FLOOR COVERING ADHESIVES wftaylor.com
environmentally advanced adhesive solutions for precision performance
1
TAYLOR’S advanced solutions for precision performance
about W.F.Taylor Co., Inc.
META-TEC® ADHESIVE TECHNOLOGY – Patented Meta-Tec® adhesives are the latest advance in adhesive technology. Meta-Tec® products utilize cross-linking chemistry technology which creates a permanent bond that when fully cured is waterproof, extremely strong, and environmentally friendly. Meta-Tec® products are one-part formulations that replace and out-perform more costly epoxy, urethane, and acrylic adhesives and are easy to use, easy to clean up, and very installer friendly.
W.F. Taylor Co., Inc. – an industry leader in the development of floor covering adhesives and floor
preparation products – was founded in 1977 by Wallace F. Taylor, a well-respected chemist. In 1984 Taylor was sold to a British company who retained ownership until 1989 when the present management purchased the company.
A Healthy History – Envirotec® Taylor’s commitment to the environment was first demonstrated in the early 1990s with the development and introduction of its Envirotec ® Healthguard Adhesive Technology. Taylor’s Envirotec® line – the first environmentally friendly adhesive products – meets all the requirements of the CRI Green Label Plus™ Program and is the first to achieve the coveted Greenguard® Certification.
MS (MODIFIED SILANE) ADHESIVES – MS-Plus® adhesives with Meta-Tec® Technology are one component 100% solids products featuring a dual curing system based on Meta-Tec® cross-linking chemistry and modified silane polymer moisture cure. These unique products are solvent and isocyanate free, contain no hazardous ingredients, are non-flammable, and very low odor. MS-Plus® adhesives have very low VOC and meet all federal, state and local governmental regulations for indoor air quality. MS-Plus® adhesives feature early green strength and build to very high strength, yet resilient, waterproof bonds.
Continuing the Tradition – Patented Meta-Tec® and MS (Modified Silane) Advance Chemistry In early 2000, Taylor launched our patented Meta-Tec® technology and manufacturing process.
ENVIROTEC® ADHESIVES – Envirotec® adhesives have long been recognized by installers as the highest quality flooring adhesives in the industry. These products were the first environmentally friendly adhesives produced in the United States.
Meta-Tec® technology, as the name implies, signifies a dramatic shift in the development of high performance adhesives that consists of the use of renewable bio-based oils and resins along with a unique cross-linking system that achieves high shear strength and a waterproof cured bond. MS-Plus® Advance™ Chemistry
TOUCHDOWN® SPECIALTY PRODUCTS – Touchdown Specialty adhesives are a group of products developed for a variety of installation requirements for floor covering accessories.
In 2008, Taylor again built on the continuing success of the Meta-Tec® line with the introduction of MS-Plus® Advance™ Wood Flooring Adhesive. This revolutionary technology combines the patented backbone of Meta-Tec® reactive adhesive chemistry without the potentially dangerous MDI/TDI isocyanate found in conventional legacy urethane adhesives but maintains the moisture cure functionality. This is the most technologically advanced wood flooring adhesive available worldwide. It is also Greenguard® certified.
1410 PLATINUM MAC SYSTEM – A Taylor/Koester co-branded product. This one coat, solvent-free, water-based two component epoxy system contains a unique combination of epoxy resins and other chemical substances, specifically designed for reduction of moisture vapor transmission and alkalinity in concrete floors. It is specially formulated to overcome poor long term adhesion properties of adhesive systems when curing in an environment of constant wetness, extreme alkalinity (pH 13-14) and water vapor drive.
W.F. Taylor prides itself in the reputation it enjoys in the industry for being innovative pacesetters, for the quality of its products, and for the superior service we offer our customers. We will continue to promote environmentally safe products and encourage all in the industry to follow.
INDOOR AIR QUALITY (IAQ) – Taylor’s GreenGuard and CRI Green Label Plus Adhesives qualify for LEED points under US Green Building Council environmental criteria and meet specifications of California Section 01350 VOC Emission Requirements & SCAQMD Rule 1168.
Sincerely, META-SEPT® ANTI-MICROBIAL – A proprietary broad spectrum anti-microbial agent that protects the adhesive and coating films from the growth of micro-organisms that can damage flooring materials and contribute to flooring failures. Meta-Sept® is incorporated in all W.F. Taylor products.
Jack Raidy Jr., President W.F. Taylor Co., Inc.
2
Product information now available on-the-go! Taylor Adhesives Guide (TAG)™ - Scan to download free mobile app.
Service at W.F. Taylor has always meant far more than making and shipping high quality products. It also means being available when you need to reach us. Call Technical Service for product information, MSDS and Specification sheets, coverage and trowel recommendations. Available at www.wftaylor.com
West Coast: 800.397.4583 Toll-free 951.360.6677 Phone | 951.360.1177 Fax 11545 Pacific Ave, Fontana, CA 92337 866.818.7434 Customer Service West 800.868.4583 Ext: 221 Technical Service
East Coast: 800.868.4583 Toll-free 706.277.9767 Phone | 706.277.1363 Fax 209 Crown Lake Dr SE, Dalton, GA 30721 800.868.4583 Customer Service East 800.868.4583 Ext: 221 Technical Service
3
table of contents by product
Carpet Adhesives
Redi-Set® Film, Touchdown® 757................................................................... 8 Envirotec® 900, 2027....................................................................................... 8 Envirotec® 2055, 2056, 2057, 2060, 2070................................................ 9 Envirotec® 2072, 2080...................................................................................10 Meta-Tec® 2081, 2082...................................................................................10 Meta-Tec® 2089...............................................................................................11
table of contents by category
Redi-Set® Floor Installation Film.......................................................6 Latest product achievement from W.F. Taylor, the flooring adhesive innovator. Recognizing today’s need-for-speed fast track construction and the requirements of our health and environmentally conscious world, Taylor created this ready to use fully cured pressure sensitive adhesive film for installation of a broad variety of flooring products.
New & Upcoming Products Highlights..............................................7 Latest product announcements and snapshot on a single page.
Envirotec® 2085, 2100, 2902, 2903.........................................................11
Carpet Adhesives....................................................................................8 Resilient Flooring Adhesives
Envirotec® 501, 2033, 2037, 2060.............................................................12 Envirotec® 2070, 2072, 2080.......................................................................13
Used for the installation of all types of carpet backings including jute back, woven polypropylene, Action Bac®, hot-melt back, unitary back, vinyl back, urethane back, foam cushion back, woven carpet, rough backs, smooth backs, carpet to cushion, cushion to floor, and carpet tile over approved substrates.
Meta-Tec® 2083, 2084...................................................................................13
Wood Adhesives
Envirotec® 2085, 2087..................................................................................14
Resilient Flooring Adhesives.............................................................12
Meta-Tec® 2090, 2091, MS-Plus® Resilient™ MBA®..............................14
Used for the installation of all types of resilient flooring including felt-back sheet goods, vinyl sheet goods, linoleum, roll cork, vinyl plank, vinyl and rubber stair treads, luxury vinyl tile, cork tile, vinyl composition tile, vinyl and rubber tile, asphalt tile, foam-back parquet and over approved substrates.
Meta-Tec® MS-Plus® Advance™, 2071.......................................................15 Meta-Tec® 2020, 2049...................................................................................15
Wood Adhesives.................................................................................... 15 Ceramic Cove Base Specialty Adhesives & Systems
Touchdown® 1, 9..............................................................................................16
Specialty Adhesives & Systems
Touchdown® 105, 700, 705 Edge-Lock™, 710, BNW-05.....................17
Envirotec® 901, 2040.....................................................................................16 Touchdown® 720, 722, 725, 775.................................................................18 Platinum Mac System 1410..........................................................................19 Envirotec® 2025, 2062..................................................................................19 Touchdown® 2075...........................................................................................19
The wood adhesives are used for the installation of all types of wood flooring including dry back parquet, engineered plank, solid wood plank, and exotic woods over approved substrates.
Cove Base & Ceramic Adhesives...................................................... 16 The cove base product is used for the installation of both rubber and vinyl cove base over approved substrates. The ceramic product is used for the installation of glazed wall tile, ceramic mosaics, pavers, gauged slate, and quarry tile over approved substrates.
Specialty Adhesives & Systems........................................................ 17 The specialty products listed have various uses including carpet seaming, vinyl back carpet seaming, pedestal adhesion, pad adhesion, tack strip adhesion, adhesive removal, adhesive stripping, and contact adhesion. The system products are used for pH blocking, priming, and concrete moisture emission reduction.
Taylor Product Selection Chart............................................... 20 & 21 4
5
new products highlights new
2020
WOOD MASTER Wood Flooring Adhesive
Redi-Set ® Products RediSetFilm.com
PRODUCT
2020
DESCRIPTION
WOOD MASTER Wood Flooring Adhesive
SIZE
PACK
WEIGHT
COVERAGE (SQ.FT/GAL)
4 gal.
1
44 lbs.
Up to 80 sq.ft./gal.
A solvent free, low VOC, non-flammable, cream colored, smooth spreading synthetic polymer based adhesive developed for the interior installation of wood parquet and Engineered plank flooring. May be used on, above or below grade concrete. Wood Master 2020 may also be used over association grade plywood underlayment, well bonded vinyl sheet goods, underlayment grade particle board and underlayment grade OSB. Size: 4-gallon Maximum Moisture and pH Levels: CaCl2 Max. 3 lbs
RH Max. 75%
pH Range 5 to 9
Meta-Tec® MS-Plus® Resilient™ MBA®
new
Moisture Barrier Adhesive For Vinyl, Rubber, Fiberglass & Polyolefin Backed Flooring . PRODUCT
DESCRIPTION
SIZE
PACK
WEIGHT
COVERAGE (SQ.FT/GAL)
MS Plus®
Resilient™ MBA® (Moisture Barrier Adhesive)
2 gal.
1
27 lbs.
Up to 300 sq.ft./gal.
Size: 2-gallon Maximum Moisture and pH Levels: CaCl2 Max. 10 lbs RH Max. 90%
pH Range N/A
24 inch Redi-Set
®
12 inch Redi-Set®
2049
new
Floating Floor Tongue and Groove Adhesive
3.5 inch Redi-Set®
Tensioner Pair
PRODUCT
DESCRIPTION
SIZE
PACK
WEIGHT
COVERAGE (SQ.FT/GAL)
2049-16
Floating Floor Tongue and Groove Adhesive
16 oz
12
15 lbs.
N/A
Detail Picture
A premium adhesive that passes the stringent ANSI Type II water resistance test. It is a stable, self-cross linking emulsion which is best suited for edge gluing of all types of laminate and floating floors, even over radiant heat systems. Size: 16 oz, 1 (Qty. 12 in a case)
MS-Plus® Bond-N-Weld new Universal Vinyl Seam Sealer
Unit Size
Per Ctn
Ctn Wt.
Pallet Qty
Item No.
12" wide Floor Installation Film Roll
120 sq ft
1
5 lb
48
Rediset-12
24" wide Floor Installation Film Roll
240 sq ft
Product Description
PRODUCT
BNW 05
1
10 lb
64
Redi-Set Film Dispenser 6
75 linear ft
1 Pair
12
2
12 lb
18 lb
64
Bond N Weld Universal Vinyl Seam Sealer
SIZE
PACK
WEIGHT
COVERAGE
5 oz.
12
5 lbs.
N/A
Rediset-24
Rediset-3.5
4040
Coming Soon: Grip Tight Special Purpose Adhesive
FreshFloors™ PRODUCT
3.5" wide Wall Base Installation and Multi-Purpose Film Roll
DESCRIPTION
A non-flammable 100% solids, one component, cross linking, modified silane polymer based seam sealer formulated for the seaming of vinyl backed sheet goods. Replaces solvent seam welders. Size 5 oz tube (Qty. 12 in a case).
DESCRIPTION
new
SIZE
PACK
WEIGHT
PER PALLET
Living Floor Cleaner with MOI FreshFloors uses nature’s nano-technology to clean hardwood, ceramic, stone, resilient, laminate, carpet and rug floorings. One product replaces all other cleaners, stain removers and odor eliminators.
FFS-32
FreshFloors Living Floor Cleaner (with MOI)
32 oz.
12
30 lbs.
36 Cartons
FFS-1G
FreshFloors Living Floor Cleaner (with MOI)
1 gal
4
38 lbs.
39 Cartons
7
carpet adhesive solutions
carpet adhesive solutions
2055 Performance Plus Fast-Tack Carpet Adhesive Provides quick grab with fast suction and holding power for the interior installation of all non-vinyl backed carpet in direct glue down and double-stick installations. Bonds heavily embossed unitaries. Limited Lifetime Performance Warranty. Size: 4-gallon
Redi-Set® Installation Film Commercial (24"), DIY (12") and Wall Base
PRODUCT
RediSet®
DESCRIPTION
All Weather Carpet Adhesive
Outdoor
SIZE
PACK
WEIGHT
COVERAGE (SQ.FT/GAL)
24-inch
64
10 lbs
240 sq.ft.
12-inch
48
5 lbs.
120 sq.ft.
3.5-inch
64
12 lbs.
75 linear ft.
Use to install all types of carpet tiles, resilient (vinyl, rubber & fiberglass) backed flooring products, including vinyl composition tile (VCT), solid and luxury vinyl tile & plank, rubber and fiberglass tile & sheet goods, homogeneous & heterogeneous vinyl backed sheet goods and vinyl & rubber wall base. Use to install sound deadening foam underlayment, cork underlayment, and foam underlayment in double stick installations. Size: 24-inch; 12-inch and 3.5-inch
PRODUCT
DESCRIPTION
SIZE
PACK
WEIGHT
COVERAGE (SQ.FT/GAL)
2055
PERFORMANCE PLUS Fast-Tack Carpet Adhesive
4 gal.
1
43 lbs
Up to 120 sq.ft./gal.
757
DESCRIPTION
All Weather Outdoor Carpet Adhesive
SIZE
PACK
WEIGHT
1 qt.
12
34 lbs
1 gal.
4
43 lbs.
4 gal.
1
44 lbs.
COVERAGE (SQ.FT/GAL)
Up to 110 sq.ft./gal.
This all-weather adhesive is specially made for the permanent exterior installation of outdoor carpets, excluding vinyl-back and urethane unitaries. It is fast setting, has an exceptional longterm bond, is waterproof after curing and can be applied over a wide range of temperatures 40°F to 100°F (4.44°C to 37.80°C). Rain immediately after installation may slow drying but will not otherwise affect the bond. EXTREMELY FLAMMABLE: FOR OUTDOOR USE ONLY. FOR PROFESSIONAL USE ONLY. Size: 1-quart, 1-gallon, 4-gallon
PRODUCT
2056
DESCRIPTION
SIZE
PACK
WEIGHT
COVERAGE (SQ.FT/GAL)
Super Premium Commercial Carpet Adhesive
4 gal.
1
43 lbs
Up to 120 sq.ft./gal.
2057
DESCRIPTION
Commercial Patterned Carpet Adhesive
SIZE
PACK
WEIGHT
COVERAGE (SQ.FT/GAL)
4 gal.
1
43 lbs
Up to 120 sq.ft./gal.
Use this easy to spread, economy grade, latex based adhesive for the interior, direct glue down installation of non-vinyl backed carpet. Provides ample open time, strong wet tack and a waterresistant bond. Size: 4-gallon DESCRIPTION
SIZE
PACK
WEIGHT
COVERAGE (SQ.FT/GAL)
900
WORKHORSE General Purpose Adhesive
4 gal.
1
40 lbs.
Up to 110 sq.ft./gal.
RH Max. 75%
pH Range 5 to 9
CaCl2 Max. 5 lbs
RH Max. 85%
pH Range 5 to 9
Makes it easy to eliminate bow, skew, and elongation problems associated with patterned carpet. Use for the interior installation of carpet with all non-vinyl backings, including unitary, hot-melt and polyurethane laminate in direct glue down and double-stick applications. Requires no tack time and allows extended open time Size: 4-gallon Maximum Moisture and pH Levels: CaCl2 Max. 5 lbs
RH Max. 85%
pH Range 5 to 9
Multi-Purpose Flooring Adhesive
PRODUCT
2060
2027
Maximum Moisture and pH Levels:
2060
Maximum Moisture and pH Levels: CaCl2 Max. 5 lbs
A high solids, fast set carpet adhesive for all non-vinyl backed carpet backings including olefin, unitary, hot melt, and polyurethane laminate in direct glue down and double stick applications. Recommended by Shaw Industries for EcoWorx Broadloom. Size: 4-gallon
Commercial Patterned Carpet Adhesive
Workhorse General Purpose Adhesive
PRODUCT
pH Range 5 to 9
2057
PRODUCT
900
RH Max. 90%
Super Premium Commercial Carpet Adhesive Approved and warranted for use on EcoWorx ® Performance Broadloom
™
All Weather Exterior Carpet Adhesive
PRODUCT
CaCl2 Max. 8 lbs
2056
757 *Product 757C available to meet California SCAQMD
Maximum Moisture and pH Levels:
DESCRIPTION
Multi-Purpose Flooring Adhesive
SIZE
PACK
WEIGHT
COVERAGE (SQ.FT/GAL)
4 gal.
1
40 lbs
Up to 120 sq.ft./gal.
Quick drying, aggressive tack and fast legs distinguish this latex based adhesive. Use this latex based adhesive for the installation of most smooth-backed carpet and resilient sheet goods. Not for use with vinyl backings. Size: 4-gallon Maximum Moisture and pH Levels: CaCl2 Max. 5 lbs
RH Max. 75%
pH Range 5 to 9
Pressure Sensitive Adhesive An acrylic co-polymer adhesive formulated for the interior installation of vinyl-back carpet tiles, approved polyolefin-back tiles, solid vinyl tiles and cushion-to-substrate in double-stick installations. For releasable installations use the dry method, for permanent installations use the wet method. Size: 1-gallon, 4-gallon PRODUCT
2027
8
DESCRIPTION
Pressure Sensitive Adhesive
SIZE
PACK
WEIGHT
1 gal.
4
35 lbs.
4 gal.
1
35 lbs.
COVERAGE (SQ.FT/GAL)
Up to 350 sq.ft./gal.
Maximum Moisture and pH Levels:
2070 Power-Tac™ Contract Grade Adhesive
PRODUCT
CaCl2 Max. 8 lbs
RH Max. 90%
pH Range 5 to 9
- Carpet Tile
CaCl2 Max. 5 lbs
RH Max. 90%
pH Range 5 to 9
- Luxury Vinyl Tile
2070
DESCRIPTION
POWER-TAC Contract Grade Adhesive
SIZE
PACK
WEIGHT
COVERAGE (SQ.FT/GAL)
4 gal.
1
40 lbs
Up to 120 sq.ft./gal.
A high performance, latex based adhesive formulated to have aggressive tack with fast legs for the interior installation of most types of carpet and resilient sheet goods. Not for use with vinyl backings. Size: 4-gallon Maximum Moisture and pH Levels: CaCl2 Max. 5 lbs
RH Max. 80%
pH Range 5 to 9 9
carpet adhesive solutions 2072
2085
Multi-Purpose Latex Flooring Adhesive
Pro-Tac™ Dual Purpose Adhesive
For the interior installation of most types of carpet and felt backed sheet goods. Not for use with vinyl backings. Packaged for consumer use.
Fast grab, commercial-grade, dual purpose adhesive specially formulated for the needs of today’s professional installers. Seven Year Performance Warranty. PRODUCT
Size: 1-quart, 1-gallon
2085 PRODUCT
2072
DESCRIPTION
Multi-Purpose Latex Flooring Adhesive
SIZE
PACK
WEIGHT
1 qt.
12
30 lbs
1 gal.
4
39 lbs
COVERAGE (SQ.FT/GAL)
Up to 120 sq.ft./gal.
DESCRIPTION
PRO-TAC Dual-Purpose Adhesive
SIZE
PACK
WEIGHT
COVERAGE (SQ.FT/GAL)
4 gal.
1
40 lbs.
Up to 120 sq.ft./gal.
Maximum Moisture and pH Levels: CaCl2 Max. 5 lbs
RH Max. 75%
Size: 4-gallon Maximum Moisture and pH Levels: CaCl2 Max. 5 lbs
RH Max. 85%
pH Range 5 to 9
pH Range 5 to 9
2089 Tuff-Lok X-Link™ Outdoor Carpet Adhesive
2080 The Legend Dual-Purpose Commercial Grade Adhesive Dries fast, has aggressive tack and fast legs. Use this premium latex based adhesive for the interior installation of a wide variety of carpet and resilient floorings. Not for use with vinyl backings. PRODUCT
DESCRIPTION
2080
THE LEGEND Dual-Purpose Commercial Grade Adhesive
SIZE
PACK
4 gal.
1
WEIGHT
COVERAGE (SQ.FT/GAL)
42 lbs.
Up to 120 sq.ft./gal.
PRODUCT
2089
DESCRIPTION
TUFF-LOK X-LINK Outdoor Carpet Adhesive
SIZE
PACK
WEIGHT
COVERAGE (SQ.FT/GAL)
4 gal.
1
43 lbs.
Up to 120 sq.ft./gal.
2100
Maximum Moisture and pH Levels: CaCl2 Max. 5 lbs
RH Max. 90%
Delta Force Fast Grab Premium Carpet Adhesive
pH Range 5 to 9
Tuff-Lok X-Link™ Carpet Adhesive
PRODUCT
DESCRIPTION
SIZE
PACK
WEIGHT
COVERAGE (SQ.FT/GAL)
2100
DELTA FORCE Fast Grab Carpet Adhesive
4 gal.
1
40 lbs.
Up to 120 sq.ft./gal.
A non-flammable, high solids, advanced cross-linking resin blend adhesive. Recommended for the interior installation of commercial direct glue down and double-stick carpet (non-vinyl) installations over approved substrates.
2081
TUFF-LOK X-LINK Carpet Adhesive
SIZE
PACK
WEIGHT
COVERAGE (SQ.FT/GAL)
4 gal.
1
43 lbs.
Up to 120 sq.ft./gal.
RH Max. 90%
pH Range 5 to 9
PRODUCT
DESCRIPTION
SIZE
PACK
WEIGHT
COVERAGE (SQ.FT/GAL)
2902
Double Stick Adhesive for Patterned Carpets
4 gal.
1
40 lbs.
Up to 72 sq.ft./gal.
2082
PRODUCT
2082
10
DESCRIPTION
TUFF-LOK X-LINK Carpet Tile Adhesive
SIZE
PACK
WEIGHT
COVERAGE (SQ.FT/GAL)
4 gal.
1
35 lbs.
Up to 350 sq.ft./gal.
Maximum Moisture and pH Levels: CaCl2 Max. 5 lbs
RH Max. 90%
pH Range 5 to 9
Double Stick Adhesive for Patterned Carpets
Maximum Moisture and pH Levels: CaCl2 Max. 8 lbs
A fast tacking, solvent-free, premium adhesive for the interior installation of both direct glue down and double-stick carpet installations. Ten Year Performance Warranty. Size: 4-gallon
2902
Size: 4-gallon DESCRIPTION
Size: 4-gallon
Size: 4-gallon
2081
PRODUCT
A non-flammable, high solids, advanced cross-linking resin blend adhesive. Recommended for the interior and exterior installation of exterior grade (Action Bac®) unitary backed carpet, and rubber-backed carpet over approved substrates.
Taylor 2902 has been specially developed for the permanent installation of carpet to cushion in a double glue down application. Taylor 2902 is a high solids adhesive that can be used for the installation of woven, tufted secondary backed and smooth backed unitary carpet over approved cushions. Size: 4-gallon Maximum Moisture and pH Levels: CaCl2 Max. 5 lbs
RH Max. 90%
pH Range 5 to 9
Tuff-Lok X-Link™ Pressure Sensitive Carpet Tile Adhesive
2903
A non-flammable, high solids, advanced cross-linking resin blend adhesive. Recommended for the interior installation of vinyl backed carpet tile, urethane foam backed carpet tiles, approved polyolefin back tiles, vinyl tiles, and W.F. Taylor approved cushion-to-substrate in double-stick installations over approved substrates. Size: 4-gallon
Taylor 2903 is a versatile, non-flammable, water-based, clear acrylic co-polymer adhesive that can be used “wet or dry” on horizontal surfaces. Specifically designed for the interior installation of approved carpet cushion to substrate in a double stick installation, vinyl backed carpet, vinyl backed broadloom carpet and modular tiles, and it can also be used to install solid vinyl tiles. Do not use outdoors. Size: 4-gallon
Maximum Moisture and pH Levels: CaCl2 Max. 8 lbs
RH Max. 90%
pH Range 5 to 9
Pressure Sensitive Spray Grade Adhesive
PRODUCT
2903
DESCRIPTION
Pressure Sensitive Spray Grade Adhesive
SIZE
PACK
WEIGHT
COVERAGE (SQ.FT/GAL)
4 gal.
1
34 lbs.
Up to 350 sq.ft./gal.
Maximum Moisture and pH Levels: CaCl2 Max. 5 lbs
RH Max. 90%
pH Range 5 to 9 11
resilient flooring adhesive solutions 2070
resilient flooring adhesive solutions
Power-Tac™ Contract Grade Adhesive A high performance, latex based adhesive formulated to have aggressive tack with fast legs for the interior installation of most types of carpet and resilient sheet goods. Not for use with vinyl backings. PRODUCT
501 Solvent-Free Epoxy Flooring Adhesive
2070
DESCRIPTION
POWER-TAC Contract Grade Adhesive
SIZE
PACK
WEIGHT
COVERAGE (SQ.FT/GAL)
4 gal.
1
40 lbs.
Up to 120 sq.ft./gal.
Use this two-part, low VOC epoxy system to install vinyl and rubber flooring including hard to stick recycled products. Fast setting speeds installation. Size: 1-gallon PRODUCT
501
DESCRIPTION
Solvent-Free Epoxy Flooring Adhesive
SIZE
PACK
WEIGHT
COVERAGE (SQ.FT/GAL)
1 gal.
2
13 lbs.
Up to 250 sq.ft./gal.
RH Max. 85%
2072
DESCRIPTION
Multi-Purpose Latex Flooring Adhesive
SIZE
PACK
WEIGHT
2033
DESCRIPTION
Clear Thin Spread Tile Adhesive
SIZE
PACK
WEIGHT
1 qt.
12
27 lbs
1 gal.
4
35 lbs.
4 gal.
1
35 lbs.
COVERAGE (SQ.FT/GAL)
Up to 350 sq.ft./gal.
1 qt.
12
30 lbs.
1 gal.
4
39 lbs.
Up to 120 sq.ft./gal.
PRODUCT
DESCRIPTION
SIZE
PACK
WEIGHT
COVERAGE (SQ.FT/GAL)
2080
THE LEGEND Dual-Purpose Commercial Grade Adhesive
4 gal.
1
42 lbs.
Up to 120 sq.ft./gal.
Fiberglass Backed Sheet Vinyl Pressure Sensitive Adhesive
PRODUCT
2037
DESCRIPTION
Fiberglass Backed Sheet Vinyl Pressure Sensitive Adhesive
SIZE
PACK
WEIGHT
1-gal.
4
35 lbs.
COVERAGE (SQ.FT/GAL)
4 gal.
1
43 lbs.
Maximum Moisture and pH Levels: CaCl2 Max. 5 lbs
RH Max. 85%
PRODUCT
pH Range 5 to 9
DESCRIPTION
TUFF-LOK X-LINK VCT Adhesive
SIZE
PACK
WEIGHT
COVERAGE (SQ.FT/GAL)
4 gal.
1
35 lbs.
Up to 350 sq.ft./gal.
2060
12
Multi-Purpose Flooring Adhesive
PACK
WEIGHT
COVERAGE (SQ.FT/GAL)
4 gal.
1
40 lbs.
Up to 120 sq.ft./gal.
PRODUCT
Maximum Moisture and pH Levels: RH Max. 75%
pH Range 5 to 9
RH Max. 90%
pH Range 5 to 9
Size: 4-gallon Maximum Moisture and pH Levels: CaCl2 Max. 8 lbs
RH Max. 90%
pH Range 5 to 9
Tuff-Lok X-Link™ Linoleum Adhesive
Quick drying, aggressive tack and fast legs distinguish this latex based adhesive. Use this latex based adhesive for the installation of most smooth-backed carpet and resilient sheet goods. Not for use with vinyl backings. Size: 4-gallon
CaCl2 Max. 5 lbs
CaCl2 Max. 5 lbs
2084 Meta-Tec®
Multi-Purpose Flooring Adhesive
SIZE
Maximum Moisture and pH Levels:
A non-flammable, high solids, advanced cross-linking, resin blend, pressure sensitive adhesive. Recommended for the interior installation of vinyl composition tile (VCT), asphalt tile, and closed cell, foam-back hardwood parquet over approved substrates.
2060
DESCRIPTION
Size: 4-gallon
Tuff-Lok X-Link™ VCT Adhesive
2083
PRODUCT
pH Range 5 to 9
2083
A clear set, solvent free, pressure sensitive adhesive for the installation of fiberglass backed sheet goods over approved substrates. Fast drying for quick installation, flooring can be installed up to 24 hours after application. Coverage up to 400 square feet per gallon. Size: 1-gallon, 4-gallon
Up to 400 sq.ft./gal.
RH Max. 75%
Dries fast, has aggressive tack and fast legs. Use this premium latex based adhesive for the interior installation of a wide variety of carpet and felt backed sheet goods. Not for use with vinyl backings.
pH Range 5 to 9
2037
CaCl2 Max. 5 lbs
The Legend Dual-Purpose Commercial Grade Adhesive
Maximum Moisture and pH Levels: RH Max. 90%
Maximum Moisture and pH Levels:
2080
Size: 1-quart, 1-gallon, 4-gallon
CaCl2 Max. 8 lbs
pH Range 5 to 9
COVERAGE (SQ.FT/GAL)
Made for the interior installation of vinyl composition tile (VCT), asphalt tile, and closed-cell, foam-back hardwood parquet. This adhesive features excellent water resistance, high shear strength to reduce slippage, fast drying, and a long working time. PRODUCT
RH Max. 80%
For the interior installation of most types of carpet and felt backed sheet goods. Not for use with vinyl backings. Packaged for consumer use. Size: 1 quart, 1-gallon PRODUCT
Clear Thin Spread Tile Adhesive
CaCl2 Max. 5 lbs
Multi-Purpose Latex Flooring Adhesive
pH Range 5 to 9
2033
Maximum Moisture and pH Levels:
2072
Maximum Moisture and pH Levels: CaCl2 Max. 5 lbs
Size: 4-gallon
2084
DESCRIPTION
SIZE
PACK
WEIGHT
COVERAGE (SQ.FT/GAL)
TUFF-LOK X-LINK Linoleum Adhesive
4 gal.
1
43 lbs.
Up to 120 sq.ft./gal.
Taylor 2084, with patented Meta-Tec® technology, is a nonflammable, high-solids, advanced cross-linking resin blend adhesive recommended for the interior installation of linoleum and linoleum tile over approved substrates. Size: 4-gallon Maximum Moisture and pH Levels: CaCl2 Max. 5 lbs
RH Max. 90%
pH Range 5 to 9 13
resilient flooring adhesive solutions 2085 Pro-Tac™ Dual Purpose Adhesive
PRODUCT
2085
DESCRIPTION
PRO-TAC Dual Purpose Adhesive
SIZE
4 gal.
PACK
1
WEIGHT
COVERAGE (SQ.FT/GAL)
40 lbs.
Up to 120 sq.ft./gal.
wood adhesives
Fast grab, commercial-grade, dual purpose adhesive specially formulated for the needs of today’s professional installers. Seven Year Performance Warranty. Size: 4-gallon
Meta-Tec® MS-Plus® Advance™
Maximum Moisture and pH Levels: CaCl2 Max. 5 lbs
RH Max. 85%
Superior Performance Wood Flooring Adhesive
pH Range 5 to 9
2087 Evr-White™ Sheet Goods Adhesive A non-stain warranty supports this low odor adhesive used for the interior installation of felt backed resilient sheet goods. PRODUCT
2087
DESCRIPTION
EVR-WHITE Sheet Goods Adhesive
SIZE
PACK
WEIGHT
1 gal.
4
44 lbs.
4 gal.
1
44 lbs.
COVERAGE (SQ.FT/GAL)
Up to 180 sq.ft./gal.
MS Plus®
Size: 1-gallon, 4-gallon
2090
DESCRIPTION
Vinyl Back Floor Covering Adhesive
SIZE
PACK
WEIGHT
1 gal.
4
44 lbs.
4 gal.
1
40 lbs.
COVERAGE (SQ.FT/GAL)
Up to 250 sq.ft./gal.
DESCRIPTION
ADVANCE™ Wood Flooring Adhesive
SIZE
PACK
WEIGHT
COVERAGE (SQ.FT/GAL)
4 gal.
1
48 lbs.
60 to 80 sq.ft./gal.
CaCl2 Max. 5 lbs
RH Max. 75%
pH Range 5 to 9
2091
TUFF-GRIP Transitional Pressure Sensitive® (TPS) Vinyl & Rubber Flooring Adhesive for Tile, Plank & Sheet Goods
SIZE
PACK
WEIGHT
1 qt.
12
26 lbs.
1 gal.
4
36 lbs.
4 gal.
1
34 lbs.
COVERAGE (SQ.FT/GAL)
Up to 350 sq.ft./gal.
Tuff-Lok X-Link™ Wood Flooring Adhesive
Vinyl Back Floor Covering Adhesive
A non-flammable, high solids, waterproof, advanced crosslinking, resin blend adhesive recommended for the interior installation of engineered wood, solid wood up to ¾”, acrylic impregnated wood, and dry back parquet over approved substrates.
PRODUCT
Size: 1-gallon, 4-gallon 2071
Maximum Moisture and pH Levels: CaCl2 Max. 5 lbs
RH Max. 85%
DESCRIPTION
TUFF-LOK X-LINK Wood Flooring Adhesive
pH Range 5 to 9
SIZE
PACK
WEIGHT
30 oz.
12
34 lbs.
1 gal.
4
44 lbs.
4 gal.
1
44 lbs.
COVERAGE (SQ.FT/GAL)
60 to 80 sq.ft./gal.
This solvent-free, non-flammable, easy troweling product provides excellent installation for tile-over-tile applications, luxury vinyl tile and plank, solid vinyl tile and plank, vinyl composition tile, homogeneous vinyl sheet goods, rubber tile and sheet goods over both porous and non-porous substrates. Size: 1-quart, 1-gallon, 4-gallon
PRODUCT
2020
Maximum Moisture and pH Levels: CaCl2 Max. 8 lbs
RH Max. 90%
pH Range 5 to 9
- LVT & LVP
CaCl2 Max. 5 lbs
RH Max. 85%
pH Range 5 to 9
- Sheet Vinyl
DESCRIPTION
WOOD MASTER Wood Flooring Adhesive
SIZE
PACK
WEIGHT
COVERAGE (SQ.FT/GAL)
4 gal.
1
44 lbs.
Up to 80 sq.ft./gal.
PACK
WEIGHT
COVERAGE (SQ.FT/GAL)
MS Plus®
Resilient™ MBA® (Moisture Barrier Adhesive)
2 gal.
1
27 lbs.
Up to 300 sq.ft./gal.
14
RH Max. 75%
pH Range 5 to 9
new
Size: 2-gallon Maximum Moisture and pH Levels: CaCl2 Max. 10 lbs RH Max. 90%
pH Range N/A
A solvent free, low VOC, non-flammable, cream colored, smooth spreading synthetic polymer based adhesive developed for the interior installation of wood parquet and Engineered plank flooring. May be used on, above or below grade concrete. Wood Master 2020 may also be used over association grade plywood underlayment, well bonded vinyl sheet goods, underlayment grade particle board and underlayment grade OSB. Size: 4-gallon Maximum Moisture and pH Levels: CaCl2 Max. 3 lbs
RH Max. 75%
pH Range 5 to 9
2049
new
new
Floating Floor Tongue and Groove Adhesive
For Vinyl, Rubber, Fiberglass & Polyolefin Backed Flooring . SIZE
CaCl2 Max. 3 lbs
WOOD MASTER Wood Flooring Adhesive
Moisture Barrier Adhesive
DESCRIPTION
Size: 30-oz. cartridges, 1-gallon, 4-gallon Maximum Moisture and pH Levels:
2020
Meta-Tec® MS-Plus® Resilient™ MBA®
PRODUCT
pH Range N/A
2090
Tuff-Grip Transitional Pressure Sensitive® (TPS) Vinyl & Rubber Flooring Adhesive
DESCRIPTION
CaCl2 Max. 10 lbs RH Max. 90%
2071
2091
PRODUCT
Maximum Moisture and pH Levels:
Maximum Moisture and pH Levels:
This fast drying, hard set adhesive is ideal for the interior installation of solid vinyl tile and plank, approved polyolefin tile, vinyl backed sheet goods and vinyl backed carpet. Intended for full spread application only. Will not contribute to staining or plasticizer migration. For use over porous substrates only. PRODUCT
PRODUCT
Superior performance adhesive with Meta-Tec® Technology, is a one component 100% solids, MS polymer-based adhesive formulated for the interior installation of all types of wood flooring including solid wood up to ¾” and bamboo flooring over approved substrates. Eligible for ten year warranty for moisture reduction up to 10 lbs or 85% RH, and sound deadening to meet IIC & STC requirements, when applied with Taylor Glide-On™ trowel. Size: 4-gallon
PRODUCT
DESCRIPTION
SIZE
PACK
WEIGHT
COVERAGE (SQ.FT/GAL)
2049-16
Floating Floor Tongue and Groove Adhesive
16 oz
12
15 lbs.
N/A
A premium adhesive that passes the stringent ANSI Type II water resistance test. It is a stable, self-cross linking emulsion which is best suited for edge gluing of all types of laminate and floating floors, even over radiant heat systems. Size: 16 oz, 1 (Qty. 12 in a case) 15
ceramic cove base specialty adhesives and systems
specialty adhesives and systems
901
MS-Plus® Bond-N-Weld
Odyssey Type 1 Premium Ceramic Tile Adhesive
PRODUCT
901
DESCRIPTION
ODYSSEY Type 1 Premium Ceramic Tile Adhesive
SIZE
PACK
WEIGHT
1 gal.
4
56 lbs.
3.5 gal.
1
48 lbs.
COVERAGE (SQ.FT/GAL)
Up to 40 sq.ft./gal.
For the interior installation of ceramic wall and floor tile on vertical or horizontal surfaces. Virtually no tile slippage, easy spreading and a strong bond. Complies with ANSI 136.1, Type 1.
new
Bond N Weld Universal Vinyl Seam Sealer PRODUCT
BNW 05
DESCRIPTION
Bond N Weld Universal Vinyl Seam Sealer
SIZE
PACK
WEIGHT
COVERAGE
5 oz.
12
5 lbs.
N/A
Size: 1-gallon, 3.5-gallon
A non-flammable 100% solids, one component, cross linking, modified silane polymer based seam sealer formulated for the seaming of vinyl backed sheet goods. Size 5 oz tube (Qty. 12 in a case)
105 Pedestal Adhesive
2040
new & improved
Premium Cove Base Adhesive
PRODUCT
2040
DESCRIPTION
Premium Cove Base Adhesive
SIZE
PACK
WEIGHT
30 oz.
12
34 lbs.
1 qt.
12
38 lbs.
1 gal.
4
50 lbs.
2 gal.
1
24 lbs.
4 gal.
1
48 lbs.
COVERAGE
up to 280 linear feet of 4" cove base per gallon
For the interior installation of rubber and vinyl cove base. This hard setting, acrylic adhesive exhibits fast tack and wet suction for holding outside and inside corners. Water-resistant and will not contribute to staining, shrinkage or plasticizer migration.
PRODUCT
105
1
TOUCHDOWN Contact Cement Brush Grade (Flammable)
SIZE
PACK
WEIGHT
COVERAGE (SQ.FT/GAL)
1 pt. 1 qt. 1 gal. 4 gal. 53 gal.
12 12 4 1 1
14 lbs. 24 lbs. 30 lbs. 30 lbs. 411 lbs.
Up to 200 sq.ft./gal.
WEIGHT
COVERAGE
1 gal.
4
45 lbs.
150-160 Pedestals
DESCRIPTION
TOUCHDOWN Tackless Cement
SIZE
PACK
WEIGHT
1 qt.
12
25 lbs.
1 gal
4
32 lbs
COVERAGE
1000 linear feet/quart
Size: 1-pint, 1-quart, 1-gallon, 4-gallon, 53-gallon
Edge Sealing Adhesive Refill
PRODUCT
705
DESCRIPTION
EDGE-LOCK Edge Sealing Adhesive Refill
SIZE
PACK
WEIGHT
COVERAGE
1 qt..
12
26 lbs.
900 linear feet/quart
9
16
TOUCHDOWN Adhesive Remover & Stripper
PACK
WEIGHT
1 pt.
12
23 lbs.
1 qt.
12
45 lbs
COVERAGE (SQ.FT/GAL)
N/A
Size: 1-pint, 1-quart
Easy to use / fast drying formula. Seals cut edges ready for hot melt seams. Prevents edge raveling in carpets. Identifiable with the use of a black Light. Quick dry formula. NON-FLAMMABLE Size: 1-quart (Qty. 12 in a case)
710 Kwik Seam Latex Adhesive
Clean-up and adhesive removal solvent. SIZE
Size: 1-quart, 1-gallon
705 Edge-Lock™
FLAMMABLE This contact cement has a flash point over 20°F (-6.67°C) (T.O.C.) to comply with C.P.S.C. regulations for overthe-counter products (when in 1-gallon or smaller sizes). FLAMMABLE. FOR PROFESSIONAL USE ONLY.
Adhesive Remover/Stripper
DESCRIPTION
FLAMMABLE Specially formulated for bonding carpet tack strips to almost any flooring surface. High strength permits immediate power stretching. FLAMMABLE. FOR PROFESSIONAL USE ONLY.
Contact Cement – Brush Grade
9
PRODUCT
Size 1-gallon
Tackless Cement
1
DESCRIPTION
PACK
700
700
PRODUCT
TOUCHDOWN Pedestal Adhesive
SIZE
Size: 30-ounce cartridge, 1-quart, 1-gallon, 2-gallon, 4-gallon
PRODUCT
*Product 1NC available to meet California SCAQMD
DESCRIPTION
A synthetic polymer based adhesive that exceeds the CISCA Pedestal Overturning Moment Test requirements. It is a solventfree, non-flammable, VOC compliant adhesive developed for installing access floor pedestals.
PRODUCT
710
DESCRIPTION
TOUCHDOWN Kwik Seam Latex Adhesive
SIZE
PACK
WEIGHT
1 qt.
12
22 lbs.
1 gal
4
29 lbs
COVERAGE
900 linear feet/quart
Use this extremely fast-drying, natural adhesive for applying seaming tapes, joining padding, reinforcing seams, sealing raw edges, securing binding, patching carpet, replacing damaged nap and reinforcing weak backings. This white, easy to spread latex dries to a clear amber color. Excellent water resistance. Size: 1-quart, 1-gallon 17
specialty adhesives and systems FreshFloors™ PRODUCT
FFS-32
FFS-1G
DESCRIPTION
FreshFloors Living Floor Cleaner (with MOI) FreshFloors Living Floor Cleaner (with MOI)
new
SIZE
PACK
WEIGHT
PER PALLET
Living Floor Cleaner with MOI
32 oz.
12
30 lbs.
36 Cartons
FreshFloors uses nature’s nano-technology to clean hardwood, ceramic, stone, resilient, laminate, carpet and rug floorings. One product replaces all other cleaners, stain removers and odor eliminators.
1 gal
4
38 lbs.
39 Cartons
500 Encap 500 Adhesive Encapsulator PRODUCT
500
DESCRIPTION
ENCAP 500 Adhesive Encapsulator
SIZE
PACK
WEIGHT
1.25 gal unit.
1
13 lbs.
2.50 gal unit.
1
28 lbs
COVERAGE (SQ.FT/GAL)
270 sq.ft./gal.
A multi-functional two component, solvent free, water based epoxy barrier coating for encapsulating old cutback, multipurpose, and pressure sensitive adhesives. Size: 1.25 gal unit & 2.5 gal unit
720 Pad Cement
PRODUCT
720
DESCRIPTION
TOUCHDOWN Pad Cement
*Product 720C available to meet California SCAQMD
EXTREMELY FLAMMABLE Anchors carpet padding to any surface, effectively preventing slippage during power stretching. Dries fast – no tools or preparation needed.
COVERAGE (SQ.FT/GAL)
EXTREMELY FLAMMABLE. FOR PROFESSIONAL USE ONLY.
SIZE
1 gal.
PACK
4
WEIGHT
32 lbs.
N/A
Size: 1-gallon
1410 Platinum MAC System (Moisture, Alkali Control System)
PRODUCT
1410
DESCRIPTION
Taylor / Koester Platinum MAC System
SIZE
PACK
WEIGHT
COVERAGE (SQ.FT/GAL)
2.5 gal. unit
1
26 lbs.
200 sq.ft./gal.
722
SIZE
PACK
WEIGHT
COVERAGE (SQ.FT/GAL)
722
TOUCHDOWN Water-based Pad Adhesive
1 gal.
4
45 lbs.
N/A
Size: 1-gallon
PRODUCT
2025
DESCRIPTION
Universal Latex Primer
SIZE
PACK
WEIGHT
1 gal.
4
35 lbs.
4 gal
1
35 lbs
COVERAGE (SQ.FT/GAL)
500 sq.ft./gal.
725
PRODUCT
725
DESCRIPTION
TOUCHDOWN All Purpose Spray Adhesive
SIZE
PACK
WEIGHT
17 oz.
12
16 lbs.
N/A
PRODUCT
775
18
DESCRIPTION
TOUCHDOWN Carpet Seam Cement Natural
Size: 1-gallon, 4-gallon
Premium seam sealer is a solvent free sealer designed for seaming fiberglass sheet goods in direct glue down installations. PRODUCT
DESCRIPTION
SIZE
PACK
WEIGHT
COVERAGE (SQ.FT/GAL)
2062
Seam Sealer for Fiberglass Sheet Goods
8 oz.
12
9 lbs.
225 linear feet/8oz
775 *Product 775C available to meet California SCAQMD
An acrylic latex solution made for use as a primer coat on floor patch, acoustical concrete and other porous surfaces to prevent over absorption of adhesive and to ensure a better bond. Also use to neutralize excess alkali.
Seam Sealer for Fiberglass Sheet Goods
A non-wrinkling, pressure sensitive, all purpose spray that bonds to most materials including carpet, tile, fabrics, wood, hobby crafts, leather, etc. Size: 17-oz.
pH Range 13 to 14
2062
All Purpose Spray Adhesive
COVERAGE (SQ.FT/GAL)
CaCl2 Max. 10 lbs RH Max. 90%
Universal Latex Primer
A fast grabbing, easy to use, non-flammable, solvent-free carpet pad adhesive. Features fast wet suction and holding power, preventing slippage during power stretching. DESCRIPTION
Maximum Moisture and pH Levels:
2025
Water-Based Pad Adhesive
PRODUCT
One coat, solvent free, water-based two component epoxy system containing a unique combination of epoxy resins and other chemical substances, specifically designed for reduction of moisture vapor transmission and alkalinity in concrete floors.Size: 2.5 gallon unit
Size: 8 oz.
Carpet Seam Cement-Natural
2075
FLAMMABLE Permanently seam selvage edges and cross joints on carpet with 775. Not recommended for vinyl backed carpets.
Carpet Seam Adhesive
SIZE
PACK
WEIGHT
COVERAGE
FLAMMABLE. FOR PROFESSIONAL USE ONLY.
1 pt.
12
15 lbs.
1 qt.
12
28 lbs
900 linear feet/quart
Size: 1-quart, 1-pint.
For seaming non-vinyl backed carpets and sealing cut edges. PRODUCT
2075
DESCRIPTION
TOUCHDOWN Carpet Seam Adhesive
SIZE
PACK
WEIGHT
COVERAGE
1 qt.
12
27 lbs.
900 linear feet/quart
Size: 1-quart
19
TAYLOR’S Product Selection Chart
P
U
P
P
P
P
U
P
P
P
P
U
P
U
P
P
U
U
U
P
U
P
P
Patterned Carpet (All Backings Except Vinyl) Woven Carpet and US Axminster
B
P
6 ft. Vinyl Backings
P
U
Carpet Tile (Vinyl and Non-Vinyl)
U
U
G
Rubber Foam Back
U
U
U
G
B
G
P
P
U
P U
U P
U
U
HP backing - Vinyl Back Broadloom U
EcoWork Broadloom
Double Stick Seam Sealers
All except Vinyl and Urethane backings Cushion to Floor Carpet to Cushion
U
U U
U
U
U
U
U
U
G
B
P P
P
U
P
U
U
P
U
P
U
P U
Broadloom and Non-Vinyl Backed Carpet
U
Carpet Seam Edger G
Felt Back
Sheet Goods
G
U
Vinyl Back and Rubber Flooring Linoleum
G GU
GP
BU G
U
U
P U
Solid and Luxury Vinyl Tile and Plank
U P
U
U P
Vinyl Composition Tile (VCT)
PU
U
U
U
U
P
U
P
U
P
U
P
U UU
U
U
U
U UU
U
CERAMIC TILE
U
U
U
U
U
U
U
U
U
Engineered Wood Plank
U
U
P
Wood Parquet (Non-Foam Back)
U
U
P
U
P
PU
VCT Over Vinyl
U
U
U
U
U
U
U
U
Rubber Tile - Porous & Non-Porous Floors
U
U
U
U
U
U
U
U
P
PU
U
Wood Parquet Foam Back)
U
UU
U
Glazed Wall Tile, Ceramic Mosaics
U
Heavy Tile & Pavers
U U
Gauged Slate, Quarry Tile U
Rubber & Vinyl Rubber & Vinyl
U
U
U
U U
Contact Adhesive for all surfaces except vinyl Contact Cement Adhesive Remover/Stripper
SPECIALTY
U U
Solid Wood Plank/Parquet; Exotics and Bamboo
Access Floor Pedestal
U U U U
Universal Floor Primer U
Concrete Moisture/pH Control Adhesive Encapsulator All Purpose Spray
20
U
U
P
VCT Over VCT
Asphalt Tile
COVE BASE STAIR TREAD TACK STRIP
U
U
Tiles
P
U
U
Cork
WOOD FLOORING
U
U U
U
U
U
U
U
U
P
U
U
P
Fiberglass RESILIENT
B
Cork Vinyl Back (Porous Floor)
P
P
Residential Carpet Cushion
Outdoor Carpet
P
2075
P
U
2062
U
U
2025
U
U
1410
U
Polyurethane Foam (Attached Cushion)
775
Polyurethane Laminate
725
P
722
P
P
720
P
U
710
U
P
705
P
700
P
U
500
U
U
105
U
U
9
U
Hot Melt Back
SPECIALTY ADHESIVES AND SYSTEMS
1
Unitary w/ActionBac (Secondary)
901
P
COVE BASE AND CERAMIC
2040
P
2020
U
2071
P
MS+ ADVANCE
P
MS+ Resilient
U
Redi Set Film
U
2091
U
2090
P
Unitary Backings
WOOD ADHESIVES
RESILIENT
2070 501 2072 900 2080 2033 2083 2037 2084 2060 2085 2070 2087 2072 2090 2080 2091 2083 Redi Set Film 2084 MS+ Resilient 2085
P
P
2060
P
P
2037
Redi-Set Film
P
U
2033
2100
U
P
900
2081
P
P
501
2085
P
G
2903
2080
G
B
2902
2072
B
G
2090
2070
G
U
2089
2060
U
U
2082
2057
U
U
2027
U
G
900 G
Woven Polypropylene (Action Bac)
757
Jute Back
FLOORING TYPE
CARPET
RESILIENT
2056
CARPET
2087
B = BETTER G = GOOD 2055
U = ULTIMATE P = PREMIUM
U U
21
®
Meta-Tec Adhesives
®
EnviroTec Adhesives
TAYLOR’S Maximum Moisture and pH Levels
MS+
Product 900 2027 – Carpet Tile 2027 - LVT 2033 2037 2055 2056 2057 2060 2070 2072 2078 2080 2085 2087 2090 2100 2902 2903 2020 2071 2081 2082 2083 2084 2091 – LVT & LVP 2091 – Sheet Vinyl 1410 ® Redi-Set Film ® MS-Plus Advance ® ® MS-Plus Resilient MBA
CaCl2 Maximum 5 lbs. 8 lbs. 5 lbs. 8 lbs. 5 lbs. 8 lbs. 5 lbs. 5 lbs. 5 lbs. 5 lbs. 5 lbs. 5 lbs. 5 lbs. 5 lbs. 5 lbs. 5 lbs. 5 lbs. 5 lbs. 5 lbs. 3 lbs. 3 lbs. 8 lbs. 8 lbs. 8 lbs. 5 lbs. 8 lbs. 5 lbs. 10 lbs. 8 lbs. 10 lbs. 10 lbs.
RH Maximum 75% 90% 90% 90% 85% 90% 85% 85% 75% 80% 75% 80% 90% 85% 75% 85% 90% 90% 90% 75% 75% 90% 90% 90% 90% 90% 85% 90% 90% 90% 90%
pH Range 5 to 9 5 to 9 5 to 9 5 to 9 5 to 9 5 to 9 5 to 9 5 to 9 5 to 9 5 to 9 5 to 9 5 to 9 5 to 9 5 to 9 5 to 9 5 to 9 5 to 9 5 to 9 5 to 9 5 to 9 5 to 9 5 to 9 5 to 9 5 to 9 5 to 9 5 to 9 5 to 9 up to 13 – 14 5 to 9 N/A N/A
TAYLOR’S trowel chart Floor Covering Foam backed parquet, pad to floor in double stick carpet installations, cork tile, cork flooring and underlayments, stair tread, studded rubber and vinyl flooring, vinyl-backed carpet, conductive carpet tiles, and for certain applications over porous floors of linoleum and sheet flooring. For certain applications over porous floors of VCT and vinyl tiles, vinyl plank, sheet flooring, and rubber tiles; also linoleum, conductive carpet tiles over non-porous floors.
Trowel Dimensions 1/16" x 1/16" x 1/16" Sq. notch
(1.6mm x 1.6mm x 1.6mm Sq. notch) 1/16" x 1/32" x 1/32" U notch
(1.6mm x 0.8mm x 0.8mm U notch) 1/16" x 1/32" x 5/64" U notch
For certain applications over non-porous floors: VCT, vinyl tiles and planks, sheet flooring, and rubber tiles. (1.6mm x 0.8mm x 2.0mm U notch) 3/32" x 3/32" x 3/32" V notch
Smooth back carpets such as 6’ vinyl, attached polyurethane cushion, needlepunched, non-backed outdoor carpet, cove base. (2.4mm x 2.4mm x 2.4mm V notch) 1/8" x 1/8" x 1/16" V notch
Carpet: Action Bac, polyurethane laminate, smooth latex unitary, jute, hot melt. (3.2mm x 3.2mm x 1.6mm V notch) 1/8" x 1/8" x 1/16" U notch
Carpets: Rough latex unitary, Axminster, woven through the back, carpet to cushion in double stick installations. (3.2mm x 3.2mm x 1.6mm U notch) 1/8" x 1/8" x 1/8" Sq. notch
(3.2mm x 3.2mm x 3.2mm Sq. notch) 3/16" x 1/4" x 1/2" V notch
Thin gauged solid wood and exotic wood planks 7/16” thick and less (4.8mm x 6.4mm x 12.7mm V notch) 3/16" x 1/4" x 5/16" V notch
Engineered wood plank and solid wood and exotic wood planks greater than 7/16” thick. (4.8mm x 6.4mm x 7.9mm V notch)
Taylor Glide-On™ trowel for MS-Plus Wood Flooring Adhesive Single Coat Application......................................(Taylor Part No: 4036) (5mm x 6mm x 13mm V-notch) 3/16" x 5/32" Sawtooth
The above moisture and pH recommendations are limited to concrete slabs that are less than 1 year old. Both Calcium Chloride (ASTM F-1869) and Relative Humidity (ASTM F-2170) tests must be performed on the slab in accordance with the respective ASTM instructions, and be at or below the maximum allowable level. The moisture levels must also indicate a declining trend in Moisture Vapor Transmission (MVT) and Relative Humidity (RH). If either test (MVT or RH) exceeds the maximum allowable moisture level, other moisture remediation systems must be utilized. The pH levels must be within the above-recommended ranges. All adhesive label and specification sheet instructions must be followed. Slabs older than one year; slabs exhibiting rising MVT and/or RH; and slabs with a previous history of a moisture related failure are excluded from the above recommendations. The flooring manufacturer’s moisture limitations supersede all other recommendations.
(Up to 6.0) Up to 350 (Up to 9.0) Up to 400 (Up to 9.0) Up to 160 (Up to 4.0) Up to 110 (Up to 3.0) Up to 72 (Up to 2.0) Up to 80 (Up to 2.0) Up to 80 (Up to 2.0) Up to 60 (Up to 2.0) Up to 40 (Up to 1.0) Up to 60
Glazed wall tile, FRP. .........................................(Taylor Part No: 4035) (4.8mm x 4.0mm Sawtooth) 1/8" x 1/8" x 1/8" V notch
(Up to 2.0) Up to 80
Ceramic mosaics and gauges slate. (3.2mm x 3.2mm x 3.2mm V notch) 1/4" x 1/4" x 3/8" Sq. notch
(Up to 2.0) Up to 40
Heavy tile and pavers. (6.4mm x 6.4mm x 9.5mm Sq. notch)
Rev. 01/15/2013 22
Up to 250
Wood parquet.
3/16" x 1/4" x 1/2" Flat V-NOTCH
Maximum Moisture and pH Levels Limitations and Exclusions
Application Coverage sq. ft/gal (sq. meters/liters)
Note: Dimensions listed width x depth x spacing (flat). Coverage is approximate and may vary depending on porosity of substrate and the angle at which the trowel is held.
(Up to 1.0)
wftaylor.com 23
Product information now available on-the-go! Taylor Adhesives Guide (TAG)™ is a free mobile app available in iTunes and Google Play for most of your iOS (such as iPhone / iPad) and latest Android devices. Visit wftaylor.com from your device to download!
Service at W.F. Taylor has always meant far more than making and shipping high quality products. It also means being available when you need to reach us.
West Coast:
East Coast:
800.397.4583 Toll-free 951.360.6677 Phone | 951.360.1177 Fax
800.868.4583 Toll-free 706.277.9767 Phone | 706.277.1363 Fax
11545 Pacific Ave , Fontana, CA 92337 866.818.7434 Customer Service West 800.868.4583 Ext: 221 Technical Service
209 Crown Lake Dr SE, Dalton, GA 30721 800.868.4583 Customer Service East 800.868.4583 Ext: 221 Technical Service
Automated Fax Back System: Product information, MSDS and Specification sheets, Coverage, Trowel recommendations, Technical, (including Installation and Warranty information) is available online at our website www.wftaylor.com and 24 hours a day through the Taylor’s automated fax back system. Dial 951-360-6676 and follow the voice prompts. Distributed By:
PART # MKTCAT.0113
WFTAYLOR.COM
Meta-Tec® U.S. Patent # 6,706,789 Media Contact: Kristine Elledge Ext: 100 also on wftaylor.com
MS-Plus®, MS-Plus® Advance™, MS-Plus® Resilient MBA® (Moisture Barrier Adhesive), Transitional Pressure Sensitive (TPS)®, Meta-Tec® , Meta-Sept® , Envirotec-Healthguard® and Touchdown® are registered trademarks. Meta-Tec® U.S. Patent # 6,706,789 | © Copyright W.F. Taylor Co., Inc. / TAYLOR Adhesives. All rights reserved. All TAYLOR Adhesives are Made in USA
24