LED MR-16 Lamp Features • • • • • • • • •
Part No. WL-L04MR16-Wxx-D
Designed as a direct retrofit in most MR-16 light fixtures Low power consumption: 4W LED lamp, for replacement of 35W halogen lamp Long life: 40,000 lifetime hours 12V AC/DC input voltage High color consistency Shock-proof and vibration-proof UL listed under enclosed conditions UV and NIR radiation free Mercury free
Product Offering Item
Description Wattage
Input Voltage
CCT
WL-L04MR16-W27 4W 12VAC/DC WL-L04MR16-W30 4W 12VAC/DC WL-L04MR16-W35 4W 12VAC/DC WL-L04MR16-W60 4W 12VAC/DC • Beam Angle Selection: 24°/40° full beam angle • CCT range selection: 2700-2800K; 3000-3200K; 5500-6500K • Housing finish: black • Base GU5.3
2700K 3000K 3500K 6000K
Wamco is proud to present one of the first Single-lens MR-16 LED Lamp Replacements to the market. With CREE’s highest efficiency LED and our cutting-edge optics design, this LED lamp will replace a 35W halogen lamp with only 4W of power consumption.
Application Information Applications • Tracking lighting • Spot lighting • Display and cabinet lighting • Architectural lighting • Art gallery and museum lighting • Industrial and commercial area lighting
CALL 1-714-545-5560
FAX 1-714-545-6093
Notes • Operating temperature range between -20°C ~ +40°C • Storage temperature range between -30° ~ +70°C • Input voltage o 11 ~ 13VAC o 12 ~ 15VDC • For use in dry indoor applications only • Not for use where exposed to weather • Not intended for use with emergency exit fixtures or emergency lights
VISIT W: WWW.WAMCOINC.COM
EMAIL E:
[email protected]
LED MR-16 Lamp Common Characteristics 1 Average Lifetime 2
Starting Time
Switching Cycles (30s on, 30s off)
Warm Up Time for 60% Light
Working Conditions
Tc Temperature Max 3
Mercury Max
40, 000H
0.01s
1,000, 000
None
-20 ~+40°C
80°C
0.0mg
LED Brand Samsung
Length
Diameter
42mm
49mm
Weight 4
Input Voltage
55g
12VAC/DC
Nominal Current (12VAC/60HZ) 0.6A max
Power
Power Factor
4W
>0.7
Characteristic Range 1 Type Reference WL-L04MR16-W27NF-D WL-L04MR16-W30NF-D WL-L04MR16-W35NF-D WL-L04MR16-W60NF-D WL-L04MR16-W27FL-D WL-L04MR16-W30FL-D WL-L04MR16-W35FL-D WL-L04MR16-W60FL-D
Luminous Flux
CRI
CCT
Beam Angle
Base
270Lm 300Lm 340Lm 360Lm 270Lm 300Lm 340Lm 360Lm
80 80 80 75 80 80 80 75
2725 + 145K 3045 + 175K 3465 + 245K 6000 + 400K 2725 + 145K 3045 + 175K 3465 + 245K 6000 + 400K
25°° 25° 25°° 25°° 40° 40° 40° 40°
GU5.3 GU5.3 GU5.3 GU5.3 GU5.3 GU5.3 GU5.3 GU5.3
The product maintains a tolerance of + 10% on flux, + 5% on CCT measurements and + 2 on CRI measurements.
1
2
3 4
Typical values, measured @ 12V AC/60HZ. All technical parameters apply to the entire lamp. In view of the complex manufacturing process for LEDs, the typical values provided above for the technical LED parameters are merely statistical values that do not necessarily correspond to the actual parameters of an individual product; individual products may vary from the typical values. The average lifetime of LED lamps is defined as the number of hours when the light output of 50% of a large group of identical lamps goes below 70% of its initial luminous flux (L70B50, IEC6096). The lifetime is estimated open lamps at room (Ta = 25°C), free air burning, base up burning position and at rated voltage. The Tc is defined as the highest permissible temperature which may occur on the outer surface of the LED lamp under normal operating conditions and at the rated voltage/current/power or the maximum of the rated voltage/current/power range. This is the typical value, due to the product using silicone potting process, and considering the silicone potting process weight uncertainly. Therefore, the consistency of product weight cannot be guaranteed. Expected weight deviation is 8%.
CALL 1-714-545-5560
FAX 1-714-545-6093
VISIT W: WWW.WAMCOINC.COM
EMAIL E:
[email protected]
LED MR-16 Lamp Mounting Information Unit: mm
Intensity 5 Unit: cd
Unit: cd
Center intensity spread angle (50%): 26.1 deg
Center intensity spread angle (10%): 51.4 deg
* 25° lens data testing result
5
Center intensity spread angle (50%): half beam angle; Center intensity spread angle (10%): full beam angle.
CALL 1-714-545-5560
FAX 1-714-545-6093
VISIT W: WWW.WAMCOINC.COM
EMAIL E:
[email protected]
LED MR-16 Lamp Photometric 3000K / 25° Illuminance
3000K / 40° Illuminance
6000K / 25° Illuminance
6000K / 40° Illuminance
1m
710Lux
585Lux
770Lux
690 Lux
2m
175Lux
140Lux
190Lux
155 Lux
3m
75Lux 715 cd
60Lux 590 cd
80Lux 780 cd
65 Lux 690 Lux
Throw Distance
CBCP
Compatibility Performance With Transformers Without Dimmer Number of Lamps Tested (@ 120V Input) Electronic Transformers Technologies Lightech Lightech Wang House Philips OSRAM OSRAM
FX95100 LET-60LW LET-60 WH-601E6A-3B ET-E60 ET-Z60 ET-P60 Legend:
1 G G G G G G G G = Good
2
3
4
5
Note
G NG G N/A
* * * *
NG NG G G G G N/A - Not Applicable
* * *
G G G G NG NG G G G G G N/A Number of Lamps Tested (@ 220V Input) G NG G G G G NG = Poor Function
* The test results were achieved using the electronic transformers mentioned above, the compatibility of other electronic transformers may need further testing
CALL 1-714-545-5560
FAX 1-714-545-6093
VISIT W: WWW.WAMCOINC.COM
EMAIL E:
[email protected]
LED MR-16 Lamp Dimming Behavior 6 Dimmer Brand
Model
Lutron Lutron Lutron Lutron Lutron Lutron Lutron Lutron Lutron Lutron Lutron
D-600R DNG-600P CN-600P CN-603P NT-603P GL-600P D-600R DNG-600P CN-600P CN-603P NT-603P Dimmer
Brand
Model
GLIPSAL Levtion Lutron Simens
EV51RF250 BME04-2L LSSI-501H-FAN 5TG0752-1N1C
Dimming Test @ 120VAC, 60HZ Electronic Dimming Range (100%) 7 Transformers Number of Lamp Model Min Max 1 1.8 100 1 2.7 100 B+L 1 6.2 100 Technologies 1 6.7 100 FX95100 1 9.3 100 1 5.4 100 1 2.1 100 1 2.6 100 Lightech 1 7.6 100 LET60LW 1 7.5 100 1 4.4 100 Dimming Test @ 230VAC, 50HZ Electronic Dimming Range (100%) 7 Transformers Number of Lamp Model Min Max
Philips ET-E60
1 1 1 1
4.4 20.2 20 2.6
Note
*
* * * * *
Note
100 100 100 100
* * * *
* The test results were achieved by using the TRIAC Dimmer mentioned above for only one lamp, it may flicker by using one TRIAC Dimmer for multiple lamps, the compatibility of other dimmers and electronic transformers may need further testing. Lamp may flicker in lower dimming range.
6 7
This product may be compatible with some dimmers, specific dimming performance should be tested, above test is for reference only. The percentage of minimum and maximum values of the power.
CALL 1-714-545-5560
FAX 1-714-545-6093
VISIT W: WWW.WAMCOINC.COM
EMAIL E:
[email protected]
LED MR-16 Lamp Cost Savings (example) Reference Product Description
Similar Halogen Product
WL-L04MR16-W35NF-D
35W halogen lamp
Watts Saved 31W
Cost Saved After 1 Year
Cost Saved After 2 Years
Cost Saved After 5 Years
$12.40
$24.80
$62.00
* Base on the assumption of 10 hours/day and an energy cost of $0.11/kWh
Packaging Information 8 Lamp Type
Dimensions (in)
Gross Weight (lbs)
Net Weight (lbs)
Quantity/Carton
WL-L04MR16
15.2 * 8.9 * 6.5
9.3
6.1
56
Warranty Information Products are warranted for a period of three (3) years For complete terms and conditions, please check http://www.wamcoinc.com/terms.aspx
CALL 1-714-545-5560
FAX 1-714-545-6093
VISIT W: WWW.WAMCOINC.COM
EMAIL E:
[email protected]