LexCom Home

®

Product catalogue 2003-01

Principle of the system

Distribution centre

Distribution module for phone/ISDN/fax/modem

Data module

TV/radio module

Patch cable

Universal outlets

Universal patch modules Shielded installation cable

2 LexCom Home®/MC1818INT/0203

LexCom Home® Distribution centre . . . . . . . . . . . . . . . . . . . . 4 Accessories

........................ 4

Outlets . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Modules . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Port Exp.Mbps 10

12V 0V Data

Link/

LEX25420

Col

Exp

Pwr

Data

LexC

om

Ho

hub

H1

00

The number beside line drawings and photographs is used only when ordering digital picture material.

me

Products and technical data may be subject to changes during the validity of the brochure. © LEXEL AB, 2002.

LexCom Home®/MC1818INT/0203 3

Distribution centre Design

Dimensions WxHxD

Weight kg/100

Qty /pack

Article no.

LEX41730

LexCom Home distribution centre, flush mounting Specially-adapted DIN centre for the LexCom Home system. The centre is flush mounted in a wall and requires a recess depth of 90 mm. Marking materials for the distribution centre and the modular outlets are supplied, as well as an installation diagram. The centre is made up of a flush mounting box and a cover for the DIN units. Two centres can be linked vertically or horizontally using special fittings. In the top/bottom of the centre there is a strain relief bracket for the permanently installed wiring. The centre has a common earthing terminal block for the entire system (max 2x4 mm), which is internally connected to metallic components for central earthing of the entire system. Degree of protection: IP20. Insulation class: Fully insulated. For 12 modules, white For 12 modules, grey

371x676x118 371x676x118

283 283

1 1

30 614 0003 30 614 0004

LEX25400

LexCom Home distribution centre, surface mounting Specially-adapted DIN centre for the LexCom Home system. The centre is surface mounted on a wall. Marking materials for the distribution centre and the modular outlets are supplied, as well as an installation diagram. The centre is made up of a baseplate with back frame, and a cover for the DIN units. There are cable entry knockouts in the top and bottom and on the long sides. In the top/bottom of the centre there is a strain relief bracket for the permanently installed wiring. The centre has a common earthing terminal block for the entire system (max 2x4 mm), which is internally connected to metallic components for central earthing of the entire system. The centre is supplied with a door. Degree of protection: IP20. Insulation class: Fully insulated. For 12 modules, white For 12 modules, grey

264x572x117 264x572x117

234 234

1 1

30 614 0001 30 614 0002

Accessories

LEX 28230

Design

LEX 28250

Weight kg/100

Qty /pack

Article no.

Linking fittings for LexCom Home flush-mounted distribution centre Linking fittings for horizontal or vertical mounting of two adjacent distribution centres. Horizontal linking fittings

LEX 28260

Dimensions WxHxD

760x280x30

52.8

1

30 617 0001

Vertical l linking fittings, grey 520x250x20

26.9

1

30 617 0002

Vertical linking fittings, white

520x250x20

26.9

1

30 617 0003

Wall brackets

160x110x10

5.6

4

30 617 0004

LEX 28290

LEX 28280

Linking fittings for LexCom Home surface-mounted distribution centre Linking fittings for horizontal or vertical mounting of two adjacent distribution centres. Horizontal linking fittings

250x120x25

4.2

1

30 617 0007

Vertical linking fittings

250x50x25

6.1

1

30 617 0008

1 1

30 617 0006 30 617 0005

Blanking plate

LEX 28270

Blanking plate for unused space in the LexCom Home centre. Blanking plate, white Blanking plate, grey

4 LexCom Home®/MC1818INT/0203

73x45x10 73x45x10

0.85 0.85

Outlets Design

Dimensions WxHxD

Weight kg/100

Qty /pack

Article no.

LexCom Home outlets, flush-mounted flat in Lexel Senso design

LEX47150

Complete modular outlets for radio/TV/phone/data, etc., with dust shutter, containing a socket outlet for c-c 60 mm apparatus box, centre plate with marking window, and installation instructions, in Lexel Senso design. Technical specification: Bandwidth Loss Crosstalk Shielding Transfer impedance

0 - 860 MHz < 0.4 dB up to 100 MHz < 43 dB up to 100 MHz < 20 dB up to 100 MHz 100 ohm ±15 %

2x8-way modular outlet horizontal, white

84x90x45

17

1

Local number

2x8-way modular outlet horizontal, Alu metal

84x90x45

17

1

Local number

2x8-way modular outlet horizontal, light/dark grey

84x90x45

17

1

Local number

2x8-way modular outlet horizontal, greyish green

84x90x45

17

1

Local number

2x8-way modular outlet vertical, white

90x84x45

17

1

Local number

2x8-way modular outlet vertical, Alu metal

90x84x45

17

1

Local number

2x8-way modular outlet vertical, light/dark grey

90x84x45

17

1

Local number

2x8-way modular outlet vertical, greyish green

90x84x45

17

1

Local number

Cable Design

Dimensions Length

Weight kg/km

Qty /pack

Article no.

LEX25450

LexCom Home installation cable Double-shielded (S-STP/PimF) broadband cable for indoor use. The cable is supplied with a white halogen-free sheath and metre markings printed on it. The cable is available in single pattern with four pairs which are individually screened with foil, with a common external braid of tinned copper. The outer sheath of the foil is conducting. Outer sheath of halogen-free material, LSFROH. The length of the cable when installed must not exceed 40 metres. Supplied on 300 or 500 metre reels. Technical specification: Colour code Outside diameter Conductors Impedance Bandwidth Shielding Protection from interference Ambient temperature Bending radius

4x2x0.57 (AWG 23) 4x2x0.57 (AWG 23)

yellow-green, orange-grey, brown-blue, black-red 7.5 mm AWG 23, Ø = 0.57 mm 100 ohm 1000 MHz > 70 dB > 90 dB on installation 0 ºC to +50 ºC permanently installed 20 ºC to +50 ºC on installation 4 x the diameter permanently installed 3 x the diameter 300 m 500 m

70 70

1 1

30 627 0001 30 627 0002

LexCom Home®/MC1818INT/0203 5

Cable, cont’d. Design

Dimensions Length

Weight kg/100

Qty /pack

Article no.

LEX25460

Patch cable for LexCom Home distribution centre Shielded patch cable RJ45 – RJ45, for patching between patch modules and active components in the distribution centre. The shortest possible cable should be connected between the units. Supplied in a kit with three lengths of patch cable. Grey halogen-free cable (LSFROH). Technical specification: Bandwidth Conductor size Impedance

800 MHz AWG 26 stranded 100 ohm

RJ45 -– RJ45

24, 27, 32 cm

5.9

1+1+1

30 644 0001

LEX44030

LEX25490

Radio/TV connecting cable Cable to connect between outlets and TV, video etc. The cable is made of coaxial cable. At one end there is a male IEC coax connector to connect to a TV etc. The other end is fitted with an RJ45 plug with a built-in balun for impedance matching (100 – 75 ohm) for connection to the outlet. The cable comes with a female adapter (IEC female-female) adapter to connect to a radio. White halogen-free cable (LSFROH). RJ45 – IEC male Connecting cable for radio/TV/IR-link

2m 2m

9.9 10.5

1 1

30 646 0004 30 646 0003

LEX25480

Telephone connecting cable Cable to connect between an outlet and a telephone. The cable has an RJ11 (six-way modular) connector at one end to connect to the telephone and an RJ45 (eight-way modular) at the other end to connect to the modular outlet. Four-core flat cable, light grey. RJ45 – RJ11 RJ45 – RJ11

2m 5m

3.6 7.3

1 1

30 646 0001 30 646 0002

LEX26900

Data connecting cable Cable to connect between outlets and computer, printer etc. The cable has RJ45 plugs at both ends, with moulded contacts. Shielded. Shielded connecting cables

RJ45 RJ45 RJ45 RJ45 RJ45 RJ45

– – – – – –

RJ45 RJ45 RJ45 RJ45 RJ45 RJ45

6 LexCom Home®/MC1818INT/0203

Cat Cat Cat Cat Cat Cat

5e 5e 5e 5e 5e 5e

STP STP STP STP STP STP

0.5 m 1.0 ” 2.0 ” 3.0 ” 5.0 ” 10.0 ”

3.5 4.5 8.0 13.0 18.0 35.0

1 1 1 1 1 1

30 30 30 30 30 30

641 641 641 641 641 641

0007 0008 0009 0010 0011 0012

Modules Design

Dimensions WxHxD

Weight kg/100

Qty /pack

Article no.

TV/radio module for DIN, A100 0V

12V

RF in

put

LEX25410

Pwr

R/TV

LexC

om

Hom

e

Ga

A1

00

in

DIN TV/radio module the LexCom Home system. The module mounts on a DIN rail in the distribution centre. On the front there are four shielded RJ45 sockets, a power indication diode and a potentiometer to adjust the gain. On top of the module there are sockets for power supply (12 V DC) and aerial signal via an F-connector. The module has a built-in amplifier which boosts the signal over the range 18 dB to 32 dB at 860 MHz. The gain is adjusted with the potentiometer. The TV/radio cable must be used at the outlet. This cable contains a balun for 75/100 ohm impedance matching. Technical specification: Rated voltage Current Internal power consumption Bandwidth Out put voltage CTB CTB Gain Interference factor Return loss Output impedance Input impedance Ambient temperature Storage temperature Module width M36 Standard

11.5 - 14 V DC, max ripple 50 mVpp 300 mA 3.6 W 47 - 862 MHz 4x112 dBµV (DIN45004B) 93 dBµV 90 dBµV 18 - 32 dB (adjustable) 6.5 dB @ 860 MHz > 14 dB @ 40 MHz (-1.5 dB/oct., min 10 dB) 100 ohm 75 ohm 0 °C to +40 °C 0 °C to +70 °C two modules EN 50083, Quality grade 2

TV/radio module A100

72x86x37

12.2

1

30 633 0002

TV/radio module for DIN, A110 ut RF inp

0V 12V

k IR lin

Pwr

AV

link

LEX40020

R/TV

Co Lex

m

Hom

e

10-65 A1

Ga

in

DIN TV/radio module with return traffic, IR link and AV link for the LexCom Home system. The module mounts on a DIN rail in the distribution centre. On the front there are seven shielded RJ45 sockets, a power indication diode and a potentiometer to adjust the gain. Two of the seven RJ45 ports on the front of the module are intended for return traffic and for forward TV distribution, four for forward TV distribution without return, and one for AV input. On top of the module there are sockets for power supply (12 V DC) and TV signal via an F-connector. The module has a built-in amplifier which boosts the signal over the range 10 dB to 34 dB at 860 MHz. The gain is adjusted with the potentiometer. The TV/radio cable must be used at the outlet. This cable contains a balun for 75/100 ohm impedance matching. There are three versions of TV/radio module A110 with different carrier frequencies for return traffic. Technical specification: Rated voltage Current Internal power consumption Output impedance Input impedance Bandwidth Output voltage CTB CSO Gain Interference factor Return Loss Stop band attenuation Ambient temperature Storage temperature Module width M36 Standard

11.5 - 14 V DC, max ripple 50 mVpp 290 mA 3.5 W 100 ohm 75 ohm 47 - 862 MHz (return band 5 - 30 MHz) 70 - 862 MHz (return band 5 - 55 MHz) 85 - 862 MHz (return band 5 - 65 MHz) 108 dB µV x 6 (DIN45004B) 94 dBµV 88 dBµV 10 - 34 dB < 6.0 dB @ 860 MHz > 14 dB @ 40 MHz (-1.5 dB/oct., min 10 dB) min. 55 dB 0 °C to +40 °C 0 °C to +70 °C two modules EN 50083, Quality grade 2

TV/radio module A110–30 TV/radio module A110–55 TV/radio module A110–65

72x86x37 72x86x37 72x86x37

18.0 18.0 18.0

1 1 1

30 633 0003 30 633 0004 30 633 0005

LexCom Home®/MC1818INT/0203 7

Modules, cont’d. Design

Dimensions WxHxD

Weight kg/100

Qty /pack

Article no.

AV Modulator

LEX41670

LEX41650

AV modulator for the LexCom Home system. The AV modulator is used when there is a video source that is not centrally located and where the signal from the video source is required to be distributed via the LexCom Home system to several television sets. The signal form the video source is connected via the AV modulator, which modulates the frequency to a presettable channel. The modulator is then connected to the AV input of the TV/radio module A110 via the LexCom Home outlet. The signal from the video source can then be viewed on every television set connected to the LexCom Home system in the house. The modulator has an input on IR link and a built-in adjustable amplifier. A 230/12 V AC adapter is supplied. Technical specification: Supply voltage Internal power consumption

12 V AC (external) 2 W (AV110-1) 4.5 W (AV110-4) Audio input RCA-phono > 10 kohm Video input RCA-phono > 75 ohm Output RJ45, STP, 100 ohm Output level 105 dBµV Gain 10 - 25 dB (adjustable) Bandwidth 130 - 470 MHz Sound format mono System standard (PAL/SECAM) B (Europe), (selectable) L (France), I (UK), D (Eastern Europe) AV-110-1 170x47x160 AV-110-4 170x47x160 Available first quarter of 2002

4 5

1 1

30 635 0008 30 635 0009

LEX41710

IR transmitter/receiver IR transmitter and receiver for the LexCom Home system. The IR transmitter/receiver can be supplied as one unit or as separate products.

LEX41700

Technical specification, receiver: Internal power consumption 0.1 W Range up to 15 metres Frequency window 35 - 500 kHz IR transmitter, accessory (extra) 1.5 m IR receiver, accessory (extra) 3 m/0.03x0.0 IR system complete Available first quarter of 2002

0.1

1 1 1

30 635 0003 30 635 0002 30 635 0001

Data module for DIN, H100 Port Exp.Mbps 10

12V 0V Link/

Col

Data

Exp

LEX25420

Pwr

00 H1 hub Data

Lex

Co

m

Hom

e

Ethernet 10Base-T hub with four RJ45 ports, for communication between four network devices in the LexCom Home system. The module mounts on a DIN rail in the distribution centre. On the front there are four RJ45 jacks, a reset button to reset the module, and LEDs to indicate power supply, link transmission and collision detection. On top of the module there is a power socket and an expansion port to which uplink modules for external network connection can be connected. Technical specification: Rated voltage Current Internal power consumption Output impedance Transmission type Transmisson speed Ambient temperature Storage temperature Module width M36 Standard

11.5 - 14 V DC, max ripple 50 mVpp 300 mA 3.6 W 100 ohm Half duplex 10 Mbps 0 °C to +40 °C 0 °C to +70 °C two modules IEEE 802.3

Data module, H100

72x86x37

8 LexCom Home®/MC1818INT/0203

11

1

30 633 0001

Modules, cont’d. Design

Dimensions WxHxD

Weight kg/100

Qty /pack

Article no.

Uplink module for data module for DIN, H100 LEX25470

Ethernet 10Base-T/F uplink adapter for hub H100. The uplink adapter has one RJ45 plug to connect to the expansion port on the hub. There are two versions of the uplink adapter, with interface to connect to copper or optical fibre. The 10 Base-T adapter has an RJ45 connection to an external network and the 10Base-F adapter has ST optical fibre connectors for connection to an external network. The uplink modules are powered via the expansion port on the hub. Both modules have LED indication for link/data. Uplink module 10Base-T 30x25x160 Uplink module 10Base-F 30x25x160 Available first quarter of 2002

2.9 2.9

1 1

30 635 0005 30 635 0006

Patch module for DIN, P100 C

LEX25440

A

Patch

m Co Lex

P100

e Hom

D

The patch module mounts on the top and bottom DIN row of the distribution centre. The patch module connects the modular outlets in the rooms to the chosen media (TV, phone, data) via the LexCom Home cable and the patch cable. There are connection for two cables on the top and two on the bottom of the module. The shield is connected via the strain relief holder on the module to the distribution centre via the fully-shielded sheath of the product. Connections are made via the LSA terminal block in the module.

B

Technical specification: Bandwidth Loss Crosstalk Shielding attenuation Output impedance Ambient temperature Storage temperature Module width M36 Max cable length

0 - 860 MHz < 0.4 dB < 43 dB (100 MHz) > 20 dB 100 ohm 0 °C to +40 °C 0 °C to +70 °C two modules 40 metres between outlet and module

Patch module, P100

72x86x37

10.5

1

30 616 0001

Telephone module for DIN, T100 S0 ISDN

LEX25430

2 1 input Line

B A

2

Tele

B A e Hom NING m k AR Co B W ys chsecfor Lex A

1

Alwa ktion gs instruh settin switc

3

T100

Parallel telephone module with eight RJ45 outlets. The module mounts in the middle row of the distribution centre. The telephone module splits the incoming telephone signal and distributes it to the eight output ports. The ports are connected in parallel. There is no secrecy. The module is configured with the three built-in microswitches. On top of the module there are two connecting terminals for analog telephone lines (line 1 and 2) and an RJ45 port for an ISDN line from the NT terminal (S0 bus). If an ISDN line is connected, only one extra analog telephone line can be connected. Technical specification: Number of inputs

Ambient temperature Storage temperature Module width M36 Standard

one ISDN S0 Bus (RJ45) two analog telephone lines eight RJ45 jacks, one of which is used as an ISDN port after configuration 0 °C to +40 °C 0 °C to +70 °C two modules IEC 512-2, 1985 Test 3A Method C

Telecoms module, T100

72x86x37

Number of outputs

12.6

1

30 633 0006

LexCom Home®/MC1818INT/0203 9

Modules, cont’d. Design

Dimensions WxHxD

Weight kg/100

Qty /pack

Article no.

Telephone module for DIN, T105 S0 ISDN

LEX40560

2 1 input Line

T105 Tele

B

Co Lex A 1

m

A e Hom NING k AR B W ys checfor ns wa

2

Al uktio gs instr h settin switc

Serial telephone module with eight RJ45 outlets. The module mounts in the middle row of the distribution centre. The telephone module splits the incoming telephone signal and distributes it to the eight output ports. The ports are connected in series, with secrecy. Because of the serial connection, the patch cabling must be connected in numerical sequence for the telephone line to be connected forward. The module is configured with the two built-in microswitches. On top of the module there are two connecting terminals for analog telephone lines (line 1 and 2) and an RJ45 port for an ISDN line from the NT terminal (S0 bus). If an ISDN line is connected, only one extra analog telephone line can be connected. Technical specification: Number of inputs

Ambient temperature Storage temperature Module width M36 Standard

one ISDN S0 Bus (RJ45) two analog telephone lines eight RJ45 jacks, one of which is used as an ISDN port after configuration 0 °C to +40 °C 0 °C to +70 °C two modules IEC 512-2, 1985 Test 3A Method C

Telecoms module, T105

72x86x37

Number of outputs

12.6

1

30 633 0007

ISDN module for DIN, T110 S0 ISDN OO

LEX40010

L 100S

T110 Tele

Lex

Co

m

Hom

e

Parallel ISDN module with eight RJ45 outlets. The module mounts in the middle row of the distribution centre. The ISDN module splits the incoming ISDN signal (S0) and distributes it to the eight output ports, on the “short passive bus” principle. The module has a 100 ohm termination resistor so that the module can be configured for the NT terminal. On top of the module there is an RJ45 port for the ISDN line from the NT terminal. Only ISDN telephones (S0 compatible) or the equivalent may be connected to the module. Technical specification: Number of inputs Number of outputs Ambient temperature Storage temperature Module width M36 Standard

one ISDN S0 Bus (RJ45) eight RJ45 jacks 0 °C to +40 °C 0 °C to +70 °C two modules none

ISDN module, T110

72x86x37

10 LexCom Home®/MC1818INT/0203

12.6

1

30 633 0008

Design

Dimensions WxHxD

Weight kg/100

Qty /pack

Article no.

Power supply

LEX25780

A switched-mode power supply (SMPS) with high efficiency, stability and low heat radiation. The power supply is mounted in the top of the distribution centre, using the holder supplied. Connects to 230 V AC.

B100 apter Tele Ad N RETUR 2 1

LEX25500

IN

Technical specification: Supply voltage Output level Secondary voltage Load Efficiency Temperature range Dimensions Insulation class

90-260 VAC @ 47 - 63 Hz < 50 mVpp 12 V DC max 15 W 85 % -5 ºC to +40 ºC WxHxD = 103x37x50 mm excluding holder double insulated (Class II)

Power supply unit 12 V DC

103x37x50

29.9

1

30 635 0004

ISDN adapter, B100 OUT

The ISDN adapter is a passive component for connection to a LexCom Home socket with distributed ISDN S0 bus. The adapter is used when an ISDN router (T/A) is to be connected to the system. The analog ports of the ISDN router are connected to the adapter, so that the analog lines are distributed back to the telecoms module, where they are available for ordinary analog telephones connected at the remaining wall socket. The ISDN adapter comes with connecting cables for the ISDN router. Technical specification: Inputs Output Standard

two RJ11, one RJ45 one RJ45 IEC 512-2, 1985 Test 3A Method C

ISDN adapter box B100

78x40x22

7.5

1

30 635 0007

LEX42720

LEX41630

PC-player, PCP110 FM stereo modulator for the LexCom Home system. The modulator is used when there is an audio source that is not centrally located and where the signal from the source is required to be distributed via the LexCom Home system to all the stereo and HiFi installations in the home. The modulator is intended specially for the distribution of MP3 and Internet radio from the sound card of a PC. The signal from the audio source is connected via the modulator, which modulates the signal to a presettable FM channel. The modulator is then connected to the AV input of the TV/radio module A110 via the LexCom Home outlet. The modulator has an input an IR link and a built-in amplifier. Connecting cables between PC and modulator are supplied. Technical specification: Supply voltage Internal power consumption Audio input Output Output level Gain Bandwidth Audio format

5 V DC (external) 0.5 W RCA-phono > 10 kohm RJ45, STP, 100 ohm 60 dBµV 0 - 10 dB (adjustable) 88 - 108 MHz stereo

PCP110 complete 170x47x80 Available first quarter of 2002

2.1

1

30 635 0010

LexCom Home®/MC1818INT/0203 11

Head Office: Lexel AB, P.O. Box 6297, SE-102 35 Stockholm, Sweden Phone +46 (0)8 729 08 00. Fax +46 (0)8 31 66 80 Sales Offices, see: www.lxg.com

MC1818INT/0203 © LEXEL AB, 2002. Österbergs & Sörmlandstryck, Nyköping 23939

Lexel in brief The Lexel Group is one of Europe’s leading suppliers of installation solutions for power, telecom, datacom and control applications with special focus on 'smart buildings', i.e. buildings equipped with technology providing increased levels of comfort, economy and security. The Lexel product programme includes everything from switches, outlets, installation materials and installation systems for cable management to communication networks, security systems, and systems and software for control of building functions. Respect for the environment is an integral part of all Lexel activities. One example is the development and certification of environmental management systems complying with ISO 14000. In the field of polymers Lexel is working to eliminate the use of heavy metals and ozone-depleting substances. The Lexel Group is owned by Schneider Electric of France and has its operational head office in Stockholm. The Group has a turnover of over EUR 650 million and employs some 6000 people. Lexel is a market leader in the Nordic countries, Poland and the Baltic States, but is also strongly placed in Russia and a number of Central European countries. Sales are effected through subsidiaries in 18 countries and distributors in more than 30.