RoHS

EH / EH-N Miniature Lighted Pushbutton Switch

（EH type only）

EH

Only 22.5mm depth behind panel with built-in resistor Bright and Variable Illumination makes easy planning of multiple design. FEATURES Depth behind panel : Only 22.5mm LED Full-Face, Split-Face, Dual-Color, Spot Illumination available. Hi-Bright LED Super Blue, Super White, Super Green added to Red, Green, Yellow. Built-in resistor for 5V,12V,24V use. Light Cartridge is removable from front panel. Button Size : 14.2mm square type, 14.2 20.4mm rectangular type Precision-snap action switch movement with coil spring assures long life and outstanding tactile feedback. Silver Contact(Gold-Plated) and W/E Alloy #1 Cross-bar Contact provided. Accessories: Barriers, Guard Covers, Sockets, etc.

NC Switch Connection C NO

High reliability EH-N type EH-N type is enhanced the shape of crossbar contact, superior to stabilize a condition of contact compared with conventional EH type. Superior contact reliability was obtained by improving the dust resistance. EH-N type is Full-Face, Dual-Face, Split-Face illumination only. EH and EH-N type are incompatible due to different internal structure. Please combine and use a part between the same models respectively.

FEATURE (EH-N type) Dust proof structure

Dust resistance test

EH-N type prevents dust from getting inside due to removed a conventional opening, installed a quide around the switch actuation arm.

Test method: operate 5,000 frequency as rub a surface of button with towel cloth.

Actuation arm Guide

As a result of the test, EH-N type have virtually not entered fiber inside of the switch.

1

EH FEATURE (EH-N type) 

Enhanced the shape of crossbar contact (W/E Alloy #1 Cross-bar Contact)

Contact resistance test for microload

EH-N type Crossbar contact shape have upgraded for superior contact reliability obtained. Additionally, it can be obtained high reliability with stable long-term contact condition under the microload.

After the work 500,000 turns with resistance load DC5V 1mA, EH-N type is exceptionally stable for contact condition. EH-N type (Reference)

Contact resistance（mΩ）

100

W/E Alloy #1

Cross-bar Contact

80 60

MAX

40

MIN

20 0 0

0.1

0.5 1 5 10 30 Number of open-close (Ten thousand)

50

CONTACT RATING (EH-N type)  W/E Alloy #1 Cross-bar Contact

Electrical Rating Minimum Application Load

 Silver Contact (Gold-Plated)

DC30V 0.1A(Resistive)

Resistance Load (A) Closing Load / Open Load

DC Supply Voltage (V)

AC125V 0.1A(Resistive) DC5V 1mA(Resistive)

The minimum applicable load is the N-level reference value (JIS C5003). This level indicates only one ramdom failure caused by unstable contact resistance for every two million operations.



Micro Load Application Range DC

30

AC125

3 3

15

DC

8

3

5

30

2

  250 14

3

125

Silver Contact (Gold-Plated)

Voltage (V)

W/E Alloy #1 Cross-bar Contact 1

50

100

Current (mA)

Using switch rated for 3A max during the opening and closing of microload circuit, it may cause the loose connection. Please see diagram above and use switch within an acceptable range.

0.4

Microload application range changes and differs depending on the type of load, operating conditions, environment conditions.

SPECIFICATIONS (EH-N type / EH type) Silver Contact (Gold-Plated)

Contact

Electrical Rating

Insulation Resistance Dielectric Strength

W/E Alloy #1 Cross-bar Contact

AC125V,250V 3A(Resistive)

AC125V 0.1A, DC30V 0.1A(Resistive)

More than 100M at 500V DC

1000V AC RMS between NC and NO terminal 600V AC RMS between NC and NO terminal 1500V AC RMS between terminals and ground 1500V AC RMS between terminals and ground 50/60Hz for 60sec. at normal ambient temperature and humidity 50/60Hz for 60sec. at normal ambient temperature and humidity

Contact Resistance

Less than 30mV (Initial) at DC6V 1A

Less than 50mV (Initial) at DC6V 0.1A

Frequency of vibration 10 to 55 Hz, Amplitude 1.5mm (operating limit)

Vibration

30G (operating limit), 50G (sustained)

Shock resistance

Alternate Action : more than 200,000 operations Momentary Action :more than 2,000,000 operations

Mechanical Life Electrical Life

More than 100.000 operations at max. rated load

Ambient Temperature

15C to 50C 80% RH (max.)

Ambient Humidity

OPERATING CHARACTERISTICS (EH-N type / EH type) Operating Force (max.)

4.41N

Total Travel (max.)

3mm

DC Rated (Silver Contact)

Rated voltage Resistance Load (V) (A) DC

8

3

14

3

30

2

125 2

0.4

EH STRUCTURE LIGHT CARTRIDGE

LED Full-Face

LED Spot

LED Dual-Color

LAMP

BUTTON

(Poly-Carbonate) Dimple Button

FILTER

(Used for clear button)

CARTRIDGE BASE (LED mounted)

HOUSING

18.8 14.2 Sunmulon mark

2 3

*

29 22.5

14.2mm Square Button Full-Face

DIMENSIONS

Top View 2.8 16.8

0.5 *3.9 for Dimple Button

Sunmulon mark LED

2

3.6

23

5

29 22.5

14.2mm Square Button Spot

18.8 14.2

Top View 2.8

16.8

0.5

Tolerance :

3

0.4mm

EH 14.2 20.4mm Rect. Button(Full-Face)

DIMENSIONS 25 20.4

18.8 14.2

29 22.5

* 2 3

Sunmulon mark

Top View 2.8 23

0.5 16.8

25

18.8

20.4

14.2

Sunmulon mark LED

5

29 22.5

3.6

2

23

14.2 20.4mm Rect. Button(Spot)

*3.9 for Dimple Button

Top View 2.8 23

0.5 16.8

INTERNAL CONNECTION ARRANGEMENTS LED (Red, Green, Yellow) Full-Face BOTTOM VIEW

Split-Face

Dual-Color

TOP VIEW Sunmulon mark

Sunmulon mark

5V

L1

L-

L1

L2

L2 LC

LC

12V

Sunmulon mark

LL+

Sunmulon mark L2 L1

Sunmulon mark

L1

L2

LC

LC

24V

LED Full-Face (Square)

L+

Sunmulon mark

*Cannot apply built-in resistor type for 24V

Tolerance :

4

0.4mm

EH INTERNAL CONNECTION ARRANGEMENTS LED (Red, Green, Yellow) Full-Face BOTTOM VIEW

Split-Face

Dual-Color

TOP VIEW Sunmulon mark

Sunmulon mark Sunmulon mark

L2

L-

L1 L2

L+

LC

12V

LC

Sunmulon mark

Sunmulon mark

Sunmulon mark

L1 L2

L-

L1

L+

L2 LC

24V

LED Full-Face (Rectangular)

5V

L1

LC

*Cannot apply built-in resistor type for 24V

Please inquire when cathode common type needed.

Dual-Color Combination

Hi-Bright LED (Super Blue, Super White , Super Green) Square 5V

Square 12.24V

LC( )

L1

Red

LC( )

L2

Green Yellow Red

Green Yellow

Rect. 12.24V

Rect. 5V Sunmulon mark

Full-Face

L-

L-

Sunmulon mark

Sunmulon mark

L1

L2 LC

L2 L1

Sunmulon mark

L1 L2

LED Spot (Square, Rectangular) Full-Face 5V, 12V, 24V

BOTTOM VIEW

Sunmulon mark

Sunmulon mark L2 L1 LC

LC

LC

LED Spot

Sunmulon mark

L+

L+

L+

L+

L-

L-

5, 12, 24V Split-Face

Hi-Bright LED

Sunmulon mark

TOP VIEW Sunmulon mark

LL+

5

EH TERMINALS TERMINALS DIMENSIONS

TERMINALS LAYOUT (Square, Rectangular) STDP

DTDP

(BOTTOM VIEW)

INDICATOR

Sunmulon mark

NC C

L+

L-

NC C

L+

L+

NC C

L1 L2

NO

L1 L2

NC C

LC

L1 L2

NO NC C

LC

L2 NO

L1

NC C

LC

1.2, 0.9H

2.54

NO

5.08

Split-Face, Dual-Color

NO

NC C

L(+)

5.08 5.08

Sunmulon mark

BOTTOM VIEW

NO

L(-)

NC C

5.08 5.08 6.4

L-

NC C

NO

NO

L-

NC

LC

C

5.08 5.08 6.4

NO

NO

5.08

Full-Face, Spot, Lanp

BOTTOM VIEW

1.2, 0.9H

5.08 5.08

LED DATA

TERMINAL SHAPE

Red=R, Yellow=Y, Green=G , Super Blue=SB, Super White=SW, Super Green=SG

TERMINAL SHAPE

LED RATINGS

DC Supply Voltage (V) R

7.5

2

5.9

Full-face Dual-Color

1.2

0.5

2.8

#110 TAB Soldering Terminal

G

Split-Face Hi-Bright Full-face Hi-Bright Dual-Color Hi-Bright Sprit-face Spot Current Rating (mA) Current Rating (mA) R G Y SB SW SG SB SW SG SB SW SG R 5 20 12 18 10 12 18 10 G 6 9 5 10 Y 15 5 R 20 G 6 10 6 6 10 6 6 10 6 10 Y 5 R 6 10 6 6 10 6 20 G 10 Y

Y

5( 5%)

30

12( 5%)

15

24( 5%)

9

EXTERNAL RESISTOR

Switches are normally fitted with internal resistors to operate on 5,12,24V DC supply. In case of non-resistor type, suitable external current limiting resistors must be installed as shown by the table and formula. Full-Face Dual-Color ITEM

DC5V R

Max. operating current IFM (mA) 50 DC reverse voltage VR (V) Forward voltage VF (V)

10

DC12V,24V Y

R

R

G

5

25

20

25

10

10

20

20

20

10

10

10

40

DC5V,12V,24V

SW SG 40

40

5

5

3.8 7.6 8.4 7.6 3.8

4.2 3.8

2.9 2.9 3.0

30

15

12

0.66mA/ C

15

15

15

15

15

18

10

20

20

20

10

10

10

5.8 5.8 6.0 6

10

6

20

SW SG

R

G

20

10

30

20

5

5

5

5

4

2.9 2.9 3.0 10

6

5

20

10

0.13 0.4 0.26 mA/ C mA/ C mA/ C

100

100

1000

100

1000

100

10

10

10

1/20

10

1/20

10

90

90

Fig. 2

Fig. 2

Fig. 1

50

Fig. 2

1

48

0.27mA/ C

1.9 2.1 1.9

1

50

Fig. 2

48

50

VF

Vcc R

R

R

IF

Fig. 2

6

Vcc VF IF

1

Fig. 1

The value of the series resistor can be determined by the formula: Vcc

Y

20

5 6

DC5V,12V,24V

100

1

0.27mA/ C

DC12V,24V SB

0.33mA/ C

1

0.54mA/ C

SB SW SG

Spot

0.33mA/ C

IF

Fig. 1

SB

25

IF VF

DC5V

Y

20

30

Hi-Bright Full-Face Dual-Color Hi-Bright Split-Face

DC5V,12V,24V

25

Fig. 1

R Vcc

Y

50

Pulse Width PW ( S) Pulse Duty Ratio DR Lighting IFM (mA) Wiring diagram

G

40

3.8 4.2

Recommended operating current IF (mA) 30 Current Reduced Factor (Over 25 Cworking Temperature)

G

Split-Face

Vcc: Supply Voltage VF: Forward Voltage IF: Forward Current With Guard Cover

EH Panel Layout/Panel Cut Dimensions 14.2mm Square

Panel thickness: 1.0 3.2mm

18.80.1

17.1
0.15 0.1

18.80.1


0.15

17.1
18.8(n1) 0.1

18.80.1

18.8n0.5

20

24.1

20

17.1
0.15 0.1

Serial (Horizontal)

18.8n0.5

24.1
19.6(n1)1


0.15

22.4
19.6(n1) 0.1

20

With Barriers

Serial (Horizontal) Serial (Vertical)

Panel Cut Dimensions

18.80.1

Independent

Serial (Vertical)

Without Barriers

Independent

Panel Layout

24.1
19.6(n1)1

In case of Serial (Vertical) mounting, please add 002 suffix to ordering code of switch, which retaining clip come out horizontally.

Converting horizontally mounting switch to vertically mounting, just rotate retaining clip 90 for square type. And in case of rectangular type, 2pcs. of Long version retaining clips are necessary.

7

n : number of switches Tolerance : 0.4mm

EH Panel Layout / Panel Cut Dimensions 14.220.4mm Rectangular

Panel thickness: 1.0 3.2mm

Panel Cut Dimensions

18.8

Independent (Horizontal)

Panel Layout

17.1 0.1


0.15

25

18.8

25 25

23.3 0.1


0.15

18.8


0.15

17.1
18.8(n1) 0.1 18.8n0.5

In case of Serial (Vertical) mounting, please add 002 suffix to ordering code of switch, which retaining clip come out horizontally


0.15

20

17.10.1

Serial (Horizontal) Independent (Vertical)

25n0.5

Independent (Horizontal)

Serial (Vertical)

Without Barriers


0.15

23.3
25(n1) 0.1

30.3

20

30.3
25.8(n1)1

26.2

Independent (Vertical)

Serial (Horizontal)

24.1 23.3 0.1

26.2

Serial (Vertical)


0.15

With Barriers


0.15

28.6
25.8(n1) 0.1


0.15

22.4
19.6(n1) 0.1

24.1
19.6(n1)1

In case of Serial (Vertical) mounting, please add 002 suffix to ordering code of switch, which retaining clip come out horizontally

Panel Cut Dimension should be after panel paintings.

Note

more than 3.0 (more than 6.0)

0.9

more than 3.0

more than 6.0

( )Vertical Mounting

more than 6.0 (more than 3.0)

In case of Group Mounting, please leave space as below.

With Barriers

Without Barriers

n : number of switches Tolerance : 0.4mm

8

EH ACCESSORIES BARRIERS In case of mounting switches in series, Barriers can be used to prevent inadvertent pushing neighbor switch. Short Barrier 20

6

21

21

4.

4.

6

16.8

0.

PART NO.

5

5

20

16.8

2.

8

Color

Short Center Barrier

Short Side Barrier

Black

EH-1084-K

EH-1085-K

Gray

EH-1084-H

EH-1085-H

8

Long Barrier (Rectangular, Longer Side) 26.2

6

21

21

5 4.

PART NO.

5

26.2

4.

6 23

23

Color

Long Center Barrier

Black

EH-1086-K

EH-1087-K

Gray

EH-1086-H

EH-1087-H

Long Side Barrier

2.

0.

8

8

GUARD COVER Guard Cover prevents inadvertent and unintentional operations. In EH series Guard Cover should be used with Side /Center Barriers for Guard Cover. Panel cut-out dimension is same as “with barrier”. Cannot be used for Dimple Button. 14.2mm Square

14.220.4mm Rectangular

7

7

PART NO.

* The cover to be opened 180 and returned by spring force. (Square) * The cover to be opened 90 and returned by spring force. (Rectangular) 23

6

7 4.

6

16.8

0.

PART NO.

23

23

7

23

4.

EH-1081

2

8

22

6

EH-1080

Rect.

2.4

22.

.4

16.

Square

Color Center Barrier for Guard Cover Side Barrier for Guard Cover

16.8

2.

Black

EH-1091-K

EH-1092-K

Gray

EH-1091-H

EH-1092-H

8

8

Center Barrier for Guard Cover

Side Barrier for Guard Cover

Dust-Proof Cover

14.220.4mm Rectangular .1

24

30.

1

4.8

Panel Cut Dimensions
0.5

9

4.8


0.5


0.5

17.1
24.9(n1)0.1 17.10.1

.9

24

24.

17.1 0.1

14.2mm Square

PART NO 14.2mm Square DH-361

14.220.4mm Rectangular

23.3
30.1(n1)
0.5 0

EH-1083

9

Panel thickness: 1.0 2.5mm

EH ACCESSORIES SOCKET For easy maintenance. (Can be used for both square and rectangular) Soldering Terminal Full-Face, Spot

Split-Face

Dual-Color

Sunmulon mark

Sunmulon mark

NO

5.08 5.08

NO L1 NC L2 C

7.5

7.5

C LC(+) C

18.4

17.8

NC NC

14

NO LC(-)

18.4

17.8

5.08 5.08

14

NO

NC

LC

C

5.08 5.08 16.8

5.08 5.08 16.8

#110 Tab/Soldering Terminal

#110 Tab/Soldering Terminal

PART No. Application Full-Face, Spot, Lamp Split-Face, Dual-Color Split-Face 12V Split-Face 24V Dual-Color 5V Dual-Color 12V Dual-Color 24V

Resistance 0

Part No. EH-1088-1

0

EH-1088-2

510 1/4W 1.3k 1/2W 36 1/4W 270 1/4W 1.1k 1/2W

EH-3210-2A EH-3210-2B EH-3210-2C EH-3210-2D EH-3210-2E

Note Use for built-in resistor type Use for non-resistor type *Simultaneous lighting is possible. Tolerance :

0.4mm

MATRIX FITTING FRAME

(18.9n 7.4)

0.3

Switch Housing Sunmulon mark

17.6

2

18.8m

0.3

14.2mm Square

14.2 20.2mm Rectangular

0.3

Switch Housing Sunmulon mark

17.6

2

18.8m

0.3

(25.1n 7.4)

0.2

0.2

0.2

0.2

(25.1n 4.6)

(18.8m 0.2)

0.2)

(18.9n 4.6)

14.2 20.2mm Rectangular

(18.8m

Panel Cut Dimensions

14.2mm Square

10

Color 14.2mm Square 14.2 20.2mm Rectangular Black EH-1815-K EH-1610-K Gray EH-1815-H EH-1610-H = number of switch (1-15) n : number of switches (Horizontal) m : number of switches (Vertical) Panel thickness: 1.0 3.2mm Tolerance :

0.4mm

EH 2.9

0.4

12.15

*

18.35

2.9

EH-1012

0.4

EH-1018

2.9

0.4

*

2.9

*

2.15

2.5

12.15

2.9

3.6

2.5

12.15

12.15

EH -1017

5.15 18.4

18.35

2.15

* 0.4

*

5.15

*

0.4

9.2

6.1

6.1

FILTER DIMENSIONS

*

12.25

EH-1010

12.2

EH-1011

EH-1016

EH-1015

Please order replacement parts with Part No.

Button/Filter for LED Illumination

color Item 14.2mm Square Button

3.6

*LEGEND FACE

REPLACEMENT PARTS

Red

Green

Yellow

Blue

Milk-White

Clear

Concave

EH-1008-1LR

EH-1008-1LG

EH-1008-1LY

EH-1008-1LB

EH-1008-1LM

EH-1008-2C

EH-2374-2C

EH-1013-2C

EH-2375-2C

EH-1013-1LR

EH-1013-1LG

EH-1013-1LY

EH-1013-1LB

EH-1013-1LM

Square Full-Face Filter Rect. Full-Face Filter

EH-1010-LR

EH-1010-LG

EH-1010-LY

EH-1010-LB

EH-1010-LM

EH-1015-LR

EH-1015-LG

EH-1015-LY

EH-1015-LB

EH-1015-LM

Square Split-Face Filter

EH-1012-LR

EH-1012-LG

EH-1012-LY

EH-1012-LB

EH-1012-LM

Rect. Split-Face (horiz.)Filter

EH-1018-LR

EH-1018-LG

EH-1018-LY

EH-1018-LB

EH-1018-LM

Rect. Split-Face (vert.) Filter EH-1017-LR

EH-1017-LG

EH-1017-LY

EH-1017-LB

EH-1017-LM

Divider for Split-Face

Square Split-Face Rect. Split-Face(vertical) Rect. Split-Face(horizontal) EH-3182 EH-3593

Part No.

Button/Filter for Spot color

Item

Red

EH-3183 EH-3594

Green

Yellow

Milk-White

Blue

Black

Clear

14.2mm Square Button

EH-1009-R

EH-1009-G

EH-1009-Y

EH-1009-M

EH-1009-B

EH-1009-K

EH-1009-C

EH-1014-R

EH-1014-G

EH-1014-Y

EH-1014-M

EH-1014-B

EH-1014-K

EH-1014-C

Square Full-Face Filter

EH-1011-R

EH-1011-G

EH-1011-Y

EH-1011-M

EH-1011-B

EH-1011-K

EH-1016-R

EH-1016-G

EH-1016-Y

EH-1016-M

EH-1016-B

EH-1016-K

Rect. Full-Face Filter

Button/Filter for Lamp

color Item 14.2mm Square Button

Blue

Black

Clear

EH-1008-1R

EH-1008-1G

EH-1008-1Y

EH-1008-1M

EH-1008-1B

EH-1008-1K

EH-1008-2C

EH-1013-1R

EH-1013-1G

EH-1013-1Y

EH-1013-1M

EH-1013-1B

EH-1013-1K

EH-1013-2C

Square Full-Face Filter

EH-1010-R

EH-1010-G

EH-1010-Y

EH-1010-M

EH-1010-B

EH-1010-K

EH-1015-R

EH-1015-G

EH-1015-Y

EH-1015-M

EH-1015-B

EH-1015-K

Rect. Full-Face Filter

Red

Green

Yellow

Long Retaining Clip

Part No.

EH-1034-2

11

Milk-White

EH ASSEMBLY & DISASSEMBLY 2. Removing Button

1. Removing Light Cartridge

Hook fingernails at A and gently release the clip, and release another side as well.

Hang the cartridge with hooking fingernails in the groove, and pull out.

A

3. Fitting Divider (Split-Face)

4. Fitting Filter(s)

Fit divider on the groove accordingly.

Set Filter(s) as shown onto cartridge carefully, then put button on.

groove

5. Fitting Button

6. Fitting Light Cartridge

Fit the button as shown until click.

Insert Light Cartridge into Housing with right direction and push in until click.

12

EH ASSEMBLY & DISASSEMBLY 9. Installing Barriers (Independent)

Installing Barriers (Serial)

Install Side Barriers with Switch as shown.

10. Installing Dustproof Cover

Put the switch through the Frame of cover and mount on panel. And then, install transparent cap with fitting projection and groove of frame.

Install Side Barriers with Switch and install Center Barrier between Switches.

11. Fitting Socket

Insert Switch into Socket with right direction ( MULON mark of switch and socket should be same side) and push until stop.

Transparent Cap

Groove

12. Installing Guard Cover

2

Independent mounting (Fig. 1) Fit side barriers, cover and switch as shown and mount together. Fit side barriers and switches and mount on panel, and install center barriers, finally install covers with extending barriers’ head. (Fig.2)

3

5 1

1

1

2

4

3

4

2

4

Fig.1

13. LED voltage supply rating

DC voltage supply rating for LED is shown on the side of Light Cartridge.

14. Matrix Fitting Frame

Fig.2

Install switches with frame and mount on panel as shown.

24V

13

EH ORDERING CODE (EH-N type) LED Illumination

EH

N

1 2

1 2 Supply Voltage to LED

OPERATION M

Momentary

A

Alternate

1 5V Built-in Resistor 2 12V Built-in Resistor

L

Indicator

3 24V Built-in Resistor(not for Split-Face)

F

Flat Indicator

4 5V Non-Resistor, Split-Face non resistor 5 12V Non-Resistor

Button level is flat.(locked position)

6 24V Non-Resistor

CONTACT

X Without LED

0 Indicator

In case of Split-Face non resistor type, please select 4 though the circuits are same for 5, 12, 24v, for our convenience.

3 SPDT Silver (Gold-Plated) 4 DPDT Silver (Gold-Plated)

TERMINAL

5 SPDT W/E Alloy #1Crossbar 6 DPDT W/E Alloy #1Crossbar

BUTTON SHAPE ILLUMINATION TYPE S0 Square Full-Face

K0 Concave B. Square Full-Face

W0 Rect. Full-Face

K1 Concave B. Split-Face (Vert.)

S1 Square Split-Face (Vert.)

K2 Concave B. Split-Face (Horiz.)

S2 Square Split-Face (Horiz.)

K3 Concave B. Square Dual-Color

W1 Rect. Split-Face (Vert.)

N0 Concave B. Rect. Full-Face

W2 Rect. Split-Face (Horiz.)

N1 Concave B. Rect. Split-Face (Vert.)

S3 Square Dual-Color

N2 Concave B. Rect. Split-Face (Horiz.)

W3 Rect. Dual-Color

N3 Concave B. Rect. Dual-Color

Red

80

Green

90

Yellow

14

Super Blue

16 Super White 18 Super Green X

Without LED

2

K

Connector

N

Without Connector

1

Red

2

Green

3

Yellow

4 Milk White 6

Full-Face : Put color no. into the frame 1 Split-Face : Put color no. into the frame 1,2 7070 , 7080 , 7090 , 8070 , 8080 , 8090 9070 , 9080 , 9090 , 1414 , 1416 , 1418 1614 , 1616 , 1618 , 1814 , 1816 , 1818 7014 , 7016 , 7018 , 9014 , 1470 , 1670 1870 , 1490 Combination only Dual-Color : Put color no. into the frame 1,2 7080 , 8090 , 9070 , 7014 , 7016 , 7018 9014 , 1416 , 1618 , 1814 Combination only

1) In case of Split-Face, LED and Filter color location should be specified as follow:

1

PCB

FILTER COLOR

BUTTON COLOR

*

Sunmulon mark

1 2

Square Split-Face Square Split-Face (Horiz.) (Vert.)

1

2

Rect. Split-Face (Vert.)

Without Filter

Generally, in case of using color button, filters are not necessary.

Housing

R

Red

G

Green

K

Black

Y

Yellow

H

Gray

M

Milk White

B

Blue

C

Clear

Notes for Split-Face and Dual-Color Illumination type In case of using Split-Face & Dual-Color, sometimes built-in resistor type cannot be used because of heating. Please note followings:

Sunmulon mark

Sunmulon mark

Full-Face : Put color no. into the frame 1 Split-Face : Put color no. into the frame 1,2

Blue

X

NOTES

Sunmulon mark

#110 Tab, Soldering

C

Connector type can be selected only SPDT (3 or 5) and Indicator (0).

LED COLOR 70

P

1 2

1

Split-Face 5V use : Select 1 (5V built-in resistor). Simultaneous lighting is possible.

Rect. Split-Face (Horiz.)

2) In case of Split-Face, button color should be C (clear). 3) In case of Dual-Color, button should be C (clear) with Milk-White filter or Milk-White button. 4) Dimple Button type is only clear color. Therefore, button color should be C (clear). 5) Please be noted that the color of “Yellow” for LED Button Filter is actually “Orange Yellow” not Lemon Yellow. 6) If you purchase a wire harness (EH-3250-1 or EH-3520-2) separately, please specify the ordering code at the end of 0760 (without connector).

2 Dual Color

In 5V, 12V, 24V Dual-Color non resistor type, the circuit is different. Even a case of “simultaneous lighting impossible”, it is all right for couple of minutes.

14

EH ORDERING CODE 2 (EH-N type) It is possible to order individually Light Cartridge and Housing. LIGHT CARTRIDGE LED

EH

N

1 2

1 2 Supply Voltage to LED 1

S0 Square Full-Face

5V Built-in Resistor 2 12V Built-in Resistor

W0 Rect. Full-Face

3

24V Built-in Resistor(not for Split-Face)

S1 Square Split-Face (Vert.)

4

5V Non-Resistor, Split-Face non resistor

S2 Square Split-Face (Horiz.)

5

12V Non-Resistor

W1 Rect. Split-Face (Vert.)

6

24V Non-Resistor

W2 Rect. Split-Face (Horiz.)

X

Without LED

BUTTON SHAPE ILLUMINATION TYPE

In case of Split-Face non resistor type, please select 4 though the circuits are same for 5, 12, 24v, for our convenience.

S3 Square Dual-Color W3 Rect. Dual-Color

FILTER COLOR K0 Concave B. Square Full-Face

Red

K1 Concave B. Split-Face (Vert.)

Green

K2 Concave B. Split-Face (Horiz.)

Yellow

K3 Concave B. Square Dual-Color N0 Concave B. Rect. Full-Face

Milk White

N2 Concave B. Rect. Split-Face (Horiz.)

80

Green

90

Yellow

14

Super Blue

16 Super White 18 Super Green X

Without LED

Green Milk White

Full-Face : Put color no. into the frame 1 Split-Face : Put color no. into the frame 1,2 7070 , 7080 , 7090 , 8070 , 8080 , 8090 9070 , 9080 , 9090 , 1414 , 1416 , 1418 1614 , 1616 , 1618 , 1814 , 1816 , 1818 7014 , 7016 , 7018 , 9014 , 1470 , 1670 1870 , 1490 Combination only Dual-Color : Put color no. into the frame 1,2 7080 , 8090 , 9070 , 7014 , 7016 , 7018 9014 , 1416 , 1618 , 1814 Combination only

HOUSING

EH

Clear Blue X Without Button

N

TERMINAL

OPERATION M

Momentary

A

Alternate

L F

Without Filter

Yellow

LED COLOR Red

X

Red

N3 Concave B. Rect. Split-Face

70

Blue

BUTTON COLOR

N1 Concave B. Rect. Split-Face (Vert.)

Indicator Flat Indicator

P

#110 Tab/Solder

HOUSING COLOR

C

PCB

K

Black

K

Connector

H

Gray

N

Without Connector

Connector type can be selected only SPDT (3 or 5) and Indicator (0).

Button level is flat.(locked position)

CONTACT 0 Indicator 3 SPDT Silver (Gold-Plated) 4 DPDT Silver (Gold-Plated) 5 SPDT W/E Alloy #1Crossbar 6 DPDT W/E Alloy #1Crossbar

BUTTON SHAPE ILLUMINATION TYPE S

Square Lamp

S1

Square Split-Face, Dual-Color

W

Rect. Lamp

W1

Rect. Split-Face, Dual-Color

S0

Square Full-Face, Spot

SX

Square Without Lamp terminal

W0

Rect. Full-Face, Spot

WX

Rect. Without Lamp terminal

15

EH ORDERING CODE (EH type) LED Illumination

EH

1 2

1 2 Supply Voltage to LED

OPERATION M

Momentary

A

Alternate

1 5V Built-in Resistor 2 12V Built-in Resistor

L

Indicator

3 24V Built-in Resistor(not for Split-Face)

F

Flat Indicator

4 5V Non-Resistor, Split-Face non resistor 5 12V Non-Resistor

Button level is flat.(locked position)

6 24V Non-Resistor

CONTACT

In case of Split-Face non resistor type, please select 4 though the circuits are same for 5, 12, 24v, for our convenience.

0 Indicator 3 SPDT Silver (Gold-Plated)

TERMINAL

4 DPDT Silver (Gold-Plated) 5 SPDT W/E Alloy #1Crossbar

P

#110 Tab, Soldering

6 DPDT W/E Alloy #1Crossbar

C

PCB

K

Connector

N

Without Connector

BUTTON SHAPE ILLUMINATION TYPE S0 Square Full-Face

K0 Concave B. Square Full-Face

W0 Rect. Full-Face

K1 Concave B. Split-Face (Vert.)

S1 Square Split-Face (Vert.)

K2 Concave B. Split-Face (Horiz.)

Connector type can be selected only SPDT (3 or 5) and Indicator (0).

FILTER COLOR

S2 Square Split-Face (Horiz.)

K3 Concave B. Square Dual-Color

1

Red

W1 Rect. Split-Face (Vert.)

N0 Concave B. Rect. Full-Face

2

Green

W2 Rect. Split-Face (Horiz.)

N1 Concave B. Rect. Split-Face (Vert.)

3

Yellow

S3 Square Dual-Color

N2 Concave B. Rect. Split-Face (Horiz.)

4 Milk White

W3 Rect. Dual-Color

N3 Concave B. Rect. Dual-Color

6

70

Red

80

Green

90

Yellow

14

Super Blue

16 Super White 18 Super Green

Full-Face : Put color no. into the frame 1 Split-Face : Put color no. into the frame 1,2 7070 , 7080 , 7090 , 8070 , 8080 , 8090 9070 , 9080 , 9090 , 1414 , 1416 , 1418 1614 , 1616 , 1618 , 1814 , 1816 , 1818 7014 , 7016 , 7018 , 9014 , 1470 , 1670 1870 , 1490 Combination only Dual-Color : Put color no. into the frame 1,2 7080 , 8090 , 9070 , 7014 , 7016 , 7018 9014 , 1416 , 1618 , 1814 Combination only

NOTES

Sunmulon mark

BUTTON COLOR

*

2

1 2

Square Split-Face Square Split-Face (Horiz.) (Vert.)

1

Rect. Split-Face (Vert.)

G

Green

Y

Yellow

M

Milk White

B

Blue

C

Clear

Housing K

Black

H

Gray

Sunmulon mark

Sunmulon mark

2

Red

In case of using Split-Face & Dual-Color, sometimes built-in resistor type cannot be used because of heating. Please note followings: 1

1

R

Without Filter

Generally, in case of using color button, filters are not necessary.

Notes for Split-Face and Dual-Color Illumination type

1) In case of Split-Face, LED and Filter color location should be specified as follow: Sunmulon mark

Blue

X

LED COLOR

Full-Face : Put color no. into the frame 1 Split-Face : Put color no. into the frame 1,2

1 2

Split-Face 5V use : Select 1 (5V built-in resistor). Simultaneous lighting is possible.

Rect. Split-Face (Horiz.)

2) In case of Split-Face, button color should be C (clear). 3) In case of Dual-Color, button should be C (clear) with Milk-White filter or Milk-White button. 4) Dimple Button type is only clear color. Therefore, button color should be C (clear). 5) Please be noted that the color of “Yellow” for LED Button Filter is actually “Orange Yellow” not Lemon Yellow. 6) If you purchase a wire harness (EH-3250-1 or EH-3520-2) separately, please specify the ordering code at the end of 0760 (without connector).

2 Dual Color

In 5V, 12V, 24V Dual-Color non resistor type, the circuit is different. Even a case of “simultaneous lighting impossible”, it is all right for couple of minutes.

16

EH ORDERING CODE (EH type) LED SPOT

EH

OPERATION M A L F

TERMINAL

Momentary

Indicator

Button level is flat.(locked position)

0 Indicator

K

3 SPDT Silver (Gold-Plated)

W0

N

Without Connector

Connector

4

Gray

3

Green

6

Yellow

A L F

7

BUTTON COLOR R

Red Green

Rect.

Y

Yellow

M

Milk White

B K

0 3

C

4

Clear

TERMINAL

Alternate

Indicator

Flat Indicator

5 6

SPDT W/E Alloy #1Crossbar

DPDT W/E Alloy #1Crossbar

P

#110 Tab/Soldering

C

PCB

K

Connector

N

Without Connector

X

BUTTON SHAPE S

Square

W

Rect.

FILTER COLOR HOUSING COLOR

1

Red

2

Green

Gray

3

Yellow

K

H

Black

4

Lamp Voltage 0

Without Lanp Terminal

Connector type can be selected only SPDT (3 or 5) and Indicator (0).

Indicator DPDT Silver (Gold-Plated)

Without Filter

Black

EH

SPDT Silver (Gold-Plated)

Blue

Black

Blue

Momentary

CONTACT

Milk-White

6

G

Button level is flat.(locked position)

Yellow

4

OPERATION M

Red Green

2

Black

Red

5

Non-Resistor

FILTER COLOR

HOUSING COLOR

Square

LAMP

4

LED COLOR

5 SPDT W/E Alloy #1Crossbar

S0

PCB

1

H

4 DPDT Silver (Gold-Plated)

BUTTON SHAPE

5V Built-in Resistor 2 12V Built-in Resistor 3 24V Built-in Resistor

Connector type can be selected only SPDT (3 or 5) and Indicator (0).

CONTACT

6 DPDT W/E Alloy #1Crossbar

C K

Flat Indicator

1

#110 Tab/Soldering

P

Alternate

Supply Voltage to LED

6

Without Lamp

7

X Without Lamp terminal

BUTTON COLOR

17

R

Red

G

Green

Y

Yellow

M

Milk White

B K C

Blue Black Clear

Milk-White Blue Black

Without Filter

EH ORDERING CODE 2 (EH type) It is possible to order individually Light Cartridge and Housing. LIGHT CARTRIDGE LED

EH

1 2

1 2 Supply Voltage to LED 1

S0 Square Full-Face

5V Built-in Resistor 2 12V Built-in Resistor

W0 Rect. Full-Face

3

24V Built-in Resistor(not for Split-Face)

S1 Square Split-Face (Vert.)

4

5V Non-Resistor, Split-Face non resistor

S2 Square Split-Face (Horiz.)

5

12V Non-Resistor

W1 Rect. Split-Face (Vert.)

6

24V Non-Resistor

BUTTON SHAPE ILLUMINATION TYPE

In case of Split-Face non resistor type, please select 4 though the circuits are same for 5, 12, 24v, for our convenience.

W2 Rect. Split-Face (Horiz.) S3 Square Dual-Color W3 Rect. Dual-Color

FILTER COLOR Red

K0 Dimple B. Square Full-Face

Green

K1 Dimple B. Split-Face (Vert.)

Yellow

K2 Dimple B. Split-Face (Horiz.)

Milk White

K3 Dimple B. Square Dual-Color N0 Dimple B. Rect. Full-Face N1 Dimple B. Rect. Split-Face (Vert.)

BUTTON COLOR Green

N3 Dimple B. Rect. Split-Face

Yellow Milk White

LED COLOR Red

80

Green

90

Yellow

14

Super Blue

18 Super Green

NOTES 1) In case of Split-Face, LED and Filter color location should be specified as follow: Sunmulon mark

2

Clear

Full-Face : Put color no. into the frame 1 Split-Face : Put color no. into the frame 1,2 7070 , 7080 , 7090 , 8070 , 8080 , 8090 9070 , 9080 , 9090 , 1414 , 1416 , 1418 1614 , 1616 , 1618 , 1814 , 1816 , 1818 7014 , 7016 , 7018 , 9014 , 1470 , 1670 1870 , 1490 Combination only Dual-Color : Put color no. into the frame 1,2 7080 , 8090 , 9070 , 7014 , 7016 , 7018 9014 , 1416 , 1618 , 1814 Combination only

16 Super White

1

Without Filter

Red

N2 Dimple B. Rect. Split-Face (Horiz.)

70

Blue X

Sunmulon mark

1 2

Square Split-Face Square Split-Face (Horiz.) (Vert.)

1

Sunmulon mark

2

Rect. Split-Face (Vert.)

Blue X Without Button

Notes for Split-Face and Dual-Color Illumination type In case of using Split-Face & Dual-Color, sometimes built-in resistor type cannot be used because of heating. Please note followings:

Sunmulon mark

1 1

Split-Face 5V use : Select 1 (5V built-in resistor). Simultaneous lighting is possible.

2 Rect. Split-Face (Horiz.)

2) In case of Split-Face, button color should be C (clear). 3) In case of Dual-Color, button should be C (clear) with Milk-White filter or Milk-White button. 4) Dimple Button type is only clear color. Therefore, button color should be C (clear). 5) Please be noted that the color of “Yellow” for LED Button Filter is actually “Orange Yellow” not Lemon Yellow.

2 Dual Color

In 5V, 12V, 24V Dual-Color non resistor type, the circuit is different. Even a case of “simultaneous lighting impossible”, it is all right for couple of minutes.

18

EH ORDERING CODE 2 (EH type) LED SPOT

EH Supply Voltage to LED

BUTTON SHAPE S0

Square

1 5V Built-in Resistor

W0

Rect.

2 12V Built-in Resistor 3 24V Built-in Resistor 4 Non-Resistor

LED COLOR

FILTER COLOR

4

Red

5

Green

R

Red

M

6

Yellow

G

Green

B

Blue

Yellow

K

Black

BUTTON COLOR

Y

LAMP

Milk-White

Clear

C

X Without Button

1

Red

6

2

Green

7

Blue Black

3

Yellow

X

Without Filter

4

Milk-White

EH FILTER COLOR

BUTTON SHAPE S W

Square

1

Red

6

Rect.

2

Green

7

Blue Black

3

Yellow

X

Without Filter

Lamp Voltage 0

4

Without Lamp

Milk-White

BUTTON COLOR R

HOUSING

Red

A

Green

B

Blue

Yellow

K

Black

EH Indicator Flat Indicator

#110 Tab/Solder

HOUSING COLOR

C

PCB

K

Black

K

Connector

H

Gray

N

Without Connector

X

Without Lamp Terminal

Button level is flat.(locked position)

Connector type can be selected only SPDT (3 or 5) and Indicator (0).

CONTACT 0 Indicator 3 SPDT Silver (Gold-Plated) 4 DPDT Silver (Gold-Plated) 5 SPDT W/E Alloy #1Crossbar 6 DPDT W/E Alloy #1Crossbar

Clear

X Without Button

TERMINAL

Alternate

F

C

P

Momentary

L

Milk-White

Y

OPERATION M

M

G

BUTTON SHAPE ILLUMINATION TYPE S

Square Lamp

S1

Square Split-Face, Dual-Color

W

Rect. Lamp

W1

Rect. Split-Face, Dual-Color

S0

Square Full-Face, Spot

SX

Square Without Lamp terminal

W0

Rect. Full-Face, Spot

WX

Rect. Without Lamp terminal

19

EH Connector Type Without soldering, mounting and maintenance is a connector type available.

Reduced wiring

Connector type can be selected only SPDT (3 or 5) and Indicator (0). Please specify the terminal code (K).

SPECIFICATIONS Contact

Silver Contact (Gold-Plated)

Electrical Rating

W/E Alloy #1 Cross-bar Contact

AC100V 1A, DC30V 1A (Resistive)

AC100V 0.1A, DC30V 0.1A (Resistive)

More than 100M

Insulation Resistance

at 500V DC

1000V AC RMS between NC and NO terminal 600V AC RMS between NC and NO terminal 1500V AC RMS between terminals and ground 1500V AC RMS between terminals and ground 50/60Hz for 60sec. at normal ambient temperature and humidity 50/60Hz for 60sec. at normal ambient temperature and humidity

Dielectric Strength

Less than 30m (Initial) at DC6V 1A

Contact Resistance Mechanical Life

Less than 50m (Initial) at DC6V 0.1A

Momentary Action : more than 2,000,000 operations

Electrical Life

Alternate Action : more than 200,000 operations

More than 100,000 operations at max. rated load

Ambient Temperature

15C50C

Ambient Humidity

80% RH (max.)

DIMENSIONS

29.5 22.5

TOP VIEW

25 20.4

18.8 14.2

23

13.9 16.8

Dimple Button type : 3.9

Sunmulon mark

29.5 22.5

23

14.220.4mm Rect. Button

13.9 16.8

TOP VIEW

TERMINAL LAYOUT Split-Face, Dual-Color

Connector (1Housing & 6 Contact Pins) to be appended.

Sunmulon mark 5.5

6

5

5

4

4

3

3

2

2 1

Contact Pin (JST made SPH-002T-P0.5S)

Housing (JST made PHR-6)

Applicable wire : AWG#30

Wire Harness

#24

Wire : UL1061, AWG26 equivalent

1

2

6

1

Part No EH-3251

Connector

6

Sunmulon mark 5.5

Dimple Button type : 3.9

ACCESSORIES

2

Full-Face, Spot, Lamp

6 5 4 3 2 1 Pin No.

Sunmulon mark

23

14.2mm Square Button

18.8 14.2

LC NO NC COM Terminal

Connetcor for JST made (B 6B-PH-K-S)

A A length 100cm 200cm

20

Part No EH-3250-1

Pin no.

EH-3250-2

Wire Color

1

2

3

4

5

6

Brown

Red

Orange

Yellow

Green

Blue