Technical Datasheet: High-performance plastic type CP General notes • PEEK polyetheretherketone reinforced with carbon fibre • very hard, rigid, high tensile and flexural strength, very high wear resistance • high heat capability (260-300°C), good dimension stability, low thermal linear expansion coefficient • excellent resistance to chemicals and aggressive agents, excellent resistance to thermal ageing. • ESD-safe material • typical applications include handling of components in cleaning/chemical/assembly processes also at high temperature (soldering). Mechanical properties Flexural modulus +23°C: Flexural strength +23°C Tensile modulus +23°C Tensile strength +23°C: Izod - Impact strength (notched) +23°C:
21400 MPa 350 MPa 24000 MPa 190 MPa 65 J/m
Thermal properties Temp. of defl. under load (1.80 MPa): 300 °C Continuous Use Temperature 260°C Short Time Temperature 300°C Electrical properties Surface resistivity: Decay time:
106 -107 Ohm < 0.2 sec
Other properties Density 1.39 g/ccm Water absorption in water 23°C (24h) 0.01%
ISO 178 ASTM D 790 ISO 178 ASTM D 790 ISO 527 ASTM D 638 ISO 527 ASTM D 638 ISO 180/4A ASTM D 256
ISO 75 ASTM D648 20’000 h
1000-10 V
ISO 1183 ISO 62
This document contains information based on average values as obtained from the results of laboratory tests and observations made on the material. Ideal-Tek SA declines all responsibility from an improper use of the product described in this document.
Chemical Resistance Guide of CP Acids CHEMICAL Acetic Acid, 10% Conc. Acetic Acid, Conc. Acetic Acid, Glacial Acrylic Acid Aqua Regia
23°C (73°F) A A A A C
100°C (212°F) A A A A C
200°C (392°F) A C
Benzene Sulphonic Acid Benzoic Acid Boric Acid Carbolic Acid Carbonic Acid
C A A A A
A A A
-
Chloracetic Acid
A
A
-
Chlorosulfonic Acid
C
C
C
Chromic Acid, 40% Conc. Chromic Acid, Conc.
A C
C
C
Citric Acid Formic Acid
A B
A B
-
Hydrobromic Acid (100%) Hydrochloric Acid, 10% Conc.
C A
C A
C -
Hydrochloric Acid, Conc. Hydrocyanic Acid Hydrofluoric Acid (40%)
A A C
B A C
-
Hydrofluoric Acid (70%)
C
C
-
Lactic Acid Maleic Acid
A A
A A
-
Nitric Acid, 10% Conc. Nitric Acid, 30% Conc. Nitric Acid, 50% Conc. Nitric Acid, Conc. Nitrous Acid, 10% Oleic Acid Oleum
A B C C A A C
A C C C
C C C
Oxalic Acid Perchloric Acid Phosphoric Acid, 10% Conc. Phosphoric Acid, 50% Conc.
A A A A
A A A A
A A
Phosphoric Acid, 80% Conc. Phthalic Acid Picric Acid Silicic Acid Sulphuric Acid, 40% Conc. Sulphurous Acid
A A A A B C A
A A A A B C A
B C -
Tannic Acid, 10% Conc.
A
A
-
Tartaric Acid
A
A
-
This document contains information based on average values as obtained from the results of laboratory tests and observations made on the material. Ideal-Tek SA declines all responsibility from an improper use of the product described in this document.
Bases CHEMICAL Ammonia, 880
23°C (73°F) A
100°C (212°F) -
200°C (392°F) -
Ammonia, Anhydrous Ammonia, Aqueous
A A
A A
A A
Ammonium Hydroxide, 10% Conc. Ammonium Hydroxide, Conc. Calcium Hydroxide
A A A
-
-
Hydrazine
A
A
-
Magnesium Hydroxide Potassium Hydroxide, 10% Conc. Potassium Hydroxide, 70% Conc.
A A A
-
-
Sodium Hydroxide, 10% Conc. Sodium Hydroxide, 50% Conc.
A A
A A
A A
Sodium Hydroxide, Conc.
Inorganic Reagents CHEMICAL Aluminum Chloride
23°C (73°F) A
100°C (212°F) A
200°C (392°F) -
Aluminum Sulphate Alum, Saturated
A A
A A
-
Ammonium Chloride (10% Conc.) Ammonium Nitrate Antimony Trichloride Barium Salts (Chloride, Sulfide) Bleach
A A A A A
A A A A
-
Brine Bromine
A C
A C
C
Bromine (Dry) Bromine (Wet)
C C
C C
C C
Bromine Water, Saturated Calcium Bisulphide Calcium Carbonate Calcium Chloride Calcium Hypochlorite Calcium Nitrate Calcium Sulphate
A A A A A A A
A A A A A
-
Carbon Dioxide (Dry) Carbon Monoxide (Gas)
A A
A
A
Chlorine (Gas-Dry) Chlorine (Gas-Wet)
A C
A C
C -
Chlorine (Liquid) Chlorine (Wet) Copper Acetate Copper Carbonate Copper Chloride Copper Cyanide Copper Fluoride
C C A A A A A
C C A A A A A
C C -
Copper Nitrate Copper Sulphate
A A
A A
-
This document contains information based on average values as obtained from the results of laboratory tests and observations made on the material. Ideal-Tek SA declines all responsibility from an improper use of the product described in this document.
Cupric Fluoride Cupric Sulphate
A A
A A
-
Cuprous Chloride Ethylene Nitrate Ferric Chloride
A A B
A B
-
Ferric Nitrate Ferric Oxide
A A
A
-
Ferric Sulphate Ferrous Chloride Ferrous Nitrate Ferrous Sulphate
A A A A
-
-
Fluorine Hydrogen Peroxide Hydrogen Sulphide (Gas)
C A A
C A
C A
Iodine Lead Acetate
B A
A
-
Lime Magnesium Chloride
A A
A A
-
Magnesium Sulphate Mercuric Chloride
A A
A A
-
Mercurous Chloride Mercury
A A
A
-
Nickel Acetate Nickel Chloride
A A
A A
-
Nickel Nitrate
A
A
-
Nickel Salts Nickel Sulphate
A A
A
-
Nitrogen Nitrous Oxide Oxygen Ozone
A A A A
B
-
Phosphorous Chlorides Phosphorous Pentoxide Potassium Aluminium Sulphate
A A A
A A A
-
Potassium Bicarbonate Potassium Bromide
A A
A
-
Potassium Carbonate Potassium Chlorate
A A
A
-
Potassium Chloride Potassium Dichromate Potassium Ferricyanide Potassium Ferrocyanide Potassium Hydroxide
A A A A A
A A
-
Potassium Nitrate Potassium Permanganate Potassium Sulphate
A A A
A A
-
Potassium Sulphide Silicone Fluids Silver Nitrate Sodium Acetate Sodium Bicarbonate Sodium Carbonate
A A A A A A
A A A
-
Sodium Chlorate
A
A
-
This document contains information based on average values as obtained from the results of laboratory tests and observations made on the material. Ideal-Tek SA declines all responsibility from an improper use of the product described in this document.
Sodium Chloride Sodium Hypochlorite
A A
A A
-
Sodium Nitrate Sodium Nitrite Sodium Peroxide
A A A
A A
-
Sodium Salts Sodium Silicate
A A
A
-
Sodium Sulphate Sodium Sulphide Sodium Sulphite Sodium (Hot)
A A A C
A A A C
C
Stannic Chloride Stannous Chloride Steam
A A A
A A A
A
Sulphur Sulphur Chloride
A A
A A
-
Sulphur Dichloride Sulphur Dioxide
A A
A A
A
Sulphur Hexafluoride (Gas) Sulphur Trioxide
A A
A
-
Tar Tetraethyl Lead
A A
-
-
Water, Distilled Water
A A
A A
A
Water, Sea/Salt
A
A
-
Zinc Chloride Zinc Sulphate
A A
A A
-
Alcohols CHEMICAL Benzyl Alcohol
23°C (73°F) A
100°C (212°F) -
200°C (392°F) -
Butanol Cyclohexanol Ethanol Ethylene Glycol Ethylene Glycol, 50% Conc.
A A A A A
A A A
B A
Glycerol Glycols Isopropanol Methanol
A A A A
A A
-
Propanol
A
-
-
This document contains information based on average values as obtained from the results of laboratory tests and observations made on the material. Ideal-Tek SA declines all responsibility from an improper use of the product described in this document.
Aldehydes and Ketones CHEMICAL Acetaldehyde
23°C (73°F) A
100°C (212°F) A
200°C (392°F) -
Acetone Benzaldehyde
A A
A -
-
Cyclohexanone Formaldehyde Formalin
A A A
A -
-
Methylethyl Ketone (MEK)
A
B
C
N-Methyl-2-Pyrrolidone (NMP)
A
-
-
Esters CHEMICAL Aliphatic Esters Amyl Acetate
23°C (73°F) A A
100°C (212°F) A A
200°C (392°F) -
Butyl Acetate Dibutyl Phthalate
A A
-
-
Dimethyl Phthalate Dioctyl Phthalate
A A
-
-
Ethyl Acetate Oils (Di-Ester and Phosphate Ester Based)
A A
A
-
Ethers CHEMICAL
23°C (73°F)
100°C (212°F)
200°C (392°F)
Diethylether Dioxane
A A
A -
-
Ethylene Oxide (Et0) Tetrahydrofuran (THF)
A A
-
-
Organo-Nitrogen Compounds CHEMICAL Acetonitrile Aniline Dimethyl Formamide (DMF) Diethylamine Nitrobenzene Pyridine
23°C (73°F) A A A A A A
100°C (212°F) B A
200°C (392°F) -
Halogenated Organics CHEMICAL 1,2 Dichloroethane Carbon Tetrachloride Chlorobenzene Chloroform Dibromoethane
23°C (73°F) A A A A A
100°C (212°F) A A A -
200°C (392°F) -
This document contains information based on average values as obtained from the results of laboratory tests and observations made on the material. Ideal-Tek SA declines all responsibility from an improper use of the product described in this document.
Dichlorobenzene Freon* 113 (Arklone®) Trichlorotrifluoroethane
A A
-
-
Freon 114, 1, 1 Dichloro 1,2,2,2 Tetrafluoroethane Freon 12, Dichloridifluoromethane Freon 22, Chlorodifluoromethane
A A A
A
-
Freon 134a Freon 502
A A
A
-
Genklene®* (1,1,1 Trichloroethane) Methylene Chloride Perchloroethylene Trichloroethylene
A A A A
A A
-
Hydrocarbons CHEMICAL Acetylene Aromatic Solvents
23°C (73°F) A A
100°C (212°F) A A
200°C (392°F) -
Aviation Hydraulic Fluid
A
-
-
Benzene Brake Fluid (Mineral)
A A
A A
A
Brake Fluid (Polyglycol)
A
A
A
Butane Crude Oil
A A
-
-
Cyclohexane Diesel Oil
A A
A -
-
Dowtherm* G Dowtherm* HT Dowtherm* LF
B B B
-
-
Ethane Fuel Oil
A A
-
-
Gas (Manufactured) Gas (Natural) Gasoline Heptane
A A A A
-
-
Hexane Hydraulic Fluid Iso-Octane Kerosene Lubricating Oil Methane (Gas)
A A A A A A
A
A
Motor Oil
A
A
A
Naphtha Naphthalene
A A
A A
-
Oils (Petroleum) Oils (Vegetable)
A A
A A
-
Pentane Petroleum Ether Propane Skydrol* Hydraulic Fluid Styrene (Liquid)
A A A A A
A -
-
Toluene Transformer Oil Vaseline*
A A A
A -
-
This document contains information based on average values as obtained from the results of laboratory tests and observations made on the material. Ideal-Tek SA declines all responsibility from an improper use of the product described in this document.
Xylene
A
-
-
Miscellaneous Reagents CHEMICAL Adhesives (not cyanoacrylates)
23°C (73°F) A
100°C (212°F) -
200°C (392°F) -
Apple Juice Aviation Spirit Beer
A A A
A
-
Cooking Oil
A
-
-
Creosote Detergent Solutions (non-phenolic)
A A
A
-
Edible Fats and Oils Fatty Acids Fruit Juice
A A A
A A
-
Gelatin Ketchup
A A
A -
-
Linseed Oil
A
-
-
Milk Mineral Oil
A A
A -
-
Molasses
A
A
-
Olive Oil Peanut Oil
A A
A A
-
Paraffin Sewage
A A
A A
-
Soap Solution Starch Tallow
A A A
A A
-
Turpentine Urea
A A
A
-
Varnish Vinegar Wax White Spirit
A A A A
A -
-
Wines and Spirits Yeast
A A
A
-
This document contains information based on average values as obtained from the results of laboratory tests and observations made on the material. Ideal-Tek SA declines all responsibility from an improper use of the product described in this document.