Road, Guangzhou Science City CETDD Guangzhou, China. Attn: Ms. Joey Kuang Sample Disposition: Due to the destructive nature of the testing, all samples will be discarded at the conclusion of testing unless, the manufacturer specifically requests the return of the samples. The request for return must accompany the initial component shipment.

ED 16.3.15 (1-Jan-13) Mandatory

Report No. GZ12090944-1 Spectrum Brands Inc

Page 32 of 34

Issued: 19-Nov-2012 Revised: 17-Nov-2015

11.0 Manufacturing and Production Tests The manufacturer agrees to conduct the following Manufacturing and Production Tests as specified: Required Tests Dielectric Voltage Withstand Test Grounding Continuity Test 11.1 Dielectric Voltage Withstand Test Method One hundred percent of production of the products covered by this Report shall be subjected to a routine production line dielectric withstand test. The test shall be conducted on products, which are fully assembled. Prior to applying the test potential, all switches, contractors, relays, etc., should be closed so that all primary circuits are energized by the test potential. If all primary circuits cannot be tested at one time, then separate applications of the test potential shall be made. The test voltage specified below shall be applied between primary circuits and accessible dead-metal parts. The test voltage may be gradually increased to the specified value but must be maintained at the specified value for one second or one minute as required. Test Equipment The test equipment shall incorporate a transformer with an essentially sinusoidal output, a means to indicate the applied test potential, and an audible and/or visual indicator of dielectric breakdown. The test equipment shall incorporate a voltmeter in the output circuit to indicate directly the applied test potential if the rated output of the test equipment is less than 500VA. If the rated output of the test equipment is 500VA or more, the applied test potential may be indicated by either: 1 - a voltmeter in the primary circuit; 2 - a selector switch marked to indicate the test potential; or 3 - a marking in a readily visible location to indicate the test potential for test equipment having a single test potential output. In cases 2 and 3, the test equipment shall include a lamp or other visual means to indicate that the test potential is present at the test equipment output. All test equipment shall be maintained in current calibration.

Products Requiring Dielectric Voltage Withstand Test: Product All products covered by this Report.

Test Voltage 1000V or 1200V

Test Time 60 s 1s

11.2 Grounding Continuity Test Method Each product listed below shall be subjected to a test to determine that there is continuity between accessible dead-metal parts of the product and the grounding pin or blade of the attachment plug. If all accessible dead metal is connected, only a single test need be performed. A visual or audible device (ohmmeter, buzzer, etc.) may be used to indicate grounding continuity. Products Requiring Grounding Continuity Test: All products covered by this Report.

ED 16.3.15 (1-Jan-13) Mandatory

Report No. GZ12090944-1 Spectrum Brands Inc

Page 33 of 34

Issued: 19-Nov-2012 Revised: 17-Nov-2015

12.0 Revision Summary The following changes are in compliance with the declaration of Section 8.1: Date/ Project Handler/ Section Item Description of Change Proj # Site ID Reviewer Photo 21-Jan-2013 Richard Liang 3.0 Corrected the photo for External View of Model TO1332***. 2 Photo Added photo for view of alternative construction for all 130104013GZU 16-17 models. Benson Li Changed the manufacturer name from "Zhongshan Galanz 17-Jan-2014 Richard Liang 1.0 -- Household Appliances Co., Ltd." to "Guangdong Galanz Microware Electrical Appliances Manufacturing Co, Ltd". Photo 140106067GZU 3.0 Added remark for photo 11, 12. 11, 12 Added alternative 0.4mm thick SPCD or SUS430 material for CJ Zhong 4.0 2 Panel. Added alternative 0.5mm thick SPCC material for Upper & 3b Lower Door Clamp. Added alternative 0.35mm thick SPCC material for Metal 9 Chamber. Added an optionally provided Cover Base for TO1303***, 13d TO1313***, TO1373***. Added alternative 0.35mm thick SA1C material for Quartz 20 Protecting Cover. 8.0 -- Added evaluation information. Updated the standard from "UL1026 6th Edition, Rev. Jan. 27, 2012" to "UL1026, Issued: Jan. 27, 2012, 6th Edition, Rev. May 29, 2014", updated the standard from "CSA C22.2 14-Jul-2014 Sidney Guo 1.0 -- No. 1335.2.9-93, Rev. 2008 (See also CSA-C22.2 No. 1335.1-93, Rev. 2008)" to "CSA C22.2 No. 1335.2.9, Issued: Jan. 1, 1993, R2013 (See also CSA C22.2 No. 1335.1, Issued: Jan. 1, 1993, 1st Edition, R2013)". Full Revised the Applicant from "Applica Consumer Products Inc" 140701103GZU CJ Zhong -report to "Spectrum Brands Inc". Updated the Applicant address to "3001 Deming Way, 1.0, 9.0 -Middleton WI 53562-1431, USA". 1.0 -- Updated the Applicant contact information. Updated the brand name from "Black & Decker" to "BLACK & DECKER" for all models. 2.0 -- Added brand name BLACK + DECKER for all models. Added brand name APPLICA CONSUMER PRODUCTS, INC. for all models. Revised the models suffix from “***” to "****", revised the -suffix description for all models. All 3.0 photo Revised the models suffix from “***” to "****". s 4.0 14 Added an alternative Function-select Switch, model YX1. Updated the brand name from "Black & Decker" to "BLACK & DECKER" on marking labels for all models. 7.0 Ill. 1 Added marking labels with brand name BLACK + DECKER for all models. Updated the models suffix from “***” to "****" on the marking Ill. 1 labels, revised the suffix description for all models. 8.0 -- Added the test summary for this evaluation. 8.1 -- Revised with new signatures. Added the models TO1356****, where '*' be 0-9, A-Z or 13-Feb-2015 Spark Li 2.0 -blank. Photo 150211022GZU Harry Song 3.0 Added the photo for TO1356****. 4A 7.0 Ill. 1A Added the note item 7. ED 16.3.15 (1-Jan-13) Mandatory