Installation, Operating & Programming Instructions EM-99 (SMS) Shortening Management Controller
THE UNAUTHORIZED USE OR DUPLICATION OF THE SOFTWARE DESCRIBED HEREIN, OR THIS MATERIAL, IS STRICLY PROHIBITED.
Toll-Free Technical Support 24 Hours A Day, 365 Days A Year
(from the U.S., Canada and the Caribbean)
1-800-243-9271 229-51164 Rev. H © 2000 Food Automation – Service Techniques, Inc. Pitco Lit# L20-244 Rev 0
TABLE OF CONTENTS Installation ............................................................................................................................. 3 Operational Test Procedures ............................................................................................... 4 Operating Instructions ......................................................................................................... 5-8 Programming Instructions ................................................................................................... 9-17 System Programming ........................................................................................................... 18-19 Using the Head Cycle Counter............................................................................................ 20-21 Understanding the SMS Software ....................................................................................... 22-23 Feature Descriptions............................................................................................................. 24 Customer Support................................................................................................................. 25 WARNING: This equipment generates, uses, and can radiate radio frequency energy and if not installed and used in accordance with the instruction manual, may cause interference to radio communications. It has been tested and found to comply with the limits for a Class A computing device pursuant to Subpart B of Part 15 of FCC Rules, which are designed to provide reasonable protection against such interference when operated in a commercial environment. Operation of this equipment in a residential area is likely to cause interference in which case the user at his own expense will be required to take whatever measures may be required to correct the interference. Thank you for choosing FAST. By selecting this product, you have chosen a product with over 30 years of technology and leadership behind it; a product manufactured by a company committed to quality – FAST. Please take the time now to read this instruction manual for your controller. If you have any questions, we maintain a toll-free service “help line” 24 hours a day, 365 days a year. Simply dial: 1-800-243-9271. Or send an instant email message to a FAST technician. Visit www.fastinc.com and click on the Support tab for more info.
FAST is not liable for any use of product not in accordance with FAST’s installation and operating instructions. Before using this equipment or for any questions on the operation of the appliance, consult and follow all instructions and safety warnings found in the appliance operators’ manual supplied from the manufacturer of the appliance. The information contained herein is made available for use solely by persons who have executed or are otherwise bound by the terms of (I) the Agreement for Protection of Proprietary Rights of KFC Corporation, and (ii) the FAST Standard Agreement for the Protection of Proprietary Rights. Neither this manual nor any of its contents shall be used or disclosed except in strict compliance with the terms of the agreements identified in (I) and (ii). THE UNAUTHORIZED USE OR DUPLICATION OF THE SOFTWARE DESCRIBED HEREIN, OR THIS MATERIAL, IS STRICTLY PROHIBITED.
© FAST 2000 / 229-51164 Rev. H / 000731
PAGE - 2 -
INSTALLATION Removing Existing (FASTRON.) 1. Unplug the fryer. 2. Plug the 9-pin and 2-pin connectors into the corresponding connectors in the fryer header. The 811AXMR-K8G has an additional connector. Plug it into its corresponding connector. NOTE: The 3-pin connector coming from the controller has no corresponding connector. This is reserved for future use. 3. Insert the controller into the fryer header cavity. Attach the black bezel (or frame) to the controller. 4. Secure the controller and bezel to the fryer header with the two 5/32” hex screws.
Installing The New (FASTRON.) 1. Remove the two 5/32” hex screws from the new controller. 2. Plug the 9-pin and 2-pin connectors into the corresponding connectors in the fryer header. The 811AXMR-K8G has an additional connector. Plug it into its corresponding connector. NOTE: The 3-pin connector coming from the controller has no corresponding connector. This is reserved for future use. 3. Insert the controller into the fryer header cavity. Attach the black bezel (or frame) to the controller. 4. Secure the controller and bezel to the fryer header with the two 5/32” hex screws.
The information contained herein is made available for use solely by persons who have executed or are otherwise bound by the terms of (I) the Agreement for Protection of Proprietary Rights of KFC Corporation, and (ii) the FAST Standard Agreement for the Protection of Proprietary Rights. Neither this manual nor any of its contents shall be used or disclosed except in strict compliance with the terms of the agreements identified in (I) and (ii). THE UNAUTHORIZED USE OR DUPLICATION OF THE SOFTWARE DESCRIBED HEREIN, OR THIS MATERIAL, IS STRICTLY PROHIBITED.
© FAST 2000 / 229-51164 Rev. H / 000731
PAGE - 3 -
OPERATIONAL TEST PROCEDURES Operational Test 1. 2. 3. 4. 5. 6. 7.
Plug fryer into its electrical power source. The controller will show “COOL” in the display. Turn the fryer power switch from off to on. Press “EXIT COOL” key once. Press any product key twice. The cook cycle will count down in the display. Press the product key to cancel the cook cycle.
NOTE: A cook cycle can be canceled by pressing the active product key for 3 seconds. Pressing the product key for less than 3 seconds will not cancel the cook cycle. This allows the user to wipe the overlay clean without risk of accidental canceling of the cook cycle. If the cook cycle is canceled during the first 25% of the cook time, the cook cycle simply gets canceled and the display shows “COOL.” Canceling the cook cycle during the last 75% of the cook time will automatically place the controller into the filter mode or subtract one from its cycle count toward its filter lockout. NOTE: Gas Fail (for 811AXMR-K8G on the Henny Penny Gas Model 682 only) If “GAS FAIL” shows in the display, unplug the fryer. Plug the fryer back in; it should now heat up. If “GAS FAIL” still appears in the display, gas is not getting to the igniter or the gas igniter is defective. Unplug the fryer and contact a service representative.
The information contained herein is made available for use solely by persons who have executed or are otherwise bound by the terms of (I) the Agreement for Protection of Proprietary Rights of KFC Corporation, and (ii) the FAST Standard Agreement for the Protection of Proprietary Rights. Neither this manual nor any of its contents shall be used or disclosed except in strict compliance with the terms of the agreements identified in (I) and (ii). THE UNAUTHORIZED USE OR DUPLICATION OF THE SOFTWARE DESCRIBED HEREIN, OR THIS MATERIAL, IS STRICTLY PROHIBITED.
© FAST 2000 / 229-51164 Rev. H / 000731
PAGE - 4 -
OPERATING INSTRUCTIONS (FASTRON.) ® EM-99 Shortening Management Controller for KFC When the computer displays
Press key/Action
Note
Activate SMS Default Event Times Simultaneous press of keys.
+ Simultaneous press of keys.
+
Enter Activation Code CdE2
NOTE: There are 3 different codes as follows (military time): 1890: Enters event times of 07:00 and 14:00, polish time 30 minutes **1190: Enters event times of 07:00 and 14:00, polish time 15 minutes *1490: Enters event times of 14:00 and 20:00, polish time 30 minutes
Press to enter Event Times and Time Zone programming. (Hidden key is just to the left of the TEMP key.) NOTE: User can only change time zone three (3) times. If this code is entered more than 3 times, a “bad” beep is sounded but the default values will be set. *NOTE: Codes added to software in controllers built after March 1, 2000. Controllers built prior to March 1, 2000 will sound the error tone. **NOTE: Controllers built between March 1, 2000 and July 1, 2000 will have 14:00 and 20:00 as event times 1 and 2. All controllers built after July 1, 2000 will be 07:00 and 14:00.
The information contained herein is made available for use solely by persons who have executed or are otherwise bound by the terms of (I) the Agreement for Protection of Proprietary Rights of KFC Corporation, and (ii) the FAST Standard Agreement for the Protection of Proprietary Rights. Neither this manual nor any of its contents shall be used or disclosed except in strict compliance with the terms of the agreements identified in (I) and (ii). THE UNAUTHORIZED USE OR DUPLICATION OF THE SOFTWARE DESCRIBED HEREIN, OR THIS MATERIAL, IS STRICTLY PROHIBITED.
© FAST 2000 / 229-51164 Rev. H / 000731
PAGE - 5 -
OPERATING INSTRUCTIONS (FASTRON.) ® EM-99 Shortening Management Controller for KFC When the computer displays
Press key/Action
Note Press to “toggle” between choices.
NOTE: Can only be changed 3 times.
EASt (Eastern) Cntr (Central) tAin (Mountain) Pac (Pacific) Press to Exit. Shortening Management is now active and will force a polish when the internal real time clock matches the program values using the code above.
USING AUTO POLISH This first message appears when the scheduled polish time is reached. The key-press is for acknowledgement.
PLSH
The message will flash if the shortening temperature is low. Remember to stir periodically during this warm-up period. This key-press is to cancel the audible alarm.
PLSH (flashing) Strt PLSH + audible alarm Switch fryer power OFF.
Strt PLSH Strt PLSH
This key-press to start Polish.
Drain the shortening.
Strt PLSH PLSH + polish time PLSH + polish time
After you drain the shortening, the polish timer will begin to count down.
Insert polish powder. Turn ON filter. Wait until timer expires.
The information contained herein is made available for use solely by persons who have executed or are otherwise bound by the terms of (I) the Agreement for Protection of Proprietary Rights of KFC Corporation, and (ii) the FAST Standard Agreement for the Protection of Proprietary Rights. Neither this manual nor any of its contents shall be used or disclosed except in strict compliance with the terms of the agreements identified in (I) and (ii). THE UNAUTHORIZED USE OR DUPLICATION OF THE SOFTWARE DESCRIBED HEREIN, OR THIS MATERIAL, IS STRICTLY PROHIBITED.
© FAST 2000 / 229-51164 Rev. H / 000731
PAGE - 6 -
OPERATING INSTRUCTIONS (FASTRON.) ® EM-99 Shortening Management Controller for KFC When the computer displays
Press key/Action
FiLL? + audible alarm
Switch filter power OFF. This key-press is to cancel the audible alarm.
FiLL?+ audible alarm FiLL
Note
Refill fryer with shortening. Computer switches to cool mode.
FiLL
“Polish Now” with the (FASTRON.)® Controller Simultaneous press of keys. Go to the first step of the polish procedure.
+ ®
“Polish Later” with the (FASTRON.) Controller Simultaneous press of keys. (Will delay polish only if nonzero polish delay time.)
+
Display Time of Day with the (FASTRON.)® Controller
+
Momentary display (2 seconds) of the current time of day. NOTE: Will display time only if display is at “COOL” or idle.
Starting & Stopping a “Polish Now” Power switch must be OFF. Simultaneous press of keys.
+
The information contained herein is made available for use solely by persons who have executed or are otherwise bound by the terms of (I) the Agreement for Protection of Proprietary Rights of KFC Corporation, and (ii) the FAST Standard Agreement for the Protection of Proprietary Rights. Neither this manual nor any of its contents shall be used or disclosed except in strict compliance with the terms of the agreements identified in (I) and (ii). THE UNAUTHORIZED USE OR DUPLICATION OF THE SOFTWARE DESCRIBED HEREIN, OR THIS MATERIAL, IS STRICTLY PROHIBITED.
© FAST 2000 / 229-51164 Rev. H / 000731
PAGE - 7 -
OPERATING INSTRUCTIONS (FASTRON.) ® EM-99 Shortening Management Controller for KFC When the computer displays
Press key/Action
Note
Real Time Clock Programming (Military Time) –
Can Only Be Changed 5 Times NOTE: Feature not available on controllers manufactured prior to March 2000.
+
Simultaneously press SCAN and TEMP keys. Then simultaneously press SCAN and EXIT COOL keys.
+
CdE3
Clock display
Adjust military time forward using TEMP, EXIT FILL, or EXIT COOL keys. Exits Clock Programming
The information contained herein is made available for use solely by persons who have executed or are otherwise bound by the terms of (I) the Agreement for Protection of Proprietary Rights of KFC Corporation, and (ii) the FAST Standard Agreement for the Protection of Proprietary Rights. Neither this manual nor any of its contents shall be used or disclosed except in strict compliance with the terms of the agreements identified in (I) and (ii). THE UNAUTHORIZED USE OR DUPLICATION OF THE SOFTWARE DESCRIBED HEREIN, OR THIS MATERIAL, IS STRICTLY PROHIBITED.
© FAST 2000 / 229-51164 Rev. H / 000731
PAGE - 8 -
PROGRAMMING INSTRUCTIONS KFC Auto Polish Procedure With the (FASTRON.) ® EM-99 Controller When the computer displays
Press key/Action
Note
Enter Program Mode Simultaneous press of keys. Controller will beep. + Simultaneous press of keys. Controller will beep. NOTE: If you don’t see [PR-] in display, repeat these two steps.
PR-+
Programming Cook Time Press any product key. Product LED lights.
PR-#
Press the same product key again. Product LED blinks.
XX:XX (MIN:SEC)
OR
OR
Press these keys to advance to the desired time. SLOW/FAST/EXTRA FAST
PR-#
Produce LED lights. NOTE: When programming profiles, repeat from previous step until all profile times are programmed. Press SCAN key.
PR--
Press SCAN key.
XX:XX
The information contained herein is made available for use solely by persons who have executed or are otherwise bound by the terms of (I) the Agreement for Protection of Proprietary Rights of KFC Corporation, and (ii) the FAST Standard Agreement for the Protection of Proprietary Rights. Neither this manual nor any of its contents shall be used or disclosed except in strict compliance with the terms of the agreements identified in (I) and (ii). THE UNAUTHORIZED USE OR DUPLICATION OF THE SOFTWARE DESCRIBED HEREIN, OR THIS MATERIAL, IS STRICTLY PROHIBITED.
© FAST 2000 / 229-51164 Rev. H / 000731
PAGE - 9 -
PROGRAMMING INSTRUCTIONS KFC Auto Polish Procedure With the (FASTRON.) ® EM-99 Controller When the computer displays
Press key/Action
Note
Programming Action Alarms PR-#
Press any product key. Product LED lights.
XX:XX (MIN:SEC)
Action alarms are programmed in minutes and seconds.
OR
OR
Press a combination of these keys to set the first action alarm time. Press SCAN key.
:XX
OR
OR
Program the second action alarm (if applicable) using a combination of these keys. Press SCAN key.
:XX
OR
OR
Program the third action alarm (if applicable) using a combination of these keys.
PR-#
Press to exit action alarm programming.
PR--
Press a second time to exit action alarm programming.
The information contained herein is made available for use solely by persons who have executed or are otherwise bound by the terms of (I) the Agreement for Protection of Proprietary Rights of KFC Corporation, and (ii) the FAST Standard Agreement for the Protection of Proprietary Rights. Neither this manual nor any of its contents shall be used or disclosed except in strict compliance with the terms of the agreements identified in (I) and (ii). THE UNAUTHORIZED USE OR DUPLICATION OF THE SOFTWARE DESCRIBED HEREIN, OR THIS MATERIAL, IS STRICTLY PROHIBITED.
© FAST 2000 / 229-51164 Rev. H / 000731
PAGE - 10 -
PROGRAMMING INSTRUCTIONS KFC Auto Polish Procedure With the (FASTRON.) ® EM-99 Controller When the computer displays
Press key/Action
Note
Programming Temperature PR--
Press SCAN key.
PR-#
Press any product key.
XXX
OR
OR
PR-#
PR--
Press TEMP key. Currently programmed temperature will be displayed in Fahrenheit or Celsius. Program the cook temperature by using a combination of these keys. When product key is set for profiles, display will show the next profile temperature. For additional profiles, repeat from previous step until [P R - #] appears. Press to exit temperature programming.
Programming Timing Mode – Straight or Flex PR--
Press SCAN key.
PR-#
Press the product key you wish to change.
S T (Straight Time) , OR F L (Flex Time
Press the HIDDEN key. Currently programmed timing mode will be displayed. Press to toggle choices of ST (straight time) or FL (flex time).
The information contained herein is made available for use solely by persons who have executed or are otherwise bound by the terms of (I) the Agreement for Protection of Proprietary Rights of KFC Corporation, and (ii) the FAST Standard Agreement for the Protection of Proprietary Rights. Neither this manual nor any of its contents shall be used or disclosed except in strict compliance with the terms of the agreements identified in (I) and (ii). THE UNAUTHORIZED USE OR DUPLICATION OF THE SOFTWARE DESCRIBED HEREIN, OR THIS MATERIAL, IS STRICTLY PROHIBITED.
© FAST 2000 / 229-51164 Rev. H / 000731
PAGE - 11 -
PROGRAMMING INSTRUCTIONS KFC Auto Polish Procedure With the (FASTRON.) ® EM-99 Controller When the computer displays
Press key/Action
Note When product key is set for profiles, display will show ST or FL. For additional profiles, repeat from previous step until [P R - #] appears. Press SCAN key to exit timing mode programming.
PR-#
PR--
Programming Filter Lockout Per Key PR--
Press SCAN key.
PR-#
Press the product key you wish to change. Simultaneous press of keys.
+ nFiL = no filter lockout after the cycle # = number of cycles until filter lockout COOL = returns to cool after cycle Press a combination of these keys to change the value.
nFIL # CooL
OR
OR
PR-#
Press SCAN key.
PR--
Press SCAN key again.
The information contained herein is made available for use solely by persons who have executed or are otherwise bound by the terms of (I) the Agreement for Protection of Proprietary Rights of KFC Corporation, and (ii) the FAST Standard Agreement for the Protection of Proprietary Rights. Neither this manual nor any of its contents shall be used or disclosed except in strict compliance with the terms of the agreements identified in (I) and (ii). THE UNAUTHORIZED USE OR DUPLICATION OF THE SOFTWARE DESCRIBED HEREIN, OR THIS MATERIAL, IS STRICTLY PROHIBITED.
© FAST 2000 / 229-51164 Rev. H / 000731
PAGE - 12 -
PROGRAMMING INSTRUCTIONS KFC Auto Polish Procedure With the (FASTRON.) ® EM-99 Controller When the computer displays
Press key/Action
Note
Programming Head Counters PR--
Press SCAN key.
PR-#
Press the product key you wish to change. Simultaneous press of keys.
HD# +
Press a combination of these keys to change the value. OR
OR Press SCAN.
Press SCAN again.
The information contained herein is made available for use solely by persons who have executed or are otherwise bound by the terms of (I) the Agreement for Protection of Proprietary Rights of KFC Corporation, and (ii) the FAST Standard Agreement for the Protection of Proprietary Rights. Neither this manual nor any of its contents shall be used or disclosed except in strict compliance with the terms of the agreements identified in (I) and (ii). THE UNAUTHORIZED USE OR DUPLICATION OF THE SOFTWARE DESCRIBED HEREIN, OR THIS MATERIAL, IS STRICTLY PROHIBITED.
© FAST 2000 / 229-51164 Rev. H / 000731
PAGE - 13 -
PROGRAMMING INSTRUCTIONS KFC Auto Polish Procedure With the (FASTRON.) ® EM-99 Controller When the computer displays
Press key/Action
Note
Programming Pressure Solenoid * *Not available on open fryer controllers. PR--
Press SCAN key.
PR-#
Press the product key you wich to change.
P 1 – C (closed), or P 1 – O (open)
*NOTE: On some controllers, #H00 will show in the display. Press SCAN until PR-# appears. then press the HIDDEN and EXIT COOL keys. Proceed to next step. Press EXIT COOL key to toggle choices.
*+
PR-#
When product key is set to profiles, display will appear as P2-C or P2-O. Repeat from third step above for each profile until Pr-# appears.
PR--
The information contained herein is made available for use solely by persons who have executed or are otherwise bound by the terms of (I) the Agreement for Protection of Proprietary Rights of KFC Corporation, and (ii) the FAST Standard Agreement for the Protection of Proprietary Rights. Neither this manual nor any of its contents shall be used or disclosed except in strict compliance with the terms of the agreements identified in (I) and (ii). THE UNAUTHORIZED USE OR DUPLICATION OF THE SOFTWARE DESCRIBED HEREIN, OR THIS MATERIAL, IS STRICTLY PROHIBITED.
© FAST 2000 / 229-51164 Rev. H / 000731
PAGE - 14 -
PROGRAMMING INSTRUCTIONS KFC Auto Polish Procedure With the (FASTRON.) ® EM-99 Controller When the computer displays
Press key/Action
Note
Adjust the SMS Parameters Simultaneous press of keys.
+ Simultaneous press of keys.
+ Enter the 1788 code.
CdE1
Program Polish mode will be displayed.
PrPL
Press either key to change internal real time clock (military time).
irtC OR
Event Time 1 will be displayed.
Press either key to change event time 1. (Military time 00:01 to 24:00)
Eti1 OR
The information contained herein is made available for use solely by persons who have executed or are otherwise bound by the terms of (I) the Agreement for Protection of Proprietary Rights of KFC Corporation, and (ii) the FAST Standard Agreement for the Protection of Proprietary Rights. Neither this manual nor any of its contents shall be used or disclosed except in strict compliance with the terms of the agreements identified in (I) and (ii). THE UNAUTHORIZED USE OR DUPLICATION OF THE SOFTWARE DESCRIBED HEREIN, OR THIS MATERIAL, IS STRICTLY PROHIBITED.
© FAST 2000 / 229-51164 Rev. H / 000731
PAGE - 15 -
PROGRAMMING INSTRUCTIONS KFC Auto Polish Procedure With the (FASTRON.) ® EM-99 Controller When the computer displays
Press key/Action
Note Polish Time 1 will be displayed.
Press either key to change Polish Time 1. (:00 to :60 minutes)
PLt1 OR
Delay Time 1 will be displayed
Press either key to change Delay Time 1. (0 to 8 hours, or unlimited)
dyt1 OR
Event Time 2 will be displayed.
Press either key to change Event Time 2. (Military time 00:01 to 24:00)
Eti2 OR
Polish Time 2 will be displayed.
Press either key to change Polish Time 2. (:00 to :60 minutes)
PLt2 OR
The information contained herein is made available for use solely by persons who have executed or are otherwise bound by the terms of (I) the Agreement for Protection of Proprietary Rights of KFC Corporation, and (ii) the FAST Standard Agreement for the Protection of Proprietary Rights. Neither this manual nor any of its contents shall be used or disclosed except in strict compliance with the terms of the agreements identified in (I) and (ii). THE UNAUTHORIZED USE OR DUPLICATION OF THE SOFTWARE DESCRIBED HEREIN, OR THIS MATERIAL, IS STRICTLY PROHIBITED.
© FAST 2000 / 229-51164 Rev. H / 000731
PAGE - 16 -
PROGRAMMING INSTRUCTIONS KFC Auto Polish Procedure With the (FASTRON.) ® EM-99 Controller When the computer displays
Press key/Action
Note Delay Time 2 will be displayed.
Press either key to change Delay Time 2. (0 to 8 hours, or unlimited)
dyt2 OR
Program Polish mode will be displayed.
The information contained herein is made available for use solely by persons who have executed or are otherwise bound by the terms of (I) the Agreement for Protection of Proprietary Rights of KFC Corporation, and (ii) the FAST Standard Agreement for the Protection of Proprietary Rights. Neither this manual nor any of its contents shall be used or disclosed except in strict compliance with the terms of the agreements identified in (I) and (ii). THE UNAUTHORIZED USE OR DUPLICATION OF THE SOFTWARE DESCRIBED HEREIN, OR THIS MATERIAL, IS STRICTLY PROHIBITED.
© FAST 2000 / 229-51164 Rev. H / 000731
PAGE - 17 -
PROGRAMMING INSTRUCTIONS KFC Auto Polish Procedure With the (FASTRON.) ® EM-99 Controller When the computer displays
Press key/Action
Note
SYSTEM PROGRAMMING Adjust the System Parameters Simultaneous press of keys.
PrPL + Simultaneous press of keys.
+ A system tone will sound.
Pr - -
780
F
Sprn or Fall
Fahrenheit temperature mode is displayed.
Press this key to change temperature mode.
Press this key to toggle choices of Spring or Fall.
Press to display staggered time.
:00 (example)
Press this key to change Staggered Time. Time is preset at values of “:00”, “:15”, “:30”, or “:45”
The information contained herein is made available for use solely by persons who have executed or are otherwise bound by the terms of (I) the Agreement for Protection of Proprietary Rights of KFC Corporation, and (ii) the FAST Standard Agreement for the Protection of Proprietary Rights. Neither this manual nor any of its contents shall be used or disclosed except in strict compliance with the terms of the agreements identified in (I) and (ii). THE UNAUTHORIZED USE OR DUPLICATION OF THE SOFTWARE DESCRIBED HEREIN, OR THIS MATERIAL, IS STRICTLY PROHIBITED.
© FAST 2000 / 229-51164 Rev. H / 000731
PAGE - 18 -
PROGRAMMING INSTRUCTIONS KFC Auto Polish Procedure With the (FASTRON.) ® EM-99 Controller When the computer displays
Press key/Action
Note Press to display Setback Time.
Press either key to change Setback Time.
:30 (example) OR
Press to display Setback Temperature.
Press either key to change Setback Temperature.
250F OR
Press to display Global Filter Lockout.
Press either key to change Global Filter Lockout.
20 (example) OR
Simultaneous press of keys to exit programming mode.
Pr - +
The information contained herein is made available for use solely by persons who have executed or are otherwise bound by the terms of (I) the Agreement for Protection of Proprietary Rights of KFC Corporation, and (ii) the FAST Standard Agreement for the Protection of Proprietary Rights. Neither this manual nor any of its contents shall be used or disclosed except in strict compliance with the terms of the agreements identified in (I) and (ii). THE UNAUTHORIZED USE OR DUPLICATION OF THE SOFTWARE DESCRIBED HEREIN, OR THIS MATERIAL, IS STRICTLY PROHIBITED.
© FAST 2000 / 229-51164 Rev. H / 000731
PAGE - 19 -
USING THE HEAD CYCLE COUNTER Viewing/Resetting Number of Cook Cycles This feature will count the number of heads of product cooked and the number of heads cooked on the fryer. These counters will only be incremented after 25% of the cook cycle has elapsed. This will ensure that the counters represent an accurate representation of the number of heads cooked. It will protect against continually pressing a product key and against accidental cook starts. In particular, the following data is available: 1. The total number of heads cooked for the day; 2. The total number of heads cooked since the shortening was last changed; 3. The total number of cycles run (in hundreds) for the life of the controller/fryer. NOTE: The value of heads cooked for each product key may vary. Each value is preprogrammed for KFC specifications. In the event of a menu change, see the programming section of this manual to change these values.
Accessing the Product Counter from Operating Mode When the computer displays
Press key/Action
Note
Viewing Number of Heads Cooked for the Day Simultaneous press of keys.
+ XXXd
“xxx” is the number of heads cooked for the day. This counter should be cleared once a day by the user. Press to reset the counter to zero.
The information contained herein is made available for use solely by persons who have executed or are otherwise bound by the terms of (I) the Agreement for Protection of Proprietary Rights of KFC Corporation, and (ii) the FAST Standard Agreement for the Protection of Proprietary Rights. Neither this manual nor any of its contents shall be used or disclosed except in strict compliance with the terms of the agreements identified in (I) and (ii). THE UNAUTHORIZED USE OR DUPLICATION OF THE SOFTWARE DESCRIBED HEREIN, OR THIS MATERIAL, IS STRICTLY PROHIBITED.
© FAST 2000 / 229-51164 Rev. H / 000731
PAGE - 20 -
Accessing the Product Counter from Operating Mode, continued When the computer displays
Press key/Action
Note
Viewing Number of Heads Cooked Since Last Shortening Change Press to display total.
XXXh
“XXX” is the total number of heads cooked since last shortening change. The counter should be reset every time the shortening is changed. Press to reset the counter to zero.
Viewing Number of Heads Cooked (in hundreds) by the Fryer Controller Press to display total.
XXXt
“XXX” is the total number of heads cooked, in hundreds. This counter cannot be reset by the user. Press to return to normal operating mode.
The information contained herein is made available for use solely by persons who have executed or are otherwise bound by the terms of (I) the Agreement for Protection of Proprietary Rights of KFC Corporation, and (ii) the FAST Standard Agreement for the Protection of Proprietary Rights. Neither this manual nor any of its contents shall be used or disclosed except in strict compliance with the terms of the agreements identified in (I) and (ii). THE UNAUTHORIZED USE OR DUPLICATION OF THE SOFTWARE DESCRIBED HEREIN, OR THIS MATERIAL, IS STRICTLY PROHIBITED.
© FAST 2000 / 229-51164 Rev. H / 000731
PAGE - 21 -
Understanding and Utilizing the SMS Software in the EM-99 Controller Background In an effort to extend the shortening life utilized in frying of food products, as well as to improve the food quality of fried items, FAST has developed software to assist operators in a polishing routine for their shortening. Specifically, the following relates to the software designed and implemented for use at KFC in conjunction with Magnesol Filter Aid. The new EM-99 FASTRON Controller comes with the SMS software pre-installed but not active. The EM-99, therefore, will operate identically to the previous generation EM-90 controller with no change whatsoever until such time as the SMS software is activated. Users will notice that the product keys now also have a number in the lower right hand corner, as well as numbers on two of the function keys, designated numbers 0 through 9. Also, users will notice two blue triangles and two red circles for “polish now” and “polish later” functions, which are not active until such time as the SMS software has been turned on. The SMS software when turned on has the following functionality: 1.
Real Time Clock The Real Time Clock is used to track the actual time of day in the location of operation. It is programmed for Eastern Standard Time USA at our factory and can be adjusted in the field through access codes provided in the programming manual.
2.
Polish Events There are two distinct polishing events. Each polishing event is programmable for a time at which the polish commands are initiated. When initiated, the Real Time Clock tracks the actual time of day and at the programmed event time will lock the fryer into a polish routine. Prompts on the controller prompt the operator through the polish sequence for a predetermined amount of time. At the end of the polish sequence, the operator is prompted to refill the fry vat similarly to a filter lockout scenario. See user instructions for further details on the operation of the polish software with the step-by-step instructions taking you through a polish sequence.
Please see programming instructions if provided to you for information regarding how to program the various aspects of the SMS polish lockout software.
The information contained herein is made available for use solely by persons who have executed or are otherwise bound by the terms of (I) the Agreement for Protection of Proprietary Rights of KFC Corporation, and (ii) the FAST Standard Agreement for the Protection of Proprietary Rights. Neither this manual nor any of its contents shall be used or disclosed except in strict compliance with the terms of the agreements identified in (I) and (ii). THE UNAUTHORIZED USE OR DUPLICATION OF THE SOFTWARE DESCRIBED HEREIN, OR THIS MATERIAL, IS STRICTLY PROHIBITED.
© FAST 2000 / 229-51164 Rev. H / 000731
PAGE - 22 -
Definition of Terms Polish: The circulation of the shortening through the filter for a period of time, as opposed to filtering which passes the shortening through the filter only once.
Polish Event: There are 2 events. An event is a polish sequence. Daylight Savings Time: Some countries have a one hour change to their clocks in the Spring and Fall to allow for more daylight hours. Spring / Fall programming as described in this manual allows the operator to quickly and easily change the time by one hour without accessing the other polish programmable parameters.
Stagger Times: (This is for the 2nd event only) Some operators prefer all the fryers to enter polish at the same time. In this case, all fryers start beeping at the same time and the need to polish is obvious. The delay command can then be used to delay those fryers that are needed for cooking. Other operators prefer a staggering of the Polish activation time (less noise in the kitchen, and can polish in a sequence). Staggered time programming as described in this manual allows the operator to quickly and easily customize their preference without accessing the other polish programmable parameters. Staggers are available in 15-minute increments from the set polish time up 45 minutes.
Polish Now: The “polish now” command is active at all times once the event times are activated. If a Polish Now is entered and completed within 3 hours of a scheduled event polish time, the event polish time will be canceled. This allows an operator to polish a fryer and get credit for the polish before the actual polish command sounds. This is useful in a store with many fryers where the operator wants to "get ahead" of the polish work if they have time available.
Polish Later: The polish later command is active at all times UNLESS the delay time is programmed to ZERO. The polish later command is used if a fryer has entered the polish command, yet it is needed to produce product at that time. The delay time programmed will start counting, and at the end of the delay time the operator will be forced to polish the shortening. The delay can only be activated once.
Turn On SMS Default Event Times: This code will activate the SMS function and set the default times of the two polish events. Note there are 2 code options, one for morning and afternoon, and the other for afternoon and evening. The codes can only be used three times. After that, to change, you will need to enter complete programming instructions to make any modifications.
Turn Off SMS Default Event Times: You must enter the complete programming area and set the event times 1 and 2 to 00:00.
FEATURE DESCRIPTIONS Secure Filter Lockout After a predetermined number of cook cycles, the controller will automatically go to Filter Lockout. Once the filtering is complete, FILL will appear in the display. Press EXIT FILL to exit to Filter mode. The controller will then default to COOL mode. Press EXIT COOL to return to the operating mode. See programming instructions to adjust the predetermined number of cycles.
Global Filter Lockout
This is the maximum number of cycles cooked allowed system wide before mandatory Filter Lockout is engaged. See programming instructions to adjust pre-determined number of cycles system wide.
Forced Filter Lockout During the operating mode, pressing the EXIT FILL key for 3 seconds will force the fryer and controller to lock out. Once the filtering is complete, press the EXIT FILL key to return to COOL mode.
Cool Mode Automatically goes to the Cool or Stand-by mode after filtering. This mode conserves energy and shortening. Press the EXIT COOL key to return to the operating mode.
Fryer Recovery Test From the fryer start up, the (FASTRON.) automatically tracks the amount of time it takes the fryer to heat up. The (FASTRON.) starts tracking the time from 250 degrees Fahrenheit until the fryer reaches 300 degrees Fahrenheit. This helps to determine the fryer’s efficiency. This can be accessed by pressing the “HIDDEN” key. This is automatically reset on the next fryer start up.
Multiple Cook Starts Product keys with the same starting cook temperatures. All LEDs will light up, allowing any product keys with the same start temperature to be activated at the same time.
NOTE: If a product key is activated containing profiles, Multiple Cook Starts are not available.
Customer Service and Technical Assistance Our customer service department is available for orders and questions Monday through Friday between the hours of 8 AM and 5 PM EST by calling toll-free at 1-800-FASTRON (327-8766). Toll-free technical assistance is available 24 hours a day, 365 days a year by calling 1-800-243-9271 (from the U.S., Canada and the Caribbean) when help is needed immediately.
Warranty Statement FAST provides a limited one-year warranty for its products (except probes and hoses for which the period is 90 days). A copy of the exact provisions of this warranty and the other terms and conditions of sale are available upon request.
Controller Operating Environment PLEASE NOTE: The solid state components in this controller are designed to operate reliably in a temperature range up to 158°F / 70°C. Before installing this controller, it should be verified that the ambient temperature at the mounting location does not exceed 158°F / 70°C.
Patents
The products manufactured by FAST are protected under one or more of the following U.S. Patents: 4,610,238 4,742,455 4,812,963 4,920,948 5,331,575 5,542,344 5,726,424
4,644,931 4,782,445 4,864,498 5,043,860 5,485,780 5,711,606 5,730,308
4,688,475 4,812,625 4,911,068 5,171,974 5,539,671 5,723,846 5,875,430
Plus foreign patents and patents pending. Plus licensed patents: 4,437,159 4,549,527 4,672,540 4,858,119
4,663,710
Free Program for Service Exchanges FAST provides an Exchange Program, at no extra cost, if a unit should fail. In the event of failure, the Customer has the option of (1) receiving from our factory, freight prepaid, a replacement product; (2) exchanging the failed product for a replacement product at one of our authorized local service centers; or (3) selecting on-site repair or replacement of the failed unit by one of our authorized local service centers. Simply call our toll-free customer service number, 1-800-243-9271. If the customer elects to receive an exchange unit from the factory, a replacement unit will be sent immediately. Upon receipt of the replacement unit, the customer simply returns the failed unit to the factory, freight prepaid, using the same carton and packing material in which the replacement unit was shipped. The unit will be replaced free of charge, if still under warranty, and if the product shows no evidence of abuse or alteration. If the unit is not under warranty, the Customer will pay repair charges and shipping costs to and from the factory. If the Customer should elect on-site repair and the unit is under warranty, the Customer will not be required to pay the costs of reasonable on-site labor, but will be required to pay the service agency’s travel charges to and from the on-site location. Any minor adjustment or calibration and any labor costs for the replacement of probes will be made at the Customer’s expense. The FAST exchange Program is available to all FAST Domestic Customers whose account is current and applies to all (FAST.)® Timers, Computers and Controllers.
Food Automation - Service Techniques, Inc. 905 Honeyspot Road Stratford, Connecticut 06615-7147 USA Phone: Toll-Free Sales: Fax: Int'l. Callers: Web Site:
203-377-4414 800-FASTRON (1-800-327-8766) 203-377-8187 203-378-6860 www.fastinc.com
Toll-Free Technical Assistance 24 Hours a Day, 365 Days a Year from the U.S., Canada and the Caribbean: 1-800-243-9271
INTERNATIONAL OFFICES United Kingdom 31 Saffron Court Southfields Business Park Basildon Essex SS15 6SS Phone: +44-0 1268-544000 Fax: +44-0 1268-544500 Japan Futaba 4-8-1 Shinagawaku Tokyo 142-0043 Japan Phone: +81-03-5702-8221 Fax: +81-03-5702-5496 Republic of South Africa Fairland House 193 Smit Street Fairland Johannesburg 2195 Republic of South Africa Phone: +27-011-476-5568 Fax: +27-011-476-5419
Specifications subject to change without notice.
229-51164 Rev. H, 000731 Printed in the U.S.A. © 2000 Food Automation - Service Techniques, Inc.
