Hardness testing equipment and Seismometers

Hardness testing equipment

PRE 1306

Stationary and mobile hardness testing equipment for all areas of application.

Hardness Testing Equipment

CONTENTS

Rockwell hardness testing equipment Overview· · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · 4

Measuring program for automatic indentation measurement - VLPAK· · · · · · · 28

Durotwin· · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · 5 AR, ARK and ATK overview· · · · · · · · · · · · · · · · 7 AR-10 / AR-20 · · · · · · · · · · · · · · · · · · · · · · · · · · · 8

Brinell hardness testing equipment ABK-1· · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · 29

ARK-600 / ATK-600· · · · · · · · · · · · · · · · · · · · · · · 9 WIZHARD · · · · · · · · · · · · · · · · · · · · · · · · · · · · · 10 Special accessories · · · · · · · · · · · · · · · · · · · · · · · 12

Mobile hardness testing equipment Rebound hardness testing equipment HARDMATIC HH-411· · · · · · · · · · · · · · · · · · · · · 30

Vickers hardness testing equipment

Special accessories for HARDMATIC HH-411· · 32

Overview· · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · 14 AVK-C0 · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · 15

Hardness testing equipment for foam, rubber and plastic

HV-100· · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · 16

HARDMATIC HH-300 overview · · · · · · · · · · · · 33

Special accessories · · · · · · · · · · · · · · · · · · · · · · 18

HH-300 long version· · · · · · · · · · · · · · · · · · · · · 34 HH-300 compact version · · · · · · · · · · · · · · · · · 35

Mikrovickers hardness testing equipment

Special accessories for HARDMATIC HH-300· · 36

Overview· · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · 19 HM-100 · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · 20

Conversion tables· · · · · · · · · · · · · · · · · · · · · · · 38

HM-200· · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · 23

Additional information · · · · · · · · · · · · · · · · · · 40

Special accessories · · · · · · · · · · · · · · · · · · · · · · 25

INDEX Code No. 963-102 R 963-103 810-200D 810-201D 810-218D 810-257D 810-208D 810-202D 810-203D 810-204D 810-160D 810-163D 810-981D 810-165D 810-985D 810-124D 810-125D 810-959D 810-126D 810-969D 810-128D 810-352D 810-353D VLPAK 810-265-1 810-298 811-335-1 811-337-1 811-336-1 811-338-1 811-331 811-333 811-332 811-336

Model DUROTWIN DT10 DUROTWIN-PLUS DT20 AR-10 AR-20 ARK-600 ATK-600 Wizhard HR-511 Wizhard HR-521 Wizhard HR-522 Wizhard HR-523 AVK-C0 HV-112 HV-113 HV-114 HV-115 HM-101 HM-102 HM-103 HM-112 HM-113 HM-114 HM-211 HM-221

Page 4 7 9 10 14 16

19

23

ABK-1 HH-411

28 29 30

HH-300

33

3

Rockwell Hardness Testing Equipment

963-102R : DT10 Durotwin 963-103: DT20 Durotwin Plus

810-200D: AR-10

• Sturdy and simple manual operation: Rockwell, Super Rockwell (scale N, T) and *Brinell hardness testing equipment.

• Basic model with analog display. Automatic application and retraction of the additional test force.

810-201D: AR-20

810-218D: ARK-600

• Basic model with analog display. Force is changed using the handwheel.

• The large and very clear digital display reduces reading errors.

810-257D: ATK-600

810-208D: HR-511 Wizhard 810-202D: HR-521 Wizhard 810-203D: HR-522 Wizhard 810-204D: HR-523 Wizhard

• A cost-efficient testing device that performs 2 different hardness tests: Rockwell and Super Rockwell (scale N, T).

• Three different types of hardness test: Rockwell, Super Rockwell (scale N, T) and Brinell* with one device. With extension arm for measuring inaccessible points.

* External optosensoric measurement of indentations for Brinell hardness testing!

Rockwell Hardness Testing Equipment Model DT DUROTWIN Equipment features Sturdy and easy-to-operate manual device Applicable for both Rockwell and Super Rockwell (scale N, T) testing Standard or optional use for Brinell hardness testing (external optosensoric measurement of the Brinell imprint)

Analog display of the hardness values Calibration value 0.5 HR B; C 1.0 HR N; T

Spider for applying advance test force

Hand lever for applying additional test force

DT20

DT10 Technical specifications Model

Durotwin DT10

Code No.

963-102 R Super Rockwell Rockwell (scale N, T)

Test method Advance test force

Durotwin Plus DT20

(N)

Total test force (N) Test force regulation Display Max. height of workpiece Max. depth of workpiece Weight

98,07

29,42

Rockwell

963-103 Super Rockwell (scale N, T)

98,07

29,42

Brinell -

294,2 / 306,5 / 612,9 / 1226 / 1839 Manual regulation of test force + additional test force (load, duration, disengagement)

588,4 / 980,7 / 1471

147,1 / 294,2 / 441,3

588,4 / 980,7 / 1471

147,1 / 294,2 / 441,3

Analog 105 mm (with spindle cover) 107 mm (without spindle cover)

Microscope*

150 mm (from the center of the penetrating object) 44 kg

48 kg

* Special accessory

5

Overview of test devices Model Durotwin Durotwin with Brinell retrofit package Code No. 963–102 R 963–102 R + 56AAE552 Rockwell Scales A – D – C Scales A – D – C (diamond indenter) (diamond indenter) Scales F – B – G Scales F – B – G (1/16“ steel ball indenter) (1/16“ steel ball indenter) Scales H – E – K* Scales H – E – K* (1/8“ steel ball indenter) (1/8“ steel ball indenter) Super Rockwell (scale N, T) Scales 15N – 30N – 45N Scales 15N – 30N – 45N (diamond indenter) (diamond indenter) Scales 15T – 30T – 45T Scales 15T – 30T – 45T (1/16“ steel ball indenter) (1/16“ steel ball indenter) Brinell Scale HBW1/30 – (1 mm carbide ball) Scale HBW2.5/187.5 – (2.5 mm carbide ball) – – – –

Durotwin Plus 963–103 Scales A – D – C (diamond indenter) Scales F – B – G (1/16“ steel ball indenter) Scales H – E – K* (1/8“ steel ball indenter) Scales 15N – 30N – 45N (diamond indenter) Scales 15T – 30T – 45T (1/16“ steel ball indenter) Scale HBW5/125* (5 mm carbide ball) Scale HBW2.5/187.5 (2.5 mm carbide ball) Scale HBW2.5/62.5 (2.5 mm carbide ball) Scale HBW2.5/31.25 (2.5 mm carbide ball) * Special accessory

Standard accessories

Special accessories

Code No. 19BAA072 Diamond indenter Code No. 19BAA074 Steel ball indenter 1/16“ – Steel balls 1/16“ (5 balls) – Flat table Ø 64 mm – V-Anvil Ø 41 mm, opening 25 mm – Dust protection cover – Hardness test block 60-65 HRC – Hardness test block 60-64 HR30N – Adjusting level Additional standard accessories for Durotwin Plus Code No. 19BAA279 Carbide indenter Ø 2.5 mm Code No. 19BAA283 Replacement carbide indenter Ø 2.5 mm (1 indenter) – Hardness test block 350 HBW 2.5/187.5

Code No. 19BAA072 D Diamond indenter (incl. MPA certificate) Code No. 19BAA075 Steel ball indenter 1/8“ Code No. 19BAA082 Steel balls 1/16“ (10 balls) Code No. 19BAA083 Steel balls 1/8“ (10 balls) Code No. 075202 Round table Ø 200 mm For further special accessories, see pages 12 and 13

Additional special accessories for Durotwin Plus Code No. 19BAA280 Carbide indenter Ø 5 mm Code No. 19BAA162 Replacement carbide indenter Ø 5 mm (1 indenter) Code No. 19BAA318 D Microscope   40 x Code No. 19BAA319 D Microscope 100 x

Standard accessories for Brinell retrofit package

Code No. 56AAE552 Brinell retrofit package for 963-102 R

Code No. 19BAA277 Carbide Indenter Ø 1 mm Code No. 19BAA279 Carbide Indenter Ø 2.5 mm – Hardness test block 350 HBW 2.5/187.5 – Additional weight 187.5

Rockwell Hardness Testing Equipment Model AR, ARK, ATK Equipment features Analog standard models with automatic loading, duration and disengagement of additional test force Test methods HRA, HRC, HRD (diamond cone) HRF, HRB, HRG (steel ball 1/16”) Automatic zero positioning of the analog gauge when applying test forces with the spindle wheel

AR-10 Rockwell

AR-20 Rockwell Calibration value 0.5 HR

Change of test force Manual

Change of test force Handwheel Manual advance test force Automatic additional test force

Equipment features Digital standard models with automatic loading, duration and disengagement of additional test force ATK-600 with Rockwell and Super Rockwell (scale N, T) testing Large LED display with tolerance evaluation function

ARK-600 Rockwell ATK-600 Rockwell / Super Rockwell (scale N, T) Digit increments 0.1 HR (Rockwell) 0.2 HR Super Rockwell (scale N, T) Easy operation using dust-protected control panel Sturdy spindle cover

Evaluation function OK/Not OK Manual advance test force with load navigator

Handwheel for changing test force Data output RS 232C, SPC (DIGIMATIC)

7

Rockwell Hardness Testing Equipment Model AR-10 / AR-20

AR-20

AR-10

Standard accessories Code No. 19BAA072 Diamond Indenter AR-10, AR-20 Code No. 19BAA074 1/16“ Steel ball Indenter Code No. 810-039 Flat table (Ø 64 mm) Code No. 19BAA111 Dust protection cover Code No. 19BAA123 Hardness test block (30 - 35HRC) Code No. 19BAA125 Hardness test block (60 - 65HRC) Code No. 19BAA126 Hardness test block (90 - 95HRB)

Technical specifications Code No. Model Advance test N force Total test force N Conversion of total test force Test force regulation Test force application time Display Function Max. size of workpiece Dimensions Weight Power supply

810-200D AR-10

810-201D AR-20 98,07 588,4; 980,7; 1471

Advance testforce: fixed, otherwise manual Advance testforce: fixed, using handwheel (Set by removing weights) Advance test force: Manual adjustment Additional testforce: Automatic (load, duration, disengagement) Automatic: 3 - 5 s Manual: At operator’s discretion Pointer display on scale; smallest calibration value: 0.5 HR Automatic gauge: No need for zero positioning. Height: 0 - 140 mm Height: 0 - 165 mm (standard flat table) (standard flat table)

Depth: 115 mm (from the center of the indenter shaft) approx. 215 (W) x 455 (D) x 682 (H) mm

Depth: 122 mm (from the center of the indenter shaft) approx. 210 (W) x 486 (D) x 680 (H) mm

approx. 38 kg approx. 40 kg 230V AC, approx. 30VA or less, 20VA or less for AR-10

Rockwell Hardness Testing Equipment Model AR-600 / ATK-600

ARK-600

ATK-600

Standard accessories Code No. 19BAA072 Diamond Indenter ARK-600 Code No. 19BAA073 Diamond Indenter ATK-600 Code No. 19BAA074 1/16“ steel ball Indenter Code No. 810-039 Flat table (Ø 64 mm) Code No. 19BAA111 Dust protection cover Code No. 19BAA123 Hardness test block (30 - 35HRC) Code No. 19BAA125 Hardness test block (60 - 65HRC) Code No. 19BAA126 Hardness test block (90 - 95HRB) Code No. 19BAA128 Hardness test block (64 - 69HR30N) ATK-600 Code No. 19BAA129 Hardness test block (70 - 79HR30N) ATK-600

Technical specifications Code No. Model Advance test force Total test force Conversion of total test force Test force regulation Test force application time Display Function External output Max. size of workpiece Dimensions Weight Power supply

N

810-218D ARK-600 98,07

810-257D: ATK-600 29,42, 98,07

N

558,4; 980,7; 1471

147,1; 294,2; 441,3; 588,4; 980,7; 1471

Advance testforce: fixed, otherwise rotary control Advance test force: Manual, with advance test force monitored by navigator for load application Additional testforce: Automatic (load, duration, disengagement) Automatic 3 - 5 s Manual: At operator’s discretion Digital 4-digit LED display Digital 4-digit LED display Resolution: Rockwell / 0.1 HR Resolution: 0.1 HR Super Rockwell (scale N, T) / 0.2 HR OK/Not OK evaluation function/Navigator function for force application / Correction function for hardness value RS-232C / SPC (DIGIMATIC) Height: 0 - 140 mm (standard flat table) 10 - 150 mm (optional round table) Depth: 122 mm (from the center of the indenter shaft) approx. 210 (W) x 486 (D) x 680 (H) mm

approx. 210 (W) x 486 (D) x 720 (H) mm

approx. 40 kg

approx. 42 kg 230V AC, approx. 30VA or less

9

Rockwell Hardness Testing Equipment Model HR Wizhard The HR-500 series comprises the latest hardness testing equipment fitted with special electronic control to measure 3 different types of hardness: Rockwell, Super Rockwell (scale N, T) and the indenting process for Brinell hardness testing.

Equipment features Various test forces for Rockwell, Super Rockwell (scale N, T) and Brinell Electronic real-time load control for precise setting – this prevents the application of excessive test force Auto-stop elevator with automatic application of advance test force Spout-shaped extending arm for better access to inner and outer surfaces Graphic presentation of statistical results and a wide range of statistics. OK/Not OK evaluation function Automatic test force selection: The required hardness test is defined in advance and the test force selected automatically.

Control unit with membrane keypad • The machine allows hardness testing on inner surfaces, which was previously not possible without causing damage. The smallest measurable diameter is 34 mm (standard) using the special diamond indenter (19BAA292 optional accessory)

Indenter

Indenter

Indenter

• The control panel can be installed on top of the test machine, which is very useful in cramped spaces. This installation requires a special mounting plate (19BAA295 optional accessory)

With touch screen (Touch- sensitive control panel)

Control unit with membrane keypad • Simple control panel offering only the most important basic functions. With touch screen • Control panel offering a wide range of functions, various statistical calculation models and graphic presentation of the test results in addition to the basic functions.

Technical specifications Codespecifications No. Technical

810-208D HR-511

Model Advance test force (N) Total test force (N) Super Rockwell (scale N,T)

810-202D HR-521

810-203D HR-522

29.42; 98.07

810-204D HR-523

147,1; 294,2; 441,3

Total test force (N) Rockwell (N)

588,4; 980,7; 1471

Brinell (ball Ø / kg)

HBW 1/10; HBW 1/30; HBW 2.5/6.25; HBW 2.5/15.625; HBW 2.5/31.25; HBW 2.5/62.5; HBW 2.5/187.5; HBW 5/25; HBW5/62.5; HBW 5/125; HBW 10/100

HBW 2.5/187.5

Test force regulation

Automatic (load, duration, disengagement)

Vertical table elevation

Motor-driven (manual operation also possible)

Manual (advance test force with automatic brake)

Control panel Test force reversal Test force application time

Control unit

Max. size of workpiece

Touch screen Switch operated 0 - 120S (in increments of 1 s.)

Height: 250 mm (long version: 395 mm)* Depth: 150 mm (from the center of the intenter shaft)

Min. diameter of pipe-shaped or ring-shaped sample

Min. caliper: 35mm (if the optional indenter is used: 22 mm) Hardness value, test conditions, Hardness value, test conditions, OK/Not OK evaluation result, statistical evaluation, OK/Not OK evaluation result XR control chart, translation of a hardness value Rockwell hardness testing, Super Rockwell (scale N, T) hardness testing, Brinell hardness testing (optional measuring microscope and optional indenter required) Conversion function [HV, HK, HR (Rockwell hardness A, B, C, D, F, G / — Super Rockwell (scale N, T) 15T, 30T, 45T, 15N, 30N, 45N) tensile strength] OK/Not OK evaluation Continuous measuring function (for samples of the same thickness) Offset correction Cylindrical, spherical, offset, multi-point offset Statistical calculations (max./min., average, standard deviation, upper/lower limit, Code No. of OK/Not OK parts) Model HR-511 only via data output (no display available) — Preparation of graphs (XR control charts) 6 languages are supported: German, English, French, Italian, Spanish and Japanese (except HR-511). RS-232, Centronics, SPC (DIGIMATIC) AC 230 V approx. 250 (W) x 670 (D) x 605 (H) mm, approx. 60 kg Control panel (width x depth x height): approx. 165 (W) x 260 (D) x 105 (H) mm, approx. 0.75 kg

Display

Function

Language versions Output Power supply Main unit dimensions Weight

*Long versions for larger workpieces available on request.

Standard accessories Designation

Technical specifications

Rockwell Super Rockwell (scale N, T) Steel ball Indenter 1/16” Replacement steel ball 1/16” 10 balls Flat table Ø 64mm V-Anvil Ø 40mm 120° opening Diamond Indenter

Additional information for Brinell testing

Code No. 19BAA073 19BAA074 19BAA082 810-039 810-040

Designation Plastic dust protection cover Hardness test block Hardness test block Hardness test block Hardness test block Hardness test block Adjusting level

Code No.

Technical pecifications

30 - 35HRC 60 - 65HRC 90 - 95HRB 64 - 69HR30N 70 - 79HR30T

19BAA517 19BAA123 19BAA125 19BAA126 19BAA128 19BAA129 19BAA098

Designation Fuse Accessories storage box Instruction manual Warranty card

The relation between test force and indenter for Brinell testing is indicated below. The following Indenter (optional accessory) and a measuring microscope are needed to test Brinell hardness.

Brinell 19BAA277: 19BAA279: 19BAA280: 19BAA284:

Ø1 Indenter for Brinell hardness testing Ø2.5 Indenter for Brinell hardness testing Ø5 Indenter for Brinell hardness testing Ø10 Indenter for Brinell hardness testing

HBW1/10 HBW2.5/6.25

HBW1/30 HBW2.5/15.625

HBW2.5/31.25 HBW5/25

HBW2.5/62.5 HBW5/62.5

HBW2.5/187.5 HBW5/125 HBW10/100

11

Special Accessories

Special accessories for Rockwell hardness testing equipment 810-038

810-037

810-027

Round table (only for the HR series) Outer diameter Ø 250 mm For large specimen up to 85 kg (machine must be firmly fixed to the base)

Round table Outer diameter Ø180 mm For large specimen

Variable support arm

810-030 Point anvil, diamond (Outer diameter Ø10mm) For sheet specimen (Super Rockwell tests only: DT series, ATK-600, R series)

810-043 Point anvil (Outer diameter Ø12mm) For sheet specimen

810-040

810-044

V-Anvil (large) (Outer diameter Ø 40 mm, Opening 30 mm; 120°) For cylindrical specimen

Point anvil (Outer diameter Ø5.5 mm) For sheet specimen

810-041

264-504-5D

V-Anvil (small) (Outer diameter Ø40mm) Opening 6 mm; 90°) For cylindrical specimen

Digimatic Mini Processor DP-1VR

810-042 V-Anvil (small) (Outer diameter Ø10mm, Opening 8 mm; 120°) For cylindrical specimen

*The DP-1VR is supplied without a connecting cable (must be ordered separately).

(only for the HR series) Length 250 mm

810-029 V-Anvil Length 400 mm Opening 50 mm; 120°

810-026 Fine adjusting table for Jominy hardness testing (Jominy test) (Length 400mm slot width 50mm) For cylindrical samples (only for the HR series)

Signal line (1m) ARK-600, ATK-600 (937386) HR series (937387) 300

810-048 Console

Unit: mm

700

400 554

For digital hardness testing equipment only.

Special accessories: Hardness test blocks with DKD/MPA certificate Code No. 19BAA031D 19BAA034D 19BAA037D 19BAA038D 19BAA039D 19BAA040D 19BAA044D 19BAA046D 19BAA047D 19BAA048D 19BAA049D 19BAA054D 19BAA027D 19BAA166D 56AAE498D 56AAE501D 19BAA123D 19BAA124D 19BAA125D 19BAA126D 19BAA127D 19BAA128D 19BAA129D

Designation Hardness test block 60HRB Hardness test block 90HRB Hardness test block 30HRC Hardness test block 40HRC Hardness test block 50HRC Hardness test block 60HRC Hardness test block 63.6 HR30N Hardness test block 81, 2HR30N Hardness test block 76.2HR15N Hardness test block 84.7HR15N Hardness test block 89.9HR15N Hardness test block 77.3HR30T Hardness test block 200HBW 2.5 / 187.5 Hardness test block 200HBW 10 / 1000 Hardness test block 350HBW 2.5/187.5 Hardness test block 100HBW 5/125 Alu Hardness test block approx. 30HRC* Hardness test block approx. 40HRC* Hardness test block approx. 60HRC* Hardness test block approx. 90HRB* Hardness test block approx. 30HRB Alu* Hardness test block approx. 64HR30N* Hardness test block approx. 74HR30T*

* with factory certificate Further hardness test blocks available on request.

Special accessories: Penetrating objects Rockwell Indenters Diamond cone indenter

Code No. 19BAA072D*

For type all

Diamond cone indenter for small bores

19BAA292

1, 2, 3, 4

1/8“ steel ball indenter 1/16“ steel ball indenter 10 replacement 1/8“ steel balls 10 replacement 1/16“ steel balls

19BAA075 19BAA074 19BAA083 19BAA082

all all all all

Brinell Indenters 1 mm carbide indenter 5 replacement 1 mm carbide balls 2.5 mm carbide indenter 5 replacement 2.5 mm carbide balls 5 mm carbide indenter 1 replacement 5 mm carbide ball 10 mm carbide indenter 1 replacement 10 mm carbide ball

Code No. 19BAA277 19BAA281 19BAA279 19BAA283 19BAA280 19BAA162 19BAA284 19BAA163

For type 2, 3, 4, 5 2, 3, 4, 5 1, 2, 3, 4, 5, 6 1, 2, 3, 4, 5, 6 2, 3, 4, 6 2, 3, 4, 6 2, 3, 4 2, 3, 4

- Replacement balls can be supplied with DKD/ MPA certificate on request. * with DKD/MPA certificate 1 Wizhard HR-511 2 Wizhard HR-521 3 Wizhard HR-522 4 Wizhard HR-523 5 Durotwin DT-10 with Brinell retrofit package 6 Durotwin Plus DT-20 13

Vickers Hardness Testing Equipment

These models offer a wide selection - from low-cost manual to multi-purpose devices with automatic revolver for switching from objective to indenter.

810-160D: AVK-C0

Low-cost manual model

810-163D: HV-112 • Test force levels from HV0.2 - HV20 •motorized revolver • Equipped with statistical calculation function etc.

810-165D: HV-114 • Test force levels from HV1 - V50 • motorized revolver •Equipped with statistical calculation function etc.

810-981D: HV-113

810-985D: HV-115

• Test force levels from HV0.2 - HV20 • Equipped with TV camera and screen • motorized revolver • Equipped with statistical calculation function etc.

• Test force levels from HV1 - HV50 • Equipped with TV camera and screen • motorized revolver • Equipped with statistical calculation function etc.



Vickers Hardness Testing Equipment AVK-CO Equipment features The basic Vickers hardness testing machine - cost-efficient and simple! Analog microscope to measure the diagonals, the hardness value is read from the external Vickers table

Illumination

Camera connection

Analog measuring microscope Ocular 10x (standard) Manual Objective changer

10x Objective Test force setting

Standard accessories Hardness test block 700HV10 Diamond Indenter 19BAA060 (for Vickers) 19BAA098 Adjusting level 19BAA110 Plastic dust protection cover Flat table 810-039 Outer Ø 64 mm V-Anvil (large) Ø 40 mm, 810-040 opening 30 mm/120° V-Anvil (small) Ø 40 mm, 810-041 opening 6 mm/90° 810-064 10 x Objective Vickers table 19BAA016

Start button

Technical specifications Code No. 810-160D Model AVK-C0 Test force N 9,807 49,03 98,07 196,1 294,2 490,3 Loading process Automatic (load, duration, disengagement) Test force application time 5, 10, 15, 20, 30S switchable Speed of Reduced speed for final test force application test force application Objective 10 x Magnification 100 x Smallest digit increments 1 µm Max. size of workpiece Height 205 mm, Depth 165 mm (from the center of the indenter shaft) Power supply 230V, 60VA max. Dimensions (W x H x D) 200 x 705 x 600 mm Weight 50 kg

15

Vickers Hardness Testing Equipment Model HV-100 Equipment features

Camera connection

The motor-driven revolver enables switchovers between indenter and objective via control panel. For ergonomic and user-friendly operation, the control panel is detached from the actual test machine. The simple and intuitive operation of the touch screen allows the performance of all important functions. Use of 2 objectives for measurement. Fast and easy statistical analysis of measuring results Convenient display of imprints and other information on the TV screen (HV-113/HV-115)

Digital measuring microscope

Motor-driven objective changer

Illumination

Test force setting

Control panel LCD touch screen

810-163D: HV-112 810-165D: HV-114

Technical specifications Code No. Model Test force Observation and

N

measurement Loading process Application time

810-163D 810-981D HV-112 HV-113 1,961 / 2,942 / 4,903 / 9,807 /

810-165D 810-985D HV-114 HV-115 9,807 / 19,61 / 29,42 / 49,03 /

24,51 / 49,03 / 98,07 / 196,1

98,07 / 196,1 / 294,2 / 490,3

Ocular

Screen

Ocular

Automatic (load, duration, disengagement) 5 - 99 s

Speed of force application

20 / 50 / 100 / 150 µm/s

Max. size of workpiece Optical path Objective Resolution Max. measurement length Conversion of hardness

Max. height 210 mm (if using a flat anvil), max. depth 170 mm Beam split ocular/camera output 50/50 10 x , 20 x 0.1 µm 10 x : 700 µm, 20 x : 350 µm Soft: HV, HK, tensile strength, HRA, HRB, HRF, HRG, HR15T, HR30T, HR45T

values Objective changer Output Outer dimensions Weight Power supply

Screen

Hard: HV, HK, HS, HRB, tensile strength, HRA, HRC, HRD, HR15N, HR30N, HR45N Motor-driven RS-232C, Centronics, SPC (DIGIMATIC), external Main unit: approx. 245 (W) x 515 (D) x 770 (H) mm Display: approx. 165 (W) x 260 (D) x 105 (H) mm approx. 50 kg 230V 50/60Hz approx. 70VA max.

Digital measuring microscope

Camera

Motorized objective changer

Illumination

Test force setting

Screen Control panel LCD touch screen

810-981D: HV-113 810-985D: HV-115 Standard accessories 10x Objective 20x Objective Diamond Indenter Flat table Ø 64 mm V-Anvil Ø 40 mm 810-040 Opening 30 mm; 120° V-Anvil Ø 40 mm 810-041 Opening 30 mm; 90° Halogen lamp (6V/20W) 19BAA219 installed 19BAA016 Hardness test block (700HV10) 19BAA110 Dust protection cover 810-615 810-618 19BAA060 810-039

Control panel functions (touch screen) j Statistical functions k Tolerance evaluation l Measurement compensation when measuring cylindrical or spherical surfaces m Diagonals D1 and D2 readings n Hardness value readings o Test conditions, such as test force or application time p Conversion to other hardness scales q Automatic Objective changer control

17

Special Accessories

Special accessories for Vickers hardness testing equipment 810-038 Round table Outer diameter Ø 250 mm For large specimen

810-016 Vise (opening width 45mm) 264-504-5D Digimatic Mini Processor DP-1VR

810-037 Round table Outer diameter Ø180 mm For large specimen

810-012 XY table 50 x 50 mm Table dimensions 125 x 125 mm

810-017 Vise (opening width 100mm) Console 810-048

*Cable not included Signal cable (1m) HM series (937387)

300

19BAA219D Halogen lamp 6V20W

Code No. 19BAA060D

700

Designation Diamond Indenter Vickers (incl. DKD/MPA

400 554

19BAA0063

certificate) Diamond Indenter

19BAA0445

Knoop Camera adapter for CCD camera to camera output

Hardness test blocks with DKD/MPA certificate Code No. Designation 19BAA002D Hardness test block 240HV 0.3 19BAA003D Hardness test block 300HV 0.3 19BAA004D Hardness test block 400HV 0.3 19BAA005D Hardness test block 540HV 0.3 19BAA006D Hardness test block 620HV 0.3 19BAA007D Hardness test block 720HV 0.3 19BAA008D Hardness test block 840HV 0.3 19BAA011D Hardness test block 240HV10 19BAA012D Hardness test block Macro 300HV10 19BAA014D Hardness test block Macro 540HV10 19BAA015D Hardness test block 620HV10 19BAA016D Hardness test block 720HV10 Additional hardness test blocks available on request.

Objectives* Objective 5 x AVK-C

810-063

Objective 5 x HV

810-616

Objective 10 x AVK-C

810-064

Objective 10 x HV

810-617

Objective 20 x AVK-C

810-065

Objective 20 x HV

810-618

Objective 40 x AVK-C

810-066

Objective 50 x HV

810-619

* Installation by Mitutoyo

Mikrovickers Hardness Testing Equipment 810-124D: HM-101 • Manual model, hardness values read from an external table.

810-959D: HM-103 • Measurement on an external screen and display on a simple control panel.

810-125D: HM-102

• Digital model with simple control panel.

810-969D: HM-113 • Measurement on an external screen and display on a multi-purpose control panel.

810-126D: HM-112 810-128D: HM-114

810-126D: HM-211 810-128D: HM-221

• Digital model with multi-purpose control panel. HV 0.01 - HV 1 resp. HV 0.001 - HV 2

• With motorized revolver and option for connecting up to 4 objectives. • Measurements from HV 0.01 - HV 1 resp. HV 0.00005 - HV 2

19

Mikrovickers hardness testing equipment Model HM-100 Equipment features  Hardness testing machine in acc. with ISO 6507-1 and JIS B7725 Mikrovickers hardness testing machine with Vickers testing from HV 0.001 - HV2 (depending on the type of machine)  Option to connect up to 3 Objectives, that can all be used for indentation measurement (except HM-101)  Additional option to connect a Knoop Indenter Manual Objective changer

Camera connection

Measuring microscope (digital) Ocular 10x (standard) Illumination unit Objective change Switching between and selecting Indenter and Objective

Test force setting button Objectives 10 x , 50 x , 100 x

(Standard: varies, depending on the model. See column with technical specifications.)

Digital micrometer screws Rear view

Vise Standard vise (standard accessories) Max. opening width 45 mm

RS-232C plug

Connecting port for automatic table control SPC connection

XY table Table: 100 x 100 mm Traversing range: 25 x 25 mm Centronics connection

Start button Note: HM-101 has different technical specifications. The photo shows model HM-112.

Photo: Rear view of models HM-112, 114

Handle for table elevation Leveling screw For horizontal adjustment

Control panel for optimal user comfort Control panel with membrane keys (control unit)

Touch screen (touch-sensitive control panel)

HM-102 HM-103 Selector switch

Position value

Code No. of measurement points

Diagonal value

Diagonal value

Correction

Hardness value

OK/Not OK assessment

Hardness value

Print command

Duration of measuring force Scroll keys

Type of hardness

OK/Not OK assessment

Conversion value

Start switch

Zero position

Menu key

Start key

•The control panel with membrane keys is simple and intuitive to operate and only offers the basic functions needed for hardness testing, such as diagonal and hardness value display, OK/NG assessment setting, display of results and start button for applying test force.

Measuring force

Light setting

Duration of measuring force Selector switch

• The touch panel uses symbol keys and is therefore easy to understand and operate while offering a wide range of functions. Various additional functions are available alongside the basic hardness testing functions, such as conversion of measurement results into other hardness scales, setting mismatch values, operating the lighting system and displaying the position coordinates of the XY table.

Test force application locking function

High level of positioning accuracy

Large test force range

• A safety function prevents the application of test force if the lens changer is not in indenting position, thus preventing damage to the intenter if malfunctions occur.

• The repetition accuracy when switching between • The test force ranges between HV indenter and objective is very high, enabling 0.001 and HV 2 (HM-114), enabling you to identify and test the required position hardness testing in the widest range with a high level of accuracy. As such, targets of applications - from relatively soft in microranges can be measured easily and very films to hard materials. precisely.

*Imprint in a solid-state image 21

Technical specifications 810-124D

Code No. Model Test force

810-125D

HM-101

HM-102 98.07; 245.2; 490.3; 980.7 10; 25; 50; 100 1961; 2942; 4903; 9807 200; 300; 500; 1000

mN gf mN gf

Loading process Speed of force application

810-128D

HM-112

HM-114 9.807; 19.61; 29.42; 49.03; 98.07; 245.2; 490.3 1; 2; 3; 5; 10; 25; 50 980.7; 1961; 2942; 4903; 9807; 19610 100; 200; 300; 500; 1000; 2000



Automatic (load, duration, disengagement)

5 - 30 sec. (any setting)

Application time

810-126D

5 - 60 sec.

5 - 99 sec. approx. 60 µm/s

Max. size of workpiece

Optical path Objectives

Smallest digit increments Max. measurement length XY table Table top Traversing range Smallest calibration Micrometer screw Position input for fine adjustment table

1, 3, 10, 33 µm/s (245 mN or less), approx. 60 µm/s or more Height: 95 mm Depth: 150 mm Beam split ocular/camera output 50/50

10 x (observation) 50 x (measurement)

10 x , 50 x (measurement possible with both objectives)

10 x , 50 x , 100 x measurement possible with all objectives

0.2 µm

0.1 µm

0.01 µm (0.1 μm for 10 x and 50 x Objectivees)

140 µm

10 x : 700 µm, 50 x : 140 µm

10 µm

1 µm

—

Input via SPC interface to the hardness testing machine For each objective

—

Control panel functions

—

Data output

—

Touch screen operation D1 and D2 diagonal readings; hardness value readings; XY table position reading; test conditions, such as test force or application time; tolerance evaluation; measurement value compensation when measuring on cylindrical or spherical surfaces; translation to other hardness scales: LEDdisplay Soft: HV, HK, HBS, tensile strength, HRA, HRB, HRF, HRG, HR15T, HR30T, HR45T Hard: HV, HK, HS, HBS, tensile strength, HRA, HRC, HRD, HR15N, HR30N, HR45N Statistical functions: Code No. of values, max., min., average, range, upper limit, lower limit, standard deviation, Code No. of OK/Not OK evaluations, storage and editing of 256 values. SPC output DIGIMATIC RS-232C output Centronics output I/O for X-Y auto. measuring table Main unit (width x depth x height): approx. 410 x 600 x 590 mm (without control panel) approx. 42 kg 230 V approx. 60VA or less (approx. 20VA or less for HM-101, approx. 105 VA or less with camera system)

Standard accessories

System configuration Code No.

Model

810-124D 810-125D 810-959D 810-126D 810-969D 810-128D

HM-101 HM-102 HM-103 HM-112 HM-113 HM-114

10 x : 700 µm, 50 x : 140 µm, 100 x : 70 µm with digital micrometer

100 x 100 mm 25 x 25 mm

Objective calibration

Dimensions Weight Power supply Power consumption

140 µm

with analog micrometer

Main unit

See technical specifications for HM-102) (See technical specifications for HM-112) : Standard accessories

810-629 CCD camera TV screen —

810-617 810-619 810-620 19BAA058 19BAA059 810-074

810-011 19BAA133 : Special accessories 19BAA007 810-016 19BAA445 19BAA109 19BAA219

10x Objective for measurement (WD 5.6 mm) 50x Objective for measurement (WD 0.4 mm) 100x Objective for measurement (WD 0.3 mm) Diamond Indenter (HM-101, 102, 103, 112, -113 Diamond Indenter (HM-114) XY measuring table (digital) 100 x 100 mm,

measuring range 25 x 25 mm HM-112, 113, 114

XY measuring table (digital) 100 x 100 mm, Spacer/Cleaner (material: bakelite) Hardness test block 700HV0.3 Vise, opening: 51 mm Camera adapter for CCD camera Dust protection cover Halogen lamp, 6V, 20W (installed) Vickers hardness table for determining the hardness value (HM-101)

Mikrovickers Hardness Testing Equipment Model HM-200 Equipment feature  Hardness testing machine in acc. with ISO 6507-2 and JIS B 7725  Multi-purpose  Built-in LCD color display with touch screen operation  Standard motorized/manual Objective changer  This machine works without weights, only by applying electromagnetic test force  Objective changer can be fitted with up to 4 objectives and up to 2 indenters (Knoop/Vickers)  Objectives with very good working distance  Standard camera connection  Test forces from 0.05 - 2000 gf

3. Automatic revolver button (manual operation possible!)

1. Measuring microscope (digital) 2. Illumination unit

• For automatic switching between indenter and objectives • Objectives: Can hold up to 4 Standard: 10X, 50X (HM-211) 10X, 50X, 100X (HM-221) • Indenter mount: up to 2 standard indenter: Vickers Indenter (1)

7. Optical path (camera)

5. XY table (digital) Table surface: 100 x 100 mm Traversing range: 25 x 25 mm Standard equipped with digital micrometer screws!

6. Touch-sensitive control panel Don‘t just track the test process, but also check the hardness values in different scales or the test conditions.

8. Path selector 4. Vise Standard vise Max. opening: 51 mm

9. Rear view

23

 Objective with very good working distance

The use of these special objectives ensures a comfortable working distance between objective and test specimen,



thus dramatically reducing the risk of the components colliding during focusing.

 With integrated, adjustable aperture diaphragm

Use this function to set the best possible contrast for capturing indentation diagonals.

 Energy saving function

The integrated energy saving function automatically switches off the illumination and control panel



if the appliance is not operated for a specific period of time (between 1 and 60 minutes, can be set at minute increments).

Technical specifications Code No. Model

810-353D HM-221 mN 98.07 980.7 0.4903 0.9807 1.961 2.942 4.903 9.807 19.61 29.42, 49.03 98.07 gf 10 100 0.05 0.1 0.2 0.3 0.5 1 2 3 5 10 Test force mN 1961 196.1 294.2 490.3 980.7 1961 2942 4903 9807 19610 gf 200 20 30 50 100 200 300 500 1000 2000 At a test force of less than 0.9807 mN (0.1 gf) can only be set at 0.4903 mN (0.05 gf) Test forces of up to 980.7 mN (100 gf) Test forces from 0.9807 mN (0.1 gf) up to 9.807 mN (1 gf) Variable test force can be set in increments of 9.807 mN (1 gf) can be set in increments of 0.9807 mN (0.1 gf) (1 setting Test forces of 9.807 mN (1 gf) - 980.7 mN (100 gf) can be stored) Test forces of more than 980.7 mN (100 gf) can be set in increments of 9.807 mN (1 gf) can be set in increments of 98.07 mN (10 gf) Test forces of more than 980.7 mN (100 gf) can be set in increments of 98.07 mN (10 gf). Loading process Electromagnetic generation of test force with automatic control (application of force, application time and disengagement) Application time can be set from 0 - 999 seconds Max. size of 133 mm (height), 160 mm (depth - from the center of the penetrating object) workpiece Optics Infinitely corrected, halogen light source, variable diaphragm opening, path change for optics: microscope/camera 10X for measuring, 50X for measuring 10X for measuring, 50X for measuring, 100X for measuring Objective (up to 4 objectives can be mounted) (up to 4 objectives can be mounted) Max. measuring Objectives: 10X: 700 µm, 50X:140 µm 10X Objectives: 700µm, 50X: 140 µm, 100 X: 70µm length Mechanical, can also be operated manually Revolver rotation With digital micrometer, size 100x100 mm/ traversing range: 25x25 mm/ digit increments: 1 µm XY table Display on touch-sensitive color LCD Data display Diagonal length: max. 5-digits, min. 0.01µm (Objectivees with at least 50X magnification) functions Hardness values: max. 4-digit, min. 0.1 Force application, application time and disengagement, OK/Not OK evaluation (OK/±NG), translation, Indenter (HV/HK), XY table position Compensation Cylindrical and spherical shape, reading errors functions Hardness translation choice of SAE / ASTM / BSi860 / DIN / Mitutoyo Assistant for test conditions Statistics output Data output Dimensions (WxHxD) Weight Energy consumption

810-352D HM-211 196.1 294.2 490.3 20 30 50 2942 4903 9807 300 500 1000

Calculates test forces based on material thickness and expected Vickers hardness Code No. of measured values, Max. measured value, Min. measured value, average, range, upper tolerance, lower tolerance, Code No. of OK parts, Code No. of +Not OK and -Not OK Standard deviation (n-1), standard deviation(n) SPC DIGIMATIC, Centronics, RS232C Outer dimensions: approx. 400 x 625 x 600 mm, mounted: at least 600 x 780 x 1000 mm approx. 43 kg 230V AC, 50/60Hz, 90VA

Special Accessories

Standard accessories HM-200 Code No. Designation 19BAA407 Ocular measurement 810-617

Objective

19BAA439 Objective 19BAA440 Objective 19BAA058 Diamond Indenter 19BAA059 Diamond Indenter 11BAA578 Mounting shaft 02DEA204 Mounting shaft 810-074

XY measuring table (digital)

Description Digital version, Ocular 10X 10X, for measuring, W.D. 5.6 mm, standard for HM211/221 50X, W.D. 1.1 mm, standard for HM-211/221 100X, for measuring, W.D. 2.5mm, standard for HM-221 Vickers for HM-211 Vickers for HM-221 38 mm with two clamping screws 76 mm with two clamping screws 100 x 100 mm table, Measuring range: 25 x 25 mm

Units 1

Code No.

Designation Spacer/ 19BAA133 Cleaner

1

810-016 938905 11BAA961 19BAA522 02DEA471

1 1

Vise Optical filter Protective cap Camera adapter Dust protection cover

Material: bakelite

1

12V 50W (installed)

19BAA207 Halogen lamp 1

Units

700HMV0.3, Ø 25 mm x 6 mm Opening: 51 mm green for ocular

­19BAA007 Hardness test block

1

Description

11BAB908 Fuse

250V AC, 2A

1 1 1 1 1 1 2

1 1

Special accessories for enhancing and optimizing the HM-200 test system CCD camera

Automatic measurement (810-355-1)

Video camera 810-354D CCD camera

Video screen

Integrating these components simplifies evaluation

Frame grabber

Camera adapter

Integrating these components prevents test errors caused by the operator: automatic measurement of the indentation diagonal and calculation of the hardness value

PC

Software

Automatic positioning (810-356D)

Combination with components for automatic measurement! Increases throughput and simplifies multi-point testing thanks to automated positioning of the test specimen

Automatic XY table PC PC-AT drive

Automatic positioning

Engine control circuit board / Digital I/O

Auto-focus unit (810-357) PC-AT drive AF table Tube lens (sample focus)

HM-211: 810-352D HM-221: 810-353D

Code No. 810-352D 810-355-1

810-356D 810-357

Integrating the auto-focus components together with automatic positioning and measurement produces a quick and fully automated hardness testing system

PC Joystick

Joystick circuit board

Designation CCD video camera with external screen CCD video camera for connection to a computer

Description Simplified measurement of indentation diagonals on an external screen Simplified measurement of indentation diagonals on a PC screen using

and evaluation software VL-Pak

VL-Pak software support. This software supports automatic measurement of

Automatic XY table Auto-focus unit to enhance the XY table

the hardness indentation, for example. Automatic movement to preset positions using VL-Pak software Automatic focus on the workpiece surface for fully automatic measurement

25

Special Accessories

Special accessories for Mikrovickers hardness testing equipment 810-013

810-020

Thin sheet holder

Universal sample holder

Prevents measurement distortions due to bending when testing the hardness of sheets with a thickness of 5 mm and less.

(sample thickness max. 30 mm) For precise alignment of the test surface and indenter axis if the test specimen is not exactly parallel. Cannot be used with automated hardness testing machines.

(e.g.: scalpel blades etc.)

810-015

810-018

Wire holder

Rotating table (smallest increment 1°)

(vertical version)

Specimen can be rotated into different positions for measuring on this test table.

For wire or balls with a Ø of between 0.4 mm and 3 mm for end measurements (e.g.: wire, piano strings etc.)

810-014

810-017

Wire holder

Vise

(horizontal version) For thin wires with a Ø of between 0.4 and 3 mm for side measurements. (e.g.: wire, piano strings etc.)

For samples up to 100 mm.

810-019

810-012

Special slewing vise

XY table

For aligning the test surface, with an opening width of 37 mm, a slewing angle of ±150º and a rotating angle of ± 25º.

(50 mm X/Y elevation)

810-085 Sample holder for thin sheets etc. Measuring window: 25 x 10 mm Max. thickness of workpiece: 3 mm

For positioning the specimen by up to 50 mm in X and Y direction.

Measuring window

810-084 Rotating universal sample holder (sample thickness max. 30 mm) For precise alignment of the test surface and Indenter axis if the test specimen is not exactly parallel. Cannot be used with automated hardness testing machines.

Special accessories for Mikrovickers hardness testing equipment Indenter Code No. 19BAA058D 19BAA059HD 19BAA061 19BAA062

Designation Vickers Indenter incl. DKD/MPA certificate for HM-101, 102, 103, 112, 113, 211 Vickers Indenter incl. DKD/MPA certificate for HM-114, 221 Knoop Indenter for HM-101, 102, 103 -112, -113, -211 Knoop Indenter for HM-114, 221

Code No. 264-504-5D Digimatic Mini Processor DP-1VR For printing hardness values, statistics *The signal line for the DP-1VR is not included and must be ordered separately (see below) Signal line (1m) Code No. 937387 for Model HM (except HM-101)

Hardness test blocks incl. DKD/MPA certificate

Code No. 19BAA002D 19BAA003D 19BAA004D 19BAA005D 19BAA006D 19BAA007D 19BAA008D 19BAA011D 19BAA012D 19BAA014D 19BAA015D 19BAA016D

Designation Hardness test block 240HV 0.3 Hardness test block 300HV 0.3 Hardness test block 400HV 0.3 Hardness test block 540HV 0.3 Hardness test block 620HV 0.3 Hardness test block 720HV 0.3 Hardness test block 840HV 0.3 Hardness test block 240HV10 Hardness test block 300HV10 Hardness test block 540HV10 Hardness test block 620HV10 Hardness test block 720HV10

Objectives for Vickers and Microvickers Special accessories (installation by Mitutoyo) / possibly standard accessories (already installed) Code No. 810-063 810-064 810-065 810-066 810-616 810-617 810-618 810-619 810-620 19BAA439 19BAA440 19BAA158-2 02DEA052 11AAB412 11AAB413 11AAB414 11AAB250

Designation

Magnification

Objective Objective Objective Objective Objective Objective Objective Objective Objective Objective Objective Objective holder Objective holder Objective set, holder and Objective Objective set, holder and Objective Objective set, holder and Objective 13 corrector plates, 0.8 - 2 mm

5x 10x 20x 40x 5x 10x 20x 50x 100x 50x 100x 5x 20x 100x

Working distance

13.5 mm 5.6 mm 1.8 mm 0.4 mm 0.3 mm 1.1 mm 2.5 mm

Remarks AVK-C AVK-C AVK-C AVK-C HM-100/HM-200/HV-100 HM-100/HM-200/HV-100 HM-100/HM-200/HV-100 HM-100 HM-100 HM-200 HM-200 HM-100/HV-100 HM-200 HM-200 HM-200 HM-200 HM-100/HM-200/HV-100 27

VLPAK Measuring Program for Automatic Indentation Measurement

Reduces operator influence on the hardness measurement. Detection time just 0.3 seconds, i.e. dramatic increase in measuring performance and throughput.

Automatic detection in just 0.3 seconds. (when using a PC with the recommended performance specifications) This very fast automatic measuring software detects the indentation in 0.3 seconds, displays the hardness and thus considerably shortens the required measuring time.

During hardness measurement, the indentation diagonal is measured on the TV screen; critical factors include the measurement deviations caused by the operator and the worktime savings. The VLPAK automatic length measuring program automatically measures the indentation diagonal and converts the result into a hardness value; thus reducing measuring errors caused by operator measuring deviations. It also determines the hardness in a flash, in just 0.3 seconds, thus dramatically increasing performance and throughput during hardness testing. You can easily combine it with your hardness testing machine (*HM-112, 114 etc.) without any problems and take advantage of its additional functions. The software is user friendly and allows you to perform settings and data processing on a Windows PC, where it demonstrates its superb efficiency and ability to perform.

Equipped with automatic measuring function for Vickers and Knoop hardness testing Fully automatic measurement of Vickers and Knoop hardness is possible. The software also has a template function that you can use to measure indentations manually right on the PC screen. Screen for automatic measurement Screen for manual measurement

Measurements are easily performed using the mouse Operators can perform all operations - from setting to measurement - on a PC (Windows operating system). MS-Excel can be used for various measurement result processing tasks.

Brinell Hardness Testing Equipment ABK-1 Suitable for testing workpieces with up to 3000 kgf. Hydraulic Brinell hardness testing machine ABK-1 ABK-1 is a hardness testing machine that is easy to operate and extremely accurate. It is used for testing raw materials, cast/forged parts and special steel. A large indentation can create a smooth surface even when measuring rough surfaces. The handle for vertical table operates on a special bearing to ensure even and soft upward and downward movements. By distributing weights appropriately test forces between 4903N (500kgf) and 29420N (3000kgf) may be generated. Two different size carbide indenters (10 mm and 5 mm) can be used, depending on the sample.

Technical specifications Code No. Model Test force

Standard accessories

810-265-1 ABK-1 N 4903 7355 9807 14710 19614 24517 29420 kgf 500 750 1000 1500 2000 2500 3000

Test force conversion Test load regulation Test force application time Max. size of workpiece

Manual (selection by replacement)

Outer dimensions

approx. 430 (W) x 510 (D) x 1100 (H) mm

Weight

approx. 180 kg

Manual (load, duration, disengagement) Manual (any setting) Max. height Max. depth

0 - 200 mm 155 mm

Designation

Technical specifications

Weight Weight Weight

For 4903N (500kgf) For 2452N (250kgf) For 9807N (1000kgf) 5mm (carbide ball) 10 mm (carbide ball) 20 x Plastic

Indenter Indenter Measuring microscope Dust protection cover Hardness calculation table Accessories storage box

Operators‘ manual

Quantity 1 2 sets 2 sets 1 1 1 1 1 1 1

29

Mobile Rebound Hardness Testing Device HARDMATIC HH-411 Equipment features  The HH-411 hardness tester uses the rebound method and is used to test metals;

it is particularly compact and easy and intuitive to operate. Hardness is measured in Leeb values.

810-298: HH-411

Wide range of detectors

Equipped with data storage function

In addition to the standard universal hydraulic impactor (type D), users can choose from a wide range of special hydraulic impactors for special measuring tasks. Type DC: For cramped spaces, e.g. measuring in pipes Type D+15: Narrow design for measuring in slots Type DL: For measurements in the tightest ranges, such as welded seams or gear wheels

Up to 1800 measuring results can be stored - the ideal device for on-site control measurements.

With automatic alignment correction When using rebound hardness testers, gravity influences the measurement result - depending on the orientation of the hydraulic impactor relative to the vertical when pressing against the sample surface.

Free choice of hardness scale, depending on your individual measurement application The HL hardness value (L value: acc. to ASTM A 956) can be converted into Vickers, Brinell, Rockwell C, Rockwell B and Shore hardness values and tensile strength. The conversion can be performed following the test resp. even during the test in conversion mode.

Extremely simple to operate The hydraulic impactor is simply pressed against the sample surface and the button triggered (biro principle) - hardness testing does not get any easier than this.

Technical specifications Code No.

810-298

Model

HH-411 Carbide ball on the tip of the impactor Hydraulic impactor (Type D: ASTM A 956 specification) Display 7 segments, LED display Leeb hardness: 1 - 999HL Digit increments 1HL Vickers hardness: 43 - 950HV Digit increments 1HV Brinell hardness: 20 - 894HB Digit increments 1HB Rockwell hardness (C scale): 19.3 Display range Digit increments 0.1HRC (varies, depending on the conversion 68.2HRC Rockwell hardness (B scale): 13.5 table used) Digit increments 0.1HRB 101.7HRB Shore hardness: 13.2 - 99.3HRS Digit increments 0.1HS Tensile strength: 499 - 1996 MPa Digit increments 1MPa Automatic angle correction, mismatch; OK/Not OK evaluation Data storage: 1800 test values; Conversion (see “display range” for details) Function Statistical calculations (average, min./max., scatter range, standard deviation) Auto-sleep; Display of Code No. of measurements Sample requirements Output Power supply

Operating environment Outer diameters and weight

Min. sample thickness 5 mm, min. weight 5 kg (Samples weighing between 0.1 and 5 kg are securely fixed to a massive block weighing at least 5 kg for measuring purposes.) Test position: min. 5 mm from the edge of the sample, min. space between test points 3 mm Sample surface quality: within Ra 10 µm RS-232C, SPC (DIGIMATIC) Two LR 6 batteries, AC adapter (special accessory) Temperature: 0 - 40°C Air humidity: 95% (without condensation) Display: approx. 70 (W) x 110 (D) x 35 (H) mm, approx. 200g Hydraulic impactor: approx. Ø 28 x 175 mm,approx. 120g

Note: The rebound testing device cannot be used for measuring the hardness of elastic materials - such as rubber. The rigidity of the sample affects the measuring result. Thin sheets, in particular, may not be tested using this device.

Standard accessories Code No. 19BAA450-01 — — — 810-287 — 19BAA457 19BAA459 19BAA460 19BAA451 19BAA452 — 19BAA265 —

Designation UD-410 display LR 6 battery Operators‘ manual Belt UD-41 hydraulic impactor1 Impactor Carbide ball Wrench Hydraulic impactor cable Stop cap Stop cap (small) Test machine storage and transport container Hardness comparison block Hardness comparison block storage and transport container

Technical specifications Quantity — 1 — 2 — 1 — 1 Type D approx. Ø 28 x 175mm, approx. 120 g (stop cap Ø 22 mm) 1 — 1 in the impactor 1 For replacing the carbide ball 1 — 1 Ø 22 mm 1 Ø 14 mm 1 Display and hydraulic impactor storage and transport container

1

corresponds to 800HLD

1

—

1

31

Special Accessories

Special Accessories Code No. One display (UD-410) can be used in combination with various detectors.

810-290: UD-414 Application: Suitable for measuring slots and gaps as found on gear wheels and welded corners.

810-289: UD-413 Application: Suitable for measuring in narrow slots.

Digimatic Mini Processor 264-504-5D DP1-VR 937387 Signal line 09EAA069D Printing roll 19BAA238

Signal line

526688D 19BAA243 19BAA244 19BAA245 19BAA246 19BAA247

AC adapter Hardness test block Hardness test block Hardness test block Hardness test block Hardness test block

19BAA248 19BAA249

810-288: UD-414 Application: Suitable for measuring the inside walls of cylinders. The hydraulic impactor is short and therefore guarantees the requisite stability at the measuring position.

19BAA250 19BAA251 19BAA457 19BAA458 810-287 810-288 810-289 810-290

Technical specifications For printing measurement data, various statistics, etc. For connecting DP-1VR and display (1 m) For DP-1VR (1 roll) For connecting PC and display RS-232C (for DOS/V PC)

880HLD (Ø 115 mm, t33 mm, 3.7 kg) 830HLD (Ø 115 mm, t33 mm, 3.7 kg) 730HLD (Ø 115 mm, t33 mm, 3.7 kg) 620HLD (Ø 115 mm, t33 mm, 3.7 kg) 520HLD (Ø 115 mm, t33 mm, 3.7 kg) For measuring convex cylindrical Stop capcylinder (3) surfaces (R10 to 20 mm): for types D and DC For measuring concave cylindrical Stop caphollow cylinder (4) surfaces (R14 to 20 mm): for types D and DC Stop cap For measuring convex spherical surfaces ball (5) (R10 to 27.5 mm): for types D and DC For measuring concave spherical Stop cap hollow ball (6) surfaces (R13.5 to 20 mm): for types D and DC Carbide ball For types D, DC and D+15 Impactor For type DL Type D approx. Ø 28 x 175 mm, approx. UD-411 detector 120 g (stop cap Ø 22 mm) Type DC approx. Ø 22 x 85 mm, approx. UD-412 detector 50 g (stop cap Ø 22 mm) Type D+15 approx. Ø 28 x 190 mm, UD-413 detector approx. 130 g (stop cap Ø 11 mm) Type DL approx. Ø 28 x 230 mm, UD-414 detector approx. 140 g (stop cap Ø 4 mm)

Application Examples

810-289

810-290

810-288

Quantity

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

Hardness Testing Equipment for Foam, Rubber and Plastic Hardmatic Model HH-300

Compact design

HH-333, 334 HH-337, 338

HAR D

Hardmatic HH-300 models are slimline and easy to operate, and compactly designed for easy handling. Both types are available with analog or digital display.

Plastic

Hard rubber

Long version

HH-331, 332

General types of rubber

HH-335, 336

SOF T

Elastomers

Hard foam Soft foam

Overview

Code No. Model Process

811-332 HH-332 Shore A

811-334 HH-334 Shore D

811-336-01 811-338-01 HH-336 HH-338 Shore A Shore D

811-331 HH-331 Shore A

811-333 HH-333 Shore D

811-335-01 811-337-01 HH-335 HH-337 Shore A Shore D 33

Hardmatic Model HH-300 Long version

Equipment features  The head on the long version has a narrow cylindrical shape (Ø24 x 85mm). This enables it to measure hardness both in slots or bore holes and on open surfaces. In addition, the operator can perform measurements without bringing his hands close to the sample surface. This is helpful when surface temperatures are high: for example immediately after the molding process.

To perform a measurement, simply press the hardness testing device against the sample and read the displayed value.

Technical specifications Code No. Model Type

811-331 HH-331

811-332 HH-332

Display

Analog

Digital

811-334 HH-334

Analog

Digital

Long version

Type of sample Shore hardness

Rubber/soft plastic

Hard rubber, hard plastic Type D

Type A

Prevailing standard

Needle shape

811-333 HH-333

JIS K 6253, JIS K 7215, ASTM D 2240, ISO 868, ISO 7619

Shaft diameter Shape of needle tip Tip angle Tip diameter Tip curvature

Pressure surface Protrusion of test needle over pressure surface Scale divisions Test force application Functions Outer dimensions Weight Power supply Standard accessories

Ø 1.25 ± 0.15 mm Truncated cone 35° ± 0,25° Ø 0.79 ± 0.01mm —

Cone 35° ± 1° — Ø 0 ± 0.01mm Ø18mm 2.5mm

1 hardness unit (HH-329, 331, 333, 335, 337) 0.5 hardness unit (HH-330, 332, 334, 336, 338) Coil spring “Hold” function, DIGIMATIC “Hold” function, DIGIMATIC Analog pointer Analog pointer data output data output Analog approx. 56 (W) x 33.5 (D) x 186 (H) mm Digital approx. 60 (W) x 28.5 (D) x 193 (H) mm 320 g 310 g 320 g 310 g —

Silver oxide cell battery SR 44

—

Silver oxide cell battery SR 44

•Hardness testing device, main unit • Instruction manual • Silver oxide cell battery SR44 (HH-332, 334) • Storage and transport container • Warranty card

Compact version Hardmatic Model HH-300 Equipment features  The compact design fits easily into your hand, thus permitting very comfortable measurements.

Technical specifications Code No. Model Type Display Type of sample Shore hardness Applicable standards Needle shape Shaft diameter Shape of needle tip Tip angle Tip diameter Tip curvature Pressure surface Ø Protrusion of test needle over pressure surface Scale divisions Test force application Functions Outer dimensions Weight Power supply Standard accessories

811-335-1 HH-335 Analog

811-336-1 HH-336 Digital

811-337-1 HH-337 Compact version Analog

811-338-1 HH-338

Digital Hard rubber/hard plastic Type A Type D JIS K 6253, JIS K 7215, ASTM D 2240, ISO 868, ISO 7619 Ø 1.25 ± 0.15 mm Truncated cone Cone 35° ± 0,25° 30° ± 0,25° Ø 0.79 ± 0.01mm — — 0.1 ± 0.01 mm Ø 18 mm Rubber/soft plastic

2.5 mm 1 hardness unit (HH-331, 333, 335, 337) 0.5 hardness unit (HH-332, 334, 336, 338) Coil spring Coil spring “Hold” function “Hold” function Analog pointer Analog pointer DIGIMATIC data output DIGIMATIC data output approx. 56 (B) x 33.5 (T) x 144 (H) mm approx. 60 (W) x 28.5 (D) x 151 (H) mm 300 g 290 g 300 g 290 g — Silver oxide cell battery SR 44 — Silver oxide cell battery SR 44 •Hardness testing device, main unit • Instruction manual • Silver oxide cell battery SR44 (HH-336, 338) • Storage and transport container • Warranty card

35

Digital devices - Hold function

Analog devices - Analogue pointer

prior to measurement Analogue pointer Pointer during measurement

After pressing the hold button Holds the display value at all times during measuring so that you always have the measurement results available at a glance.

The slave pointer in the analog display is ideal for measuring peak values.

Special accessories Digimatic Mini Processor DP-1VR (special model) HH-332, 334, 336, 338 The HH-300 series can also print out hardness measurement results and statistics - such as min./max. values, standard deviations and averages - via the Digimatic interface. A special DP-1VR model and the process-oriented RS-232C interface can transfer measuring results to your PC.

19BAA406 DP-1VR (special model)

Mounting shaft

HH-329, 335, 336, 337, 338 The optional mounting shaft can be used to tension a test machine in a conventional box column drill and thus keep the measuring position stable. If you additionally fit the shaft with electronic scales, the measuring results will be as stable as if you had used the measurement stand from the CTS series.

19BAA180

Test sample set

Code No. 64AAA964 Made of rubber Hardness 30, 60, 90 Shore “A”

One unit - 3 applications

Measurement / Test stand for various applications For measuring hardness For testing the spring force of the main unit. More stable results with fewer deviations can be achieved when measuring hardness by attaching the supplied weight directly to the hardness testing device than when applying force manually. All 4 models can be used for the listed applications by purchasing the corresponding optional accessory Technical specifications Code No. Suitable models Application Hardness measurement Test force Weight Application Manual measurement at firm pressure Test force Weight Application Testing spring force Weight Weights Weight attachment

811-019 HH-331, 332

811-012 HH-333, 334

811-013 HH-335, 336

811-014 HH-337, 338

9.81 N j

49.05 N j+l+m

9.81 N j

49.05 N j+l+m

9.81 N j+o

49.05 N j+l+o

9.81 N j+o

49.05 N j+l+o

L: — / H: j L: j+n / H: l L: — / H: j+k L: j+n / H: l jCTS-101, 102, 103, 104 Measuring / Testing k103 MeasuringlCTS-102, 104 Measuring / Testing m102, 104 MeasuringnCTS-102, 104 Measuring / Testing o101, 102, 103, 104 Measuring jØ64x23,5 lØ78x110 m jØ64x23,5 lØ78x110 jØ64x23,5 kØ20x19 Ø20x25 nØ40x25 jØ 64x23,5 oØ40x13 mØ20x25nØ40x25oØ40x13 oØ40x13 oØ40x13 j580 g k34.8 g l3950 g m50 g n187,4 g o130 g

Outer diameter (unit: mm) Weight, main unit Stand Outer dimensions Vertical elevation Max. sample thickness Sample table dimensions Weight, total

approx. 9 kg

Ø 148 x height (max.) 420 mm 12 mm approx. 90 mm Ø 90 mm approx. 13 kg approx. 9 kg

approx. 13 kg

Standard accessories for measurement and test stands

Weight n

Technical Quantity 811-019 811-012 811-013 specifications — 1 — 1 Measuring / 1 Testing Testing 1 — — Measuring / 1 — — Testing Measuring / 1 — — Testing Testing 1 —

Weight o

Testing

Designation Main unit Tool kit Weight j Weight k Weight l Weight m

2

Operators‘ manual —

1

Warranty card —

1

811-014

—

1) Hardness measurement

2) Testing spring force

3) Manual measurement

37

Conversion table for hardness values

This table is for reference purposes to allow the approximate translation of hardness values determined on one and the same metal sample using different hardness testing methods into other hardness values. In view of the strongly differing test methods, the values determined using the method indicated in the product specification should be used - and not values translated from other test methods - for quality assurance purposes.

Conversion of hardness values for non-alloyed and low-alloy steel and cast steel acc. to DIN EN ISO 18265 table A.1

76,0 80,7 85,5 90,2 95,0 99,8

HRB — 41,0 48,0 52,0 56,2 —

HRF — — 82,6 — 87,0 —

HRC — — — — — —

Rockwell hardness HRA HRD — — — — — — — — — — — —

HR15N — — — — — —

HR30N — — — — — —

HR45N — — — — — —

105 109 114 119 124 128 133 138 143 147 152 156 162 166 171 176 181 185 190 195 199 204 209 214 219 223 228 233 238 242 247 252 257 261 266 271 276 280 285 295 304 314 323 333

62,3 — 66,7 — 71,2 — 75,0 — 78,7 — 81,7 — 85,0 — 87,1 — 89,5 — 91,5 92,5 93,5 94,0 95,0 96,0 96,7 — 98,1 — 99,5 — (101) — (102) — (104) — (105) — — — — — — —

90,5 — 93,6 — 96,4 — 99,0 — (101,4) — (103,6) — (105,5) — (107,2) — (108,7) — (110,1) — (111,3) — (112,4) — (113,4) — (114,3) — (115,1) — — — — — — — — — — — — — — —

— — — — — — — — — — — — — — — — — — — — — — — — — — 20,3 21,3 22,2 23,1 24,0 24,8 25,6 26,4 27,1 27,8 28,5 29,2 29,8 31,0 32,2 33,3 34,4 35,5

— — — — — — — — — — — — — — — — — — — — — — — — — — 60,7 61,2 61,6 62,0 62,4 62,7 63,1 63,5 63,8 64,2 64,5 64,8 65,2 65,8 66,4 67,0 67,6 68,1

— — — — — — — — — — — — — — — — — — — — — — — — — — (69,6) 70,1 70,6 71,1 71,6 72,1 72,6 73,0 73,4 73,8 74,2 74,6 74,9 75,6 76,2 76,8 77,4 78,0

— — — — — — — — — — — — — — — — — — — — — — — — — — (41,7) 42,5 43,4 44,2 45,0 45,7 46,4 47,2 47,8 48,4 49,0 49,7 50,2 51,3 52,3 53,6 54,4 55,4

— — — — — — — — — — — — — — — — — — — — — — — — — — (19,9) 21,1 22,2 23,2 24,3 25,2 26,2 27,1 27,9 28,7 29,5 30,4 31,1 32,5 33,9 35,2 36,5 37,8

Tensile strength

Vickers

Brinell hardness

MPa 255 270 285 305 320 335

hardness HV10

HB*

80 85 90 95 100 105

350 370 385 400 415 430 450 465 480 495 510 530 545 560 575 595 610 625 640 660 675 690 705 720 740 755 770 785 800 820 835 850 865 880 900 915 930 950 965 995 1030 1060 1095 1125

110 115 120 125 130 135 140 145 150 155 160 165 170 175 180 185 190 195 200 205 210 215 220 225 230 235 240 245 250 255 260 265 270 275 280 285 290 295 300 310 320 330 340 350

— — — — — — — — — — — — — — — — — — — — — — — — — — 40,3 41,1 41,7 42,2 43,1 43,7 44,3 44,9 45,3 46,0 46,5 47,1 47,5 48,4 49,4 50,2 51,1 51,9

Translation ISO 18265 - 50.5 HRC - A.1 - HV Standard Code No. hardness value from translation (table value) table used for translation method used to experimentally determine hardness

Example of a translation: In the case of a result produced by means of translation, this notation must indicate which method was used to directly determine hardness.

Table left (continued) Tensile strength

Vickers

Brinell hardness

MPa 1155 1190 1220 1255 1290 1320 1350 1385 1420 1455 1485 1520 1555 1595 1630 1665 1700 1740 1775 1810 1845 1880 1920 1955 1995 2030 2070 2105 2145 2180 — — — — — — — — — — — — — — — — —

hardness HV10

HB*

360 370 380 390 400 410 420 430 440 450 460 470 480 490 500 510 520 530 540 550 560 570 580 590 600 610 620 630 640 650 660 670 680 690 700 720 740 760 780 800 820 840 860 880 900 920 940

342 352 361 371 380 390 399 409 418 428 437 447 456 466 475 485 494 504 513 523 532 542 551 561 570 580 589 599 608 618 — — — — — — — — — — — — — — — — —

HRB — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —

HRF — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —

HRC 36,6 37,7 38,8 39,8 40,8 41,8 42,7 43,6 44,5 45,3 46,1 46,9 47,7 48,4 49,1 49,8 50,5 51,1 51,7 52,3 53,0 53,6 54,1 54,7 55,2 55,7 56,3 56,8 57,3 57,8 58,3 58,8 59,2 59,7 60,1 61,0 61,8 62,5 63,3 64,0 64,7 65,3 65,9 66,4 67,0 67,5 68,0

Rockwell hardness HRA HRD 68,7 52,8 69,2 53,6 69,8 54,4 70,3 55,3 70,8 56,0 71,4 56,8 71,8 57,5 72,3 58,2 72,8 58,8 73,3 59,4 73,6 60,1 74,1 60,7 74,5 61,3 74,9 61,6 75,3 62,2 75,7 62,9 76,1 63,5 76,4 63,9 76,7 64,4 77,0 64,8 77,4 65,4 77,8 65,8 78,0 66,2 78,4 66,7 78,6 67,0 78,9 67,5 79,2 67,9 79,5 68,3 79,8 68,7 80,0 69,0 80,3 69,4 80,6 69,8 80,8 70,1 81,1 70,5 81,3 70,8 81,8 71,5 82,2 72,1 82,6 72,6 83,0 73,3 83,4 73,8 83,8 74,3 84,1 74,8 84,4 75,3 84,7 75,7 85,0 76,1 85,3 76,5 85,6 76,9

HR15N 78,6 79,2 79,8 80,3 80,8 81,4 81,8 82,3 82,8 83,2 83,6 83,9 84,3 84,7 85,0 85,4 85,7 86,0 86,3 86,6 86,9 87,2 87,5 87,8 88,0 88,2 88,5 88,8 89,0 89,2 89,5 89,7 89,8 90,1 90,3 90,7 91,0 91,2 91,5 91,8 92,1 92,3 92,5 92,7 92,9 93,0 93,2

HR30N 56,4 57,4 58,4 59,3 60,2 61,1 61,9 62,7 63,5 64,3 64,9 65,7 66,4 67,1 67,7 68,3 69,0 69,5 70,0 70,5 71,2 71,7 72,1 72,7 73,2 73,7 74,2 74,6 75,1 75,5 75,9 76,4 76,8 77,2 77,6 78,4 79,1 79,7 80,4 81,1 81,7 82,2 82,7 83,1 83,6 84,0 84,4

HR45N 39,1 40,4 41,7 42,9 44,1 45,3 46,4 47,4 48,4 49,4 50,4 51,3 52,2 53,1 53,9 54,7 55,6 56,2 57,0 57,8 58,6 59,3 59,9 60,5 61,2 61,7 62,4 63,0 63,5 64,1 64,7 65,3 65,7 66,2 66,7 67,7 68,6 69,4 70,2 71,0 71,8 72,2 73,1 73,6 74,2 74,8 75,4

* The Brinell hardness values to 450 HB were determined using the steel ball as Indenter, and above this level using the carbide ball. NOTE: The figures in brackets indicate hardness values that are outside the definition range of the standardized hardness testing method, but which are practically used as approximate values in many cases.

39

Additional information Minimum thickness of the sample t: mm 0.001 0.002 0.003 0.005

Vickers hardness value Hv

d

h

2000

t

F HV = 0.1891 2 d t >1.5d h = d 7 t: Minimum thickness of the sample mm d: Diagonal length mm h: Penetration depth mm

Diagonal lengths d: mm

0.01

1000

0.02 0.03 0.05

500 300 200

0.1

100

0.2 0.3 0.5

50 30 20 [Example]

Test force F: N 4.903 X 10-3

Hardness symbol HV0.0005

9.807 X 10-3

0.001 0.002 0.003 0.005

0.001 0.002 0.003 0.005 0.01 0.02 0.03 0.05 0.1

0.01

19.61 X 10-3 29.42 X 10-3 49.03 X 10-3 98.07 X 10-3

0.02 0.03 0.05

0.1961 0.2942 0.4903

0.1

0.9807 1.961 2.942 4.903

0.2 0.3 0.5

0.2 0.3 0.5

Bildverarbeitungsmessgeräte

9.807 19.61 29.42 49.03 98.07 196.1 294.2 490.3

1 2 3 5

1 1 2 2 3 t: Minimum thickness of the sample: 0.15 mm HV: Hardness value of the sample: 185HV1 d: Diagonal length: 0.11 mm f: Test force: 9.807 N

Koordinatenmessgeräte

10 20 30 50

Formmessgeräte Optische Messgeräte Sensorsysteme Härteprüfgeräte und Seismografen

t (mm)

10 20

30

40 50 60 70

HRD HRC

80 90 100

t (mm)

3.3 3.15 3 2.85 2.7 2.55 2.4 2.25 2.1 1.95 1.8 1.65 1.5 1.35 1.2 1.05 0.9 0.75

Minimum thickness of the sample

1.8 1.7 1.6 1.5 1.4 1.3 1.2 1.1 1.0 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1

Linear Scale Minimum thickness of the sample

Minimum thickness of the sample

Rockwell Super Rockwell (scale N, T) hardness

t (mm)

1.2 1.0

HRT

0.8 0.6 HRN

0.4 0.2 0

10 20

30

40 50

60 70

80 90 100

15N 30N 20 30

40 50

60 70

HRA

Rockwell hardness

Handmessgeräte und Datenübertragungssysteme

1.4

HRK HRG HRB

80

90 100 HRH HRE HRF

15T

45N 30T 45T

Super Rockwell hardness (scales N, T)

Rockwell hardness

Note: All information about our products in this printed material, particularly the illustrations, drawings, measurement and performance specifications, as well as other technical specifications are to be interpreted as approximate average values. In this respect, changes in construction, technical specification, measures and weights remain reserved. Our specified standards, similar technical regulations as well as the technical specifications, descriptions and illustrations of products are accurate on the date of printing. Furthermore, our general terms of business in the currently applicable revision are binding. Only the offers we make are definitive.

Mitutoyo Europe GmbH Borsigstr. 8-10 41469 Neuss T +49 (0)2137-102-0 F +49 (0)2137- 86 85 [email protected] www.mitutoyo.de

© MITUTOYO / D 1207 PRE 1306

Vickers