CV

Joshua W Giles, PhD, PEng

Joshua William Giles BESc (Mechanical), PhD, PEng Mechatronics in Medicine Laboratory | Biomechanics Laboratory Department of Mechanical Engineering, Imperial College London Exhibition Road, London SW7 2AZ, UK Email: [email protected] www.imperial.ac.uk/people/joshua.giles Mobile: +44 (0)7 546 900 550

POSITIONS 2014-

Post-Doctoral Research Associate Mechatronics in Medicine Laboratory | Biomechanics Laboratory Imperial College London, London, UK Wellcome Trust Translational Award Project: Design of an Innovative Shoulder Arthroplasty System Specific Involvement: Design of a Patient-Specific Surgical Guidance/Implantation Technique and Associated Instrumentation Research Interests: design of computer assistance techniques for minimally invasive joint replacement, design of novel patient specific surgical instrumentation, application of novel manufacturing methods

2007-2014

Research Engineer, Orthopaedic Research Hand and Upper Limb Centre, London, Ontario Research Responsibilities: design of testing protocols & apparatuses, development and fabrication of custom sensors, development of custom kinematic and kinetic data acquisition systems, data analysis & statistics, training and mentorship of lab personnel

VISITING POSITION 2013 (Fall)

NSERC International Research Fellowship Bone & Joint Research Center - Motion Analysis Laboratory Henry Ford Hospital, Detroit, Michigan, USA Supervisor: Dr. Michael J. Bey Development of a Biplane X-Ray Technique for the Physiologic Description of Scapulothoracic Motion

QUALIFICATIONS 2016-

Professional Engineering Licence (P.Eng) from Professional Engineers Ontario

2010-2014

PhD in Biomedical Engineering (Biomechanics) Graduate Program in Biomedical Engineering Western University, London, Canada Supervisor: Prof. James A. Johnson, PhD Development of an In-Vitro Passive and Active Motion Simulator for the Investigation of Shoulder Function and Kinematics

1

CV

Joshua W Giles, PhD, PEng Awarded Collip Medal for Best Doctoral Dissertation of 2013-2014

2009-2010

Master’s Candidate in Biomechanics (Transferred) Graduate Program in Biomedical Engineering Western University, London, Canada

2005-2009

Bachelor of Engineering Science with Distinction Mechanical and Materials Engineering Western University, London, Canada Awarded the Canadian Society of Mechanical Engineering Gold Medal

AWARDS & PRIZES 2014 2014 2013 2013 2013 2012 2012 2012 2005-2009 2009 2009 2008

Total Funding: $8,400 Collip Medal for Most Outstanding Dissertation 2013/2014 - Schulich School of Medicine & Dentistry, Western University First Place Basic Science Research Paper, 42nd Annual Orthopaedic Surgery Research Day, Western University, Value: $1000 Nellie Farthing Fellowship for Excellence in Research, Western University, Value: $3000 Fourth place, Three Minute Thesis (3MT) competition, Western University First Place Basic Science Research Paper, 41st Annual Orthopaedic Surgery Research Day, Western University, Value: $1000 Western Graduate Thesis Research Award, Western University, Value: $1500 Awarded Opening Talk, Annual American Shoulder and Elbow Society Closed Meeting First Place Basic Science Research Paper, 40th Annual Orthopaedic Surgery Research Day, Western University, Value: $1000 Engineering Dean’s Honour List Graduated with Distinction, Mechanical and Materials Engineering Gold Medal, Canadian Society for Mechanical Engineering (CSME) Faculty Association Award, Western University, Value: $900

FUNDING Total Funding: $243,600 Imperial College London, Department of Mechanical Engineering, Value: $4,600, Undergraduate Internship Bursary for Post-Doc Initiated Research, Role: Primary Investigator/Supervisor. 2011-2014 Natural Science and Engineering Research Council of Canada, Value: $106,000, Canadian Graduate Scholarship - Doctoral Level, Role: Researcher. 2013 Natural Science and Engineering Research Council of Canada, Value: $6,000, International Doctoral Research Fellowship – Michael Smith Foreign Study Supplement, Role: Researcher. 2009-2013 Western University, Value: $38,000, Graduate Research Scholarship, Role: Researcher. 2011 Ontario Ministry of Training, Colleges and Universities (Declined), Value: $15,000, Graduate Research Scholarship, Role: Researcher. 2010 Ontario Ministry of Training, Colleges and Universities, Value: $15,000, Graduate Research Scholarship, Role: Researcher. 2009-2010 Natural Science and Engineering Research Council of Canada, Value: $18,000, Master’s Research Scholarship, Role: Researcher. 2009 Ontario Ministry of Training, Colleges and Universities (Declined), Value: $15,000, Graduate Research Scholarship, Role: Researcher. 2007 & 2008 Natural Science and Engineering Research Council of Canada, Value: $14,000, Undergraduate Summer Research Fellowship, Role: Researcher. 2016

2

CV 2005-2009 2005-2009

Joshua W Giles, PhD, PEng Western University, Value: $10,000, Continuing Entrance Scholarship Government of Ontario, Value: $2,000, Queen Elizabeth Aiming for the Top Scholarship

GRANTS 2016-2021

2010-2015

Total Funding: $3,576,000 United States National Institutes of Health, $3,136,000, R01 Research Programme Grant, “Biomechanics of Reverse Total Shoulder Arthroplasty”, PI: Heath Henninger, Role: collaborator & consultant. Natural Science and Engineering Research Council of Canada, Value: $440,000, Research Programme Grant, “Development of Techniques to Improve Mechanical Analyses of the Reconstructed Shoulder Joint”. PI: Jim Johnson, Role: Contributor to research plan and costing.

INVITED PRESENTATIONS 1. Giles, J.W. (June 2016). The Role of Mechatronic Systems in Improving our Understanding of Upper

Limb Biomechanics and Optimizing Surgical Procedures. Keio University (Tokyo) Case Conference. 2. Giles, J.W. (Oct 2013). From Benchtop Testing to Whole Joint Motion Simulation: In-Vitro Biomechanical Experimentation. Henry Ford Hospital Bone & Joint Research Center Seminar Series. 3. Giles, J.W. (Apr 2013). Engineering in Orthopaedics: Guiding Clinical Practice through Biomechanical Experimentation. Western University’s Three Minute Thesis (3MT) competition campus-wide final. 4. Giles, J.W. (Jan 2010). Re-Engineering the Shoulder: A Look at Implant Design and Computer Assisted Surgery. Lawson Health Research Institute’s Talks On Fridays (TOFS).

PEER REVIEW ACTIVITIES 2012201320132013201420142016-

Journal of Biomechanics Journal of Bone and Joint Surgery Am. Journal of Orthopaedic Research Journal of Clinical Orthopaedics and Related Research American Journal of Sports Medicine BioMed Research International International Journal of Computer Assisted Radiology and Surgery

INDUSTRIAL & CLINICAL COLLABORATIONS 2016-

2014-

2013-2014

Dr Alice Bremner-Smith, FRCS (Tr & Orth) - Development of a Haptic Device for High Fidelity Assessment of Clinical Wrist Disorders ● Initiated collaboration with Hand and Wrist Surgeon (Head of Orthopaedics, Chelsea and Westminster Hospital, London, UK) to pursue physical examination applications of haptic devices Multi-National Orthopaedic Manufacturer (name protected by NDA) - Design of a Patient Specific Surgical Guidance/Implantation Technique and Associated Instrumentation ● Industry partner for Wellcome Trust translational project Depuy Synthes - Investigation of the Effect of Reverse Total Shoulder Replacement Implant Parameters on Glenohumeral Kinematics and Kinetics ● Provided polyethylene implant liners

3

CV

Joshua W Giles, PhD, PEng

May 2012

Wright Medical - Validation Testing and Data Analysis for InBone™ Ankle Replacement ● Company initiated consultancy

Aug 2010

Wright Medical - Contact Mapping Investigation and Data Analysis for Infinity™ Ankle Replacement ● Company initiated consultancy

Sept 2009

Arthrex - Investigation of the Effects of Partial Humeral Head Resurfacing Implant in the Setting of a Hill-Sachs Defect ● Provided partial resurfacing components

SUPERVISION Graduate Student Supervision (co-supervisor) 2015-2016 Yawen Chen - Master’s Mechanical Engineering, Imperial College London Project: Development of a Haptic Training Simulator for Orthopaedic Physical Exams 2014

Matthew Keating - Master’s Mechanical Engineering, Imperial College London Project: Designing a Novel Fixation Plate for Peri-Prosthetic Femoral Fractures

2011

Bryce Irvine, Neha Sharma - Master’s Mechanical & Materials Engineering, Western University Project: Load Transfer Characteristics Following Shoulder Bone Reconstruction

Orthopaedic Resident and Fellow Research Block (laboratory supervisor) 2013-2014 Irfan Abdullah, M.D. Post-Graduate Year-3, Western University Project: In-Vitro Biomechanical Assessment of the Effects of Reverse Total Shoulder Arthroplasty Implant Liner Constraint on Motion and Function 2011-2013

Ryan Degen, M.D. Post-Graduate Year-3, Western University Project: In-Vitro Biomechanical Comparison of the Bristow and Latarjet Coracoid Transfer Techniques for Reconstruction of Anterior Glenoid Bone Loss

2009-2010

Harm Boons, M.D. Clinical Fellow, Fowler Kennedy Sports Medicine Clinic Project: In-Vitro Biomechanical Investigation of the Stabilizing Effects of Coracoid Transfer Procedures

2009-2010

Ilia Elkinson, M.D., FRACS, Clinical Fellow, Hand and Upper Limb Centre Project: Comparison of Various Techniques for the Reconstruction of Hill-Sachs Humeral Head Defects

Undergraduate Course Projects (supervisor) 2015-2016 Ryan Posser - Mechanical Engineering III, Imperial College London Project: Review of the State of the Art in Single and Dual Plane Model-Based X-Ray Videography 2015-2016

Rishi Desai - Mechanical Engineering III, Imperial College London Project: Review of the State of the Art in Medical Applications of Statistical Shape Modelling

4

CV

Joshua W Giles, PhD, PEng

2014-2015

Patrick Moniz - Mechanical Engineering III, Imperial College London Project: Review of State of Art in Simultaneous Imaging of Hard & Soft Tissues

2010-2011

Rachael Brown, Chelsea Johnson, Allison Pellar, Derek Wideman - Mechanical & Materials Engineering IV, Western University Project: Design of an Apparatus for Assessment of Shoulder Stiffness

2010-2011

Gregory Whitwham - Mechanical & Materials Engineering IV, Western University Project: Development of an Intra-Operative Knee Stiffness Assessment Tool

2009-2010

Alex Heroux - Medical Biophysics III, Western University Project: Effect of Loading Parameters on Glenoid Implant-Bone Load Transfer

Laboratory Personnel (supervisor) 2013-2014 Jake Reeves, MESc (Mech) - Research Engineering Associate ● Develop and perform testing protocols ● Design testing apparatuses ● Perform data analysis 2013-2014

Jordan O’Brien, Computer Engineering Technologist - Research Technician ● Develop and maintain computer research systems ● Manage day to day lab administration ● Assist students with experiments

2011-2013

Mark Welsh, BScE (Mech) - Research Engineering Associate ● Develop and perform testing protocols ● Design testing apparatuses ● Perform data analysis

2010-2012

Allan Scholz, Electronics Engineering Technologist - Electronics Technician ● Develop custom electronics and sensors for experimentation ● Fabricate testing apparatuses ● Assist students with experiments

Summer Research Students (supervisor) 2016 Moucheng Xu - Mechanical Engineering II, Imperial College London. Project: Development and Validation of a Technique for Soft Tissue Digital Image Correlation and Initial Application to a Clinical Question 2016

Nian Li - Mechanical Engineering II, Imperial College London. Project: Development of a Haptic Device for Guiding Steerable Needle Insertion

2016

Harry de Winton - Mechanical Engineering II, Imperial College London. Project: Development of a Bespoke Software Platform for Integrated Kinematic Tracking during Biomechanical Experimentation

2013

Mohammad Haddara - Mechanical & Materials Engineering II, Western University. Project: Development of Automation Capabilities for Existing Custom Experimentation Software

2010-2012

Mark Welsh - Mechanical & Materials Engineering III, Queen’s University Projects: 1) Investigation of the strength of shoulder instability reconstructions, 2) CT-based morphological study correlating distal to proximal humeral anatomy

5

CV 2010-2012

Joshua W Giles, PhD, PEng Russell Pellar - Software Engineering III, Western University Project: Development and integration of visualization software with lab systems

Secondary School Co-op Students (supervisor) 2012 Jimena Prado - Nancy Campbell Collegiate Institute Grade 12 Project: Evaluation of Glenoid Anatomy for the Prediction of Instability

TEACHING Undergraduate Teaching Fall 2016 ME1-Stress Analysis ● Clinical tutor ● Mentored students on stress analysis skills ● 160 students Fall 2015

ME2-hTPS: Technical Presentation Skills, Imperial College London ● Course tutor and evaluator ● Mentored students on presentation skills ● 7 students/week

Feb 2013

CIV460: Engineering Biomechanics, University of Waterloo ● Guest Lecturer - “The Biomechanics of the Upper Extremity” ● Prepared and presented lecture material & notes ● 80 students

2011-2013

MME4469b: Biomechanics of the Musculoskeletal System, Western University ● Teaching Assistant, and ● Guest Lecturer - “Anatomy and Function of the Human Musculoskeletal System” & “Spatial Transformations and Motion Analysis in Biomechanics” ● Prepared and presented lecture material & notes ● Evaluated students & set exam questions ● 25-35 students

2011-2013

ES1050: Introductory Engineering Design and Innovation, Western University ● Teaching Assistant, and ● Guest Lecturer - “Engineering Design Selection, Iteration, and Optimization” ● Prepared lecture material & notes ● Evaluated students ● 40 students

2009-2011

ES3399: Integrated Engineering Design, Western University ● Teaching Assistant ● Mentored and evaluated students ● 15 students

Graduate Teaching 2009-2011 MME9675: Advanced Surgical Mechatronics, Western University ● Guest Lecturer - “Design Considerations and Techniques for Advanced In-Vitro Biomechanical Joint Simulation” ● Prepared and presented lecture material & notes ● 15 students

6

CV 2011-2013

Joshua W Giles, PhD, PEng BME9505b: Biomechanics of the Musculoskeletal System, Western University ● Teaching Assistant, and ● Guest Lecturer - “Spatial Analysis with Applications to Biomechanics and Computer Assisted Surgery” ● Prepared and presented lecture material & notes ● Evaluated students & set exam questions ● 3-7 students

Other Teaching 2010-2012 Western Engineering Summer Academy - Biomedical Engineering ● Developed curriculum for high school student summer Biomechanics course ● Created and presented modules on “In-Vitro Biomechanical Simulation” ○ Diverse range of education and experience ● Conducted interactive laboratory sessions ● 40 students

PROFESSIONAL MEMBERSHIPS 2016-

Professional Engineers Ontario – Professional Licence (P.Eng)

2015-

EPSRC Centre for Innovative Manufacturing in Medical Devices

2015-2016

International Society for Technology in Arthroplasty

2015-

International Shoulder Group

2015-2016

International Society of Biomechanics (ISB)

2014-2015

UK Bioengineering Society

2013-2016

Engineering Intern Program (EIT), Professional Engineers Ontario (PEO)

2013-2014

American Society of Mechanical Engineers, Bioengineering Division

OTHER SCHOLARLY AND PROFESSIONAL ACTIVITIES Conference Organisation & Committees 2015International Society for Computer Assisted Orthopaedic Surgery Annual Meeting ● Programme Committee Member and Adjunct to the Chair ● Member of the selection committee for Best Clinical & Technical Papers ● Session Chair Professional Development Courses Attended Oct 2015 Preparing Successful Fellowship Grant Applications, Post-Doc Development Centre, Imperial College London. Feb 2015 Introduction to Problem Based Learning, Educational Development Unit, Imperial College London. Jan 2015 A Practical Guide to Interactive Teaching, Post-Doc Development Centre, Imperial College London. Nov 2014 Managing your First Research Group, Post-Doc Development Centre, Imperial College London. Aug 2014 Research Ethics, Learning and Development Centre, Imperial College London.

7

CV

Joshua W Giles, PhD, PEng

Dec 2011 Fall 2011

Statistics Workshop, Robarts Research Institute. Psychology 3800, Statistics using Computers (Audit), Department of Psychology, Western University.

University Service & Committee Work 2015Departmental Post-doctoral Representative, Department of Mechanical Engineering, Imperial College London.  Secured a financial commitment of $15000/year from department to support independent post-doctoral research 2011-2013 Graduate Student Chair, Biomedical Engineering Student Committee. 2011-2013 Graduate Student Representative, Schulich School of Medicine and Dentistry Student Committee. 2013 Graduate Student Reviewer, Cyclic Program Review of Epidemiology and Biostatistics. 2011 Internal Student Reviewer, Cyclic Program Review of Biomedical Engineering. Community Service & Outreach 2016Guest Lecturer, “Biomechanics and its Basis in Physics & Maths”, Imperial College Reaching Further Programme for High School Outreach. 2016

Demonstrator, “Robotics & Mechatronics in Medicine”, Imperial College London Festival.

2010-2013

Workshop Coordinator, “Computer Navigation in Joint Replacement”, The Canadian Medical Hall of Fame TD Discovery Days in Health Sciences.

2010-2013

Demonstration Coordinator, “Orthopaedic Research and Human Biomechanics”, Class Tour and Demonstration, London Museum School Program.

2010-2012

Coordinator, Lecturer, and Lab Instructor - “Biomedical Engineering” Western Engineering Summer Academy, Western University

PATENTS 1. Giles, J.W.*, Rodriguez y Baena, F.*, Amis, A.A. (Priority Date: 11.03.15, Application Number: GB1504122.1). A patient specific guide and instrumentation system for minimally invasive joint replacement. *Primary Inventors.

PUBLICATIONS IN PEER-REVIEWED JOURNALS AND BOOK CHAPTERS Journal Articles: 25 Conference contributions: 78 Podiums: 45 & Posters: 33 Book Chapters: 1

Citations: 295 h-index = 11 i10-index = 11 Source: Google Scholar (Oct 25 2016)

1. Giles, J.W., Langohr, G.D.G., Johnson, J.A., & Athwal, G.S. (Apr 2016) The Rotator Cuff is an

Antagonist Following Reverse Total Shoulder Arthroplasty: A Biomechanical Study for Various Implant Configurations. Journal of Shoulder and Elbow Surgery. (Advanced Online Publication).

8

CV

Joshua W Giles, PhD, PEng

2. Baumer TG, Giles J.W., Drake A, Zauel R, Bey MJ. (Jan 2016) Measuring Three-Dimensional Thorax

Motion Via Biplane Radiographic Imaging: Technique and Preliminary Results. Journal of Biomechanical Engineering. 138(1):014504, 3. Welsh MF, Willing RT, Giles J.W., Athwal GS, Johnson JA. (Feb 2016) A Rigid Body Model for the Assessment of Glenohumeral Joint Mechanics: Influence of Osseous Defects on Range of Motion and Dislocation. Journal of Biomechanics. 49(4):514-519. 4. Giles J.W., Langohr GDG, Johnson JA, Athwal GS. (Nov 2015) Implant Design Variations in Reverse Total Shoulder Arthroplasty Influence the Required Deltoid Force and Resultant Joint Load. Clinical Orthopaedics and Related Research 473(11):3615-3626. 5. Glennie RA, Giles J.W., Johnson JA, Athwal GS, Faber KJ. An in vitro study comparing limited to full cementation of polyethylene glenoid components. Journal of Orthopaedic Surgery Research. 2015;10(1):142. 6. Giles, J.W., Owens, B.D., & Athwal, G.S. (Apr 2015). Estimating Glenoid Width for Instability-Related Bone Loss: A CT Evaluation of an MRI Formula. American Journal of Sports Medicine. 7. Giles, J.W., Ferreira, L.M., Athwal, G. S., & Johnson, J. A. (Dec 2014). Development and Performance Evaluation of a Multi-PID Muscle Loading Driven In Vitro Active-Motion Shoulder Simulator and Application to Assessing Reverse Total Shoulder Arthroplasty. Journal of Biomechanical Engineering. 2014;136(12):121007. 8. Langohr, G.D.G., Giles, J.W., Johnson, J. A., & Athwal, G. S. (June 2015). The Effect of Glenosphere Diameter in Reverse Shoulder Arthroplasty on Muscle Force, Joint Load, and Range of Motion. Journal of Shoulder and Elbow Surgery. 24(6):972-979. 9. Shannon, H.L., Deluce, S.R., Giles, J.W., Johnson, J.A., & King, G.J. (Feb 2015). The effect of radial head implant shape on radiocapitellar kinematics during in-vitro forearm rotation. Journal of Shoulder and Elbow Surgery. 24(2):258-264. 10. Giles, J.W., Degen, R.M., Johnson, J.A., & Athwal, G.S. (Aug 2014). The Bristow and Latarjet prodecures: Why these techniques should not be considered synonymous. Journal of Bone and Joint Surgery. 96(16): 1340-1348. 11. Degen, R.M., Giles, J.W., Johnson, J.A., & Athwal, G.S. (Aug 2014). Remplissage Versus Latarjet For Engaging Hill-Sachs Defects Without Substantial Glenoid Bone Loss: A Biomechanical Comparison. Invited publication in Clinical Orthopaedics and Related Research. 472(8):2363-71. 12. Puskas, G.J., Giles, J.W., Degen, R.M., Johnson, J.A., & Athwal, G.S. (Jan 2014). Humeral head reconstruction for Hill-Sachs defects: A biomechanical comparison of two fixation techniques for bone grafting. Arthroscopy: The Journal of Arthroscopic & Related Surgery. 30(1): 22-28. 13. Giles, J.W., Puskas, G.J., Welsh, M.F., Johnson, J.A., & Athwal, G.S. (Nov 2013). Suture anchor fixation of bony Bankart fractures: Comparison of single-point with double-point “suture bridge” technique. The American Journal of Sports Medicine. 41(11):2624-31. 14. Degen, R.M., Giles, J.W., Thompson, S.R., Litchfield, R.B., & Athwal, G.S. (Oct 2013). The biomechanics of complex shoulder instability. Invited publication in Clinics in Sports Medicine, Shoulder Instability in the Athlete. 32(4): 625-636. 15. Burkhart, S.S., deBeer, J.F., Giles, J.W., Johnson, J.A., & Athwal, G.S. (Jul 2013). Traditional and modified latarjet techniques: letter to the editor. The American Journal of Sports Medicine 41(7):NP312. 16. Elkinson, I., Giles, J.W., Boons, H.W., Faber, K.J., Ferreira, L.M., Johnson, J.A., & Athwal, G.S. (Jun 2013). The shoulder remplissage procedure for Hill-Sachs defects: Does technique matter? Journal of Shoulder and Elbow Surgery. 22(6):835-41. 17. Giles, J.W., Boons, H.W., Elkinson, I., Faber, K.J., Ferreira, L.M., Johnson, J.A., & Athwal, G.S. (Jun 2013). Does the dynamic sling effect of the Latarjet procedure improve shoulder stability? A biomechanical evaluation. Journal of Shoulder and Elbow Surgery. 22(6):821-7.

9

CV

Joshua W Giles, PhD, PEng

18. Boons, H.W., Giles, J.W., Elkinson, I., Johnson, J.A., & Athwal, G.S. (Feb 2013). Classic versus

congruent coracoid positioning during the Latarjet procedure: An in-vitro biomechanical comparison. Arthroscopy: The Journal of Arthroscopic & Related Surgery. 29(2):309-16. 19. Lalone, E.A., Giles, J.W., Alolabi, B., Peters, T.M., Johnson, J.A., & King, G.J. (Feb 2013). Utility of an image-based technique to detect changes in joint congruency following simulated joint injury and repair: An in-vitro study of the elbow. Journal of Biomechanics. 46(4):677-82. 20. Degen, R.M., Giles, J.W., Boons, H.W., Ferreira, L.M., Johnson, J.A., & Athwal, G.S. (Jan 2013). A biomechanical assessment of superior shoulder translation after reconstruction of anterior glenoid bone defects: The Latarjet procedure versus allograft reconstruction. International Journal of Shoulder Surgery. 7(1):7-13. 21. Giles, J.W., Puskas, G.J., Welsh, M., Johnson, J.A., & Athwal, G.S. (Dec 2012). Do the traditional and modified Latarjet techniques produce equivalent reconstruction stability and strength? The American Journal of Sports Medicine. 40(12):2801-07. 22. Giles, J.W., Elkinson, I., Ferreira, L.M., Faber, K.J., Boons, H., Litchfield, R., Johnson, J.A., & Athwal, G.S. (Sep 2012). Moderate to large engaging Hill-Sachs defects: An in-vitro biomechanical comparison of the remplissage procedure, allograft humeral head reconstruction, and partial resurfacing arthroplasty. Journal of Shoulder and Elbow Surgery. 21(9):1142-51. 23. Elkinson, I., Giles, J.W., Faber, K.J., Boons, H.W., Ferreira, L.M., Johnson, J.A., & Athwal, G.S. (Jun 2012). The effect of the remplissage procedure on shoulder stability and range of motion: An in-vitro biomechanical assessment. The Journal of Bone and Joint Surgery. American Volume. 94(11):100312. 24. Armitage, M.S., Elkinson, I., Giles, J.W., & Athwal, G.S. (Nov 2011). An anatomic, computed tomographic assessment of the coracoid process with special reference to the congruent-arc Latarjet procedure. Arthroscopy: The Journal of Arthroscopic & Related Surgery. 27(11):1485-89. 25. Giles, J.W., Boons, H.W., Ferreira, L.M., Johnson, J.A., & Athwal, G.S. (Apr 2011). The effect of the conjoined tendon of the short head of the biceps and coracobrachialis on shoulder stability and kinematics during in-vitro simulation. Journal of Biomechanics. 44(6):1192-95.

SUBMITTED MANUSCRIPTS UNDER REVIEW 1. Broden, C., Popat, R., Giles, J.W., Ohl, X., Olivecrona, H., Maguire, G., Noz, M., Zeleznik, M., Gordon,

M., Rodriguez y Banea, F., Emery, R. Accuracy and precision of a three-dimensional low dose CT method for assessing migration in shoulder arthroplasty: an experimental study. Journal of Biomechanics.

MANUSCRIPTS IN PREPARATION 1. Alidousti, H., Giles, J.W., Jeffers, J. Spatial Mapping of Humeral Head Bone Density. Clinical

Orthopaedics and Related Research.

ABSTRACTS AND PRESENTATIONS AT PROFESSIONAL MEETINGS 1. Chen, Y., Bowyer, S.A., Giles, J.W. (Sept 2016) Development of a Haptic Simulator for the Training of

Surgeons in Knee Physical Exam Skills. International Conference on Computer and Robot Assisted Surgery (International)(Poster).

10

CV 2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

14.

15.

16.

17.

18.

Joshua W Giles, PhD, PEng Giles, J.W., Langohr, G.D.G., Johnson, J.A., Athwal, G.S. (June 2016) The Rotator Cuff is an Antagonist Following Reverse TSA: A Biomechanical Study of Differing Implant Configurations. Canadian Orthopaedic Association Annual Meeting (National) (Podium). Liu, F., Giles, J.W., Li, J., Rodriguez y Baena, F. (June 2016) A Cloud Based System For Autonomous Orthopaedic Surgery Planning. Annual Meeting of the International Society for Computer Assisted Orthopaedic Surgery (International) (Special Poster). Giles, J.W., Rodriguez y Baena, F. (June 2016) Ex Vivo Assessment of a Novel Patient Specific Instrument Set and Surgical Approach for Minimally Invasive Total Shoulder Arthroplasty. Annual Meeting of the International Society for Computer Assisted Orthopaedic Surgery (International) (Extended Technical Podium). Giles, J.W., Langohr, G.D.G., Johnson, J.A., & Athwal, G.S. (Mar 2016). Interactions between Reverse Shoulder Arthroplasty Implant Variables and their Effects on Muscle and Joint Load. American Academy of Orthopedic Surgeons Annual Meeting. (International) (Poster) Giles, J.W., Langohr, G.D.G., Johnson, J.A., & Athwal, G.S. (Mar 2016). The Rotator Cuff is an Antagonist Following Reverse TSA: A Biomechanical Study of Differing Implant Configuration. Orthopaedic Research Society. (International) (Poster) Giles, J.W.; Amirthanayagam, T.D.; Emery, R.J.H.; Amis, A.A.; Rodriguez y Baena, F. (Oct 2015). Novel Surgical Approach, Guidance, and Instrumentation for Minimally Invasive Total Shoulder Arthroplasty. 28th Annual Congress of the International Society for Technology in Arthroplasty (EPoster) Vani Virdyawan, Giles, J.W., vanArkel, R.J., Oldfield, M., Rodriguez y Baena, F. (Sept 2015) High Aspect Ratio Additive Manufacturing of a Biologically Inspired Surgical Needle. Design of Medical Devices Europe 2015. (International) (Podium) Giles, J.W., Owens, B.D., & Athwal, G.S. (Sept 2015) Estimating Glenoid Width for Instability-Related Bone Loss: A CT Evaluation of an MRI Formula. XXVI Congress of the European Society for Shoulder and Elbow Surgery. (International) (Poster) Giles, J.W., Langohr, G.D.G., Johnson, J.A., & Athwal, G.S. (Sept 2015). The Influence of Reverse Shoulder Arthroplasty Implant Variables on Muscle Activation and Joint Load. XXVI Congress of the European Society for Shoulder and Elbow Surgery. (International) (Poster) Giles, J.W., Rodriguez y Baena, F. (Sept 2015) Development and Validation of a Novel Patient Specific Guide System For Minimally Invasive Total Shoulder Arthroplasty. MEIbioeng15 Annual Conference. (National) (Podium). Giles, J.W., Baumer, T.G., Drake, A., VanLuven, M., & Bey, M.J. (July 2015) Measuring ThreeDimensional Thorax Motion Using Biplane X-Ray Imaging: Technique and Accuracy Assessment. 25th Congress of the International Society of Biomechanics. (International) (Podium). Giles, J.W., Rodriguez y Baena, F. (June 2015) Development and Validation of a Novel Patient Specific Guide System For Minimally Invasive Total Shoulder Arthroplasty. Annual Meeting of the International Society for Computer Assisted Orthopaedic Surgery (International) (Podium). Giles, J.W., Langohr, G.D.G., Johnson, J.A., & Athwal, G.S. (June 2015). The Influence of Reverse Shoulder Arthroplasty Implant Variables on Muscle Activation and Joint Load. Canadian Orthopaedic Association Annual Meeting (National) (Podium). Abdulla, I., Langohr, G.D.G., Giles, J.W., Johnson, J.A., & Athwal, G.S. (June 2015). An In-Vitro study of the Effect of Humeral Cup Constraint in Reverse Shoulder Arthroplasty. Canadian Orthopaedic Association Annual Meeting (National) (Podium). Langohr, G.D.G., Giles, J.W., Johnson, J.A., & Athwal, G.S. (June 2015). An In-Vitro Study of the Effect of Reverse Shoulder Arthroplasty Sizing on Active and Passive Abduction and Internal-External Rotation. Canadian Orthopaedic Association Annual Meeting (National) (Podium). Abdulla, I., Langohr, G.D.G., Giles, J.W., Johnson, J.A., & Athwal, G.S. (June 2015). An In-Vitro study of the Effect of Humeral Cup Constraint in Reverse Shoulder Arthroplasty. Canadian Orthopaedic Research Society Annual Meeting (National) (High Scoring Poster). Langohr, G.D.G., Giles, J.W., Johnson, J.A., & Athwal, G.S. (June 2015). The Effect of Glenosphere Size on Joint Load, Muscle Force, and Range of Motion in Reverse Shoulder Arthroplasty: An In-Vitro Study. Canadian Orthopaedic Research Society Annual Meeting (National) (Poster).

11

CV

Joshua W Giles, PhD, PEng

19. Baumer, T.G., Giles, J.W., Drake, A., VanLuven, M., & Bey, M.J. (Feb 2015) Measuring Three-

20.

21.

22.

23.

24.

25.

26.

27.

28.

29.

30.

31.

32.

33.

Dimensional Thorax Motion Using Biplane X-Ray Imaging: Technique and Accuracy Assessment. 61st Annual Meeting of the Orthopaedic Research Society. (International) (Poster). Giles, J.W., Langohr, G.D.G., Johnson, J.A., & Athwal, G.S. (Feb 2015). The Influence of Reverse Shoulder Arthroplasty Implant Variables on Muscle Activation and Joint Load. 61st Annual Meeting of the Orthopaedic Research Society. (International) (Podium). Langohr, G.D.G., Giles, J.W., Johnson, J.A., & Athwal, G.S. (Feb 2015). An In-Vitro Study of the Effect of Reverse Shoulder Arthroplasty Sizing on Active and Passive Abduction and Internal-External Rotation. 61st Annual Meeting of the Orthopaedic Research Society. (International) (Poster). Giles, J.W., Langohr, G.D.G., Johnson, J.A., & Athwal, G.S. (Sept 2014). The Influence of Reverse Shoulder Arthroplasty Implant Variables on Muscle Activation and Joint Load. 2014 Conference of Mechanical Engineering Centres & Bioengineering Society (International) (Podium). Langohr, G.D.G., Giles, J.W.*, Johnson, J.A., & Athwal, G.S. (Sept 2014). An In-Vitro Study of the Effect of Reverse Shoulder Arthroplasty Sizing on Active and Passive Abduction and Internal-External Rotation. 2014 Conference of Mechanical Engineering Centres & Bioengineering Society (International) (Poster). *Presenter Giles, J.W., Elkinson, I., Boons, HW, Faber, K.J., Ferreira, L.M., Johnson, J.A., & *Athwal, G.S. (June 2014). Does the Dynamic Sling Effect of the Latarjet Procedure Improve Shoulder Stability? 2014 Nice Shoulder Course (International) (Podium). *Presenter Elkinson, I., Giles, J.W., Boons, H.W., Faber, K.J., Ferreira, L.M., Johnson, J.A., & *Athwal. G.S. (June 2014). Biomechanics of Hill-Sachs Remplissage: Does Technique Matter? 2014 Nice Shoulder Course (International) (Podium). *Presenter Giles, J.W., Degen, R.M., Johnson, J.A., & Athwal, G.S. (Mar 2014). The Bristow-Latarjet: Why These Techniques Should Not Be Considered Synonymous. American Academy of Orthopedic Surgeons Annual Meeting (International) (Podium). Welsh, M., Willing, R., *Giles, J.W., Johnson, J.A., & Athwal, G.S. (Mar 2014). A Computational Assessment Of Hill-Sachs Defect Size As It Relates To Glenohumeral Stability. American Academy of Orthopedic Surgeons Annual Meeting (International) (Podium). *Presenter Giles, J.W., Ferreira, L.M., Johnson, J.A., & Athwal, G.S. (Mar 2014). Development of a Novel Invitro Shoulder Simulator for Active Control of Glenohumeral and Scapulothoracic Movements in Various Planes. 60th Annual Meeting of the Orthopaedic Research Society. (International) (Podium). Shannon, H.L., Deluce, S.R., Giles, J.W., Johnson, J.A., & King, G.J. (Mar 2014). Effect of Radial Head Implant Shape on Radiocapitellar using an Image-Based Tool to Examine Joint Congruency. 60th Annual Meeting of the Orthopaedic Research Society. (International) (Podium) (Research Associate). Giles, J.W., Puskas, G., Welsh, M., Johnson, J.A., & Athwal, G.S. (Mar 2014). Humeral Head Allograft Fixation for Reconstruction of Hill-Sachs Defects: Antegrade versus Retrograde Fixation? 60th Annual Meeting of the Orthopaedic Research Society. (International) (Poster). Giles, J.W., Degen, R.M., Johnson, J.A., & Athwal, G.S. (Mar 2014). Comparing Remplissage with Latarjet Coracoid Transfer for Recurrent Shoulder Instability with a Hill-Sachs Defect: An Engaging Topic. 60th Annual Meeting of the Orthopaedic Research Society. (International) (Poster). Welsh, M., Willing, R., Giles, J.W., Johnson, J.A., & Athwal, G.S. (Oct 2013). Hill-Sachs Defect Engagement: The Influence of Size, Range of Motion and Joint Translation. American Shoulder and Elbow Society Annual Closed Meeting (International) (Podium). Giles, J.W., Ferreira, L.M., Johnson, J.A., & Athwal, G.S. (Jun 2013). Validation of a Novel In-Vitro Simulator for Real-Time Control of Active Shoulder Movements in Various Planes of Motion. American Society of Mechanical Engineers Summer Bioengineering Conference (International) (Podium).

12

CV

Joshua W Giles, PhD, PEng

34. Giles, J.W., Degen, R.M., Desjardins, J., Johnson, J.A., & Athwal, G.S. (Jun 2013). The Bristow-

35.

36.

37.

38. 39.

40.

41.

42.

43.

44.

45.

46.

47.

Latarjet: Why These Techniques Should Not Be Considered Synonymous. Canadian Orthopaedic Association Annual Meeting (National) (Podium). Shannon, H.L., Deluce, S.R., Giles, J.W., Johnson, J.A., & King, G.J. (Jun 2013). Radial Head Implant Shape Does Not Affect Radiocapitellar Kinematics During In-Vitro Forearm Rotation. Canadian Orthopaedic Research Society Annual Meeting (National) (Podium). Giles, J.W., Puskas, G.J., Welsh, M.F., Johnson, J.A., & Athwal, G.S. (Jun 2013). Suture Anchor Fixation of Bony Bankart Fractures: A Comparison of Single Row versus Suture Bridge Techniques. Canadian Orthopaedic Association Annual Meeting (National) (Poster). Giles, J.W., Puskas, G., Welsh, M.F., Johnson, J.A., & Athwal, G.S. (Jun 2013). Humeral Head Allograft Fixation for Reconstruction of Hill-Sachs Defects: Antegrade versus Retrograde Fixation? Canadian Orthopaedic Association Annual Meeting (National) (Poster). Giles, J.W., Owens, B.D., & Athwal, G.S. (Jun 2013). A Formula for Predicting Anterior Glenoid Bone Loss Due to Instability. Canadian Orthopaedic Association Annual Meeting (National) (Poster). Degen, R.M., Giles, J.W., Johnson, J.A., & Athwal, G.S. (Jun 2013). A Biomechanical Assessment of Superior Shoulder Translation after Reconstruction of Anterior Glenoid Bone Defects: The Latarjet Procedure versus Allograft Reconstruction. Canadian Orthopaedic Association Annual Meeting (National) (Poster). Degen, R.M., Giles, J.W., Johnson, J.A., & Athwal, G.S (Jun 2013). Comparing Remplissage with Latarjet Coracoid Transfer for Recurrent Shoulder Instability with a Hill-Sachs Defect: An Engaging Topic. Canadian Orthopaedic Association Annual Meeting (National) (Poster). Puskas, G.J., Giles, J.W., Welsh, M.F., Johnson, J.A., & Athwal, G.S. (Jun 2013). Suture Anchor Fixation of Bony Bankart Fractures: A Comparison of Single-Row Versus Suture Bridge Techniques. 73rd Annual Congress of the Swiss Society of Orthopaedics and Traumatology (International) (Podium). Puskas, G.J., Giles, J.W., Welsh, M.F., Johnson, J.A., & Athwal, G.S. (Jun 2013). Strength of HillSachs Allograft Reconstruction: A Biomechanical Comparison of Two Screw Fixation Techniques. 14th Annual Meeting of the European Federation National Associations of Orthopaedics and Traumatology (International) (Poster). Puskas, G.J., Giles, J.W., Welsh, M.F., Johnson, J.A., & Athwal, G.S. (Jun 2013). The Biomechanical Strength and Load Transfer of Classic and Congruent Arc Latarjet Procedures. 14th Annual Meeting of the European Federation National Associations of Orthopaedics and Traumatology (International) (Podium). Giles, J.W., Puskas, G.J., Welsh, M.F., Johnson, J.A., & Athwal, G.S. (Apr 2013). Stability of HillSachs Allograft Reconstruction: A Biomechanical Study Comparing Two Screw Fixation Techniques. 12th International Congress of Shoulder and Elbow Surgery (International) (E-Poster). Giles, J.W., Elkinson, I., Boons, HW, Faber, K.J., Ferreira, L.M., Johnson, J.A., & Athwal, G.S. (Mar 2013). Does Suture and Anchor Placement Technique Matter When Performing Remplissage for HillSachs Lesions? American Academy of Orthopedic Surgeons Annual Meeting (International) (Podium). Shannon, H.L., Deluce, S.R., Giles, J.W., Johnson, J.A., & King, G.J. (Mar 2013). Radial Head Implant Shape Does Not Affect Radiocapitellar Kinematics During In-Vitro Forearm Rotation. American Academy of Orthopedic Surgeons Annual Meeting (International) (Podium). Shannon, H.L., Deluce, S.R., Giles, J.W., Johnson, J.A., & King, G.J. (Mar 2013). Radial Head Implant Shape Does Not Affect Radiocapitellar Kinematics During In-Vitro Forearm Rotation. Annual Speciality Day Meeting of the Society of American Shoulder and Elbow Surgeons (International) (Podium).

13

CV

Joshua W Giles, PhD, PEng

48. Giles, J.W., Degen, R., Desjardins, J., Johnson, J.A., & Athwal, G.S. (Mar 2013). Comparison of Two

49.

50.

51.

52.

53.

54.

55.

56.

57.

58.

59.

60.

61.

62.

Competing Reconstructive Procedures for Complex Shoulder Instability using a Novel In-Vitro Testing Apparatus. London Health Research Day. (Regional) (Poster). Giles, J.W., Degen, R., Desjardins, J., Johnson, J.A., & Athwal, G.S. (Feb 2013). The BristowLatarjet: Why These Techniques Should Not Be Considered Synonymous. 59th Annual Meeting of the Orthopaedic Research Society. (International) (Poster). Giles, J.W., Puskas, G., Welsh, M., Johnson, J.A., & Athwal, G.S. (Feb 2013). Suture Anchor Fixation of Bony Bankart Fractures: A Comparison of Single Row versus Suture Bridge Techniques. 59th Annual Meeting of the Orthopaedic Research Society. (International) (Poster). Giles, J.W., Owens, B., Johnson, J.A., & Athwal, G.S. (Feb 2013). A Formula for Predicting Anterior Glenoid Bone Loss Due to Instability. 59th Annual Meeting of the Orthopaedic Research Society. (International) (Podium). Giles, J.W., Puskas, G., Welsh, M., Johnson, J.A., & *Athwal, G.S. (Oct 2012). Do the Traditional and Modified Latarjet Techniques Produce Equivalent Reconstruction Stability and Strength? American Shoulder and Elbow Society Annual Closed Meeting (International) (Podium). *Presenter Giles, J.W., Elkinson, I., Boons, HW, *Faber, K.J., Ferreira, L.M., Johnson, J.A., & Athwal, G.S. (Oct 2012). Does the Dynamic Sling Effect of the Latarjet Procedure Improve Shoulder Stability? A Biomechanical Evaluation. American Shoulder and Elbow Society Annual Closed Meeting (International) (Podium). *Presenter Puskas, G.J., Giles, J.W., Welsh, M.F., Athwal, G.S. & Johnson, J.A. (Jul 2012). The Biomechanical Effectiveness of Classic and Congruent Arc Latarjet Procedures. 72nd Annual Meeting of the Swiss Society for Orthopaedics and Traumatology (International) (Podium). Giles, J.W., Boons, H.W., Elkinson, I., Ferreira, L.M., Faber, K.J., Litchfield, R.B., Johnson, J.A., & Athwal. G.S. (Jun 2012). A Biomechanical Evaluation of the Dynamic Sling Effect of the Latarjet Procedure: Does It Improve Shoulder Stability? Canadian Orthopaedic Association Annual Meeting (National) (Podium). Giles, J.W., Boons, H.W., Elkinson, I., Kaber, K.J., Ferreira, L.M., Athwal, G.S., & Johnson, J.A. (Jun 2012). An In-Vitro Biomechanical Comparison of the Classic and Congruent Arc Latarjet Procedures. Canadian Orthopaedic Association Annual Meeting (National) (Podium). Giles, J.W., Puskas, G.J., Welsh, M.F., Athwal, G.S., & Johnson, J.A. (Jun 2012). The Biomechanical Strength of Classic and Congruent Arc Latarjet Constructs. Canadian Orthopaedic Association Annual Meeting (National) (Podium). Giles, J.W., Boons, H.W., Elkinson, I., Faber, K.J., Ferreira, L.M., Athwal, G.S., & Johnson, J.A. (Feb 2012). Classic and Congruent Latarjet Techniques: An In-Vitro Biomechanical Comparison. 58th Annual Meeting of the Orthopaedic Research Society (International) (Podium). Giles, J.W., Boons, H.W., Elkinson, I., Ferreira, L.M., Faber, K.J., Litchfield, R.B., Johnson, J.A., & Athwal, G.S. (Feb 2012). Does the Dynamic Sling Effect of the Latarjet Procedure Improve Shoulder Stability? A Biomechanical Evaluation. American Academy of Orthopedic Surgeons Annual Meeting. (International) (Podium). Giles, J.W., Puskas, G.J., Welsh, M.F., Athwal, G.S., & Johnson, J.A. (Feb 2012). The Biomechanical Effectiveness of Classic and Congruent Arc Latarjet Procedures. 58th Annual Meeting of the Orthopaedic Research Society (International) (Poster). Giles, J.W., Elkinson, I., Boons, H.W., Faber, K.J., Ferreira, L.M., Athwal, G.S., & Johnson, J.A. (Feb 2012). The Shoulder Remplissage Procedure for Hill-Sachs Lesions: Does Technique Matter? 58th Annual Meeting of the Orthopaedic Research Society (International) (Poster). Giles, J.W., Boons, H.W., Elkinson, I., Ferreira, L.M., Faber, K.J., Litchfield, R.B., Johnson, J.A., & Athwal, G.S. (Feb 2012). Does the Dynamic Sling Effect of the Latarjet Procedure Improve Shoulder

14

CV

63.

64.

65.

66.

67.

68.

69.

70.

71.

72.

73.

74.

Joshua W Giles, PhD, PEng Stability? A Biomechanical Evaluation. 58th Annual Meeting of the Orthopaedic Research Society (International) (Poster). Giles, J.W., Elkinson, I., Ferreira, L.M., Faber, K.J., Boons, H.W., Litchfield, R.B, Johnson, J.A., & *Athwal, G.S. (Oct 2011). Moderate to Large Engaging Hill-Sachs Defects: An In-Vitro Biomechanical Comparison of the Remplissage Procedure, Allograft Humeral Head Reconstruction and Partial Resurfacing Arthroplasty. American Shoulder and Elbow Surgeons Annual Closed Meeting. (International) (Podium). *Presenter Elkinson, I., Giles, J.W., Faber, K.J., Boons, H.W., Ferreira, L.M., Johnson, J.A., & Athwal, G.S. (Oct 2011). The Effect of the Remplissage Procedure on Shoulder Stability and Range of Motion: An InVitro Biomechanical Assessment. American Shoulder and Elbow Surgeons Annual Closed Meeting. (International) (Podium). Giles, J.W., Elkinson, I., Faber, K.J., Ferreira, L.M., Boons, H.W., Litchfield, R.B., Johnson, J.A., & Athwal, G.S. (Jul 2011). Moderate to Large Hill-Sachs Defects: An In-Vitro Biomechanical Comparison of Remplissage, Allograft and Partial Resurfacing Arthroplasty. Canadian Orthopaedic Research Society Annual Meeting (National) (Podium). Elkinson, I., *Giles, J.W., Faber, K.J., Ferreira, L.M., Litchfield, R.B., Johnson, J.A., & Athwal, G.S. (Jul 2011). The Effect of the Remplissage Procedure on Shoulder Stability and Range of Motion: An In-Vitro Biomechanical Assessment. Canadian Orthopaedic Association Annual Meeting (National) (Podium). *Presenter Elkinson, I., Giles, J.W., Faber, K.J., Ferreira, L.M., Litchfield, R.B., Johnson, J.A., & Athwal, G.S. (Jul 2011). The Shoulder Remplissage Procedure for Hill-Sachs Lesions: Does Technique Matter? Canadian Orthopaedic Association Annual Meeting (National) (Podium). Giles, J.W., Boons, H.W., Ferreira, L.M., Athwal, G.S., & Johnson, J.A. (Jul 2011). The Effect of the Conjoined Tendon of the Short Head of the Biceps and Coracobrachialis on Shoulder Stability & Kinematics during In-Vitro Simulation. Canadian Orthopaedic Research Society Annual Meeting (National) (Poster). Glennie, A., Giles, J.W., Faber, K.J., & Johnson, J.A. (Jul 2011). The Effect of Cement Technique on Load Transfer and Fixation of the Glenoid Component in Total Shoulder Arthroplasty. Canadian Orthopaedic Association Annual Meeting (National) (Podium). Armitage, M.S., Elkinson, I., Giles, J.W., & Athwal, G.S. (Jul 2011). An Anatomic Assessment of the Coracoid Process with Special Reference to the Congruent Arc Laterjet. 2011 Canadian Orthopaedic Association Annual Meeting (National) (Podium). Lalone, E.A., Giles, J.W., Deluce, S.R., Peters, T.M., King, G.J., & Johnson, J.A. (Jul 2011). The Effect of Collateral Ligament Repair on Ulnohumeral Joint Congruency. Canadian Orthopaedic Research Society Annual Meeting (National) (Poster). Giles, J.W., Boons, H.W., Ferreira, L.M., Athwal, G.S., & Johnson, J.A. (Mar 2011). The Effect of the Conjoined Tendon of the Short Head of the Biceps and Coracobrachialis on Shoulder Stability & Kinematics during In-Vitro Simulation. 22nd Annual Lawson Health Research Institute Annual Research Day (Institutional) (Poster). Giles, J.W., Boons, H., Ferreira, L., Athwal, G., & Johnson, J. (Jan 2011). The Effect of the Conjoined Tendon of the Short Head of the Biceps and Coracobrachialis on Shoulder Stability & Kinematics during In-Vitro Simulation. 57th Annual Meeting of the Orthopaedic Research Society (International) (Poster). Giles, J.W., Elkinson, I., Faber, K.J., Ferreira, L.M., Johnson, J.A., & Athwal, G.S. (Feb 2011). Moderate to Large Hill-Sachs Defects: A Comparison of Remplissage, Allograft and Partial Resurfacing. American Academy of Orthopedic Surgeons Annual Meeting (International).

15

CV

Joshua W Giles, PhD, PEng

75. Elkinson, I., Giles, J.W., Faber, K.J., Boons, H.W., Litchfield, R.B., Ferreira, L.M., Johnson, J.A., &

76.

77.

78.

79.

80.

81.

Athwal, G.S. (Feb 2011). Does the Remplissage Procedure Decrease Shoulder Range of Motion? American Academy of Orthopedic Surgeons Annual Meeting (International) (Podium). Desai, S., Sanders, D., Ferreira, L.M., Giles, J.W., & Johnson, J.A. (Oct 2010). The Mechanical Effect of Targeted Blocking Screws in Distal Femur Fractures. Orthopaedic Trauma Association Annual Meeting (International) (Podium). Giles, J.W., Glennie, A., Ferreira, L.M., Athwal, G.S., Johnson, J.A., & Faber, K.J. (Jun 2010). Interface Distraction and Loosening of the Polyethylene Glenoid Implant for Various Joint Loading Modalities: Implications for Failure in Total Shoulder Arthroplasty. Canadian Orthopaedic Research Society Annual Meeting (National) (Podium). Glennie, A., Giles, J.W., Ferreira, L.M., Athwal, G.S., Johnson, J.A., & Faber, K.J. (Jun 2010). Measuring Tensile and Compressive Forces on Underlying Glenoid Bone in Total Shoulder Arthroplasty. Canadian Orthopaedic Association Annual Meeting (National) (Podium). Desai, S., Sanders, D., Ferreira, L.M., Giles, J.W., & Johnson, J.A. (Jun 2010). The Mechanical Effect of Locking and Blocking Screws in Distal Femur Fractures. Canadian Orthopaedic Association Annual Meeting (National) (Podium). Giles, J.W., Glennie, A., Ferreira, L.M., Athwal, G.S., Faber, K.J., & Johnson, J.A. (Mar 2010). Mechanisms of Load Transfer Between a Polyethylene Glenoid Implant and Bone: Implications for Loosening in Total Shoulder Arthroplasty. 56th Annual Meeting of the Orthopaedic Research Society (International) (Poster). Giles, J.W., Glennie, A., Ferreira, L.M., Athwal, G.S., Faber, K.J., & Johnson, J.A. (Mar 2010). Mechanisms of Load Transfer Between a Polyethylene Glenoid Implant and Bone: Implications for Loosening in Total Shoulder Arthroplasty. 21st Annual Lawson Research Day (Institutional) (Poster).

16