Furnware Lighting Product Selection 2014

Furnware Lighting Product Selection

CON TAC T U S | FU R N WAR E TR AD IN G C o.

Website Website www.furnware.net.au

Telephone Phone 02 9548 4888 International +61 2 9548 4888 Free Call 1800 101 009

Facsimile Our comprehensive range of products is continually being evaluated and improved

Fax 02 9548 6191

Email Email [email protected]

Address Postal PO Box 250 Engadine, NSW 2233 Head Office 18 Burns Road Heathcote, NSW 2233 Distribution Centre 1-5 Jessica Place Prestons, NSW 2170

Trading Hours Office Opening Hours 8am to 5pm Monday - Friday

© Copyright 2014 All Rights Reserved. Prices & specifications subject to change without notice.

ABN 78 588 941 715

F u r n w a r e L i g h t i n g P r o d u c t S e l e c t i o n 2014

© Copyright 2014 All Rights Reserved. Prices & specifications subject to change without notice.

F re e C a l l 1 8 0 0 1 0 1 0 0 9

Fax 02 9548 6191

E m a i l s a l e s @ f u r n w a re . n e t . a u

We b s i t e w w w. f u r n w a re . n e t . a u

1

Furnware Lighting Product Selection

The team at Furnware are proud to release the latest range of Domus Line cabinet lighting, designed and manufactured in Italy, of which we are the sole Australian distributor. Domus Line’s range of cabinet lighting brings together quality products, cutting-edge technology, responsible environmental values and the very latest in stylish and fashionable lighting solutions. Together we have developed and extended the LED lighting range and continue to develop an already wide range of accessories. This brochure showcases our full collection of Domus Line lighting, and the detailed product descriptions and images make this extensive range the 1st choice for decision-makers, cabinet makers, designers and architects. The Furnware Lighting Product Selection Guide 2014 is our view of the future of cabinet lighting, and we welcome you to leaf through these pages and be inspired by this innovative and beautiful range

© Copyright 2014 All Rights Reserved. Prices & specifications subject to change without notice.

of lighting solutions.

2

F u r n w a r e L i g h t i n g P r o d u c t S e l e c t i o n 2014

Contents Introduction

4

© Copyright 2014 All Rights Reserved. Prices & specifications subject to change without notice.

12V dc Metris V12

10

Kite

18

Skate

24

Smarty

30

Kayak

36

Dream

42

Leaf DR

48

Flexyled

54

Profile

74

Skyline

78

Goccia

84

IR Sensor

90

IR MK2 Sensor

92

Capsens V13 Sensor

94

IFR Sensor

96

TLD Sensor

98

350mA Pixel

100

Led Drivers

106

Technical Information

108

F re e C a l l 1 8 0 0 1 0 1 0 0 9

Fax 02 9548 6191

E m a i l s a l e s @ f u r n w a re . n e t . a u

We b s i t e w w w. f u r n w a re . n e t . a u

3

Furnware Lighting Product Selection

Introduction Symbols Requires 12V dc constant voltage supply

MiniPlug Connectors

CR Connectors for continuous row installation Multicolour RGB Technology

Micro RGB Connectors

CH Chained

Requires 350mA constant current power supply

© Copyright 2014 All Rights Reserved. Prices & specifications subject to change without notice.

Polarised BUS Connector system

4

F u r n w a r e L i g h t i n g P r o d u c t S e l e c t i o n 2014

© Copyright 2014 All Rights Reserved. Prices & specifications subject to change without notice.

Introduction

F re e C a l l 1 8 0 0 1 0 1 0 0 9

Fax 02 9548 6191

E m a i l s a l e s @ f u r n w a re . n e t . a u

We b s i t e w w w. f u r n w a re . n e t . a u

5

Furnware Lighting Product Selection

Introduction Lighting Innovation

What Is A Light Emitting Diode? A Light Emitting Diode (LED) is a ‘solid state’ electronic component with the characteristics of a diode i.e. it only allows electrical current to flow in one direction through it. When the current flows through an LED in the correct direction, the LED produces light of a specific colour. LED’s only produce light of certain specific colour. Due to a variation in the method used to manufacture LEDs that emit white light, different colour temperatures are available - e.g. 6500 K, 5500 K, 4700 K, 3200 K and 2700 K.

How Do LEDs Work? The component parts of a discrete LED

At the heart of every LED there is a very small piece of semi-conducting material called the LED ‘die’. The die can be considered in the same way as the filament in a lamp, because it is the die that produces the light. The size of a high power LED die is approximately a 1mm cube and for other LED types much smaller. The base of the die is glued or soldered into a fine metal framework (the lead frame). A very fine wire called a bond wire is attached to the top of the LED die, which has a very fine conductive metal pattern on it. The wire is attached to the other side of the lead frame. When electricity of the correct voltage and polarity is applied to the LED via the lead frame contacts, current flows through the die. The different properties of the layers in the die cause between 50 and 90% of this electrical energy to be converted into light at the junction by a process called ‘injection electroluminescence’. This process is significantly more efficient than virtually any other light source! Injection electroluminescence does not require heat like a filament lamp (incandescence) or chemicals that glow like those used for a fluorescent tube (fluorescence). It is a phenomenon that is caused entirely by atomic differences

Efficiency Unfortunately, a large proportion of the light produced at the junction does not escape from the die and is reabsorbed, the remainder being converted to heat. As this is an ongoing development process, efficiency is increasing continuously. Even so, the LED is very efficient compared to conventional light sources. For example, an LED spotlight will consume only 5 to 10% of the energy of a halogen spotlight to achieve the same performance. Electroluminescence from an LED die. The bond wire can be seen at the top.

6

F u r n w a r e L i g h t i n g P r o d u c t S e l e c t i o n 2014

© Copyright 2014 All Rights Reserved. Prices & specifications subject to change without notice.

in the material caused by doping.

LED History & Evolution Light Emitting Diodes or LEDs operate very differently to filament lamps, discharge lamps and fluorescent tubes. They operate by ‘Injection electroluminescence’, a phenomenon first observed in 1907 by H. J. Round experimenting with Silicon Carbide. However, as he was really looking for new ways of radiolocation in seafaring, his discovery was completely forgotten about. • It wasn’t until 1962 that the first red LEDs were invented. • The first digital watch, the 1972 Pulsar ‘Time Computer’, used LEDs for its display. • By the mid 70’s other colours had joined red including yellow, orange and green, although the efficiency and light output was still very poor. • Between 1970 and 1995 the light output of red LEDs increased by a factor of approx 45 and between 1995 and 2003 the efficiency of LEDs increased by an light output per LED package by a factor of 430. The net result is that today LEDs have the efficiency and light output to be considered for many varied applications including traffic signals and signs, large area video displays, car instrument and switch illumination. Since 2005 further developments have seen a rapid growth in the use of LEDs for higher levels of illumination. For example LEDs replaced incandescent lamps (including headlamps) in cars in 2010. In December 2007 Italy decided to join Australia and Ireland to ban incandescent light bulbs. The ban took place in 2011. More European countries are planning on following Irelands and Australia’s “bright” decision in the near future. LEDs are already used for general lighting applications and decorative lighting and will replace many conventional light sources in the near future.

Timeline of LED Development 1907: The phenomenon of electroluminescence was first observed in a piece

© Copyright 2014 All Rights Reserved. Prices & specifications subject to change without notice.

of Silicon Carbide (SiC) by Henry Joseph Round. The light emitted was too dim to be of practical use. 1950s: British experiments using the semiconductor Gallium Arsenide (GaAs) let to the first LED in the early 1960s. It produced infra-red light and was used in sensing and photo-electric circuits. 1962: The first visible light LEDs were produced. They were red and not very efficient. 1970s: Green LEDs were produced, and then yellow ones followed. Yellow was initially achieved by combining red and green LEDs in one package. 1980s: The first ‘super-bright’ LEDs were produced by using Gallium Aluminium Arsenide Phosphide (GaAlAsP). They appeared first in red, then yellow and green. Early 1990s: Ultra-bright LEDs were produced using Indium Gallium Aluminium Phosphide (InGaAlP). The first blue LEDs started to appear. They used Silicon Carbide, but their output was very dim. Mid-late 1990s: Ultra-bright blue Gallium Nitride (GaN) LEDs arrived in the mid 1990s. These gave rise to white LEDs, in which the blue light from the chip is absorbed by fluorescent phosphors and re-emitted as white light. Early 2000s: Recently developed LEDs are now producing ultra-violet light. Efficiency of all LEDs is greater than ever.

F re e C a l l 1 8 0 0 1 0 1 0 0 9

Fax 02 9548 6191

E m a i l s a l e s @ f u r n w a re . n e t . a u

We b s i t e w w w. f u r n w a re . n e t . a u

7

Furnware Lighting Product Selection

Introduction White LEDs An LED die emits coloured light that is virtually monochromatic, so to produce white light a technique is used that is similar to that used in fluorescent tubes. In a fluorescent tube, a gas discharge produces ultra violet light which causes a phosphor coating mix on the inside of the glass tube to fluoresce and emit usable white light.

Structure of a single chip white LED: • A phosphor is added to the normally clear epoxy covering the LED die. Alternatively the latest technology provides a more homogeneous white light using chip level conversion (CLC), applying a thin phosphor layer on top of the die. • A blue LED die stimulates the phosphor. • The phosphor emits a yellowish light. • The light from the phosphor and the blue LED combine to produce white light of different colour temperatures.

Colour Temperature Because the white light is produced by mixing the light from two sources (die and phosphor) and the proportions of light from the two sources can vary, the colour temperature of a white LED can lie between 2700 K and 11000 K. Grouping of these LEDs is therefore essential to ensure that there is little perceived difference in colour between individual discrete LEDs or LED modules. The luminous efficacy of white LEDs is better than a tungsten halogen lamp. Typical warm white LED Typical natural white LED

Multi-colour LEDs blue, can be mixed together to produce a wider range of colours. By incorporating a red, green and blue (RGB LED) die into the same package the LED can be used for applications ranging from large area video screens using up to 50,000 LEDs per square metre, to colour changing luminaries for lighting whole buildings.

Individual die red, green and blue.

LED RGB into the same package

8

F u r n w a r e L i g h t i n g P r o d u c t S e l e c t i o n 2014

© Copyright 2014 All Rights Reserved. Prices & specifications subject to change without notice.

The light from individual LEDs, particularly the primary colours red, green and

Why Use LEDs For Lighting

nature’sfriend

Key features: • Long life (up to 50.000 operative hours with 70% of the luminous flux

taking care

cold attitude nature’s friend

go ahead

guaranteed) clean light without components IR and UV high safety factor due to the low voltage feed • Very low heat dispersion (no burn risk) • No maintenance costs • Very low Energy consumption • Instant lighting (less then 100ns) • High performances

Reliability Unlike the majority of lamps, LEDs do not suffer ‘catastrophic failures’ (i.e. stop producing light in normal operation). With an LED, the light output gradually reduces over time, the rate of light output reduction being dependent primarily on the average operating temperature of the LED die (the junction temperature). As the time for the light output of an LED to decline to a level where it is no longer usable could be tens of years, then the agreed method for specifying LED lifetime is the time after which the light output falls to 50% of its original value. Even with this method, the lifetime for LEDs under the right conditions can be as much as 150,000 hours (17 years) continuous operation and the LED is still emitting usable light ! As LEDs are solid in their construction and are not made from fragile materials they have a high immunity to shock and vibration.

Efficiency As mentioned above, it currently needs only 1 white LEDs to duplicate the light output of a 20 Watt halogen bulb, but the power consumption of the LEDs © Copyright 2014 All Rights Reserved. Prices & specifications subject to change without notice.

would only be 1.2 Watts! However, a fluorescent lamp would consume in the region of 8 Watts to produce the same amount of light. At present white LEDs can offer energy efficient alternatives in some, but not all applications. In applications where colour is utilised, LEDs often offer a higher efficiency than filtered white light sources, including fluorescent tubes which reduces heat dissipation, energy costs and the size and cost of power supplies. This in turn reduces the design and construction cost of luminaries as there is no need to accommodate LED replacement or to deal with very high temperatures.

F re e C a l l 1 8 0 0 1 0 1 0 0 9

Fax 02 9548 6191

E m a i l s a l e s @ f u r n w a re . n e t . a u

We b s i t e w w w. f u r n w a re . n e t . a u

9

Furnware Lighting Product Selection

Metris V12 Professional fixtures for accent lighting Materials: Thermoplastic Polymer

12V

Finishes: White, polished chrome, satin nickel Light Sources: LED module with pix-screen light Installation: Recessed and surface mounted

The METRIS collection has been developed around the METRIS Ø 57/60

Metris V12

spotlight which integrates a ‘light sandwich’ composed of a 24 LED

1,2

8

module and a high-performance pix-screen light. The METRIS range allows for seven different configurations including fully recessed,

Ø 70,5

surface mounted and angled surface mounted. The extra thin 8mm installation depth and 57-60mm diameter hole of the basic fitting

Metris SP

makes METRIS a perfect replacement for halogen spotlights. The low heat output of LEDs means that this spotlight can be safely recessed into an 8mm hole in 16mm board without having to allow for ventilation and heat gaps. The high performance of the LEDs (120 lumen per watt), the carefully selected colour temperatures 32

8

Metris OB

Ø7

0,5

(warm white and the new natural white), the high yield pix-screen light, and the wide range of mounting accessories available (surface mounting spacers, inclined spacers, stainless steel mountings for

Giza

easy retrofitting, sensors and cabling) make the METRIS collection a truly versatile light source that is quick and easy to install and

Akira V12

Maya

Evometris

10

F u r n w a r e L i g h t i n g P r o d u c t S e l e c t i o n 2014

© Copyright 2014 All Rights Reserved. Prices & specifications subject to change without notice.

suitable for an infinite variety of applications.

Metris V12

© Copyright 2014 All Rights Reserved. Prices & specifications subject to change without notice.

12V

F re e C a l l 1 8 0 0 1 0 1 0 0 9

Fax 02 9548 6191

E m a i l s a l e s @ f u r n w a re . n e t . a u

We b s i t e w w w. f u r n w a re . n e t . a u

11

Furnware Lighting Product Selection

Metris V12 Housing

Technopolymer

Diffusers

Methacrylate with multi-optics

Finishes

White (WH)



Polished Chrome (CP)



Satin Nickel (SN)

Colour Appearance

Natural white

Colour Temperature

4000 ÷ 4500 Kelvin

Luminous Efficacy

120 lm/W

Colour Rendering Index

Ra 70

Colour Appearance

Warm white

Colour Temperature

3050 ÷ 3250 Kelvin

Luminous Efficacy

120 lm/W

Colour Rendering Index

Ra 70

© Copyright 2014 All Rights Reserved. Prices & specifications subject to change without notice.

12V

Power supply

12

F u r n w a r e L i g h t i n g P r o d u c t S e l e c t i o n 2014

Metris V12

Universal Recessed Installation

For recessed installation on wood shelf

Metris OB Ø 8mm

Metris SP

12V

The 8mm installation depth makes METRIS a truly universal fitting. It can be flush mounted using a blind or through hole in timber panels. The fastening system is quick and does not require tools and is achieved through lateral pressure provided by harmonic steel springs. The power cable is 2000mm long and is fitted with MiniPlug connectors that can be passed through a hole with a minimum size of 8mm diameter.

Surface Installation Two types of spacers allow for surface mounting of METRIS lights. The SP version is a straight mounting block 12mm high. The OB version has a 20° angle to allow the fitting to be installed against a vertical surface where the power cable can be easily hidden at the back of the cabinet, whilst ensuring uniform lighting of the

Ø 8mm

worktop surface.

Evometris

Giza

© Copyright 2014 All Rights Reserved. Prices & specifications subject to change without notice.

Ø 8mm

Stainless Steel Spacer Installation

Ø 8mm

Maya

There are three types of stainless steel spacers in the METRIS range all being surface mounted and being ideal for retrofitting situations. EVOMETRIS and MAYA both have extended housings which run back to the vertical surface allowing the power cables to be easily hidden, while moving the light position further forward. GIZA is a more traditional triangular housing having a 20° angle of inclination which allows the light to spread further away from the vertical surface.

Ø 8mm

Akira V12

Recessed Installation with Switch AKIRA V12 unites the versatility of a recessed spotlight with the practicality of an integrated switch. The mounting is stainless steel with a black rocker switch. Minimum hole depth is 12mm.

F re e C a l l 1 8 0 0 1 0 1 0 0 9

Fax 02 9548 6191

E m a i l s a l e s @ f u r n w a re . n e t . a u

We b s i t e w w w. f u r n w a re . n e t . a u

13

Furnware Lighting Product Selection

Metris V12 Metris V12 Made in Italy to comply with Australian Standards 24 LEDs - Total 1.6W

12V

12 Volt 2m cable with MiniPlug Connectors Available in Chrome Plated, Satin Nickel or White 8mm installation depth Recessed LED light fitting only. For spacers and mounting see below. Part No.

Light Colour

Finish

DM12.WW

Warm White

CP, SN, WH

DM12.NW

Natural White

CP, SN, WH



Metris SP Spacer Made in Italy to comply with Australian Standards Spacer for surface mounting Metris lights Available in Chrome Plated, Satin Nickel and White

Part No.

Finish

METSP

CP, SN, WH

Metris OB Spacer Made in Italy to comply with Australian Standards 20° angled spacer for surface mounting Metris lights Available in Chrome Plated, Satin Nickel and White Spacer only. Light must be ordered separately (Metris V12 above).

14

F u r n w a r e L i g h t i n g P r o d u c t S e l e c t i o n 2014

Part No.

Finish

METOB

CP, SN, WH

© Copyright 2014 All Rights Reserved. Prices & specifications subject to change without notice.

Spacer only. Light must be ordered separately (Metris V12 above).

Giza V12 Made in Italy to comply with Australian Standards 24 LEDs - Total 1.6W 12 Volt

12V

2m cable with MiniPlug Connectors 18/10 Brushed stainless steel Matches Satin Nickel (SN) lights Part No.

Light Colour

Finish

DGZV12.WW

Warm White

SS

DGZV12.NW

Natural White

SS



Akira V12 Made in Italy to comply with Australian Standards Recessed Metris V12 light with intergrated rocker switch 24 LEDs - Total 1.6W 12 Volt 2m cable with MiniPlug Connectors 18/10 Brushed stainless steel

© Copyright 2014 All Rights Reserved. Prices & specifications subject to change without notice.

Fitting complete with light Part No.

Light Colour

Finish

DMAK.WW

Warm White

SS

DMAK.NW

Natural White

SS



For compatible drivers see page 17

F re e C a l l 1 8 0 0 1 0 1 0 0 9

Fax 02 9548 6191

E m a i l s a l e s @ f u r n w a re . n e t . a u

We b s i t e w w w. f u r n w a re . n e t . a u

15

Furnware Lighting Product Selection

Metris V12 Maya V12 Made in Italy to comply with Australian Standards 24 LEDs - Total 1.6W

12V

12 Volt 2m cable with MiniPlug Connectors 18/10 Brushed stainless steel Matches Satin Nickel (SN) lights Part No.

Light Colour

Finish

DMAV12.WW

Warm White

SS

DMAV12.NW

Natural White

SS



Evometris V12 Made in Italy to comply with Australian Standards 24 LEDs - Total 1.6W 12 Volt 2m cable with MiniPlug Connectors 18/10 Brushed stainless steel Matches Satin Nickel (SN) lights Part No.

Light Colour

Finish

DEVM12.WW

Warm White

SS

DEVM12.NW

Natural White

SS



16

F u r n w a r e L i g h t i n g P r o d u c t S e l e c t i o n 2014

© Copyright 2014 All Rights Reserved. Prices & specifications subject to change without notice.



Extension Cable - MiniPlug

Use for extending cable between LED Driver distribution block, and the light fitting

Part No.

Length (L) m

DEXTMP.1M

1 metre

DEXTMP.2M

2 metre

12V

This cable should be kept to the minimum length possible and must not exceed 6m total length



Distributor Block Extension - MiniPlug Distributor block extension with 12 MiniPlug Sockets Suitable for all 12V dc Domus lights Part No. DMP12.DIS

© Copyright 2014 All Rights Reserved. Prices & specifications subject to change without notice.



12V dc LED Drivers Fully approved to Australian Standards Supplied with 2m lead and plug Supplied with 12 MiniPlug Socket distributor block connected Part No.

Maximum Wattage

DSNP15.12

15W

DSNP30.12

30W

LED Driver Capacity 15W - Suitable for up to 8 x Metris V12 lights 30W - Suitable for up to 16 x Metris V12 lights

F re e C a l l 1 8 0 0 1 0 1 0 0 9

Fax 02 9548 6191

E m a i l s a l e s @ f u r n w a re . n e t . a u

We b s i t e w w w. f u r n w a re . n e t . a u

17

Furnware Lighting Product Selection

Kite Collection Architectural fixtures for accent lighting Materials: Thermoplastic Polymer

12V

Finishes: White, Satin Nickel Light sources: LED modules for pix-screen light Installation: Surface Design patent pending DOMUS Line continues its quest for new frontiers in cabinet lighting

Kite TLDM

with the all new KITE collection. Born out of the encounter with renowned Italian designer Giuseppe Bavuso’s creativity, the KITE range renews the aesthetics of under cabinet lighting conventions with a formal, technological approach and meticulous attention to detail. The result is an essentially minimalist object where the smooth lines incorporate a technical advantage. The KITE fixture, developed with a ‘lighting sandwich’ made up of 24 LED modules

Kite Slave

and a high performance pix-screen light has the option of an integrated multi-function TouchLED dimmer switch for under cabinet applications. The TouchLED switch incorporates a master dimmer which simultaneously controls all the LED ‘slave’ lights connected to it. The clever concealed slide mounting system hides the power supply cord directly behind the rear of the LED fitting and the slight inclination of the light module ensures a uniform illumination of the work surface. Available in two modern finishes Satin Nickel and White, the KITE collection features the new Natural White

© Copyright 2014 All Rights Reserved. Prices & specifications subject to change without notice.

LED colour. Design patents pending.

18

F u r n w a r e L i g h t i n g P r o d u c t S e l e c t i o n 2014

Kite Collection

© Copyright 2014 All Rights Reserved. Prices & specifications subject to change without notice.

12V

F re e C a l l 1 8 0 0 1 0 1 0 0 9

Fax 02 9548 6191

E m a i l s a l e s @ f u r n w a re . n e t . a u

We b s i t e w w w. f u r n w a re . n e t . a u

19

Furnware Lighting Product Selection

Kite Collection Housing

Technopolymer

Diffusers

Methacrylate with multi-optics

12V

Power supply Finishes

White (WH)



Satin Nickel (SN)

TouchLED TLD Sensor Operation Colour Appearance

Natural white

Colour Temperature

4000 ÷ 4500 Kelvin

this innovative device into many of their latest

Luminous Efficacy

120 lm/W

lighting designs. This multi-function switch

Colour Rendering Index

Ra 70

Domus Line have perfected the TLD Sensor ‘TouchLED’ dimmer switch and incorporated

also has been added to the ‘master and slave’ lighting system in some devices. The switching on/off of the devices connected to the TLD Sensor is carried out with the single touch of the LED on the TLD Sensor. It is possible to adjust the intensity of the light by holding a finger on the LED. A brief flash of the LED indicates that maximum brightness has been reached. The brightness level will be memorized until the next adjustment. The TLD Sensor also integrates a ‘night-light’ function which activates only when the devices are switched off. In a daylight or bright environment, the LED on the TLD Sensor glows brightness of the LED increases providing a handy ‘night-light’ function. The ‘night-light’ function can be activated or deactivated by holding a finger on the TLD Sensor for 15 seconds after which, the deactivation of the function will be notified by 2 slow flashes of the LED, or its activation by 3 fast flashes. The TLD Sensor is fitted with a safety program that turns off all connected devices after 18 hours of continuous operation. A further feature of the TLD Sensor is ‘auto-on’ that automatically turns on the connected LED fittings at the previously set luminosity. This function is especially useful for the automatic turning on of a collection of Lights for example in a show room. When the main light switches are turned on, the detail lighting will activate at their various pre-set brightness without having to adjust all the levels individually.

20

F u r n w a r e L i g h t i n g P r o d u c t S e l e c t i o n 2014

© Copyright 2014 All Rights Reserved. Prices & specifications subject to change without notice.

with a soft dim light. With low or no light, the

Surface Installation with Sliding Bracket KITE is surface-mounted, using an innovative sliding bracket system. The fixture has a Connectors and the power supply cord. This

12V

rear compartment which hides the MiniPlug means that the KITE can be easily installed after the cabinet has been installed. The power supply cable is 2 metres long and come complete with MiniPlug Connectors. The projection angle ensures a uniform illumination of the work surface.

Master and Slave System – Set-up example

KITE TLDM incorporates a multi-function TouchLED dimmer switch that can be used as a single LED fitting, or can be used as a master control for other LED fittings. This feature simultaneously controls all ‘salve’ fittings

© Copyright 2014 All Rights Reserved. Prices & specifications subject to change without notice.

connected to it. The output cable of the KITE TLDM can supply up to a maximum of 30W @ 12V dc including the load of the master fitting. One KITE TLDM can control up to 16 KITE slave fittings. Please ensure power supply has sufficient capacity to supply all the light fittings.

F re e C a l l 1 8 0 0 1 0 1 0 0 9

Fax 02 9548 6191

E m a i l s a l e s @ f u r n w a re . n e t . a u

We b s i t e w w w. f u r n w a re . n e t . a u

21

Furnware Lighting Product Selection

Kite Collection Kite TLDM - Master Made in Italy to comply with Australian Standards Integrated master touch dimmer switch with night light feature

12V

Use with Kite Slave (below) to create a master & slave system 24 high performance LEDs Can be used as a stand alone unit with dimmer switch 1.6W (TLD master dimmer maximum load 30W) 2m cable with MiniPlug Connectors Fitting only. (LED driver must be ordered separately). Part No.

Light Colour

Finish

DKTEMST.NW

Natural White

WH, SN





Kite Slave Made in Italy to comply with Australian Standards Use with Kite TLDM (above) to create a master & slave system 24 high performance LEDs Can be used as a stand alone unswitched unit 1.6W 2m cable with MiniPlug Connectors

Part No.

Light Colour

Finish

DKTESLA.NW

Natural White

WH, SN



22

F u r n w a r e L i g h t i n g P r o d u c t S e l e c t i o n 2014



© Copyright 2014 All Rights Reserved. Prices & specifications subject to change without notice.

Fitting only. (LED driver must be ordered separately).

Extension Cable - MiniPlug

Use for extending cable between LED Driver distribution block, and the light fitting

Part No.

Length (L) m

DEXTMP.1M

1 metre

DEXTMP.2M

2 metre

12V

This cable should be kept to the minimum length possible and must not exceed 6m total length



Distributor Block Extension - MiniPlug Distributor block extension with 12 MiniPlug Sockets Suitable for all 12V dc Domus lights Part No. DMP12.DIS

© Copyright 2014 All Rights Reserved. Prices & specifications subject to change without notice.



12V dc LED Drivers Fully approved to Australian Standards Supplied with 2m lead and plug Supplied with 12 MiniPlug Socket distributor block connected Part No.

Maximum Wattage

DSNP15.12

15W

DSNP30.12

30W

LED Driver Capacity 15W - Suitable for up to 8 x Kite lights 30W - Suitable for up to 16 x Kite lights

F re e C a l l 1 8 0 0 1 0 1 0 0 9

Fax 02 9548 6191

E m a i l s a l e s @ f u r n w a re . n e t . a u

We b s i t e w w w. f u r n w a re . n e t . a u

23

Furnware Lighting Product Selection

Skate Collection Architectural fixtures for accent lighting Materials: Thermoplastic Polymer

12V

Finishes: White, Satin Nickel Light sources: LED modules for pix-screen light Installation: Surface Design patent pending The SKATE collection, designed by renowned Italian designer

Skate TLDM

Giuseppe Bavuso, is a masterpiece combination of research, technology and style. The result is a minimalist aesthetic object whose main appeal is in its simplicity, yet hidden within is a highly advanced technological core. The SKATE fixture, developed with a ‘lighting sandwich’ made up of 24 LED modules and a high performance pixscreen light has the option of an integrated multi-function TouchLED dimmer switch for under cabinet applications. The TouchLED switch

Skate Slave

incorporates a master dimmer which simultaneously controls all the LED ‘slave’ lights connected to it. The clever concealed slide mounting system hides the power supply cord directly behind the rear of the LED fitting and the slight inclination of the light module ensures a uniform illumination of the work surface. Available in two modern finishes Satin Nickel and White, the SKATE collection features the new

© Copyright 2014 All Rights Reserved. Prices & specifications subject to change without notice.

Natural White LED colour. Design patents pending.

24

F u r n w a r e L i g h t i n g P r o d u c t S e l e c t i o n 2014

Skate Collection

© Copyright 2014 All Rights Reserved. Prices & specifications subject to change without notice.

12V

F re e C a l l 1 8 0 0 1 0 1 0 0 9

Fax 02 9548 6191

E m a i l s a l e s @ f u r n w a re . n e t . a u

We b s i t e w w w. f u r n w a re . n e t . a u

25

Furnware Lighting Product Selection

Skate Collection Housing

Technopolymer

Diffusers

Methacrylate with multi-optics

12V

Power supply



Finishes

White (WH)



Satin Nickel (SN)

TouchLED TLD Sensor Operation Colour Appearance

Natural white

Colour Temperature

4000 ÷ 4500 Kelvin

this innovative device into many of their latest

Luminous Efficacy

120 lm/W

lighting designs. This multi-function switch

Colour Rendering Index

Ra 70

Domus Line have perfected the TLD Sensor ‘TouchLED’ dimmer switch and incorporated

also has been added to the ‘master and slave’ lighting system in some devices. The switching on/off of the devices connected to the TLD Sensor is carried out with the single touch of the LED on the TLD Sensor. It is possible to adjust the intensity of the light by holding a finger on the LED. A brief flash of the LED indicates that maximum brightness has been reached. The brightness level will be memorized until the next adjustment. The TLD Sensor also integrates a ‘night-light’ function which activates only when the devices are switched off. In a daylight or bright environment, the LED on the TLD Sensor glows brightness of the LED increases providing a handy ‘night-light’ function. The ‘night-light’ function can be activated or deactivated by holding a finger on the TLD Sensor for 15 seconds after which, the deactivation of the function will be notified by 2 slow flashes of the LED, or its activation by 3 fast flashes. The TLD Sensor is fitted with a safety program that turns off all connected devices after 18 hours of continuous operation. A further feature of the TLD Sensor is ‘auto-on’ that automatically turns on the connected LED fittings at the previously set luminosity. This function is especially useful for the automatic turning on of a collection of Lights for example in a show room. When the main light switches are turned on, the detail lighting will activate at their various pre-set brightness without having to adjust all the levels individually.

26

F u r n w a r e L i g h t i n g P r o d u c t S e l e c t i o n 2014

© Copyright 2014 All Rights Reserved. Prices & specifications subject to change without notice.

with a soft dim light. With low or no light, the

Surface Installation with Sliding Bracket SKATE is surface-mounted, using an innovative sliding bracket system. The fixture MiniPlug Connectors and the power supply

12V

has a rear compartment which hides the cord. This means that the SKATE can be easily installed after the cabinet has been installed. The power supply cable is 2 metres long and come complete with MiniPlug Connectors. The projection angle ensures a uniform illumination of the work surface.

Master and Slave System – Set-up example

SKATE TLDM incorporates a multi-function TouchLED dimmer switch that can be used as a single LED fitting, or can be used as a master control for other LED fittings. This feature simultaneously controls all ‘slave’ fittings

© Copyright 2014 All Rights Reserved. Prices & specifications subject to change without notice.

connected to it. The output cable of the SKATE TLDM can supply up to a maximum of 30W @ 12V dc including the load of the master fitting. One SKATE TLDM can control up to 16 SKATE slave fittings. Please ensure power supply has sufficient capacity to supply all the light fittings.

F re e C a l l 1 8 0 0 1 0 1 0 0 9

Fax 02 9548 6191

E m a i l s a l e s @ f u r n w a re . n e t . a u

We b s i t e w w w. f u r n w a re . n e t . a u

27

Furnware Lighting Product Selection

Skate Collection Skate TLDM - Master Made in Italy to comply with Australian Standards Integrated master touch dimmer switch with night light feature

12V

Use with Skate Slave (below) to create a master & slave system 24 high performance LEDs Can be used as a stand alone unit with dimmer switch 1.6W (TLD master dimmer maximum load 30W) 2m cable with MiniPlug Connectors Fitting only. (LED driver must be ordered separately). Part No.

Light Colour

Finish

DSKMST.NW

Natural White

WH, SN



Skate - Slave Made in Italy to comply with Australian Standards Use with Skate TLDM (above) to create a master & slave system 24 high performance LEDs Can be used as a stand alone unswitched unit 1.6W 2m cable with MiniPlug Connectors

Part No.

Light Colour

Finish

DSKSLA.NW

Natural White

WH, SN



28

F u r n w a r e L i g h t i n g P r o d u c t S e l e c t i o n 2014

© Copyright 2014 All Rights Reserved. Prices & specifications subject to change without notice.

Fitting only. (LED driver must be ordered separately).

Extension Cable - MiniPlug

Use for extending cable between LED Driver distribution block, and the light fitting

Part No.

Length (L) m

DEXTMP.1M

1 metre

DEXTMP.2M

2 metre

12V

This cable should be kept to the minimum length possible and must not exceed 6m total length



Distributor Block Extension - MiniPlug Distributor block extension with 12 MiniPlug Sockets Suitable for all 12V dc Domus lights Part No. DMP12.DIS

© Copyright 2014 All Rights Reserved. Prices & specifications subject to change without notice.



12V dc LED Drivers Fully approved to Australian Standards Supplied with 2m lead and plug Supplied with 12 MiniPlug Socket distributor block connected Part No.

Maximum Wattage

DSNP15.12

15W

DSNP30.12

30W

LED Driver Capacity 15W - Suitable for up to 8 x Skate lights 30W - Suitable for up to 16 x Skate lights

F re e C a l l 1 8 0 0 1 0 1 0 0 9

Fax 02 9548 6191

E m a i l s a l e s @ f u r n w a re . n e t . a u

We b s i t e w w w. f u r n w a re . n e t . a u

29

Furnware Lighting Product Selection

Smarty Collection Architectural fixtures for accent lighting Materials: Thermoplastic Polymer

12V

Finishes: Satin Nickel Light sources: LED module with pix-screen light Installation: Surface Design patent pending The SMARTY collection, designed by renowned Italian designer

Smarty TLDM

Giuseppe Bavuso, is a unique combination of research, technology and style. The result is a minimalist aesthetic object whose main appeal is in its simplicity, yet hidden within is a highly advanced technological core. The SMARTY fixture, developed with a ‘lighting sandwich’ made up of 24 LED modules and a high performance pix-screen light has the option of an integrated multi-function TouchLED dimmer switch for under cabinet applications. The TouchLED switch incorporates a

Smarty Slave

master dimmer which simultaneously controls all the LED ‘slave’ lights connected to it. The clever concealed slide mounting system hides the power supply cord directly behind the rear of the LED fitting and the slight inclination of the light module ensures a uniform illumination of the work surface. Available in an attractive modern finish, Satin Nickel, the SMARTY collection features the new Natural White LED colour.

© Copyright 2014 All Rights Reserved. Prices & specifications subject to change without notice.

Design patents pending.

30

F u r n w a r e L i g h t i n g P r o d u c t S e l e c t i o n 2014

Smarty Collection

© Copyright 2014 All Rights Reserved. Prices & specifications subject to change without notice.

12V

F re e C a l l 1 8 0 0 1 0 1 0 0 9

Fax 02 9548 6191

E m a i l s a l e s @ f u r n w a re . n e t . a u

We b s i t e w w w. f u r n w a re . n e t . a u

31

Furnware Lighting Product Selection

Smarty Collection Housing

Technopolymer

Diffusers

Methacrylate with multi-optics

12V

Power supply Finishes

Satin Nickel (SN)

TouchLED TLD Sensor Operation Colour Appearance

Natural white

Colour Temperature

4000 ÷ 4500 Kelvin

this innovative device into many of their latest

Luminous Efficacy

120 lm/W

lighting designs. This multi-function switch

Colour Rendering Index

Ra 70

Domus Line have perfected the TLD Sensor ‘TouchLED’ dimmer switch and incorporated

also has been added to the ‘master and slave’ lighting system in some devices. The switching on/off of the devices connected to the TLD Sensor is carried out with the single touch of the LED on the TLD Sensor. It is possible to adjust the intensity of the light by holding a finger on the LED. A brief flash of the LED indicates that maximum brightness has been reached. The brightness level will be memorized until the next adjustment. The TLD Sensor also integrates a ‘night-light’ function which activates only when the devices are switched off. In a daylight or bright environment, the LED on the TLD Sensor glows brightness of the LED increases providing a handy ‘night-light’ function. The ‘night-light’ function can be activated or deactivated by holding a finger on the TLD Sensor for 15 seconds after which, the deactivation of the function will be notified by 2 slow flashes of the LED, or its activation by 3 fast flashes. The TLD Sensor is fitted with a safety program that turns off all connected devices after 18 hours of continuous operation. A further feature of the TLD Sensor is ‘auto-on’ that automatically turns on the connected LED fittings at the previously set luminosity. This function is especially useful for the automatic turning on of a collection of Lights for example in a show room. When the main light switches are turned on, the detail lighting will activate at their various pre-set brightness without having to adjust all the levels individually.

32

F u r n w a r e L i g h t i n g P r o d u c t S e l e c t i o n 2014

© Copyright 2014 All Rights Reserved. Prices & specifications subject to change without notice.

with a soft dim light. With low or no light, the

Surface Installation with Sliding Bracket SMARTY is surface-mounted, using an innovative sliding bracket system. The fixture MiniPlug Connectors and the power supply

12V

has a rear compartment which hides the cord. This means that the SMARTY can be easily installed after the cabinet has been installed. The power supply cable is 2 metres long and come complete with MiniPlug Connectors. The projection angle ensures a uniform illumination of the work surface.

Master and Slave System – Set-up example

SMARTY TLDM incorporates a multi-function TouchLED dimmer switch that can be used as a single LED fitting, or can be used as a master control for other LED fittings. This feature simultaneously controls all ‘slave’ fittings

© Copyright 2014 All Rights Reserved. Prices & specifications subject to change without notice.

connected to it. The output cable of the SMARTY TLDM can supply up to a maximum of 30W @ 12V dc including the load of the master fitting. One SMARTY TLDM can control up to 16 SMARTY slave fittings. Please ensure power supply has sufficient capacity to supply all the light fittings.

F re e C a l l 1 8 0 0 1 0 1 0 0 9

Fax 02 9548 6191

E m a i l s a l e s @ f u r n w a re . n e t . a u

We b s i t e w w w. f u r n w a re . n e t . a u

33

Furnware Lighting Product Selection

Smarty Collection Smarty TLDM - Master Made in Italy to comply with Australian Standards Integrated master touch dimmer switch with night light feature

12V

Use with Smarty Slave (below) to create a master & slave system 24 high performance LEDs Can be used as a stand alone unit with dimmer switch 1.6W (TLD master dimmer maximum load 30W) 2m cable with MiniPlug Connectors Fitting only. (LED driver must be ordered separately). Part No.

Light Colour

Finish

DSMMST.NW

Natural White

SN



Smarty - Slave Made in Italy to comply with Australian Standards Use with Smarty TLDM (above) to create a master & slave system 24 high performance LEDs Can be used as a stand alone unswitched unit 1.6W 2m cable with MiniPlug Connectors

Part No.

Light Colour

Finish

DSMSLA.NW

Natural White

SN



34

F u r n w a r e L i g h t i n g P r o d u c t S e l e c t i o n 2014

© Copyright 2014 All Rights Reserved. Prices & specifications subject to change without notice.

Fitting only. (LED driver must be ordered separately).

Extension Cable - MiniPlug

Use for extending cable between LED Driver distribution block, and the light fitting

Part No.

Length (L) m

DEXTMP.1M

1 metre

DEXTMP.2M

2 metre

12V

This cable should be kept to the minimum length possible and must not exceed 6m total length



Distributor Block Extension - MiniPlug Distributor block extension with 12 MiniPlug Sockets Suitable for all 12V dc Domus lights Part No. DMP12.DIS

© Copyright 2014 All Rights Reserved. Prices & specifications subject to change without notice.



12V dc LED Drivers Fully approved to Australian Standards Supplied with 2m lead and plug Supplied with 12 MiniPlug Socket distributor block connected Part No.

Maximum Wattage

DSNP15.12

15W

DSNP30.12

30W

LED Driver Capacity 15W - Suitable for up to 8 x Smarty lights 30W - Suitable for up to 16 x Smarty lights

F re e C a l l 1 8 0 0 1 0 1 0 0 9

Fax 02 9548 6191

E m a i l s a l e s @ f u r n w a re . n e t . a u

We b s i t e w w w. f u r n w a re . n e t . a u

35

Furnware Lighting Product Selection

Kayak Collection Architectural fixtures for accent lighting Materials: Thermoplastic Polymer

12V

Finishes: Satin Nickel Light sources: LED module with pix-screen light Installation: Surface Design patent pending DOMUS Line continues its quest for new frontiers in cabinet lighting

Kayak TLDM

with the all new KAYAK collection. Born out of the encounter with renowned Italian designer Giuseppe Bavuso’s creativity, the KAYAK range renews the aesthetics of under cabinet lighting conventions with a formal, technological approach and meticulous attention to detail. The result is an essentially minimalist object where the smooth lines incorporate a technical advantage. The KAYAK fixture, developed with a ‘lighting sandwich’ made up of 24 LED modules

Kayak Slave

and a high performance pix-screen light has the option of an integrated multi-function TouchLED dimmer switch for under cabinet applications. The TouchLED switch incorporates a master dimmer which simultaneously controls all the LED ‘slave’ lights connected to it. The clever concealed clip-on mounting system allows for recessed or surface mounting and the recessed edge of the light fitting hides the cut-out edge when used in a recessed situation. Available in the latest modern finish, Satin Nickel, the KAYAK collection features the

© Copyright 2014 All Rights Reserved. Prices & specifications subject to change without notice.

new Natural White LED colour. Design patents pending.

36

F u r n w a r e L i g h t i n g P r o d u c t S e l e c t i o n 2014

Kayak Collection

© Copyright 2014 All Rights Reserved. Prices & specifications subject to change without notice.

12V

F re e C a l l 1 8 0 0 1 0 1 0 0 9

Fax 02 9548 6191

E m a i l s a l e s @ f u r n w a re . n e t . a u

We b s i t e w w w. f u r n w a re . n e t . a u

37

Furnware Lighting Product Selection

Kayak Collection Housing

Technopolymer

Diffusers

Methacrylate with multi-optics

12V

Power supply Finishes

Satin Nickel (SN)

TouchLED TLD Sensor Operation Colour Appearance

Natural white

Colour Temperature

4000 ÷ 4500 Kelvin

this innovative device into many of their latest

Luminous Efficacy

120 lm/W

lighting designs. This multi-function switch

Colour Rendering Index

Ra 70

Domus Line have perfected the TLD Sensor ‘TouchLED’ dimmer switch and incorporated

also has been added to the ‘master and slave’ lighting system in some devices. The switching on/off of the devices connected to the TLD Sensor is carried out with the single touch of the LED on the TLD Sensor. It is possible to adjust the intensity of the light by holding a finger on the LED. A brief flash of the LED indicates that maximum brightness has been reached. The brightness level will be memorized until the next adjustment. The TLD Sensor also integrates a ‘night-light’ function which activates only when the devices are switched off. In a daylight or bright environment, the LED on the TLD Sensor glows brightness of the LED increases providing a handy ‘night-light’ function. The ‘night-light’ function can be activated or deactivated by holding a finger on the TLD Sensor for 15 seconds after which, the deactivation of the function will be notified by 2 slow flashes of the LED, or its activation by 3 fast flashes. The TLD Sensor is fitted with a safety program that turns off all connected devices after 18 hours of continuous operation. A further feature of the TLD Sensor is ‘auto-on’ that automatically turns on the connected LED fittings at the previously set luminosity. This function is especially useful for the automatic turning on of a collection of Lights for example in a show room. When the main light switches are turned on, the detail lighting will activate at their various pre-set brightness without having to adjust all the levels individually.

38

F u r n w a r e L i g h t i n g P r o d u c t S e l e c t i o n 2014

© Copyright 2014 All Rights Reserved. Prices & specifications subject to change without notice.

with a soft dim light. With low or no light, the

Surface Installation with Sliding Bracket KAYAK can be installed surface mounted or recessed into a pre-cut hole with the aid of design of the fitting, with a protruding lip,

12V

an innovative concealed bracket. The unique covers the edge of the hole in a recessed installation, yet still retains its great looks when surface mounted. KAYAK is equipped with a power supply cable 2000mm long with MiniPlug connectors which can be run through a hole of 8mm diameter. The power supply cable is detachable and allows the fitting to be installed easily after having fixed the cabinet to the wall.

Master and Slave System – Set-up example

KAYAK TLDM incorporates a multi-function TouchLED dimmer switch that can be used as a single LED fitting, or can be used as a master control for other LED fittings. This feature simultaneously controls all ‘slave’ fittings

© Copyright 2014 All Rights Reserved. Prices & specifications subject to change without notice.

connected to it. The output cable of the KAYAK TLDM can supply up to a maximum of 30W @ 12V dc including the load of the master fitting. One KAYAK TLDM can control up to 16 KAYAK slave fittings. Please ensure power supply has sufficient capacity to supply all the light fittings.

F re e C a l l 1 8 0 0 1 0 1 0 0 9

Fax 02 9548 6191

E m a i l s a l e s @ f u r n w a re . n e t . a u

We b s i t e w w w. f u r n w a re . n e t . a u

39

Furnware Lighting Product Selection

Kayak Collection Kayak TLDM - Master Made in Italy to comply with Australian Standards Integrated master touch dimmer switch with night light feature

12V

Use with Kayak Slave (below) to create a master & slave system 24 high performance LEDs Can be used as a stand alone unit with dimmer switch 1.6W (TLD master dimmer maximum load 30W) 2m cable with MiniPlug Connectors Fitting only. (LED driver must be ordered separately). Part No.

Light Colour

Finish

DKYKMST.NW

Natural White

SN



Kayak Slave Made in Italy to comply with Australian Standards Use with Kayak TLDM (above) to create a master & slave system 24 high performance LEDs Can be used as a stand alone unswitched unit 1.6W 2m cable with MiniPlug Connectors

Part No.

Light Colour

Finish

DKYKSLA.NW

Natural White

SN



40

F u r n w a r e L i g h t i n g P r o d u c t S e l e c t i o n 2014

© Copyright 2014 All Rights Reserved. Prices & specifications subject to change without notice.

Fitting only. (LED driver must be ordered separately).

Extension Cable - MiniPlug

Use for extending cable between LED Driver distribution block, and the light fitting

Part No.

Length (L) m

DEXTMP.1M

1 metre

DEXTMP.2M

2 metre

12V

This cable should be kept to the minimum length possible and must not exceed 6m total length



Distributor Block Extension - MiniPlug Distributor block extension with 12 MiniPlug Sockets Suitable for all 12V dc Domus lights Part No. DMP12.DIS

© Copyright 2014 All Rights Reserved. Prices & specifications subject to change without notice.



12V dc LED Drivers Fully approved to Australian Standards Supplied with 2m lead and plug Supplied with 12 MiniPlug Socket distributor block connected Part No.

Maximum Wattage

DSNP15.12

15W

DSNP30.12

30W

LED Driver Capacity 15W - Suitable for up to 8 x Kayak lights 30W - Suitable for up to 16 x Kayak lights

F re e C a l l 1 8 0 0 1 0 1 0 0 9

Fax 02 9548 6191

E m a i l s a l e s @ f u r n w a re . n e t . a u

We b s i t e w w w. f u r n w a re . n e t . a u

41

Furnware Lighting Product Selection

Dream Architectural devices for effective lighting Materials: Techno polymer

12V

Finishes: Grey dyed on the body Light sources: LED, RGB LED Installation: On the surface, semi-recessed or completely recessed Registered design As a result of research carried out by DOMUS Line’s technical staff,

Dream V10

DREAM brings together unique lighting effects and professional lighting solutions. DREAM is a courtesy light designed to be installed wherever decorative lighting is required. The DREAM unit is characterised by a stainless steel insert that acts as an anti-glare screen and a Soft Touch electronic switch. DREAM has a thickness of only 10mm and can be installed on the surface, either as semirecessed (keeping only the diffuser out of the recess) or completely

Dream RGB

recessed so that the unit is flush with the surrounding surface. Made from injection techno polymer, it has a polycarbonate diffuser with a satin finish. DREAM integrates a high power LED, whose light projection is conveyed inside the thin diffusing screen, exploiting the physical principle of total internal reflection. The full light effects, with lighting of the perimeter, and the ‘star’ effect which produces a blade of light that accentuates on the four corners, are unique to DREAM and have a strong effect. DREAM is also available with RGB technology and a built in colour it is possible to either choose your desired colour, or to start a wide ranging mix of colours from purple to pink, from orange to cyan, from deep blue to light blue and beyond! The colour changing sequence can be stopped at any desired colour making it possible to customise the light colour to suit your emotions. The design of the DREAM, with no sharp edges, very low heat output, and extra low voltage makes it an ideal lighting solution in hotels, and even for use in children’s bedheads.

42

F u r n w a r e L i g h t i n g P r o d u c t S e l e c t i o n 2014

© Copyright 2014 All Rights Reserved. Prices & specifications subject to change without notice.

changing sequencer. With a simple touch of the Soft Touch switch,

Dream

© Copyright 2014 All Rights Reserved. Prices & specifications subject to change without notice.

12V

F re e C a l l 1 8 0 0 1 0 1 0 0 9

Fax 02 9548 6191

E m a i l s a l e s @ f u r n w a re . n e t . a u

We b s i t e w w w. f u r n w a re . n e t . a u

43

Furnware Lighting Product Selection

Dream Housing

Polycarbonate

Diffusers Polycarbonate

12V

Power supply Light Grey (LTG)

© Copyright 2014 All Rights Reserved. Prices & specifications subject to change without notice.

Finishes

44

F u r n w a r e L i g h t i n g P r o d u c t S e l e c t i o n 2014

Universal Installation DREAM is a universal LED fitting. It can be installed on a flat surface with concealed recommend that a 7mm deep groove is created so that only the diffuser is left out to

12V

screws, it can be semi-recessed (we

enhance the unit’s full light effect) or flush mounted within a recess that is 10mm deep. The semi-recessed and the flush recess installations are made easier by the shape of the unit with 12.5mm radius corners. The power cord is 2 metres long and equipped with MiniPlug Connectors. The unit also has a Soft Touch electronic switch to turn it on, turn it off and to adjust the intensity of the light. Surface installation

Semi Built-in installation

© Copyright 2014 All Rights Reserved. Prices & specifications subject to change without notice.

Built-in installation

RGB Technology DREAM RGB is also available with RGB technology with LED lights that change colour. It has the same physical characteristics as the standard model. The operation and the adjustment of the colour is very simple and designed so that even children can use it. With a touch of the switch, the unit is turned on to the last colour saved. With a subsequent longer touch (3 seconds), the sequence of colours is activated (red, green, blue and all the intermediate shades). To stop the sequence on a favourite colour, quickly touch the switch when the desired colour has been found. To turn off DREAM RGB, stop the sequence of colours and then proceed with another short and fast touch.

F re e C a l l 1 8 0 0 1 0 1 0 0 9

Fax 02 9548 6191

E m a i l s a l e s @ f u r n w a re . n e t . a u

We b s i t e w w w. f u r n w a re . n e t . a u

45

Furnware Lighting Product Selection

Dream Dream V10 Made in Italy to comply with Australian Standards 12 Volt, 1.5W

12V

Cool white only Light grey body Integrated touch dimmer Part No.

Finish

DDV10.CW

LTG



Dream RGB Made in Italy to comply with Australian Standards 12 Volt, 4.0W Colour changing sequence, or can be stopped at any colour Light grey body Integrated touch switch Part No.

Finish

DDRGB.RGB

LTG

© Copyright 2014 All Rights Reserved. Prices & specifications subject to change without notice.



46

F u r n w a r e L i g h t i n g P r o d u c t S e l e c t i o n 2014

Extension Cable - MiniPlug

Use for extending cable between LED Driver distribution block, and the light fitting

Part No.

Length (L) m

DEXTMP.1M

1 metre

DEXTMP.2M

2 metre

12V

This cable should be kept to the minimum length possible and must not exceed 6m total length



Distributor Block Extension - MiniPlug Distributor block extension with 12 MiniPlug Sockets Suitable for all 12V dc Domus lights Part No. DMP12.DIS

© Copyright 2014 All Rights Reserved. Prices & specifications subject to change without notice.



12V dc LED Drivers Fully approved to Australian Standards Supplied with 2m lead and plug Supplied with 12 MiniPlug Socket distributor block connected Part No.

Maximum Wattage

DSNP15.12

15W

DSNP30.12

30W

LED Driver Capacity 15W - Suitable for up to 9 x Dream V10 or 3 x Dream RGB 30W - Suitable for up to 18 x Dream V10 or 7 x Dream RGB

F re e C a l l 1 8 0 0 1 0 1 0 0 9

Fax 02 9548 6191

E m a i l s a l e s @ f u r n w a re . n e t . a u

We b s i t e w w w. f u r n w a re . n e t . a u

47

Furnware Lighting Product Selection

Leaf DR Linear surface profiles with asymmetrical projection Materials: Aluminium

12V

Finishes: Naturally anodized Light sources: Standard LED module Installation: Surface

LEAF DR is a practical and cutting edge LED fixture with a lot of

Leaf DR

benefits. High quality LED strip light for maximum illumination, a special diffuser to reduce glare, and a multipurpose concealed fixing system which accommodates cabinet side thicknesses of 16mm, 18mm or 19mm. Designed essentially for kitchen cabinet drawers, the LEAF DR projects the light forward into the open drawer. An infrared sensor is integrated into the profile and automatically turns the LEDs on when the drawer is opened. Four popular widths ensure that most drawer cabinets are catered for. LEAF DR is available in the new

© Copyright 2014 All Rights Reserved. Prices & specifications subject to change without notice.

Natural White LED light.

48

F u r n w a r e L i g h t i n g P r o d u c t S e l e c t i o n 2014

Leaf DR

© Copyright 2014 All Rights Reserved. Prices & specifications subject to change without notice.

12V

F re e C a l l 1 8 0 0 1 0 1 0 0 9

Fax 02 9548 6191

E m a i l s a l e s @ f u r n w a re . n e t . a u

We b s i t e w w w. f u r n w a re . n e t . a u

49

Furnware Lighting Product Selection

Leaf DR Housing

AW6060 Aluminium

Diffusers Polycarbonate

12V

Power supply Finishes

Anodised aluminium (ALU)

Colour Appearance

Natural white

Colour Temperature

4000 ÷ 4500 Kelvin

Luminous Efficacy

75 lm/W

Colour Rendering Index

Ra 85

© Copyright 2014 All Rights Reserved. Prices & specifications subject to change without notice.

* Illuminance’s levels of model LEAF 1160mm

50

F u r n w a r e L i g h t i n g P r o d u c t S e l e c t i o n 2014

Concealed Fixing System LEAF DR is installed using an innovative system of brackets which attach to the side panels of the cabinet. Cabinet side panels of 16mm, the external dimensions of the carcase, making

12V

18mm or 19mm can be used without changing the installation fast and simple in a variety of cabinet styles and constructions. The profile of the LEAF DR has an electronic proximity switch that automatically turns the light on when the drawer is opened and turns the light off again when the drawer is shut. The detection range of the switch is up to 10mm.

© Copyright 2014 All Rights Reserved. Prices & specifications subject to change without notice.

Lighting projection outside cabinet

F re e C a l l 1 8 0 0 1 0 1 0 0 9

Fax 02 9548 6191

E m a i l s a l e s @ f u r n w a re . n e t . a u

We b s i t e w w w. f u r n w a re . n e t . a u

51

Furnware Lighting Product Selection

Leaf DR Leaf DR Made in Italy to comply with Australian Standards Designed to illuminate the interior of drawers when opened

12V

Innovative bracket system allows for 16, 18 or 19mm carcase sides Automatically turns on when the drawer is open and turns off when the drawer is closed 12V dc Fitting only. (LED driver must be ordered separately).



Light Colour

Cabinet Width (L) mm

LED’s/Power

Finish

DLDR.450.NW

Natural White

450

21 (1.68W)

ALU

DLDR.600.NW

Natural White

600

30 (2.40W)

ALU

DLDR.900.NW

Natural White

900

48 (3.84W)

ALU

DLDR.1200.NW

Natural White

1200

66 (5.28W)

ALU

© Copyright 2014 All Rights Reserved. Prices & specifications subject to change without notice.

Part No.

52

F u r n w a r e L i g h t i n g P r o d u c t S e l e c t i o n 2014

Extension Cable - MiniPlug

Use for extending cable between LED Driver distribution block, and the light fitting

Part No.

Length (L) m

DEXTMP.1M

1 metre

DEXTMP.2M

2 metre

12V

This cable should be kept to the minimum length possible and must not exceed 6m total length



Distributor Block Extension - MiniPlug Distributor block extension with 12 MiniPlug Sockets Suitable for all 12V dc Domus lights Part No. DMP12.DIS

© Copyright 2014 All Rights Reserved. Prices & specifications subject to change without notice.



12V dc LED Drivers Fully approved to Australian Standards Supplied with 2m lead and plug Supplied with 12 MiniPlug Socket distributor block connected Part No.

Maximum Wattage

DSNP15.12

15W

DSNP30.12

30W

LED Driver Capacity 15W - Suitable for up to 3 lineal metres of Leaf DR 30W - Suitable for up to 6 lineal metres of Leaf DR

F re e C a l l 1 8 0 0 1 0 1 0 0 9

Fax 02 9548 6191

E m a i l s a l e s @ f u r n w a re . n e t . a u

We b s i t e w w w. f u r n w a re . n e t . a u

53

Furnware Lighting Product Selection

Flexyled Flexible linear strip lighting Materials: Flexible strip with adhesive backing

12V

Finishes: Reflecting white Light Sources: Standard module LED Installation: Surface and embedded

FLEXYLED is a highly innovative product in the LED flexible strip

Flexyled CR Modules

market. Two models have been designed with different connection systems to suit a wide variety of situations and installation types. Conceived to allow a universal system of strip lighting without the need of soldering equipment and allowing an IP44 protected strip to be used, FLEXYLED CR incorporates a range of straight line modules with an innovative quick plug system. This allows modules of different

Flexyled CR Corner Modules

lengths and 90° corners to be joined together in various ways to suit virtually any situation. This connection system ensures a consistency in the spacing between the individual LED chips, even at the joins and thus keeps the light projection consistent and without shadow areas. The LED modules are available in four different lengths and can be cut every 50mm allowing each individual installation to be custom built. FLEXYLED CH is designed to connect various lengths of LED strip

Flexyled CR Cables

light together with an innovative solderless clip system. 25 and 5 metre rolls of IP20 LED strip light are simply cut to length and

The FLEXYLED LED chip is extremely high performance, with 87 lumens per watt and is available in two colour temperatures, Warm White, and the new Natural White. All FLEXYLED strip lighting has a highly reflective white backing and 3M self-adhesive backing

Flexyled CH Rolls

tape for fast installation on virtually any smooth surface. FLEXYLED is the ideal companion for use with Domus aluminium profiles and is fully compatible with all Domus 12v DC sensor switches and power supplies.

Flexyled CH Cables

54

F u r n w a r e L i g h t i n g P r o d u c t S e l e c t i o n 2014

© Copyright 2014 All Rights Reserved. Prices & specifications subject to change without notice.

clipped together to complete the installation.

Flexyled

© Copyright 2014 All Rights Reserved. Prices & specifications subject to change without notice.

12V

F re e C a l l 1 8 0 0 1 0 1 0 0 9

Fax 02 9548 6191

E m a i l s a l e s @ f u r n w a re . n e t . a u

We b s i t e w w w. f u r n w a re . n e t . a u

55

Furnware Lighting Product Selection

Flexyled CR Housing

Technopolymer

Diffusers

Methacrylate with multi-optics

12V

Power supply Finishes

White (WH)

Colour Appearance

Natural white

Colour Temperature

4250 ÷ 4600 Kelvin

Luminous Efficacy

87 lm/W

Colour Rendering Index

Ra 70

Colour Appearance

Warm white

Colour Temperature

3000 ÷ 3500 Kelvin

Luminous Efficacy

87 lm/W

Colour Rendering Index

Ra 70

* Illuminance’s levels of model FLEXYLED CR 1000mm

Definition of International Protection (IP) Code The IP coding system is an international coding system used to indicate the degree of protection afforded by an item against access to hazardous parts, penetration of solid foreign objects and ingress of water. IP44 = Protected against solid foreign objects greater than 1mm. Protected against splashes of water from any direction. IP20 = Protected against solid foreign objects greater than 12.5mm (e.g. fingers). Not protected against ingress of water.

56

F u r n w a r e L i g h t i n g P r o d u c t S e l e c t i o n 2014

© Copyright 2014 All Rights Reserved. Prices & specifications subject to change without notice.

* Illuminance’s levels of model FLEXYLED CR 1000mm

Flexyled CR Continuous Line Modules Installation

connection in a continuous line that can be a

12V

Four different sized modules are available for maximum of 6 metres long. All modules can be cut to lengths of 50mm increments without affecting the performance of the LEDs. All modules are equipped with micro CR connectors.

Power Supply Cord

The 2 metre power supply cord is sold separately and is required to connect power from the transformer to the FLEXYLED CR modules. One power supply cord is necessary for each individual run of FLEXYLED CR. The power supply cable is fitted with CR and MiniPlug Connectors.

FLEXYLED CR can be easily cut to lengths of 50mm increments. This allows individual installations to be customised. 90° corners are made simple with FLEXYLED CR corner modules. Available in both left and right hand versions, these corner modules are fitted with micro CR connectors which ensure a consistent gap between LEDs and therefore an even light © Copyright 2014 All Rights Reserved. Prices & specifications subject to change without notice.

flow. This eliminates the shadow areas produced by other methods of running LED strip lighting around corners. Highly resistant double sided adhesive backing strip provides fast and simple installation without the need for tools. The highly transparent resin coating on all FLEXYLED CR modules protects the LEDs against moderate mechanical shock and provides a protection rating of IP44. This allows the FLEXYLED CR to withstand splashes of water from any direction.

Interconnecting Cable

3 lengths of interconnecting cables are available to allow for breaks in the lighting stream, without having to run an additional power supply cable, for example installing FLEXYLED CR either side of a range hood. Interconnecting cables are fitted with CR connectors.

F re e C a l l 1 8 0 0 1 0 1 0 0 9

Fax 02 9548 6191

E m a i l s a l e s @ f u r n w a re . n e t . a u

We b s i t e w w w. f u r n w a re . n e t . a u

57

Furnware Lighting Product Selection

Flexyled CR Flexyled CR Modules Made in Italy to comply with Australian Standards Can be cut to lengths of 50mm increments

12V

Maximum 6 lineal metres in one run 60 LED’s per metre 12 Volt 4.8W per metre A separate power supply cable MUST be ordered for every unbroken run of FLEXYLED CR modules. (See page 61). LED strip only. Power supply cable must be ordered separately. (See page 61). Part No.

Light Colour

Length mm

LED’s (Watt)

DFLEXCR.250.WW

Warm White

250

15 (1.20W)

DFLEXCR.500.WW

Warm White

500

30 (2.40W)

DFLEXCR.1000.WW

Warm White

1000

60 (4.80W)

DFLEXCR.2000.WW

Warm White

2000

120 (9.6W)

DFLEXCR.250.NW

Natural White

250

15 (1.20W)

DFLEXCR.500.NW

Natural White

500

30 (2.40W)

DFLEXCR.1000.NW

Natural White

1000

60 (4.80W)

DFLEXCR.2000.NW

Natural White

2000

120 (9.6W)



Flexyled CR - Interconnecting Cable Connects between 2 lengths of Flexyled CR Strip

Part No.

Length (L) mm

DFLEXCR.IC.250

250

DFLEXCR.IC.500

500

DFLEXCR.IC.1000

1000



58

F u r n w a r e L i g h t i n g P r o d u c t S e l e c t i o n 2014

© Copyright 2014 All Rights Reserved. Prices & specifications subject to change without notice.

CR Connectors

Flexyled CR Corner Modules - Right Made in Italy to comply with Australian Standards 6 LED’s. Ensures consistant LED spacing at corners Suitable for 90° corners in the horizontal plane.

12V

12 Volt 0.48W Compatible with the Flexyled CR Modules (above) A separate power supply cable MUST be ordered for every unbroken run of FLEXYLED CR modules. (See page 61). LED strip only. Power supply cable must be ordered separately. (See pg 61). Part No.

Light Colour

DFLEXCR.CNR.R.WW

Warm White

DFLEXCR.CNR.R.NW

Natural White

Direction of power

Power supply end



Flexyled CR Corner Modules - Left Made in Italy to comply with Australian Standards 6 LED’s. Ensures consistant LED spacing at corners Suitable for 90° corners in the horizontal plane. 12 Volt 0.48W Compatible with the Flexyled CR Modules (above) A separate power supply cable MUST be ordered for every unbroken run of FLEXYLED CR modules. (See page 61).

© Copyright 2014 All Rights Reserved. Prices & specifications subject to change without notice.

LED strip only. Power supply cable must be ordered separately. (See pg 61). Part No.

Light Colour

DFLEXCR.CNR.L.WW

Warm White

DFLEXCR.CNR.L.NW

Natural White

Direction of power

Power supply end



F re e C a l l 1 8 0 0 1 0 1 0 0 9

Fax 02 9548 6191

E m a i l s a l e s @ f u r n w a re . n e t . a u

We b s i t e w w w. f u r n w a re . n e t . a u

59

Furnware Lighting Product Selection

Flexyled CR Extension Cable - MiniPlug

Use for extending cable between LED Driver distribution block, and the Flexyled CR - Power Supply Cable

12V

This cable should be kept to the minimum length possible and must not exceed 6m total length Part No.

Length (L) m

DEXTMP.1M

1 metre

DEXTMP.2M

2 metre



Distributor Block Extension - MiniPlug Distributor block extension with 12 MiniPlug Sockets Suitable for all 12V dc Domus lights Part No. DMP12.DIS

© Copyright 2014 All Rights Reserved. Prices & specifications subject to change without notice.



60

F u r n w a r e L i g h t i n g P r o d u c t S e l e c t i o n 2014

Flexyled CR - Power Supply Cable Connects power from LED driver to Flexyled Strip 1 Power supply cable required for each run of Flexyled Strip 2m long with MiniPlug and CR Connectors

12V

A separate power supply cable MUST be ordered for every unbroken run of FLEXYLED CR modules Part No. DFLEXCR.PS 2000





12V dc LED Drivers Fully approved to Australian Standards Supplied with 2m lead and plug Supplied with 12 MiniPlug Socket distributor block connected Part No.

Maximum Wattage

DSNP15.12

15W

LED Driver Capacity

DSNP30.12

30W

DSNP75.12

75W

15W - Suitable for up to 3 lineal metres of Flexyled CR 30W - Suitable for up to 6 lineal metres of Flexyled CR

© Copyright 2014 All Rights Reserved. Prices & specifications subject to change without notice.

75W - Suitable for up to 15 lineal metres of Flexyled CR

F re e C a l l 1 8 0 0 1 0 1 0 0 9

Fax 02 9548 6191

E m a i l s a l e s @ f u r n w a re . n e t . a u

We b s i t e w w w. f u r n w a re . n e t . a u

61

Furnware Lighting Product Selection

Flexyled CH Housing

Flexible Strip

Power supply

12V

Finishes

Definition of International Protection (IP) Code

White (WH)

Colour Appearance

Natural white

Colour Temperature

4250 ÷ 4600 Kelvin

system used to indicate the degree of protection

Luminous Efficacy

87 lm/W

afforded by an item against access to hazardous

Colour Rendering Index

Ra 70

The IP coding system is an international coding

parts, penetration of solid foreign objects and ingress of water. IP44 = Protected against solid foreign objects greater than 1mm. Protected against splashes of water from any direction. IP20 = Protected against solid foreign objects

* Illuminance’s levels of model FLEXYLED CH 1000mm

greater than 12.5mm (e.g. fingers). Colour Appearance

Warm white

Colour Temperature

3000 ÷ 3000 Kelvin

Luminous Efficacy

87 lm/W

Colour Rendering Index

Ra 70

* Illuminance’s levels of model FLEXYLED CH 1000mm

62

F u r n w a r e L i g h t i n g P r o d u c t S e l e c t i o n 2014

© Copyright 2014 All Rights Reserved. Prices & specifications subject to change without notice.

Not protected against ingress of water.

Flexyled CH Continuous Line Installation

A new release from Domus Line is the FLEXYLED CH. An innovative clip system for joining Flexyled strips together to suit any application. Using the FLEXYLED Rolls allows a strip to be constructed in virtually any

12V

20m IP20 Strip and these cutting-edge clips, configuration up to 6m long. Strips longer than 6m will require an additional power supply cable. To use the FLEXYLED CH clips, simply slide the LED strip under the contacts on the clip (making sure to align the + & - markings) and snap the clip closed.

Power Supply Cord

The 2 metre power supply cord is sold separately and is required to connect power from the transformer to the FLEXYLED CH. One power supply cord is necessary for each individual run of FLEXYLED CH. The power supply cable is fitted with CH and MiniPlug Connectors.

FLEXYLED CH can be easily cut to lengths of 50mm increments. This allows individual installations to be customised.

Thanks to an innovative clip system, FLEXYLED CH can be joined quickly and easily without the use of tools.

Highly resistant double sided adhesive backing © Copyright 2014 All Rights Reserved. Prices & specifications subject to change without notice.

strip provides fast and simple installation without the need for tools.

FLEXYLED CH has a protection rating of IP20.

Interconnecting Cable

3 lengths of interconnecting cables are available to allow for breaks and corners in the lighting stream, without having to run an additional power supply cable, for example installing FLEXYLED CH either side of a range hood.

F re e C a l l 1 8 0 0 1 0 1 0 0 9

Fax 02 9548 6191

E m a i l s a l e s @ f u r n w a re . n e t . a u

We b s i t e w w w. f u r n w a re . n e t . a u

63

Furnware Lighting Product Selection

Flexyled CH - Rolls Flexyled CH - Rolls Can be cut every 50mm (3 LEDs) 12 Volt 4.8W/metre, 60 LEDs per metre

12V

Maximum 6 metres in one strip length LED strip only. Use FLEXYLED CH clips for connections Part No.

Light Colour

Roll Length m

DFLEX.20B.WW

Warm White

20

DFLEX.20B.NW

Natural White

20

DFLEX.05B.WW

Warm White

5

DFLEX.05B.NW

Natural White

5



Flexyled CH - Power Supply Cable Connects power from LED driver to FLEXYLED CH Strip 1 Power supply cable required for each run of FLEXYLED CH Strip (maximum length of FLEXYLED CH Strip is 6m) 2m long cable with Miniplug and CH clips connectors Part No. DFLEXCH.PS



Flexyled CH - Connecting Clip Connects 2 lengths of FLEXYLED CH Strip

Part No. DFLEXCH.CC



Flexyled CH - Interconnecting Cable Connects 2 lengths of FLEXYLED CH Strip via a wire Allow for corners, gaps etc. Ensure correct polarity is observed Part No.

Length mm

DFLEXCH.IC.50

50

DFLEXCH.IC.100

100



64

F u r n w a r e L i g h t i n g P r o d u c t S e l e c t i o n 2014

© Copyright 2014 All Rights Reserved. Prices & specifications subject to change without notice.

Ensure correct polarity is observed

Flexyled CH Extension Cable - MiniPlug

Use for extending cable between LED Driver distribution block, and the light fitting

Part No.

Length (L) m

DEXTMP.1M

1 metre

DEXTMP.2M

2 metre

12V

This cable should be kept to the minimum length possible and must not exceed 6m total length



Distributor Block Extension - MiniPlug Distributor block extension with 12 MiniPlug Sockets Suitable for all 12V dc Domus lights Part No. DMP12.DIS

© Copyright 2014 All Rights Reserved. Prices & specifications subject to change without notice.



12V dc LED Drivers Fully approved to Australian Standards Supplied with 2m lead and plug Supplied with 12 MiniPlug Socket distributor block connected Part No.

Maximum Wattage

DSNP15.12

15W

LED Driver Capacity

DSNP30.12

30W

DSNP75.12

75W

15W - Suitable for up to 3 lineal metres of Flexyled CH 30W - Suitable for up to 6 lineal metres of Flexyled CH 75W - Suitable for up to 15 lineal metres of Flexyled CH

F re e C a l l 1 8 0 0 1 0 1 0 0 9

Fax 02 9548 6191

E m a i l s a l e s @ f u r n w a re . n e t . a u

We b s i t e w w w. f u r n w a re . n e t . a u

65

Furnware Lighting Product Selection

Flexyled RGB

(Colour Changing) Flexible linear modules Materials: Flexible strip with adhesive backing

12V

Finishes: Reflecting white Light Sources: RGB LED Installation: Surface and embedded

FLEXYLED RGB has been developed using Domus Line’s superior

Flexyled RGB Modules

RGB LED technology. Colour changing sequences have never been easier with the availability of remote control units which allows for various pre-set colour mixing patterns or solid colours covering a wide spectrum. This makes it possible to personalise a lighting installation to suit various moods and to individually match or compliment any décor. FLEXYLED RGB has been designed to incorporate a special quick connect Micro RGB connector system which eliminates the

Flexyled RGB Corner Modules

need for time consuming and messy soldered connections. This connection system ensures a uniform and consistent spacing between the individual LED chips, thus eliminating shadow areas and bright spots caused by uneven joints in the LED strip. The FLEXYLED RGB modules are available in four lengths, which can all be cut to length in 75mm increments, and 90° corners are also available to continue the smooth light flow even at the corners. High quality 3M self-adhesive backing tape and interconnecting cables make the FLEXYLED RGB

Flexyled RGB Cables

66

F u r n w a r e L i g h t i n g P r o d u c t S e l e c t i o n 2014

both easy and quick to install.

© Copyright 2014 All Rights Reserved. Prices & specifications subject to change without notice.

Flexyled RGB Sequencer & Controller

Flexyled RGB

© Copyright 2014 All Rights Reserved. Prices & specifications subject to change without notice.

12V

F re e C a l l 1 8 0 0 1 0 1 0 0 9

Fax 02 9548 6191

E m a i l s a l e s @ f u r n w a re . n e t . a u

We b s i t e w w w. f u r n w a re . n e t . a u

67

Furnware Lighting Product Selection

(Colour Changing)

- Layout Map

12V

Flexyled RGB

LED Driver

© Copyright 2014 All Rights Reserved. Prices & specifications subject to change without notice.

Power Supply Cable

68

F u r n w a r e L i g h t i n g P r o d u c t S e l e c t i o n 2014

Flexyled RGB

(Colour Changing)

Flexyled RGB Continuous Line Modules

12V

Four different sized modules are available for connection in a continuous line that can be a maximum of 5 metres long. All modules can be cut to lengths of 75mm increments without affecting the performance of the LEDs. All modules are equipped with Micro RGB connectors.

The 2 metre power supply cord is sold separately and is required to connect power from the transformer to the FLEXYLED RGB modules. One power supply cord is necessary for each individual run of FLEXYLED RGB. The power supply cable is fitted with Micro RGB and MultiPlug connectors.

Power Supply Cord

FLEXYLED RGB can be easily cut to lengths of 75mm increments. This allows individual installations to be customised.

© Copyright 2014 All Rights Reserved. Prices & specifications subject to change without notice.

90° corners are made simple with FLEXYLED RGB corner modules. Available in both left and right hand versions, these corner modules are fitted with Micro RGB connectors which ensure a consistent gap between LEDs and therefore an even light flow. This eliminates the shadow areas produced by other methods of running LED strip lighting around corners. Highly resistant double sided adhesive backing strip provides fast and simple installation without the need for tools. The highly transparent resin coating on all FLEXYLED RGB modules protects the LEDs against moderate mechanical shock and provides a protection rating of IP44. This allows the FLEXYLED RGB to withstand splashes of water from any direction.

Interconnecting Cable 3 lengths of interconnecting cables are available to allow for breaks in the lighting stream, without having to run an additional power supply cable, for example installing FLEXYLED RGB either side of a range hood. Interconnecting cables are fitted with Micro RGB connectors.

F re e C a l l 1 8 0 0 1 0 1 0 0 9

Fax 02 9548 6191

E m a i l s a l e s @ f u r n w a re . n e t . a u

We b s i t e w w w. f u r n w a re . n e t . a u

69

Furnware Lighting Product Selection

Flexyled RGB

(Colour Changing) Flexyled RGB Modules Made in Italy to comply with Australian Standards Can be cut to lengths of 75mm increments

12V

Maximum 5 lineal metres in one run 40 RGB LED’s per metre 12 Volt 9.6W per metre A separate power supply cable MUST be ordered for every unbroken run of FLEXYLED RGB modules. (See page 73).

LED module strip only. Power supply cable must be ordered separately (See page 69).

Part No.

Length (L) mm

LED’s (Watt)

DFLEXCR.150.RGB

150

6 (1.44W)

DFLEXCR.300.RGB

300

12 (2.88W)

DFLEXCR.600.RGB

600

24 (5.76W)

DFLEXCR.1800.RGB

1800

72 (17.28W)



Flexyled RGB Cables - Interconnecting Cable Made in Italy to comply with Australian Standards Connects between 2 lengths of Flexyled RGB Module

Part No.

Length (L) mm

DFLEXCR.IC.100.RGB

100

DFLEXCR.IC.500.RGB

500



70

F u r n w a r e L i g h t i n g P r o d u c t S e l e c t i o n 2014

© Copyright 2014 All Rights Reserved. Prices & specifications subject to change without notice.

MultiPlug Connectors

Flexyled RGB

(Colour Changing)

Flexyled RGB Corner - Right Made in Italy to comply with Australian Standards 3 LED’s. Keeps LED spacing consistent at corners Suitable for 90° corners in the horizontal plane.

12V

12 Volt 0.72W Compatible with the Flexyled RGB Modules (above) A separate power supply cable MUST be ordered for every unbroken run of FLEXYLED RGB modules. (See page 73).

LED module strip only. Power supply cable must be ordered separately (See page 69).

Part No.

Direction of power

DFLEXCR.CNR.R.RGB Power supply end



Flexyled RGB Corner - Left Made in Italy to comply with Australian Standards 3 LED’s. Keeps LED spacing consistent at corners Suitable for 90° corners in the horizontal plane. 12 Volt 0.72W Compatible with the Flexyled RGB Modules (above) A separate power supply cable MUST be ordered for every unbroken run of FLEXYLED RGB modules. (See page 73).

LED module strip only. Power supply cable must be ordered separately (See page 69).

© Copyright 2014 All Rights Reserved. Prices & specifications subject to change without notice.

Part No.

Direction of power

DFLEXCR.CNR.L.RGB

Power supply end



F re e C a l l 1 8 0 0 1 0 1 0 0 9

Fax 02 9548 6191

E m a i l s a l e s @ f u r n w a re . n e t . a u

We b s i t e w w w. f u r n w a re . n e t . a u

71

Furnware Lighting Product Selection

Flexyled RGB

(Colour Changing) Flexyled RGB Sequencer & Remote Controller Sequencer/Driver to operate Flexyled RGB 12 Volt maximum 144W

12V

Remote can control multiple sequencers Not synchronisable in multi sequencer installations Requires 12V dc LED driver as power supply. (See page 73). Part No. DFLEXCR.SEQ.RGB

© Copyright 2014 All Rights Reserved. Prices & specifications subject to change without notice.



72

F u r n w a r e L i g h t i n g P r o d u c t S e l e c t i o n 2014

Flexyled RGB

(Colour Changing)

Flexyled RGB Cables - Power Supply Connects power from Flexyled RGB Sequencer to Flexyled RGB Modules 1 Power supply cable required for each run of Flexyled RGB Strip 2m long with MultiPlug and Micro RGB connectors

12V

A separate power supply cable MUST be ordered for every unbroken run of FLEXYLED RGB modules Part No. DFLEXCR.PS.RGB

2000



12V dc LED Drivers Fully approved to Australian Standards Supplied with 2m lead and plug Supplied with 12 MiniPlug Socket distributor block connected Part No.

Maximum Wattage

DSNP15.12

15W

LED Driver Capacity

DSNP30.12

30W

DSNP75.12

75W

15W - Suitable for up to 1.2 lineal metres of Flexyled RGB 30W - Suitable for up to 3 lineal metres of Flexyled RGB

© Copyright 2014 All Rights Reserved. Prices & specifications subject to change without notice.

75W - Suitable for up to 7.5 lineal metres of Flexyled RGB

F re e C a l l 1 8 0 0 1 0 1 0 0 9

Fax 02 9548 6191

E m a i l s a l e s @ f u r n w a re . n e t . a u

We b s i t e w w w. f u r n w a re . n e t . a u

73

Furnware Lighting Product Selection

Profile Collection Linear recessed and surface mounted profiles with symmetrical projection Materials: Aluminium with polycarbonate diffuser

12V

Finishes: Naturally anodized Light Sources: FLEXYLED CR Installation: Milled groove or surface with concealed clips

DOMUS Line’s PROFILE collection comprises a range of 4 different

Diva

profiles which can easily be cut to length to suit any application. The FLEXYLED range used as a light source, along with end-caps and concealed fixing clips combine to create a rage of stylish linear lighting which is truly versatile. Sensor switches and dimmers are also available in versions to match both the DIVA and TWIG profiles. (See SENSOR collection pages 96-99).

Twig

Toucan

74

F u r n w a r e L i g h t i n g P r o d u c t S e l e c t i o n 2014

© Copyright 2014 All Rights Reserved. Prices & specifications subject to change without notice.

String

Profile Collection

© Copyright 2014 All Rights Reserved. Prices & specifications subject to change without notice.

12V

Diva

String

Toucan

Twig

F re e C a l l 1 8 0 0 1 0 1 0 0 9

Fax 02 9548 6191

E m a i l s a l e s @ f u r n w a re . n e t . a u

We b s i t e w w w. f u r n w a re . n e t . a u

75

Furnware Lighting Product Selection

Profile Collection Diva Made in Italy to comply with Australian Standards Recessed type profile only (light source must be ordered separately. See page 58).

12V

Supplied in 3 metre lengths only Can be easily cut to length

FLEXYLED CR can be used as a light source. Strip modules, corners and connectors all fit within the profile Part No.

Description

Finish

A DDP.3M

Profile 3 metre

ALU

B DSL.DP

Diffuser 3 metre

TR

C DDP.EC

End cap

GY

DIVA is installed via recessed mounting, into a slot with a depth of 12mm and a width of 14.5mm. The front edges protrude slightly to cleverly conceal the edges of the recess, giving a clean finish.

Stopped groove installation

Through groove installation

Twig Made in Italy to comply with Australian Standards Surface Mount type profile only (light source must be ordered separately. See page 58). Can be easily cut to length

FLEXYLED CR can be used as a light source. Strip modules, corners and connectors all fit within the profile Part No.

Description

Finish

A DTP.3M

Profile 3 metre

ALU

B DSL.DP

Diffuser 3 metre

TR

C DTP.EC

End cap

GY

D DTP.MC

Fixing Clip

-

TWIG is installed on the supporting surface with the help of concealed clips.

Surface mounted installation

76

F u r n w a r e L i g h t i n g P r o d u c t S e l e c t i o n 2014

© Copyright 2014 All Rights Reserved. Prices & specifications subject to change without notice.

Supplied in 3 metre lengths only

String Made in Italy to comply with Australian Standards Recessed type Diffuser profile only (light source must be ordered separately. See page 58).

12V

Supplied in 3 metre lengths only Can be easily cut to length Aluminium strip clips into the back of the diffuser profile. Suitable light source can then be fed into the gap between the Aluminium strip and the diffuser. Diffuser profile can then be pushed into the pre-cut groove.

FLEXYLED CR can be used as a light source. Strip modules, corners and connectors all fit within the profile Part No.

Description

Finish

A DST.DP

Diffuser profile 3 metre

TR

B DST.BP

Aluminium strip 3 metre

ALU

STRING is flush installed in through milled

B

grooves that is only 9mm deep and 12mm wide. The milled projection profile of 9

only 0.8mm, allows it to be installed without further machining, even on the sides of cabinets and hanging kitchen cupboards fitted with shelves.

A

Toucan Made in Italy to comply with Australian Standards ABS Plastic profile only (light source must be ordered separately. See page 58). © Copyright 2014 All Rights Reserved. Prices & specifications subject to change without notice.

Suits 6 - 8mm glass shelves Supplied in 2 metre lengths only Aluminium coloured finish Can be easily cut to length

FLEXYLED CR can be used as a light source. Strip modules, corners and connectors all fit within the profile Part No.

Description

Finish

A DTN.2000

Profile 2 metre

ALU

B DTN.LS

LED Support 1 metre

ALU

A

B

TOUCAN is installed using pressure to attach it to 6mm and 8mm shelves. Applied to frosted glass shelves, it creates a lighting effect diffused across the entire surface. Applied to transparent glass shelves, it lights the front edge. LED strip with IP44 protection is highly recommended.

F re e C a l l 1 8 0 0 1 0 1 0 0 9

Fax 02 9548 6191

E m a i l s a l e s @ f u r n w a re . n e t . a u

We b s i t e w w w. f u r n w a re . n e t . a u

77

Furnware Lighting Product Selection

Skyline Architectural fixtures for accent lighting Materials: Aluminium

12V

Finishes: Naturally anodized Light sources: Standard LED module Installation: To be integrated in milled groove Design patent pending SKYLINE is both a profile for the bottom of handleless wall cabinets

Skyline TLDM

and a LED light profile. Integrating seamlessly into cabinets with a bottom panel thickness of 18mm and side panel thickness of 16mm, this innovative profile is available in four popular lengths to suit most top cupboard applications. An innovative clip fastening system allows for easy installation and maintenance of the SKYLINE profile even after the cabinets have been installed. Fitted with the high quality LED strip FLEXYLED CR, the SKYLINE profile is a perfect companion

Skyline Profile

to kickboard and under bench strip lighting. The SKYLINE TLDM profile includes the option of an integrated multi-function TouchLED dimmer switch for under cabinet applications. The TouchLED switch incorporates a master dimmer which simultaneously controls all other SKYLINE profiles or LED ‘slave’ lights connected to it. The SKYLINE profile is patented. SKYLINE profile is supplied in 2m lengths ready for your custom

© Copyright 2014 All Rights Reserved. Prices & specifications subject to change without notice.

length requirements.

78

F u r n w a r e L i g h t i n g P r o d u c t S e l e c t i o n 2014

Skyline

© Copyright 2014 All Rights Reserved. Prices & specifications subject to change without notice.

12V

F re e C a l l 1 8 0 0 1 0 1 0 0 9

Fax 02 9548 6191

E m a i l s a l e s @ f u r n w a re . n e t . a u

We b s i t e w w w. f u r n w a re . n e t . a u

79

Furnware Lighting Product Selection

Skyline Housing

AW6060 Aluminium

Diffusers Polycarbonate

12V

Power supply Finishes

Anodised aluminium (ALU)

TouchLED TLD Sensor Operation Colour Appearance

Natural white

Colour Temperature

4000 ÷ 4500 Kelvin

this innovative device into many of their latest

Luminous Efficacy

75 lm/W

lighting designs. This multi-function switch

Colour Rendering Index

Ra 85

Domus Line have perfected the TLD Sensor ‘TouchLED’ dimmer switch and incorporated

also has been added to the ‘master and slave’ lighting system in some devices. The switching on/off of the devices connected to the TLD Sensor is carried out with the single touch of the LED on the TLD Sensor. It is possible to adjust the intensity of the light by holding a finger on the LED. A brief flash of the LED indicates that maximum brightness

* Illuminance’s levels of model SKYLINE 1163mm

has been reached. The brightness level will be memorized until the next adjustment. The TLD Sensor also integrates a ‘night-light’ function which activates only when the devices are switched off. In a daylight or bright environment, the LED on the TLD Sensor glows brightness of the LED increases providing a handy ‘night-light’ function. The ‘night-light’ function can be activated or deactivated by holding a finger on the TLD Sensor for 15 seconds after which, the deactivation of the function will be notified by 2 slow flashes of the LED, or its activation by 3 fast flashes. The TLD Sensor is fitted with a safety program that turns off all connected devices after 18 hours of continuous operation. A further feature of the TLD Sensor is ‘auto-on’ that automatically turns on the connected LED fittings at the previously set luminosity. This function is especially useful for the automatic turning on of a collection of Lights for example in a show room. When the main light switches are turned on, the detail lighting will activate at their various pre-set brightness without having to adjust all the levels individually.

80

F u r n w a r e L i g h t i n g P r o d u c t S e l e c t i o n 2014

© Copyright 2014 All Rights Reserved. Prices & specifications subject to change without notice.

with a soft dim light. With low or no light, the

SKYLINE Installation Details SKYLINE is installed on the bottom panel of wall cabinets. The bottom panel is cut back 10-15mm deep to accept the fixing profile. The power cord which is 4 metres long

12V

by at least 24mm and slotted 3.8mm wide and

(for TLDM) and equipped with MiniPlug Connectors can be run either through a central hole of at least 10mm diameter or a groove only 2mm x 4mm in the end of the bottom panel. SKYLINE is designed for cabinets with a bottom panel thickness of 18mm and carcase side thickness of 16mm.

Groove for lateral side cable exit

Innovative Fixing System SKYLINE has a concealed fixing system where the base profile is inserted into the pre-prepared groove and the lighting profile simply clips onto the base. This allows for fast installation and easy removal in the rare event

© Copyright 2014 All Rights Reserved. Prices & specifications subject to change without notice.

that this becomes necessary.

Master and Slave System – Set-up example

SKYLINE profile is available in 2 versions; SKYLINE TLDM – Master or SKYLINE profile. SKYLINE TLDM incorporates a multi-function TouchLED dimmer switch that can be used as a single LED fitting, or can be used as a master control for other LED fittings. This feature simultaneously controls all ‘slave’ fittings connected to it. The output cable of the SKYLINE TLDM can supply up to a maximum of 30W @ 12V dc including the load of the master fitting. One SKYLINE TLDM can control up to a total of 6 lineal metres of SKYLINE profile. Please ensure power supply has sufficient capacity to supply all the light fittings.

F re e C a l l 1 8 0 0 1 0 1 0 0 9

Fax 02 9548 6191

E m a i l s a l e s @ f u r n w a re . n e t . a u

We b s i t e w w w. f u r n w a re . n e t . a u

81

Furnware Lighting Product Selection

Skyline Skyline TLDM - Master Made in Italy to comply with Australian Standards Integrated master touch dimmer switch with night light feature (maximum load 30W)

12V

Can be used as a stand alone unit Combined Handle/Striplight profile for top cupboards 12 Volt, 4.75W per metre 4m cable with MiniPlug Connectors Fitting only (LED driver must be ordered separately)

Part No.

Light Colour

Cabinet Width mm

Power

Finish

DSKYMST.417.NW

Natural White

450

1.92W

ALU

DSKYMST.567.NW

Natural White

600

2.64W

ALU

DSKYMST.867.NW

Natural White

900

4.08W

ALU

DSKYMST.1167.NW

Natural White

1200

5.52W

ALU

Skyline - Profile Made in Italy to comply with Australian Standards Aluminium Profile only. (No light source included. Suitable light source such as FLEXYLED CR must be purchase separately. See page 58). Back profile not necessary for entire length of front profile Diffuser profile is compatible with DIVA and TWIG profiles

82

Part No.

Description

Length m

Finish

DSKYF.2000

Front Profile

2

ALU

DSKYB.2000

Back Profile

2

ALU

DSL.DP

Diffuser Profile

3

TR

DSKY.MC

Fixing Clip

(pack of 4 pieces)

-

F u r n w a r e L i g h t i n g P r o d u c t S e l e c t i o n 2014

© Copyright 2014 All Rights Reserved. Prices & specifications subject to change without notice.

Fixing clips are recommended at least 4pcs per metre of SKYLINE profile

Extension Cable - MiniPlug

Use for extending cable between LED Driver distribution block, and the light fitting

Part No.

Length (L) m

DEXTMP.1M

1 metre

DEXTMP.2M

2 metre

12V

This cable should be kept to the minimum length possible and must not exceed 6m total length



Distributor Block Extension - MiniPlug Distributor block extension with 12 MiniPlug Sockets Suitable for all 12V dc Domus lights Part No. DMP12.DIS

© Copyright 2014 All Rights Reserved. Prices & specifications subject to change without notice.



12V dc LED Drivers Fully approved to Australian Standards Supplied with 2m lead and plug Supplied with 12 MiniPlug Socket distributor block connected Part No.

Maximum Wattage

DSNP15.12

15W

LED Driver Capacity

DSNP30.12

30W

DSNP75.12

75W

15W - Suitable for up to 3 lineal metres of Skyline 30W - Suitable for up to 6 lineal metres of Skyline 75W - Suitable for up to 15 lineal metres of Skyline Note: Skyline TLDM maximum load is 30W

F re e C a l l 1 8 0 0 1 0 1 0 0 9

Fax 02 9548 6191

E m a i l s a l e s @ f u r n w a re . n e t . a u

We b s i t e w w w. f u r n w a re . n e t . a u

83

Furnware Lighting Product Selection

Goccia Profile Design Giuseppe Bavuso 2011 Architectural fixtures with symmetrical projection

12V

Materials: Aluminium Finishes: Naturally anodized Light sources: Flexyled CR (must be ordered separately) Installation: Lying flat Design patent pending GOCCIA is both a wardrobe hanging rod and an illumination profile. The collection, designed by renowned Italian designer Giuseppe

Goccia Profile C E

Bavuso, is a balance of performance and aesthetic features. The minimal design concentrates on the contemporary and on purity of shapes that are inspired from water as a primary element of nature. The end pillars and the housing for the LED strip have had particular

OA

attention paid to their design details. The GOCCIA fixture is also equipped with a transparent PVC profile on which the clothes hanger rests eliminating direct mechanical shock on the aluminium profile. GOCCIA is designed to be installed in wardrobes but it can also be installed under shelves in walk-in closets. GOCCIA is supplied as an extrusion which can be cut to length and fitted with your favourite LED strip lighting such as the FLEXYLED CR range. End pillars are supplied separately and are uniquely designed to allow fast and fool

© Copyright 2014 All Rights Reserved. Prices & specifications subject to change without notice.

proof installation of the wiring. Design patents pending.

84

F u r n w a r e L i g h t i n g P r o d u c t S e l e c t i o n 2014

Goccia Profile

© Copyright 2014 All Rights Reserved. Prices & specifications subject to change without notice.

12V

F re e C a l l 1 8 0 0 1 0 1 0 0 9

Fax 02 9548 6191

E m a i l s a l e s @ f u r n w a re . n e t . a u

We b s i t e w w w. f u r n w a re . n e t . a u

85

Furnware Lighting Product Selection

Goccia Profile Housing

AW6060 Aluminium

Diffusers Polycarbonate (when using Flexyled CR)

12V

Power supply Finishes



Anodized Aluminium (ALU)

Colour Appearance

Natural white

Colour Temperature

4000 ÷ 4500 Kelvin

Luminous Efficacy

120 lm/W

Colour Rendering Index

Ra 70

* Illuminance’s levels of model FLEXYLED CR 1000mm

© Copyright 2014 All Rights Reserved. Prices & specifications subject to change without notice.

Details shown for Flexyled CR

86

F u r n w a r e L i g h t i n g P r o d u c t S e l e c t i o n 2014

Installation GOCCIA is installed hanging vertically and anchored to the shelf with metric machine FLEXYLED CR as a light source, the power supply cord can be run through the shelf

12V

screws through the shelf. When using

through a hole with a diameter of at least 8mm. The cap of the lateral heads can be removed to allow easy positioning of the cable. The overall idea of the collection has been aimed towards the most common wardrobes with hinged, sliding or coplanar doors. Profile 2m (DGC.2M.ALU) End Pillars (pair) (DGC.EP.ALU) Diffuser 2m (DGC.DP.TR) Hanger Protection Strip (DGC.HP.CL)

Weight Carrying Capacity GOCCIA has a load rating of approximately 15kg per lineal metre, dependant on the security and stability of the surface that it is fixed to.

C

Extrusion Cutting Information

© Copyright 2014 All Rights Reserved. Prices & specifications subject to change without notice.

Extrusion length (E) = Overall length (OA) – 44mm E

Extrusion length (E) = Centres (C) – 8mm

OA

F re e C a l l 1 8 0 0 1 0 1 0 0 9

Fax 02 9548 6191

E m a i l s a l e s @ f u r n w a re . n e t . a u

We b s i t e w w w. f u r n w a re . n e t . a u

87

Furnware Lighting Product Selection

Goccia Profile Goccia Profile

12V

Made in Italy to comply with Australian Standards Illuminated hanging rail profile. (Profile only, light source must be ordered separately. Use Flexyled CR.) End pillars fix through the shelf with M6 bolts Can be cut to the length required Plastic strip on top of profile to reduce scratching from coat hangers Ends caps easily removeable to allow for insertion of LED strip and cables Maximum load 15kg per metre

C E

Part No.

Description

Finish

DGC.2M

Profile 2 metre

ALU

DGC.DP

Diffuser 2 metre

TR

DGC.HP

Hanger Protection Strip 2 metre

CL

DGC.EP

End pillars (pair)

ALU

OA

E = OA - 44mm E = C - 8mm

Flexyled CR Modules Made in Italy to comply with Australian Standards Can be cut to lengths of 50mm increments Maximum 6 lineal metres in one run 60 LED’s per metre 12 Volt 4.8W per metre A separate power supply cable MUST be ordered for every unbroken run of FLEXYLED CR modules. (See below). Part No.

Light Colour

Length mm

LED’s (Watt)

DFLEXCR.250.WW

Warm White

250

15 (1.20W)

DFLEXCR.500.WW

Warm White

500

30 (2.40W)

DFLEXCR.1000.WW

Warm White

1000

60 (4.80W)

DFLEXCR.2000.WW

Warm White

2000

120 (9.6W)

DFLEXCR.250.NW

Natural White

250

15 (1.20W)

DFLEXCR.500.NW

Natural White

500

30 (2.40W)

DFLEXCR.1000.NW

Natural White

1000

60 (4.80W)

DFLEXCR.2000.NW

Natural White

2000

120 (9.6W)

For a full range of FLEXYLED CR please see pg 56



Flexyled CR - Power Supply Cable Connects power from LED driver to Flexyled Strip 1 Power supply cable required for each run of Flexyled Strip 2m long with MiniPlug and CR Connectors Part No. DFLEXCR.PS 2000

88

F u r n w a r e L i g h t i n g P r o d u c t S e l e c t i o n 2014





© Copyright 2014 All Rights Reserved. Prices & specifications subject to change without notice.

LED strip only. Power supply cable must be ordered separately. (See below).

Extension Cable - MiniPlug

Use for extending cable between LED Driver distribution block, and the light fitting

Part No.

Length (L) m

DEXTMP.1M

1 metre

DEXTMP.2M

2 metre

12V

This cable should be kept to the minimum length possible and must not exceed 6m total length



Distributor Block Extension - MiniPlug Distributor block extension with 12 MiniPlug Sockets Suitable for all 12V dc Domus lights Part No. DMP12.DIS

© Copyright 2014 All Rights Reserved. Prices & specifications subject to change without notice.



12V dc LED Drivers (when using FLEXYLED CR) Fully approved to Australian Standards Supplied with 2m lead and plug Supplied with 12 MiniPlug Socket distributor block connected Part No.

Maximum Wattage

DSNP15.12

15W

LED Driver Capacity

DSNP30.12

30W

DSNP75.12

75W

15W - Suitable for up to 3 lineal metres of FLEXYLED CR 30W - Suitable for up to 6 lineal metres of FLEXYLED CR 75W - Suitable for up to 15 lineal metres of FLEXYLED CR

F re e C a l l 1 8 0 0 1 0 1 0 0 9

Fax 02 9548 6191

E m a i l s a l e s @ f u r n w a re . n e t . a u

We b s i t e w w w. f u r n w a re . n e t . a u

89

Furnware Lighting Product Selection

IR Sensor IR Sensor is a dual function electronic proximity switch for the control of all DOMUS Line

On-off switch set up (delivered as standard)

Proximity/Door switch set up

12V dc LED lighting. This multi-purpose switch

12V

operates at 12V dc so is therefore safe and easy to install, and can be used as either a non-contact on/off switch or as a door switch. IR Sensor can be either surface mounted or recessed into a 14mm diameter hole. A 2 metre long power cable with MiniPlug Connectors and a distributor block with provision for connection of 11 devices (maximum load is 15W @ 12V dc) are provided as standard. IR Sensor must be connected in line between the power supply and the LED fittings.

Surface installation

Built-in installation

© Copyright 2014 All Rights Reserved. Prices & specifications subject to change without notice.

IR set-up example

90

F u r n w a r e L i g h t i n g P r o d u c t S e l e c t i o n 2014

IR Sensor Operates at 12 Volt Maximum load 15W @12V dc Dual mode, on/off or proximity/door switch

12V

MiniPlug Connectors Supplied with 1 distributor block for connection of up to 11 lights Part No.

Price 5

Price ea

Per

DIR1224

33.50

43.55

ea



Dual Mode Operation The IR MK2 sensor is supplied from the factory in the non-contact on/off switch mode. To turn on/off the switch simply move your hand to within 50mm of the sensor head and the connected load will turn on or off. If the IR MK2 sensor is required to be used as a door switch, hold down the ‘set up switch’ (on the flat side of the sensor body) with a small blunt object. Hold for a minimum of 3 seconds and release. The sensor will now be © Copyright 2014 All Rights Reserved. Prices & specifications subject to change without notice.

in proximity/door mode and can be used as a door switch. The sensor will now turn off the connected load whenever an object (e.g. a door or flap) moves within 50mm of the front of the sensor head, and turn the connected load back on when the object moves away. To change the IR MK2 sensor back to on/off mode hold down the ‘set up switch’ for a minimum of 3 seconds. As IR MK2 is an optical type sensor, for optimum performance avoid the use of bright white, reflective or mirror type objects.

F re e C a l l 1 8 0 0 1 0 1 0 0 9

Fax 02 9548 6191

E m a i l s a l e s @ f u r n w a re . n e t . a u

We b s i t e w w w. f u r n w a re . n e t . a u

91

Furnware Lighting Product Selection

IR MK2 Sensor The all new IR MK2 sensor is a dual mode electronic proximity switch for the control of

On-off switch set up (delivered as standard)

Proximity/Door switch set up

all DOMUS Line 12V dc LED lighting with a

12V

removable sensor head that can be located up to 2m away from the sensor body. This multipurpose switch operates at 12V dc so is therefore safe and easy to install, and can be used as either a non-contact on/off switch or as a door switch. The IR MK2 sensor head is easily recessed into a 13mm diameter hole and has an outside diameter of only 14mm. A 2 metre long power cable with

Move your hand not less than 50mm from the sensor

MiniPlug connectors and a distributor block with provision for connection of 11 devices (maximum load is 15W @ 12V dc) are provided as standard. IR MK2 must be connected in line between the

IR set-up example

© Copyright 2014 All Rights Reserved. Prices & specifications subject to change without notice.

power supply and the LED fittings.

92

F u r n w a r e L i g h t i n g P r o d u c t S e l e c t i o n 2014

IR MK2 Sensor Operates at 12 Volt Maximum load 15W @12V dc Dual mode, on/off or proximity/door switch

12V

Removable sensor head with 2m cable MiniPlug Connectors Supplied with 1 distributor block for connection of up to 11 lights Part No.

Price 5

Price ea

Per

DIRMK2.12

31.80

41.34

ea



Dual Mode Operation

The IR MK2 sensor is supplied from the factory in the non-contact on/off switch mode. To turn on/off the switch simply move your hand to within 50mm of the sensor head and the connected load will turn on or off. © Copyright 2014 All Rights Reserved. Prices & specifications subject to change without notice.

If the IR MK2 sensor is required to be used as a door switch, hold down the ‘set up switch’ (on the flat side of the sensor body) with a small blunt object. Hold for a minimum of 3 seconds and release. The sensor will now be in proximity/door mode and can be used as a door switch. The sensor will now turn off the connected load whenever an object (e.g. a door or flap) moves within 50mm of the front of the sensor head, and turn the connected load back on when the object moves away. To change the IR MK2 sensor back to on/off mode hold down the ‘set up switch’ for a minimum of 3 seconds. As IR MK2 is an optical type sensor, for optimum performance avoid the use of bright white, reflective or mirror type objects.

F re e C a l l 1 8 0 0 1 0 1 0 0 9

Fax 02 9548 6191

E m a i l s a l e s @ f u r n w a re . n e t . a u

We b s i t e w w w. f u r n w a re . n e t . a u

93

Furnware Lighting Product Selection

Capsens V13 Sensor CAPSENS V13 is a new cutting edge electronic capacitive sensor designed to be totally concealed behind most non-metallic materials

12V

including wood, plastic, glass and many other opaque or transparent materials. It operates at 12V dc so is therefore safe and easy to install and can switch up to 11 connected 12V dc LED fitting up to 30W maximum. The CAPSENS V13 switch is operated by lightly touching the surface of the material over the position where the sensor is concealed. Supplied with 2 metre power and switch cables with MiniPlug connectors and a distribution block, CAPSENS is truly the way forward in 12V dc LED control. CAPSENS V13 must be connected in line between the power supply and the LED fittings.

To operate the CAPSENS V13 switch, touch the area of the surface directly over where the sensor is concealed. It is possible to adjust the intensity of the connected LED lights by holding a finger on the ‘activation area’. A brief flash of the LED fitting connected to the CAPSENS V13 indicates that maximum brightness has been reached. The brightness level will be memorized until the next adjustment. The ‘activation’ area is about 50mm diameter and the maximum thickness of the material

30mm 12mm 20mm

on which CAPSENS is installed must not be 20mm for plastic. CAPSENS also integrates the functions ‘soft-start’ and ‘soft-stop’ and will automatically turn off after about 18 hours. A further feature of the CAPSENS V13 is ‘auto-on’ that automatically turns on the connected LED fittings at the previously set luminosity. This function is especially useful for the automatic turning on of a collection of Lights for example in a show room. When the main switches are turned on, the LED lighting will activate at their various pre-set brightness’s without having to adjust all the levels individually. *This data is indicative of the sensitivity of CAPSENS V13 and can increase or decrease dependant on the composition of the material to which the sensor is applied. CASPSENS V13 cannot be installed on or behind metalic surfaces and for other materials such as granite, marble and composites it is recommended that a preliminary test is carried out before final installation.

94

F u r n w a r e L i g h t i n g P r o d u c t S e l e c t i o n 2014

© Copyright 2014 All Rights Reserved. Prices & specifications subject to change without notice.

more than 30mm for wood, 12mm for glass or

Capsens V13 Sensor Total concealed touch switch Operates at 12 Volt Maximum load 30W @12V dc

12V

Supplied with distributor block allowing 11 lights to be connected 2m input and 2m output cables with MiniPlug Connectors Part No. DCAPSENS

© Copyright 2014 All Rights Reserved. Prices & specifications subject to change without notice.

Capsens set-up example

F re e C a l l 1 8 0 0 1 0 1 0 0 9

Fax 02 9548 6191

E m a i l s a l e s @ f u r n w a re . n e t . a u

We b s i t e w w w. f u r n w a re . n e t . a u

95

Furnware Lighting Product Selection

IFR Sensor The IFR Sensor is an electronic infrared sensor

IFR set-up example

switch for use with the DOMUS Line range of 12V dc LED lighting. The switch itself operates

12V

on 12V dc which makes it quick and safe to install. IFR Sensor is available in two versions; it can be surface mounted with concealed clips (IFR V12), or recessed into an 11mm deep recess (IFR V13). A 2 metre long power cable with MiniPlug connectors and a distributor block with provision for connection of 11 devices (maximum load is 30W @ 12V dc) are provided as standard. IFR Sensor must be connected in line between the power supply and the LED fittings.

IFR Sensor is an infrared sensor. The sensor detects changes in temperature associated with the movement of people and animals (approximately 36°C as shown in the diagram). When the sensor is activated, the fixture is turned on. The system remains on for 30 seconds. After this, if it does not detect other movements, it turns off automatically. For ideal operating conditions, the IFR Sensor must be installed out of direct sunlight and away from

© Copyright 2014 All Rights Reserved. Prices & specifications subject to change without notice.

sources of heat and electromagnetic radiation.

96

F u r n w a r e L i g h t i n g P r o d u c t S e l e c t i o n 2014

IFR V13 Sensor Matches Diva profile Infra-red sensor switch Operates at 12V dc

12V

Maximum load 30W @12V dc Supplied with distributor block with provision for connection of 11 lights with MiniPlug Connectors 2m input and 2m output cables with MiniPlug Connectors Part No.

Finish

DIFR.V13

ALU



IFR V12 Sensor Matches Twig profile Infra-red sensor switch Operates at 12V dc Maximum load 30W @12V dc

© Copyright 2014 All Rights Reserved. Prices & specifications subject to change without notice.

Supplied with distributor block with provision for connection of 11 lights with MiniPlug Connectors 2m input and 2m output cables with MiniPlug Connectors Part No.

Finish

DIFR.V12

ALU



F re e C a l l 1 8 0 0 1 0 1 0 0 9

Fax 02 9548 6191

E m a i l s a l e s @ f u r n w a re . n e t . a u

We b s i t e w w w. f u r n w a re . n e t . a u

97

Furnware Lighting Product Selection

TLD Sensor TLD Sensor is the latest in multi-function switches for LED lighting. Operating at 12V dc with a maximum load of 30w, it is available in

12V

two versions; it can be surface mounted with concealed clips (TLD V12), or recessed into an 11mm deep recess (TLD V13). A 2 metre long power cable with MiniPlug connectors and a distributor block with provision for connection of 11 devices (maximum load is 30W @ 12V dc) are provided as standard. TLD Sensor must be connected in line between the power supply and the LED fittings.

The switching on/off of the devices connected

TLD set-up example

to the TLD Sensor is carried out with the single touch of the LED on the TLD Sensor. It is possible to adjust the intensity of the light by holding a finger on the LED. A brief flash of the LED indicates that maximum brightness has been reached. The brightness level will be memorized until the next adjustment. The TLD Sensor also integrates a ‘night-light’ function which activates only when the devices are switched off. In a daylight or bright environment, the LED on the TLD Sensor glows with a soft dim light. With low or no light, the brightness of the LED increases providing a handy ‘night-light’ function. The ‘night-light’ function can be activated or deactivated by holding a finger on the TLD Sensor for the function will be notified by 2 slow flashes of the LED, or its activation by 3 fast flashes. The TLD Sensor is fitted with a safety program that turns off all connected devices after 18 hours of continuous operation. A further feature of the TLD Sensor is ‘auto-on’ that automatically turns on the connected LED fittings at the previously set luminosity. This function is especially useful for the automatic turning on of a collection of Lights for example in a show room. When the main light switches are turned on, the detail lighting will activate at their various pre-set brightness without having to adjust all the levels individually.

98

F u r n w a r e L i g h t i n g P r o d u c t S e l e c t i o n 2014

© Copyright 2014 All Rights Reserved. Prices & specifications subject to change without notice.

15 seconds after which, the deactivation of

TLD V13 Sensor Matches Diva profile Touch dimmer switch with unique night-light feature Operates at 12V dc

12V

Maximum load 30W @12V dc Supplied with distributor block with provision for connection of 11 lights with MiniPlug Connectors 2m input and 2m output cables with MiniPlug Connectors Part No.

Finish

DTLD.V13

ALU



TLD V12 Sensor Matches Twig profile Touch dimmer switch with unique night-light feature Infra-red sensor switch Operates at 12V dc

© Copyright 2014 All Rights Reserved. Prices & specifications subject to change without notice.

Maximum load 30W @12V dc Supplied with distributor block with provision for connection of 11 lights with MiniPlug Connectors 2m input and 2m output cables with MiniPlug Connectors Part No.

Finish

DTLD.V12

ALU



F re e C a l l 1 8 0 0 1 0 1 0 0 9

Fax 02 9548 6191

E m a i l s a l e s @ f u r n w a re . n e t . a u

We b s i t e w w w. f u r n w a re . n e t . a u

99

Furnware Lighting Product Selection

Pixel Collection Professional fixtures for accent lighting Materials: Brass Finishes: polished chrome, satin nickel Light sources: HP module LED Installation:

350mA

Flush and surface

The PIXEL collection offers the advantages of high lighting efficiency

Pixel V13

thanks to the High Power LED light, combined with a professional polymer lens prism that pilots and diffuses the light uniformly without shadows and smudges. The spotlight has a minimal visual impact and a small installation depth of only 13mm. It is made of brass with protective and high quality finishes that are sure to endure the test of time. Also available are spacers for surface installation and for installation on walls with an inclination of the light module that ensures

Pixel SP

uniform projection on the work surface and to assist in hiding the power cable. Now available in the new Natural White light. All PIXEL LEDs must be powered by a 350mA power supply of sufficient capacity.

© Copyright 2014 All Rights Reserved. Prices & specifications subject to change without notice.

Pixel OB

100

F u r n w a r e L i g h t i n g P r o d u c t S e l e c t i o n 2014

Pixel Collection

© Copyright 2014 All Rights Reserved. Prices & specifications subject to change without notice.

350mA

F re e C a l l 1 8 0 0 1 0 1 0 0 9

Fax 02 9548 6191

E m a i l s a l e s @ f u r n w a re . n e t . a u

We b s i t e w w w. f u r n w a re . n e t . a u

101

Furnware Lighting Product Selection

Pixel Collection Housing

Brass

Optic 40°

Finishes

Polished Chrome (CP)



Satin Nickel (SN)

Colour Appearance

Natural white

Colour Temperature

4000 Kelvin

Luminous Efficacy

107 lm/W

Colour Rendering Index

Ra 80

Colour Appearance

Warm white

Colour Temperature

3000 Kelvin

Luminous Efficacy

102 lm/W

Colour Rendering Index

Ra 80

© Copyright 2014 All Rights Reserved. Prices & specifications subject to change without notice.

350mA

Power supply

102

F u r n w a r e L i g h t i n g P r o d u c t S e l e c t i o n 2014

Flush Mounted Installation A Recessed installation with side pressure springs on wood panels

B Recessed installation with side pressure springs on wood panels

C Recessed installation with side pressure springs on metal panels

350mA PIXEL V13 is a universal fixture. It can be installed either flush in a through hole (A), flush in a blind hole of at least 13mm depth (B) or in metal sheet with a minimum thickness of 0.8mm (C). The fastening system is quick, does not require tools, and uses a lateral pressure harmonic steel spring. The 2 metre long power cable is fitted with BUS connectors. All PIXEL LED fittings must be wired in series and powered by a 350mA power supply.

Surface Installation Two types of spacers allow for surface installation of PIXEL. The SP version ensures symmetric projection; whereas the OB version with asymmetric projection lets you install the fixture on a vertical wall, allowing you to easily hide the cable behind the cabinet. The 20° angle ensures uniform lighting from the top.

© Copyright 2014 All Rights Reserved. Prices & specifications subject to change without notice.

Pixel SP V13

Pixel OB V13

F re e C a l l 1 8 0 0 1 0 1 0 0 9

Fax 02 9548 6191

E m a i l s a l e s @ f u r n w a re . n e t . a u

We b s i t e w w w. f u r n w a re . n e t . a u

103

Furnware Lighting Product Selection

Pixel Collection Pixel V13 Made in Italy to comply with Australian Standards High power 1.2W LED 350mA 2m cable with BUS connector Solid brass housing High efficiency optics giving a 40° beam angle Available in Chrome Plated or Satin Nickel Flush mounted or use spacers below

350mA

Fitting only. (For LED drivers see page 105). Part No.

Light Colour

Finish

DPX.WW

Warm White

CP, SN

DPX.NW

Natural White

CP, SN



Pixel SP Spacer Made in Italy to comply with Australian Standards Spacer for surface mounting of Pixel V13 lights only. (Light must be ordered separately above).

Part No.

Finish

DPXSP

CP, SN

Pixel OB Spacer Made in Italy to comply with Australian Standards

104

F u r n w a r e L i g h t i n g P r o d u c t S e l e c t i o n 2014

Spacer for angled surface mounting of Pixel V13 lights only. (Light must be ordered separately above).

Part No.

Finish

DPXOB

CP, SN

© Copyright 2014 All Rights Reserved. Prices & specifications subject to change without notice.



Extension Cable - BUS Connector Use for extending cables with BUS Connectors This cable should be kept to the minimum practical length possible and must not exceed 6m total length to avoid voltage drop Part No.

Length (L) m

DEXTHP.1M

1 metre

DEXTHP.2M

2 metre



350mA

BUS Connector - Jumper Wires Replacement jumper wires for 350mA system Part No. D350JW



© Copyright 2014 All Rights Reserved. Prices & specifications subject to change without notice.

350mA LED Drivers

Fully approved to Australian Standards Supplied with 2m lead and plug Supplied with BUS jumper wires and terminal block Part No.

Maximum Wattage

DSNP6.350

6W

DSNP15.350

15W

F re e C a l l 1 8 0 0 1 0 1 0 0 9

350mA LED Driver Capacity 6W - Suitable for 1 - 6 Pixel V09 lights 15W - Suitable for 6 - 12 Pixel V09 lights

Fax 02 9548 6191

E m a i l s a l e s @ f u r n w a re . n e t . a u

We b s i t e w w w. f u r n w a re . n e t . a u

105

Furnware Lighting Product Selection

LED Drivers 12V LED Drivers

12V

Fully approved to Australian Standards 2m Power lead Distribution block with 12 MiniPlug Socket distributor block connected Part No.

Maximum Wattage

Driver Body Size L x W x H mm

15W

120 x 45 x 20

30W

160 x 55 x 20

DSNP75.12

75W

200 x 60 x 30

350mA

DSNP15.12 DSNP30.12

12V dc - 350mA MiniConverter

Converts 350mA LED fittings to operate on 12V dc Maximum load 7.2W Can be used in a circuit with Domus Line switches which do not have a dimming function Part No. DMC12.350

© Copyright 2014 All Rights Reserved. Prices & specifications subject to change without notice.



106

F u r n w a r e L i g h t i n g P r o d u c t S e l e c t i o n 2014

350mA LED Drivers

Fully approved to Australian Standards 2m Power lead Distribution block with 6 BUS connectors and 5 BUS Jumper wires Part No.

Maximum Wattage

Driver Body Size L x W x H mm

DSNP6.350

6W

100 x 45 x 10

DSNP15.350

15W

120 x 45 x 20

© Copyright 2014 All Rights Reserved. Prices & specifications subject to change without notice.

350mA

F re e C a l l 1 8 0 0 1 0 1 0 0 9

Fax 02 9548 6191

E m a i l s a l e s @ f u r n w a re . n e t . a u

We b s i t e w w w. f u r n w a re . n e t . a u

107

Furnware Lighting Product Selection

Technical Information 1

1. Dimensions The dimensions of the drawings published in this catalogue are given in millimeters for standard models.

2

2. Photometry The values of colour temperature, luminous efficiency and colour rendering index correspond to the nominal values provided by the manufacturers of light sources (LED chips). Furnware assumes no responsibility for any errors or inaccuracies in those. Data related to luminance diagrams is indicative and the values corresponding to the linear devices are referred to the model of greatest length published.

3

3. Colours and Finishes The finishes and colours published in this catalogue are approximate and subject to technical changes related to the specific production processes of surface treatment (such as paint, anodising, galvanising, metallisation, etc..). Furnware recommends that you first check the product sample before making your purchase.

The images of the locations of the products are simulations and do not provide exclusive instructions for use and/or installation of same. In addition to that, because of the variables between the photographic development and printing processes, colours and shapes may differ from that of the original products.

108

F u r n w a r e L i g h t i n g P r o d u c t S e l e c t i o n 2014

© Copyright 2014 All Rights Reserved. Prices & specifications subject to change without notice.

4. Photos and Images 4

RCM supplier code: 5661

UNI EN ISO 9001: 2008 company certified

Member of the Italian Electrotechnical Committee

Member of the ECOLIGHT

Member of the Confederation of Italian Industry

Warranty Each unit is fully guaranteed for a period of 12 months from the date of delivery. From the warranty are excluded all defects caused by force majeure (lightning, fire, etc..), as well as any damage caused by improper use of equipment. The products must be installed and/or used in accordance with the specifications and instructions given by Furnware. They must also be installed and/or used in compliance with the provisions governing the installation

© Copyright 2014 All Rights Reserved. Prices & specifications subject to change without notice.

and/or use of electric material force in the country where the products are installed and/or used. To this end, the buyer expressly releases Furnware from any responsibility for improper use, failure to comply with safety standards, technical specifications and instructions for use. The warranty is void without fail in the event of tampering with the equipment by persons or technicians not specifically authorized by Furnware. The warranty does not cover normal wear and tear or the consequences of improper installation, nor the failure and/or breaks caused by inexperience and/or neglect.

F re e C a l l 1 8 0 0 1 0 1 0 0 9

Fax 02 9548 6191

E m a i l s a l e s @ f u r n w a re . n e t . a u

We b s i t e w w w. f u r n w a re . n e t . a u

109

Phone 02 9548 4888 Free Call 1800 101 009 Fax 02 9548 6191 Email [email protected] Website www.furnware.net.au FW151.08.2012

Postal PO Box 250 Engadine, NSW 2233 Head Office 18 Burns Road Heathcote, NSW 2233 Distribution Centre 1-5 Jessica Place Prestons, NSW 2170 ABN 78 588 941 715