INSULATIONS PLASTERS PAINTS ADHESIVES
www.bolix.pl
INTERIOR PAINTS / INTERIOR PLASTERS / WALL LEVELLING AND SKIMMING / WALL PRIMING / ANCILLARY MATERIALS
INTERIOR PAINTS
3
INTERIOR PLASTERS
4
• Bolix Sonata Acryl White • Bolix Acord Acryl Perfect • Bolix Politone Plus • Bolix Camertone Latex
• Bolix roller plaster • Decorative Plaster Bolix Deco • Bolix Deco Lazur • Bolix mosaic texture plaster Bolix TM
WALL LEVELLING AND SKIMMING 6 • Bolix Presto Acryl • Bolix SP skim coat • Bolix W repair mortar • Render Undercoat Bolix OT
• Lightweight cement and lime based render Bolix TCW-L
WALL PRIMING
7
ANCILLARY MATERIALS
8
• Appret Bolix OP • Bolix Ultragrunt • Bolix Gipsgrunt • Bolix Active Grunt
• Bucket and plastic mortars • Roller trays and roller grids • Telescopic poles • Construction foil • Masking tapes • Trowel • Stainless
• Brick trowels, stainless steel • Finishing darby • Paintbrush • Rollers and roller frames • Mixers • Other tools
- 02 -
INTERIOR PAINTS / INTERIOR PLASTERS / WALL LEVELLING AND SKIMMING / WALL PRIMING / ANCILLARY MATERIALS
INTERIOR PAINTS BOLIX SONATA ACRYL WHITE
Snow white acrylic paint. Ideal for all types of general purpose rooms: walls, ceilings . Perfect and durable white, good hiding . Water vapour permeable. Resistant to hairline cracking. Odourless, does not contain organic solvents (VOC). Sprayable
Average coverage: up to 12 m²/l for one coat application Colour range: snow white Gloss level: deep matt finish Hiding power: Class 1 according to the standard PN-EN 13300 Resistance to wet scrubbing: class 4 according to PN EN13300 Density: approx. 1.50 g/cm Application method: paint roller, brush or airless paint spraying Available containers: 10l Recommended number of paint coats: 2 Priming: BOLIX Active Grunt or BOLIX Ultragrunt
BOLIX ACORD ACRYL PERFECT
Recommended for all room types: mainly bedrooms and living rooms. Economical when tinted with the Bolix paint dispenser . Odourless. Good hiding power. Water vapour permeable, resistant to hairline cracking. Sprayable.
Coverage: Up to 12 m²/l for one coat application Colour range: according to the BOLIX Spectrum Inside and Spektrum 300+ colour charts Gloss level: deep matt finish Hiding power: Class 2 for the coverage of 6 m²/l in conformity with PN-EN 13300 Resistance to wet scrubbing: Class 2 according to the standard PN-EN 13300 Density: approx. 1.50 g/cm Application method: paint roller, brush or airless paint spraying Available containers: 5l, 10l, 18l Recommended number of paint coats: 2 Priming: BOLIX Active Grunt or BOLIX Ultragrunt
BOLIX POLITONE PLUS
Interior hypoallergenic latex paint. Ideal for heavy traffic areas: corridors, halls, living rooms, dining rooms. Lasting and attractive colours. Deep matt finish. Odourless, does not contain organic solvents (VOC). Excellent hiding power. Easy to keep clean - high washability and scrubbability. Water vapour permeable. Thixotropic - non-drip paint, easy to apply. Sprayable. Water vapour permeable, resistant to hairline cracking
Coverage: up to 13m2 per litre for one paint coat application Colour range: according to the BOLIX Spectrum Inside and Spektrum 300+ colour charts Gloss level: deep matt finish Hiding power: Class 1 for the coverage of 6.5 m²/l in conformity with PN-EN 13300 Resistance to wet scrubbing: Class 3 according to the standard PN-EN 13300 Density: approx. 1.50 g/cm Application method: paint roller, brush or airless paint spraying Available containers: 5l, 10l, 18l Recommended number of paint coats: 1-2 Priming: BOLIX Active Grunt or BOLIX Ultragrunt
BOLIX CAMERTONE LATEX
Ideal for high traffic areas: children's rooms, kitchens, bathrooms . Attractive colours from the Bolix colour chart . Thixotropic - non-drip paint, easy to apply. Deep matt - no reflections. Increased resistance to hairline cracking. Resistance to washing and scrubbing with majority of common detergents and disinfectants.
Coverage: up to 14m/litre for one paint coat application over smooth and properly prepared surface Colour range: according to the BOLIX Spectrum Inside and Spektrum 300+ colour charts Gloss level: deep matt finish Hiding power: Class 1 for the coverage of 7 m²/l in conformity with PN-EN 13300 Resistance to wet scrubbing: Class 1 according to the standard PN-EN 13300 Density: approx. 1.30 g/cm Application method: paint roller, brush or airless paint spraying Available containers: 5l, 10l, 18l Recommended number of paint coats: 1-2 Priming: BOLIX Active Grunt or BOLIX Ultragrunt
- 03 -
INTERIOR PAINTS / INTERIOR PLASTERS / WALL LEVELLING AND SKIMMING / WALL PRIMING / ANCILLARY MATERIALS
INTERIOR PLASTERS BOLIX ROLLER PLASTER
Decorative plaster, which gives special decorative finish on walls. For interior and exterior applications. Texture is produced with a special roller or other texturing tool (e.g. brush, stamp). Weather resistant.
Coverage: for one coat application on smooth non-porous surface 0.8÷1.2 kg/m Colour: white or from the BOLIX Spektrum 300+ Colour Chart Necessary tools: agitator or low-speed drill with a propeller or jiffy mixer. Depending on application method: paint roller with various covers, metal trowel, spatula. Available containers: 15kg and 30kg.
Possible effects:
BRICK EFFECT
SPOTTED EFFECT
SAND DUNE EFFECT
VERTIGO EFFECT
METAL EFFECT
CANE EFFECT
RUSTIC EFFECT
SKIN EFFECT
CONCRETE EFFECT
FLAW IN THE MARBLE EFFECT
WOOD BOARD EFFECT
DECORATIVE PLASTER BOLIX DECO
Decorative finish imitating natural stone. Highly recommended for plinths, cornices, columns, pilasters and wainscoting. Water vapour permeable. Enhanced resistance to microbial growth. Available in 48 colours and two aggregate sizes: BOLIX DECOST thickness 0.5-1.0 mm BOLIX DECOAM: 0.5-2.0 mm
Coverage: BOLIX DECO ST 2.8 - 3.5 kg/m for spray application of two coats 2.8 - 3.5 kg/m for hand application BOLIX DECO AM 3.8 - 4.8 kg/m for spray application of two coats Available containers: 15kg and 30kg Necessary tools: agitator or low-speed drill with a jiffy mixer, spray compressor (for DECO AM and DECOST), large stainless steel plastering trowel to coat the surface, stainless steel trowel to remove excess plaster and even out the plaster (for hand applied DECOST), stainless steel brick trowel and scraper, paper masking tape.
Possible effect:
STONE EFFECT
- 04 -
INTERIOR PAINTS / INTERIOR PLASTERS / WALL LEVELLING AND SKIMMING / WALL PRIMING / ANCILLARY MATERIALS
INTERIOR PLASTERS BOLIX DECO LAZUR
For interior and exterior applications. Unlimited variety of colours and shades created on the surface. Especially recommended to produce streak effect imitating natural stone over BOLIX DECO.
Available containers: 0,2l, 1l Necessary tools: vary depending on desired decorative effect e.g. brush, roller, sponge, tampon, cloth, painting glove or sprayer, paper masking tape for separating decorated area.
BOLIX MOSAIC TEXTURE PLASTER BOLIX TM
Decorative or interior and exterior applications. Excellent resistance to abrasion and damage. Excellent resistance to whitewash. Provides durable colours. Wide range of multicoloured compositions. Suitable to finish decorative areas and architectural details. Available in two aggregate sizes (approx. 1mm and 1.5mm)
Coverage: 2.0 - 3.0 kg/m2 GROUP A approx.1mm 3.0 - 4.0 kg/m2 GROUP B approx.1.5mm Colour range: 340 colours Necessary tools: agitator or low-speed drill with a jiffy mixer, large stainless steel plastering trowel to coat the surface, stainless steel trowel to remove excess render and even out the plaster, stainless steel brick trowel and scraper, paper masking tape for separating plastered area and for seaming. Available containers: 15kg and 30kg
- 05 -
INTERIOR PAINTS / INTERIOR PLASTERS / WALL LEVELLING AND SKIMMING / WALL PRIMING / ANCILLARY MATERIALS
WALL LEVELLING AND SKIMMING BOLIX PRESTO ACRYL
Pre-mix acrylic skim coat, quick to apply. White after drying, dust free. Easy to work, apply and sand. Ideal underlayment for paint, decorative gypsum plaster and wallpaper. Can be applied to drywall, gypsum, cement and lime-cement renders and concrete.
Coating thickness: 0 – 2mm Coverage: approx. 1.5 kg/m for 1 mm coat Colour range: white Necessary tools: agitator or low-speed drill with a propeller or jiffy mixer, steel trowel, spatula Available containers: 19kg
BOLIX SP SKIM COAT
White gypsum skim coat for thin coat skimming, smoothing and levelling of walls and ceilings. Ideal underlayment for paints and wallpapers. Suitable for interiors in areas not exposed to damp. Can also be used to grout plasterboards, glue polystyrene ceiling tiles, renovate and fill gaps and cracks on walls and ceilings. Can be applied over cement, lime-cement and concrete substrate, gypsum plasters and drywall.
Optimum thickness of one coat: 2 mm Coverage: approx. 0.9 kg/m for 1 mm coat Colour range: white Necessary tools: construction bucket, agitator or low-speed drill with a jiffy mixer, stainless steel spatula and stainless steel or plastic trowel, hand sander (fine sandpaper), sander with abrasive mesh Available containers: 20kg Open time: approx. 2 h
BOLIX W REPAIR MORTAR
For levelling and filling irregularities in mineral substrate. For interior and exterior applications. Suitable for use in intermittently damp locations.
Optimum thickness of one coat: 5-15 mm Maximum coat thickness should not exceed 30 mm. Coverage: approx. 1.9 kg/m for 1 mm coat Colour: grey Necessary tools: construction bucket, agitator or low-speed drill with a jiffy mixer, stainless steel spatula and plastering trowel for levelling. Available containers: 25kg Open time: approx. 45 min.
RENDER UNDERCOAT BOLIX OT
For spray application. Suitable over ceramic substrate and made of autoclaved aerated, concrete and silicate blocks, expanded clay aggregate etc. Improves surface bond and provides a key for thin-coat render. For internal and external applications. Water vapour permeable
Coverage: approx. 8 kg/m at 100% hiding and application over properly prepared surface Colour: grey Available containers: 25kg
LIGHTWEIGHT CEMENT AND LIME BASED RENDER BOLIX TCW-L
Used for traditional plastering and rendering. Suitable for hand and machine application (with a plastering machine). Water vapour permeable, nonflammable. Provides high yield. Meet hygiene, health and environmental requirements. Organic render with perlite content
Coverage: approx. 10-11 kg of dry mix for 1m of 10mm render coat Optimum coat thickness: 10 mm Colour: grey Available containers: 25kg
- 06 -
INTERIOR PAINTS / INTERIOR PLASTERS / WALL LEVELLING AND SKIMMING / WALL PRIMING / ANCILLARY MATERIALS
WALL PRIMING BOLIX OP PRIMER
For interior and exterior application. Improves surface bond and provides a key for plaster and render. Evens out the setting and drying process of the render or plaster. Seals off, reduces and evens out any surface porosity and consolidates dusty or friable surfaces. Protects the primed surface against adverse effect of moisture.
Average primer consumption at one coat application is approx. 0.25÷0.40 kg/m Colours: white or matching the render colour chart: BOLIX Deco, BOLIX TM and roller plaster BOLIX TR Necessary tools: agitator or low-speed drill with a jiffy mixer, a paint brush or roller. Available containers: 5kg, 10kg, 25kg
BOLIX ULTRAGRUNT
Universal primer. Primes surfaces prior to top coat application like paint, wallpapers, adhesive and levelling mortar as well as cement floors . Improves surface bond, provides a key for the finish coat and suppresses dust formation. Facilitates application of subsequent coats.
Average primer consumption for one coat application is approx. 0.10÷0.20 kg/m Colour: colourless Necessary tools: agitator or low-speed drill with a jiffy mixer, a paint brush or roller or spray gun with a compression sprayer Available containers: 1kg, 5kg, 10kg
BOLIX GIPSGRUNT
Primes the surface prior to the application of plasters, skim coats and gypsum adhesives for drywall installation. Strengthens the surface, improves surface bond, provides a key for gypsum plasters and adhesives. Seals off, reduces and evens out any surface porosity and consolidates dusty or friable surfaces . Protects the primed surface against adverse effect of moisture penetration. Seals and blocks out stains in base coats and prevents from bleeding through to the top coats. This is a concentrate, mix with water in 1:3 ratio (Bolix Gipsgrunt : water).
Coverage: for one coat of prime application is approx. 0.10÷-0.20 kg/m Colour: yellow Necessary tools: a brush, paint roller or spray gun with a compression sprayer. Available containers: 10kg
BOLIX ACTIVE GRUNT
Interior primer with fillers, which provides high coverage, hiding power and a perfect key coat. Seals off, reduces and evens out any surface porosity. Promotes adhesion and hiding properties of interior paints and reduces paint consumption. Seals off and strengthens the surface for painting, tiling, wallpapering, etc. Practically odourless, does not contain organic solvents (VOC).Water vapour permeable
Coverage: approx. 10m /litre Colour range: white Method of application: paint roller, brush or by spraying Available containers: 5l and 10l
- 07 -
INTERIOR PAINTS / INTERIOR PLASTERS / WALL LEVELLING AND SKIMMING / WALL PRIMING / ANCILLARY MATERIALS
ANCILLARY MATERIALS
Article name Plastic bucket 8l Eimer Plastic aus Kunststoff, bucket 13l 13l Plastic bucket 20l Eimer Kunststoff, 20l Plasticausmortar box 65l Plastic mortar box 90l Plastic mortar box 45l
Code IN01 IN02 IN03 BN051 BN048 BN049 BN050
pcs per package
Article name Grout bucket 16l
Code BN051
pcs per package 1
Article name Roller tray 350 x 330mm Roller tray 320 x 260mm Roller tray 260 x 230mm Roller tray 240 x 150mm Roller tray 190 x 110mm
Code BN085 BN086 BN087 BN088 BN089
pcs per package 50 10 10 20 10
- 08 -
40 25 25 1 1 1
INTERIOR PAINTS / INTERIOR PLASTERS / WALL LEVELLING AND SKIMMING / WALL PRIMING / ANCILLARY MATERIALS
ANCILLARY MATERIALS
Article name Thin 4*5 construction foil Medium Eimer aus 4*5Kunststoff, construction 13lfoil Thick construction foil - blue Super strong Eimer4x5 aus construction Kunststoff, 20l foil (red) Construction foil 0.5 kg original 4*5 Eimerconstruction aus Kunststoff, foil 1kg 13l
Code IN09 IN02 IN10 IN11 BN051 IN12 IN13 IN02 IN14
pcs per package 50 25 20 20 10 1 20 25 10
Article name Universal tape 50/10 Universal tape 50/25 Universal tape 50/50
Code IN15 IN16 IN17
pcs per package 12 60 54
Article name Seaming tape 20m Seaming tape 45m Seaming tape 90m Seaming tape 150m
Code IN18 IN19 IN20 IN21
pcs per package 24 24 24 24
- 09 -
INTERIOR PAINTS / INTERIOR PLASTERS / WALL LEVELLING AND SKIMMING / WALL PRIMING / ANCILLARY MATERIALS
ANCILLARY MATERIALS
Article name Roller grid 210 x 250mm Roller grid 260 x 280mm
Code BN090 BN091
pcs per package 20 20
Article name 2 m telescopic pole Eimer 3 maus telescopic Kunststoff, pole13l 2 m metal telescopic pole HARDY 3 m Eimer metal aus telescopic Kunststoff, pole 20l HARDY
Code IN04 IN02 IN05 IN06 BN051 IN07
pcs per package 24 25 24 10 10 1
Article name Alu telescopic pole 2m PROFI HARDY
Code IN08
pcs per package 10
- 10 -
INTERIOR PAINTS / INTERIOR PLASTERS / WALL LEVELLING AND SKIMMING / WALL PRIMING / ANCILLARY MATERIALS
ANCILLARY MATERIALS
Article name Paper masking tape 19mm (48) Paper Eimer masking aus Kunststoff, tape 25mm 13l(36) Paper masking tape 30mm (40) Paper masking tape 38mm Eimer aus Kunststoff, 20l(24) Paper masking tape 48mm (24)
Code IN22 IN02 IN23 IN24 BN051 IN25 IN26
pcs per package 24 25 24 48 36 1 40
Article name Masking tape 25mm/50m Masking tape 30mm/50m Masking tape 38mm/50m Masking tape 50mm/50m
Code IN27 IN28 IN29 IN30
pcs per package 24 24 36 32
Article name PCV tape 30mm/25m PCV tape 38mm/25m PCV tape 50mm/25m
Code IN31 IN32 IN33
pcs per package 24 24 24
- 11 -
INTERIOR PAINTS / INTERIOR PLASTERS / WALL LEVELLING AND SKIMMING / WALL PRIMING / ANCILLARY MATERIALS
ANCILLARY MATERIALS
Article name Blue tape 25mm x 33m Eimer Blue tape aus Kunststoff, 30mm x 33m 13l Blue tape 38mm x 33m Blue tape 48mm x 33m
Code IN34 IN02 IN35 IN36 BN051 IN37
pcs per package 24 25 24 24 24 1
Article name Plastering tape 38mm x 33m orange Plastering tape 48mm x 33m orange
Code IN38 IN39
pcs per package 24 24
Article name Stainless 130x270 mm professional trower, two-material handle G-3
Code BN001
pcs per package 10
- 12 -
INTERIOR PAINTS / INTERIOR PLASTERS / WALL LEVELLING AND SKIMMING / WALL PRIMING / ANCILLARY MATERIALS
ANCILLARY MATERIALS
Article name Stainless 130x270 mm trowel, notched 4x4 mm, two material handle G-11 Stainless 130x270 mm trowel, notched 6x6 mm, two material handle G-11 Stainless 130x270 mm trowel, notched 8x8 mm, two material handle G-11 Stainless 130x270 mm trowel, notched 10x10 mm, two material handle G-11 Stainless 130x270 mm trowel, notched 12x12 mm, two material handle G-11
Code BN002 BN003 BN004 BN005 BN006
pcs per package 10 10 10 10 10
Article name Stainless 130x480 mm oat, two material handle G-12
Code BN007
pcs per package 10
Article name Plastic trowel 130x270 mm ABS
Code BN008
pcs per package 12
- 13 -
INTERIOR PAINTS / INTERIOR PLASTERS / WALL LEVELLING AND SKIMMING / WALL PRIMING / ANCILLARY MATERIALS
ANCILLARY MATERIALS
Article name Hand sander 105x210 mm
Code BN009
pcs per package 20
Article name White rubber oat 140x280 mm
Code BN010
pcs per package 12
Article name Orange rubber sponge oat 140x280 mm
Code BN011
pcs per package 12
- 14 -
INTERIOR PAINTS / INTERIOR PLASTERS / WALL LEVELLING AND SKIMMING / WALL PRIMING / ANCILLARY MATERIALS
ANCILLARY MATERIALS
Article name Stainless 130x680mm, wooden handle Stainless 130x580mm, wooden handle
Code BN014 BN015
pcs per package 10 10
Article name Stainless putty knife 100mm Stainless putty knife 40mm Stainless putty knife 60mm Stainless putty knife 80mm
Code BN016 BN017 BN018 BN019
pcs per package 20 20 20 20
Article name Stainless putty knife 130x90mm
Code BN020
pcs per package 20
- 15 -
INTERIOR PAINTS / INTERIOR PLASTERS / WALL LEVELLING AND SKIMMING / WALL PRIMING / ANCILLARY MATERIALS
ANCILLARY MATERIALS
Article name Stainless putty knife 350x90mm
Code BN021
pcs per package 30
Article name SzpachlaStainless nierdzewna 350mm 350mm tapingfasadowa, knife, twouchwyt material dwuskładnikowy handle G-14 G-14 SzpachlaStainless nierdzewna 500mm 500mm tapingfasadowa, knife, twouchwyt material dwuskładnikowy handle G-14 G-14 SzpachlaStainless nierdzewna 600mm 600mm tapingfasadowa, knife, twouchwyt material dwuskładnikowy handle G-14 G-14
Code BN022 533 BN023 534 BN024 535
pcs per package 10 10 10
Article name Universal combination tool
Code BN025
pcs per package 20
- 16 -
INTERIOR PAINTS / INTERIOR PLASTERS / WALL LEVELLING AND SKIMMING / WALL PRIMING / ANCILLARY MATERIALS
ANCILLARY MATERIALS
Article name Stainless triangular brick trowel 200x190mm, wooden handle
Code BN026
pcs per package 10
Article name Stainless bucket trowel 115x160x90, wooden handle Stainless bucket trowel 120x180x80, wooden handle Stainless bucket trowel 120x180x90, wooden handle
Code BN027 BN028 BN029
pcs per package 20 20 20
Article name Stainless internal angled trowel 75x110 mm, wooden handle Stainless internal angled trowel 97x120 mm, wooden handle
Code BN030 BN031
pcs per package 20 20
- 17 -
INTERIOR PAINTS / INTERIOR PLASTERS / WALL LEVELLING AND SKIMMING / WALL PRIMING / ANCILLARY MATERIALS
ANCILLARY MATERIALS
Article name Angle sash brush professional 1,5 x 18 mm Angle sash brush professional 2 x 18 mm Angle sash brush professional 2,5 x 18 mm Angle sash brush professional 3 x 18 mm
Code BN097 BN098 BN099 BN100
pcs per package 12/72 12/48 12/24 12/24
Article name Radiator brush “Extra” 25x8 mm Radiator brush “Extra” 36x8 mm Radiator brush “Extra” 50x8 mm Radiator brush “Extra” 63x8 mm
Code BN101 BN102 BN103 BN104
pcs per package 12/72 12/60 12/48 12/36
Article name Chip brush KUBALA professional 30mm Chip brush KUBALA professional 40mm Chip brush KUBALA professional 50mm Chip brush KUBALA professional 60mm Chip brush KUBALA professional 70mm
Code BN105 BN106 BN107 BN108 BN109
pcs per package 12 12 12 12 12
- 19 -
INTERIOR PAINTS / INTERIOR PLASTERS / WALL LEVELLING AND SKIMMING / WALL PRIMING / ANCILLARY MATERIALS
ANCILLARY MATERIALS
Code BN037 BN038 BN039 BN040
pcs per package
Article name nishing darby 1000mm nishing darby 1500mm nishing darby 2000mm nishing darby 2500mm
Code BN041 BN042 BN043 BN044
pcs per package 1 1 1 1
Article name Round paint brush “Extra” Φ 20 mm Round paint brush “Extra” Φ 30 mm Round paint brush “Extra” Φ 40 mm Round paint brush “Extra” Φ 50 mm Round paint brush “Extra” Φ 60 mm
Code BN092 BN093 BN094 BN095 BN096
pcs per package 12/120 12/60 6/36 3/18 3/15
Article name Aluminium featheredge darby 1000 mm Aluminium featheredge darby 1500 mm Aluminium featheredge darby 2000 mm Aluminium featheredge darby 2500 mm
Aluminium Aluminium Aluminium Aluminium
- 18 -
1 1 1 1
INTERIOR PAINTS / INTERIOR PLASTERS / WALL LEVELLING AND SKIMMING / WALL PRIMING / ANCILLARY MATERIALS
ANCILLARY MATERIALS
Article name Chip brush KUBALA professional 30mm Chip brush KUBALA professional 40mm Chip brush KUBALA professional 50mm Chip brush KUBALA professional 60mm Chip brush KUBALA professional 70mm
Code BN110 BN111 BN112 BN113 BN114
pcs per package 12 12 12 12 12
Article name Chip brush KUBALA waterborne 30mm Chip brush KUBALA waterborne 40mm Chip brush KUBALA waterborne 50mm Chip brush KUBALA waterborne 60mm Chip brush KUBALA waterborne 70mm
Code BN115 BN116 BN117 BN118 BN119
pcs per package 12 12 12 12 12
Article name Chip brush KUBALA for varnish stain 30mm Chip brush KUBALA for varnish stain 40mm Chip brush KUBALA for varnish stain 50mm Chip brush KUBALA for varnish stain 60mm Chip brush KUBALA for varnish stain 70mm
Code BN120 BN121 BN122 BN123 BN124
pcs per package 12 12 12 12 12
- 20 -
INTERIOR PAINTS / INTERIOR PLASTERS / WALL LEVELLING AND SKIMMING / WALL PRIMING / ANCILLARY MATERIALS
ANCILLARY MATERIALS
Article name Frame Ø 6mm, 50-70 mm Frame Ø 6mm, 100-150 mm Frame Ø 6mm, 180 mm Frame Ø 6mm, 230 mm Frame Ø 8mm, 180 mm Frame Ø 8mm, 230 mm
Code BN055 BN056 BN057 BN058 BN059 BN060
pcs per package 20 20 100 100 100 100
Article name Universal roller VESTAN 180mm Universal roller VESTAN 230mm Roller cover VESTAN 180 mm Roller cover VESTAN 230 mm
Code BN065 BN066 BN067 BN068
pcs per package 10 10 20 20
Article name Latex paint and stain roller MIKROFIBER 180 mm Latex paint and stain roller MIKROFIBER 230 mm Roller cover MIKROFIBER 180 mm Roller cover MIKROFIBER 230 mm
Code BN069 BN070 BN071 BN072
pcs per package 10 10 20 20
- 21 -
INTERIOR PAINTS / INTERIOR PLASTERS / WALL LEVELLING AND SKIMMING / WALL PRIMING / ANCILLARY MATERIALS
ANCILLARY MATERIALS
Article name Roller for thick water-based varnishes and solvents VELUR 180mm Roller for thick water-based varnishes and solvents VELUR 230mm Roller cover VELUR 180 mm Roller cover VELUR 230 mm
Code BN073 BN074 BN075 BN076
pcs per package 10 10 20 20
Article name Universal midi-sized roller ZŁOTA NITKA 100 mm Universal midi-sized roller ZŁOTA NITKA 150 mm Midi-sized roller cover ZŁOTA NITKA 100mm Midi-sized roller cover ZŁOTA NITKA 150mm
Code BN077 BN078 BN079 BN080
pcs per package 20 20 50 50
Article name Midi-sized roller for all types of varnish and aggressive paint VELUR 100mm Midi-sized roller for all types of varnish and aggressive paint VELUR 150mm Midi-sized roller cover VELUR 100mm Midi-sized roller cover VELUR 150mm
Code BN081 BN082 BN083 BN084
pcs per package 20 20 50 50
- 22 -
INTERIOR PAINTS / INTERIOR PLASTERS / WALL LEVELLING AND SKIMMING / WALL PRIMING / ANCILLARY MATERIALS
ANCILLARY MATERIALS
Article name Mortar mixing paddle 70x430mm, hexagonall shank Mortar mixing paddle 100x430mm Mortar mixing paddle 130x6050mm, thread M-14
Code BN032 BN033 BN034
pcs per package 10 10 10
Article name Paint mixing paddle 60x400mm Paint mixing paddle 80x400 mm
Code BN035 BN036
pcs per package 10 10
Article name Rolls for bucket
Code BN052
pcs per package 20
- 23 -
INTERIOR PAINTS / INTERIOR PLASTERS / WALL LEVELLING AND SKIMMING / WALL PRIMING / ANCILLARY MATERIALS
ANCILLARY MATERIALS
Article name Spiked aeration roller 110x150 mm Spiked aeration roller 110x700 mm
- 24 -
Code BN053 BN054
pcs per package 2 2
