GRUNDFOS HS Pumps
GRUNDFOS HORIZONTAL SPLITCASE PUMPS The Reliable & Efficient Workhorse
PUMP DESCRIPTION
Introduction The Grundfos HS horizontal splitcase pump is an unstop-
• The pumps are non-self-priming, centrifugal volute
• Grundfos HS pumps are available in three different
pable workhorse. The HS delivers high efficiency perform-
pumps with radial suction and radial discharge ports
ance and low life-cycle costs. The highly reliable hydraulic
and horizontal shaft.
1. Pump with motor and base frame.
design combined with the service-friendly layout of the
variants:
2. Bare shaft pump with base frame.
splitcase housing assures maximum benefits for the user.
• Suction and discharge flanges are PN 16 according to
3. Bare shaft pump; ie pump without motor and without
EN 1092-2 (DIN2501).
base frame.
All HS pumps are tested to ensure the performance requirements are achieved prior to delivery. The HS is a well-built, reliable splitcase pump proudly offered by Grundfos – the
Applications
splitcase pump market leaders!
The Grundfos HS pumps are used in these main fields of application:
• The pump is long-coupled with a totally enclosed fan-
• The split-case construction enables removal and
cooled standard motor with main dimensions to IEC
dismantling of the internal pump parts, e.g. bearings,
and DIN standards and mounting designation B3
wear rings, impeller and shaft seal, without disturbing
(IM 1001).
the motor and pipework.
Technical Data Flow, Q:
10 to 2500m3/hr
Commercial systems
• The mechanical shaft seal has dimensions according
• Replaceable case wear rings protect the pump casing
Head, H:
5 to 148m
• Air-conditioning and chilled water system
while reducing maintenance costs and maintaining
Motor, range:
1.5 – 600kW
• Water condensing systems and cooling towers
high operating efficiencies.
Motor, cycles:
50 Hz
• District heating plants and heating systems
Operating Pressure: 16 bar, max.
to EN 12756.
• The rotating assembly is dynamically balanced
according to ISO 1940 class G6.3.
• Pump and motor are mounted on a common base
Liquid temperature: Up to 100°C
Industrial systems
Discharge Sizes:
50 – 350mm
• Process cooling and chilled water systems
• Impellers are double suction providing long operating,
Impeller Sizes:
242 – 630mm
• Industrial heating systems
corrosion free life. Impellers are constructed in
• Bronze shaft sleeves protect the shaft and help with
• Washdown and cleaning systems
ASTM B584 bronze and are hydraulically balanced.
Water distribution • Public waterworks • Non-potable water systems Irrigation and agriculture • Field irrigation (flooding) • Sprinkler irrigation
frame in the form of a welded, steel C-channel profile.
fixation of the impeller.
SELLING FEATURES Pump casing
Bearing Housing
• Compensated double volute design virtually eliminates
• Grundfos superior design combines seal and bearing
radial forces caused by a hydraulic imbalance inherent
chambers to allow inspection without removing the top
in pump volutes
half of the pump casing – saving time, reducing the use
• Double volute design extends seal and bearing life,
of lifting equipment, and decreasing the safety risk
minimizing noise and vibration, and improving
• Compact, robust housing construction has a 360-degree
operating efficiency – meaning less wear and lower
machined fit and limits shaft deflection and optimizes
maintenance costs
alignment
Coupling guard - stainless steel
Motor
Impeller Coupling - Grid
• Extended vanes and enlarged eye contribute to a reduction in vibration and noise Coupling • Grundfos specified grid coupling designed to meet the pump torque requirements provides long service life and reduced maintenance costs Shaft
Impeller Shaft sleeve
Base plate
Wear ring
Shaft seal Bearing Pump housing Bearing housing
HS range over view 2/4/6 pole motors H [m]
HS
Vers ion 5 2-pole, 50 Hz
140 120
125- 100-305
100 80 65-50-242
100-80-242
Documentation Data Booklet
Service Instructions
• Technical product descriptions
• Description of service procedures
• Product applications
• Intended for service technicians
• Performance curves
• Available in WebCAPS
• Accessories
125- 100-280
60
• Available in WebCAPS
50
WebCAPS/WinCAPS • Pump selection program
40
30
20
I&O
• PDF literature files available
• Installation and operation
• Service videos
• Warnings and safety requirements
• Replacement pump information
• Targeted for installers, servicers, and end-users
• Pump CAD drawings
• Shipped with the pump
14
10 20
25
30
40
50
60
80
100
150
200
250
300
400
500
Q [m�/h]
H [m]
HS
Vers ion 5 4-pole, 50 Hz
200
important service & installation information
150 350-250-630
100 80
200-150-508
200-150-483
60
35
300-200-489
50
1 50-1
40
1
30
200-150-381
025
0-3 8
0-4 98
10 Ways to Kill Your HS Pump
1
250-200-381
65-50-331
25
2 5-38
125-100-381
100-80-356
30
0-2 5
200-150-305A
20
20 015
125-100-305
15 65-50-242
03
05 C
300-250-305
100-80-242
400-350-397
10 8
150-125-305
2. Starve it Never grease or oil the pump.
250-200-305
6 5 125-100-280
4 20
30
H [m]
40
50 60
HS
70
Vers ion 5 6-pole, 50 Hz
60 50
80
100
150
200
300
400 500 600
1. Overwork it Work the pump continuously at higher capacities, flows, heads, or speeds than originally specified.
800 1000
1500 2000
3000
Q [m�/h]
3. Choke it • Lower the water level in the sump. • Let the suction strainer clog and never clean it. • Let the temperature of fluid rise without raising the suction pressure.
8. Shake it Don’t align at installation or install on a flimsy foundation.
350-250-630
40
4. Fry it Operate at shutoff for a long time with the bypass line closed tight will convert your power to heat.
200-150-508
30 200-150-483
300-200-489
350-250-498
20 350-300-508
15 250-200-381
300-250-381
400-350-397
5. Poison it Change the pumped fluid without checking with the manufacturer (for example adding chemicals).
10
6. Stab it Remove the suction strainers which will introduce grit, sand, and scale into the fluid.
8 7
300-250-305
6 5 4 60
80
100
150
200
300
400
500 600
800
1000
1500
2000 2500
Q [m�/h]
7. Break its limbs Impose heavy piping loads on the suction and discharge nozzle, either through initial misalignment or through thermal expansion.
9. Drown it For a packed pump with a drain for the gland leakage: • Plug the drain with a cigarette butt, gum or paper. • Remove the water shield. • Line up the splits on the packing rings. 10. Neglect check-ups • Ignore the manufacturer’s recommendations for “check-ups” • Don’t check packing, gaskets, o-rings, or other small parts. • Don’t ever repaint it, or lubricate the coupling, if required. • Don’t check vibration.
For product requests, please contact:
[email protected]
Grundfos A/S
Poul Due Jensens Vej 7 DK-8850 Bjerringbro Tel: +45 87 50 14 00
www.grundfos.com/industry The name Grundfos, the Grundfos logo, and the payoff Be–Think–Innovate are registrated trademarks owned by Grundfos Management A/S or Grundfos A/S, Denmark. All rights reserved worldwide.
PN 97718637
Being responsible is our foundation Thinking ahead makes it possible Innovation is the essence