Free Crochet Pattern Lion Brand Heartland Sorrento Ripple Shrug Pattern Number: L40753B. Designed by Teresa Chorzepa

Free Crochet Pattern Lion Brand® Heartland® Sorrento Ripple Shrug Pattern Number: L40753B Designed by Teresa Chorzepa. Free Crochet Pattern from Li...
Author: Shavonne Allen
3 downloads 0 Views 88KB Size
Free Crochet Pattern Lion Brand® Heartland® Sorrento Ripple Shrug Pattern Number: L40753B

Designed by Teresa Chorzepa.

Free Crochet Pattern from Lion Brand Yarn Lion Brand® Heartland® Sorrento Ripple Shrug Pattern Number: L40753B SKILL LEVEL: Easy + (Level 3) SIZE: One Size About 21 x 59 in. (53.5 x 150 cm) not including fringe. CORRECTIONS: None as of MATERIALS • 136-109 Lion Brand Heartland Yarn: Olympic 4 Balls • Lion Brand Crochet Hook - Size J-10 (6 mm) • Lion Brand Split Ring Stitch Markers • Lion Brand Large-Eye Blunt Needles (Set of 6)

Jul 27, 2016. To check for later updates, click here.

*Heartland (Article #136). Solids: 100% Acrylic Tweeds: 94% Acrylic, 6% Rayon; package size: Solids: 5oz/142g (251yd/230m) Tweeds: 4oz/113g (200yd/183m)

GAUGE: 1 ripple = about 4 in. (10 cm) measured from peak to peak. When you match the gauge in a pattern, your project will be the size specified in the pattern and the materials specified in the pattern will be sufficient. The needle or hook size called for in the pattern is based on what the designer used, but it is not unusual for gauge to vary from person to person. If it takes you fewer stitches and rows to make your swatch, try using a smaller size hook or needles; if more stitches and rows, try a larger size hook or needles. Making a Gauge Swatch STITCH EXPLANATION: dc2tog (worked over more than 2 sts or sps) Step 1: Yarn over, insert hook into first indicated st or sp and draw up a loop, yarn over and draw through 2 loops (first half of dc2tog complete); Step 2: Yarn over, insert hook into 2nd indicated st or sp (you will be skipping st(s) in between) and draw up a loop, yarn over, draw through 2 loops (second half of dc2tog complete); Step 3: Yarn over and draw through all 3 loops on hook (dc2tog complete). dc3tog (dc 3 sts together) (Yarn over, insert hook in next st and draw up a loop, yarn over, draw through 2 loops) 3 times, yarn over and draw through all 4 loops on hook – 2 sts decreased. dc4tog (dc 4 sts together) (Yarn over, insert hook in next st and draw up a loop, yarn over, draw through 2 loops) 4 times, yarn over and draw through all 5 loops on hook – 3 sts decreased. dc7tog (dc 7 sts together) (Yarn over, insert hook in next st and draw up a loop, yarn

over, draw through 2 loops) 7 times, yarn over and draw through all 8 loops on hook – 6 sts decreased. NOTES: 1. Shrug is worked in one piece, with slits for armholes. 2. An edging is worked around armholes and across long edges of completed Shrug.

SHRUG First Half Ch 63. Row 1 (RS): Dc in 4th ch from hook (skipped 3 ch count as first dc) and in each ch across – you will have 61 dc at the end of Row 1. Rows 2-4: Ch 3 (counts as first dc), turn, dc in next st and in each st across. Rows 5 and 7: Ch 3 (does not count as a st), turn, sk first st, dc3tog over next 3 sts, *ch 1, (tr in next st,

ch 1) twice, (tr, ch 1, tr) in next st, (ch 1, tr in next st) twice, ch 1, dc7tog over next 7 sts; rep from * to last 9 sts, ch 1, (tr in next st, ch 1) twice, (tr, ch 1, tr) in next st, (ch 1, tr in next st) twice, ch 1, dc4tog over last 4 sts – 5 ripples. Rows 6 and 8: Ch 3 (does not count as a st), turn, sk first st, dc in first ch-1 sp, *(dc in next tr, dc in next ch-1 sp) 5 times, dc in next tr, dc2tog over next 2 ch-1 sps, rep from * to last 6 ch-1 sps, (dc in next tr, dc in next ch-1 sp) 5 times, dc in next tr, dc2tog over last ch-1 sp and last st. Rows 9 and 10: Rep Row 2 – 61 dc. Divide for Armhole First Side Row 1 (RS): Ch 3 (counts as first dc), turn, dc in each of next 40 sts, 2 dc in next st, place a marker in next st, leave marked st and remaining 18 sts unworked – 43 dc. Row 2: Ch 3 (counts as first dc), turn, dc in next st and in each st across. Rows 3 and 5: Ch 3 (does not count as a st), turn, sk first st, dc3tog over next 3 sts, *ch 1, (tr in next st, ch 1) twice, (tr, ch 1, tr) in next st, (ch 1, tr in next st) twice, ch 1, dc7tog over next 7 sts; rep from * twice, (ch 1, tr in next st) twice, ch 1, work 2 tr in last st. Rows 4 and 6: Ch 3 (counts as first dc), turn, (dc in next tr, dc in next ch-1 sp) twice, dc in next tr, *dc2tog over next 2 ch-1 sps, (dc in next tr, dc in next ch-1 sp) 5 times, dc in next tr; rep from * twice, dc2tog over last ch-1 sp and last st. Rows 7-10: Rep Row 2 – 43 dc. Rows 11-14: Rep Rows 3-6. Enlarge last loop to keep it from unraveling, and remove hook. Do not cut yarn. Second Side From RS, join a 2nd ball of yarn with a sl st in marked st, and work across other side of armhole as follows: Row 1 (RS): Ch 3 (counts as first dc), dc in next st and in each st across – 19 dc. Row 2: Ch 3 (counts as first dc), turn, dc in next st and in each st across. Rows 3 and 5: Ch 4 (counts as 1 tr), turn, tr in first st, (ch 1, tr in next st) twice, ch 1, dc7tog over next 7 sts, ch 1, (tr in next st, ch 1) twice, (tr, ch 1, tr) in next st, (ch 1, tr in next st) twice, ch 1, dc4tog over last 4 sts. Rows 4 and 6: Ch 3 (does not count as a st), turn, sk first st, dc in first ch-1 sp, (dc in next tr, dc in next ch-1 sp) 5 times, dc in next tr, dc2tog over next 2 ch-1 sps, (dc in next tr, dc in next ch-1 sp) twice, dc in each of last 2 sts – 19 sts. Rows 7-10: Rep Row 2. Rows 11-14: Rep Rows 3-6. Fasten off. Rejoin Work Replace hook in enlarged loop, tighten loop, and work across both sides as follows: Row 1 (RS): Ch 3 (counts as first dc), dc in each st to last st of first side, dc2tog over last st of first side and first st of second side, dc in each st across – 61 sts. Rows 2-4: Ch 3 (counts as first dc), turn, dc in next st and in each st across. Rows 5 and 7: Ch 3 (does not count as a st), turn, sk first st, dc3tog over next 3 sts, *ch 1, (tr in next st, ch 1) twice, (tr, ch 1, tr) in next st, (ch 1, tr in next st) twice, ch 1, dc7tog over next 7 sts; rep from * to last 9 sts, ch 1, (tr in next st, ch 1) twice, (tr, ch 1, tr) in next st, (ch 1, tr in next st) twice, ch 1, dc4tog over last 4 sts. Rows 6 and 8: Ch 3 (does not count as a st), turn, sk first st, dc in first ch-1 sp, *(dc in next tr, dc in next ch-1 sp) 5 times, dc in next tr, dc2tog over next 2 ch-1 sps, rep from * to last 6 ch-1 sps, (dc in next tr, dc in next ch-1 sp) 5 times, dc in next tr, dc2tog over last ch-1 sp and last st. Rows 9-12: Rep Row 2 – 61 dc. Rows 13-16: Rep Rows 5-8. Rows 17-20: Rep Row 2. Fasten off. Second Half From WS, join yarn with a sl st at corner, so that you are ready to work across opposite side of foundation

ch. Row 1 (WS): Ch 3 (counts as first dc), dc in next st and in each st across – 61 dc. Beg with Row 2, work second half same as first half. Note: When working second half, all odd-numbered rows will be WS rows and all even-numbered rows will be RS rows. Fasten off. FINISHING Outside Edging From RS, join yarn with a sl st at corner, so that you are ready to work across one long side edge of Shrug. Row 1: Ch 1, work sc evenly across side edge – we worked about 170 sc, but you should work any number of sc to make a smooth edge. Row 2: Ch 3 (counts as first dc), turn, dc in next st and in each st across. Fasten off. Rep outside edging across opposite side edge. Armhole Edging From RS, join yarn with a sl st at one corner of either armhole. Rnd 1: Ch 1, work sc evenly spaced around armhole edge; join with sl st in first sc. Rnd 2: Ch 3 (counts as first dc), turn, dc in next st and in each st to end of rnd; join with sl st in top of beg ch. Fasten off. Rep edging on opposite armhole. Fringe Cut 3 strands of yarn, each about 13 in. (33 cm) long. Hold strands together and fold in half. With crochet hook, draw the fold through edge of Shrug, forming a loop. Pull ends of fringe through this loop. Pull to tighten. Make 31 fringes across each end of Shrug. Trim fringe ends. Weave in ends.

ABBREVIATIONS / REFERENCES Click for explanation and illustration beg = begin(s)(ning)

ch(s) = chain(s)

ch-space = space previously made

dc = double crochet

rep = repeat(s)(ing)

rnd(s) = round(s)

RS = right side

sc = single crochet

sk = skip

sl st = slip stitch

st(s) = stitch(es)

tr = treble (triple) crochet

WS = wrong side Learn to crochet instructions: http://www.lionbrand.com/learn/how-to-crochet Every effort has been made to have the knitting and crochet instructions accurate and complete. We cannot be responsible for variance of individual knitters and crocheters, human errors, or typographical mistakes. We want your project to be a success! If you need help with this or any other Lion Brand pattern, e-mail support is available 7 days per week. Just click here to explain your problem and someone will help you! For thousands of free patterns, visit our website www.LionBrand.com To order visit our website www.lionbrand.com or call: (800) 258-YARN (9276) any time!

When in New York City, visit the Lion Brand Yarn Studio where we have the largest selection of our yarns anywhere and over 100 classes and events monthly. 34 West 15th Street, NY, NY 10011 Copyright ©1998-2016 Lion Brand Yarn Company, all rights reserved. No pattern or other material may be reproduced -- mechanically, electronically, or by any other means, including photocopying -- without written permission of Lion Brand Yarn Company.

Suggest Documents