MOST FREQUENTLY USED PAINTS

PROTECTING CUSTOMERS’ INVESTMENTS Founded in 1915 as a supplier of paints for the marine segment and heavy industry, Hempel is today a leading global company in industrial coatings. We produce and sell paints to the Marine, Protective, Container, Yacht and Decorative segments. Our coatings protect customers’ investments from the corrosive forces of nature to extend their lifetimes, reduce maintenance costs, and make them more attractive. Hempel offers high-quality anticorrosive paints intended mainly for the surface protection of steel structures in infrastructure, petrochemical plants, cranes, wind turbines, bridges, railway carriages,

chemical plants and other segments. Hempel puts emphasis on the development and delivery of economical and environmentally friendly solutions to help customers meet environmental standards while controlling costs. We also offer customised solutions based on extensive research and broad international experience. In addition to classic solvent-based paints (typically with high volume solids), the product assortment includes water-based paints and specialised paints for specific conditions. Hempel offers paints based on: silicone resins, alkyds, vinyls, acrylates, epoxy-esters, epoxides, epoxy tars, polyurethanes, zinc silicates, and silicones.

Numerous testing and research institutions have given their approval to Hempel’s paints. The products are certified for various operating conditions and meet today’s regulatory requirements.

A GUIDE TO MOST FREQUENTLY USED PAINTS This overview presents only selected paints designated for anticorrosion protection in the Protective segment. They are produced in most of Hempel’s plants and are widely available. Paints for other purposes, products unique to the assortment of individual production plants, and custom coatings are not included here. To obtain detailed information, specifications and pricing for a particular project, please contact your local Hempel representative or the nearest Hempel office shown on the back cover of this publication.

Alkyds Product

Description

Recommended use

Finish Colours/ shade nos.

Volume solids, %

Film thickness (DFT)

Theoretical spreading rate

V.O.C

Surface preparation

Thinner

HEMPALIN PRIMER 12050

HEMPALIN PRIMER 12050 is a relatively quick-drying, zinc phosphate primer, based on long oil alkyd and urethane alkyd.

General purpose primer for HEMPALIN systems for protection of steel in mild to medium atmospheric corrosive environments.

Flat Green/40760 -Red/50410

49 ± 1

40 micron

12.3 m²/litre

415 g/litre

min. Sa 2

08230

HEMPAQUICK PRIMER 13624

HEMPAQUICK PRIMER 13624 is a very quick-drying zinc phosphate pigmented alkyd primer.

As a rust preventing primer on steel, machinery parts, etc. where quick drying is needed, both as a workshop primer for temporary protection and as a general purpose primer in fast drying alkyd-based systems for protection of steel in mild to medium atmospheric corrosive environments.

Flat Light grey/ 12170 Red/50710

47 ± 1

80 micron

5.9 m2/litre

480 g/litre

min. Sa 2

08080

HEMPEL'S SILVIUM 51570

HEMPEL'S SILVIUM 51570 is an oleoresinous general purpose aluminium paint with good light reflection.

Glossy As a finishing coat on steel and Aluminium/ woodwork exterior and interior in a mild to moderately corrosive 19000 environment where an aluminium surface or light reflection is desired, and/or for moderately hot surfaces.

38 ± 1

25 micron

15.2 m²/litre

505 g/litre

Sa 2/ St 3

Do not dilute.

HEMPALIN ENAMEL 52140

HEMPALIN ENAMEL 52140 is a glossy alkyd enamel which forms a weather resistant coating. It is flexible and resistant to salt water and spillage of mineral oil and other aliphatic hydrocarbons.

As a general purpose finishing coat in alkyd systems on exterior and interior steel and woodwork in a mildly to moderately corrosive environment. As a finishing coat in engine rooms including tank tops, main engines and auxiliary machinery.

Glossy White/10000* Black/19990*

46 ± 1

30 micron

15.3 m²/litre 14.3 m²/litre

430 g/litre 455 g/litre

Application for clean and dry surface.

08230

HEMPALIN DECKPAINT 53370

HEMPALIN DECKPAINT 53370 NON-SKID is an alkyd paint containing an antislip aggregate. It is quick drying, hard-wearing and resistant to sunlight, salt water and oil splashes, but not to aromatic hydrocarbons.

As a skid-proof finishing coat on steel decks, stairways, footbridges, indoors and outdoors, in a mildly to moderately corrosive marine environment.

Flat Green/40640* Red/50630*

43 ± 1

30 micron

14.3 m²/litre

476 g/litre 479 g/litre

Application for clean and dry surface.

08080

HEMPAQUICK ENAMEL 53840

HEMPAQUICK ENAMEL 53840 is a quick drying alkyd enamel with good gloss and colour retention

Glossy As a topcoat on steel in a mild White/10000* to moderately corrosive environment. In case of line application of small items to be packed together, HEMPALIN ENAMEL 52140 or HEMPALIN DECK PAINT 53240 is recommended.

40 ± 1

10.0 m²/litre

545 g/litre

Application for clean and dry surface.

08080

Product

Description

Recommended use

FinishColours/ shade nos.

Volume solids, %

Film thickness (DFT)

Theoretical spreading rate

V.O.C

Surface preparation

Thinner

HEMPATEX HI-BUILD 46410

HEMPATEX HI-BUILD 46410 is physically drying high build paint with good colour retention as a flat finish. Based on acrylic resin and non-chlorinated plasticiser. Contains zinc phosphate. Resistant to salt water, splashes of aliphatic hydrocarbons, animal and vegetable oils.

1. As a primer, intermediate or finishing coat in HEMPATEXsystems in a moderately corrosive environment. 2. As a selfprimed repair and touch-up coating for containers as well as other cases where a fast and economic repair job is desired. 3. As a finishing coat for containers.

Flat Grey/11480* Red/50630*

42 ± 1

100 micron

4.2 m2/litre

515 g/litre

Sa 2½

08080

HEMPEL'S PRO ARCYLIC 55880

HEMPEL'S PRO ACRYLIC 55880 is a two-component, isocyanatefree, acrylic finishing coat with good gloss and colour retention. It is resistant to water and spillage of aliphatic hydrocarbons. Minimum curing temperature is 0°C/32°F.

As a finishing coat for protection of structural steel in a severely corrosive environment, where light-fastness and gloss retention are required.

Glossy White/10000*

60 ± 1

50 micron

12.0 m²/litre

380 g/litre

Application for clean and dry surface.

08450

Acrylics

Issued: October 2011

Acrylics Product

Description

Recommended use

FinishColours/ shade nos.

Volume solids, %

Film thickness (DFT)

Theoretical spreading rate

V.O.C

Surface preparation

Thinner

HEMPATEX ENAMEL 56360

HEMPATEX ENAMEL 56360 is a finishing coat based on acrylic resin and nonchlorinated plasticiser for optimum gloss and colour retention. Physically drying. Resistant to salt water, splashes of aliphatic hydrocarbons and animal and vegetable oils.

As an interior and exterior finishing coat in HEMPATEX systems in a moderately to severely corrosive environment.

Semi-gloss Black/19990* Orange/50040*

31 ± 1 33 ± 1

35 micron

8.9 m²/litre 9.4 m²/litre

615 g/litre 595 g/litre

Application for clean and dry surface.

08080

HEMUCRYL PRIMER HI-BUILD 18032

HEMUCRYL PRIMER HI-BUILD 18032 is a water-borne, acrylic dispersion paint with good anticorrosive properties. Especially suited for application by airless spray.

As a primer in water-borne paint systems on interior and exterior steelwork in a mildly to moderately corrosive environment. May also be used as a primer in water-borne paint systems on hot dip galvanised steel, aluminium, and stainless steel in a mildly corrosive environment.

Flat Grey/12170 Red/50710

43 ± 1

75 micron

5.7 m²/litre

45 g/litre

Sa 2½

Fresh water

HEMUCRYL ENAMEL HI-BUILD 58030

HEMUCRYL ENAMEL HI-BUILD 58030 is a water-borne, acrylic dispersion based paint. It dries to a non-yellowing and glossy coating with low dirt pick-up, good weathering properties, and high gloss retention. Especially suited for application by airless spray.

As a glossy, finishing coat in water- Glossy borne paint systems, interior and White/10000* exterior, in moderately to severely corrosive environments. For use on buildings; the relatively high resistance to diffusion of water vapour and carbon dioxide should be taken into account. For handrails and the similar, a chemically curing coating is recommended as an alternative.

44 ± 1

75 micron

5.9 m²/litre

5 g/litre

Application for clean and dry surface.

Fresh water

Product

Description

Recommended use

FinishColours/ shade nos.

Volume solids, %

Film thickness (DFT)

Theoretical spreading rate

V.O.C

Surface preparation

Thinner

HEMPADUR UNIQ 4774A

HEMPADUR UNIQ 4774A is a self-priming, two-component, high-build, pure epoxy paint, polyamide/amine cured. Abrasion and corrosion resistant.

As a universal primer or self primed, high performance coating system for wind turbine towers and wind turbine components.

Semi-gloss Cream/20450 Grey/11150

76 ± 1

150 micron

5.1 m²/litre

240 g/litre

Sa 2½, St 3

08450

HEMPADUR 1555E

HEMPADUR 1555E is a two-component polyamide adduct-cured epoxy paint. It cures to a flexible, well adhering coating with good abrasion and impact resistance. Contains zinc phosphate. Cures down to -10°C/14°F. Approved to UK Highways Agency item 110 & Network Rail items 7.1.2.

As a general purpose primer for HEMPATEX, HEMPADUR and HEMPATHANE systems on steel. May also be used as primer for hot dipped galvanised surfaces, aluminium and stainless steel.

Flat Light Beige/22430

40 ± 1

40 micron

10.0 m²/litre

530 g/litre

Sa 2½

08450

HEMPADUR 15130

HEMPADUR 15130 is a twocomponent, polyamide cured coal tar epoxy which provides a very hardwearing coating, highly resistant to seawater and mineral oils. Limited resistance to a number of solvents. Aliphatic hydrocarbons may be discoloured.

Semi-gloss As a self-priming coating system Black/19990 for long-term protection of steel and concrete in a severely corrosi- Brown/60430 ve environment. It provides excellent protection as a lining in crude and fuel oil tanks. If the exposure is acidic or a temperature gradient is developed, it is recommended to use HEMPADUR 15100. For application at lower temperatures, i.e. in the interval from -10°C/14°F to +10°C/50°F, it is recommended to use HEMPADUR LTC 15030.

70 ± 1

125 micron

5.6 m²/litre

295 g/litre 300 g/litre

Sa 2½

08450

HEMPEL'S SHOPPRIMER E 15280

HEMPEL’S SHOPPRIMER E 15280 is a two-component epoxy polyamide primer, pigmented with zincphosphate rust-inhibiting pigments. It is designed for automatic spray application as well as manual application.

As a shopprimer for protection of blast cleaned steel plate and other structural steel during the storage and building period.

22 ± 1

20-25 micron

10.5 m²/litre

640 g/litre

Sa 2½

08570

HEMPADUR PRIMER 15300

HEMPADUR PRIMER 15300 is a two-component polyamidecured epoxy primer containing zinc phosphate as corrosion inhibiting pigment. It cures to a strong and rust-preventing coating.

As a primer or intermediate Flat coat in container systems. May Red/50890 be used as a general purpose Grey/12170 epoxy primer according to painting specification.

51 ± 1

40 micron

12.8 m2/litre

445 g/litre

Sa 2½

08450

Epoxy

Issued: October 2011

Flat Red/50890

Epoxy Product

Description

Recommended use

FinishColours/ shade nos.

Volume solids, %

Film thickness (DFT)

Theoretical spreading rate

V.O.C

Surface preparation

Thinner

HEMPADUR 15553

HEMPADUR 15553 is a two-component polyamide adduct-cured epoxy paint. It cures to a flexible, well adhering coating with good abrasion and impact resistance. Contains zinc phosphate. Cures down to -10°C/14°F.

Flat As a primer for HEMPATEX, Off-white/11630 HEMPADUR and HEMPATHANE systems on hot dipped galvanised surfaces, aluminium and stainless steel in moderately corrosive environments. HEMPADUR 15553 is also suited when roughening of the surface is not possible. Please see surface preparation overleaf.

55 ± 1

50 micron

11.0 m²/litre

400 g/litre

Application for clean and dry surface.

8450

HEMPADUR FAST DRY 15560

HEMPADUR FAST DRY 15560 is a two-component, polyamine adduct cured epoxy paint with a very short drying time. Contains zinc phosphate.

As a quick drying primer or intermediate coat in HEMPADUR systems for especially fast recoatable in-shop applications. Can be used for on-site work too if VOC compliance is requested.

62 ± 1 Flat Grey 12170 - Reddish grey/12430* *Another shade: red 50630 may be available according to assortment list.

100 micron

6.2 m²/litre

330 g/litre Sa 2½ (According to EPA Fed Ref Method 24) 355 g/litre

08450

HEMPADUR 15570

HEMPADUR 15570 is a two component, polyamide-adduct cured epoxy paint, which cures to a strong and highly corrosion resistant coating, at temperatures down to -10°C/14°F. The Micaceous Iron Oxide pigmented light grey 12430 quality is also well suited for application under humid conditions, on damp steel surfaces, and may be applied on moist surfaces. Network Rail items 5.1.7.

1. As a maintenance and repair primer, intermediate, and/or finishing coat in HEMPADUR systems in a severely corrosive environment. As a finishing coat where a cosmetic appearance is of less importance. 2. As a low temperature curing epoxy primer, intermediate, and/ or finishing coat in paint systems according to specification. Well suited as a (blast) primer in coal tar epoxy systems. 3. Mist coat on GALVOSIL.

Flat Reddish grey/12430* (MI0) Red/50630* *Another shade: grey 12170 may be available according to assortment list.

54 ± 1 55 ± 1

100 micron

5.4 m2/litre 5.5 m2/litre

420 g/litre 415 g/litre

Sa 2½

08450

HEMPADUR ZINC 17320

HEMPADUR ZINC 17320 is a two-component, zinc rich epoxy primer. It cures to a hard wearing and highly weather-resistant coating. Offers cathodic protection of local mechanical damage.

As a versatile, long-term primer Flat on steel for epoxy, vinyl and acrylic Red-grey/19830 coating systems in medium to severely corrosive environments.

61 ± 1

50 micron

12.2 m²/litre

365 g/litre

Sa 2½

08450

HEMPADUR ZINC 17340

HEMPADUR ZINC 17340 is a two-component zinc rich epoxy paint. It cures to a strong and corrosion resistant coating.

1. As a "V.O.C. compliant" primer on steel in a medium to severely corrosive environment. May be applied on zinc-shopprimed steel, where damaged spots,welds etc. have been power tool cleaned. 2. For on-line application on containers. In compliance with SSPC-Paint 20, type 2, level 3.

Semi-flat Red-grey/19830

66 ± 1

50 micron

13.2 m²/litre

330 g/litre

Sa 2½

08450

HEMPADUR ZINC 17360

HEMPADUR ZINC 17360 is a two-component, zinc rich epoxy primer. It cures to a hard wearing and highly weatherresistant coating. Offers cathodic protection of local mechanical damage. Network Rail items 7.1.3.

As a "V.O.C.-compliant", versatile, long-term primer on steel for epoxy, vinyl and acrylic coating systems in medium to severely corrosive environments. In compliance with SSPC-Paint 20, type 2, level 2 and ISO 12944-5.

Flat Red-grey/19830

65 ± 1

50 micron

13.0 m²/litre

345 g/litre

Sa 2½

08450

HEMAPDUR FAST DRY 17410

HEMPADUR FAST DRY 17410 is a two-component, high build epoxy paint which combines a relatively high volume solids content with a short drying time. Contains zinc phosphate.

As a quick drying primer or intermediate coat in HEMPADUR systems, for shop and site applications.

Semi-gloss Grey/11480 - Reddish Grey/12430 (MIO version)

74 ± 1

100 micron

7.4 m2/litre

238 g/litre

Sa 2½

Depending on purpose usually less than 5% THINNER 08450.

HEMPADUR QUATTRO 17634

HEMPADUR QUATTRO 17634 is a two-component universal epoxy paint, which cures to a hard and tough coating with good resistance to abrasion, seawater and various oils.

As a universal epoxy and selfprimed high performance coating system for atmospheric or in-water service, including water ballast tanks to be coated according to IMO-PSPC requirements (Resolution MSC.215(82)). HEMPADUR QUATTRO 17634 is intended for all year application down to -10°C/14°F and for in-shop applications where fast recoating and handling is required.

Semi-flat Red/50630* * other shades according to assortment list.

72 ± 1

125 micron

5.8 m2/litre

275 g/litre

Sa 2½

08450

HEMAPDUR MULTI-STRENGTH GF 35870

HEMPADUR MULTI-STRENGTH GF 35870 is an amine-adduct cured epoxy coating - the product is reinforced with Glassflakes. It is a hard, impact and abrasion resistant coating with good resistance to sea water, mineral oils, aliphatic hydrocarbons and splashes from petrol and related products. Suitable for early water exposure and will continue to cure under water. Network Rail items 7.2.3.

As a self-primed, high build Glossy coating primarily for areas subject Black/19990 to abrasion and/or to a highly corrosive environment. E.g. splash zones, jetty pilings and working decks. Can be used as interior lining for crude oil and fuel oil storage tanks.

87 ± 1

350 microns

2.5 m2/litre

180 g/litre

Sa 2½

08450

Issued: October 2011

Epoxy Product

Description

Recommended use

FinishColours/ shade nos.

Film thickness (DFT)

Theoretical spreading rate

V.O.C

Surface preparation

Thinner

HEMPADUR 45141/3

HEMPADUR 45141/45143 is a two-component, polyamide adduct cured epoxy paint with good wetting properties and low water permeability. It is selfpriming and forms a hard and tough coating which has good resistance against abrasion and impact as well as to seawater, mineral oils, aliphatic hydrocarbons and splashes from petrol and related products. Harmless to grain cargoes.

1. As a high build primer, intermediate and/or finishing coat in (heavy duty) paint systems according to specification. (As a finishing coat where a cosmetic appearance is of less importance). 2. For repair and maintenance work at application temperatures above -10°C/15°F on hatch covers, decks, in cargo holds, etc. 3. As a ballast tank coating. HEMPADUR 45143 is intended for use in cold/temperate climates, HEMPADUR 45141 for warmer climates .

60 ± 1 Semi-gloss Red/50630* *Other shades including a MIO version, colour no. 12430, according to assortment list.

150 micron

4.0 m²/litre

380 g/litre

Sa 2½

08450

HEMAPDUR FAST DRY 45410

HEMPADUR FAST DRY 45410 is a two-component, high solid epoxy paint. Pigmented with zinc phosphate.

As a fast curing topcoat in a mild to severely corrosive environment. As one coat direct to metal in a mild corrosive environment. As a topcoat where the usual cosmetic performance of epoxy coatings is acceptable.

Semi-flat Grey/12170* *Another shade grey 11480 according to assortment list.

65 ± 1

80 micron

8.1 m²/litre

330 g/litre

Sa 2½

08450

HEMPADUR MULTI-STRENGTH 45751

HEMPADUR MULTI-STRENGTH 45751/45753 is a self-priming, two-component, highbuild, epoxy-polyamide/amine paint which cures to an abrasion and corrosion resistant coating.

As a heavy duty coating for areas exposed to abrasion and aggressive corrosive climates such as ramps, ship hulls and holds of bulk carriers. As a ballast tank coating for special purposes such as chemical carriers; carrying hot cargoes and other purposes where “pure epoxy coating” is requested. As a finishing coat where a cosmetic appearance is of less importance.

Semi-gloss

79 ± 1

200 micron

4.0 m²/litr

260 g/litre

min. Sa 2½

08450

HEMPADUR MASTIC 4588W

HEMPADUR MASTIC 4588W is a two-component high solids, high build epoxy paint. It forms a hard and tough coating, has good wetting properties and low temperature curing.

As a selfprimed paint system or as Semi-gloss an intermediate coat in heavy duty Grey/12170 paint systemsfor atmospheric exposure, where low VOC and high film build are required.Especially suited for application at low temperatures (down to -10°C/15°F) and where arelatively short recoating interval is required (one day, one coat).

80 ± 1

200 micron

4.0 m²/litre

200 g/litre

min. St 2 , min. Sa 2, preferably to Sa 2½.

Depending on purpose usually less than 5% THINNER 08450.

HEMPADUR MASTIC 45880/1

HEMPADUR MASTIC 45880/45881 is a twocomponent polyamide adduct cured, high solids, high build epoxy paint. It forms a hard and tough coating, has good wetting properties and low temperature curing. Network Rail items 7.2.2.

As a selfprimed, surface tolerant Semi-gloss paint system or as an intermediate Grey/12170* or finishing coat in heavy duty paint systems where low VOC and high film build are required. Multipurpose coating as per specification for maintenance and minor repairs in immersed areas including ballast tanks and underwater hull. Specifically in those cases where a need for fewer products outweighs more specialised coatings. Can be specified where extended recoating properties for polyurethane topcoats are requested (typically travel coating). May be used directly on cured zinc silicate (GALVOSIL products) or spray-metallised surfaces to minimise popping. As a topcoat where the usual outdoor cosmetic appearance of epoxy paints is acceptable.

80 ± 1

200 micron

4.0 m2/litre

220 g/litre

min. St 2, min. Sa 2 preferably to Sa 21/2

Depending on purpose usually less than 5% THINNER 08450.

HEMPADUR 47140

HEMPADUR 47140 is a twocomponent polyamide adducts cured, high build epoxy paint which combines a relatively high volume solids content with a short drying time. VOC compliant.

As a primer in mild to medium atmospheric environments. As an intermediate or finishing coat in epoxy systems in medium to severely corrosive atmospheric environments. As a finishing coat where the usual outdoor cosmetic appearance of epoxy paints is acceptable. May be used directly on cured zinc silicate (GALVOSIL products) or spray-metallised surfaces to minimise popping.

Semi-gloss 70 ± 1 Cream/20450 (RAL 9001) - Light grey/11150 (RAL 7035)

125 micron

5.6 m²/litre

300 g/litre

Application for clean and dry surface.

Depending on purpose usually less than 5% THINNER 08450.

HEMPADUR ZP 47940

HEMPADUR ZP 47940 is a twocomponent polyamide adduct cured, high build epoxy paint which combines a relatively high volume solids content with a short drying time. Pigmented with zincphosphate. Approved to UK Highways Agency item 111.

As a primer in epoxy systems in atmospheric exposure.

Semi-gloss Grey/12170 Red/50630

125 micron

6.1 m²/litre

245 g/litre

Sa 2½

Depending on purpose usually less than 5% THINNER 08450.

Issued: October 2011

Volume solids, %

76 ± 1

Epoxy Product

Description

Recommended use

FinishColours/ shade nos.

HEMPADUR MIO 47950

HEMPADUR MIO 47950 is a two-component polyamide adduct cured, high build epoxy paint which combines a relatively high volume solids content with a short drying time. Has a high load of MIO-pigment. Approved to UK Highways Agency item 112. Network Rail items 7.2.2.

As an intermediate or finishing coat in epoxy systems in atmospheric exposure.

HEMPADUR 47960

HEMPADUR 47960 is a twocomponent polyamide adducts cured, high build epoxy paint which combines a relatively high volume solids content with a short drying time. VOC compliant. Prolonged recoating properties. Pigmented with zinc phosphate. Network Rail items 7.1.4.

As a primer in mild to medium atmospheric environments.As an intermediate or finishing coat in epoxy systems in medium to severely corrosiveatmospheric environments.As a one coat self priming epoxy topcoat available in various shades.May be used directly on cured zinc silicate (GALVOSIL products) or spraymetallisedsurfaces to minimise popping.

Semi-gloss Grey/11480 Red/50710*) *)Other shades according to assortment list.

HEMPADUR 85671

HEMPADUR 85671 is a twocomponent, amine adduct cured phenolic epoxy (novolac) coating with very good adhesion and high temperature, water and chemical resistance.

As an interior lining in tanks, pipelines etc. for hot water, brine, crude oil, etc. For coating of potable water tanks. As a primer coat in specific painting systems.

HEMPADUR MASTIC 8588E

HEMUDUR 18500

Film thickness (DFT)

Theoretical spreading rate

V.O.C

Surface preparation

Thinner

Semi-gloss 76 ± 1 MIO grey/12130 grey/13480

125 micron

6.1 m²/litre

245 g/litre

Application for clean and dry surface.

Depending on purpose usually less than 5% THINNER 08450.

75 ± 1

125 micron

6.0 m²/litre

250 g/litre

Application for clean and dry surface.

Depending on purpose usually less than 5% THINNER 08450.

Flat 68 ± 1 Off-white/11630 Light red/50900

100 micron

6.8 m²/litre

316 g/litre

Sa 2½-3

08450

HEMPADUR MASTIC 8588E is a two-component polyamide adduct cured, high solids, high build epoxy paint. It forms a hard and tough coating, has good wetting properties and low temperature curing. Approved to UK Highways Agency item 115 / 116

Grey/17050 77 ± 1 As a selfprimed, surface tolerant Aluminium/19910 paint system or as an intermediate or finishing coat in heavy duty paint systems where low VOC and high film build are required. Multipurpose coating as per specification for maintenance including ballast tanks andunderwater hull and new steel in those cases, where a need for few products outweighs more specialised coatings.

200 micron

16.3 m²/litre

220 g/litre

Sa 2½.

Depending on purpose usually less than 5% THINNER 08450.

HEMUDUR 18500 is a water-borne two-component polyamine cured epoxy primer containing corrosive inhibiting pigment. It cures to a strong and rust-preventing coat.

In mildly to moderately corrosive environments as a general purpose primer on steel constructions (see REMARKS overleaf).

51 ± 1

75 micron

6.8 m²/litre

20 g/litre

Sa 2½

Fresh water

Flat In moderately to severely atmospheric exposure as an anti- Grey/19840 corrosive primer for waterborne paint systems. In compliance with SSPC-Paint 20, type 2, level 1 and ISO 12944-5.

51 ± 1

50 micron

10.2 m²/litre

10 g/litre

Sa 2½

Fresh water

Recommended use

FinishColours/ shade nos.

Volume solids, %

Film thickness (DFT)

Theoretical spreading rate

V.O.C

Surface preparation

Thinner

HEMPATHANE TOPCOAT HEMPATHANE TOPCOAT 55210 55210 is a two-component, glossy acrylic polyurethane coating, cured with aliphatic isocyanate, with good gloss and colour retention.

As a finishing coat for protection of structural steel in severely corrosive atmospheric environments, where light-fastness and gloss retention are required.

Glossy White/10000 Blue/30840*

51 ± 1

50 micron

10.2 m2/litre

445 g/litre

Application for clean and dry surface.

08080

HEMPATHANE HS 55610

HEMPATHANE HS 55610 is a two-component polyurethane topcoat, cured with aliphatic isocyanate, with good gloss and colour retention. Contains zinc phosphate. Network Rail items 7.3.1.

As a VOC-compliant, high-build finishing coat for protection of structural steel in corrosive environments.

Glossy White/10000*

65 ± 1

100 micron

6.5 m2/litre

330 g/litre

Application for clean and dry surface.

08080

HEMPATHANE HS 55810

HEMPATHANE HS 55810 is a two-component polyurethane topcoat, cured with aliphatic isocyanate, with very good gloss and colour retention. Network Rail items 7.3.1.

As a low VOC finishing coat for protection of structural steel in severely corrosive atmospheric environment.

Light Grey/12170*

65 ± 1

40 micron

16.3 m²/litre

335 g/litre

Application for clean and dry surface.

08880

HEMUDUR ZINC 18560 HEMUDUR ZINC 18560 is a three-component, water-borne, zinc rich epoxy primer. It cures to a strong and anticorrosive coating that offers cathodic protection of local mechanical damage.

Semi-flat Grey/12170 Red/51320

Volume solids, %

Polyurethane Product

Description

Issued: October 2011

Silicone Product

Description

Recommended use

FinishColours/ shade nos.

Volume solids, %

Film thickness (DFT)

Theoretical spreading rate

V.O.C

Surface preparation

Thinner

HEMPEL'S SILICONE ALUMINIUM 56910

HEMPEL’S SILICONE ALUMINIUM 56910 is a heat resistant aluminium pigmented polysiloxane paint.

For long-term protection of hot pipelines, exhaust pipes, smoke stacks and other hotsurfaces. In a corrosive environment see PRECEDING COAT overleaf.

Semi-flat Aluminium /19000

35 ± 1

25 micron

14.0 m²/litre

585 g/litre

Sa 2½

08080

Product

Description

Recommended use

FinishColours/ shade nos.

Volume solids, %

Film thickness (DFT)

Theoretical spreading rate

V.O.C

Surface preparation

Thinner

HEMPEL'S GALVOSIL 15700

HEMPEL’S GALVOSIL 15700 is a two-component, solventborne, self-curing, inorganic zinc silicate with outstanding resistance against weathering and abrasion. It has excellent chemical resistance within the pH range 6-9. For service temperature range, see below. Applicable by airless spray. Offers cathodic protection of local mechanical damage.

1. As a general purpose, heavyduty, rust-preventing primer. 2. As a single, complete coating for long-term protection of steel exposed to moderately to severely corrosive environments and to abrasion. 3. As a tank lining in accordance with the CARGO PROTECTION GUIDE.In compliance with SSPCPaint 20, type 1, level 1 and ISO 12944-5.

Flat Metal grey/19840

64 ± 1

50 micron

12.8 m²/litre

434 g/litre

min. Sa 2½

08700

HEMPEL'S SHOPPRIMER ZS 15890

HEMPEL’S SHOPPRIMER ZS 15890 is a two-component, solvent-borne zinc ethyl silicate shopprimer, designed for automatic spray application. Especially suited, where welding (MIG/MAG) and gas-cutting properties are of importance.

For short to medium-term protection of abrasive blast cleaned steel plates and other structural steel during the storage, fabrication, and construction periods.

Flat Reddish grey/19890 Grey/19840

28 ± 1

15 micron

18.7 m²/litre

620 g/litre

min. Sa 2½

08570 or 08700

Zinc-Si

*Wide range of colours available via Hempel's MULTI-TINT system.

Note: The data, specifications and recommendations provided in this overview of Hempel’s most frequently used protective paints are obtained from individual product data sheets. This is a summary only, not complete information and is subject to change. Therefore, it is exclusively the responsibility of the user to obtain accurate, complete and appropriate information in relation to any particular intended use of these and other Hempel products. Unless expressly agreed otherwise in writing, the products are supplied and all technical assistance is provided subject to Hempel’s general terms and conditions of sale, delivery and service. Except as expressed in said general terms and conditions, the manufacturer and seller waive all claims involving any liability, including but not limited to negligence, for all results, injury, or direct or indirect losses or damages arising from the use of the products as recommended above or otherwise. Product data are subject to change without notice and in any case should no longer be regarded as authoritative three years from the date of this information’s issue.

Issued: October 2011

Corporate Colour Equivalents RAL K-5 RAL RAL 1000 RAL 1001 RAL 1002 RAL 1003 RAL 1004 RAL 1005 RAL 1006 RAL 1007 RAL 1011 RAL 1012 RAL 1013 RAL 1014 RAL 1015 RAL 1016 RAL 1017 RAL 1018 RAL 1019 RAL 1020 RAL 1021 RAL 1023 RAL 1024 RAL 1026 RAL 1027 RAL 1028 RAL 1032 RAL 1033 RAL 1034 RAL 1035 RAL 1037 RAL 2000 RAL 2001 RAL 2002 RAL 2003 RAL 2004 RAL 2005 RAL 2007 RAL 2008 RAL 2009 RAL 2010 RAL 2011 RAL 2012 RAL 2013 RAL 3000 RAL 3001 RAL 3002 RAL 3003 RAL 3004 RAL 3005 RAL 3007 RAL 3009 RAL 3011 RAL 3012 RAL 3013 RAL 3014 RAL 3015 RAL 3016 RAL 3017 RAL 3018 RAL 3020 RAL 3022 RAL 3024 RAL 3026 RAL 3027 RAL 3031 RAL 4001 RAL 4002 RAL 4003

Hempel Colour 22500 24900 20470 27030 27040 27050 20820 27070 27110 23120 17130 20420 27150 27160 27170 27180 27190 27200 20250 27230 27240 27260 27270 27280 27320 27330 27340 19350 27370 22120 50060 57020 57030 50190 50180 57070 57080 57090 57100 57110 57120 59130 50170 57150 50740 51710 50100 51800 57370 53090 57310 57320 57330 57340 57350 57460 57470 57480 57200 57520 57540 50090 57570 57410 37010 57620 57630

RAL RAL 4004 RAL 4005 RAL 4006 RAL 4007 RAL 4008 RAL 4009 RAL 4010 RAL 4012 RAL 5000 RAL 5001 RAL 5002 RAL 5003 RAL 5004 RAL 5005 RAL 5007 RAL 5008 RAL 5009 RAL 5010 RAL 5011 RAL 5012 RAL 5013 RAL 5014 RAL 5015 RAL 5017 RAL 5018 RAL 5019 RAL 5020 RAL 5021 RAL 5022 RAL 5023 RAL 5024 RAL 6000 RAL 6001 RAL 6002 RAL 6003 RAL 6004 RAL 6005 RAL 6006 RAL 6007 RAL 6008 RAL 6009 RAL 6010 RAL 6011 RAL 6012 RAL 6013 RAL 6014 RAL 6015 RAL 6016 RAL 6017 RAL 6018 RAL 6019 RAL 6020 RAL 6021 RAL 6022 RAL 6024 RAL 6025 RAL 6026 RAL 6027 RAL 6028 RAL 6029 RAL 6032 RAL 6033 RAL 6034 RAL 7000 RAL 7001 RAL 7002 RAL 7003

Hempel Colour 57640 37050 57660 57670 57680 57690 57700 38120 37000 37020 30170 37030 37040 37150 30570 32080 32090 30180 37110 35120 33930 37140 37240 37170 45180 30350 45200 40210 37220 37230 37440 46000 40050 47020 47030 41490 47050 47060 47070 47080 47090 40220 40840 47120 41130 47140 47150 47160 42600 42170 49500 47200 47210 47220 47240 47250 47260 47270 47280 47290 47320 47330 47340 10390 10400 17020 17030

RAL RAL 7004 RAL 7005 RAL 7006 RAL 7008 RAL 7009 RAL 7010 RAL 7011 RAL 7012 RAL 7013 RAL 7015 RAL 7016 RAL 7021 RAL 7022 RAL 7023 RAL 7024 RAL 7026 RAL 7030 RAL 7031 RAL 7032 RAL 7033 RAL 7034 RAL 7035 RAL 7036 RAL 7037 RAL 7038 RAL 7039 RAL 7040 RAL 7042 RAL 7043 RAL 7044 RAL 7045 RAL 7046 RAL 7047 RAL 7048 RAL 8000 RAL 8001 RAL 8002 RAL 8003 RAL 8004 RAL 8007 RAL 8008 RAL 8011 RAL 8012 RAL 8014 RAL 8015 RAL 8016 RAL 8017 RAL 8019 RAL 8022 RAL 8023 RAL 8024 RAL 8025 RAL 8028 RAL 9001 RAL 9002 RAL 9003 RAL 9004 RAL 9005 RAL 9006 RAL 9007 RAL 9010 RAL 9011 RAL 9016 RAL 9017 RAL 9018 RAL 9022 RAL 9023

Hempel Colour 17160 17040 17060 17080 17100 17110 17120 10270 17530 10380 10520 17210 17220 13230 17240 17260 17300 17310 11320 17330 17340 11150 11730 11370 17380 17390 17700 17720 17730 17740 17750 17860 17770 17480 67000 67010 67020 67030 61810 67070 67080 67110 67120 67140 67150 60160 67170 60180 67220 67230 67240 67250 67280 20450 17620 17630 17940 19990 19000 19870 10170 17910 17760 17970 17980 19360 19230

Tilsvarende Hempel kulør. RAL K-5 RAL RAL 1000 RAL 1001 RAL 1002 RAL 1003 RAL 1004 RAL 1005 RAL 1006 RAL 1007 RAL 1011 RAL 1012 RAL 1013 RAL 1014 RAL 1015 RAL 1016 RAL 1017 RAL 1018 RAL 1019 RAL 1020 RAL 1021 RAL 1023 RAL 1024 RAL 1026 RAL 1027 RAL 1028 RAL 1032 RAL 1033 RAL 1034 RAL 1035 RAL 1037 RAL 2000 RAL 2001 RAL 2002 RAL 2003 RAL 2004 RAL 2005 RAL 2007 RAL 2008 RAL 2009 RAL 2010 RAL 2011 RAL 2012 RAL 2013 RAL 3000 RAL 3001 RAL 3002 RAL 3003 RAL 3004 RAL 3005 RAL 3007 RAL 3009 RAL 3011 RAL 3012 RAL 3013 RAL 3014 RAL 3015 RAL 3016 RAL 3017 RAL 3018 RAL 3020 RAL 3022 RAL 3024 RAL 3026 RAL 3027 RAL 3031 RAL 4001 RAL 4002 RAL 4003

Hempel kulør 22500 24900 20470 27030 27040 27050 20820 27070 27110 23120 17130 20420 27150 27160 27170 27180 27190 27200 20250 27230 27240 27260 27270 27280 27320 27330 27340 19350 27370 22120 50060 57020 57030 50190 50180 57070 57080 57090 57100 57110 57120 59130 50170 57150 50740 51710 50100 51800 57370 53090 57310 57320 57330 57340 57350 57460 57470 57480 57200 57520 57540 50090 57570 57410 37010 57620 57630

RAL RAL 4004 RAL 4005 RAL 4006 RAL 4007 RAL 4008 RAL 4009 RAL 4010 RAL 4012 RAL 5000 RAL 5001 RAL 5002 RAL 5003 RAL 5004 RAL 5005 RAL 5007 RAL 5008 RAL 5009 RAL 5010 RAL 5011 RAL 5012 RAL 5013 RAL 5014 RAL 5015 RAL 5017 RAL 5018 RAL 5019 RAL 5020 RAL 5021 RAL 5022 RAL 5023 RAL 5024 RAL 6000 RAL 6001 RAL 6002 RAL 6003 RAL 6004 RAL 6005 RAL 6006 RAL 6007 RAL 6008 RAL 6009 RAL 6010 RAL 6011 RAL 6012 RAL 6013 RAL 6014 RAL 6015 RAL 6016 RAL 6017 RAL 6018 RAL 6019 RAL 6020 RAL 6021 RAL 6022 RAL 6024 RAL 6025 RAL 6026 RAL 6027 RAL 6028 RAL 6029 RAL 6032 RAL 6033 RAL 6034 RAL 7000 RAL 7001 RAL 7002 RAL 7003

Hempel kulør 57640 37050 57660 57670 57680 57690 57700 38120 37000 37020 30170 37030 37040 37150 30570 32080 32090 30180 37110 35120 33930 37140 37240 37170 45180 30350 45200 40210 37220 37230 37440 46000 40050 47020 47030 41490 47050 47060 47070 47080 47090 40220 40840 47120 41130 47140 47150 47160 42600 42170 49500 47200 47210 47220 47240 47250 47260 47270 47280 47290 47320 47330 47340 10390 10400 17020 17030

RAL RAL 7004 RAL 7005 RAL 7006 RAL 7008 RAL 7009 RAL 7010 RAL 7011 RAL 7012 RAL 7013 RAL 7015 RAL 7016 RAL 7021 RAL 7022 RAL 7023 RAL 7024 RAL 7026 RAL 7030 RAL 7031 RAL 7032 RAL 7033 RAL 7034 RAL 7035 RAL 7036 RAL 7037 RAL 7038 RAL 7039 RAL 7040 RAL 7042 RAL 7043 RAL 7044 RAL 7045 RAL 7046 RAL 7047 RAL 7048 RAL 8000 RAL 8001 RAL 8002 RAL 8003 RAL 8004 RAL 8007 RAL 8008 RAL 8011 RAL 8012 RAL 8014 RAL 8015 RAL 8016 RAL 8017 RAL 8019 RAL 8022 RAL 8023 RAL 8024 RAL 8025 RAL 8028 RAL 9001 RAL 9002 RAL 9003 RAL 9004 RAL 9005 RAL 9006 RAL 9007 RAL 9010 RAL 9011 RAL 9016 RAL 9017 RAL 9018 RAL 9022 RAL 9023

Hempel kulør 17160 17040 17060 17080 17100 17110 17120 10270 17530 10380 10520 17210 17220 13230 17240 17260 17300 17310 11320 17330 17340 11150 11730 11370 17380 17390 17700 17720 17730 17740 17750 17860 17770 17480 67000 67010 67020 67030 61810 67070 67080 67110 67120 67140 67150 60160 67170 60180 67220 67230 67240 67250 67280 20450 17620 17630 17940 19990 19000 19870 10170 17910 17760 17970 17980 19360 19230

Photographer: Bernd Duke

GB 10/2011 EN

HEMPEL (UK) LTD. Llantarnam Industrial Park Gwent NP44 3XF Cwmbran Tel.: +44 (01633) 874024 Fax: +44 (01633) 489089 E-mail: [email protected] www.hempel.co.uk