Konica Minolta bizhub PRO 950 Specification & Installation Guide 4/2009
bizhub 950 Specifications Type
Console type
Copying system
Laser electrostatic transfer method (dual beam)
Original glass
Stationary
Photoconductor
OPC
Light source
Xenon lamp
Developing method
Dry-type dual-component reverse magnetic brush developing
Fixing method
Heat roller
Density adjustment
Automatic and manual (9 levels), Preset density (2 types)
Magnification ratio
1:1 ± 1.0% or less Enlargement: ×1.214 (121.4%), ×1.294 (129.4%), ×1.545 (154.5%), ×2.000 (200.0%) Reduction: ×0.939 (93.9%), ×0.772 (77.2%), ×0.647 (64.7%), ×0.500 (50.0%) Minimal: ×0.930 (93.0%) (fixed) XY Zoom (interlocked and individual): 0.250 to 4.000 (25.0%–400.0%) (in 0.001 increments) User-set zoom ratio: 3
Resolution
600 dpi
Copy paper
Tray 1, 2, 3: 11 to 57 lb. bond (216 g/m2) Bypass Tray: 11 to 65 lb. bond (244 g/m2) Any tray using Embossed setting: 14 to 57 lb. bond (216 g/m2) LCT: 11 to 80 lb. bond (300 g/m2) NOTE: Ink-jet paper is unavailable.
Copying speed
95 copies/min. (8.5" × 11"), 76 copies/min. (8.5" × 11"R), 63 copies/min. (8.5" × 14"), 54 copies/min. (11" × 17"), 92 copies/min. (5.5" × 8.5", 5.5" × 8.5"R)
Set quantity
1 to 9999 sheets or 1 to 9999 sets
Memory
256 MB (RAM) + 30 GB (HDD)
Original document
Type: sheets/ books (using original glass) Size: 11.93" × 18.11" (303 mm × 460 mm) maximum
Copy size
Max. 12.36" × 18.11" (314 × 460 mm) – 3.94" × 5.83" (Min. 100 × 148 mm) Image loss: leading and trailing edges 2.0 mm ± 2.0 mm, front and rear 1.5 mm ± 1.5 mm
Tray capacity
Bypass tray: 150 sheets (21 lb. paper) Main body trays 1 and 2 (universal tray): 500 sheets (21 lb. paper) Main body trays 3 (universal tray): 1,000 sheets (21 lb. paper)
Warm-up time
Approx. 5.5 minutes
First-page copy time Approx. 3.1 seconds (8.5" x 11") Sound power level
Main body: 79 dB (operating)/ 58 dB (standby)
Power requirements AC 208–240 V, 16 A, 60 Hz Power consumption 3.66 KW or less (with full options) Weight Approx.
628.3 lbs. (Main body + ADF)
Dimensions
Main body + ADF 39.25" (W) x 30.7" (D) x 47.4" (H) Main body + ADF + LU-407 + FS-611 + MK-721 + TU-502 132.75" (W) x 30.7" (D) x 47.4 (H)
Space requirements Main body + ADF + LU-407 + FS-611 + MK-721 + TU-502 144.6" (W) x 76" (D) 7.87" (200 mm) or more on the back 5.91" (100 mm) or more on both sides
Duty Cycle Up to 750,000. Maximum monthly print volume supported under standard vendor supplied service. Defines the upper end of the expected customer volume for the device. Customers should consider multiple machines if average monthly volume approaches duty cycle on a continual basis.
1
Konica Minolta bizhub PRO 950 Specification & Installation Guide Space Requirements Allow sufficient space for facilitating copy operation, changing parts, and periodic inspection. Leave adequate space behind the machine to let hot air out from the rear fan. The whole machine can weigh up to 1134.1 lb., depending on the combination of options. Be sure to choose a level and solid floor for the installation place.
5.9 (150)
11.6 5.9 (295) (150)
4.6 (116)
7.2 (183)
Unit:inches (mm) 37.4 (950)
38.6 (980)
26.6 (675)
30.7 (780)
7.9 (200)
55.9 (1420) 63.1 (1603)
47.4 (1203) 39.0 (990) 27.2 (690) 16.1 (410)
33.1 (840) 81.4 (2066) 93.2 (2366)
17.1 (435)
76.0 (1930)
bizhub PRO 950 + FS-528 + LU-407
5.9 (150)
11.6 (295)
4.6 (116) 26.6 (675)
5.9 (150)
7.2 (183)
Unit:inches (mm) 37.4 (950)
38.6 (980)
30.7(780)
55.9 (1420) 63.1 (1603)
47.4 (1203) 39.0 (990)
27.2 (690)
16.1 (410)
17.1 (435)
33.1 (840) 81.4 (2066) 93.2 (2366)
76.0 (1930)
bizhub PRO 950 + FS-611 + LU-407
5.9 (150)
4.6 (116) 26.6 (675)
15.8 (400)
6.6 (169) 38.6 (980)
Unit:inches (mm) 20.9 (530)
7.2 (183) 5.9 (150)
63.1 (1603) 55.9 (1420)
47.4 (1203) 27.4 (695)
16.1 (410)
33.1 (840) 97.3 (2470) 109.1 (2770)
26.4 (670)
bizhub PRO 950 + FS-528 + PI-506 + ZU-607 + LU-408
2
7.9 (200)
Konica Minolta bizhub PRO 950 Specification & Installation Guide Space Requirements
continued
7.2 (183) 5.9 (150)
35.4 (899)
15.8 (400)
Unit:inches (mm)
6.6(169)
4.6 (116) 26.6 (675)
5.9 (150)
20.9 (530)
38.6 (980)
63.1 (1603) 55.9 (1420)
47.4 (1203)
27.4 (695)
22.1 (562) 50.4 (1280)
16.1 (410) 132.7 (3369) 144.5 (3669)
33.1 (840)
26.4 (670)
bizhub PRO 950 + FS-611 + PI-506 + ZU-607 + LU-408 + MK-721 + TU-502
Environmental Requirements
Operation Precautions
Temperature
50° to 86° F
Humidity
10–80% RH
To ensure the optimum performance of this machine, observe the precautions described below.
Standby Noise
58 dBA
Power source
Operating Noise
79 dBA
The power source requirements are as follows:
Ozone Emission
< 0.02 mg/m3
• Voltage: 208V to 240V AC • Frequency: 60Hz q Use a power source with as little voltage or frequency fluctuations as possible.
Electrical Requirements NEMA Diagram for 6-20R
Operating environment
Line Options
Dedicated
Voltage
208-240V AC
Amperage
16 A
Cycles
60 Hz
• Operating temperature: 50°F to 86°F
NEMA Part No.
6-20R
• Humidity: 10% to 80%
Cord Length:
7.5 ft.
Note: The main electrical outlet must be located within 7.5 feet from the right rear corner of the bizhub PRO 950.
The environmental requirements for correct operation of the machine are as follows:
Storage of copies To store copies, follow the recommendation listed below: • Copies that are to be kept for a long time should be stored where they are not exposed to light or high temperature in order to prevent them from fading or sticking together. • Adhesive that contains solvent (e.g., spray glue) may dissolve the toner on copies.
3
Konica Minolta bizhub PRO 950 Specification & Installation Guide Component Considerations ADF Feeding speed
Single-sided: 95 sheets/min. (8.5" x 11") Double-sided: 68 sheets/min. (8.5" x 11")
Document types
Plain paper, 14 to 35 lb. (130 g/m2) (14 to 53 lb. using Single Feed mode for single-sided original)
Document sizes
Max. 11.69" x 17" (297 mm x 431.8 mm) Min. 5.04" x 5.5" (128 mm x 139.7 mm) Detectable sizes for Auto Paper mode: 11" x 17"L, 8.5" x 14"L, 8.5" x 11"L/P, 5.5" x 8.5"L/P, A3L, B4L, A4L/P, B5L/P, B6L Available to scan mixed originals of AB sizes and inch sizes
Feeder capacity
Max. 100 sheets (21 lb.)
Document insertion
Automatic feed
Weight
Approx. 48.5 lb.
Dimensions
25.6" (W) x 22.5" (D) x 6.7" (H)
Power source
Supplied from main body
Type
Stapler finisher Mountable options: Z folding unit, punch kit, post inserter
Exit trays
Primary (main) tray Secondary (sub) tray (for straight delivery only)
Function
Straight delivery: Output sorted/grouped sets normally to the primary (main) tray or secondary (sub) tray. Offset delivery: Output sorted/grouped sets to the primary (main) tray, having each set offset by approx. 30 mm upon exit. Staple delivery: Output stapled sets to the primary (main) tray
Paper types
Secondary (sub) tray: 11 to 80 lb. bond (300 g/m2) Primary (main) tray: 14 to 80 lb.; 15 to 65 lb. (244 g/m2) for Staple
Paper sizes
See paper section for details.
Stapler capacity
100 sheets max. (15 to 21 lb. paper) except for A3L and 11" x 17"L/ 50 sheets max. (22 to 28 lb. paper)
Staples in cartridge
5,000 staples
Dimensions
17.4" (W)* x 25.8" (D) x 39" (H)
Weight
Approx. 130 lb.
Power source
Supplied from main body
Finisher FS-528
* Effective size (width including Primary (main) tray) will be 27 in./32.5 in. (with the tray edge extended).
4
Konica Minolta bizhub PRO 950 Specification & Installation Guide Component Considerations Finisher FS-611 Type
Stapler finisher with folding function Mountable options: Z folding unit, punch kit, post inserter, trimmer unit
Exit trays
Primary (Main) tray (for finished output) Secondary (Sub) tray (for unfinished output) Folding mode tray (for folded output)
Function
Straight delivery: Output unfinished sets normally to the primary (main) tray Offset delivery: Output sorted/grouped sets to the primary (main) tray, having each set offset by approx. 30 mm upon exit. Sub tray delivery: Output unfinished sets normally to the secondary (sub) tray Staple delivery: Output stapled sets to the primary (main) tray Fold & Staple delivery: Output stapled (2 positions in the center) and folded sets to the folding mode tray Multi Half Fold delivery: Output folded sets to the folding mode tray Multi Tri-Fold delivery: Output tri-fold (up to 3 sheets) sets to the folding mode tray
Paper types
Secondary (sub) tray: 11 to 80 lb. bond (300 g/m2) Primary (main) tray: 14 to 80 lb.; 14 to 28 lb. for Staple Folding mode tray: 17 to 28 lb. for Fold & Staple and Multi Half Fold; 17 to 21 lb. (1 to 3 sheets)/ 22 to 28 lb. (1 sheet) for Multi Tri-Fold
Paper sizes
See paper section for details.
Stapler capacity
50 sheets max. (21 lb. paper) or 5.5 mm thick or less
Staples in cartridge
5,000 staples
Dimensions
16.2" (W)* x 25.8" (D) x 39"(H)
Weight
Approx. 150 lb.
Power source
Supplied from main body *Effective size (width including primary (main) tray) will be 26.6 in./31.2 in. (with the tray edge extended).
Punch Kit PK-505 Function
Punching file holes in copies
Number of punch holes
2 holes or 3 holes
Hole diameter
0.315" x 0.006" (8.0 ± 0.15 mm)
Hole pitch
2 holes: 2.756" ± 0.020" (70 ± 0.5 mm) 3 holes: 4.252" ± 0.020" (108 ± 0.5 mm)
Paper types
Plain paper: 16 to 24 lb. Thick paper: 25 to 35 lb. (130 g/m2) Special paper: OHP transparencies, labels
Paper sizes
2 holes: 11" x 17"L, 8.5" x 14"L, 8.5" x 11"L/P, 5.5" x 8.5"L/P, A3L, B4L, A4L/P, B5L/P, A5L/P 3 holes: 11" x 17"L, 8.5" x 11"L, A3L, B4L, A4P, B5P
Dimensions
5.8" (W) x 20" (D) x 4.8" (H)
Weight
Approx. 6.6 lb.
Power source
Supplied from finisher
5
Konica Minolta bizhub PRO 950 Specification & Installation Guide Component Considerations Post Inserter PI-506 Function
Cover sheet feeding into Finisher FS-528/FS-611
Structure
Double paper feeding unit (upper and lower)
Cover sheet types
14 to 53 lb. bond (200 g/m2) Special paper: OHP transparencies
Cover sheet sizes
See paper section for details.
Stack capacity
200 sheets max. or 30 mm thick or less
Dimensions
20.1' (W) x 24.4" (D) x 8.7" (H)
Weight
Approx. 23 lb.
Power source
Supplied from finisher
Function
Paper feeding into main body
Paper capacity
4,500 sheets (21 lb. paper)
Paper sizes
See paper section for details.
Paper types
11 to 80 lb. bond (300 g/m2) With paper type specified as Embossed: 14 to 57 lb. bond
Dimensions
16.9" (W) x 25.2" (D) x 27.2" (H)
Weight
Approx. 66 lb.
Power source
Supplied from main body
Function
Paper feeding into main body
Paper capacity
4,000 sheets (21 lb. paper)
Paper sizes
See paper section for details.
Paper types
11 to 80 lb. bond (300 g/m2) With paper type specified as Embossed: 14 to 57 lb. bond
Dimensions
26.4" (W) x 25.2" (D) x 27.4" (H)
Weight
Approx. 92.6 lb.
Power source
Supplied from main body
Large Capacity Unit LU-407
Large Capacity Unit LU-408
6
Konica Minolta bizhub PRO 950 Specification & Installation Guide Component Considerations Z Folding Unit ZU-607 Function
Punching file holes and Z-folding the output copies
Number of punch holes
2 or 3 holes
Hole diameter
0.315" ± 0.020" (8.0 ± 0.5 mm)
Hole pitch
2 holes: 2.756" ± 0.020" (70 ± 0.5 mm) 3 holes: 4.252" ± 0.020" (108 ± 0.5 mm)
Paper types in Punch mode 17 to 24 lb. bond Paper sizes in Punch mode See paper section for details. Fold types
Z-fold, Half fold (8.5" x 14" only)
Fold position (width from the edge to the first fold)
11 x 17"L: 8.46" (215 mm) or less 8.5" x 14"L: 10.30" (261.6 mm) or less A3L: 8.23" (209 mm) or less B4L: 7.13" (181 mm) or less
Paper type in Z-Fold mode
Plain paper: 16 to 24 lb. bond
Paper sizes in Z-Fold mode 11" x 17"L, 8.5" x 14"L, A3L, B4L Paper sizes other than listed above will be output without any fold. Dimensions
6.7" (W) x 26" (D) x 36.6" (H)
Weight
Approx. 83.8 lb.
Power source
Supplied from an outlet
Function
Trimming the end of booklet
Trimming width
0.39" (10 mm) or less
Number of trimmed sheets
40 sheets max. (21 lb. paper) in Fold & Staple mode (20-sheet-folded booklet or 19-sheet-folded booklet with 53 lb. (200 g/m2) paper cover) 6 sheets max. (21 lb. paper) in Multi Half Fold mode (3-sheet-folded booklet)
Paper types
15 to 28 lb. bond (Can be trimmed with a sheet of 53 lb. cover paper)
Paper sizes
See paper section for details.
Dimensions
45" (W) x 24" (D) x 22.1" (H)
Weight
Approx. 150 lb.
Power source
Supplied from an outlet
Trimmer Unit TU-502
Other Accessories PostScript Kit PS-504 Mount Kit MK-721 Staple Kit SK-701 Staple Kit MS-5C Toner Recycle Cut Kit RC-501 (Available as service parts) These specifications are subject to change without notice.
7
Konica Minolta bizhub PRO 950 Specification & Installation Guide Paper Information
Paper Weight
This machine is equipped with the following trays for loading copy paper:
Paper Trays
Paper Weight
Tray 1, 2 and 3 (Main body trays)
11 to 57 lb. bond
• Trays 1, 2, and 3 (Main body trays) • Tray 4 (Large capacity unit LU-407/LU-408) • Bypass Tray Also, the following equipment is provided for conveying/ processing/delivering copies: • ADU (Automatic Duplex Unit) • Finisher (FS-528/FS-611) • Post inserter (PI-506)
Bypass Tray
11 to 65 lb. bond
Tray 4 (Large Capacity Unit LU-407/LU-408)
11 to 80 lb. bond
Post Inserter PI-506 Upper/Lower tray (option for Finisher FS-528/FS-611)
14 to 53 lb. bond
Equipment
Paper Weight
Automatic Duplex Unit
15 to 57 lb. bond
Finisher FS-528
• Punch kit (PK-505)
Primary (main) tray
• Z folding unit (ZU-607) • Trimmer unit (TU-502)
Secondary 11 to 80 lb. bond (sub) tray
Finisher FS-611
14 to 80 lb. bond Staple: 14 to 65 lb. bond
Secondary 11 to 80 lb. bond (sub) tray Primary (main) tray
14 to 80 lb. bond Staple: 14 to 28 lb. bond Can be stapled with up to two cover sheets (53 lb.) attached.
Folding mode tray
Fold & Staple: 17 to 28 lb. bond Can be saddle-stitched with a cover sheet (53 lb.) attached. Multi Half Fold: 17 to 28 lb. bond Multi Tri-Fold of 1 sheet: 22 to 28 lb. bond Multi Tri-Fold of 1 to 3 sheets: 17 to 21 lb. bond
Punch Kit PK-505 (option for Finisher FS-528/FS-611)
17 to 35 lb. bond
Z Folding Unit ZU-607
Z-Fold: 15 to 24 lb. bond Punch: 17 to 24 lb. bond
Trimmer Unit TU-502
15 to 28 lb. bond Can be trimmed with a cover sheet (53 lb.) attached.
NOTE: Be sure to use paper only of the weight specified for the tray; otherwise copy quality may be deteriorated or machine trouble may occur. DETAIL: The setting or registration of paper weight to be specified for each paper tray is available in the Paper Setting from the Copy Screen or from the Machine Status Screen. As to the Paper Setting from the Machine Status Screen, see POD Administrator’s Reference. Selecting [Emboss] as paper type for trays 1 to 4 and bypass tray, available setting range will be limited to 14 to 57 lb. for all trays.
8
Konica Minolta bizhub PRO 950 Specification & Installation Guide Paper Tray/Exit Tray Capacity Paper Trays
Capacity
Tray 1/2 (Main body tray)
500 sheets (21 lb.)
Tray 3 (Main body tray)
1,000 sheets (21 lb.)
Bypass Tray
150 sheets (21 lb.) 1 sheet each for OHP transparencies
Tray 4 (Large Capacity Unit LU-407)
4,500 sheets (21 lb.)
Tray 4 (Large Capacity Unit LU-408)
4,000 sheets (21 lb.)
Post Inserter PI-506 Upper/ Lower tray (option for Finisher FS-528/FS-611)
200 sheets (21 lb.) or within 30 mm thick
Equipment
Capacity
Automatic Duplex Unit Finisher FS-528
Finisher FS-611 (continued)
Capacity Folding mode tray
Primary (main) tray (Staple)
Unlimited
750 sheets (21 lb.) (5.5" x 8.5"L/P, A5L/P, B6L) 3,000 sheets (21 lb.) (8.5" x 11"L/P, 9" x 11"P, A4L/P, B5L/P) 1,500 sheets (21 lb.) (11" x 17"L, 8.5" x 14"L, SRA4L, A3L, B4L, Foolscap, wide paper)
Z Folding Unit ZU-607
Max. 100 sheets (21 lb.) per set Adjust the set count according to the number of stapled sheets.
Punch Kit PK-505 (option for Finisher FS-528/FS-611)
Secondary 200 sheets (21 lb.) (sub) tray Primary (main) tray (normal)
Primary (main) tray (Staple)
Max. folded & stapled sheets: 20 sheets (17 to 28 lb.)/ 19 sheets (17 to 28 lb.)/ 1 sheet (53 lb.)/ Multi Half Fold: 33 sets for 3-sheet-folded booklet (99 sheets, 396 pages) (25 sets for 8.5" x 11"L, A4L) Fold & Staple: 20 sets for 5-sheet-folded booklet (100 sheets, 400 pages) (15 sets for 8.5" x 11"L, A4L) Fold & Staple: 5 sets for 20-sheet-folded booklet (100 sheets, 400 pages) Max. folded sheets in Multi Tri-Fold: 3 sheets (17 to 21 lb. bond)/1 sheet (22 to 28 lb. bond) Multi Tri-Fold: 50 sets for 1-sheet-folded set
Secondary 200 sheets (21 lb.) (sub) tray Primary (main) tray (normal)
Finisher FS-611
Equipment
Punch: Unlimited (operated for each one of output sheets) Z-Fold: 1 sheet only Up to 5 Z-folded sheets can be included in a stapled set. See the table on page 10 for details of Z-folded and non-folded sheet count in a stapled set, as well as the primary tray capacity.
Unlimited (operated for each one of output sheets)
DETAIL: Output capacity of Finisher FS-528 may vary depending on the paper type. NOTE: Primary (main) tray capacity depends on the paper size and number of stapled sheets. See the table below for guidelines.
500 sheets (21 lb.) (5.5" x 8.5"L/P, A5L/P, B6L) 2,500 sheets (21 lb.) (8.5" x 11"L/P, 9" x 11"P, A4L/P, B5L/P) 1,500 sheets (21 lb.) (11" x 17"L, 8.5" x 14"L, SRA4L, A3L, B4L, Foolscap, wide paper) Max. 50 sheets (14 to 21 lb.) per set Max. 30 sheets (22 to 28 lb.) per set Adjust the set count according to the number of stapled sheets. continued
Primary (Main) Tray Capacity in Staple Mode Using Finisher FS-528 No. of Stapled Sheets
8.5" x 11"L/P, 5.5" x 8.5"P (B4L, A4L/P, B5P, A5P)
11" x 17"L (A3L)
2–9
100 Sets
50 Sets
10 – 20
50
50
21 – 30
30
30
31 – 40
25
25
41 – 50
20
20
51 – 60
15
—
61 – 100
10
—
9
Konica Minolta bizhub PRO 950 Specification & Installation Guide Paper Tray/Exit Tray Capacity
continued
Primary (Main) Tray Capacity in Staple Mode Using Finisher FS-611 No. of Stapled Sheets
8.5" x 11"L/P, 5.5" x 8.5"P (B4L, A4L/P, B5P, A5P)
11" x 17"L (A3L)
2–9
100 Sets
50 Sets
10 – 20
50
50
21 – 30
30
30
31 – 40
25
25
41 – 50
20
20
NOTE: See the following tables for tray capacity in Z-Fold with Staple mode.
Primary (Main) Tray Capacity in Z-Fold with Staple Mode Using Finisher FS-528/FS-611 Available Sheet Count in One Stapled Set
Primary (Main) Tray Capacity
Z-Folded Sheets
Regular Sheets
1 Sheet
1 – 40 Sheets
20 Stapled Sets
2 Sheets
0 – 30
10
3
0 – 20
4
4
0 – 10
3
0
2
5 6 or more
10
Staple is unavailable with Z-Fold
Konica Minolta bizhub PRO 950 Specification & Installation Guide Paper Size Note: The machine will automatically detect an appropriate standard size for trays 1 to 3 and bypass tray specified as Standard in Paper Setting. Wide paper is not fixed in size. When using wide paper, be sure to specify actual dimensions in Size Setting.
Paper Trays
Available Size
Tray 1, 2 and 3 (Main body trays)
STANDARD: 11" x 17"L, 8.5" x 14"L, 8.5" x 11"L/P, 9" x 11"P, Foolscap, 5.5" x 8.5"P, SRA4L, A3L, B4L*, A4L/P, B5L/P*, A5P
Paper Trays
Available Size
Tray 4 (Large Capacity Unit LU-407)
STANDARD: 8.5" x 11"P, 9" x 11"P, A4P, B5P*, 8KP CUSTOM: Max. 12.36" x 9.02" (314 mm x 229 mm) to min. 9.84" x 6.93" (250 mm x 176 mm) WIDE PAPER: 8.5" x 11"WP, A4WP, B5WP TAB PAPER: 8.5" x 11"TP, A4TP, B5TP TAB PAPER (Custom Size): Max. 12.36" x 9.02" (314 mm x 229 mm) to min. 9.84" x 6.93" (250 mm x 176 mm)
*B4 and B5 are JIS sizes. To change them to ISO sizes, contact your service representative.
Available to detect A5P instead of 5.5" x 8.5"P. Available to detect A4L instead of 8.5" x 11"L. Available to detect Foolscap or SRA4L instead of 8.5" x 14"L. Available to detect 9" x 11"L instead of 8.5" x 11"P. CUSTOM: Max. 12.36" x 17.52" (314 mm x 445 mm) to min. 7.17" x 5.51" (182 mm x 140 mm) WIDE PAPER: 11" x 17"WL, 8.5" x 11"WL/P, 5.5" x 8.5"WP, A3WL, B4WL, A4WL/P, B5WL/P, A5WP TAB PAPER: 11" x 17"TL, 8.5" x 11"TL/P, 5.5" x 8.5"TP, A3TL, B4TL, A4TL/P, B5TL/P, A5TP TAB PAPER (Custom Size): Max. 12.36" x 17.52" (314 mm x 445 mm) to min. 7.17" x 5.51" (182 mm x 140 mm) Bypass Tray
STANDARD: 11" x 17"L, 8.5" x 14"L, 8.5" x 11"L/P, 9" x 11"P, Foolscap, 5.5" x 8.5"L/P, SRA4L, A3L, B4L*, A4L/P, B5L/P*, A5L/P, B6L
* B5P is JIS size. To change it to ISO size, contact your service representative.
Tray 4 (Large Capacity Unit LU-408)
STANDARD: 11" x 17"L, 8.5" x 14"L, 8.5" x 11"L/P, 9" x 11"P, Foolscap, SRA4L, A3L, B4L*, A4L/P * B4L is JIS size. To change it to ISO size, contact your service representative.
CUSTOM: Max. 12.36" x 18.11" (314 mm x 460 mm) to min. 7.68" x 7.99" (195 mm x 203 mm) WIDE PAPER: 11" x 17"WL, 8.5" x 11"WL/P, A3WL, B4WL, A4WL/P TAB PAPER: 11" x 17"TL, 8.5" x 11"TL/P, A3TL, B4TL, A4TL/P TAB PAPER (Custom Size): Max. 12.36" x 18.11" (314 mm x 460 mm) to min. 7.68" x 7.99" (195 mm x 203 mm) continued
*B4L and B5L/P are JIS sizes. To change them to ISO sizes, contact your service representative.
Available to detect A5L instead of 5.5" x 8.5"P. Available to detect A4L instead of 8.5" x 11"L. Available to detect Foolscap or SRA4L instead of 8.5" x 14"L. Available to detect 9" x 11"P instead of 8.5" x 11"P. Available to detect A5L or B6L instead of 5.5" x 8.5"L. CUSTOM: Max. 12.36" x 18.11" (314 mm x 460 mm) to min. 3.94" x 5.51" (100 mm x 140 mm) WIDE PAPER: 11" x 17"WL, 8.5" x 11"WL/P, 5.5" x 8.5"WL/P, A3WL, B4WL, A4WL/P, B5WL/P, A5WL/P TAB PAPER: 11" x 17"TL, 8.5" x 11"TL/P, 5.5" x 8.5"TL/P, A3TL, B4TL, A4TL/P, B5TL/P, A5TL/P TAB PAPER (Custom Size): Max. 12.36" x 18.11" (314 mm x 460 mm) to min. 3.94" x 5.51" (100 mm x 140 mm)
11
Konica Minolta bizhub PRO 950 Specification & Installation Guide Paper Size Equipment Post Inserter PI-506 (option for Finisher FS-528/FS-611)
Available Size Upper Tray
Lower Tray
Automatic Duplex Unit
Finisher FS-528
Equipment
continued
STANDARD: 8.5" x 11"L/P, 9" x 11"P, 5.5" x 8.5"P, A4L/P, B5L/P CUSTOM: Max. 8.5" x 11.7" (216 mm x 297 mm) to min. 7.17" x 5.47" (182 mm x 139 mm) WIDE PAPER: 8.5" x 11"WL/P, 5.5" x 8.5"WP, A4WL/P, B5WL/P TAB PAPER: 8.5" x 11"TL/P, 5.5" x 8.5"TP, A4TL/P, B5TL/P TAB PAPER (Custom Size): Max. 8.5" x 11.7" (216 mm x 297 mm) to min. 7.17" x 5.83" (182 mm x 148 mm)
Finisher FS-528 (continued)
STANDARD: 11" x 17"L, 8.5" x 14"L, 8.5" x 11"L/P, 9" x 11"P, Foolscap, 5.5" x 8.5"P, SRA4L, A3L, B4L, A4L/P, B5L/P, A5P, B6L*1, A6L*1 *1 B6L and A6L are available in straight delivery only.
CUSTOM*2: Max. 12.36" x 18.11" (314 mm x 460 mm) to min. 7.17" x 5.83" (182 mm x 148 mm) *2 Max. 12.36" x 18.11" (314 mm x 460 mm) to min. 5.04" x 5.83" (128 mm x 148 mm) in straight delivery only.
WIDE PAPER: 11" x 17"WL, 8.5" x 11"WL/P, 5.5" x 8.5"WP, A3WL, B4WL, A4WL/P, B5WL/P, A5WP TAB PAPER: 11" x 17"TL, 8.5" x 11"TL/P, 5.5" x 8.5"TP, A3TL, B4TL, A4TL/P, B5TL/P, A5TP TAB PAPER (Custom Size): Max. 12.36" x 18.03" (314 mm x 458 mm) to min. 7.17" x 5.51" (182 mm x 140 mm)
STANDARD: 12" x 18"L, 11" x 17"L, 8.5" x 14"L, 8.5" x 11"L/P, 9" x 11"P, 5.5" x 8.5"P, SRA4L, A3L, B4L, A4L/P, B5L/P, A5P CUSTOM: Max. 12.36" x 18.03" (314 mm x 458 mm) to min. 7.17" x 5.47" (182 mm x 139 mm) WIDE PAPER: 11" x 17"WL, 8.5" x 11"WL/P, 5.5" x 8.5"WP, A3WL, B4WL, A4WL/P, B5WL/P, A5WP TAB PAPER: 11" x 17"TL, 8.5" x 11"TL/P, 5.5" x 8.5"TP, A3TL, B4TL, A4TL/P, B5TL/P, A5TP TAB PAPER (Custom Size): Max. 12.36" x 18.03" (314 mm x 458 mm) to min. 7.17" x 5.83" (182 mm x 148 mm)
Primary (main) tray (Staple)
Max. 12.36" x 18.11" (314 mm x 460 mm) to min. 3.94" x 5.51" (100 mm x 140 mm) Tab paper cannot be used. Secondary STANDARD: (sub) tray 11" x 17"L, 8.5" x 14"L, 8.5" x 11"L/P, 9" x 11"P, Foolscap, 5.5" x 8.5"L/P, SRA4L, A3L, B4L, A4L/P, B5L/P, A5L/P, B6L, A6L CUSTOM: Max. 12.36" x 18.03" (314 mm x 458 mm) to min. 3.94" x 5.83" (100 mm x 148 mm) WIDE PAPER: 11" x 17"WL, 8.5" x 11"WL/P, 5.5" x 8.5"WP, A3WL, B4WL, A4WL/P, B5WL/P, A5WP TAB PAPER: 11" x 17"TL, 8.5" x 11"TL/P, 5.5" x 8.5"TP, A3TL, B4TL, A4TL/P, B5TL/P, A5TP TAB PAPER (Custom Size): Max. 12.36" x 17.52" (314 mm x 445 mm) to min. 7.17" x 5.51" (182 mm x 140 mm)
Available Size Primary (main) tray (normal)
Finisher FS-611
STANDARD: 11" x 17"L, 8.5" x 14"L, 8.5" x 11"L/P, 9" x 11"P, Foolscap, 5.5" x 8.5"P, SRA4L, A3L, B4L, A4L/P, B5L/P, A5P CUSTOM: Max. 8.27" x 11.7" (210 mm x 297 mm) to min. 7.17" x 5.83" (182 mm x 148 mm) WIDE PAPER: 11" x 17"WL, 8.5" x 11"WL/P, 5.5" x 8.5"WP, A3WL, B4WL, A4WL/P, B5WL/P, A5WP TAB PAPER: 11" x 17"TL, 8.5" x 11"TL/P, 5.5" x 8.5"TP, A3TL, B4TL, A4TL/P, B5TL/P, A5TP TAB PAPER (Custom Size): Max. 8.27" x 11.7" (210 mm x 297 mm) to min. 7.17" x 5.83" (182 mm x 148 mm)
Secondary STANDARD: (sub) tray 11" x 17"L, 8.5" x 14"L, 8.5" x 11"L/P, 9" x 11"P, Foolscap, 5.5" x 8.5"L/P, SRA4L, A3L, B4L, A4L/P, B5L/P, A5L/P, B6L, A6L CUSTOM: Max. 13.03" x 17.63" (331 mm x 448 mm) to min. 3.94" x 5.83" (100 mm x 148 mm) WIDE PAPER: 11" x 17"WL, 8.5" x 11"WL/P, 5.5" x 8.5"WP, A3WL, B4WL, A4WL/P, B5WL/P, A5WP TAB PAPER: 11" x 17"TL, 8.5" x 11"TL/P, 5.5" x 8.5"TP, A3TL, B4TL, A4TL/P, B5TL/P, A5TP TAB PAPER (Custom Size): Max. 13.03" x 17.63" (331 mm x 448 mm) to min. 3.94" x 5.83" (100 mm x 148 mm) continued
12
Konica Minolta bizhub PRO 950 Specification & Installation Guide Paper Size Equipment Finisher FS-611 (continued)
Equipment
continued
Available Size Primary (main) tray (normal)
STANDARD: 11" x 17"L, 8.5" x 14"L, 8.5" x 11"L/P, 9" x 11"P, Foolscap, 5.5" x 8.5"L/P*1, SRA4L, A3L, B4L, A4L/P, B5L/P, A5L/P*1, B6L*1 *1 5.5" x 8.5"L, A5L and B6L are available in straight delivery only.
CUSTOM*2: Max. 12.36" x 18.03" (314 mm x 458 mm) to min. 7.17" x 5.83" (182 mm x 148 mm) *2 Max. 12.36" x 18.03" (314 mm x 458 mm) to min. 5.04" x 5.83" (128 mm x 148 mm) in straight delivery only.
WIDE PAPER: 11" x 17"WL, 8.5" x 11"WL/P, 5.5" x 8.5"WP, A3WL, B4WL, A4WL/P, B5WL/P, A5WP TAB PAPER: 11" x 17"TL, 8.5" x 11"TL/P, 5.5" x 8.5"TP, A3TL, B4TL, A4TL/P, B5TL/P, A5TP TAB PAPER (Custom Size): Max. 12.36" x 18.03" (314 mm x 458 mm) to min. 7.17" x 5.83" (182 mm x 148 mm) Primary (main) tray (Staple)
Folding mode tray
STANDARD: 11" x 17"L, 8.5" x 14"L, 8.5" x 11"L/P, 9" x 11"P, Foolscap, 5.5" x 8.5"P, SRA4L, A3L, B4L, A4L/P, B5L/P, A5P CUSTOM: Max. 12.36" x 18.03" (314 mm x 458 mm) to min. 7.17" x 5.83" (182 mm x 148 mm) WIDE PAPER: 11" x 17"WL, 8.5" x 11"WL/P, 5.5" x 8.5"WP, A3WL, B4WL, A4WL/P, B5WL/P, A5WP TAB PAPER: 11" x 17"TL, 8.5" x 11"TL/P, 5.5" x 8.5"TP, A3TL, B4TL, A4TL/P, B5TL/P, A5TP TAB PAPER (Custom Size): Max. 12.36" x 18.03" (314 mm x 458 mm) to min. 7.17" x 5.83" (182 mm x 148 mm) STANDARD: 11" x 17"L, 8.5" x 14"L, 8.5" x 11"L, SRA4L, A3L, B4L, A4L (8.5" x 11"L and A4L only for Multi Tri-Fold) CUSTOM: Max. 12.36" x 18.03" (314 mm x 458 mm) to min. 8.27" x 11.02" (210 mm x 280 mm) WIDE PAPER: 11" x 17"WL, 8.5" x 11"WL, A3WL, B4WL, A4WL continued
Available Size
Z Folding Unit ZU-607 STANDARD: 11" x 17"L, 8.5" x 14"L*1, A3L, B4L*2 *1 Double fold for 8.5" x 14"L only. Any other sizes than the above mentioned will be output without folded. *2 Z-Fold and Staple modes are available in combination for A3L and A4L mixed, while they cannot be used for B4L and B5L mixed.
Trimmer Unit TU-502 STANDARD: 11" x 17"L, 8.5" x 14"L, 8.5" x 11"L, SRA4L, A3L, B4L, A4L WIDE PAPER: 11" x 17"WL, 8.5" x 11"WL, SRA4WL, A3WL, B4WL, A4WL * Without Trimming selected, available sizes will be the same as those in Folding mode tray.
Special Paper in Bypass Tray Bypass tray accepts the following special paper type that cannot be loaded in the main body trays. • OHP transparencies • Tracing paper CAUTION: Do not use paper with staples or paper that conducts electricity (silver, carbon, etc.) REMINDER: To avoid machine trouble, do not use heat-sensitive paper, colored OHP transparencies, or paper specifi cally designed for ink-jet printer, such as photo-paper.
Auto Tray Switch Function If the selected paper tray runs out of paper while a job is being printed and a different paper tray is loaded with paper meeting the following conditions, the other paper tray is automatically selected so printing can continue. If the optional Large Capacity Unit LU-407 is installed, a maximum of 7,350 copies can be made continuously. (The paper tray is automatically switched only if the "ATS Permit" in Utility mode is set to "On".)
Operating Conditions (Set the following condition at “02 Function Setting – 01 Feed Tray Setting” in Utility mode.) • Select the paper trays to be selected automatically by “01 Feed Tray Auto Selection”. • Select "On" at “02 ATS Permit” • Select the paper type setting of the tray which is automatically selected when ATS functions at “03 Auto Paper Type”
Load the following paper into the paper trays. • The same size in the same orientation. • The same paper type.
To Store Copy Paper Observe the following precautions when storing the paper. • Store paper in a cool, dry area. Using damp paper may cause a paper misfeed. • Keep partially used packages tightly wrapped during storage. • Do not place paper packages vertically to store. Paper curl due to vertical storage may cause paper misfeeds.
13
Konica Minolta bizhub PRO 950 Specification & Installation Guide Original Information
ADF Originals
When making copies, position the original into the ADF or on the original glass. To copy originals that cannot be positioned into the ADF, position them on the original glass.
Following four modes are provided when using the ADF to scan originals. • Normal mode • Mixed mode
Using Original Glass
• Z-Folded Original mode
Use the original glass when originals are not suitable for use with the document feeder, e.g., when size is incompatible, or when originals are folded, stapled, torn, or in generally poor condition.
• Single Feed mode
Unsuitable ADF originals
NORMAL MODE:
Specifications for each mode are described as follows. DETAIL: Detectable original size can be selected from AB series, Inch series, only. A series, and AB series and Inch series mixed by the administrator.
The following types of original should not be positioned into the ADF, otherwise paper misfeeds, damage to the original or machine trouble may occur.
Item
Description
Detectable original size 11" x 17"L, 8.5" x 14"L, 8.5" x 11"L/P, 5.5" x 8.5"L/P, A3L, B4L, A4P, B5L/P, Foolscap
• Wrinkled, folded, curled, or torn originals • Highly translucent or transparent originals, such as overhead transparencies or trace paper
Original weight
16 to 35 lb. Bond (50 g/m2 to 130 g/m2)
Original size
5.0" x 5.5" to 11.7" x 17.0" (128 mm x 139.7 mm to 297 mm x 431.8 mm)
Feeder capacity
100 sheets (21 lb. Bond)
Curling tolerance
10 mm or less
Original placement
Face up
• Coated originals such as carbon-backed paper • Originals printed on paper thicker 53 lb. Bond (200 g/m2) 2
• Originals printed on paper thinner than 14 lb. Bond (50 g/m ) • Originals that are bound, for example, with staples or paper clips • Originals that are bound in a book or booklet
MIXED MODE: Use Mixed mode to copy mixed size originals.
• Originals that are bound together with glue
Item
Description
• Originals pages that have been cut or contain cutouts
Detectable original size
Two types of size combination are determined by the ADF guide width. 11" x 17"L, 8.5" x 14"L, 8.5" x 11"P, and 5.5" x 8.5"P mixed, 8.5" x 14"L, 8.5" x 11"L/P and 5.5" x 8.5"P mixed.
• Originals with binder holes
Original weight
16 to 35 lb. Bond (50 g/m2 to 130 g/m2)
• Originals that have just been printed with this machine
Feeder capacity
100 sheets (21 lb. Bond)
Curling tolerance
10 mm or less
Original placement
Face up
• Label sheets • Offset printing masters
Specifications for originals using original glass Item
Description
Original size
Max. 8.23" x 16.54" (209 mm x 420 mm)
Detectable original size
11" x 17"L, 8.5" x 14"L, 8.5" x 11"L/P, 5.5" x 8.5"L/P
Original weight
15 lb. or less
Original thickness
1.2" or less
DETAIL: Detectable original size can be changed from Inch series to AB series, only A series, or AB series and Inch series mixed by the administrator. DETAIL: One of the small sizes A5L, B6L, 5.5" x 8.5"L, A4P, and 8.5" x 11"P can be specifi ed as a detectable size. CAUTION: The original glass is fragile. Do not place heavy originals, or do not press strongly when thick original is placed and is under pressure of ADF, otherwise the glass may be broken and you may be injured.
14
NOTE: See below for the guide width of each combination.
Guide width
8.5"x11" 11"x17"
Guide width
5.5"x 8.5"x 8.5" 11"
Konica Minolta bizhub PRO 950 Specification & Installation Guide ADF Originals
continued
Z-FOLDED ORIGINAL MODE: Use Z-Folded Original mode to scan folded originals without using the size detection sensor of the ADF. Item
Description
Detectable original size
11" x 17"L, 8.5" x 14"L, 8.5" x 11"L/P, 5.5" x 8.5"L/P, A3L, B4L, A4P, B5L/P
Original weight
16 to 35 lb. Bond (50 g/m2 to 130 g/m2)
Original size
5.0" x 5.5" to 11.7" x 17.0" (128 mm x 139.7 mm to 297 mm x 431.8 mm)
Feeder capacity
100 sheets (21 lb. Bond)
Curling tolerance
10 mm or less
Original placement
Face up; orientation same as copy paper
SINGLE FEED MODE: Use Single Feed mode to copy thick originals to be fed one sheet at a time in the ADF. Item
Description
Detectable original size
11" x 17"L, 8.5" x 14"L, 8.5" x 11"L/P, 5.5" x 8.5"L/P, A3L, B4L, A4P, B5L/P
Original weight
16 to 53 lb. Bond (50 g/m2 to 200 g/m2)
Original size
5.0" x 5.5" to 11.7" x 17.0" (128 mm x 139.7 mm to 297 mm x 431.8 mm)
Feeder capacity
1 sheet at a time
Curling tolerance
10 mm or less
Original placement
Face up
15
Konica Minolta bizhub PRO 950 Specification & Installation Guide Product Specifications
Network Function
Type:
Printing Method
Pserver (IPX/SPX)/LPD/LPR (TCP/IP) IPP (TCP/IP) AppleTalk (EtherTalk) Bonjour (TCP/IP) Web Service Print (TCP/IP)/NPrinter RPrinter (IPX/SPX) RAW Port (TCP/IP)
Print Utilities
EMS Plug-in, PageScope Direct Print (TIFF/PDF (PDF 1.6 support) Direct Print utility)
Compliant Web Browser
Microsoft Internet Explorer 6 or later* recommended (JavaScript enabled) Mozilla Firefox 1.0 or later (JavaScript enabled, Cookies enabled) Netscape Navigator 7.02 or later (JavaScript enabled, Cookies enabled) Flash Player Ver 7.0 or later (In the case of seeing in Flash form)
Built-in box type for the Konica Minolta bizhub PRO 950 main body
Functions Resolution
Printing System 600 x 600 dpi Scanning Resolution 200 dpi/300 dpi/ 400 dpi/600 dpi
Gradation
Binary
Printable Area
Margin 2.8 2 mm (left, right, top and bottom without variation)
No. of Print
1 to 9999
Continuous Print Speed
95 ppm (A4, 8.5 x 11) (From the 2nd and succeeding copies)
Printer Description Language
PCL5r/6 PostScript3
Printer Driver
PCL6 (KONICA MINOLTA product) • Windows 2000 Professional (SP3 later)/Server • Windows XP Home Editions/ Professional (SP2 later) • Windows Server 2003 Standard • Windows Vista (all versions) (include the XP (Professional)/ Server 2003/Vista x64) POSTSCRIPT3 PLUG-IN DRIVER (optional PS expansion kit required)
• Windows 2000 Professional (SP3 later)/Server • Windows XP Home Editions/ Professional (SP2 later) • Windows Server 2003 Standard • Windows Vista (all versions) • Mac OS X 10.3/10.4/10.5 (include the Intel Mac 10.4/10.5) (include the XP (Professional)/ Server 2003/Vista x64) POSTSCRIPT3 PPD DRIVER (optional PS expansion kit required)
• Windows 2000 Professional (SP3 later)/Server • Windows XP Home Editions/ Professional (SP2 later) • Windows Server 2003 Standard • Windows Vista (all versions) • Mac OS X 10.3/10.4/10.5 (include the Intel Mac 10.4/10.5) (include the XP (Professional)/ Server 2003/Vista x64)
16
* Microsoft XML Parser (MSXML)3.x must be installed when using Internet Explorer 5.5.
Machine Data CPU
Pentium M 2.0 GHz
System Memory
2 GB
Host Interface
Ethernet, USB
Power
From main body (bizhub PRO 950)
Network Interface
Ethernet (1000Base-T/100Base-TX/10Base-T)
Frame Type
IEEE 802.2/802.3/Ethernet II/ IEEE 802.3 SNMP
Network Connector
RJ-45
FS-528
TU-502
PK-505
MK-721
PI-506
(50-sheet Stapling, Half-fold, Tri-fold, Saddle-stitch Booklets)
FS-611 Booklet Finisher
- OR -
(Staple up to 100 sheets with staple cutting function)
FS-528 Stapling Finisher
Step 2a: Output Options (One of the following is required)
FS-611
LU-408 Large Capacity Unit (4,000 sheets up to 12" x 18")
LU-407 Large Capacity Unit (4,500 sheets Letter Portrait)
Step 1: Paper Supply Options
bizhub PRO 950 comes standard with: EDH, 30 GB HD, 256 MB memory, Embedded Image Controller with 2 GB Memory and 80 GB HDD (includes PCL5e/XL (PCL6) and TIFF Direct Print); Tray 1 (500 sheets), Tray 2 (500 sheets), Tray 3 (1,000 sheets), Bypass (150 sheets), Total standard paper capacity: 2,150 sheets (6,650 max).
bizhub PRO 950 Base Unit
ZU-607
3
2
1
(Includes Adobe PS3 and PDF Direct Print)
PS-504 Adobe PostScript Option
Step 3: Connectivity Option
4,500
LU-407
4,000
LU-408
30 GB HDD (Copier) (Standard)
256 MB Memory (Standard)
PostScript3 (Optional)
Image Controller (Standard) includes 2 GB Memory, 80 GB HDD, PCL
ZU-607 Z-Fold/Punch Kit (for either FS-611 or FS-528)
PK-505 Punch Kit (for either FS-611 or FS-528)
TU-502 Trimmer (for FS-611) (requires MK-721 Mount Kit)
PI-506 Post Process Inserter (for either FS-611 or FS-528)
Step 2b: Additional Output Options
500 500 1,000
Start:
Konica Minolta bizhub PRO 950
Specification & Installation Guide
How to Build a System for the bizhub 950 Printer/Copier/Scanner (from start to finish)
17
Konica Minolta bizhub PRO 950 Specification & Installation Guide Accessory Options for bizhub 950 Printer/Copier/Scanner ACCESSORIES
ITEM NO.
DESCRIPTION
NOTES
A0Y5011
bizhub PRO 950 Digital Printer/Copier/Scanner
Includes EDH, 256 MB memory, 30 GB HDD, Embedded Image Controller with 2 GB Memory, 80 GB HDD, PCL5e/XL (PCL6), TIFF Direct Print, Scan-to-HDD, Email, FTP, SMB and Box; PC Drum, developer, Tray 1 (500 sheets), Tray 2 (500 sheets), Tray 3 (1,000 sheets), Bypass (150 sheets). Requires 220V, 20A power (NEMA receptacle# 6-20R).
BASE UNIT bizhub PRO 950
OUTPUT OPTIONS FS-611
A10VWY1
Booklet/Folding Finisher
50-sheet Stapling, Half-fold, Tri-fold, Saddle-stitch Booklets.
FS-528
A10UWY1
Multi-Stapling Finisher
Staples up to 100 sheets with staple cutting function.
PI-506
A10YWY1
Post Process Inserter
Add pre-printed covers/inserts post-process (for FS-611 or FS-528).
PK-505
15US
Punch Kit
Adds selectable 2/3-hole punch to FS-611 or FS-528.
ZU-607
A111WY2
Z-Fold/Punch Kit
Adds Z-fold and selectable 2/3-hole punch to FS-611 or FS-528.
TU-502
A110WY1
Trimmer Unit
Trims folded output from FS-611.
MK-721
A10WWY1
Mount Kit
Enables attachment of TU-502 Trimmer.
PAPER SUPPLY OPTIONS LU-407
A0Y6WY1
Large Capacity Unit
4,500 sheets (20-lb. bond) of letter portrait.
LU-408
A0Y7WY1
Large Capacity Unit
4,000 sheets (20-lb. bond) up to 12" x 18".
Adobe PostScript Option
Includes Adobe PS3 and PDF Direct Print.
CONNECTIVITY OPTION PS-504
A10R011
CONSUMABLES CONSUMABLE
ITEM NO.
TN911 Toner
A0YP030
DV910 Developer
022B
1,000,000 @ 6%
DR910 Drum
022H
1,000,000 @ 6%
SK-701 Staple Kit
14YJ
5,000 x 3
for FS-528
MS-SC Staples
4448121
5,000 x 3
for FS-611
18
YIELD
NOTES
80,000 @ 6%